diff options
Diffstat (limited to 'include/asm-x86/geode.h')
| -rw-r--r-- | include/asm-x86/geode.h | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h new file mode 100644 index 0000000..6da4bbb --- /dev/null +++ b/include/asm-x86/geode.h @@ -0,0 +1,159 @@ +/* + * AMD Geode definitions + * Copyright (C) 2006, Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#ifndef _ASM_GEODE_H_ +#define _ASM_GEODE_H_ + +#include <asm/processor.h> +#include <linux/io.h> + +/* Generic southbridge functions */ + +#define GEODE_DEV_PMS 0 +#define GEODE_DEV_ACPI 1 +#define GEODE_DEV_GPIO 2 +#define GEODE_DEV_MFGPT 3 + +extern int geode_get_dev_base(unsigned int dev); + +/* Useful macros */ +#define geode_pms_base() geode_get_dev_base(GEODE_DEV_PMS) +#define geode_acpi_base() geode_get_dev_base(GEODE_DEV_ACPI) +#define geode_gpio_base() geode_get_dev_base(GEODE_DEV_GPIO) +#define geode_mfgpt_base() geode_get_dev_base(GEODE_DEV_MFGPT) + +/* MSRS */ + +#define GX_GLCP_SYS_RSTPLL 0x4C000014 + +#define MSR_LBAR_SMB 0x5140000B +#define MSR_LBAR_GPIO 0x5140000C +#define MSR_LBAR_MFGPT 0x5140000D +#define MSR_LBAR_ACPI 0x5140000E +#define MSR_LBAR_PMS 0x5140000F + +#define MSR_PIC_YSEL_LOW 0x51400020 +#define MSR_PIC_YSEL_HIGH 0x51400021 +#define MSR_PIC_ZSEL_LOW 0x51400022 +#define MSR_PIC_ZSEL_HIGH 0x51400023 + +#define MFGPT_IRQ_MSR 0x51400028 +#define MFGPT_NR_MSR 0x51400029 + +/* Resource Sizes */ + +#define LBAR_GPIO_SIZE 0xFF +#define LBAR_MFGPT_SIZE 0x40 +#define LBAR_ACPI_SIZE 0x40 +#define LBAR_PMS_SIZE 0x80 + +/* ACPI registers (PMS block) */ + +/* + * PM1_EN is only valid when VSA is enabled for 16 bit reads. + * When VSA is not enabled, *always* read both PM1_STS and PM1_EN + * with a 32 bit read at offset 0x0 + */ + +#define PM1_STS 0x00 +#define PM1_EN 0x02 +#define PM1_CNT 0x08 +#define PM2_CNT 0x0C +#define PM_TMR 0x10 +#define PM_GPE0_STS 0x18 +#define PM_GPE0_EN 0x1C + +/* PMC registers (PMS block) */ + +#define PM_SSD 0x00 +#define PM_SCXA 0x04 +#define PM_SCYA 0x08 +#define PM_OUT_SLPCTL 0x0C +#define PM_SCLK 0x10 +#define PM_SED 0x1 +#define PM_SCXD 0x18 +#define PM_SCYD 0x1C +#define PM_IN_SLPCTL 0x20 +#define PM_WKD 0x30 +#define PM_WKXD 0x34 +#define PM_RD 0x38 +#define PM_WKXA 0x3C +#define PM_FSD 0x40 +#define PM_TSD 0x44 +#define PM_PSD 0x48 +#define PM_NWKD 0x4C +#define PM_AWKD 0x50 +#define PM_SSC 0x54 + +/* GPIO */ + +#define GPIO_OUTPUT_VAL 0x00 +#define GPIO_OUTPUT_ENABLE 0x04 +#define GPIO_OUTPUT_OPEN_DRAIN 0x08 +#define GPIO_OUTPUT_INVERT 0x0C +#define GPIO_OUTPUT_AUX1 0x10 +#define GPIO_OUTPUT_AUX2 0x14 +#define GPIO_PULL_UP 0x18 +#define GPIO_PULL_DOWN 0x1C +#define GPIO_INPUT_ENABLE 0x20 +#define GPIO_INPUT_INVERT 0x24 +#define GPIO_INPUT_FILTER 0x28 +#define GPIO_INPUT_EVENT_COUNT 0x2C +#define GPIO_READ_BACK 0x30 +#define GPIO_INPUT_AUX1 0x34 +#define GPIO_EVENTS_ENABLE 0x38 +#define GPIO_LOCK_ENABLE 0x3C +#define GPIO_POSITIVE_EDGE_EN 0x40 +#define GPIO_NEGATIVE_EDGE_EN 0x44 +#define GPIO_POSITIVE_EDGE_STS 0x48 +#define GPIO_NEGATIVE_EDGE_STS 0x4C + +#define GPIO_MAP_X 0xE0 +#define GPIO_MAP_Y 0xE4 +#define GPIO_MAP_Z 0xE8 +#define GPIO_MAP_W 0xEC + +extern void geode_gpio_set(unsigned int, unsigned int); +extern void geode_gpio_clear(unsigned int, unsigned int); +extern int geode_gpio_isset(unsigned int, unsigned int); +extern void geode_gpio_setup_event(unsigned int, int, int); +extern void geode_gpio_set_irq(unsigned int, unsigned int); + +static inline void geode_gpio_event_irq(unsigned int gpio, int pair) +{ + geode_gpio_setup_event(gpio, pair, 0); +} + +static inline void geode_gpio_event_pme(unsigned int gpio, int pair) +{ + geode_gpio_setup_event(gpio, pair, 1); +} + +/* Specific geode tests */ + +static inline int is_geode_gx(void) +{ + return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) && + (boot_cpu_data.x86 == 5) && + (boot_cpu_data.x86_model == 5)); +} + +static inline int is_geode_lx(void) +{ + return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && + (boot_cpu_data.x86 == 5) && + (boot_cpu_data.x86_model == 10)); +} + +static inline int is_geode(void) +{ + return (is_geode_gx() || is_geode_lx()); +} + +#endif |
