diff options
Diffstat (limited to 'include/asm-arm/arch-pxa/mainstone.h')
| -rw-r--r-- | include/asm-arm/arch-pxa/mainstone.h | 120 |
1 files changed, 120 insertions, 0 deletions
diff --git a/include/asm-arm/arch-pxa/mainstone.h b/include/asm-arm/arch-pxa/mainstone.h new file mode 100644 index 0000000..14c862a --- /dev/null +++ b/include/asm-arm/arch-pxa/mainstone.h @@ -0,0 +1,120 @@ +/* + * linux/include/asm-arm/arch-pxa/mainstone.h + * + * Author: Nicolas Pitre + * Created: Nov 14, 2002 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ASM_ARCH_MAINSTONE_H +#define ASM_ARCH_MAINSTONE_H + +#define MST_ETH_PHYS PXA_CS4_PHYS + +#define MST_FPGA_PHYS PXA_CS2_PHYS +#define MST_FPGA_VIRT (0xf0000000) +#define MST_P2V(x) ((x) - MST_FPGA_PHYS + MST_FPGA_VIRT) +#define MST_V2P(x) ((x) - MST_FPGA_VIRT + MST_FPGA_PHYS) + +#ifndef __ASSEMBLY__ +# define __MST_REG(x) (*((volatile unsigned long *)MST_P2V(x))) +#else +# define __MST_REG(x) MST_P2V(x) +#endif + +/* board level registers in the FPGA */ + +#define MST_LEDDAT1 __MST_REG(0x08000010) +#define MST_LEDDAT2 __MST_REG(0x08000014) +#define MST_LEDCTRL __MST_REG(0x08000040) +#define MST_GPSWR __MST_REG(0x08000060) +#define MST_MSCWR1 __MST_REG(0x08000080) +#define MST_MSCWR2 __MST_REG(0x08000084) +#define MST_MSCWR3 __MST_REG(0x08000088) +#define MST_MSCRD __MST_REG(0x08000090) +#define MST_INTMSKENA __MST_REG(0x080000c0) +#define MST_INTSETCLR __MST_REG(0x080000d0) +#define MST_PCMCIA0 __MST_REG(0x080000e0) +#define MST_PCMCIA1 __MST_REG(0x080000e4) + +#define MST_MSCWR1_CAMERA_ON (1 << 15) /* Camera interface power control */ +#define MST_MSCWR1_CAMERA_SEL (1 << 14) /* Camera interface mux control */ +#define MST_MSCWR1_LCD_CTL (1 << 13) /* General-purpose LCD control */ +#define MST_MSCWR1_MS_ON (1 << 12) /* Memory Stick power control */ +#define MST_MSCWR1_MMC_ON (1 << 11) /* MultiMediaCard* power control */ +#define MST_MSCWR1_MS_SEL (1 << 10) /* SD/MS multiplexer control */ +#define MST_MSCWR1_BB_SEL (1 << 9) /* PCMCIA/Baseband multiplexer */ +#define MST_MSCWR1_BT_ON (1 << 8) /* Bluetooth UART transceiver */ +#define MST_MSCWR1_BTDTR (1 << 7) /* Bluetooth UART DTR */ + +#define MST_MSCWR1_IRDA_MASK (3 << 5) /* IrDA transceiver mode */ +#define MST_MSCWR1_IRDA_FULL (0 << 5) /* full distance power */ +#define MST_MSCWR1_IRDA_OFF (1 << 5) /* shutdown */ +#define MST_MSCWR1_IRDA_MED (2 << 5) /* 2/3 distance power */ +#define MST_MSCWR1_IRDA_LOW (3 << 5) /* 1/3 distance power */ + +#define MST_MSCWR1_IRDA_FIR (1 << 4) /* IrDA transceiver SIR/FIR */ +#define MST_MSCWR1_GREENLED (1 << 3) /* LED D1 control */ +#define MST_MSCWR1_PDC_CTL (1 << 2) /* reserved */ +#define MST_MSCWR1_MTR_ON (1 << 1) /* Silent alert motor */ +#define MST_MSCWR1_SYSRESET (1 << 0) /* System reset */ + +#define MST_MSCWR2_USB_OTG_RST (1 << 6) /* USB On The Go reset */ +#define MST_MSCWR2_USB_OTG_SEL (1 << 5) /* USB On The Go control */ +#define MST_MSCWR2_nUSBC_SC (1 << 4) /* USB client soft connect control */ +#define MST_MSCWR2_I2S_SPKROFF (1 << 3) /* I2S CODEC amplifier control */ +#define MST_MSCWR2_AC97_SPKROFF (1 << 2) /* AC97 CODEC amplifier control */ +#define MST_MSCWR2_RADIO_PWR (1 << 1) /* Radio module power control */ +#define MST_MSCWR2_RADIO_WAKE (1 << 0) /* Radio module wake-up signal */ + +#define MST_MSCWR3_GPIO_RESET_EN (1 << 2) /* Enable GPIO Reset */ +#define MST_MSCWR3_GPIO_RESET (1 << 1) /* Initiate a GPIO Reset */ +#define MST_MSCWR3_COMMS_SW_RESET (1 << 0) /* Communications Processor Reset Control */ + +#define MST_MSCRD_nPENIRQ (1 << 9) /* ADI7873* nPENIRQ signal */ +#define MST_MSCRD_nMEMSTK_CD (1 << 8) /* Memory Stick detection signal */ +#define MST_MSCRD_nMMC_CD (1 << 7) /* SD/MMC card detection signal */ +#define MST_MSCRD_nUSIM_CD (1 << 6) /* USIM card detection signal */ +#define MST_MSCRD_USB_CBL (1 << 5) /* USB client cable status */ +#define MST_MSCRD_TS_BUSY (1 << 4) /* ADI7873 busy */ +#define MST_MSCRD_BTDSR (1 << 3) /* Bluetooth UART DSR */ +#define MST_MSCRD_BTRI (1 << 2) /* Bluetooth UART Ring Indicator */ +#define MST_MSCRD_BTDCD (1 << 1) /* Bluetooth UART DCD */ +#define MST_MSCRD_nMMC_WP (1 << 0) /* SD/MMC write-protect status */ + +#define MST_INT_S1_IRQ (1 << 15) /* PCMCIA socket 1 IRQ */ +#define MST_INT_S1_STSCHG (1 << 14) /* PCMCIA socket 1 status changed */ +#define MST_INT_S1_CD (1 << 13) /* PCMCIA socket 1 card detection */ +#define MST_INT_S0_IRQ (1 << 11) /* PCMCIA socket 0 IRQ */ +#define MST_INT_S0_STSCHG (1 << 10) /* PCMCIA socket 0 status changed */ +#define MST_INT_S0_CD (1 << 9) /* PCMCIA socket 0 card detection */ +#define MST_INT_nEXBRD_INT (1 << 7) /* Expansion board IRQ */ +#define MST_INT_MSINS (1 << 6) /* Memory Stick* detection */ +#define MST_INT_PENIRQ (1 << 5) /* ADI7873* touch-screen IRQ */ +#define MST_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ +#define MST_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ +#define MST_INT_USBC (1 << 2) /* USB client cable detection IRQ */ +#define MST_INT_USIM (1 << 1) /* USIM card detection IRQ */ +#define MST_INT_MMC (1 << 0) /* MMC/SD card detection IRQ */ + +#define MST_PCMCIA_nIRQ (1 << 10) /* IRQ / ready signal */ +#define MST_PCMCIA_nSPKR_BVD2 (1 << 9) /* VDD sense / digital speaker */ +#define MST_PCMCIA_nSTSCHG_BVD1 (1 << 8) /* VDD sense / card status changed */ +#define MST_PCMCIA_nVS2 (1 << 7) /* VSS voltage sense */ +#define MST_PCMCIA_nVS1 (1 << 6) /* VSS voltage sense */ +#define MST_PCMCIA_nCD (1 << 5) /* Card detection signal */ +#define MST_PCMCIA_RESET (1 << 4) /* Card reset signal */ +#define MST_PCMCIA_PWR_MASK (0x000f) /* MAX1602 power-supply controls */ + +#define MST_PCMCIA_PWR_VPP_0 0x0 /* voltage VPP = 0V */ +#define MST_PCMCIA_PWR_VPP_120 0x2 /* voltage VPP = 12V*/ +#define MST_PCMCIA_PWR_VPP_VCC 0x1 /* voltage VPP = VCC */ +#define MST_PCMCIA_PWR_VCC_0 0x0 /* voltage VCC = 0V */ +#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */ +#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */ + +#endif |
