1 files changed, 0 insertions, 100 deletions
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
deleted file mode 100644
index bb31b315..0000000
--- a/include/asm-arm/arch-kirkwood/kirkwood.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/kirkwood.h
- *
- * Generic definitions for Marvell Kirkwood SoC flavors:
- *  88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_KIRKWOOD_H
-#define __ASM_ARCH_KIRKWOOD_H
-
-/*
- * Marvell Kirkwood address maps.
- *
- * phys
- * e0000000	PCIe Memory space
- * f1000000	on-chip peripheral registers
- * f2000000	PCIe I/O space
- * f3000000	NAND controller address window
- *
- * virt		phys		size
- * fee00000	f1000000	1M	on-chip peripheral registers
- * fef00000	f2000000	1M	PCIe I/O space
- */
-
-#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
-#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
-						* is the minimal window size
-						*/
-
-#define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
-#define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
-
-#define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE		0xfee00000
-#define KIRKWOOD_REGS_SIZE		SZ_1M
-
-#define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
-#define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
-
-/*
- * MBUS bridge registers.
- */
-#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define   CPU_RESET		0x00000002
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_LOW_OFF	0x0000
-#define   IRQ_MASK_LOW_OFF	0x0004
-#define   IRQ_CAUSE_HIGH_OFF	0x0010
-#define   IRQ_MASK_HIGH_OFF	0x0014
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-#define  L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
-#define   L2_WRITETHROUGH	0x00000010
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
-
-#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
-#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
-#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-
-#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-
-#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-
-#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-
-#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-
-
-#define GPIO_MAX		50
-
-
-#endif