diff options
Diffstat (limited to 'include/drm/drm_crtc.h')
| -rw-r--r-- | include/drm/drm_crtc.h | 225 |
1 files changed, 54 insertions, 171 deletions
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 8f3dee0..e55fccb 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -32,7 +32,6 @@ #include <linux/fb.h> #include <linux/hdmi.h> #include <drm/drm_mode.h> - #include <drm/drm_fourcc.h> struct drm_device; @@ -65,130 +64,14 @@ struct drm_object_properties { uint64_t values[DRM_OBJECT_MAX_PROPERTY]; }; -/* - * Note on terminology: here, for brevity and convenience, we refer to connector - * control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS, - * DVI, etc. And 'screen' refers to the whole of the visible display, which - * may span multiple monitors (and therefore multiple CRTC and connector - * structures). - */ - -enum drm_mode_status { - MODE_OK = 0, /* Mode OK */ - MODE_HSYNC, /* hsync out of range */ - MODE_VSYNC, /* vsync out of range */ - MODE_H_ILLEGAL, /* mode has illegal horizontal timings */ - MODE_V_ILLEGAL, /* mode has illegal horizontal timings */ - MODE_BAD_WIDTH, /* requires an unsupported linepitch */ - MODE_NOMODE, /* no mode with a matching name */ - MODE_NO_INTERLACE, /* interlaced mode not supported */ - MODE_NO_DBLESCAN, /* doublescan mode not supported */ - MODE_NO_VSCAN, /* multiscan mode not supported */ - MODE_MEM, /* insufficient video memory */ - MODE_VIRTUAL_X, /* mode width too large for specified virtual size */ - MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */ - MODE_MEM_VIRT, /* insufficient video memory given virtual size */ - MODE_NOCLOCK, /* no fixed clock available */ - MODE_CLOCK_HIGH, /* clock required is too high */ - MODE_CLOCK_LOW, /* clock required is too low */ - MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */ - MODE_BAD_HVALUE, /* horizontal timing was out of range */ - MODE_BAD_VVALUE, /* vertical timing was out of range */ - MODE_BAD_VSCAN, /* VScan value out of range */ - MODE_HSYNC_NARROW, /* horizontal sync too narrow */ - MODE_HSYNC_WIDE, /* horizontal sync too wide */ - MODE_HBLANK_NARROW, /* horizontal blanking too narrow */ - MODE_HBLANK_WIDE, /* horizontal blanking too wide */ - MODE_VSYNC_NARROW, /* vertical sync too narrow */ - MODE_VSYNC_WIDE, /* vertical sync too wide */ - MODE_VBLANK_NARROW, /* vertical blanking too narrow */ - MODE_VBLANK_WIDE, /* vertical blanking too wide */ - MODE_PANEL, /* exceeds panel dimensions */ - MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */ - MODE_ONE_WIDTH, /* only one width is supported */ - MODE_ONE_HEIGHT, /* only one height is supported */ - MODE_ONE_SIZE, /* only one resolution is supported */ - MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */ - MODE_NO_STEREO, /* stereo modes not supported */ - MODE_UNVERIFIED = -3, /* mode needs to reverified */ - MODE_BAD = -2, /* unspecified reason */ - MODE_ERROR = -1 /* error condition */ -}; - -#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \ - DRM_MODE_TYPE_CRTC_C) - -#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \ - .name = nm, .status = 0, .type = (t), .clock = (c), \ - .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \ - .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \ - .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \ - .vscan = (vs), .flags = (f), \ - .base.type = DRM_MODE_OBJECT_MODE - -#define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */ -#define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */ - -#define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF - -struct drm_display_mode { - /* Header */ - struct list_head head; - struct drm_mode_object base; - - char name[DRM_DISPLAY_MODE_LEN]; - - enum drm_mode_status status; - unsigned int type; - - /* Proposed mode values */ - int clock; /* in kHz */ - int hdisplay; - int hsync_start; - int hsync_end; - int htotal; - int hskew; - int vdisplay; - int vsync_start; - int vsync_end; - int vtotal; - int vscan; - unsigned int flags; - - /* Addressable image size (may be 0 for projectors, etc.) */ - int width_mm; - int height_mm; - - /* Actual mode we give to hw */ - int crtc_clock; /* in KHz */ - int crtc_hdisplay; - int crtc_hblank_start; - int crtc_hblank_end; - int crtc_hsync_start; - int crtc_hsync_end; - int crtc_htotal; - int crtc_hskew; - int crtc_vdisplay; - int crtc_vblank_start; - int crtc_vblank_end; - int crtc_vsync_start; - int crtc_vsync_end; - int crtc_vtotal; - - /* Driver private mode info */ - int private_size; - int *private; - int private_flags; - - int vrefresh; /* in Hz */ - int hsync; /* in kHz */ - enum hdmi_picture_aspect picture_aspect_ratio; +enum drm_connector_force { + DRM_FORCE_UNSPECIFIED, + DRM_FORCE_OFF, + DRM_FORCE_ON, /* force on analog part normally */ + DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ }; -static inline bool drm_mode_is_stereo(const struct drm_display_mode *mode) -{ - return mode->flags & DRM_MODE_FLAG_3D_MASK; -} +#include <drm/drm_modes.h> enum drm_connector_status { connector_status_connected = 1, @@ -387,6 +270,8 @@ struct drm_crtc_funcs { * @dev: parent DRM device * @head: list management * @base: base KMS object for ID tracking etc. + * @primary: primary plane for this CRTC + * @cursor: cursor plane for this CRTC * @enabled: is this CRTC enabled? * @mode: current mode timings * @hwmode: mode timings as programmed to hw regs @@ -422,8 +307,9 @@ struct drm_crtc { struct drm_mode_object base; - /* framebuffer the connector is currently bound to */ - struct drm_framebuffer *fb; + /* primary and cursor planes for CRTC */ + struct drm_plane *primary; + struct drm_plane *cursor; /* Temporary tracking of the old fb while a modeset is ongoing. Used * by drm_mode_set_config_internal to implement correct refcounting. */ @@ -540,13 +426,6 @@ struct drm_encoder { void *helper_private; }; -enum drm_connector_force { - DRM_FORCE_UNSPECIFIED, - DRM_FORCE_OFF, - DRM_FORCE_ON, /* force on analog part normally */ - DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ -}; - /* should we poll this connector for connects and disconnects */ /* hot plug detectable */ #define DRM_CONNECTOR_POLL_HPD (1 << 0) @@ -665,6 +544,12 @@ struct drm_plane_funcs { struct drm_property *property, uint64_t val); }; +enum drm_plane_type { + DRM_PLANE_TYPE_OVERLAY, + DRM_PLANE_TYPE_PRIMARY, + DRM_PLANE_TYPE_CURSOR, +}; + /** * drm_plane - central DRM plane control structure * @dev: DRM device this plane belongs to @@ -677,6 +562,7 @@ struct drm_plane_funcs { * @fb: currently bound fb * @funcs: helper functions * @properties: property tracking for this plane + * @type: type of plane (overlay, primary, cursor) */ struct drm_plane { struct drm_device *dev; @@ -694,6 +580,8 @@ struct drm_plane { const struct drm_plane_funcs *funcs; struct drm_object_properties properties; + + enum drm_plane_type type; }; /** @@ -856,7 +744,15 @@ struct drm_mode_config { struct list_head bridge_list; int num_encoder; struct list_head encoder_list; - int num_plane; + + /* + * Track # of overlay planes separately from # of total planes. By + * default we only advertise overlay planes to userspace; if userspace + * sets the "universal plane" capability bit, we'll go ahead and + * expose all planes. + */ + int num_overlay_plane; + int num_total_plane; struct list_head plane_list; int num_crtc; @@ -878,6 +774,7 @@ struct drm_mode_config { struct list_head property_blob_list; struct drm_property *edid_property; struct drm_property *dpms_property; + struct drm_property *plane_type_property; /* DVI-I properties */ struct drm_property *dvi_i_subconnector_property; @@ -930,6 +827,11 @@ extern void drm_modeset_lock_all(struct drm_device *dev); extern void drm_modeset_unlock_all(struct drm_device *dev); extern void drm_warn_on_modeset_not_all_locked(struct drm_device *dev); +extern int drm_crtc_init_with_planes(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_plane *primary, + void *cursor, + const struct drm_crtc_funcs *funcs); extern int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc, const struct drm_crtc_funcs *funcs); @@ -981,19 +883,31 @@ static inline bool drm_encoder_crtc_ok(struct drm_encoder *encoder, return !!(encoder->possible_crtcs & drm_crtc_mask(crtc)); } +extern int drm_universal_plane_init(struct drm_device *dev, + struct drm_plane *plane, + unsigned long possible_crtcs, + const struct drm_plane_funcs *funcs, + const uint32_t *formats, + uint32_t format_count, + enum drm_plane_type type); extern int drm_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, uint32_t format_count, - bool priv); + bool is_primary); extern void drm_plane_cleanup(struct drm_plane *plane); extern void drm_plane_force_disable(struct drm_plane *plane); +extern int drm_crtc_check_viewport(const struct drm_crtc *crtc, + int x, int y, + const struct drm_display_mode *mode, + const struct drm_framebuffer *fb); extern void drm_encoder_cleanup(struct drm_encoder *encoder); extern const char *drm_get_connector_name(const struct drm_connector *connector); extern const char *drm_get_connector_status_name(enum drm_connector_status status); +extern const char *drm_get_subpixel_order_name(enum subpixel_order order); extern const char *drm_get_dpms_name(int val); extern const char *drm_get_dvi_i_subconnector_name(int val); extern const char *drm_get_dvi_i_select_name(int val); @@ -1006,34 +920,10 @@ extern struct edid *drm_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter); extern struct edid *drm_edid_duplicate(const struct edid *edid); extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid); -extern void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode); -extern void drm_mode_copy(struct drm_display_mode *dst, const struct drm_display_mode *src); -extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, - const struct drm_display_mode *mode); -extern void drm_mode_debug_printmodeline(const struct drm_display_mode *mode); extern void drm_mode_config_init(struct drm_device *dev); extern void drm_mode_config_reset(struct drm_device *dev); extern void drm_mode_config_cleanup(struct drm_device *dev); -extern void drm_mode_set_name(struct drm_display_mode *mode); -extern bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2); -extern bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2); -extern int drm_mode_width(const struct drm_display_mode *mode); -extern int drm_mode_height(const struct drm_display_mode *mode); - -/* for us by fb module */ -extern struct drm_display_mode *drm_mode_create(struct drm_device *dev); -extern void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode); -extern void drm_mode_validate_size(struct drm_device *dev, - struct list_head *mode_list, - int maxX, int maxY, int maxPitch); -extern void drm_mode_prune_invalid(struct drm_device *dev, - struct list_head *mode_list, bool verbose); -extern void drm_mode_sort(struct list_head *mode_list); -extern int drm_mode_hsync(const struct drm_display_mode *mode); -extern int drm_mode_vrefresh(const struct drm_display_mode *mode); -extern void drm_mode_set_crtcinfo(struct drm_display_mode *p, - int adjust_flags); -extern void drm_mode_connector_list_update(struct drm_connector *connector); + extern int drm_mode_connector_update_edid_property(struct drm_connector *connector, struct edid *edid); extern int drm_object_property_set_value(struct drm_mode_object *obj, @@ -1081,8 +971,6 @@ extern const char *drm_get_encoder_name(const struct drm_encoder *encoder); extern int drm_mode_connector_attach_encoder(struct drm_connector *connector, struct drm_encoder *encoder); -extern void drm_mode_connector_detach_encoder(struct drm_connector *connector, - struct drm_encoder *encoder); extern int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, int gamma_size); extern struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, @@ -1137,16 +1025,6 @@ extern bool drm_detect_monitor_audio(struct edid *edid); extern bool drm_rgb_quant_range_selectable(struct edid *edid); extern int drm_mode_page_flip_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, - int hdisplay, int vdisplay, int vrefresh, - bool reduced, bool interlaced, bool margins); -extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, - int hdisplay, int vdisplay, int vrefresh, - bool interlaced, int margins); -extern struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev, - int hdisplay, int vdisplay, int vrefresh, - bool interlaced, int margins, int GTF_M, - int GTF_2C, int GTF_K, int GTF_2J); extern int drm_add_modes_noedid(struct drm_connector *connector, int hdisplay, int vdisplay); extern void drm_set_preferred_mode(struct drm_connector *connector, @@ -1195,4 +1073,9 @@ static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev, return mo ? obj_to_encoder(mo) : NULL; } +/* Plane list iterator for legacy (overlay only) planes. */ +#define drm_for_each_legacy_plane(plane, planelist) \ + list_for_each_entry(plane, planelist, head) \ + if (plane->type == DRM_PLANE_TYPE_OVERLAY) + #endif /* __DRM_CRTC_H__ */ |
