diff options
Diffstat (limited to 'include/asm-arm')
22 files changed, 245 insertions, 116 deletions
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h index 58f4093..a5a86b1 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200.h +++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h @@ -19,67 +19,80 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripheral */ -#define AT91_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91_ID_PIOD 5 /* Parallel IO Controller D */ -#define AT91_ID_US0 6 /* USART 0 */ -#define AT91_ID_US1 7 /* USART 1 */ -#define AT91_ID_US2 8 /* USART 2 */ -#define AT91_ID_US3 9 /* USART 3 */ -#define AT91_ID_MCI 10 /* Multimedia Card Interface */ -#define AT91_ID_UDP 11 /* USB Device Port */ -#define AT91_ID_TWI 12 /* Two-Wire Interface */ -#define AT91_ID_SPI 13 /* Serial Peripheral Interface */ -#define AT91_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT91_ID_TC0 17 /* Timer Counter 0 */ -#define AT91_ID_TC1 18 /* Timer Counter 1 */ -#define AT91_ID_TC2 19 /* Timer Counter 2 */ -#define AT91_ID_TC3 20 /* Timer Counter 3 */ -#define AT91_ID_TC4 21 /* Timer Counter 4 */ -#define AT91_ID_TC5 22 /* Timer Counter 5 */ -#define AT91_ID_UHP 23 /* USB Host port */ -#define AT91_ID_EMAC 24 /* Ethernet MAC */ -#define AT91_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ -#define AT91_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ -#define AT91_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ -#define AT91_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ -#define AT91_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripheral */ +#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */ +#define AT91RM9200_ID_US0 6 /* USART 0 */ +#define AT91RM9200_ID_US1 7 /* USART 1 */ +#define AT91RM9200_ID_US2 8 /* USART 2 */ +#define AT91RM9200_ID_US3 9 /* USART 3 */ +#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */ +#define AT91RM9200_ID_UDP 11 /* USB Device Port */ +#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */ +#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */ +#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */ +#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */ +#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */ +#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */ +#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */ +#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */ +#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */ +#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */ +#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */ +#define AT91RM9200_ID_UHP 23 /* USB Host port */ +#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */ +#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ +#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ +#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ +#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ +#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ /* * Peripheral physical base addresses. */ -#define AT91_BASE_TCB0 0xfffa0000 -#define AT91_BASE_TC0 0xfffa0000 -#define AT91_BASE_TC1 0xfffa0040 -#define AT91_BASE_TC2 0xfffa0080 -#define AT91_BASE_TCB1 0xfffa4000 -#define AT91_BASE_TC3 0xfffa4000 -#define AT91_BASE_TC4 0xfffa4040 -#define AT91_BASE_TC5 0xfffa4080 -#define AT91_BASE_UDP 0xfffb0000 -#define AT91_BASE_MCI 0xfffb4000 -#define AT91_BASE_TWI 0xfffb8000 -#define AT91_BASE_EMAC 0xfffbc000 -#define AT91_BASE_US0 0xfffc0000 -#define AT91_BASE_US1 0xfffc4000 -#define AT91_BASE_US2 0xfffc8000 -#define AT91_BASE_US3 0xfffcc000 -#define AT91_BASE_SSC0 0xfffd0000 -#define AT91_BASE_SSC1 0xfffd4000 -#define AT91_BASE_SSC2 0xfffd8000 -#define AT91_BASE_SPI 0xfffe0000 +#define AT91RM9200_BASE_TCB0 0xfffa0000 +#define AT91RM9200_BASE_TC0 0xfffa0000 +#define AT91RM9200_BASE_TC1 0xfffa0040 +#define AT91RM9200_BASE_TC2 0xfffa0080 +#define AT91RM9200_BASE_TCB1 0xfffa4000 +#define AT91RM9200_BASE_TC3 0xfffa4000 +#define AT91RM9200_BASE_TC4 0xfffa4040 +#define AT91RM9200_BASE_TC5 0xfffa4080 +#define AT91RM9200_BASE_UDP 0xfffb0000 +#define AT91RM9200_BASE_MCI 0xfffb4000 +#define AT91RM9200_BASE_TWI 0xfffb8000 +#define AT91RM9200_BASE_EMAC 0xfffbc000 +#define AT91RM9200_BASE_US0 0xfffc0000 +#define AT91RM9200_BASE_US1 0xfffc4000 +#define AT91RM9200_BASE_US2 0xfffc8000 +#define AT91RM9200_BASE_US3 0xfffcc000 +#define AT91RM9200_BASE_SSC0 0xfffd0000 +#define AT91RM9200_BASE_SSC1 0xfffd4000 +#define AT91RM9200_BASE_SSC2 0xfffd8000 +#define AT91RM9200_BASE_SPI 0xfffe0000 #define AT91_BASE_SYS 0xfffff000 /* + * Internal Memory. + */ +#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */ +#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ + +#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */ +#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ + +#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */ + + +#if 0 +/* * PIO pin definitions (peripheral A/B multiplexing). */ #define AT91_PA0_MISO (1 << 0) /* A: SPI Master-In Slave-Out */ @@ -257,5 +270,6 @@ #define AT91_PD25_TPK13 (1 << 25) /* B: ETM Trace Packet Port 13 */ #define AT91_PD26_TPK14 (1 << 26) /* B: ETM Trace Packet Port 14 */ #define AT91_PD27_TPK15 (1 << 27) /* B: ETM Trace Packet Port 15 */ +#endif #endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h index 0f4c12d..73693fe 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h @@ -80,6 +80,9 @@ #define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ #define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ +#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */ +#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */ +#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */ /* * PIO Controllers. diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h b/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h new file mode 100644 index 0000000..93547d7 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_twi.h @@ -0,0 +1,57 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_twi.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Two-wire Interface (TWI) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_TWI_H +#define AT91RM9200_TWI_H + +#define AT91_TWI_CR 0x00 /* Control Register */ +#define AT91_TWI_START (1 << 0) /* Send a Start Condition */ +#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */ +#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */ +#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */ +#define AT91_TWI_SWRST (1 << 7) /* Software Reset */ + +#define AT91_TWI_MMR 0x04 /* Master Mode Register */ +#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */ +#define AT91_TWI_IADRSZ_NO (0 << 8) +#define AT91_TWI_IADRSZ_1 (1 << 8) +#define AT91_TWI_IADRSZ_2 (2 << 8) +#define AT91_TWI_IADRSZ_3 (3 << 8) +#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */ +#define AT91_TWI_DADR (0x7f << 16) /* Device Address */ + +#define AT91_TWI_IADR 0x0c /* Internal Address Register */ + +#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */ +#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */ +#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */ +#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */ + +#define AT91_TWI_SR 0x20 /* Status Register */ +#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ +#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ +#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ +#define AT91_TWI_OVRE (1 << 6) /* Overrun Error */ +#define AT91_TWI_UNRE (1 << 7) /* Underrun Error */ +#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ + +#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ +#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */ +#define AT91_TWI_RHR 0x30 /* Receive Holding Register */ +#define AT91_TWI_THR 0x34 /* Transmit Holding Register */ + +#endif + diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h index dbde1ba..a011d27 100644 --- a/include/asm-arm/arch-at91rm9200/gpio.h +++ b/include/asm-arm/arch-at91rm9200/gpio.h @@ -17,10 +17,9 @@ #define PIN_BASE NR_AIC_IRQS -#define PQFP_GPIO_BANKS 3 /* PQFP package has 3 banks */ -#define BGA_GPIO_BANKS 4 /* BGA package has 4 banks */ +#define MAX_GPIO_BANKS 4 -/* these pin numbers double as IRQ numbers, like AT91_ID_* values */ +/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ #define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) #define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) @@ -180,17 +179,18 @@ #ifndef __ASSEMBLY__ /* setup setup routines, called from board init or driver probe() */ -extern int at91_set_A_periph(unsigned pin, int use_pullup); -extern int at91_set_B_periph(unsigned pin, int use_pullup); -extern int at91_set_gpio_input(unsigned pin, int use_pullup); -extern int at91_set_gpio_output(unsigned pin, int value); -extern int at91_set_deglitch(unsigned pin, int is_on); -extern int at91_set_multi_drive(unsigned pin, int is_on); +extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_gpio_output(unsigned pin, int value); +extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on); +extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on); /* callable at any time */ extern int at91_set_gpio_value(unsigned pin, int value); extern int at91_get_gpio_value(unsigned pin); +/* callable only from core power-management code */ extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); #endif diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 235d39d..6551b4d 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -34,27 +34,14 @@ * Virtual to Physical Address mapping for IO devices. */ #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) -#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91_BASE_SPI) -#define AT91_VA_BASE_SSC2 AT91_IO_P2V(AT91_BASE_SSC2) -#define AT91_VA_BASE_SSC1 AT91_IO_P2V(AT91_BASE_SSC1) -#define AT91_VA_BASE_SSC0 AT91_IO_P2V(AT91_BASE_SSC0) -#define AT91_VA_BASE_US3 AT91_IO_P2V(AT91_BASE_US3) -#define AT91_VA_BASE_US2 AT91_IO_P2V(AT91_BASE_US2) -#define AT91_VA_BASE_US1 AT91_IO_P2V(AT91_BASE_US1) -#define AT91_VA_BASE_US0 AT91_IO_P2V(AT91_BASE_US0) -#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91_BASE_EMAC) -#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91_BASE_TWI) -#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91_BASE_MCI) -#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91_BASE_UDP) -#define AT91_VA_BASE_TCB1 AT91_IO_P2V(AT91_BASE_TCB1) -#define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91_BASE_TCB0) - -/* Internal SRAM */ -#define AT91_SRAM_BASE 0x00200000 /* Internal SRAM base address */ -#define AT91_SRAM_SIZE 0x00004000 /* Internal SRAM SIZE (16Kb) */ +#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91RM9200_BASE_SPI) +#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC) +#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91RM9200_BASE_TWI) +#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91RM9200_BASE_MCI) +#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91RM9200_BASE_UDP) /* Internal SRAM is mapped below the IO devices */ -#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_SIZE) +#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE) /* Serial ports */ #define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */ @@ -71,9 +58,6 @@ /* Compact Flash */ #define AT91_CF_BASE 0x50000000 /* NCS4-NCS6: Compact Flash physical base address */ -/* Multi-Master Memory controller */ -#define AT91_UHP_BASE 0x00300000 /* USB Host controller */ - /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h index f63842c..763cb96 100644 --- a/include/asm-arm/arch-at91rm9200/irqs.h +++ b/include/asm-arm/arch-at91rm9200/irqs.h @@ -32,7 +32,7 @@ /* - * IRQ interrupt symbols are the AT91_ID_* symbols in at91rm9200.h + * IRQ interrupt symbols are the AT91xxx_ID_* symbols * for IRQs handled directly through the AIC, or else the AT91_PIN_* * symbols in gpio.h for ones handled indirectly as GPIOs. * We make provision for 4 banks of GPIO. diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h index 8c32297..593f562 100644 --- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h +++ b/include/asm-arm/arch-ep93xx/ep93xx-regs.h @@ -27,6 +27,7 @@ #define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000) #define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000) +#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000) #define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000) #define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000) diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h index d7a34ce..b4a8deb8 100644 --- a/include/asm-arm/arch-ep93xx/platform.h +++ b/include/asm-arm/arch-ep93xx/platform.h @@ -11,5 +11,11 @@ void ep93xx_init_devices(void); void ep93xx_clock_init(void); extern struct sys_timer ep93xx_timer; +struct ep93xx_eth_data +{ + unsigned char dev_addr[6]; + unsigned char phy_id; +}; + #endif diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index 13aee17..8d10a91 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -90,6 +90,11 @@ struct ixp4xx_i2c_pins { struct sys_timer; /* + * Frequency of clock used for primary clocksource + */ +extern unsigned long ixp4xx_timer_freq; + +/* * Functions used by platform-level setup code */ extern void ixp4xx_map_io(void); diff --git a/include/asm-arm/arch-omap/board-ams-delta.h b/include/asm-arm/arch-omap/board-ams-delta.h index 0070f6d..9aee15d 100644 --- a/include/asm-arm/arch-omap/board-ams-delta.h +++ b/include/asm-arm/arch-omap/board-ams-delta.h @@ -50,9 +50,20 @@ #define AMS_DELTA_LATCH2_NAND_NWE 0x0020 #define AMS_DELTA_LATCH2_NAND_ALE 0x0040 #define AMS_DELTA_LATCH2_NAND_CLE 0x0080 +#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 +#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 +#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 +#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 #define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 #define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 +#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 +#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1 +#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2 +#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4 +#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6 +#define AMS_DELTA_GPIO_PIN_SCARD_IO 7 +#define AMS_DELTA_GPIO_PIN_CONFIG 11 #define AMS_DELTA_GPIO_PIN_NAND_RB 12 #ifndef __ASSEMBLY__ diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h index f83003f..fa68810 100644 --- a/include/asm-arm/arch-omap/clock.h +++ b/include/asm-arm/arch-omap/clock.h @@ -45,6 +45,7 @@ struct clk_functions { struct clk * (*clk_get_parent)(struct clk *clk); void (*clk_allow_idle)(struct clk *clk); void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); }; extern unsigned int mpurate; diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index 1b1b023..d591d05 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -331,6 +331,12 @@ enum omap_dma_color_mode { OMAP_DMA_TRANSPARENT_COPY }; +enum omap_dma_write_mode { + OMAP_DMA_WRITE_NON_POSTED = 0, + OMAP_DMA_WRITE_POSTED, + OMAP_DMA_WRITE_LAST_NON_POSTED +}; + struct omap_dma_channel_params { int data_type; /* data type 8,16,32 */ int elem_count; /* number of elements in a frame */ @@ -338,13 +344,13 @@ struct omap_dma_channel_params { int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ int src_amode; /* constant , post increment, indexed , double indexed */ - int src_start; /* source address : physical */ + unsigned long src_start; /* source address : physical */ int src_ei; /* source element index */ int src_fi; /* source frame index */ int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ int dst_amode; /* constant , post increment, indexed , double indexed */ - int dst_start; /* source address : physical */ + unsigned long dst_start; /* source address : physical */ int dst_ei; /* source element index */ int dst_fi; /* source frame index */ @@ -356,7 +362,7 @@ struct omap_dma_channel_params { }; -extern void omap_set_dma_priority(int dst_port, int priority); +extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, void (* callback)(int lch, u16 ch_status, void *data), void *data, int *dma_ch); @@ -371,6 +377,7 @@ extern void omap_set_dma_transfer_params(int lch, int data_type, int dma_trigger, int src_or_dst_synch); extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color); +extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, unsigned long src_start, @@ -394,6 +401,9 @@ extern void omap_set_dma_params(int lch, extern void omap_dma_link_lch (int lch_head, int lch_queue); extern void omap_dma_unlink_lch (int lch_head, int lch_queue); +extern int omap_set_dma_callback(int lch, + void (* callback)(int lch, u16 ch_status, void *data), + void *data); extern dma_addr_t omap_get_dma_src_pos(int lch); extern dma_addr_t omap_get_dma_dst_pos(int lch); extern int omap_get_dma_src_addr_counter(int lch); diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h index 7a289ff..b5f3a71 100644 --- a/include/asm-arm/arch-omap/dmtimer.h +++ b/include/asm-arm/arch-omap/dmtimer.h @@ -52,6 +52,8 @@ int omap_dm_timer_init(void); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); void omap_dm_timer_free(struct omap_dm_timer *timer); +void omap_dm_timer_enable(struct omap_dm_timer *timer); +void omap_dm_timer_disable(struct omap_dm_timer *timer); int omap_dm_timer_get_irq(struct omap_dm_timer *timer); diff --git a/include/asm-arm/arch-omap/gpmc.h b/include/asm-arm/arch-omap/gpmc.h index 1a0a520..7c03ef6 100644 --- a/include/asm-arm/arch-omap/gpmc.h +++ b/include/asm-arm/arch-omap/gpmc.h @@ -85,7 +85,7 @@ extern void gpmc_cs_write_reg(int cs, int idx, u32 val); extern u32 gpmc_cs_read_reg(int cs, int idx); extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); -extern unsigned long gpmc_cs_get_base_addr(int cs); - +extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); +extern void gpmc_cs_free(int cs); #endif diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 2542495..c5bb05a 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -237,6 +237,7 @@ #define INT_24XX_SDMA_IRQ1 13 #define INT_24XX_SDMA_IRQ2 14 #define INT_24XX_SDMA_IRQ3 15 +#define INT_24XX_CAM_IRQ 24 #define INT_24XX_DSS_IRQ 25 #define INT_24XX_GPIO_BANK1 29 #define INT_24XX_GPIO_BANK2 30 @@ -261,6 +262,7 @@ #define INT_24XX_UART1_IRQ 72 #define INT_24XX_UART2_IRQ 73 #define INT_24XX_UART3_IRQ 74 +#define INT_24XX_MMC_IRQ 83 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and * 16 MPUIO lines */ diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h index 679869c..828cc5c 100644 --- a/include/asm-arm/arch-omap/mux.h +++ b/include/asm-arm/arch-omap/mux.h @@ -320,6 +320,17 @@ enum omap1xxx_index { P15_1610_UWIRE_CS3, N15_1610_UWIRE_CS1, + /* OMAP-1610 SPI */ + U19_1610_SPIF_SCK, + U18_1610_SPIF_DIN, + P20_1610_SPIF_DIN, + W21_1610_SPIF_DOUT, + R18_1610_SPIF_DOUT, + N14_1610_SPIF_CS0, + N15_1610_SPIF_CS1, + T19_1610_SPIF_CS2, + P15_1610_SPIF_CS3, + /* OMAP-1610 Flash */ L3_1610_FLASH_CS2B_OE, M8_1610_FLASH_CS2B_WE, @@ -461,6 +472,20 @@ enum omap24xx_index { K15_24XX_UART3_TX, K14_24XX_UART3_RX, + /* MMC/SDIO */ + G19_24XX_MMC_CLKO, + H18_24XX_MMC_CMD, + F20_24XX_MMC_DAT0, + H14_24XX_MMC_DAT1, + E19_24XX_MMC_DAT2, + D19_24XX_MMC_DAT3, + F19_24XX_MMC_DAT_DIR0, + E20_24XX_MMC_DAT_DIR1, + F18_24XX_MMC_DAT_DIR2, + E18_24XX_MMC_DAT_DIR3, + G18_24XX_MMC_CMD_DIR, + H15_24XX_MMC_CLKI, + /* Keypad GPIO*/ T19_24XX_KBR0, R19_24XX_KBR1, diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h index ae7baa6..17f0c65 100644 --- a/include/asm-arm/elf.h +++ b/include/asm-arm/elf.h @@ -8,9 +8,6 @@ #include <asm/ptrace.h> #include <asm/user.h> -#ifdef __KERNEL -#include <asm/procinfo.h> -#endif typedef unsigned long elf_greg_t; typedef unsigned long elf_freg_t[3]; @@ -32,11 +29,6 @@ typedef elf_greg_t elf_gregset_t[ELF_NGREG]; typedef struct user_fp elf_fpregset_t; /* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ( ((x)->e_machine == EM_ARM) && (ELF_PROC_OK((x))) ) - -/* * These are used to set parameters in the core dumps. */ #define ELF_CLASS ELFCLASS32 @@ -47,6 +39,14 @@ typedef struct user_fp elf_fpregset_t; #endif #define ELF_ARCH EM_ARM +#ifdef __KERNEL__ +#include <asm/procinfo.h> + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ( ((x)->e_machine == EM_ARM) && (ELF_PROC_OK((x))) ) + #define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 @@ -83,8 +83,6 @@ typedef struct user_fp elf_fpregset_t; extern char elf_platform[]; #define ELF_PLATFORM (elf_platform) -#ifdef __KERNEL__ - /* * 32-bit code is always OK. Some cpus can do 26-bit, some can't. */ diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h index 22dfb17..adab777 100644 --- a/include/asm-arm/hardware/locomo.h +++ b/include/asm-arm/hardware/locomo.h @@ -54,17 +54,18 @@ #define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */ /* SPI interface */ -#define LOCOMO_SPIMD 0x60 /* SPI mode setting */ -#define LOCOMO_SPICT 0x64 /* SPI mode control */ -#define LOCOMO_SPIST 0x68 /* SPI status */ -#define LOCOMO_SPIIS 0x70 /* SPI interrupt status */ -#define LOCOMO_SPIWE 0x74 /* SPI interrupt status write enable */ -#define LOCOMO_SPIIE 0x78 /* SPI interrupt enable */ -#define LOCOMO_SPIIR 0x7c /* SPI interrupt request */ -#define LOCOMO_SPITD 0x80 /* SPI transfer data write */ -#define LOCOMO_SPIRD 0x84 /* SPI receive data read */ -#define LOCOMO_SPITS 0x88 /* SPI transfer data shift */ -#define LOCOMO_SPIRS 0x8C /* SPI receive data shift */ +#define LOCOMO_SPI 0x60 +#define LOCOMO_SPIMD 0x00 /* SPI mode setting */ +#define LOCOMO_SPICT 0x04 /* SPI mode control */ +#define LOCOMO_SPIST 0x08 /* SPI status */ +#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */ +#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */ +#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */ +#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */ +#define LOCOMO_SPITD 0x20 /* SPI transfer data write */ +#define LOCOMO_SPIRD 0x24 /* SPI receive data read */ +#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */ +#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */ #define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ #define LOCOMO_SPI_OVRN (1 << 2) /* Over Run bit */ #define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ @@ -161,6 +162,7 @@ extern struct bus_type locomo_bus_type; #define LOCOMO_DEVID_AUDIO 3 #define LOCOMO_DEVID_LED 4 #define LOCOMO_DEVID_UART 5 +#define LOCOMO_DEVID_SPI 6 struct locomo_dev { struct device dev; @@ -197,10 +199,11 @@ int locomo_driver_register(struct locomo_driver *); void locomo_driver_unregister(struct locomo_driver *); /* GPIO control functions */ -void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir); -unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits); -unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits); -void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set); +void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir); +int locomo_gpio_read_level(struct device *dev, unsigned int bits); +int locomo_gpio_read_output(struct device *dev, unsigned int bits); +void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set); + /* M62332 control function */ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/include/asm-arm/hardware/sharpsl_pm.h index ecf15b8..a836e76 100644 --- a/include/asm-arm/hardware/sharpsl_pm.h +++ b/include/asm-arm/hardware/sharpsl_pm.h @@ -25,6 +25,7 @@ struct sharpsl_charger_machinfo { void (*measure_temp)(int); void (*presuspend)(void); void (*postsuspend)(void); + void (*earlyresume)(void); unsigned long (*read_devdata)(int); #define SHARPSL_BATT_VOLT 1 #define SHARPSL_BATT_TEMP 2 diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h index dee0bc3..1eb93f5 100644 --- a/include/asm-arm/mach/time.h +++ b/include/asm-arm/mach/time.h @@ -38,7 +38,9 @@ struct sys_timer { void (*init)(void); void (*suspend)(void); void (*resume)(void); +#ifndef CONFIG_GENERIC_TIME unsigned long (*offset)(void); +#endif #ifdef CONFIG_NO_IDLE_HZ struct dyn_tick_timer *dyn_tick; diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h index af9c3fe..7e85db7 100644 --- a/include/asm-arm/page.h +++ b/include/asm-arm/page.h @@ -11,13 +11,13 @@ #define _ASMARM_PAGE_H +#ifdef __KERNEL__ + /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 #define PAGE_SIZE (1UL << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) -#ifdef __KERNEL__ - /* to align the pointer to the (next) page boundary */ #define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) diff --git a/include/asm-arm/timeofday.h b/include/asm-arm/timeofday.h new file mode 100644 index 0000000..27254bd --- /dev/null +++ b/include/asm-arm/timeofday.h @@ -0,0 +1,4 @@ +#ifndef _ASM_ARM_TIMEOFDAY_H +#define _ASM_ARM_TIMEOFDAY_H +#include <asm-generic/timeofday.h> +#endif |
