summaryrefslogtreecommitdiffstats
path: root/include/asm-arm
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm')
-rw-r--r--include/asm-arm/arch-at91/io.h2
-rw-r--r--include/asm-arm/arch-omap/board-palmte.h2
-rw-r--r--include/asm-arm/arch-omap/clock.h5
-rw-r--r--include/asm-arm/arch-omap/common.h4
-rw-r--r--include/asm-arm/arch-omap/control.h2
-rw-r--r--include/asm-arm/arch-omap/entry-macro.S1
-rw-r--r--include/asm-arm/arch-omap/gpio.h1
-rw-r--r--include/asm-arm/arch-omap/hardware.h1
-rw-r--r--include/asm-arm/arch-omap/mmc.h24
-rw-r--r--include/asm-arm/arch-pxa/mfp-pxa27x.h1
-rw-r--r--include/asm-arm/arch-pxa/pm.h2
-rw-r--r--include/asm-arm/arch-pxa/pxa2xx-gpio.h9
-rw-r--r--include/asm-arm/arch-pxa/regs-lcd.h5
-rw-r--r--include/asm-arm/arch-pxa/system.h3
-rw-r--r--include/asm-arm/arch-sa1100/collie.h4
-rw-r--r--include/asm-arm/arch-sa1100/irqs.h2
-rw-r--r--include/asm-arm/hardware/locomo.h19
-rw-r--r--include/asm-arm/page.h4
-rw-r--r--include/asm-arm/pgtable-nommu.h1
-rw-r--r--include/asm-arm/spinlock.h2
-rw-r--r--include/asm-arm/system.h29
-rw-r--r--include/asm-arm/types.h33
22 files changed, 79 insertions, 77 deletions
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
index 80073fd..f8beaa2 100644
--- a/include/asm-arm/arch-at91/io.h
+++ b/include/asm-arm/arch-at91/io.h
@@ -21,8 +21,6 @@
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
-#include <asm/io.h>
-
#define IO_SPACE_LIMIT 0xFFFFFFFF
#define __io(a) ((void __iomem *)(a))
diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h
index cd22035..6fac2c8 100644
--- a/include/asm-arm/arch-omap/board-palmte.h
+++ b/include/asm-arm/arch-omap/board-palmte.h
@@ -14,8 +14,6 @@
#ifndef __OMAP_BOARD_PALMTE_H
#define __OMAP_BOARD_PALMTE_H
-#include <asm/arch/gpio.h>
-
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
#define PALMTE_TSC_GPIO 4
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index 57523bd..12a5e4d 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -73,6 +73,8 @@ struct clk {
#endif
};
+struct cpufreq_frequency_table;
+
struct clk_functions {
int (*clk_enable)(struct clk *clk);
void (*clk_disable)(struct clk *clk);
@@ -83,6 +85,9 @@ struct clk_functions {
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+ void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
};
extern unsigned int mpurate;
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h
index 224e009..36a3b62 100644
--- a/include/asm-arm/arch-omap/common.h
+++ b/include/asm-arm/arch-omap/common.h
@@ -47,4 +47,8 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
}
#endif
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
index 9944bb5..59c0686 100644
--- a/include/asm-arm/arch-omap/control.h
+++ b/include/asm-arm/arch-omap/control.h
@@ -80,7 +80,7 @@
#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064)
#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c)
#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074)
#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088)
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index 74cd572..369093a 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -8,6 +8,7 @@
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware.h>
+#include <asm/arch/io.h>
#include <asm/arch/irqs.h>
#if defined(CONFIG_ARCH_OMAP1)
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
index 86621a0..5ee6a49 100644
--- a/include/asm-arm/arch-omap/gpio.h
+++ b/include/asm-arm/arch-omap/gpio.h
@@ -26,7 +26,6 @@
#ifndef __ASM_ARCH_OMAP_GPIO_H
#define __ASM_ARCH_OMAP_GPIO_H
-#include <asm/hardware.h>
#include <asm/arch/irqs.h>
#include <asm/io.h>
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index da57209..91d85b3 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -41,7 +41,6 @@
#include <asm/types.h>
#include <asm/arch/cpu.h>
#endif
-#include <asm/arch/io.h>
#include <asm/arch/serial.h>
/*
diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h
index c9588f4..7cfc5f2 100644
--- a/include/asm-arm/arch-omap/mmc.h
+++ b/include/asm-arm/arch-omap/mmc.h
@@ -15,21 +15,16 @@
#include <linux/device.h>
#include <linux/mmc/host.h>
+#include <asm/arch/board.h>
+
#define OMAP_MMC_MAX_SLOTS 2
struct omap_mmc_platform_data {
struct omap_mmc_conf conf;
- unsigned enabled:1;
/* number of slots on board */
unsigned nr_slots:2;
- /* nomux means "standard" muxing is wrong on this board, and that
- * board-specific code handled it before common init logic.
- */
- unsigned nomux:1;
- /* 4 wire signaling is optional, and is only used for SD/SDIO and
- * MMCv4 */
- unsigned wire4:1;
+
/* set if your board has components or wiring that limits the
* maximum frequency on the MMC bus */
unsigned int max_freq;
@@ -40,6 +35,11 @@ struct omap_mmc_platform_data {
* not supported */
int (* init)(struct device *dev);
void (* cleanup)(struct device *dev);
+ void (* shutdown)(struct device *dev);
+
+ /* To handle board related suspend/resume functionality for MMC */
+ int (*suspend)(struct device *dev, int slot);
+ int (*resume)(struct device *dev, int slot);
struct omap_mmc_slot_data {
int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
@@ -56,13 +56,19 @@ struct omap_mmc_platform_data {
const char *name;
u32 ocr_mask;
+
+ /* Card detection IRQs */
+ int card_detect_irq;
+ int (* card_detect)(int irq);
+
+ unsigned int ban_openended:1;
+
} slots[OMAP_MMC_MAX_SLOTS];
};
extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_card_detect(struct device *dev, int slot, int detected);
extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
#endif
diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h
index eb6eaa1..bc73ab8 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa27x.h
+++ b/include/asm-arm/arch-pxa/mfp-pxa27x.h
@@ -112,6 +112,7 @@
#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
/* I2C */
#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1)
diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h
index 9d9f4b5..261e5bc 100644
--- a/include/asm-arm/arch-pxa/pm.h
+++ b/include/asm-arm/arch-pxa/pm.h
@@ -10,7 +10,7 @@
#include <linux/suspend.h>
struct pxa_cpu_pm_fns {
- int save_size;
+ int save_count;
void (*save)(unsigned long *);
void (*restore)(unsigned long *);
int (*valid)(suspend_state_t state);
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
index 763313c..b81cd63 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h
+++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
@@ -134,7 +134,11 @@
#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */
#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */
#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */
+#define GPIO96_FFRXD 96 /* FFUART recieve */
+#define GPIO98_FFRTS 98 /* FFUART request to send */
#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */
+#define GPIO99_FFTXD 99 /* FFUART transmit data */
+#define GPIO100_FFCTS 100 /* FFUART Clear to send */
#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */
#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */
#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */
@@ -316,6 +320,8 @@
#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT)
#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN)
#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT)
+#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN)
+#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT)
#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN)
#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN)
#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT)
@@ -324,8 +330,11 @@
#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN)
#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN)
#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN)
+#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN)
#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN)
#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN)
+#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT)
+#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT)
#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN)
#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN)
#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT)
diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h
index f762493..3ba464c9 100644
--- a/include/asm-arm/arch-pxa/regs-lcd.h
+++ b/include/asm-arm/arch-pxa/regs-lcd.h
@@ -1,5 +1,8 @@
#ifndef __ASM_ARCH_REGS_LCD_H
#define __ASM_ARCH_REGS_LCD_H
+
+#include <asm/arch/bitfield.h>
+
/*
* LCD Controller Registers and Bits Definitions
*/
@@ -69,7 +72,7 @@
#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
#define LCCR0_PDD_S 12
-#define LCCR0_BM (1 << 20) /* Branch mask */
+#define LCCR0_BM (1 << 20) /* Branch mask */
#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
#define LCCR0_LCDT (1 << 22) /* LCD panel type */
#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
index a758a71..9aa6c2e 100644
--- a/include/asm-arm/arch-pxa/system.h
+++ b/include/asm-arm/arch-pxa/system.h
@@ -22,7 +22,8 @@ static inline void arch_idle(void)
static inline void arch_reset(char mode)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+ if (cpu_is_pxa2xx())
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
if (mode == 's') {
/* Jump into ROM at address 0 */
diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h
index 14a344a..762eba53 100644
--- a/include/asm-arm/arch-sa1100/collie.h
+++ b/include/asm-arm/arch-sa1100/collie.h
@@ -34,9 +34,12 @@
#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0)
#define COLLIE_GPIO_AC_IN GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11)
#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14)
#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15)
#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18)
#define COLLIE_GPIO_CO GPIO_GPIO (20)
#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21)
#define COLLIE_GPIO_CF_CD GPIO_GPIO (22)
@@ -49,6 +52,7 @@
#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11
#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14
#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15
#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20
diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h
index d794068..7bf8048 100644
--- a/include/asm-arm/arch-sa1100/irqs.h
+++ b/include/asm-arm/arch-sa1100/irqs.h
@@ -141,7 +141,7 @@
#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20)
#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
/*
diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h
index adab777..fb0645d 100644
--- a/include/asm-arm/hardware/locomo.h
+++ b/include/asm-arm/hardware/locomo.h
@@ -58,6 +58,11 @@
#define LOCOMO_SPIMD 0x00 /* SPI mode setting */
#define LOCOMO_SPICT 0x04 /* SPI mode control */
#define LOCOMO_SPIST 0x08 /* SPI status */
+#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
+#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */
+#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
+#define LOCOMO_SPI_RFR (1) /* read buffer bit */
+
#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */
#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */
#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */
@@ -66,16 +71,12 @@
#define LOCOMO_SPIRD 0x24 /* SPI receive data read */
#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */
#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */
-#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
-#define LOCOMO_SPI_OVRN (1 << 2) /* Over Run bit */
-#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
-#define LOCOMO_SPI_RFR (1) /* read buffer bit */
/* GPIO */
#define LOCOMO_GPD 0x90 /* GPIO direction */
#define LOCOMO_GPE 0x94 /* GPIO input enable */
#define LOCOMO_GPL 0x98 /* GPIO level */
-#define LOCOMO_GPO 0x9c /* GPIO out data setteing */
+#define LOCOMO_GPO 0x9c /* GPIO out data setting */
#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */
#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */
#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */
@@ -96,6 +97,9 @@
#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10)
#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11)
#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12)
+#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14)
+#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15)
/* Start the definitions of the devices. Each device has an initial
* base address and a series of offsets from that base address. */
@@ -122,7 +126,7 @@
/* Audio controller */
#define LOCOMO_AUDIO 0x54
#define LOCOMO_ACC 0x00 /* Audio clock */
-#define LOCOMO_PAIF 0x7C /* PCM audio interface */
+#define LOCOMO_PAIF 0xD0 /* PCM audio interface */
/* Audio clock */
#define LOCOMO_ACC_XON 0x80
#define LOCOMO_ACC_XEN 0x40
@@ -162,7 +166,7 @@ extern struct bus_type locomo_bus_type;
#define LOCOMO_DEVID_AUDIO 3
#define LOCOMO_DEVID_LED 4
#define LOCOMO_DEVID_UART 5
-#define LOCOMO_DEVID_SPI 6
+#define LOCOMO_DEVID_SPI 6
struct locomo_dev {
struct device dev;
@@ -204,7 +208,6 @@ int locomo_gpio_read_level(struct device *dev, unsigned int bits);
int locomo_gpio_read_output(struct device *dev, unsigned int bits);
void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
-
/* M62332 control function */
void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 5c22b01..8e05bdb 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -179,10 +179,10 @@ typedef unsigned long pgprot_t;
#endif /* STRICT_MM_TYPECHECKS */
-typedef struct page *pgtable_t;
-
#endif /* CONFIG_MMU */
+typedef struct page *pgtable_t;
+
#include <asm/memory.h>
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h
index 2e5868b..386fcc1 100644
--- a/include/asm-arm/pgtable-nommu.h
+++ b/include/asm-arm/pgtable-nommu.h
@@ -16,7 +16,6 @@
#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/page.h>
-#include <asm/io.h>
/*
* Trivial page table functions.
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
index 800ba52..2b41ebb 100644
--- a/include/asm-arm/spinlock.h
+++ b/include/asm-arm/spinlock.h
@@ -142,7 +142,7 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
}
/* write_can_lock - would write_trylock() succeed? */
-#define __raw_write_can_lock(x) ((x)->lock == 0x80000000)
+#define __raw_write_can_lock(x) ((x)->lock == 0)
/*
* Read locks are a bit more hairy:
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index 6335de9..514af79 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -48,20 +48,6 @@
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
-#ifdef CONFIG_CPU_CP15
-#define read_cpuid(reg) \
- ({ \
- unsigned int __val; \
- asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
- : "=r" (__val) \
- : \
- : "cc"); \
- __val; \
- })
-#else
-#define read_cpuid(reg) (processor_id)
-#endif
-
/*
* This is used to ensure the compiler did actually allocate the register we
* asked it for some inline assembly sequences. Apparently we can't trust
@@ -78,6 +64,21 @@
#include <linux/stringify.h>
#include <linux/irqflags.h>
+#ifdef CONFIG_CPU_CP15
+#define read_cpuid(reg) \
+ ({ \
+ unsigned int __val; \
+ asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
+ : "=r" (__val) \
+ : \
+ : "cc"); \
+ __val; \
+ })
+#else
+extern unsigned int processor_id;
+#define read_cpuid(reg) (processor_id)
+#endif
+
/*
* The CPU ID never changes at run time, so we might as well tell the
* compiler that it's constant. Use this function to read the CPU ID
diff --git a/include/asm-arm/types.h b/include/asm-arm/types.h
index 3141451..345df01 100644
--- a/include/asm-arm/types.h
+++ b/include/asm-arm/types.h
@@ -1,29 +1,12 @@
#ifndef __ASM_ARM_TYPES_H
#define __ASM_ARM_TYPES_H
+#include <asm-generic/int-ll64.h>
+
#ifndef __ASSEMBLY__
typedef unsigned short umode_t;
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
#endif /* __ASSEMBLY__ */
/*
@@ -35,18 +18,6 @@ __extension__ typedef unsigned long long __u64;
#ifndef __ASSEMBLY__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
/* Dma addresses are 32-bits wide. */
typedef u32 dma_addr_t;
OpenPOWER on IntegriCloud