diff options
Diffstat (limited to 'include/linux/cdk.h')
| -rw-r--r-- | include/linux/cdk.h | 486 |
1 files changed, 486 insertions, 0 deletions
diff --git a/include/linux/cdk.h b/include/linux/cdk.h new file mode 100644 index 0000000..0908daf --- /dev/null +++ b/include/linux/cdk.h @@ -0,0 +1,486 @@ +/*****************************************************************************/ + +/* + * cdk.h -- CDK interface definitions. + * + * Copyright (C) 1996-1998 Stallion Technologies + * Copyright (C) 1994-1996 Greg Ungerer. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*****************************************************************************/ +#ifndef _CDK_H +#define _CDK_H +/*****************************************************************************/ + +#pragma pack(2) + +/* + * The following set of definitions is used to communicate with the + * shared memory interface of the Stallion intelligent multiport serial + * boards. The definitions in this file are taken directly from the + * document titled "Generic Stackable Interface, Downloader and + * Communications Development Kit". + */ + +/* + * Define the set of important shared memory addresses. These are + * required to initialize the board and get things started. All of these + * addresses are relative to the start of the shared memory. + */ +#define CDK_SIGADDR 0x200 +#define CDK_FEATADDR 0x280 +#define CDK_CDKADDR 0x300 +#define CDK_RDYADDR 0x262 + +#define CDK_ALIVEMARKER 13 + +/* + * On hardware power up the ROMs located on the EasyConnection 8/64 will + * fill out the following signature information into shared memory. This + * way the host system can quickly determine that the board is present + * and is operational. + */ +typedef struct cdkecpsig { + unsigned long magic; + unsigned short romver; + unsigned short cputype; + unsigned char panelid[8]; +} cdkecpsig_t; + +#define ECP_MAGIC 0x21504345 + +/* + * On hardware power up the ROMs located on the ONboard, Stallion and + * Brumbys will fill out the following signature information into shared + * memory. This way the host system can quickly determine that the board + * is present and is operational. + */ +typedef struct cdkonbsig { + unsigned short magic0; + unsigned short magic1; + unsigned short magic2; + unsigned short magic3; + unsigned short romver; + unsigned short memoff; + unsigned short memseg; + unsigned short amask0; + unsigned short pic; + unsigned short status; + unsigned short btype; + unsigned short clkticks; + unsigned short clkspeed; + unsigned short amask1; + unsigned short amask2; +} cdkonbsig_t; + +#define ONB_MAGIC0 0xf2a7 +#define ONB_MAGIC1 0xa149 +#define ONB_MAGIC2 0x6352 +#define ONB_MAGIC3 0xf121 + +/* + * Define the feature area structure. The feature area is the set of + * startup parameters used by the slave image when it starts executing. + * They allow for the specification of buffer sizes, debug trace, etc. + */ +typedef struct cdkfeature { + unsigned long debug; + unsigned long banner; + unsigned long etype; + unsigned long nrdevs; + unsigned long brdspec; + unsigned long txrqsize; + unsigned long rxrqsize; + unsigned long flags; +} cdkfeature_t; + +#define ETYP_DDK 0 +#define ETYP_CDK 1 + +/* + * Define the CDK header structure. This is the info that the slave + * environment sets up after it has been downloaded and started. It + * essentially provides a memory map for the shared memory interface. + */ +typedef struct cdkhdr { + unsigned short command; + unsigned short status; + unsigned short port; + unsigned short mode; + unsigned long cmd_buf[14]; + unsigned short alive_cnt; + unsigned short intrpt_mode; + unsigned char intrpt_id[8]; + unsigned char ver_release; + unsigned char ver_modification; + unsigned char ver_fix; + unsigned char deadman_restart; + unsigned short deadman; + unsigned short nrdevs; + unsigned long memp; + unsigned long hostp; + unsigned long slavep; + unsigned char hostreq; + unsigned char slavereq; + unsigned char cmd_reserved[30]; +} cdkhdr_t; + +#define MODE_DDK 0 +#define MODE_CDK 1 + +#define IMD_INTR 0x0 +#define IMD_PPINTR 0x1 +#define IMD_POLL 0xff + +/* + * Define the memory mapping structure. This structure is pointed to by + * the memp field in the stlcdkhdr struct. As many as these structures + * as required are layed out in shared memory to define how the rest of + * shared memory is divided up. There will be one for each port. + */ +typedef struct cdkmem { + unsigned short dtype; + unsigned long offset; +} cdkmem_t; + +#define TYP_UNDEFINED 0x0 +#define TYP_ASYNCTRL 0x1 +#define TYP_ASYNC 0x20 +#define TYP_PARALLEL 0x40 +#define TYP_SYNCX21 0x60 + +/*****************************************************************************/ + +/* + * Following is a set of defines and structures used to actually deal + * with the serial ports on the board. Firstly is the set of commands + * that can be applied to ports. + */ +#define ASYCMD (((unsigned long) 'a') << 8) + +#define A_NULL (ASYCMD | 0) +#define A_FLUSH (ASYCMD | 1) +#define A_BREAK (ASYCMD | 2) +#define A_GETPORT (ASYCMD | 3) +#define A_SETPORT (ASYCMD | 4) +#define A_SETPORTF (ASYCMD | 5) +#define A_SETPORTFTX (ASYCMD | 6) +#define A_SETPORTFRX (ASYCMD | 7) +#define A_GETSIGNALS (ASYCMD | 8) +#define A_SETSIGNALS (ASYCMD | 9) +#define A_SETSIGNALSF (ASYCMD | 10) +#define A_SETSIGNALSFTX (ASYCMD | 11) +#define A_SETSIGNALSFRX (ASYCMD | 12) +#define A_GETNOTIFY (ASYCMD | 13) +#define A_SETNOTIFY (ASYCMD | 14) +#define A_NOTIFY (ASYCMD | 15) +#define A_PORTCTRL (ASYCMD | 16) +#define A_GETSTATS (ASYCMD | 17) +#define A_RQSTATE (ASYCMD | 18) +#define A_FLOWSTATE (ASYCMD | 19) +#define A_CLEARSTATS (ASYCMD | 20) + +/* + * Define those arguments used for simple commands. + */ +#define FLUSHRX 0x1 +#define FLUSHTX 0x2 + +#define BREAKON -1 +#define BREAKOFF -2 + +/* + * Define the port setting structure, and all those defines that go along + * with it. Basically this structure defines the characteristics of this + * port: baud rate, chars, parity, input/output char cooking etc. + */ +typedef struct asyport { + unsigned long baudout; + unsigned long baudin; + unsigned long iflag; + unsigned long oflag; + unsigned long lflag; + unsigned long pflag; + unsigned long flow; + unsigned long spare1; + unsigned short vtime; + unsigned short vmin; + unsigned short txlo; + unsigned short txhi; + unsigned short rxlo; + unsigned short rxhi; + unsigned short rxhog; + unsigned short spare2; + unsigned char csize; + unsigned char stopbs; + unsigned char parity; + unsigned char stopin; + unsigned char startin; + unsigned char stopout; + unsigned char startout; + unsigned char parmark; + unsigned char brkmark; + unsigned char cc[11]; +} asyport_t; + +#define PT_STOP1 0x0 +#define PT_STOP15 0x1 +#define PT_STOP2 0x2 + +#define PT_NOPARITY 0x0 +#define PT_ODDPARITY 0x1 +#define PT_EVENPARITY 0x2 +#define PT_MARKPARITY 0x3 +#define PT_SPACEPARITY 0x4 + +#define F_NONE 0x0 +#define F_IXON 0x1 +#define F_IXOFF 0x2 +#define F_IXANY 0x4 +#define F_IOXANY 0x8 +#define F_RTSFLOW 0x10 +#define F_CTSFLOW 0x20 +#define F_DTRFLOW 0x40 +#define F_DCDFLOW 0x80 +#define F_DSROFLOW 0x100 +#define F_DSRIFLOW 0x200 + +#define FI_NORX 0x1 +#define FI_RAW 0x2 +#define FI_ISTRIP 0x4 +#define FI_UCLC 0x8 +#define FI_INLCR 0x10 +#define FI_ICRNL 0x20 +#define FI_IGNCR 0x40 +#define FI_IGNBREAK 0x80 +#define FI_DSCRDBREAK 0x100 +#define FI_1MARKBREAK 0x200 +#define FI_2MARKBREAK 0x400 +#define FI_XCHNGBREAK 0x800 +#define FI_IGNRXERRS 0x1000 +#define FI_DSCDRXERRS 0x2000 +#define FI_1MARKRXERRS 0x4000 +#define FI_2MARKRXERRS 0x8000 +#define FI_XCHNGRXERRS 0x10000 +#define FI_DSCRDNULL 0x20000 + +#define FO_OLCUC 0x1 +#define FO_ONLCR 0x2 +#define FO_OOCRNL 0x4 +#define FO_ONOCR 0x8 +#define FO_ONLRET 0x10 +#define FO_ONL 0x20 +#define FO_OBS 0x40 +#define FO_OVT 0x80 +#define FO_OFF 0x100 +#define FO_OTAB1 0x200 +#define FO_OTAB2 0x400 +#define FO_OTAB3 0x800 +#define FO_OCR1 0x1000 +#define FO_OCR2 0x2000 +#define FO_OCR3 0x4000 +#define FO_OFILL 0x8000 +#define FO_ODELL 0x10000 + +#define P_RTSLOCK 0x1 +#define P_CTSLOCK 0x2 +#define P_MAPRTS 0x4 +#define P_MAPCTS 0x8 +#define P_LOOPBACK 0x10 +#define P_DTRFOLLOW 0x20 +#define P_FAKEDCD 0x40 + +#define P_RXIMIN 0x10000 +#define P_RXITIME 0x20000 +#define P_RXTHOLD 0x40000 + +/* + * Define a structure to communicate serial port signal and data state + * information. + */ +typedef struct asysigs { + unsigned long data; + unsigned long signal; + unsigned long sigvalue; +} asysigs_t; + +#define DT_TXBUSY 0x1 +#define DT_TXEMPTY 0x2 +#define DT_TXLOW 0x4 +#define DT_TXHIGH 0x8 +#define DT_TXFULL 0x10 +#define DT_TXHOG 0x20 +#define DT_TXFLOWED 0x40 +#define DT_TXBREAK 0x80 + +#define DT_RXBUSY 0x100 +#define DT_RXEMPTY 0x200 +#define DT_RXLOW 0x400 +#define DT_RXHIGH 0x800 +#define DT_RXFULL 0x1000 +#define DT_RXHOG 0x2000 +#define DT_RXFLOWED 0x4000 +#define DT_RXBREAK 0x8000 + +#define SG_DTR 0x1 +#define SG_DCD 0x2 +#define SG_RTS 0x4 +#define SG_CTS 0x8 +#define SG_DSR 0x10 +#define SG_RI 0x20 + +/* + * Define the notification setting structure. This is used to tell the + * port what events we want to be informed about. Fields here use the + * same defines as for the asysigs structure above. + */ +typedef struct asynotify { + unsigned long ctrl; + unsigned long data; + unsigned long signal; + unsigned long sigvalue; +} asynotify_t; + +/* + * Define the port control structure. It is used to do fine grain + * control operations on the port. + */ +typedef struct { + unsigned long rxctrl; + unsigned long txctrl; + char rximdch; + char tximdch; + char spare1; + char spare2; +} asyctrl_t; + +#define CT_ENABLE 0x1 +#define CT_DISABLE 0x2 +#define CT_STOP 0x4 +#define CT_START 0x8 +#define CT_STARTFLOW 0x10 +#define CT_STOPFLOW 0x20 +#define CT_SENDCHR 0x40 + +/* + * Define the stats structure kept for each port. This is a useful set + * of data collected for each port on the slave. The A_GETSTATS command + * is used to retrieve this data from the slave. + */ +typedef struct asystats { + unsigned long opens; + unsigned long txchars; + unsigned long rxchars; + unsigned long txringq; + unsigned long rxringq; + unsigned long txmsgs; + unsigned long rxmsgs; + unsigned long txflushes; + unsigned long rxflushes; + unsigned long overruns; + unsigned long framing; + unsigned long parity; + unsigned long ringover; + unsigned long lost; + unsigned long rxstart; + unsigned long rxstop; + unsigned long txstart; + unsigned long txstop; + unsigned long dcdcnt; + unsigned long dtrcnt; + unsigned long ctscnt; + unsigned long rtscnt; + unsigned long dsrcnt; + unsigned long ricnt; + unsigned long txbreaks; + unsigned long rxbreaks; + unsigned long signals; + unsigned long state; + unsigned long hwid; +} asystats_t; + +/*****************************************************************************/ + +/* + * All command and control communication with a device on the slave is + * via a control block in shared memory. Each device has its own control + * block, defined by the following structure. The control block allows + * the host to open, close and control the device on the slave. + */ +typedef struct cdkctrl { + unsigned char open; + unsigned char close; + unsigned long openarg; + unsigned long closearg; + unsigned long cmd; + unsigned long status; + unsigned long args[32]; +} cdkctrl_t; + +/* + * Each device on the slave passes data to and from the host via a ring + * queue in shared memory. Define a ring queue structure to hold the + * vital information about each ring queue. Two ring queues will be + * allocated for each port, one for receive data and one for transmit + * data. + */ +typedef struct cdkasyrq { + unsigned long offset; + unsigned short size; + unsigned short head; + unsigned short tail; +} cdkasyrq_t; + +/* + * Each asynchronous port is defined in shared memory by the following + * structure. It contains a control block to command a device, and also + * the necessary data channel information as well. + */ +typedef struct cdkasy { + cdkctrl_t ctrl; + unsigned short notify; + asynotify_t changed; + unsigned short receive; + cdkasyrq_t rxq; + unsigned short transmit; + cdkasyrq_t txq; +} cdkasy_t; + +#pragma pack() + +/*****************************************************************************/ + +/* + * Define the set of ioctls used by the driver to do special things + * to the board. These include interrupting it, and initializing + * the driver after board startup and shutdown. + */ +#include <linux/ioctl.h> + +#define STL_BINTR _IO('s',20) +#define STL_BSTART _IO('s',21) +#define STL_BSTOP _IO('s',22) +#define STL_BRESET _IO('s',23) + +/* + * Define a set of ioctl extensions, used to get at special stuff. + */ +#define STL_GETPFLAG _IO('s',80) +#define STL_SETPFLAG _IO('s',81) + +/*****************************************************************************/ +#endif |
