5 files changed, 683 insertions, 280 deletions
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 904c25f..68fd766 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -92,7 +92,9 @@ enum {
 	HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */
 
 	/* HOST_CAP bits */
+	HOST_CAP_SSC		= (1 << 14), /* Slumber capable */
 	HOST_CAP_CLO		= (1 << 24), /* Command List Override support */
+	HOST_CAP_SSS		= (1 << 27), /* Staggered Spin-up */
 	HOST_CAP_NCQ		= (1 << 30), /* Native Command Queueing */
 	HOST_CAP_64		= (1 << 31), /* PCI DAC (64-bit DMA) support */
 
@@ -155,6 +157,7 @@ enum {
 	PORT_CMD_SPIN_UP	= (1 << 1), /* Spin up device */
 	PORT_CMD_START		= (1 << 0), /* Enable port DMA engine */
 
+	PORT_CMD_ICC_MASK	= (0xf << 28), /* i/f ICC state mask */
 	PORT_CMD_ICC_ACTIVE	= (0x1 << 28), /* Put i/f in active state */
 	PORT_CMD_ICC_PARTIAL	= (0x2 << 28), /* Put i/f in partial state */
 	PORT_CMD_ICC_SLUMBER	= (0x6 << 28), /* Put i/f in slumber state */
@@ -212,6 +215,10 @@ static void ahci_freeze(struct ata_port *ap);
 static void ahci_thaw(struct ata_port *ap);
 static void ahci_error_handler(struct ata_port *ap);
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
+static int ahci_port_resume(struct ata_port *ap);
+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
+static int ahci_pci_device_resume(struct pci_dev *pdev);
 static void ahci_remove_one (struct pci_dev *pdev);
 
 static struct scsi_host_template ahci_sht = {
@@ -231,6 +238,8 @@ static struct scsi_host_template ahci_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.suspend		= ata_scsi_device_suspend,
+	.resume			= ata_scsi_device_resume,
 };
 
 static const struct ata_port_operations ahci_ops = {
@@ -257,6 +266,9 @@ static const struct ata_port_operations ahci_ops = {
 	.error_handler		= ahci_error_handler,
 	.post_internal_cmd	= ahci_post_internal_cmd,
 
+	.port_suspend		= ahci_port_suspend,
+	.port_resume		= ahci_port_resume,
+
 	.port_start		= ahci_port_start,
 	.port_stop		= ahci_port_stop,
 };
@@ -350,6 +362,14 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VENDOR_ID_NVIDIA, 0x044f, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 	  board_ahci },		/* MCP65 */
 
+	/* SiS */
+	{ PCI_VENDOR_ID_SI, 0x1184, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	  board_ahci }, /* SiS 966 */
+	{ PCI_VENDOR_ID_SI, 0x1185, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	  board_ahci }, /* SiS 966 */
+	{ PCI_VENDOR_ID_SI, 0x0186, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	  board_ahci }, /* SiS 968 */
+
 	{ }	/* terminate list */
 };
 
@@ -358,6 +378,8 @@ static struct pci_driver ahci_pci_driver = {
 	.name			= DRV_NAME,
 	.id_table		= ahci_pci_tbl,
 	.probe			= ahci_init_one,
+	.suspend		= ahci_pci_device_suspend,
+	.resume			= ahci_pci_device_resume,
 	.remove			= ahci_remove_one,
 };
 
@@ -372,177 +394,288 @@ static inline void __iomem *ahci_port_base (void __iomem *base, unsigned int por
 	return (void __iomem *) ahci_port_base_ul((unsigned long)base, port);
 }
 
-static int ahci_port_start(struct ata_port *ap)
+static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in)
 {
-	struct device *dev = ap->host_set->dev;
-	struct ahci_host_priv *hpriv = ap->host_set->private_data;
-	struct ahci_port_priv *pp;
-	void __iomem *mmio = ap->host_set->mmio_base;
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
-	void *mem;
-	dma_addr_t mem_dma;
-	int rc;
-
-	pp = kmalloc(sizeof(*pp), GFP_KERNEL);
-	if (!pp)
-		return -ENOMEM;
-	memset(pp, 0, sizeof(*pp));
+	unsigned int sc_reg;
 
-	rc = ata_pad_alloc(ap, dev);
-	if (rc) {
-		kfree(pp);
-		return rc;
+	switch (sc_reg_in) {
+	case SCR_STATUS:	sc_reg = 0; break;
+	case SCR_CONTROL:	sc_reg = 1; break;
+	case SCR_ERROR:		sc_reg = 2; break;
+	case SCR_ACTIVE:	sc_reg = 3; break;
+	default:
+		return 0xffffffffU;
 	}
 
-	mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL);
-	if (!mem) {
-		ata_pad_free(ap, dev);
-		kfree(pp);
-		return -ENOMEM;
-	}
-	memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
+	return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
 
-	/*
-	 * First item in chunk of DMA memory: 32-slot command table,
-	 * 32 bytes each in size
-	 */
-	pp->cmd_slot = mem;
-	pp->cmd_slot_dma = mem_dma;
 
-	mem += AHCI_CMD_SLOT_SZ;
-	mem_dma += AHCI_CMD_SLOT_SZ;
+static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in,
+			       u32 val)
+{
+	unsigned int sc_reg;
 
-	/*
-	 * Second item: Received-FIS area
-	 */
-	pp->rx_fis = mem;
-	pp->rx_fis_dma = mem_dma;
+	switch (sc_reg_in) {
+	case SCR_STATUS:	sc_reg = 0; break;
+	case SCR_CONTROL:	sc_reg = 1; break;
+	case SCR_ERROR:		sc_reg = 2; break;
+	case SCR_ACTIVE:	sc_reg = 3; break;
+	default:
+		return;
+	}
 
-	mem += AHCI_RX_FIS_SZ;
-	mem_dma += AHCI_RX_FIS_SZ;
+	writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
 
-	/*
-	 * Third item: data area for storing a single command
-	 * and its scatter-gather table
-	 */
-	pp->cmd_tbl = mem;
-	pp->cmd_tbl_dma = mem_dma;
+static void ahci_start_engine(void __iomem *port_mmio)
+{
+	u32 tmp;
 
-	ap->private_data = pp;
+	/* start DMA */
+	tmp = readl(port_mmio + PORT_CMD);
+	tmp |= PORT_CMD_START;
+	writel(tmp, port_mmio + PORT_CMD);
+	readl(port_mmio + PORT_CMD); /* flush */
+}
 
-	if (hpriv->cap & HOST_CAP_64)
-		writel((pp->cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI);
-	writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
-	readl(port_mmio + PORT_LST_ADDR); /* flush */
+static int ahci_stop_engine(void __iomem *port_mmio)
+{
+	u32 tmp;
 
-	if (hpriv->cap & HOST_CAP_64)
-		writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI);
-	writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
-	readl(port_mmio + PORT_FIS_ADDR); /* flush */
+	tmp = readl(port_mmio + PORT_CMD);
 
-	writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
-	       PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
-	       PORT_CMD_START, port_mmio + PORT_CMD);
-	readl(port_mmio + PORT_CMD); /* flush */
+	/* check if the HBA is idle */
+	if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
+		return 0;
+
+	/* setting HBA to idle */
+	tmp &= ~PORT_CMD_START;
+	writel(tmp, port_mmio + PORT_CMD);
+
+	/* wait for engine to stop. This could be as long as 500 msec */
+	tmp = ata_wait_register(port_mmio + PORT_CMD,
+			        PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
+	if (tmp & PORT_CMD_LIST_ON)
+		return -EIO;
 
 	return 0;
 }
 
+static void ahci_start_fis_rx(void __iomem *port_mmio, u32 cap,
+			      dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma)
+{
+	u32 tmp;
+
+	/* set FIS registers */
+	if (cap & HOST_CAP_64)
+		writel((cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI);
+	writel(cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
 
-static void ahci_port_stop(struct ata_port *ap)
+	if (cap & HOST_CAP_64)
+		writel((rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI);
+	writel(rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
+
+	/* enable FIS reception */
+	tmp = readl(port_mmio + PORT_CMD);
+	tmp |= PORT_CMD_FIS_RX;
+	writel(tmp, port_mmio + PORT_CMD);
+
+	/* flush */
+	readl(port_mmio + PORT_CMD);
+}
+
+static int ahci_stop_fis_rx(void __iomem *port_mmio)
 {
-	struct device *dev = ap->host_set->dev;
-	struct ahci_port_priv *pp = ap->private_data;
-	void __iomem *mmio = ap->host_set->mmio_base;
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	u32 tmp;
 
+	/* disable FIS reception */
 	tmp = readl(port_mmio + PORT_CMD);
-	tmp &= ~(PORT_CMD_START | PORT_CMD_FIS_RX);
+	tmp &= ~PORT_CMD_FIS_RX;
 	writel(tmp, port_mmio + PORT_CMD);
-	readl(port_mmio + PORT_CMD); /* flush */
 
-	/* spec says 500 msecs for each PORT_CMD_{START,FIS_RX} bit, so
-	 * this is slightly incorrect.
-	 */
-	msleep(500);
+	/* wait for completion, spec says 500ms, give it 1000 */
+	tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
+				PORT_CMD_FIS_ON, 10, 1000);
+	if (tmp & PORT_CMD_FIS_ON)
+		return -EBUSY;
 
-	ap->private_data = NULL;
-	dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ,
-			  pp->cmd_slot, pp->cmd_slot_dma);
-	ata_pad_free(ap, dev);
-	kfree(pp);
+	return 0;
 }
 
-static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in)
+static void ahci_power_up(void __iomem *port_mmio, u32 cap)
 {
-	unsigned int sc_reg;
+	u32 cmd;
 
-	switch (sc_reg_in) {
-	case SCR_STATUS:	sc_reg = 0; break;
-	case SCR_CONTROL:	sc_reg = 1; break;
-	case SCR_ERROR:		sc_reg = 2; break;
-	case SCR_ACTIVE:	sc_reg = 3; break;
-	default:
-		return 0xffffffffU;
+	cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+
+	/* spin up device */
+	if (cap & HOST_CAP_SSS) {
+		cmd |= PORT_CMD_SPIN_UP;
+		writel(cmd, port_mmio + PORT_CMD);
 	}
 
-	return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
+	/* wake up link */
+	writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
 }
 
+static void ahci_power_down(void __iomem *port_mmio, u32 cap)
+{
+	u32 cmd, scontrol;
 
-static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in,
-			       u32 val)
+	cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+
+	if (cap & HOST_CAP_SSC) {
+		/* enable transitions to slumber mode */
+		scontrol = readl(port_mmio + PORT_SCR_CTL);
+		if ((scontrol & 0x0f00) > 0x100) {
+			scontrol &= ~0xf00;
+			writel(scontrol, port_mmio + PORT_SCR_CTL);
+		}
+
+		/* put device into slumber mode */
+		writel(cmd | PORT_CMD_ICC_SLUMBER, port_mmio + PORT_CMD);
+
+		/* wait for the transition to complete */
+		ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_ICC_SLUMBER,
+				  PORT_CMD_ICC_SLUMBER, 1, 50);
+	}
+
+	/* put device into listen mode */
+	if (cap & HOST_CAP_SSS) {
+		/* first set PxSCTL.DET to 0 */
+		scontrol = readl(port_mmio + PORT_SCR_CTL);
+		scontrol &= ~0xf;
+		writel(scontrol, port_mmio + PORT_SCR_CTL);
+
+		/* then set PxCMD.SUD to 0 */
+		cmd &= ~PORT_CMD_SPIN_UP;
+		writel(cmd, port_mmio + PORT_CMD);
+	}
+}
+
+static void ahci_init_port(void __iomem *port_mmio, u32 cap,
+			   dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma)
 {
-	unsigned int sc_reg;
+	/* power up */
+	ahci_power_up(port_mmio, cap);
 
-	switch (sc_reg_in) {
-	case SCR_STATUS:	sc_reg = 0; break;
-	case SCR_CONTROL:	sc_reg = 1; break;
-	case SCR_ERROR:		sc_reg = 2; break;
-	case SCR_ACTIVE:	sc_reg = 3; break;
-	default:
-		return;
+	/* enable FIS reception */
+	ahci_start_fis_rx(port_mmio, cap, cmd_slot_dma, rx_fis_dma);
+
+	/* enable DMA */
+	ahci_start_engine(port_mmio);
+}
+
+static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg)
+{
+	int rc;
+
+	/* disable DMA */
+	rc = ahci_stop_engine(port_mmio);
+	if (rc) {
+		*emsg = "failed to stop engine";
+		return rc;
 	}
 
-	writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
+	/* disable FIS reception */
+	rc = ahci_stop_fis_rx(port_mmio);
+	if (rc) {
+		*emsg = "failed stop FIS RX";
+		return rc;
+	}
+
+	/* put device into slumber mode */
+	ahci_power_down(port_mmio, cap);
+
+	return 0;
 }
 
-static int ahci_stop_engine(struct ata_port *ap)
+static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
 {
-	void __iomem *mmio = ap->host_set->mmio_base;
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
-	int work;
-	u32 tmp;
+	u32 cap_save, tmp;
 
-	tmp = readl(port_mmio + PORT_CMD);
-	tmp &= ~PORT_CMD_START;
-	writel(tmp, port_mmio + PORT_CMD);
+	cap_save = readl(mmio + HOST_CAP);
+	cap_save &= ( (1<<28) | (1<<17) );
+	cap_save |= (1 << 27);
 
-	/* wait for engine to stop.  TODO: this could be
-	 * as long as 500 msec
+	/* global controller reset */
+	tmp = readl(mmio + HOST_CTL);
+	if ((tmp & HOST_RESET) == 0) {
+		writel(tmp | HOST_RESET, mmio + HOST_CTL);
+		readl(mmio + HOST_CTL); /* flush */
+	}
+
+	/* reset must complete within 1 second, or
+	 * the hardware should be considered fried.
 	 */
-	work = 1000;
-	while (work-- > 0) {
-		tmp = readl(port_mmio + PORT_CMD);
-		if ((tmp & PORT_CMD_LIST_ON) == 0)
-			return 0;
-		udelay(10);
+	ssleep(1);
+
+	tmp = readl(mmio + HOST_CTL);
+	if (tmp & HOST_RESET) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "controller reset failed (0x%x)\n", tmp);
+		return -EIO;
 	}
 
-	return -EIO;
+	writel(HOST_AHCI_EN, mmio + HOST_CTL);
+	(void) readl(mmio + HOST_CTL);	/* flush */
+	writel(cap_save, mmio + HOST_CAP);
+	writel(0xf, mmio + HOST_PORTS_IMPL);
+	(void) readl(mmio + HOST_PORTS_IMPL);	/* flush */
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+		u16 tmp16;
+
+		/* configure PCS */
+		pci_read_config_word(pdev, 0x92, &tmp16);
+		tmp16 |= 0xf;
+		pci_write_config_word(pdev, 0x92, tmp16);
+	}
+
+	return 0;
 }
 
-static void ahci_start_engine(struct ata_port *ap)
+static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev,
+				 int n_ports, u32 cap)
 {
-	void __iomem *mmio = ap->host_set->mmio_base;
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	int i, rc;
 	u32 tmp;
 
-	tmp = readl(port_mmio + PORT_CMD);
-	tmp |= PORT_CMD_START;
-	writel(tmp, port_mmio + PORT_CMD);
-	readl(port_mmio + PORT_CMD); /* flush */
+	for (i = 0; i < n_ports; i++) {
+		void __iomem *port_mmio = ahci_port_base(mmio, i);
+		const char *emsg = NULL;
+
+#if 0 /* BIOSen initialize this incorrectly */
+		if (!(hpriv->port_map & (1 << i)))
+			continue;
+#endif
+
+		/* make sure port is not active */
+		rc = ahci_deinit_port(port_mmio, cap, &emsg);
+		if (rc)
+			dev_printk(KERN_WARNING, &pdev->dev,
+				   "%s (%d)\n", emsg, rc);
+
+		/* clear SError */
+		tmp = readl(port_mmio + PORT_SCR_ERR);
+		VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
+		writel(tmp, port_mmio + PORT_SCR_ERR);
+
+		/* clear port IRQ */
+		tmp = readl(port_mmio + PORT_IRQ_STAT);
+		VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
+		if (tmp)
+			writel(tmp, port_mmio + PORT_IRQ_STAT);
+
+		writel(1 << i, mmio + HOST_IRQ_STAT);
+	}
+
+	tmp = readl(mmio + HOST_CTL);
+	VPRINTK("HOST_CTL 0x%x\n", tmp);
+	writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
+	tmp = readl(mmio + HOST_CTL);
+	VPRINTK("HOST_CTL 0x%x\n", tmp);
 }
 
 static unsigned int ahci_dev_classify(struct ata_port *ap)
@@ -626,7 +759,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 	}
 
 	/* prepare for SRST (AHCI-1.1 10.4.1) */
-	rc = ahci_stop_engine(ap);
+	rc = ahci_stop_engine(port_mmio);
 	if (rc) {
 		reason = "failed to stop engine";
 		goto fail_restart;
@@ -647,7 +780,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 	}
 
 	/* restart engine */
-	ahci_start_engine(ap);
+	ahci_start_engine(port_mmio);
 
 	ata_tf_init(ap->device, &tf);
 	fis = pp->cmd_tbl;
@@ -706,7 +839,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 	return 0;
 
  fail_restart:
-	ahci_start_engine(ap);
+	ahci_start_engine(port_mmio);
  fail:
 	ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason);
 	return rc;
@@ -717,11 +850,13 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
 	struct ahci_port_priv *pp = ap->private_data;
 	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
 	struct ata_taskfile tf;
+	void __iomem *mmio = ap->host_set->mmio_base;
+	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	int rc;
 
 	DPRINTK("ENTER\n");
 
-	ahci_stop_engine(ap);
+	ahci_stop_engine(port_mmio);
 
 	/* clear D2H reception area to properly wait for D2H FIS */
 	ata_tf_init(ap->device, &tf);
@@ -730,7 +865,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
 
 	rc = sata_std_hardreset(ap, class);
 
-	ahci_start_engine(ap);
+	ahci_start_engine(port_mmio);
 
 	if (rc == 0 && ata_port_online(ap))
 		*class = ahci_dev_classify(ap);
@@ -1046,10 +1181,13 @@ static void ahci_thaw(struct ata_port *ap)
 
 static void ahci_error_handler(struct ata_port *ap)
 {
+	void __iomem *mmio = ap->host_set->mmio_base;
+	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+
 	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
 		/* restart engine */
-		ahci_stop_engine(ap);
-		ahci_start_engine(ap);
+		ahci_stop_engine(port_mmio);
+		ahci_start_engine(port_mmio);
 	}
 
 	/* perform recovery */
@@ -1060,15 +1198,176 @@ static void ahci_error_handler(struct ata_port *ap)
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
+	void __iomem *mmio = ap->host_set->mmio_base;
+	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 
 	if (qc->flags & ATA_QCFLAG_FAILED)
 		qc->err_mask |= AC_ERR_OTHER;
 
 	if (qc->err_mask) {
 		/* make DMA engine forget about the failed command */
-		ahci_stop_engine(ap);
-		ahci_start_engine(ap);
+		ahci_stop_engine(port_mmio);
+		ahci_start_engine(port_mmio);
+	}
+}
+
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
+{
+	struct ahci_host_priv *hpriv = ap->host_set->private_data;
+	struct ahci_port_priv *pp = ap->private_data;
+	void __iomem *mmio = ap->host_set->mmio_base;
+	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	const char *emsg = NULL;
+	int rc;
+
+	rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg);
+	if (rc) {
+		ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
+		ahci_init_port(port_mmio, hpriv->cap,
+			       pp->cmd_slot_dma, pp->rx_fis_dma);
 	}
+
+	return rc;
+}
+
+static int ahci_port_resume(struct ata_port *ap)
+{
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ahci_host_priv *hpriv = ap->host_set->private_data;
+	void __iomem *mmio = ap->host_set->mmio_base;
+	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+
+	ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma);
+
+	return 0;
+}
+
+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+	struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+	void __iomem *mmio = host_set->mmio_base;
+	u32 ctl;
+
+	if (mesg.event == PM_EVENT_SUSPEND) {
+		/* AHCI spec rev1.1 section 8.3.3:
+		 * Software must disable interrupts prior to requesting a
+		 * transition of the HBA to D3 state.
+		 */
+		ctl = readl(mmio + HOST_CTL);
+		ctl &= ~HOST_IRQ_EN;
+		writel(ctl, mmio + HOST_CTL);
+		readl(mmio + HOST_CTL); /* flush */
+	}
+
+	return ata_pci_device_suspend(pdev, mesg);
+}
+
+static int ahci_pci_device_resume(struct pci_dev *pdev)
+{
+	struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+	struct ahci_host_priv *hpriv = host_set->private_data;
+	void __iomem *mmio = host_set->mmio_base;
+	int rc;
+
+	ata_pci_device_do_resume(pdev);
+
+	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+		rc = ahci_reset_controller(mmio, pdev);
+		if (rc)
+			return rc;
+
+		ahci_init_controller(mmio, pdev, host_set->n_ports, hpriv->cap);
+	}
+
+	ata_host_set_resume(host_set);
+
+	return 0;
+}
+
+static int ahci_port_start(struct ata_port *ap)
+{
+	struct device *dev = ap->host_set->dev;
+	struct ahci_host_priv *hpriv = ap->host_set->private_data;
+	struct ahci_port_priv *pp;
+	void __iomem *mmio = ap->host_set->mmio_base;
+	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	void *mem;
+	dma_addr_t mem_dma;
+	int rc;
+
+	pp = kmalloc(sizeof(*pp), GFP_KERNEL);
+	if (!pp)
+		return -ENOMEM;
+	memset(pp, 0, sizeof(*pp));
+
+	rc = ata_pad_alloc(ap, dev);
+	if (rc) {
+		kfree(pp);
+		return rc;
+	}
+
+	mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL);
+	if (!mem) {
+		ata_pad_free(ap, dev);
+		kfree(pp);
+		return -ENOMEM;
+	}
+	memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
+
+	/*
+	 * First item in chunk of DMA memory: 32-slot command table,
+	 * 32 bytes each in size
+	 */
+	pp->cmd_slot = mem;
+	pp->cmd_slot_dma = mem_dma;
+
+	mem += AHCI_CMD_SLOT_SZ;
+	mem_dma += AHCI_CMD_SLOT_SZ;
+
+	/*
+	 * Second item: Received-FIS area
+	 */
+	pp->rx_fis = mem;
+	pp->rx_fis_dma = mem_dma;
+
+	mem += AHCI_RX_FIS_SZ;
+	mem_dma += AHCI_RX_FIS_SZ;
+
+	/*
+	 * Third item: data area for storing a single command
+	 * and its scatter-gather table
+	 */
+	pp->cmd_tbl = mem;
+	pp->cmd_tbl_dma = mem_dma;
+
+	ap->private_data = pp;
+
+	/* initialize port */
+	ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma);
+
+	return 0;
+}
+
+static void ahci_port_stop(struct ata_port *ap)
+{
+	struct device *dev = ap->host_set->dev;
+	struct ahci_host_priv *hpriv = ap->host_set->private_data;
+	struct ahci_port_priv *pp = ap->private_data;
+	void __iomem *mmio = ap->host_set->mmio_base;
+	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	const char *emsg = NULL;
+	int rc;
+
+	/* de-initialize port */
+	rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg);
+	if (rc)
+		ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
+
+	ap->private_data = NULL;
+	dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ,
+			  pp->cmd_slot, pp->cmd_slot_dma);
+	ata_pad_free(ap, dev);
+	kfree(pp);
 }
 
 static void ahci_setup_port(struct ata_ioports *port, unsigned long base,
@@ -1089,47 +1388,12 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
 	struct ahci_host_priv *hpriv = probe_ent->private_data;
 	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
 	void __iomem *mmio = probe_ent->mmio_base;
-	u32 tmp, cap_save;
-	unsigned int i, j, using_dac;
+	unsigned int i, using_dac;
 	int rc;
-	void __iomem *port_mmio;
 
-	cap_save = readl(mmio + HOST_CAP);
-	cap_save &= ( (1<<28) | (1<<17) );
-	cap_save |= (1 << 27);
-
-	/* global controller reset */
-	tmp = readl(mmio + HOST_CTL);
-	if ((tmp & HOST_RESET) == 0) {
-		writel(tmp | HOST_RESET, mmio + HOST_CTL);
-		readl(mmio + HOST_CTL); /* flush */
-	}
-
-	/* reset must complete within 1 second, or
-	 * the hardware should be considered fried.
-	 */
-	ssleep(1);
-
-	tmp = readl(mmio + HOST_CTL);
-	if (tmp & HOST_RESET) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "controller reset failed (0x%x)\n", tmp);
-		return -EIO;
-	}
-
-	writel(HOST_AHCI_EN, mmio + HOST_CTL);
-	(void) readl(mmio + HOST_CTL);	/* flush */
-	writel(cap_save, mmio + HOST_CAP);
-	writel(0xf, mmio + HOST_PORTS_IMPL);
-	(void) readl(mmio + HOST_PORTS_IMPL);	/* flush */
-
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
-		u16 tmp16;
-
-		pci_read_config_word(pdev, 0x92, &tmp16);
-		tmp16 |= 0xf;
-		pci_write_config_word(pdev, 0x92, tmp16);
-	}
+	rc = ahci_reset_controller(mmio, pdev);
+	if (rc)
+		return rc;
 
 	hpriv->cap = readl(mmio + HOST_CAP);
 	hpriv->port_map = readl(mmio + HOST_PORTS_IMPL);
@@ -1165,63 +1429,10 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
 		}
 	}
 
-	for (i = 0; i < probe_ent->n_ports; i++) {
-#if 0 /* BIOSen initialize this incorrectly */
-		if (!(hpriv->port_map & (1 << i)))
-			continue;
-#endif
-
-		port_mmio = ahci_port_base(mmio, i);
-		VPRINTK("mmio %p  port_mmio %p\n", mmio, port_mmio);
-
-		ahci_setup_port(&probe_ent->port[i],
-				(unsigned long) mmio, i);
-
-		/* make sure port is not active */
-		tmp = readl(port_mmio + PORT_CMD);
-		VPRINTK("PORT_CMD 0x%x\n", tmp);
-		if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
-			   PORT_CMD_FIS_RX | PORT_CMD_START)) {
-			tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
-				 PORT_CMD_FIS_RX | PORT_CMD_START);
-			writel(tmp, port_mmio + PORT_CMD);
-			readl(port_mmio + PORT_CMD); /* flush */
-
-			/* spec says 500 msecs for each bit, so
-			 * this is slightly incorrect.
-			 */
-			msleep(500);
-		}
-
-		writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD);
-
-		j = 0;
-		while (j < 100) {
-			msleep(10);
-			tmp = readl(port_mmio + PORT_SCR_STAT);
-			if ((tmp & 0xf) == 0x3)
-				break;
-			j++;
-		}
-
-		tmp = readl(port_mmio + PORT_SCR_ERR);
-		VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
-		writel(tmp, port_mmio + PORT_SCR_ERR);
+	for (i = 0; i < probe_ent->n_ports; i++)
+		ahci_setup_port(&probe_ent->port[i], (unsigned long) mmio, i);
 
-		/* ack any pending irq events for this port */
-		tmp = readl(port_mmio + PORT_IRQ_STAT);
-		VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
-		if (tmp)
-			writel(tmp, port_mmio + PORT_IRQ_STAT);
-
-		writel(1 << i, mmio + HOST_IRQ_STAT);
-	}
-
-	tmp = readl(mmio + HOST_CTL);
-	VPRINTK("HOST_CTL 0x%x\n", tmp);
-	writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
-	tmp = readl(mmio + HOST_CTL);
-	VPRINTK("HOST_CTL 0x%x\n", tmp);
+	ahci_init_controller(mmio, pdev, probe_ent->n_ports, hpriv->cap);
 
 	pci_set_master(pdev);
 
diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c
index 9ce221f..3268cf5 100644
--- a/drivers/scsi/libata-bmdma.c
+++ b/drivers/scsi/libata-bmdma.c
@@ -797,32 +797,6 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
 }
 
 #ifdef CONFIG_PCI
-static struct ata_probe_ent *
-ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
-{
-	struct ata_probe_ent *probe_ent;
-
-	probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
-	if (!probe_ent) {
-		printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
-		       kobject_name(&(dev->kobj)));
-		return NULL;
-	}
-
-	INIT_LIST_HEAD(&probe_ent->node);
-	probe_ent->dev = dev;
-
-	probe_ent->sht = port->sht;
-	probe_ent->host_flags = port->host_flags;
-	probe_ent->pio_mask = port->pio_mask;
-	probe_ent->mwdma_mask = port->mwdma_mask;
-	probe_ent->udma_mask = port->udma_mask;
-	probe_ent->port_ops = port->port_ops;
-
-	return probe_ent;
-}
-
-
 /**
  *	ata_pci_init_native_mode - Initialize native-mode driver
  *	@pdev:  pci device to be initialized
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 16fc2dd..83d93fc 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1528,7 +1528,7 @@ err_out_nosup:
  *	Zero on success, negative errno otherwise.
  */
 
-static int ata_bus_probe(struct ata_port *ap)
+int ata_bus_probe(struct ata_port *ap)
 {
 	unsigned int classes[ATA_MAX_DEVICES];
 	int tries[ATA_MAX_DEVICES];
@@ -5218,35 +5218,25 @@ void ata_dev_init(struct ata_device *dev)
 }
 
 /**
- *	ata_host_init - Initialize an ata_port structure
+ *	ata_port_init - Initialize an ata_port structure
  *	@ap: Structure to initialize
- *	@host: associated SCSI mid-layer structure
  *	@host_set: Collection of hosts to which @ap belongs
  *	@ent: Probe information provided by low-level driver
  *	@port_no: Port number associated with this ata_port
  *
- *	Initialize a new ata_port structure, and its associated
- *	scsi_host.
+ *	Initialize a new ata_port structure.
  *
  *	LOCKING:
  *	Inherited from caller.
  */
-static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
-			  struct ata_host_set *host_set,
-			  const struct ata_probe_ent *ent, unsigned int port_no)
+void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set,
+		   const struct ata_probe_ent *ent, unsigned int port_no)
 {
 	unsigned int i;
 
-	host->max_id = 16;
-	host->max_lun = 1;
-	host->max_channel = 1;
-	host->unique_id = ata_unique_id++;
-	host->max_cmd_len = 12;
-
 	ap->lock = &host_set->lock;
 	ap->flags = ATA_FLAG_DISABLED;
-	ap->id = host->unique_id;
-	ap->host = host;
+	ap->id = ata_unique_id++;
 	ap->ctl = ATA_DEVCTL_OBS;
 	ap->host_set = host_set;
 	ap->dev = ent->dev;
@@ -5298,6 +5288,35 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
 }
 
 /**
+ *	ata_host_init - Initialize an ata_port structure
+ *	@ap: Structure to initialize
+ *	@host: associated SCSI mid-layer structure
+ *	@host_set: Collection of hosts to which @ap belongs
+ *	@ent: Probe information provided by low-level driver
+ *	@port_no: Port number associated with this ata_port
+ *
+ *	Initialize a new ata_port structure, and its associated
+ *	scsi_host.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
+static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
+			  struct ata_host_set *host_set,
+			  const struct ata_probe_ent *ent, unsigned int port_no)
+{
+	ata_port_init(ap, host_set, ent, port_no);
+	ap->host = host;
+
+	host->unique_id = ap->id;
+	host->max_id = 16;
+	host->max_lun = 1;
+	host->max_channel = 1;
+	host->max_cmd_len = 12;
+}
+
+/**
  *	ata_host_add - Attach low-level ATA driver to system
  *	@ent: Information provided by low-level driver
  *	@host_set: Collections of ports to which we add
@@ -5351,6 +5370,28 @@ err_out:
 }
 
 /**
+ *	ata_sas_host_init - Initialize a host_set struct
+ *	@host_set:	host_set to initialize
+ *	@dev:		device host_set is attached to
+ *	@flags:	host_set flags
+ *	@ops:		port_ops
+ *
+ *	LOCKING:
+ *	PCI/etc. bus probe sem.
+ *
+ */
+
+void ata_host_set_init(struct ata_host_set *host_set,
+		       struct device *dev, unsigned long flags,
+		       const struct ata_port_operations *ops)
+{
+	spin_lock_init(&host_set->lock);
+	host_set->dev = dev;
+	host_set->flags = flags;
+	host_set->ops = ops;
+}
+
+/**
  *	ata_device_add - Register hardware device with ATA and SCSI layers
  *	@ent: Probe information describing hardware device to be registered
  *
@@ -5381,15 +5422,12 @@ int ata_device_add(const struct ata_probe_ent *ent)
 			   (ent->n_ports * sizeof(void *)), GFP_KERNEL);
 	if (!host_set)
 		return 0;
-	spin_lock_init(&host_set->lock);
 
-	host_set->dev = dev;
+	ata_host_set_init(host_set, dev, ent->host_set_flags, ent->port_ops);
 	host_set->n_ports = ent->n_ports;
 	host_set->irq = ent->irq;
 	host_set->mmio_base = ent->mmio_base;
 	host_set->private_data = ent->private_data;
-	host_set->ops = ent->port_ops;
-	host_set->flags = ent->host_set_flags;
 
 	/* register each port bound to this device */
 	for (i = 0; i < ent->n_ports; i++) {
@@ -5650,6 +5688,31 @@ int ata_scsi_release(struct Scsi_Host *host)
 	return 1;
 }
 
+struct ata_probe_ent *
+ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
+{
+	struct ata_probe_ent *probe_ent;
+
+	probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
+	if (!probe_ent) {
+		printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
+		       kobject_name(&(dev->kobj)));
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&probe_ent->node);
+	probe_ent->dev = dev;
+
+	probe_ent->sht = port->sht;
+	probe_ent->host_flags = port->host_flags;
+	probe_ent->pio_mask = port->pio_mask;
+	probe_ent->mwdma_mask = port->mwdma_mask;
+	probe_ent->udma_mask = port->udma_mask;
+	probe_ent->port_ops = port->port_ops;
+
+	return probe_ent;
+}
+
 /**
  *	ata_std_ports - initialize ioaddr with standard port offsets.
  *	@ioaddr: IO address structure to be initialized
@@ -5749,11 +5812,11 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
 	return (tmp == bits->val) ? 1 : 0;
 }
 
-void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state)
+void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
 	pci_save_state(pdev);
 
-	if (state.event == PM_EVENT_SUSPEND) {
+	if (mesg.event == PM_EVENT_SUSPEND) {
 		pci_disable_device(pdev);
 		pci_set_power_state(pdev, PCI_D3hot);
 	}
@@ -5767,24 +5830,24 @@ void ata_pci_device_do_resume(struct pci_dev *pdev)
 	pci_set_master(pdev);
 }
 
-int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
+int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
 	struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
 	int rc = 0;
 
-	rc = ata_host_set_suspend(host_set, state);
+	rc = ata_host_set_suspend(host_set, mesg);
 	if (rc)
 		return rc;
 
 	if (host_set->next) {
-		rc = ata_host_set_suspend(host_set->next, state);
+		rc = ata_host_set_suspend(host_set->next, mesg);
 		if (rc) {
 			ata_host_set_resume(host_set);
 			return rc;
 		}
 	}
 
-	ata_pci_device_do_suspend(pdev, state);
+	ata_pci_device_do_suspend(pdev, mesg);
 
 	return 0;
 }
@@ -5908,6 +5971,7 @@ EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
 EXPORT_SYMBOL_GPL(sata_deb_timing_long);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
 EXPORT_SYMBOL_GPL(ata_std_ports);
+EXPORT_SYMBOL_GPL(ata_host_set_init);
 EXPORT_SYMBOL_GPL(ata_device_add);
 EXPORT_SYMBOL_GPL(ata_port_detach);
 EXPORT_SYMBOL_GPL(ata_host_set_remove);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index e92c31d..d168e3413 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -400,7 +400,7 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf)
 /**
  *	ata_scsi_device_suspend - suspend ATA device associated with sdev
  *	@sdev: the SCSI device to suspend
- *	@state: target power management state
+ *	@mesg: target power management message
  *
  *	Request suspend EH action on the ATA device associated with
  *	@sdev and wait for the operation to complete.
@@ -411,7 +411,7 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf)
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
+int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
@@ -438,7 +438,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
 
 	/* request suspend */
 	action = ATA_EH_SUSPEND;
-	if (state.event != PM_EVENT_SUSPEND)
+	if (mesg.event != PM_EVENT_SUSPEND)
 		action |= ATA_EH_PM_FREEZE;
 	ap->eh_info.dev_action[dev->devno] |= action;
 	ap->eh_info.flags |= ATA_EHI_QUIET;
@@ -463,7 +463,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
 	spin_unlock_irqrestore(ap->lock, flags);
  out:
 	if (rc == 0)
-		sdev->sdev_gendev.power.power_state = state;
+		sdev->sdev_gendev.power.power_state = mesg;
 	return rc;
 }
 
@@ -3171,3 +3171,152 @@ void ata_scsi_dev_rescan(void *data)
 			scsi_rescan_device(&(dev->sdev->sdev_gendev));
 	}
 }
+
+/**
+ *	ata_sas_port_alloc - Allocate port for a SAS attached SATA device
+ *	@pdev: PCI device that the scsi device is attached to
+ *	@port_info: Information from low-level host driver
+ *	@host: SCSI host that the scsi device is attached to
+ *
+ *	LOCKING:
+ *	PCI/etc. bus probe sem.
+ *
+ *	RETURNS:
+ *	ata_port pointer on success / NULL on failure.
+ */
+
+struct ata_port *ata_sas_port_alloc(struct ata_host_set *host_set,
+				    struct ata_port_info *port_info,
+				    struct Scsi_Host *host)
+{
+	struct ata_port *ap = kzalloc(sizeof(*ap), GFP_KERNEL);
+	struct ata_probe_ent *ent;
+
+	if (!ap)
+		return NULL;
+
+	ent = ata_probe_ent_alloc(host_set->dev, port_info);
+	if (!ent) {
+		kfree(ap);
+		return NULL;
+	}
+
+	ata_port_init(ap, host_set, ent, 0);
+	ap->lock = host->host_lock;
+	kfree(ent);
+	return ap;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
+
+/**
+ *	ata_sas_port_start - Set port up for dma.
+ *	@ap: Port to initialize
+ *
+ *	Called just after data structures for each port are
+ *	initialized.  Allocates DMA pad.
+ *
+ *	May be used as the port_start() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+int ata_sas_port_start(struct ata_port *ap)
+{
+	return ata_pad_alloc(ap, ap->dev);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_start);
+
+/**
+ *	ata_port_stop - Undo ata_sas_port_start()
+ *	@ap: Port to shut down
+ *
+ *	Frees the DMA pad.
+ *
+ *	May be used as the port_stop() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
+void ata_sas_port_stop(struct ata_port *ap)
+{
+	ata_pad_free(ap, ap->dev);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_stop);
+
+/**
+ *	ata_sas_port_init - Initialize a SATA device
+ *	@ap: SATA port to initialize
+ *
+ *	LOCKING:
+ *	PCI/etc. bus probe sem.
+ *
+ *	RETURNS:
+ *	Zero on success, non-zero on error.
+ */
+
+int ata_sas_port_init(struct ata_port *ap)
+{
+	int rc = ap->ops->port_start(ap);
+
+	if (!rc)
+		rc = ata_bus_probe(ap);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_init);
+
+/**
+ *	ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc
+ *	@ap: SATA port to destroy
+ *
+ */
+
+void ata_sas_port_destroy(struct ata_port *ap)
+{
+	ap->ops->port_stop(ap);
+	kfree(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_destroy);
+
+/**
+ *	ata_sas_slave_configure - Default slave_config routine for libata devices
+ *	@sdev: SCSI device to configure
+ *	@ap: ATA port to which SCSI device is attached
+ *
+ *	RETURNS:
+ *	Zero.
+ */
+
+int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
+{
+	ata_scsi_sdev_config(sdev);
+	ata_scsi_dev_config(sdev, ap->device);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
+
+/**
+ *	ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
+ *	@cmd: SCSI command to be sent
+ *	@done: Completion function, called when command is complete
+ *	@ap:	ATA port to which the command is being sent
+ *
+ *	RETURNS:
+ *	Zero.
+ */
+
+int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
+		     struct ata_port *ap)
+{
+	ata_scsi_dump_cdb(ap, cmd);
+
+	if (likely(ata_scsi_dev_enabled(ap->device)))
+		__ata_scsi_queuecmd(cmd, done, ap->device);
+	else {
+		cmd->result = (DID_BAD_TARGET << 16);
+		done(cmd);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_queuecmd);
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index c325679..d4a4f82 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -69,6 +69,10 @@ extern int ata_flush_cache(struct ata_device *dev);
 extern void ata_dev_init(struct ata_device *dev);
 extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
+extern void ata_port_init(struct ata_port *ap, struct ata_host_set *host_set,
+			  const struct ata_probe_ent *ent, unsigned int port_no);
+extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev,
+						 const struct ata_port_info *port);
 
 
 /* libata-scsi.c */
@@ -107,6 +111,7 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
                                            u8 *rbuf, unsigned int buflen));
 extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
 extern void ata_scsi_dev_rescan(void *data);
+extern int ata_bus_probe(struct ata_port *ap);
 
 /* libata-eh.c */
 extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);