diff options
Diffstat (limited to 'include/asm-mips/asm.h')
| -rw-r--r-- | include/asm-mips/asm.h | 409 |
1 files changed, 0 insertions, 409 deletions
diff --git a/include/asm-mips/asm.h b/include/asm-mips/asm.h deleted file mode 100644 index 608cfcf..0000000 --- a/include/asm-mips/asm.h +++ /dev/null @@ -1,409 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle - * Copyright (C) 1999 by Silicon Graphics, Inc. - * Copyright (C) 2001 MIPS Technologies, Inc. - * Copyright (C) 2002 Maciej W. Rozycki - * - * Some useful macros for MIPS assembler code - * - * Some of the routines below contain useless nops that will be optimized - * away by gas in -O mode. These nops are however required to fill delay - * slots in noreorder mode. - */ -#ifndef __ASM_ASM_H -#define __ASM_ASM_H - -#include <asm/sgidefs.h> - -#ifndef CAT -#ifdef __STDC__ -#define __CAT(str1, str2) str1##str2 -#else -#define __CAT(str1, str2) str1/**/str2 -#endif -#define CAT(str1, str2) __CAT(str1, str2) -#endif - -/* - * PIC specific declarations - * Not used for the kernel but here seems to be the right place. - */ -#ifdef __PIC__ -#define CPRESTORE(register) \ - .cprestore register -#define CPADD(register) \ - .cpadd register -#define CPLOAD(register) \ - .cpload register -#else -#define CPRESTORE(register) -#define CPADD(register) -#define CPLOAD(register) -#endif - -/* - * LEAF - declare leaf routine - */ -#define LEAF(symbol) \ - .globl symbol; \ - .align 2; \ - .type symbol, @function; \ - .ent symbol, 0; \ -symbol: .frame sp, 0, ra - -/* - * NESTED - declare nested routine entry point - */ -#define NESTED(symbol, framesize, rpc) \ - .globl symbol; \ - .align 2; \ - .type symbol, @function; \ - .ent symbol, 0; \ -symbol: .frame sp, framesize, rpc - -/* - * END - mark end of function - */ -#define END(function) \ - .end function; \ - .size function, .-function - -/* - * EXPORT - export definition of symbol - */ -#define EXPORT(symbol) \ - .globl symbol; \ -symbol: - -/* - * FEXPORT - export definition of a function symbol - */ -#define FEXPORT(symbol) \ - .globl symbol; \ - .type symbol, @function; \ -symbol: - -/* - * ABS - export absolute symbol - */ -#define ABS(symbol,value) \ - .globl symbol; \ -symbol = value - -#define PANIC(msg) \ - .set push; \ - .set reorder; \ - PTR_LA a0, 8f; \ - jal panic; \ -9: b 9b; \ - .set pop; \ - TEXT(msg) - -/* - * Print formatted string - */ -#ifdef CONFIG_PRINTK -#define PRINT(string) \ - .set push; \ - .set reorder; \ - PTR_LA a0, 8f; \ - jal printk; \ - .set pop; \ - TEXT(string) -#else -#define PRINT(string) -#endif - -#define TEXT(msg) \ - .pushsection .data; \ -8: .asciiz msg; \ - .popsection; - -/* - * Build text tables - */ -#define TTABLE(string) \ - .pushsection .text; \ - .word 1f; \ - .popsection \ - .pushsection .data; \ -1: .asciiz string; \ - .popsection - -/* - * MIPS IV pref instruction. - * Use with .set noreorder only! - * - * MIPS IV implementations are free to treat this as a nop. The R5000 - * is one of them. So we should have an option not to use this instruction. - */ -#ifdef CONFIG_CPU_HAS_PREFETCH - -#define PREF(hint,addr) \ - .set push; \ - .set mips4; \ - pref hint, addr; \ - .set pop - -#define PREFX(hint,addr) \ - .set push; \ - .set mips4; \ - prefx hint, addr; \ - .set pop - -#else /* !CONFIG_CPU_HAS_PREFETCH */ - -#define PREF(hint, addr) -#define PREFX(hint, addr) - -#endif /* !CONFIG_CPU_HAS_PREFETCH */ - -/* - * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs. - */ -#if (_MIPS_ISA == _MIPS_ISA_MIPS1) -#define MOVN(rd, rs, rt) \ - .set push; \ - .set reorder; \ - beqz rt, 9f; \ - move rd, rs; \ - .set pop; \ -9: -#define MOVZ(rd, rs, rt) \ - .set push; \ - .set reorder; \ - bnez rt, 9f; \ - move rd, rs; \ - .set pop; \ -9: -#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */ -#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) -#define MOVN(rd, rs, rt) \ - .set push; \ - .set noreorder; \ - bnezl rt, 9f; \ - move rd, rs; \ - .set pop; \ -9: -#define MOVZ(rd, rs, rt) \ - .set push; \ - .set noreorder; \ - beqzl rt, 9f; \ - move rd, rs; \ - .set pop; \ -9: -#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */ -#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \ - (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64) -#define MOVN(rd, rs, rt) \ - movn rd, rs, rt -#define MOVZ(rd, rs, rt) \ - movz rd, rs, rt -#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */ - -/* - * Stack alignment - */ -#if (_MIPS_SIM == _MIPS_SIM_ABI32) -#define ALSZ 7 -#define ALMASK ~7 -#endif -#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) -#define ALSZ 15 -#define ALMASK ~15 -#endif - -/* - * Macros to handle different pointer/register sizes for 32/64-bit code - */ - -/* - * Size of a register - */ -#ifdef __mips64 -#define SZREG 8 -#else -#define SZREG 4 -#endif - -/* - * Use the following macros in assemblercode to load/store registers, - * pointers etc. - */ -#if (_MIPS_SIM == _MIPS_SIM_ABI32) -#define REG_S sw -#define REG_L lw -#define REG_SUBU subu -#define REG_ADDU addu -#endif -#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) -#define REG_S sd -#define REG_L ld -#define REG_SUBU dsubu -#define REG_ADDU daddu -#endif - -/* - * How to add/sub/load/store/shift C int variables. - */ -#if (_MIPS_SZINT == 32) -#define INT_ADD add -#define INT_ADDU addu -#define INT_ADDI addi -#define INT_ADDIU addiu -#define INT_SUB sub -#define INT_SUBU subu -#define INT_L lw -#define INT_S sw -#define INT_SLL sll -#define INT_SLLV sllv -#define INT_SRL srl -#define INT_SRLV srlv -#define INT_SRA sra -#define INT_SRAV srav -#endif - -#if (_MIPS_SZINT == 64) -#define INT_ADD dadd -#define INT_ADDU daddu -#define INT_ADDI daddi -#define INT_ADDIU daddiu -#define INT_SUB dsub -#define INT_SUBU dsubu -#define INT_L ld -#define INT_S sd -#define INT_SLL dsll -#define INT_SLLV dsllv -#define INT_SRL dsrl -#define INT_SRLV dsrlv -#define INT_SRA dsra -#define INT_SRAV dsrav -#endif - -/* - * How to add/sub/load/store/shift C long variables. - */ -#if (_MIPS_SZLONG == 32) -#define LONG_ADD add -#define LONG_ADDU addu -#define LONG_ADDI addi -#define LONG_ADDIU addiu -#define LONG_SUB sub -#define LONG_SUBU subu -#define LONG_L lw -#define LONG_S sw -#define LONG_SLL sll -#define LONG_SLLV sllv -#define LONG_SRL srl -#define LONG_SRLV srlv -#define LONG_SRA sra -#define LONG_SRAV srav - -#define LONG .word -#define LONGSIZE 4 -#define LONGMASK 3 -#define LONGLOG 2 -#endif - -#if (_MIPS_SZLONG == 64) -#define LONG_ADD dadd -#define LONG_ADDU daddu -#define LONG_ADDI daddi -#define LONG_ADDIU daddiu -#define LONG_SUB dsub -#define LONG_SUBU dsubu -#define LONG_L ld -#define LONG_S sd -#define LONG_SLL dsll -#define LONG_SLLV dsllv -#define LONG_SRL dsrl -#define LONG_SRLV dsrlv -#define LONG_SRA dsra -#define LONG_SRAV dsrav - -#define LONG .dword -#define LONGSIZE 8 -#define LONGMASK 7 -#define LONGLOG 3 -#endif - -/* - * How to add/sub/load/store/shift pointers. - */ -#if (_MIPS_SZPTR == 32) -#define PTR_ADD add -#define PTR_ADDU addu -#define PTR_ADDI addi -#define PTR_ADDIU addiu -#define PTR_SUB sub -#define PTR_SUBU subu -#define PTR_L lw -#define PTR_S sw -#define PTR_LA la -#define PTR_LI li -#define PTR_SLL sll -#define PTR_SLLV sllv -#define PTR_SRL srl -#define PTR_SRLV srlv -#define PTR_SRA sra -#define PTR_SRAV srav - -#define PTR_SCALESHIFT 2 - -#define PTR .word -#define PTRSIZE 4 -#define PTRLOG 2 -#endif - -#if (_MIPS_SZPTR == 64) -#define PTR_ADD dadd -#define PTR_ADDU daddu -#define PTR_ADDI daddi -#define PTR_ADDIU daddiu -#define PTR_SUB dsub -#define PTR_SUBU dsubu -#define PTR_L ld -#define PTR_S sd -#define PTR_LA dla -#define PTR_LI dli -#define PTR_SLL dsll -#define PTR_SLLV dsllv -#define PTR_SRL dsrl -#define PTR_SRLV dsrlv -#define PTR_SRA dsra -#define PTR_SRAV dsrav - -#define PTR_SCALESHIFT 3 - -#define PTR .dword -#define PTRSIZE 8 -#define PTRLOG 3 -#endif - -/* - * Some cp0 registers were extended to 64bit for MIPS III. - */ -#if (_MIPS_SIM == _MIPS_SIM_ABI32) -#define MFC0 mfc0 -#define MTC0 mtc0 -#endif -#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) -#define MFC0 dmfc0 -#define MTC0 dmtc0 -#endif - -#define SSNOP sll zero, zero, 1 - -#ifdef CONFIG_SGI_IP28 -/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */ -#include <asm/cacheops.h> -#define R10KCBARRIER(addr) cache Cache_Barrier, addr; -#else -#define R10KCBARRIER(addr) -#endif - -#endif /* __ASM_ASM_H */ |
