diff options
Diffstat (limited to 'include/asm-arm/arch-ixp2000/platform.h')
| -rw-r--r-- | include/asm-arm/arch-ixp2000/platform.h | 152 |
1 files changed, 0 insertions, 152 deletions
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h deleted file mode 100644 index a66317a..0000000 --- a/include/asm-arm/arch-ixp2000/platform.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/platform.h - * - * Various bits of code used by platform-level code. - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - -#ifndef __ASSEMBLY__ - -static inline unsigned long ixp2000_reg_read(volatile void *reg) -{ - return *((volatile unsigned long *)reg); -} - -static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -/* - * On the IXP2400, we can't use XCB=000 due to chip bugs. We use - * XCB=101 instead, but that makes all I/O accesses bufferable. This - * is not a problem in general, but we do have to be slightly more - * careful because I/O writes are no longer automatically flushed out - * of the write buffer. - * - * In cases where we want to make sure that a write has been flushed - * out of the write buffer before we proceed, for example when masking - * a device interrupt before re-enabling IRQs in CPSR, we can use this - * function, ixp2000_reg_wrb, which performs a write, a readback, and - * issues a dummy instruction dependent on the value of the readback - * (mov rX, rX) to make sure that the readback has completed before we - * continue. - */ -static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) -{ - unsigned long dummy; - - *((volatile unsigned long *)reg) = val; - - dummy = *((volatile unsigned long *)reg); - __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); -} - -/* - * Boards may multiplex different devices on the 2nd channel of - * the slowport interface that each need different configuration - * settings. For example, the IXDP2400 uses channel 2 on the interface - * to access the CPLD, the switch fabric card, and the media card. Each - * one needs a different mode so drivers must save/restore the mode - * before and after each operation. - * - * acquire_slowport(&your_config); - * ... - * do slowport operations - * ... - * release_slowport(); - * - * Note that while you have the slowport, you are holding a spinlock, - * so your code should be written as if you explicitly acquired a lock. - * - * The configuration only affects device 2 on the slowport, so the - * MTD map driver does not acquire/release the slowport. - */ -struct slowport_cfg { - unsigned long CCR; /* Clock divide */ - unsigned long WTC; /* Write Timing Control */ - unsigned long RTC; /* Read Timing Control */ - unsigned long PCR; /* Protocol Control Register */ - unsigned long ADC; /* Address/Data Width Control */ -}; - - -void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *); -void ixp2000_release_slowport(struct slowport_cfg *); - -/* - * IXP2400 A0/A1 and IXP2800 A0/A1/A2 have broken slowport that requires - * tweaking of addresses in the MTD driver. - */ -static inline unsigned ixp2000_has_broken_slowport(void) -{ - unsigned long id = *IXP2000_PRODUCT_ID; - unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK | - IXP2000_MIN_PROD_TYPE_MASK); - return (((id_prod == - /* fixed in IXP2400-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2400)) && - ((id & IXP2000_MAJ_REV_MASK) == 0)) || - ((id_prod == - /* fixed in IXP2800-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2800)) && - ((id & IXP2000_MAJ_REV_MASK) == 0)) || - ((id_prod == - /* fixed in IXP2850-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2850)) && - ((id & IXP2000_MAJ_REV_MASK) == 0))); -} - -static inline unsigned int ixp2000_has_flash(void) -{ - return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM)); -} - -static inline unsigned int ixp2000_is_pcimaster(void) -{ - return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST)); -} - -void ixp2000_map_io(void); -void ixp2000_uart_init(void); -void ixp2000_init_irq(void); -void ixp2000_init_time(unsigned long); -unsigned long ixp2000_gettimeoffset(void); - -struct pci_sys_data; - -u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where); -void ixp2000_pci_preinit(void); -int ixp2000_pci_setup(int, struct pci_sys_data*); -struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*); -int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *); -int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32); - -/* - * Several of the IXP2000 systems have banked flash so we need to extend the - * flash_platform_data structure with some private pointers - */ -struct ixp2000_flash_data { - struct flash_platform_data *platform_data; - int nr_banks; - unsigned long (*bank_setup)(unsigned long); -}; - -struct ixp2000_i2c_pins { - unsigned long sda_pin; - unsigned long scl_pin; -}; - - -#endif /* !__ASSEMBLY__ */ |
