diff options
Diffstat (limited to 'include/asm-mips/sn/klconfig.h')
| -rw-r--r-- | include/asm-mips/sn/klconfig.h | 980 |
1 files changed, 980 insertions, 0 deletions
diff --git a/include/asm-mips/sn/klconfig.h b/include/asm-mips/sn/klconfig.h new file mode 100644 index 0000000..d028e28 --- /dev/null +++ b/include/asm-mips/sn/klconfig.h @@ -0,0 +1,980 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/klconfig.h>. + * + * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 1999, 2000 by Ralf Baechle + */ +#ifndef _ASM_SN_KLCONFIG_H +#define _ASM_SN_KLCONFIG_H + +/* + * The KLCONFIG structures store info about the various BOARDs found + * during Hardware Discovery. In addition, it stores info about the + * components found on the BOARDs. + */ + +/* + * WARNING: + * Certain assembly language routines (notably xxxxx.s) in the IP27PROM + * will depend on the format of the data structures in this file. In + * most cases, rearranging the fields can seriously break things. + * Adding fields in the beginning or middle can also break things. + * Add fields if necessary, to the end of a struct in such a way + * that offsets of existing fields do not change. + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <asm/sn/types.h> + +#if defined(CONFIG_SGI_IP27) + +#include <asm/sn/sn0/addrs.h> +//#include <sys/SN/router.h> +// XXX Stolen from <sys/SN/router.h>: +#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ +#include <asm/sn/sn0/sn0_fru.h> +//#include <sys/graph.h> +//#include <sys/xtalk/xbow.h> + +#elif defined(CONFIG_SGI_IP35) + +#include <asm/sn/sn1/addrs.h> +#include <sys/sn/router.h> +#include <sys/graph.h> +#include <asm/xtalk/xbow.h> + +#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */ + +#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35) +#include <asm/sn/agent.h> +#include <asm/arc/types.h> +#include <asm/arc/hinv.h> +#if defined(CONFIG_SGI_IO) || defined(CONFIG_SGI_IP35) +// The hack file has to be before vector and after sn0_fru.... +#include <asm/hack.h> +#include <asm/sn/vector.h> +#include <asm/xtalk/xtalk.h> +#endif /* CONFIG_SGI_IO || CONFIG_SGI_IP35 */ +#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */ + +#define KLCFGINFO_MAGIC 0xbeedbabe + +#ifdef FRUTEST +typedef u64 klconf_off_t; +#else +typedef s32 klconf_off_t; +#endif + +/* + * Some IMPORTANT OFFSETS. These are the offsets on all NODES. + */ +#if 0 +#define RAMBASE 0 +#define ARCSSPB_OFF 0x1000 /* shift it to sys/arcs/spb.h */ + +#define OFF_HWGRAPH 0 +#endif + +#define MAX_MODULE_ID 255 +#define SIZE_PAD 4096 /* 4k padding for structures */ +/* + * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets, + * 2 Midplanes assuming no pci card cages + */ +#define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2) + +/* XXX if each node is guranteed to have some memory */ + +#define MAX_PCI_DEVS 8 + +/* lboard_t->brd_flags fields */ +/* All bits in this field are currently used. Try the pad fields if + you need more flag bits */ + +#define ENABLE_BOARD 0x01 +#define FAILED_BOARD 0x02 +#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which + are discovered twice. Use one of them */ +#define VISITED_BOARD 0x08 /* Used for compact hub numbering. */ +#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ +#define GLOBAL_MASTER_IO6 0x20 +#define THIRD_NIC_PRESENT 0x40 /* for future use */ +#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ + +/* klinfo->flags fields */ + +#define KLINFO_ENABLE 0x01 /* This component is enabled */ +#define KLINFO_FAILED 0x02 /* This component failed */ +#define KLINFO_DEVICE 0x04 /* This component is a device */ +#define KLINFO_VISITED 0x08 /* This component has been visited */ +#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ +#define KLINFO_INSTALL 0x20 /* Install a driver */ +#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ +#define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL) + +#define GB2 0x80000000 + +#define MAX_RSV_PTRS 32 + +/* Structures to manage various data storage areas */ +/* The numbers must be contiguous since the array index i + is used in the code to allocate various areas. +*/ + +#define BOARD_STRUCT 0 +#define COMPONENT_STRUCT 1 +#define ERRINFO_STRUCT 2 +#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) +#define DEVICE_STRUCT 3 + + +typedef struct console_s { +#if defined(CONFIG_SGI_IO) /* FIXME */ + __psunsigned_t uart_base; + __psunsigned_t config_base; + __psunsigned_t memory_base; +#else + unsigned long uart_base; + unsigned long config_base; + unsigned long memory_base; +#endif + short baud; + short flag; + int type; + nasid_t nasid; + char wid; + char npci; + nic_t baseio_nic; +} console_t; + +typedef struct klc_malloc_hdr { + klconf_off_t km_base; + klconf_off_t km_limit; + klconf_off_t km_current; +} klc_malloc_hdr_t; + +/* Functions/macros needed to use this structure */ + +typedef struct kl_config_hdr { + u64 ch_magic; /* set this to KLCFGINFO_MAGIC */ + u32 ch_version; /* structure version number */ + klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */ + klconf_off_t ch_cons_off; /* offset of ch_cons */ + klconf_off_t ch_board_info; /* the link list of boards */ + console_t ch_cons_info; /* address info of the console */ + klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX]; + confidence_t ch_sw_belief; /* confidence that software is bad*/ + confidence_t ch_sn0net_belief; /* confidence that sn0net is bad */ +} kl_config_hdr_t; + + +#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) +#if 0 +#define KL_CONFIG_MALLOC_HDR(_nasid) \ + (KL_CONFIG_HDR(_nasid)->ch_malloc_hdr) +#endif +#define KL_CONFIG_INFO_OFFSET(_nasid) \ + (KL_CONFIG_HDR(_nasid)->ch_board_info) +#define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \ + (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) + +#define KL_CONFIG_INFO(_nasid) \ + (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ + NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \ + 0) +#define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic) + +#define KL_CONFIG_CHECK_MAGIC(_nasid) \ + (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) + +#define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \ + (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) + +/* --- New Macros for the changed kl_config_hdr_t structure --- */ + +#if defined(CONFIG_SGI_IO) +#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ + ((__psunsigned_t)_k + (_k->ch_malloc_hdr_off))) +#else +#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ + (unsigned long)_k + (_k->ch_malloc_hdr_off))) +#endif + +#define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) + +#if defined(CONFIG_SGI_IO) +#define PTR_CH_CONS_INFO(_k) ((console_t *)\ + ((__psunsigned_t)_k + (_k->ch_cons_off))) +#else +#define PTR_CH_CONS_INFO(_k) ((console_t *)\ + ((unsigned long)_k + (_k->ch_cons_off))) +#endif + +#define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n)) + +/* ------------------------------------------------------------- */ + +#define KL_CONFIG_INFO_START(_nasid) \ + (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) + +#define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid) +#define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off)) + +#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) + +#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) +#define XBOW_PORT_TYPE_IO(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) + +#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) +#define XBOW_PORT_NASID(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) + +#define XBOW_PORT_IO 0x1 +#define XBOW_PORT_HUB 0x2 +#define XBOW_PORT_ENABLE 0x4 + +#define SN0_PORT_FENCE_SHFT 0 +#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) + +/* + * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD + * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to + * the LOCAL/current NODE. REMOTE means it is attached to a different + * node.(TBD - Need a way to treat ROUTER boards.) + * + * There are 2 different structures to represent these boards - + * lboard - Local board, rboard - remote board. These 2 structures + * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer + * Figure below). The first byte of the rboard or lboard structure + * is used to find out its type - no unions are used. + * If it is a lboard, then the config info of this board will be found + * on the local node. (LOCAL NODE BASE + offset value gives pointer to + * the structure. + * If it is a rboard, the local structure contains the node number + * and the offset of the beginning of the LINKED LIST on the remote node. + * The details of the hardware on a remote node can be built locally, + * if required, by reading the LINKED LIST on the remote node and + * ignoring all the rboards on that node. + * + * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the + * First board info on the remote node. The remote node list is + * traversed as the local list, using the REMOTE BASE ADDRESS and not + * the local base address and ignoring all rboard values. + * + * + KLCONFIG + + +------------+ +------------+ +------------+ +------------+ + | lboard | +-->| lboard | +-->| rboard | +-->| lboard | + +------------+ | +------------+ | +------------+ | +------------+ + | board info | | | board info | | |errinfo,bptr| | | board info | + +------------+ | +------------+ | +------------+ | +------------+ + | offset |--+ | offset |--+ | offset |--+ |offset=NULL | + +------------+ +------------+ +------------+ +------------+ + + + +------------+ + | board info | + +------------+ +--------------------------------+ + | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) + +------------+ +--------------------------------+ + | compt 2 |--+ + +------------+ | +--------------------------------+ + | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) + +------------+ +--------------------------------+ + | errinfo |--+ + +------------+ | +--------------------------------+ + +--->|r/l brd errinfo,compt err flags | + +--------------------------------+ + + * + * Each BOARD consists of COMPONENTs and the BOARD structure has + * pointers (offsets) to its COMPONENT structure. + * The COMPONENT structure has version info, size and speed info, revision, + * error info and the NIC info. This structure can accommodate any + * BOARD with arbitrary COMPONENT composition. + * + * The ERRORINFO part of each BOARD has error information + * that describes errors about the BOARD itself. It also has flags to + * indicate the COMPONENT(s) on the board that have errors. The error + * information specific to the COMPONENT is present in the respective + * COMPONENT structure. + * + * The ERRORINFO structure is also treated like a COMPONENT, ie. the + * BOARD has pointers(offset) to the ERRORINFO structure. The rboard + * structure also has a pointer to the ERRORINFO structure. This is + * the place to store ERRORINFO about a REMOTE NODE, if the HUB on + * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where + * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can + * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info + * which is present on the REMOTE NODE.(TBD) + * REMOTE ERRINFO can be stored on any of the nearest nodes + * or on all the nearest nodes.(TBD) + * Like BOARD structures, REMOTE ERRINFO structures can be built locally + * using the rboard errinfo pointer. + * + * In order to get useful information from this Data organization, a set of + * interface routines are provided (TBD). The important thing to remember while + * manipulating the structures, is that, the NODE number information should + * be used. If the NODE is non-zero (remote) then each offset should + * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. + * This includes offsets for BOARDS, COMPONENTS and ERRORINFO. + * + * Note that these structures do not provide much info about connectivity. + * That info will be part of HWGRAPH, which is an extension of the cfg_t + * data structure. (ref IP27prom/cfg.h) It has to be extended to include + * the IO part of the Network(TBD). + * + * The data structures below define the above concepts. + */ + +/* + * Values for CPU types + */ +#define KL_CPU_R4000 0x1 /* Standard R4000 */ +#define KL_CPU_TFP 0x2 /* TFP processor */ +#define KL_CPU_R10000 0x3 /* R10000 (T5) */ +#define KL_CPU_NONE (-1) /* no cpu present in slot */ + +/* + * IP27 BOARD classes + */ + +#define KLCLASS_MASK 0xf0 +#define KLCLASS_NONE 0x00 +#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ +#define KLCLASS_CPU KLCLASS_NODE +#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI + and the non-graphics widget boards */ +#define KLCLASS_ROUTER 0x30 /* Router board */ +#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board + so that we can record error info */ +#define KLCLASS_GFX 0x50 /* graphics boards */ + +#define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx + * hw ifc to xtalk and are not gfx + * class for sw purposes */ + +#define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */ +#define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */ + +#define KLCLASS_UNKNOWN 0xf0 + +#define KLCLASS(_x) ((_x) & KLCLASS_MASK) + +/* + * IP27 board types + */ + +#define KLTYPE_MASK 0x0f +#define KLTYPE_NONE 0x00 +#define KLTYPE_EMPTY 0x00 + +#define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0) +#define KLTYPE_IP27 (KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */ + +#define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0) +#define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */ +#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ +#define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2) +#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ +#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) +#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ +#define KLTYPE_FDDI (KLCLASS_IO | 0x4) +#define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */ +#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ +#define KLTYPE_PCI KLTYPE_HAROLD +#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ +#define KLTYPE_MIO (KLCLASS_IO | 0x8) +#define KLTYPE_FC (KLCLASS_IO | 0x9) +#define KLTYPE_LINC (KLCLASS_IO | 0xA) +#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ +#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ +#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ + +#define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */ +#define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */ +#define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */ + +#define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0) +#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) +#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ +#define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2) +#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) + +#define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0) +#define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */ +#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 +#define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) + +#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) +#define KLTYPE_IBRICK (KLCLASS_IOBRICK | 0x1) +#define KLTYPE_PBRICK (KLCLASS_IOBRICK | 0x2) +#define KLTYPE_XBRICK (KLCLASS_IOBRICK | 0x3) + +#define KLTYPE_PBRICK_BRIDGE KLTYPE_PBRICK + +/* The value of type should be more than 8 so that hinv prints + * out the board name from the NIC string. For values less than + * 8 the name of the board needs to be hard coded in a few places. + * When bringup started nic names had not standardized and so we + * had to hard code. (For people interested in history.) + */ +#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) + +#define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf) + +#define KLTYPE(_x) ((_x) & KLTYPE_MASK) +#define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \ + (l->brd_flags & SECOND_NIC_PRESENT)) +#define IS_MIO_IOC3(l,n) (IS_MIO_PRESENT(l) && (n > 2)) + +/* + * board structures + */ + +#define MAX_COMPTS_PER_BRD 24 + +#define LOCAL_BOARD 1 +#define REMOTE_BOARD 2 + +#define LBOARD_STRUCT_VERSION 2 + +typedef struct lboard_s { + klconf_off_t brd_next; /* Next BOARD */ + unsigned char struct_type; /* type of structure, local or remote */ + unsigned char brd_type; /* type+class */ + unsigned char brd_sversion; /* version of this structure */ + unsigned char brd_brevision; /* board revision */ + unsigned char brd_promver; /* board prom version, if any */ + unsigned char brd_flags; /* Enabled, Disabled etc */ + unsigned char brd_slot; /* slot number */ + unsigned short brd_debugsw; /* Debug switches */ + moduleid_t brd_module; /* module to which it belongs */ + partid_t brd_partition; /* Partition number */ + unsigned short brd_diagval; /* diagnostic value */ + unsigned short brd_diagparm; /* diagnostic parameter */ + unsigned char brd_inventory; /* inventory history */ + unsigned char brd_numcompts; /* Number of components */ + nic_t brd_nic; /* Number in CAN */ + nasid_t brd_nasid; /* passed parameter */ + klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ + klconf_off_t brd_errinfo; /* Board's error information */ + struct lboard_s *brd_parent; /* Logical parent for this brd */ + vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */ + confidence_t brd_confidence; /* confidence that the board is bad */ + nasid_t brd_owner; /* who owns this board */ + unsigned char brd_nic_flags; /* To handle 8 more NICs */ + char brd_name[32]; +} lboard_t; + + +/* + * Make sure we pass back the calias space address for local boards. + * klconfig board traversal and error structure extraction defines. + */ + +#define BOARD_SLOT(_brd) ((_brd)->brd_slot) + +#define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type) +#define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type) +#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) +#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) +#define KLCF_MODULE_ID(_brd) ((_brd)->brd_module) + +#ifdef FRUTEST + +#define KLCF_NEXT(_brd) ((_brd)->brd_next ? (lboard_t *)((_brd)->brd_next): NULL) +#define KLCF_COMP(_brd, _ndx) (klinfo_t *)((_brd)->brd_compts[(_ndx)]) +#define KLCF_COMP_ERROR(_brd, _comp) (_brd = _brd , (_comp)->errinfo) + +#else + +#define KLCF_NEXT(_brd) \ + ((_brd)->brd_next ? \ + (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\ + NULL) +#define KLCF_COMP(_brd, _ndx) \ + (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \ + (_brd)->brd_compts[(_ndx)])) + +#define KLCF_COMP_ERROR(_brd, _comp) \ + (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) + +#endif + +#define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type) +#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ + + + +/* + * Generic info structure. This stores common info about a + * component. + */ + +typedef struct klinfo_s { /* Generic info */ + unsigned char struct_type; /* type of this structure */ + unsigned char struct_version; /* version of this structure */ + unsigned char flags; /* Enabled, disabled etc */ + unsigned char revision; /* component revision */ + unsigned short diagval; /* result of diagnostics */ + unsigned short diagparm; /* diagnostic parameter */ + unsigned char inventory; /* previous inventory status */ + nic_t nic; /* MUst be aligned properly */ + unsigned char physid; /* physical id of component */ + unsigned int virtid; /* virtual id as seen by system */ + unsigned char widid; /* Widget id - if applicable */ + nasid_t nasid; /* node number - from parent */ + char pad1; /* pad out structure. */ + char pad2; /* pad out structure. */ + COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ + klconf_off_t errinfo; /* component specific errors */ + unsigned short pad3; /* pci fields have moved over to */ + unsigned short pad4; /* klbri_t */ +} klinfo_t ; + +#define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE) +/* + * Component structures. + * Following are the currently identified components: + * CPU, HUB, MEM_BANK, + * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) + * BRIDGE, IOC3, SuperIO, SCSI, FDDI + * ROUTER + * GRAPHICS + */ +#define KLSTRUCT_UNKNOWN 0 +#define KLSTRUCT_CPU 1 +#define KLSTRUCT_HUB 2 +#define KLSTRUCT_MEMBNK 3 +#define KLSTRUCT_XBOW 4 +#define KLSTRUCT_BRI 5 +#define KLSTRUCT_IOC3 6 +#define KLSTRUCT_PCI 7 +#define KLSTRUCT_VME 8 +#define KLSTRUCT_ROU 9 +#define KLSTRUCT_GFX 10 +#define KLSTRUCT_SCSI 11 +#define KLSTRUCT_FDDI 12 +#define KLSTRUCT_MIO 13 +#define KLSTRUCT_DISK 14 +#define KLSTRUCT_TAPE 15 +#define KLSTRUCT_CDROM 16 +#define KLSTRUCT_HUB_UART 17 +#define KLSTRUCT_IOC3ENET 18 +#define KLSTRUCT_IOC3UART 19 +#define KLSTRUCT_UNUSED 20 /* XXX UNUSED */ +#define KLSTRUCT_IOC3PCKM 21 +#define KLSTRUCT_RAD 22 +#define KLSTRUCT_HUB_TTY 23 +#define KLSTRUCT_IOC3_TTY 24 + +/* Early Access IO proms are compatible + only with KLSTRUCT values upto 24. */ + +#define KLSTRUCT_FIBERCHANNEL 25 +#define KLSTRUCT_MOD_SERIAL_NUM 26 +#define KLSTRUCT_IOC3MS 27 +#define KLSTRUCT_TPU 28 +#define KLSTRUCT_GSN_A 29 +#define KLSTRUCT_GSN_B 30 +#define KLSTRUCT_XTHD 31 + +/* + * These are the indices of various components within a lboard structure. + */ + +#define IP27_CPU0_INDEX 0 +#define IP27_CPU1_INDEX 1 +#define IP27_HUB_INDEX 2 +#define IP27_MEM_INDEX 3 + +#define BASEIO_BRIDGE_INDEX 0 +#define BASEIO_IOC3_INDEX 1 +#define BASEIO_SCSI1_INDEX 2 +#define BASEIO_SCSI2_INDEX 3 + +#define MIDPLANE_XBOW_INDEX 0 +#define ROUTER_COMPONENT_INDEX 0 + +#define CH4SCSI_BRIDGE_INDEX 0 + +/* Info holders for various hardware components */ + +typedef u64 *pci_t; +typedef u64 *vmeb_t; +typedef u64 *vmed_t; +typedef u64 *fddi_t; +typedef u64 *scsi_t; +typedef u64 *mio_t; +typedef u64 *graphics_t; +typedef u64 *router_t; + +/* + * The port info in ip27_cfg area translates to a lboart_t in the + * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t + * is stored in terms of a nasid and a offset from start of KLCONFIG + * area on that nasid. + */ +typedef struct klport_s { + nasid_t port_nasid; + unsigned char port_flag; + klconf_off_t port_offset; +} klport_t; + +#if 0 +/* + * This is very similar to the klport_s but instead of having a componant + * offset it has a board offset. + */ +typedef struct klxbow_port_s { + nasid_t port_nasid; + unsigned char port_flag; + klconf_off_t board_offset; +} klxbow_port_t; +#endif + +typedef struct klcpu_s { /* CPU */ + klinfo_t cpu_info; + unsigned short cpu_prid; /* Processor PRID value */ + unsigned short cpu_fpirr; /* FPU IRR value */ + unsigned short cpu_speed; /* Speed in MHZ */ + unsigned short cpu_scachesz; /* secondary cache size in MB */ + unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ +} klcpu_t ; + +#define CPU_STRUCT_VERSION 2 + +typedef struct klhub_s { /* HUB */ + klinfo_t hub_info; + uint hub_flags; /* PCFG_HUB_xxx flags */ + klport_t hub_port; /* hub is connected to this */ + nic_t hub_box_nic; /* nic of containing box */ + klconf_off_t hub_mfg_nic; /* MFG NIC string */ + u64 hub_speed; /* Speed of hub in HZ */ +} klhub_t ; + +typedef struct klhub_uart_s { /* HUB */ + klinfo_t hubuart_info; + uint hubuart_flags; /* PCFG_HUB_xxx flags */ + nic_t hubuart_box_nic; /* nic of containing box */ +} klhub_uart_t ; + +#define MEMORY_STRUCT_VERSION 2 + +typedef struct klmembnk_s { /* MEMORY BANK */ + klinfo_t membnk_info; + short membnk_memsz; /* Total memory in megabytes */ + short membnk_dimm_select; /* bank to physical addr mapping*/ + short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */ + short membnk_attr; +} klmembnk_t ; + +#define KLCONFIG_MEMBNK_SIZE(_info, _bank) \ + ((_info)->membnk_bnksz[(_bank)]) + + +#define MEMBNK_PREMIUM 1 +#define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \ + ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) + +#define MAX_SERIAL_NUM_SIZE 10 + +typedef struct klmod_serial_num_s { + klinfo_t snum_info; + union { + char snum_str[MAX_SERIAL_NUM_SIZE]; + unsigned long long snum_int; + } snum; +} klmod_serial_num_t; + +/* Macros needed to access serial number structure in lboard_t. + Hard coded values are necessary since we cannot treat + serial number struct as a component without losing compatibility + between prom versions. */ + +#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ + KLCF_COMP(_l, _l->brd_numcompts)) + +#define MAX_XBOW_LINKS 16 + +typedef struct klxbow_s { /* XBOW */ + klinfo_t xbow_info ; + klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */ + int xbow_master_hub_link; + /* type of brd connected+component struct ptr+flags */ +} klxbow_t ; + +#define MAX_PCI_SLOTS 8 + +typedef struct klpci_device_s { + s32 pci_device_id; /* 32 bits of vendor/device ID. */ + s32 pci_device_pad; /* 32 bits of padding. */ +} klpci_device_t; + +#define BRIDGE_STRUCT_VERSION 2 + +typedef struct klbri_s { /* BRIDGE */ + klinfo_t bri_info ; + unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ + unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ + pci_t pci_specific ; /* PCI Board config info */ + klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */ + klconf_off_t bri_mfg_nic ; +} klbri_t ; + +#define MAX_IOC3_TTY 2 + +typedef struct klioc3_s { /* IOC3 */ + klinfo_t ioc3_info ; + unsigned char ioc3_ssram ; /* Info about ssram */ + unsigned char ioc3_nvram ; /* Info about nvram */ + klinfo_t ioc3_superio ; /* Info about superio */ + klconf_off_t ioc3_tty_off ; + klinfo_t ioc3_enet ; + klconf_off_t ioc3_enet_off ; + klconf_off_t ioc3_kbd_off ; +} klioc3_t ; + +#define MAX_VME_SLOTS 8 + +typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ + klinfo_t vmeb_info ; + vmeb_t vmeb_specific ; + klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ +} klvmeb_t ; + +typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ + klinfo_t vmed_info ; + vmed_t vmed_specific ; + klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ +} klvmed_t ; + +#define ROUTER_VECTOR_VERS 2 + +/* XXX - Don't we need the number of ports here?!? */ +typedef struct klrou_s { /* ROUTER */ + klinfo_t rou_info ; + uint rou_flags ; /* PCFG_ROUTER_xxx flags */ + nic_t rou_box_nic ; /* nic of the containing module */ + klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ + klconf_off_t rou_mfg_nic ; /* MFG NIC string */ + u64 rou_vector; /* vector from master node */ +} klrou_t ; + +/* + * Graphics Controller/Device + * + * (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier + * used a couple different structures to store graphics information. + * For compatibility reasons, the newer data structure preserves some + * of the layout so that fields that are used in the old versions remain + * in the same place (with the same info). Determination of what version + * of this structure we have is done by checking the cookie field. + */ +#define KLGFX_COOKIE 0x0c0de000 + +typedef struct klgfx_s { /* GRAPHICS Device */ + klinfo_t gfx_info; + klconf_off_t old_gndevs; /* for compatibility with older proms */ + klconf_off_t old_gdoff0; /* for compatibility with older proms */ + uint cookie; /* for compatibility with older proms */ + uint moduleslot; + struct klgfx_s *gfx_next_pipe; + graphics_t gfx_specific; + klconf_off_t pad0; /* for compatibility with older proms */ + klconf_off_t gfx_mfg_nic; +} klgfx_t; + +typedef struct klxthd_s { + klinfo_t xthd_info ; + klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ +} klxthd_t ; + +typedef struct kltpu_s { /* TPU board */ + klinfo_t tpu_info ; + klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ +} kltpu_t ; + +typedef struct klgsn_s { /* GSN board */ + klinfo_t gsn_info ; + klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ +} klgsn_t ; + +#define MAX_SCSI_DEVS 16 + +/* + * NOTE: THis is the max sized kl* structure and is used in klmalloc.c + * to allocate space of type COMPONENT. Make sure that if the size of + * any other component struct becomes more than this, then redefine + * that as the size to be klmalloced. + */ + +typedef struct klscsi_s { /* SCSI Controller */ + klinfo_t scsi_info ; + scsi_t scsi_specific ; + unsigned char scsi_numdevs ; + klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ; +} klscsi_t ; + +typedef struct klscdev_s { /* SCSI device */ + klinfo_t scdev_info ; + struct scsidisk_data *scdev_cfg ; /* driver fills up this */ +} klscdev_t ; + +typedef struct klttydev_s { /* TTY device */ + klinfo_t ttydev_info ; + struct terminal_data *ttydev_cfg ; /* driver fills up this */ +} klttydev_t ; + +typedef struct klenetdev_s { /* ENET device */ + klinfo_t enetdev_info ; + struct net_data *enetdev_cfg ; /* driver fills up this */ +} klenetdev_t ; + +typedef struct klkbddev_s { /* KBD device */ + klinfo_t kbddev_info ; + struct keyboard_data *kbddev_cfg ; /* driver fills up this */ +} klkbddev_t ; + +typedef struct klmsdev_s { /* mouse device */ + klinfo_t msdev_info ; + void *msdev_cfg ; +} klmsdev_t ; + +#define MAX_FDDI_DEVS 10 /* XXX Is this true */ + +typedef struct klfddi_s { /* FDDI */ + klinfo_t fddi_info ; + fddi_t fddi_specific ; + klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ; +} klfddi_t ; + +typedef struct klmio_s { /* MIO */ + klinfo_t mio_info ; + mio_t mio_specific ; +} klmio_t ; + + +typedef union klcomp_s { + klcpu_t kc_cpu; + klhub_t kc_hub; + klmembnk_t kc_mem; + klxbow_t kc_xbow; + klbri_t kc_bri; + klioc3_t kc_ioc3; + klvmeb_t kc_vmeb; + klvmed_t kc_vmed; + klrou_t kc_rou; + klgfx_t kc_gfx; + klscsi_t kc_scsi; + klscdev_t kc_scsi_dev; + klfddi_t kc_fddi; + klmio_t kc_mio; + klmod_serial_num_t kc_snum ; +} klcomp_t; + +typedef union kldev_s { /* for device structure allocation */ + klscdev_t kc_scsi_dev ; + klttydev_t kc_tty_dev ; + klenetdev_t kc_enet_dev ; + klkbddev_t kc_kbd_dev ; +} kldev_t ; + +/* Data structure interface routines. TBD */ + +/* Include launch info in this file itself? TBD */ + +/* + * TBD - Can the ARCS and device driver related info also be included in the + * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t + * structure, viz private to the IO4prom. + */ + +/* + * TBD - Allocation issues. + * + * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component, + * errinfo and allocate from them, or have a single heap and allocate all + * structures from it. Debug is easier in the former method since we can + * dump all similar structs in one command, but there will be lots of holes, + * in memory and max limits are needed for number of structures. + * Another way to make it organized, is to have a union of all components + * and allocate a aligned chunk of memory greater than the biggest + * component. + */ + +typedef union { + lboard_t *lbinfo ; +} biptr_t ; + + +#define BRI_PER_XBOW 6 +#define PCI_PER_BRI 8 +#define DEV_PER_PCI 16 + + +/* Virtual dipswitch values (starting from switch "7"): */ + +#define VDS_NOGFX 0x8000 /* Don't enable gfx and autoboot */ +#define VDS_NOMP 0x100 /* Don't start slave processors */ +#define VDS_MANUMODE 0x80 /* Manufacturing mode */ +#define VDS_NOARB 0x40 /* No bootmaster arbitration */ +#define VDS_PODMODE 0x20 /* Go straight to POD mode */ +#define VDS_NO_DIAGS 0x10 /* Don't run any diags after BM arb */ +#define VDS_DEFAULTS 0x08 /* Use default environment values */ +#define VDS_NOMEMCLEAR 0x04 /* Don't run mem cfg code */ +#define VDS_2ND_IO4 0x02 /* Boot from the second IO4 */ +#define VDS_DEBUG_PROM 0x01 /* Print PROM debugging messages */ + +/* external declarations of Linux kernel functions. */ + +extern lboard_t *find_lboard(lboard_t *start, unsigned char type); +extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type); +extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type); +extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int); +extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class); + + +#if defined(CONFIG_SGI_IO) +extern xwidgetnum_t nodevertex_widgetnum_get(vertex_hdl_t node_vtx); +extern vertex_hdl_t nodevertex_xbow_peer_get(vertex_hdl_t node_vtx); +extern lboard_t *find_gfxpipe(int pipenum); +extern void setup_gfxpipe_link(vertex_hdl_t vhdl,int pipenum); +extern lboard_t *find_lboard_module_class(lboard_t *start, moduleid_t mod, + unsigned char brd_class); +extern lboard_t *find_nic_lboard(lboard_t *, nic_t); +extern lboard_t *find_nic_type_lboard(nasid_t, unsigned char, nic_t); +extern lboard_t *find_lboard_modslot(lboard_t *start, moduleid_t mod, slotid_t slot); +extern lboard_t *find_lboard_module(lboard_t *start, moduleid_t mod); +extern lboard_t *get_board_name(nasid_t nasid, moduleid_t mod, slotid_t slot, char *name); +extern int config_find_nic_router(nasid_t, nic_t, lboard_t **, klrou_t**); +extern int config_find_nic_hub(nasid_t, nic_t, lboard_t **, klhub_t**); +extern int config_find_xbow(nasid_t, lboard_t **, klxbow_t**); +extern klcpu_t *get_cpuinfo(cpuid_t cpu); +extern int update_klcfg_cpuinfo(nasid_t, int); +extern void board_to_path(lboard_t *brd, char *path); +extern moduleid_t get_module_id(nasid_t nasid); +extern void nic_name_convert(char *old_name, char *new_name); +extern int module_brds(nasid_t nasid, lboard_t **module_brds, int n); +extern lboard_t *brd_from_key(ulong_t key); +extern void device_component_canonical_name_get(lboard_t *,klinfo_t *, + char *); +extern int board_serial_number_get(lboard_t *,char *); +extern int is_master_baseio(nasid_t,moduleid_t,slotid_t); +extern nasid_t get_actual_nasid(lboard_t *brd) ; +extern net_vec_t klcfg_discover_route(lboard_t *, lboard_t *, int); +#else /* CONFIG_SGI_IO */ +extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu); +#endif /* CONFIG_SGI_IO */ + +#endif /* _ASM_SN_KLCONFIG_H */ |
