diff options
Diffstat (limited to 'fs/partitions/ldm.c')
| -rw-r--r-- | fs/partitions/ldm.c | 89 |
1 files changed, 44 insertions, 45 deletions
diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c index 8652fb9..3ceca05 100644 --- a/fs/partitions/ldm.c +++ b/fs/partitions/ldm.c @@ -309,7 +309,7 @@ static bool ldm_compare_tocblocks (const struct tocblock *toc1, /** * ldm_validate_privheads - Compare the primary privhead with its backups - * @bdev: Device holding the LDM Database + * @state: Partition check state including device holding the LDM Database * @ph1: Memory struct to fill with ph contents * * Read and compare all three privheads from disk. @@ -321,8 +321,8 @@ static bool ldm_compare_tocblocks (const struct tocblock *toc1, * Return: 'true' Success * 'false' Error */ -static bool ldm_validate_privheads (struct block_device *bdev, - struct privhead *ph1) +static bool ldm_validate_privheads(struct parsed_partitions *state, + struct privhead *ph1) { static const int off[3] = { OFF_PRIV1, OFF_PRIV2, OFF_PRIV3 }; struct privhead *ph[3] = { ph1 }; @@ -332,7 +332,7 @@ static bool ldm_validate_privheads (struct block_device *bdev, long num_sects; int i; - BUG_ON (!bdev || !ph1); + BUG_ON (!state || !ph1); ph[1] = kmalloc (sizeof (*ph[1]), GFP_KERNEL); ph[2] = kmalloc (sizeof (*ph[2]), GFP_KERNEL); @@ -346,8 +346,8 @@ static bool ldm_validate_privheads (struct block_device *bdev, /* Read and parse privheads */ for (i = 0; i < 3; i++) { - data = read_dev_sector (bdev, - ph[0]->config_start + off[i], §); + data = read_part_sector(state, ph[0]->config_start + off[i], + §); if (!data) { ldm_crit ("Disk read failed."); goto out; @@ -363,7 +363,7 @@ static bool ldm_validate_privheads (struct block_device *bdev, } } - num_sects = bdev->bd_inode->i_size >> 9; + num_sects = state->bdev->bd_inode->i_size >> 9; if ((ph[0]->config_start > num_sects) || ((ph[0]->config_start + ph[0]->config_size) > num_sects)) { @@ -397,20 +397,20 @@ out: /** * ldm_validate_tocblocks - Validate the table of contents and its backups - * @bdev: Device holding the LDM Database - * @base: Offset, into @bdev, of the database + * @state: Partition check state including device holding the LDM Database + * @base: Offset, into @state->bdev, of the database * @ldb: Cache of the database structures * * Find and compare the four tables of contents of the LDM Database stored on - * @bdev and return the parsed information into @toc1. + * @state->bdev and return the parsed information into @toc1. * * The offsets and sizes of the configs are range-checked against a privhead. * * Return: 'true' @toc1 contains validated TOCBLOCK info * 'false' @toc1 contents are undefined */ -static bool ldm_validate_tocblocks(struct block_device *bdev, - unsigned long base, struct ldmdb *ldb) +static bool ldm_validate_tocblocks(struct parsed_partitions *state, + unsigned long base, struct ldmdb *ldb) { static const int off[4] = { OFF_TOCB1, OFF_TOCB2, OFF_TOCB3, OFF_TOCB4}; struct tocblock *tb[4]; @@ -420,7 +420,7 @@ static bool ldm_validate_tocblocks(struct block_device *bdev, int i, nr_tbs; bool result = false; - BUG_ON(!bdev || !ldb); + BUG_ON(!state || !ldb); ph = &ldb->ph; tb[0] = &ldb->toc; tb[1] = kmalloc(sizeof(*tb[1]) * 3, GFP_KERNEL); @@ -437,7 +437,7 @@ static bool ldm_validate_tocblocks(struct block_device *bdev, * skip any that fail as long as we get at least one valid TOCBLOCK. */ for (nr_tbs = i = 0; i < 4; i++) { - data = read_dev_sector(bdev, base + off[i], §); + data = read_part_sector(state, base + off[i], §); if (!data) { ldm_error("Disk read failed for TOCBLOCK %d.", i); continue; @@ -473,7 +473,7 @@ err: /** * ldm_validate_vmdb - Read the VMDB and validate it - * @bdev: Device holding the LDM Database + * @state: Partition check state including device holding the LDM Database * @base: Offset, into @bdev, of the database * @ldb: Cache of the database structures * @@ -483,8 +483,8 @@ err: * Return: 'true' @ldb contains validated VBDB info * 'false' @ldb contents are undefined */ -static bool ldm_validate_vmdb (struct block_device *bdev, unsigned long base, - struct ldmdb *ldb) +static bool ldm_validate_vmdb(struct parsed_partitions *state, + unsigned long base, struct ldmdb *ldb) { Sector sect; u8 *data; @@ -492,12 +492,12 @@ static bool ldm_validate_vmdb (struct block_device *bdev, unsigned long base, struct vmdb *vm; struct tocblock *toc; - BUG_ON (!bdev || !ldb); + BUG_ON (!state || !ldb); vm = &ldb->vm; toc = &ldb->toc; - data = read_dev_sector (bdev, base + OFF_VMDB, §); + data = read_part_sector(state, base + OFF_VMDB, §); if (!data) { ldm_crit ("Disk read failed."); return false; @@ -534,21 +534,21 @@ out: /** * ldm_validate_partition_table - Determine whether bdev might be a dynamic disk - * @bdev: Device holding the LDM Database + * @state: Partition check state including device holding the LDM Database * * This function provides a weak test to decide whether the device is a dynamic * disk or not. It looks for an MS-DOS-style partition table containing at * least one partition of type 0x42 (formerly SFS, now used by Windows for * dynamic disks). * - * N.B. The only possible error can come from the read_dev_sector and that is + * N.B. The only possible error can come from the read_part_sector and that is * only likely to happen if the underlying device is strange. If that IS * the case we should return zero to let someone else try. * - * Return: 'true' @bdev is a dynamic disk - * 'false' @bdev is not a dynamic disk, or an error occurred + * Return: 'true' @state->bdev is a dynamic disk + * 'false' @state->bdev is not a dynamic disk, or an error occurred */ -static bool ldm_validate_partition_table (struct block_device *bdev) +static bool ldm_validate_partition_table(struct parsed_partitions *state) { Sector sect; u8 *data; @@ -556,9 +556,9 @@ static bool ldm_validate_partition_table (struct block_device *bdev) int i; bool result = false; - BUG_ON (!bdev); + BUG_ON(!state); - data = read_dev_sector (bdev, 0, §); + data = read_part_sector(state, 0, §); if (!data) { ldm_crit ("Disk read failed."); return false; @@ -1391,8 +1391,8 @@ static bool ldm_frag_commit (struct list_head *frags, struct ldmdb *ldb) /** * ldm_get_vblks - Read the on-disk database of VBLKs into memory - * @bdev: Device holding the LDM Database - * @base: Offset, into @bdev, of the database + * @state: Partition check state including device holding the LDM Database + * @base: Offset, into @state->bdev, of the database * @ldb: Cache of the database structures * * To use the information from the VBLKs, they need to be read from the disk, @@ -1401,8 +1401,8 @@ static bool ldm_frag_commit (struct list_head *frags, struct ldmdb *ldb) * Return: 'true' All the VBLKs were read successfully * 'false' An error occurred */ -static bool ldm_get_vblks (struct block_device *bdev, unsigned long base, - struct ldmdb *ldb) +static bool ldm_get_vblks(struct parsed_partitions *state, unsigned long base, + struct ldmdb *ldb) { int size, perbuf, skip, finish, s, v, recs; u8 *data = NULL; @@ -1410,7 +1410,7 @@ static bool ldm_get_vblks (struct block_device *bdev, unsigned long base, bool result = false; LIST_HEAD (frags); - BUG_ON (!bdev || !ldb); + BUG_ON(!state || !ldb); size = ldb->vm.vblk_size; perbuf = 512 / size; @@ -1418,7 +1418,7 @@ static bool ldm_get_vblks (struct block_device *bdev, unsigned long base, finish = (size * ldb->vm.last_vblk_seq) >> 9; for (s = skip; s < finish; s++) { /* For each sector */ - data = read_dev_sector (bdev, base + OFF_VMDB + s, §); + data = read_part_sector(state, base + OFF_VMDB + s, §); if (!data) { ldm_crit ("Disk read failed."); goto out; @@ -1474,8 +1474,7 @@ static void ldm_free_vblks (struct list_head *lh) /** * ldm_partition - Find out whether a device is a dynamic disk and handle it - * @pp: List of the partitions parsed so far - * @bdev: Device holding the LDM Database + * @state: Partition check state including device holding the LDM Database * * This determines whether the device @bdev is a dynamic disk and if so creates * the partitions necessary in the gendisk structure pointed to by @hd. @@ -1485,21 +1484,21 @@ static void ldm_free_vblks (struct list_head *lh) * example, if the device is hda, we would have: hda1: LDM database, hda2, hda3, * and so on: the actual data containing partitions. * - * Return: 1 Success, @bdev is a dynamic disk and we handled it - * 0 Success, @bdev is not a dynamic disk + * Return: 1 Success, @state->bdev is a dynamic disk and we handled it + * 0 Success, @state->bdev is not a dynamic disk * -1 An error occurred before enough information had been read - * Or @bdev is a dynamic disk, but it may be corrupted + * Or @state->bdev is a dynamic disk, but it may be corrupted */ -int ldm_partition (struct parsed_partitions *pp, struct block_device *bdev) +int ldm_partition(struct parsed_partitions *state) { struct ldmdb *ldb; unsigned long base; int result = -1; - BUG_ON (!pp || !bdev); + BUG_ON(!state); /* Look for signs of a Dynamic Disk */ - if (!ldm_validate_partition_table (bdev)) + if (!ldm_validate_partition_table(state)) return 0; ldb = kmalloc (sizeof (*ldb), GFP_KERNEL); @@ -1509,15 +1508,15 @@ int ldm_partition (struct parsed_partitions *pp, struct block_device *bdev) } /* Parse and check privheads. */ - if (!ldm_validate_privheads (bdev, &ldb->ph)) + if (!ldm_validate_privheads(state, &ldb->ph)) goto out; /* Already logged */ /* All further references are relative to base (database start). */ base = ldb->ph.config_start; /* Parse and check tocs and vmdb. */ - if (!ldm_validate_tocblocks (bdev, base, ldb) || - !ldm_validate_vmdb (bdev, base, ldb)) + if (!ldm_validate_tocblocks(state, base, ldb) || + !ldm_validate_vmdb(state, base, ldb)) goto out; /* Already logged */ /* Initialize vblk lists in ldmdb struct */ @@ -1527,13 +1526,13 @@ int ldm_partition (struct parsed_partitions *pp, struct block_device *bdev) INIT_LIST_HEAD (&ldb->v_comp); INIT_LIST_HEAD (&ldb->v_part); - if (!ldm_get_vblks (bdev, base, ldb)) { + if (!ldm_get_vblks(state, base, ldb)) { ldm_crit ("Failed to read the VBLKs from the database."); goto cleanup; } /* Finally, create the data partition devices. */ - if (ldm_create_data_partitions (pp, ldb)) { + if (ldm_create_data_partitions(state, ldb)) { ldm_debug ("Parsed LDM database successfully."); result = 1; } |
