diff options
Diffstat (limited to 'include/asm-parisc/superio.h')
| -rw-r--r-- | include/asm-parisc/superio.h | 85 |
1 files changed, 0 insertions, 85 deletions
diff --git a/include/asm-parisc/superio.h b/include/asm-parisc/superio.h deleted file mode 100644 index 6598acb..0000000 --- a/include/asm-parisc/superio.h +++ /dev/null @@ -1,85 +0,0 @@ -#ifndef _PARISC_SUPERIO_H -#define _PARISC_SUPERIO_H - -#define IC_PIC1 0x20 /* PCI I/O address of master 8259 */ -#define IC_PIC2 0xA0 /* PCI I/O address of slave */ - -/* Config Space Offsets to configuration and base address registers */ -#define SIO_CR 0x5A /* Configuration Register */ -#define SIO_ACPIBAR 0x88 /* ACPI BAR */ -#define SIO_FDCBAR 0x90 /* Floppy Disk Controller BAR */ -#define SIO_SP1BAR 0x94 /* Serial 1 BAR */ -#define SIO_SP2BAR 0x98 /* Serial 2 BAR */ -#define SIO_PPBAR 0x9C /* Parallel BAR */ - -#define TRIGGER_1 0x67 /* Edge/level trigger register 1 */ -#define TRIGGER_2 0x68 /* Edge/level trigger register 2 */ - -/* Interrupt Routing Control registers */ -#define CFG_IR_SER 0x69 /* Serial 1 [0:3] and Serial 2 [4:7] */ -#define CFG_IR_PFD 0x6a /* Parallel [0:3] and Floppy [4:7] */ -#define CFG_IR_IDE 0x6b /* IDE1 [0:3] and IDE2 [4:7] */ -#define CFG_IR_INTAB 0x6c /* PCI INTA [0:3] and INT B [4:7] */ -#define CFG_IR_INTCD 0x6d /* PCI INTC [0:3] and INT D [4:7] */ -#define CFG_IR_PS2 0x6e /* PS/2 KBINT [0:3] and Mouse [4:7] */ -#define CFG_IR_FXBUS 0x6f /* FXIRQ[0] [0:3] and FXIRQ[1] [4:7] */ -#define CFG_IR_USB 0x70 /* FXIRQ[2] [0:3] and USB [4:7] */ -#define CFG_IR_ACPI 0x71 /* ACPI SCI [0:3] and reserved [4:7] */ - -#define CFG_IR_LOW CFG_IR_SER /* Lowest interrupt routing reg */ -#define CFG_IR_HIGH CFG_IR_ACPI /* Highest interrupt routing reg */ - -/* 8259 operational control words */ -#define OCW2_EOI 0x20 /* Non-specific EOI */ -#define OCW2_SEOI 0x60 /* Specific EOI */ -#define OCW3_IIR 0x0A /* Read request register */ -#define OCW3_ISR 0x0B /* Read service register */ -#define OCW3_POLL 0x0C /* Poll the PIC for an interrupt vector */ - -/* Interrupt lines. Only PIC1 is used */ -#define USB_IRQ 1 /* USB */ -#define SP1_IRQ 3 /* Serial port 1 */ -#define SP2_IRQ 4 /* Serial port 2 */ -#define PAR_IRQ 5 /* Parallel port */ -#define FDC_IRQ 6 /* Floppy controller */ -#define IDE_IRQ 7 /* IDE (pri+sec) */ - -/* ACPI registers */ -#define USB_REG_CR 0x1f /* USB Regulator Control Register */ - -#define SUPERIO_NIRQS 8 - -struct superio_device { - u32 fdc_base; - u32 sp1_base; - u32 sp2_base; - u32 pp_base; - u32 acpi_base; - int suckyio_irq_enabled; - struct pci_dev *lio_pdev; /* pci device for legacy IO (fn 1) */ - struct pci_dev *usb_pdev; /* pci device for USB (fn 2) */ -}; - -/* - * Does NS make a 87415 based plug in PCI card? If so, because of this - * macro we currently don't support it being plugged into a machine - * that contains a SuperIO chip AND has CONFIG_SUPERIO enabled. - * - * This could be fixed by checking to see if function 1 exists, and - * if it is SuperIO Legacy IO; but really now, is this combination - * going to EVER happen? - */ - -#define SUPERIO_IDE_FN 0 /* Function number of IDE controller */ -#define SUPERIO_LIO_FN 1 /* Function number of Legacy IO controller */ -#define SUPERIO_USB_FN 2 /* Function number of USB controller */ - -#define is_superio_device(x) \ - (((x)->vendor == PCI_VENDOR_ID_NS) && \ - ( ((x)->device == PCI_DEVICE_ID_NS_87415) \ - || ((x)->device == PCI_DEVICE_ID_NS_87560_LIO) \ - || ((x)->device == PCI_DEVICE_ID_NS_87560_USB) ) ) - -extern int superio_fixup_irq(struct pci_dev *pcidev); /* called by iosapic */ - -#endif /* _PARISC_SUPERIO_H */ |
