summaryrefslogtreecommitdiffstats
path: root/fs/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'fs/Kconfig')
-rw-r--r--fs/Kconfig1729
1 files changed, 1729 insertions, 0 deletions
diff --git a/fs/Kconfig b/fs/Kconfig
new file mode 100644
index 0000000..6a4ad4b
--- /dev/null
+++ b/fs/Kconfig
@@ -0,0 +1,1729 @@
+#
+# File system configuration
+#
+
+menu "File systems"
+
+config EXT2_FS
+ tristate "Second extended fs support"
+ help
+ Ext2 is a standard Linux file system for hard disks.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called ext2. Be aware however that the file system
+ of your root partition (the one containing the directory /) cannot
+ be compiled as a module, and so this could be dangerous.
+
+ If unsure, say Y.
+
+config EXT2_FS_XATTR
+ bool "Ext2 extended attributes"
+ depends on EXT2_FS
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+config EXT2_FS_POSIX_ACL
+ bool "Ext2 POSIX Access Control Lists"
+ depends on EXT2_FS_XATTR
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the Posix ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config EXT2_FS_SECURITY
+ bool "Ext2 Security Labels"
+ depends on EXT2_FS_XATTR
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the ext2 filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
+
+config EXT3_FS
+ tristate "Ext3 journalling file system support"
+ help
+ This is the journaling version of the Second extended file system
+ (often called ext3), the de facto standard Linux file system
+ (method to organize files on a storage device) for hard disks.
+
+ The journaling code included in this driver means you do not have
+ to run e2fsck (file system checker) on your file systems after a
+ crash. The journal keeps track of any changes that were being made
+ at the time the system crashed, and can ensure that your file system
+ is consistent without the need for a lengthy check.
+
+ Other than adding the journal to the file system, the on-disk format
+ of ext3 is identical to ext2. It is possible to freely switch
+ between using the ext3 driver and the ext2 driver, as long as the
+ file system has been cleanly unmounted, or e2fsck is run on the file
+ system.
+
+ To add a journal on an existing ext2 file system or change the
+ behavior of ext3 file systems, you can use the tune2fs utility ("man
+ tune2fs"). To modify attributes of files and directories on ext3
+ file systems, use chattr ("man chattr"). You need to be using
+ e2fsprogs version 1.20 or later in order to create ext3 journals
+ (available at <http://sourceforge.net/projects/e2fsprogs/>).
+
+ To compile this file system support as a module, choose M here: the
+ module will be called ext3. Be aware however that the file system
+ of your root partition (the one containing the directory /) cannot
+ be compiled as a module, and so this may be dangerous.
+
+config EXT3_FS_XATTR
+ bool "Ext3 extended attributes"
+ depends on EXT3_FS
+ default y
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+ You need this for POSIX ACL support on ext3.
+
+config EXT3_FS_POSIX_ACL
+ bool "Ext3 POSIX Access Control Lists"
+ depends on EXT3_FS_XATTR
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the Posix ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config EXT3_FS_SECURITY
+ bool "Ext3 Security Labels"
+ depends on EXT3_FS_XATTR
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the ext3 filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
+
+config JBD
+# CONFIG_JBD could be its own option (even modular), but until there are
+# other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS
+# dep_tristate ' Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS
+ tristate
+ default EXT3_FS
+ help
+ This is a generic journaling layer for block devices. It is
+ currently used by the ext3 file system, but it could also be used to
+ add journal support to other file systems or block devices such as
+ RAID or LVM.
+
+ If you are using the ext3 file system, you need to say Y here. If
+ you are not using ext3 then you will probably want to say N.
+
+ To compile this device as a module, choose M here: the module will be
+ called jbd. If you are compiling ext3 into the kernel, you cannot
+ compile this code as a module.
+
+config JBD_DEBUG
+ bool "JBD (ext3) debugging support"
+ depends on JBD
+ help
+ If you are using the ext3 journaled file system (or potentially any
+ other file system/device using JBD), this option allows you to
+ enable debugging output while the system is running, in order to
+ help track down any problems you are having. By default the
+ debugging output will be turned off.
+
+ If you select Y here, then you will be able to turn on debugging
+ with "echo N > /proc/sys/fs/jbd-debug", where N is a number between
+ 1 and 5, the higher the number, the more debugging output is
+ generated. To turn debugging off again, do
+ "echo 0 > /proc/sys/fs/jbd-debug".
+
+config FS_MBCACHE
+# Meta block cache for Extended Attributes (ext2/ext3)
+ tristate
+ depends on EXT2_FS_XATTR || EXT3_FS_XATTR
+ default y if EXT2_FS=y || EXT3_FS=y
+ default m if EXT2_FS=m || EXT3_FS=m
+
+config REISERFS_FS
+ tristate "Reiserfs support"
+ help
+ Stores not just filenames but the files themselves in a balanced
+ tree. Uses journaling.
+
+ Balanced trees are more efficient than traditional file system
+ architectural foundations.
+
+ In general, ReiserFS is as fast as ext2, but is very efficient with
+ large directories and small files. Additional patches are needed
+ for NFS and quotas, please see <http://www.namesys.com/> for links.
+
+ It is more easily extended to have features currently found in
+ database and keyword search systems than block allocation based file
+ systems are. The next version will be so extended, and will support
+ plugins consistent with our motto ``It takes more than a license to
+ make source code open.''
+
+ Read <http://www.namesys.com/> to learn more about reiserfs.
+
+ Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
+
+ If you like it, you can pay us to add new features to it that you
+ need, buy a support contract, or pay us to port it to another OS.
+
+config REISERFS_CHECK
+ bool "Enable reiserfs debug mode"
+ depends on REISERFS_FS
+ help
+ If you set this to Y, then ReiserFS will perform every check it can
+ possibly imagine of its internal consistency throughout its
+ operation. It will also go substantially slower. More than once we
+ have forgotten that this was on, and then gone despondent over the
+ latest benchmarks.:-) Use of this option allows our team to go all
+ out in checking for consistency when debugging without fear of its
+ effect on end users. If you are on the verge of sending in a bug
+ report, say Y and you might get a useful error message. Almost
+ everyone should say N.
+
+config REISERFS_PROC_INFO
+ bool "Stats in /proc/fs/reiserfs"
+ depends on REISERFS_FS
+ help
+ Create under /proc/fs/reiserfs a hierarchy of files, displaying
+ various ReiserFS statistics and internal data at the expense of
+ making your kernel or module slightly larger (+8 KB). This also
+ increases the amount of kernel memory required for each mount.
+ Almost everyone but ReiserFS developers and people fine-tuning
+ reiserfs or tracing problems should say N.
+
+config REISERFS_FS_XATTR
+ bool "ReiserFS extended attributes"
+ depends on REISERFS_FS
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+config REISERFS_FS_POSIX_ACL
+ bool "ReiserFS POSIX Access Control Lists"
+ depends on REISERFS_FS_XATTR
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the Posix ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config REISERFS_FS_SECURITY
+ bool "ReiserFS Security Labels"
+ depends on REISERFS_FS_XATTR
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the ReiserFS filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
+
+config JFS_FS
+ tristate "JFS filesystem support"
+ select NLS
+ help
+ This is a port of IBM's Journaled Filesystem . More information is
+ available in the file <file:Documentation/filesystems/jfs.txt>.
+
+ If you do not intend to use the JFS filesystem, say N.
+
+config JFS_POSIX_ACL
+ bool "JFS POSIX Access Control Lists"
+ depends on JFS_FS
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the Posix ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config JFS_SECURITY
+ bool "JFS Security Labels"
+ depends on JFS_FS
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the jfs filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
+
+config JFS_DEBUG
+ bool "JFS debugging"
+ depends on JFS_FS
+ help
+ If you are experiencing any problems with the JFS filesystem, say
+ Y here. This will result in additional debugging messages to be
+ written to the system log. Under normal circumstances, this
+ results in very little overhead.
+
+config JFS_STATISTICS
+ bool "JFS statistics"
+ depends on JFS_FS
+ help
+ Enabling this option will cause statistics from the JFS file system
+ to be made available to the user in the /proc/fs/jfs/ directory.
+
+config FS_POSIX_ACL
+# Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs)
+#
+# NOTE: you can implement Posix ACLs without these helpers (XFS does).
+# Never use this symbol for ifdefs.
+#
+ bool
+ depends on EXT2_FS_POSIX_ACL || EXT3_FS_POSIX_ACL || JFS_POSIX_ACL || REISERFS_FS_POSIX_ACL || NFSD_V4
+ default y
+
+source "fs/xfs/Kconfig"
+
+config MINIX_FS
+ tristate "Minix fs support"
+ help
+ Minix is a simple operating system used in many classes about OS's.
+ The minix file system (method to organize files on a hard disk
+ partition or a floppy disk) was the original file system for Linux,
+ but has been superseded by the second extended file system ext2fs.
+ You don't want to use the minix file system on your hard disk
+ because of certain built-in restrictions, but it is sometimes found
+ on older Linux floppy disks. This option will enlarge your kernel
+ by about 28 KB. If unsure, say N.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called minix. Note that the file system of your root
+ partition (the one containing the directory /) cannot be compiled as
+ a module.
+
+config ROMFS_FS
+ tristate "ROM file system support"
+ ---help---
+ This is a very small read-only file system mainly intended for
+ initial ram disks of installation disks, but it could be used for
+ other read-only media as well. Read
+ <file:Documentation/filesystems/romfs.txt> for details.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called romfs. Note that the file system of your
+ root partition (the one containing the directory /) cannot be a
+ module.
+
+ If you don't know whether you need it, then you don't need it:
+ answer N.
+
+config QUOTA
+ bool "Quota support"
+ help
+ If you say Y here, you will be able to set per user limits for disk
+ usage (also called disk quotas). Currently, it works for the
+ ext2, ext3, and reiserfs file system. ext3 also supports journalled
+ quotas for which you don't need to run quotacheck(8) after an unclean
+ shutdown. You need additional software in order to use quota support
+ (you can download sources from
+ <http://www.sf.net/projects/linuxquota/>). For further details, read
+ the Quota mini-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, or the documentation provided
+ with the quota tools. Probably the quota support is only useful for
+ multi user systems. If unsure, say N.
+
+config QFMT_V1
+ tristate "Old quota format support"
+ depends on QUOTA
+ help
+ This quota format was (is) used by kernels earlier than 2.4.22. If
+ you have quota working and you don't want to convert to new quota
+ format say Y here.
+
+config QFMT_V2
+ tristate "Quota format v2 support"
+ depends on QUOTA
+ help
+ This quota format allows using quotas with 32-bit UIDs/GIDs. If you
+ need this functionality say Y here. Note that you will need recent
+ quota utilities (>= 3.01) for new quota format with this kernel.
+
+config QUOTACTL
+ bool
+ depends on XFS_QUOTA || QUOTA
+ default y
+
+config DNOTIFY
+ bool "Dnotify support" if EMBEDDED
+ default y
+ help
+ Dnotify is a directory-based per-fd file change notification system
+ that uses signals to communicate events to user-space. There exist
+ superior alternatives, but some applications may still rely on
+ dnotify.
+
+ Because of this, if unsure, say Y.
+
+config AUTOFS_FS
+ tristate "Kernel automounter support"
+ help
+ The automounter is a tool to automatically mount remote file systems
+ on demand. This implementation is partially kernel-based to reduce
+ overhead in the already-mounted case; this is unlike the BSD
+ automounter (amd), which is a pure user space daemon.
+
+ To use the automounter you need the user-space tools from the autofs
+ package; you can find the location in <file:Documentation/Changes>.
+ You also want to answer Y to "NFS file system support", below.
+
+ If you want to use the newer version of the automounter with more
+ features, say N here and say Y to "Kernel automounter v4 support",
+ below.
+
+ To compile this support as a module, choose M here: the module will be
+ called autofs.
+
+ If you are not a part of a fairly large, distributed network, you
+ probably do not need an automounter, and can say N here.
+
+config AUTOFS4_FS
+ tristate "Kernel automounter version 4 support (also supports v3)"
+ help
+ The automounter is a tool to automatically mount remote file systems
+ on demand. This implementation is partially kernel-based to reduce
+ overhead in the already-mounted case; this is unlike the BSD
+ automounter (amd), which is a pure user space daemon.
+
+ To use the automounter you need the user-space tools from
+ <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
+ want to answer Y to "NFS file system support", below.
+
+ To compile this support as a module, choose M here: the module will be
+ called autofs4. You will need to add "alias autofs autofs4" to your
+ modules configuration file.
+
+ If you are not a part of a fairly large, distributed network or
+ don't have a laptop which needs to dynamically reconfigure to the
+ local network, you probably do not need an automounter, and can say
+ N here.
+
+menu "CD-ROM/DVD Filesystems"
+
+config ISO9660_FS
+ tristate "ISO 9660 CDROM file system support"
+ help
+ This is the standard file system used on CD-ROMs. It was previously
+ known as "High Sierra File System" and is called "hsfs" on other
+ Unix systems. The so-called Rock-Ridge extensions which allow for
+ long Unix filenames and symbolic links are also supported by this
+ driver. If you have a CD-ROM drive and want to do more with it than
+ just listen to audio CDs and watch its LEDs, say Y (and read
+ <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>), thereby
+ enlarging your kernel by about 27 KB; otherwise say N.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called isofs.
+
+config JOLIET
+ bool "Microsoft Joliet CDROM extensions"
+ depends on ISO9660_FS
+ select NLS
+ help
+ Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
+ which allows for long filenames in unicode format (unicode is the
+ new 16 bit character code, successor to ASCII, which encodes the
+ characters of almost all languages of the world; see
+ <http://www.unicode.org/> for more information). Say Y here if you
+ want to be able to read Joliet CD-ROMs under Linux.
+
+config ZISOFS
+ bool "Transparent decompression extension"
+ depends on ISO9660_FS
+ select ZLIB_INFLATE
+ help
+ This is a Linux-specific extension to RockRidge which lets you store
+ data in compressed form on a CD-ROM and have it transparently
+ decompressed when the CD-ROM is accessed. See
+ <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
+ necessary to create such a filesystem. Say Y here if you want to be
+ able to read such compressed CD-ROMs.
+
+config ZISOFS_FS
+# for fs/nls/Config.in
+ tristate
+ depends on ZISOFS
+ default ISO9660_FS
+
+config UDF_FS
+ tristate "UDF file system support"
+ help
+ This is the new file system used on some CD-ROMs and DVDs. Say Y if
+ you intend to mount DVD discs or CDRW's written in packet mode, or
+ if written to by other UDF utilities, such as DirectCD.
+ Please read <file:Documentation/filesystems/udf.txt>.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called udf.
+
+ If unsure, say N.
+
+config UDF_NLS
+ bool
+ default y
+ depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
+
+endmenu
+
+menu "DOS/FAT/NT Filesystems"
+
+config FAT_FS
+ tristate
+ select NLS
+ help
+ If you want to use one of the FAT-based file systems (the MS-DOS and
+ VFAT (Windows 95) file systems), then you must say Y or M here
+ to include FAT support. You will then be able to mount partitions or
+ diskettes with FAT-based file systems and transparently access the
+ files on them, i.e. MSDOS files will look and behave just like all
+ other Unix files.
+
+ This FAT support is not a file system in itself, it only provides
+ the foundation for the other file systems. You will have to say Y or
+ M to at least one of "MSDOS fs support" or "VFAT fs support" in
+ order to make use of it.
+
+ Another way to read and write MSDOS floppies and hard drive
+ partitions from within Linux (but not transparently) is with the
+ mtools ("man mtools") program suite. You don't need to say Y here in
+ order to do that.
+
+ If you need to move large files on floppies between a DOS and a
+ Linux box, say Y here, mount the floppy under Linux with an MSDOS
+ file system and use GNU tar's M option. GNU tar is a program
+ available for Unix and DOS ("man tar" or "info tar").
+
+ It is now also becoming possible to read and write compressed FAT
+ file systems; read <file:Documentation/filesystems/fat_cvf.txt> for
+ details.
+
+ The FAT support will enlarge your kernel by about 37 KB. If unsure,
+ say Y.
+
+ To compile this as a module, choose M here: the module will be called
+ fat. Note that if you compile the FAT support as a module, you
+ cannot compile any of the FAT-based file systems into the kernel
+ -- they will have to be modules as well.
+
+config MSDOS_FS
+ tristate "MSDOS fs support"
+ select FAT_FS
+ help
+ This allows you to mount MSDOS partitions of your hard drive (unless
+ they are compressed; to access compressed MSDOS partitions under
+ Linux, you can either use the DOS emulator DOSEMU, described in the
+ DOSEMU-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
+ <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
+ intend to use dosemu with a non-compressed MSDOS partition, say Y
+ here) and MSDOS floppies. This means that file access becomes
+ transparent, i.e. the MSDOS files look and behave just like all
+ other Unix files.
+
+ If you have Windows 95 or Windows NT installed on your MSDOS
+ partitions, you should use the VFAT file system (say Y to "VFAT fs
+ support" below), or you will not be able to see the long filenames
+ generated by Windows 95 / Windows NT.
+
+ This option will enlarge your kernel by about 7 KB. If unsure,
+ answer Y. This will only work if you said Y to "DOS FAT fs support"
+ as well. To compile this as a module, choose M here: the module will
+ be called msdos.
+
+config VFAT_FS
+ tristate "VFAT (Windows-95) fs support"
+ select FAT_FS
+ help
+ This option provides support for normal Windows file systems with
+ long filenames. That includes non-compressed FAT-based file systems
+ used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
+ programs from the mtools package.
+
+ The VFAT support enlarges your kernel by about 10 KB and it only
+ works if you said Y to the "DOS FAT fs support" above. Please read
+ the file <file:Documentation/filesystems/vfat.txt> for details. If
+ unsure, say Y.
+
+ To compile this as a module, choose M here: the module will be called
+ vfat.
+
+config FAT_DEFAULT_CODEPAGE
+ int "Default codepage for FAT"
+ depends on MSDOS_FS || VFAT_FS
+ default 437
+ help
+ This option should be set to the codepage of your FAT filesystems.
+ It can be overridden with the "codepage" mount option.
+ See <file:Documentation/filesystems/vfat.txt> for more information.
+
+config FAT_DEFAULT_IOCHARSET
+ string "Default iocharset for FAT"
+ depends on VFAT_FS
+ default "iso8859-1"
+ help
+ Set this to the default input/output character set you'd
+ like FAT to use. It should probably match the character set
+ that most of your FAT filesystems use, and can be overridden
+ with the "iocharset" mount option for FAT filesystems.
+ Note that "utf8" is not recommended for FAT filesystems.
+ If unsure, you shouldn't set "utf8" here.
+ See <file:Documentation/filesystems/vfat.txt> for more information.
+
+config NTFS_FS
+ tristate "NTFS file system support"
+ select NLS
+ help
+ NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
+
+ Saying Y or M here enables read support. There is partial, but
+ safe, write support available. For write support you must also
+ say Y to "NTFS write support" below.
+
+ There are also a number of user-space tools available, called
+ ntfsprogs. These include ntfsundelete and ntfsresize, that work
+ without NTFS support enabled in the kernel.
+
+ This is a rewrite from scratch of Linux NTFS support and replaced
+ the old NTFS code starting with Linux 2.5.11. A backport to
+ the Linux 2.4 kernel series is separately available as a patch
+ from the project web site.
+
+ For more information see <file:Documentation/filesystems/ntfs.txt>
+ and <http://linux-ntfs.sourceforge.net/>.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called ntfs.
+
+ If you are not using Windows NT, 2000, XP or 2003 in addition to
+ Linux on your computer it is safe to say N.
+
+config NTFS_DEBUG
+ bool "NTFS debugging support"
+ depends on NTFS_FS
+ help
+ If you are experiencing any problems with the NTFS file system, say
+ Y here. This will result in additional consistency checks to be
+ performed by the driver as well as additional debugging messages to
+ be written to the system log. Note that debugging messages are
+ disabled by default. To enable them, supply the option debug_msgs=1
+ at the kernel command line when booting the kernel or as an option
+ to insmod when loading the ntfs module. Once the driver is active,
+ you can enable debugging messages by doing (as root):
+ echo 1 > /proc/sys/fs/ntfs-debug
+ Replacing the "1" with "0" would disable debug messages.
+
+ If you leave debugging messages disabled, this results in little
+ overhead, but enabling debug messages results in very significant
+ slowdown of the system.
+
+ When reporting bugs, please try to have available a full dump of
+ debugging messages while the misbehaviour was occurring.
+
+config NTFS_RW
+ bool "NTFS write support"
+ depends on NTFS_FS
+ help
+ This enables the partial, but safe, write support in the NTFS driver.
+
+ The only supported operation is overwriting existing files, without
+ changing the file length. No file or directory creation, deletion or
+ renaming is possible. Note only non-resident files can be written to
+ so you may find that some very small files (<500 bytes or so) cannot
+ be written to.
+
+ While we cannot guarantee that it will not damage any data, we have
+ so far not received a single report where the driver would have
+ damaged someones data so we assume it is perfectly safe to use.
+
+ Note: While write support is safe in this version (a rewrite from
+ scratch of the NTFS support), it should be noted that the old NTFS
+ write support, included in Linux 2.5.10 and before (since 1997),
+ is not safe.
+
+ This is currently useful with TopologiLinux. TopologiLinux is run
+ on top of any DOS/Microsoft Windows system without partitioning your
+ hard disk. Unlike other Linux distributions TopologiLinux does not
+ need its own partition. For more information see
+ <http://topologi-linux.sourceforge.net/>
+
+ It is perfectly safe to say N here.
+
+endmenu
+
+menu "Pseudo filesystems"
+
+config PROC_FS
+ bool "/proc file system support"
+ help
+ This is a virtual file system providing information about the status
+ of the system. "Virtual" means that it doesn't take up any space on
+ your hard disk: the files are created on the fly by the kernel when
+ you try to access them. Also, you cannot read the files with older
+ version of the program less: you need to use more or cat.
+
+ It's totally cool; for example, "cat /proc/interrupts" gives
+ information about what the different IRQs are used for at the moment
+ (there is a small number of Interrupt ReQuest lines in your computer
+ that are used by the attached devices to gain the CPU's attention --
+ often a source of trouble if two devices are mistakenly configured
+ to use the same IRQ). The program procinfo to display some
+ information about your system gathered from the /proc file system.
+
+ Before you can use the /proc file system, it has to be mounted,
+ meaning it has to be given a location in the directory hierarchy.
+ That location should be /proc. A command such as "mount -t proc proc
+ /proc" or the equivalent line in /etc/fstab does the job.
+
+ The /proc file system is explained in the file
+ <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
+ ("man 5 proc").
+
+ This option will enlarge your kernel by about 67 KB. Several
+ programs depend on this, so everyone should say Y here.
+
+config PROC_KCORE
+ bool "/proc/kcore support" if !ARM
+ depends on PROC_FS && MMU
+
+config SYSFS
+ bool "sysfs file system support" if EMBEDDED
+ default y
+ help
+ The sysfs filesystem is a virtual filesystem that the kernel uses to
+ export internal kernel objects, their attributes, and their
+ relationships to one another.
+
+ Users can use sysfs to ascertain useful information about the running
+ kernel, such as the devices the kernel has discovered on each bus and
+ which driver each is bound to. sysfs can also be used to tune devices
+ and other kernel subsystems.
+
+ Some system agents rely on the information in sysfs to operate.
+ /sbin/hotplug uses device and object attributes in sysfs to assist in
+ delegating policy decisions, like persistantly naming devices.
+
+ sysfs is currently used by the block subsystem to mount the root
+ partition. If sysfs is disabled you must specify the boot device on
+ the kernel boot command line via its major and minor numbers. For
+ example, "root=03:01" for /dev/hda1.
+
+ Designers of embedded systems may wish to say N here to conserve space.
+
+config DEVFS_FS
+ bool "/dev file system support (OBSOLETE)"
+ depends on EXPERIMENTAL
+ help
+ This is support for devfs, a virtual file system (like /proc) which
+ provides the file system interface to device drivers, normally found
+ in /dev. Devfs does not depend on major and minor number
+ allocations. Device drivers register entries in /dev which then
+ appear automatically, which means that the system administrator does
+ not have to create character and block special device files in the
+ /dev directory using the mknod command (or MAKEDEV script) anymore.
+
+ This is work in progress. If you want to use this, you *must* read
+ the material in <file:Documentation/filesystems/devfs/>, especially
+ the file README there.
+
+ Note that devfs no longer manages /dev/pts! If you are using UNIX98
+ ptys, you will also need to mount the /dev/pts filesystem (devpts).
+
+ Note that devfs has been obsoleted by udev,
+ <http://www.kernel.org/pub/linux/utils/kernel/hotplug/>.
+ It has been stripped down to a bare minimum and is only provided for
+ legacy installations that use its naming scheme which is
+ unfortunately different from the names normal Linux installations
+ use.
+
+ If unsure, say N.
+
+config DEVFS_MOUNT
+ bool "Automatically mount at boot"
+ depends on DEVFS_FS
+ help
+ This option appears if you have CONFIG_DEVFS_FS enabled. Setting
+ this to 'Y' will make the kernel automatically mount devfs onto /dev
+ when the system is booted, before the init thread is started.
+ You can override this with the "devfs=nomount" boot option.
+
+ If unsure, say N.
+
+config DEVFS_DEBUG
+ bool "Debug devfs"
+ depends on DEVFS_FS
+ help
+ If you say Y here, then the /dev file system code will generate
+ debugging messages. See the file
+ <file:Documentation/filesystems/devfs/boot-options> for more
+ details.
+
+ If unsure, say N.
+
+config DEVPTS_FS_XATTR
+ bool "/dev/pts Extended Attributes"
+ depends on UNIX98_PTYS
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+config DEVPTS_FS_SECURITY
+ bool "/dev/pts Security Labels"
+ depends on DEVPTS_FS_XATTR
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the /dev/pts filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
+
+config TMPFS
+ bool "Virtual memory file system support (former shm fs)"
+ help
+ Tmpfs is a file system which keeps all files in virtual memory.
+
+ Everything in tmpfs is temporary in the sense that no files will be
+ created on your hard drive. The files live in memory and swap
+ space. If you unmount a tmpfs instance, everything stored therein is
+ lost.
+
+ See <file:Documentation/filesystems/tmpfs.txt> for details.
+
+config TMPFS_XATTR
+ bool "tmpfs Extended Attributes"
+ depends on TMPFS
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+config TMPFS_SECURITY
+ bool "tmpfs Security Labels"
+ depends on TMPFS_XATTR
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the tmpfs filesystem.
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
+
+config HUGETLBFS
+ bool "HugeTLB file system support"
+ depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || X86_64 || BROKEN
+
+config HUGETLB_PAGE
+ def_bool HUGETLBFS
+
+config RAMFS
+ bool
+ default y
+ ---help---
+ Ramfs is a file system which keeps all files in RAM. It allows
+ read and write access.
+
+ It is more of an programming example than a useable file system. If
+ you need a file system which lives in RAM with limit checking use
+ tmpfs.
+
+ To compile this as a module, choose M here: the module will be called
+ ramfs.
+
+endmenu
+
+menu "Miscellaneous filesystems"
+
+config ADFS_FS
+ tristate "ADFS file system support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ The Acorn Disc Filing System is the standard file system of the
+ RiscOS operating system which runs on Acorn's ARM-based Risc PC
+ systems and the Acorn Archimedes range of machines. If you say Y
+ here, Linux will be able to read from ADFS partitions on hard drives
+ and from ADFS-formatted floppy discs. If you also want to be able to
+ write to those devices, say Y to "ADFS write support" below.
+
+ The ADFS partition should be the first partition (i.e.,
+ /dev/[hs]d?1) on each of your drives. Please read the file
+ <file:Documentation/filesystems/adfs.txt> for further details.
+
+ To compile this code as a module, choose M here: the module will be
+ called adfs.
+
+ If unsure, say N.
+
+config ADFS_FS_RW
+ bool "ADFS write support (DANGEROUS)"
+ depends on ADFS_FS
+ help
+ If you say Y here, you will be able to write to ADFS partitions on
+ hard drives and ADFS-formatted floppy disks. This is experimental
+ codes, so if you're unsure, say N.
+
+config AFFS_FS
+ tristate "Amiga FFS file system support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ The Fast File System (FFS) is the common file system used on hard
+ disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y
+ if you want to be able to read and write files from and to an Amiga
+ FFS partition on your hard drive. Amiga floppies however cannot be
+ read with this driver due to an incompatibility of the floppy
+ controller used in an Amiga and the standard floppy controller in
+ PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
+ and <file:fs/affs/Changes>.
+
+ With this driver you can also mount disk files used by Bernd
+ Schmidt's Un*X Amiga Emulator
+ (<http://www.freiburg.linux.de/~uae/>).
+ If you want to do this, you will also need to say Y or M to "Loop
+ device support", above.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called affs. If unsure, say N.
+
+config HFS_FS
+ tristate "Apple Macintosh file system support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ If you say Y here, you will be able to mount Macintosh-formatted
+ floppy disks and hard drive partitions with full read-write access.
+ Please read <file:fs/hfs/HFS.txt> to learn about the available mount
+ options.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called hfs.
+
+config HFSPLUS_FS
+ tristate "Apple Extended HFS file system support"
+ select NLS
+ select NLS_UTF8
+ help
+ If you say Y here, you will be able to mount extended format
+ Macintosh-formatted hard drive partitions with full read-write access.
+
+ This file system is often called HFS+ and was introduced with
+ MacOS 8. It includes all Mac specific filesystem data such as
+ data forks and creator codes, but it also has several UNIX
+ style features such as file ownership and permissions.
+
+config BEFS_FS
+ tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select NLS
+ help
+ The BeOS File System (BeFS) is the native file system of Be, Inc's
+ BeOS. Notable features include support for arbitrary attributes
+ on files and directories, and database-like indeces on selected
+ attributes. (Also note that this driver doesn't make those features
+ available at this time). It is a 64 bit filesystem, so it supports
+ extremly large volumes and files.
+
+ If you use this filesystem, you should also say Y to at least one
+ of the NLS (native language support) options below.
+
+ If you don't know what this is about, say N.
+
+ To compile this as a module, choose M here: the module will be
+ called befs.
+
+config BEFS_DEBUG
+ bool "Debug BeFS"
+ depends on BEFS_FS
+ help
+ If you say Y here, you can use the 'debug' mount option to enable
+ debugging output from the driver.
+
+config BFS_FS
+ tristate "BFS file system support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ Boot File System (BFS) is a file system used under SCO UnixWare to
+ allow the bootloader access to the kernel image and other important
+ files during the boot process. It is usually mounted under /stand
+ and corresponds to the slice marked as "STAND" in the UnixWare
+ partition. You should say Y if you want to read or write the files
+ on your /stand slice from within Linux. You then also need to say Y
+ to "UnixWare slices support", below. More information about the BFS
+ file system is contained in the file
+ <file:Documentation/filesystems/bfs.txt>.
+
+ If you don't know what this is about, say N.
+
+ To compile this as a module, choose M here: the module will be called
+ bfs. Note that the file system of your root partition (the one
+ containing the directory /) cannot be compiled as a module.
+
+
+
+config EFS_FS
+ tristate "EFS file system support (read only) (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ EFS is an older file system used for non-ISO9660 CD-ROMs and hard
+ disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
+ uses the XFS file system for hard disk partitions however).
+
+ This implementation only offers read-only access. If you don't know
+ what all this is about, it's safe to say N. For more information
+ about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
+
+ To compile the EFS file system support as a module, choose M here: the
+ module will be called efs.
+
+config JFFS_FS
+ tristate "Journalling Flash File System (JFFS) support"
+ depends on MTD
+ help
+ JFFS is the Journaling Flash File System developed by Axis
+ Communications in Sweden, aimed at providing a crash/powerdown-safe
+ file system for disk-less embedded devices. Further information is
+ available at (<http://developer.axis.com/software/jffs/>).
+
+config JFFS_FS_VERBOSE
+ int "JFFS debugging verbosity (0 = quiet, 3 = noisy)"
+ depends on JFFS_FS
+ default "0"
+ help
+ Determines the verbosity level of the JFFS debugging messages.
+
+config JFFS_PROC_FS
+ bool "JFFS stats available in /proc filesystem"
+ depends on JFFS_FS && PROC_FS
+ help
+ Enabling this option will cause statistics from mounted JFFS file systems
+ to be made available to the user in the /proc/fs/jffs/ directory.
+
+config JFFS2_FS
+ tristate "Journalling Flash File System v2 (JFFS2) support"
+ select CRC32
+ depends on MTD
+ help
+ JFFS2 is the second generation of the Journalling Flash File System
+ for use on diskless embedded devices. It provides improved wear
+ levelling, compression and support for hard links. You cannot use
+ this on normal block devices, only on 'MTD' devices.
+
+ Further information on the design and implementation of JFFS2 is
+ available at <http://sources.redhat.com/jffs2/>.
+
+config JFFS2_FS_DEBUG
+ int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
+ depends on JFFS2_FS
+ default "0"
+ help
+ This controls the amount of debugging messages produced by the JFFS2
+ code. Set it to zero for use in production systems. For evaluation,
+ testing and debugging, it's advisable to set it to one. This will
+ enable a few assertions and will print debugging messages at the
+ KERN_DEBUG loglevel, where they won't normally be visible. Level 2
+ is unlikely to be useful - it enables extra debugging in certain
+ areas which at one point needed debugging, but when the bugs were
+ located and fixed, the detailed messages were relegated to level 2.
+
+ If reporting bugs, please try to have available a full dump of the
+ messages at debug level 1 while the misbehaviour was occurring.
+
+config JFFS2_FS_NAND
+ bool "JFFS2 support for NAND flash"
+ depends on JFFS2_FS
+ default n
+ help
+ This enables the support for NAND flash in JFFS2. NAND is a newer
+ type of flash chip design than the traditional NOR flash, with
+ higher density but a handful of characteristics which make it more
+ interesting for the file system to use.
+
+ Say 'N' unless you have NAND flash.
+
+config JFFS2_FS_NOR_ECC
+ bool "JFFS2 support for ECC'd NOR flash (EXPERIMENTAL)"
+ depends on JFFS2_FS && EXPERIMENTAL
+ default n
+ help
+ This enables the experimental support for NOR flash with transparent
+ ECC for JFFS2. This type of flash chip is not common, however it is
+ available from ST Microelectronics.
+
+config JFFS2_COMPRESSION_OPTIONS
+ bool "Advanced compression options for JFFS2"
+ depends on JFFS2_FS
+ default n
+ help
+ Enabling this option allows you to explicitly choose which
+ compression modules, if any, are enabled in JFFS2. Removing
+ compressors and mean you cannot read existing file systems,
+ and enabling experimental compressors can mean that you
+ write a file system which cannot be read by a standard kernel.
+
+ If unsure, you should _definitely_ say 'N'.
+
+config JFFS2_ZLIB
+ bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
+ select ZLIB_INFLATE
+ select ZLIB_DEFLATE
+ depends on JFFS2_FS
+ default y
+ help
+ Zlib is designed to be a free, general-purpose, legally unencumbered,
+ lossless data-compression library for use on virtually any computer
+ hardware and operating system. See <http://www.gzip.org/zlib/> for
+ further information.
+
+ Say 'Y' if unsure.
+
+config JFFS2_RTIME
+ bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+ depends on JFFS2_FS
+ default y
+ help
+ Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
+
+config JFFS2_RUBIN
+ bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
+ depends on JFFS2_FS
+ default n
+ help
+ RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
+
+choice
+ prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
+ default JFFS2_CMODE_PRIORITY
+ depends on JFFS2_FS
+ help
+ You can set here the default compression mode of JFFS2 from
+ the available compression modes. Don't touch if unsure.
+
+config JFFS2_CMODE_NONE
+ bool "no compression"
+ help
+ Uses no compression.
+
+config JFFS2_CMODE_PRIORITY
+ bool "priority"
+ help
+ Tries the compressors in a predefinied order and chooses the first
+ successful one.
+
+config JFFS2_CMODE_SIZE
+ bool "size (EXPERIMENTAL)"
+ help
+ Tries all compressors and chooses the one which has the smallest
+ result.
+
+endchoice
+
+config CRAMFS
+ tristate "Compressed ROM file system support (cramfs)"
+ select ZLIB_INFLATE
+ help
+ Saying Y here includes support for CramFs (Compressed ROM File
+ System). CramFs is designed to be a simple, small, and compressed
+ file system for ROM based embedded systems. CramFs is read-only,
+ limited to 256MB file systems (with 16MB files), and doesn't support
+ 16/32 bits uid/gid, hard links and timestamps.
+
+ See <file:Documentation/filesystems/cramfs.txt> and
+ <file:fs/cramfs/README> for further information.
+
+ To compile this as a module, choose M here: the module will be called
+ cramfs. Note that the root file system (the one containing the
+ directory /) cannot be compiled as a module.
+
+ If unsure, say N.
+
+config VXFS_FS
+ tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
+ help
+ FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
+ file system format. VERITAS VxFS(TM) is the standard file system
+ of SCO UnixWare (and possibly others) and optionally available
+ for Sunsoft Solaris, HP-UX and many other operating systems.
+ Currently only readonly access is supported.
+
+ NOTE: the file system type as used by mount(1), mount(2) and
+ fstab(5) is 'vxfs' as it describes the file system format, not
+ the actual driver.
+
+ To compile this as a module, choose M here: the module will be
+ called freevxfs. If unsure, say N.
+
+
+config HPFS_FS
+ tristate "OS/2 HPFS file system support"
+ help
+ OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
+ is the file system used for organizing files on OS/2 hard disk
+ partitions. Say Y if you want to be able to read files from and
+ write files to an OS/2 HPFS partition on your hard drive. OS/2
+ floppies however are in regular MSDOS format, so you don't need this
+ option in order to be able to read them. Read
+ <file:Documentation/filesystems/hpfs.txt>.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called hpfs. If unsure, say N.
+
+
+
+config QNX4FS_FS
+ tristate "QNX4 file system support (read only)"
+ help
+ This is the file system used by the real-time operating systems
+ QNX 4 and QNX 6 (the latter is also called QNX RTP).
+ Further information is available at <http://www.qnx.com/>.
+ Say Y if you intend to mount QNX hard disks or floppies.
+ Unless you say Y to "QNX4FS read-write support" below, you will
+ only be able to read these file systems.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called qnx4.
+
+ If you don't know whether you need it, then you don't need it:
+ answer N.
+
+config QNX4FS_RW
+ bool "QNX4FS write support (DANGEROUS)"
+ depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
+ help
+ Say Y if you want to test write support for QNX4 file systems.
+
+ It's currently broken, so for now:
+ answer N.
+
+
+
+config SYSV_FS
+ tristate "System V/Xenix/V7/Coherent file system support"
+ help
+ SCO, Xenix and Coherent are commercial Unix systems for Intel
+ machines, and Version 7 was used on the DEC PDP-11. Saying Y
+ here would allow you to read from their floppies and hard disk
+ partitions.
+
+ If you have floppies or hard disk partitions like that, it is likely
+ that they contain binaries from those other Unix systems; in order
+ to run these binaries, you will want to install linux-abi which is a
+ a set of kernel modules that lets you run SCO, Xenix, Wyse,
+ UnixWare, Dell Unix and System V programs under Linux. It is
+ available via FTP (user: ftp) from
+ <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
+ NOTE: that will work only for binaries from Intel-based systems;
+ PDP ones will have to wait until somebody ports Linux to -11 ;-)
+
+ If you only intend to mount files from some other Unix over the
+ network using NFS, you don't need the System V file system support
+ (but you need NFS file system support obviously).
+
+ Note that this option is generally not needed for floppies, since a
+ good portable way to transport files and directories between unixes
+ (and even other operating systems) is given by the tar program ("man
+ tar" or preferably "info tar"). Note also that this option has
+ nothing whatsoever to do with the option "System V IPC". Read about
+ the System V file system in
+ <file:Documentation/filesystems/sysv-fs.txt>.
+ Saying Y here will enlarge your kernel by about 27 KB.
+
+ To compile this as a module, choose M here: the module will be called
+ sysv.
+
+ If you haven't heard about all of this before, it's safe to say N.
+
+
+
+config UFS_FS
+ tristate "UFS file system support (read only)"
+ help
+ BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
+ OpenBSD and NeXTstep) use a file system called UFS. Some System V
+ Unixes can create and mount hard disk partitions and diskettes using
+ this file system as well. Saying Y here will allow you to read from
+ these partitions; if you also want to write to them, say Y to the
+ experimental "UFS file system write support", below. Please read the
+ file <file:Documentation/filesystems/ufs.txt> for more information.
+
+ The recently released UFS2 variant (used in FreeBSD 5.x) is
+ READ-ONLY supported.
+
+ If you only intend to mount files from some other Unix over the
+ network using NFS, you don't need the UFS file system support (but
+ you need NFS file system support obviously).
+
+ Note that this option is generally not needed for floppies, since a
+ good portable way to transport files and directories between unixes
+ (and even other operating systems) is given by the tar program ("man
+ tar" or preferably "info tar").
+
+ When accessing NeXTstep files, you may need to convert them from the
+ NeXT character set to the Latin1 character set; use the program
+ recode ("info recode") for this purpose.
+
+ To compile the UFS file system support as a module, choose M here: the
+ module will be called ufs.
+
+ If you haven't heard about all of this before, it's safe to say N.
+
+config UFS_FS_WRITE
+ bool "UFS file system write support (DANGEROUS)"
+ depends on UFS_FS && EXPERIMENTAL
+ help
+ Say Y here if you want to try writing to UFS partitions. This is
+ experimental, so you should back up your UFS partitions beforehand.
+
+endmenu
+
+menu "Network File Systems"
+ depends on NET
+
+config NFS_FS
+ tristate "NFS file system support"
+ depends on INET
+ select LOCKD
+ select SUNRPC
+ help
+ If you are connected to some other (usually local) Unix computer
+ (using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
+ on that computer (the NFS server) using the Network File Sharing
+ protocol, say Y. "Mounting files" means that the client can access
+ the files with usual UNIX commands as if they were sitting on the
+ client's hard disk. For this to work, the server must run the
+ programs nfsd and mountd (but does not need to have NFS file system
+ support enabled in its kernel). NFS is explained in the Network
+ Administrator's Guide, available from
+ <http://www.tldp.org/docs.html#guide>, on its man page: "man
+ nfs", and in the NFS-HOWTO.
+
+ A superior but less widely used alternative to NFS is provided by
+ the Coda file system; see "Coda file system support" below.
+
+ If you say Y here, you should have said Y to TCP/IP networking also.
+ This option would enlarge your kernel by about 27 KB.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called nfs.
+
+ If you are configuring a diskless machine which will mount its root
+ file system over NFS at boot time, say Y here and to "Kernel
+ level IP autoconfiguration" above and to "Root file system on NFS"
+ below. You cannot compile this driver as a module in this case.
+ There are two packages designed for booting diskless machines over
+ the net: netboot, available from
+ <http://ftp1.sourceforge.net/netboot/>, and Etherboot,
+ available from <http://ftp1.sourceforge.net/etherboot/>.
+
+ If you don't know what all this is about, say N.
+
+config NFS_V3
+ bool "Provide NFSv3 client support"
+ depends on NFS_FS
+ help
+ Say Y here if you want your NFS client to be able to speak version
+ 3 of the NFS protocol.
+
+ If unsure, say Y.
+
+config NFS_V4
+ bool "Provide NFSv4 client support (EXPERIMENTAL)"
+ depends on NFS_FS && EXPERIMENTAL
+ select RPCSEC_GSS_KRB5
+ help
+ Say Y here if you want your NFS client to be able to speak the newer
+ version 4 of the NFS protocol.
+
+ Note: Requires auxiliary userspace daemons which may be found on
+ http://www.citi.umich.edu/projects/nfsv4/
+
+ If unsure, say N.
+
+config NFS_DIRECTIO
+ bool "Allow direct I/O on NFS files (EXPERIMENTAL)"
+ depends on NFS_FS && EXPERIMENTAL
+ help
+ This option enables applications to perform uncached I/O on files
+ in NFS file systems using the O_DIRECT open() flag. When O_DIRECT
+ is set for a file, its data is not cached in the system's page
+ cache. Data is moved to and from user-level application buffers
+ directly. Unlike local disk-based file systems, NFS O_DIRECT has
+ no alignment restrictions.
+
+ Unless your program is designed to use O_DIRECT properly, you are
+ much better off allowing the NFS client to manage data caching for
+ you. Misusing O_DIRECT can cause poor server performance or network
+ storms. This kernel build option defaults OFF to avoid exposing
+ system administrators unwittingly to a potentially hazardous
+ feature.
+
+ For more details on NFS O_DIRECT, see fs/nfs/direct.c.
+
+ If unsure, say N. This reduces the size of the NFS client, and
+ causes open() to return EINVAL if a file residing in NFS is
+ opened with the O_DIRECT flag.
+
+config NFSD
+ tristate "NFS server support"
+ depends on INET
+ select LOCKD
+ select SUNRPC
+ select EXPORTFS
+ help
+ If you want your Linux box to act as an NFS *server*, so that other
+ computers on your local network which support NFS can access certain
+ directories on your box transparently, you have two options: you can
+ use the self-contained user space program nfsd, in which case you
+ should say N here, or you can say Y and use the kernel based NFS
+ server. The advantage of the kernel based solution is that it is
+ faster.
+
+ In either case, you will need support software; the respective
+ locations are given in the file <file:Documentation/Changes> in the
+ NFS section.
+
+ If you say Y here, you will get support for version 2 of the NFS
+ protocol (NFSv2). If you also want NFSv3, say Y to the next question
+ as well.
+
+ Please read the NFS-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile the NFS server support as a module, choose M here: the
+ module will be called nfsd. If unsure, say N.
+
+config NFSD_V3
+ bool "Provide NFSv3 server support"
+ depends on NFSD
+ help
+ If you would like to include the NFSv3 server as well as the NFSv2
+ server, say Y here. If unsure, say Y.
+
+config NFSD_V4
+ bool "Provide NFSv4 server support (EXPERIMENTAL)"
+ depends on NFSD_V3 && EXPERIMENTAL
+ select NFSD_TCP
+ help
+ If you would like to include the NFSv4 server as well as the NFSv2
+ and NFSv3 servers, say Y here. This feature is experimental, and
+ should only be used if you are interested in helping to test NFSv4.
+ If unsure, say N.
+
+config NFSD_TCP
+ bool "Provide NFS server over TCP support"
+ depends on NFSD
+ default y
+ help
+ If you want your NFS server to support TCP connections, say Y here.
+ TCP connections usually perform better than the default UDP when
+ the network is lossy or congested. If unsure, say Y.
+
+config ROOT_NFS
+ bool "Root file system on NFS"
+ depends on NFS_FS=y && IP_PNP
+ help
+ If you want your Linux box to mount its whole root file system (the
+ one containing the directory /) from some other computer over the
+ net via NFS (presumably because your box doesn't have a hard disk),
+ say Y. Read <file:Documentation/nfsroot.txt> for details. It is
+ likely that in this case, you also want to say Y to "Kernel level IP
+ autoconfiguration" so that your box can discover its network address
+ at boot time.
+
+ Most people say N here.
+
+config LOCKD
+ tristate
+
+config LOCKD_V4
+ bool
+ depends on NFSD_V3 || NFS_V3
+ default y
+
+config EXPORTFS
+ tristate
+
+config SUNRPC
+ tristate
+
+config SUNRPC_GSS
+ tristate
+
+config RPCSEC_GSS_KRB5
+ tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
+ depends on SUNRPC && EXPERIMENTAL
+ select SUNRPC_GSS
+ select CRYPTO
+ select CRYPTO_MD5
+ select CRYPTO_DES
+ help
+ Provides for secure RPC calls by means of a gss-api
+ mechanism based on Kerberos V5. This is required for
+ NFSv4.
+
+ Note: Requires an auxiliary userspace daemon which may be found on
+ http://www.citi.umich.edu/projects/nfsv4/
+
+ If unsure, say N.
+
+config RPCSEC_GSS_SPKM3
+ tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
+ depends on SUNRPC && EXPERIMENTAL
+ select SUNRPC_GSS
+ select CRYPTO
+ select CRYPTO_MD5
+ select CRYPTO_DES
+ help
+ Provides for secure RPC calls by means of a gss-api
+ mechanism based on the SPKM3 public-key mechanism.
+
+ Note: Requires an auxiliary userspace daemon which may be found on
+ http://www.citi.umich.edu/projects/nfsv4/
+
+ If unsure, say N.
+
+config SMB_FS
+ tristate "SMB file system support (to mount Windows shares etc.)"
+ depends on INET
+ select NLS
+ help
+ SMB (Server Message Block) is the protocol Windows for Workgroups
+ (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
+ files and printers over local networks. Saying Y here allows you to
+ mount their file systems (often called "shares" in this context) and
+ access them just like any other Unix directory. Currently, this
+ works only if the Windows machines use TCP/IP as the underlying
+ transport protocol, and not NetBEUI. For details, read
+ <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ Note: if you just want your box to act as an SMB *server* and make
+ files and printing services available to Windows clients (which need
+ to have a TCP/IP stack), you don't need to say Y here; you can use
+ the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
+ for that.
+
+ General information about how to connect Linux, Windows machines and
+ Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+ To compile the SMB support as a module, choose M here: the module will
+ be called smbfs. Most people say N, however.
+
+config SMB_NLS_DEFAULT
+ bool "Use a default NLS"
+ depends on SMB_FS
+ help
+ Enabling this will make smbfs use nls translations by default. You
+ need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
+ settings and you need to give the default nls for the SMB server as
+ CONFIG_SMB_NLS_REMOTE.
+
+ The nls settings can be changed at mount time, if your smbmount
+ supports that, using the codepage and iocharset parameters.
+
+ smbmount from samba 2.2.0 or later supports this.
+
+config SMB_NLS_REMOTE
+ string "Default Remote NLS Option"
+ depends on SMB_NLS_DEFAULT
+ default "cp437"
+ help
+ This setting allows you to specify a default value for which
+ codepage the server uses. If this field is left blank no
+ translations will be done by default. The local codepage/charset
+ default to CONFIG_NLS_DEFAULT.
+
+ The nls settings can be changed at mount time, if your smbmount
+ supports that, using the codepage and iocharset parameters.
+
+ smbmount from samba 2.2.0 or later supports this.
+
+config CIFS
+ tristate "CIFS support (advanced network filesystem for Samba, Window and other CIFS compliant servers)"
+ depends on INET
+ select NLS
+ help
+ This is the client VFS module for the Common Internet File System
+ (CIFS) protocol which is the successor to the Server Message Block
+ (SMB) protocol, the native file sharing mechanism for most early
+ PC operating systems. The CIFS protocol is fully supported by
+ file servers such as Windows 2000 (including Windows 2003, NT 4
+ and Windows XP) as well by Samba (which provides excellent CIFS
+ server support for Linux and many other operating systems). Currently
+ you must use the smbfs client filesystem to access older SMB servers
+ such as Windows 9x and OS/2.
+
+ The intent of the cifs module is to provide an advanced
+ network file system client for mounting to CIFS compliant servers,
+ including support for dfs (hierarchical name space), secure per-user
+ session establishment, safe distributed caching (oplock), optional
+ packet signing, Unicode and other internationalization improvements,
+ and optional Winbind (nsswitch) integration. You do not need to enable
+ cifs if running only a (Samba) server. It is possible to enable both
+ smbfs and cifs (e.g. if you are using CIFS for accessing Windows 2003
+ and Samba 3 servers, and smbfs for accessing old servers). If you need
+ to mount to Samba or Windows 2003 servers from this machine, say Y.
+
+config CIFS_STATS
+ bool "CIFS statistics"
+ depends on CIFS
+ help
+ Enabling this option will cause statistics for each server share
+ mounted by the cifs client to be displayed in /proc/fs/cifs/Stats
+
+config CIFS_XATTR
+ bool "CIFS extended attributes (EXPERIMENTAL)"
+ depends on CIFS
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details). CIFS maps the name of
+ extended attributes beginning with the user namespace prefix
+ to SMB/CIFS EAs. EAs are stored on Windows servers without the
+ user namespace prefix, but their names are seen by Linux cifs clients
+ prefaced by the user namespace prefix. The system namespace
+ (used by some filesystems to store ACLs) is not supported at
+ this time.
+
+ If unsure, say N.
+
+config CIFS_POSIX
+ bool "CIFS POSIX Extensions (EXPERIMENTAL)"
+ depends on CIFS_XATTR
+ help
+ Enabling this option will cause the cifs client to attempt to
+ negotiate a newer dialect with servers, such as Samba 3.0.5
+ or later, that optionally can handle more POSIX like (rather
+ than Windows like) file behavior. It also enables
+ support for POSIX ACLs (getfacl and setfacl) to servers
+ (such as Samba 3.10 and later) which can negotiate
+ CIFS POSIX ACL support. If unsure, say N.
+
+config CIFS_EXPERIMENTAL
+ bool "CIFS Experimental Features (EXPERIMENTAL)"
+ depends on CIFS
+ help
+ Enables cifs features under testing. These features
+ are highly experimental. If unsure, say N.
+
+config NCP_FS
+ tristate "NCP file system support (to mount NetWare volumes)"
+ depends on IPX!=n || INET
+ help
+ NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
+ used by Novell NetWare clients to talk to file servers. It is to
+ IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you
+ to mount NetWare file server volumes and to access them just like
+ any other Unix directory. For details, please read the file
+ <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
+ the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
+
+ You do not have to say Y here if you want your Linux box to act as a
+ file *server* for Novell NetWare clients.
+
+ General information about how to connect Linux, Windows machines and
+ Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+ To compile this as a module, choose M here: the module will be called
+ ncpfs. Say N unless you are connected to a Novell network.
+
+source "fs/ncpfs/Kconfig"
+
+config CODA_FS
+ tristate "Coda file system support (advanced network fs)"
+ depends on INET
+ help
+ Coda is an advanced network file system, similar to NFS in that it
+ enables you to mount file systems of a remote server and access them
+ with regular Unix commands as if they were sitting on your hard
+ disk. Coda has several advantages over NFS: support for
+ disconnected operation (e.g. for laptops), read/write server
+ replication, security model for authentication and encryption,
+ persistent client caches and write back caching.
+
+ If you say Y here, your Linux box will be able to act as a Coda
+ *client*. You will need user level code as well, both for the
+ client and server. Servers are currently user level, i.e. they need
+ no kernel support. Please read
+ <file:Documentation/filesystems/coda.txt> and check out the Coda
+ home page <http://www.coda.cs.cmu.edu/>.
+
+ To compile the coda client support as a module, choose M here: the
+ module will be called coda.
+
+config CODA_FS_OLD_API
+ bool "Use 96-bit Coda file identifiers"
+ depends on CODA_FS
+ help
+ A new kernel-userspace API had to be introduced for Coda v6.0
+ to support larger 128-bit file identifiers as needed by the
+ new realms implementation.
+
+ However this new API is not backward compatible with older
+ clients. If you really need to run the old Coda userspace
+ cache manager then say Y.
+
+ For most cases you probably want to say N.
+
+config AFS_FS
+# for fs/nls/Config.in
+ tristate "Andrew File System support (AFS) (Experimental)"
+ depends on INET && EXPERIMENTAL
+ select RXRPC
+ help
+ If you say Y here, you will get an experimental Andrew File System
+ driver. It currently only supports unsecured read-only AFS access.
+
+ See <file:Documentation/filesystems/afs.txt> for more intormation.
+
+ If unsure, say N.
+
+config RXRPC
+ tristate
+
+endmenu
+
+menu "Partition Types"
+
+source "fs/partitions/Kconfig"
+
+endmenu
+
+source "fs/nls/Kconfig"
+
+endmenu
+
OpenPOWER on IntegriCloud