diff options
Diffstat (limited to 'include/asm-xtensa/xtensa/config-linux_be/system.h')
| -rw-r--r-- | include/asm-xtensa/xtensa/config-linux_be/system.h | 198 |
1 files changed, 0 insertions, 198 deletions
diff --git a/include/asm-xtensa/xtensa/config-linux_be/system.h b/include/asm-xtensa/xtensa/config-linux_be/system.h deleted file mode 100644 index cf9d4d3..0000000 --- a/include/asm-xtensa/xtensa/config-linux_be/system.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * xtensa/config/system.h -- HAL definitions that are dependent on SYSTEM configuration - * - * NOTE: The location and contents of this file are highly subject to change. - * - * Source for configuration-independent binaries (which link in a - * configuration-specific HAL library) must NEVER include this file. - * The HAL itself has historically included this file in some instances, - * but this is not appropriate either, because the HAL is meant to be - * core-specific but system independent. - */ - -/* - * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - - -#ifndef XTENSA_CONFIG_SYSTEM_H -#define XTENSA_CONFIG_SYSTEM_H - -/*#include <xtensa/hal.h>*/ - - - -/*---------------------------------------------------------------------- - DEVICE ADDRESSES - ----------------------------------------------------------------------*/ - -/* - * Strange place to find these, but the configuration GUI - * allows moving these around to account for various core - * configurations. Specific boards (and their BSP software) - * will have specific meanings for these components. - */ - -/* I/O Block areas: */ -#define XSHAL_IOBLOCK_CACHED_VADDR 0xE0000000 -#define XSHAL_IOBLOCK_CACHED_PADDR 0xF0000000 -#define XSHAL_IOBLOCK_CACHED_SIZE 0x0E000000 - -#define XSHAL_IOBLOCK_BYPASS_VADDR 0xF0000000 -#define XSHAL_IOBLOCK_BYPASS_PADDR 0xF0000000 -#define XSHAL_IOBLOCK_BYPASS_SIZE 0x0E000000 - -/* System ROM: */ -#define XSHAL_ROM_VADDR 0xEE000000 -#define XSHAL_ROM_PADDR 0xFE000000 -#define XSHAL_ROM_SIZE 0x00400000 -/* Largest available area (free of vectors): */ -#define XSHAL_ROM_AVAIL_VADDR 0xEE00052C -#define XSHAL_ROM_AVAIL_VSIZE 0x003FFAD4 - -/* System RAM: */ -#define XSHAL_RAM_VADDR 0xD0000000 -#define XSHAL_RAM_PADDR 0x00000000 -#define XSHAL_RAM_VSIZE 0x08000000 -#define XSHAL_RAM_PSIZE 0x10000000 -#define XSHAL_RAM_SIZE XSHAL_RAM_PSIZE -/* Largest available area (free of vectors): */ -#define XSHAL_RAM_AVAIL_VADDR 0xD0000370 -#define XSHAL_RAM_AVAIL_VSIZE 0x07FFFC90 - -/* - * Shadow system RAM (same device as system RAM, at different address). - * (Emulation boards need this for the SONIC Ethernet driver - * when data caches are configured for writeback mode.) - * NOTE: on full MMU configs, this points to the BYPASS virtual address - * of system RAM, ie. is the same as XSHAL_RAM_* except that virtual - * addresses are viewed through the BYPASS static map rather than - * the CACHED static map. - */ -#define XSHAL_RAM_BYPASS_VADDR 0xD8000000 -#define XSHAL_RAM_BYPASS_PADDR 0x00000000 -#define XSHAL_RAM_BYPASS_PSIZE 0x08000000 - -/* Alternate system RAM (different device than system RAM): */ -#define XSHAL_ALTRAM_VADDR 0xCEE00000 -#define XSHAL_ALTRAM_PADDR 0xC0000000 -#define XSHAL_ALTRAM_SIZE 0x00200000 - - -/*---------------------------------------------------------------------- - * DEVICE-ADDRESS DEPENDENT... - * - * Values written to CACHEATTR special register (or its equivalent) - * to enable and disable caches in various modes. - *----------------------------------------------------------------------*/ - -/*---------------------------------------------------------------------- - BACKWARD COMPATIBILITY ... - ----------------------------------------------------------------------*/ - -/* - * NOTE: the following two macros are DEPRECATED. Use the latter - * board-specific macros instead, which are specially tuned for the - * particular target environments' memory maps. - */ -#define XSHAL_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS /* disable caches in bypass mode */ -#define XSHAL_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT /* default setting to enable caches (no writeback!) */ - -/*---------------------------------------------------------------------- - ISS (Instruction Set Simulator) SPECIFIC ... - ----------------------------------------------------------------------*/ - -#define XSHAL_ISS_CACHEATTR_WRITEBACK 0x1122222F /* enable caches in write-back mode */ -#define XSHAL_ISS_CACHEATTR_WRITEALLOC 0x1122222F /* enable caches in write-allocate mode */ -#define XSHAL_ISS_CACHEATTR_WRITETHRU 0x1122222F /* enable caches in write-through mode */ -#define XSHAL_ISS_CACHEATTR_BYPASS 0x2222222F /* disable caches in bypass mode */ -#define XSHAL_ISS_CACHEATTR_DEFAULT XSHAL_ISS_CACHEATTR_WRITEBACK /* default setting to enable caches */ - -/* For Coware only: */ -#define XSHAL_COWARE_CACHEATTR_WRITEBACK 0x11222222 /* enable caches in write-back mode */ -#define XSHAL_COWARE_CACHEATTR_WRITEALLOC 0x11222222 /* enable caches in write-allocate mode */ -#define XSHAL_COWARE_CACHEATTR_WRITETHRU 0x11222222 /* enable caches in write-through mode */ -#define XSHAL_COWARE_CACHEATTR_BYPASS 0x22222222 /* disable caches in bypass mode */ -#define XSHAL_COWARE_CACHEATTR_DEFAULT XSHAL_COWARE_CACHEATTR_WRITEBACK /* default setting to enable caches */ - -/* For BFM and other purposes: */ -#define XSHAL_ALLVALID_CACHEATTR_WRITEBACK 0x11222222 /* enable caches without any invalid regions */ -#define XSHAL_ALLVALID_CACHEATTR_DEFAULT XSHAL_ALLVALID_CACHEATTR_WRITEBACK /* default setting for caches without any invalid regions */ - -#define XSHAL_ISS_PIPE_REGIONS 0 -#define XSHAL_ISS_SDRAM_REGIONS 0 - - -/*---------------------------------------------------------------------- - XT2000 BOARD SPECIFIC ... - ----------------------------------------------------------------------*/ - -#define XSHAL_XT2000_CACHEATTR_WRITEBACK 0x22FFFFFF /* enable caches in write-back mode */ -#define XSHAL_XT2000_CACHEATTR_WRITEALLOC 0x22FFFFFF /* enable caches in write-allocate mode */ -#define XSHAL_XT2000_CACHEATTR_WRITETHRU 0x22FFFFFF /* enable caches in write-through mode */ -#define XSHAL_XT2000_CACHEATTR_BYPASS 0x22FFFFFF /* disable caches in bypass mode */ -#define XSHAL_XT2000_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_WRITEBACK /* default setting to enable caches */ - -#define XSHAL_XT2000_PIPE_REGIONS 0x00001000 /* BusInt pipeline regions */ -#define XSHAL_XT2000_SDRAM_REGIONS 0x00000005 /* BusInt SDRAM regions */ - - -/*---------------------------------------------------------------------- - VECTOR SIZES - ----------------------------------------------------------------------*/ - -/* - * Sizes allocated to vectors by the system (memory map) configuration. - * These sizes are constrained by core configuration (eg. one vector's - * code cannot overflow into another vector) but are dependent on the - * system or board (or LSP) memory map configuration. - * - * Whether or not each vector happens to be in a system ROM is also - * a system configuration matter, sometimes useful, included here also: - */ -#define XSHAL_RESET_VECTOR_SIZE 0x000004E0 -#define XSHAL_RESET_VECTOR_ISROM 1 -#define XSHAL_USER_VECTOR_SIZE 0x0000001C -#define XSHAL_USER_VECTOR_ISROM 0 -#define XSHAL_PROGRAMEXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_USEREXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_KERNEL_VECTOR_SIZE 0x0000001C -#define XSHAL_KERNEL_VECTOR_ISROM 0 -#define XSHAL_STACKEDEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_KERNELEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_DOUBLEEXC_VECTOR_SIZE 0x000000E0 -#define XSHAL_DOUBLEEXC_VECTOR_ISROM 0 -#define XSHAL_WINDOW_VECTORS_SIZE 0x00000180 -#define XSHAL_WINDOW_VECTORS_ISROM 0 -#define XSHAL_INTLEVEL2_VECTOR_SIZE 0x0000000C -#define XSHAL_INTLEVEL2_VECTOR_ISROM 0 -#define XSHAL_INTLEVEL3_VECTOR_SIZE 0x0000000C -#define XSHAL_INTLEVEL3_VECTOR_ISROM 0 -#define XSHAL_INTLEVEL4_VECTOR_SIZE 0x0000000C -#define XSHAL_INTLEVEL4_VECTOR_ISROM 1 -#define XSHAL_DEBUG_VECTOR_SIZE XSHAL_INTLEVEL4_VECTOR_SIZE -#define XSHAL_DEBUG_VECTOR_ISROM XSHAL_INTLEVEL4_VECTOR_ISROM - - -#endif /*XTENSA_CONFIG_SYSTEM_H*/ - |
