diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/amba/bus.c | 105 | ||||
-rw-r--r-- | drivers/gpio/gpio-mpc8xxx.c | 30 | ||||
-rw-r--r-- | drivers/gpio/gpio-tegra.c | 59 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-imx.c | 4 | ||||
-rw-r--r-- | drivers/mfd/Kconfig | 1 | ||||
-rw-r--r-- | drivers/mfd/twl-core.c | 21 | ||||
-rw-r--r-- | drivers/mmc/host/at91_mci.c | 1 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 6 | ||||
-rw-r--r-- | drivers/net/Space.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/cirrus/Kconfig | 19 | ||||
-rw-r--r-- | drivers/net/ethernet/cirrus/cs89x0.c | 148 | ||||
-rw-r--r-- | drivers/net/phy/mdio-gpio.c | 4 | ||||
-rw-r--r-- | drivers/of/platform.c | 10 | ||||
-rw-r--r-- | drivers/rtc/Kconfig | 4 | ||||
-rw-r--r-- | drivers/rtc/rtc-s3c.c | 71 | ||||
-rw-r--r-- | drivers/rtc/rtc-sa1100.c | 198 | ||||
-rw-r--r-- | drivers/tty/serial/imx.c | 7 | ||||
-rw-r--r-- | drivers/usb/gadget/Kconfig | 4 |
19 files changed, 446 insertions, 250 deletions
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 54eaf96..01c2cf4 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -497,37 +497,22 @@ static void amba_device_release(struct device *dev) } /** - * amba_device_register - register an AMBA device - * @dev: AMBA device to register - * @parent: parent memory resource + * amba_device_add - add a previously allocated AMBA device structure + * @dev: AMBA device allocated by amba_device_alloc + * @parent: resource parent for this devices resources * - * Setup the AMBA device, reading the cell ID if present. - * Claim the resource, and register the AMBA device with - * the Linux device manager. + * Claim the resource, and read the device cell ID if not already + * initialized. Register the AMBA device with the Linux device + * manager. */ -int amba_device_register(struct amba_device *dev, struct resource *parent) +int amba_device_add(struct amba_device *dev, struct resource *parent) { u32 size; void __iomem *tmp; int i, ret; - device_initialize(&dev->dev); - - /* - * Copy from device_add - */ - if (dev->dev.init_name) { - dev_set_name(&dev->dev, "%s", dev->dev.init_name); - dev->dev.init_name = NULL; - } - - dev->dev.release = amba_device_release; - dev->dev.bus = &amba_bustype; - dev->dev.dma_mask = &dev->dma_mask; - dev->res.name = dev_name(&dev->dev); - - if (!dev->dev.coherent_dma_mask && dev->dma_mask) - dev_warn(&dev->dev, "coherent dma mask is unset\n"); + WARN_ON(dev->irq[0] == (unsigned int)-1); + WARN_ON(dev->irq[1] == (unsigned int)-1); ret = request_resource(parent, &dev->res); if (ret) @@ -582,9 +567,9 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) if (ret) goto err_release; - if (dev->irq[0] != NO_IRQ) + if (dev->irq[0] && dev->irq[0] != NO_IRQ) ret = device_create_file(&dev->dev, &dev_attr_irq0); - if (ret == 0 && dev->irq[1] != NO_IRQ) + if (ret == 0 && dev->irq[1] && dev->irq[1] != NO_IRQ) ret = device_create_file(&dev->dev, &dev_attr_irq1); if (ret == 0) return ret; @@ -596,6 +581,74 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) err_out: return ret; } +EXPORT_SYMBOL_GPL(amba_device_add); + +static void amba_device_initialize(struct amba_device *dev, const char *name) +{ + device_initialize(&dev->dev); + if (name) + dev_set_name(&dev->dev, "%s", name); + dev->dev.release = amba_device_release; + dev->dev.bus = &amba_bustype; + dev->dev.dma_mask = &dev->dma_mask; + dev->res.name = dev_name(&dev->dev); +} + +/** + * amba_device_alloc - allocate an AMBA device + * @name: sysfs name of the AMBA device + * @base: base of AMBA device + * @size: size of AMBA device + * + * Allocate and initialize an AMBA device structure. Returns %NULL + * on failure. + */ +struct amba_device *amba_device_alloc(const char *name, resource_size_t base, + size_t size) +{ + struct amba_device *dev; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev) { + amba_device_initialize(dev, name); + dev->res.start = base; + dev->res.end = base + size - 1; + dev->res.flags = IORESOURCE_MEM; + } + + return dev; +} +EXPORT_SYMBOL_GPL(amba_device_alloc); + +/** + * amba_device_register - register an AMBA device + * @dev: AMBA device to register + * @parent: parent memory resource + * + * Setup the AMBA device, reading the cell ID if present. + * Claim the resource, and register the AMBA device with + * the Linux device manager. + */ +int amba_device_register(struct amba_device *dev, struct resource *parent) +{ + amba_device_initialize(dev, dev->dev.init_name); + dev->dev.init_name = NULL; + + if (!dev->dev.coherent_dma_mask && dev->dma_mask) + dev_warn(&dev->dev, "coherent dma mask is unset\n"); + + return amba_device_add(dev, parent); +} + +/** + * amba_device_put - put an AMBA device + * @dev: AMBA device to put + */ +void amba_device_put(struct amba_device *dev) +{ + put_device(&dev->dev); +} +EXPORT_SYMBOL_GPL(amba_device_put); /** * amba_device_unregister - unregister an AMBA device diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index 5cd04b6..e6568c1 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -37,7 +37,7 @@ struct mpc8xxx_gpio_chip { * open drain mode safely */ u32 data; - struct irq_host *irq; + struct irq_domain *irq; void *of_dev_id_data; }; @@ -281,7 +281,7 @@ static struct irq_chip mpc8xxx_irq_chip = { .irq_set_type = mpc8xxx_irq_set_type, }; -static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq, +static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { struct mpc8xxx_gpio_chip *mpc8xxx_gc = h->host_data; @@ -296,24 +296,9 @@ static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq, return 0; } -static int mpc8xxx_gpio_irq_xlate(struct irq_host *h, struct device_node *ct, - const u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, - unsigned int *out_flags) - -{ - /* interrupt sense values coming from the device tree equal either - * EDGE_FALLING or EDGE_BOTH - */ - *out_hwirq = intspec[0]; - *out_flags = intspec[1]; - - return 0; -} - -static struct irq_host_ops mpc8xxx_gpio_irq_ops = { +static struct irq_domain_ops mpc8xxx_gpio_irq_ops = { .map = mpc8xxx_gpio_irq_map, - .xlate = mpc8xxx_gpio_irq_xlate, + .xlate = irq_domain_xlate_twocell, }; static struct of_device_id mpc8xxx_gpio_ids[] __initdata = { @@ -364,9 +349,8 @@ static void __init mpc8xxx_add_controller(struct device_node *np) if (hwirq == NO_IRQ) goto skip_irq; - mpc8xxx_gc->irq = - irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, MPC8XXX_GPIO_PINS, - &mpc8xxx_gpio_irq_ops, MPC8XXX_GPIO_PINS); + mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS, + &mpc8xxx_gpio_irq_ops, mpc8xxx_gc); if (!mpc8xxx_gc->irq) goto skip_irq; @@ -374,8 +358,6 @@ static void __init mpc8xxx_add_controller(struct device_node *np) if (id) mpc8xxx_gc->of_dev_id_data = id->data; - mpc8xxx_gc->irq->host_data = mpc8xxx_gc; - /* ack and mask all irqs */ out_be32(mm_gc->regs + GPIO_IER, 0xffffffff); out_be32(mm_gc->regs + GPIO_IMR, 0); diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index bdc2937..6f17671 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -25,6 +25,7 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/irqdomain.h> #include <asm/mach/irq.h> @@ -74,9 +75,10 @@ struct tegra_gpio_bank { #endif }; - +static struct irq_domain *irq_domain; static void __iomem *regs; -static struct tegra_gpio_bank tegra_gpio_banks[7]; +static u32 tegra_gpio_bank_count; +static struct tegra_gpio_bank *tegra_gpio_banks; static inline void tegra_gpio_writel(u32 val, u32 reg) { @@ -139,7 +141,7 @@ static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset, static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { - return TEGRA_GPIO_TO_IRQ(offset); + return irq_find_mapping(irq_domain, offset); } static struct gpio_chip tegra_gpio_chip = { @@ -155,28 +157,28 @@ static struct gpio_chip tegra_gpio_chip = { static void tegra_gpio_irq_ack(struct irq_data *d) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio)); } static void tegra_gpio_irq_mask(struct irq_data *d) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0); } static void tegra_gpio_irq_unmask(struct irq_data *d) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1); } static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); int port = GPIO_PORT(gpio); int lvl_type; @@ -273,7 +275,7 @@ void tegra_gpio_resume(void) local_irq_save(flags); - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { + for (b = 0; b < tegra_gpio_bank_count; b++) { struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { @@ -296,7 +298,7 @@ void tegra_gpio_suspend(void) int p; local_irq_save(flags); - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { + for (b = 0; b < tegra_gpio_bank_count; b++) { struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { @@ -337,13 +339,44 @@ static struct lock_class_key gpio_lock_class; static int __devinit tegra_gpio_probe(struct platform_device *pdev) { + int irq_base; struct resource *res; struct tegra_gpio_bank *bank; int gpio; int i; int j; - for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { + for (;;) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, tegra_gpio_bank_count); + if (!res) + break; + tegra_gpio_bank_count++; + } + if (!tegra_gpio_bank_count) { + dev_err(&pdev->dev, "Missing IRQ resource\n"); + return -ENODEV; + } + + tegra_gpio_chip.ngpio = tegra_gpio_bank_count * 32; + + tegra_gpio_banks = devm_kzalloc(&pdev->dev, + tegra_gpio_bank_count * sizeof(*tegra_gpio_banks), + GFP_KERNEL); + if (!tegra_gpio_banks) { + dev_err(&pdev->dev, "Couldn't allocate bank structure\n"); + return -ENODEV; + } + + irq_base = irq_alloc_descs(-1, 0, tegra_gpio_chip.ngpio, 0); + if (irq_base < 0) { + dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n"); + return -ENODEV; + } + irq_domain = irq_domain_add_legacy(pdev->dev.of_node, + tegra_gpio_chip.ngpio, irq_base, 0, + &irq_domain_simple_ops, NULL); + + for (i = 0; i < tegra_gpio_bank_count; i++) { res = platform_get_resource(pdev, IORESOURCE_IRQ, i); if (!res) { dev_err(&pdev->dev, "Missing IRQ resource\n"); @@ -380,8 +413,8 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) gpiochip_add(&tegra_gpio_chip); - for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) { - int irq = TEGRA_GPIO_TO_IRQ(gpio); + for (gpio = 0; gpio < tegra_gpio_chip.ngpio; gpio++) { + int irq = irq_find_mapping(irq_domain, gpio); /* No validity check; all Tegra GPIOs are valid IRQs */ bank = &tegra_gpio_banks[GPIO_BANK(gpio)]; @@ -393,7 +426,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) set_irq_flags(irq, IRQF_VALID); } - for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { + for (i = 0; i < tegra_gpio_bank_count; i++) { bank = &tegra_gpio_banks[i]; irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler); diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 58832e5..8d1ab6f 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -196,7 +196,7 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - clk_enable(i2c_imx->clk); + clk_prepare_enable(i2c_imx->clk); writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR); /* Enable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2SR); @@ -245,7 +245,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) /* Disable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2CR); - clk_disable(i2c_imx->clk); + clk_disable_unprepare(i2c_imx->clk); } static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index f147395..1489c35 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -201,6 +201,7 @@ config MENELAUS config TWL4030_CORE bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" depends on I2C=y && GENERIC_HARDIRQS + select IRQ_DOMAIN help Say yes here if you have TWL4030 / TWL6030 family chip on your board. This core driver provides register access and IRQ handling diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 8ce3959..4970d43 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -149,7 +149,7 @@ #define TWL_MODULE_LAST TWL4030_MODULE_LAST -#define TWL4030_NR_IRQS 8 +#define TWL4030_NR_IRQS 34 /* core:8, power:8, gpio: 18 */ #define TWL6030_NR_IRQS 20 /* Base Address defns for twl4030_map[] */ @@ -263,10 +263,6 @@ struct twl_client { static struct twl_client twl_modules[TWL_NUM_SLAVES]; -#ifdef CONFIG_IRQ_DOMAIN -static struct irq_domain domain; -#endif - /* mapping the module id to slave id and base address */ struct twl_mapping { unsigned char sid; /* Slave ID */ @@ -1227,14 +1223,8 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) pdata->irq_base = status; pdata->irq_end = pdata->irq_base + nr_irqs; - -#ifdef CONFIG_IRQ_DOMAIN - domain.irq_base = pdata->irq_base; - domain.nr_irq = nr_irqs; - domain.of_node = of_node_get(node); - domain.ops = &irq_domain_simple_ops; - irq_domain_add(&domain); -#endif + irq_domain_add_legacy(node, nr_irqs, pdata->irq_base, 0, + &irq_domain_simple_ops, NULL); if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { dev_dbg(&client->dev, "can't talk I2C?\n"); @@ -1315,11 +1305,10 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1); } -#ifdef CONFIG_OF_DEVICE + status = -ENODEV; if (node) status = of_platform_populate(node, NULL, NULL, &client->dev); - else -#endif + if (status) status = add_children(pdata, id->driver_data); fail: diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 947faa5..efdb81d 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -86,7 +86,6 @@ static inline int at91mci_is_mci1rev2xx(void) { return ( cpu_is_at91sam9260() || cpu_is_at91sam9263() - || cpu_is_at91cap9() || cpu_is_at91sam9rl() || cpu_is_at91sam9g10() || cpu_is_at91sam9g20() diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 0d955ff..304f2f9 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1325,7 +1325,7 @@ static int __devinit mmci_probe(struct amba_device *dev, if (ret) goto unmap; - if (dev->irq[1] == NO_IRQ) + if (dev->irq[1] == NO_IRQ || !dev->irq[1]) host->singleirq = true; else { ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index d601e41..f4e82d4 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -463,7 +463,7 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) err = PTR_ERR(clk); goto err_clk_get; } - clk_enable(clk); + clk_prepare_enable(clk); pltfm_host->clk = clk; if (!is_imx25_esdhc(imx_data)) @@ -558,7 +558,7 @@ no_card_detect_irq: gpio_free(boarddata->wp_gpio); no_card_detect_pin: no_board_data: - clk_disable(pltfm_host->clk); + clk_disable_unprepare(pltfm_host->clk); clk_put(pltfm_host->clk); err_clk_get: kfree(imx_data); @@ -585,7 +585,7 @@ static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev) gpio_free(boarddata->cd_gpio); } - clk_disable(pltfm_host->clk); + clk_disable_unprepare(pltfm_host->clk); clk_put(pltfm_host->clk); kfree(imx_data); diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 068c356..88bbd8f 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -190,8 +190,10 @@ static struct devprobe2 isa_probes[] __initdata = { {seeq8005_probe, 0}, #endif #ifdef CONFIG_CS89x0 +#ifndef CONFIG_CS89x0_PLATFORM {cs89x0_probe, 0}, #endif +#endif #ifdef CONFIG_AT1700 {at1700_probe, 0}, #endif diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 1f8648f..8388e36 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -5,8 +5,7 @@ config NET_VENDOR_CIRRUS bool "Cirrus devices" default y - depends on ISA || EISA || MACH_IXDP2351 || ARCH_IXDP2X01 \ - || MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX) || MAC + depends on ISA || EISA || ARM || MAC ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -21,8 +20,7 @@ if NET_VENDOR_CIRRUS config CS89x0 tristate "CS89x0 support" - depends on (ISA || EISA || MACH_IXDP2351 \ - || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440) + depends on ISA || EISA || ARM ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -33,10 +31,15 @@ config CS89x0 To compile this driver as a module, choose M here. The module will be called cs89x0. -config CS89x0_NONISA_IRQ - def_bool y - depends on CS89x0 != n - depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440 +config CS89x0_PLATFORM + bool "CS89x0 platform driver support" + depends on CS89x0 + help + Say Y to compile the cs89x0 driver as a platform driver. This + makes this driver suitable for use on certain evaluation boards + such as the iMX21ADS. + + If you are unsure, say N. config EP93XX_ETH tristate "EP93xx Ethernet support" diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index f328da2..7202ca9 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -100,9 +100,6 @@ */ -/* Always include 'config.h' first in case the user wants to turn on - or override something. */ -#include <linux/module.h> /* * Set this to zero to disable DMA code @@ -131,9 +128,12 @@ */ +#include <linux/module.h> +#include <linux/printk.h> #include <linux/errno.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/platform_device.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/fcntl.h> @@ -151,6 +151,7 @@ #include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> +#include <linux/atomic.h> #if ALLOW_DMA #include <asm/dma.h> #endif @@ -174,26 +175,20 @@ static char version[] __initdata = them to system IRQ numbers. This mapping is card specific and is set to the configuration of the Cirrus Eval board for this chip. */ #if defined(CONFIG_MACH_IXDP2351) +#define CS89x0_NONISA_IRQ static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; #elif defined(CONFIG_ARCH_IXDP2X01) +#define CS89x0_NONISA_IRQ static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; -#elif defined(CONFIG_MACH_QQ2440) -#include <mach/qq2440.h> -static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 }; -static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 }; -#elif defined(CONFIG_MACH_MX31ADS) -#include <mach/board-mx31ads.h> -static unsigned int netcard_portlist[] __used __initdata = { - PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0 -}; -static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0}; #else +#ifndef CONFIG_CS89x0_PLATFORM static unsigned int netcard_portlist[] __used __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; static unsigned int cs8900_irq_map[] = {10,11,12,5}; #endif +#endif #if DEBUGGING static unsigned int net_debug = DEBUGGING; @@ -236,11 +231,16 @@ struct net_local { unsigned char *end_dma_buff; /* points to the end of the buffer */ unsigned char *rx_dma_ptr; /* points to the next packet */ #endif +#ifdef CONFIG_CS89x0_PLATFORM + void __iomem *virt_addr;/* Virtual address for accessing the CS89x0. */ + unsigned long phys_addr;/* Physical address for accessing the CS89x0. */ + unsigned long size; /* Length of CS89x0 memory region. */ +#endif }; /* Index to functions, as function prototypes. */ -static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular); +static int cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular); static int net_open(struct net_device *dev); static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev); static irqreturn_t net_interrupt(int irq, void *dev_id); @@ -294,6 +294,7 @@ static int __init media_fn(char *str) __setup("cs89x0_media=", media_fn); +#ifndef CONFIG_CS89x0_PLATFORM /* Check for a network adaptor of this type, and return '0' iff one exists. If dev->base_addr == 0, probe all likely locations. If dev->base_addr == 1, always return failure. @@ -343,6 +344,7 @@ out: return ERR_PTR(err); } #endif +#endif #if defined(CONFIG_MACH_IXDP2351) static u16 @@ -504,7 +506,7 @@ static const struct net_device_ops net_ops = { */ static int __init -cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) +cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular) { struct net_local *lp = netdev_priv(dev); static unsigned version_printed; @@ -529,15 +531,12 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) lp->force = g_cs89x0_media__force; #endif -#if defined(CONFIG_MACH_QQ2440) - lp->force |= FORCE_RJ45 | FORCE_FULL; -#endif } /* Grab the region so we can find another board if autoIRQ fails. */ /* WTF is going on here? */ if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) { - printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n", + printk(KERN_ERR "%s: request_region(0x%lx, 0x%x) failed\n", DRV_NAME, ioaddr, NETCARD_IO_EXTENT); retval = -EBUSY; goto out1; @@ -549,7 +548,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) will skip the test for the ADD_PORT. */ if (ioaddr & 1) { if (net_debug > 1) - printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr); + printk(KERN_INFO "%s: odd ioaddr 0x%lx\n", dev->name, ioaddr); if ((ioaddr & 2) != 2) if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) { printk(KERN_ERR "%s: bad signature 0x%x\n", @@ -560,13 +559,13 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) } ioaddr &= ~3; - printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n", + printk(KERN_DEBUG "PP_addr at %lx[%x]: 0x%x\n", ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT)); writeword(ioaddr, ADD_PORT, PP_ChipID); tmp = readword(ioaddr, DATA_PORT); if (tmp != CHIP_EISA_ID_SIG) { - printk(KERN_DEBUG "%s: incorrect signature at %x[%x]: 0x%x!=" + printk(KERN_DEBUG "%s: incorrect signature at %lx[%x]: 0x%x!=" CHIP_EISA_ID_SIG_STR "\n", dev->name, ioaddr, DATA_PORT, tmp); retval = -ENODEV; @@ -736,8 +735,9 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) dev->irq = i; } else { i = lp->isa_config & INT_NO_MASK; +#ifndef CONFIG_CS89x0_PLATFORM if (lp->chip_type == CS8900) { -#ifdef CONFIG_CS89x0_NONISA_IRQ +#ifdef CS89x0_NONISA_IRQ i = cs8900_irq_map[0]; #else /* Translate the IRQ using the IRQ mapping table. */ @@ -758,6 +758,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) } #endif } +#endif if (!dev->irq) dev->irq = i; } @@ -1168,6 +1169,7 @@ write_irq(struct net_device *dev, int chip_type, int irq) int i; if (chip_type == CS8900) { +#ifndef CONFIG_CS89x0_PLATFORM /* Search the mapping table for the corresponding IRQ pin. */ for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++) if (cs8900_irq_map[i] == irq) @@ -1175,6 +1177,10 @@ write_irq(struct net_device *dev, int chip_type, int irq) /* Not found */ if (i == ARRAY_SIZE(cs8900_irq_map)) i = 3; +#else + /* INTRQ0 pin is used for interrupt generation. */ + i = 0; +#endif writereg(dev, PP_CS8900_ISAINT, i); } else { writereg(dev, PP_CS8920_ISAINT, irq); @@ -1228,7 +1234,7 @@ net_open(struct net_device *dev) } else { -#ifndef CONFIG_CS89x0_NONISA_IRQ +#if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM) if (((1 << dev->irq) & lp->irq_map) == 0) { printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", dev->name, dev->irq, lp->irq_map); @@ -1746,7 +1752,7 @@ static int set_mac_address(struct net_device *dev, void *p) return 0; } -#ifdef MODULE +#if defined(MODULE) && !defined(CONFIG_CS89x0_PLATFORM) static struct net_device *dev_cs89x0; @@ -1900,7 +1906,97 @@ cleanup_module(void) release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT); free_netdev(dev_cs89x0); } -#endif /* MODULE */ +#endif /* MODULE && !CONFIG_CS89x0_PLATFORM */ + +#ifdef CONFIG_CS89x0_PLATFORM +static int __init cs89x0_platform_probe(struct platform_device *pdev) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); + struct net_local *lp; + struct resource *mem_res; + int err; + + if (!dev) + return -ENOMEM; + + lp = netdev_priv(dev); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dev->irq = platform_get_irq(pdev, 0); + if (mem_res == NULL || dev->irq <= 0) { + dev_warn(&dev->dev, "memory/interrupt resource missing.\n"); + err = -ENXIO; + goto free; + } + + lp->phys_addr = mem_res->start; + lp->size = resource_size(mem_res); + if (!request_mem_region(lp->phys_addr, lp->size, DRV_NAME)) { + dev_warn(&dev->dev, "request_mem_region() failed.\n"); + err = -EBUSY; + goto free; + } + + lp->virt_addr = ioremap(lp->phys_addr, lp->size); + if (!lp->virt_addr) { + dev_warn(&dev->dev, "ioremap() failed.\n"); + err = -ENOMEM; + goto release; + } + + err = cs89x0_probe1(dev, (unsigned long)lp->virt_addr, 0); + if (err) { + dev_warn(&dev->dev, "no cs8900 or cs8920 detected.\n"); + goto unmap; + } + + platform_set_drvdata(pdev, dev); + return 0; + +unmap: + iounmap(lp->virt_addr); +release: + release_mem_region(lp->phys_addr, lp->size); +free: + free_netdev(dev); + return err; +} + +static int cs89x0_platform_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct net_local *lp = netdev_priv(dev); + + unregister_netdev(dev); + iounmap(lp->virt_addr); + release_mem_region(lp->phys_addr, lp->size); + free_netdev(dev); + return 0; +} + +static struct platform_driver cs89x0_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .remove = cs89x0_platform_remove, +}; + +static int __init cs89x0_init(void) +{ + return platform_driver_probe(&cs89x0_driver, cs89x0_platform_probe); +} + +module_init(cs89x0_init); + +static void __exit cs89x0_cleanup(void) +{ + platform_driver_unregister(&cs89x0_driver); +} + +module_exit(cs89x0_cleanup); + +#endif /* CONFIG_CS89x0_PLATFORM */ /* * Local variables: diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 50e8e5e..7189adf 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -255,13 +255,13 @@ static inline int __init mdio_ofgpio_init(void) return platform_driver_register(&mdio_ofgpio_driver); } -static inline void __exit mdio_ofgpio_exit(void) +static inline void mdio_ofgpio_exit(void) { platform_driver_unregister(&mdio_ofgpio_driver); } #else static inline int __init mdio_ofgpio_init(void) { return 0; } -static inline void __exit mdio_ofgpio_exit(void) { } +static inline void mdio_ofgpio_exit(void) { } #endif /* CONFIG_OF_GPIO */ static struct platform_driver mdio_gpio_driver = { diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 63b3ec4..343ad29 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -55,7 +55,7 @@ EXPORT_SYMBOL(of_find_device_by_node); #include <asm/dcr.h> #endif -#if !defined(CONFIG_SPARC) +#ifdef CONFIG_OF_ADDRESS /* * The following routines scan a subtree and registers a device for * each applicable node. @@ -253,7 +253,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node, if (!of_device_is_available(node)) return NULL; - dev = kzalloc(sizeof(*dev), GFP_KERNEL); + dev = amba_device_alloc(NULL, 0, 0); if (!dev) return NULL; @@ -283,14 +283,14 @@ static struct amba_device *of_amba_device_create(struct device_node *node, if (ret) goto err_free; - ret = amba_device_register(dev, &iomem_resource); + ret = amba_device_add(dev, &iomem_resource); if (ret) goto err_free; return dev; err_free: - kfree(dev); + amba_device_put(dev); return NULL; } #else /* CONFIG_ARM_AMBA */ @@ -462,4 +462,4 @@ int of_platform_populate(struct device_node *root, of_node_put(root); return rc; } -#endif /* !CONFIG_SPARC */ +#endif /* CONFIG_OF_ADDRESS */ diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 3a125b8..59efc63 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -773,8 +773,8 @@ config RTC_DRV_EP93XX will be called rtc-ep93xx. config RTC_DRV_SA1100 - tristate "SA11x0/PXA2xx" - depends on ARCH_SA1100 || ARCH_PXA + tristate "SA11x0/PXA2xx/PXA910" + depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP help If you say Y here you will get access to the real time clock built into your SA11x0 or PXA2xx CPU. diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index aef40bd..7895186 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -35,6 +35,8 @@ enum s3c_cpu_type { TYPE_S3C2410, + TYPE_S3C2416, + TYPE_S3C2443, TYPE_S3C64XX, }; @@ -132,6 +134,7 @@ static int s3c_rtc_setfreq(struct device *dev, int freq) struct platform_device *pdev = to_platform_device(dev); struct rtc_device *rtc_dev = platform_get_drvdata(pdev); unsigned int tmp = 0; + int val; if (!is_power_of_2(freq)) return -EINVAL; @@ -139,12 +142,22 @@ static int s3c_rtc_setfreq(struct device *dev, int freq) clk_enable(rtc_clk); spin_lock_irq(&s3c_rtc_pie_lock); - if (s3c_rtc_cpu_type == TYPE_S3C2410) { + if (s3c_rtc_cpu_type != TYPE_S3C64XX) { tmp = readb(s3c_rtc_base + S3C2410_TICNT); tmp &= S3C2410_TICNT_ENABLE; } - tmp |= (rtc_dev->max_user_freq / freq)-1; + val = (rtc_dev->max_user_freq / freq) - 1; + + if (s3c_rtc_cpu_type == TYPE_S3C2416 || s3c_rtc_cpu_type == TYPE_S3C2443) { + tmp |= S3C2443_TICNT_PART(val); + writel(S3C2443_TICNT1_PART(val), s3c_rtc_base + S3C2443_TICNT1); + + if (s3c_rtc_cpu_type == TYPE_S3C2416) + writel(S3C2416_TICNT2_PART(val), s3c_rtc_base + S3C2416_TICNT2); + } else { + tmp |= val; + } writel(tmp, s3c_rtc_base + S3C2410_TICNT); spin_unlock_irq(&s3c_rtc_pie_lock); @@ -371,7 +384,7 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en) tmp &= ~S3C2410_RTCCON_RTCEN; writew(tmp, base + S3C2410_RTCCON); - if (s3c_rtc_cpu_type == TYPE_S3C2410) { + if (s3c_rtc_cpu_type != TYPE_S3C64XX) { tmp = readb(base + S3C2410_TICNT); tmp &= ~S3C2410_TICNT_ENABLE; writeb(tmp, base + S3C2410_TICNT); @@ -428,12 +441,27 @@ static int __devexit s3c_rtc_remove(struct platform_device *dev) return 0; } +static const struct of_device_id s3c_rtc_dt_match[]; + +static inline int s3c_rtc_get_driver_data(struct platform_device *pdev) +{ +#ifdef CONFIG_OF + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node); + return match->data; + } +#endif + return platform_get_device_id(pdev)->driver_data; +} + static int __devinit s3c_rtc_probe(struct platform_device *pdev) { struct rtc_device *rtc; struct rtc_time rtc_tm; struct resource *res; int ret; + int tmp; pr_debug("%s: probe=%p\n", __func__, pdev); @@ -508,13 +536,7 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev) goto err_nortc; } -#ifdef CONFIG_OF - if (pdev->dev.of_node) - s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node, - "samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410; - else -#endif - s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data; + s3c_rtc_cpu_type = s3c_rtc_get_driver_data(pdev); /* Check RTC Time */ @@ -533,11 +555,17 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "warning: invalid RTC value so initializing it\n"); } - if (s3c_rtc_cpu_type == TYPE_S3C64XX) + if (s3c_rtc_cpu_type != TYPE_S3C2410) rtc->max_user_freq = 32768; else rtc->max_user_freq = 128; + if (s3c_rtc_cpu_type == TYPE_S3C2416 || s3c_rtc_cpu_type == TYPE_S3C2443) { + tmp = readw(s3c_rtc_base + S3C2410_RTCCON); + tmp |= S3C2443_RTCCON_TICSEL; + writew(tmp, s3c_rtc_base + S3C2410_RTCCON); + } + platform_set_drvdata(pdev, rtc); s3c_rtc_setfreq(&pdev->dev, 1); @@ -638,8 +666,19 @@ static int s3c_rtc_resume(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id s3c_rtc_dt_match[] = { - { .compatible = "samsung,s3c2410-rtc" }, - { .compatible = "samsung,s3c6410-rtc" }, + { + .compatible = "samsung,s3c2410-rtc" + .data = TYPE_S3C2410, + }, { + .compatible = "samsung,s3c2416-rtc" + .data = TYPE_S3C2416, + }, { + .compatible = "samsung,s3c2443-rtc" + .data = TYPE_S3C2443, + }, { + .compatible = "samsung,s3c6410-rtc" + .data = TYPE_S3C64XX, + }, {}, }; MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match); @@ -652,6 +691,12 @@ static struct platform_device_id s3c_rtc_driver_ids[] = { .name = "s3c2410-rtc", .driver_data = TYPE_S3C2410, }, { + .name = "s3c2416-rtc", + .driver_data = TYPE_S3C2416, + }, { + .name = "s3c2443-rtc", + .driver_data = TYPE_S3C2443, + }, { .name = "s3c64xx-rtc", .driver_data = TYPE_S3C64XX, }, diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index cb9a585..962510c 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -23,10 +23,12 @@ #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/clk.h> #include <linux/rtc.h> #include <linux/init.h> #include <linux/fs.h> #include <linux/interrupt.h> +#include <linux/slab.h> #include <linux/string.h> #include <linux/pm.h> #include <linux/bitops.h> @@ -34,83 +36,30 @@ #include <mach/hardware.h> #include <asm/irq.h> -#ifdef CONFIG_ARCH_PXA +#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP) #include <mach/regs-rtc.h> #endif #define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 - -static const unsigned long RTC_FREQ = 1024; -static struct rtc_time rtc_alarm; -static DEFINE_SPINLOCK(sa1100_rtc_lock); - -static inline int rtc_periodic_alarm(struct rtc_time *tm) -{ - return (tm->tm_year == -1) || - ((unsigned)tm->tm_mon >= 12) || - ((unsigned)(tm->tm_mday - 1) >= 31) || - ((unsigned)tm->tm_hour > 23) || - ((unsigned)tm->tm_min > 59) || - ((unsigned)tm->tm_sec > 59); -} - -/* - * Calculate the next alarm time given the requested alarm time mask - * and the current time. - */ -static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, - struct rtc_time *alrm) -{ - unsigned long next_time; - unsigned long now_time; - - next->tm_year = now->tm_year; - next->tm_mon = now->tm_mon; - next->tm_mday = now->tm_mday; - next->tm_hour = alrm->tm_hour; - next->tm_min = alrm->tm_min; - next->tm_sec = alrm->tm_sec; - - rtc_tm_to_time(now, &now_time); - rtc_tm_to_time(next, &next_time); - - if (next_time < now_time) { - /* Advance one day */ - next_time += 60 * 60 * 24; - rtc_time_to_tm(next_time, next); - } -} - -static int rtc_update_alarm(struct rtc_time *alrm) -{ - struct rtc_time alarm_tm, now_tm; - unsigned long now, time; - int ret; - - do { - now = RCNR; - rtc_time_to_tm(now, &now_tm); - rtc_next_alarm_time(&alarm_tm, &now_tm, alrm); - ret = rtc_tm_to_time(&alarm_tm, &time); - if (ret != 0) - break; - - RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL); - RTAR = time; - } while (now != RCNR); - - return ret; -} +#define RTC_FREQ 1024 + +struct sa1100_rtc { + spinlock_t lock; + int irq_1hz; + int irq_alarm; + struct rtc_device *rtc; + struct clk *clk; +}; static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) { - struct platform_device *pdev = to_platform_device(dev_id); - struct rtc_device *rtc = platform_get_drvdata(pdev); + struct sa1100_rtc *info = dev_get_drvdata(dev_id); + struct rtc_device *rtc = info->rtc; unsigned int rtsr; unsigned long events = 0; - spin_lock(&sa1100_rtc_lock); + spin_lock(&info->lock); rtsr = RTSR; /* clear interrupt sources */ @@ -146,30 +95,30 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) rtc_update_irq(rtc, 1, events); - if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm)) - rtc_update_alarm(&rtc_alarm); - - spin_unlock(&sa1100_rtc_lock); + spin_unlock(&info->lock); return IRQ_HANDLED; } static int sa1100_rtc_open(struct device *dev) { + struct sa1100_rtc *info = dev_get_drvdata(dev); + struct rtc_device *rtc = info->rtc; int ret; - struct platform_device *plat_dev = to_platform_device(dev); - struct rtc_device *rtc = platform_get_drvdata(plat_dev); - ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED, + ret = clk_prepare_enable(info->clk); + if (ret) + goto fail_clk; + ret = request_irq(info->irq_1hz, sa1100_rtc_interrupt, IRQF_DISABLED, "rtc 1Hz", dev); if (ret) { - dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz); + dev_err(dev, "IRQ %d already in use.\n", info->irq_1hz); goto fail_ui; } - ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED, + ret = request_irq(info->irq_alarm, sa1100_rtc_interrupt, IRQF_DISABLED, "rtc Alrm", dev); if (ret) { - dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm); + dev_err(dev, "IRQ %d already in use.\n", info->irq_alarm); goto fail_ai; } rtc->max_user_freq = RTC_FREQ; @@ -178,29 +127,36 @@ static int sa1100_rtc_open(struct device *dev) return 0; fail_ai: - free_irq(IRQ_RTC1Hz, dev); + free_irq(info->irq_1hz, dev); fail_ui: + clk_disable_unprepare(info->clk); + fail_clk: return ret; } static void sa1100_rtc_release(struct device *dev) { - spin_lock_irq(&sa1100_rtc_lock); + struct sa1100_rtc *info = dev_get_drvdata(dev); + + spin_lock_irq(&info->lock); RTSR = 0; - spin_unlock_irq(&sa1100_rtc_lock); + spin_unlock_irq(&info->lock); - free_irq(IRQ_RTCAlrm, dev); - free_irq(IRQ_RTC1Hz, dev); + free_irq(info->irq_alarm, dev); + free_irq(info->irq_1hz, dev); + clk_disable_unprepare(info->clk); } static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) { - spin_lock_irq(&sa1100_rtc_lock); + struct sa1100_rtc *info = dev_get_drvdata(dev); + + spin_lock_irq(&info->lock); if (enabled) RTSR |= RTSR_ALE; else RTSR &= ~RTSR_ALE; - spin_unlock_irq(&sa1100_rtc_lock); + spin_unlock_irq(&info->lock); return 0; } @@ -225,7 +181,6 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { u32 rtsr; - memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time)); rtsr = RTSR; alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0; alrm->pending = (rtsr & RTSR_AL) ? 1 : 0; @@ -234,17 +189,22 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { + struct sa1100_rtc *info = dev_get_drvdata(dev); + unsigned long time; int ret; - spin_lock_irq(&sa1100_rtc_lock); - ret = rtc_update_alarm(&alrm->time); - if (ret == 0) { - if (alrm->enabled) - RTSR |= RTSR_ALE; - else - RTSR &= ~RTSR_ALE; - } - spin_unlock_irq(&sa1100_rtc_lock); + spin_lock_irq(&info->lock); + ret = rtc_tm_to_time(&alrm->time, &time); + if (ret != 0) + goto out; + RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL); + RTAR = time; + if (alrm->enabled) + RTSR |= RTSR_ALE; + else + RTSR &= ~RTSR_ALE; +out: + spin_unlock_irq(&info->lock); return ret; } @@ -271,6 +231,27 @@ static const struct rtc_class_ops sa1100_rtc_ops = { static int sa1100_rtc_probe(struct platform_device *pdev) { struct rtc_device *rtc; + struct sa1100_rtc *info; + int irq_1hz, irq_alarm, ret = 0; + + irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz"); + irq_alarm = platform_get_irq_byname(pdev, "rtc alarm"); + if (irq_1hz < 0 || irq_alarm < 0) + return -ENODEV; + + info = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL); + if (!info) + return -ENOMEM; + info->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(info->clk)) { + dev_err(&pdev->dev, "failed to find rtc clock source\n"); + ret = PTR_ERR(info->clk); + goto err_clk; + } + info->irq_1hz = irq_1hz; + info->irq_alarm = irq_alarm; + spin_lock_init(&info->lock); + platform_set_drvdata(pdev, info); /* * According to the manual we should be able to let RTTR be zero @@ -292,10 +273,11 @@ static int sa1100_rtc_probe(struct platform_device *pdev) rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops, THIS_MODULE); - if (IS_ERR(rtc)) - return PTR_ERR(rtc); - - platform_set_drvdata(pdev, rtc); + if (IS_ERR(rtc)) { + ret = PTR_ERR(rtc); + goto err_dev; + } + info->rtc = rtc; /* Fix for a nasty initialization problem the in SA11xx RTSR register. * See also the comments in sa1100_rtc_interrupt(). @@ -322,14 +304,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev) RTSR = RTSR_AL | RTSR_HZ; return 0; +err_dev: + platform_set_drvdata(pdev, NULL); + clk_put(info->clk); +err_clk: + kfree(info); + return ret; } static int sa1100_rtc_remove(struct platform_device *pdev) { - struct rtc_device *rtc = platform_get_drvdata(pdev); + struct sa1100_rtc *info = platform_get_drvdata(pdev); - if (rtc) - rtc_device_unregister(rtc); + if (info) { + rtc_device_unregister(info->rtc); + clk_put(info->clk); + platform_set_drvdata(pdev, NULL); + kfree(info); + } return 0; } @@ -337,15 +329,17 @@ static int sa1100_rtc_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int sa1100_rtc_suspend(struct device *dev) { + struct sa1100_rtc *info = dev_get_drvdata(dev); if (device_may_wakeup(dev)) - enable_irq_wake(IRQ_RTCAlrm); + enable_irq_wake(info->irq_alarm); return 0; } static int sa1100_rtc_resume(struct device *dev) { + struct sa1100_rtc *info = dev_get_drvdata(dev); if (device_may_wakeup(dev)) - disable_irq_wake(IRQ_RTCAlrm); + disable_irq_wake(info->irq_alarm); return 0; } diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 0b7fed7..e7fecee 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1508,7 +1508,7 @@ static int serial_imx_probe(struct platform_device *pdev) ret = PTR_ERR(sport->clk); goto unmap; } - clk_enable(sport->clk); + clk_prepare_enable(sport->clk); sport->port.uartclk = clk_get_rate(sport->clk); @@ -1531,8 +1531,8 @@ deinit: if (pdata && pdata->exit) pdata->exit(pdev); clkput: + clk_disable_unprepare(sport->clk); clk_put(sport->clk); - clk_disable(sport->clk); unmap: iounmap(sport->port.membase); free: @@ -1552,11 +1552,10 @@ static int serial_imx_remove(struct platform_device *pdev) if (sport) { uart_remove_one_port(&imx_reg, &sport->port); + clk_disable_unprepare(sport->clk); clk_put(sport->clk); } - clk_disable(sport->clk); - if (pdata && pdata->exit) pdata->exit(pdev); diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 7ecb68a..85ae4b4 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -137,7 +137,7 @@ choice config USB_AT91 tristate "Atmel AT91 USB Device Port" - depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45 + depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45 help Many Atmel AT91 processors (such as the AT91RM2000) have a full speed USB Device Port with support for five configurable @@ -150,7 +150,7 @@ config USB_AT91 config USB_ATMEL_USBA tristate "Atmel USBA" select USB_GADGET_DUALSPEED - depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 + depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 help USBA is the integrated high-speed USB Device controller on the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. |