summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/crypto/hifn_795x.c110
1 files changed, 108 insertions, 2 deletions
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index bf817d4..de594bc 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/mod_devicetable.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
@@ -47,6 +48,11 @@
#define dprintk(f, a...) do {} while (0)
#endif
+static char hifn_pll_ref[sizeof("extNNN")] = "ext";
+module_param_string(hifn_pll_ref, hifn_pll_ref, sizeof(hifn_pll_ref), 0444);
+MODULE_PARM_DESC(hifn_pll_ref,
+ "PLL reference clock (pci[freq] or ext[freq], default ext)");
+
static atomic_t hifn_dev_number;
#define ACRYPTO_OP_DECRYPT 0
@@ -286,7 +292,26 @@ static atomic_t hifn_dev_number;
#define HIFN_DMACNFG_DMARESET 0x00000002 /* DMA Reset # */
#define HIFN_DMACNFG_MSTRESET 0x00000001 /* Master Reset # */
-#define HIFN_PLL_7956 0x00001d18 /* 7956 PLL config value */
+/* PLL configuration register */
+#define HIFN_PLL_REF_CLK_HBI 0x00000000 /* HBI reference clock */
+#define HIFN_PLL_REF_CLK_PLL 0x00000001 /* PLL reference clock */
+#define HIFN_PLL_BP 0x00000002 /* Reference clock bypass */
+#define HIFN_PLL_PK_CLK_HBI 0x00000000 /* PK engine HBI clock */
+#define HIFN_PLL_PK_CLK_PLL 0x00000008 /* PK engine PLL clock */
+#define HIFN_PLL_PE_CLK_HBI 0x00000000 /* PE engine HBI clock */
+#define HIFN_PLL_PE_CLK_PLL 0x00000010 /* PE engine PLL clock */
+#define HIFN_PLL_RESERVED_1 0x00000400 /* Reserved bit, must be 1 */
+#define HIFN_PLL_ND_SHIFT 11 /* Clock multiplier shift */
+#define HIFN_PLL_ND_MULT_2 0x00000000 /* PLL clock multiplier 2 */
+#define HIFN_PLL_ND_MULT_4 0x00000800 /* PLL clock multiplier 4 */
+#define HIFN_PLL_ND_MULT_6 0x00001000 /* PLL clock multiplier 6 */
+#define HIFN_PLL_ND_MULT_8 0x00001800 /* PLL clock multiplier 8 */
+#define HIFN_PLL_ND_MULT_10 0x00002000 /* PLL clock multiplier 10 */
+#define HIFN_PLL_ND_MULT_12 0x00002800 /* PLL clock multiplier 12 */
+#define HIFN_PLL_IS_1_8 0x00000000 /* charge pump (mult. 1-8) */
+#define HIFN_PLL_IS_9_12 0x00010000 /* charge pump (mult. 9-12) */
+
+#define HIFN_PLL_FCK_MAX 266 /* Maximum PLL frequency */
/* Public key reset register (HIFN_1_PUB_RESET) */
#define HIFN_PUBRST_RESET 0x00000001 /* reset public/rng unit */
@@ -871,6 +896,64 @@ static void hifn_init_dma(struct hifn_device *dev)
dma->cmdk = dma->srck = dma->dstk = dma->resk = 0;
}
+/*
+ * Initialize the PLL. We need to know the frequency of the reference clock
+ * to calculate the optimal multiplier. For PCI we assume 66MHz, since that
+ * allows us to operate without the risk of overclocking the chip. If it
+ * actually uses 33MHz, the chip will operate at half the speed, this can be
+ * overriden by specifying the frequency as module parameter (pci33).
+ *
+ * Unfortunately the PCI clock is not very suitable since the HIFN needs a
+ * stable clock and the PCI clock frequency may vary, so the default is the
+ * external clock. There is no way to find out its frequency, we default to
+ * 66MHz since according to Mike Ham of HiFn, almost every board in existence
+ * has an external crystal populated at 66MHz.
+ */
+static void hifn_init_pll(struct hifn_device *dev)
+{
+ unsigned int freq, m;
+ u32 pllcfg;
+
+ pllcfg = HIFN_1_PLL | HIFN_PLL_RESERVED_1;
+
+ if (strncmp(hifn_pll_ref, "ext", 3) == 0)
+ pllcfg |= HIFN_PLL_REF_CLK_PLL;
+ else
+ pllcfg |= HIFN_PLL_REF_CLK_HBI;
+
+ if (hifn_pll_ref[3] != '\0')
+ freq = simple_strtoul(hifn_pll_ref + 3, NULL, 10);
+ else {
+ freq = 66;
+ printk(KERN_INFO "hifn795x: assuming %uMHz clock speed, "
+ "override with hifn_pll_ref=%.3s<frequency>\n",
+ freq, hifn_pll_ref);
+ }
+
+ m = HIFN_PLL_FCK_MAX / freq;
+
+ pllcfg |= (m / 2 - 1) << HIFN_PLL_ND_SHIFT;
+ if (m <= 8)
+ pllcfg |= HIFN_PLL_IS_1_8;
+ else
+ pllcfg |= HIFN_PLL_IS_9_12;
+
+ /* Select clock source and enable clock bypass */
+ hifn_write_1(dev, HIFN_1_PLL, pllcfg |
+ HIFN_PLL_PK_CLK_HBI | HIFN_PLL_PE_CLK_HBI | HIFN_PLL_BP);
+
+ /* Let the chip lock to the input clock */
+ mdelay(10);
+
+ /* Disable clock bypass */
+ hifn_write_1(dev, HIFN_1_PLL, pllcfg |
+ HIFN_PLL_PK_CLK_HBI | HIFN_PLL_PE_CLK_HBI);
+
+ /* Switch the engines to the PLL */
+ hifn_write_1(dev, HIFN_1_PLL, pllcfg |
+ HIFN_PLL_PK_CLK_PLL | HIFN_PLL_PE_CLK_PLL);
+}
+
static void hifn_init_registers(struct hifn_device *dev)
{
u32 dptr = dev->desc_dma;
@@ -938,7 +1021,7 @@ static void hifn_init_registers(struct hifn_device *dev)
#else
hifn_write_0(dev, HIFN_0_PUCNFG, 0x10342);
#endif
- hifn_write_1(dev, HIFN_1_PLL, HIFN_PLL_7956);
+ hifn_init_pll(dev);
hifn_write_0(dev, HIFN_0_PUISR, HIFN_PUISR_DSTOVER);
hifn_write_1(dev, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET |
@@ -2621,8 +2704,31 @@ static struct pci_driver hifn_pci_driver = {
static int __devinit hifn_init(void)
{
+ unsigned int freq;
int err;
+ if (strncmp(hifn_pll_ref, "ext", 3) &&
+ strncmp(hifn_pll_ref, "pci", 3)) {
+ printk(KERN_ERR "hifn795x: invalid hifn_pll_ref clock, "
+ "must be pci or ext");
+ return -EINVAL;
+ }
+
+ /*
+ * For the 7955/7956 the reference clock frequency must be in the
+ * range of 20MHz-100MHz. For the 7954 the upper bound is 66.67MHz,
+ * but this chip is currently not supported.
+ */
+ if (hifn_pll_ref[3] != '\0') {
+ freq = simple_strtoul(hifn_pll_ref + 3, NULL, 10);
+ if (freq < 20 || freq > 100) {
+ printk(KERN_ERR "hifn795x: invalid hifn_pll_ref "
+ "frequency, must be in the range "
+ "of 20-100");
+ return -EINVAL;
+ }
+ }
+
err = pci_register_driver(&hifn_pci_driver);
if (err < 0) {
dprintk("Failed to register PCI driver for %s device.\n",
OpenPOWER on IntegriCloud