diff options
Diffstat (limited to 'include/asm-blackfin/mach-bf537/anomaly.h')
| -rw-r--r-- | include/asm-blackfin/mach-bf537/anomaly.h | 120 |
1 files changed, 120 insertions, 0 deletions
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h new file mode 100644 index 0000000..7f040f5 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -0,0 +1,120 @@ + +/* + * File: include/asm-blackfin/mach-bf537/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* This file shoule be up to date with: + * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List + * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List + * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1)) +#error Kernel will not work on BF537/6/4 Version 0.1 +#endif + +#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive + Channel DMA stops */ +#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR + registers. */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits*/ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is + Changed */ +#endif +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + SPORT external receive and transmit clocks. */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic + control */ +#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when + killed in a particular stage*/ +#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC + registers are interrupted */ +#endif + +#if defined(CONFIG_BF_REV_0_2) +#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or + IDLE around a Change of Control causes + unpredictable results */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */ +#endif +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event + interrupt not functional */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */ +#endif +#define ANOMALY_05000257 /* An interrupt or exception during short Hardware + loops may cause the instruction fetch unit to + malfunction */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of + the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE + instruction will cause an infinite stall in the + second to last instruction in a hardware loop */ +#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running + and non-zero DEB_TRAFFIC_PERIOD value */ +#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000280 /* SPI Master boot mode does not work well with + Atmel Dataflash devices */ + +#endif /* CONFIG_BF_REV_0_2 */ + +#endif /* _MACH_ANOMALY_H_ */ |
