summaryrefslogtreecommitdiffstats
path: root/include/asm-sparc64/floppy.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-sparc64/floppy.h')
-rw-r--r--include/asm-sparc64/floppy.h83
1 files changed, 1 insertions, 82 deletions
diff --git a/include/asm-sparc64/floppy.h b/include/asm-sparc64/floppy.h
index c47f58d..040d796 100644
--- a/include/asm-sparc64/floppy.h
+++ b/include/asm-sparc64/floppy.h
@@ -558,82 +558,6 @@ static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
}
#endif
-#ifdef CONFIG_PCI
-#undef ISA_FLOPPY_WORKS
-
-#ifdef ISA_FLOPPY_WORKS
-static unsigned long __init isa_floppy_init(void)
-{
- struct sparc_isa_bridge *isa_br;
- struct sparc_isa_device *isa_dev = NULL;
-
- for_each_isa(isa_br) {
- for_each_isadev(isa_dev, isa_br) {
- if (!strcmp(isa_dev->prom_node->name, "dma")) {
- struct sparc_isa_device *child =
- isa_dev->child;
-
- while (child) {
- if (!strcmp(child->prom_node->name,
- "floppy")) {
- isa_dev = child;
- goto isa_done;
- }
- child = child->next;
- }
- }
- }
- }
-isa_done:
- if (!isa_dev)
- return 0;
-
- /* We could use DMA on devices behind the ISA bridge, but...
- *
- * There is a slight problem. Normally on x86 kit the x86 processor
- * delays I/O port instructions when the ISA bus "dma in progress"
- * signal is active. Well, sparc64 systems do not monitor this
- * signal thus we would need to block all I/O port accesses in software
- * when a dma transfer is active for some device.
- */
-
- sun_fdc = (struct sun_flpy_controller *)isa_dev->resource.start;
- FLOPPY_IRQ = isa_dev->irq;
-
- sun_fdops.fd_inb = sun_pci_fd_inb;
- sun_fdops.fd_outb = sun_pci_fd_outb;
-
- can_use_virtual_dma = use_virtual_dma = 1;
- sun_fdops.fd_enable_dma = sun_fd_enable_dma;
- sun_fdops.fd_disable_dma = sun_fd_disable_dma;
- sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
- sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
- sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
- sun_fdops.get_dma_residue = sun_get_dma_residue;
-
- sun_fdops.fd_request_irq = sun_fd_request_irq;
- sun_fdops.fd_free_irq = sun_fd_free_irq;
-
- /* Floppy eject is manual. Actually, could determine this
- * via presence of 'manual' property in OBP node.
- */
- sun_fdops.fd_eject = sun_pci_fd_eject;
-
- fdc_status = (unsigned long) &sun_fdc->status_82077;
-
- allowed_drive_mask = 0;
- sun_floppy_types[0] = 0;
- sun_floppy_types[1] = 4;
-
- sun_pci_broken_drive = 1;
- sun_fdops.fd_outb = sun_pci_fd_broken_outb;
-
- return sun_floppy_types[0];
-}
-#endif /* ISA_FLOPPY_WORKS */
-
-#endif
-
static unsigned long __init sun_floppy_init(void)
{
char state[128];
@@ -667,13 +591,8 @@ static unsigned long __init sun_floppy_init(void)
}
}
ebus_done:
- if (!edev) {
-#ifdef ISA_FLOPPY_WORKS
- return isa_floppy_init();
-#else
+ if (!edev)
return 0;
-#endif
- }
state_prop = of_get_property(edev->prom_node, "status", NULL);
if (state_prop && !strncmp(state_prop, "disabled", 8))
OpenPOWER on IntegriCloud