diff options
Diffstat (limited to 'include/asm-powerpc/mpic.h')
| -rw-r--r-- | include/asm-powerpc/mpic.h | 287 |
1 files changed, 287 insertions, 0 deletions
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h new file mode 100644 index 0000000..7083d1f --- /dev/null +++ b/include/asm-powerpc/mpic.h @@ -0,0 +1,287 @@ +#ifndef _ASM_POWERPC_MPIC_H +#define _ASM_POWERPC_MPIC_H + +#include <linux/irq.h> + +/* + * Global registers + */ + +#define MPIC_GREG_BASE 0x01000 + +#define MPIC_GREG_FEATURE_0 0x00000 +#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 +#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 +#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 +#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 +#define MPIC_GREG_FEATURE_VERSION_MASK 0xff +#define MPIC_GREG_FEATURE_1 0x00010 +#define MPIC_GREG_GLOBAL_CONF_0 0x00020 +#define MPIC_GREG_GCONF_RESET 0x80000000 +#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 +#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff +#define MPIC_GREG_GLOBAL_CONF_1 0x00030 +#define MPIC_GREG_VENDOR_0 0x00040 +#define MPIC_GREG_VENDOR_1 0x00050 +#define MPIC_GREG_VENDOR_2 0x00060 +#define MPIC_GREG_VENDOR_3 0x00070 +#define MPIC_GREG_VENDOR_ID 0x00080 +#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 +#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 +#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 +#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 +#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff +#define MPIC_GREG_PROCESSOR_INIT 0x00090 +#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 +#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 +#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 +#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 +#define MPIC_GREG_SPURIOUS 0x000e0 +#define MPIC_GREG_TIMER_FREQ 0x000f0 + +/* + * + * Timer registers + */ +#define MPIC_TIMER_BASE 0x01100 +#define MPIC_TIMER_STRIDE 0x40 + +#define MPIC_TIMER_CURRENT_CNT 0x00000 +#define MPIC_TIMER_BASE_CNT 0x00010 +#define MPIC_TIMER_VECTOR_PRI 0x00020 +#define MPIC_TIMER_DESTINATION 0x00030 + +/* + * Per-Processor registers + */ + +#define MPIC_CPU_THISBASE 0x00000 +#define MPIC_CPU_BASE 0x20000 +#define MPIC_CPU_STRIDE 0x01000 + +#define MPIC_CPU_IPI_DISPATCH_0 0x00040 +#define MPIC_CPU_IPI_DISPATCH_1 0x00050 +#define MPIC_CPU_IPI_DISPATCH_2 0x00060 +#define MPIC_CPU_IPI_DISPATCH_3 0x00070 +#define MPIC_CPU_CURRENT_TASK_PRI 0x00080 +#define MPIC_CPU_TASKPRI_MASK 0x0000000f +#define MPIC_CPU_WHOAMI 0x00090 +#define MPIC_CPU_WHOAMI_MASK 0x0000001f +#define MPIC_CPU_INTACK 0x000a0 +#define MPIC_CPU_EOI 0x000b0 + +/* + * Per-source registers + */ + +#define MPIC_IRQ_BASE 0x10000 +#define MPIC_IRQ_STRIDE 0x00020 +#define MPIC_IRQ_VECTOR_PRI 0x00000 +#define MPIC_VECPRI_MASK 0x80000000 +#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ +#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 +#define MPIC_VECPRI_PRIORITY_SHIFT 16 +#define MPIC_VECPRI_VECTOR_MASK 0x000007ff +#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 +#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 +#define MPIC_VECPRI_POLARITY_MASK 0x00800000 +#define MPIC_VECPRI_SENSE_LEVEL 0x00400000 +#define MPIC_VECPRI_SENSE_EDGE 0x00000000 +#define MPIC_VECPRI_SENSE_MASK 0x00400000 +#define MPIC_IRQ_DESTINATION 0x00010 + +#define MPIC_MAX_IRQ_SOURCES 2048 +#define MPIC_MAX_CPUS 32 +#define MPIC_MAX_ISU 32 + +/* + * Special vector numbers (internal use only) + */ +#define MPIC_VEC_SPURRIOUS 255 +#define MPIC_VEC_IPI_3 254 +#define MPIC_VEC_IPI_2 253 +#define MPIC_VEC_IPI_1 252 +#define MPIC_VEC_IPI_0 251 + +/* unused */ +#define MPIC_VEC_TIMER_3 250 +#define MPIC_VEC_TIMER_2 249 +#define MPIC_VEC_TIMER_1 248 +#define MPIC_VEC_TIMER_0 247 + +/* Type definition of the cascade handler */ +typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data); + +#ifdef CONFIG_MPIC_BROKEN_U3 +/* Fixup table entry */ +struct mpic_irq_fixup +{ + u8 __iomem *base; + unsigned int irq; +}; +#endif /* CONFIG_MPIC_BROKEN_U3 */ + + +/* The instance data of a given MPIC */ +struct mpic +{ + /* The "linux" controller struct */ + hw_irq_controller hc_irq; +#ifdef CONFIG_SMP + hw_irq_controller hc_ipi; +#endif + const char *name; + /* Flags */ + unsigned int flags; + /* How many irq sources in a given ISU */ + unsigned int isu_size; + unsigned int isu_shift; + unsigned int isu_mask; + /* Offset of irq vector numbers */ + unsigned int irq_offset; + unsigned int irq_count; + /* Offset of ipi vector numbers */ + unsigned int ipi_offset; + /* Number of sources */ + unsigned int num_sources; + /* Number of CPUs */ + unsigned int num_cpus; + /* cascade handler */ + mpic_cascade_t cascade; + void *cascade_data; + unsigned int cascade_vec; + /* senses array */ + unsigned char *senses; + unsigned int senses_count; + +#ifdef CONFIG_MPIC_BROKEN_U3 + /* The fixup table */ + struct mpic_irq_fixup *fixups; + spinlock_t fixup_lock; +#endif + + /* The various ioremap'ed bases */ + volatile u32 __iomem *gregs; + volatile u32 __iomem *tmregs; + volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS]; + volatile u32 __iomem *isus[MPIC_MAX_ISU]; + + /* link */ + struct mpic *next; +}; + +/* This is the primary controller, only that one has IPIs and + * has afinity control. A non-primary MPIC always uses CPU0 + * registers only + */ +#define MPIC_PRIMARY 0x00000001 +/* Set this for a big-endian MPIC */ +#define MPIC_BIG_ENDIAN 0x00000002 +/* Broken U3 MPIC */ +#define MPIC_BROKEN_U3 0x00000004 +/* Broken IPI registers (autodetected) */ +#define MPIC_BROKEN_IPI 0x00000008 +/* MPIC wants a reset */ +#define MPIC_WANTS_RESET 0x00000010 + +/* Allocate the controller structure and setup the linux irq descs + * for the range if interrupts passed in. No HW initialization is + * actually performed. + * + * @phys_addr: physial base address of the MPIC + * @flags: flags, see constants above + * @isu_size: number of interrupts in an ISU. Use 0 to use a + * standard ISU-less setup (aka powermac) + * @irq_offset: first irq number to assign to this mpic + * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 + * to match the number of sources + * @ipi_offset: first irq number to assign to this mpic IPI sources, + * used only on primary mpic + * @senses: array of sense values + * @senses_num: number of entries in the array + * + * Note about the sense array. If none is passed, all interrupts are + * setup to be level negative unless MPIC_BROKEN_U3 is set in which + * case they are edge positive (and the array is ignored anyway). + * The values in the array start at the first source of the MPIC, + * that is senses[0] correspond to linux irq "irq_offset". + */ +extern struct mpic *mpic_alloc(unsigned long phys_addr, + unsigned int flags, + unsigned int isu_size, + unsigned int irq_offset, + unsigned int irq_count, + unsigned int ipi_offset, + unsigned char *senses, + unsigned int senses_num, + const char *name); + +/* Assign ISUs, to call before mpic_init() + * + * @mpic: controller structure as returned by mpic_alloc() + * @isu_num: ISU number + * @phys_addr: physical address of the ISU + */ +extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, + unsigned long phys_addr); + +/* Initialize the controller. After this has been called, none of the above + * should be called again for this mpic + */ +extern void mpic_init(struct mpic *mpic); + +/* Setup a cascade. Currently, only one cascade is supported this + * way, though you can always do a normal request_irq() and add + * other cascades this way. You should call this _after_ having + * added all the ISUs + * + * @irq_no: "linux" irq number of the cascade (that is offset'ed vector) + * @handler: cascade handler function + */ +extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder, + void *data); + +/* + * All of the following functions must only be used after the + * ISUs have been assigned and the controller fully initialized + * with mpic_init() + */ + + +/* Change/Read the priority of an interrupt. Default is 8 for irqs and + * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the + * IPI number is then the offset'ed (linux irq number mapped to the IPI) + */ +extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); +extern unsigned int mpic_irq_get_priority(unsigned int irq); + +/* Setup a non-boot CPU */ +extern void mpic_setup_this_cpu(void); + +/* Clean up for kexec (or cpu offline or ...) */ +extern void mpic_teardown_this_cpu(int secondary); + +/* Get the current cpu priority for this cpu (0..15) */ +extern int mpic_cpu_get_priority(void); + +/* Set the current cpu priority for this cpu */ +extern void mpic_cpu_set_priority(int prio); + +/* Request IPIs on primary mpic */ +extern void mpic_request_ipis(void); + +/* Send an IPI (non offseted number 0..3) */ +extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); + +/* Send a message (IPI) to a given target (cpu number or MSG_*) */ +void smp_mpic_message_pass(int target, int msg); + +/* Fetch interrupt from a given mpic */ +extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs); +/* This one gets to the primary mpic */ +extern int mpic_get_irq(struct pt_regs *regs); + +/* global mpic for pSeries */ +extern struct mpic *pSeries_mpic; + +#endif /* _ASM_POWERPC_MPIC_H */ |
