diff options
Diffstat (limited to 'include/asm-sparc/system.h')
| -rw-r--r-- | include/asm-sparc/system.h | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/include/asm-sparc/system.h b/include/asm-sparc/system.h new file mode 100644 index 0000000..80cf20c --- /dev/null +++ b/include/asm-sparc/system.h @@ -0,0 +1,262 @@ +/* $Id: system.h,v 1.86 2001/10/30 04:57:10 davem Exp $ */ +#include <linux/config.h> + +#ifndef __SPARC_SYSTEM_H +#define __SPARC_SYSTEM_H + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/threads.h> /* NR_CPUS */ +#include <linux/thread_info.h> + +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/psr.h> +#include <asm/ptrace.h> +#include <asm/btfixup.h> + +#ifndef __ASSEMBLY__ + +/* + * Sparc (general) CPU types + */ +enum sparc_cpu { + sun4 = 0x00, + sun4c = 0x01, + sun4m = 0x02, + sun4d = 0x03, + sun4e = 0x04, + sun4u = 0x05, /* V8 ploos ploos */ + sun_unknown = 0x06, + ap1000 = 0x07, /* almost a sun4m */ +}; + +/* Really, userland should not be looking at any of this... */ +#ifdef __KERNEL__ + +extern enum sparc_cpu sparc_cpu_model; + +#ifndef CONFIG_SUN4 +#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c) +#define ARCH_SUN4 0 +#else +#define ARCH_SUN4C_SUN4 1 +#define ARCH_SUN4 1 +#endif + +#define SUN4M_NCPUS 4 /* Architectural limit of sun4m. */ + +extern struct thread_info *current_set[NR_CPUS]; + +extern unsigned long empty_bad_page; +extern unsigned long empty_bad_page_table; +extern unsigned long empty_zero_page; + +extern void sun_do_break(void); +extern int serial_console; +extern int stop_a_enabled; + +static __inline__ int con_is_present(void) +{ + return serial_console ? 0 : 1; +} + +/* When a context switch happens we must flush all user windows so that + * the windows of the current process are flushed onto its stack. This + * way the windows are all clean for the next process and the stack + * frames are up to date. + */ +extern void flush_user_windows(void); +extern void kill_user_windows(void); +extern void synchronize_user_stack(void); +extern void fpsave(unsigned long *fpregs, unsigned long *fsr, + void *fpqueue, unsigned long *fpqdepth); + +#ifdef CONFIG_SMP +#define SWITCH_ENTER(prv) \ + do { \ + if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \ + put_psr(get_psr() | PSR_EF); \ + fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \ + &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \ + clear_tsk_thread_flag(prv, TIF_USEDFPU); \ + (prv)->thread.kregs->psr &= ~PSR_EF; \ + } \ + } while(0) + +#define SWITCH_DO_LAZY_FPU(next) /* */ +#else +#define SWITCH_ENTER(prv) /* */ +#define SWITCH_DO_LAZY_FPU(nxt) \ + do { \ + if (last_task_used_math != (nxt)) \ + (nxt)->thread.kregs->psr&=~PSR_EF; \ + } while(0) +#endif + +/* + * Flush windows so that the VM switch which follows + * would not pull the stack from under us. + * + * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work) + * XXX WTF is the above comment? Found in late teen 2.4.x. + */ +#define prepare_arch_switch(rq, next) do { \ + __asm__ __volatile__( \ + ".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \ + "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \ + "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \ + "save %sp, -0x40, %sp\n\t" \ + "restore; restore; restore; restore; restore; restore; restore"); \ +} while(0) +#define finish_arch_switch(rq, next) spin_unlock_irq(&(rq)->lock) +#define task_running(rq, p) ((rq)->curr == (p)) + + /* Much care has gone into this code, do not touch it. + * + * We need to loadup regs l0/l1 for the newly forked child + * case because the trap return path relies on those registers + * holding certain values, gcc is told that they are clobbered. + * Gcc needs registers for 3 values in and 1 value out, so we + * clobber every non-fixed-usage register besides l2/l3/o4/o5. -DaveM + * + * Hey Dave, that do not touch sign is too much of an incentive + * - Anton & Pete + */ +#define switch_to(prev, next, last) do { \ + SWITCH_ENTER(prev); \ + SWITCH_DO_LAZY_FPU(next); \ + cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask); \ + __asm__ __volatile__( \ + "sethi %%hi(here - 0x8), %%o7\n\t" \ + "mov %%g6, %%g3\n\t" \ + "or %%o7, %%lo(here - 0x8), %%o7\n\t" \ + "rd %%psr, %%g4\n\t" \ + "std %%sp, [%%g6 + %4]\n\t" \ + "rd %%wim, %%g5\n\t" \ + "wr %%g4, 0x20, %%psr\n\t" \ + "nop\n\t" \ + "std %%g4, [%%g6 + %3]\n\t" \ + "ldd [%2 + %3], %%g4\n\t" \ + "mov %2, %%g6\n\t" \ + ".globl patchme_store_new_current\n" \ +"patchme_store_new_current:\n\t" \ + "st %2, [%1]\n\t" \ + "wr %%g4, 0x20, %%psr\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + "nop\n\t" /* LEON needs all 3 nops: load to %sp depends on CWP. */ \ + "ldd [%%g6 + %4], %%sp\n\t" \ + "wr %%g5, 0x0, %%wim\n\t" \ + "ldd [%%sp + 0x00], %%l0\n\t" \ + "ldd [%%sp + 0x38], %%i6\n\t" \ + "wr %%g4, 0x0, %%psr\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + "jmpl %%o7 + 0x8, %%g0\n\t" \ + " ld [%%g3 + %5], %0\n\t" \ + "here:\n" \ + : "=&r" (last) \ + : "r" (&(current_set[hard_smp_processor_id()])), \ + "r" ((next)->thread_info), \ + "i" (TI_KPSR), \ + "i" (TI_KSP), \ + "i" (TI_TASK) \ + : "g1", "g2", "g3", "g4", "g5", "g7", \ + "l0", "l1", "l3", "l4", "l5", "l6", "l7", \ + "i0", "i1", "i2", "i3", "i4", "i5", \ + "o0", "o1", "o2", "o3", "o7"); \ + } while(0) + +/* + * Changing the IRQ level on the Sparc. + */ +extern void local_irq_restore(unsigned long); +extern unsigned long __local_irq_save(void); +extern void local_irq_enable(void); + +static inline unsigned long getipl(void) +{ + unsigned long retval; + + __asm__ __volatile__("rd %%psr, %0" : "=r" (retval)); + return retval; +} + +#define local_save_flags(flags) ((flags) = getipl()) +#define local_irq_save(flags) ((flags) = __local_irq_save()) +#define local_irq_disable() ((void) __local_irq_save()) +#define irqs_disabled() ((getipl() & PSR_PIL) != 0) + +/* XXX Change this if we ever use a PSO mode kernel. */ +#define mb() __asm__ __volatile__ ("" : : : "memory") +#define rmb() mb() +#define wmb() mb() +#define read_barrier_depends() do { } while(0) +#define set_mb(__var, __value) do { __var = __value; mb(); } while(0) +#define set_wmb(__var, __value) set_mb(__var, __value) +#define smp_mb() __asm__ __volatile__("":::"memory") +#define smp_rmb() __asm__ __volatile__("":::"memory") +#define smp_wmb() __asm__ __volatile__("":::"memory") +#define smp_read_barrier_depends() do { } while(0) + +#define nop() __asm__ __volatile__ ("nop") + +/* This has special calling conventions */ +#ifndef CONFIG_SMP +BTFIXUPDEF_CALL(void, ___xchg32, void) +#endif + +extern __inline__ unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val) +{ +#ifdef CONFIG_SMP + __asm__ __volatile__("swap [%2], %0" + : "=&r" (val) + : "0" (val), "r" (m) + : "memory"); + return val; +#else + register unsigned long *ptr asm("g1"); + register unsigned long ret asm("g2"); + + ptr = (unsigned long *) m; + ret = val; + + /* Note: this is magic and the nop there is + really needed. */ + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___f____xchg32\n\t" + " nop\n\t" + : "=&r" (ret) + : "0" (ret), "r" (ptr) + : "g3", "g4", "g7", "memory", "cc"); + + return ret; +#endif +} + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) +#define tas(ptr) (xchg((ptr),1)) + +extern void __xchg_called_with_bad_pointer(void); + +static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size) +{ + switch (size) { + case 4: + return xchg_u32(ptr, x); + }; + __xchg_called_with_bad_pointer(); + return x; +} + +extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn)); + +#endif /* __KERNEL__ */ + +#endif /* __ASSEMBLY__ */ + +#define arch_align_stack(x) (x) + +#endif /* !(__SPARC_SYSTEM_H) */ |
