summaryrefslogtreecommitdiffstats
path: root/firmware/Makefile
diff options
context:
space:
mode:
Diffstat (limited to 'firmware/Makefile')
-rw-r--r--firmware/Makefile175
1 files changed, 175 insertions, 0 deletions
diff --git a/firmware/Makefile b/firmware/Makefile
new file mode 100644
index 0000000..e4f2fb3
--- /dev/null
+++ b/firmware/Makefile
@@ -0,0 +1,175 @@
+#
+# kbuild file for firmware/
+#
+
+# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
+# leading /, it's relative to $(srctree).
+fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
+fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
+
+fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
+
+# There are three cases to care about:
+# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
+# include the firmware files to include, according to .config
+# 2. 'make modules_install', which will install firmware for modules, and
+# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
+# 3. 'make firmware_install', which installs all firmware, unconditionally.
+
+# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
+# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
+# But be aware that the config file might not be included at all.
+
+fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
+fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
+fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
+fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
+fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
+fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
+ ess/maestro3_assp_minisrc.fw
+fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
+ sb16/ima_adpcm_init.csp \
+ sb16/ima_adpcm_playback.csp \
+ sb16/ima_adpcm_capture.csp
+fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
+ yamaha/ds1e_ctrl.fw
+fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
+fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
+ emi26/bitstream.fw
+fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
+ emi62/spdif.fw emi62/midi.fw
+fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
+ kaweth/new_code_fix.bin \
+ kaweth/trigger_code_fix.bin
+ifdef CONFIG_FIRMWARE_IN_KERNEL
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
+else
+fw-shipped- := keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \
+ keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \
+ keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \
+ keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
+endif
+fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw
+fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
+ edgeport/down.fw edgeport/down2.fw
+fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
+fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
+ # whiteheat_loader_debug.fw
+fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
+fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
+fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
+fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
+
+fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
+
+# Directories which we _might_ need to create, so we have a rule for them.
+firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
+
+quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
+ cmd_mkdir = mkdir -p $@
+
+quiet_cmd_ihex = IHEX $@
+ cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
+
+quiet_cmd_ihex2fw = IHEX2FW $@
+ cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
+
+quiet_cmd_h16tofw = H16TOFW $@
+ cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
+
+quiet_cmd_fwbin = MK_FW $@
+ cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
+ FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
+ firmware/%.gen.S,%,$@))))"; \
+ ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \
+ ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \
+ PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \
+ echo "/* Generated by firmware/Makefile */" > $@;\
+ echo " .section .rodata" >>$@;\
+ echo " .p2align $${ASM_ALIGN}" >>$@;\
+ echo "_fw_$${FWSTR}_bin:" >>$@;\
+ echo " .incbin \"$(2)\"" >>$@;\
+ echo "_fw_end:" >>$@;\
+ echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
+ echo " .p2align $${ASM_ALIGN}" >>$@;\
+ echo "_fw_$${FWSTR}_name:" >>$@;\
+ echo " .string \"$$FWNAME\"" >>$@;\
+ echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\
+ echo " .p2align $${ASM_ALIGN}" >>$@;\
+ echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\
+ echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\
+ echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@;
+
+# One of these files will change, or come into existence, whenever
+# the configuration changes between 32-bit and 64-bit. The .S files
+# need to change when that happens.
+wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
+ include/config/ppc32.h include/config/ppc64.h \
+ include/config/superh32.h include/config/superh64.h \
+ include/config/x86_32.h include/config/x86_64.h)
+
+# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
+# It'll end up depending on these targets, so make them a PHONY rule which
+# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
+PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
+$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
+ @true
+
+# For the $$(dir %) trick, where we need % to be expanded first.
+.SECONDEXPANSION:
+
+$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
+ | $(objtree)/$$(dir %)
+ $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
+$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
+ include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
+ $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
+
+# The .o files depend on the binaries directly; the .S files don't.
+$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
+$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
+
+# .ihex is used just as a simple way to hold binary files in a source tree
+# where binaries are frowned upon. They are directly converted with objcopy.
+$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
+ $(call cmd,ihex)
+
+# .HEX is also Intel HEX, but where the offset and length in each record
+# is actually meaningful, because the firmware has to be loaded in a certain
+# order rather than as a single binary blob. Thus, we convert them into our
+# more compact binary representation of ihex records (<linux/ihex.h>)
+$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+ $(call cmd,ihex2fw)
+
+# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
+$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+ $(call cmd,h16tofw)
+
+$(firmware-dirs):
+ $(call cmd,mkdir)
+
+obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
+obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
+
+# Remove .S files and binaries created from ihex
+# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
+targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
+ $(shell find $(obj) -name \*.gen.S 2>/dev/null))
+
+# Without this, built-in.o won't be created when it's empty, and the
+# final vmlinux link will fail.
+obj-n := dummy
+
+hostprogs-y := ihex2fw
OpenPOWER on IntegriCloud