diff options
Diffstat (limited to 'include/asm-ia64/sn/bte.h')
-rw-r--r-- | include/asm-ia64/sn/bte.h | 148 |
1 files changed, 148 insertions, 0 deletions
diff --git a/include/asm-ia64/sn/bte.h b/include/asm-ia64/sn/bte.h new file mode 100644 index 0000000..0ec27f9 --- /dev/null +++ b/include/asm-ia64/sn/bte.h @@ -0,0 +1,148 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved. + */ + + +#ifndef _ASM_IA64_SN_BTE_H +#define _ASM_IA64_SN_BTE_H + +#include <linux/timer.h> +#include <linux/spinlock.h> +#include <linux/cache.h> +#include <asm/sn/types.h> + + +/* #define BTE_DEBUG */ +/* #define BTE_DEBUG_VERBOSE */ + +#ifdef BTE_DEBUG +# define BTE_PRINTK(x) printk x /* Terse */ +# ifdef BTE_DEBUG_VERBOSE +# define BTE_PRINTKV(x) printk x /* Verbose */ +# else +# define BTE_PRINTKV(x) +# endif /* BTE_DEBUG_VERBOSE */ +#else +# define BTE_PRINTK(x) +# define BTE_PRINTKV(x) +#endif /* BTE_DEBUG */ + + +/* BTE status register only supports 16 bits for length field */ +#define BTE_LEN_BITS (16) +#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1) +#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES) + + +/* Define hardware */ +#define BTES_PER_NODE 2 + + +/* Define hardware modes */ +#define BTE_NOTIFY (IBCT_NOTIFY) +#define BTE_NORMAL BTE_NOTIFY +#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE) +/* Use a reserved bit to let the caller specify a wait for any BTE */ +#define BTE_WACQUIRE (0x4000) +/* Use the BTE on the node with the destination memory */ +#define BTE_USE_DEST (BTE_WACQUIRE << 1) +/* Use any available BTE interface on any node for the transfer */ +#define BTE_USE_ANY (BTE_USE_DEST << 1) +/* macro to force the IBCT0 value valid */ +#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE)) + +#define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR) +#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1) +#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE) + +/* + * Some macros to simplify reading. + * Start with macros to locate the BTE control registers. + */ +#define BTE_LNSTAT_LOAD(_bte) \ + HUB_L(_bte->bte_base_addr) +#define BTE_LNSTAT_STORE(_bte, _x) \ + HUB_S(_bte->bte_base_addr, (_x)) +#define BTE_SRC_STORE(_bte, _x) \ + HUB_S(_bte->bte_base_addr + (BTEOFF_SRC/8), (_x)) +#define BTE_DEST_STORE(_bte, _x) \ + HUB_S(_bte->bte_base_addr + (BTEOFF_DEST/8), (_x)) +#define BTE_CTRL_STORE(_bte, _x) \ + HUB_S(_bte->bte_base_addr + (BTEOFF_CTRL/8), (_x)) +#define BTE_NOTIF_STORE(_bte, _x) \ + HUB_S(_bte->bte_base_addr + (BTEOFF_NOTIFY/8), (_x)) + + +/* Possible results from bte_copy and bte_unaligned_copy */ +/* The following error codes map into the BTE hardware codes + * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses + * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero + * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error + * codes to give the following error codes. + */ +#define BTEFAIL_OFFSET 1 + +typedef enum { + BTE_SUCCESS, /* 0 is success */ + BTEFAIL_DIR, /* Directory error due to IIO access*/ + BTEFAIL_POISON, /* poison error on IO access (write to poison page) */ + BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */ + BTEFAIL_ACCESS, /* access error (protection violation) */ + BTEFAIL_PWERR, /* Partial Write Error */ + BTEFAIL_PRERR, /* Partial Read Error */ + BTEFAIL_TOUT, /* CRB Time out */ + BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */ + BTEFAIL_NOTAVAIL, /* BTE not available */ +} bte_result_t; + + +/* + * Structure defining a bte. An instance of this + * structure is created in the nodepda for each + * bte on that node (as defined by BTES_PER_NODE) + * This structure contains everything necessary + * to work with a BTE. + */ +struct bteinfo_s { + volatile u64 notify ____cacheline_aligned; + u64 *bte_base_addr ____cacheline_aligned; + spinlock_t spinlock; + cnodeid_t bte_cnode; /* cnode */ + int bte_error_count; /* Number of errors encountered */ + int bte_num; /* 0 --> BTE0, 1 --> BTE1 */ + int cleanup_active; /* Interface is locked for cleanup */ + volatile bte_result_t bh_error; /* error while processing */ + volatile u64 *most_rcnt_na; +}; + + +/* + * Function prototypes (functions defined in bte.c, used elsewhere) + */ +extern bte_result_t bte_copy(u64, u64, u64, u64, void *); +extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64); +extern void bte_error_handler(unsigned long); + +#define bte_zero(dest, len, mode, notification) \ + bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification) + +/* + * The following is the prefered way of calling bte_unaligned_copy + * If the copy is fully cache line aligned, then bte_copy is + * used instead. Since bte_copy is inlined, this saves a call + * stack. NOTE: bte_copy is called synchronously and does block + * until the transfer is complete. In order to get the asynch + * version of bte_copy, you must perform this check yourself. + */ +#define BTE_UNALIGNED_COPY(src, dest, len, mode) \ + (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \ + (dest & L1_CACHE_MASK)) ? \ + bte_unaligned_copy(src, dest, len, mode) : \ + bte_copy(src, dest, len, mode, NULL)) + + +#endif /* _ASM_IA64_SN_BTE_H */ |