diff options
Diffstat (limited to 'include/asm-blackfin/cplbinit.h')
| -rw-r--r-- | include/asm-blackfin/cplbinit.h | 203 |
1 files changed, 203 insertions, 0 deletions
diff --git a/include/asm-blackfin/cplbinit.h b/include/asm-blackfin/cplbinit.h new file mode 100644 index 0000000..3bad2d1 --- /dev/null +++ b/include/asm-blackfin/cplbinit.h @@ -0,0 +1,203 @@ +/* + * File: include/asm-blackfin/cplbinit.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <asm/blackfin.h> +#include <asm/cplb.h> + +#define INITIAL_T 0x1 +#define SWITCH_T 0x2 +#define I_CPLB 0x4 +#define D_CPLB 0x8 + +#define IN_KERNEL 1 + +enum +{ZERO_P, L1I_MEM, L1D_MEM, SDRAM_KERN , SDRAM_RAM_MTD, SDRAM_DMAZ, RES_MEM, ASYNC_MEM, L2_MEM}; + +struct cplb_desc { + u32 start; /* start address */ + u32 end; /* end address */ + u32 psize; /* prefered size if any otherwise 1MB or 4MB*/ + u16 attr;/* attributes */ + u16 i_conf;/* I-CPLB DATA */ + u16 d_conf;/* D-CPLB DATA */ + u16 valid;/* valid */ + const s8 name[30];/* name */ +}; + +struct cplb_tab { + u_long *tab; + u16 pos; + u16 size; +}; + +u_long icplb_table[MAX_CPLBS+1]; +u_long dcplb_table[MAX_CPLBS+1]; + +/* Till here we are discussing about the static memory management model. + * However, the operating envoronments commonly define more CPLB + * descriptors to cover the entire addressable memory than will fit into + * the available on-chip 16 CPLB MMRs. When this happens, the below table + * will be used which will hold all the potentially required CPLB descriptors + * + * This is how Page descriptor Table is implemented in uClinux/Blackfin. + */ + +#ifdef CONFIG_CPLB_SWITCH_TAB_L1 +u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data)); +u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data)); + +#ifdef CONFIG_CPLB_INFO +u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data)); +u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data)); +#endif /* CONFIG_CPLB_INFO */ + +#else + +u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]; +u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]; + +#ifdef CONFIG_CPLB_INFO +u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]; +u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]; +#endif /* CONFIG_CPLB_INFO */ + +#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/ + +struct s_cplb { + struct cplb_tab init_i; + struct cplb_tab init_d; + struct cplb_tab switch_i; + struct cplb_tab switch_d; +}; + +#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) +static struct cplb_desc cplb_data[] = { + { + .start = 0, + .end = SIZE_4K, + .psize = SIZE_4K, + .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, + .i_conf = SDRAM_OOPS, + .d_conf = SDRAM_OOPS, +#if defined(CONFIG_DEBUG_HUNT_FOR_ZERO) + .valid = 1, +#else + .valid = 0, +#endif + .name = "ZERO Pointer Saveguard", + }, + { + .start = L1_CODE_START, + .end = L1_CODE_START + L1_CODE_LENGTH, + .psize = SIZE_4M, + .attr = INITIAL_T | SWITCH_T | I_CPLB, + .i_conf = L1_IMEMORY, + .d_conf = 0, + .valid = 1, + .name = "L1 I-Memory", + }, + { + .start = L1_DATA_A_START, + .end = L1_DATA_B_START + L1_DATA_B_LENGTH, + .psize = SIZE_4M, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .i_conf = 0, + .d_conf = L1_DMEMORY, +#if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0)) + .valid = 1, +#else + .valid = 0, +#endif + .name = "L1 D-Memory", + }, + { + .start = 0, + .end = 0, /* dynamic */ + .psize = 0, + .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DGENERIC, + .valid = 1, + .name = "SDRAM Kernel", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = 0, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DNON_CHBL, + .valid = 1, + .name = "SDRAM RAM MTD", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = SIZE_1M, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .d_conf = SDRAM_DNON_CHBL, + .valid = 1,//(DMA_UNCACHED_REGION > 0), + .name = "SDRAM Uncached DMA ZONE", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = 0, + .attr = SWITCH_T | D_CPLB, + .i_conf = 0, /* dynamic */ + .d_conf = 0, /* dynamic */ + .valid = 1, + .name = "SDRAM Reserved Memory", + }, + { + .start = ASYNC_BANK0_BASE, + .end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE, + .psize = 0, + .attr = SWITCH_T | D_CPLB, + .d_conf = SDRAM_EBIU, + .valid = 1, + .name = "ASYNC Memory", + }, + { +#if defined(CONFIG_BF561) + .start = L2_SRAM, + .end = L2_SRAM_END, + .psize = SIZE_1M, + .attr = SWITCH_T | D_CPLB, + .i_conf = L2_MEMORY, + .d_conf = L2_MEMORY, + .valid = 1, +#else + .valid = 0, +#endif + .name = "L2 Memory", + } +}; +#endif |
