diff options
Diffstat (limited to 'include/asm-arm')
51 files changed, 1656 insertions, 199 deletions
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h b/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h new file mode 100644 index 0000000..bff5ea4 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h @@ -0,0 +1,81 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_spi.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Serial Peripheral Interface (SPI) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_SPI_H +#define AT91RM9200_SPI_H + +#define AT91_SPI_CR 0x00 /* Control Register */ +#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ +#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ +#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ +#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ + +#define AT91_SPI_MR 0x04 /* Mode Register */ +#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ +#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ +#define AT91_SPI_PS_FIXED (0 << 1) +#define AT91_SPI_PS_VARIABLE (1 << 1) +#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ +#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection */ +#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ +#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ +#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ + +#define AT91_SPI_RDR 0x08 /* Receive Data Register */ +#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ + +#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ +#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ +#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ + +#define AT91_SPI_SR 0x10 /* Status Register */ +#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ +#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ +#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ +#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ +#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ +#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ +#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ +#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ +#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ +#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ +#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ + +#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ +#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ +#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ + +#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */ +#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ +#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ +#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ +#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ +#define AT91_SPI_BITS_8 (0 << 4) +#define AT91_SPI_BITS_9 (1 << 4) +#define AT91_SPI_BITS_10 (2 << 4) +#define AT91_SPI_BITS_11 (3 << 4) +#define AT91_SPI_BITS_12 (4 << 4) +#define AT91_SPI_BITS_13 (5 << 4) +#define AT91_SPI_BITS_14 (6 << 4) +#define AT91_SPI_BITS_15 (7 << 4) +#define AT91_SPI_BITS_16 (8 << 4) +#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ +#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ +#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h new file mode 100644 index 0000000..ac88022 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h @@ -0,0 +1,96 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h + * + * Copyright (C) SAN People + * + * Serial Synchronous Controller (SSC) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_SSC_H +#define AT91RM9200_SSC_H + +#define AT91_SSC_CR 0x00 /* Control Register */ +#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */ +#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */ +#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */ +#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */ +#define AT91_SSC_SWRST (1 << 15) /* Software Reset */ + +#define AT91_SSC_CMR 0x04 /* Clock Mode Register */ +#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */ + +#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */ +#define AT91_SSC_CKS (3 << 0) /* Clock Selection */ +#define AT91_SSC_CKS_DIV (0 << 0) +#define AT91_SSC_CKS_CLOCK (1 << 0) +#define AT91_SSC_CKS_PIN (2 << 0) +#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */ +#define AT91_SSC_CKO_NONE (0 << 2) +#define AT91_SSC_CKO_CONTINUOUS (1 << 2) +#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */ +#define AT91_SSC_CKI_FALLING (0 << 5) +#define AT91_SSC_CK_RISING (1 << 5) +#define AT91_SSC_START (0xf << 8) /* Start Selection */ +#define AT91_SSC_START_CONTINUOUS (0 << 8) +#define AT91_SSC_START_TX_RX (1 << 8) +#define AT91_SSC_START_LOW_RF (2 << 8) +#define AT91_SSC_START_HIGH_RF (3 << 8) +#define AT91_SSC_START_FALLING_RF (4 << 8) +#define AT91_SSC_START_RISING_RF (5 << 8) +#define AT91_SSC_START_LEVEL_RF (6 << 8) +#define AT91_SSC_START_EDGE_RF (7 << 8) +#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */ +#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */ + +#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */ +#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */ +#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */ +#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */ +#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */ +#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */ +#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */ +#define AT91_SSC_FSOS_NONE (0 << 20) +#define AT91_SSC_FSOS_NEGATIVE (1 << 20) +#define AT91_SSC_FSOS_POSITIVE (2 << 20) +#define AT91_SSC_FSOS_LOW (3 << 20) +#define AT91_SSC_FSOS_HIGH (4 << 20) +#define AT91_SSC_FSOS_TOGGLE (5 << 20) +#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */ +#define AT91_SSC_FSEDGE_POSITIVE (0 << 24) +#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24) + +#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */ +#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */ +#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */ +#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */ + +#define AT91_SSC_RHR 0x20 /* Receive Holding Register */ +#define AT91_SSC_THR 0x24 /* Transmit Holding Register */ +#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */ +#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */ + +#define AT91_SSC_SR 0x40 /* Status Register */ +#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */ +#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */ +#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */ +#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */ +#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */ +#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */ +#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */ +#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */ +#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */ +#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */ +#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */ +#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */ + +#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */ +#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */ +#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h index 2910d35..0f4c12d 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h @@ -68,8 +68,17 @@ #define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */ #define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */ #define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */ + #define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */ #define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */ +#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */ +#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */ +#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */ +#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */ +#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */ +#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */ +#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ +#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ /* @@ -241,7 +250,7 @@ #define AT91_RTC_SEC (0x7f << 0) /* Current Second */ #define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ #define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ -#define At91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ +#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ #define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ #define AT91_RTC_CENT (0x7f << 0) /* Current Century */ diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h new file mode 100644 index 0000000..f4da752 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h @@ -0,0 +1,146 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_tc.h + * + * Copyright (C) SAN People + * + * Timer/Counter Unit (TC) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_TC_H +#define AT91RM9200_TC_H + +#define AT91_TC_BCR 0xc0 /* TC Block Control Register */ +#define AT91_TC_SYNC (1 << 0) /* Synchro Command */ + +#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */ +#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */ +#define AT91_TC_TC0XC0S_TCLK0 (0 << 0) +#define AT91_TC_TC0XC0S_NONE (1 << 0) +#define AT91_TC_TC0XC0S_TIOA1 (2 << 0) +#define AT91_TC_TC0XC0S_TIOA2 (3 << 0) +#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */ +#define AT91_TC_TC1XC1S_TCLK1 (0 << 2) +#define AT91_TC_TC1XC1S_NONE (1 << 2) +#define AT91_TC_TC1XC1S_TIOA0 (2 << 2) +#define AT91_TC_TC1XC1S_TIOA2 (3 << 2) +#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */ +#define AT91_TC_TC2XC2S_TCLK2 (0 << 4) +#define AT91_TC_TC2XC2S_NONE (1 << 4) +#define AT91_TC_TC2XC2S_TIOA0 (2 << 4) +#define AT91_TC_TC2XC2S_TIOA1 (3 << 4) + + +#define AT91_TC_CCR 0x00 /* Channel Control Register */ +#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */ +#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */ +#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */ + +#define AT91_TC_CMR 0x04 /* Channel Mode Register */ +#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */ +#define AT91_TC_TIMER_CLOCK1 (0 << 0) +#define AT91_TC_TIMER_CLOCK2 (1 << 0) +#define AT91_TC_TIMER_CLOCK3 (2 << 0) +#define AT91_TC_TIMER_CLOCK4 (3 << 0) +#define AT91_TC_TIMER_CLOCK5 (4 << 0) +#define AT91_TC_XC0 (5 << 0) +#define AT91_TC_XC1 (6 << 0) +#define AT91_TC_XC2 (7 << 0) +#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */ +#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */ +#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */ +#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */ +#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */ +#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */ +#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */ +#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */ +#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */ +#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */ + +#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */ +#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */ +#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */ +#define AT91_TC_EEVTEDG_NONE (0 << 8) +#define AT91_TC_EEVTEDG_RISING (1 << 8) +#define AT91_TC_EEVTEDG_FALLING (2 << 8) +#define AT91_TC_EEVTEDG_BOTH (3 << 8) +#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */ +#define AT91_TC_EEVT_TIOB (0 << 10) +#define AT91_TC_EEVT_XC0 (1 << 10) +#define AT91_TC_EEVT_XC1 (2 << 10) +#define AT91_TC_EEVT_XC2 (3 << 10) +#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */ +#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */ +#define AT91_TC_WAVESEL_UP (0 << 13) +#define AT91_TC_WAVESEL_UP_AUTO (2 << 13) +#define AT91_TC_WAVESEL_UPDOWN (1 << 13) +#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13) +#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */ +#define AT91_TC_ACPA_NONE (0 << 16) +#define AT91_TC_ACPA_SET (1 << 16) +#define AT91_TC_ACPA_CLEAR (2 << 16) +#define AT91_TC_ACPA_TOGGLE (3 << 16) +#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */ +#define AT91_TC_ACPC_NONE (0 << 18) +#define AT91_TC_ACPC_SET (1 << 18) +#define AT91_TC_ACPC_CLEAR (2 << 18) +#define AT91_TC_ACPC_TOGGLE (3 << 18) +#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */ +#define AT91_TC_AEEVT_NONE (0 << 20) +#define AT91_TC_AEEVT_SET (1 << 20) +#define AT91_TC_AEEVT_CLEAR (2 << 20) +#define AT91_TC_AEEVT_TOGGLE (3 << 20) +#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */ +#define AT91_TC_ASWTRG_NONE (0 << 22) +#define AT91_TC_ASWTRG_SET (1 << 22) +#define AT91_TC_ASWTRG_CLEAR (2 << 22) +#define AT91_TC_ASWTRG_TOGGLE (3 << 22) +#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */ +#define AT91_TC_BCPB_NONE (0 << 24) +#define AT91_TC_BCPB_SET (1 << 24) +#define AT91_TC_BCPB_CLEAR (2 << 24) +#define AT91_TC_BCPB_TOGGLE (3 << 24) +#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */ +#define AT91_TC_BCPC_NONE (0 << 26) +#define AT91_TC_BCPC_SET (1 << 26) +#define AT91_TC_BCPC_CLEAR (2 << 26) +#define AT91_TC_BCPC_TOGGLE (3 << 26) +#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */ +#define AT91_TC_BEEVT_NONE (0 << 28) +#define AT91_TC_BEEVT_SET (1 << 28) +#define AT91_TC_BEEVT_CLEAR (2 << 28) +#define AT91_TC_BEEVT_TOGGLE (3 << 28) +#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */ +#define AT91_TC_BSWTRG_NONE (0 << 30) +#define AT91_TC_BSWTRG_SET (1 << 30) +#define AT91_TC_BSWTRG_CLEAR (2 << 30) +#define AT91_TC_BSWTRG_TOGGLE (3 << 30) + +#define AT91_TC_CV 0x10 /* Counter Value */ +#define AT91_TC_RA 0x14 /* Register A */ +#define AT91_TC_RB 0x18 /* Register B */ +#define AT91_TC_RC 0x1c /* Register C */ + +#define AT91_TC_SR 0x20 /* Status Register */ +#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */ +#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */ +#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */ +#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */ +#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */ +#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */ +#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */ +#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */ +#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */ +#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */ +#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */ + +#define AT91_TC_IER 0x24 /* Interrupt Enable Register */ +#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h new file mode 100644 index 0000000..951e3f6 --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h @@ -0,0 +1,77 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_udp.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * USB Device Port (UDP) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_UDP_H +#define AT91RM9200_UDP_H + +#define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */ +#define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */ +#define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */ +#define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */ + +#define AT91_UDP_GLB_STAT 0x04 /* Global State Register */ +#define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */ +#define AT91_UDP_CONFG (1 << 1) /* Configured */ +#define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */ +#define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */ +#define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */ + +#define AT91_UDP_FADDR 0x08 /* Function Address Register */ +#define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */ +#define AT91_UDP_FEN (1 << 8) /* Function Enable */ + +#define AT91_UDP_IER 0x10 /* Interrupt Enable Register */ +#define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */ +#define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */ + +#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */ +#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */ +#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */ +#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */ +#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */ +#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */ +#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */ +#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */ + +#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */ +#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */ + +#define AT91_UDP_CSR(n) (0x30 + ((n) * 4)) /* Endpoint Control/Status Registers 0-7 */ +#define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */ +#define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */ +#define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */ +#define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */ +#define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */ +#define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */ +#define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */ +#define AT91_UDP_DIR (1 << 7) /* Transfer Direction */ +#define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */ +#define AT91_UDP_EPTYPE_CTRL (0 << 8) +#define AT91_UDP_EPTYPE_ISO_OUT (1 << 8) +#define AT91_UDP_EPTYPE_BULK_OUT (2 << 8) +#define AT91_UDP_EPTYPE_INT_OUT (3 << 8) +#define AT91_UDP_EPTYPE_ISO_IN (5 << 8) +#define AT91_UDP_EPTYPE_BULK_IN (6 << 8) +#define AT91_UDP_EPTYPE_INT_IN (7 << 8) +#define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */ +#define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */ +#define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */ + +#define AT91_UDP_FDR(n) (0x50 + ((n) * 4)) /* Endpoint FIFO Data Registers 0-7 */ + +#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */ +#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h index 4fdef13..1fdd70b2 100644 --- a/include/asm-arm/arch-at91rm9200/board.h +++ b/include/asm-arm/arch-at91rm9200/board.h @@ -31,14 +31,9 @@ #ifndef __ASM_ARCH_BOARD_H #define __ASM_ARCH_BOARD_H - /* Clocks */ -extern unsigned long at91_master_clock; - - /* Serial Port */ -extern int at91_serial_map[AT91_NR_UART]; -extern int at91_console_port; - #include <linux/mtd/partitions.h> +#include <linux/device.h> +#include <linux/spi/spi.h> /* USB Device */ struct at91_udc_data { @@ -91,10 +86,25 @@ struct at91_nand_data { extern void __init at91_add_device_nand(struct at91_nand_data *data); /* I2C*/ -void __init at91_add_device_i2c(void); +extern void __init at91_add_device_i2c(void); + + /* SPI */ +extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); - /* RTC */ -void __init at91_add_device_rtc(void); + /* Serial */ +struct at91_uart_config { + unsigned short console_tty; /* tty number of serial console */ + unsigned short nr_tty; /* number of serial tty's */ + short tty_map[]; /* map UART to tty number */ +}; +extern struct platform_device *at91_default_console_device; +extern void __init at91_init_serial(struct at91_uart_config *config); + +struct at91_uart_data { + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ +}; +extern void __init at91_add_device_serial(void); /* LEDs */ extern u8 at91_leds_cpu; diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h index 6176ab2..dbde1ba 100644 --- a/include/asm-arm/arch-at91rm9200/gpio.h +++ b/include/asm-arm/arch-at91rm9200/gpio.h @@ -13,6 +13,8 @@ #ifndef __ASM_ARCH_AT91RM9200_GPIO_H #define __ASM_ARCH_AT91RM9200_GPIO_H +#include <asm/irq.h> + #define PIN_BASE NR_AIC_IRQS #define PQFP_GPIO_BANKS 3 /* PQFP package has 3 banks */ @@ -188,6 +190,9 @@ extern int at91_set_multi_drive(unsigned pin, int is_on); /* callable at any time */ extern int at91_set_gpio_value(unsigned pin, int value); extern int at91_get_gpio_value(unsigned pin); + +extern void at91_gpio_suspend(void); +extern void at91_gpio_resume(void); #endif #endif diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 59e6f44..235d39d 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -50,9 +50,12 @@ #define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91_BASE_TCB0) /* Internal SRAM */ -#define AT91_BASE_SRAM 0x00200000 /* Internal SRAM base address */ +#define AT91_SRAM_BASE 0x00200000 /* Internal SRAM base address */ #define AT91_SRAM_SIZE 0x00004000 /* Internal SRAM SIZE (16Kb) */ + /* Internal SRAM is mapped below the IO devices */ +#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_SIZE) + /* Serial ports */ #define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */ @@ -81,14 +84,14 @@ static inline unsigned int at91_sys_read(unsigned int reg_offset) { void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - return readl(addr + reg_offset); + return __raw_readl(addr + reg_offset); } static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) { void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - writel(value, addr + reg_offset); + __raw_writel(value, addr + reg_offset); } #endif diff --git a/include/asm-arm/arch-at91rm9200/io.h b/include/asm-arm/arch-at91rm9200/io.h index 23e670d..88fd1be 100644 --- a/include/asm-arm/arch-at91rm9200/io.h +++ b/include/asm-arm/arch-at91rm9200/io.h @@ -21,7 +21,6 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H -#include <asm/arch/at91rm9200.h> #include <asm/io.h> #define IO_SPACE_LIMIT 0xFFFFFFFF diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h index 27b0497..2dc93b1 100644 --- a/include/asm-arm/arch-at91rm9200/irqs.h +++ b/include/asm-arm/arch-at91rm9200/irqs.h @@ -37,8 +37,6 @@ * symbols in gpio.h for ones handled indirectly as GPIOs. * We make provision for 4 banks of GPIO. */ -#include <asm/arch/gpio.h> - #define NR_IRQS (NR_AIC_IRQS + (4 * 32)) diff --git a/include/asm-arm/arch-at91rm9200/memory.h b/include/asm-arm/arch-at91rm9200/memory.h index 462f1f0..3c327c4 100644 --- a/include/asm-arm/arch-at91rm9200/memory.h +++ b/include/asm-arm/arch-at91rm9200/memory.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include <asm/arch/hardware.h> +#include <asm/hardware.h> #define PHYS_OFFSET (AT91_SDRAM_BASE) diff --git a/include/asm-arm/arch-at91rm9200/pio.h b/include/asm-arm/arch-at91rm9200/pio.h deleted file mode 100644 index a89501b..0000000 --- a/include/asm-arm/arch-at91rm9200/pio.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/pio.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_PIO_H -#define __ASM_ARCH_PIO_H - -#include <asm/arch/hardware.h> - -static inline void AT91_CfgPIO_USART0(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA17_TXD0 | AT91_PA18_RXD0 | AT91_PA20_CTS0); - - /* - * Errata #39 - RTS0 is not internally connected to PA21. We need to drive - * the pin manually. Default is off (RTS is active low). - */ - at91_sys_write(AT91_PIOA + PIO_PER, AT91_PA21_RTS0); - at91_sys_write(AT91_PIOA + PIO_OER, AT91_PA21_RTS0); - at91_sys_write(AT91_PIOA + PIO_SODR, AT91_PA21_RTS0); -} - -static inline void AT91_CfgPIO_USART1(void) { - at91_sys_write(AT91_PIOB + PIO_PDR, AT91_PB18_RI1 | AT91_PB19_DTR1 - | AT91_PB20_TXD1 | AT91_PB21_RXD1 | AT91_PB23_DCD1 - | AT91_PB24_CTS1 | AT91_PB25_DSR1 | AT91_PB26_RTS1); -} - -static inline void AT91_CfgPIO_USART2(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA22_RXD2 | AT91_PA23_TXD2); -} - -static inline void AT91_CfgPIO_USART3(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA5_TXD3 | AT91_PA6_RXD3); - at91_sys_write(AT91_PIOA + PIO_BSR, AT91_PA5_TXD3 | AT91_PA6_RXD3); -} - -static inline void AT91_CfgPIO_DBGU(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA31_DTXD | AT91_PA30_DRXD); -} - -/* - * Enable the Two-Wire interface. - */ -static inline void AT91_CfgPIO_TWI(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA25_TWD | AT91_PA26_TWCK); - at91_sys_write(AT91_PIOA + PIO_ASR, AT91_PA25_TWD | AT91_PA26_TWCK); - at91_sys_write(AT91_PIOA + PIO_MDER, AT91_PA25_TWD | AT91_PA26_TWCK); /* open drain */ -} - -/* - * Enable the Serial Peripheral Interface. - */ -static inline void AT91_CfgPIO_SPI(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA0_MISO | AT91_PA1_MOSI | AT91_PA2_SPCK); -} - -static inline void AT91_CfgPIO_SPI_CS0(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA3_NPCS0); -} - -static inline void AT91_CfgPIO_SPI_CS1(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA4_NPCS1); -} - -static inline void AT91_CfgPIO_SPI_CS2(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA5_NPCS2); -} - -static inline void AT91_CfgPIO_SPI_CS3(void) { - at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA6_NPCS3); -} - -/* - * Select the DataFlash card. - */ -static inline void AT91_CfgPIO_DataFlashCard(void) { - at91_sys_write(AT91_PIOB + PIO_PER, AT91_PIO_P(7)); - at91_sys_write(AT91_PIOB + PIO_OER, AT91_PIO_P(7)); - at91_sys_write(AT91_PIOB + PIO_CODR, AT91_PIO_P(7)); -} - -/* - * Enable NAND Flash (SmartMedia) interface. - */ -static inline void AT91_CfgPIO_SmartMedia(void) { - /* enable PC0=SMCE, PC1=SMOE, PC3=SMWE, A21=CLE, A22=ALE */ - at91_sys_write(AT91_PIOC + PIO_ASR, AT91_PC0_BFCK | AT91_PC1_BFRDY_SMOE | AT91_PC3_BFBAA_SMWE); - at91_sys_write(AT91_PIOC + PIO_PDR, AT91_PC0_BFCK | AT91_PC1_BFRDY_SMOE | AT91_PC3_BFBAA_SMWE); - - /* Configure PC2 as input (signal READY of the SmartMedia) */ - at91_sys_write(AT91_PIOC + PIO_PER, AT91_PC2_BFAVD); /* enable direct output enable */ - at91_sys_write(AT91_PIOC + PIO_ODR, AT91_PC2_BFAVD); /* disable output */ - - /* Configure PB1 as input (signal Card Detect of the SmartMedia) */ - at91_sys_write(AT91_PIOB + PIO_PER, AT91_PIO_P(1)); /* enable direct output enable */ - at91_sys_write(AT91_PIOB + PIO_ODR, AT91_PIO_P(1)); /* disable output */ -} - -static inline int AT91_PIO_SmartMedia_RDY(void) { - return (at91_sys_read(AT91_PIOC + PIO_PDSR) & AT91_PIO_P(2)) ? 1 : 0; -} - -static inline int AT91_PIO_SmartMedia_CardDetect(void) { - return (at91_sys_read(AT91_PIOB + PIO_PDSR) & AT91_PIO_P(1)) ? 1 : 0; -} - -#endif diff --git a/include/asm-arm/arch-at91rm9200/system.h b/include/asm-arm/arch-at91rm9200/system.h index 29c4265..8a2ff47 100644 --- a/include/asm-arm/arch-at91rm9200/system.h +++ b/include/asm-arm/arch-at91rm9200/system.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <asm/arch/hardware.h> +#include <asm/hardware.h> static inline void arch_idle(void) { @@ -48,4 +48,12 @@ static inline void arch_reset(char mode) at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } +#define ARCH_ID_AT91RM9200 0x09200080 +#define ARCH_ID_AT91SAM9261 0x019000a0 + +static inline unsigned long arch_identify(void) +{ + return at91_sys_read(AT91_DBGU_CIDR) & (AT91_CIDR_EPROC | AT91_CIDR_ARCH); +} + #endif diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91rm9200/timex.h index 3f112dd..88687ce 100644 --- a/include/asm-arm/arch-at91rm9200/timex.h +++ b/include/asm-arm/arch-at91rm9200/timex.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -#include <asm/arch/hardware.h> +#include <asm/hardware.h> #define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h index 7b38497..ec7811a 100644 --- a/include/asm-arm/arch-at91rm9200/uncompress.h +++ b/include/asm-arm/arch-at91rm9200/uncompress.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -#include <asm/arch/hardware.h> +#include <asm/hardware.h> /* * The following code assumes the serial port has already been diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91rm9200/vmalloc.h index 34d9718..4c367eb 100644 --- a/include/asm-arm/arch-at91rm9200/vmalloc.h +++ b/include/asm-arm/arch-at91rm9200/vmalloc.h @@ -21,6 +21,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END (AT91_IO_VIRT_BASE & PGDIR_MASK) +#define VMALLOC_END (AT91_SRAM_VIRT_BASE & PGDIR_MASK) #endif diff --git a/include/asm-arm/arch-imx/imx-dma.h b/include/asm-arm/arch-imx/imx-dma.h index f2063c1..599f03e 100644 --- a/include/asm-arm/arch-imx/imx-dma.h +++ b/include/asm-arm/arch-imx/imx-dma.h @@ -46,7 +46,7 @@ struct imx_dma_channel { const char *name; void (*irq_handler) (int, void *, struct pt_regs *); - void (*err_handler) (int, void *, struct pt_regs *); + void (*err_handler) (int, void *, struct pt_regs *, int errcode); void *data; dmamode_t dma_mode; struct scatterlist *sg; @@ -58,6 +58,10 @@ struct imx_dma_channel { extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; +#define IMX_DMA_ERR_BURST 1 +#define IMX_DMA_ERR_REQUEST 2 +#define IMX_DMA_ERR_TRANSFER 4 +#define IMX_DMA_ERR_BUFFER 8 /* The type to distinguish channel numbers parameter from ordinal int type */ typedef int imx_dmach_t; @@ -74,7 +78,7 @@ imx_dma_setup_sg(imx_dmach_t dma_ch, int imx_dma_setup_handlers(imx_dmach_t dma_ch, void (*irq_handler) (int, void *, struct pt_regs *), - void (*err_handler) (int, void *, struct pt_regs *), void *data); + void (*err_handler) (int, void *, struct pt_regs *, int), void *data); void imx_dma_enable(imx_dmach_t dma_ch); diff --git a/include/asm-arm/arch-ixp23xx/entry-macro.S b/include/asm-arm/arch-ixp23xx/entry-macro.S index 0ef4e60..8677616 100644 --- a/include/asm-arm/arch-ixp23xx/entry-macro.S +++ b/include/asm-arm/arch-ixp23xx/entry-macro.S @@ -8,7 +8,7 @@ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET) ldr \irqnr, [\irqnr] @ get interrupt number - cmp \irqnr, #0x0 @ suprious interrupt ? + cmp \irqnr, #0x0 @ spurious interrupt ? movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits subne \irqnr, \irqnr, #1 @ convert to 0 based diff --git a/include/asm-arm/arch-ixp23xx/ixp23xx.h b/include/asm-arm/arch-ixp23xx/ixp23xx.h index e49e1ca..d0a7220 100644 --- a/include/asm-arm/arch-ixp23xx/ixp23xx.h +++ b/include/asm-arm/arch-ixp23xx/ixp23xx.h @@ -124,6 +124,7 @@ #define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28) #define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30) +#define IXP23XX_EXP_CFG_FUSE IXP23XX_EXP_CFG_REG(0x34) #define IXP23XX_EXP_BUS_PHYS 0x90000000 #define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000 @@ -251,7 +252,7 @@ * CAP CSRs. ****************************************************************************/ #define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x))) -#define IXP23XX_PROD_IDG IXP23XX_GLOBAL_REG(0x00) +#define IXP23XX_PRODUCT_ID IXP23XX_GLOBAL_REG(0x00) #define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04) #define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08) #define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c) @@ -265,6 +266,8 @@ #define IXP23XX_PCI_UNIT_RESET (1 << 1) #define IXP23XX_XSCALE_RESET (1 << 0) +#define IXP23XX_UENGINE_CSR_VIRT_BASE (IXP23XX_CAP_CSR_VIRT + 0x18000) + /**************************************************************************** * PCI CSRs. diff --git a/include/asm-arm/arch-ixp23xx/platform.h b/include/asm-arm/arch-ixp23xx/platform.h index e4d9906..19a73b3 100644 --- a/include/asm-arm/arch-ixp23xx/platform.h +++ b/include/asm-arm/arch-ixp23xx/platform.h @@ -14,6 +14,21 @@ #ifndef __ASSEMBLY__ +extern inline unsigned long ixp2000_reg_read(volatile void *reg) +{ + return *((volatile unsigned long *)reg); +} + +extern inline void ixp2000_reg_write(volatile void *reg, unsigned long val) +{ + *((volatile unsigned long *)reg) = val; +} + +extern inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) +{ + *((volatile unsigned long *)reg) = val; +} + struct pci_sys_data; void ixp23xx_map_io(void); diff --git a/include/asm-arm/arch-netx/debug-macro.S b/include/asm-arm/arch-netx/debug-macro.S new file mode 100644 index 0000000..a940d0e --- /dev/null +++ b/include/asm-arm/arch-netx/debug-macro.S @@ -0,0 +1,38 @@ +/* linux/include/asm-arm/arch-netx/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include "hardware.h" + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x00100000 @ physical + movne \rx, #io_p2v(0x00100000) @ virtual + orr \rx, \rx, #0x00000a00 + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #0x18] + tst \rd, #(1 << 3) + bne 1002b + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #0x18] + tst \rd, #(1 << 3) + bne 1001b + .endm diff --git a/include/asm-arm/arch-netx/dma.h b/include/asm-arm/arch-netx/dma.h new file mode 100644 index 0000000..4eda5fe --- /dev/null +++ b/include/asm-arm/arch-netx/dma.h @@ -0,0 +1,21 @@ +/* + * linux/include/asm-arm/arch-netx/dma.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MAX_DMA_CHANNELS 0 +#define MAX_DMA_ADDRESS ~0 diff --git a/include/asm-arm/arch-netx/entry-macro.S b/include/asm-arm/arch-netx/entry-macro.S new file mode 100644 index 0000000..658df4d --- /dev/null +++ b/include/asm-arm/arch-netx/entry-macro.S @@ -0,0 +1,35 @@ +/* + * include/asm-arm/arch-netx/entry-macro.S + * + * Low-level IRQ helper macros for Hilscher netX based platforms + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <asm/hardware.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + mov \base, #io_p2v(0x00100000) + add \base, \base, #0x000ff000 + + ldr \irqstat, [\base, #0] + clz \irqnr, \irqstat + rsb \irqnr, \irqnr, #31 + cmp \irqstat, #0 + .endm + diff --git a/include/asm-arm/arch-netx/eth.h b/include/asm-arm/arch-netx/eth.h new file mode 100644 index 0000000..643c90e --- /dev/null +++ b/include/asm-arm/arch-netx/eth.h @@ -0,0 +1,27 @@ +/* + * include/asm-arm/arch-netx/eth.h + * + * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef ASMARM_ARCH_ETH_H +#define ASMARM_ARCH_ETH_H + +struct netxeth_platform_data { + unsigned int xcno; /* number of xmac/xpec engine this eth uses */ +}; + +#endif diff --git a/include/asm-arm/arch-netx/hardware.h b/include/asm-arm/arch-netx/hardware.h new file mode 100644 index 0000000..7786c45 --- /dev/null +++ b/include/asm-arm/arch-netx/hardware.h @@ -0,0 +1,39 @@ +/* + * include/asm-arm/arch-netx/hardware.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#define NETX_IO_PHYS 0x00100000 +#define NETX_IO_VIRT 0xe0000000 +#define NETX_IO_SIZE 0x00100000 + +#define SRAM_INTERNAL_PHYS_0 0x00000 +#define SRAM_INTERNAL_PHYS_1 0x08000 +#define SRAM_INTERNAL_PHYS_2 0x10000 +#define SRAM_INTERNAL_PHYS_3 0x18000 +#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000) + +#define XPEC_MEM_SIZE 0x4000 +#define XMAC_MEM_SIZE 0x1000 +#define SRAM_MEM_SIZE 0x8000 + +#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT) +#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS) + +#endif diff --git a/include/asm-arm/arch-netx/io.h b/include/asm-arm/arch-netx/io.h new file mode 100644 index 0000000..81b7bc4 --- /dev/null +++ b/include/asm-arm/arch-netx/io.h @@ -0,0 +1,29 @@ +/* + * linux/include/asm-arm/arch-netx/io.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) +#define __mem_isa(a) (a) + +#endif diff --git a/include/asm-arm/arch-netx/irqs.h b/include/asm-arm/arch-netx/irqs.h new file mode 100644 index 0000000..a487dc6 --- /dev/null +++ b/include/asm-arm/arch-netx/irqs.h @@ -0,0 +1,70 @@ +/* + * include/asm-arm/arch-netx/irqs.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define NETX_IRQ_VIC_START 0 +#define NETX_IRQ_SOFTINT 0 +#define NETX_IRQ_TIMER0 1 +#define NETX_IRQ_TIMER1 2 +#define NETX_IRQ_TIMER2 3 +#define NETX_IRQ_SYSTIME_NS 4 +#define NETX_IRQ_SYSTIME_S 5 +#define NETX_IRQ_GPIO_15 6 +#define NETX_IRQ_WATCHDOG 7 +#define NETX_IRQ_UART0 8 +#define NETX_IRQ_UART1 9 +#define NETX_IRQ_UART2 10 +#define NETX_IRQ_USB 11 +#define NETX_IRQ_SPI 12 +#define NETX_IRQ_I2C 13 +#define NETX_IRQ_LCD 14 +#define NETX_IRQ_HIF 15 +#define NETX_IRQ_GPIO_0_14 16 +#define NETX_IRQ_XPEC0 17 +#define NETX_IRQ_XPEC1 18 +#define NETX_IRQ_XPEC2 19 +#define NETX_IRQ_XPEC3 20 +#define NETX_IRQ_XPEC(no) (17 + (no)) +#define NETX_IRQ_MSYNC0 21 +#define NETX_IRQ_MSYNC1 22 +#define NETX_IRQ_MSYNC2 23 +#define NETX_IRQ_MSYNC3 24 +#define NETX_IRQ_IRQ_PHY 25 +#define NETX_IRQ_ISO_AREA 26 +/* int 27 is reserved */ +/* int 28 is reserved */ +#define NETX_IRQ_TIMER3 29 +#define NETX_IRQ_TIMER4 30 +/* int 31 is reserved */ + +#define NETX_IRQS 32 + +/* for multiplexed irqs on gpio 0..14 */ +#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x)) +#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14) + +/* Host interface interrupts */ +#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x)) +#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0) +#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1) +#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2) +#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3) +#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4) +#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4) + +#define NR_IRQS (NETX_IRQ_HIF_LAST + 1) diff --git a/include/asm-arm/arch-netx/memory.h b/include/asm-arm/arch-netx/memory.h new file mode 100644 index 0000000..6d8d2df --- /dev/null +++ b/include/asm-arm/arch-netx/memory.h @@ -0,0 +1,36 @@ +/* + * linux/include/asm-arm/arch-netx/memory.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x80000000) + +/* + * Virtual view <-> DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif + diff --git a/include/asm-arm/arch-netx/netx-regs.h b/include/asm-arm/arch-netx/netx-regs.h new file mode 100644 index 0000000..8ab45be --- /dev/null +++ b/include/asm-arm/arch-netx/netx-regs.h @@ -0,0 +1,410 @@ +/* + * include/asm-arm/arch-netx/netx-regs.h + * + * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_NETX_REGS_H +#define __ASM_ARCH_NETX_REGS_H + +/* offsets relative to the beginning of the io space */ +#define NETX_OFS_SYSTEM 0x00000 +#define NETX_OFS_MEMCR 0x00100 +#define NETX_OFS_DPMAS 0x03000 +#define NETX_OFS_GPIO 0x00800 +#define NETX_OFS_PIO 0x00900 +#define NETX_OFS_UART0 0x00a00 +#define NETX_OFS_UART1 0x00a40 +#define NETX_OFS_UART2 0x00a80 +#define NETX_OF_MIIMU 0x00b00 +#define NETX_OFS_SPI 0x00c00 +#define NETX_OFS_I2C 0x00d00 +#define NETX_OFS_SYSTIME 0x01100 +#define NETX_OFS_RTC 0x01200 +#define NETX_OFS_EXTBUS 0x03600 +#define NETX_OFS_LCD 0x04000 +#define NETX_OFS_USB 0x20000 +#define NETX_OFS_XMAC0 0x60000 +#define NETX_OFS_XMAC1 0x61000 +#define NETX_OFS_XMAC2 0x62000 +#define NETX_OFS_XMAC3 0x63000 +#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000) +#define NETX_OFS_PFIFO 0x64000 +#define NETX_OFS_XPEC0 0x70000 +#define NETX_OFS_XPEC1 0x74000 +#define NETX_OFS_XPEC2 0x78000 +#define NETX_OFS_XPEC3 0x7c000 +#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000) +#define NETX_OFS_VIC 0xff000 + +/* physical addresses */ +#define NETX_PA_SYSTEM (NETX_IO_PHYS + NETX_OFS_SYSTEM) +#define NETX_PA_MEMCR (NETX_IO_PHYS + NETX_OFS_MEMCR) +#define NETX_PA_DPMAS (NETX_IO_PHYS + NETX_OFS_DPMAS) +#define NETX_PA_GPIO (NETX_IO_PHYS + NETX_OFS_GPIO) +#define NETX_PA_PIO (NETX_IO_PHYS + NETX_OFS_PIO) +#define NETX_PA_UART0 (NETX_IO_PHYS + NETX_OFS_UART0) +#define NETX_PA_UART1 (NETX_IO_PHYS + NETX_OFS_UART1) +#define NETX_PA_UART2 (NETX_IO_PHYS + NETX_OFS_UART2) +#define NETX_PA_MIIMU (NETX_IO_PHYS + NETX_OF_MIIMU) +#define NETX_PA_SPI (NETX_IO_PHYS + NETX_OFS_SPI) +#define NETX_PA_I2C (NETX_IO_PHYS + NETX_OFS_I2C) +#define NETX_PA_SYSTIME (NETX_IO_PHYS + NETX_OFS_SYSTIME) +#define NETX_PA_RTC (NETX_IO_PHYS + NETX_OFS_RTC) +#define NETX_PA_EXTBUS (NETX_IO_PHYS + NETX_OFS_EXTBUS) +#define NETX_PA_LCD (NETX_IO_PHYS + NETX_OFS_LCD) +#define NETX_PA_USB (NETX_IO_PHYS + NETX_OFS_USB) +#define NETX_PA_XMAC0 (NETX_IO_PHYS + NETX_OFS_XMAC0) +#define NETX_PA_XMAC1 (NETX_IO_PHYS + NETX_OFS_XMAC1) +#define NETX_PA_XMAC2 (NETX_IO_PHYS + NETX_OFS_XMAC2) +#define NETX_PA_XMAC3 (NETX_IO_PHYS + NETX_OFS_XMAC3) +#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no)) +#define NETX_PA_PFIFO (NETX_IO_PHYS + NETX_OFS_PFIFO) +#define NETX_PA_XPEC0 (NETX_IO_PHYS + NETX_OFS_XPEC0) +#define NETX_PA_XPEC1 (NETX_IO_PHYS + NETX_OFS_XPEC1) +#define NETX_PA_XPEC2 (NETX_IO_PHYS + NETX_OFS_XPEC2) +#define NETX_PA_XPEC3 (NETX_IO_PHYS + NETX_OFS_XPEC3) +#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no)) +#define NETX_PA_VIC (NETX_IO_PHYS + NETX_OFS_VIC) + +/* virual addresses */ +#define NETX_VA_SYSTEM (NETX_IO_VIRT + NETX_OFS_SYSTEM) +#define NETX_VA_MEMCR (NETX_IO_VIRT + NETX_OFS_MEMCR) +#define NETX_VA_DPMAS (NETX_IO_VIRT + NETX_OFS_DPMAS) +#define NETX_VA_GPIO (NETX_IO_VIRT + NETX_OFS_GPIO) +#define NETX_VA_PIO (NETX_IO_VIRT + NETX_OFS_PIO) +#define NETX_VA_UART0 (NETX_IO_VIRT + NETX_OFS_UART0) +#define NETX_VA_UART1 (NETX_IO_VIRT + NETX_OFS_UART1) +#define NETX_VA_UART2 (NETX_IO_VIRT + NETX_OFS_UART2) +#define NETX_VA_MIIMU (NETX_IO_VIRT + NETX_OF_MIIMU) +#define NETX_VA_SPI (NETX_IO_VIRT + NETX_OFS_SPI) +#define NETX_VA_I2C (NETX_IO_VIRT + NETX_OFS_I2C) +#define NETX_VA_SYSTIME (NETX_IO_VIRT + NETX_OFS_SYSTIME) +#define NETX_VA_RTC (NETX_IO_VIRT + NETX_OFS_RTC) +#define NETX_VA_EXTBUS (NETX_IO_VIRT + NETX_OFS_EXTBUS) +#define NETX_VA_LCD (NETX_IO_VIRT + NETX_OFS_LCD) +#define NETX_VA_USB (NETX_IO_VIRT + NETX_OFS_USB) +#define NETX_VA_XMAC0 (NETX_IO_VIRT + NETX_OFS_XMAC0) +#define NETX_VA_XMAC1 (NETX_IO_VIRT + NETX_OFS_XMAC1) +#define NETX_VA_XMAC2 (NETX_IO_VIRT + NETX_OFS_XMAC2) +#define NETX_VA_XMAC3 (NETX_IO_VIRT + NETX_OFS_XMAC3) +#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no)) +#define NETX_VA_PFIFO (NETX_IO_VIRT + NETX_OFS_PFIFO) +#define NETX_VA_XPEC0 (NETX_IO_VIRT + NETX_OFS_XPEC0) +#define NETX_VA_XPEC1 (NETX_IO_VIRT + NETX_OFS_XPEC1) +#define NETX_VA_XPEC2 (NETX_IO_VIRT + NETX_OFS_XPEC2) +#define NETX_VA_XPEC3 (NETX_IO_VIRT + NETX_OFS_XPEC3) +#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no)) +#define NETX_VA_VIC (NETX_IO_VIRT + NETX_OFS_VIC) + +/********************************* + * System functions * + *********************************/ + +/* Registers */ +#define NETX_SYSTEM_REG(ofs) __io(NETX_VA_SYSTEM + (ofs)) +#define NETX_SYSTEM_BOO_SR NETX_SYSTEM_REG(0x00) +#define NETX_SYSTEM_IOC_CR NETX_SYSTEM_REG(0x04) +#define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08) + +/* FIXME: Docs are not consistent */ +#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) +/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c) */ + +#define NETX_SYSTEM_PHY_CONTROL NETX_SYSTEM_REG(0x10) +#define NETX_SYSTEM_REV NETX_SYSTEM_REG(0x34) +#define NETX_SYSTEM_IOC_ACCESS_KEY NETX_SYSTEM_REG(0x70) +#define NETX_SYSTEM_WDG_TR NETX_SYSTEM_REG(0x200) +#define NETX_SYSTEM_WDG_CTR NETX_SYSTEM_REG(0x204) +#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208) +#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c) + +/* Bits */ +#define NETX_SYSTEM_RES_CR_RSTIN (1<<0) +#define NETX_SYSTEM_RES_CR_WDG_RES (1<<1) +#define NETX_SYSTEM_RES_CR_HOST_RES (1<<2) +#define NETX_SYSTEM_RES_CR_FIRMW_RES (1<<3) +#define NETX_SYSTEM_RES_CR_XPEC0_RES (1<<4) +#define NETX_SYSTEM_RES_CR_XPEC1_RES (1<<5) +#define NETX_SYSTEM_RES_CR_XPEC2_RES (1<<6) +#define NETX_SYSTEM_RES_CR_XPEC3_RES (1<<7) +#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16) +#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17) +#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18) +#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19) +#define NETX_SYSTEM_RES_CR_FIRMW_FLG0 (1<<20) +#define NETX_SYSTEM_RES_CR_FIRMW_FLG1 (1<<21) +#define NETX_SYSTEM_RES_CR_FIRMW_FLG2 (1<<22) +#define NETX_SYSTEM_RES_CR_FIRMW_FLG3 (1<<23) +#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN (1<<24) +#define NETX_SYSTEM_RES_CR_RSTOUT (1<<25) +#define NETX_SYSTEM_RES_CR_EN_RSTOUT (1<<26) + +#define PHY_CONTROL_RESET (1<<31) +#define PHY_CONTROL_SIM_BYP (1<<30) +#define PHY_CONTROL_CLK_XLATIN (1<<29) +#define PHY_CONTROL_PHY1_EN (1<<21) +#define PHY_CONTROL_PHY1_NP_MSG_CODE +#define PHY_CONTROL_PHY1_AUTOMDIX (1<<17) +#define PHY_CONTROL_PHY1_FIXMODE (1<<16) +#define PHY_CONTROL_PHY1_MODE(mode) (((mode) & 0x7) << 13) +#define PHY_CONTROL_PHY0_EN (1<<12) +#define PHY_CONTROL_PHY0_NP_MSG_CODE +#define PHY_CONTROL_PHY0_AUTOMDIX (1<<8) +#define PHY_CONTROL_PHY0_FIXMODE (1<<7) +#define PHY_CONTROL_PHY0_MODE(mode) (((mode) & 0x7) << 4) +#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf) + +#define PHY_MODE_10BASE_T_HALF 0 +#define PHY_MODE_10BASE_T_FULL 1 +#define PHY_MODE_100BASE_TX_FX_FULL 2 +#define PHY_MODE_100BASE_TX_FX_HALF 3 +#define PHY_MODE_100BASE_TX_HALF 4 +#define PHY_MODE_REPEATER 5 +#define PHY_MODE_POWER_DOWN 6 +#define PHY_MODE_ALL 7 + +/* Bits */ +#define VECT_CNTL_ENABLE (1 << 5) + +/******************************* + * GPIO and timer module * + *******************************/ + +/* Registers */ +#define NETX_GPIO_REG(ofs) __io(NETX_VA_GPIO + (ofs)) +#define NETX_GPIO_CFG(gpio) NETX_GPIO_REG(0x0 + ((gpio)<<2)) +#define NETX_GPIO_THRESHOLD_CAPTURE(gpio) NETX_GPIO_REG(0x40 + ((gpio)<<2)) +#define NETX_GPIO_COUNTER_CTRL(counter) NETX_GPIO_REG(0x80 + ((counter)<<2)) +#define NETX_GPIO_COUNTER_MAX(counter) NETX_GPIO_REG(0x94 + ((counter)<<2)) +#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2)) +#define NETX_GPIO_IRQ_ENABLE NETX_GPIO_REG(0xbc) +#define NETX_GPIO_IRQ_DISABLE NETX_GPIO_REG(0xc0) +#define NETX_GPIO_SYSTIME_NS_CMP NETX_GPIO_REG(0xc4) +#define NETX_GPIO_LINE NETX_GPIO_REG(0xc8) +#define NETX_GPIO_IRQ NETX_GPIO_REG(0xd0) + +/* Bits */ +#define NETX_GPIO_CFG_IOCFG_GP_INPUT (0x0) +#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT (0x1) +#define NETX_GPIO_CFG_IOCFG_GP_UART (0x2) +#define NETX_GPIO_CFG_INV (1<<2) +#define NETX_GPIO_CFG_MODE_INPUT_READ (0<<3) +#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3) +#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3) +#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL (3<<3) +#define NETX_GPIO_CFG_COUNT_REF_COUNTER0 (0<<5) +#define NETX_GPIO_CFG_COUNT_REF_COUNTER1 (1<<5) +#define NETX_GPIO_CFG_COUNT_REF_COUNTER2 (2<<5) +#define NETX_GPIO_CFG_COUNT_REF_COUNTER3 (3<<5) +#define NETX_GPIO_CFG_COUNT_REF_COUNTER4 (4<<5) +#define NETX_GPIO_CFG_COUNT_REF_SYSTIME (7<<5) + +#define NETX_GPIO_COUNTER_CTRL_RUN (1<<0) +#define NETX_GPIO_COUNTER_CTRL_SYM (1<<1) +#define NETX_GPIO_COUNTER_CTRL_ONCE (1<<2) +#define NETX_GPIO_COUNTER_CTRL_IRQ_EN (1<<3) +#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT (1<<4) +#define NETX_GPIO_COUNTER_CTRL_RST_EN (1<<5) +#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT (1<<6) +#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */ + +#define GPIO_BIT(gpio) (1<<(gpio)) +#define COUNTER_BIT(counter) ((1<<16)<<(counter)) + +/******************************* + * PIO * + *******************************/ + +/* Registers */ +#define NETX_PIO_REG(ofs) __io(NETX_VA_PIO + (ofs)) +#define NETX_PIO_INPIO NETX_PIO_REG(0x0) +#define NETX_PIO_OUTPIO NETX_PIO_REG(0x4) +#define NETX_PIO_OEPIO NETX_PIO_REG(0x8) + +/******************************* + * MII Unit * + *******************************/ + +/* Registers */ +#define NETX_MIIMU __io(NETX_VA_MIIMU) + +/* Bits */ +#define MIIMU_SNRDY (1<<0) +#define MIIMU_PREAMBLE (1<<1) +#define MIIMU_OPMODE_WRITE (1<<2) +#define MIIMU_MDC_PERIOD (1<<3) +#define MIIMU_PHY_NRES (1<<4) +#define MIIMU_RTA (1<<5) +#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6) +#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11) +#define MIIMU_DATA(data) (((data) & 0xffff) << 16) + +/******************************* + * xmac / xpec * + *******************************/ + +/* XPEC register offsets relative to NETX_VA_XPEC(no) */ +#define NETX_XPEC_R0_OFS 0x00 +#define NETX_XPEC_R1_OFS 0x04 +#define NETX_XPEC_R2_OFS 0x08 +#define NETX_XPEC_R3_OFS 0x0c +#define NETX_XPEC_R4_OFS 0x10 +#define NETX_XPEC_R5_OFS 0x14 +#define NETX_XPEC_R6_OFS 0x18 +#define NETX_XPEC_R7_OFS 0x1c +#define NETX_XPEC_RANGE01_OFS 0x20 +#define NETX_XPEC_RANGE23_OFS 0x24 +#define NETX_XPEC_RANGE45_OFS 0x28 +#define NETX_XPEC_RANGE67_OFS 0x2c +#define NETX_XPEC_PC_OFS 0x48 +#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2)) +#define NETX_XPEC_IRQ_OFS 0x8c +#define NETX_XPEC_SYSTIME_NS_OFS 0x90 +#define NETX_XPEC_FIFO_DATA_OFS 0x94 +#define NETX_XPEC_SYSTIME_S_OFS 0x98 +#define NETX_XPEC_ADC_OFS 0x9c +#define NETX_XPEC_URX_COUNT_OFS 0x40 +#define NETX_XPEC_UTX_COUNT_OFS 0x44 +#define NETX_XPEC_PC_OFS 0x48 +#define NETX_XPEC_ZERO_OFS 0x4c +#define NETX_XPEC_STATCFG_OFS 0x50 +#define NETX_XPEC_EC_MASKA_OFS 0x54 +#define NETX_XPEC_EC_MASKB_OFS 0x58 +#define NETX_XPEC_EC_MASK0_OFS 0x5c +#define NETX_XPEC_EC_MASK8_OFS 0x7c +#define NETX_XPEC_EC_MASK9_OFS 0x80 +#define NETX_XPEC_XPU_HOLD_PC_OFS 0x100 +#define NETX_XPEC_RAM_START_OFS 0x2000 + +/* Bits */ +#define XPU_HOLD_PC (1<<0) + +/* XMAC register offsets relative to NETX_VA_XMAC(no) */ +#define NETX_XMAC_RPU_PROGRAM_START_OFS 0x000 +#define NETX_XMAC_RPU_PROGRAM_END_OFS 0x3ff +#define NETX_XMAC_TPU_PROGRAM_START_OFS 0x400 +#define NETX_XMAC_TPU_PROGRAM_END_OFS 0x7ff +#define NETX_XMAC_RPU_HOLD_PC_OFS 0xa00 +#define NETX_XMAC_TPU_HOLD_PC_OFS 0xa04 +#define NETX_XMAC_STATUS_SHARED0_OFS 0x840 +#define NETX_XMAC_CONFIG_SHARED0_OFS 0x844 +#define NETX_XMAC_STATUS_SHARED1_OFS 0x848 +#define NETX_XMAC_CONFIG_SHARED1_OFS 0x84c +#define NETX_XMAC_STATUS_SHARED2_OFS 0x850 +#define NETX_XMAC_CONFIG_SHARED2_OFS 0x854 +#define NETX_XMAC_STATUS_SHARED3_OFS 0x858 +#define NETX_XMAC_CONFIG_SHARED3_OFS 0x85c + +#define RPU_HOLD_PC (1<<15) +#define TPU_HOLD_PC (1<<15) + +/******************************* + * Pointer FIFO * + *******************************/ + +/* Registers */ +#define NETX_PFIFO_REG(ofs) __io(NETX_VA_PFIFO + (ofs)) +#define NETX_PFIFO_BASE(pfifo) NETX_PFIFO_REG(0x00 + ((pfifo)<<2)) +#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2)) +#define NETX_PFIFO_RESET NETX_PFIFO_REG(0x100) +#define NETX_PFIFO_FULL NETX_PFIFO_REG(0x104) +#define NETX_PFIFO_EMPTY NETX_PFIFO_REG(0x108) +#define NETX_PFIFO_OVEFLOW NETX_PFIFO_REG(0x10c) +#define NETX_PFIFO_UNDERRUN NETX_PFIFO_REG(0x110) +#define NETX_PFIFO_FILL_LEVEL(pfifo) NETX_PFIFO_REG(0x180 + ((pfifo)<<2)) +#define NETX_PFIFO_XPEC_ISR(xpec) NETX_PFIFO_REG(0x400 + ((xpec) << 2)) + +/******************************* + * Dual Port Memory * + *******************************/ + +/* Registers */ +#define NETX_DPMAS_REG(ofs) __io(NETX_VA_DPMAS + (ofs)) +#define NETX_DPMAS_SYS_STAT NETX_DPMAS_REG(0x4d8) +#define NETX_DPMAS_INT_STAT NETX_DPMAS_REG(0x4e0) +#define NETX_DPMAS_INT_EN NETX_DPMAS_REG(0x4f0) +#define NETX_DPMAS_IF_CONF0 NETX_DPMAS_REG(0x608) +#define NETX_DPMAS_IF_CONF1 NETX_DPMAS_REG(0x60c) +#define NETX_DPMAS_EXT_CONFIG(cs) NETX_DPMAS_REG(0x610 + 4 * (cs)) +#define NETX_DPMAS_IO_MODE0 NETX_DPMAS_REG(0x620) /* I/O 32..63 */ +#define NETX_DPMAS_DRV_EN0 NETX_DPMAS_REG(0x624) +#define NETX_DPMAS_DATA0 NETX_DPMAS_REG(0x628) +#define NETX_DPMAS_IO_MODE1 NETX_DPMAS_REG(0x630) /* I/O 64..84 */ +#define NETX_DPMAS_DRV_EN1 NETX_DPMAS_REG(0x634) +#define NETX_DPMAS_DATA1 NETX_DPMAS_REG(0x638) + +/* Bits */ +#define NETX_DPMAS_INT_EN_GLB_EN (1<<31) +#define NETX_DPMAS_INT_EN_MEM_LCK (1<<30) +#define NETX_DPMAS_INT_EN_WDG (1<<29) +#define NETX_DPMAS_INT_EN_PIO72 (1<<28) +#define NETX_DPMAS_INT_EN_PIO47 (1<<27) +#define NETX_DPMAS_INT_EN_PIO40 (1<<26) +#define NETX_DPMAS_INT_EN_PIO36 (1<<25) +#define NETX_DPMAS_INT_EN_PIO35 (1<<24) + +#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28) +#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS (1<<28) +#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT (2<<28) +#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28) +#define NETX_DPMAS_IF_CONF0_HIF_IO (4<<28) +#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP (1<<14) +#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD (2<<14) +#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14) + +#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26) +#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27) +#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28) +#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29) +#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30) + +#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29) +#define NETX_EXT_CONFIG_TADRHOLD(x) (((x) & 0x7) << 26) +#define NETX_EXT_CONFIG_TCSON(x) (((x) & 0x7) << 23) +#define NETX_EXT_CONFIG_TRDON(x) (((x) & 0x7) << 20) +#define NETX_EXT_CONFIG_TWRON(x) (((x) & 0x7) << 17) +#define NETX_EXT_CONFIG_TWROFF(x) (((x) & 0x1f) << 12) +#define NETX_EXT_CONFIG_TRDWRCYC(x) (((x) & 0x1f) << 7) +#define NETX_EXT_CONFIG_WAIT_POL (1<<6) +#define NETX_EXT_CONFIG_WAIT_EN (1<<5) +#define NETX_EXT_CONFIG_NRD_MODE (1<<4) +#define NETX_EXT_CONFIG_DS_MODE (1<<3) +#define NETX_EXT_CONFIG_NWR_MODE (1<<2) +#define NETX_EXT_CONFIG_16BIT (1<<1) +#define NETX_EXT_CONFIG_CS_ENABLE (1<<0) + +#define NETX_DPMAS_IO_MODE0_WRL (1<<13) +#define NETX_DPMAS_IO_MODE0_WAIT (1<<14) +#define NETX_DPMAS_IO_MODE0_READY (1<<15) +#define NETX_DPMAS_IO_MODE0_CS0 (1<<19) +#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20) + +#define NETX_DPMAS_IO_MODE1_CS2 (1<<15) +#define NETX_DPMAS_IO_MODE1_CS1 (1<<16) +#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR (0<<30) +#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30) +#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30) +#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36 (3<<30) + +/******************************* + * I2C * + *******************************/ +#define NETX_I2C_REG(ofs) __io(NETX_VA_I2C, (ofs)) +#define NETX_I2C_CTRL NETX_I2C_REG(0x0) +#define NETX_I2C_DATA NETX_I2C_REG(0x4) + +#endif /* __ASM_ARCH_NETX_REGS_H */ diff --git a/include/asm-arm/arch-netx/param.h b/include/asm-arm/arch-netx/param.h new file mode 100644 index 0000000..7a80c26 --- /dev/null +++ b/include/asm-arm/arch-netx/param.h @@ -0,0 +1,18 @@ +/* + * linux/include/asm-arm/arch-netx/param.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ diff --git a/include/asm-arm/arch-netx/pfifo.h b/include/asm-arm/arch-netx/pfifo.h new file mode 100644 index 0000000..4af2ee4 --- /dev/null +++ b/include/asm-arm/arch-netx/pfifo.h @@ -0,0 +1,54 @@ +/* + * include/asm-arm/arch-netx/pfifo.h + * + * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#ifndef ASM_ARCH_PFIFO_H +#define ASM_ARCH_PFIFO_H + +static inline int pfifo_push(int no, unsigned int pointer) +{ + writel(pointer, NETX_PFIFO_BASE(no)); + return 0; +} + +static inline unsigned int pfifo_pop(int no) +{ + return readl(NETX_PFIFO_BASE(no)); +} + +static inline int pfifo_fill_level(int no) +{ + + return readl(NETX_PFIFO_FILL_LEVEL(no)); +} + +static inline int pfifo_full(int no) +{ + return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0; +} + +static inline int pfifo_empty(int no) +{ + return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0; +} + +int pfifo_request(unsigned int pfifo_mask); +void pfifo_free(unsigned int pfifo_mask); + +#endif /* ASM_ARCH_PFIFO_H */ diff --git a/include/asm-arm/arch-netx/system.h b/include/asm-arm/arch-netx/system.h new file mode 100644 index 0000000..52adf36 --- /dev/null +++ b/include/asm-arm/arch-netx/system.h @@ -0,0 +1,38 @@ +/* + * include/asm-arm/arch-netx/system.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include <asm/io.h> +#include <asm/hardware.h> +#include "netx-regs.h" + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES, + NETX_SYSTEM_RES_CR); +} + +#endif + diff --git a/include/asm-arm/arch-netx/timex.h b/include/asm-arm/arch-netx/timex.h new file mode 100644 index 0000000..7fdb42da --- /dev/null +++ b/include/asm-arm/arch-netx/timex.h @@ -0,0 +1,20 @@ +/* + * include/asm-arm/arch-netx/timex.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define CLOCK_TICK_RATE 100000000 diff --git a/include/asm-arm/arch-netx/uncompress.h b/include/asm-arm/arch-netx/uncompress.h new file mode 100644 index 0000000..f894345 --- /dev/null +++ b/include/asm-arm/arch-netx/uncompress.h @@ -0,0 +1,76 @@ +/* + * include/asm-arm/arch-netx/uncompress.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. We search for the first enabled + * port in the most probable order. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + * + * This does not append a newline + */ + +#define REG(x) (*(volatile unsigned long *)(x)) + +#define UART1_BASE 0x100a00 +#define UART2_BASE 0x100a80 + +#define UART_DR 0x0 + +#define UART_CR 0x14 +#define CR_UART_EN (1<<0) + +#define UART_FR 0x18 +#define FR_BUSY (1<<3) +#define FR_TXFF (1<<5) + +static void putc(char c) +{ + unsigned long base; + + if (REG(UART1_BASE + UART_CR) & CR_UART_EN) + base = UART1_BASE; + else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) + base = UART2_BASE; + else + return; + + while (REG(base + UART_FR) & FR_TXFF); + REG(base + UART_DR) = c; +} + +static inline void flush(void) +{ + unsigned long base; + + if (REG(UART1_BASE + UART_CR) & CR_UART_EN) + base = UART1_BASE; + else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) + base = UART2_BASE; + else + return; + + while (REG(base + UART_FR) & FR_BUSY); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-netx/vmalloc.h b/include/asm-arm/arch-netx/vmalloc.h new file mode 100644 index 0000000..da2da5a --- /dev/null +++ b/include/asm-arm/arch-netx/vmalloc.h @@ -0,0 +1,19 @@ +/* + * linux/include/asm-arm/arch-netx/vmalloc.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-netx/xc.h b/include/asm-arm/arch-netx/xc.h new file mode 100644 index 0000000..659af19 --- /dev/null +++ b/include/asm-arm/arch-netx/xc.h @@ -0,0 +1,42 @@ +/* + * linux/include/asm-arm/arch-netx/xc.h + * + * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_XC_H +#define __ASM_ARCH_XC_H + +struct xc { + int no; + unsigned int type; + unsigned int version; + void __iomem *xpec_base; + void __iomem *xmac_base; + void __iomem *sram_base; + int irq; + struct device *dev; +}; + +int xc_reset(struct xc *x); +int xc_stop(struct xc* x); +int xc_start(struct xc *x); +int xc_running(struct xc *x); +int xc_request_firmware(struct xc* x); +struct xc* request_xc(int xcno, struct device *dev); +void free_xc(struct xc *x); + +#endif /* __ASM_ARCH_XC_H */ diff --git a/include/asm-arm/arch-pnx4008/debug-macro.S b/include/asm-arm/arch-pnx4008/debug-macro.S index eb3839d..67d18a2 100644 --- a/include/asm-arm/arch-pnx4008/debug-macro.S +++ b/include/asm-arm/arch-pnx4008/debug-macro.S @@ -19,9 +19,5 @@ addne \rx, \rx, #0xf4000000 .endm - .macro senduart,rd,rx - strb \rd, [\rx, #0x0] - .endm - #define UART_SHIFT 2 #include <asm/hardware/debug-8250.S> diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/include/asm-arm/arch-pnx4008/gpio.h index 1fa5a77..d01bf83 100644 --- a/include/asm-arm/arch-pnx4008/gpio.h +++ b/include/asm-arm/arch-pnx4008/gpio.h @@ -127,6 +127,79 @@ #define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK)) #define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK)) +/* Start Enable Pin Interrupts - table 58 page 66 */ + +#define SE_PIN_BASE_INT 32 + +#define SE_U7_RX_INT 63 +#define SE_U7_HCTS_INT 62 +#define SE_BT_CLKREQ_INT 61 +#define SE_U6_IRRX_INT 60 +/*59 unused*/ +#define SE_U5_RX_INT 58 +#define SE_GPI_11_INT 57 +#define SE_U3_RX_INT 56 +#define SE_U2_HCTS_INT 55 +#define SE_U2_RX_INT 54 +#define SE_U1_RX_INT 53 +#define SE_DISP_SYNC_INT 52 +/*51 unused*/ +#define SE_SDIO_INT_N 50 +#define SE_MSDIO_START_INT 49 +#define SE_GPI_06_INT 48 +#define SE_GPI_05_INT 47 +#define SE_GPI_04_INT 46 +#define SE_GPI_03_INT 45 +#define SE_GPI_02_INT 44 +#define SE_GPI_01_INT 43 +#define SE_GPI_00_INT 42 +#define SE_SYSCLKEN_PIN_INT 41 +#define SE_SPI1_DATAIN_INT 40 +#define SE_GPI_07_INT 39 +#define SE_SPI2_DATAIN_INT 38 +#define SE_GPI_10_INT 37 +#define SE_GPI_09_INT 36 +#define SE_GPI_08_INT 35 +/*34-32 unused*/ + +/* Start Enable Internal Interrupts - table 57 page 65 */ + +#define SE_INT_BASE_INT 0 + +#define SE_TS_IRQ 31 +#define SE_TS_P_INT 30 +#define SE_TS_AUX_INT 29 +/*27-28 unused*/ +#define SE_USB_AHB_NEED_CLK_INT 26 +#define SE_MSTIMER_INT 25 +#define SE_RTC_INT 24 +#define SE_USB_NEED_CLK_INT 23 +#define SE_USB_INT 22 +#define SE_USB_I2C_INT 21 +#define SE_USB_OTG_TIMER_INT 20 +#define SE_USB_OTG_ATX_INT_N 19 +/*18 unused*/ +#define SE_DSP_GPIO4_INT 17 +#define SE_KEY_IRQ 16 +#define SE_DSP_SLAVEPORT_INT 15 +#define SE_DSP_GPIO1_INT 14 +#define SE_DSP_GPIO0_INT 13 +#define SE_DSP_AHB_INT 12 +/*11-6 unused*/ +#define SE_GPIO_05_INT 5 +#define SE_GPIO_04_INT 4 +#define SE_GPIO_03_INT 3 +#define SE_GPIO_02_INT 2 +#define SE_GPIO_01_INT 1 +#define SE_GPIO_00_INT 0 + +#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) + +#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) +#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) +#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) +#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) + extern int pnx4008_gpio_register_pin(unsigned short pin); extern int pnx4008_gpio_unregister_pin(unsigned short pin); extern unsigned long pnx4008_gpio_read_pin(unsigned short pin); @@ -136,4 +209,33 @@ extern int pnx4008_gpio_read_pin_direction(unsigned short pin); extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output); extern int pnx4008_gpio_read_pin_mux(unsigned short pin); +static inline void start_int_umask(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_ER_REG(irq)) | + START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); +} + +static inline void start_int_mask(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_ER_REG(irq)) & + ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); +} + +static inline void start_int_ack(u8 irq) +{ + __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq)); +} + +static inline void start_int_set_falling_edge(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_APR_REG(irq)) & + ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); +} + +static inline void start_int_set_rising_edge(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_APR_REG(irq)) | + START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); +} + #endif /* _PNX4008_GPIO_H_ */ diff --git a/include/asm-arm/arch-pnx4008/pm.h b/include/asm-arm/arch-pnx4008/pm.h index c660486..bac1634c 100644 --- a/include/asm-arm/arch-pnx4008/pm.h +++ b/include/asm-arm/arch-pnx4008/pm.h @@ -29,34 +29,5 @@ extern void pnx4008_cpu_standby(void); extern int pnx4008_startup_pll(struct clk *); extern int pnx4008_shutdown_pll(struct clk *); -static inline void start_int_umask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_mask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_ack(u8 irq) -{ - __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq)); -} - -static inline void start_int_set_falling_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - -static inline void start_int_set_rising_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - #endif /* ASSEMBLER */ #endif /* __ASM_ARCH_PNX4008_PM_H */ diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h index 6b5ac51..4d6a403 100644 --- a/include/asm-arm/arch-pxa/poodle.h +++ b/include/asm-arm/arch-pxa/poodle.h @@ -31,6 +31,7 @@ #define POODLE_GPIO_CF_CD (14) #define POODLE_GPIO_CF_STSCHG (14) #define POODLE_GPIO_SD_PWR (33) +#define POODLE_GPIO_SD_PWR1 (3) #define POODLE_GPIO_nSD_CLK (6) #define POODLE_GPIO_nSD_WP (7) #define POODLE_GPIO_nSD_INT (8) @@ -42,6 +43,7 @@ #define POODLE_GPIO_BYPASS_ON (36) #define POODLE_GPIO_CHRG_ON (38) #define POODLE_GPIO_CHRG_FULL (16) +#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */ /* PXA GPIOs */ #define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0) @@ -68,4 +70,6 @@ #define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) #define POODLE_SCOOP_IO_OUT ( 0 ) +extern struct platform_device poodle_locomo_device; + #endif /* __ASM_ARCH_POODLE_H */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 6650d4d..9f83f4a 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1625,7 +1625,7 @@ #define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ #define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ #define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ -#define SSCR0_SlotsPerFrm(c) ((x) - 1) /* Time slots per frame [1..8] */ +#define SSCR0_SlotsPerFrm(x) ((x) - 1) /* Time slots per frame [1..8] */ #define SSCR0_ADC (1 << 30) /* Audio clock select */ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ #endif @@ -1706,6 +1706,10 @@ #if defined (CONFIG_PXA27x) #define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */ #define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */ +#define SSTSA_P1 __REG(0x41000030) /* SSP Port 1 Tx Timeslot Active */ +#define SSRSA_P1 __REG(0x41000034) /* SSP Port 1 Rx Timeslot Active */ +#define SSTSS_P1 __REG(0x41000038) /* SSP Port 1 Timeslot Status */ +#define SSACD_P1 __REG(0x4100003C) /* SSP Port 1 Audio Clock Divider */ #define SSCR0_P2 __REG(0x41700000) /* SSP Port 2 Control Register 0 */ #define SSCR1_P2 __REG(0x41700004) /* SSP Port 2 Control Register 1 */ #define SSSR_P2 __REG(0x41700008) /* SSP Port 2 Status Register */ @@ -1713,6 +1717,10 @@ #define SSDR_P2 __REG(0x41700010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */ #define SSTO_P2 __REG(0x41700028) /* SSP Port 2 Time Out Register */ #define SSPSP_P2 __REG(0x4170002C) /* SSP Port 2 Programmable Serial Protocol */ +#define SSTSA_P2 __REG(0x41700030) /* SSP Port 2 Tx Timeslot Active */ +#define SSRSA_P2 __REG(0x41700034) /* SSP Port 2 Rx Timeslot Active */ +#define SSTSS_P2 __REG(0x41700038) /* SSP Port 2 Timeslot Status */ +#define SSACD_P2 __REG(0x4170003C) /* SSP Port 2 Audio Clock Divider */ #define SSCR0_P3 __REG(0x41900000) /* SSP Port 3 Control Register 0 */ #define SSCR1_P3 __REG(0x41900004) /* SSP Port 3 Control Register 1 */ #define SSSR_P3 __REG(0x41900008) /* SSP Port 3 Status Register */ @@ -1720,6 +1728,10 @@ #define SSDR_P3 __REG(0x41900010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */ #define SSTO_P3 __REG(0x41900028) /* SSP Port 3 Time Out Register */ #define SSPSP_P3 __REG(0x4190002C) /* SSP Port 3 Programmable Serial Protocol */ +#define SSTSA_P3 __REG(0x41900030) /* SSP Port 3 Tx Timeslot Active */ +#define SSRSA_P3 __REG(0x41900034) /* SSP Port 3 Rx Timeslot Active */ +#define SSTSS_P3 __REG(0x41900038) /* SSP Port 3 Timeslot Status */ +#define SSACD_P3 __REG(0x4190003C) /* SSP Port 3 Audio Clock Divider */ #else /* PXA255 (only port 2) and PXA26x ports*/ #define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */ #define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */ @@ -1746,6 +1758,10 @@ #define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL)) #define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL)) #define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL)) +#define SSTSA_P(x) (*(((x) == 1) ? &SSTSA_P1 : ((x) == 2) ? &SSTSA_P2 : ((x) == 3) ? &SSTSA_P3 : NULL)) +#define SSRSA_P(x) (*(((x) == 1) ? &SSRSA_P1 : ((x) == 2) ? &SSRSA_P2 : ((x) == 3) ? &SSRSA_P3 : NULL)) +#define SSTSS_P(x) (*(((x) == 1) ? &SSTSS_P1 : ((x) == 2) ? &SSTSS_P2 : ((x) == 3) ? &SSTSS_P3 : NULL)) +#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL)) /* * MultiMediaCard (MMC) controller diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h index 840a46b..1d56a3e 100644 --- a/include/asm-arm/arch-pxa/system.h +++ b/include/asm-arm/arch-pxa/system.h @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <asm/proc-fns.h> #include "hardware.h" #include "pxa-regs.h" diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h index a023b04..ba13a2c 100644 --- a/include/asm-arm/arch-s3c2410/regs-dsc.h +++ b/include/asm-arm/arch-s3c2410/regs-dsc.h @@ -170,7 +170,7 @@ #define S3C2440_DSC1_CS1_4mA (3<<2) #define S3C2440_DSC1_CS1_MASK (3<<2) -#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0 +#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0) #define S3C2440_DSC1_CS0_10mA (0<<0) #define S3C2440_DSC1_CS0_8mA (1<<0) #define S3C2440_DSC1_CS0_6mA (2<<0) diff --git a/include/asm-arm/arch-versatile/system.h b/include/asm-arm/arch-versatile/system.h index 8889a18..71c6254 100644 --- a/include/asm-arm/arch-versatile/system.h +++ b/include/asm-arm/arch-versatile/system.h @@ -36,16 +36,14 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - unsigned int hdr_ctrl = (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_RESETCTL_OFFSET); - unsigned int val; + u32 val; - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - val = __raw_readl(hdr_ctrl); - val |= VERSATILE_SYS_CTRL_RESET_CONFIGCLR; - __raw_writel(val, hdr_ctrl); + val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7; + val |= 0x105; + + __raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK)); + __raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL)); + __raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK)); } #endif diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h index 17eaf8b..e6f7fcd 100644 --- a/include/asm-arm/byteorder.h +++ b/include/asm-arm/byteorder.h @@ -22,16 +22,18 @@ static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) { __u32 t; - if (__builtin_constant_p(x)) { - t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ - } else { +#ifndef __thumb__ + if (!__builtin_constant_p(x)) { /* * The compiler needs a bit of a hint here to always do the * right thing and not screw it up to different degrees * depending on the gcc version. */ asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); - } + } else +#endif + t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ + x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/include/asm-arm/hardware/sharpsl_pm.h index 36983e5..ecf15b8 100644 --- a/include/asm-arm/hardware/sharpsl_pm.h +++ b/include/asm-arm/hardware/sharpsl_pm.h @@ -16,6 +16,7 @@ struct sharpsl_charger_machinfo { void (*exit)(void); int gpio_acin; int gpio_batfull; + int batfull_irq; int gpio_batlock; int gpio_fatal; void (*discharge)(int); @@ -34,9 +35,19 @@ struct sharpsl_charger_machinfo { #define SHARPSL_STATUS_FATAL 7 unsigned long (*charger_wakeup)(void); int (*should_wakeup)(unsigned int resume_on_alarm); + void (*backlight_limit)(int); + int (*backlight_get_status) (void); + int charge_on_volt; + int charge_on_temp; + int charge_acin_high; + int charge_acin_low; + int fatal_acin_volt; + int fatal_noacin_volt; int bat_levels; struct battery_thresh *bat_levels_noac; struct battery_thresh *bat_levels_acin; + struct battery_thresh *bat_levels_noac_bl; + struct battery_thresh *bat_levels_acin_bl; int status_high_acin; int status_low_acin; int status_high_noac; diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h index 60b5105..66e67e6 100644 --- a/include/asm-arm/irq.h +++ b/include/asm-arm/irq.h @@ -47,10 +47,6 @@ void disable_irq_wake(unsigned int irq); void enable_irq_wake(unsigned int irq); int setup_irq(unsigned int, struct irqaction *); -struct irqaction; -struct pt_regs; -int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *); - extern void migrate_irqs(void); #endif diff --git a/include/asm-arm/mach/serial_at91rm9200.h b/include/asm-arm/mach/serial_at91.h index a0269de..1290bb3 100644 --- a/include/asm-arm/mach/serial_at91rm9200.h +++ b/include/asm-arm/mach/serial_at91.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/serial_at91rm9200.h + * linux/include/asm-arm/mach/serial_at91.h * * Based on serial_sa1100.h by Nicolas Pitre * @@ -14,7 +14,7 @@ struct uart_port; * This is a temporary structure for registering these * functions; it is intended to be discarded after boot. */ -struct at91rm9200_port_fns { +struct at91_port_fns { void (*set_mctrl)(struct uart_port *, u_int); u_int (*get_mctrl)(struct uart_port *); void (*enable_ms)(struct uart_port *); @@ -25,11 +25,9 @@ struct at91rm9200_port_fns { }; #if defined(CONFIG_SERIAL_AT91) -void at91_register_uart_fns(struct at91rm9200_port_fns *fns); -void at91_register_uart(int idx, int port); +void at91_register_uart_fns(struct at91_port_fns *fns); #else #define at91_register_uart_fns(fns) do { } while (0) -#define at91_register_uart(idx,port) do { } while (0) #endif diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index 9c744ae..6001feb 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -107,6 +107,9 @@ extern void __show_regs(struct pt_regs *); extern int cpu_architecture(void); extern void cpu_init(void); +void arm_machine_restart(char mode); +extern void (*arm_pm_restart)(char str); + /* * Intel's XScale3 core supports some v6 features (supersections, L2) * but advertises itself as v5 as it does not support the v6 ISA. For diff --git a/include/asm-arm/thread_notify.h b/include/asm-arm/thread_notify.h new file mode 100644 index 0000000..8866e52 --- /dev/null +++ b/include/asm-arm/thread_notify.h @@ -0,0 +1,48 @@ +/* + * linux/include/asm-arm/thread_notify.h + * + * Copyright (C) 2006 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_THREAD_NOTIFY_H +#define ASMARM_THREAD_NOTIFY_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +#include <linux/notifier.h> +#include <asm/thread_info.h> + +static inline int thread_register_notifier(struct notifier_block *n) +{ + extern struct atomic_notifier_head thread_notify_head; + return atomic_notifier_chain_register(&thread_notify_head, n); +} + +static inline void thread_unregister_notifier(struct notifier_block *n) +{ + extern struct atomic_notifier_head thread_notify_head; + atomic_notifier_chain_unregister(&thread_notify_head, n); +} + +static inline void thread_notify(unsigned long rc, struct thread_info *thread) +{ + extern struct atomic_notifier_head thread_notify_head; + atomic_notifier_call_chain(&thread_notify_head, rc, thread); +} + +#endif + +/* + * These are the reason codes for the thread notifier. + */ +#define THREAD_NOTIFY_FLUSH 0 +#define THREAD_NOTIFY_RELEASE 1 +#define THREAD_NOTIFY_SWITCH 2 + +#endif +#endif diff --git a/include/asm-arm/vga.h b/include/asm-arm/vga.h index 926e5ee..1e0b913 100644 --- a/include/asm-arm/vga.h +++ b/include/asm-arm/vga.h @@ -4,7 +4,7 @@ #include <asm/hardware.h> #include <asm/io.h> -#define VGA_MAP_MEM(x) (PCIMEM_BASE + (x)) +#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x)) #define vga_readb(x) (*((volatile unsigned char *)x)) #define vga_writeb(x,y) (*((volatile unsigned char *)y) = (x)) |