summaryrefslogtreecommitdiffstats
path: root/include/asm-v850/sim85e2.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-v850/sim85e2.h')
-rw-r--r--include/asm-v850/sim85e2.h75
1 files changed, 75 insertions, 0 deletions
diff --git a/include/asm-v850/sim85e2.h b/include/asm-v850/sim85e2.h
new file mode 100644
index 0000000..17dd4fa
--- /dev/null
+++ b/include/asm-v850/sim85e2.h
@@ -0,0 +1,75 @@
+/*
+ * include/asm-v850/sim85e2.h -- Machine-dependent defs for
+ * V850E2 RTL simulator
+ *
+ * Copyright (C) 2002,03 NEC Electronics Corporation
+ * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIM85E2_H__
+#define __V850_SIM85E2_H__
+
+
+#include <asm/v850e2.h> /* Based on V850E2 core. */
+
+
+/* Various memory areas supported by the simulator.
+ These should match the corresponding definitions in the linker script. */
+
+/* `instruction RAM'; instruction fetches are much faster from IRAM than
+ from DRAM. */
+#define IRAM_ADDR 0
+#define IRAM_SIZE 0x00100000 /* 1MB */
+/* `data RAM', below and contiguous with the I/O space.
+ Data fetches are much faster from DRAM than from IRAM. */
+#define DRAM_ADDR 0xfff00000
+#define DRAM_SIZE 0x000ff000 /* 1020KB */
+/* `external ram'. Unlike the above RAM areas, this memory is cached,
+ so both instruction and data fetches should be (mostly) fast --
+ however, currently only write-through caching is supported, so writes
+ to ERAM will be slow. */
+#define ERAM_ADDR 0x00100000
+#define ERAM_SIZE 0x07f00000 /* 127MB (max) */
+/* Dynamic RAM; uses memory controller. */
+#define SDRAM_ADDR 0x10000000
+#define SDRAM_SIZE 0x01000000 /* 16MB */
+
+
+/* Simulator specific control registers. */
+/* NOTHAL controls whether the simulator will stop at a `halt' insn. */
+#define SIM85E2_NOTHAL_ADDR 0xffffff22
+#define SIM85E2_NOTHAL (*(volatile u8 *)SIM85E2_NOTHAL_ADDR)
+/* The simulator will stop N cycles after N is written to SIMFIN. */
+#define SIM85E2_SIMFIN_ADDR 0xffffff24
+#define SIM85E2_SIMFIN (*(volatile u16 *)SIM85E2_SIMFIN_ADDR)
+
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS 64
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET SDRAM_ADDR
+
+
+/* For <asm/entry.h> */
+/* `R0 RAM', used for a few miscellaneous variables that must be accessible
+ using a load instruction relative to R0. The sim85e2 simulator
+ actually puts 1020K of RAM from FFF00000 to FFFFF000, so we arbitarily
+ choose a small portion at the end of that. */
+#define R0_RAM_ADDR 0xFFFFE000
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ 24 /* Minimum supported frequency. */
+#endif
+
+
+#endif /* __V850_SIM85E2_H__ */
OpenPOWER on IntegriCloud