diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ata/Kconfig | 493 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 63 | ||||
| -rw-r--r-- | drivers/ata/ahci.c (renamed from drivers/scsi/ahci.c) | 721 | ||||
| -rw-r--r-- | drivers/ata/ata_generic.c | 252 | ||||
| -rw-r--r-- | drivers/ata/ata_piix.c (renamed from drivers/scsi/ata_piix.c) | 510 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c (renamed from drivers/scsi/libata-core.c) | 584 | ||||
| -rw-r--r-- | drivers/ata/libata-eh.c (renamed from drivers/scsi/libata-eh.c) | 18 | ||||
| -rw-r--r-- | drivers/ata/libata-scsi.c (renamed from drivers/scsi/libata-scsi.c) | 223 | ||||
| -rw-r--r-- | drivers/ata/libata-sff.c (renamed from drivers/scsi/libata-bmdma.c) | 188 | ||||
| -rw-r--r-- | drivers/ata/libata.h (renamed from drivers/scsi/libata.h) | 5 | ||||
| -rw-r--r-- | drivers/ata/pata_ali.c | 679 | ||||
| -rw-r--r-- | drivers/ata/pata_amd.c | 718 | ||||
| -rw-r--r-- | drivers/ata/pata_artop.c | 518 | ||||
| -rw-r--r-- | drivers/ata/pata_atiixp.c | 306 | ||||
| -rw-r--r-- | drivers/ata/pata_cmd64x.c | 505 | ||||
| -rw-r--r-- | drivers/ata/pata_cs5520.c | 336 | ||||
| -rw-r--r-- | drivers/ata/pata_cs5530.c | 387 | ||||
| -rw-r--r-- | drivers/ata/pata_cs5535.c | 291 | ||||
| -rw-r--r-- | drivers/ata/pata_cypress.c | 227 | ||||
| -rw-r--r-- | drivers/ata/pata_efar.c | 342 | ||||
| -rw-r--r-- | drivers/ata/pata_hpt366.c | 478 | ||||
| -rw-r--r-- | drivers/ata/pata_hpt37x.c | 1257 | ||||
| -rw-r--r-- | drivers/ata/pata_hpt3x2n.c | 597 | ||||
| -rw-r--r-- | drivers/ata/pata_hpt3x3.c | 226 | ||||
| -rw-r--r-- | drivers/ata/pata_isapnp.c | 156 | ||||
| -rw-r--r-- | drivers/ata/pata_it8172.c | 288 | ||||
| -rw-r--r-- | drivers/ata/pata_it821x.c | 847 | ||||
| -rw-r--r-- | drivers/ata/pata_jmicron.c | 266 | ||||
| -rw-r--r-- | drivers/ata/pata_legacy.c | 949 | ||||
| -rw-r--r-- | drivers/ata/pata_mpiix.c | 313 | ||||
| -rw-r--r-- | drivers/ata/pata_netcell.c | 175 | ||||
| -rw-r--r-- | drivers/ata/pata_ns87410.c | 236 | ||||
| -rw-r--r-- | drivers/ata/pata_oldpiix.c | 339 | ||||
| -rw-r--r-- | drivers/ata/pata_opti.c | 292 | ||||
| -rw-r--r-- | drivers/ata/pata_optidma.c | 547 | ||||
| -rw-r--r-- | drivers/ata/pata_pcmcia.c | 393 | ||||
| -rw-r--r-- | drivers/ata/pata_pdc2027x.c | 869 | ||||
| -rw-r--r-- | drivers/ata/pata_pdc202xx_old.c | 423 | ||||
| -rw-r--r-- | drivers/ata/pata_qdi.c | 403 | ||||
| -rw-r--r-- | drivers/ata/pata_radisys.c | 335 | ||||
| -rw-r--r-- | drivers/ata/pata_rz1000.c | 205 | ||||
| -rw-r--r-- | drivers/ata/pata_sc1200.c | 287 | ||||
| -rw-r--r-- | drivers/ata/pata_serverworks.c | 587 | ||||
| -rw-r--r-- | drivers/ata/pata_sil680.c | 381 | ||||
| -rw-r--r-- | drivers/ata/pata_sis.c | 1034 | ||||
| -rw-r--r-- | drivers/ata/pata_sl82c105.c | 388 | ||||
| -rw-r--r-- | drivers/ata/pata_triflex.c | 285 | ||||
| -rw-r--r-- | drivers/ata/pata_via.c | 568 | ||||
| -rw-r--r-- | drivers/ata/pdc_adma.c (renamed from drivers/scsi/pdc_adma.c) | 50 | ||||
| -rw-r--r-- | drivers/ata/sata_mv.c (renamed from drivers/scsi/sata_mv.c) | 100 | ||||
| -rw-r--r-- | drivers/ata/sata_nv.c (renamed from drivers/scsi/sata_nv.c) | 60 | ||||
| -rw-r--r-- | drivers/ata/sata_promise.c (renamed from drivers/scsi/sata_promise.c) | 56 | ||||
| -rw-r--r-- | drivers/ata/sata_promise.h (renamed from drivers/scsi/sata_promise.h) | 0 | ||||
| -rw-r--r-- | drivers/ata/sata_qstor.c (renamed from drivers/scsi/sata_qstor.c) | 46 | ||||
| -rw-r--r-- | drivers/ata/sata_sil.c (renamed from drivers/scsi/sata_sil.c) | 59 | ||||
| -rw-r--r-- | drivers/ata/sata_sil24.c (renamed from drivers/scsi/sata_sil24.c) | 67 | ||||
| -rw-r--r-- | drivers/ata/sata_sis.c (renamed from drivers/scsi/sata_sis.c) | 20 | ||||
| -rw-r--r-- | drivers/ata/sata_svw.c (renamed from drivers/scsi/sata_svw.c) | 12 | ||||
| -rw-r--r-- | drivers/ata/sata_sx4.c (renamed from drivers/scsi/sata_sx4.c) | 66 | ||||
| -rw-r--r-- | drivers/ata/sata_uli.c (renamed from drivers/scsi/sata_uli.c) | 10 | ||||
| -rw-r--r-- | drivers/ata/sata_via.c (renamed from drivers/scsi/sata_via.c) | 6 | ||||
| -rw-r--r-- | drivers/ata/sata_vsc.c (renamed from drivers/scsi/sata_vsc.c) | 18 | ||||
| -rw-r--r-- | drivers/pci/quirks.c | 6 | ||||
| -rw-r--r-- | drivers/scsi/Kconfig | 138 | ||||
| -rw-r--r-- | drivers/scsi/Makefile | 16 |
67 files changed, 19994 insertions, 1229 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index 8b11ceb..263e86d 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -18,6 +18,8 @@ source "drivers/ide/Kconfig" source "drivers/scsi/Kconfig" +source "drivers/ata/Kconfig" + source "drivers/cdrom/Kconfig" source "drivers/md/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index fc2d744..4ac14da 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_PPC_PMAC) += macintosh/ obj-$(CONFIG_IDE) += ide/ obj-$(CONFIG_FC4) += fc4/ obj-$(CONFIG_SCSI) += scsi/ +obj-$(CONFIG_ATA) += ata/ obj-$(CONFIG_FUSION) += message/ obj-$(CONFIG_IEEE1394) += ieee1394/ obj-y += cdrom/ diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig new file mode 100644 index 0000000..cbf0deb --- /dev/null +++ b/drivers/ata/Kconfig @@ -0,0 +1,493 @@ +# +# SATA/PATA driver configuration +# + +menu "Serial ATA (prod) and Parallel ATA (experimental) drivers" + +config ATA + tristate "ATA device support" + select SCSI + ---help--- + If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or + any other ATA device under Linux, say Y and make sure that you know + the name of your ATA host adapter (the card inside your computer + that "speaks" the ATA protocol, also called ATA controller), + because you will be asked for it. + +if ATA + +config SATA_AHCI + tristate "AHCI SATA support" + depends on PCI + help + This option enables support for AHCI Serial ATA. + + If unsure, say N. + +config SATA_SVW + tristate "ServerWorks Frodo / Apple K2 SATA support" + depends on PCI + help + This option enables support for Broadcom/Serverworks/Apple K2 + SATA support. + + If unsure, say N. + +config ATA_PIIX + tristate "Intel PIIX/ICH SATA support" + depends on PCI + help + This option enables support for ICH5/6/7/8 Serial ATA. + If PATA support was enabled previously, this enables + support for select Intel PIIX/ICH PATA host controllers. + + If unsure, say N. + +config SATA_MV + tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Marvell Serial ATA family. + Currently supports 88SX[56]0[48][01] chips. + + If unsure, say N. + +config SATA_NV + tristate "NVIDIA SATA support" + depends on PCI + help + This option enables support for NVIDIA Serial ATA. + + If unsure, say N. + +config PDC_ADMA + tristate "Pacific Digital ADMA support" + depends on PCI + help + This option enables support for Pacific Digital ADMA controllers + + If unsure, say N. + +config SATA_QSTOR + tristate "Pacific Digital SATA QStor support" + depends on PCI + help + This option enables support for Pacific Digital Serial ATA QStor. + + If unsure, say N. + +config SATA_PROMISE + tristate "Promise SATA TX2/TX4 support" + depends on PCI + help + This option enables support for Promise Serial ATA TX2/TX4. + + If unsure, say N. + +config SATA_SX4 + tristate "Promise SATA SX4 support" + depends on PCI && EXPERIMENTAL + help + This option enables support for Promise Serial ATA SX4. + + If unsure, say N. + +config SATA_SIL + tristate "Silicon Image SATA support" + depends on PCI + help + This option enables support for Silicon Image Serial ATA. + + If unsure, say N. + +config SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on PCI + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + +config SATA_SIS + tristate "SiS 964/180 SATA support" + depends on PCI + help + This option enables support for SiS Serial ATA 964/180. + + If unsure, say N. + +config SATA_ULI + tristate "ULi Electronics SATA support" + depends on PCI + help + This option enables support for ULi Electronics SATA. + + If unsure, say N. + +config SATA_VIA + tristate "VIA SATA support" + depends on PCI + help + This option enables support for VIA Serial ATA. + + If unsure, say N. + +config SATA_VITESSE + tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" + depends on PCI + help + This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. + + If unsure, say N. + +config SATA_INTEL_COMBINED + bool + depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX) + default y + +config PATA_ALI + tristate "ALi PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ALi ATA interfaces + found on the many ALi chipsets. + + If unsure, say N. + +config PATA_AMD + tristate "AMD/NVidia PATA support (Experimental)" + depends on PCI + help + This option enables support for the AMD and NVidia PATA + interfaces found on the chipsets for Athlon/Athlon64. + + If unsure, say N. + +config PATA_ARTOP + tristate "ARTOP 6210/6260 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for ARTOP PATA controllers. + + If unsure, say N. + +config PATA_ATIIXP + tristate "ATI PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ATI ATA interfaces + found on the many ATI chipsets. + + If unsure, say N. + +config PATA_CMD64X + tristate "CMD64x PATA support (Very Experimental)" + depends on PCI&& EXPERIMENTAL + help + This option enables support for the CMD64x series chips + except for the CMD640. + + If unsure, say N. + +config PATA_CS5520 + tristate "CS5510/5520 PATA support" + depends on PCI + help + This option enables support for the Cyrix 5510/5520 + companion chip used with the MediaGX/Geode processor family. + + If unsure, say N. + +config PATA_CS5530 + tristate "CS5530 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Cyrix/NatSemi/AMD CS5530 + companion chip used with the MediaGX/Geode processor family. + + If unsure, say N. + +config PATA_CS5535 + tristate "CS5535 PATA support (Experimental)" + depends on PCI && X86 && !X86_64 && EXPERIMENTAL + help + This option enables support for the NatSemi/AMD CS5535 + companion chip used with the Geode processor family. + + If unsure, say N. + +config PATA_CYPRESS + tristate "Cypress CY82C693 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Cypress/Contaq CY82C693 + chipset found in some Alpha systems + + If unsure, say N. + +config PATA_EFAR + tristate "EFAR SLC90E66 support" + depends on PCI + help + This option enables support for the EFAR SLC90E66 + IDE controller found on some older machines. + + If unsure, say N. + +config ATA_GENERIC + tristate "Generic ATA support" + depends on PCI + help + This option enables support for generic BIOS configured + ATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_HPT366 + tristate "HPT 366/368 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the HPT 366 and 368 + PATA controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT37X + tristate "HPT 370/370A/371/372/374/302 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the majority of the later HPT + PATA controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT3X2N + tristate "HPT 372N/302N PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the N variant HPT PATA + controllers via the new ATA layer + + If unsure, say N. + +config PATA_HPT3X3 + tristate "HPT 343/363 PATA support (Experimental)" + depends on PCI + help + This option enables support for the HPT 343/363 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_ISAPNP + tristate "ISA Plug and Play PATA support (Very Experimental)" + depends on EXPERIMENTAL && ISAPNP + help + This option enables support for ISA plug & play ATA + controllers such as those found on old soundcards. + + If unsure, say N. + +config PATA_IT8172 + tristate "IT8172 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ITE 8172 PATA controller + via the new ATA layer. + + If unsure, say N. + +config PATA_IT821X + tristate "IT821x PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the ITE 8211 and 8212 + PATA controllers via the new ATA layer, including RAID + mode. + + If unsure, say N. + +config PATA_JMICRON + tristate "JMicron PATA support" + depends on PCI + help + Enable support for the JMicron IDE controller, via the new + ATA layer. + + If unsure, say N. + +config PATA_LEGACY + tristate "Legacy ISA PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for ISA/VLB bus legacy PATA + ports and allows them to be accessed via the new ATA layer. + + If unsure, say N. + +config PATA_TRIFLEX + tristate "Compaq Triflex PATA support" + depends on PCI + help + Enable support for the Compaq 'Triflex' IDE controller as found + on many Compaq Pentium-Pro systems, via the new ATA layer. + + If unsure, say N. + +config PATA_MPIIX + tristate "Intel PATA MPIIX support" + depends on PCI + help + This option enables support for MPIIX PATA support. + + If unsure, say N. + +config PATA_OLDPIIX + tristate "Intel PATA old PIIX support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for old(?) PIIX PATA support. + + If unsure, say N. + +config PATA_NETCELL + tristate "NETCELL Revolution RAID support" + depends on PCI + help + This option enables support for the Netcell Revolution RAID + PATA controller. + + If unsure, say N. + +config PATA_NS87410 + tristate "Nat Semi NS87410 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the National Semiconductor + NS87410 PCI-IDE controller. + + If unsure, say N. + +config PATA_OPTI + tristate "OPTI621/6215 PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables full PIO support for the early Opti ATA + controllers found on some old motherboards. + + If unsure, say N. + +config PATA_OPTIDMA + tristate "OPTI FireStar PATA support (Veyr Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables DMA/PIO support for the later OPTi + controllers found on some old motherboards and in some + latops + + If unsure, say N. + +config PATA_PCMCIA + tristate "PCMCIA PATA support" + depends on PCMCIA + help + This option enables support for PCMCIA ATA interfaces, including + compact flash card adapters via the new ATA layer. + + If unsure, say N. + +config PATA_PDC_OLD + tristate "Older Promise PATA controller support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Promise 20246, 20262, 20263, + 20265 and 20267 adapters. + + If unsure, say N. + +config PATA_QDI + tristate "QDI VLB PATA support" + help + Support for QDI 6500 and 6580 PATA controllers on VESA local bus. + +config PATA_RADISYS + tristate "RADISYS 82600 PATA support (Very experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the RADISYS 82600 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_RZ1000 + tristate "PC Tech RZ1000 PATA support" + depends on PCI + help + This option enables basic support for the PC Tech RZ1000/1 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_SC1200 + tristate "SC1200 PATA support (Raving Lunatic)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the NatSemi/AMD SC1200 SoC + companion chip used with the Geode processor family. + + If unsure, say N. + +config PATA_SERVERWORKS + tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Serverworks OSB4/CSB5/CSB6 and + HT1000 PATA controllers, via the new ATA layer. + + If unsure, say N. + +config PATA_PDC2027X + tristate "Promise PATA 2027x support" + depends on PCI + help + This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. + + If unsure, say N. + +config PATA_SIL680 + tristate "CMD / Silicon Image 680 PATA support" + depends on PCI + help + This option enables support for CMD / Silicon Image 680 PATA. + + If unsure, say N. + +config PATA_SIS + tristate "SiS PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for SiS PATA controllers + + If unsure, say N. + +config PATA_VIA + tristate "VIA PATA support" + depends on PCI + help + This option enables support for the VIA PATA interfaces + found on the many VIA chipsets. + + If unsure, say N. + +config PATA_WINBOND + tristate "Winbond SL82C105 PATA support" + depends on PCI + help + This option enables support for SL82C105 PATA devices found in the + Netwinder and some other systems + + If unsure, say N. + +endif +endmenu + diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile new file mode 100644 index 0000000..e42d14d --- /dev/null +++ b/drivers/ata/Makefile @@ -0,0 +1,63 @@ + +obj-$(CONFIG_ATA) += libata.o + +obj-$(CONFIG_SATA_AHCI) += ahci.o +obj-$(CONFIG_SATA_SVW) += sata_svw.o +obj-$(CONFIG_ATA_PIIX) += ata_piix.o +obj-$(CONFIG_SATA_PROMISE) += sata_promise.o +obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o +obj-$(CONFIG_SATA_SIL) += sata_sil.o +obj-$(CONFIG_SATA_SIL24) += sata_sil24.o +obj-$(CONFIG_SATA_VIA) += sata_via.o +obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o +obj-$(CONFIG_SATA_SIS) += sata_sis.o +obj-$(CONFIG_SATA_SX4) += sata_sx4.o +obj-$(CONFIG_SATA_NV) += sata_nv.o +obj-$(CONFIG_SATA_ULI) += sata_uli.o +obj-$(CONFIG_SATA_MV) += sata_mv.o +obj-$(CONFIG_PDC_ADMA) += pdc_adma.o + +obj-$(CONFIG_PATA_ALI) += pata_ali.o +obj-$(CONFIG_PATA_AMD) += pata_amd.o +obj-$(CONFIG_PATA_ARTOP) += pata_artop.o +obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o +obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o +obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o +obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o +obj-$(CONFIG_PATA_CS5535) += pata_cs5535.o +obj-$(CONFIG_PATA_CYPRESS) += pata_cypress.o +obj-$(CONFIG_PATA_EFAR) += pata_efar.o +obj-$(CONFIG_PATA_HPT366) += pata_hpt366.o +obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o +obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o +obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o +obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o +obj-$(CONFIG_PATA_IT8172) += pata_it8172.o +obj-$(CONFIG_PATA_IT821X) += pata_it821x.o +obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o +obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o +obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o +obj-$(CONFIG_PATA_OPTI) += pata_opti.o +obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o +obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o +obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o +obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o +obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o +obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o +obj-$(CONFIG_PATA_QDI) += pata_qdi.o +obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o +obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o +obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o +obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o +obj-$(CONFIG_PATA_SIL680) += pata_sil680.o +obj-$(CONFIG_PATA_VIA) += pata_via.o +obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o +obj-$(CONFIG_PATA_SIS) += pata_sis.o +obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o +# Should be last but one libata driver +obj-$(CONFIG_ATA_GENERIC) += ata_generic.o +# Should be last libata driver +obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o + +libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o + diff --git a/drivers/scsi/ahci.c b/drivers/ata/ahci.c index 904c25f..1aabc81 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/ata/ahci.c @@ -92,7 +92,9 @@ enum { HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ /* HOST_CAP bits */ + HOST_CAP_SSC = (1 << 14), /* Slumber capable */ HOST_CAP_CLO = (1 << 24), /* Command List Override support */ + HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ @@ -155,6 +157,7 @@ enum { PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ + PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ @@ -212,6 +215,10 @@ static void ahci_freeze(struct ata_port *ap); static void ahci_thaw(struct ata_port *ap); static void ahci_error_handler(struct ata_port *ap); static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); +static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); +static int ahci_port_resume(struct ata_port *ap); +static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); +static int ahci_pci_device_resume(struct pci_dev *pdev); static void ahci_remove_one (struct pci_dev *pdev); static struct scsi_host_template ahci_sht = { @@ -231,6 +238,8 @@ static struct scsi_host_template ahci_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, }; static const struct ata_port_operations ahci_ops = { @@ -257,6 +266,9 @@ static const struct ata_port_operations ahci_ops = { .error_handler = ahci_error_handler, .post_internal_cmd = ahci_post_internal_cmd, + .port_suspend = ahci_port_suspend, + .port_resume = ahci_port_resume, + .port_start = ahci_port_start, .port_stop = ahci_port_stop, }; @@ -265,7 +277,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci */ { .sht = &ahci_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_SKIP_D2H_BSY, .pio_mask = 0x1f, /* pio0-4 */ @@ -275,7 +287,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci_vt8251 */ { .sht = &ahci_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_SKIP_D2H_BSY | AHCI_FLAG_RESET_NEEDS_CLO | AHCI_FLAG_NO_NCQ, @@ -350,6 +362,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, 0x044f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* MCP65 */ + /* SiS */ + { PCI_VENDOR_ID_SI, 0x1184, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* SiS 966 */ + { PCI_VENDOR_ID_SI, 0x1185, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* SiS 966 */ + { PCI_VENDOR_ID_SI, 0x0186, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* SiS 968 */ + { } /* terminate list */ }; @@ -358,6 +378,8 @@ static struct pci_driver ahci_pci_driver = { .name = DRV_NAME, .id_table = ahci_pci_tbl, .probe = ahci_init_one, + .suspend = ahci_pci_device_suspend, + .resume = ahci_pci_device_resume, .remove = ahci_remove_one, }; @@ -372,177 +394,288 @@ static inline void __iomem *ahci_port_base (void __iomem *base, unsigned int por return (void __iomem *) ahci_port_base_ul((unsigned long)base, port); } -static int ahci_port_start(struct ata_port *ap) +static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) { - struct device *dev = ap->host_set->dev; - struct ahci_host_priv *hpriv = ap->host_set->private_data; - struct ahci_port_priv *pp; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - void *mem; - dma_addr_t mem_dma; - int rc; - - pp = kmalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) - return -ENOMEM; - memset(pp, 0, sizeof(*pp)); + unsigned int sc_reg; - rc = ata_pad_alloc(ap, dev); - if (rc) { - kfree(pp); - return rc; + switch (sc_reg_in) { + case SCR_STATUS: sc_reg = 0; break; + case SCR_CONTROL: sc_reg = 1; break; + case SCR_ERROR: sc_reg = 2; break; + case SCR_ACTIVE: sc_reg = 3; break; + default: + return 0xffffffffU; } - mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); - if (!mem) { - ata_pad_free(ap, dev); - kfree(pp); - return -ENOMEM; - } - memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} - /* - * First item in chunk of DMA memory: 32-slot command table, - * 32 bytes each in size - */ - pp->cmd_slot = mem; - pp->cmd_slot_dma = mem_dma; - mem += AHCI_CMD_SLOT_SZ; - mem_dma += AHCI_CMD_SLOT_SZ; +static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, + u32 val) +{ + unsigned int sc_reg; - /* - * Second item: Received-FIS area - */ - pp->rx_fis = mem; - pp->rx_fis_dma = mem_dma; + switch (sc_reg_in) { + case SCR_STATUS: sc_reg = 0; break; + case SCR_CONTROL: sc_reg = 1; break; + case SCR_ERROR: sc_reg = 2; break; + case SCR_ACTIVE: sc_reg = 3; break; + default: + return; + } - mem += AHCI_RX_FIS_SZ; - mem_dma += AHCI_RX_FIS_SZ; + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} - /* - * Third item: data area for storing a single command - * and its scatter-gather table - */ - pp->cmd_tbl = mem; - pp->cmd_tbl_dma = mem_dma; +static void ahci_start_engine(void __iomem *port_mmio) +{ + u32 tmp; - ap->private_data = pp; + /* start DMA */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ +} - if (hpriv->cap & HOST_CAP_64) - writel((pp->cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); - writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); - readl(port_mmio + PORT_LST_ADDR); /* flush */ +static int ahci_stop_engine(void __iomem *port_mmio) +{ + u32 tmp; - if (hpriv->cap & HOST_CAP_64) - writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); - writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); - readl(port_mmio + PORT_FIS_ADDR); /* flush */ + tmp = readl(port_mmio + PORT_CMD); - writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX | - PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP | - PORT_CMD_START, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ + /* check if the HBA is idle */ + if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) + return 0; + + /* setting HBA to idle */ + tmp &= ~PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + + /* wait for engine to stop. This could be as long as 500 msec */ + tmp = ata_wait_register(port_mmio + PORT_CMD, + PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); + if (tmp & PORT_CMD_LIST_ON) + return -EIO; return 0; } +static void ahci_start_fis_rx(void __iomem *port_mmio, u32 cap, + dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma) +{ + u32 tmp; -static void ahci_port_stop(struct ata_port *ap) + /* set FIS registers */ + if (cap & HOST_CAP_64) + writel((cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); + writel(cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); + + if (cap & HOST_CAP_64) + writel((rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); + writel(rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); + + /* enable FIS reception */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_FIS_RX; + writel(tmp, port_mmio + PORT_CMD); + + /* flush */ + readl(port_mmio + PORT_CMD); +} + +static int ahci_stop_fis_rx(void __iomem *port_mmio) { - struct device *dev = ap->host_set->dev; - struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); u32 tmp; + /* disable FIS reception */ tmp = readl(port_mmio + PORT_CMD); - tmp &= ~(PORT_CMD_START | PORT_CMD_FIS_RX); + tmp &= ~PORT_CMD_FIS_RX; writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - /* spec says 500 msecs for each PORT_CMD_{START,FIS_RX} bit, so - * this is slightly incorrect. - */ - msleep(500); + /* wait for completion, spec says 500ms, give it 1000 */ + tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, + PORT_CMD_FIS_ON, 10, 1000); + if (tmp & PORT_CMD_FIS_ON) + return -EBUSY; - ap->private_data = NULL; - dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, - pp->cmd_slot, pp->cmd_slot_dma); - ata_pad_free(ap, dev); - kfree(pp); + return 0; } -static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) +static void ahci_power_up(void __iomem *port_mmio, u32 cap) { - unsigned int sc_reg; + u32 cmd; - switch (sc_reg_in) { - case SCR_STATUS: sc_reg = 0; break; - case SCR_CONTROL: sc_reg = 1; break; - case SCR_ERROR: sc_reg = 2; break; - case SCR_ACTIVE: sc_reg = 3; break; - default: - return 0xffffffffU; + cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; + + /* spin up device */ + if (cap & HOST_CAP_SSS) { + cmd |= PORT_CMD_SPIN_UP; + writel(cmd, port_mmio + PORT_CMD); } - return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); + /* wake up link */ + writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); } +static void ahci_power_down(void __iomem *port_mmio, u32 cap) +{ + u32 cmd, scontrol; -static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, - u32 val) + cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; + + if (cap & HOST_CAP_SSC) { + /* enable transitions to slumber mode */ + scontrol = readl(port_mmio + PORT_SCR_CTL); + if ((scontrol & 0x0f00) > 0x100) { + scontrol &= ~0xf00; + writel(scontrol, port_mmio + PORT_SCR_CTL); + } + + /* put device into slumber mode */ + writel(cmd | PORT_CMD_ICC_SLUMBER, port_mmio + PORT_CMD); + + /* wait for the transition to complete */ + ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_ICC_SLUMBER, + PORT_CMD_ICC_SLUMBER, 1, 50); + } + + /* put device into listen mode */ + if (cap & HOST_CAP_SSS) { + /* first set PxSCTL.DET to 0 */ + scontrol = readl(port_mmio + PORT_SCR_CTL); + scontrol &= ~0xf; + writel(scontrol, port_mmio + PORT_SCR_CTL); + + /* then set PxCMD.SUD to 0 */ + cmd &= ~PORT_CMD_SPIN_UP; + writel(cmd, port_mmio + PORT_CMD); + } +} + +static void ahci_init_port(void __iomem *port_mmio, u32 cap, + dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma) { - unsigned int sc_reg; + /* power up */ + ahci_power_up(port_mmio, cap); - switch (sc_reg_in) { - case SCR_STATUS: sc_reg = 0; break; - case SCR_CONTROL: sc_reg = 1; break; - case SCR_ERROR: sc_reg = 2; break; - case SCR_ACTIVE: sc_reg = 3; break; - default: - return; + /* enable FIS reception */ + ahci_start_fis_rx(port_mmio, cap, cmd_slot_dma, rx_fis_dma); + + /* enable DMA */ + ahci_start_engine(port_mmio); +} + +static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg) +{ + int rc; + + /* disable DMA */ + rc = ahci_stop_engine(port_mmio); + if (rc) { + *emsg = "failed to stop engine"; + return rc; } - writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); + /* disable FIS reception */ + rc = ahci_stop_fis_rx(port_mmio); + if (rc) { + *emsg = "failed stop FIS RX"; + return rc; + } + + /* put device into slumber mode */ + ahci_power_down(port_mmio, cap); + + return 0; } -static int ahci_stop_engine(struct ata_port *ap) +static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev) { - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - int work; - u32 tmp; + u32 cap_save, tmp; - tmp = readl(port_mmio + PORT_CMD); - tmp &= ~PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); + cap_save = readl(mmio + HOST_CAP); + cap_save &= ( (1<<28) | (1<<17) ); + cap_save |= (1 << 27); + + /* global controller reset */ + tmp = readl(mmio + HOST_CTL); + if ((tmp & HOST_RESET) == 0) { + writel(tmp | HOST_RESET, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } - /* wait for engine to stop. TODO: this could be - * as long as 500 msec + /* reset must complete within 1 second, or + * the hardware should be considered fried. */ - work = 1000; - while (work-- > 0) { - tmp = readl(port_mmio + PORT_CMD); - if ((tmp & PORT_CMD_LIST_ON) == 0) - return 0; - udelay(10); + ssleep(1); + + tmp = readl(mmio + HOST_CTL); + if (tmp & HOST_RESET) { + dev_printk(KERN_ERR, &pdev->dev, + "controller reset failed (0x%x)\n", tmp); + return -EIO; } - return -EIO; + writel(HOST_AHCI_EN, mmio + HOST_CTL); + (void) readl(mmio + HOST_CTL); /* flush */ + writel(cap_save, mmio + HOST_CAP); + writel(0xf, mmio + HOST_PORTS_IMPL); + (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ + + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { + u16 tmp16; + + /* configure PCS */ + pci_read_config_word(pdev, 0x92, &tmp16); + tmp16 |= 0xf; + pci_write_config_word(pdev, 0x92, tmp16); + } + + return 0; } -static void ahci_start_engine(struct ata_port *ap) +static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev, + int n_ports, u32 cap) { - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + int i, rc; u32 tmp; - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ + for (i = 0; i < n_ports; i++) { + void __iomem *port_mmio = ahci_port_base(mmio, i); + const char *emsg = NULL; + +#if 0 /* BIOSen initialize this incorrectly */ + if (!(hpriv->port_map & (1 << i))) + continue; +#endif + + /* make sure port is not active */ + rc = ahci_deinit_port(port_mmio, cap, &emsg); + if (rc) + dev_printk(KERN_WARNING, &pdev->dev, + "%s (%d)\n", emsg, rc); + + /* clear SError */ + tmp = readl(port_mmio + PORT_SCR_ERR); + VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* clear port IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + + writel(1 << i, mmio + HOST_IRQ_STAT); + } + + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); + writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); } static unsigned int ahci_dev_classify(struct ata_port *ap) @@ -576,7 +709,7 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, static int ahci_clo(struct ata_port *ap) { void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - struct ahci_host_priv *hpriv = ap->host_set->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; u32 tmp; if (!(hpriv->cap & HOST_CAP_CLO)) @@ -608,7 +741,7 @@ static int ahci_prereset(struct ata_port *ap) static int ahci_softreset(struct ata_port *ap, unsigned int *class) { struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); const u32 cmd_fis_len = 5; /* five dwords */ const char *reason = NULL; @@ -626,7 +759,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) } /* prepare for SRST (AHCI-1.1 10.4.1) */ - rc = ahci_stop_engine(ap); + rc = ahci_stop_engine(port_mmio); if (rc) { reason = "failed to stop engine"; goto fail_restart; @@ -647,7 +780,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) } /* restart engine */ - ahci_start_engine(ap); + ahci_start_engine(port_mmio); ata_tf_init(ap->device, &tf); fis = pp->cmd_tbl; @@ -706,7 +839,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) return 0; fail_restart: - ahci_start_engine(ap); + ahci_start_engine(port_mmio); fail: ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); return rc; @@ -717,11 +850,13 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class) struct ahci_port_priv *pp = ap->private_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; struct ata_taskfile tf; + void __iomem *mmio = ap->host->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); int rc; DPRINTK("ENTER\n"); - ahci_stop_engine(ap); + ahci_stop_engine(port_mmio); /* clear D2H reception area to properly wait for D2H FIS */ ata_tf_init(ap->device, &tf); @@ -730,7 +865,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class) rc = sata_std_hardreset(ap, class); - ahci_start_engine(ap); + ahci_start_engine(port_mmio); if (rc == 0 && ata_port_online(ap)) *class = ahci_dev_classify(ap); @@ -904,7 +1039,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) static void ahci_host_intr(struct ata_port *ap) { - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); struct ata_eh_info *ehi = &ap->eh_info; u32 status, qc_active; @@ -940,7 +1075,7 @@ static void ahci_host_intr(struct ata_port *ap) return; /* ignore interim PIO setup fis interrupts */ - if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS)) + if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS)) return; if (ata_ratelimit()) @@ -956,7 +1091,7 @@ static void ahci_irq_clear(struct ata_port *ap) static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; struct ahci_host_priv *hpriv; unsigned int i, handled = 0; void __iomem *mmio; @@ -964,8 +1099,8 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *r VPRINTK("ENTER\n"); - hpriv = host_set->private_data; - mmio = host_set->mmio_base; + hpriv = host->private_data; + mmio = host->mmio_base; /* sigh. 0xffffffff is a valid return from h/w */ irq_stat = readl(mmio + HOST_IRQ_STAT); @@ -973,22 +1108,22 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *r if (!irq_stat) return IRQ_NONE; - spin_lock(&host_set->lock); + spin_lock(&host->lock); - for (i = 0; i < host_set->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; if (!(irq_stat & (1 << i))) continue; - ap = host_set->ports[i]; + ap = host->ports[i]; if (ap) { ahci_host_intr(ap); VPRINTK("port %u\n", i); } else { VPRINTK("port %u (no irq)\n", i); if (ata_ratelimit()) - dev_printk(KERN_WARNING, host_set->dev, + dev_printk(KERN_WARNING, host->dev, "interrupt on disabled port %u\n", i); } @@ -1000,7 +1135,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *r handled = 1; } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); VPRINTK("EXIT\n"); @@ -1022,7 +1157,7 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) static void ahci_freeze(struct ata_port *ap) { - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); /* turn IRQ off */ @@ -1031,7 +1166,7 @@ static void ahci_freeze(struct ata_port *ap) static void ahci_thaw(struct ata_port *ap) { - void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); u32 tmp; @@ -1046,10 +1181,13 @@ static void ahci_thaw(struct ata_port *ap) static void ahci_error_handler(struct ata_port *ap) { + void __iomem *mmio = ap->host->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { /* restart engine */ - ahci_stop_engine(ap); - ahci_start_engine(ap); + ahci_stop_engine(port_mmio); + ahci_start_engine(port_mmio); } /* perform recovery */ @@ -1060,15 +1198,176 @@ static void ahci_error_handler(struct ata_port *ap) static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + void __iomem *mmio = ap->host->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); if (qc->flags & ATA_QCFLAG_FAILED) qc->err_mask |= AC_ERR_OTHER; if (qc->err_mask) { /* make DMA engine forget about the failed command */ - ahci_stop_engine(ap); - ahci_start_engine(ap); + ahci_stop_engine(port_mmio); + ahci_start_engine(port_mmio); + } +} + +static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + const char *emsg = NULL; + int rc; + + rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); + if (rc) { + ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc); + ahci_init_port(port_mmio, hpriv->cap, + pp->cmd_slot_dma, pp->rx_fis_dma); + } + + return rc; +} + +static int ahci_port_resume(struct ata_port *ap) +{ + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = ap->host->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + + ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma); + + return 0; +} + +static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + void __iomem *mmio = host->mmio_base; + u32 ctl; + + if (mesg.event == PM_EVENT_SUSPEND) { + /* AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + return ata_pci_device_suspend(pdev, mesg); +} + +static int ahci_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = host->mmio_base; + int rc; + + ata_pci_device_do_resume(pdev); + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_reset_controller(mmio, pdev); + if (rc) + return rc; + + ahci_init_controller(mmio, pdev, host->n_ports, hpriv->cap); } + + ata_host_resume(host); + + return 0; +} + +static int ahci_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp; + void __iomem *mmio = ap->host->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + void *mem; + dma_addr_t mem_dma; + int rc; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + memset(pp, 0, sizeof(*pp)); + + rc = ata_pad_alloc(ap, dev); + if (rc) { + kfree(pp); + return rc; + } + + mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); + if (!mem) { + ata_pad_free(ap, dev); + kfree(pp); + return -ENOMEM; + } + memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = mem; + pp->cmd_slot_dma = mem_dma; + + mem += AHCI_CMD_SLOT_SZ; + mem_dma += AHCI_CMD_SLOT_SZ; + + /* + * Second item: Received-FIS area + */ + pp->rx_fis = mem; + pp->rx_fis_dma = mem_dma; + + mem += AHCI_RX_FIS_SZ; + mem_dma += AHCI_RX_FIS_SZ; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = mem; + pp->cmd_tbl_dma = mem_dma; + + ap->private_data = pp; + + /* initialize port */ + ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma); + + return 0; +} + +static void ahci_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + const char *emsg = NULL; + int rc; + + /* de-initialize port */ + rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); + if (rc) + ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc); + + ap->private_data = NULL; + dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, + pp->cmd_slot, pp->cmd_slot_dma); + ata_pad_free(ap, dev); + kfree(pp); } static void ahci_setup_port(struct ata_ioports *port, unsigned long base, @@ -1089,47 +1388,12 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) struct ahci_host_priv *hpriv = probe_ent->private_data; struct pci_dev *pdev = to_pci_dev(probe_ent->dev); void __iomem *mmio = probe_ent->mmio_base; - u32 tmp, cap_save; - unsigned int i, j, using_dac; + unsigned int i, using_dac; int rc; - void __iomem *port_mmio; - - cap_save = readl(mmio + HOST_CAP); - cap_save &= ( (1<<28) | (1<<17) ); - cap_save |= (1 << 27); - /* global controller reset */ - tmp = readl(mmio + HOST_CTL); - if ((tmp & HOST_RESET) == 0) { - writel(tmp | HOST_RESET, mmio + HOST_CTL); - readl(mmio + HOST_CTL); /* flush */ - } - - /* reset must complete within 1 second, or - * the hardware should be considered fried. - */ - ssleep(1); - - tmp = readl(mmio + HOST_CTL); - if (tmp & HOST_RESET) { - dev_printk(KERN_ERR, &pdev->dev, - "controller reset failed (0x%x)\n", tmp); - return -EIO; - } - - writel(HOST_AHCI_EN, mmio + HOST_CTL); - (void) readl(mmio + HOST_CTL); /* flush */ - writel(cap_save, mmio + HOST_CAP); - writel(0xf, mmio + HOST_PORTS_IMPL); - (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ - - if (pdev->vendor == PCI_VENDOR_ID_INTEL) { - u16 tmp16; - - pci_read_config_word(pdev, 0x92, &tmp16); - tmp16 |= 0xf; - pci_write_config_word(pdev, 0x92, tmp16); - } + rc = ahci_reset_controller(mmio, pdev); + if (rc) + return rc; hpriv->cap = readl(mmio + HOST_CAP); hpriv->port_map = readl(mmio + HOST_PORTS_IMPL); @@ -1165,63 +1429,10 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) } } - for (i = 0; i < probe_ent->n_ports; i++) { -#if 0 /* BIOSen initialize this incorrectly */ - if (!(hpriv->port_map & (1 << i))) - continue; -#endif - - port_mmio = ahci_port_base(mmio, i); - VPRINTK("mmio %p port_mmio %p\n", mmio, port_mmio); - - ahci_setup_port(&probe_ent->port[i], - (unsigned long) mmio, i); + for (i = 0; i < probe_ent->n_ports; i++) + ahci_setup_port(&probe_ent->port[i], (unsigned long) mmio, i); - /* make sure port is not active */ - tmp = readl(port_mmio + PORT_CMD); - VPRINTK("PORT_CMD 0x%x\n", tmp); - if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | - PORT_CMD_FIS_RX | PORT_CMD_START)) { - tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | - PORT_CMD_FIS_RX | PORT_CMD_START); - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - - /* spec says 500 msecs for each bit, so - * this is slightly incorrect. - */ - msleep(500); - } - - writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD); - - j = 0; - while (j < 100) { - msleep(10); - tmp = readl(port_mmio + PORT_SCR_STAT); - if ((tmp & 0xf) == 0x3) - break; - j++; - } - - tmp = readl(port_mmio + PORT_SCR_ERR); - VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); - writel(tmp, port_mmio + PORT_SCR_ERR); - - /* ack any pending irq events for this port */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); - if (tmp) - writel(tmp, port_mmio + PORT_IRQ_STAT); - - writel(1 << i, mmio + HOST_IRQ_STAT); - } - - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); - writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); + ahci_init_controller(mmio, pdev, probe_ent->n_ports, hpriv->cap); pci_set_master(pdev); @@ -1370,7 +1581,7 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) memset(hpriv, 0, sizeof(*hpriv)); probe_ent->sht = ahci_port_info[board_idx].sht; - probe_ent->host_flags = ahci_port_info[board_idx].host_flags; + probe_ent->port_flags = ahci_port_info[board_idx].flags; probe_ent->pio_mask = ahci_port_info[board_idx].pio_mask; probe_ent->udma_mask = ahci_port_info[board_idx].udma_mask; probe_ent->port_ops = ahci_port_info[board_idx].port_ops; @@ -1388,9 +1599,9 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) goto err_out_hpriv; - if (!(probe_ent->host_flags & AHCI_FLAG_NO_NCQ) && + if (!(probe_ent->port_flags & AHCI_FLAG_NO_NCQ) && (hpriv->cap & HOST_CAP_NCQ)) - probe_ent->host_flags |= ATA_FLAG_NCQ; + probe_ent->port_flags |= ATA_FLAG_NCQ; ahci_print_info(probe_ent); @@ -1421,27 +1632,27 @@ err_out: static void ahci_remove_one (struct pci_dev *pdev) { struct device *dev = pci_dev_to_dev(pdev); - struct ata_host_set *host_set = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = host_set->private_data; + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; unsigned int i; int have_msi; - for (i = 0; i < host_set->n_ports; i++) - ata_port_detach(host_set->ports[i]); + for (i = 0; i < host->n_ports; i++) + ata_port_detach(host->ports[i]); have_msi = hpriv->flags & AHCI_FLAG_MSI; - free_irq(host_set->irq, host_set); + free_irq(host->irq, host); - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; - ata_scsi_release(ap->host); - scsi_host_put(ap->host); + ata_scsi_release(ap->scsi_host); + scsi_host_put(ap->scsi_host); } kfree(hpriv); - pci_iounmap(pdev, host_set->mmio_base); - kfree(host_set); + pci_iounmap(pdev, host->mmio_base); + kfree(host); if (have_msi) pci_disable_msi(pdev); @@ -1454,7 +1665,7 @@ static void ahci_remove_one (struct pci_dev *pdev) static int __init ahci_init(void) { - return pci_module_init(&ahci_pci_driver); + return pci_register_driver(&ahci_pci_driver); } static void __exit ahci_exit(void) diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c new file mode 100644 index 0000000..1d1c30a --- /dev/null +++ b/drivers/ata/ata_generic.c @@ -0,0 +1,252 @@ +/* + * ata_generic.c - Generic PATA/SATA controller driver. + * Copyright 2005 Red Hat Inc <alan@redhat.com>, all rights reserved. + * + * Elements from ide/pci/generic.c + * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> + * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com> + * + * May be copied or modified under the terms of the GNU General Public License + * + * Driver for PCI IDE interfaces implementing the standard bus mastering + * interface functionality. This assumes the BIOS did the drive set up and + * tuning for us. By default we do not grab all IDE class devices as they + * may have other drivers or need fixups to avoid problems. Instead we keep + * a default list of stuff without documentation/driver that appears to + * work. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "ata_generic" +#define DRV_VERSION "0.2.6" + +/* + * A generic parallel ATA driver using libata + */ + +/** + * generic_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int generic_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + + +/** + * generic_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * @classes: + * + * LOCKING: + * None (inherited from caller). + */ + + +static void generic_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, generic_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * generic_set_mode - mode setting + * @ap: interface to set up + * + * Use a non standard set_mode function. We don't want to be tuned. + * The BIOS configured everything. Our job is not to fiddle. We + * read the dma enabled bits from the PCI configuration of the device + * and respect them. + */ + +static void generic_set_mode(struct ata_port *ap) +{ + int dma_enabled = 0; + int i; + + /* Bits 5 and 6 indicate if DMA is active on master/slave */ + if (ap->ioaddr.bmdma_addr) + dma_enabled = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev)) { + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = XFER_MW_DMA_0; + /* We do need the right mode information for DMA or PIO + and this comes from the current configuration flags */ + if (dma_enabled & (1 << (5 + i))) { + dev->xfer_mode = XFER_MW_DMA_0; + dev->xfer_shift = ATA_SHIFT_MWDMA; + dev->flags &= ~ATA_DFLAG_PIO; + } else { + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } + } +} + +static struct scsi_host_template generic_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations generic_port_ops = { + .set_mode = generic_set_mode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = generic_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int all_generic_ide; /* Set to claim all devices */ + +/** + * ata_generic_init - attach generic IDE + * @dev: PCI device found + * @id: match entry + * + * Called each time a matching IDE interface is found. We check if the + * interface is one we wish to claim and if so we perform any chip + * specific hacks then let the ATA layer do the heavy lifting. + */ + +static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + u16 command; + static struct ata_port_info info = { + .sht = &generic_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &generic_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + /* Don't use the generic entry unless instructed to do so */ + if (id->driver_data == 1 && all_generic_ide == 0) + return -ENODEV; + + /* Devices that need care */ + if (dev->vendor == PCI_VENDOR_ID_UMC && + dev->device == PCI_DEVICE_ID_UMC_UM8886A && + (!(PCI_FUNC(dev->devfn) & 1))) + return -ENODEV; + + if (dev->vendor == PCI_VENDOR_ID_OPTI && + dev->device == PCI_DEVICE_ID_OPTI_82C558 && + (!(PCI_FUNC(dev->devfn) & 1))) + return -ENODEV; + + /* Don't re-enable devices in generic mode or we will break some + motherboards with disabled and unused IDE controllers */ + pci_read_config_word(dev, PCI_COMMAND, &command); + if (!(command & PCI_COMMAND_IO)) + return -ENODEV; + + if (dev->vendor == PCI_VENDOR_ID_AL) + ata_pci_clear_simplex(dev); + + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id ata_generic[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF), }, + { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, + { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, + /* Must come last. If you add entries adjust this table appropriately */ + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1}, + { 0, }, +}; + +static struct pci_driver ata_generic_pci_driver = { + .name = DRV_NAME, + .id_table = ata_generic, + .probe = ata_generic_init_one, + .remove = ata_pci_remove_one +}; + +static int __init ata_generic_init(void) +{ + return pci_module_init(&ata_generic_pci_driver); +} + + +static void __exit ata_generic_exit(void) +{ + pci_unregister_driver(&ata_generic_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for generic ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ata_generic); +MODULE_VERSION(DRV_VERSION); + +module_init(ata_generic_init); +module_exit(ata_generic_exit); + +module_param(all_generic_ide, int, 0); diff --git a/drivers/scsi/ata_piix.c b/drivers/ata/ata_piix.c index a9bb3cb..965b4f0 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -93,7 +93,7 @@ #include <linux/libata.h> #define DRV_NAME "ata_piix" -#define DRV_VERSION "2.00" +#define DRV_VERSION "2.00ac6" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ @@ -116,15 +116,18 @@ enum { PIIX_80C_SEC = (1 << 7) | (1 << 6), /* controller IDs */ - piix4_pata = 0, - ich5_pata = 1, - ich5_sata = 2, - esb_sata = 3, - ich6_sata = 4, - ich6_sata_ahci = 5, - ich6m_sata_ahci = 6, - ich7m_sata_ahci = 7, - ich8_sata_ahci = 8, + piix_pata_33 = 0, /* PIIX3 or 4 at 33Mhz */ + ich_pata_33 = 1, /* ICH up to UDMA 33 only */ + ich_pata_66 = 2, /* ICH up to 66 Mhz */ + ich_pata_100 = 3, /* ICH up to UDMA 100 */ + ich_pata_133 = 4, /* ICH up to UDMA 133 */ + ich5_sata = 5, + esb_sata = 6, + ich6_sata = 7, + ich6_sata_ahci = 8, + ich6m_sata_ahci = 9, + ich7m_sata_ahci = 10, + ich8_sata_ahci = 11, /* constants for mapping table */ P0 = 0, /* port 0 */ @@ -152,20 +155,55 @@ struct piix_host_priv { static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void piix_host_stop(struct ata_host_set *host_set); -static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); -static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); +static void piix_host_stop(struct ata_host *host); static void piix_pata_error_handler(struct ata_port *ap); +static void ich_pata_error_handler(struct ata_port *ap); static void piix_sata_error_handler(struct ata_port *ap); +static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); +static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); +static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev); static unsigned int in_module_init = 1; static const struct pci_device_id piix_pci_tbl[] = { #ifdef ATA_ENABLE_PATA - { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, - { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, - { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, - { 0x8086, 0x27df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, + /* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */ + /* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */ + { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel PIIX4 */ + { 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + /* Intel PIIX4 */ + { 0x8086, 0x7601, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + /* Intel PIIX */ + { 0x8086, 0x84CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, + /* Intel ICH (i810, i815, i840) UDMA 66*/ + { 0x8086, 0x2411, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_66 }, + /* Intel ICH0 : UDMA 33*/ + { 0x8086, 0x2421, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_33 }, + /* Intel ICH2M */ + { 0x8086, 0x244A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH2 (i810E2, i845, 850, 860) UDMA 100 */ + { 0x8086, 0x244B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH3M */ + { 0x8086, 0x248A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH3 (E7500/1) UDMA 100 */ + { 0x8086, 0x248B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH4 (i845GV, i845E, i852, i855) UDMA 100 */ + { 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + { 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH5 */ + { 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 }, + /* C-ICH (i810E2) */ + { 0x8086, 0x245B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* ESB (855GME/875P + 6300ESB) UDMA 100 */ + { 0x8086, 0x25A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* ICH6 (and 6) (i915) UDMA 100 */ + { 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* ICH7/7-R (i945, i975) UDMA 100*/ + { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 }, + { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, #endif /* NOTE: The following PCI ids must be kept in sync with the @@ -264,6 +302,39 @@ static const struct ata_port_operations piix_pata_ops = { .host_stop = piix_host_stop, }; +static const struct ata_port_operations ich_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = piix_set_piomode, + .set_dmamode = ich_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ich_pata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + static const struct ata_port_operations piix_sata_ops = { .port_disable = ata_port_disable, @@ -379,38 +450,59 @@ static const struct piix_map_db *piix_map_db_table[] = { }; static struct ata_port_info piix_port_info[] = { - /* piix4_pata */ + /* piix_pata_33: 0: PIIX3 or 4 at 33MHz */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ -#if 0 - .mwdma_mask = 0x06, /* mwdma1-2 */ -#else - .mwdma_mask = 0x00, /* mwdma broken */ -#endif + .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ .udma_mask = ATA_UDMA_MASK_40C, .port_ops = &piix_pata_ops, }, - /* ich5_pata */ + /* ich_pata_33: 1 ICH0 - ICH at 33Mhz*/ + { + .sht = &piix_sht, + .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio 0-4 */ + .mwdma_mask = 0x06, /* Check: maybe 0x07 */ + .udma_mask = ATA_UDMA2, /* UDMA33 */ + .port_ops = &ich_pata_ops, + }, + /* ich_pata_66: 2 ICH controllers up to 66MHz */ + { + .sht = &piix_sht, + .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio 0-4 */ + .mwdma_mask = 0x06, /* MWDMA0 is broken on chip */ + .udma_mask = ATA_UDMA4, + .port_ops = &ich_pata_ops, + }, + + /* ich_pata_100: 3 */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, + .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ -#if 0 .mwdma_mask = 0x06, /* mwdma1-2 */ -#else - .mwdma_mask = 0x00, /* mwdma broken */ -#endif - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &piix_pata_ops, + .udma_mask = ATA_UDMA5, /* udma0-5 */ + .port_ops = &ich_pata_ops, + }, + + /* ich_pata_133: 4 ICH with full UDMA6 */ + { + .sht = &piix_sht, + .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, + .pio_mask = 0x1f, /* pio 0-4 */ + .mwdma_mask = 0x06, /* Check: maybe 0x07 */ + .udma_mask = ATA_UDMA6, /* UDMA133 */ + .port_ops = &ich_pata_ops, }, - /* ich5_sata */ + /* ich5_sata: 5 */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -418,10 +510,10 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* i6300esb_sata */ + /* i6300esb_sata: 6 */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -429,10 +521,10 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich6_sata */ + /* ich6_sata: 7 */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -440,10 +532,10 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich6_sata_ahci */ + /* ich6_sata_ahci: 8 */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ @@ -452,10 +544,10 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich6m_sata_ahci */ + /* ich6m_sata_ahci: 9 */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ @@ -464,7 +556,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich7m_sata_ahci */ + /* ich7m_sata_ahci: 10 */ { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | @@ -476,10 +568,10 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich8_sata_ahci */ + /* ich8_sata_ahci: 11 */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | + .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ @@ -487,6 +579,7 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, }, + }; static struct pci_bits piix_enable_bits[] = { @@ -515,9 +608,10 @@ MODULE_PARM_DESC(force_pcs, "force honoring or ignoring PCS to work around " * LOCKING: * None (inherited from caller). */ -static void piix_pata_cbl_detect(struct ata_port *ap) + +static void ich_pata_cbl_detect(struct ata_port *ap) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 tmp, mask; /* no 80c support in host controller? */ @@ -525,7 +619,7 @@ static void piix_pata_cbl_detect(struct ata_port *ap) goto cbl40; /* check BIOS cable detect results */ - mask = ap->hard_port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; + mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; pci_read_config_byte(pdev, PIIX_IOCFG, &tmp); if ((tmp & mask) == 0) goto cbl40; @@ -535,30 +629,26 @@ static void piix_pata_cbl_detect(struct ata_port *ap) cbl40: ap->cbl = ATA_CBL_PATA40; - ap->udma_mask &= ATA_UDMA_MASK_40C; } /** * piix_pata_prereset - prereset for PATA host controller * @ap: Target port * - * Prereset including cable detection. * * LOCKING: * None (inherited from caller). */ static int piix_pata_prereset(struct ata_port *ap) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); - if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { + if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) { ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; return 0; } - - piix_pata_cbl_detect(ap); - + ap->cbl = ATA_CBL_PATA40; return ata_std_prereset(ap); } @@ -568,6 +658,36 @@ static void piix_pata_error_handler(struct ata_port *ap) ata_std_postreset); } + +/** + * ich_pata_prereset - prereset for PATA host controller + * @ap: Target port + * + * + * LOCKING: + * None (inherited from caller). + */ +static int ich_pata_prereset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) { + ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; + return 0; + } + + ich_pata_cbl_detect(ap); + + return ata_std_prereset(ap); +} + +static void ich_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ich_pata_prereset, ata_std_softreset, NULL, + ata_std_postreset); +} + /** * piix_sata_present_mask - determine present mask for SATA host controller * @ap: Target port @@ -583,10 +703,10 @@ static void piix_pata_error_handler(struct ata_port *ap) */ static unsigned int piix_sata_present_mask(struct ata_port *ap) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - struct piix_host_priv *hpriv = ap->host_set->private_data; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct piix_host_priv *hpriv = ap->host->private_data; const unsigned int *map = hpriv->map; - int base = 2 * ap->hard_port_no; + int base = 2 * ap->port_no; unsigned int present_mask = 0; int port, i; u16 pcs; @@ -663,12 +783,19 @@ static void piix_sata_error_handler(struct ata_port *ap) static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) { unsigned int pio = adev->pio_mode - XFER_PIO_0; - struct pci_dev *dev = to_pci_dev(ap->host_set->dev); + struct pci_dev *dev = to_pci_dev(ap->host->dev); unsigned int is_slave = (adev->devno != 0); - unsigned int master_port= ap->hard_port_no ? 0x42 : 0x40; + unsigned int master_port= ap->port_no ? 0x42 : 0x40; unsigned int slave_port = 0x44; u16 master_data; u8 slave_data; + u8 udma_enable; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for ICH controllers. + */ static const /* ISP RTC */ u8 timings[][2] = { { 0, 0 }, @@ -677,20 +804,30 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) { 2, 1 }, { 2, 3 }, }; + if (pio >= 2) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE enable */ + + /* Intel specifies that the PPE functionality is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + pci_read_config_word(dev, master_port, &master_data); if (is_slave) { + /* Enable SITRE (seperate slave timing register) */ master_data |= 0x4000; - /* enable PPE, IE and TIME */ - master_data |= 0x0070; + /* enable PPE1, IE1 and TIME1 as needed */ + master_data |= (control << 4); pci_read_config_byte(dev, slave_port, &slave_data); - slave_data &= (ap->hard_port_no ? 0x0f : 0xf0); - slave_data |= - (timings[pio][0] << 2) | - (timings[pio][1] << (ap->hard_port_no ? 4 : 0)); + slave_data &= (ap->port_no ? 0x0f : 0xf0); + /* Load the timing nibble for this slave */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); } else { + /* Master keeps the bits in a different format */ master_data &= 0xccf8; - /* enable PPE, IE and TIME */ - master_data |= 0x0007; + /* Enable PPE, IE and TIME as appropriate */ + master_data |= control; master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); @@ -698,13 +835,23 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) pci_write_config_word(dev, master_port, master_data); if (is_slave) pci_write_config_byte(dev, slave_port, slave_data); + + /* Ensure the UDMA bit is off - it will be turned back on if + UDMA is selected */ + + if (ap->udma_mask) { + pci_read_config_byte(dev, 0x48, &udma_enable); + udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); + pci_write_config_byte(dev, 0x48, udma_enable); + } } /** - * piix_set_dmamode - Initialize host controller PATA PIO timings + * do_pata_set_dmamode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring - * @adev: um + * @adev: Drive in question * @udma: udma mode, 0 - 6 + * @is_ich: set if the chip is an ICH device * * Set UDMA mode for device, in host controller PCI config space. * @@ -712,70 +859,140 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) * None (inherited from caller). */ -static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) +static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, int isich) { - unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */ - struct pci_dev *dev = to_pci_dev(ap->host_set->dev); - u8 maslave = ap->hard_port_no ? 0x42 : 0x40; - u8 speed = udma; - unsigned int drive_dn = (ap->hard_port_no ? 2 : 0) + adev->devno; - int a_speed = 3 << (drive_dn * 4); - int u_flag = 1 << drive_dn; - int v_flag = 0x01 << drive_dn; - int w_flag = 0x10 << drive_dn; - int u_speed = 0; - int sitre; - u16 reg4042, reg4a; - u8 reg48, reg54, reg55; - - pci_read_config_word(dev, maslave, ®4042); - DPRINTK("reg4042 = 0x%04x\n", reg4042); - sitre = (reg4042 & 0x4000) ? 1 : 0; - pci_read_config_byte(dev, 0x48, ®48); - pci_read_config_word(dev, 0x4a, ®4a); - pci_read_config_byte(dev, 0x54, ®54); - pci_read_config_byte(dev, 0x55, ®55); - - switch(speed) { - case XFER_UDMA_4: - case XFER_UDMA_2: u_speed = 2 << (drive_dn * 4); break; - case XFER_UDMA_6: - case XFER_UDMA_5: - case XFER_UDMA_3: - case XFER_UDMA_1: u_speed = 1 << (drive_dn * 4); break; - case XFER_UDMA_0: u_speed = 0 << (drive_dn * 4); break; - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: break; - default: - BUG(); - return; - } + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u8 master_port = ap->port_no ? 0x42 : 0x40; + u16 master_data; + u8 speed = adev->dma_mode; + int devid = adev->devno + 2 * ap->port_no; + u8 udma_enable; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(dev, master_port, &master_data); + pci_read_config_byte(dev, 0x48, &udma_enable); if (speed >= XFER_UDMA_0) { - if (!(reg48 & u_flag)) - pci_write_config_byte(dev, 0x48, reg48 | u_flag); - if (speed == XFER_UDMA_5) { - pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); - } else { - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + unsigned int udma = adev->dma_mode - XFER_UDMA_0; + u16 udma_timing; + u16 ideconf; + int u_clock, u_speed; + + /* + * UDMA is handled by a combination of clock switching and + * selection of dividers + * + * Handy rule: Odd modes are UDMATIMx 01, even are 02 + * except UDMA0 which is 00 + */ + u_speed = min(2 - (udma & 1), udma); + if (udma == 5) + u_clock = 0x1000; /* 100Mhz */ + else if (udma > 2) + u_clock = 1; /* 66Mhz */ + else + u_clock = 0; /* 33Mhz */ + + udma_enable |= (1 << devid); + + /* Load the CT/RP selection */ + pci_read_config_word(dev, 0x4A, &udma_timing); + udma_timing &= ~(3 << (4 * devid)); + udma_timing |= u_speed << (4 * devid); + pci_write_config_word(dev, 0x4A, udma_timing); + + if (isich) { + /* Select a 33/66/100Mhz clock */ + pci_read_config_word(dev, 0x54, &ideconf); + ideconf &= ~(0x1001 << devid); + ideconf |= u_clock << devid; + /* For ICH or later we should set bit 10 for better + performance (WR_PingPong_En) */ + pci_write_config_word(dev, 0x54, ideconf); } - if ((reg4a & a_speed) != u_speed) - pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); - if (speed > XFER_UDMA_2) { - if (!(reg54 & v_flag)) - pci_write_config_byte(dev, 0x54, reg54 | v_flag); - } else - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); } else { - if (reg48 & u_flag) - pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); - if (reg4a & a_speed) - pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); - if (reg54 & v_flag) - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); - if (reg55 & w_flag) - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + u8 slave_data; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + control = 3; /* IORDY|TIME1 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + if (adev->devno) { /* Slave */ + master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ + master_data |= control << 4; + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= (0x0F + 0xE1 * ap->port_no); + /* Load the matching timing */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); + pci_write_config_byte(dev, 0x44, slave_data); + } else { /* Master */ + master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY + and master timing bits */ + master_data |= control; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + udma_enable &= ~(1 << devid); + pci_write_config_word(dev, master_port, master_data); } + /* Don't scribble on 0x48 if the controller does not support UDMA */ + if (ap->udma_mask) + pci_write_config_byte(dev, 0x48, udma_enable); +} + +/** + * piix_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set MW/UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + do_pata_set_dmamode(ap, adev, 0); +} + +/** + * ich_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set MW/UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + do_pata_set_dmamode(ap, adev, 1); } #define AHCI_PCI_BAR 5 @@ -867,13 +1084,13 @@ static void __devinit piix_init_pcs(struct pci_dev *pdev, if (force_pcs == 1) { dev_printk(KERN_INFO, &pdev->dev, "force ignoring PCS (0x%x)\n", new_pcs); - pinfo[0].host_flags |= PIIX_FLAG_IGNORE_PCS; - pinfo[1].host_flags |= PIIX_FLAG_IGNORE_PCS; + pinfo[0].flags |= PIIX_FLAG_IGNORE_PCS; + pinfo[1].flags |= PIIX_FLAG_IGNORE_PCS; } else if (force_pcs == 2) { dev_printk(KERN_INFO, &pdev->dev, "force honoring PCS (0x%x)\n", new_pcs); - pinfo[0].host_flags &= ~PIIX_FLAG_IGNORE_PCS; - pinfo[1].host_flags &= ~PIIX_FLAG_IGNORE_PCS; + pinfo[0].flags &= ~PIIX_FLAG_IGNORE_PCS; + pinfo[1].flags &= ~PIIX_FLAG_IGNORE_PCS; } } @@ -904,7 +1121,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, case IDE: WARN_ON((i & 1) || map[i + 1] != IDE); - pinfo[i / 2] = piix_port_info[ich5_pata]; + pinfo[i / 2] = piix_port_info[ich_pata_100]; pinfo[i / 2].private_data = hpriv; i++; printk(" IDE IDE"); @@ -913,7 +1130,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, default: printk(" P%d", map[i]); if (i & 1) - pinfo[i / 2].host_flags |= ATA_FLAG_SLAVE_POSS; + pinfo[i / 2].flags |= ATA_FLAG_SLAVE_POSS; break; } } @@ -948,7 +1165,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_port_info port_info[2]; struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; struct piix_host_priv *hpriv; - unsigned long host_flags; + unsigned long port_flags; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, @@ -967,9 +1184,9 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) port_info[0].private_data = hpriv; port_info[1].private_data = hpriv; - host_flags = port_info[0].host_flags; + port_flags = port_info[0].flags; - if (host_flags & PIIX_FLAG_AHCI) { + if (port_flags & PIIX_FLAG_AHCI) { u8 tmp; pci_read_config_byte(pdev, PIIX_SCC, &tmp); if (tmp == PIIX_AHCI_DEVICE) { @@ -980,7 +1197,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) } /* Initialize SATA map */ - if (host_flags & ATA_FLAG_SATA) { + if (port_flags & ATA_FLAG_SATA) { piix_init_sata_map(pdev, port_info, piix_map_db_table[ent->driver_data]); piix_init_pcs(pdev, port_info, @@ -993,7 +1210,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) * MSI is disabled (and it is disabled, as we don't use * message-signalled interrupts currently). */ - if (host_flags & PIIX_FLAG_CHECKINTR) + if (port_flags & PIIX_FLAG_CHECKINTR) pci_intx(pdev, 1); if (piix_check_450nx_errata(pdev)) { @@ -1008,19 +1225,21 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return ata_pci_init_one(pdev, ppinfo, 2); } -static void piix_host_stop(struct ata_host_set *host_set) +static void piix_host_stop(struct ata_host *host) { - if (host_set->next == NULL) - kfree(host_set->private_data); - ata_host_stop(host_set); + struct piix_host_priv *hpriv = host->private_data; + + ata_host_stop(host); + + kfree(hpriv); } static int __init piix_init(void) { int rc; - DPRINTK("pci_module_init\n"); - rc = pci_module_init(&piix_pci_driver); + DPRINTK("pci_register_driver\n"); + rc = pci_register_driver(&piix_pci_driver); if (rc) return rc; @@ -1037,4 +1256,3 @@ static void __exit piix_exit(void) module_init(piix_init); module_exit(piix_exit); - diff --git a/drivers/scsi/libata-core.c b/drivers/ata/libata-core.c index 73dd6c8..1c93154 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/ata/libata-core.c @@ -50,7 +50,6 @@ #include <linux/jiffies.h> #include <linux/scatterlist.h> #include <scsi/scsi.h> -#include "scsi_priv.h" #include <scsi/scsi_cmnd.h> #include <scsi/scsi_host.h> #include <linux/libata.h> @@ -387,9 +386,13 @@ static const char *ata_mode_string(unsigned int xfer_mask) "PIO2", "PIO3", "PIO4", + "PIO5", + "PIO6", "MWDMA0", "MWDMA1", "MWDMA2", + "MWDMA3", + "MWDMA4", "UDMA/16", "UDMA/25", "UDMA/33", @@ -876,6 +879,23 @@ static unsigned int ata_id_xfermask(const u16 *id) mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; + if (ata_id_is_cfa(id)) { + /* + * Process compact flash extended modes + */ + int pio = id[163] & 0x7; + int dma = (id[163] >> 3) & 7; + + if (pio) + pio_mask |= (1 << 5); + if (pio > 1) + pio_mask |= (1 << 6); + if (dma) + mwdma_mask |= (1 << 3); + if (dma > 1) + mwdma_mask |= (1 << 4); + } + udma_mask = 0; if (id[ATA_ID_FIELD_VALID] & (1 << 2)) udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; @@ -1315,7 +1335,7 @@ static void ata_dev_config_ncq(struct ata_device *dev, } if (ap->flags & ATA_FLAG_NCQ) { - hdepth = min(ap->host->can_queue, ATA_MAX_QUEUE - 1); + hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1); dev->flags |= ATA_DFLAG_NCQ; } @@ -1329,12 +1349,13 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap) { int i; - if (ap->host) { - ap->host->max_cmd_len = 0; + if (ap->scsi_host) { + unsigned int len = 0; + for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->host->max_cmd_len = max_t(unsigned int, - ap->host->max_cmd_len, - ap->device[i].cdb_len); + len = max(len, ap->device[i].cdb_len); + + ap->scsi_host->max_cmd_len = len; } } @@ -1357,6 +1378,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) struct ata_port *ap = dev->ap; const u16 *id = dev->id; unsigned int xfer_mask; + char revbuf[7]; /* XYZ-99\0 */ int rc; if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { @@ -1400,6 +1422,15 @@ int ata_dev_configure(struct ata_device *dev, int print_info) /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { + if (ata_id_is_cfa(id)) { + if (id[162] & 1) /* CPRM may make this media unusable */ + ata_dev_printk(dev, KERN_WARNING, "ata%u: device %u supports DRM functions and may not be fully accessable.\n", + ap->id, dev->devno); + snprintf(revbuf, 7, "CFA"); + } + else + snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); + dev->n_sectors = ata_id_n_sectors(id); if (ata_id_has_lba(id)) { @@ -1418,9 +1449,9 @@ int ata_dev_configure(struct ata_device *dev, int print_info) /* print device info to dmesg */ if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, "ATA-%d, " + ata_dev_printk(dev, KERN_INFO, "%s, " "max %s, %Lu sectors: %s %s\n", - ata_id_major_version(id), + revbuf, ata_mode_string(xfer_mask), (unsigned long long)dev->n_sectors, lba_desc, ncq_desc); @@ -1441,9 +1472,9 @@ int ata_dev_configure(struct ata_device *dev, int print_info) /* print device info to dmesg */ if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, "ATA-%d, " + ata_dev_printk(dev, KERN_INFO, "%s, " "max %s, %Lu sectors: CHS %u/%u/%u\n", - ata_id_major_version(id), + revbuf, ata_mode_string(xfer_mask), (unsigned long long)dev->n_sectors, dev->cylinders, dev->heads, @@ -1528,7 +1559,7 @@ err_out_nosup: * Zero on success, negative errno otherwise. */ -static int ata_bus_probe(struct ata_port *ap) +int ata_bus_probe(struct ata_port *ap) { unsigned int classes[ATA_MAX_DEVICES]; int tries[ATA_MAX_DEVICES]; @@ -1632,7 +1663,7 @@ static int ata_bus_probe(struct ata_port *ap) * Modify @ap data structure such that the system * thinks that the entire port is enabled. * - * LOCKING: host_set lock, or some other form of + * LOCKING: host lock, or some other form of * serialization. */ @@ -1770,7 +1801,7 @@ struct ata_device *ata_dev_pair(struct ata_device *adev) * never attempt to probe or communicate with devices * on this port. * - * LOCKING: host_set lock, or some other form of + * LOCKING: host lock, or some other form of * serialization. */ @@ -1901,10 +1932,11 @@ int sata_set_spd(struct ata_port *ap) * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik */ /* - * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). * These were taken from ATA/ATAPI-6 standard, rev 0a, except - * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. + * for UDMA6, which is currently supported only by Maxtor drives. + * + * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0. */ static const struct ata_timing ata_timing[] = { @@ -1914,6 +1946,8 @@ static const struct ata_timing ata_timing[] = { { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, + { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 }, { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, @@ -1928,7 +1962,8 @@ static const struct ata_timing ata_timing[] = { { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, -/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */ + { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, + { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, @@ -2224,8 +2259,8 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) /* Record simplex status. If we selected DMA then the other * host channels are not permitted to do so. */ - if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX)) - ap->host_set->simplex_claimed = 1; + if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX)) + ap->host->simplex_claimed = 1; /* step5: chip specific finalisation */ if (ap->ops->post_set_mode) @@ -2247,7 +2282,7 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) * other threads. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static inline void ata_tf_to_host(struct ata_port *ap, @@ -2411,7 +2446,7 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * * LOCKING: * PCI/etc. bus probe sem. - * Obtains host_set lock. + * Obtains host lock. * * SIDE EFFECTS: * Sets ATA_FLAG_DISABLED if bus reset fails. @@ -3040,20 +3075,16 @@ static int ata_dma_blacklisted(const struct ata_device *dev) * known limits including host controller limits, device * blacklist, etc... * - * FIXME: The current implementation limits all transfer modes to - * the fastest of the lowested device on the port. This is not - * required on most controllers. - * * LOCKING: * None. */ static void ata_dev_xfermask(struct ata_device *dev) { struct ata_port *ap = dev->ap; - struct ata_host_set *hs = ap->host_set; + struct ata_host *host = ap->host; unsigned long xfer_mask; - int i; + /* controller modes available */ xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, ap->udma_mask); @@ -3063,34 +3094,31 @@ static void ata_dev_xfermask(struct ata_device *dev) if (ap->cbl == ATA_CBL_PATA40) xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); - /* FIXME: Use port-wide xfermask for now */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *d = &ap->device[i]; - - if (ata_dev_absent(d)) - continue; - - if (ata_dev_disabled(d)) { - /* to avoid violating device selection timing */ - xfer_mask &= ata_pack_xfermask(d->pio_mask, - UINT_MAX, UINT_MAX); - continue; - } + xfer_mask &= ata_pack_xfermask(dev->pio_mask, + dev->mwdma_mask, dev->udma_mask); + xfer_mask &= ata_id_xfermask(dev->id); - xfer_mask &= ata_pack_xfermask(d->pio_mask, - d->mwdma_mask, d->udma_mask); - xfer_mask &= ata_id_xfermask(d->id); - if (ata_dma_blacklisted(d)) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + /* + * CFA Advanced TrueIDE timings are not allowed on a shared + * cable + */ + if (ata_dev_pair(dev)) { + /* No PIO5 or PIO6 */ + xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5)); + /* No MWDMA3 or MWDMA 4 */ + xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3)); } - if (ata_dma_blacklisted(dev)) + if (ata_dma_blacklisted(dev)) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); ata_dev_printk(dev, KERN_WARNING, "device is on DMA blacklist, disabling DMA\n"); + } - if (hs->flags & ATA_HOST_SIMPLEX) { - if (hs->simplex_claimed) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + if ((host->flags & ATA_HOST_SIMPLEX) && host->simplex_claimed) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by " + "other device, disabling DMA\n"); } if (ap->ops->mode_filter) @@ -3180,7 +3208,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, * Unmap all mapped DMA memory associated with this command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_sg_clean(struct ata_queued_cmd *qc) @@ -3240,7 +3268,7 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) * associated with the current disk command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * */ static void ata_fill_sg(struct ata_queued_cmd *qc) @@ -3292,7 +3320,7 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) * supplied PACKET command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise @@ -3314,7 +3342,7 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) * Prepare ATA taskfile for submission. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_qc_prep(struct ata_queued_cmd *qc) { @@ -3336,7 +3364,7 @@ void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } * to point to a single memory buffer, @buf of byte length @buflen. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) @@ -3367,7 +3395,7 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) * elements. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, @@ -3386,7 +3414,7 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, * DMA-map the memory buffer associated with queued_cmd @qc. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, negative on error. @@ -3455,7 +3483,7 @@ skip_map: * DMA-map the scatter-gather table associated with queued_cmd @qc. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, negative on error. @@ -3964,7 +3992,7 @@ static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *q * Finish @qc which is running on standard HSM. * * LOCKING: - * If @in_wq is zero, spin_lock_irqsave(host_set lock). + * If @in_wq is zero, spin_lock_irqsave(host lock). * Otherwise, none on entry and grabs host lock. */ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) @@ -3976,8 +4004,8 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) if (in_wq) { spin_lock_irqsave(ap->lock, flags); - /* EH might have kicked in while host_set lock - * is released. + /* EH might have kicked in while host lock is + * released. */ qc = ata_qc_from_tag(ap, qc->tag); if (qc) { @@ -4342,7 +4370,7 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) * in case something prevents using it. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_qc_free(struct ata_queued_cmd *qc) { @@ -4395,7 +4423,7 @@ void __ata_qc_complete(struct ata_queued_cmd *qc) * command has completed, with either an ok or not-ok status. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_qc_complete(struct ata_queued_cmd *qc) { @@ -4458,7 +4486,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * and commands are completed accordingly. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Number of completed commands on success, -errno otherwise. @@ -4529,7 +4557,7 @@ static inline int ata_should_dma_map(struct ata_queued_cmd *qc) * writing the taskfile to hardware, starting the command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_qc_issue(struct ata_queued_cmd *qc) { @@ -4590,7 +4618,7 @@ err: * May be used as the qc_issue() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, AC_ERR_* mask on failure @@ -4719,7 +4747,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) * handled via polling with interrupts disabled (nIEN bit). * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * One if interrupt was handled, zero if not (shared irq). @@ -4806,14 +4834,14 @@ idle_irq: /** * ata_interrupt - Default ATA host interrupt handler * @irq: irq line (unused) - * @dev_instance: pointer to our ata_host_set information structure + * @dev_instance: pointer to our ata_host information structure * @regs: unused * * Default interrupt handler for PCI IDE devices. Calls * ata_host_intr() for each port that is not disabled. * * LOCKING: - * Obtains host_set lock during operation. + * Obtains host lock during operation. * * RETURNS: * IRQ_NONE or IRQ_HANDLED. @@ -4821,18 +4849,18 @@ idle_irq: irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int i; unsigned int handled = 0; unsigned long flags; /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ - spin_lock_irqsave(&host_set->lock, flags); + spin_lock_irqsave(&host->lock, flags); - for (i = 0; i < host_set->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; - ap = host_set->ports[i]; + ap = host->ports[i]; if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; @@ -4844,7 +4872,7 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) } } - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock_irqrestore(&host->lock, flags); return IRQ_RETVAL(handled); } @@ -5009,15 +5037,15 @@ int ata_flush_cache(struct ata_device *dev) return 0; } -static int ata_host_set_request_pm(struct ata_host_set *host_set, - pm_message_t mesg, unsigned int action, - unsigned int ehi_flags, int wait) +static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, + unsigned int action, unsigned int ehi_flags, + int wait) { unsigned long flags; int i, rc; - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; /* Previous resume operation might still be in * progress. Wait for PM_PENDING to clear. @@ -5057,11 +5085,11 @@ static int ata_host_set_request_pm(struct ata_host_set *host_set, } /** - * ata_host_set_suspend - suspend host_set - * @host_set: host_set to suspend + * ata_host_suspend - suspend host + * @host: host to suspend * @mesg: PM message * - * Suspend @host_set. Actual operation is performed by EH. This + * Suspend @host. Actual operation is performed by EH. This * function requests EH to perform PM operations and waits for EH * to finish. * @@ -5071,11 +5099,11 @@ static int ata_host_set_request_pm(struct ata_host_set *host_set, * RETURNS: * 0 on success, -errno on failure. */ -int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg) +int ata_host_suspend(struct ata_host *host, pm_message_t mesg) { int i, j, rc; - rc = ata_host_set_request_pm(host_set, mesg, 0, ATA_EHI_QUIET, 1); + rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1); if (rc) goto fail; @@ -5083,8 +5111,8 @@ int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg) * This happens if hotplug occurs between completion of device * suspension and here. */ - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; for (j = 0; j < ATA_MAX_DEVICES; j++) { struct ata_device *dev = &ap->device[j]; @@ -5099,30 +5127,30 @@ int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg) } } - host_set->dev->power.power_state = mesg; + host->dev->power.power_state = mesg; return 0; fail: - ata_host_set_resume(host_set); + ata_host_resume(host); return rc; } /** - * ata_host_set_resume - resume host_set - * @host_set: host_set to resume + * ata_host_resume - resume host + * @host: host to resume * - * Resume @host_set. Actual operation is performed by EH. This + * Resume @host. Actual operation is performed by EH. This * function requests EH to perform PM operations and returns. * Note that all resume operations are performed parallely. * * LOCKING: * Kernel thread context (may sleep). */ -void ata_host_set_resume(struct ata_host_set *host_set) +void ata_host_resume(struct ata_host *host) { - ata_host_set_request_pm(host_set, PMSG_ON, ATA_EH_SOFTRESET, - ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); - host_set->dev->power.power_state = PMSG_ON; + ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET, + ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); + host->dev->power.power_state = PMSG_ON; } /** @@ -5179,10 +5207,10 @@ void ata_port_stop (struct ata_port *ap) ata_pad_free(ap, dev); } -void ata_host_stop (struct ata_host_set *host_set) +void ata_host_stop (struct ata_host *host) { - if (host_set->mmio_base) - iounmap(host_set->mmio_base); + if (host->mmio_base) + iounmap(host->mmio_base); } /** @@ -5204,7 +5232,7 @@ void ata_dev_init(struct ata_device *dev) /* High bits of dev->flags are used to record warm plug * requests which occur asynchronously. Synchronize using - * host_set lock. + * host lock. */ spin_lock_irqsave(ap->lock, flags); dev->flags &= ~ATA_DFLAG_INIT_MASK; @@ -5218,45 +5246,33 @@ void ata_dev_init(struct ata_device *dev) } /** - * ata_host_init - Initialize an ata_port structure + * ata_port_init - Initialize an ata_port structure * @ap: Structure to initialize - * @host: associated SCSI mid-layer structure - * @host_set: Collection of hosts to which @ap belongs + * @host: Collection of hosts to which @ap belongs * @ent: Probe information provided by low-level driver * @port_no: Port number associated with this ata_port * - * Initialize a new ata_port structure, and its associated - * scsi_host. + * Initialize a new ata_port structure. * * LOCKING: * Inherited from caller. */ -static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, - struct ata_host_set *host_set, - const struct ata_probe_ent *ent, unsigned int port_no) +void ata_port_init(struct ata_port *ap, struct ata_host *host, + const struct ata_probe_ent *ent, unsigned int port_no) { unsigned int i; - host->max_id = 16; - host->max_lun = 1; - host->max_channel = 1; - host->unique_id = ata_unique_id++; - host->max_cmd_len = 12; - - ap->lock = &host_set->lock; + ap->lock = &host->lock; ap->flags = ATA_FLAG_DISABLED; - ap->id = host->unique_id; - ap->host = host; + ap->id = ata_unique_id++; ap->ctl = ATA_DEVCTL_OBS; - ap->host_set = host_set; + ap->host = host; ap->dev = ent->dev; ap->port_no = port_no; - ap->hard_port_no = - ent->legacy_mode ? ent->hard_port_no : port_no; ap->pio_mask = ent->pio_mask; ap->mwdma_mask = ent->mwdma_mask; ap->udma_mask = ent->udma_mask; - ap->flags |= ent->host_flags; + ap->flags |= ent->port_flags; ap->ops = ent->port_ops; ap->hw_sata_spd_limit = UINT_MAX; ap->active_tag = ATA_TAG_POISON; @@ -5298,9 +5314,30 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, } /** - * ata_host_add - Attach low-level ATA driver to system + * ata_port_init_shost - Initialize SCSI host associated with ATA port + * @ap: ATA port to initialize SCSI host for + * @shost: SCSI host associated with @ap + * + * Initialize SCSI host @shost associated with ATA port @ap. + * + * LOCKING: + * Inherited from caller. + */ +static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) +{ + ap->scsi_host = shost; + + shost->unique_id = ap->id; + shost->max_id = 16; + shost->max_lun = 1; + shost->max_channel = 1; + shost->max_cmd_len = 12; +} + +/** + * ata_port_add - Attach low-level ATA driver to system * @ent: Information provided by low-level driver - * @host_set: Collections of ports to which we add + * @host: Collections of ports to which we add * @port_no: Port number associated with this host * * Attach low-level ATA driver to system. @@ -5311,43 +5348,55 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * RETURNS: * New ata_port on success, for NULL on error. */ - -static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, - struct ata_host_set *host_set, +static struct ata_port * ata_port_add(const struct ata_probe_ent *ent, + struct ata_host *host, unsigned int port_no) { - struct Scsi_Host *host; + struct Scsi_Host *shost; struct ata_port *ap; - int rc; DPRINTK("ENTER\n"); if (!ent->port_ops->error_handler && - !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { + !(ent->port_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { printk(KERN_ERR "ata%u: no reset mechanism available\n", port_no); return NULL; } - host = scsi_host_alloc(ent->sht, sizeof(struct ata_port)); - if (!host) + shost = scsi_host_alloc(ent->sht, sizeof(struct ata_port)); + if (!shost) return NULL; - host->transportt = &ata_scsi_transport_template; - - ap = ata_shost_to_port(host); + shost->transportt = &ata_scsi_transport_template; - ata_host_init(ap, host, host_set, ent, port_no); + ap = ata_shost_to_port(shost); - rc = ap->ops->port_start(ap); - if (rc) - goto err_out; + ata_port_init(ap, host, ent, port_no); + ata_port_init_shost(ap, shost); return ap; +} -err_out: - scsi_host_put(host); - return NULL; +/** + * ata_sas_host_init - Initialize a host struct + * @host: host to initialize + * @dev: device host is attached to + * @flags: host flags + * @ops: port_ops + * + * LOCKING: + * PCI/etc. bus probe sem. + * + */ + +void ata_host_init(struct ata_host *host, struct device *dev, + unsigned long flags, const struct ata_port_operations *ops) +{ + spin_lock_init(&host->lock); + host->dev = dev; + host->flags = flags; + host->ops = ops; } /** @@ -5370,78 +5419,106 @@ err_out: */ int ata_device_add(const struct ata_probe_ent *ent) { - unsigned int count = 0, i; + unsigned int i; struct device *dev = ent->dev; - struct ata_host_set *host_set; + struct ata_host *host; int rc; DPRINTK("ENTER\n"); /* alloc a container for our list of ATA ports (buses) */ - host_set = kzalloc(sizeof(struct ata_host_set) + - (ent->n_ports * sizeof(void *)), GFP_KERNEL); - if (!host_set) + host = kzalloc(sizeof(struct ata_host) + + (ent->n_ports * sizeof(void *)), GFP_KERNEL); + if (!host) return 0; - spin_lock_init(&host_set->lock); - host_set->dev = dev; - host_set->n_ports = ent->n_ports; - host_set->irq = ent->irq; - host_set->mmio_base = ent->mmio_base; - host_set->private_data = ent->private_data; - host_set->ops = ent->port_ops; - host_set->flags = ent->host_set_flags; + ata_host_init(host, dev, ent->_host_flags, ent->port_ops); + host->n_ports = ent->n_ports; + host->irq = ent->irq; + host->irq2 = ent->irq2; + host->mmio_base = ent->mmio_base; + host->private_data = ent->private_data; /* register each port bound to this device */ - for (i = 0; i < ent->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; unsigned long xfer_mode_mask; + int irq_line = ent->irq; - ap = ata_host_add(ent, host_set, i); + ap = ata_port_add(ent, host, i); if (!ap) goto err_out; - host_set->ports[i] = ap; + host->ports[i] = ap; + + /* dummy? */ + if (ent->dummy_port_mask & (1 << i)) { + ata_port_printk(ap, KERN_INFO, "DUMMY\n"); + ap->ops = &ata_dummy_port_ops; + continue; + } + + /* start port */ + rc = ap->ops->port_start(ap); + if (rc) { + host->ports[i] = NULL; + scsi_host_put(ap->scsi_host); + goto err_out; + } + + /* Report the secondary IRQ for second channel legacy */ + if (i == 1 && ent->irq2) + irq_line = ent->irq2; + xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) | (ap->mwdma_mask << ATA_SHIFT_MWDMA) | (ap->pio_mask << ATA_SHIFT_PIO); /* print per-port info to dmesg */ ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX " - "ctl 0x%lX bmdma 0x%lX irq %lu\n", + "ctl 0x%lX bmdma 0x%lX irq %d\n", ap->flags & ATA_FLAG_SATA ? 'S' : 'P', ata_mode_string(xfer_mode_mask), ap->ioaddr.cmd_addr, ap->ioaddr.ctl_addr, ap->ioaddr.bmdma_addr, - ent->irq); + irq_line); ata_chk_status(ap); - host_set->ops->irq_clear(ap); + host->ops->irq_clear(ap); ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ - count++; } - if (!count) - goto err_free_ret; - - /* obtain irq, that is shared between channels */ + /* obtain irq, that may be shared between channels */ rc = request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, - DRV_NAME, host_set); + DRV_NAME, host); if (rc) { dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", ent->irq, rc); goto err_out; } + /* do we have a second IRQ for the other channel, eg legacy mode */ + if (ent->irq2) { + /* We will get weird core code crashes later if this is true + so trap it now */ + BUG_ON(ent->irq == ent->irq2); + + rc = request_irq(ent->irq2, ent->port_ops->irq_handler, ent->irq_flags, + DRV_NAME, host); + if (rc) { + dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", + ent->irq2, rc); + goto err_out_free_irq; + } + } + /* perform each probe synchronously */ DPRINTK("probe begin\n"); - for (i = 0; i < count; i++) { - struct ata_port *ap; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; u32 scontrol; int rc; - ap = host_set->ports[i]; - /* init sata_spd_limit to the current value */ if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { int spd = (scontrol >> 4) & 0xf; @@ -5449,7 +5526,7 @@ int ata_device_add(const struct ata_probe_ent *ent) } ap->sata_spd_limit = ap->hw_sata_spd_limit; - rc = scsi_add_host(ap->host, dev); + rc = scsi_add_host(ap->scsi_host, dev); if (rc) { ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n"); /* FIXME: do something useful here */ @@ -5497,27 +5574,29 @@ int ata_device_add(const struct ata_probe_ent *ent) /* probes are done, now scan each port's disk(s) */ DPRINTK("host probe begin\n"); - for (i = 0; i < count; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; ata_scsi_scan_host(ap); } - dev_set_drvdata(dev, host_set); + dev_set_drvdata(dev, host); VPRINTK("EXIT, returning %u\n", ent->n_ports); return ent->n_ports; /* success */ +err_out_free_irq: + free_irq(ent->irq, host); err_out: - for (i = 0; i < count; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; if (ap) { ap->ops->port_stop(ap); - scsi_host_put(ap->host); + scsi_host_put(ap->scsi_host); } } -err_free_ret: - kfree(host_set); + + kfree(host); VPRINTK("EXIT, returning 0\n"); return 0; } @@ -5577,12 +5656,12 @@ void ata_port_detach(struct ata_port *ap) skip_eh: /* remove the associated SCSI host */ - scsi_remove_host(ap->host); + scsi_remove_host(ap->scsi_host); } /** - * ata_host_set_remove - PCI layer callback for device removal - * @host_set: ATA host set that was removed + * ata_host_remove - PCI layer callback for device removal + * @host: ATA host set that was removed * * Unregister all objects associated with this host set. Free those * objects. @@ -5591,36 +5670,39 @@ void ata_port_detach(struct ata_port *ap) * Inherited from calling layer (may sleep). */ -void ata_host_set_remove(struct ata_host_set *host_set) +void ata_host_remove(struct ata_host *host) { unsigned int i; - for (i = 0; i < host_set->n_ports; i++) - ata_port_detach(host_set->ports[i]); + for (i = 0; i < host->n_ports; i++) + ata_port_detach(host->ports[i]); - free_irq(host_set->irq, host_set); + free_irq(host->irq, host); + if (host->irq2) + free_irq(host->irq2, host); - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; - ata_scsi_release(ap->host); + ata_scsi_release(ap->scsi_host); if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) { struct ata_ioports *ioaddr = &ap->ioaddr; - if (ioaddr->cmd_addr == 0x1f0) - release_region(0x1f0, 8); - else if (ioaddr->cmd_addr == 0x170) - release_region(0x170, 8); + /* FIXME: Add -ac IDE pci mods to remove these special cases */ + if (ioaddr->cmd_addr == ATA_PRIMARY_CMD) + release_region(ATA_PRIMARY_CMD, 8); + else if (ioaddr->cmd_addr == ATA_SECONDARY_CMD) + release_region(ATA_SECONDARY_CMD, 8); } - scsi_host_put(ap->host); + scsi_host_put(ap->scsi_host); } - if (host_set->ops->host_stop) - host_set->ops->host_stop(host_set); + if (host->ops->host_stop) + host->ops->host_stop(host); - kfree(host_set); + kfree(host); } /** @@ -5637,9 +5719,9 @@ void ata_host_set_remove(struct ata_host_set *host_set) * One. */ -int ata_scsi_release(struct Scsi_Host *host) +int ata_scsi_release(struct Scsi_Host *shost) { - struct ata_port *ap = ata_shost_to_port(host); + struct ata_port *ap = ata_shost_to_port(shost); DPRINTK("ENTER\n"); @@ -5650,6 +5732,31 @@ int ata_scsi_release(struct Scsi_Host *host) return 1; } +struct ata_probe_ent * +ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) +{ + struct ata_probe_ent *probe_ent; + + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) { + printk(KERN_ERR DRV_NAME "(%s): out of memory\n", + kobject_name(&(dev->kobj))); + return NULL; + } + + INIT_LIST_HEAD(&probe_ent->node); + probe_ent->dev = dev; + + probe_ent->sht = port->sht; + probe_ent->port_flags = port->flags; + probe_ent->pio_mask = port->pio_mask; + probe_ent->mwdma_mask = port->mwdma_mask; + probe_ent->udma_mask = port->udma_mask; + probe_ent->port_ops = port->port_ops; + + return probe_ent; +} + /** * ata_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized @@ -5679,11 +5786,11 @@ void ata_std_ports(struct ata_ioports *ioaddr) #ifdef CONFIG_PCI -void ata_pci_host_stop (struct ata_host_set *host_set) +void ata_pci_host_stop (struct ata_host *host) { - struct pci_dev *pdev = to_pci_dev(host_set->dev); + struct pci_dev *pdev = to_pci_dev(host->dev); - pci_iounmap(pdev, host_set->mmio_base); + pci_iounmap(pdev, host->mmio_base); } /** @@ -5703,12 +5810,9 @@ void ata_pci_host_stop (struct ata_host_set *host_set) void ata_pci_remove_one (struct pci_dev *pdev) { struct device *dev = pci_dev_to_dev(pdev); - struct ata_host_set *host_set = dev_get_drvdata(dev); - struct ata_host_set *host_set2 = host_set->next; + struct ata_host *host = dev_get_drvdata(dev); - ata_host_set_remove(host_set); - if (host_set2) - ata_host_set_remove(host_set2); + ata_host_remove(host); pci_release_regions(pdev); pci_disable_device(pdev); @@ -5749,11 +5853,11 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) return (tmp == bits->val) ? 1 : 0; } -void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state) +void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg) { pci_save_state(pdev); - if (state.event == PM_EVENT_SUSPEND) { + if (mesg.event == PM_EVENT_SUSPEND) { pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); } @@ -5767,37 +5871,26 @@ void ata_pci_device_do_resume(struct pci_dev *pdev) pci_set_master(pdev); } -int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state) +int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + struct ata_host *host = dev_get_drvdata(&pdev->dev); int rc = 0; - rc = ata_host_set_suspend(host_set, state); + rc = ata_host_suspend(host, mesg); if (rc) return rc; - if (host_set->next) { - rc = ata_host_set_suspend(host_set->next, state); - if (rc) { - ata_host_set_resume(host_set); - return rc; - } - } - - ata_pci_device_do_suspend(pdev, state); + ata_pci_device_do_suspend(pdev, mesg); return 0; } int ata_pci_device_resume(struct pci_dev *pdev) { - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + struct ata_host *host = dev_get_drvdata(&pdev->dev); ata_pci_device_do_resume(pdev); - ata_host_set_resume(host_set); - if (host_set->next) - ata_host_set_resume(host_set->next); - + ata_host_resume(host); return 0; } #endif /* CONFIG_PCI */ @@ -5897,6 +5990,39 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, } /* + * Dummy port_ops + */ +static void ata_dummy_noret(struct ata_port *ap) { } +static int ata_dummy_ret0(struct ata_port *ap) { return 0; } +static void ata_dummy_qc_noret(struct ata_queued_cmd *qc) { } + +static u8 ata_dummy_check_status(struct ata_port *ap) +{ + return ATA_DRDY; +} + +static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) +{ + return AC_ERR_SYSTEM; +} + +const struct ata_port_operations ata_dummy_port_ops = { + .port_disable = ata_port_disable, + .check_status = ata_dummy_check_status, + .check_altstatus = ata_dummy_check_status, + .dev_select = ata_noop_dev_select, + .qc_prep = ata_noop_qc_prep, + .qc_issue = ata_dummy_qc_issue, + .freeze = ata_dummy_noret, + .thaw = ata_dummy_noret, + .error_handler = ata_dummy_noret, + .post_internal_cmd = ata_dummy_qc_noret, + .irq_clear = ata_dummy_noret, + .port_start = ata_dummy_ret0, + .port_stop = ata_dummy_noret, +}; + +/* * libata is essentially a library of internal helper functions for * low-level ATA host controller drivers. As such, the API/ABI is * likely to change as new drivers are added and updated. @@ -5906,11 +6032,13 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, EXPORT_SYMBOL_GPL(sata_deb_timing_normal); EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); EXPORT_SYMBOL_GPL(sata_deb_timing_long); +EXPORT_SYMBOL_GPL(ata_dummy_port_ops); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_std_ports); +EXPORT_SYMBOL_GPL(ata_host_init); EXPORT_SYMBOL_GPL(ata_device_add); EXPORT_SYMBOL_GPL(ata_port_detach); -EXPORT_SYMBOL_GPL(ata_host_set_remove); +EXPORT_SYMBOL_GPL(ata_host_remove); EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); EXPORT_SYMBOL_GPL(ata_hsm_move); @@ -5977,8 +6105,8 @@ EXPORT_SYMBOL_GPL(sata_scr_write); EXPORT_SYMBOL_GPL(sata_scr_write_flush); EXPORT_SYMBOL_GPL(ata_port_online); EXPORT_SYMBOL_GPL(ata_port_offline); -EXPORT_SYMBOL_GPL(ata_host_set_suspend); -EXPORT_SYMBOL_GPL(ata_host_set_resume); +EXPORT_SYMBOL_GPL(ata_host_suspend); +EXPORT_SYMBOL_GPL(ata_host_resume); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_scsi_simulate); diff --git a/drivers/scsi/libata-eh.c b/drivers/ata/libata-eh.c index 29f5934..b1b5104 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -39,7 +39,7 @@ #include <scsi/scsi_eh.h> #include <scsi/scsi_device.h> #include <scsi/scsi_cmnd.h> -#include "scsi_transport_api.h" +#include "../scsi/scsi_transport_api.h" #include <linux/libata.h> @@ -200,7 +200,7 @@ void ata_scsi_error(struct Scsi_Host *host) /* synchronize with port task */ ata_port_flush_task(ap); - /* synchronize with host_set lock and sort out timeouts */ + /* synchronize with host lock and sort out timeouts */ /* For new EH, all qcs are finished in one of three ways - * normal completion, error completion, and SCSI timeout. @@ -377,7 +377,7 @@ void ata_port_wait_eh(struct ata_port *ap) spin_unlock_irqrestore(ap->lock, flags); /* make sure SCSI EH is complete */ - if (scsi_host_in_recovery(ap->host)) { + if (scsi_host_in_recovery(ap->scsi_host)) { msleep(10); goto retry; } @@ -486,7 +486,7 @@ void ata_eng_timeout(struct ata_port *ap) * other commands are drained. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_qc_schedule_eh(struct ata_queued_cmd *qc) { @@ -513,14 +513,14 @@ void ata_qc_schedule_eh(struct ata_queued_cmd *qc) * all commands are drained. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_port_schedule_eh(struct ata_port *ap) { WARN_ON(!ap->ops->error_handler); ap->pflags |= ATA_PFLAG_EH_PENDING; - scsi_schedule_eh(ap->host); + scsi_schedule_eh(ap->scsi_host); DPRINTK("port EH scheduled\n"); } @@ -532,7 +532,7 @@ void ata_port_schedule_eh(struct ata_port *ap) * Abort all active qc's of @ap and schedule EH. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Number of aborted qc's. @@ -575,7 +575,7 @@ int ata_port_abort(struct ata_port *ap) * is frozen. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void __ata_port_freeze(struct ata_port *ap) { @@ -596,7 +596,7 @@ static void __ata_port_freeze(struct ata_port *ap) * Abort and freeze @ap. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Number of aborted commands. diff --git a/drivers/scsi/libata-scsi.c b/drivers/ata/libata-scsi.c index e92c31d..3986ec8 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -321,7 +321,7 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) * current command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Command allocated, or %NULL if none available. @@ -400,7 +400,7 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf) /** * ata_scsi_device_suspend - suspend ATA device associated with sdev * @sdev: the SCSI device to suspend - * @state: target power management state + * @mesg: target power management message * * Request suspend EH action on the ATA device associated with * @sdev and wait for the operation to complete. @@ -411,7 +411,7 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf) * RETURNS: * 0 on success, -errno otherwise. */ -int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) +int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg) { struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *dev = ata_scsi_find_dev(ap, sdev); @@ -438,7 +438,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) /* request suspend */ action = ATA_EH_SUSPEND; - if (state.event != PM_EVENT_SUSPEND) + if (mesg.event != PM_EVENT_SUSPEND) action |= ATA_EH_PM_FREEZE; ap->eh_info.dev_action[dev->devno] |= action; ap->eh_info.flags |= ATA_EHI_QUIET; @@ -463,7 +463,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) spin_unlock_irqrestore(ap->lock, flags); out: if (rc == 0) - sdev->sdev_gendev.power.power_state = state; + sdev->sdev_gendev.power.power_state = mesg; return rc; } @@ -537,7 +537,7 @@ int ata_scsi_device_resume(struct scsi_device *sdev) * format sense blocks. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, u8 *ascq, int verbose) @@ -649,7 +649,7 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, * block. Clear sense key, ASC & ASCQ if there is no error. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) { @@ -918,7 +918,7 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) * [See SAT revision 5 at www.t10.org] * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, non-zero on error. @@ -986,7 +986,7 @@ invalid_fld: * FLUSH CACHE EXT. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, non-zero on error. @@ -1109,7 +1109,7 @@ static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) * Converts SCSI VERIFY command to an ATA READ VERIFY command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, non-zero on error. @@ -1233,7 +1233,7 @@ nothing_to_do: * %WRITE_16 are currently supported. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, non-zero on error. @@ -1467,7 +1467,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * issued to @dev. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * 1 if deferring is needed, 0 otherwise. @@ -1510,7 +1510,7 @@ static int ata_scmd_need_defer(struct ata_device *dev, int is_io) * termination. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command @@ -1589,7 +1589,7 @@ defer: * Maps buffer contained within SCSI command @cmd. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Length of response buffer. @@ -1623,7 +1623,7 @@ static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out) * Unmaps response buffer contained within @cmd. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) @@ -1649,7 +1649,7 @@ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) * and sense buffer are assumed to be set). * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, @@ -1680,7 +1680,7 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, * with non-VPD INQUIRY command output. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, @@ -1736,7 +1736,7 @@ unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, * Returns list of inquiry VPD pages available. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, @@ -1764,7 +1764,7 @@ unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, * Returns ATA device serial number. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, @@ -1797,7 +1797,7 @@ unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, * name ("ATA "), model and serial numbers. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, @@ -1849,7 +1849,7 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, * that the caller should successfully complete this SCSI command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf, @@ -1990,7 +1990,7 @@ static int ata_dev_supports_fua(u16 *id) * descriptor for other device types. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, @@ -2129,7 +2129,7 @@ saving_not_supp: * Simulate READ CAPACITY commands. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, @@ -2204,7 +2204,7 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, * Simulate REPORT LUNS command. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, @@ -2256,7 +2256,7 @@ void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) * and the specified additional sense codes. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) @@ -2421,7 +2421,7 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) * @scsicmd: SCSI CDB associated with this PACKET command * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Zero on success, non-zero on failure. @@ -2500,7 +2500,7 @@ static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, * Determine if commands should be sent to the specified device. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * 0 if commands are not allowed / 1 if commands are allowed @@ -2534,7 +2534,7 @@ static int ata_scsi_dev_enabled(struct ata_device *dev) * SCSI command to be sent. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * Associated ATA device, or %NULL if not found. @@ -2808,7 +2808,7 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, * ATA and ATAPI devices appearing as SCSI devices. * * LOCKING: - * Releases scsi-layer-held lock, and obtains host_set lock. + * Releases scsi-layer-held lock, and obtains host lock. * * RETURNS: * Return value from __ata_scsi_queuecmd() if @cmd can be queued, @@ -2852,7 +2852,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) * that can be handled internally. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, @@ -2944,7 +2944,7 @@ void ata_scsi_scan_host(struct ata_port *ap) if (!ata_dev_enabled(dev) || dev->sdev) continue; - sdev = __scsi_add_device(ap->host, 0, i, 0, NULL); + sdev = __scsi_add_device(ap->scsi_host, 0, i, 0, NULL); if (!IS_ERR(sdev)) { dev->sdev = sdev; scsi_device_put(sdev); @@ -2958,11 +2958,11 @@ void ata_scsi_scan_host(struct ata_port *ap) * * This function is called from ata_eh_hotplug() and responsible * for taking the SCSI device attached to @dev offline. This - * function is called with host_set lock which protects dev->sdev + * function is called with host lock which protects dev->sdev * against clearing. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) * * RETURNS: * 1 if attached SCSI device exists, 0 otherwise. @@ -2998,16 +2998,16 @@ static void ata_scsi_remove_dev(struct ata_device *dev) * be removed if there is __scsi_device_get() interface which * increments reference counts regardless of device state. */ - mutex_lock(&ap->host->scan_mutex); + mutex_lock(&ap->scsi_host->scan_mutex); spin_lock_irqsave(ap->lock, flags); - /* clearing dev->sdev is protected by host_set lock */ + /* clearing dev->sdev is protected by host lock */ sdev = dev->sdev; dev->sdev = NULL; if (sdev) { /* If user initiated unplug races with us, sdev can go - * away underneath us after the host_set lock and + * away underneath us after the host lock and * scan_mutex are released. Hold onto it. */ if (scsi_device_get(sdev) == 0) { @@ -3024,7 +3024,7 @@ static void ata_scsi_remove_dev(struct ata_device *dev) } spin_unlock_irqrestore(ap->lock, flags); - mutex_unlock(&ap->host->scan_mutex); + mutex_unlock(&ap->scsi_host->scan_mutex); if (sdev) { ata_dev_printk(dev, KERN_INFO, "detaching (SCSI %s)\n", @@ -3171,3 +3171,152 @@ void ata_scsi_dev_rescan(void *data) scsi_rescan_device(&(dev->sdev->sdev_gendev)); } } + +/** + * ata_sas_port_alloc - Allocate port for a SAS attached SATA device + * @pdev: PCI device that the scsi device is attached to + * @port_info: Information from low-level host driver + * @shost: SCSI host that the scsi device is attached to + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * ata_port pointer on success / NULL on failure. + */ + +struct ata_port *ata_sas_port_alloc(struct ata_host *host, + struct ata_port_info *port_info, + struct Scsi_Host *shost) +{ + struct ata_port *ap = kzalloc(sizeof(*ap), GFP_KERNEL); + struct ata_probe_ent *ent; + + if (!ap) + return NULL; + + ent = ata_probe_ent_alloc(host->dev, port_info); + if (!ent) { + kfree(ap); + return NULL; + } + + ata_port_init(ap, host, ent, 0); + ap->lock = shost->host_lock; + kfree(ent); + return ap; +} +EXPORT_SYMBOL_GPL(ata_sas_port_alloc); + +/** + * ata_sas_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates DMA pad. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +int ata_sas_port_start(struct ata_port *ap) +{ + return ata_pad_alloc(ap, ap->dev); +} +EXPORT_SYMBOL_GPL(ata_sas_port_start); + +/** + * ata_port_stop - Undo ata_sas_port_start() + * @ap: Port to shut down + * + * Frees the DMA pad. + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_sas_port_stop(struct ata_port *ap) +{ + ata_pad_free(ap, ap->dev); +} +EXPORT_SYMBOL_GPL(ata_sas_port_stop); + +/** + * ata_sas_port_init - Initialize a SATA device + * @ap: SATA port to initialize + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +int ata_sas_port_init(struct ata_port *ap) +{ + int rc = ap->ops->port_start(ap); + + if (!rc) + rc = ata_bus_probe(ap); + + return rc; +} +EXPORT_SYMBOL_GPL(ata_sas_port_init); + +/** + * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc + * @ap: SATA port to destroy + * + */ + +void ata_sas_port_destroy(struct ata_port *ap) +{ + ap->ops->port_stop(ap); + kfree(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_port_destroy); + +/** + * ata_sas_slave_configure - Default slave_config routine for libata devices + * @sdev: SCSI device to configure + * @ap: ATA port to which SCSI device is attached + * + * RETURNS: + * Zero. + */ + +int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap) +{ + ata_scsi_sdev_config(sdev); + ata_scsi_dev_config(sdev, ap->device); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_slave_configure); + +/** + * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device + * @cmd: SCSI command to be sent + * @done: Completion function, called when command is complete + * @ap: ATA port to which the command is being sent + * + * RETURNS: + * Zero. + */ + +int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), + struct ata_port *ap) +{ + ata_scsi_dump_cdb(ap, cmd); + + if (likely(ata_scsi_dev_enabled(ap->device))) + __ata_scsi_queuecmd(cmd, done, ap->device); + else { + cmd->result = (DID_BAD_TARGET << 16); + done(cmd); + } + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_queuecmd); diff --git a/drivers/scsi/libata-bmdma.c b/drivers/ata/libata-sff.c index 9ce221f..7605028 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/ata/libata-sff.c @@ -193,7 +193,7 @@ void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) * synchronization with interrupt handler / other threads. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) @@ -216,7 +216,7 @@ static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile * FIXME: missing write posting for 400nS delay enforcement * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) @@ -237,7 +237,7 @@ static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile * synchronization with interrupt handler / other threads. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) { @@ -422,7 +422,7 @@ u8 ata_altstatus(struct ata_port *ap) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) @@ -452,7 +452,7 @@ static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc) @@ -483,7 +483,7 @@ static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc) @@ -511,7 +511,7 @@ static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) @@ -535,7 +535,7 @@ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) * May be used as the bmdma_start() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_bmdma_start(struct ata_queued_cmd *qc) { @@ -557,7 +557,7 @@ void ata_bmdma_start(struct ata_queued_cmd *qc) * May be used as the bmdma_setup() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_bmdma_setup(struct ata_queued_cmd *qc) { @@ -577,7 +577,7 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc) * May be used as the irq_clear() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_bmdma_irq_clear(struct ata_port *ap) @@ -605,7 +605,7 @@ void ata_bmdma_irq_clear(struct ata_port *ap) * May be used as the bmdma_status() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ u8 ata_bmdma_status(struct ata_port *ap) @@ -629,7 +629,7 @@ u8 ata_bmdma_status(struct ata_port *ap) * May be used as the bmdma_stop() entry in ata_port_operations. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ void ata_bmdma_stop(struct ata_queued_cmd *qc) @@ -797,32 +797,6 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) } #ifdef CONFIG_PCI -static struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - kobject_name(&(dev->kobj))); - return NULL; - } - - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = dev; - - probe_ent->sht = port->sht; - probe_ent->host_flags = port->host_flags; - probe_ent->pio_mask = port->pio_mask; - probe_ent->mwdma_mask = port->mwdma_mask; - probe_ent->udma_mask = port->udma_mask; - probe_ent->port_ops = port->port_ops; - - return probe_ent; -} - - /** * ata_pci_init_native_mode - Initialize native-mode driver * @pdev: pci device to be initialized @@ -864,7 +838,7 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int bmdma = pci_resource_start(pdev, 4); if (bmdma) { if (inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; probe_ent->port[p].bmdma_addr = bmdma; } ata_std_ports(&probe_ent->port[p]); @@ -880,7 +854,7 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int if (bmdma) { bmdma += 8; if(inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; probe_ent->port[p].bmdma_addr = bmdma; } ata_std_ports(&probe_ent->port[p]); @@ -893,44 +867,48 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, - struct ata_port_info *port, int port_num) + struct ata_port_info **port, int port_mask) { struct ata_probe_ent *probe_ent; - unsigned long bmdma; + unsigned long bmdma = pci_resource_start(pdev, 4); - probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port); + probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); if (!probe_ent) return NULL; - probe_ent->legacy_mode = 1; - probe_ent->n_ports = 1; - probe_ent->hard_port_no = port_num; - probe_ent->private_data = port->private_data; - - switch(port_num) - { - case 0: - probe_ent->irq = 14; - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - break; - case 1: - probe_ent->irq = 15; - probe_ent->port[0].cmd_addr = 0x170; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x376; - break; - } + probe_ent->n_ports = 2; + probe_ent->private_data = port[0]->private_data; - bmdma = pci_resource_start(pdev, 4); - if (bmdma != 0) { - bmdma += 8 * port_num; - probe_ent->port[0].bmdma_addr = bmdma; - if (inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - } - ata_std_ports(&probe_ent->port[0]); + if (port_mask & ATA_PORT_PRIMARY) { + probe_ent->irq = 14; + probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL; + if (bmdma) { + probe_ent->port[0].bmdma_addr = bmdma; + if (inb(bmdma + 2) & 0x80) + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; + } + ata_std_ports(&probe_ent->port[0]); + } else + probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY; + + if (port_mask & ATA_PORT_SECONDARY) { + if (probe_ent->irq) + probe_ent->irq2 = 15; + else + probe_ent->irq = 15; + probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD; + probe_ent->port[1].altstatus_addr = + probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL; + if (bmdma) { + probe_ent->port[1].bmdma_addr = bmdma + 8; + if (inb(bmdma + 10) & 0x80) + probe_ent->_host_flags |= ATA_HOST_SIMPLEX; + } + ata_std_ports(&probe_ent->port[1]); + } else + probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY; return probe_ent; } @@ -950,6 +928,10 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, * regions, sets the dma mask, enables bus master mode, and calls * ata_device_add() * + * ASSUMPTION: + * Nobody makes a single channel controller that appears solely as + * the secondary legacy port on PCI. + * * LOCKING: * Inherited from PCI layer (may sleep). * @@ -960,7 +942,7 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports) { - struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; + struct ata_probe_ent *probe_ent = NULL; struct ata_port_info *port[2]; u8 tmp8, mask; unsigned int legacy_mode = 0; @@ -975,7 +957,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, else port[1] = port[0]; - if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 + if ((port[0]->flags & ATA_FLAG_NO_LEGACY) == 0 && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { /* TODO: What if one channel is in native mode ... */ pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); @@ -1009,35 +991,34 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out; } - /* FIXME: Should use platform specific mappers for legacy port ranges */ if (legacy_mode) { - if (!request_region(0x1f0, 8, "libata")) { + if (!request_region(ATA_PRIMARY_CMD, 8, "libata")) { struct resource *conflict, res; - res.start = 0x1f0; - res.end = 0x1f0 + 8 - 1; + res.start = ATA_PRIMARY_CMD; + res.end = ATA_PRIMARY_CMD + 8 - 1; conflict = ____request_resource(&ioport_resource, &res); if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 0); + legacy_mode |= ATA_PORT_PRIMARY; else { disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n"); + printk(KERN_WARNING "ata: 0x%0X IDE port busy\n", ATA_PRIMARY_CMD); } } else - legacy_mode |= (1 << 0); + legacy_mode |= ATA_PORT_PRIMARY; - if (!request_region(0x170, 8, "libata")) { + if (!request_region(ATA_SECONDARY_CMD, 8, "libata")) { struct resource *conflict, res; - res.start = 0x170; - res.end = 0x170 + 8 - 1; + res.start = ATA_SECONDARY_CMD; + res.end = ATA_SECONDARY_CMD + 8 - 1; conflict = ____request_resource(&ioport_resource, &res); if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 1); + legacy_mode |= ATA_PORT_SECONDARY; else { disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x170 IDE port busy\n"); + printk(KERN_WARNING "ata: 0x%X IDE port busy\n", ATA_SECONDARY_CMD); } } else - legacy_mode |= (1 << 1); + legacy_mode |= ATA_PORT_SECONDARY; } /* we have legacy mode, but all ports are unavailable */ @@ -1055,17 +1036,14 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out_regions; if (legacy_mode) { - if (legacy_mode & (1 << 0)) - probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0); - if (legacy_mode & (1 << 1)) - probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1); + probe_ent = ata_pci_init_legacy_port(pdev, port, legacy_mode); } else { if (n_ports == 2) probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); else probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); } - if (!probe_ent && !probe_ent2) { + if (!probe_ent) { rc = -ENOMEM; goto err_out_regions; } @@ -1073,35 +1051,17 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, pci_set_master(pdev); /* FIXME: check ata_device_add return */ - if (legacy_mode) { - struct device *dev = &pdev->dev; - struct ata_host_set *host_set = NULL; - - if (legacy_mode & (1 << 0)) { - ata_device_add(probe_ent); - host_set = dev_get_drvdata(dev); - } - - if (legacy_mode & (1 << 1)) { - ata_device_add(probe_ent2); - if (host_set) { - host_set->next = dev_get_drvdata(dev); - dev_set_drvdata(dev, host_set); - } - } - } else - ata_device_add(probe_ent); + ata_device_add(probe_ent); kfree(probe_ent); - kfree(probe_ent2); return 0; err_out_regions: - if (legacy_mode & (1 << 0)) - release_region(0x1f0, 8); - if (legacy_mode & (1 << 1)) - release_region(0x170, 8); + if (legacy_mode & ATA_PORT_PRIMARY) + release_region(ATA_PRIMARY_CMD, 8); + if (legacy_mode & ATA_PORT_SECONDARY) + release_region(ATA_SECONDARY_CMD, 8); pci_release_regions(pdev); err_out: if (disable_dev_on_err) diff --git a/drivers/scsi/libata.h b/drivers/ata/libata.h index c325679..a5ecb71 100644 --- a/drivers/scsi/libata.h +++ b/drivers/ata/libata.h @@ -69,6 +69,10 @@ extern int ata_flush_cache(struct ata_device *dev); extern void ata_dev_init(struct ata_device *dev); extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); +extern void ata_port_init(struct ata_port *ap, struct ata_host *host, + const struct ata_probe_ent *ent, unsigned int port_no); +extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev, + const struct ata_port_info *port); /* libata-scsi.c */ @@ -107,6 +111,7 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); extern void ata_scsi_dev_rescan(void *data); +extern int ata_bus_probe(struct ata_port *ap); /* libata-eh.c */ extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c new file mode 100644 index 0000000..8448ee6 --- /dev/null +++ b/drivers/ata/pata_ali.c @@ -0,0 +1,679 @@ +/* + * pata_ali.c - ALI 15x3 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * based in part upon + * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02 + * + * Copyright (C) 1998-2000 Michel Aubry, Maintainer + * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer + * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer + * + * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) + * May be copied or modified under the terms of the GNU General Public License + * Copyright (C) 2002 Alan Cox <alan@redhat.com> + * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> + * + * Documentation + * Chipset documentation available under NDA only + * + * TODO/CHECK + * Cannot have ATAPI on both master & slave for rev < c2 (???) but + * otherwise should do atapi DMA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/dmi.h> + +#define DRV_NAME "pata_ali" +#define DRV_VERSION "0.6.5" + +/* + * Cable special cases + */ + +static struct dmi_system_id cable_dmi_table[] = { + { + .ident = "HP Pavilion N5430", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_BOARD_NAME, "OmniBook N32N-736"), + }, + }, + { } +}; + +static int ali_cable_override(struct pci_dev *pdev) +{ + /* Fujitsu P2000 */ + if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF) + return 1; + /* Systems by DMI */ + if (dmi_check_system(cable_dmi_table)) + return 1; + return 0; +} + +/** + * ali_c2_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection for C2 and later revisions + */ + +static int ali_c2_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + + /* Certain laptops use short but suitable cables and don't + implement the detect logic */ + + if (ali_cable_override(pdev)) + return ATA_CBL_PATA80; + + /* Host view cable detect 0x4A bit 0 primary bit 1 secondary + Bit set for 40 pin */ + pci_read_config_byte(pdev, 0x4A, &ata66); + if (ata66 & (1 << ap->port_no)) + return ATA_CBL_PATA40; + else + return ATA_CBL_PATA80; +} + +/** + * ali_early_error_handler - reset for eary chip + * @ap: ATA port + * + * Handle the reset callback for the later chips with cable detect + */ + +static int ali_c2_pre_reset(struct ata_port *ap) +{ + ap->cbl = ali_c2_cable_detect(ap); + return ata_std_prereset(ap); +} + +static void ali_c2_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ali_c2_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * ali_early_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection for older chipsets. This turns out to be + * rather easy to implement + */ + +static int ali_early_cable_detect(struct ata_port *ap) +{ + return ATA_CBL_PATA40; +} + +/** + * ali_early_probe_init - reset for early chip + * @ap: ATA port + * + * Handle the reset callback for the early (pre cable detect) chips. + */ + +static int ali_early_pre_reset(struct ata_port *ap) +{ + ap->cbl = ali_early_cable_detect(ap); + return ata_std_prereset(ap); +} + +static void ali_early_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, ali_early_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * ali_20_filter - filter for earlier ALI DMA + * @ap: ALi ATA port + * @adev: attached device + * + * Ensure that we do not do DMA on CD devices. We may be able to + * fix that later on. Also ensure we do not do UDMA on WDC drives + */ + +static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + char model_num[40]; + /* No DMA on anything but a disk for now */ + if (adev->class != ATA_DEV_ATA) + mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); + if (strstr(model_num, "WDC")) + return mask &= ~ATA_MASK_UDMA; + return ata_pci_default_filter(ap, adev, mask); +} + +/** + * ali_fifo_control - FIFO manager + * @ap: ALi channel to control + * @adev: device for FIFO control + * @on: 0 for off 1 for on + * + * Enable or disable the FIFO on a given device. Because of the way the + * ALi FIFO works it provides a boost on ATA disk but can be confused by + * ATAPI and we must therefore manage it. + */ + +static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int on) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int pio_fifo = 0x54 + ap->port_no; + u8 fifo; + int shift = 4 * adev->devno; + + /* ATA - FIFO on set nibble to 0x05, ATAPI - FIFO off, set nibble to + 0x00. Not all the docs agree but the behaviour we now use is the + one stated in the BIOS Programming Guide */ + + pci_read_config_byte(pdev, pio_fifo, &fifo); + fifo &= ~(0x0F << shift); + if (on) + fifo |= (on << shift); + pci_write_config_byte(pdev, pio_fifo, fifo); +} + +/** + * ali_program_modes - load mode registers + * @ap: ALi channel to load + * @adev: Device the timing is for + * @cmd: Command timing + * @data: Data timing + * @ultra: UDMA timing or zero for off + * + * Loads the timing registers for cmd/data and disable UDMA if + * ultra is zero. If ultra is set then load and enable the UDMA + * timing but do not touch the command/data timing. + */ + +static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, struct ata_timing *t, u8 ultra) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int cas = 0x58 + 4 * ap->port_no; /* Command timing */ + int cbt = 0x59 + 4 * ap->port_no; /* Command timing */ + int drwt = 0x5A + 4 * ap->port_no + adev->devno; /* R/W timing */ + int udmat = 0x56 + ap->port_no; /* UDMA timing */ + int shift = 4 * adev->devno; + u8 udma; + + if (t != NULL) { + t->setup = FIT(t->setup, 1, 8) & 7; + t->act8b = FIT(t->act8b, 1, 8) & 7; + t->rec8b = FIT(t->rec8b, 1, 16) & 15; + t->active = FIT(t->active, 1, 8) & 7; + t->recover = FIT(t->recover, 1, 16) & 15; + + pci_write_config_byte(pdev, cas, t->setup); + pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b); + pci_write_config_byte(pdev, drwt, (t->active << 4) | t->recover); + } + + /* Set up the UDMA enable */ + pci_read_config_byte(pdev, udmat, &udma); + udma &= ~(0x0F << shift); + udma |= ultra << shift; + pci_write_config_byte(pdev, udmat, udma); +} + +/** + * ali_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the ALi registers for PIO mode. FIXME: add timings for + * PIO5. + */ + +static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_device *pair = ata_dev_pair(adev); + struct ata_timing t; + unsigned long T = 1000000000 / 33333; /* PCI clock based */ + + ata_timing_compute(adev, adev->pio_mode, &t, T, 1); + if (pair) { + struct ata_timing p; + ata_timing_compute(pair, pair->pio_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + if (pair->dma_mode) { + ata_timing_compute(pair, pair->dma_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + } + } + + /* PIO FIFO is only permitted on ATA disk */ + if (adev->class != ATA_DEV_ATA) + ali_fifo_control(ap, adev, 0x00); + ali_program_modes(ap, adev, &t, 0); + if (adev->class == ATA_DEV_ATA) + ali_fifo_control(ap, adev, 0x05); + +} + +/** + * ali_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * FIXME: MWDMA timings + */ + +static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD }; + struct ata_device *pair = ata_dev_pair(adev); + struct ata_timing t; + unsigned long T = 1000000000 / 33333; /* PCI clock based */ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + + if (adev->class == ATA_DEV_ATA) + ali_fifo_control(ap, adev, 0x08); + + if (adev->dma_mode >= XFER_UDMA_0) { + ali_program_modes(ap, adev, NULL, udma_timing[adev->dma_mode - XFER_UDMA_0]); + if (adev->dma_mode >= XFER_UDMA_3) { + u8 reg4b; + pci_read_config_byte(pdev, 0x4B, ®4b); + reg4b |= 1; + pci_write_config_byte(pdev, 0x4B, reg4b); + } + } else { + ata_timing_compute(adev, adev->dma_mode, &t, T, 1); + if (pair) { + struct ata_timing p; + ata_timing_compute(pair, pair->pio_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + if (pair->dma_mode) { + ata_timing_compute(pair, pair->dma_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); + } + } + ali_program_modes(ap, adev, &t, 0); + } +} + +/** + * ali_lock_sectors - Keep older devices to 255 sector mode + * @ap: ATA port + * @adev: Device + * + * Called during the bus probe for each device that is found. We use + * this call to lock the sector count of the device to 255 or less on + * older ALi controllers. If we didn't do this then large I/O's would + * require LBA48 commands which the older ALi requires are issued by + * slower PIO methods + */ + +static void ali_lock_sectors(struct ata_port *ap, struct ata_device *adev) +{ + adev->max_sectors = 255; +} + +static struct scsi_host_template ali_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + /* Keep LBA28 counts so large I/O's don't turn LBA48 and PIO + with older controllers. Not locked so will grow on C5 or later */ + .max_sectors = 255, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +/* + * Port operations for PIO only ALi + */ + +static struct ata_port_operations ali_early_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = ali_set_piomode, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ali_early_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Port operations for DMA capable ALi without cable + * detect + */ +static struct ata_port_operations ali_20_port_ops = { + .port_disable = ata_port_disable, + + .set_piomode = ali_set_piomode, + .set_dmamode = ali_set_dmamode, + .mode_filter = ali_20_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .dev_config = ali_lock_sectors, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ali_early_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Port operations for DMA capable ALi with cable detect + */ +static struct ata_port_operations ali_c2_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = ali_set_piomode, + .set_dmamode = ali_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .dev_config = ali_lock_sectors, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ali_c2_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Port operations for DMA capable ALi with cable detect and LBA48 + */ +static struct ata_port_operations ali_c5_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = ali_set_piomode, + .set_dmamode = ali_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ali_c2_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * ali_init_one - discovery callback + * @pdev: PCI device ID + * @id: PCI table info + * + * An ALi IDE interface has been discovered. Figure out what revision + * and perform configuration work before handing it to the ATA layer + */ + +static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info_early = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &ali_early_port_ops + }; + /* Revision 0x20 added DMA */ + static struct ata_port_info info_20 = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &ali_20_port_ops + }; + /* Revision 0x20 with support logic added UDMA */ + static struct ata_port_info info_20_udma = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, /* UDMA33 */ + .port_ops = &ali_20_port_ops + }; + /* Revision 0xC2 adds UDMA66 */ + static struct ata_port_info info_c2 = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, + .port_ops = &ali_c2_port_ops + }; + /* Revision 0xC3 is UDMA100 */ + static struct ata_port_info info_c3 = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &ali_c2_port_ops + }; + /* Revision 0xC4 is UDMA133 */ + static struct ata_port_info info_c4 = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &ali_c2_port_ops + }; + /* Revision 0xC5 is UDMA133 with LBA48 DMA */ + static struct ata_port_info info_c5 = { + .sht = &ali_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &ali_c5_port_ops + }; + + static struct ata_port_info *port_info[2]; + u8 rev, tmp; + struct pci_dev *north, *isa_bridge; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + + /* + * The chipset revision selects the driver operations and + * mode data. + */ + + if (rev < 0x20) { + port_info[0] = port_info[1] = &info_early; + } else if (rev < 0xC2) { + /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */ + pci_read_config_byte(pdev, 0x4B, &tmp); + /* Clear CD-ROM DMA write bit */ + tmp &= 0x7F; + pci_write_config_byte(pdev, 0x4B, tmp); + port_info[0] = port_info[1] = &info_20; + } else if (rev == 0xC2) { + port_info[0] = port_info[1] = &info_c2; + } else if (rev == 0xC3) { + port_info[0] = port_info[1] = &info_c3; + } else if (rev == 0xC4) { + port_info[0] = port_info[1] = &info_c4; + } else + port_info[0] = port_info[1] = &info_c5; + + if (rev >= 0xC2) { + /* Enable cable detection logic */ + pci_read_config_byte(pdev, 0x4B, &tmp); + pci_write_config_byte(pdev, 0x4B, tmp | 0x08); + } + + north = pci_get_slot(pdev->bus, PCI_DEVFN(0,0)); + isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); + + if (north && north->vendor == PCI_VENDOR_ID_AL) { + /* Configure the ALi bridge logic. For non ALi rely on BIOS. + Set the south bridge enable bit */ + pci_read_config_byte(isa_bridge, 0x79, &tmp); + if (rev == 0xC2) + pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04); + else if (rev > 0xC2) + pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02); + } + + if (rev >= 0x20) { + if (rev < 0xC2) { + /* Are we paired with a UDMA capable chip */ + pci_read_config_byte(isa_bridge, 0x5E, &tmp); + if ((tmp & 0x1E) == 0x12) + port_info[0] = port_info[1] = &info_20_udma; + } + /* + * CD_ROM DMA on (0x53 bit 0). Enable this even if we want + * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control + * via 0x54/55. + */ + pci_read_config_byte(pdev, 0x53, &tmp); + if (rev <= 0x20) + tmp &= ~0x02; + if (rev == 0xc7) + tmp |= 0x03; + else + tmp |= 0x01; /* CD_ROM enable for DMA */ + pci_write_config_byte(pdev, 0x53, tmp); + } + + pci_dev_put(isa_bridge); + pci_dev_put(north); + + ata_pci_clear_simplex(pdev); + return ata_pci_init_one(pdev, port_info, 2); +} + +static struct pci_device_id ali[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5228), }, + { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229), }, + { 0, }, +}; + +static struct pci_driver ali_pci_driver = { + .name = DRV_NAME, + .id_table = ali, + .probe = ali_init_one, + .remove = ata_pci_remove_one +}; + +static int __init ali_init(void) +{ + return pci_register_driver(&ali_pci_driver); +} + + +static void __exit ali_exit(void) +{ + pci_unregister_driver(&ali_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ALi PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ali); +MODULE_VERSION(DRV_VERSION); + +module_init(ali_init); +module_exit(ali_exit); diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c new file mode 100644 index 0000000..3293cf9 --- /dev/null +++ b/drivers/ata/pata_amd.c @@ -0,0 +1,718 @@ +/* + * pata_amd.c - AMD PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * Based on pata-sil680. Errata information is taken from data sheets + * and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are + * claimed by sata-nv.c. + * + * TODO: + * Variable system clock when/if it makes sense + * Power management on ports + * + * + * Documentation publically available. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_amd" +#define DRV_VERSION "0.2.3" + +/** + * timing_setup - shared timing computation and load + * @ap: ATA port being set up + * @adev: drive being configured + * @offset: port offset + * @speed: target speed + * @clock: clock multiplier (number of times 33MHz for this part) + * + * Perform the actual timing set up for Nvidia or AMD PATA devices. + * The actual devices vary so they all call into this helper function + * providing the clock multipler and offset (because AMD and Nvidia put + * the ports at different locations). + */ + +static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offset, int speed, int clock) +{ + static const unsigned char amd_cyc2udma[] = { + 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_device *peer = ata_dev_pair(adev); + int dn = ap->port_no * 2 + adev->devno; + struct ata_timing at, apeer; + int T, UT; + const int amd_clock = 33333; /* KHz. */ + u8 t; + + T = 1000000000 / amd_clock; + UT = T / min_t(int, max_t(int, clock, 1), 2); + + if (ata_timing_compute(adev, speed, &at, T, UT) < 0) { + dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", speed); + return; + } + + if (peer) { + /* This may be over conservative */ + if (peer->dma_mode) { + ata_timing_compute(peer, peer->dma_mode, &apeer, T, UT); + ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT); + } + ata_timing_compute(peer, peer->pio_mode, &apeer, T, UT); + ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT); + } + + if (speed == XFER_UDMA_5 && amd_clock <= 33333) at.udma = 1; + if (speed == XFER_UDMA_6 && amd_clock <= 33333) at.udma = 15; + + /* + * Now do the setup work + */ + + /* Configure the address set up timing */ + pci_read_config_byte(pdev, offset + 0x0C, &t); + t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1)); + pci_write_config_byte(pdev, offset + 0x0C , t); + + /* Configure the 8bit I/O timing */ + pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)), + ((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1)); + + /* Drive timing */ + pci_write_config_byte(pdev, offset + 0x08 + (3 - dn), + ((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1)); + + switch (clock) { + case 1: + t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03; + break; + + case 2: + t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03; + break; + + case 3: + t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03; + break; + + case 4: + t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03; + break; + + default: + return; + } + + /* UDMA timing */ + pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t); +} + +/** + * amd_probe_init - cable detection + * @ap: ATA port + * + * Perform cable detection. The BIOS stores this in PCI config + * space for us. + */ + +static int amd_pre_reset(struct ata_port *ap) +{ + static const u32 bitmask[2] = {0x03, 0xC0}; + static const struct pci_bits amd_enable_bits[] = { + { 0x40, 1, 0x02, 0x02 }, + { 0x40, 1, 0x01, 0x01 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + + if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + + pci_read_config_byte(pdev, 0x42, &ata66); + if (ata66 & bitmask[ap->port_no]) + ap->cbl = ATA_CBL_PATA80; + else + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); + +} + +static void amd_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, amd_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +static int amd_early_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static struct pci_bits amd_enable_bits[] = { + { 0x40, 1, 0x02, 0x02 }, + { 0x40, 1, 0x01, 0x01 } + }; + + if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + /* No host side cable detection */ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); + +} + +static void amd_early_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, amd_early_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * amd33_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the AMD registers for PIO mode. + */ + +static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->pio_mode, 1); +} + +static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->pio_mode, 2); +} + +static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->pio_mode, 3); +} + +static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->pio_mode, 4); +} + +/** + * amd33_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the AMD and Nvidia + * chipset. + */ + +static void amd33_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 1); +} + +static void amd66_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 2); +} + +static void amd100_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 3); +} + +static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x40, adev->dma_mode, 4); +} + + +/** + * nv_probe_init - cable detection + * @ap: ATA port + * + * Perform cable detection. The BIOS stores this in PCI config + * space for us. + */ + +static int nv_pre_reset(struct ata_port *ap) { + static const u8 bitmask[2] = {0x03, 0xC0}; + static const struct pci_bits nv_enable_bits[] = { + { 0x50, 1, 0x02, 0x02 }, + { 0x50, 1, 0x01, 0x01 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + u16 udma; + + if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + + + pci_read_config_byte(pdev, 0x52, &ata66); + if (ata66 & bitmask[ap->port_no]) + ap->cbl = ATA_CBL_PATA80; + else + ap->cbl = ATA_CBL_PATA40; + + /* We now have to double check because the Nvidia boxes BIOS + doesn't always set the cable bits but does set mode bits */ + + pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma); + if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400) + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +static void nv_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, nv_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} +/** + * nv100_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the AMD registers for PIO mode. + */ + +static void nv100_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->pio_mode, 3); +} + +static void nv133_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->pio_mode, 4); +} + +/** + * nv100_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the AMD and Nvidia + * chipset. + */ + +static void nv100_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->dma_mode, 3); +} + +static void nv133_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + timing_setup(ap, adev, 0x50, adev->dma_mode, 4); +} + +static struct scsi_host_template amd_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations amd33_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = amd33_set_piomode, + .set_dmamode = amd33_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = amd_early_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations amd66_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = amd66_set_piomode, + .set_dmamode = amd66_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = amd_early_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations amd100_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = amd100_set_piomode, + .set_dmamode = amd100_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = amd_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations amd133_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = amd133_set_piomode, + .set_dmamode = amd133_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = amd_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations nv100_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = nv100_set_piomode, + .set_dmamode = nv100_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations nv133_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = nv133_set_piomode, + .set_dmamode = nv133_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info[10] = { + { /* 0: AMD 7401 */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, /* No SWDMA */ + .udma_mask = 0x07, /* UDMA 33 */ + .port_ops = &amd33_port_ops + }, + { /* 1: Early AMD7409 - no swdma */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, /* UDMA 66 */ + .port_ops = &amd66_port_ops + }, + { /* 2: AMD 7409, no swdma errata */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, /* UDMA 66 */ + .port_ops = &amd66_port_ops + }, + { /* 3: AMD 7411 */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, /* UDMA 100 */ + .port_ops = &amd100_port_ops + }, + { /* 4: AMD 7441 */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, /* UDMA 100 */ + .port_ops = &amd100_port_ops + }, + { /* 5: AMD 8111*/ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, /* UDMA 133, no swdma */ + .port_ops = &amd133_port_ops + }, + { /* 6: AMD 8111 UDMA 100 (Serenade) */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, /* UDMA 100, no swdma */ + .port_ops = &amd133_port_ops + }, + { /* 7: Nvidia Nforce */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, /* UDMA 100 */ + .port_ops = &nv100_port_ops + }, + { /* 8: Nvidia Nforce2 and later */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, /* UDMA 133, no swdma */ + .port_ops = &nv133_port_ops + }, + { /* 9: AMD CS5536 (Geode companion) */ + .sht = &amd_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, /* UDMA 100 */ + .port_ops = &amd100_port_ops + } + }; + static struct ata_port_info *port_info[2]; + static int printed_version; + int type = id->driver_data; + u8 rev; + u8 fifo; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + pci_read_config_byte(pdev, 0x41, &fifo); + + /* Check for AMD7409 without swdma errata and if found adjust type */ + if (type == 1 && rev > 0x7) + type = 2; + + /* Check for AMD7411 */ + if (type == 3) + /* FIFO is broken */ + pci_write_config_byte(pdev, 0x41, fifo & 0x0F); + else + pci_write_config_byte(pdev, 0x41, fifo | 0xF0); + + /* Serenade ? */ + if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD && + pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) + type = 6; /* UDMA 100 only */ + + if (type < 3) + ata_pci_clear_simplex(pdev); + + /* And fire it up */ + + port_info[0] = port_info[1] = &info[type]; + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id amd[] = { + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_COBRA_7401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7409, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7411, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 }, + { 0, }, +}; + +static struct pci_driver amd_pci_driver = { + .name = DRV_NAME, + .id_table = amd, + .probe = amd_init_one, + .remove = ata_pci_remove_one +}; + +static int __init amd_init(void) +{ + return pci_register_driver(&amd_pci_driver); +} + +static void __exit amd_exit(void) +{ + pci_unregister_driver(&amd_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for AMD PATA IDE"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, amd); +MODULE_VERSION(DRV_VERSION); + +module_init(amd_init); +module_exit(amd_exit); diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c new file mode 100644 index 0000000..d6ef3bf --- /dev/null +++ b/drivers/ata/pata_artop.c @@ -0,0 +1,518 @@ +/* + * pata_artop.c - ARTOP ATA controller driver + * + * (C) 2006 Red Hat <alan@redhat.com> + * + * Based in part on drivers/ide/pci/aec62xx.c + * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> + * 865/865R fixes for Macintosh card version from a patch to the old + * driver by Thibaut VARENE <varenet@parisc-linux.org> + * When setting the PCI latency we must set 0x80 or higher for burst + * performance Alessandro Zummo <alessandro.zummo@towertech.it> + * + * TODO + * 850 serialization once the core supports it + * Investigate no_dsc on 850R + * Clock detect + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/ata.h> + +#define DRV_NAME "pata_artop" +#define DRV_VERSION "0.4.1" + +/* + * The ARTOP has 33 Mhz and "over clocked" timing tables. Until we + * get PCI bus speed functionality we leave this as 0. Its a variable + * for when we get the functionality and also for folks wanting to + * test stuff. + */ + +static int clock = 0; + +static int artop6210_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + const struct pci_bits artop_enable_bits[] = { + { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * artop6210_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6210_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, artop6210_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * artop6260_pre_reset - check for 40/80 pin + * @ap: Port + * + * The ARTOP hardware reports the cable detect bits in register 0x49. + * Nothing complicated needed here. + */ + +static int artop6260_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits artop_enable_bits[] = { + { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + /* Odd numbered device ids are the units with enable bits (the -R cards) */ + if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + pci_read_config_byte(pdev, 0x49, &tmp); + if (tmp & (1 >> ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * artop6260_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6260_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, artop6260_pre_reset, + ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * artop6210_load_piomode - Load a set of PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device + * @pio: PIO mode + * + * Set PIO mode for device, in host controller PCI config space. This + * is used both to set PIO timings in PIO mode and also to set the + * matching PIO clocking for UDMA, as well as the MWDMA timings. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6210_load_piomode(struct ata_port *ap, struct ata_device *adev, unsigned int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + const u16 timing[2][5] = { + { 0x0000, 0x000A, 0x0008, 0x0303, 0x0301 }, + { 0x0700, 0x070A, 0x0708, 0x0403, 0x0401 } + + }; + /* Load the PIO timing active/recovery bits */ + pci_write_config_word(pdev, 0x40 + 2 * dn, timing[clock][pio]); +} + +/** + * artop6210_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * + * Set PIO mode for device, in host controller PCI config space. For + * ARTOP we must also clear the UDMA bits if we are not doing UDMA. In + * the event UDMA is used the later call to set_dmamode will set the + * bits as required. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6210_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + u8 ultra; + + artop6210_load_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); + + /* Clear the UDMA mode bits (set_dmamode will redo this if needed) */ + pci_read_config_byte(pdev, 0x54, &ultra); + ultra &= ~(3 << (2 * dn)); + pci_write_config_byte(pdev, 0x54, ultra); +} + +/** + * artop6260_load_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * @pio: PIO mode + * + * Set PIO mode for device, in host controller PCI config space. The + * ARTOP6260 and relatives store the timing data differently. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6260_load_piomode (struct ata_port *ap, struct ata_device *adev, unsigned int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + const u8 timing[2][5] = { + { 0x00, 0x0A, 0x08, 0x33, 0x31 }, + { 0x70, 0x7A, 0x78, 0x43, 0x41 } + + }; + /* Load the PIO timing active/recovery bits */ + pci_write_config_byte(pdev, 0x40 + dn, timing[clock][pio]); +} + +/** + * artop6260_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * + * Set PIO mode for device, in host controller PCI config space. For + * ARTOP we must also clear the UDMA bits if we are not doing UDMA. In + * the event UDMA is used the later call to set_dmamode will set the + * bits as required. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6260_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ultra; + + artop6260_load_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); + + /* Clear the UDMA mode bits (set_dmamode will redo this if needed) */ + pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra); + ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */ + pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra); +} + +/** + * artop6210_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set DMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6210_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = adev->devno + 2 * ap->port_no; + u8 ultra; + + if (adev->dma_mode == XFER_MW_DMA_0) + pio = 1; + else + pio = 4; + + /* Load the PIO timing active/recovery bits */ + artop6210_load_piomode(ap, adev, pio); + + pci_read_config_byte(pdev, 0x54, &ultra); + ultra &= ~(3 << (2 * dn)); + + /* Add ultra DMA bits if in UDMA mode */ + if (adev->dma_mode >= XFER_UDMA_0) { + u8 mode = (adev->dma_mode - XFER_UDMA_0) + 1 - clock; + if (mode == 0) + mode = 1; + ultra |= (mode << (2 * dn)); + } + pci_write_config_byte(pdev, 0x54, ultra); +} + +/** + * artop6260_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring + * + * Set DMA mode for device, in host controller PCI config space. The + * ARTOP6260 and relatives store the timing data differently. + * + * LOCKING: + * None (inherited from caller). + */ + +static void artop6260_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ultra; + + if (adev->dma_mode == XFER_MW_DMA_0) + pio = 1; + else + pio = 4; + + /* Load the PIO timing active/recovery bits */ + artop6260_load_piomode(ap, adev, pio); + + /* Add ultra DMA bits if in UDMA mode */ + pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra); + ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */ + if (adev->dma_mode >= XFER_UDMA_0) { + u8 mode = adev->dma_mode - XFER_UDMA_0 + 1 - clock; + if (mode == 0) + mode = 1; + ultra |= (mode << (4 * adev->devno)); + } + pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra); +} + +static struct scsi_host_template artop_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations artop6210_ops = { + .port_disable = ata_port_disable, + .set_piomode = artop6210_set_piomode, + .set_dmamode = artop6210_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = artop6210_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static const struct ata_port_operations artop6260_ops = { + .port_disable = ata_port_disable, + .set_piomode = artop6260_set_piomode, + .set_dmamode = artop6260_set_dmamode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = artop6260_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * artop_init_one - Register ARTOP ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in artop_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) +{ + static int printed_version; + static struct ata_port_info info_6210 = { + .sht = &artop_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA2, + .port_ops = &artop6210_ops, + }; + static struct ata_port_info info_626x = { + .sht = &artop_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA4, + .port_ops = &artop6260_ops, + }; + static struct ata_port_info info_626x_fast = { + .sht = &artop_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA5, + .port_ops = &artop6260_ops, + }; + struct ata_port_info *port_info[2]; + struct ata_port_info *info; + int ports = 2; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + if (id->driver_data == 0) { /* 6210 variant */ + info = &info_6210; + /* BIOS may have left us in UDMA, clear it before libata probe */ + pci_write_config_byte(pdev, 0x54, 0); + /* For the moment (also lacks dsc) */ + printk(KERN_WARNING "ARTOP 6210 requires serialize functionality not yet supported by libata.\n"); + printk(KERN_WARNING "Secondary ATA ports will not be activated.\n"); + ports = 1; + } + else if (id->driver_data == 1) /* 6260 */ + info = &info_626x; + else if (id->driver_data == 2) { /* 6260 or 6260 + fast */ + unsigned long io = pci_resource_start(pdev, 4); + u8 reg; + + info = &info_626x; + if (inb(io) & 0x10) + info = &info_626x_fast; + /* Mac systems come up with some registers not set as we + will need them */ + + /* Clear reset & test bits */ + pci_read_config_byte(pdev, 0x49, ®); + pci_write_config_byte(pdev, 0x49, reg & ~ 0x30); + + /* PCI latency must be > 0x80 for burst mode, tweak it + * if required. + */ + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, ®); + if (reg <= 0x80) + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90); + + /* Enable IRQ output and burst mode */ + pci_read_config_byte(pdev, 0x4a, ®); + pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80); + + } + port_info[0] = port_info[1] = info; + return ata_pci_init_one(pdev, port_info, ports); +} + +static const struct pci_device_id artop_pci_tbl[] = { + { 0x1191, 0x0005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0x1191, 0x0006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { 0x1191, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { 0x1191, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { 0x1191, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { } /* terminate list */ +}; + +static struct pci_driver artop_pci_driver = { + .name = DRV_NAME, + .id_table = artop_pci_tbl, + .probe = artop_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init artop_init(void) +{ + return pci_register_driver(&artop_pci_driver); +} + +static void __exit artop_exit(void) +{ + pci_unregister_driver(&artop_pci_driver); +} + + +module_init(artop_init); +module_exit(artop_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for ARTOP PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, artop_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c new file mode 100644 index 0000000..3f78a1e --- /dev/null +++ b/drivers/ata/pata_atiixp.c @@ -0,0 +1,306 @@ +/* + * pata_atiixp.c - ATI PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * Based on + * + * linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004 + * + * Copyright (C) 2003 ATI Inc. <hyu@ati.com> + * Copyright (C) 2004 Bartlomiej Zolnierkiewicz + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_atiixp" +#define DRV_VERSION "0.4.2" + +enum { + ATIIXP_IDE_PIO_TIMING = 0x40, + ATIIXP_IDE_MWDMA_TIMING = 0x44, + ATIIXP_IDE_PIO_CONTROL = 0x48, + ATIIXP_IDE_PIO_MODE = 0x4a, + ATIIXP_IDE_UDMA_CONTROL = 0x54, + ATIIXP_IDE_UDMA_MODE = 0x56 +}; + +static int atiixp_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static struct pci_bits atiixp_enable_bits[] = { + { 0x48, 1, 0x01, 0x00 }, + { 0x48, 1, 0x08, 0x00 } + }; + + if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +static void atiixp_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, atiixp_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * atiixp_set_pio_timing - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called by both the pio and dma setup functions to set the controller + * timings for PIO transfers. We must load both the mode number and + * timing values into the controller. + */ + +static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio) +{ + static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = 2 * ap->port_no + adev->devno; + + /* Check this is correct - the order is odd in both drivers */ + int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); + u16 pio_mode_data, pio_timing_data; + + pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); + pio_mode_data &= ~(0x7 << (4 * dn)); + pio_mode_data |= pio << (4 * dn); + pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data); + + pci_read_config_word(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data); + pio_mode_data &= ~(0xFF << timing_shift); + pio_mode_data |= (pio_timings[pio] << timing_shift); + pci_write_config_word(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); +} + +/** + * atiixp_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. We use a shared helper for this + * as the DMA setup must also adjust the PIO timing information. + */ + +static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * atiixp_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. We use timing tables for most + * modes but must tune an appropriate PIO mode to match. + */ + +static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dma = adev->dma_mode; + int dn = 2 * ap->port_no + adev->devno; + int wanted_pio; + + if (adev->dma_mode >= XFER_UDMA_0) { + u16 udma_mode_data; + + dma -= XFER_UDMA_0; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data); + udma_mode_data &= ~(0x7 << (4 * dn)); + udma_mode_data |= dma << (4 * dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data); + } else { + u16 mwdma_timing_data; + /* Check this is correct - the order is odd in both drivers */ + int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); + + dma -= XFER_MW_DMA_0; + + pci_read_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, &mwdma_timing_data); + mwdma_timing_data &= ~(0xFF << timing_shift); + mwdma_timing_data |= (mwdma_timings[dma] << timing_shift); + pci_write_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, mwdma_timing_data); + } + /* + * We must now look at the PIO mode situation. We may need to + * adjust the PIO mode to keep the timings acceptable + */ + if (adev->dma_mode >= XFER_MW_DMA_2) + wanted_pio = 4; + else if (adev->dma_mode == XFER_MW_DMA_1) + wanted_pio = 3; + else if (adev->dma_mode == XFER_MW_DMA_0) + wanted_pio = 0; + else BUG(); + + if (adev->pio_mode != wanted_pio) + atiixp_set_pio_timing(ap, adev, wanted_pio); +} + +/** + * atiixp_bmdma_start - DMA start callback + * @qc: Command in progress + * + * When DMA begins we need to ensure that the UDMA control + * register for the channel is correctly set. + */ + +static void atiixp_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = (2 * ap->port_no) + adev->devno; + u16 tmp16; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); + if (adev->dma_mode >= XFER_UDMA_0) + tmp16 |= (1 << dn); + else + tmp16 &= ~(1 << dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); + ata_bmdma_start(qc); +} + +/** + * atiixp_dma_stop - DMA stop callback + * @qc: Command in progress + * + * DMA has completed. Clear the UDMA flag as the next operations will + * be PIO ones not UDMA data transfer. + */ + +static void atiixp_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = (2 * ap->port_no) + qc->dev->devno; + u16 tmp16; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); + tmp16 &= ~(1 << dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); + ata_bmdma_stop(qc); +} + +static struct scsi_host_template atiixp_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations atiixp_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = atiixp_set_piomode, + .set_dmamode = atiixp_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = atiixp_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = atiixp_bmdma_start, + .bmdma_stop = atiixp_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &atiixp_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x06, /* No MWDMA0 support */ + .udma_mask = 0x3F, + .port_ops = &atiixp_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id atiixp[] = { + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), }, + { 0, }, +}; + +static struct pci_driver atiixp_pci_driver = { + .name = DRV_NAME, + .id_table = atiixp, + .probe = atiixp_init_one, + .remove = ata_pci_remove_one +}; + +static int __init atiixp_init(void) +{ + return pci_register_driver(&atiixp_pci_driver); +} + + +static void __exit atiixp_exit(void) +{ + pci_unregister_driver(&atiixp_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, atiixp); +MODULE_VERSION(DRV_VERSION); + +module_init(atiixp_init); +module_exit(atiixp_exit); diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c new file mode 100644 index 0000000..abf1bb7 --- /dev/null +++ b/drivers/ata/pata_cmd64x.c @@ -0,0 +1,505 @@ +/* + * pata_cmd64x.c - ATI PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * Based upon + * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 + * + * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. + * Note, this driver is not used at all on other systems because + * there the "BIOS" has done all of the following already. + * Due to massive hardware bugs, UltraDMA is only supported + * on the 646U2 and not on the 646U. + * + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1998 David S. Miller (davem@redhat.com) + * + * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> + * + * TODO + * Testing work + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_cmd64x" +#define DRV_VERSION "0.2.1" + +/* + * CMD64x specific registers definition. + */ + +enum { + CFR = 0x50, + CFR_INTR_CH0 = 0x02, + CNTRL = 0x51, + CNTRL_DIS_RA0 = 0x40, + CNTRL_DIS_RA1 = 0x80, + CNTRL_ENA_2ND = 0x08, + CMDTIM = 0x52, + ARTTIM0 = 0x53, + DRWTIM0 = 0x54, + ARTTIM1 = 0x55, + DRWTIM1 = 0x56, + ARTTIM23 = 0x57, + ARTTIM23_DIS_RA2 = 0x04, + ARTTIM23_DIS_RA3 = 0x08, + ARTTIM23_INTR_CH1 = 0x10, + ARTTIM2 = 0x57, + ARTTIM3 = 0x57, + DRWTIM23 = 0x58, + DRWTIM2 = 0x58, + BRST = 0x59, + DRWTIM3 = 0x5b, + BMIDECR0 = 0x70, + MRDMODE = 0x71, + MRDMODE_INTR_CH0 = 0x04, + MRDMODE_INTR_CH1 = 0x08, + MRDMODE_BLK_CH0 = 0x10, + MRDMODE_BLK_CH1 = 0x20, + BMIDESR0 = 0x72, + UDIDETCR0 = 0x73, + DTPR0 = 0x74, + BMIDECR1 = 0x78, + BMIDECSR = 0x79, + BMIDESR1 = 0x7A, + UDIDETCR1 = 0x7B, + DTPR1 = 0x7C +}; + +static int cmd64x_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static int cmd648_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 r; + + /* Check cable detect bits */ + pci_read_config_byte(pdev, BMIDECSR, &r); + if (r & (1 << ap->port_no)) + ap->cbl = ATA_CBL_PATA80; + else + ap->cbl = ATA_CBL_PATA40; + + return ata_std_prereset(ap); +} + +static void cmd64x_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, cmd64x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +static void cmd648_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, cmd648_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * cmd64x_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. + */ + +static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_timing t; + const unsigned long T = 1000000 / 33; + const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 }; + + u8 reg; + + /* Port layout is not logical so use a table */ + const u8 arttim_port[2][2] = { + { ARTTIM0, ARTTIM1 }, + { ARTTIM23, ARTTIM23 } + }; + const u8 drwtim_port[2][2] = { + { DRWTIM0, DRWTIM1 }, + { DRWTIM2, DRWTIM3 } + }; + + int arttim = arttim_port[ap->port_no][adev->devno]; + int drwtim = drwtim_port[ap->port_no][adev->devno]; + + + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) { + printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); + return; + } + if (ap->port_no) { + /* Slave has shared address setup */ + struct ata_device *pair = ata_dev_pair(adev); + + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, T, 0); + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + } + + printk(KERN_DEBUG DRV_NAME ": active %d recovery %d setup %d.\n", + t.active, t.recover, t.setup); + if (t.recover > 16) { + t.active += t.recover - 16; + t.recover = 16; + } + if (t.active > 16) + t.active = 16; + + /* Now convert the clocks into values we can actually stuff into + the chip */ + + if (t.recover > 1) + t.recover--; + else + t.recover = 15; + + if (t.setup > 4) + t.setup = 0xC0; + else + t.setup = setup_data[t.setup]; + + t.active &= 0x0F; /* 0 = 16 */ + + /* Load setup timing */ + pci_read_config_byte(pdev, arttim, ®); + reg &= 0x3F; + reg |= t.setup; + pci_write_config_byte(pdev, arttim, reg); + + /* Load active/recovery */ + pci_write_config_byte(pdev, drwtim, (t.active << 4) | t.recover); +} + +/** + * cmd64x_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. + */ + +static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 udma_data[] = { + 0x31, 0x21, 0x11, 0x25, 0x15, 0x05 + }; + static const u8 mwdma_data[] = { + 0x30, 0x20, 0x10 + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 regU, regD; + + int pciU = UDIDETCR0 + 8 * ap->port_no; + int pciD = BMIDESR0 + 8 * ap->port_no; + int shift = 2 * adev->devno; + + pci_read_config_byte(pdev, pciD, ®D); + pci_read_config_byte(pdev, pciU, ®U); + + regD &= ~(0x20 << shift); + regU &= ~(0x35 << shift); + + if (adev->dma_mode >= XFER_UDMA_0) + regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift; + else + regD |= mwdma_data[adev->dma_mode - XFER_MW_DMA_0] << shift; + + regD |= 0x20 << adev->devno; + + pci_write_config_byte(pdev, pciU, regU); + pci_write_config_byte(pdev, pciD, regD); +} + +/** + * cmd648_dma_stop - DMA stop callback + * @qc: Command in progress + * + * DMA has completed. + */ + +static void cmd648_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 dma_intr; + int dma_reg = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; + int dma_mask = ap->port_no ? ARTTIM2 : CFR; + + ata_bmdma_stop(qc); + + pci_read_config_byte(pdev, dma_reg, &dma_intr); + pci_write_config_byte(pdev, dma_reg, dma_intr | dma_mask); +} + +/** + * cmd646r1_dma_stop - DMA stop callback + * @qc: Command in progress + * + * Stub for now while investigating the r1 quirk in the old driver. + */ + +static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); +} + +static struct scsi_host_template cmd64x_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations cmd64x_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cmd64x_set_piomode, + .set_dmamode = cmd64x_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cmd64x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations cmd646r1_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cmd64x_set_piomode, + .set_dmamode = cmd64x_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cmd64x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = cmd646r1_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations cmd648_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cmd64x_set_piomode, + .set_dmamode = cmd64x_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cmd648_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = cmd648_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + u32 class_rev; + + static struct ata_port_info cmd_info[6] = { + { /* CMD 643 - no UDMA */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cmd64x_port_ops + }, + { /* CMD 646 with broken UDMA */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cmd64x_port_ops + }, + { /* CMD 646 with working UDMA */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA1, + .port_ops = &cmd64x_port_ops + }, + { /* CMD 646 rev 1 */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cmd646r1_port_ops + }, + { /* CMD 648 */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA2, + .port_ops = &cmd648_port_ops + }, + { /* CMD 649 */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA3, + .port_ops = &cmd648_port_ops + } + }; + static struct ata_port_info *port_info[2], *info; + u8 mrdmode; + + info = &cmd_info[id->driver_data]; + + pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xFF; + + if (id->driver_data == 0) /* 643 */ + ata_pci_clear_simplex(pdev); + + if (pdev->device == PCI_DEVICE_ID_CMD_646) { + /* Does UDMA work ? */ + if (class_rev > 4) + info = &cmd_info[2]; + /* Early rev with other problems ? */ + else if (class_rev == 1) + info = &cmd_info[3]; + } + + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); + pci_read_config_byte(pdev, MRDMODE, &mrdmode); + mrdmode &= ~ 0x30; /* IRQ set up */ + mrdmode |= 0x02; /* Memory read line enable */ + pci_write_config_byte(pdev, MRDMODE, mrdmode); + + /* Force PIO 0 here.. */ + + /* PPC specific fixup copied from old driver */ +#ifdef CONFIG_PPC + pci_write_config_byte(pdev, UDIDETCR0, 0xF0); +#endif + + port_info[0] = port_info[1] = info; + return ata_pci_init_one(pdev, port_info, 2); +} + +static struct pci_device_id cmd64x[] = { + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_643, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_649, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, + { 0, }, +}; + +static struct pci_driver cmd64x_pci_driver = { + .name = DRV_NAME, + .id_table = cmd64x, + .probe = cmd64x_init_one, + .remove = ata_pci_remove_one +}; + +static int __init cmd64x_init(void) +{ + return pci_register_driver(&cmd64x_pci_driver); +} + + +static void __exit cmd64x_exit(void) +{ + pci_unregister_driver(&cmd64x_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for CMD64x series PATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cmd64x); +MODULE_VERSION(DRV_VERSION); + +module_init(cmd64x_init); +module_exit(cmd64x_exit); diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c new file mode 100644 index 0000000..792ce48 --- /dev/null +++ b/drivers/ata/pata_cs5520.c @@ -0,0 +1,336 @@ +/* + * IDE tuning and bus mastering support for the CS5510/CS5520 + * chipsets + * + * The CS5510/CS5520 are slightly unusual devices. Unlike the + * typical IDE controllers they do bus mastering with the drive in + * PIO mode and smarter silicon. + * + * The practical upshot of this is that we must always tune the + * drive for the right PIO mode. We must also ignore all the blacklists + * and the drive bus mastering DMA information. Also to confuse matters + * further we can do DMA on PIO only drives. + * + * DMA on the 5510 also requires we disable_hlt() during DMA on early + * revisions. + * + * *** This driver is strictly experimental *** + * + * (c) Copyright Red Hat Inc 2002 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * Documentation: + * Not publically available. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_cs5520" +#define DRV_VERSION "0.6.2" + +struct pio_clocks +{ + int address; + int assert; + int recovery; +}; + +static const struct pio_clocks cs5520_pio_clocks[]={ + {3, 6, 11}, + {2, 5, 6}, + {1, 4, 3}, + {1, 3, 2}, + {1, 2, 1} +}; + +/** + * cs5520_set_timings - program PIO timings + * @ap: ATA port + * @adev: ATA device + * + * Program the PIO mode timings for the controller according to the pio + * clocking table. + */ + +static void cs5520_set_timings(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int slave = adev->devno; + + pio -= XFER_PIO_0; + + /* Channel command timing */ + pci_write_config_byte(pdev, 0x62 + ap->port_no, + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); + /* FIXME: should these use address ? */ + /* Read command timing */ + pci_write_config_byte(pdev, 0x64 + 4*ap->port_no + slave, + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); + /* Write command timing */ + pci_write_config_byte(pdev, 0x66 + 4*ap->port_no + slave, + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); +} + +/** + * cs5520_enable_dma - turn on DMA bits + * + * Turn on the DMA bits for this disk. Needed because the BIOS probably + * has not done the work for us. Belongs in the core SATA code. + */ + +static void cs5520_enable_dma(struct ata_port *ap, struct ata_device *adev) +{ + /* Set the DMA enable/disable flag */ + u8 reg = inb(ap->ioaddr.bmdma_addr + 0x02); + reg |= 1<<(adev->devno + 5); + outb(reg, ap->ioaddr.bmdma_addr + 0x02); +} + +/** + * cs5520_set_dmamode - program DMA timings + * @ap: ATA port + * @adev: ATA device + * + * Program the DMA mode timings for the controller according to the pio + * clocking table. Note that this device sets the DMA timings to PIO + * mode values. This may seem bizarre but the 5520 architecture talks + * PIO mode to the disk and DMA mode to the controller so the underlying + * transfers are PIO timed. + */ + +static void cs5520_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const int dma_xlate[3] = { XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 }; + cs5520_set_timings(ap, adev, dma_xlate[adev->dma_mode]); + cs5520_enable_dma(ap, adev); +} + +/** + * cs5520_set_piomode - program PIO timings + * @ap: ATA port + * @adev: ATA device + * + * Program the PIO mode timings for the controller according to the pio + * clocking table. We know pio_mode will equal dma_mode because of the + * CS5520 architecture. At least once we turned DMA on and wrote a + * mode setter. + */ + +static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + cs5520_set_timings(ap, adev, adev->pio_mode); +} + + +static int cs5520_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static void cs5520_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, cs5520_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +static struct scsi_host_template cs5520_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations cs5520_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cs5520_set_piomode, + .set_dmamode = cs5520_set_dmamode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cs5520_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + u8 pcicfg; + static struct ata_probe_ent probe[2]; + int ports = 0; + + /* IDE port enable bits */ + pci_read_config_byte(dev, 0x60, &pcicfg); + + /* Check if the ATA ports are enabled */ + if ((pcicfg & 3) == 0) + return -ENODEV; + + if ((pcicfg & 0x40) == 0) { + printk(KERN_WARNING DRV_NAME ": DMA mode disabled. Enabling.\n"); + pci_write_config_byte(dev, 0x60, pcicfg | 0x40); + } + + /* Perform set up for DMA */ + if (pci_enable_device_bars(dev, 1<<2)) { + printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n"); + return -ENODEV; + } + pci_set_master(dev); + if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { + printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n"); + return -ENODEV; + } + if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) { + printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n"); + return -ENODEV; + } + + /* We have to do our own plumbing as the PCI setup for this + chipset is non-standard so we can't punt to the libata code */ + + INIT_LIST_HEAD(&probe[0].node); + probe[0].dev = pci_dev_to_dev(dev); + probe[0].port_ops = &cs5520_port_ops; + probe[0].sht = &cs5520_sht; + probe[0].pio_mask = 0x1F; + probe[0].mwdma_mask = id->driver_data; + probe[0].irq = 14; + probe[0].irq_flags = 0; + probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST; + probe[0].n_ports = 1; + probe[0].port[0].cmd_addr = 0x1F0; + probe[0].port[0].ctl_addr = 0x3F6; + probe[0].port[0].altstatus_addr = 0x3F6; + probe[0].port[0].bmdma_addr = pci_resource_start(dev, 2); + + /* The secondary lurks at different addresses but is otherwise + the same beastie */ + + probe[1] = probe[0]; + INIT_LIST_HEAD(&probe[1].node); + probe[1].irq = 15; + probe[1].port[0].cmd_addr = 0x170; + probe[1].port[0].ctl_addr = 0x376; + probe[1].port[0].altstatus_addr = 0x376; + probe[1].port[0].bmdma_addr = pci_resource_start(dev, 2) + 8; + + /* Let libata fill in the port details */ + ata_std_ports(&probe[0].port[0]); + ata_std_ports(&probe[1].port[0]); + + /* Now add the ports that are active */ + if (pcicfg & 1) + ports += ata_device_add(&probe[0]); + if (pcicfg & 2) + ports += ata_device_add(&probe[1]); + if (ports) + return 0; + return -ENODEV; +} + +/** + * cs5520_remove_one - device unload + * @pdev: PCI device being removed + * + * Handle an unplug/unload event for a PCI device. Unload the + * PCI driver but do not use the default handler as we manage + * resources ourself and *MUST NOT* disable the device as it has + * other functions. + */ + +static void __devexit cs5520_remove_one(struct pci_dev *pdev) +{ + struct device *dev = pci_dev_to_dev(pdev); + struct ata_host *host = dev_get_drvdata(dev); + + ata_host_remove(host); + dev_set_drvdata(dev, NULL); +} + +/* For now keep DMA off. We can set it for all but A rev CS5510 once the + core ATA code can handle it */ + +static struct pci_device_id pata_cs5520[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510), }, + { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520), }, + { 0, }, +}; + +static struct pci_driver cs5520_pci_driver = { + .name = DRV_NAME, + .id_table = pata_cs5520, + .probe = cs5520_init_one, + .remove = cs5520_remove_one +}; + + +static int __init cs5520_init(void) +{ + return pci_register_driver(&cs5520_pci_driver); +} + +static void __exit cs5520_exit(void) +{ + pci_unregister_driver(&cs5520_pci_driver); +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Cyrix CS5510/5520"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pata_cs5520); +MODULE_VERSION(DRV_VERSION); + +module_init(cs5520_init); +module_exit(cs5520_exit); + diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c new file mode 100644 index 0000000..f3d8a3b --- /dev/null +++ b/drivers/ata/pata_cs5530.c @@ -0,0 +1,387 @@ +/* + * pata-cs5530.c - CS5530 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * based upon cs5530.c by Mark Lord. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Available from AMD web site. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/dmi.h> + +#define DRV_NAME "pata_cs5530" +#define DRV_VERSION "0.6" + +/** + * cs5530_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. This is fairly simple on the CS5530 + * chips. + */ + +static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const unsigned int cs5530_pio_timings[2][5] = { + {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, + {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010} + }; + unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no; + u32 tuning; + int format; + + /* Find out which table to use */ + tuning = inl(base + 0x04); + format = (tuning & 0x80000000UL) ? 1 : 0; + + /* Now load the right timing register */ + if (adev->devno) + base += 0x08; + + outl(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base); +} + +/** + * cs5530_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * We cannot mix MWDMA and UDMA without reloading timings each switch + * master to slave. We track the last DMA setup in order to minimise + * reloads. + */ + +static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no; + u32 tuning, timing = 0; + u8 reg; + + /* Find out which table to use */ + tuning = inl(base + 0x04); + + switch(adev->dma_mode) { + case XFER_UDMA_0: + timing = 0x00921250;break; + case XFER_UDMA_1: + timing = 0x00911140;break; + case XFER_UDMA_2: + timing = 0x00911030;break; + case XFER_MW_DMA_0: + timing = 0x00077771;break; + case XFER_MW_DMA_1: + timing = 0x00012121;break; + case XFER_MW_DMA_2: + timing = 0x00002020;break; + default: + BUG(); + } + /* Merge in the PIO format bit */ + timing |= (tuning & 0x80000000UL); + if (adev->devno == 0) /* Master */ + outl(timing, base + 0x04); + else { + if (timing & 0x00100000) + tuning |= 0x00100000; /* UDMA for both */ + else + tuning &= ~0x00100000; /* MWDMA for both */ + outl(tuning, base + 0x04); + outl(timing, base + 0x0C); + } + + /* Set the DMA capable bit in the BMDMA area */ + reg = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + reg |= (1 << (5 + adev->devno)); + outb(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + + /* Remember the last DMA setup we did */ + + ap->private_data = adev; +} + +/** + * cs5530_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. Specifically we have a problem that there is only + * one MWDMA/UDMA bit. + */ + +static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_device *prev = ap->private_data; + + /* See if the DMA settings could be wrong */ + if (adev->dma_mode != 0 && adev != prev && prev != NULL) { + /* Maybe, but do the channels match MWDMA/UDMA ? */ + if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) || + (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0)) + /* Switch the mode bits */ + cs5530_set_dmamode(ap, adev); + } + + return ata_qc_issue_prot(qc); +} + +static int cs5530_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static void cs5530_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, cs5530_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + + +static struct scsi_host_template cs5530_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations cs5530_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cs5530_set_piomode, + .set_dmamode = cs5530_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cs5530_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = cs5530_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct dmi_system_id palmax_dmi_table[] = { + { + .ident = "Palmax PD1100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Cyrix"), + DMI_MATCH(DMI_PRODUCT_NAME, "Caddis"), + }, + }, + { } +}; + +static int cs5530_is_palmax(void) +{ + if (dmi_check_system(palmax_dmi_table)) { + printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n"); + return 1; + } + return 0; +} + +/** + * cs5530_init_one - Initialise a CS5530 + * @dev: PCI device + * @id: Entry in match table + * + * Install a driver for the newly found CS5530 companion chip. Most of + * this is just housekeeping. We have to set the chip up correctly and + * turn off various bits of emulation magic. + */ + +static int cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + int compiler_warning_pointless_fix; + struct pci_dev *master_0 = NULL, *cs5530_0 = NULL; + static struct ata_port_info info = { + .sht = &cs5530_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, + .port_ops = &cs5530_port_ops + }; + /* The docking connector doesn't do UDMA, and it seems not MWDMA */ + static struct ata_port_info info_palmax_secondary = { + .sht = &cs5530_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &cs5530_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + dev = NULL; + while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) { + switch (dev->device) { + case PCI_DEVICE_ID_CYRIX_PCI_MASTER: + master_0 = pci_dev_get(dev); + break; + case PCI_DEVICE_ID_CYRIX_5530_LEGACY: + cs5530_0 = pci_dev_get(dev); + break; + } + } + if (!master_0) { + printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n"); + goto fail_put; + } + if (!cs5530_0) { + printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n"); + goto fail_put; + } + + pci_set_master(cs5530_0); + compiler_warning_pointless_fix = pci_set_mwi(cs5530_0); + + /* + * Set PCI CacheLineSize to 16-bytes: + * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530 + * + * Note: This value is constant because the 5530 is only a Geode companion + */ + + pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04); + + /* + * Disable trapping of UDMA register accesses (Win98 hack): + * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530 + */ + + pci_write_config_word(cs5530_0, 0xd0, 0x5006); + + /* + * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus: + * The other settings are what is necessary to get the register + * into a sane state for IDE DMA operation. + */ + + pci_write_config_byte(master_0, 0x40, 0x1e); + + /* + * Set max PCI burst size (16-bytes seems to work best): + * 16bytes: set bit-1 at 0x41 (reg value of 0x16) + * all others: clear bit-1 at 0x41, and do: + * 128bytes: OR 0x00 at 0x41 + * 256bytes: OR 0x04 at 0x41 + * 512bytes: OR 0x08 at 0x41 + * 1024bytes: OR 0x0c at 0x41 + */ + + pci_write_config_byte(master_0, 0x41, 0x14); + + /* + * These settings are necessary to get the chip + * into a sane state for IDE DMA operation. + */ + + pci_write_config_byte(master_0, 0x42, 0x00); + pci_write_config_byte(master_0, 0x43, 0xc1); + + pci_dev_put(master_0); + pci_dev_put(cs5530_0); + + if (cs5530_is_palmax()) + port_info[1] = &info_palmax_secondary; + + /* Now kick off ATA set up */ + return ata_pci_init_one(dev, port_info, 2); + +fail_put: + if (master_0) + pci_dev_put(master_0); + if (cs5530_0) + pci_dev_put(cs5530_0); + return -ENODEV; +} + +static struct pci_device_id cs5530[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), }, + { 0, }, +}; + +static struct pci_driver cs5530_pci_driver = { + .name = DRV_NAME, + .id_table = cs5530, + .probe = cs5530_init_one, + .remove = ata_pci_remove_one +}; + +static int __init cs5530_init(void) +{ + return pci_register_driver(&cs5530_pci_driver); +} + + +static void __exit cs5530_exit(void) +{ + pci_unregister_driver(&cs5530_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5530); +MODULE_VERSION(DRV_VERSION); + +module_init(cs5530_init); +module_exit(cs5530_exit); diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c new file mode 100644 index 0000000..69d6b42 --- /dev/null +++ b/drivers/ata/pata_cs5535.c @@ -0,0 +1,291 @@ +/* + * pata-cs5535.c - CS5535 PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and + * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de + * and Alexander Kiausch <alex.kiausch@t-online.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Available from AMD web site. + * TODO + * Review errata to see if serializing is neccessary + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <asm/msr.h> + +#define DRV_NAME "cs5535" +#define DRV_VERSION "0.2.10" + +/* + * The Geode (Aka Athlon GX now) uses an internal MSR based + * bus system for control. Demented but there you go. + */ + +#define MSR_ATAC_BASE 0x51300000 +#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) +#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) +#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) +#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) +#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) +#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) +#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) +#define ATAC_RESET (MSR_ATAC_BASE+0x10) +#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) +#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) +#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) +#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) +#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) + +#define ATAC_BM0_CMD_PRIM 0x00 +#define ATAC_BM0_STS_PRIM 0x02 +#define ATAC_BM0_PRD 0x04 + +#define CS5535_CABLE_DETECT 0x48 + +#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 ) + +/** + * cs5535_pre_reset - detect cable type + * @ap: Port to detect on + * + * Perform cable detection for ATA66 capable cable. Return a libata + * cable type. + */ + +static int cs5535_pre_reset(struct ata_port *ap) +{ + u8 cable; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable); + if (cable & 1) + ap->cbl = ATA_CBL_PATA80; + else + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * cs5535_error_handler - reset/probe + * @ap: Port to reset + * + * Reset and configure a port + */ + +static void cs5535_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, cs5535_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * cs5535_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. The CS5535 is pretty clean about all this + */ + +static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u16 pio_timings[5] = { + 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 + }; + static const u16 pio_cmd_timings[5] = { + 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 + }; + u32 reg, dummy; + struct ata_device *pair = ata_dev_pair(adev); + + int mode = adev->pio_mode - XFER_PIO_0; + int cmdmode = mode; + + /* Command timing has to be for the lowest of the pair of devices */ + if (pair) { + int pairmode = pair->pio_mode - XFER_PIO_0; + cmdmode = min(mode, pairmode); + /* Write the other drive timing register if it changed */ + if (cmdmode < pairmode) + wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno, + pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0); + } + /* Write the drive timing register */ + wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno, + pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0); + + /* Set the PIO "format 1" bit in the DMA timing register */ + rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); + wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0); +} + +/** + * cs5535_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + */ + +static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u32 udma_timings[5] = { + 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 + }; + static const u32 mwdma_timings[3] = { + 0x7F0FFFF3, 0x7F035352, 0x7F024241 + }; + u32 reg, dummy; + int mode = adev->dma_mode; + + rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); + reg &= 0x80000000UL; + if (mode >= XFER_UDMA_0) + reg |= udma_timings[mode - XFER_UDMA_0]; + else + reg |= mwdma_timings[mode - XFER_MW_DMA_0]; + wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0); +} + +static struct scsi_host_template cs5535_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations cs5535_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cs5535_set_piomode, + .set_dmamode = cs5535_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cs5535_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * cs5535_init_one - Initialise a CS5530 + * @dev: PCI device + * @id: Entry in match table + * + * Install a driver for the newly found CS5530 companion chip. Most of + * this is just housekeeping. We have to set the chip up correctly and + * turn off various bits of emulation magic. + */ + +static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &cs5535_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, + .port_ops = &cs5535_port_ops + }; + struct ata_port_info *ports[1] = { &info }; + + u32 timings, dummy; + + /* Check the BIOS set the initial timing clock. If not set the + timings for PIO0 */ + rdmsr(ATAC_CH0D0_PIO, timings, dummy); + if (CS5535_BAD_PIO(timings)) + wrmsr(ATAC_CH0D0_PIO, 0xF7F4F7F4UL, 0); + rdmsr(ATAC_CH0D1_PIO, timings, dummy); + if (CS5535_BAD_PIO(timings)) + wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0); + return ata_pci_init_one(dev, ports, 1); +} + +static struct pci_device_id cs5535[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, 0x002D), }, + { 0, }, +}; + +static struct pci_driver cs5535_pci_driver = { + .name = DRV_NAME, + .id_table = cs5535, + .probe = cs5535_init_one, + .remove = ata_pci_remove_one +}; + +static int __init cs5535_init(void) +{ + return pci_register_driver(&cs5535_pci_driver); +} + + +static void __exit cs5535_exit(void) +{ + pci_unregister_driver(&cs5535_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch"); +MODULE_DESCRIPTION("low-level driver for the NS/AMD 5530"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5535); +MODULE_VERSION(DRV_VERSION); + +module_init(cs5535_init); +module_exit(cs5535_exit); diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c new file mode 100644 index 0000000..fd55474 --- /dev/null +++ b/drivers/ata/pata_cypress.c @@ -0,0 +1,227 @@ +/* + * pata_cypress.c - Cypress PATA for new ATA layer + * (C) 2006 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * Based heavily on + * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002 + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_cypress" +#define DRV_VERSION "0.1.2" + +/* here are the offset definitions for the registers */ + +enum { + CY82_IDE_CMDREG = 0x04, + CY82_IDE_ADDRSETUP = 0x48, + CY82_IDE_MASTER_IOR = 0x4C, + CY82_IDE_MASTER_IOW = 0x4D, + CY82_IDE_SLAVE_IOR = 0x4E, + CY82_IDE_SLAVE_IOW = 0x4F, + CY82_IDE_MASTER_8BIT = 0x50, + CY82_IDE_SLAVE_8BIT = 0x51, + + CY82_INDEX_PORT = 0x22, + CY82_DATA_PORT = 0x23, + + CY82_INDEX_CTRLREG1 = 0x01, + CY82_INDEX_CHANNEL0 = 0x30, + CY82_INDEX_CHANNEL1 = 0x31, + CY82_INDEX_TIMEOUT = 0x32 +}; + +static int cy82c693_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static void cy82c693_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * cy82c693_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. + */ + +static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_timing t; + const unsigned long T = 1000000 / 33; + short time_16, time_8; + u32 addr; + + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) { + printk(KERN_ERR DRV_NAME ": mome computation failed.\n"); + return; + } + + time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4); + time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4); + + if (adev->devno == 0) { + pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); + + addr &= ~0x0F; /* Mask bits */ + addr |= FIT(t.setup, 0, 15); + + pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); + pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16); + pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16); + pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8); + } else { + pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); + + addr &= ~0xF0; /* Mask bits */ + addr |= (FIT(t.setup, 0, 15) << 4); + + pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOW, time_16); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_8BIT, time_8); + } +} + +/** + * cy82c693_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. + */ + +static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + int reg = CY82_INDEX_CHANNEL0 + ap->port_no; + + /* Be afraid, be very afraid. Magic registers in low I/O space */ + outb(reg, 0x22); + outb(adev->dma_mode - XFER_MW_DMA_0, 0x23); + + /* 0x50 gives the best behaviour on the Alpha's using this chip */ + outb(CY82_INDEX_TIMEOUT, 0x22); + outb(0x50, 0x23); +} + +static struct scsi_host_template cy82c693_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations cy82c693_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cy82c693_set_piomode, + .set_dmamode = cy82c693_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cy82c693_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &cy82c693_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cy82c693_port_ops + }; + static struct ata_port_info *port_info[1] = { &info }; + + /* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. For the + moment we don't handle the secondary. FIXME */ + + if (PCI_FUNC(pdev->devfn) != 1) + return -ENODEV; + + return ata_pci_init_one(pdev, port_info, 1); +} + +static struct pci_device_id cy82c693[] = { + { PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; + +static struct pci_driver cy82c693_pci_driver = { + .name = DRV_NAME, + .id_table = cy82c693, + .probe = cy82c693_init_one, + .remove = ata_pci_remove_one +}; + +static int __init cy82c693_init(void) +{ + return pci_register_driver(&cy82c693_pci_driver); +} + + +static void __exit cy82c693_exit(void) +{ + pci_unregister_driver(&cy82c693_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the CY82C693 PATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cy82c693); +MODULE_VERSION(DRV_VERSION); + +module_init(cy82c693_init); +module_exit(cy82c693_exit); diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c new file mode 100644 index 0000000..c30bc18 --- /dev/null +++ b/drivers/ata/pata_efar.c @@ -0,0 +1,342 @@ +/* + * pata_efar.c - EFAR PIIX clone controller driver + * + * (C) 2005 Red Hat <alan@redhat.com> + * + * Some parts based on ata_piix.c by Jeff Garzik and others. + * + * The EFAR is a PIIX4 clone with UDMA66 support. Unlike the later + * Intel ICH controllers the EFAR widened the UDMA mode register bits + * and doesn't require the funky clock selection. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/ata.h> + +#define DRV_NAME "pata_efar" +#define DRV_VERSION "0.4.1" + +/** + * efar_pre_reset - check for 40/80 pin + * @ap: Port + * + * Perform cable detection for the EFAR ATA interface. This is + * different to the PIIX arrangement + */ + +static int efar_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits efar_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + pci_read_config_byte(pdev, 0x47, &tmp); + if (tmp & (2 >> ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * efar_probe_reset - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void efar_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, efar_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * efar_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; + u16 idetm_data; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. The EFAR is a clone so very similar + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + if (pio > 2) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */ + control |= 2; /* IE enable */ + /* Intel specifies that the PPE functionality is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + + pci_read_config_word(dev, idetm_port, &idetm_data); + + /* Enable PPE, IE and TIME as appropriate */ + + if (adev->devno == 0) { + idetm_data &= 0xCCF0; + idetm_data |= control; + idetm_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } else { + int shift = 4 * ap->port_no; + u8 slave_data; + + idetm_data &= 0xCC0F; + idetm_data |= (control << 4); + + /* Slave timing in seperate register */ + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= 0x0F << shift; + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift; + pci_write_config_byte(dev, 0x44, slave_data); + } + + idetm_data |= 0x4000; /* Ensure SITRE is enabled */ + pci_write_config_word(dev, idetm_port, idetm_data); +} + +/** + * efar_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u8 master_port = ap->port_no ? 0x42 : 0x40; + u16 master_data; + u8 speed = adev->dma_mode; + int devid = adev->devno + 2 * ap->port_no; + u8 udma_enable; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(dev, master_port, &master_data); + pci_read_config_byte(dev, 0x48, &udma_enable); + + if (speed >= XFER_UDMA_0) { + unsigned int udma = adev->dma_mode - XFER_UDMA_0; + u16 udma_timing; + + udma_enable |= (1 << devid); + + /* Load the UDMA mode number */ + pci_read_config_word(dev, 0x4A, &udma_timing); + udma_timing &= ~(7 << (4 * devid)); + udma_timing |= udma << (4 * devid); + pci_write_config_word(dev, 0x4A, udma_timing); + } else { + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + u8 slave_data; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + control = 3; /* IORDY|TIME1 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + if (adev->devno) { /* Slave */ + master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ + master_data |= control << 4; + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= (0x0F + 0xE1 * ap->port_no); + /* Load the matching timing */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); + pci_write_config_byte(dev, 0x44, slave_data); + } else { /* Master */ + master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY + and master timing bits */ + master_data |= control; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + udma_enable &= ~(1 << devid); + pci_write_config_word(dev, master_port, master_data); + } + pci_write_config_byte(dev, 0x48, udma_enable); +} + +static struct scsi_host_template efar_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations efar_ops = { + .port_disable = ata_port_disable, + .set_piomode = efar_set_piomode, + .set_dmamode = efar_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = efar_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * efar_init_one - Register EFAR ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in efar_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info info = { + .sht = &efar_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma1-2 */ + .udma_mask = 0x0f, /* UDMA 66 */ + .port_ops = &efar_ops, + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id efar_pci_tbl[] = { + { 0x1055, 0x9130, PCI_ANY_ID, PCI_ANY_ID, }, + { } /* terminate list */ +}; + +static struct pci_driver efar_pci_driver = { + .name = DRV_NAME, + .id_table = efar_pci_tbl, + .probe = efar_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init efar_init(void) +{ + return pci_register_driver(&efar_pci_driver); +} + +static void __exit efar_exit(void) +{ + pci_unregister_driver(&efar_pci_driver); +} + + +module_init(efar_init); +module_exit(efar_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for EFAR PIIX clones"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, efar_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c new file mode 100644 index 0000000..94bb1df --- /dev/null +++ b/drivers/ata/pata_hpt366.c @@ -0,0 +1,478 @@ +/* + * Libata driver for the highpoint 366 and 368 UDMA66 ATA controllers. + * + * This driver is heavily based upon: + * + * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * + * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> + * Portions Copyright (C) 2001 Sun Microsystems, Inc. + * Portions Copyright (C) 2003 Red Hat Inc + * + * + * TODO + * Maybe PLL mode + * Look into engine reset on timeout errors. Should not be + * required. + */ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_hpt366" +#define DRV_VERSION "0.5" + +struct hpt_clock { + u8 xfer_speed; + u32 timing; +}; + +/* key for bus clock timings + * bit + * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file + * register access. + * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file + * register access. + * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. + * during task file register access. + * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA + * xfer. + * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task + * register access. + * 28 UDMA enable + * 29 DMA enable + * 30 PIO_MST enable. if set, the chip is in bus master mode during + * PIO. + * 31 FIFO enable. + */ + +static const struct hpt_clock hpt366_40[] = { + { XFER_UDMA_4, 0x900fd943 }, + { XFER_UDMA_3, 0x900ad943 }, + { XFER_UDMA_2, 0x900bd943 }, + { XFER_UDMA_1, 0x9008d943 }, + { XFER_UDMA_0, 0x9008d943 }, + + { XFER_MW_DMA_2, 0xa008d943 }, + { XFER_MW_DMA_1, 0xa010d955 }, + { XFER_MW_DMA_0, 0xa010d9fc }, + + { XFER_PIO_4, 0xc008d963 }, + { XFER_PIO_3, 0xc010d974 }, + { XFER_PIO_2, 0xc010d997 }, + { XFER_PIO_1, 0xc010d9c7 }, + { XFER_PIO_0, 0xc018d9d9 }, + { 0, 0x0120d9d9 } +}; + +static const struct hpt_clock hpt366_33[] = { + { XFER_UDMA_4, 0x90c9a731 }, + { XFER_UDMA_3, 0x90cfa731 }, + { XFER_UDMA_2, 0x90caa731 }, + { XFER_UDMA_1, 0x90cba731 }, + { XFER_UDMA_0, 0x90c8a731 }, + + { XFER_MW_DMA_2, 0xa0c8a731 }, + { XFER_MW_DMA_1, 0xa0c8a732 }, /* 0xa0c8a733 */ + { XFER_MW_DMA_0, 0xa0c8a797 }, + + { XFER_PIO_4, 0xc0c8a731 }, + { XFER_PIO_3, 0xc0c8a742 }, + { XFER_PIO_2, 0xc0d0a753 }, + { XFER_PIO_1, 0xc0d0a7a3 }, /* 0xc0d0a793 */ + { XFER_PIO_0, 0xc0d0a7aa }, /* 0xc0d0a7a7 */ + { 0, 0x0120a7a7 } +}; + +static const struct hpt_clock hpt366_25[] = { + { XFER_UDMA_4, 0x90c98521 }, + { XFER_UDMA_3, 0x90cf8521 }, + { XFER_UDMA_2, 0x90cf8521 }, + { XFER_UDMA_1, 0x90cb8521 }, + { XFER_UDMA_0, 0x90cb8521 }, + + { XFER_MW_DMA_2, 0xa0ca8521 }, + { XFER_MW_DMA_1, 0xa0ca8532 }, + { XFER_MW_DMA_0, 0xa0ca8575 }, + + { XFER_PIO_4, 0xc0ca8521 }, + { XFER_PIO_3, 0xc0ca8532 }, + { XFER_PIO_2, 0xc0ca8542 }, + { XFER_PIO_1, 0xc0d08572 }, + { XFER_PIO_0, 0xc0d08585 }, + { 0, 0x01208585 } +}; + +static const char *bad_ata33[] = { + "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2", + "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", + "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", + "Maxtor 90510D4", + "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2", + "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", + "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", + NULL +}; + +static const char *bad_ata66_4[] = { + "IBM-DTLA-307075", + "IBM-DTLA-307060", + "IBM-DTLA-307045", + "IBM-DTLA-307030", + "IBM-DTLA-307020", + "IBM-DTLA-307015", + "IBM-DTLA-305040", + "IBM-DTLA-305030", + "IBM-DTLA-305020", + "IC35L010AVER07-0", + "IC35L020AVER07-0", + "IC35L030AVER07-0", + "IC35L040AVER07-0", + "IC35L060AVER07-0", + "WDC AC310200R", + NULL +}; + +static const char *bad_ata66_3[] = { + "WDC AC310200R", + NULL +}; + +static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, const char *list[]) +{ + unsigned char model_num[40]; + char *s; + unsigned int len; + int i = 0; + + ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); + s = &model_num[0]; + len = strnlen(s, sizeof(model_num)); + + /* ATAPI specifies that empty space is blank-filled; remove blanks */ + while ((len > 0) && (s[len - 1] == ' ')) { + len--; + s[len] = 0; + } + + while(list[i] != NULL) { + if (!strncmp(list[i], s, len)) { + printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", + modestr, list[i]); + return 1; + } + i++; + } + return 0; +} + +/** + * hpt366_filter - mode selection filter + * @ap: ATA interface + * @adev: ATA device + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + if (adev->class == ATA_DEV_ATA) { + if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33)) + mask &= ~ATA_MASK_UDMA; + if (hpt_dma_blacklisted(adev, "UDMA3", bad_ata66_3)) + mask &= ~(0x07 << ATA_SHIFT_UDMA); + if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4)) + mask &= ~(0x0F << ATA_SHIFT_UDMA); + } + return ata_pci_default_filter(ap, adev, mask); +} + +/** + * hpt36x_find_mode - reset the hpt36x bus + * @ap: ATA port + * @speed: transfer mode + * + * Return the 32bit register programming information for this channel + * that matches the speed provided. + */ + +static u32 hpt36x_find_mode(struct ata_port *ap, int speed) +{ + struct hpt_clock *clocks = ap->host->private_data; + + while(clocks->xfer_speed) { + if (clocks->xfer_speed == speed) + return clocks->timing; + clocks++; + } + BUG(); + return 0xffffffffU; /* silence compiler warning */ +} + +static int hpt36x_pre_reset(struct ata_port *ap) +{ + u8 ata66; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x5A, &ata66); + if (ata66 & (1 << ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * hpt36x_error_handler - reset the hpt36x bus + * @ap: ATA port to reset + * + * Perform the reset handling for the 366/368 + */ + +static void hpt36x_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, hpt36x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * hpt366_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + if (fast & 0x80) { + fast &= ~0x80; + pci_write_config_byte(pdev, addr2, fast); + } + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt36x_find_mode(ap, adev->pio_mode); + mode &= ~0x8000000; /* No FIFO in PIO */ + mode &= ~0x30070000; /* Leave config bits alone */ + reg &= 0x30070000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt366_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + */ + +static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + if (fast & 0x80) { + fast &= ~0x80; + pci_write_config_byte(pdev, addr2, fast); + } + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt36x_find_mode(ap, adev->dma_mode); + mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ + mode &= ~0xC0000000; /* Leave config bits alone */ + reg &= 0xC0000000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +static struct scsi_host_template hpt36x_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +/* + * Configuration for HPT366/68 + */ + +static struct ata_port_operations hpt366_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt366_set_piomode, + .set_dmamode = hpt366_set_dmamode, + .mode_filter = hpt366_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt36x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * hpt36x_init_one - Initialise an HPT366/368 + * @dev: PCI device + * @id: Entry in match table + * + * Initialise an HPT36x device. There are some interesting complications + * here. Firstly the chip may report 366 and be one of several variants. + * Secondly all the timings depend on the clock for the chip which we must + * detect and look up + * + * This is the known chip mappings. It may be missing a couple of later + * releases. + * + * Chip version PCI Rev Notes + * HPT366 4 (HPT366) 0 UDMA66 + * HPT366 4 (HPT366) 1 UDMA66 + * HPT368 4 (HPT366) 2 UDMA66 + * HPT37x/30x 4 (HPT366) 3+ Other driver + * + */ + +static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info_hpt366 = { + .sht = &hpt36x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, + .port_ops = &hpt366_port_ops + }; + struct ata_port_info *port_info[2] = {&info_hpt366, &info_hpt366}; + + u32 class_rev; + u32 reg1; + u8 drive_fast; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xFF; + + /* May be a later chip in disguise. Check */ + /* Newer chips are not in the HPT36x driver. Ignore them */ + if (class_rev > 2) + return -ENODEV; + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); + pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); + pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + + pci_read_config_byte(dev, 0x51, &drive_fast); + if (drive_fast & 0x80) + pci_write_config_byte(dev, 0x51, drive_fast & ~0x80); + + pci_read_config_dword(dev, 0x40, ®1); + + /* PCI clocking determines the ATA timing values to use */ + /* info_hpt366 is safe against re-entry so we can scribble on it */ + switch(reg1 & 0x700) { + case 5: + info_hpt366.private_data = &hpt366_40; + break; + case 9: + info_hpt366.private_data = &hpt366_25; + break; + default: + info_hpt366.private_data = &hpt366_33; + break; + } + /* Now kick off ATA set up */ + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id hpt36x[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366), }, + { 0, }, +}; + +static struct pci_driver hpt36x_pci_driver = { + .name = DRV_NAME, + .id_table = hpt36x, + .probe = hpt36x_init_one, + .remove = ata_pci_remove_one +}; + +static int __init hpt36x_init(void) +{ + return pci_register_driver(&hpt36x_pci_driver); +} + + +static void __exit hpt36x_exit(void) +{ + pci_unregister_driver(&hpt36x_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT366/368"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt36x); +MODULE_VERSION(DRV_VERSION); + +module_init(hpt36x_init); +module_exit(hpt36x_exit); diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c new file mode 100644 index 0000000..532a792 --- /dev/null +++ b/drivers/ata/pata_hpt37x.c @@ -0,0 +1,1257 @@ +/* + * Libata driver for the highpoint 37x and 30x UDMA66 ATA controllers. + * + * This driver is heavily based upon: + * + * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * + * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> + * Portions Copyright (C) 2001 Sun Microsystems, Inc. + * Portions Copyright (C) 2003 Red Hat Inc + * + * TODO + * PLL mode + * Look into engine reset on timeout errors. Should not be + * required. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_hpt37x" +#define DRV_VERSION "0.5" + +struct hpt_clock { + u8 xfer_speed; + u32 timing; +}; + +struct hpt_chip { + const char *name; + unsigned int base; + struct hpt_clock const *clocks[4]; +}; + +/* key for bus clock timings + * bit + * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file + * register access. + * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file + * register access. + * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. + * during task file register access. + * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA + * xfer. + * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task + * register access. + * 28 UDMA enable + * 29 DMA enable + * 30 PIO_MST enable. if set, the chip is in bus master mode during + * PIO. + * 31 FIFO enable. + */ + +/* from highpoint documentation. these are old values */ +static const struct hpt_clock hpt370_timings_33[] = { +/* { XFER_UDMA_5, 0x1A85F442, 0x16454e31 }, */ + { XFER_UDMA_5, 0x16454e31 }, + { XFER_UDMA_4, 0x16454e31 }, + { XFER_UDMA_3, 0x166d4e31 }, + { XFER_UDMA_2, 0x16494e31 }, + { XFER_UDMA_1, 0x164d4e31 }, + { XFER_UDMA_0, 0x16514e31 }, + + { XFER_MW_DMA_2, 0x26514e21 }, + { XFER_MW_DMA_1, 0x26514e33 }, + { XFER_MW_DMA_0, 0x26514e97 }, + + { XFER_PIO_4, 0x06514e21 }, + { XFER_PIO_3, 0x06514e22 }, + { XFER_PIO_2, 0x06514e33 }, + { XFER_PIO_1, 0x06914e43 }, + { XFER_PIO_0, 0x06914e57 }, + { 0, 0x06514e57 } +}; + +static const struct hpt_clock hpt370_timings_66[] = { + { XFER_UDMA_5, 0x14846231 }, + { XFER_UDMA_4, 0x14886231 }, + { XFER_UDMA_3, 0x148c6231 }, + { XFER_UDMA_2, 0x148c6231 }, + { XFER_UDMA_1, 0x14906231 }, + { XFER_UDMA_0, 0x14986231 }, + + { XFER_MW_DMA_2, 0x26514e21 }, + { XFER_MW_DMA_1, 0x26514e33 }, + { XFER_MW_DMA_0, 0x26514e97 }, + + { XFER_PIO_4, 0x06514e21 }, + { XFER_PIO_3, 0x06514e22 }, + { XFER_PIO_2, 0x06514e33 }, + { XFER_PIO_1, 0x06914e43 }, + { XFER_PIO_0, 0x06914e57 }, + { 0, 0x06514e57 } +}; + +/* these are the current (4 sep 2001) timings from highpoint */ +static const struct hpt_clock hpt370a_timings_33[] = { + { XFER_UDMA_5, 0x12446231 }, + { XFER_UDMA_4, 0x12446231 }, + { XFER_UDMA_3, 0x126c6231 }, + { XFER_UDMA_2, 0x12486231 }, + { XFER_UDMA_1, 0x124c6233 }, + { XFER_UDMA_0, 0x12506297 }, + + { XFER_MW_DMA_2, 0x22406c31 }, + { XFER_MW_DMA_1, 0x22406c33 }, + { XFER_MW_DMA_0, 0x22406c97 }, + + { XFER_PIO_4, 0x06414e31 }, + { XFER_PIO_3, 0x06414e42 }, + { XFER_PIO_2, 0x06414e53 }, + { XFER_PIO_1, 0x06814e93 }, + { XFER_PIO_0, 0x06814ea7 }, + { 0, 0x06814ea7 } +}; + +/* 2x 33MHz timings */ +static const struct hpt_clock hpt370a_timings_66[] = { + { XFER_UDMA_5, 0x1488e673 }, + { XFER_UDMA_4, 0x1488e673 }, + { XFER_UDMA_3, 0x1498e673 }, + { XFER_UDMA_2, 0x1490e673 }, + { XFER_UDMA_1, 0x1498e677 }, + { XFER_UDMA_0, 0x14a0e73f }, + + { XFER_MW_DMA_2, 0x2480fa73 }, + { XFER_MW_DMA_1, 0x2480fa77 }, + { XFER_MW_DMA_0, 0x2480fb3f }, + + { XFER_PIO_4, 0x0c82be73 }, + { XFER_PIO_3, 0x0c82be95 }, + { XFER_PIO_2, 0x0c82beb7 }, + { XFER_PIO_1, 0x0d02bf37 }, + { XFER_PIO_0, 0x0d02bf5f }, + { 0, 0x0d02bf5f } +}; + +static const struct hpt_clock hpt370a_timings_50[] = { + { XFER_UDMA_5, 0x12848242 }, + { XFER_UDMA_4, 0x12ac8242 }, + { XFER_UDMA_3, 0x128c8242 }, + { XFER_UDMA_2, 0x120c8242 }, + { XFER_UDMA_1, 0x12148254 }, + { XFER_UDMA_0, 0x121882ea }, + + { XFER_MW_DMA_2, 0x22808242 }, + { XFER_MW_DMA_1, 0x22808254 }, + { XFER_MW_DMA_0, 0x228082ea }, + + { XFER_PIO_4, 0x0a81f442 }, + { XFER_PIO_3, 0x0a81f443 }, + { XFER_PIO_2, 0x0a81f454 }, + { XFER_PIO_1, 0x0ac1f465 }, + { XFER_PIO_0, 0x0ac1f48a }, + { 0, 0x0ac1f48a } +}; + +static const struct hpt_clock hpt372_timings_33[] = { + { XFER_UDMA_6, 0x1c81dc62 }, + { XFER_UDMA_5, 0x1c6ddc62 }, + { XFER_UDMA_4, 0x1c8ddc62 }, + { XFER_UDMA_3, 0x1c8edc62 }, /* checkme */ + { XFER_UDMA_2, 0x1c91dc62 }, + { XFER_UDMA_1, 0x1c9adc62 }, /* checkme */ + { XFER_UDMA_0, 0x1c82dc62 }, /* checkme */ + + { XFER_MW_DMA_2, 0x2c829262 }, + { XFER_MW_DMA_1, 0x2c829266 }, /* checkme */ + { XFER_MW_DMA_0, 0x2c82922e }, /* checkme */ + + { XFER_PIO_4, 0x0c829c62 }, + { XFER_PIO_3, 0x0c829c84 }, + { XFER_PIO_2, 0x0c829ca6 }, + { XFER_PIO_1, 0x0d029d26 }, + { XFER_PIO_0, 0x0d029d5e }, + { 0, 0x0d029d5e } +}; + +static const struct hpt_clock hpt372_timings_50[] = { + { XFER_UDMA_5, 0x12848242 }, + { XFER_UDMA_4, 0x12ac8242 }, + { XFER_UDMA_3, 0x128c8242 }, + { XFER_UDMA_2, 0x120c8242 }, + { XFER_UDMA_1, 0x12148254 }, + { XFER_UDMA_0, 0x121882ea }, + + { XFER_MW_DMA_2, 0x22808242 }, + { XFER_MW_DMA_1, 0x22808254 }, + { XFER_MW_DMA_0, 0x228082ea }, + + { XFER_PIO_4, 0x0a81f442 }, + { XFER_PIO_3, 0x0a81f443 }, + { XFER_PIO_2, 0x0a81f454 }, + { XFER_PIO_1, 0x0ac1f465 }, + { XFER_PIO_0, 0x0ac1f48a }, + { 0, 0x0a81f443 } +}; + +static const struct hpt_clock hpt372_timings_66[] = { + { XFER_UDMA_6, 0x1c869c62 }, + { XFER_UDMA_5, 0x1cae9c62 }, + { XFER_UDMA_4, 0x1c8a9c62 }, + { XFER_UDMA_3, 0x1c8e9c62 }, + { XFER_UDMA_2, 0x1c929c62 }, + { XFER_UDMA_1, 0x1c9a9c62 }, + { XFER_UDMA_0, 0x1c829c62 }, + + { XFER_MW_DMA_2, 0x2c829c62 }, + { XFER_MW_DMA_1, 0x2c829c66 }, + { XFER_MW_DMA_0, 0x2c829d2e }, + + { XFER_PIO_4, 0x0c829c62 }, + { XFER_PIO_3, 0x0c829c84 }, + { XFER_PIO_2, 0x0c829ca6 }, + { XFER_PIO_1, 0x0d029d26 }, + { XFER_PIO_0, 0x0d029d5e }, + { 0, 0x0d029d26 } +}; + +static const struct hpt_clock hpt374_timings_33[] = { + { XFER_UDMA_6, 0x12808242 }, + { XFER_UDMA_5, 0x12848242 }, + { XFER_UDMA_4, 0x12ac8242 }, + { XFER_UDMA_3, 0x128c8242 }, + { XFER_UDMA_2, 0x120c8242 }, + { XFER_UDMA_1, 0x12148254 }, + { XFER_UDMA_0, 0x121882ea }, + + { XFER_MW_DMA_2, 0x22808242 }, + { XFER_MW_DMA_1, 0x22808254 }, + { XFER_MW_DMA_0, 0x228082ea }, + + { XFER_PIO_4, 0x0a81f442 }, + { XFER_PIO_3, 0x0a81f443 }, + { XFER_PIO_2, 0x0a81f454 }, + { XFER_PIO_1, 0x0ac1f465 }, + { XFER_PIO_0, 0x0ac1f48a }, + { 0, 0x06814e93 } +}; + +static const struct hpt_chip hpt370 = { + "HPT370", + 48, + { + hpt370_timings_33, + NULL, + NULL, + hpt370_timings_66 + } +}; + +static const struct hpt_chip hpt370a = { + "HPT370A", + 48, + { + hpt370a_timings_33, + NULL, + hpt370a_timings_50, + hpt370a_timings_66 + } +}; + +static const struct hpt_chip hpt372 = { + "HPT372", + 55, + { + hpt372_timings_33, + NULL, + hpt372_timings_50, + hpt372_timings_66 + } +}; + +static const struct hpt_chip hpt302 = { + "HPT302", + 66, + { + hpt372_timings_33, + NULL, + hpt372_timings_50, + hpt372_timings_66 + } +}; + +static const struct hpt_chip hpt371 = { + "HPT371", + 66, + { + hpt372_timings_33, + NULL, + hpt372_timings_50, + hpt372_timings_66 + } +}; + +static const struct hpt_chip hpt372a = { + "HPT372A", + 66, + { + hpt372_timings_33, + NULL, + hpt372_timings_50, + hpt372_timings_66 + } +}; + +static const struct hpt_chip hpt374 = { + "HPT374", + 48, + { + hpt374_timings_33, + NULL, + NULL, + NULL + } +}; + +/** + * hpt37x_find_mode - reset the hpt37x bus + * @ap: ATA port + * @speed: transfer mode + * + * Return the 32bit register programming information for this channel + * that matches the speed provided. + */ + +static u32 hpt37x_find_mode(struct ata_port *ap, int speed) +{ + struct hpt_clock *clocks = ap->host->private_data; + + while(clocks->xfer_speed) { + if (clocks->xfer_speed == speed) + return clocks->timing; + clocks++; + } + BUG(); + return 0xffffffffU; /* silence compiler warning */ +} + +static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, const char *list[]) +{ + unsigned char model_num[40]; + char *s; + unsigned int len; + int i = 0; + + ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, + sizeof(model_num)); + s = &model_num[0]; + len = strnlen(s, sizeof(model_num)); + + /* ATAPI specifies that empty space is blank-filled; remove blanks */ + while ((len > 0) && (s[len - 1] == ' ')) { + len--; + s[len] = 0; + } + + while(list[i] != NULL) { + if (!strncmp(list[i], s, len)) { + printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", + modestr, list[i]); + return 1; + } + i++; + } + return 0; +} + +static const char *bad_ata33[] = { + "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2", + "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", + "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", + "Maxtor 90510D4", + "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2", + "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", + "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", + NULL +}; + +static const char *bad_ata100_5[] = { + "IBM-DTLA-307075", + "IBM-DTLA-307060", + "IBM-DTLA-307045", + "IBM-DTLA-307030", + "IBM-DTLA-307020", + "IBM-DTLA-307015", + "IBM-DTLA-305040", + "IBM-DTLA-305030", + "IBM-DTLA-305020", + "IC35L010AVER07-0", + "IC35L020AVER07-0", + "IC35L030AVER07-0", + "IC35L040AVER07-0", + "IC35L060AVER07-0", + "WDC AC310200R", + NULL +}; + +/** + * hpt370_filter - mode selection filter + * @ap: ATA interface + * @adev: ATA device + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + if (adev->class != ATA_DEV_ATA) { + if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33)) + mask &= ~ATA_MASK_UDMA; + if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5)) + mask &= ~(0x1F << ATA_SHIFT_UDMA); + } + return ata_pci_default_filter(ap, adev, mask); +} + +/** + * hpt370a_filter - mode selection filter + * @ap: ATA interface + * @adev: ATA device + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long hpt370a_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + if (adev->class != ATA_DEV_ATA) { + if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5)) + mask &= ~ (0x1F << ATA_SHIFT_UDMA); + } + return ata_pci_default_filter(ap, adev, mask); +} + +/** + * hpt37x_pre_reset - reset the hpt37x bus + * @ap: ATA port to reset + * + * Perform the initial reset handling for the 370/372 and 374 func 0 + */ + +static int hpt37x_pre_reset(struct ata_port *ap) +{ + u8 scr2, ata66; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x5B, &scr2); + pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01); + /* Cable register now active */ + pci_read_config_byte(pdev, 0x5A, &ata66); + /* Restore state */ + pci_write_config_byte(pdev, 0x5B, scr2); + + if (ata66 & (1 << ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + + /* Reset the state machine */ + pci_write_config_byte(pdev, 0x50, 0x37); + pci_write_config_byte(pdev, 0x54, 0x37); + udelay(100); + + return ata_std_prereset(ap); +} + +/** + * hpt37x_error_handler - reset the hpt374 + * @ap: ATA port to reset + * + * Perform probe for HPT37x, except for HPT374 channel 2 + */ + +static void hpt37x_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +static int hpt374_pre_reset(struct ata_port *ap) +{ + u16 mcr3, mcr6; + u8 ata66; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + /* Do the extra channel work */ + pci_read_config_word(pdev, 0x52, &mcr3); + pci_read_config_word(pdev, 0x56, &mcr6); + /* Set bit 15 of 0x52 to enable TCBLID as input + Set bit 15 of 0x56 to enable FCBLID as input + */ + pci_write_config_word(pdev, 0x52, mcr3 | 0x8000); + pci_write_config_word(pdev, 0x56, mcr6 | 0x8000); + pci_read_config_byte(pdev, 0x5A, &ata66); + /* Reset TCBLID/FCBLID to output */ + pci_write_config_word(pdev, 0x52, mcr3); + pci_write_config_word(pdev, 0x56, mcr6); + + if (ata66 & (1 << ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + + /* Reset the state machine */ + pci_write_config_byte(pdev, 0x50, 0x37); + pci_write_config_byte(pdev, 0x54, 0x37); + udelay(100); + + return ata_std_prereset(ap); +} + +/** + * hpt374_error_handler - reset the hpt374 + * @classes: + * + * The 374 cable detect is a little different due to the extra + * channels. The function 0 channels work like usual but function 1 + * is special + */ + +static void hpt374_error_handler(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!(PCI_FUNC(pdev->devfn) & 1)) + hpt37x_error_handler(ap); + else + ata_bmdma_drive_eh(ap, hpt374_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * hpt370_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x02; + fast |= 0x01; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt37x_find_mode(ap, adev->pio_mode); + mode &= ~0x8000000; /* No FIFO in PIO */ + mode &= ~0x30070000; /* Leave config bits alone */ + reg &= 0x30070000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt370_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + */ + +static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x02; + fast |= 0x01; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt37x_find_mode(ap, adev->dma_mode); + mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ + mode &= ~0xC0000000; /* Leave config bits alone */ + reg &= 0xC0000000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt370_bmdma_start - DMA engine begin + * @qc: ATA command + * + * The 370 and 370A want us to reset the DMA engine each time we + * use it. The 372 and later are fine. + */ + +static void hpt370_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); + udelay(10); + ata_bmdma_start(qc); +} + +/** + * hpt370_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Work around the HPT370 DMA engine. + */ + +static void hpt370_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 dma_stat = inb(ap->ioaddr.bmdma_addr + 2); + u8 dma_cmd; + unsigned long bmdma = ap->ioaddr.bmdma_addr; + + if (dma_stat & 0x01) { + udelay(20); + dma_stat = inb(bmdma + 2); + } + if (dma_stat & 0x01) { + /* Clear the engine */ + pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); + udelay(10); + /* Stop DMA */ + dma_cmd = inb(bmdma ); + outb(dma_cmd & 0xFE, bmdma); + /* Clear Error */ + dma_stat = inb(bmdma + 2); + outb(dma_stat | 0x06 , bmdma + 2); + /* Clear the engine */ + pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); + udelay(10); + } + ata_bmdma_stop(qc); +} + +/** + * hpt372_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x07; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt37x_find_mode(ap, adev->pio_mode); + + printk("Find mode for %d reports %X\n", adev->pio_mode, mode); + mode &= ~0x80000000; /* No FIFO in PIO */ + mode &= ~0x30070000; /* Leave config bits alone */ + reg &= 0x30070000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt372_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + */ + +static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x07; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt37x_find_mode(ap, adev->dma_mode); + printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode); + mode &= ~0xC0000000; /* Leave config bits alone */ + mode |= 0x80000000; /* FIFO in MWDMA or UDMA */ + reg &= 0xC0000000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt37x_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Clean up after the HPT372 and later DMA engine + */ + +static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int mscreg = 0x50 + 2 * ap->port_no; + u8 bwsr_stat, msc_stat; + + pci_read_config_byte(pdev, 0x6A, &bwsr_stat); + pci_read_config_byte(pdev, mscreg, &msc_stat); + if (bwsr_stat & (1 << ap->port_no)) + pci_write_config_byte(pdev, mscreg, msc_stat | 0x30); + ata_bmdma_stop(qc); +} + + +static struct scsi_host_template hpt37x_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +/* + * Configuration for HPT370 + */ + +static struct ata_port_operations hpt370_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt370_set_piomode, + .set_dmamode = hpt370_set_dmamode, + .mode_filter = hpt370_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt37x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = hpt370_bmdma_start, + .bmdma_stop = hpt370_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Configuration for HPT370A. Close to 370 but less filters + */ + +static struct ata_port_operations hpt370a_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt370_set_piomode, + .set_dmamode = hpt370_set_dmamode, + .mode_filter = hpt370a_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt37x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = hpt370_bmdma_start, + .bmdma_stop = hpt370_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Configuration for HPT372, HPT371, HPT302. Slightly different PIO + * and DMA mode setting functionality. + */ + +static struct ata_port_operations hpt372_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt372_set_piomode, + .set_dmamode = hpt372_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt37x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = hpt37x_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Configuration for HPT374. Mode setting works like 372 and friends + * but we have a different cable detection procedure. + */ + +static struct ata_port_operations hpt374_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt372_set_piomode, + .set_dmamode = hpt372_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt374_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = hpt37x_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * htp37x_clock_slot - Turn timing to PC clock entry + * @freq: Reported frequency timing + * @base: Base timing + * + * Turn the timing data intoa clock slot (0 for 33, 1 for 40, 2 for 50 + * and 3 for 66Mhz) + */ + +static int hpt37x_clock_slot(unsigned int freq, unsigned int base) +{ + unsigned int f = (base * freq) / 192; /* Mhz */ + if (f < 40) + return 0; /* 33Mhz slot */ + if (f < 45) + return 1; /* 40Mhz slot */ + if (f < 55) + return 2; /* 50Mhz slot */ + return 3; /* 60Mhz slot */ +} + +/** + * hpt37x_calibrate_dpll - Calibrate the DPLL loop + * @dev: PCI device + * + * Perform a calibration cycle on the HPT37x DPLL. Returns 1 if this + * succeeds + */ + +static int hpt37x_calibrate_dpll(struct pci_dev *dev) +{ + u8 reg5b; + u32 reg5c; + int tries; + + for(tries = 0; tries < 0x5000; tries++) { + udelay(50); + pci_read_config_byte(dev, 0x5b, ®5b); + if (reg5b & 0x80) { + /* See if it stays set */ + for(tries = 0; tries < 0x1000; tries ++) { + pci_read_config_byte(dev, 0x5b, ®5b); + /* Failed ? */ + if ((reg5b & 0x80) == 0) + return 0; + } + /* Turn off tuning, we have the DPLL set */ + pci_read_config_dword(dev, 0x5c, ®5c); + pci_write_config_dword(dev, 0x5c, reg5c & ~ 0x100); + return 1; + } + } + /* Never went stable */ + return 0; +} +/** + * hpt37x_init_one - Initialise an HPT37X/302 + * @dev: PCI device + * @id: Entry in match table + * + * Initialise an HPT37x device. There are some interesting complications + * here. Firstly the chip may report 366 and be one of several variants. + * Secondly all the timings depend on the clock for the chip which we must + * detect and look up + * + * This is the known chip mappings. It may be missing a couple of later + * releases. + * + * Chip version PCI Rev Notes + * HPT366 4 (HPT366) 0 Other driver + * HPT366 4 (HPT366) 1 Other driver + * HPT368 4 (HPT366) 2 Other driver + * HPT370 4 (HPT366) 3 UDMA100 + * HPT370A 4 (HPT366) 4 UDMA100 + * HPT372 4 (HPT366) 5 UDMA133 (1) + * HPT372N 4 (HPT366) 6 Other driver + * HPT372A 5 (HPT372) 1 UDMA133 (1) + * HPT372N 5 (HPT372) 2 Other driver + * HPT302 6 (HPT302) 1 UDMA133 + * HPT302N 6 (HPT302) 2 Other driver + * HPT371 7 (HPT371) * UDMA133 + * HPT374 8 (HPT374) * UDMA133 4 channel + * HPT372N 9 (HPT372N) * Other driver + * + * (1) UDMA133 support depends on the bus clock + */ + +static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + /* HPT370 - UDMA100 */ + static struct ata_port_info info_hpt370 = { + .sht = &hpt37x_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &hpt370_port_ops + }; + /* HPT370A - UDMA100 */ + static struct ata_port_info info_hpt370a = { + .sht = &hpt37x_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &hpt370a_port_ops + }; + /* HPT371, 372 and friends - UDMA133 */ + static struct ata_port_info info_hpt372 = { + .sht = &hpt37x_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &hpt372_port_ops + }; + /* HPT371, 372 and friends - UDMA100 at 50MHz clock */ + static struct ata_port_info info_hpt372_50 = { + .sht = &hpt37x_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &hpt372_port_ops + }; + /* HPT374 - UDMA133 */ + static struct ata_port_info info_hpt374 = { + .sht = &hpt37x_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &hpt374_port_ops + }; + + static const int MHz[4] = { 33, 40, 50, 66 }; + + struct ata_port_info *port_info[2]; + struct ata_port_info *port; + + u8 irqmask; + u32 class_rev; + u32 freq; + + const struct hpt_chip *chip_table; + int clock_slot; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xFF; + + if (dev->device == PCI_DEVICE_ID_TTI_HPT366) { + /* May be a later chip in disguise. Check */ + /* Older chips are in the HPT366 driver. Ignore them */ + if (class_rev < 3) + return -ENODEV; + /* N series chips have their own driver. Ignore */ + if (class_rev == 6) + return -ENODEV; + + switch(class_rev) { + case 3: + port = &info_hpt370; + chip_table = &hpt370; + break; + case 4: + port = &info_hpt370a; + chip_table = &hpt370a; + break; + case 5: + port = &info_hpt372; + chip_table = &hpt372; + break; + default: + printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype please report (%d).\n", class_rev); + return -ENODEV; + } + } else { + switch(dev->device) { + case PCI_DEVICE_ID_TTI_HPT372: + /* 372N if rev >= 2*/ + if (class_rev >= 2) + return -ENODEV; + port = &info_hpt372; + chip_table = &hpt372a; + break; + case PCI_DEVICE_ID_TTI_HPT302: + /* 302N if rev > 1 */ + if (class_rev > 1) + return -ENODEV; + port = &info_hpt372; + /* Check this */ + chip_table = &hpt302; + break; + case PCI_DEVICE_ID_TTI_HPT371: + port = &info_hpt372; + chip_table = &hpt371; + break; + case PCI_DEVICE_ID_TTI_HPT374: + chip_table = &hpt374; + port = &info_hpt374; + break; + default: + printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device); + return -ENODEV; + } + } + /* Ok so this is a chip we support */ + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); + pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); + pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + + pci_read_config_byte(dev, 0x5A, &irqmask); + irqmask &= ~0x10; + pci_write_config_byte(dev, 0x5a, irqmask); + + /* + * default to pci clock. make sure MA15/16 are set to output + * to prevent drives having problems with 40-pin cables. Needed + * for some drives such as IBM-DTLA which will not enter ready + * state on reset when PDIAG is a input. + */ + + pci_write_config_byte(dev, 0x5b, 0x23); + + pci_read_config_dword(dev, 0x70, &freq); + if ((freq >> 12) != 0xABCDE) { + int i; + u8 sr; + u32 total = 0; + + printk(KERN_WARNING "pata_hpt37x: BIOS has not set timing clocks.\n"); + + /* This is the process the HPT371 BIOS is reported to use */ + for(i = 0; i < 128; i++) { + pci_read_config_byte(dev, 0x78, &sr); + total += sr; + udelay(15); + } + freq = total / 128; + } + freq &= 0x1FF; + + /* + * Turn the frequency check into a band and then find a timing + * table to match it. + */ + + clock_slot = hpt37x_clock_slot(freq, chip_table->base); + if (chip_table->clocks[clock_slot] == NULL) { + /* + * We need to try PLL mode instead + */ + unsigned int f_low = (MHz[clock_slot] * chip_table->base) / 192; + unsigned int f_high = f_low + 2; + int adjust; + + for(adjust = 0; adjust < 8; adjust++) { + if (hpt37x_calibrate_dpll(dev)) + break; + /* See if it'll settle at a fractionally different clock */ + if ((adjust & 3) == 3) { + f_low --; + f_high ++; + } + pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); + } + if (adjust == 8) { + printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n"); + return -ENODEV; + } + /* Check if this works for all cases */ + port->private_data = (void *)hpt370_timings_66; + + printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]); + } else { + port->private_data = (void *)chip_table->clocks[clock_slot]; + /* + * Perform a final fixup. The 371 and 372 clock determines + * if UDMA133 is available. + */ + + if (clock_slot == 2 && chip_table == &hpt372) { /* 50Mhz */ + printk(KERN_WARNING "pata_hpt37x: No UDMA133 support available with 50MHz bus clock.\n"); + if (port == &info_hpt372) + port = &info_hpt372_50; + else BUG(); + } + printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]); + } + port_info[0] = port_info[1] = port; + /* Now kick off ATA set up */ + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id hpt37x[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT371), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT374), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT302), }, + { 0, }, +}; + +static struct pci_driver hpt37x_pci_driver = { + .name = DRV_NAME, + .id_table = hpt37x, + .probe = hpt37x_init_one, + .remove = ata_pci_remove_one +}; + +static int __init hpt37x_init(void) +{ + return pci_register_driver(&hpt37x_pci_driver); +} + + +static void __exit hpt37x_exit(void) +{ + pci_unregister_driver(&hpt37x_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT37x/30x"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt37x); +MODULE_VERSION(DRV_VERSION); + +module_init(hpt37x_init); +module_exit(hpt37x_exit); diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c new file mode 100644 index 0000000..06c8db0 --- /dev/null +++ b/drivers/ata/pata_hpt3x2n.c @@ -0,0 +1,597 @@ +/* + * Libata driver for the highpoint 372N and 302N UDMA66 ATA controllers. + * + * This driver is heavily based upon: + * + * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * + * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> + * Portions Copyright (C) 2001 Sun Microsystems, Inc. + * Portions Copyright (C) 2003 Red Hat Inc + * + * + * TODO + * 371N + * Work out best PLL policy + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_hpt3x2n" +#define DRV_VERSION "0.3" + +enum { + HPT_PCI_FAST = (1 << 31), + PCI66 = (1 << 1), + USE_DPLL = (1 << 0) +}; + +struct hpt_clock { + u8 xfer_speed; + u32 timing; +}; + +struct hpt_chip { + const char *name; + struct hpt_clock *clocks[3]; +}; + +/* key for bus clock timings + * bit + * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW + * DMA. cycles = value + 1 + * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file + * register access. + * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file + * register access. + * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. + * during task file register access. + * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA + * xfer. + * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task + * register access. + * 28 UDMA enable + * 29 DMA enable + * 30 PIO_MST enable. if set, the chip is in bus master mode during + * PIO. + * 31 FIFO enable. + */ + +/* 66MHz DPLL clocks */ + +static struct hpt_clock hpt3x2n_clocks[] = { + { XFER_UDMA_7, 0x1c869c62 }, + { XFER_UDMA_6, 0x1c869c62 }, + { XFER_UDMA_5, 0x1c8a9c62 }, + { XFER_UDMA_4, 0x1c8a9c62 }, + { XFER_UDMA_3, 0x1c8e9c62 }, + { XFER_UDMA_2, 0x1c929c62 }, + { XFER_UDMA_1, 0x1c9a9c62 }, + { XFER_UDMA_0, 0x1c829c62 }, + + { XFER_MW_DMA_2, 0x2c829c62 }, + { XFER_MW_DMA_1, 0x2c829c66 }, + { XFER_MW_DMA_0, 0x2c829d2c }, + + { XFER_PIO_4, 0x0c829c62 }, + { XFER_PIO_3, 0x0c829c84 }, + { XFER_PIO_2, 0x0c829ca6 }, + { XFER_PIO_1, 0x0d029d26 }, + { XFER_PIO_0, 0x0d029d5e }, + { 0, 0x0d029d5e } +}; + +/** + * hpt3x2n_find_mode - reset the hpt3x2n bus + * @ap: ATA port + * @speed: transfer mode + * + * Return the 32bit register programming information for this channel + * that matches the speed provided. For the moment the clocks table + * is hard coded but easy to change. This will be needed if we use + * different DPLLs + */ + +static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed) +{ + struct hpt_clock *clocks = hpt3x2n_clocks; + + while(clocks->xfer_speed) { + if (clocks->xfer_speed == speed) + return clocks->timing; + clocks++; + } + BUG(); + return 0xffffffffU; /* silence compiler warning */ +} + +/** + * hpt3x2n_pre_reset - reset the hpt3x2n bus + * @ap: ATA port to reset + * + * Perform the initial reset handling for the 3x2n series controllers. + * Reset the hardware and state machine, obtain the cable type. + */ + +static int hpt3xn_pre_reset(struct ata_port *ap) +{ + u8 scr2, ata66; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x5B, &scr2); + pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01); + /* Cable register now active */ + pci_read_config_byte(pdev, 0x5A, &ata66); + /* Restore state */ + pci_write_config_byte(pdev, 0x5B, scr2); + + if (ata66 & (1 << ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + + /* Reset the state machine */ + pci_write_config_byte(pdev, 0x50, 0x37); + pci_write_config_byte(pdev, 0x54, 0x37); + udelay(100); + + return ata_std_prereset(ap); +} + +/** + * hpt3x2n_error_handler - probe the hpt3x2n bus + * @ap: ATA port to reset + * + * Perform the probe reset handling for the 3x2N + */ + +static void hpt3x2n_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, hpt3xn_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * hpt3x2n_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x07; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt3x2n_find_mode(ap, adev->pio_mode); + mode &= ~0x8000000; /* No FIFO in PIO */ + mode &= ~0x30070000; /* Leave config bits alone */ + reg &= 0x30070000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt3x2n_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + */ + +static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 addr1, addr2; + u32 reg; + u32 mode; + u8 fast; + + addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + addr2 = 0x51 + 4 * ap->port_no; + + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, addr2, &fast); + fast &= ~0x07; + pci_write_config_byte(pdev, addr2, fast); + + pci_read_config_dword(pdev, addr1, ®); + mode = hpt3x2n_find_mode(ap, adev->dma_mode); + mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ + mode &= ~0xC0000000; /* Leave config bits alone */ + reg &= 0xC0000000; /* Strip timing bits */ + pci_write_config_dword(pdev, addr1, reg | mode); +} + +/** + * hpt3x2n_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Clean up after the HPT3x2n and later DMA engine + */ + +static void hpt3x2n_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int mscreg = 0x50 + 2 * ap->port_no; + u8 bwsr_stat, msc_stat; + + pci_read_config_byte(pdev, 0x6A, &bwsr_stat); + pci_read_config_byte(pdev, mscreg, &msc_stat); + if (bwsr_stat & (1 << ap->port_no)) + pci_write_config_byte(pdev, mscreg, msc_stat | 0x30); + ata_bmdma_stop(qc); +} + +/** + * hpt3x2n_set_clock - clock control + * @ap: ATA port + * @source: 0x21 or 0x23 for PLL or PCI sourced clock + * + * Switch the ATA bus clock between the PLL and PCI clock sources + * while correctly isolating the bus and resetting internal logic + * + * We must use the DPLL for + * - writing + * - second channel UDMA7 (SATA ports) or higher + * - 66MHz PCI + * + * or we will underclock the device and get reduced performance. + */ + +static void hpt3x2n_set_clock(struct ata_port *ap, int source) +{ + unsigned long bmdma = ap->ioaddr.bmdma_addr; + + /* Tristate the bus */ + outb(0x80, bmdma+0x73); + outb(0x80, bmdma+0x77); + + /* Switch clock and reset channels */ + outb(source, bmdma+0x7B); + outb(0xC0, bmdma+0x79); + + /* Reset state machines */ + outb(0x37, bmdma+0x70); + outb(0x37, bmdma+0x74); + + /* Complete reset */ + outb(0x00, bmdma+0x79); + + /* Reconnect channels to bus */ + outb(0x00, bmdma+0x73); + outb(0x00, bmdma+0x77); +} + +/* Check if our partner interface is busy */ + +static int hpt3x2n_pair_idle(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct ata_port *pair = host->ports[ap->port_no ^ 1]; + + if (pair->hsm_task_state == HSM_ST_IDLE) + return 1; + return 0; +} + +static int hpt3x2n_use_dpll(struct ata_port *ap, int reading) +{ + long flags = (long)ap->host->private_data; + /* See if we should use the DPLL */ + if (reading == 0) + return USE_DPLL; /* Needed for write */ + if (flags & PCI66) + return USE_DPLL; /* Needed at 66Mhz */ + return 0; +} + +static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &qc->tf; + struct ata_port *ap = qc->ap; + int flags = (long)ap->host->private_data; + + if (hpt3x2n_pair_idle(ap)) { + int dpll = hpt3x2n_use_dpll(ap, (tf->flags & ATA_TFLAG_WRITE)); + if ((flags & USE_DPLL) != dpll) { + if (dpll == 1) + hpt3x2n_set_clock(ap, 0x21); + else + hpt3x2n_set_clock(ap, 0x23); + } + } + return ata_qc_issue_prot(qc); +} + +static struct scsi_host_template hpt3x2n_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +/* + * Configuration for HPT3x2n. + */ + +static struct ata_port_operations hpt3x2n_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt3x2n_set_piomode, + .set_dmamode = hpt3x2n_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt3x2n_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = hpt3x2n_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = hpt3x2n_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * hpt3xn_calibrate_dpll - Calibrate the DPLL loop + * @dev: PCI device + * + * Perform a calibration cycle on the HPT3xN DPLL. Returns 1 if this + * succeeds + */ + +static int hpt3xn_calibrate_dpll(struct pci_dev *dev) +{ + u8 reg5b; + u32 reg5c; + int tries; + + for(tries = 0; tries < 0x5000; tries++) { + udelay(50); + pci_read_config_byte(dev, 0x5b, ®5b); + if (reg5b & 0x80) { + /* See if it stays set */ + for(tries = 0; tries < 0x1000; tries ++) { + pci_read_config_byte(dev, 0x5b, ®5b); + /* Failed ? */ + if ((reg5b & 0x80) == 0) + return 0; + } + /* Turn off tuning, we have the DPLL set */ + pci_read_config_dword(dev, 0x5c, ®5c); + pci_write_config_dword(dev, 0x5c, reg5c & ~ 0x100); + return 1; + } + } + /* Never went stable */ + return 0; +} + +static int hpt3x2n_pci_clock(struct pci_dev *pdev) +{ + unsigned long freq; + u32 fcnt; + + pci_read_config_dword(pdev, 0x70/*CHECKME*/, &fcnt); + if ((fcnt >> 12) != 0xABCDE) { + printk(KERN_WARNING "hpt3xn: BIOS clock data not set.\n"); + return 33; /* Not BIOS set */ + } + fcnt &= 0x1FF; + + freq = (fcnt * 77) / 192; + + /* Clamp to bands */ + if (freq < 40) + return 33; + if (freq < 45) + return 40; + if (freq < 55) + return 50; + return 66; +} + +/** + * hpt3x2n_init_one - Initialise an HPT37X/302 + * @dev: PCI device + * @id: Entry in match table + * + * Initialise an HPT3x2n device. There are some interesting complications + * here. Firstly the chip may report 366 and be one of several variants. + * Secondly all the timings depend on the clock for the chip which we must + * detect and look up + * + * This is the known chip mappings. It may be missing a couple of later + * releases. + * + * Chip version PCI Rev Notes + * HPT372 4 (HPT366) 5 Other driver + * HPT372N 4 (HPT366) 6 UDMA133 + * HPT372 5 (HPT372) 1 Other driver + * HPT372N 5 (HPT372) 2 UDMA133 + * HPT302 6 (HPT302) * Other driver + * HPT302N 6 (HPT302) > 1 UDMA133 + * HPT371 7 (HPT371) * Other driver + * HPT371N 7 (HPT371) > 1 UDMA133 + * HPT374 8 (HPT374) * Other driver + * HPT372N 9 (HPT372N) * UDMA133 + * + * (1) UDMA133 support depends on the bus clock + * + * To pin down HPT371N + */ + +static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + /* HPT372N and friends - UDMA133 */ + static struct ata_port_info info = { + .sht = &hpt3x2n_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &hpt3x2n_port_ops + }; + struct ata_port_info *port_info[2]; + struct ata_port_info *port = &info; + + u8 irqmask; + u32 class_rev; + + unsigned int pci_mhz; + unsigned int f_low, f_high; + int adjust; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xFF; + + switch(dev->device) { + case PCI_DEVICE_ID_TTI_HPT366: + if (class_rev < 6) + return -ENODEV; + break; + case PCI_DEVICE_ID_TTI_HPT372: + /* 372N if rev >= 1*/ + if (class_rev == 0) + return -ENODEV; + break; + case PCI_DEVICE_ID_TTI_HPT302: + if (class_rev < 2) + return -ENODEV; + break; + case PCI_DEVICE_ID_TTI_HPT372N: + break; + default: + printk(KERN_ERR "pata_hpt3x2n: PCI table is bogus please report (%d).\n", dev->device); + return -ENODEV; + } + + /* Ok so this is a chip we support */ + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); + pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); + pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + + pci_read_config_byte(dev, 0x5A, &irqmask); + irqmask &= ~0x10; + pci_write_config_byte(dev, 0x5a, irqmask); + + /* Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or + 50 for UDMA100. Right now we always use 66 */ + + pci_mhz = hpt3x2n_pci_clock(dev); + + f_low = (pci_mhz * 48) / 66; /* PCI Mhz for 66Mhz DPLL */ + f_high = f_low + 2; /* Tolerance */ + + pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100); + /* PLL clock */ + pci_write_config_byte(dev, 0x5B, 0x21); + + /* Unlike the 37x we don't try jiggling the frequency */ + for(adjust = 0; adjust < 8; adjust++) { + if (hpt3xn_calibrate_dpll(dev)) + break; + pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); + } + if (adjust == 8) + printk(KERN_WARNING "hpt3xn: DPLL did not stabilize.\n"); + + /* Set our private data up. We only need a few flags so we use + it directly */ + port->private_data = NULL; + if (pci_mhz > 60) + port->private_data = (void *)PCI66; + + /* Now kick off ATA set up */ + port_info[0] = port_info[1] = port; + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id hpt3x2n[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT302), }, + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372N), }, + { 0, }, +}; + +static struct pci_driver hpt3x2n_pci_driver = { + .name = DRV_NAME, + .id_table = hpt3x2n, + .probe = hpt3x2n_init_one, + .remove = ata_pci_remove_one +}; + +static int __init hpt3x2n_init(void) +{ + return pci_register_driver(&hpt3x2n_pci_driver); +} + + +static void __exit hpt3x2n_exit(void) +{ + pci_unregister_driver(&hpt3x2n_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT3x2n/30x"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt3x2n); +MODULE_VERSION(DRV_VERSION); + +module_init(hpt3x2n_init); +module_exit(hpt3x2n_exit); diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c new file mode 100644 index 0000000..1527701 --- /dev/null +++ b/drivers/ata/pata_hpt3x3.c @@ -0,0 +1,226 @@ +/* + * pata_hpt3x3 - HPT3x3 driver + * (c) Copyright 2005-2006 Red Hat + * + * Was pata_hpt34x but the naming was confusing as it supported the + * 343 and 363 so it has been renamed. + * + * Based on: + * linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002 + * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> + * + * May be copied or modified under the terms of the GNU General Public + * License + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_hpt3x3" +#define DRV_VERSION "0.4.1" + +static int hpt3x3_probe_init(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * hpt3x3_probe_reset - reset the hpt3x3 bus + * @ap: ATA port to reset + * + * Perform the housekeeping when doing an ATA bus reeset. We just + * need to force the cable type. + */ + +static void hpt3x3_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, hpt3x3_probe_init, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * hpt3x3_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. This is fairly simple on the HPT3x3 as + * all we have to do is clear the MWDMA and UDMA bits then load the + * mode number. + */ + +static void hpt3x3_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 r1, r2; + int dn = 2 * ap->port_no + adev->devno; + + pci_read_config_dword(pdev, 0x44, &r1); + pci_read_config_dword(pdev, 0x48, &r2); + /* Load the PIO timing number */ + r1 &= ~(7 << (3 * dn)); + r1 |= (adev->pio_mode - XFER_PIO_0) << (3 * dn); + r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */ + + pci_write_config_dword(pdev, 0x44, r1); + pci_write_config_dword(pdev, 0x48, r2); +} + +/** + * hpt3x3_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * Set up the channel for MWDMA or UDMA modes. Much the same as with + * PIO, load the mode number and then set MWDMA or UDMA flag. + */ + +static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 r1, r2; + int dn = 2 * ap->port_no + adev->devno; + int mode_num = adev->dma_mode & 0x0F; + + pci_read_config_dword(pdev, 0x44, &r1); + pci_read_config_dword(pdev, 0x48, &r2); + /* Load the timing number */ + r1 &= ~(7 << (3 * dn)); + r1 |= (mode_num << (3 * dn)); + r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */ + + if (adev->dma_mode >= XFER_UDMA_0) + r2 |= 0x01 << dn; /* Ultra mode */ + else + r2 |= 0x10 << dn; /* MWDMA */ + + pci_write_config_dword(pdev, 0x44, r1); + pci_write_config_dword(pdev, 0x48, r2); +} + +static struct scsi_host_template hpt3x3_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations hpt3x3_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = hpt3x3_set_piomode, + .set_dmamode = hpt3x3_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = hpt3x3_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * hpt3x3_init_one - Initialise an HPT343/363 + * @dev: PCI device + * @id: Entry in match table + * + * Perform basic initialisation. The chip has a quirk that it won't + * function unless it is at XX00. The old ATA driver touched this up + * but we leave it for pci quirks to do properly. + */ + +static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &hpt3x3_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, + .port_ops = &hpt3x3_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + u16 cmd; + + /* Initialize the board */ + pci_write_config_word(dev, 0x80, 0x00); + /* Check if it is a 343 or a 363. 363 has COMMAND_MEMORY set */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if (cmd & PCI_COMMAND_MEMORY) + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0); + else + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); + + /* Now kick off ATA set up */ + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id hpt3x3[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT343), }, + { 0, }, +}; + +static struct pci_driver hpt3x3_pci_driver = { + .name = DRV_NAME, + .id_table = hpt3x3, + .probe = hpt3x3_init_one, + .remove = ata_pci_remove_one +}; + +static int __init hpt3x3_init(void) +{ + return pci_register_driver(&hpt3x3_pci_driver); +} + + +static void __exit hpt3x3_exit(void) +{ + pci_unregister_driver(&hpt3x3_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT343/363"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, hpt3x3); +MODULE_VERSION(DRV_VERSION); + +module_init(hpt3x3_init); +module_exit(hpt3x3_exit); diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c new file mode 100644 index 0000000..73948c8 --- /dev/null +++ b/drivers/ata/pata_isapnp.c @@ -0,0 +1,156 @@ + +/* + * pata-isapnp.c - ISA PnP PATA controller driver. + * Copyright 2005/2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * + * Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/isapnp.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/ata.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_isapnp" +#define DRV_VERSION "0.1.5" + +static struct scsi_host_template isapnp_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations isapnp_port_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * isapnp_init_one - attach an isapnp interface + * @idev: PnP device + * @dev_id: matching detect line + * + * Register an ISA bus IDE interface. Such interfaces are PIO 0 and + * non shared IRQ. + */ + +static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev_id) +{ + struct ata_probe_ent ae; + + if (pnp_port_valid(idev, 0) == 0) + return -ENODEV; + + /* FIXME: Should selected polled PIO here not fail */ + if (pnp_irq_valid(idev, 0) == 0) + return -ENODEV; + + memset(&ae, 0, sizeof(struct ata_probe_ent)); + INIT_LIST_HEAD(&ae.node); + ae.dev = &idev->dev; + ae.port_ops = &isapnp_port_ops; + ae.sht = &isapnp_sht; + ae.n_ports = 1; + ae.pio_mask = 1; /* ISA so PIO 0 cycles */ + ae.irq = pnp_irq(idev, 0); + ae.irq_flags = 0; + ae.port_flags = ATA_FLAG_SLAVE_POSS; + ae.port[0].cmd_addr = pnp_port_start(idev, 0); + + if (pnp_port_valid(idev, 1) == 0) { + ae.port[0].altstatus_addr = pnp_port_start(idev, 1); + ae.port[0].ctl_addr = pnp_port_start(idev, 1); + ae.port_flags |= ATA_FLAG_SRST; + } + ata_std_ports(&ae.port[0]); + + if (ata_device_add(&ae) == 0) + return -ENODEV; + return 0; +} + +/** + * isapnp_remove_one - unplug an isapnp interface + * @idev: PnP device + * + * Remove a previously configured PnP ATA port. Called only on module + * unload events as the core does not currently deal with ISAPnP docking. + */ + +static void isapnp_remove_one(struct pnp_dev *idev) +{ + struct device *dev = &idev->dev; + struct ata_host *host = dev_get_drvdata(dev); + + ata_host_remove(host); + dev_set_drvdata(dev, NULL); +} + +static struct pnp_device_id isapnp_devices[] = { + /* Generic ESDI/IDE/ATA compatible hard disk controller */ + {.id = "PNP0600", .driver_data = 0}, + {.id = ""} +}; + +static struct pnp_driver isapnp_driver = { + .name = DRV_NAME, + .id_table = isapnp_devices, + .probe = isapnp_init_one, + .remove = isapnp_remove_one, +}; + +static int __init isapnp_init(void) +{ + return pnp_register_driver(&isapnp_driver); +} + +static void __exit isapnp_exit(void) +{ + pnp_unregister_driver(&isapnp_driver); +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ISA PnP ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(isapnp_init); +module_exit(isapnp_exit); diff --git a/drivers/ata/pata_it8172.c b/drivers/ata/pata_it8172.c new file mode 100644 index 0000000..53d35bb --- /dev/null +++ b/drivers/ata/pata_it8172.c @@ -0,0 +1,288 @@ +/* + * pata_it8172.c - IT8172 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * Based heavily on + * + * BRIEF MODULE DESCRIPTION + * IT8172 IDE controller support + * + * Copyright 2000 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * stevel@mvista.com or source@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO + * Check for errata + * See if we really need to force native mode + * PIO timings (also lacking in original) + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_it8172" +#define DRV_VERSION "0.3.1" + +static int it8172_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits it8172_enable_bits[] = { + { 0x00, 0, 0x00, 0x00 }, + { 0x40, 1, 0x00, 0x01 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (ap->port_no && !pci_test_config_bits(pdev, &it8172_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static void it8172_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, it8172_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * it8172_set_pio_timing - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called by both the pio and dma setup functions to set the controller + * timings for PIO transfers. We must load both the mode number and + * timing values into the controller. + */ + +static void it8172_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 reg40; + + pci_read_config_word(pdev, 0x40, ®40); + + /* + * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44 + * are being left at the default values of 8 PCI clocks (242 nsec + * for a 33 MHz clock). These can be safely shortened at higher + * PIO modes. The DIOR/DIOW pulse width and recovery times only + * apply to PIO modes, not to the DMA modes. + */ + + /* + * Enable port 0x44. The IT8172G spec is confused; it calls + * this register the "Slave IDE Timing Register", but in fact, + * it controls timing for both master and slave drives. + */ + + reg40 |= 0x4000; + if (adev->devno) { + reg40 &= 0xC006; + if (pio > 1) + /* Enable prefetch and IORDY sample-point */ + reg40 |= 0x0060; + } else { + reg40 &= 0xC060; + if (pio > 1) + /* Enable prefetch and IORDY sample-point */ + reg40 |= 0x0006; + } + /* Write back the enables */ + pci_write_config_word(pdev, 0x40, reg40); +} + +/** + * it8172_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. We use a shared helper for this + * as the DMA setup must also adjust the PIO timing information. + */ + +static void it8172_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + it8172_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * it8172_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. We must tune an appropriate PIO + * mode to match. + */ + +static void it8172_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = (2 * ap->port_no) + adev->devno; + u8 reg48, reg4a; + int pio; + + static const int pio_map[] = { 1, 3, 4}; + /* + * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec + * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA + * transfers on some drives, even though both numbers meet the minimum + * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively. + * So the faster times are just commented out here. The good news is + * that the slower cycle time has very little affect on transfer + * performance. + */ + + pci_read_config_byte(pdev, 0x48, ®48); + pci_read_config_byte(pdev, 0x4A, ®4a); + + reg4a &= ~(3 << (4 * dn)); + + if (adev->dma_mode >= XFER_UDMA_0) { + reg48 |= 1 << dn; +#ifdef UDMA_TIMING_SET + reg4a |= ((adev->dma_mode - XFER_UDMA_0) << (4 * dn)); +#endif + pio = 4; + } else { + pio = pio_map[adev->dma_mode - XFER_MW_DMA_0]; + reg48 &= ~ (1 << dn); + } + pci_write_config_byte(pdev, 0x48, reg48); + pci_write_config_byte(pdev, 0x4A, reg4a); + it8172_set_pio_timing(ap, adev, pio); + +} + +static struct scsi_host_template it8172_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations it8172_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = it8172_set_piomode, + .set_dmamode = it8172_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = it8172_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &it8172_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x06, /* No MWDMA0 support */ + .udma_mask = 0x7, + .port_ops = &it8172_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if ((!(PCI_FUNC(dev->devfn) & 1) || + (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)))) + return -ENODEV; /* IT8172 is more than an IDE controller */ + + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id it8172[] = { + { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G), }, + { 0, }, +}; + +static struct pci_driver it8172_pci_driver = { + .name = DRV_NAME, + .id_table = it8172, + .probe = it8172_init_one, + .remove = ata_pci_remove_one +}; + +static int __init it8172_init(void) +{ + return pci_register_driver(&it8172_pci_driver); +} + + +static void __exit it8172_exit(void) +{ + pci_unregister_driver(&it8172_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ITE IT8172"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, it8172); +MODULE_VERSION(DRV_VERSION); + +module_init(it8172_init); +module_exit(it8172_exit); diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c new file mode 100644 index 0000000..af39097 --- /dev/null +++ b/drivers/ata/pata_it821x.c @@ -0,0 +1,847 @@ +/* + * ata-it821x.c - IT821x PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * based upon + * + * it821x.c + * + * linux/drivers/ide/pci/it821x.c Version 0.09 December 2004 + * + * Copyright (C) 2004 Red Hat <alan@redhat.com> + * + * May be copied or modified under the terms of the GNU General Public License + * Based in part on the ITE vendor provided SCSI driver. + * + * Documentation available from + * http://www.ite.com.tw/pc/IT8212F_V04.pdf + * Some other documents are NDA. + * + * The ITE8212 isn't exactly a standard IDE controller. It has two + * modes. In pass through mode then it is an IDE controller. In its smart + * mode its actually quite a capable hardware raid controller disguised + * as an IDE controller. Smart mode only understands DMA read/write and + * identify, none of the fancier commands apply. The IT8211 is identical + * in other respects but lacks the raid mode. + * + * Errata: + * o Rev 0x10 also requires master/slave hold the same DMA timings and + * cannot do ATAPI MWDMA. + * o The identify data for raid volumes lacks CHS info (technically ok) + * but also fails to set the LBA28 and other bits. We fix these in + * the IDE probe quirk code. + * o If you write LBA48 sized I/O's (ie > 256 sector) in smart mode + * raid then the controller firmware dies + * o Smart mode without RAID doesn't clear all the necessary identify + * bits to reduce the command set to the one used + * + * This has a few impacts on the driver + * - In pass through mode we do all the work you would expect + * - In smart mode the clocking set up is done by the controller generally + * but we must watch the other limits and filter. + * - There are a few extra vendor commands that actually talk to the + * controller but only work PIO with no IRQ. + * + * Vendor areas of the identify block in smart mode are used for the + * timing and policy set up. Each HDD in raid mode also has a serial + * block on the disk. The hardware extra commands are get/set chip status, + * rebuild, get rebuild status. + * + * In Linux the driver supports pass through mode as if the device was + * just another IDE controller. If the smart mode is running then + * volumes are managed by the controller firmware and each IDE "disk" + * is a raid volume. Even more cute - the controller can do automated + * hotplug and rebuild. + * + * The pass through controller itself is a little demented. It has a + * flaw that it has a single set of PIO/MWDMA timings per channel so + * non UDMA devices restrict each others performance. It also has a + * single clock source per channel so mixed UDMA100/133 performance + * isn't perfect and we have to pick a clock. Thankfully none of this + * matters in smart mode. ATAPI DMA is not currently supported. + * + * It seems the smart mode is a win for RAID1/RAID10 but otherwise not. + * + * TODO + * - ATAPI and other speed filtering + * - Command filter in smart mode + * - RAID configuration ioctls + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + + +#define DRV_NAME "pata_it821x" +#define DRV_VERSION "0.3.2" + +struct it821x_dev +{ + unsigned int smart:1, /* Are we in smart raid mode */ + timing10:1; /* Rev 0x10 */ + u8 clock_mode; /* 0, ATA_50 or ATA_66 */ + u8 want[2][2]; /* Mode/Pri log for master slave */ + /* We need these for switching the clock when DMA goes on/off + The high byte is the 66Mhz timing */ + u16 pio[2]; /* Cached PIO values */ + u16 mwdma[2]; /* Cached MWDMA values */ + u16 udma[2]; /* Cached UDMA values (per drive) */ + u16 last_device; /* Master or slave loaded ? */ +}; + +#define ATA_66 0 +#define ATA_50 1 +#define ATA_ANY 2 + +#define UDMA_OFF 0 +#define MWDMA_OFF 0 + +/* + * We allow users to force the card into non raid mode without + * flashing the alternative BIOS. This is also neccessary right now + * for embedded platforms that cannot run a PC BIOS but are using this + * device. + */ + +static int it8212_noraid; + +/** + * it821x_pre_reset - probe + * @ap: ATA port + * + * Set the cable type + */ + +static int it821x_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * it821x_error_handler - probe/reset + * @ap: ATA port + * + * Set the cable type and trigger a probe + */ + +static void it821x_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, it821x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * it821x_program - program the PIO/MWDMA registers + * @ap: ATA port + * @adev: Device to program + * @timing: Timing value (66Mhz in top 8bits, 50 in the low 8) + * + * Program the PIO/MWDMA timing for this channel according to the + * current clock. These share the same register so are managed by + * the DMA start/stop sequence as with the old driver. + */ + +static void it821x_program(struct ata_port *ap, struct ata_device *adev, u16 timing) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev = ap->private_data; + int channel = ap->port_no; + u8 conf; + + /* Program PIO/MWDMA timing bits */ + if (itdev->clock_mode == ATA_66) + conf = timing >> 8; + else + conf = timing & 0xFF; + pci_write_config_byte(pdev, 0x54 + 4 * channel, conf); +} + + +/** + * it821x_program_udma - program the UDMA registers + * @ap: ATA port + * @adev: ATA device to update + * @timing: Timing bits. Top 8 are for 66Mhz bottom for 50Mhz + * + * Program the UDMA timing for this drive according to the + * current clock. Handles the dual clocks and also knows about + * the errata on the 0x10 revision. The UDMA errata is partly handled + * here and partly in start_dma. + */ + +static void it821x_program_udma(struct ata_port *ap, struct ata_device *adev, u16 timing) +{ + struct it821x_dev *itdev = ap->private_data; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int channel = ap->port_no; + int unit = adev->devno; + u8 conf; + + /* Program UDMA timing bits */ + if (itdev->clock_mode == ATA_66) + conf = timing >> 8; + else + conf = timing & 0xFF; + if (itdev->timing10 == 0) + pci_write_config_byte(pdev, 0x56 + 4 * channel + unit, conf); + else { + /* Early revision must be programmed for both together */ + pci_write_config_byte(pdev, 0x56 + 4 * channel, conf); + pci_write_config_byte(pdev, 0x56 + 4 * channel + 1, conf); + } +} + +/** + * it821x_clock_strategy + * @ap: ATA interface + * @adev: ATA device being updated + * + * Select between the 50 and 66Mhz base clocks to get the best + * results for this interface. + */ + +static void it821x_clock_strategy(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev = ap->private_data; + u8 unit = adev->devno; + struct ata_device *pair = ata_dev_pair(adev); + + int clock, altclock; + u8 v; + int sel = 0; + + /* Look for the most wanted clocking */ + if (itdev->want[0][0] > itdev->want[1][0]) { + clock = itdev->want[0][1]; + altclock = itdev->want[1][1]; + } else { + clock = itdev->want[1][1]; + altclock = itdev->want[0][1]; + } + + /* Master doesn't care does the slave ? */ + if (clock == ATA_ANY) + clock = altclock; + + /* Nobody cares - keep the same clock */ + if (clock == ATA_ANY) + return; + /* No change */ + if (clock == itdev->clock_mode) + return; + + /* Load this into the controller */ + if (clock == ATA_66) + itdev->clock_mode = ATA_66; + else { + itdev->clock_mode = ATA_50; + sel = 1; + } + pci_read_config_byte(pdev, 0x50, &v); + v &= ~(1 << (1 + ap->port_no)); + v |= sel << (1 + ap->port_no); + pci_write_config_byte(pdev, 0x50, v); + + /* + * Reprogram the UDMA/PIO of the pair drive for the switch + * MWDMA will be dealt with by the dma switcher + */ + if (pair && itdev->udma[1-unit] != UDMA_OFF) { + it821x_program_udma(ap, pair, itdev->udma[1-unit]); + it821x_program(ap, pair, itdev->pio[1-unit]); + } + /* + * Reprogram the UDMA/PIO of our drive for the switch. + * MWDMA will be dealt with by the dma switcher + */ + if (itdev->udma[unit] != UDMA_OFF) { + it821x_program_udma(ap, adev, itdev->udma[unit]); + it821x_program(ap, adev, itdev->pio[unit]); + } +} + +/** + * it821x_passthru_set_piomode - set PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Configure for PIO mode. This is complicated as the register is + * shared by PIO and MWDMA and for both channels. + */ + +static void it821x_passthru_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + /* Spec says 89 ref driver uses 88 */ + static const u16 pio[] = { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 }; + static const u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY }; + + struct it821x_dev *itdev = ap->private_data; + int unit = adev->devno; + int mode_wanted = adev->pio_mode - XFER_PIO_0; + + /* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */ + itdev->want[unit][1] = pio_want[mode_wanted]; + itdev->want[unit][0] = 1; /* PIO is lowest priority */ + itdev->pio[unit] = pio[mode_wanted]; + it821x_clock_strategy(ap, adev); + it821x_program(ap, adev, itdev->pio[unit]); +} + +/** + * it821x_passthru_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Set up the DMA modes. The actions taken depend heavily on the mode + * to use. If UDMA is used as is hopefully the usual case then the + * timing register is private and we need only consider the clock. If + * we are using MWDMA then we have to manage the setting ourself as + * we switch devices and mode. + */ + +static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u16 dma[] = { 0x8866, 0x3222, 0x3121 }; + static const u8 mwdma_want[] = { ATA_ANY, ATA_66, ATA_ANY }; + static const u16 udma[] = { 0x4433, 0x4231, 0x3121, 0x2121, 0x1111, 0x2211, 0x1111 }; + static const u8 udma_want[] = { ATA_ANY, ATA_50, ATA_ANY, ATA_66, ATA_66, ATA_50, ATA_66 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev = ap->private_data; + int channel = ap->port_no; + int unit = adev->devno; + u8 conf; + + if (adev->dma_mode >= XFER_UDMA_0) { + int mode_wanted = adev->dma_mode - XFER_UDMA_0; + + itdev->want[unit][1] = udma_want[mode_wanted]; + itdev->want[unit][0] = 3; /* UDMA is high priority */ + itdev->mwdma[unit] = MWDMA_OFF; + itdev->udma[unit] = udma[mode_wanted]; + if (mode_wanted >= 5) + itdev->udma[unit] |= 0x8080; /* UDMA 5/6 select on */ + + /* UDMA on. Again revision 0x10 must do the pair */ + pci_read_config_byte(pdev, 0x50, &conf); + if (itdev->timing10) + conf &= channel ? 0x9F: 0xE7; + else + conf &= ~ (1 << (3 + 2 * channel + unit)); + pci_write_config_byte(pdev, 0x50, conf); + it821x_clock_strategy(ap, adev); + it821x_program_udma(ap, adev, itdev->udma[unit]); + } else { + int mode_wanted = adev->dma_mode - XFER_MW_DMA_0; + + itdev->want[unit][1] = mwdma_want[mode_wanted]; + itdev->want[unit][0] = 2; /* MWDMA is low priority */ + itdev->mwdma[unit] = dma[mode_wanted]; + itdev->udma[unit] = UDMA_OFF; + + /* UDMA bits off - Revision 0x10 do them in pairs */ + pci_read_config_byte(pdev, 0x50, &conf); + if (itdev->timing10) + conf |= channel ? 0x60: 0x18; + else + conf |= 1 << (3 + 2 * channel + unit); + pci_write_config_byte(pdev, 0x50, conf); + it821x_clock_strategy(ap, adev); + } +} + +/** + * it821x_passthru_dma_start - DMA start callback + * @qc: Command in progress + * + * Usually drivers set the DMA timing at the point the set_dmamode call + * is made. IT821x however requires we load new timings on the + * transitions in some cases. + */ + +static void it821x_passthru_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct it821x_dev *itdev = ap->private_data; + int unit = adev->devno; + + if (itdev->mwdma[unit] != MWDMA_OFF) + it821x_program(ap, adev, itdev->mwdma[unit]); + else if (itdev->udma[unit] != UDMA_OFF && itdev->timing10) + it821x_program_udma(ap, adev, itdev->udma[unit]); + ata_bmdma_start(qc); +} + +/** + * it821x_passthru_dma_stop - DMA stop callback + * @qc: ATA command + * + * We loaded new timings in dma_start, as a result we need to restore + * the PIO timings in dma_stop so that the next command issue gets the + * right clock values. + */ + +static void it821x_passthru_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct it821x_dev *itdev = ap->private_data; + int unit = adev->devno; + + ata_bmdma_stop(qc); + if (itdev->mwdma[unit] != MWDMA_OFF) + it821x_program(ap, adev, itdev->pio[unit]); +} + + +/** + * it821x_passthru_dev_select - Select master/slave + * @ap: ATA port + * @device: Device number (not pointer) + * + * Device selection hook. If neccessary perform clock switching + */ + +static void it821x_passthru_dev_select(struct ata_port *ap, + unsigned int device) +{ + struct it821x_dev *itdev = ap->private_data; + if (itdev && device != itdev->last_device) { + struct ata_device *adev = &ap->device[device]; + it821x_program(ap, adev, itdev->pio[adev->devno]); + itdev->last_device = device; + } + ata_std_dev_select(ap, device); +} + +/** + * it821x_smart_qc_issue_prot - wrap qc issue prot + * @qc: command + * + * Wrap the command issue sequence for the IT821x. We need to + * perform out own device selection timing loads before the + * usual happenings kick off + */ + +static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc) +{ + switch(qc->tf.command) + { + /* Commands the firmware supports */ + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + case ATA_CMD_PIO_READ: + case ATA_CMD_PIO_READ_EXT: + case ATA_CMD_PIO_WRITE: + case ATA_CMD_PIO_WRITE_EXT: + case ATA_CMD_READ_MULTI: + case ATA_CMD_READ_MULTI_EXT: + case ATA_CMD_WRITE_MULTI: + case ATA_CMD_WRITE_MULTI_EXT: + case ATA_CMD_ID_ATA: + /* Arguably should just no-op this one */ + case ATA_CMD_SET_FEATURES: + return ata_qc_issue_prot(qc); + } + printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command); + return AC_ERR_INVALID; +} + +/** + * it821x_passthru_qc_issue_prot - wrap qc issue prot + * @qc: command + * + * Wrap the command issue sequence for the IT821x. We need to + * perform out own device selection timing loads before the + * usual happenings kick off + */ + +static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc) +{ + it821x_passthru_dev_select(qc->ap, qc->dev->devno); + return ata_qc_issue_prot(qc); +} + +/** + * it821x_smart_set_mode - mode setting + * @ap: interface to set up + * + * Use a non standard set_mode function. We don't want to be tuned. + * The BIOS configured everything. Our job is not to fiddle. We + * read the dma enabled bits from the PCI configuration of the device + * and respect them. + */ + +static void it821x_smart_set_mode(struct ata_port *ap) +{ + int dma_enabled = 0; + int i; + + /* Bits 5 and 6 indicate if DMA is active on master/slave */ + /* It is possible that BMDMA isn't allocated */ + if (ap->ioaddr.bmdma_addr) + dma_enabled = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev)) { + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = XFER_MW_DMA_0; + /* We do need the right mode information for DMA or PIO + and this comes from the current configuration flags */ + if (dma_enabled & (1 << (5 + i))) { + dev->xfer_mode = XFER_MW_DMA_0; + dev->xfer_shift = ATA_SHIFT_MWDMA; + dev->flags &= ~ATA_DFLAG_PIO; + } else { + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } + } +} + +/** + * it821x_dev_config - Called each device identify + * @ap: ATA port + * @adev: Device that has just been identified + * + * Perform the initial setup needed for each device that is chip + * special. In our case we need to lock the sector count to avoid + * blowing the brains out of the firmware with large LBA48 requests + * + * FIXME: When FUA appears we need to block FUA too. And SMART and + * basically we need to filter commands for this chip. + */ + +static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev) +{ + unsigned char model_num[40]; + char *s; + unsigned int len; + + /* This block ought to be a library routine as it is in several + drivers now */ + + ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS, + sizeof(model_num)); + s = &model_num[0]; + len = strnlen(s, sizeof(model_num)); + + /* ATAPI specifies that empty space is blank-filled; remove blanks */ + while ((len > 0) && (s[len - 1] == ' ')) { + len--; + s[len] = 0; + } + + if (adev->max_sectors > 255) + adev->max_sectors = 255; + + if (strstr(model_num, "Integrated Technology Express")) { + /* RAID mode */ + printk(KERN_INFO "IT821x %sRAID%d volume", + adev->id[147]?"Bootable ":"", + adev->id[129]); + if (adev->id[129] != 1) + printk("(%dK stripe)", adev->id[146]); + printk(".\n"); + } +} + + +/** + * it821x_check_atapi_dma - ATAPI DMA handler + * @qc: Command we are about to issue + * + * Decide if this ATAPI command can be issued by DMA on this + * controller. Return 0 if it can be. + */ + +static int it821x_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct it821x_dev *itdev = ap->private_data; + + /* No ATAPI DMA in smart mode */ + if (itdev->smart) + return -EOPNOTSUPP; + /* No ATAPI DMA on rev 10 */ + if (itdev->timing10) + return -EOPNOTSUPP; + /* Cool */ + return 0; +} + + +/** + * it821x_port_start - port setup + * @ap: ATA port being set up + * + * The it821x needs to maintain private data structures and also to + * use the standard PCI interface which lacks support for this + * functionality. We instead set up the private data on the port + * start hook, and tear it down on port stop + */ + +static int it821x_port_start(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct it821x_dev *itdev; + u8 conf; + + int ret = ata_port_start(ap); + if (ret < 0) + return ret; + + ap->private_data = kmalloc(sizeof(struct it821x_dev), GFP_KERNEL); + if (ap->private_data == NULL) { + ata_port_stop(ap); + return -ENOMEM; + } + + itdev = ap->private_data; + memset(itdev, 0, sizeof(struct it821x_dev)); + + pci_read_config_byte(pdev, 0x50, &conf); + + if (conf & 1) { + itdev->smart = 1; + /* Long I/O's although allowed in LBA48 space cause the + onboard firmware to enter the twighlight zone */ + /* No ATAPI DMA in this mode either */ + } + /* Pull the current clocks from 0x50 */ + if (conf & (1 << (1 + ap->port_no))) + itdev->clock_mode = ATA_50; + else + itdev->clock_mode = ATA_66; + + itdev->want[0][1] = ATA_ANY; + itdev->want[1][1] = ATA_ANY; + itdev->last_device = -1; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &conf); + if (conf == 0x10) { + itdev->timing10 = 1; + /* Need to disable ATAPI DMA for this case */ + if (!itdev->smart) + printk(KERN_WARNING DRV_NAME": Revision 0x10, workarounds activated.\n"); + } + + return 0; +} + +/** + * it821x_port_stop - port shutdown + * @ap: ATA port being removed + * + * Release the private objects we added in it821x_port_start + */ + +static void it821x_port_stop(struct ata_port *ap) { + kfree(ap->private_data); + ap->private_data = NULL; /* We want an OOPS if we reuse this + too late! */ + ata_port_stop(ap); +} + +static struct scsi_host_template it821x_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + /* 255 sectors to begin with. This is locked in smart mode but not + in pass through */ + .max_sectors = 255, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations it821x_smart_port_ops = { + .set_mode = it821x_smart_set_mode, + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .mode_filter = ata_pci_default_filter, + + .check_status = ata_check_status, + .check_atapi_dma= it821x_check_atapi_dma, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .dev_config = it821x_dev_config, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = it821x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = it821x_smart_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = it821x_port_start, + .port_stop = it821x_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations it821x_passthru_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = it821x_passthru_set_piomode, + .set_dmamode = it821x_passthru_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .check_atapi_dma= it821x_check_atapi_dma, + .dev_select = it821x_passthru_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = it821x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = it821x_passthru_bmdma_start, + .bmdma_stop = it821x_passthru_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = it821x_passthru_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_clear = ata_bmdma_irq_clear, + .irq_handler = ata_interrupt, + + .port_start = it821x_port_start, + .port_stop = it821x_port_stop, + .host_stop = ata_host_stop +}; + +static void __devinit it821x_disable_raid(struct pci_dev *pdev) +{ + /* Reset local CPU, and set BIOS not ready */ + pci_write_config_byte(pdev, 0x5E, 0x01); + + /* Set to bypass mode, and reset PCI bus */ + pci_write_config_byte(pdev, 0x50, 0x00); + pci_write_config_word(pdev, PCI_COMMAND, + PCI_COMMAND_PARITY | PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + pci_write_config_word(pdev, 0x40, 0xA0F3); + + pci_write_config_dword(pdev,0x4C, 0x02040204); + pci_write_config_byte(pdev, 0x42, 0x36); + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x20); +} + + +static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + u8 conf; + + static struct ata_port_info info_smart = { + .sht = &it821x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &it821x_smart_port_ops + }; + static struct ata_port_info info_passthru = { + .sht = &it821x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &it821x_passthru_port_ops + }; + static struct ata_port_info *port_info[2]; + + static char *mode[2] = { "pass through", "smart" }; + + /* Force the card into bypass mode if so requested */ + if (it8212_noraid) { + printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n"); + it821x_disable_raid(pdev); + } + pci_read_config_byte(pdev, 0x50, &conf); + conf &= 1; + + printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]); + if (conf == 0) + port_info[0] = port_info[1] = &info_passthru; + else + port_info[0] = port_info[1] = &info_smart; + + return ata_pci_init_one(pdev, port_info, 2); +} + +static struct pci_device_id it821x[] = { + { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8211), }, + { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8212), }, + { 0, }, +}; + +static struct pci_driver it821x_pci_driver = { + .name = DRV_NAME, + .id_table = it821x, + .probe = it821x_init_one, + .remove = ata_pci_remove_one +}; + +static int __init it821x_init(void) +{ + return pci_register_driver(&it821x_pci_driver); +} + + +static void __exit it821x_exit(void) +{ + pci_unregister_driver(&it821x_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the IT8211/IT8212 IDE RAID controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, it821x); +MODULE_VERSION(DRV_VERSION); + + +module_param_named(noraid, it8212_noraid, int, S_IRUGO); +MODULE_PARM_DESC(it8212_noraid, "Force card into bypass mode"); + +module_init(it821x_init); +module_exit(it821x_exit); diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c new file mode 100644 index 0000000..6832a64 --- /dev/null +++ b/drivers/ata/pata_jmicron.c @@ -0,0 +1,266 @@ +/* + * pata_jmicron.c - JMicron ATA driver for non AHCI mode. This drives the + * PATA port of the controller. The SATA ports are + * driven by AHCI in the usual configuration although + * this driver can handle other setups if we need it. + * + * (c) 2006 Red Hat <alan@redhat.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/ata.h> + +#define DRV_NAME "pata_jmicron" +#define DRV_VERSION "0.1.2" + +typedef enum { + PORT_PATA0 = 0, + PORT_PATA1 = 1, + PORT_SATA = 2, +} port_type; + +/** + * jmicron_pre_reset - check for 40/80 pin + * @ap: Port + * + * Perform the PATA port setup we need. + + * On the Jmicron 361/363 there is a single PATA port that can be mapped + * either as primary or secondary (or neither). We don't do any policy + * and setup here. We assume that has been done by init_one and the + * BIOS. + */ + +static int jmicron_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 control; + u32 control5; + int port_mask = 1<< (4 * ap->port_no); + int port = ap->port_no; + port_type port_map[2]; + + /* Check if our port is enabled */ + pci_read_config_dword(pdev, 0x40, &control); + if ((control & port_mask) == 0) + return 0; + + /* There are two basic mappings. One has the two SATA ports merged + as master/slave and the secondary as PATA, the other has only the + SATA port mapped */ + if (control & (1 << 23)) { + port_map[0] = PORT_SATA; + port_map[1] = PORT_PATA0; + } else { + port_map[0] = PORT_SATA; + port_map[1] = PORT_SATA; + } + + /* The 365/366 may have this bit set to map the second PATA port + as the internal primary channel */ + pci_read_config_dword(pdev, 0x80, &control5); + if (control5 & (1<<24)) + port_map[0] = PORT_PATA1; + + /* The two ports may then be logically swapped by the firmware */ + if (control & (1 << 22)) + port = port ^ 1; + + /* + * Now we know which physical port we are talking about we can + * actually do our cable checking etc. Thankfully we don't need + * to do the plumbing for other cases. + */ + switch (port_map[port]) + { + case PORT_PATA0: + if (control & (1 << 5)) + return 0; + if (control & (1 << 3)) /* 40/80 pin primary */ + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + break; + case PORT_PATA1: + /* Bit 21 is set if the port is enabled */ + if ((control5 & (1 << 21)) == 0) + return 0; + if (control5 & (1 << 19)) /* 40/80 pin secondary */ + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + break; + case PORT_SATA: + ap->cbl = ATA_CBL_SATA; + break; + } + return ata_std_prereset(ap); +} + +/** + * jmicron_error_handler - Setup and error handler + * @ap: Port to handle + * + * LOCKING: + * None (inherited from caller). + */ + +static void jmicron_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, jmicron_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/* No PIO or DMA methods needed for this device */ + +static struct scsi_host_template jmicron_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + /* Special handling needed if you have sector or LBA48 limits */ + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + /* Use standard CHS mapping rules */ + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations jmicron_ops = { + .port_disable = ata_port_disable, + + /* Task file is PCI ATA format, use helpers */ + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = jmicron_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + /* BMDMA handling is PCI ATA format, use helpers */ + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + /* Timeout handling. Special recovery hooks here */ + .eng_timeout = ata_eng_timeout, + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + /* Generic PATA PCI ATA helpers */ + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * jmicron_init_one - Register Jmicron ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in jmicron_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &jmicron_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + + .port_ops = &jmicron_ops, + }; + struct ata_port_info *port_info[2] = { &info, &info }; + + u32 reg; + + if (id->driver_data != 368) { + /* Put the controller into AHCI mode in case the AHCI driver + has not yet been loaded. This can be done with either + function present */ + + /* FIXME: We may want a way to override this in future */ + pci_write_config_byte(pdev, 0x41, 0xa1); + } + + /* PATA controller is fn 1, AHCI is fn 0 */ + if (PCI_FUNC(pdev->devfn) != 1) + return -ENODEV; + + if ( id->driver_data == 365 || id->driver_data == 366) { + /* The 365/66 have two PATA channels, redirect the second */ + pci_read_config_dword(pdev, 0x80, ®); + reg |= (1 << 24); /* IDE1 to PATA IDE secondary */ + pci_write_config_dword(pdev, 0x80, reg); + } + + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id jmicron_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361), 361}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363), 363}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365), 365}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366), 366}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368), 368}, + { } /* terminate list */ +}; + +static struct pci_driver jmicron_pci_driver = { + .name = DRV_NAME, + .id_table = jmicron_pci_tbl, + .probe = jmicron_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init jmicron_init(void) +{ + return pci_register_driver(&jmicron_pci_driver); +} + +static void __exit jmicron_exit(void) +{ + pci_unregister_driver(&jmicron_pci_driver); +} + +module_init(jmicron_init); +module_exit(jmicron_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Jmicron PATA ports"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c new file mode 100644 index 0000000..ad37c22 --- /dev/null +++ b/drivers/ata/pata_legacy.c @@ -0,0 +1,949 @@ +/* + * pata-legacy.c - Legacy port PATA/SATA controller driver. + * Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * An ATA driver for the legacy ATA ports. + * + * Data Sources: + * Opti 82C465/82C611 support: Data sheets at opti-inc.com + * HT6560 series: + * Promise 20230/20620: + * http://www.ryston.cz/petr/vlb/pdc20230b.html + * http://www.ryston.cz/petr/vlb/pdc20230c.html + * http://www.ryston.cz/petr/vlb/pdc20630.html + * + * Unsupported but docs exist: + * Appian/Adaptec AIC25VL01/Cirrus Logic PD7220 + * Winbond W83759A + * + * This driver handles legacy (that is "ISA/VLB side") IDE ports found + * on PC class systems. There are three hybrid devices that are exceptions + * The Cyrix 5510/5520 where a pre SFF ATA device is on the bridge and + * the MPIIX where the tuning is PCI side but the IDE is "ISA side". + * + * Specific support is included for the ht6560a/ht6560b/opti82c611a/ + * opti82c465mv/promise 20230c/20630 + * + * Use the autospeed and pio_mask options with: + * Appian ADI/2 aka CLPD7220 or AIC25VL01. + * Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with + * Goldstar GM82C711, PIC-1288A-125, UMC 82C871F, Winbond W83759, + * Winbond W83759A, Promise PDC20230-B + * + * For now use autospeed and pio_mask as above with the W83759A. This may + * change. + * + * TODO + * Merge existing pata_qdi driver + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/ata.h> +#include <linux/libata.h> +#include <linux/platform_device.h> + +#define DRV_NAME "pata_legacy" +#define DRV_VERSION "0.5.3" + +#define NR_HOST 6 + +static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; +static int legacy_irq[NR_HOST] = { 15, 14, 11, 10, 8, 12 }; + +struct legacy_data { + unsigned long timing; + u8 clock[2]; + u8 last; + int fast; + struct platform_device *platform_dev; + +}; + +static struct legacy_data legacy_data[NR_HOST]; +static struct ata_host *legacy_host[NR_HOST]; +static int nr_legacy_host; + + +static int probe_all; /* Set to check all ISA port ranges */ +static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */ +static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */ +static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */ +static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */ +static int autospeed; /* Chip present which snoops speed changes */ +static int pio_mask = 0x1F; /* PIO range for autospeed devices */ + +/** + * legacy_set_mode - mode setting + * @ap: IDE interface + * + * Use a non standard set_mode function. We don't want to be tuned. + * + * The BIOS configured everything. Our job is not to fiddle. Just use + * whatever PIO the hardware is using and leave it at that. When we + * get some kind of nice user driven API for control then we can + * expand on this as per hdparm in the base kernel. + */ + +static void legacy_set_mode(struct ata_port *ap) +{ + int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev)) { + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } +} + +static struct scsi_host_template legacy_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +/* + * These ops are used if the user indicates the hardware + * snoops the commands to decide on the mode and handles the + * mode selection "magically" itself. Several legacy controllers + * do this. The mode range can be set if it is not 0x1F by setting + * pio_mask as well. + */ + +static struct ata_port_operations simple_port_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer_noirq, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations legacy_port_ops = { + .set_mode = legacy_set_mode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer_noirq, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Promise 20230C and 20620 support + * + * This controller supports PIO0 to PIO2. We set PIO timings conservatively to + * allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to + * controller and PIO'd to the host and not supported. + */ + +static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int tries = 5; + int pio = adev->pio_mode - XFER_PIO_0; + u8 rt; + unsigned long flags; + + /* Safe as UP only. Force I/Os to occur together */ + + local_irq_save(flags); + + /* Unlock the control interface */ + do + { + inb(0x1F5); + outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F2); + inb(0x3F6); + inb(0x3F6); + inb(0x1F2); + inb(0x1F2); + } + while((inb(0x1F2) & 0x80) && --tries); + + local_irq_restore(flags); + + outb(inb(0x1F4) & 0x07, 0x1F4); + + rt = inb(0x1F3); + rt &= 0x07 << (3 * adev->devno); + if (pio) + rt |= (1 + 3 * pio) << (3 * adev->devno); + + udelay(100); + outb(inb(0x1F2) | 0x01, 0x1F2); + udelay(100); + inb(0x1F5); + +} + +static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + int slop = buflen & 3; + unsigned long flags; + + if (ata_id_has_dword_io(adev->id)) { + local_irq_save(flags); + + /* Perform the 32bit I/O synchronization sequence */ + inb(ap->ioaddr.nsect_addr); + inb(ap->ioaddr.nsect_addr); + inb(ap->ioaddr.nsect_addr); + + /* Now the data */ + + if (write_data) + outsl(ap->ioaddr.data_addr, buf, buflen >> 2); + else + insl(ap->ioaddr.data_addr, buf, buflen >> 2); + + if (unlikely(slop)) { + u32 pad; + if (write_data) { + memcpy(&pad, buf + buflen - slop, slop); + outl(le32_to_cpu(pad), ap->ioaddr.data_addr); + } else { + pad = cpu_to_le16(inl(ap->ioaddr.data_addr)); + memcpy(buf + buflen - slop, &pad, slop); + } + } + local_irq_restore(flags); + } + else + ata_pio_data_xfer_noirq(adev, buf, buflen, write_data); +} + +static struct ata_port_operations pdc20230_port_ops = { + .set_piomode = pdc20230_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = pdc_data_xfer_vlb, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Holtek 6560A support + * + * This controller supports PIO0 to PIO2 (no IORDY even though higher timings + * can be loaded). + */ + +static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover; + struct ata_timing t; + + /* Get the timing data in cycles. For now play safe at 50Mhz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + + active = FIT(t.active, 2, 15); + recover = FIT(t.recover, 4, 15); + + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + + outb(recover << 4 | active, ap->ioaddr.device_addr); + inb(ap->ioaddr.status_addr); +} + +static struct ata_port_operations ht6560a_port_ops = { + .set_piomode = ht6560a_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, /* Check vlb/noirq */ + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Holtek 6560B support + * + * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting + * unless we see an ATAPI device in which case we force it off. + * + * FIXME: need to implement 2nd channel support. + */ + +static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover; + struct ata_timing t; + + /* Get the timing data in cycles. For now play safe at 50Mhz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + + active = FIT(t.active, 2, 15); + recover = FIT(t.recover, 2, 16); + recover &= 0x15; + + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + + outb(recover << 4 | active, ap->ioaddr.device_addr); + + if (adev->class != ATA_DEV_ATA) { + u8 rconf = inb(0x3E6); + if (rconf & 0x24) { + rconf &= ~ 0x24; + outb(rconf, 0x3E6); + } + } + inb(ap->ioaddr.status_addr); +} + +static struct ata_port_operations ht6560b_port_ops = { + .set_piomode = ht6560b_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, /* FIXME: Check 32bit and noirq */ + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Opti core chipset helpers + */ + +/** + * opti_syscfg - read OPTI chipset configuration + * @reg: Configuration register to read + * + * Returns the value of an OPTI system board configuration register. + */ + +static u8 opti_syscfg(u8 reg) +{ + unsigned long flags; + u8 r; + + /* Uniprocessor chipset and must force cycles adjancent */ + local_irq_save(flags); + outb(reg, 0x22); + r = inb(0x24); + local_irq_restore(flags); + return r; +} + +/* + * Opti 82C611A + * + * This controller supports PIO0 to PIO3. + */ + +static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover, setup; + struct ata_timing t; + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int khz[4] = { 50000, 40000, 33000, 25000 }; + u8 rc; + + /* Enter configuration mode */ + inw(ap->ioaddr.error_addr); + inw(ap->ioaddr.error_addr); + outb(3, ap->ioaddr.nsect_addr); + + /* Read VLB clock strapping */ + clock = 1000000000 / khz[inb(ap->ioaddr.lbah_addr) & 0x03]; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); + + /* Setup timing is shared */ + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); + + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + + active = FIT(t.active, 2, 17) - 2; + recover = FIT(t.recover, 1, 16) - 1; + setup = FIT(t.setup, 1, 4) - 1; + + /* Select the right timing bank for write timing */ + rc = inb(ap->ioaddr.lbal_addr); + rc &= 0x7F; + rc |= (adev->devno << 7); + outb(rc, ap->ioaddr.lbal_addr); + + /* Write the timings */ + outb(active << 4 | recover, ap->ioaddr.error_addr); + + /* Select the right bank for read timings, also + load the shared timings for address */ + rc = inb(ap->ioaddr.device_addr); + rc &= 0xC0; + rc |= adev->devno; /* Index select */ + rc |= (setup << 4) | 0x04; + outb(rc, ap->ioaddr.device_addr); + + /* Load the read timings */ + outb(active << 4 | recover, ap->ioaddr.data_addr); + + /* Ensure the timing register mode is right */ + rc = inb (ap->ioaddr.lbal_addr); + rc &= 0x73; + rc |= 0x84; + outb(rc, ap->ioaddr.lbal_addr); + + /* Exit command mode */ + outb(0x83, ap->ioaddr.nsect_addr); +} + + +static struct ata_port_operations opti82c611a_port_ops = { + .set_piomode = opti82c611a_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Opti 82C465MV + * + * This controller supports PIO0 to PIO3. Unlike the 611A the MVB + * version is dual channel but doesn't have a lot of unique registers. + */ + +static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover, setup; + struct ata_timing t; + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int khz[4] = { 50000, 40000, 33000, 25000 }; + u8 rc; + u8 sysclk; + + /* Get the clock */ + sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */ + + /* Enter configuration mode */ + inw(ap->ioaddr.error_addr); + inw(ap->ioaddr.error_addr); + outb(3, ap->ioaddr.nsect_addr); + + /* Read VLB clock strapping */ + clock = 1000000000 / khz[sysclk]; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); + + /* Setup timing is shared */ + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); + + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + + active = FIT(t.active, 2, 17) - 2; + recover = FIT(t.recover, 1, 16) - 1; + setup = FIT(t.setup, 1, 4) - 1; + + /* Select the right timing bank for write timing */ + rc = inb(ap->ioaddr.lbal_addr); + rc &= 0x7F; + rc |= (adev->devno << 7); + outb(rc, ap->ioaddr.lbal_addr); + + /* Write the timings */ + outb(active << 4 | recover, ap->ioaddr.error_addr); + + /* Select the right bank for read timings, also + load the shared timings for address */ + rc = inb(ap->ioaddr.device_addr); + rc &= 0xC0; + rc |= adev->devno; /* Index select */ + rc |= (setup << 4) | 0x04; + outb(rc, ap->ioaddr.device_addr); + + /* Load the read timings */ + outb(active << 4 | recover, ap->ioaddr.data_addr); + + /* Ensure the timing register mode is right */ + rc = inb (ap->ioaddr.lbal_addr); + rc &= 0x73; + rc |= 0x84; + outb(rc, ap->ioaddr.lbal_addr); + + /* Exit command mode */ + outb(0x83, ap->ioaddr.nsect_addr); + + /* We need to know this for quad device on the MVB */ + ap->host->private_data = ap; +} + +/** + * opt82c465mv_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. The + * MVB has a single set of timing registers and these are shared + * across channels. As there are two registers we really ought to + * track the last two used values as a sort of register window. For + * now we just reload on a channel switch. On the single channel + * setup this condition never fires so we do nothing extra. + * + * FIXME: dual channel needs ->serialize support + */ + +static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If timings are set and for the wrong channel (2nd test is + due to a libata shortcoming and will eventually go I hope) */ + if (ap->host->private_data != ap->host + && ap->host->private_data != NULL) + opti82c46x_set_piomode(ap, adev); + + return ata_qc_issue_prot(qc); +} + +static struct ata_port_operations opti82c46x_port_ops = { + .set_piomode = opti82c46x_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = opti82c46x_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + + +/** + * legacy_init_one - attach a legacy interface + * @port: port number + * @io: I/O port start + * @ctrl: control port + * @irq: interrupt line + * + * Register an ISA bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + */ + +static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq) +{ + struct legacy_data *ld = &legacy_data[nr_legacy_host]; + struct ata_probe_ent ae; + struct platform_device *pdev; + int ret = -EBUSY; + struct ata_port_operations *ops = &legacy_port_ops; + int pio_modes = pio_mask; + u32 mask = (1 << port); + + if (request_region(io, 8, "pata_legacy") == NULL) + return -EBUSY; + if (request_region(ctrl, 1, "pata_legacy") == NULL) + goto fail_io; + + pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0); + if (pdev == NULL) + goto fail_dev; + + if (ht6560a & mask) { + ops = &ht6560a_port_ops; + pio_modes = 0x07; + } + if (ht6560b & mask) { + ops = &ht6560b_port_ops; + pio_modes = 0x1F; + } + if (opti82c611a & mask) { + ops = &opti82c611a_port_ops; + pio_modes = 0x0F; + } + if (opti82c46x & mask) { + ops = &opti82c46x_port_ops; + pio_modes = 0x0F; + } + + /* Probe for automatically detectable controllers */ + + if (io == 0x1F0 && ops == &legacy_port_ops) { + unsigned long flags; + + local_irq_save(flags); + + /* Probes */ + inb(0x1F5); + outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F2); + inb(0x3F6); + inb(0x3F6); + inb(0x1F2); + inb(0x1F2); + + if ((inb(0x1F2) & 0x80) == 0) { + /* PDC20230c or 20630 ? */ + printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n"); + pio_modes = 0x07; + ops = &pdc20230_port_ops; + udelay(100); + inb(0x1F5); + } else { + outb(0x55, 0x1F2); + inb(0x1F2); + inb(0x1F2); + if (inb(0x1F2) == 0x00) { + printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n"); + } + } + local_irq_restore(flags); + } + + + /* Chip does mode setting by command snooping */ + if (ops == &legacy_port_ops && (autospeed & mask)) + ops = &simple_port_ops; + memset(&ae, 0, sizeof(struct ata_probe_ent)); + INIT_LIST_HEAD(&ae.node); + ae.dev = &pdev->dev; + ae.port_ops = ops; + ae.sht = &legacy_sht; + ae.n_ports = 1; + ae.pio_mask = pio_modes; + ae.irq = irq; + ae.irq_flags = 0; + ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST; + ae.port[0].cmd_addr = io; + ae.port[0].altstatus_addr = ctrl; + ae.port[0].ctl_addr = ctrl; + ata_std_ports(&ae.port[0]); + ae.private_data = ld; + + ret = ata_device_add(&ae); + if (ret == 0) { + ret = -ENODEV; + goto fail; + } + legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev); + ld->platform_dev = pdev; + return 0; + +fail: + platform_device_unregister(pdev); +fail_dev: + release_region(ctrl, 1); +fail_io: + release_region(io, 8); + return ret; +} + +/** + * legacy_check_special_cases - ATA special cases + * @p: PCI device to check + * @master: set this if we find an ATA master + * @master: set this if we find an ATA secondary + * + * A small number of vendors implemented early PCI ATA interfaces on bridge logic + * without the ATA interface being PCI visible. Where we have a matching PCI driver + * we must skip the relevant device here. If we don't know about it then the legacy + * driver is the right driver anyway. + */ + +static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary) +{ + /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */ + if (p->vendor == 0x1078 && p->device == 0x0000) { + *primary = *secondary = 1; + return; + } + /* Cyrix CS5520 pre SFF MWDMA ATA on the bridge */ + if (p->vendor == 0x1078 && p->device == 0x0002) { + *primary = *secondary = 1; + return; + } + /* Intel MPIIX - PIO ATA on non PCI side of bridge */ + if (p->vendor == 0x8086 && p->device == 0x1234) { + u16 r; + pci_read_config_word(p, 0x6C, &r); + if (r & 0x8000) { /* ATA port enabled */ + if (r & 0x4000) + *secondary = 1; + else + *primary = 1; + } + return; + } +} + + +/** + * legacy_init - attach legacy interfaces + * + * Attach legacy IDE interfaces by scanning the usual IRQ/port suspects. + * Right now we do not scan the ide0 and ide1 address but should do so + * for non PCI systems or systems with no PCI IDE legacy mode devices. + * If you fix that note there are special cases to consider like VLB + * drivers and CS5510/20. + */ + +static __init int legacy_init(void) +{ + int i; + int ct = 0; + int primary = 0; + int secondary = 0; + int last_port = NR_HOST; + + struct pci_dev *p = NULL; + + for_each_pci_dev(p) { + int r; + /* Check for any overlap of the system ATA mappings. Native mode controllers + stuck on these addresses or some devices in 'raid' mode won't be found by + the storage class test */ + for (r = 0; r < 6; r++) { + if (pci_resource_start(p, r) == 0x1f0) + primary = 1; + if (pci_resource_start(p, r) == 0x170) + secondary = 1; + } + /* Check for special cases */ + legacy_check_special_cases(p, &primary, &secondary); + + /* If PCI bus is present then don't probe for tertiary legacy ports */ + if (probe_all == 0) + last_port = 2; + } + + /* If an OPTI 82C46X is present find out where the channels are */ + if (opti82c46x) { + static const char *optis[4] = { + "3/463MV", "5MV", + "5MVA", "5MVB" + }; + u8 chans = 1; + u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; + + opti82c46x = 3; /* Assume master and slave first */ + printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]); + if (ctrl == 3) + chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; + ctrl = opti_syscfg(0xAC); + /* Check enabled and this port is the 465MV port. On the + MVB we may have two channels */ + if (ctrl & 8) { + if (ctrl & 4) + opti82c46x = 2; /* Slave */ + else + opti82c46x = 1; /* Master */ + if (chans == 2) + opti82c46x = 3; /* Master and Slave */ + } /* Slave only */ + else if (chans == 1) + opti82c46x = 1; + } + + for (i = 0; i < last_port; i++) { + /* Skip primary if we have seen a PCI one */ + if (i == 0 && primary == 1) + continue; + /* Skip secondary if we have seen a PCI one */ + if (i == 1 && secondary == 1) + continue; + if (legacy_init_one(i, legacy_port[i], + legacy_port[i] + 0x0206, + legacy_irq[i]) == 0) + ct++; + } + if (ct != 0) + return 0; + return -ENODEV; +} + +static __exit void legacy_exit(void) +{ + int i; + + for (i = 0; i < nr_legacy_host; i++) { + struct legacy_data *ld = &legacy_data[i]; + struct ata_port *ap =legacy_host[i]->ports[0]; + unsigned long io = ap->ioaddr.cmd_addr; + unsigned long ctrl = ap->ioaddr.ctl_addr; + ata_host_remove(legacy_host[i]); + platform_device_unregister(ld->platform_dev); + if (ld->timing) + release_region(ld->timing, 2); + release_region(io, 8); + release_region(ctrl, 1); + } +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for legacy ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_param(probe_all, int, 0); +module_param(autospeed, int, 0); +module_param(ht6560a, int, 0); +module_param(ht6560b, int, 0); +module_param(opti82c611a, int, 0); +module_param(opti82c46x, int, 0); +module_param(pio_mask, int, 0); + +module_init(legacy_init); +module_exit(legacy_exit); + diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c new file mode 100644 index 0000000..1958c4e --- /dev/null +++ b/drivers/ata/pata_mpiix.c @@ -0,0 +1,313 @@ +/* + * pata_mpiix.c - Intel MPIIX PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * The MPIIX is different enough to the PIIX4 and friends that we give it + * a separate driver. The old ide/pci code handles this by just not tuning + * MPIIX at all. + * + * The MPIIX also differs in another important way from the majority of PIIX + * devices. The chip is a bridge (pardon the pun) between the old world of + * ISA IDE and PCI IDE. Although the ATA timings are PCI configured the actual + * IDE controller is not decoded in PCI space and the chip does not claim to + * be IDE class PCI. This requires slightly non-standard probe logic compared + * with PCI IDE and also that we do not disable the device when our driver is + * unloaded (as it has many other functions). + * + * The driver conciously keeps this logic internally to avoid pushing quirky + * PATA history into the clean libata layer. + * + * Thinkpad specific note: If you boot an MPIIX using thinkpad with a PCMCIA + * hard disk present this driver will not detect it. This is not a bug. In this + * configuration the secondary port of the MPIIX is disabled and the addresses + * are decoded by the PCMCIA bridge and therefore are for a generic IDE driver + * to operate. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_mpiix" +#define DRV_VERSION "0.7.1" + +enum { + IDETIM = 0x6C, /* IDE control register */ + IORDY = (1 << 1), + PPE = (1 << 2), + FTIM = (1 << 0), + ENABLED = (1 << 15), + SECONDARY = (1 << 14) +}; + +static int mpiix_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits mpiix_enable_bits[] = { + { 0x6D, 1, 0x80, 0x80 }, + { 0x6F, 1, 0x80, 0x80 } + }; + + if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * mpiix_error_handler - probe reset + * @ap: ATA port + * + * Perform the ATA probe and bus reset sequence plus specific handling + * for this hardware. The MPIIX has the enable bits in a different place + * to PIIX4 and friends. As a pure PIO device it has no cable detect + */ + +static void mpiix_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, mpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * mpiix_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. The MPIIX allows us to program the + * IORDY sample point (2-5 clocks), recovery 1-4 clocks and whether + * prefetching or iordy are used. + * + * This would get very ugly because we can only program timing for one + * device at a time, the other gets PIO0. Fortunately libata calls + * our qc_issue_prot command before a command is issued so we can + * flip the timings back and forth to reduce the pain. + */ + +static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int control = 0; + int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 idetim; + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(pdev, IDETIM, &idetim); + /* Mask the IORDY/TIME/PPE0 bank for this device */ + if (adev->class == ATA_DEV_ATA) + control |= PPE; /* PPE enable for disk */ + if (ata_pio_need_iordy(adev)) + control |= IORDY; /* IORDY */ + if (pio > 0) + control |= FTIM; /* This drive is on the fast timing bank */ + + /* Mask out timing and clear both TIME bank selects */ + idetim &= 0xCCEE; + idetim &= ~(0x07 << (2 * adev->devno)); + idetim |= (control << (2 * adev->devno)); + + idetim |= (timings[pio][0] << 12) | (timings[pio][1] << 8); + pci_write_config_word(pdev, IDETIM, idetim); + + /* We use ap->private_data as a pointer to the device currently + loaded for timing */ + ap->private_data = adev; +} + +/** + * mpiix_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * that, even if we get this wrong, cycles to the other device will + * be made PIO0. + */ + +static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If modes have been configured and the channel data is not loaded + then load it. We have to check if pio_mode is set as the core code + does not set adev->pio_mode to XFER_PIO_0 while probing as would be + logical */ + + if (adev->pio_mode && adev != ap->private_data) + mpiix_set_piomode(ap, adev); + + return ata_qc_issue_prot(qc); +} + +static struct scsi_host_template mpiix_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations mpiix_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = mpiix_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = mpiix_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = mpiix_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + /* Single threaded by the PCI probe logic */ + static struct ata_probe_ent probe[2]; + static int printed_version; + u16 idetim; + int enabled; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); + + /* MPIIX has many functions which can be turned on or off according + to other devices present. Make sure IDE is enabled before we try + and use it */ + + pci_read_config_word(dev, IDETIM, &idetim); + if (!(idetim & ENABLED)) + return -ENODEV; + + /* We do our own plumbing to avoid leaking special cases for whacko + ancient hardware into the core code. There are two issues to + worry about. #1 The chip is a bridge so if in legacy mode and + without BARs set fools the setup. #2 If you pci_disable_device + the MPIIX your box goes castors up */ + + INIT_LIST_HEAD(&probe[0].node); + probe[0].dev = pci_dev_to_dev(dev); + probe[0].port_ops = &mpiix_port_ops; + probe[0].sht = &mpiix_sht; + probe[0].pio_mask = 0x1F; + probe[0].irq = 14; + probe[0].irq_flags = SA_SHIRQ; + probe[0].port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; + probe[0].n_ports = 1; + probe[0].port[0].cmd_addr = 0x1F0; + probe[0].port[0].ctl_addr = 0x3F6; + probe[0].port[0].altstatus_addr = 0x3F6; + + /* The secondary lurks at different addresses but is otherwise + the same beastie */ + + INIT_LIST_HEAD(&probe[1].node); + probe[1] = probe[0]; + probe[1].irq = 15; + probe[1].port[0].cmd_addr = 0x170; + probe[1].port[0].ctl_addr = 0x376; + probe[1].port[0].altstatus_addr = 0x376; + + /* Let libata fill in the port details */ + ata_std_ports(&probe[0].port[0]); + ata_std_ports(&probe[1].port[0]); + + /* Now add the port that is active */ + enabled = (idetim & SECONDARY) ? 1 : 0; + + if (ata_device_add(&probe[enabled])) + return 0; + return -ENODEV; +} + +/** + * mpiix_remove_one - device unload + * @pdev: PCI device being removed + * + * Handle an unplug/unload event for a PCI device. Unload the + * PCI driver but do not use the default handler as we *MUST NOT* + * disable the device as it has other functions. + */ + +static void __devexit mpiix_remove_one(struct pci_dev *pdev) +{ + struct device *dev = pci_dev_to_dev(pdev); + struct ata_host *host = dev_get_drvdata(dev); + + ata_host_remove(host); + dev_set_drvdata(dev, NULL); +} + + + +static const struct pci_device_id mpiix[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371MX), }, + { 0, }, +}; + +static struct pci_driver mpiix_pci_driver = { + .name = DRV_NAME, + .id_table = mpiix, + .probe = mpiix_init_one, + .remove = mpiix_remove_one +}; + +static int __init mpiix_init(void) +{ + return pci_register_driver(&mpiix_pci_driver); +} + + +static void __exit mpiix_exit(void) +{ + pci_unregister_driver(&mpiix_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Intel MPIIX"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, mpiix); +MODULE_VERSION(DRV_VERSION); + +module_init(mpiix_init); +module_exit(mpiix_exit); diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c new file mode 100644 index 0000000..16cb254 --- /dev/null +++ b/drivers/ata/pata_netcell.c @@ -0,0 +1,175 @@ +/* + * pata_netcell.c - Netcell PATA driver + * + * (c) 2006 Red Hat <alan@redhat.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/ata.h> + +#define DRV_NAME "pata_netcell" +#define DRV_VERSION "0.1.5" + +/** + * netcell_probe_init - check for 40/80 pin + * @ap: Port + * + * Cables are handled by the RAID controller. Report 80 pin. + */ + +static int netcell_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * netcell_probe_reset - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void netcell_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, netcell_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/* No PIO or DMA methods needed for this device */ + +static struct scsi_host_template netcell_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + /* Special handling needed if you have sector or LBA48 limits */ + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + /* Use standard CHS mapping rules */ + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations netcell_ops = { + .port_disable = ata_port_disable, + + /* Task file is PCI ATA format, use helpers */ + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = netcell_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + /* BMDMA handling is PCI ATA format, use helpers */ + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + /* Timeout handling. Special recovery hooks here */ + .eng_timeout = ata_eng_timeout, + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + /* Generic PATA PCI ATA helpers */ + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * netcell_init_one - Register Netcell ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in netcell_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info info = { + .sht = &netcell_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + /* Actually we don't really care about these as the + firmware deals with it */ + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* UDMA 133 */ + .port_ops = &netcell_ops, + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + /* Any chip specific setup/optimisation/messages here */ + ata_pci_clear_simplex(pdev); + + /* And let the library code do the work */ + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id netcell_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NETCELL, PCI_DEVICE_ID_REVOLUTION), }, + { } /* terminate list */ +}; + +static struct pci_driver netcell_pci_driver = { + .name = DRV_NAME, + .id_table = netcell_pci_tbl, + .probe = netcell_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init netcell_init(void) +{ + return pci_register_driver(&netcell_pci_driver); +} + +static void __exit netcell_exit(void) +{ + pci_unregister_driver(&netcell_pci_driver); +} + +module_init(netcell_init); +module_exit(netcell_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, netcell_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c new file mode 100644 index 0000000..93d6646 --- /dev/null +++ b/drivers/ata/pata_ns87410.c @@ -0,0 +1,236 @@ +/* + * pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer + * (C) 2006 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_ns87410" +#define DRV_VERSION "0.4.2" + +/** + * ns87410_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int ns87410_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits ns87410_enable_bits[] = { + { 0x43, 1, 0x08, 0x08 }, + { 0x47, 1, 0x08, 0x08 } + }; + + if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * ns87410_error_handler - probe reset + * @ap: ATA port + * + * Perform the ATA probe and bus reset sequence plus specific handling + * for this hardware. The MPIIX has the enable bits in a different place + * to PIIX4 and friends. As a pure PIO device it has no cable detect + */ + +static void ns87410_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ns87410_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * ns87410_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program timing data. This is kept per channel not per device, + * and only affects the data port. + */ + +static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x40 + 4 * ap->port_no; + u8 idetcr, idefr; + struct ata_timing at; + + static const u8 activebits[15] = { + 0, 1, 2, 3, 4, + 5, 5, 6, 6, 6, + 6, 7, 7, 7, 7 + }; + + static const u8 recoverbits[12] = { + 0, 1, 2, 3, 4, 5, 6, 6, 7, 7, 7, 7 + }; + + pci_read_config_byte(pdev, port + 3, &idefr); + + if (ata_pio_need_iordy(adev)) + idefr |= 0x04; /* IORDY enable */ + else + idefr &= ~0x04; + + if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) { + dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", adev->pio_mode); + return; + } + + at.active = FIT(at.active, 2, 16) - 2; + at.setup = FIT(at.setup, 1, 4) - 1; + at.recover = FIT(at.recover, 1, 12) - 1; + + idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active]; + + pci_write_config_byte(pdev, port, idetcr); + pci_write_config_byte(pdev, port + 3, idefr); + /* We use ap->private_data as a pointer to the device currently + loaded for timing */ + ap->private_data = adev; +} + +/** + * ns87410_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. + */ + +static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If modes have been configured and the channel data is not loaded + then load it. We have to check if pio_mode is set as the core code + does not set adev->pio_mode to XFER_PIO_0 while probing as would be + logical */ + + if (adev->pio_mode && adev != ap->private_data) + ns87410_set_piomode(ap, adev); + + return ata_qc_issue_prot(qc); +} + +static struct scsi_host_template ns87410_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations ns87410_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = ns87410_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ns87410_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ns87410_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &ns87410_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x0F, + .port_ops = &ns87410_port_ops + }; + static struct ata_port_info *port_info[2] = {&info, &info}; + return ata_pci_init_one(dev, port_info, 2); +} + +static const struct pci_device_id ns87410[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410), }, + { 0, }, +}; + +static struct pci_driver ns87410_pci_driver = { + .name = DRV_NAME, + .id_table = ns87410, + .probe = ns87410_init_one, + .remove = ata_pci_remove_one +}; + +static int __init ns87410_init(void) +{ + return pci_register_driver(&ns87410_pci_driver); +} + + +static void __exit ns87410_exit(void) +{ + pci_unregister_driver(&ns87410_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Nat Semi 87410"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ns87410); +MODULE_VERSION(DRV_VERSION); + +module_init(ns87410_init); +module_exit(ns87410_exit); diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c new file mode 100644 index 0000000..04c618a --- /dev/null +++ b/drivers/ata/pata_oldpiix.c @@ -0,0 +1,339 @@ +/* + * pata_oldpiix.c - Intel PATA/SATA controllers + * + * (C) 2005 Red Hat <alan@redhat.com> + * + * Some parts based on ata_piix.c by Jeff Garzik and others. + * + * Early PIIX differs significantly from the later PIIX as it lacks + * SITRE and the slave timing registers. This means that you have to + * set timing per channel, or be clever. Libata tells us whenever it + * does drive selection and we use this to reload the timings. + * + * Because of these behaviour differences PIIX gets its own driver module. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/ata.h> + +#define DRV_NAME "pata_oldpiix" +#define DRV_VERSION "0.5.1" + +/** + * oldpiix_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int oldpiix_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits oldpiix_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ + }; + + if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * oldpiix_pata_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * @classes: + * + * LOCKING: + * None (inherited from caller). + */ + +static void oldpiix_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, oldpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * oldpiix_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; + u16 idetm_data; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. Note that the early PIIX does not have the slave + * timing port at 0x44. + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + if (pio > 2) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE IORDY */ + + /* Intel specifies that the PPE functionality is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + + pci_read_config_word(dev, idetm_port, &idetm_data); + + /* Enable PPE, IE and TIME as appropriate. Clear the other + drive timing bits */ + if (adev->devno == 0) { + idetm_data &= 0xCCE0; + idetm_data |= control; + } else { + idetm_data &= 0xCC0E; + idetm_data |= (control << 4); + } + idetm_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + pci_write_config_word(dev, idetm_port, idetm_data); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * oldpiix_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * @isich: True if the device is an ICH and has IOCFG registers + * + * Set MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u8 idetm_port = ap->port_no ? 0x42 : 0x40; + u16 idetm_data; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + pci_read_config_word(dev, idetm_port, &idetm_data); + + control = 3; /* IORDY|TIME0 */ + /* Intel specifies that the PPE functionality is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + /* Mask out the relevant control and timing bits we will load. Also + clear the other drive TIME register as a precaution */ + if (adev->devno == 0) { + idetm_data &= 0xCCE0; + idetm_data |= control; + } else { + idetm_data &= 0xCC0E; + idetm_data |= (control << 4); + } + idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); + pci_write_config_word(dev, idetm_port, idetm_data); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * oldpiix_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * that, even if we get this wrong, cycles to the other device will + * be made PIO0. + */ + +static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + if (adev != ap->private_data) { + if (adev->dma_mode) + oldpiix_set_dmamode(ap, adev); + else if (adev->pio_mode) + oldpiix_set_piomode(ap, adev); + } + return ata_qc_issue_prot(qc); +} + + +static struct scsi_host_template oldpiix_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations oldpiix_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = oldpiix_set_piomode, + .set_dmamode = oldpiix_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = oldpiix_pata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = oldpiix_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * oldpiix_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in oldpiix_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info info = { + .sht = &oldpiix_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma1-2 */ + .port_ops = &oldpiix_pata_ops, + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id oldpiix_pci_tbl[] = { + { PCI_DEVICE(0x8086, 0x1230), }, + { } /* terminate list */ +}; + +static struct pci_driver oldpiix_pci_driver = { + .name = DRV_NAME, + .id_table = oldpiix_pci_tbl, + .probe = oldpiix_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init oldpiix_init(void) +{ + return pci_register_driver(&oldpiix_pci_driver); +} + +static void __exit oldpiix_exit(void) +{ + pci_unregister_driver(&oldpiix_pci_driver); +} + + +module_init(oldpiix_init); +module_exit(oldpiix_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for early PIIX series controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, oldpiix_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c new file mode 100644 index 0000000..c3d0132 --- /dev/null +++ b/drivers/ata/pata_opti.c @@ -0,0 +1,292 @@ +/* + * pata_opti.c - ATI PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * Based on + * linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002 + * + * Copyright (C) 1996-1998 Linus Torvalds & authors (see below) + * + * Authors: + * Jaromir Koutek <miri@punknet.cz>, + * Jan Harkes <jaharkes@cwi.nl>, + * Mark Lord <mlord@pobox.com> + * Some parts of code are from ali14xx.c and from rz1000.c. + * + * Also consulted the FreeBSD prototype driver by Kevin Day to try + * and resolve some confusions. Further documentation can be found in + * Ralf Brown's interrupt list + * + * If you have other variants of the Opti range (Viper/Vendetta) please + * try this driver with those PCI idents and report back. For the later + * chips see the pata_optidma driver + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_opti" +#define DRV_VERSION "0.2.4" + +enum { + READ_REG = 0, /* index of Read cycle timing register */ + WRITE_REG = 1, /* index of Write cycle timing register */ + CNTRL_REG = 3, /* index of Control register */ + STRAP_REG = 5, /* index of Strap register */ + MISC_REG = 6 /* index of Miscellaneous register */ +}; + +/** + * opti_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int opti_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits opti_enable_bits[] = { + { 0x45, 1, 0x80, 0x00 }, + { 0x40, 1, 0x08, 0x00 } + }; + + if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * opti_probe_reset - probe reset + * @ap: ATA port + * + * Perform the ATA probe and bus reset sequence plus specific handling + * for this hardware. The Opti needs little handling - we have no UDMA66 + * capability that needs cable detection. All we must do is check the port + * is enabled. + */ + +static void opti_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, opti_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * opti_write_reg - control register setup + * @ap: ATA port + * @value: value + * @reg: control register number + * + * The Opti uses magic 'trapdoor' register accesses to do configuration + * rather than using PCI space as other controllers do. The double inw + * on the error register activates configuration mode. We can then write + * the control register + */ + +static void opti_write_reg(struct ata_port *ap, u8 val, int reg) +{ + unsigned long regio = ap->ioaddr.cmd_addr; + + /* These 3 unlock the control register access */ + inw(regio + 1); + inw(regio + 1); + outb(3, regio + 2); + + /* Do the I/O */ + outb(val, regio + reg); + + /* Relock */ + outb(0x83, regio + 2); +} + +#if 0 +/** + * opti_read_reg - control register read + * @ap: ATA port + * @reg: control register number + * + * The Opti uses magic 'trapdoor' register accesses to do configuration + * rather than using PCI space as other controllers do. The double inw + * on the error register activates configuration mode. We can then read + * the control register + */ + +static u8 opti_read_reg(struct ata_port *ap, int reg) +{ + unsigned long regio = ap->ioaddr.cmd_addr; + u8 ret; + inw(regio + 1); + inw(regio + 1); + outb(3, regio + 2); + ret = inb(regio + reg); + outb(0x83, regio + 2); +} +#endif + +/** + * opti_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Timing numbers are taken from + * the FreeBSD driver then pre computed to keep the code clean. There + * are two tables depending on the hardware clock speed. + */ + +static void opti_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int pio = adev->pio_mode - XFER_PIO_0; + unsigned long regio = ap->ioaddr.cmd_addr; + u8 addr; + + /* Address table precomputed with prefetch off and a DCLK of 2 */ + static const u8 addr_timing[2][5] = { + { 0x30, 0x20, 0x20, 0x10, 0x10 }, + { 0x20, 0x20, 0x10, 0x10, 0x10 } + }; + static const u8 data_rec_timing[2][5] = { + { 0x6B, 0x56, 0x42, 0x32, 0x31 }, + { 0x58, 0x44, 0x32, 0x22, 0x21 } + }; + + outb(0xff, regio + 5); + clock = inw(regio + 5) & 1; + + /* + * As with many controllers the address setup time is shared + * and must suit both devices if present. + */ + + addr = addr_timing[clock][pio]; + if (pair) { + /* Hardware constraint */ + u8 pair_addr = addr_timing[clock][pair->pio_mode - XFER_PIO_0]; + if (pair_addr > addr) + addr = pair_addr; + } + + /* Commence primary programming sequence */ + opti_write_reg(ap, adev->devno, MISC_REG); + opti_write_reg(ap, data_rec_timing[clock][pio], READ_REG); + opti_write_reg(ap, data_rec_timing[clock][pio], WRITE_REG); + opti_write_reg(ap, addr, MISC_REG); + + /* Programming sequence complete, override strapping */ + opti_write_reg(ap, 0x85, CNTRL_REG); +} + +static struct scsi_host_template opti_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations opti_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = opti_set_piomode, +/* .set_dmamode = opti_set_dmamode, */ + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = opti_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &opti_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &opti_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + static int printed_version; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); + + return ata_pci_init_one(dev, port_info, 2); +} + +static const struct pci_device_id opti[] = { + { PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C621, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { 0, }, +}; + +static struct pci_driver opti_pci_driver = { + .name = DRV_NAME, + .id_table = opti, + .probe = opti_init_one, + .remove = ata_pci_remove_one +}; + +static int __init opti_init(void) +{ + return pci_register_driver(&opti_pci_driver); +} + + +static void __exit opti_exit(void) +{ + pci_unregister_driver(&opti_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Opti 621/621X"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, opti); +MODULE_VERSION(DRV_VERSION); + +module_init(opti_init); +module_exit(opti_exit); diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c new file mode 100644 index 0000000..177a455 --- /dev/null +++ b/drivers/ata/pata_optidma.c @@ -0,0 +1,547 @@ +/* + * pata_optidma.c - Opti DMA PATA for new ATA layer + * (C) 2006 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * The Opti DMA controllers are related to the older PIO PCI controllers + * and indeed the VLB ones. The main differences are that the timing + * numbers are now based off PCI clocks not VLB and differ, and that + * MWDMA is supported. + * + * This driver should support Viper-N+, FireStar, FireStar Plus. + * + * These devices support virtual DMA for read (aka the CS5520). Later + * chips support UDMA33, but only if the rest of the board logic does, + * so you have to get this right. We don't support the virtual DMA + * but we do handle UDMA. + * + * Bits that are worth knowing + * Most control registers are shadowed into I/O registers + * 0x1F5 bit 0 tells you if the PCI/VLB clock is 33 or 25Mhz + * Virtual DMA registers *move* between rev 0x02 and rev 0x10 + * UDMA requires a 66MHz FSB + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_optidma" +#define DRV_VERSION "0.2.1" + +enum { + READ_REG = 0, /* index of Read cycle timing register */ + WRITE_REG = 1, /* index of Write cycle timing register */ + CNTRL_REG = 3, /* index of Control register */ + STRAP_REG = 5, /* index of Strap register */ + MISC_REG = 6 /* index of Miscellaneous register */ +}; + +static int pci_clock; /* 0 = 33 1 = 25 */ + +/** + * optidma_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int optidma_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const struct pci_bits optidma_enable_bits = { + 0x40, 1, 0x08, 0x00 + }; + + if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits)) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * optidma_probe_reset - probe reset + * @ap: ATA port + * + * Perform the ATA probe and bus reset sequence plus specific handling + * for this hardware. The Opti needs little handling - we have no UDMA66 + * capability that needs cable detection. All we must do is check the port + * is enabled. + */ + +static void optidma_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, optidma_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * optidma_unlock - unlock control registers + * @ap: ATA port + * + * Unlock the control register block for this adapter. Registers must not + * be unlocked in a situation where libata might look at them. + */ + +static void optidma_unlock(struct ata_port *ap) +{ + unsigned long regio = ap->ioaddr.cmd_addr; + + /* These 3 unlock the control register access */ + inw(regio + 1); + inw(regio + 1); + outb(3, regio + 2); +} + +/** + * optidma_lock - issue temporary relock + * @ap: ATA port + * + * Re-lock the configuration register settings. + */ + +static void optidma_lock(struct ata_port *ap) +{ + unsigned long regio = ap->ioaddr.cmd_addr; + + /* Relock */ + outb(0x83, regio + 2); +} + +/** + * optidma_set_mode - set mode data + * @ap: ATA interface + * @adev: ATA device + * @mode: Mode to set + * + * Called to do the DMA or PIO mode setup. Timing numbers are all + * pre computed to keep the code clean. There are two tables depending + * on the hardware clock speed. + * + * WARNING: While we do this the IDE registers vanish. If we take an + * IRQ here we depend on the host set locking to avoid catastrophe. + */ + +static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode) +{ + struct ata_device *pair = ata_dev_pair(adev); + int pio = adev->pio_mode - XFER_PIO_0; + int dma = adev->dma_mode - XFER_MW_DMA_0; + unsigned long regio = ap->ioaddr.cmd_addr; + u8 addr; + + /* Address table precomputed with a DCLK of 2 */ + static const u8 addr_timing[2][5] = { + { 0x30, 0x20, 0x20, 0x10, 0x10 }, + { 0x20, 0x20, 0x10, 0x10, 0x10 } + }; + static const u8 data_rec_timing[2][5] = { + { 0x59, 0x46, 0x30, 0x20, 0x20 }, + { 0x46, 0x32, 0x20, 0x20, 0x10 } + }; + static const u8 dma_data_rec_timing[2][3] = { + { 0x76, 0x20, 0x20 }, + { 0x54, 0x20, 0x10 } + }; + + /* Switch from IDE to control mode */ + optidma_unlock(ap); + + + /* + * As with many controllers the address setup time is shared + * and must suit both devices if present. FIXME: Check if we + * need to look at slowest of PIO/DMA mode of either device + */ + + if (mode >= XFER_MW_DMA_0) + addr = 0; + else + addr = addr_timing[pci_clock][pio]; + + if (pair) { + u8 pair_addr; + /* Hardware constraint */ + if (pair->dma_mode) + pair_addr = 0; + else + pair_addr = addr_timing[pci_clock][pair->pio_mode - XFER_PIO_0]; + if (pair_addr > addr) + addr = pair_addr; + } + + /* Commence primary programming sequence */ + /* First we load the device number into the timing select */ + outb(adev->devno, regio + MISC_REG); + /* Now we load the data timings into read data/write data */ + if (mode < XFER_MW_DMA_0) { + outb(data_rec_timing[pci_clock][pio], regio + READ_REG); + outb(data_rec_timing[pci_clock][pio], regio + WRITE_REG); + } else if (mode < XFER_UDMA_0) { + outb(dma_data_rec_timing[pci_clock][dma], regio + READ_REG); + outb(dma_data_rec_timing[pci_clock][dma], regio + WRITE_REG); + } + /* Finally we load the address setup into the misc register */ + outb(addr | adev->devno, regio + MISC_REG); + + /* Programming sequence complete, timing 0 dev 0, timing 1 dev 1 */ + outb(0x85, regio + CNTRL_REG); + + /* Switch back to IDE mode */ + optidma_lock(ap); + + /* Note: at this point our programming is incomplete. We are + not supposed to program PCI 0x43 "things we hacked onto the chip" + until we've done both sets of PIO/DMA timings */ +} + +/** + * optiplus_set_mode - DMA setup for Firestar Plus + * @ap: ATA port + * @adev: device + * @mode: desired mode + * + * The Firestar plus has additional UDMA functionality for UDMA0-2 and + * requires we do some additional work. Because the base work we must do + * is mostly shared we wrap the Firestar setup functionality in this + * one + */ + +static void optiplus_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 udcfg; + u8 udslave; + int dev2 = 2 * adev->devno; + int unit = 2 * ap->port_no + adev->devno; + int udma = mode - XFER_UDMA_0; + + pci_read_config_byte(pdev, 0x44, &udcfg); + if (mode <= XFER_UDMA_0) { + udcfg &= ~(1 << unit); + optidma_set_mode(ap, adev, adev->dma_mode); + } else { + udcfg |= (1 << unit); + if (ap->port_no) { + pci_read_config_byte(pdev, 0x45, &udslave); + udslave &= ~(0x03 << dev2); + udslave |= (udma << dev2); + pci_write_config_byte(pdev, 0x45, udslave); + } else { + udcfg &= ~(0x30 << dev2); + udcfg |= (udma << dev2); + } + } + pci_write_config_byte(pdev, 0x44, udcfg); +} + +/** + * optidma_set_pio_mode - PIO setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optidma_set_pio_mode(struct ata_port *ap, struct ata_device *adev) +{ + optidma_set_mode(ap, adev, adev->pio_mode); +} + +/** + * optidma_set_dma_mode - DMA setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optidma_set_dma_mode(struct ata_port *ap, struct ata_device *adev) +{ + optidma_set_mode(ap, adev, adev->dma_mode); +} + +/** + * optiplus_set_pio_mode - PIO setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optiplus_set_pio_mode(struct ata_port *ap, struct ata_device *adev) +{ + optiplus_set_mode(ap, adev, adev->pio_mode); +} + +/** + * optiplus_set_dma_mode - DMA setup callback + * @ap: ATA port + * @adev: Device + * + * The libata core provides separate functions for handling PIO and + * DMA programming. The architecture of the Firestar makes it easier + * for us to have a common function so we provide wrappers + */ + +static void optiplus_set_dma_mode(struct ata_port *ap, struct ata_device *adev) +{ + optiplus_set_mode(ap, adev, adev->dma_mode); +} + +/** + * optidma_make_bits - PCI setup helper + * @adev: ATA device + * + * Turn the ATA device setup into PCI configuration bits + * for register 0x43 and return the two bits needed. + */ + +static u8 optidma_make_bits43(struct ata_device *adev) +{ + static const u8 bits43[5] = { + 0, 0, 0, 1, 2 + }; + if (!ata_dev_enabled(adev)) + return 0; + if (adev->dma_mode) + return adev->dma_mode - XFER_MW_DMA_0; + return bits43[adev->pio_mode - XFER_PIO_0]; +} + +/** + * optidma_post_set_mode - finalize PCI setup + * @ap: port to set up + * + * Finalise the configuration by writing the nibble of extra bits + * of data into the chip. + */ + +static void optidma_post_set_mode(struct ata_port *ap) +{ + u8 r; + int nybble = 4 * ap->port_no; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x43, &r); + + r &= (0x0F << nybble); + r |= (optidma_make_bits43(&ap->device[0]) + + (optidma_make_bits43(&ap->device[0]) << 2)) << nybble; + + pci_write_config_byte(pdev, 0x43, r); +} + +static struct scsi_host_template optidma_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations optidma_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = optidma_set_pio_mode, + .set_dmamode = optidma_set_dma_mode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .error_handler = optidma_error_handler, + .post_set_mode = optidma_post_set_mode, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations optiplus_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = optiplus_set_pio_mode, + .set_dmamode = optiplus_set_dma_mode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .error_handler = optidma_error_handler, + .post_set_mode = optidma_post_set_mode, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * optiplus_with_udma - Look for UDMA capable setup + * @pdev; ATA controller + */ + +static int optiplus_with_udma(struct pci_dev *pdev) +{ + u8 r; + int ret = 0; + int ioport = 0x22; + struct pci_dev *dev1; + + /* Find function 1 */ + dev1 = pci_get_device(0x1045, 0xC701, NULL); + if(dev1 == NULL) + return 0; + + /* Rev must be >= 0x10 */ + pci_read_config_byte(dev1, 0x08, &r); + if (r < 0x10) + goto done_nomsg; + /* Read the chipset system configuration to check our mode */ + pci_read_config_byte(dev1, 0x5F, &r); + ioport |= (r << 8); + outb(0x10, ioport); + /* Must be 66Mhz sync */ + if ((inb(ioport + 2) & 1) == 0) + goto done; + + /* Check the ATA arbitration/timing is suitable */ + pci_read_config_byte(pdev, 0x42, &r); + if ((r & 0x36) != 0x36) + goto done; + pci_read_config_byte(dev1, 0x52, &r); + if (r & 0x80) /* IDEDIR disabled */ + ret = 1; +done: + printk(KERN_WARNING "UDMA not supported in this configuration.\n"); +done_nomsg: /* Wrong chip revision */ + pci_dev_put(dev1); + return ret; +} + +static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info_82c700 = { + .sht = &optidma_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &optidma_port_ops + }; + static struct ata_port_info info_82c700_udma = { + .sht = &optidma_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, + .port_ops = &optiplus_port_ops + }; + static struct ata_port_info *port_info[2]; + struct ata_port_info *info = &info_82c700; + static int printed_version; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); + + /* Fixed location chipset magic */ + inw(0x1F1); + inw(0x1F1); + pci_clock = inb(0x1F5) & 1; /* 0 = 33Mhz, 1 = 25Mhz */ + + if (optiplus_with_udma(dev)) + info = &info_82c700_udma; + + port_info[0] = port_info[1] = info; + return ata_pci_init_one(dev, port_info, 2); +} + +static const struct pci_device_id optidma[] = { + { PCI_DEVICE(0x1045, 0xD568), }, /* Opti 82C700 */ + { 0, }, +}; + +static struct pci_driver optidma_pci_driver = { + .name = DRV_NAME, + .id_table = optidma, + .probe = optidma_init_one, + .remove = ata_pci_remove_one +}; + +static int __init optidma_init(void) +{ + return pci_register_driver(&optidma_pci_driver); +} + + +static void __exit optidma_exit(void) +{ + pci_unregister_driver(&optidma_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Opti Firestar/Firestar Plus"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, optidma); +MODULE_VERSION(DRV_VERSION); + +module_init(optidma_init); +module_exit(optidma_exit); diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c new file mode 100644 index 0000000..62b25cd --- /dev/null +++ b/drivers/ata/pata_pcmcia.c @@ -0,0 +1,393 @@ +/* + * pata_pcmcia.c - PCMCIA PATA controller driver. + * Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz + * <openembedded@hrw.one.pl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Heavily based upon ide-cs.c + * The initial developer of the original code is David A. Hinds + * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/ata.h> +#include <linux/libata.h> + +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/ds.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ciscode.h> + + +#define DRV_NAME "pata_pcmcia" +#define DRV_VERSION "0.2.9" + +/* + * Private data structure to glue stuff together + */ + +struct ata_pcmcia_info { + struct pcmcia_device *pdev; + int ndev; + dev_node_t node; +}; + +static struct scsi_host_template pcmcia_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations pcmcia_port_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer_noirq, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +#define CS_CHECK(fn, ret) \ +do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +/** + * pcmcia_init_one - attach a PCMCIA interface + * @pdev: pcmcia device + * + * Register a PCMCIA IDE interface. Such interfaces are PIO 0 and + * shared IRQ. + */ + +static int pcmcia_init_one(struct pcmcia_device *pdev) +{ + struct ata_probe_ent ae; + struct ata_pcmcia_info *info; + tuple_t tuple; + struct { + unsigned short buf[128]; + cisparse_t parse; + config_info_t conf; + cistpl_cftable_entry_t dflt; + } *stk = NULL; + cistpl_cftable_entry_t *cfg; + int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM; + unsigned long io_base, ctl_base; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (info == NULL) + return -ENOMEM; + + /* Glue stuff together. FIXME: We may be able to get rid of info with care */ + info->pdev = pdev; + pdev->priv = info; + + /* Set up attributes in order to probe card and get resources */ + pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + pdev->io.IOAddrLines = 3; + pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; + pdev->irq.IRQInfo1 = IRQ_LEVEL_ID; + pdev->conf.Attributes = CONF_ENABLE_IRQ; + pdev->conf.IntType = INT_MEMORY_AND_IO; + + /* Allocate resoure probing structures */ + + stk = kzalloc(sizeof(*stk), GFP_KERNEL); + if (!stk) + goto out1; + + cfg = &stk->parse.cftable_entry; + + /* Tuples we are walking */ + tuple.TupleData = (cisdata_t *)&stk->buf; + tuple.TupleOffset = 0; + tuple.TupleDataMax = 255; + tuple.Attributes = 0; + tuple.DesiredTuple = CISTPL_CONFIG; + + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(pdev, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(pdev, &tuple, &stk->parse)); + pdev->conf.ConfigBase = stk->parse.config.base; + pdev->conf.Present = stk->parse.config.rmask[0]; + + /* See if we have a manufacturer identifier. Use it to set is_kme for + vendor quirks */ + tuple.DesiredTuple = CISTPL_MANFID; + if (!pcmcia_get_first_tuple(pdev, &tuple) && !pcmcia_get_tuple_data(pdev, &tuple) && !pcmcia_parse_tuple(pdev, &tuple, &stk->parse)) + is_kme = ((stk->parse.manfid.manf == MANFID_KME) && ((stk->parse.manfid.card == PRODID_KME_KXLC005_A) || (stk->parse.manfid.card == PRODID_KME_KXLC005_B))); + + /* Not sure if this is right... look up the current Vcc */ + CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf)); +/* link->conf.Vcc = stk->conf.Vcc; */ + + pass = io_base = ctl_base = 0; + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + tuple.Attributes = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); + + /* Now munch the resources looking for a suitable set */ + while (1) { + if (pcmcia_get_tuple_data(pdev, &tuple) != 0) + goto next_entry; + if (pcmcia_parse_tuple(pdev, &tuple, &stk->parse) != 0) + goto next_entry; + /* Check for matching Vcc, unless we're desperate */ + if (!pass) { + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) + goto next_entry; + } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; + + if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io; + pdev->conf.ConfigIndex = cfg->index; + pdev->io.BasePort1 = io->win[0].base; + pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (!(io->flags & CISTPL_IO_16BIT)) + pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + if (io->nwin == 2) { + pdev->io.NumPorts1 = 8; + pdev->io.BasePort2 = io->win[1].base; + pdev->io.NumPorts2 = (is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + goto next_entry; + io_base = pdev->io.BasePort1; + ctl_base = pdev->io.BasePort2; + } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { + pdev->io.NumPorts1 = io->win[0].len; + pdev->io.NumPorts2 = 0; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + goto next_entry; + io_base = pdev->io.BasePort1; + ctl_base = pdev->io.BasePort1 + 0x0e; + } else goto next_entry; + /* If we've got this far, we're done */ + break; + } +next_entry: + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + memcpy(&stk->dflt, cfg, sizeof(stk->dflt)); + if (pass) { + CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple)); + } else if (pcmcia_get_next_tuple(pdev, &tuple) != 0) { + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); + memset(&stk->dflt, 0, sizeof(stk->dflt)); + pass++; + } + } + + CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq)); + CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf)); + + /* Success. Disable the IRQ nIEN line, do quirks */ + outb(0x02, ctl_base); + if (is_kme) + outb(0x81, ctl_base + 0x01); + + /* FIXME: Could be more ports at base + 0x10 but we only deal with + one right now */ + if (pdev->io.NumPorts1 >= 0x20) + printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n"); + + /* + * Having done the PCMCIA plumbing the ATA side is relatively + * sane. + */ + + memset(&ae, 0, sizeof(struct ata_probe_ent)); + INIT_LIST_HEAD(&ae.node); + ae.dev = &pdev->dev; + ae.port_ops = &pcmcia_port_ops; + ae.sht = &pcmcia_sht; + ae.n_ports = 1; + ae.pio_mask = 1; /* ISA so PIO 0 cycles */ + ae.irq = pdev->irq.AssignedIRQ; + ae.irq_flags = SA_SHIRQ; + ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; + ae.port[0].cmd_addr = io_base; + ae.port[0].altstatus_addr = ctl_base; + ae.port[0].ctl_addr = ctl_base; + ata_std_ports(&ae.port[0]); + + if (ata_device_add(&ae) == 0) + goto failed; + + info->ndev = 1; + kfree(stk); + return 0; + +cs_failed: + cs_error(pdev, last_fn, last_ret); +failed: + kfree(stk); + info->ndev = 0; + pcmcia_disable_device(pdev); +out1: + kfree(info); + return ret; +} + +/** + * pcmcia_remove_one - unplug an pcmcia interface + * @pdev: pcmcia device + * + * A PCMCIA ATA device has been unplugged. Perform the needed + * cleanup. Also called on module unload for any active devices. + */ + +static void pcmcia_remove_one(struct pcmcia_device *pdev) +{ + struct ata_pcmcia_info *info = pdev->priv; + struct device *dev = &pdev->dev; + + if (info != NULL) { + /* If we have attached the device to the ATA layer, detach it */ + if (info->ndev) { + struct ata_host *host = dev_get_drvdata(dev); + ata_host_remove(host); + dev_set_drvdata(dev, NULL); + } + info->ndev = 0; + pdev->priv = NULL; + } + pcmcia_disable_device(pdev); + kfree(info); +} + +static struct pcmcia_device_id pcmcia_devices[] = { + PCMCIA_DEVICE_FUNC_ID(4), + PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */ + PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), + PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), + PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ + PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), + PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ + PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */ + PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001), + PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar */ + PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0), + PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74), + PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9), + PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4), + PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde), + PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf), + PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e), + PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae), + PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178), + PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), + PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), + PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), + PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), + PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), + PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), + PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), + PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1), + PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883), + PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d), + PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), + PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), + PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), + PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), + PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices); + +static struct pcmcia_driver pcmcia_driver = { + .owner = THIS_MODULE, + .drv = { + .name = DRV_NAME, + }, + .id_table = pcmcia_devices, + .probe = pcmcia_init_one, + .remove = pcmcia_remove_one, +}; + +static int __init pcmcia_init(void) +{ + return pcmcia_register_driver(&pcmcia_driver); +} + +static void __exit pcmcia_exit(void) +{ + pcmcia_unregister_driver(&pcmcia_driver); +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for PCMCIA ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(pcmcia_init); +module_exit(pcmcia_exit); diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c new file mode 100644 index 0000000..56b8c1e --- /dev/null +++ b/drivers/ata/pata_pdc2027x.c @@ -0,0 +1,869 @@ +/* + * Promise PATA TX2/TX4/TX2000/133 IDE driver for pdc20268 to pdc20277. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Ported to libata by: + * Albert Lee <albertcc@tw.ibm.com> IBM Corporation + * + * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> + * Portions Copyright (C) 1999 Promise Technology, Inc. + * + * Author: Frank Tiernan (frankt@promise.com) + * Released under terms of General Public License + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware information only available under NDA. + * + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_cmnd.h> +#include <linux/libata.h> +#include <asm/io.h> + +#define DRV_NAME "pata_pdc2027x" +#define DRV_VERSION "0.74-ac3" +#undef PDC_DEBUG + +#ifdef PDC_DEBUG +#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) +#else +#define PDPRINTK(fmt, args...) +#endif + +enum { + PDC_UDMA_100 = 0, + PDC_UDMA_133 = 1, + + PDC_100_MHZ = 100000000, + PDC_133_MHZ = 133333333, + + PDC_SYS_CTL = 0x1100, + PDC_ATA_CTL = 0x1104, + PDC_GLOBAL_CTL = 0x1108, + PDC_CTCR0 = 0x110C, + PDC_CTCR1 = 0x1110, + PDC_BYTE_COUNT = 0x1120, + PDC_PLL_CTL = 0x1202, +}; + +static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static void pdc2027x_remove_one(struct pci_dev *pdev); +static void pdc2027x_error_handler(struct ata_port *ap); +static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev); +static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev); +static void pdc2027x_post_set_mode(struct ata_port *ap); +static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc); + +/* + * ATA Timing Tables based on 133MHz controller clock. + * These tables are only used when the controller is in 133MHz clock. + * If the controller is in 100MHz clock, the ASIC hardware will + * set the timing registers automatically when "set feature" command + * is issued to the device. However, if the controller clock is 133MHz, + * the following tables must be used. + */ +static struct pdc2027x_pio_timing { + u8 value0, value1, value2; +} pdc2027x_pio_timing_tbl [] = { + { 0xfb, 0x2b, 0xac }, /* PIO mode 0 */ + { 0x46, 0x29, 0xa4 }, /* PIO mode 1 */ + { 0x23, 0x26, 0x64 }, /* PIO mode 2 */ + { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */ + { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ +}; + +static struct pdc2027x_mdma_timing { + u8 value0, value1; +} pdc2027x_mdma_timing_tbl [] = { + { 0xdf, 0x5f }, /* MDMA mode 0 */ + { 0x6b, 0x27 }, /* MDMA mode 1 */ + { 0x69, 0x25 }, /* MDMA mode 2 */ +}; + +static struct pdc2027x_udma_timing { + u8 value0, value1, value2; +} pdc2027x_udma_timing_tbl [] = { + { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ + { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */ + { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */ + { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */ + { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */ + { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */ + { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ +}; + +static const struct pci_device_id pdc2027x_pci_tbl[] = { + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20268, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_100 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20269, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_133 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20270, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_100 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20271, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_133 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20275, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_133 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20276, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_133 }, + { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20277, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PDC_UDMA_133 }, + { } /* terminate list */ +}; + +static struct pci_driver pdc2027x_pci_driver = { + .name = DRV_NAME, + .id_table = pdc2027x_pci_tbl, + .probe = pdc2027x_init_one, + .remove = __devexit_p(pdc2027x_remove_one), +}; + +static struct scsi_host_template pdc2027x_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations pdc2027x_pata100_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .check_atapi_dma = pdc2027x_check_atapi_dma, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = pdc2027x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static struct ata_port_operations pdc2027x_pata133_ops = { + .port_disable = ata_port_disable, + .set_piomode = pdc2027x_set_piomode, + .set_dmamode = pdc2027x_set_dmamode, + .post_set_mode = pdc2027x_post_set_mode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .check_atapi_dma = pdc2027x_check_atapi_dma, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = pdc2027x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static struct ata_port_info pdc2027x_port_info[] = { + /* PDC_UDMA_100 */ + { + .sht = &pdc2027x_sht, + .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | + ATA_FLAG_MMIO, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA5, /* udma0-5 */ + .port_ops = &pdc2027x_pata100_ops, + }, + /* PDC_UDMA_133 */ + { + .sht = &pdc2027x_sht, + .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | + ATA_FLAG_MMIO, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA6, /* udma0-6 */ + .port_ops = &pdc2027x_pata133_ops, + }, +}; + +MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Albert Lee"); +MODULE_DESCRIPTION("libata driver module for Promise PDC20268 to PDC20277"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, pdc2027x_pci_tbl); + +/** + * port_mmio - Get the MMIO address of PDC2027x extended registers + * @ap: Port + * @offset: offset from mmio base + */ +static inline void* port_mmio(struct ata_port *ap, unsigned int offset) +{ + return ap->host->mmio_base + ap->port_no * 0x100 + offset; +} + +/** + * dev_mmio - Get the MMIO address of PDC2027x extended registers + * @ap: Port + * @adev: device + * @offset: offset from mmio base + */ +static inline void* dev_mmio(struct ata_port *ap, struct ata_device *adev, unsigned int offset) +{ + u8 adj = (adev->devno) ? 0x08 : 0x00; + return port_mmio(ap, offset) + adj; +} + +/** + * pdc2027x_pata_cbl_detect - Probe host controller cable detect info + * @ap: Port for which cable detect info is desired + * + * Read 80c cable indicator from Promise extended register. + * This register is latched when the system is reset. + * + * LOCKING: + * None (inherited from caller). + */ +static void pdc2027x_cbl_detect(struct ata_port *ap) +{ + u32 cgcr; + + /* check cable detect results */ + cgcr = readl(port_mmio(ap, PDC_GLOBAL_CTL)); + if (cgcr & (1 << 26)) + goto cbl40; + + PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no); + + ap->cbl = ATA_CBL_PATA80; + return; + +cbl40: + printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no); + ap->cbl = ATA_CBL_PATA40; + ap->udma_mask &= ATA_UDMA_MASK_40C; +} + +/** + * pdc2027x_port_enabled - Check PDC ATA control register to see whether the port is enabled. + * @ap: Port to check + */ +static inline int pdc2027x_port_enabled(struct ata_port *ap) +{ + return readb(port_mmio(ap, PDC_ATA_CTL)) & 0x02; +} + +/** + * pdc2027x_prereset - prereset for PATA host controller + * @ap: Target port + * + * Probeinit including cable detection. + * + * LOCKING: + * None (inherited from caller). + */ + +static int pdc2027x_prereset(struct ata_port *ap) +{ + /* Check whether port enabled */ + if (!pdc2027x_port_enabled(ap)) { + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + pdc2027x_cbl_detect(ap); + return ata_std_prereset(ap); +} + +/** + * pdc2027x_error_handler - Perform reset on PATA port and classify + * @ap: Port to reset + * + * Reset PATA phy and classify attached devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void pdc2027x_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, pdc2027x_prereset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * pdc2027x_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port to configure + * @adev: um + * @pio: PIO mode, 0 - 4 + * + * Set PIO mode for device. + * + * LOCKING: + * None (inherited from caller). + */ + +static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + u32 ctcr0, ctcr1; + + PDPRINTK("adev->pio_mode[%X]\n", adev->pio_mode); + + /* Sanity check */ + if (pio > 4) { + printk(KERN_ERR DRV_NAME ": Unknown pio mode [%d] ignored\n", pio); + return; + + } + + /* Set the PIO timing registers using value table for 133MHz */ + PDPRINTK("Set pio regs... \n"); + + ctcr0 = readl(dev_mmio(ap, adev, PDC_CTCR0)); + ctcr0 &= 0xffff0000; + ctcr0 |= pdc2027x_pio_timing_tbl[pio].value0 | + (pdc2027x_pio_timing_tbl[pio].value1 << 8); + writel(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); + + ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1)); + ctcr1 &= 0x00ffffff; + ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24); + writel(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); + + PDPRINTK("Set pio regs done\n"); + + PDPRINTK("Set to pio mode[%u] \n", pio); +} + +/** + * pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings + * @ap: Port to configure + * @adev: um + * @udma: udma mode, XFER_UDMA_0 to XFER_UDMA_6 + * + * Set UDMA mode for device. + * + * LOCKING: + * None (inherited from caller). + */ +static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int dma_mode = adev->dma_mode; + u32 ctcr0, ctcr1; + + if ((dma_mode >= XFER_UDMA_0) && + (dma_mode <= XFER_UDMA_6)) { + /* Set the UDMA timing registers with value table for 133MHz */ + unsigned int udma_mode = dma_mode & 0x07; + + if (dma_mode == XFER_UDMA_2) { + /* + * Turn off tHOLD. + * If tHOLD is '1', the hardware will add half clock for data hold time. + * This code segment seems to be no effect. tHOLD will be overwritten below. + */ + ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1)); + writel(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1)); + } + + PDPRINTK("Set udma regs... \n"); + + ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1)); + ctcr1 &= 0xff000000; + ctcr1 |= pdc2027x_udma_timing_tbl[udma_mode].value0 | + (pdc2027x_udma_timing_tbl[udma_mode].value1 << 8) | + (pdc2027x_udma_timing_tbl[udma_mode].value2 << 16); + writel(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); + + PDPRINTK("Set udma regs done\n"); + + PDPRINTK("Set to udma mode[%u] \n", udma_mode); + + } else if ((dma_mode >= XFER_MW_DMA_0) && + (dma_mode <= XFER_MW_DMA_2)) { + /* Set the MDMA timing registers with value table for 133MHz */ + unsigned int mdma_mode = dma_mode & 0x07; + + PDPRINTK("Set mdma regs... \n"); + ctcr0 = readl(dev_mmio(ap, adev, PDC_CTCR0)); + + ctcr0 &= 0x0000ffff; + ctcr0 |= (pdc2027x_mdma_timing_tbl[mdma_mode].value0 << 16) | + (pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24); + + writel(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); + PDPRINTK("Set mdma regs done\n"); + + PDPRINTK("Set to mdma mode[%u] \n", mdma_mode); + } else { + printk(KERN_ERR DRV_NAME ": Unknown dma mode [%u] ignored\n", dma_mode); + } +} + +/** + * pdc2027x_post_set_mode - Set the timing registers back to correct values. + * @ap: Port to configure + * + * The pdc2027x hardware will look at "SET FEATURES" and change the timing registers + * automatically. The values set by the hardware might be incorrect, under 133Mhz PLL. + * This function overwrites the possibly incorrect values set by the hardware to be correct. + */ +static void pdc2027x_post_set_mode(struct ata_port *ap) +{ + int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + + if (ata_dev_enabled(dev)) { + + pdc2027x_set_piomode(ap, dev); + + /* + * Enable prefetch if the device support PIO only. + */ + if (dev->xfer_shift == ATA_SHIFT_PIO) { + u32 ctcr1 = readl(dev_mmio(ap, dev, PDC_CTCR1)); + ctcr1 |= (1 << 25); + writel(ctcr1, dev_mmio(ap, dev, PDC_CTCR1)); + + PDPRINTK("Turn on prefetch\n"); + } else { + pdc2027x_set_dmamode(ap, dev); + } + } + } +} + +/** + * pdc2027x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command + * @qc: Metadata associated with taskfile to check + * + * LOCKING: + * None (inherited from caller). + * + * RETURNS: 0 when ATAPI DMA can be used + * 1 otherwise + */ +static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + u8 *scsicmd = cmd->cmnd; + int rc = 1; /* atapi dma off by default */ + + /* + * This workaround is from Promise's GPL driver. + * If ATAPI DMA is used for commands not in the + * following white list, say MODE_SENSE and REQUEST_SENSE, + * pdc2027x might hit the irq lost problem. + */ + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + case READ_12: + case WRITE_12: + case READ_6: + case WRITE_6: + case 0xad: /* READ_DVD_STRUCTURE */ + case 0xbe: /* READ_CD */ + /* ATAPI DMA is ok */ + rc = 0; + break; + default: + ; + } + + return rc; +} + +/** + * pdc_read_counter - Read the ctr counter + * @probe_ent: for the port address + */ + +static long pdc_read_counter(struct ata_probe_ent *probe_ent) +{ + long counter; + int retry = 1; + u32 bccrl, bccrh, bccrlv, bccrhv; + +retry: + bccrl = readl(probe_ent->mmio_base + PDC_BYTE_COUNT) & 0xffff; + bccrh = readl(probe_ent->mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; + rmb(); + + /* Read the counter values again for verification */ + bccrlv = readl(probe_ent->mmio_base + PDC_BYTE_COUNT) & 0xffff; + bccrhv = readl(probe_ent->mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; + rmb(); + + counter = (bccrh << 15) | bccrl; + + PDPRINTK("bccrh [%X] bccrl [%X]\n", bccrh, bccrl); + PDPRINTK("bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv); + + /* + * The 30-bit decreasing counter are read by 2 pieces. + * Incorrect value may be read when both bccrh and bccrl are changing. + * Ex. When 7900 decrease to 78FF, wrong value 7800 might be read. + */ + if (retry && !(bccrh == bccrhv && bccrl >= bccrlv)) { + retry--; + PDPRINTK("rereading counter\n"); + goto retry; + } + + return counter; +} + +/** + * adjust_pll - Adjust the PLL input clock in Hz. + * + * @pdc_controller: controller specific information + * @probe_ent: For the port address + * @pll_clock: The input of PLL in HZ + */ +static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsigned int board_idx) +{ + + u16 pll_ctl; + long pll_clock_khz = pll_clock / 1000; + long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ; + long ratio = pout_required / pll_clock_khz; + int F, R; + + /* Sanity check */ + if (unlikely(pll_clock_khz < 5000L || pll_clock_khz > 70000L)) { + printk(KERN_ERR DRV_NAME ": Invalid PLL input clock %ldkHz, give up!\n", pll_clock_khz); + return; + } + +#ifdef PDC_DEBUG + PDPRINTK("pout_required is %ld\n", pout_required); + + /* Show the current clock value of PLL control register + * (maybe already configured by the firmware) + */ + pll_ctl = readw(probe_ent->mmio_base + PDC_PLL_CTL); + + PDPRINTK("pll_ctl[%X]\n", pll_ctl); +#endif + + /* + * Calculate the ratio of F, R and OD + * POUT = (F + 2) / (( R + 2) * NO) + */ + if (ratio < 8600L) { /* 8.6x */ + /* Using NO = 0x01, R = 0x0D */ + R = 0x0d; + } else if (ratio < 12900L) { /* 12.9x */ + /* Using NO = 0x01, R = 0x08 */ + R = 0x08; + } else if (ratio < 16100L) { /* 16.1x */ + /* Using NO = 0x01, R = 0x06 */ + R = 0x06; + } else if (ratio < 64000L) { /* 64x */ + R = 0x00; + } else { + /* Invalid ratio */ + printk(KERN_ERR DRV_NAME ": Invalid ratio %ld, give up!\n", ratio); + return; + } + + F = (ratio * (R+2)) / 1000 - 2; + + if (unlikely(F < 0 || F > 127)) { + /* Invalid F */ + printk(KERN_ERR DRV_NAME ": F[%d] invalid!\n", F); + return; + } + + PDPRINTK("F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio); + + pll_ctl = (R << 8) | F; + + PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl); + + writew(pll_ctl, probe_ent->mmio_base + PDC_PLL_CTL); + readw(probe_ent->mmio_base + PDC_PLL_CTL); /* flush */ + + /* Wait the PLL circuit to be stable */ + mdelay(30); + +#ifdef PDC_DEBUG + /* + * Show the current clock value of PLL control register + * (maybe configured by the firmware) + */ + pll_ctl = readw(probe_ent->mmio_base + PDC_PLL_CTL); + + PDPRINTK("pll_ctl[%X]\n", pll_ctl); +#endif + + return; +} + +/** + * detect_pll_input_clock - Detect the PLL input clock in Hz. + * @probe_ent: for the port address + * Ex. 16949000 on 33MHz PCI bus for pdc20275. + * Half of the PCI clock. + */ +static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent) +{ + u32 scr; + long start_count, end_count; + long pll_clock; + + /* Read current counter value */ + start_count = pdc_read_counter(probe_ent); + + /* Start the test mode */ + scr = readl(probe_ent->mmio_base + PDC_SYS_CTL); + PDPRINTK("scr[%X]\n", scr); + writel(scr | (0x01 << 14), probe_ent->mmio_base + PDC_SYS_CTL); + readl(probe_ent->mmio_base + PDC_SYS_CTL); /* flush */ + + /* Let the counter run for 100 ms. */ + mdelay(100); + + /* Read the counter values again */ + end_count = pdc_read_counter(probe_ent); + + /* Stop the test mode */ + scr = readl(probe_ent->mmio_base + PDC_SYS_CTL); + PDPRINTK("scr[%X]\n", scr); + writel(scr & ~(0x01 << 14), probe_ent->mmio_base + PDC_SYS_CTL); + readl(probe_ent->mmio_base + PDC_SYS_CTL); /* flush */ + + /* calculate the input clock in Hz */ + pll_clock = (start_count - end_count) * 10; + + PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count); + PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock); + + return pll_clock; +} + +/** + * pdc_hardware_init - Initialize the hardware. + * @pdev: instance of pci_dev found + * @pdc_controller: controller specific information + * @pe: for the port address + */ +static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, unsigned int board_idx) +{ + long pll_clock; + + /* + * Detect PLL input clock rate. + * On some system, where PCI bus is running at non-standard clock rate. + * Ex. 25MHz or 40MHz, we have to adjust the cycle_time. + * The pdc20275 controller employs PLL circuit to help correct timing registers setting. + */ + pll_clock = pdc_detect_pll_input_clock(pe); + + if (pll_clock < 0) /* counter overflow? Try again. */ + pll_clock = pdc_detect_pll_input_clock(pe); + + dev_printk(KERN_INFO, &pdev->dev, "PLL input clock %ld kHz\n", pll_clock/1000); + + /* Adjust PLL control register */ + pdc_adjust_pll(pe, pll_clock, board_idx); + + return 0; +} + +/** + * pdc_ata_setup_port - setup the mmio address + * @port: ata ioports to setup + * @base: base address + */ +static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = + port->data_addr = base; + port->feature_addr = + port->error_addr = base + 0x05; + port->nsect_addr = base + 0x0a; + port->lbal_addr = base + 0x0f; + port->lbam_addr = base + 0x10; + port->lbah_addr = base + 0x15; + port->device_addr = base + 0x1a; + port->command_addr = + port->status_addr = base + 0x1f; + port->altstatus_addr = + port->ctl_addr = base + 0x81a; +} + +/** + * pdc2027x_init_one - PCI probe function + * Called when an instance of PCI adapter is inserted. + * This function checks whether the hardware is supported, + * initialize hardware and register an instance of ata_host to + * libata by providing struct ata_probe_ent and ata_device_add(). + * (implements struct pci_driver.probe() ) + * + * @pdev: instance of pci_dev found + * @ent: matching entry in the id_tbl[] + */ +static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + unsigned int board_idx = (unsigned int) ent->driver_data; + + struct ata_probe_ent *probe_ent = NULL; + unsigned long base; + void *mmio_base; + int rc; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto err_out; + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + /* Prepare the probe entry */ + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + mmio_base = pci_iomap(pdev, 5, 0); + if (!mmio_base) { + rc = -ENOMEM; + goto err_out_free_ent; + } + + base = (unsigned long) mmio_base; + + probe_ent->sht = pdc2027x_port_info[board_idx].sht; + probe_ent->port_flags = pdc2027x_port_info[board_idx].flags; + probe_ent->pio_mask = pdc2027x_port_info[board_idx].pio_mask; + probe_ent->mwdma_mask = pdc2027x_port_info[board_idx].mwdma_mask; + probe_ent->udma_mask = pdc2027x_port_info[board_idx].udma_mask; + probe_ent->port_ops = pdc2027x_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = mmio_base; + + pdc_ata_setup_port(&probe_ent->port[0], base + 0x17c0); + probe_ent->port[0].bmdma_addr = base + 0x1000; + pdc_ata_setup_port(&probe_ent->port[1], base + 0x15c0); + probe_ent->port[1].bmdma_addr = base + 0x1008; + + probe_ent->n_ports = 2; + + pci_set_master(pdev); + //pci_enable_intx(pdev); + + /* initialize adapter */ + if (pdc_hardware_init(pdev, probe_ent, board_idx) != 0) + goto err_out_free_ent; + + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + pci_disable_device(pdev); + return rc; +} + +/** + * pdc2027x_remove_one - Called to remove a single instance of the + * adapter. + * + * @dev: The PCI device to remove. + * FIXME: module load/unload not working yet + */ +static void __devexit pdc2027x_remove_one(struct pci_dev *pdev) +{ + ata_pci_remove_one(pdev); +} + +/** + * pdc2027x_init - Called after this module is loaded into the kernel. + */ +static int __init pdc2027x_init(void) +{ + return pci_module_init(&pdc2027x_pci_driver); +} + +/** + * pdc2027x_exit - Called before this module unloaded from the kernel + */ +static void __exit pdc2027x_exit(void) +{ + pci_unregister_driver(&pdc2027x_pci_driver); +} + +module_init(pdc2027x_init); +module_exit(pdc2027x_exit); diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c new file mode 100644 index 0000000..48f4343 --- /dev/null +++ b/drivers/ata/pata_pdc202xx_old.c @@ -0,0 +1,423 @@ +/* + * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * Based in part on linux/drivers/ide/pci/pdc202xx_old.c + * + * First cut with LBA48/ATAPI + * + * TODO: + * Channel interlock/reset on both required ? + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_pdc202xx_old" +#define DRV_VERSION "0.2.1" + +/** + * pdc2024x_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int pdc2024x_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + +static void pdc2024x_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, pdc2024x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + + +static int pdc2026x_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 cis; + + pci_read_config_word(pdev, 0x50, &cis); + if (cis & (1 << (10 + ap->port_no))) + ap->cbl = ATA_CBL_PATA80; + else + ap->cbl = ATA_CBL_PATA40; + + return ata_std_prereset(ap); +} + +static void pdc2026x_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, pdc2026x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * pdc_configure_piomode - set chip PIO timing + * @ap: ATA interface + * @adev: ATA device + * @pio: PIO mode + * + * Called to do the PIO mode setup. Our timing registers are shared + * so a configure_dmamode call will undo any work we do here and vice + * versa + */ + +static void pdc_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x60 + 4 * ap->port_no + 2 * adev->devno; + static u16 pio_timing[5] = { + 0x0913, 0x050C , 0x0308, 0x0206, 0x0104 + }; + u8 r_ap, r_bp; + + pci_read_config_byte(pdev, port, &r_ap); + pci_read_config_byte(pdev, port + 1, &r_bp); + r_ap &= ~0x3F; /* Preserve ERRDY_EN, SYNC_IN */ + r_bp &= ~0x07; + r_ap |= (pio_timing[pio] >> 8); + r_bp |= (pio_timing[pio] & 0xFF); + + if (ata_pio_need_iordy(adev)) + r_ap |= 0x20; /* IORDY enable */ + if (adev->class == ATA_DEV_ATA) + r_ap |= 0x10; /* FIFO enable */ + pci_write_config_byte(pdev, port, r_ap); + pci_write_config_byte(pdev, port + 1, r_bp); +} + +/** + * pdc_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Our timing registers are shared + * but we want to set the PIO timing by default. + */ + +static void pdc_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + pdc_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * pdc_configure_dmamode - set DMA mode in chip + * @ap: ATA interface + * @adev: ATA device + * + * Load DMA cycle times into the chip ready for a DMA transfer + * to occur. + */ + +static void pdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x60 + 4 * ap->port_no + 2 * adev->devno; + static u8 udma_timing[6][2] = { + { 0x60, 0x03 }, /* 33 Mhz Clock */ + { 0x40, 0x02 }, + { 0x20, 0x01 }, + { 0x40, 0x02 }, /* 66 Mhz Clock */ + { 0x20, 0x01 }, + { 0x20, 0x01 } + }; + u8 r_bp, r_cp; + + pci_read_config_byte(pdev, port + 1, &r_bp); + pci_read_config_byte(pdev, port + 2, &r_cp); + + r_bp &= ~0xF0; + r_cp &= ~0x0F; + + if (adev->dma_mode >= XFER_UDMA_0) { + int speed = adev->dma_mode - XFER_UDMA_0; + r_bp |= udma_timing[speed][0]; + r_cp |= udma_timing[speed][1]; + + } else { + int speed = adev->dma_mode - XFER_MW_DMA_0; + r_bp |= 0x60; + r_cp |= (5 - speed); + } + pci_write_config_byte(pdev, port + 1, r_bp); + pci_write_config_byte(pdev, port + 2, r_cp); + +} + +/** + * pdc2026x_bmdma_start - DMA engine begin + * @qc: ATA command + * + * In UDMA3 or higher we have to clock switch for the duration of the + * DMA transfer sequence. + */ + +static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_taskfile *tf = &qc->tf; + int sel66 = ap->port_no ? 0x08: 0x02; + + unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr; + unsigned long clock = master + 0x11; + unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no); + + u32 len; + + /* Check we keep host level locking here */ + if (adev->dma_mode >= XFER_UDMA_2) + outb(inb(clock) | sel66, clock); + else + outb(inb(clock) & ~sel66, clock); + + /* The DMA clocks may have been trashed by a reset. FIXME: make conditional + and move to qc_issue ? */ + pdc_set_dmamode(ap, qc->dev); + + /* Cases the state machine will not complete correctly without help */ + if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATA_PROT_ATAPI_DMA) + { + if (tf->flags & ATA_TFLAG_LBA48) + len = qc->nsect * 512; + else + len = qc->nbytes; + + if (tf->flags & ATA_TFLAG_WRITE) + len |= 0x06000000; + else + len |= 0x05000000; + + outl(len, atapi_reg); + } + + /* Activate DMA */ + ata_bmdma_start(qc); +} + +/** + * pdc2026x_bmdma_end - DMA engine stop + * @qc: ATA command + * + * After a DMA completes we need to put the clock back to 33MHz for + * PIO timings. + */ + +static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_taskfile *tf = &qc->tf; + + int sel66 = ap->port_no ? 0x08: 0x02; + /* The clock bits are in the same register for both channels */ + unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr; + unsigned long clock = master + 0x11; + unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no); + + /* Cases the state machine will not complete correctly */ + if (tf->protocol == ATA_PROT_ATAPI_DMA || ( tf->flags & ATA_TFLAG_LBA48)) { + outl(0, atapi_reg); + outb(inb(clock) & ~sel66, clock); + } + /* Check we keep host level locking here */ + /* Flip back to 33Mhz for PIO */ + if (adev->dma_mode >= XFER_UDMA_2) + outb(inb(clock) & ~sel66, clock); + + ata_bmdma_stop(qc); +} + +/** + * pdc2026x_dev_config - device setup hook + * @ap: ATA port + * @adev: newly found device + * + * Perform chip specific early setup. We need to lock the transfer + * sizes to 8bit to avoid making the state engine on the 2026x cards + * barf. + */ + +static void pdc2026x_dev_config(struct ata_port *ap, struct ata_device *adev) +{ + adev->max_sectors = 256; +} + +static struct scsi_host_template pdc_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations pdc2024x_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = pdc_set_piomode, + .set_dmamode = pdc_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = pdc2024x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations pdc2026x_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = pdc_set_piomode, + .set_dmamode = pdc_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .dev_config = pdc2026x_dev_config, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = pdc2026x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = pdc2026x_bmdma_start, + .bmdma_stop = pdc2026x_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int pdc_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info[3] = { + { + .sht = &pdc_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA2, + .port_ops = &pdc2024x_port_ops + }, + { + .sht = &pdc_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA4, + .port_ops = &pdc2026x_port_ops + }, + { + .sht = &pdc_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA5, + .port_ops = &pdc2026x_port_ops + } + + }; + static struct ata_port_info *port_info[2]; + + port_info[0] = port_info[1] = &info[id->driver_data]; + + if (dev->device == PCI_DEVICE_ID_PROMISE_20265) { + struct pci_dev *bridge = dev->bus->self; + /* Don't grab anything behind a Promise I2O RAID */ + if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) { + if( bridge->device == PCI_DEVICE_ID_INTEL_I960) + return -ENODEV; + if( bridge->device == PCI_DEVICE_ID_INTEL_I960RM) + return -ENODEV; + } + } + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id pdc[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0}, + { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1}, + { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1}, + { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2}, + { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2}, + { 0, }, +}; + +static struct pci_driver pdc_pci_driver = { + .name = DRV_NAME, + .id_table = pdc, + .probe = pdc_init_one, + .remove = ata_pci_remove_one +}; + +static int __init pdc_init(void) +{ + return pci_register_driver(&pdc_pci_driver); +} + + +static void __exit pdc_exit(void) +{ + pci_unregister_driver(&pdc_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Promise 2024x and 20262-20267"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pdc); +MODULE_VERSION(DRV_VERSION); + +module_init(pdc_init); +module_exit(pdc_exit); diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c new file mode 100644 index 0000000..35cfdf0a --- /dev/null +++ b/drivers/ata/pata_qdi.c @@ -0,0 +1,403 @@ +/* + * pata_qdi.c - QDI VLB ATA controllers + * (C) 2006 Red Hat <alan@redhat.com> + * + * This driver mostly exists as a proof of concept for non PCI devices under + * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly + * useful. + * + * Tuning code written from the documentation at + * http://www.ryston.cz/petr/vlb/qd6500.html + * http://www.ryston.cz/petr/vlb/qd6580.html + * + * Probe code based on drivers/ide/legacy/qd65xx.c + * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by + * Samuel Thibault <samuel.thibault@fnac.net> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/platform_device.h> + +#define DRV_NAME "pata_qdi" +#define DRV_VERSION "0.2.4" + +#define NR_HOST 4 /* Two 6580s */ + +struct qdi_data { + unsigned long timing; + u8 clock[2]; + u8 last; + int fast; + struct platform_device *platform_dev; + +}; + +static struct ata_host *qdi_host[NR_HOST]; +static struct qdi_data qdi_data[NR_HOST]; +static int nr_qdi_host; + +#ifdef MODULE +static int probe_qdi = 1; +#else +static int probe_qdi; +#endif + +static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct qdi_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; + + qdi->clock[adev->devno] = timing; + + outb(timing, qdi->timing); +} + +static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct qdi_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; + + qdi->clock[adev->devno] = timing; + + outb(timing, qdi->timing); + + /* Clear the FIFO */ + if (adev->class != ATA_DEV_ATA) + outb(0x5F, (qdi->timing & 0xFFF0) + 3); +} + +/** + * qdi_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. + */ + +static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct qdi_data *qdi = ap->host->private_data; + + if (qdi->clock[adev->devno] != qdi->last) { + if (adev->pio_mode) { + qdi->last = qdi->clock[adev->devno]; + outb(qdi->clock[adev->devno], qdi->timing); + } + } + return ata_qc_issue_prot(qc); +} + +static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + int slop = buflen & 3; + + if (ata_id_has_dword_io(adev->id)) { + if (write_data) + outsl(ap->ioaddr.data_addr, buf, buflen >> 2); + else + insl(ap->ioaddr.data_addr, buf, buflen >> 2); + + if (unlikely(slop)) { + u32 pad; + if (write_data) { + memcpy(&pad, buf + buflen - slop, slop); + outl(le32_to_cpu(pad), ap->ioaddr.data_addr); + } else { + pad = cpu_to_le16(inl(ap->ioaddr.data_addr)); + memcpy(buf + buflen - slop, &pad, slop); + } + } + } else + ata_pio_data_xfer(adev, buf, buflen, write_data); +} + +static struct scsi_host_template qdi_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations qdi6500_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = qdi6500_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = qdi_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = qdi_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations qdi6580_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = qdi6580_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = qdi_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = qdi_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * qdi_init_one - attach a qdi interface + * @type: Type to display + * @io: I/O port start + * @irq: interrupt line + * @fast: True if on a > 33Mhz VLB + * + * Register an ISA bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + */ + +static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast) +{ + struct ata_probe_ent ae; + struct platform_device *pdev; + int ret; + + unsigned long ctrl = io + 0x206; + + /* + * Fill in a probe structure first of all + */ + + pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0); + if (pdev == NULL) + return -ENOMEM; + + memset(&ae, 0, sizeof(struct ata_probe_ent)); + INIT_LIST_HEAD(&ae.node); + ae.dev = &pdev->dev; + + if (type == 6580) { + ae.port_ops = &qdi6580_port_ops; + ae.pio_mask = 0x1F; + } else { + ae.port_ops = &qdi6500_port_ops; + ae.pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */ + } + + ae.sht = &qdi_sht; + ae.n_ports = 1; + ae.irq = irq; + ae.irq_flags = 0; + ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; + ae.port[0].cmd_addr = io; + ae.port[0].altstatus_addr = ctrl; + ae.port[0].ctl_addr = ctrl; + ata_std_ports(&ae.port[0]); + + /* + * Hook in a private data structure per channel + */ + ae.private_data = &qdi_data[nr_qdi_host]; + + qdi_data[nr_qdi_host].timing = port; + qdi_data[nr_qdi_host].fast = fast; + qdi_data[nr_qdi_host].platform_dev = pdev; + + printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io); + ret = ata_device_add(&ae); + if (ret == 0) { + platform_device_unregister(pdev); + return -ENODEV; + } + + qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev); + return 0; +} + +/** + * qdi_init - attach qdi interfaces + * + * Attach qdi IDE interfaces by scanning the ports it may occupy. + */ + +static __init int qdi_init(void) +{ + unsigned long flags; + static const unsigned long qd_port[2] = { 0x30, 0xB0 }; + static const unsigned long ide_port[2] = { 0x170, 0x1F0 }; + static const int ide_irq[2] = { 14, 15 }; + + int ct = 0; + int i; + + if (probe_qdi == 0) + return -ENODEV; + + /* + * Check each possible QD65xx base address + */ + + for (i = 0; i < 2; i++) { + unsigned long port = qd_port[i]; + u8 r, res; + + + if (request_region(port, 2, "pata_qdi")) { + /* Check for a card */ + local_irq_save(flags); + r = inb_p(port); + outb_p(0x19, port); + res = inb_p(port); + outb_p(r, port); + local_irq_restore(flags); + + /* Fail */ + if (res == 0x19) + { + release_region(port, 2); + continue; + } + + /* Passes the presence test */ + r = inb_p(port + 1); /* Check port agrees with port set */ + if ((r & 2) >> 1 != i) { + release_region(port, 2); + continue; + } + + /* Check card type */ + if ((r & 0xF0) == 0xC0) { + /* QD6500: single channel */ + if (r & 8) { + /* Disabled ? */ + release_region(port, 2); + continue; + } + ct += qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04); + } + if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) { + /* QD6580: dual channel */ + if (!request_region(port + 2 , 2, "pata_qdi")) + { + release_region(port, 2); + continue; + } + res = inb(port + 3); + if (res & 1) { + /* Single channel mode */ + ct += qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04); + } else { + /* Dual channel mode */ + ct += qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04); + ct += qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04); + } + } + } + } + if (ct != 0) + return 0; + return -ENODEV; +} + +static __exit void qdi_exit(void) +{ + int i; + + for (i = 0; i < nr_qdi_host; i++) { + ata_host_remove(qdi_host[i]); + /* Free the control resource. The 6580 dual channel has the resources + * claimed as a pair of 2 byte resources so we need no special cases... + */ + release_region(qdi_data[i].timing, 2); + platform_device_unregister(qdi_data[i].platform_dev); + } +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for qdi ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(qdi_init); +module_exit(qdi_exit); + +module_param(probe_qdi, int, 0); + diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c new file mode 100644 index 0000000..277f841 --- /dev/null +++ b/drivers/ata/pata_radisys.c @@ -0,0 +1,335 @@ +/* + * pata_radisys.c - Intel PATA/SATA controllers + * + * (C) 2006 Red Hat <alan@redhat.com> + * + * Some parts based on ata_piix.c by Jeff Garzik and others. + * + * A PIIX relative, this device has a single ATA channel and no + * slave timings, SITRE or PPE. In that sense it is a close relative + * of the original PIIX. It does however support UDMA 33/66 per channel + * although no other modes/timings. Also lacking is 32bit I/O on the ATA + * port. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/ata.h> + +#define DRV_NAME "pata_radisys" +#define DRV_VERSION "0.4.1" + +/** + * radisys_probe_init - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int radisys_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + + +/** + * radisys_pata_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * @classes: + * + * LOCKING: + * None (inherited from caller). + */ + +static void radisys_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, radisys_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * radisys_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void radisys_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u16 idetm_data; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. Note that the early PIIX does not have the slave + * timing port at 0x44. The Radisys is a relative of the PIIX + * but not the same so be careful. + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, /* Check me */ + { 0, 0 }, + { 1, 1 }, + { 2, 2 }, + { 3, 3 }, }; + + if (pio > 0) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE IORDY */ + + pci_read_config_word(dev, 0x40, &idetm_data); + + /* Enable IE and TIME as appropriate. Clear the other + drive timing bits */ + idetm_data &= 0xCCCC; + idetm_data |= (control << (4 * adev->devno)); + idetm_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + pci_write_config_word(dev, 0x40, idetm_data); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * radisys_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * @isich: True if the device is an ICH and has IOCFG registers + * + * Set MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u16 idetm_data; + u8 udma_enable; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 1 }, + { 2, 2 }, + { 3, 3 }, }; + + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally. + */ + + pci_read_config_word(dev, 0x40, &idetm_data); + pci_read_config_byte(dev, 0x48, &udma_enable); + + if (adev->dma_mode < XFER_UDMA_0) { + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + int control = 3; /* IORDY|TIME0 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO0 for PIO cycles. */ + + if (adev->pio_mode < needed_pio[mwdma]) + control = 1; + + /* Mask out the relevant control and timing bits we will load. Also + clear the other drive TIME register as a precaution */ + + idetm_data &= 0xCCCC; + idetm_data |= control << (4 * adev->devno); + idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); + + udma_enable &= ~(1 << adev->devno); + } else { + u8 udma_mode; + + /* UDMA66 on: UDMA 33 and 66 are switchable via register 0x4A */ + + pci_read_config_byte(dev, 0x4A, &udma_mode); + + if (adev->xfer_mode == XFER_UDMA_2) + udma_mode &= ~ (1 << adev->devno); + else /* UDMA 4 */ + udma_mode |= (1 << adev->devno); + + pci_write_config_byte(dev, 0x4A, udma_mode); + + udma_enable |= (1 << adev->devno); + } + pci_write_config_word(dev, 0x40, idetm_data); + pci_write_config_byte(dev, 0x48, udma_enable); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * radisys_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * that, even if we get this wrong, cycles to the other device will + * be made PIO0. + */ + +static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + if (adev != ap->private_data) { + /* UDMA timing is not shared */ + if (adev->dma_mode < XFER_UDMA_0) { + if (adev->dma_mode) + radisys_set_dmamode(ap, adev); + else if (adev->pio_mode) + radisys_set_piomode(ap, adev); + } + } + return ata_qc_issue_prot(qc); +} + + +static struct scsi_host_template radisys_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations radisys_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = radisys_set_piomode, + .set_dmamode = radisys_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = radisys_pata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = radisys_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * radisys_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in radisys_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info info = { + .sht = &radisys_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma1-2 */ + .udma_mask = 0x14, /* UDMA33/66 only */ + .port_ops = &radisys_pata_ops, + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id radisys_pci_tbl[] = { + { 0x1331, 0x8201, PCI_ANY_ID, PCI_ANY_ID, }, + { } /* terminate list */ +}; + +static struct pci_driver radisys_pci_driver = { + .name = DRV_NAME, + .id_table = radisys_pci_tbl, + .probe = radisys_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init radisys_init(void) +{ + return pci_register_driver(&radisys_pci_driver); +} + +static void __exit radisys_exit(void) +{ + pci_unregister_driver(&radisys_pci_driver); +} + + +module_init(radisys_init); +module_exit(radisys_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Radisys R82600 controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, radisys_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c new file mode 100644 index 0000000..3c6d84f --- /dev/null +++ b/drivers/ata/pata_rz1000.c @@ -0,0 +1,205 @@ +/* + * RZ1000/1001 driver based upon + * + * linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003 + * Copyright (C) 1995-1998 Linus Torvalds & author (see below) + * Principal Author: mlord@pobox.com (Mark Lord) + * + * See linux/MAINTAINERS for address of current maintainer. + * + * This file provides support for disabling the buggy read-ahead + * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_rz1000" +#define DRV_VERSION "0.2.2" + + +/** + * rz1000_prereset - probe begin + * @ap: ATA port + * + * Set up cable type and use generics + */ + +static int rz1000_prereset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +/** + * rz1000_error_handler - probe reset + * @ap: ATA port + * + * Perform the ATA standard reset sequence + */ + +static void rz1000_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, rz1000_prereset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * rz1000_set_mode - mode setting function + * @ap: ATA interface + * + * Use a non standard set_mode function. We don't want to be tuned. We + * would prefer to be BIOS generic but for the fact our hardware is + * whacked out. + */ + +static void rz1000_set_mode(struct ata_port *ap) +{ + int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev)) { + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } +} + + +static struct scsi_host_template rz1000_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations rz1000_port_ops = { + .set_mode = rz1000_set_mode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = rz1000_error_handler, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = rz1000_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * rz1000_init_one - Register RZ1000 ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in rz1000_pci_tbl matching with @pdev + * + * Configure an RZ1000 interface. This doesn't require much special + * handling except that we *MUST* kill the chipset readahead or the + * user may experience data corruption. + */ + +static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_port_info *port_info[2]; + u16 reg; + static struct ata_port_info info = { + .sht = &rz1000_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &rz1000_port_ops + }; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + /* Be exceptionally paranoid as we must be sure to apply the fix */ + if (pci_read_config_word(pdev, 0x40, ®) != 0) + goto fail; + reg &= 0xDFFF; + if (pci_write_config_word(pdev, 0x40, reg) != 0) + goto fail; + printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n"); + + port_info[0] = &info; + port_info[1] = &info; + return ata_pci_init_one(pdev, port_info, 2); +fail: + printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n"); + /* Not safe to use so skip */ + return -ENODEV; +} + +static struct pci_device_id pata_rz1000[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), }, + { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), }, + { 0, }, +}; + +static struct pci_driver rz1000_pci_driver = { + .name = DRV_NAME, + .id_table = pata_rz1000, + .probe = rz1000_init_one, + .remove = ata_pci_remove_one +}; + + +static int __init rz1000_init(void) +{ + return pci_register_driver(&rz1000_pci_driver); +} + +static void __exit rz1000_exit(void) +{ + pci_unregister_driver(&rz1000_pci_driver); +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for RZ1000 PCI ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pata_rz1000); +MODULE_VERSION(DRV_VERSION); + +module_init(rz1000_init); +module_exit(rz1000_exit); + diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c new file mode 100644 index 0000000..4166c1a --- /dev/null +++ b/drivers/ata/pata_sc1200.c @@ -0,0 +1,287 @@ +/* + * New ATA layer SC1200 driver Alan Cox <alan@redhat.com> + * + * TODO: Mode selection filtering + * TODO: Can't enable second channel until ATA core has serialize + * TODO: Needs custom DMA cleanup code + * + * Based very heavily on + * + * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003 + * + * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com> + * May be copied or modified under the terms of the GNU General Public License + * + * Development of this chipset driver was funded + * by the nice folks at National Semiconductor. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "sc1200" +#define DRV_VERSION "0.2.3" + +#define SC1200_REV_A 0x00 +#define SC1200_REV_B1 0x01 +#define SC1200_REV_B3 0x02 +#define SC1200_REV_C1 0x03 +#define SC1200_REV_D1 0x04 + +/** + * sc1200_clock - PCI clock + * + * Return the PCI bus clocking for the SC1200 chipset configuration + * in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz + */ + +static int sc1200_clock(void) +{ + /* Magic registers that give us the chipset data */ + u8 chip_id = inb(0x903C); + u8 silicon_rev = inb(0x903D); + u16 pci_clock; + + if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1) + return 0; /* 33 MHz mode */ + + /* Clock generator configuration 0x901E its 8/9 are the PCI clocking + 0/3 is 33Mhz 1 is 48 2 is 66 */ + + pci_clock = inw(0x901E); + pci_clock >>= 8; + pci_clock &= 0x03; + if (pci_clock == 3) + pci_clock = 0; + return pci_clock; +} + +/** + * sc1200_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Set our PIO requirements. This is fairly simple on the SC1200 + */ + +static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u32 pio_timings[4][5] = { + {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz + {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz + {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz + {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131} // format1, 66Mhz + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 format; + unsigned int reg = 0x40 + 0x10 * ap->port_no; + int mode = adev->pio_mode - XFER_PIO_0; + + pci_read_config_dword(pdev, reg + 4, &format); + format >>= 31; + format += sc1200_clock(); + pci_write_config_dword(pdev, reg + 8 * adev->devno, + pio_timings[format][mode]); +} + +/** + * sc1200_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + * We cannot mix MWDMA and UDMA without reloading timings each switch + * master to slave. + */ + +static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u32 udma_timing[3][3] = { + { 0x00921250, 0x00911140, 0x00911030 }, + { 0x00932470, 0x00922260, 0x00922140 }, + { 0x009436A1, 0x00933481, 0x00923261 } + }; + + static const u32 mwdma_timing[3][3] = { + { 0x00077771, 0x00012121, 0x00002020 }, + { 0x000BBBB2, 0x00024241, 0x00013131 }, + { 0x000FFFF3, 0x00035352, 0x00015151 } + }; + + int clock = sc1200_clock(); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned int reg = 0x40 + 0x10 * ap->port_no; + int mode = adev->dma_mode; + u32 format; + + if (mode >= XFER_UDMA_0) + format = udma_timing[clock][mode - XFER_UDMA_0]; + else + format = mwdma_timing[clock][mode - XFER_MW_DMA_0]; + + if (adev->devno == 0) { + u32 timings; + + pci_read_config_dword(pdev, reg + 4, &timings); + timings &= 0x80000000UL; + timings |= format; + pci_write_config_dword(pdev, reg + 4, timings); + } else + pci_write_config_dword(pdev, reg + 12, format); +} + +/** + * sc1200_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. Specifically we have a problem that there is only + * one MWDMA/UDMA bit. + */ + +static unsigned int sc1200_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct ata_device *prev = ap->private_data; + + /* See if the DMA settings could be wrong */ + if (adev->dma_mode != 0 && adev != prev && prev != NULL) { + /* Maybe, but do the channels match MWDMA/UDMA ? */ + if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) || + (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0)) + /* Switch the mode bits */ + sc1200_set_dmamode(ap, adev); + } + + return ata_qc_issue_prot(qc); +} + +static struct scsi_host_template sc1200_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations sc1200_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = sc1200_set_piomode, + .set_dmamode = sc1200_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = sc1200_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * sc1200_init_one - Initialise an SC1200 + * @dev: PCI device + * @id: Entry in match table + * + * Just throw the needed data at the libata helper and it does all + * our work. + */ + +static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &sc1200_sht, + .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, + .port_ops = &sc1200_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + /* Can't enable port 2 yet, see top comments */ + return ata_pci_init_one(dev, port_info, 1); +} + +static struct pci_device_id sc1200[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_IDE), }, + { 0, }, +}; + +static struct pci_driver sc1200_pci_driver = { + .name = DRV_NAME, + .id_table = sc1200, + .probe = sc1200_init_one, + .remove = ata_pci_remove_one +}; + +static int __init sc1200_init(void) +{ + return pci_register_driver(&sc1200_pci_driver); +} + + +static void __exit sc1200_exit(void) +{ + pci_unregister_driver(&sc1200_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox, Mark Lord"); +MODULE_DESCRIPTION("low-level driver for the NS/AMD SC1200"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sc1200); +MODULE_VERSION(DRV_VERSION); + +module_init(sc1200_init); +module_exit(sc1200_exit); diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c new file mode 100644 index 0000000..af45611 --- /dev/null +++ b/drivers/ata/pata_serverworks.c @@ -0,0 +1,587 @@ +/* + * ata-serverworks.c - Serverworks PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * based upon + * + * serverworks.c + * + * Copyright (C) 1998-2000 Michel Aubry + * Copyright (C) 1998-2000 Andrzej Krzysztofowicz + * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> + * Portions copyright (c) 2001 Sun Microsystems + * + * + * RCC/ServerWorks IDE driver for Linux + * + * OSB4: `Open South Bridge' IDE Interface (fn 1) + * supports UDMA mode 2 (33 MB/s) + * + * CSB5: `Champion South Bridge' IDE Interface (fn 1) + * all revisions support UDMA mode 4 (66 MB/s) + * revision A2.0 and up support UDMA mode 5 (100 MB/s) + * + * *** The CSB5 does not provide ANY register *** + * *** to detect 80-conductor cable presence. *** + * + * CSB6: `Champion South Bridge' IDE Interface (optional: third channel) + * + * Documentation: + * Available under NDA only. Errata info very hard to get. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_serverworks" +#define DRV_VERSION "0.3.6" + +#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */ +#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */ + +/* Seagate Barracuda ATA IV Family drives in UDMA mode 5 + * can overrun their FIFOs when used with the CSB5 */ + +static const char *csb_bad_ata100[] = { + "ST320011A", + "ST340016A", + "ST360021A", + "ST380021A", + NULL +}; + +/** + * dell_cable - Dell serverworks cable detection + * @ap: ATA port to do cable detect + * + * Dell hide the 40/80 pin select for their interfaces in the top two + * bits of the subsystem ID. + */ + +static int dell_cable(struct ata_port *ap) { + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (pdev->subsystem_device & (1 << (ap->port_no + 14))) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; +} + +/** + * sun_cable - Sun Cobalt 'Alpine' cable detection + * @ap: ATA port to do cable select + * + * Cobalt CSB5 IDE hides the 40/80pin in the top two bits of the + * subsystem ID the same as dell. We could use one function but we may + * need to extend the Dell one in future + */ + +static int sun_cable(struct ata_port *ap) { + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (pdev->subsystem_device & (1 << (ap->port_no + 14))) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; +} + +/** + * osb4_cable - OSB4 cable detect + * @ap: ATA port to check + * + * The OSB4 isn't UDMA66 capable so this is easy + */ + +static int osb4_cable(struct ata_port *ap) { + return ATA_CBL_PATA40; +} + +/** + * csb4_cable - CSB5/6 cable detect + * @ap: ATA port to check + * + * Serverworks default arrangement is to use the drive side detection + * only. + */ + +static int csb_cable(struct ata_port *ap) { + return ATA_CBL_PATA80; +} + +struct sv_cable_table { + int device; + int subvendor; + int (*cable_detect)(struct ata_port *ap); +}; + +/* + * Note that we don't copy the old serverworks code because the old + * code contains obvious mistakes + */ + +static struct sv_cable_table cable_detect[] = { + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable }, + { PCI_DEVICE_ID_SERVERWORKS_OSB4, PCI_ANY_ID, osb4_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, csb_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, csb_cable }, + { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, csb_cable }, + { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, csb_cable }, + { } +}; + +/** + * serverworks_pre_reset - cable detection + * @ap: ATA port + * + * Perform cable detection according to the device and subvendor + * identifications + */ + +static int serverworks_pre_reset(struct ata_port *ap) { + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct sv_cable_table *cb = cable_detect; + + while(cb->device) { + if (cb->device == pdev->device && + (cb->subvendor == pdev->subsystem_vendor || + cb->subvendor == PCI_ANY_ID)) { + ap->cbl = cb->cable_detect(ap); + return ata_std_prereset(ap); + } + cb++; + } + + BUG(); + return -1; /* kill compiler warning */ +} + +static void serverworks_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, serverworks_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * serverworks_is_csb - Check for CSB or OSB + * @pdev: PCI device to check + * + * Returns true if the device being checked is known to be a CSB + * series device. + */ + +static u8 serverworks_is_csb(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE: + case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2: + case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE: + return 1; + default: + break; + } + return 0; +} + +/** + * serverworks_osb4_filter - mode selection filter + * @ap: ATA interface + * @adev: ATA device + * + * Filter the offered modes for the device to apply controller + * specific rules. OSB4 requires no UDMA for disks due to a FIFO + * bug we hit. + */ + +static unsigned long serverworks_osb4_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + if (adev->class == ATA_DEV_ATA) + mask &= ~ATA_MASK_UDMA; + return ata_pci_default_filter(ap, adev, mask); +} + + +/** + * serverworks_csb_filter - mode selection filter + * @ap: ATA interface + * @adev: ATA device + * + * Check the blacklist and disable UDMA5 if matched + */ + +static unsigned long serverworks_csb_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +{ + const char *p; + char model_num[40]; + int len, i; + + /* Disk, UDMA */ + if (adev->class != ATA_DEV_ATA) + return ata_pci_default_filter(ap, adev, mask); + + /* Actually do need to check */ + ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); + /* Precuationary - why not do this in the libata core ?? */ + + len = strlen(model_num); + while ((len > 0) && (model_num[len - 1] == ' ')) { + len--; + model_num[len] = 0; + } + + for(i = 0; (p = csb_bad_ata100[i]) != NULL; i++) { + if (!strncmp(p, model_num, len)) + mask &= ~(0x1F << ATA_SHIFT_UDMA); + } + return ata_pci_default_filter(ap, adev, mask); +} + + +/** + * serverworks_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the OSB4/CSB5 timing registers for PIO. The PIO register + * load is done as a simple lookup. + */ +static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; + int offset = 1 + (2 * ap->port_no) - adev->devno; + int devbits = (2 * ap->port_no + adev->devno) * 4; + u16 csb5_pio; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int pio = adev->pio_mode - XFER_PIO_0; + + pci_write_config_byte(pdev, 0x40 + offset, pio_mode[pio]); + + /* The OSB4 just requires the timing but the CSB series want the + mode number as well */ + if (serverworks_is_csb(pdev)) { + pci_read_config_word(pdev, 0x4A, &csb5_pio); + csb5_pio &= ~(0x0F << devbits); + pci_write_config_byte(pdev, 0x4A, csb5_pio | (pio << devbits)); + } +} + +/** + * serverworks_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the serverworks OSB4/CSB5 + * chipset. The MWDMA mode values are pulled from a lookup table + * while the chipset uses mode number for UDMA. + */ + +static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 dma_mode[] = { 0x77, 0x21, 0x20 }; + int offset = 1 + 2 * ap->port_no - adev->devno; + int devbits = (2 * ap->port_no + adev->devno); + u8 ultra; + u8 ultra_cfg; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_byte(pdev, 0x54, &ultra_cfg); + + if (adev->dma_mode >= XFER_UDMA_0) { + pci_write_config_byte(pdev, 0x44 + offset, 0x20); + + pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra); + ultra &= ~(0x0F << (ap->port_no * 4)); + ultra |= (adev->dma_mode - XFER_UDMA_0) + << (ap->port_no * 4); + pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra); + + ultra_cfg |= (1 << devbits); + } else { + pci_write_config_byte(pdev, 0x44 + offset, + dma_mode[adev->dma_mode - XFER_MW_DMA_0]); + ultra_cfg &= ~(1 << devbits); + } + pci_write_config_byte(pdev, 0x54, ultra_cfg); +} + +static struct scsi_host_template serverworks_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations serverworks_osb4_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = serverworks_set_piomode, + .set_dmamode = serverworks_set_dmamode, + .mode_filter = serverworks_osb4_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = serverworks_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations serverworks_csb_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = serverworks_set_piomode, + .set_dmamode = serverworks_set_dmamode, + .mode_filter = serverworks_csb_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = serverworks_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int serverworks_fixup_osb4(struct pci_dev *pdev) +{ + u32 reg; + struct pci_dev *isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); + if (isa_dev) { + pci_read_config_dword(isa_dev, 0x64, ®); + reg &= ~0x00002000; /* disable 600ns interrupt mask */ + if (!(reg & 0x00004000)) + printk(KERN_DEBUG DRV_NAME ": UDMA not BIOS enabled.\n"); + reg |= 0x00004000; /* enable UDMA/33 support */ + pci_write_config_dword(isa_dev, 0x64, reg); + pci_dev_put(isa_dev); + return 0; + } + printk(KERN_WARNING "ata_serverworks: Unable to find bridge.\n"); + return -ENODEV; +} + +static int serverworks_fixup_csb(struct pci_dev *pdev) +{ + u8 rev; + u8 btr; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + + /* Third Channel Test */ + if (!(PCI_FUNC(pdev->devfn) & 1)) { + struct pci_dev * findev = NULL; + u32 reg4c = 0; + findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL); + if (findev) { + pci_read_config_dword(findev, 0x4C, ®4c); + reg4c &= ~0x000007FF; + reg4c |= 0x00000040; + reg4c |= 0x00000020; + pci_write_config_dword(findev, 0x4C, reg4c); + pci_dev_put(findev); + } + } else { + struct pci_dev * findev = NULL; + u8 reg41 = 0; + + findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL); + if (findev) { + pci_read_config_byte(findev, 0x41, ®41); + reg41 &= ~0x40; + pci_write_config_byte(findev, 0x41, reg41); + pci_dev_put(findev); + } + } + /* setup the UDMA Control register + * + * 1. clear bit 6 to enable DMA + * 2. enable DMA modes with bits 0-1 + * 00 : legacy + * 01 : udma2 + * 10 : udma2/udma4 + * 11 : udma2/udma4/udma5 + */ + pci_read_config_byte(pdev, 0x5A, &btr); + btr &= ~0x40; + if (!(PCI_FUNC(pdev->devfn) & 1)) + btr |= 0x2; + else + btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; + pci_write_config_byte(pdev, 0x5A, btr); + + return btr; +} + +static void serverworks_fixup_ht1000(struct pci_dev *pdev) +{ + u8 btr; + /* Setup HT1000 SouthBridge Controller - Single Channel Only */ + pci_read_config_byte(pdev, 0x5A, &btr); + btr &= ~0x40; + btr |= 0x3; + pci_write_config_byte(pdev, 0x5A, btr); +} + + +static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int ports = 2; + static struct ata_port_info info[4] = { + { /* OSB4 */ + .sht = &serverworks_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x07, + .port_ops = &serverworks_osb4_port_ops + }, { /* OSB4 no UDMA */ + .sht = &serverworks_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x00, + .port_ops = &serverworks_osb4_port_ops + }, { /* CSB5 */ + .sht = &serverworks_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, + .port_ops = &serverworks_csb_port_ops + }, { /* CSB5 - later revisions*/ + .sht = &serverworks_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &serverworks_csb_port_ops + } + }; + static struct ata_port_info *port_info[2]; + struct ata_port_info *devinfo = &info[id->driver_data]; + + /* Force master latency timer to 64 PCI clocks */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); + + /* OSB4 : South Bridge and IDE */ + if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { + /* Select non UDMA capable OSB4 if we can't do fixups */ + if ( serverworks_fixup_osb4(pdev) < 0) + devinfo = &info[1]; + } + /* setup CSB5/CSB6 : South Bridge and IDE option RAID */ + else if ((pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) || + (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || + (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) { + + /* If the returned btr is the newer revision then + select the right info block */ + if (serverworks_fixup_csb(pdev) == 3) + devinfo = &info[3]; + + /* Is this the 3rd channel CSB6 IDE ? */ + if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) + ports = 1; + } + /* setup HT1000E */ + else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) + serverworks_fixup_ht1000(pdev); + + if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) + ata_pci_clear_simplex(pdev); + + port_info[0] = port_info[1] = devinfo; + return ata_pci_init_one(pdev, port_info, ports); +} + +static struct pci_device_id serverworks[] = { + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0}, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 2}, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2}, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 2}, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 2}, + { 0, }, +}; + +static struct pci_driver serverworks_pci_driver = { + .name = DRV_NAME, + .id_table = serverworks, + .probe = serverworks_init_one, + .remove = ata_pci_remove_one +}; + +static int __init serverworks_init(void) +{ + return pci_register_driver(&serverworks_pci_driver); +} + + +static void __exit serverworks_exit(void) +{ + pci_unregister_driver(&serverworks_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Serverworks OSB4/CSB5/CSB6"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, serverworks); +MODULE_VERSION(DRV_VERSION); + +module_init(serverworks_init); +module_exit(serverworks_exit); diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c new file mode 100644 index 0000000..8f7db96 --- /dev/null +++ b/drivers/ata/pata_sil680.c @@ -0,0 +1,381 @@ +/* + * pata_sil680.c - SIL680 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * based upon + * + * linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003 + * + * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2003 Red Hat <alan@redhat.com> + * + * May be copied or modified under the terms of the GNU General Public License + * + * Documentation publically available. + * + * If you have strange problems with nVidia chipset systems please + * see the SI support documentation and update your system BIOS + * if neccessary + * + * TODO + * If we know all our devices are LBA28 (or LBA28 sized) we could use + * the command fifo mode. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_sil680" +#define DRV_VERSION "0.3.2" + +/** + * sil680_selreg - return register base + * @hwif: interface + * @r: config offset + * + * Turn a config register offset into the right address in either + * PCI space or MMIO space to access the control register in question + * Thankfully this is a configuration operation so isnt performance + * criticial. + */ + +static unsigned long sil680_selreg(struct ata_port *ap, int r) +{ + unsigned long base = 0xA0 + r; + base += (ap->port_no << 4); + return base; +} + +/** + * sil680_seldev - return register base + * @hwif: interface + * @r: config offset + * + * Turn a config register offset into the right address in either + * PCI space or MMIO space to access the control register in question + * including accounting for the unit shift. + */ + +static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r) +{ + unsigned long base = 0xA0 + r; + base += (ap->port_no << 4); + base |= adev->devno ? 2 : 0; + return base; +} + + +/** + * sil680_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection. The SIL680 stores this in PCI config + * space for us. + */ + +static int sil680_cable_detect(struct ata_port *ap) { + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long addr = sil680_selreg(ap, 0); + u8 ata66; + pci_read_config_byte(pdev, addr, &ata66); + if (ata66 & 1) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +static int sil680_pre_reset(struct ata_port *ap) +{ + ap->cbl = sil680_cable_detect(ap); + return ata_std_prereset(ap); +} + +/** + * sil680_bus_reset - reset the SIL680 bus + * @ap: ATA port to reset + * + * Perform the SIL680 housekeeping when doing an ATA bus reset + */ + +static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long addr = sil680_selreg(ap, 0); + u8 reset; + + pci_read_config_byte(pdev, addr, &reset); + pci_write_config_byte(pdev, addr, reset | 0x03); + udelay(25); + pci_write_config_byte(pdev, addr, reset); + return ata_std_softreset(ap, classes); +} + +static void sil680_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, sil680_pre_reset, sil680_bus_reset, NULL, ata_std_postreset); +} + +/** + * sil680_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the SIL680 registers for PIO mode. Note that the task speed + * registers are shared between the devices so we must pick the lowest + * mode for command work. + */ + +static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 }; + static u16 speed_t[5] = { 0x328A, 0x1281, 0x1281, 0x10C3, 0x10C1 }; + + unsigned long tfaddr = sil680_selreg(ap, 0x02); + unsigned long addr = sil680_seldev(ap, adev, 0x04); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int pio = adev->pio_mode - XFER_PIO_0; + int lowest_pio = pio; + u16 reg; + + struct ata_device *pair = ata_dev_pair(adev); + + if (pair != NULL && adev->pio_mode > pair->pio_mode) + lowest_pio = pair->pio_mode - XFER_PIO_0; + + pci_write_config_word(pdev, addr, speed_p[pio]); + pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]); + + pci_read_config_word(pdev, tfaddr-2, ®); + reg &= ~0x0200; /* Clear IORDY */ + if (ata_pio_need_iordy(adev)) + reg |= 0x0200; /* Enable IORDY */ + pci_write_config_word(pdev, tfaddr-2, reg); +} + +/** + * sil680_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Program the MWDMA/UDMA modes for the sil680 k + * chipset. The MWDMA mode values are pulled from a lookup table + * while the chipset uses mode number for UDMA. + */ + +static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static u8 ultra_table[2][7] = { + { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF }, /* 100MHz */ + { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }, /* 133Mhz */ + }; + static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long ma = sil680_seldev(ap, adev, 0x08); + unsigned long ua = sil680_seldev(ap, adev, 0x0C); + unsigned long addr_mask = 0x80 + 4 * ap->port_no; + int port_shift = adev->devno * 4; + u8 scsc, mode; + u16 multi, ultra; + + pci_read_config_byte(pdev, 0x8A, &scsc); + pci_read_config_byte(pdev, addr_mask, &mode); + pci_read_config_word(pdev, ma, &multi); + pci_read_config_word(pdev, ua, &ultra); + + /* Mask timing bits */ + ultra &= ~0x3F; + mode &= ~(0x03 << port_shift); + + /* Extract scsc */ + scsc = (scsc & 0x30) ? 1: 0; + + if (adev->dma_mode >= XFER_UDMA_0) { + multi = 0x10C1; + ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0]; + mode |= (0x03 << port_shift); + } else { + multi = dma_table[adev->dma_mode - XFER_MW_DMA_0]; + mode |= (0x02 << port_shift); + } + pci_write_config_byte(pdev, addr_mask, mode); + pci_write_config_word(pdev, ma, multi); + pci_write_config_word(pdev, ua, ultra); +} + +static struct scsi_host_template sil680_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations sil680_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = sil680_set_piomode, + .set_dmamode = sil680_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sil680_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &sil680_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &sil680_port_ops + }; + static struct ata_port_info info_slow = { + .sht = &sil680_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &sil680_port_ops + }; + static struct ata_port_info *port_info[2] = {&info, &info}; + static int printed_version; + u32 class_rev = 0; + u8 tmpbyte = 0; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + /* FIXME: double check */ + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255); + + pci_write_config_byte(pdev, 0x80, 0x00); + pci_write_config_byte(pdev, 0x84, 0x00); + + pci_read_config_byte(pdev, 0x8A, &tmpbyte); + + printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n", + tmpbyte & 1, tmpbyte & 0x30); + + switch(tmpbyte & 0x30) { + case 0x00: + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10); + break; + case 0x30: + /* if clocking is disabled */ + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20); + break; + case 0x10: + /* 133 already */ + break; + case 0x20: + /* BIOS set PCI x2 clocking */ + break; + } + + pci_read_config_byte(pdev, 0x8A, &tmpbyte); + printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n", + tmpbyte & 1, tmpbyte & 0x30); + if ((tmpbyte & 0x30) == 0) + port_info[0] = port_info[1] = &info_slow; + + pci_write_config_byte(pdev, 0xA1, 0x72); + pci_write_config_word(pdev, 0xA2, 0x328A); + pci_write_config_dword(pdev, 0xA4, 0x62DD62DD); + pci_write_config_dword(pdev, 0xA8, 0x43924392); + pci_write_config_dword(pdev, 0xAC, 0x40094009); + pci_write_config_byte(pdev, 0xB1, 0x72); + pci_write_config_word(pdev, 0xB2, 0x328A); + pci_write_config_dword(pdev, 0xB4, 0x62DD62DD); + pci_write_config_dword(pdev, 0xB8, 0x43924392); + pci_write_config_dword(pdev, 0xBC, 0x40094009); + + switch(tmpbyte & 0x30) { + case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break; + case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break; + case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break; + /* This last case is _NOT_ ok */ + case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n"); + return -EIO; + } + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id sil680[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680), }, + { 0, }, +}; + +static struct pci_driver sil680_pci_driver = { + .name = DRV_NAME, + .id_table = sil680, + .probe = sil680_init_one, + .remove = ata_pci_remove_one +}; + +static int __init sil680_init(void) +{ + return pci_register_driver(&sil680_pci_driver); +} + + +static void __exit sil680_exit(void) +{ + pci_unregister_driver(&sil680_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for SI680 PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil680); +MODULE_VERSION(DRV_VERSION); + +module_init(sil680_init); +module_exit(sil680_exit); diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c new file mode 100644 index 0000000..2e555168 --- /dev/null +++ b/drivers/ata/pata_sis.c @@ -0,0 +1,1034 @@ +/* + * pata_sis.c - SiS ATA driver + * + * (C) 2005 Red Hat <alan@redhat.com> + * + * Based upon linux/drivers/ide/pci/sis5513.c + * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer + * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz> + * SiS Taiwan : for direct support and hardware. + * Daniela Engert : for initial ATA100 advices and numerous others. + * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt : + * for checking code correctness, providing patches. + * Original tests and design on the SiS620 chipset. + * ATA100 tests and design on the SiS735 chipset. + * ATA16/33 support from specs + * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw> + * + * + * TODO + * Check MWDMA on drives that don't support MWDMA speed pio cycles ? + * More Testing + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/ata.h> + +#define DRV_NAME "pata_sis" +#define DRV_VERSION "0.4.3" + +struct sis_chipset { + u16 device; /* PCI host ID */ + struct ata_port_info *info; /* Info block */ + /* Probably add family, cable detect type etc here to clean + up code later */ +}; + +/** + * sis_port_base - return PCI configuration base for dev + * @adev: device + * + * Returns the base of the PCI configuration registers for this port + * number. + */ + +static int sis_port_base(struct ata_device *adev) +{ + return 0x40 + (4 * adev->ap->port_no) + (2 * adev->devno); +} + +/** + * sis_133_pre_reset - check for 40/80 pin + * @ap: Port + * + * Perform cable detection for the later UDMA133 capable + * SiS chipset. + */ + +static int sis_133_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits sis_enable_bits[] = { + { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 tmp; + + if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + /* The top bit of this register is the cable detect bit */ + pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp); + if (tmp & 0x8000) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + + return ata_std_prereset(ap); +} + +/** + * sis_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, sis_133_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + + +/** + * sis_66_pre_reset - check for 40/80 pin + * @ap: Port + * + * Perform cable detection on the UDMA66, UDMA100 and early UDMA133 + * SiS IDE controllers. + */ + +static int sis_66_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits sis_enable_bits[] = { + { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + /* Older chips keep cable detect in bits 4/5 of reg 0x48 */ + pci_read_config_byte(pdev, 0x48, &tmp); + tmp >>= ap->port_no; + if (tmp & 0x10) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + + return ata_std_prereset(ap); +} + +/** + * sis_66_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * @classes: + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_66_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, sis_66_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * sis_old_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int sis_old_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits sis_enable_bits[] = { + { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + +/** + * sis_old_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_old_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, sis_old_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * sis_set_fifo - Set RWP fifo bits for this device + * @ap: Port + * @adev: Device + * + * SIS chipsets implement prefetch/postwrite bits for each device + * on both channels. This functionality is not ATAPI compatible and + * must be configured according to the class of device present + */ + +static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 fifoctrl; + u8 mask = 0x11; + + mask <<= (2 * ap->port_no); + mask <<= adev->devno; + + /* This holds various bits including the FIFO control */ + pci_read_config_byte(pdev, 0x4B, &fifoctrl); + fifoctrl &= ~mask; + + /* Enable for ATA (disk) only */ + if (adev->class == ATA_DEV_ATA) + fifoctrl |= mask; + pci_write_config_byte(pdev, 0x4B, fifoctrl); +} + +/** + * sis_old_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for all chips that are pre ATA100 and + * also early ATA100 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_port_base(adev); + u8 t1, t2; + int speed = adev->pio_mode - XFER_PIO_0; + + const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 }; + const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 }; + + sis_set_fifo(ap, adev); + + pci_read_config_byte(pdev, port, &t1); + pci_read_config_byte(pdev, port + 1, &t2); + + t1 &= ~0x0F; /* Clear active/recovery timings */ + t2 &= ~0x07; + + t1 |= active[speed]; + t2 |= recovery[speed]; + + pci_write_config_byte(pdev, port, t1); + pci_write_config_byte(pdev, port + 1, t2); +} + +/** + * sis_100_set_pioode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for ATA100 devices and early ATA133. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_port_base(adev); + int speed = adev->pio_mode - XFER_PIO_0; + + const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 }; + + sis_set_fifo(ap, adev); + + pci_write_config_byte(pdev, port, actrec[speed]); +} + +/** + * sis_133_set_pioode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for the later ATA133 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x40; + u32 t1; + u32 reg54; + int speed = adev->pio_mode - XFER_PIO_0; + + const u32 timing133[] = { + 0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */ + 0x0C266000, + 0x04263000, + 0x0C0A3000, + 0x05093000 + }; + const u32 timing100[] = { + 0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */ + 0x091C4000, + 0x031C2000, + 0x09072000, + 0x04062000 + }; + + sis_set_fifo(ap, adev); + + /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */ + pci_read_config_dword(pdev, 0x54, ®54); + if (reg54 & 0x40000000) + port = 0x70; + port += 8 * ap->port_no + 4 * adev->devno; + + pci_read_config_dword(pdev, port, &t1); + t1 &= 0xC0C00FFF; /* Mask out timing */ + + if (t1 & 0x08) /* 100 or 133 ? */ + t1 |= timing133[speed]; + else + t1 |= timing100[speed]; + pci_write_config_byte(pdev, port, t1); +} + +/** + * sis_old_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles pre UDMA and UDMA33 devices. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_port_base(adev); + u16 timing; + + const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; + const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 }; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* bits 3-0 hold recovery timing bits 8-10 active timing and + the higer bits are dependant on the device */ + timing &= ~ 0x870F; + timing |= mwdma_bits[speed]; + pci_write_config_word(pdev, drive_pci, timing); + } else { + /* Bit 15 is UDMA on/off, bit 13-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x6000; + timing |= udma_bits[speed]; + } +} + +/** + * sis_66_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles UDMA66 and early UDMA100 devices. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_port_base(adev); + u16 timing; + + const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; + const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000}; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* bits 3-0 hold recovery timing bits 8-10 active timing and + the higer bits are dependant on the device, bit 15 udma */ + timing &= ~ 0x870F; + timing |= mwdma_bits[speed]; + } else { + /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x6000; + timing |= udma_bits[speed]; + } + pci_write_config_word(pdev, drive_pci, timing); +} + +/** + * sis_100_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles UDMA66 and early UDMA100 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_port_base(adev); + u16 timing; + + const u16 udma_bits[] = { 0x8B00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100}; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ + } else { + /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x0F00; + timing |= udma_bits[speed]; + } + pci_write_config_word(pdev, drive_pci, timing); +} + +/** + * sis_133_early_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles early SiS 961 bridges. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_port_base(adev); + u16 timing; + + const u16 udma_bits[] = { 0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100}; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ + } else { + /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x0F00; + timing |= udma_bits[speed]; + } + pci_write_config_word(pdev, drive_pci, timing); +} + +/** + * sis_133_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles early SiS 961 bridges. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int port = 0x40; + u32 t1; + u32 reg54; + + /* bits 4- cycle time 8 - cvs time */ + const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 }; + const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 }; + + /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */ + pci_read_config_dword(pdev, 0x54, ®54); + if (reg54 & 0x40000000) + port = 0x70; + port += (8 * ap->port_no) + (4 * adev->devno); + + pci_read_config_dword(pdev, port, &t1); + + if (adev->dma_mode < XFER_UDMA_0) { + t1 &= ~0x00000004; + /* FIXME: need data sheet to add MWDMA here. Also lacking on + ide/pci driver */ + } else { + speed = adev->dma_mode - XFER_UDMA_0; + /* if & 8 no UDMA133 - need info for ... */ + t1 &= ~0x00000FF0; + t1 |= 0x00000004; + if (t1 & 0x08) + t1 |= timing_u133[speed]; + else + t1 |= timing_u100[speed]; + } + pci_write_config_dword(pdev, port, t1); +} + +static struct scsi_host_template sis_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations sis_133_ops = { + .port_disable = ata_port_disable, + .set_piomode = sis_133_set_piomode, + .set_dmamode = sis_133_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sis_133_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static const struct ata_port_operations sis_133_early_ops = { + .port_disable = ata_port_disable, + .set_piomode = sis_100_set_piomode, + .set_dmamode = sis_133_early_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sis_66_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static const struct ata_port_operations sis_100_ops = { + .port_disable = ata_port_disable, + .set_piomode = sis_100_set_piomode, + .set_dmamode = sis_100_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sis_66_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static const struct ata_port_operations sis_66_ops = { + .port_disable = ata_port_disable, + .set_piomode = sis_old_set_piomode, + .set_dmamode = sis_66_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sis_66_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static const struct ata_port_operations sis_old_ops = { + .port_disable = ata_port_disable, + .set_piomode = sis_old_set_piomode, + .set_dmamode = sis_old_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = sis_old_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static struct ata_port_info sis_info = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, + .udma_mask = 0, + .port_ops = &sis_old_ops, +}; +static struct ata_port_info sis_info33 = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA2, /* UDMA 33 */ + .port_ops = &sis_old_ops, +}; +static struct ata_port_info sis_info66 = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA4, /* UDMA 66 */ + .port_ops = &sis_66_ops, +}; +static struct ata_port_info sis_info100 = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA5, + .port_ops = &sis_100_ops, +}; +static struct ata_port_info sis_info100_early = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .udma_mask = ATA_UDMA5, + .pio_mask = 0x1f, /* pio0-4 */ + .port_ops = &sis_66_ops, +}; +static struct ata_port_info sis_info133 = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &sis_133_ops, +}; +static struct ata_port_info sis_info133_early = { + .sht = &sis_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &sis_133_early_ops, +}; + + +static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis) +{ + u16 regw; + u8 reg; + + if (sis->info == &sis_info133) { + pci_read_config_word(pdev, 0x50, ®w); + if (regw & 0x08) + pci_write_config_word(pdev, 0x50, regw & ~0x08); + pci_read_config_word(pdev, 0x52, ®w); + if (regw & 0x08) + pci_write_config_word(pdev, 0x52, regw & ~0x08); + return; + } + + if (sis->info == &sis_info133_early || sis->info == &sis_info100) { + /* Fix up latency */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); + /* Set compatibility bit */ + pci_read_config_byte(pdev, 0x49, ®); + if (!(reg & 0x01)) + pci_write_config_byte(pdev, 0x49, reg | 0x01); + return; + } + + if (sis->info == &sis_info66 || sis->info == &sis_info100_early) { + /* Fix up latency */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); + /* Set compatibility bit */ + pci_read_config_byte(pdev, 0x52, ®); + if (!(reg & 0x04)) + pci_write_config_byte(pdev, 0x52, reg | 0x04); + return; + } + + if (sis->info == &sis_info33) { + pci_read_config_byte(pdev, PCI_CLASS_PROG, ®); + if (( reg & 0x0F ) != 0x00) + pci_write_config_byte(pdev, PCI_CLASS_PROG, reg & 0xF0); + /* Fall through to ATA16 fixup below */ + } + + if (sis->info == &sis_info || sis->info == &sis_info33) { + /* force per drive recovery and active timings + needed on ATA_33 and below chips */ + pci_read_config_byte(pdev, 0x52, ®); + if (!(reg & 0x08)) + pci_write_config_byte(pdev, 0x52, reg|0x08); + return; + } + + BUG(); +} + +/** + * sis_init_one - Register SiS ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in sis_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info *port_info[2]; + struct ata_port_info *port; + struct pci_dev *host = NULL; + struct sis_chipset *chipset = NULL; + + static struct sis_chipset sis_chipsets[] = { + + { 0x0968, &sis_info133 }, + { 0x0966, &sis_info133 }, + { 0x0965, &sis_info133 }, + { 0x0745, &sis_info100 }, + { 0x0735, &sis_info100 }, + { 0x0733, &sis_info100 }, + { 0x0635, &sis_info100 }, + { 0x0633, &sis_info100 }, + + { 0x0730, &sis_info100_early }, /* 100 with ATA 66 layout */ + { 0x0550, &sis_info100_early }, /* 100 with ATA 66 layout */ + + { 0x0640, &sis_info66 }, + { 0x0630, &sis_info66 }, + { 0x0620, &sis_info66 }, + { 0x0540, &sis_info66 }, + { 0x0530, &sis_info66 }, + + { 0x5600, &sis_info33 }, + { 0x5598, &sis_info33 }, + { 0x5597, &sis_info33 }, + { 0x5591, &sis_info33 }, + { 0x5582, &sis_info33 }, + { 0x5581, &sis_info33 }, + + { 0x5596, &sis_info }, + { 0x5571, &sis_info }, + { 0x5517, &sis_info }, + { 0x5511, &sis_info }, + + {0} + }; + static struct sis_chipset sis133_early = { + 0x0, &sis_info133_early + }; + static struct sis_chipset sis133 = { + 0x0, &sis_info133 + }; + static struct sis_chipset sis100_early = { + 0x0, &sis_info100_early + }; + static struct sis_chipset sis100 = { + 0x0, &sis_info100 + }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + /* We have to find the bridge first */ + + for (chipset = &sis_chipsets[0]; chipset->device; chipset++) { + host = pci_get_device(PCI_VENDOR_ID_SI, chipset->device, NULL); + if (host != NULL) { + if (chipset->device == 0x630) { /* SIS630 */ + u8 host_rev; + pci_read_config_byte(host, PCI_REVISION_ID, &host_rev); + if (host_rev >= 0x30) /* 630 ET */ + chipset = &sis100_early; + } + break; + } + } + + /* Look for concealed bridges */ + if (host == NULL) { + /* Second check */ + u32 idemisc; + u16 trueid; + + /* Disable ID masking and register remapping then + see what the real ID is */ + + pci_read_config_dword(pdev, 0x54, &idemisc); + pci_write_config_dword(pdev, 0x54, idemisc & 0x7fffffff); + pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid); + pci_write_config_dword(pdev, 0x54, idemisc); + + switch(trueid) { + case 0x5518: /* SIS 962/963 */ + chipset = &sis133; + if ((idemisc & 0x40000000) == 0) { + pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000); + printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n"); + } + break; + case 0x0180: /* SIS 965/965L */ + chipset = &sis133; + break; + case 0x1180: /* SIS 966/966L */ + chipset = &sis133; + break; + } + } + + /* Further check */ + if (chipset == NULL) { + struct pci_dev *lpc_bridge; + u16 trueid; + u8 prefctl; + u8 idecfg; + u8 sbrev; + + /* Try the second unmasking technique */ + pci_read_config_byte(pdev, 0x4a, &idecfg); + pci_write_config_byte(pdev, 0x4a, idecfg | 0x10); + pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid); + pci_write_config_byte(pdev, 0x4a, idecfg); + + switch(trueid) { + case 0x5517: + lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */ + if (lpc_bridge == NULL) + break; + pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev); + pci_read_config_byte(pdev, 0x49, &prefctl); + pci_dev_put(lpc_bridge); + + if (sbrev == 0x10 && (prefctl & 0x80)) { + chipset = &sis133_early; + break; + } + chipset = &sis100; + break; + } + } + pci_dev_put(host); + + /* No chipset info, no support */ + if (chipset == NULL) + return -ENODEV; + + port = chipset->info; + port->private_data = chipset; + + sis_fixup(pdev, chipset); + + port_info[0] = port_info[1] = port; + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id sis_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x5513), }, /* SiS 5513 */ + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x5518), }, /* SiS 5518 */ + { } +}; + +static struct pci_driver sis_pci_driver = { + .name = DRV_NAME, + .id_table = sis_pci_tbl, + .probe = sis_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init sis_init(void) +{ + return pci_register_driver(&sis_pci_driver); +} + +static void __exit sis_exit(void) +{ + pci_unregister_driver(&sis_pci_driver); +} + + +module_init(sis_init); +module_exit(sis_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for SiS ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sis_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c new file mode 100644 index 0000000..f849978 --- /dev/null +++ b/drivers/ata/pata_sl82c105.c @@ -0,0 +1,388 @@ +/* + * pata_sl82c105.c - SL82C105 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * Based in part on linux/drivers/ide/pci/sl82c105.c + * SL82C105/Winbond 553 IDE driver + * + * and in part on the documentation and errata sheet + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_sl82c105" +#define DRV_VERSION "0.2.2" + +enum { + /* + * SL82C105 PCI config register 0x40 bits. + */ + CTRL_IDE_IRQB = (1 << 30), + CTRL_IDE_IRQA = (1 << 28), + CTRL_LEGIRQ = (1 << 11), + CTRL_P1F16 = (1 << 5), + CTRL_P1EN = (1 << 4), + CTRL_P0F16 = (1 << 1), + CTRL_P0EN = (1 << 0) +}; + +/** + * sl82c105_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int sl82c105_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits sl82c105_enable_bits[] = { + { 0x40, 1, 0x01, 0x01 }, + { 0x40, 1, 0x10, 0x10 } + }; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no])) { + ata_port_disable(ap); + dev_printk(KERN_INFO, &pdev->dev, "port disabled. ignoring.\n"); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + +static void sl82c105_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, sl82c105_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + + +/** + * sl82c105_configure_piomode - set chip PIO timing + * @ap: ATA interface + * @adev: ATA device + * @pio: PIO mode + * + * Called to do the PIO mode setup. Our timing registers are shared + * so a configure_dmamode call will undo any work we do here and vice + * versa + */ + +static void sl82c105_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static u16 pio_timing[5] = { + 0x50D, 0x407, 0x304, 0x242, 0x240 + }; + u16 dummy; + int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno); + + pci_write_config_word(pdev, timing, pio_timing[pio]); + /* Can we lose this oddity of the old driver */ + pci_read_config_word(pdev, timing, &dummy); +} + +/** + * sl82c105_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Our timing registers are shared + * but we want to set the PIO timing by default. + */ + +static void sl82c105_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + sl82c105_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * sl82c105_configure_dmamode - set DMA mode in chip + * @ap: ATA interface + * @adev: ATA device + * + * Load DMA cycle times into the chip ready for a DMA transfer + * to occur. + */ + +static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static u16 dma_timing[3] = { + 0x707, 0x201, 0x200 + }; + u16 dummy; + int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno); + int dma = adev->dma_mode - XFER_MW_DMA_0; + + pci_write_config_word(pdev, timing, dma_timing[dma]); + /* Can we lose this oddity of the old driver */ + pci_read_config_word(pdev, timing, &dummy); +} + +/** + * sl82c105_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. This replaces the PIO timings + * for the device in question. Set appropriate PIO timings not DMA + * timings at this point. + */ + +static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + switch(adev->dma_mode) { + case XFER_MW_DMA_0: + sl82c105_configure_piomode(ap, adev, 1); + break; + case XFER_MW_DMA_1: + sl82c105_configure_piomode(ap, adev, 3); + break; + case XFER_MW_DMA_2: + sl82c105_configure_piomode(ap, adev, 3); + break; + default: + BUG(); + } +} + +/** + * sl82c105_reset_engine - Reset the DMA engine + * @ap: ATA interface + * + * The sl82c105 has some serious problems with the DMA engine + * when transfers don't run as expected or ATAPI is used. The + * recommended fix is to reset the engine each use using a chip + * test register. + */ + +static void sl82c105_reset_engine(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 val; + + pci_read_config_word(pdev, 0x7E, &val); + pci_write_config_word(pdev, 0x7E, val | 4); + pci_write_config_word(pdev, 0x7E, val & ~4); +} + +/** + * sl82c105_bmdma_start - DMA engine begin + * @qc: ATA command + * + * Reset the DMA engine each use as recommended by the errata + * document. + * + * FIXME: if we switch clock at BMDMA start/end we might get better + * PIO performance on DMA capable devices. + */ + +static void sl82c105_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + sl82c105_reset_engine(ap); + + /* Set the clocks for DMA */ + sl82c105_configure_dmamode(ap, qc->dev); + /* Activate DMA */ + ata_bmdma_start(qc); +} + +/** + * sl82c105_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Reset the DMA engine each use as recommended by the errata + * document. + * + * This function is also called to turn off DMA when a timeout occurs + * during DMA operation. In both cases we need to reset the engine, + * so no actual eng_timeout handler is required. + * + * We assume bmdma_stop is always called if bmdma_start as called. If + * not then we may need to wrap qc_issue. + */ + +static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + ata_bmdma_stop(qc); + sl82c105_reset_engine(ap); + + /* This will redo the initial setup of the DMA device to matching + PIO timings */ + sl82c105_set_dmamode(ap, qc->dev); +} + +static struct scsi_host_template sl82c105_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations sl82c105_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = sl82c105_set_piomode, + .set_dmamode = sl82c105_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = sl82c105_error_handler, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = sl82c105_bmdma_start, + .bmdma_stop = sl82c105_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * sl82c105_bridge_revision - find bridge version + * @pdev: PCI device for the ATA function + * + * Locates the PCI bridge associated with the ATA function and + * providing it is a Winbond 553 reports the revision. If it cannot + * find a revision or the right device it returns -1 + */ + +static int sl82c105_bridge_revision(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + u8 rev; + + /* + * The bridge should be part of the same device, but function 0. + */ + bridge = pci_get_slot(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); + if (!bridge) + return -1; + + /* + * Make sure it is a Winbond 553 and is an ISA bridge. + */ + if (bridge->vendor != PCI_VENDOR_ID_WINBOND || + bridge->device != PCI_DEVICE_ID_WINBOND_83C553 || + bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) { + pci_dev_put(bridge); + return -1; + } + /* + * We need to find function 0's revision, not function 1 + */ + pci_read_config_byte(bridge, PCI_REVISION_ID, &rev); + + pci_dev_put(bridge); + return rev; +} + + +static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info_dma = { + .sht = &sl82c105_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &sl82c105_port_ops + }; + static struct ata_port_info info_early = { + .sht = &sl82c105_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &sl82c105_port_ops + }; + static struct ata_port_info *port_info[2] = { &info_early, &info_early }; + u32 val; + int rev; + + rev = sl82c105_bridge_revision(dev); + + if (rev == -1) + dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Unable to find bridge, disabling DMA.\n"); + else if (rev <= 5) + dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Early bridge revision, no DMA available.\n"); + else { + port_info[0] = &info_dma; + port_info[1] = &info_dma; + } + + pci_read_config_dword(dev, 0x40, &val); + val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; + pci_write_config_dword(dev, 0x40, val); + + + return ata_pci_init_one(dev, port_info, 1); /* For now */ +} + +static struct pci_device_id sl82c105[] = { + { PCI_DEVICE(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105), }, + { 0, }, +}; + +static struct pci_driver sl82c105_pci_driver = { + .name = DRV_NAME, + .id_table = sl82c105, + .probe = sl82c105_init_one, + .remove = ata_pci_remove_one +}; + +static int __init sl82c105_init(void) +{ + return pci_register_driver(&sl82c105_pci_driver); +} + + +static void __exit sl82c105_exit(void) +{ + pci_unregister_driver(&sl82c105_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Sl82c105"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sl82c105); +MODULE_VERSION(DRV_VERSION); + +module_init(sl82c105_init); +module_exit(sl82c105_exit); diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c new file mode 100644 index 0000000..36f7887 --- /dev/null +++ b/drivers/ata/pata_triflex.c @@ -0,0 +1,285 @@ +/* + * pata_triflex.c - Compaq PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * based upon + * + * triflex.c + * + * IDE Chipset driver for the Compaq TriFlex IDE controller. + * + * Known to work with the Compaq Workstation 5x00 series. + * + * Copyright (C) 2002 Hewlett-Packard Development Group, L.P. + * Author: Torben Mathiasen <torben.mathiasen@hp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Not publically available. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_triflex" +#define DRV_VERSION "0.2.5" + +/** + * triflex_probe_init - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int triflex_probe_init(struct ata_port *ap) +{ + static const struct pci_bits triflex_enable_bits[] = { + { 0x80, 1, 0x01, 0x01 }, + { 0x80, 1, 0x02, 0x02 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + + +static void triflex_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, triflex_probe_init, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * triflex_load_timing - timing configuration + * @ap: ATA interface + * @adev: Device on the bus + * @speed: speed to configure + * + * The Triflex has one set of timings per device per channel. This + * means we must do some switching. As the PIO and DMA timings don't + * match we have to do some reloading unlike PIIX devices where tuning + * tricks can avoid it. + */ + +static void triflex_load_timing(struct ata_port *ap, struct ata_device *adev, int speed) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 timing = 0; + u32 triflex_timing, old_triflex_timing; + int channel_offset = ap->port_no ? 0x74: 0x70; + unsigned int is_slave = (adev->devno != 0); + + + pci_read_config_dword(pdev, channel_offset, &old_triflex_timing); + triflex_timing = old_triflex_timing; + + switch(speed) + { + case XFER_MW_DMA_2: + timing = 0x0103;break; + case XFER_MW_DMA_1: + timing = 0x0203;break; + case XFER_MW_DMA_0: + timing = 0x0808;break; + case XFER_SW_DMA_2: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + timing = 0x0F0F;break; + case XFER_PIO_4: + timing = 0x0202;break; + case XFER_PIO_3: + timing = 0x0204;break; + case XFER_PIO_2: + timing = 0x0404;break; + case XFER_PIO_1: + timing = 0x0508;break; + case XFER_PIO_0: + timing = 0x0808;break; + default: + BUG(); + } + triflex_timing &= ~ (0xFFFF << (16 * is_slave)); + triflex_timing |= (timing << (16 * is_slave)); + + if (triflex_timing != old_triflex_timing) + pci_write_config_dword(pdev, channel_offset, triflex_timing); +} + +/** + * triflex_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Use the timing loader to set up the PIO mode. We have to do this + * because DMA start/stop will only be called once DMA occurs. If there + * has been no DMA then the PIO timings are still needed. + */ +static void triflex_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + triflex_load_timing(ap, adev, adev->pio_mode); +} + +/** + * triflex_dma_start - DMA start callback + * @qc: Command in progress + * + * Usually drivers set the DMA timing at the point the set_dmamode call + * is made. Triflex however requires we load new timings on the + * transition or keep matching PIO/DMA pairs (ie MWDMA2/PIO4 etc). + * We load the DMA timings just before starting DMA and then restore + * the PIO timing when the DMA is finished. + */ + +static void triflex_bmdma_start(struct ata_queued_cmd *qc) +{ + triflex_load_timing(qc->ap, qc->dev, qc->dev->dma_mode); + ata_bmdma_start(qc); +} + +/** + * triflex_dma_stop - DMA stop callback + * @ap: ATA interface + * @adev: ATA device + * + * We loaded new timings in dma_start, as a result we need to restore + * the PIO timings in dma_stop so that the next command issue gets the + * right clock values. + */ + +static void triflex_bmdma_stop(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); + triflex_load_timing(qc->ap, qc->dev, qc->dev->pio_mode); +} + +static struct scsi_host_template triflex_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations triflex_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = triflex_set_piomode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = triflex_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = triflex_bmdma_start, + .bmdma_stop = triflex_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &triflex_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &triflex_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + static int printed_version; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); + + return ata_pci_init_one(dev, port_info, 2); +} + +static const struct pci_device_id triflex[] = { + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, }, +}; + +static struct pci_driver triflex_pci_driver = { + .name = DRV_NAME, + .id_table = triflex, + .probe = triflex_init_one, + .remove = ata_pci_remove_one +}; + +static int __init triflex_init(void) +{ + return pci_register_driver(&triflex_pci_driver); +} + + +static void __exit triflex_exit(void) +{ + pci_unregister_driver(&triflex_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Compaq Triflex"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, triflex); +MODULE_VERSION(DRV_VERSION); + +module_init(triflex_init); +module_exit(triflex_exit); diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c new file mode 100644 index 0000000..1b2ff13 --- /dev/null +++ b/drivers/ata/pata_via.c @@ -0,0 +1,568 @@ +/* + * pata_via.c - VIA PATA for new ATA layer + * (C) 2005-2006 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * Documentation + * Most chipset documentation available under NDA only + * + * VIA version guide + * VIA VT82C561 - early design, uses ata_generic currently + * VIA VT82C576 - MWDMA, 33Mhz + * VIA VT82C586 - MWDMA, 33Mhz + * VIA VT82C586a - Added UDMA to 33Mhz + * VIA VT82C586b - UDMA33 + * VIA VT82C596a - Nonfunctional UDMA66 + * VIA VT82C596b - Working UDMA66 + * VIA VT82C686 - Nonfunctional UDMA66 + * VIA VT82C686a - Working UDMA66 + * VIA VT82C686b - Updated to UDMA100 + * VIA VT8231 - UDMA100 + * VIA VT8233 - UDMA100 + * VIA VT8233a - UDMA133 + * VIA VT8233c - UDMA100 + * VIA VT8235 - UDMA133 + * VIA VT8237 - UDMA133 + * + * Most registers remain compatible across chips. Others start reserved + * and acquire sensible semantics if set to 1 (eg cable detect). A few + * exceptions exist, notably around the FIFO settings. + * + * One additional quirk of the VIA design is that like ALi they use few + * PCI IDs for a lot of chips. + * + * Based heavily on: + * + * Version 3.38 + * + * VIA IDE driver for Linux. Supported southbridges: + * + * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b, + * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a, + * vt8235, vt8237 + * + * Copyright (c) 2000-2002 Vojtech Pavlik + * + * Based on the work of: + * Michel Aubry + * Jeff Garzik + * Andre Hedrick + + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_via" +#define DRV_VERSION "0.1.13" + +/* + * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx + * driver. + */ + +enum { + VIA_UDMA = 0x007, + VIA_UDMA_NONE = 0x000, + VIA_UDMA_33 = 0x001, + VIA_UDMA_66 = 0x002, + VIA_UDMA_100 = 0x003, + VIA_UDMA_133 = 0x004, + VIA_BAD_PREQ = 0x010, /* Crashes if PREQ# till DDACK# set */ + VIA_BAD_CLK66 = 0x020, /* 66 MHz clock doesn't work correctly */ + VIA_SET_FIFO = 0x040, /* Needs to have FIFO split set */ + VIA_NO_UNMASK = 0x080, /* Doesn't work with IRQ unmasking on */ + VIA_BAD_ID = 0x100, /* Has wrong vendor ID (0x1107) */ + VIA_BAD_AST = 0x200, /* Don't touch Address Setup Timing */ + VIA_NO_ENABLES = 0x400, /* Has no enablebits */ +}; + +/* + * VIA SouthBridge chips. + */ + +static const struct via_isa_bridge { + const char *name; + u16 id; + u8 rev_min; + u8 rev_max; + u16 flags; +} via_isa_bridges[] = { + { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES}, + { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 }, + { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 }, + { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 }, + { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 }, + { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 }, + { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, + { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 }, + { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO }, + { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO }, + { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { NULL } +}; + +/** + * via_cable_detect - cable detection + * @ap: ATA port + * + * Perform cable detection. Actually for the VIA case the BIOS + * already did this for us. We read the values provided by the + * BIOS. If you are using an 8235 in a non-PC configuration you + * may need to update this code. + * + * Hotplug also impacts on this. + */ + +static int via_cable_detect(struct ata_port *ap) { + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 ata66; + + pci_read_config_dword(pdev, 0x50, &ata66); + /* Check both the drive cable reporting bits, we might not have + two drives */ + if (ata66 & (0x10100000 >> (16 * ap->port_no))) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +static int via_pre_reset(struct ata_port *ap) +{ + const struct via_isa_bridge *config = ap->host->private_data; + + if (!(config->flags & VIA_NO_ENABLES)) { + static const struct pci_bits via_enable_bits[] = { + { 0x40, 1, 0x02, 0x02 }, + { 0x40, 1, 0x01, 0x01 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + } + + if ((config->flags & VIA_UDMA) >= VIA_UDMA_66) + ap->cbl = via_cable_detect(ap); + else + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + +/** + * via_error_handler - reset for VIA chips + * @ap: ATA port + * + * Handle the reset callback for the later chips with cable detect + */ + +static void via_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, via_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * via_do_set_mode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * @mode: ATA mode being programmed + * @tdiv: Clocks per PCI clock + * @set_ast: Set to program address setup + * @udma_type: UDMA mode/format of registers + * + * Program the VIA registers for DMA and PIO modes. Uses the ata timing + * support in order to compute modes. + * + * FIXME: Hotplug will require we serialize multiple mode changes + * on the two channels. + */ + +static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mode, int tdiv, int set_ast, int udma_type) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_device *peer = ata_dev_pair(adev); + struct ata_timing t, p; + static int via_clock = 33333; /* Bus clock in kHZ - ought to be tunable one day */ + unsigned long T = 1000000000 / via_clock; + unsigned long UT = T/tdiv; + int ut; + int offset = 3 - (2*ap->port_no) - adev->devno; + + + /* Calculate the timing values we require */ + ata_timing_compute(adev, mode, &t, T, UT); + + /* We share 8bit timing so we must merge the constraints */ + if (peer) { + if (peer->pio_mode) { + ata_timing_compute(peer, peer->pio_mode, &p, T, UT); + ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT); + } + } + + /* Address setup is programmable but breaks on UDMA133 setups */ + if (set_ast) { + u8 setup; /* 2 bits per drive */ + int shift = 2 * offset; + + pci_read_config_byte(pdev, 0x4C, &setup); + setup &= ~(3 << shift); + setup |= FIT(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */ + pci_write_config_byte(pdev, 0x4C, setup); + } + + /* Load the PIO mode bits */ + pci_write_config_byte(pdev, 0x4F - ap->port_no, + ((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1)); + pci_write_config_byte(pdev, 0x48 + offset, + ((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1)); + + /* Load the UDMA bits according to type */ + switch(udma_type) { + default: + /* BUG() ? */ + /* fall through */ + case 33: + ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03; + break; + case 66: + ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f; + break; + case 100: + ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07; + break; + case 133: + ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07; + break; + } + /* Set UDMA unless device is not UDMA capable */ + if (udma_type) + pci_write_config_byte(pdev, 0x50 + offset, ut); +} + +static void via_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + const struct via_isa_bridge *config = ap->host->private_data; + int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; + int mode = config->flags & VIA_UDMA; + static u8 tclock[5] = { 1, 1, 2, 3, 4 }; + static u8 udma[5] = { 0, 33, 66, 100, 133 }; + + via_do_set_mode(ap, adev, adev->pio_mode, tclock[mode], set_ast, udma[mode]); +} + +static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + const struct via_isa_bridge *config = ap->host->private_data; + int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; + int mode = config->flags & VIA_UDMA; + static u8 tclock[5] = { 1, 1, 2, 3, 4 }; + static u8 udma[5] = { 0, 33, 66, 100, 133 }; + + via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]); +} + +static struct scsi_host_template via_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations via_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = via_set_piomode, + .set_dmamode = via_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = via_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations via_port_ops_noirq = { + .port_disable = ata_port_disable, + .set_piomode = via_set_piomode, + .set_dmamode = via_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = via_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer_noirq, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * via_init_one - discovery callback + * @pdev: PCI device ID + * @id: PCI table info + * + * A VIA IDE interface has been discovered. Figure out what revision + * and perform configuration work before handing it to the ATA layer + */ + +static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + /* Early VIA without UDMA support */ + static struct ata_port_info via_mwdma_info = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &via_port_ops + }; + /* Ditto with IRQ masking required */ + static struct ata_port_info via_mwdma_info_borked = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &via_port_ops_noirq, + }; + /* VIA UDMA 33 devices (and borked 66) */ + static struct ata_port_info via_udma33_info = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7, + .port_ops = &via_port_ops + }; + /* VIA UDMA 66 devices */ + static struct ata_port_info via_udma66_info = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x1f, + .port_ops = &via_port_ops + }; + /* VIA UDMA 100 devices */ + static struct ata_port_info via_udma100_info = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + .port_ops = &via_port_ops + }; + /* UDMA133 with bad AST (All current 133) */ + static struct ata_port_info via_udma133_info = { + .sht = &via_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, /* FIXME: should check north bridge */ + .port_ops = &via_port_ops + }; + struct ata_port_info *port_info[2], *type; + struct pci_dev *isa = NULL; + const struct via_isa_bridge *config; + static int printed_version; + u8 t; + u8 enable; + u32 timing; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + /* To find out how the IDE will behave and what features we + actually have to look at the bridge not the IDE controller */ + for (config = via_isa_bridges; config->id; config++) + if ((isa = pci_get_device(PCI_VENDOR_ID_VIA + + !!(config->flags & VIA_BAD_ID), + config->id, NULL))) { + + pci_read_config_byte(isa, PCI_REVISION_ID, &t); + if (t >= config->rev_min && + t <= config->rev_max) + break; + pci_dev_put(isa); + } + + if (!config->id) { + printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n"); + return -ENODEV; + } + pci_dev_put(isa); + + /* 0x40 low bits indicate enabled channels */ + pci_read_config_byte(pdev, 0x40 , &enable); + enable &= 3; + if (enable == 0) { + return -ENODEV; + } + + /* Initialise the FIFO for the enabled channels. */ + if (config->flags & VIA_SET_FIFO) { + u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20}; + u8 fifo; + + pci_read_config_byte(pdev, 0x43, &fifo); + + /* Clear PREQ# until DDACK# for errata */ + if (config->flags & VIA_BAD_PREQ) + fifo &= 0x7F; + else + fifo &= 0x9f; + /* Turn on FIFO for enabled channels */ + fifo |= fifo_setting[enable]; + pci_write_config_byte(pdev, 0x43, fifo); + } + /* Clock set up */ + switch(config->flags & VIA_UDMA) { + case VIA_UDMA_NONE: + if (config->flags & VIA_NO_UNMASK) + type = &via_mwdma_info_borked; + else + type = &via_mwdma_info; + break; + case VIA_UDMA_33: + type = &via_udma33_info; + break; + case VIA_UDMA_66: + type = &via_udma66_info; + /* The 66 MHz devices require we enable the clock */ + pci_read_config_dword(pdev, 0x50, &timing); + timing |= 0x80008; + pci_write_config_dword(pdev, 0x50, timing); + break; + case VIA_UDMA_100: + type = &via_udma100_info; + break; + case VIA_UDMA_133: + type = &via_udma133_info; + break; + default: + WARN_ON(1); + return -ENODEV; + } + + if (config->flags & VIA_BAD_CLK66) { + /* Disable the 66MHz clock on problem devices */ + pci_read_config_dword(pdev, 0x50, &timing); + timing &= ~0x80008; + pci_write_config_dword(pdev, 0x50, timing); + } + + /* We have established the device type, now fire it up */ + type->private_data = (void *)config; + + port_info[0] = port_info[1] = type; + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id via[] = { + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1), }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1), }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410), }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), }, + { 0, }, +}; + +static struct pci_driver via_pci_driver = { + .name = DRV_NAME, + .id_table = via, + .probe = via_init_one, + .remove = ata_pci_remove_one +}; + +static int __init via_init(void) +{ + return pci_register_driver(&via_pci_driver); +} + + +static void __exit via_exit(void) +{ + pci_unregister_driver(&via_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for VIA PATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, via); +MODULE_VERSION(DRV_VERSION); + +module_init(via_init); +module_exit(via_exit); diff --git a/drivers/scsi/pdc_adma.c b/drivers/ata/pdc_adma.c index efc8fff..0e23ecb 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -127,7 +127,7 @@ static int adma_ata_init_one (struct pci_dev *pdev, static irqreturn_t adma_intr (int irq, void *dev_instance, struct pt_regs *regs); static int adma_port_start(struct ata_port *ap); -static void adma_host_stop(struct ata_host_set *host_set); +static void adma_host_stop(struct ata_host *host); static void adma_port_stop(struct ata_port *ap); static void adma_phy_reset(struct ata_port *ap); static void adma_qc_prep(struct ata_queued_cmd *qc); @@ -182,7 +182,7 @@ static struct ata_port_info adma_port_info[] = { /* board_1841_idx */ { .sht = &adma_ata_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, .pio_mask = 0x10, /* pio4 */ @@ -237,7 +237,7 @@ static void adma_reset_engine(void __iomem *chan) static void adma_reinit_engine(struct ata_port *ap) { struct adma_port_priv *pp = ap->private_data; - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; void __iomem *chan = ADMA_REGS(mmio_base, ap->port_no); /* mask/clear ATA interrupts */ @@ -265,7 +265,7 @@ static void adma_reinit_engine(struct ata_port *ap) static inline void adma_enter_reg_mode(struct ata_port *ap) { - void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + void __iomem *chan = ADMA_REGS(ap->host->mmio_base, ap->port_no); writew(aPIOMD4, chan + ADMA_CONTROL); readb(chan + ADMA_STATUS); /* flush */ @@ -412,7 +412,7 @@ static void adma_qc_prep(struct ata_queued_cmd *qc) static inline void adma_packet_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + void __iomem *chan = ADMA_REGS(ap->host->mmio_base, ap->port_no); VPRINTK("ENTER, ap %p\n", ap); @@ -442,13 +442,13 @@ static unsigned int adma_qc_issue(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } -static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) +static inline unsigned int adma_intr_pkt(struct ata_host *host) { unsigned int handled = 0, port_no; - u8 __iomem *mmio_base = host_set->mmio_base; + u8 __iomem *mmio_base = host->mmio_base; - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { - struct ata_port *ap = host_set->ports[port_no]; + for (port_no = 0; port_no < host->n_ports; ++port_no) { + struct ata_port *ap = host->ports[port_no]; struct adma_port_priv *pp; struct ata_queued_cmd *qc; void __iomem *chan = ADMA_REGS(mmio_base, port_no); @@ -476,13 +476,13 @@ static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) return handled; } -static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) +static inline unsigned int adma_intr_mmio(struct ata_host *host) { unsigned int handled = 0, port_no; - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + for (port_no = 0; port_no < host->n_ports; ++port_no) { struct ata_port *ap; - ap = host_set->ports[port_no]; + ap = host->ports[port_no]; if (ap && (!(ap->flags & ATA_FLAG_DISABLED))) { struct ata_queued_cmd *qc; struct adma_port_priv *pp = ap->private_data; @@ -497,7 +497,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) continue; DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", ap->id, qc->tf.protocol, status); - + /* complete taskfile transaction */ pp->state = adma_state_idle; qc->err_mask |= ac_err_mask(status); @@ -511,14 +511,14 @@ static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) static irqreturn_t adma_intr(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int handled = 0; VPRINTK("ENTER\n"); - spin_lock(&host_set->lock); - handled = adma_intr_pkt(host_set) | adma_intr_mmio(host_set); - spin_unlock(&host_set->lock); + spin_lock(&host->lock); + handled = adma_intr_pkt(host) | adma_intr_mmio(host); + spin_unlock(&host->lock); VPRINTK("EXIT\n"); @@ -544,7 +544,7 @@ static void adma_ata_setup_port(struct ata_ioports *port, unsigned long base) static int adma_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct adma_port_priv *pp; int rc; @@ -582,10 +582,10 @@ err_out: static void adma_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct adma_port_priv *pp = ap->private_data; - adma_reset_engine(ADMA_REGS(ap->host_set->mmio_base, ap->port_no)); + adma_reset_engine(ADMA_REGS(ap->host->mmio_base, ap->port_no)); if (pp != NULL) { ap->private_data = NULL; if (pp->pkt != NULL) @@ -596,14 +596,14 @@ static void adma_port_stop(struct ata_port *ap) ata_port_stop(ap); } -static void adma_host_stop(struct ata_host_set *host_set) +static void adma_host_stop(struct ata_host *host) { unsigned int port_no; for (port_no = 0; port_no < ADMA_PORTS; ++port_no) - adma_reset_engine(ADMA_REGS(host_set->mmio_base, port_no)); + adma_reset_engine(ADMA_REGS(host->mmio_base, port_no)); - ata_pci_host_stop(host_set); + ata_pci_host_stop(host); } static void adma_host_init(unsigned int chip_id, @@ -684,7 +684,7 @@ static int adma_ata_init_one(struct pci_dev *pdev, INIT_LIST_HEAD(&probe_ent->node); probe_ent->sht = adma_port_info[board_idx].sht; - probe_ent->host_flags = adma_port_info[board_idx].host_flags; + probe_ent->port_flags = adma_port_info[board_idx].flags; probe_ent->pio_mask = adma_port_info[board_idx].pio_mask; probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask; probe_ent->udma_mask = adma_port_info[board_idx].udma_mask; @@ -722,7 +722,7 @@ err_out: static int __init adma_ata_init(void) { - return pci_module_init(&adma_ata_pci_driver); + return pci_register_driver(&adma_ata_pci_driver); } static void __exit adma_ata_exit(void) diff --git a/drivers/scsi/sata_mv.c b/drivers/ata/sata_mv.c index fa38a41..fdce6e0 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -342,7 +342,7 @@ static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); static void mv_phy_reset(struct ata_port *ap); static void __mv_phy_reset(struct ata_port *ap, int can_sleep); -static void mv_host_stop(struct ata_host_set *host_set); +static void mv_host_stop(struct ata_host *host); static int mv_port_start(struct ata_port *ap); static void mv_port_stop(struct ata_port *ap); static void mv_qc_prep(struct ata_queued_cmd *qc); @@ -480,35 +480,35 @@ static const struct ata_port_operations mv_iie_ops = { static const struct ata_port_info mv_port_info[] = { { /* chip_504x */ .sht = &mv_sht, - .host_flags = MV_COMMON_FLAGS, + .flags = MV_COMMON_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv5_ops, }, { /* chip_508x */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv5_ops, }, { /* chip_5080 */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv5_ops, }, { /* chip_604x */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv6_ops, }, { /* chip_608x */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -516,14 +516,14 @@ static const struct ata_port_info mv_port_info[] = { }, { /* chip_6042 */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_iie_ops, }, { /* chip_7042 */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -618,12 +618,12 @@ static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) static inline void __iomem *mv_ap_base(struct ata_port *ap) { - return mv_port_base(ap->host_set->mmio_base, ap->port_no); + return mv_port_base(ap->host->mmio_base, ap->port_no); } -static inline int mv_get_hc_count(unsigned long host_flags) +static inline int mv_get_hc_count(unsigned long port_flags) { - return ((host_flags & MV_FLAG_DUAL_HC) ? 2 : 1); + return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1); } static void mv_irq_clear(struct ata_port *ap) @@ -809,7 +809,7 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) /** * mv_host_stop - Host specific cleanup/stop routine. - * @host_set: host data structure + * @host: host data structure * * Disable ints, cleanup host memory, call general purpose * host_stop. @@ -817,10 +817,10 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) * LOCKING: * Inherited from caller. */ -static void mv_host_stop(struct ata_host_set *host_set) +static void mv_host_stop(struct ata_host *host) { - struct mv_host_priv *hpriv = host_set->private_data; - struct pci_dev *pdev = to_pci_dev(host_set->dev); + struct mv_host_priv *hpriv = host->private_data; + struct pci_dev *pdev = to_pci_dev(host->dev); if (hpriv->hp_flags & MV_HP_FLAG_MSI) { pci_disable_msi(pdev); @@ -828,7 +828,7 @@ static void mv_host_stop(struct ata_host_set *host_set) pci_intx(pdev, 0); } kfree(hpriv); - ata_host_stop(host_set); + ata_host_stop(host); } static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev) @@ -875,8 +875,8 @@ static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio) */ static int mv_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; - struct mv_host_priv *hpriv = ap->host_set->private_data; + struct device *dev = ap->host->dev; + struct mv_host_priv *hpriv = ap->host->private_data; struct mv_port_priv *pp; void __iomem *port_mmio = mv_ap_base(ap); void *mem; @@ -965,17 +965,17 @@ err_out: * Stop DMA, cleanup port memory. * * LOCKING: - * This routine uses the host_set lock to protect the DMA stop. + * This routine uses the host lock to protect the DMA stop. */ static void mv_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct mv_port_priv *pp = ap->private_data; unsigned long flags; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(&ap->host->lock, flags); mv_stop_dma(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(&ap->host->lock, flags); ap->private_data = NULL; ata_pad_free(ap, dev); @@ -1330,7 +1330,7 @@ static void mv_err_intr(struct ata_port *ap, int reset_allowed) /** * mv_host_intr - Handle all interrupts on the given host controller - * @host_set: host specific structure + * @host: host specific structure * @relevant: port error bits relevant to this host controller * @hc: which host controller we're to look at * @@ -1344,10 +1344,9 @@ static void mv_err_intr(struct ata_port *ap, int reset_allowed) * LOCKING: * Inherited from caller. */ -static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, - unsigned int hc) +static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) { - void __iomem *mmio = host_set->mmio_base; + void __iomem *mmio = host->mmio_base; void __iomem *hc_mmio = mv_hc_base(mmio, hc); struct ata_queued_cmd *qc; u32 hc_irq_cause; @@ -1371,7 +1370,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { u8 ata_status = 0; - struct ata_port *ap = host_set->ports[port]; + struct ata_port *ap = host->ports[port]; struct mv_port_priv *pp = ap->private_data; hard_port = mv_hardport_from_port(port); /* range 0..3 */ @@ -1444,15 +1443,15 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, * reported here. * * LOCKING: - * This routine holds the host_set lock while processing pending + * This routine holds the host lock while processing pending * interrupts. */ static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int hc, handled = 0, n_hcs; - void __iomem *mmio = host_set->mmio_base; + void __iomem *mmio = host->mmio_base; struct mv_host_priv *hpriv; u32 irq_stat; @@ -1465,18 +1464,18 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_NONE; } - n_hcs = mv_get_hc_count(host_set->ports[0]->flags); - spin_lock(&host_set->lock); + n_hcs = mv_get_hc_count(host->ports[0]->flags); + spin_lock(&host->lock); for (hc = 0; hc < n_hcs; hc++) { u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); if (relevant) { - mv_host_intr(host_set, relevant, hc); + mv_host_intr(host, relevant, hc); handled++; } } - hpriv = host_set->private_data; + hpriv = host->private_data; if (IS_60XX(hpriv)) { /* deal with the interrupt coalescing bits */ if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) { @@ -1491,12 +1490,12 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, readl(mmio + PCI_IRQ_CAUSE_OFS)); DPRINTK("All regs @ PCI error\n"); - mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); + mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev)); writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); handled++; } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); return IRQ_RETVAL(handled); } @@ -1528,7 +1527,7 @@ static unsigned int mv5_scr_offset(unsigned int sc_reg_in) static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in) { - void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); + void __iomem *mmio = mv5_phy_base(ap->host->mmio_base, ap->port_no); unsigned int ofs = mv5_scr_offset(sc_reg_in); if (ofs != 0xffffffffU) @@ -1539,7 +1538,7 @@ static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in) static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) { - void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); + void __iomem *mmio = mv5_phy_base(ap->host->mmio_base, ap->port_no); unsigned int ofs = mv5_scr_offset(sc_reg_in); if (ofs != 0xffffffffU) @@ -1904,8 +1903,8 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, static void mv_stop_and_reset(struct ata_port *ap) { - struct mv_host_priv *hpriv = ap->host_set->private_data; - void __iomem *mmio = ap->host_set->mmio_base; + struct mv_host_priv *hpriv = ap->host->private_data; + void __iomem *mmio = ap->host->mmio_base; mv_stop_dma(ap); @@ -1936,7 +1935,7 @@ static inline void __msleep(unsigned int msec, int can_sleep) static void __mv_phy_reset(struct ata_port *ap, int can_sleep) { struct mv_port_priv *pp = ap->private_data; - struct mv_host_priv *hpriv = ap->host_set->private_data; + struct mv_host_priv *hpriv = ap->host->private_data; void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; @@ -2034,7 +2033,7 @@ static void mv_phy_reset(struct ata_port *ap) * chip/bus, fail the command, and move on. * * LOCKING: - * This routine holds the host_set lock while failing the command. + * This routine holds the host lock while failing the command. */ static void mv_eng_timeout(struct ata_port *ap) { @@ -2043,18 +2042,17 @@ static void mv_eng_timeout(struct ata_port *ap) ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n"); DPRINTK("All regs @ start of eng_timeout\n"); - mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, - to_pci_dev(ap->host_set->dev)); + mv_dump_all_regs(ap->host->mmio_base, ap->port_no, + to_pci_dev(ap->host->dev)); qc = ata_qc_from_tag(ap, ap->active_tag); printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", - ap->host_set->mmio_base, ap, qc, qc->scsicmd, - &qc->scsicmd->cmnd); + ap->host->mmio_base, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd); - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(&ap->host->lock, flags); mv_err_intr(ap, 0); mv_stop_and_reset(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(&ap->host->lock, flags); WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); if (qc->flags & ATA_QCFLAG_ACTIVE) { @@ -2235,7 +2233,7 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, if (rc) goto done; - n_hc = mv_get_hc_count(probe_ent->host_flags); + n_hc = mv_get_hc_count(probe_ent->port_flags); probe_ent->n_ports = MV_PORTS_PER_HC * n_hc; for (port = 0; port < probe_ent->n_ports; port++) @@ -2388,7 +2386,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) memset(hpriv, 0, sizeof(*hpriv)); probe_ent->sht = mv_port_info[board_idx].sht; - probe_ent->host_flags = mv_port_info[board_idx].host_flags; + probe_ent->port_flags = mv_port_info[board_idx].flags; probe_ent->pio_mask = mv_port_info[board_idx].pio_mask; probe_ent->udma_mask = mv_port_info[board_idx].udma_mask; probe_ent->port_ops = mv_port_info[board_idx].port_ops; @@ -2446,7 +2444,7 @@ err_out: static int __init mv_init(void) { - return pci_module_init(&mv_pci_driver); + return pci_register_driver(&mv_pci_driver); } static void __exit mv_exit(void) diff --git a/drivers/scsi/sata_nv.c b/drivers/ata/sata_nv.c index 56da255..27c22fe 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -81,7 +81,7 @@ enum { }; static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void nv_ck804_host_stop(struct ata_host_set *host_set); +static void nv_ck804_host_stop(struct ata_host *host); static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, struct pt_regs *regs); static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, @@ -257,7 +257,7 @@ static struct ata_port_info nv_port_info[] = { /* generic */ { .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -266,7 +266,7 @@ static struct ata_port_info nv_port_info[] = { /* nforce2/3 */ { .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -275,7 +275,7 @@ static struct ata_port_info nv_port_info[] = { /* ck804 */ { .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -292,17 +292,17 @@ MODULE_VERSION(DRV_VERSION); static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int i; unsigned int handled = 0; unsigned long flags; - spin_lock_irqsave(&host_set->lock, flags); + spin_lock_irqsave(&host->lock, flags); - for (i = 0; i < host_set->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; - ap = host_set->ports[i]; + ap = host->ports[i]; if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; @@ -318,7 +318,7 @@ static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, } - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock_irqrestore(&host->lock, flags); return IRQ_RETVAL(handled); } @@ -354,12 +354,12 @@ static int nv_host_intr(struct ata_port *ap, u8 irq_stat) return 1; } -static irqreturn_t nv_do_interrupt(struct ata_host_set *host_set, u8 irq_stat) +static irqreturn_t nv_do_interrupt(struct ata_host *host, u8 irq_stat) { int i, handled = 0; - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; if (ap && !(ap->flags & ATA_FLAG_DISABLED)) handled += nv_host_intr(ap, irq_stat); @@ -373,14 +373,14 @@ static irqreturn_t nv_do_interrupt(struct ata_host_set *host_set, u8 irq_stat) static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; u8 irq_stat; irqreturn_t ret; - spin_lock(&host_set->lock); - irq_stat = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); - ret = nv_do_interrupt(host_set, irq_stat); - spin_unlock(&host_set->lock); + spin_lock(&host->lock); + irq_stat = inb(host->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); + ret = nv_do_interrupt(host, irq_stat); + spin_unlock(&host->lock); return ret; } @@ -388,14 +388,14 @@ static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; u8 irq_stat; irqreturn_t ret; - spin_lock(&host_set->lock); - irq_stat = readb(host_set->mmio_base + NV_INT_STATUS_CK804); - ret = nv_do_interrupt(host_set, irq_stat); - spin_unlock(&host_set->lock); + spin_lock(&host->lock); + irq_stat = readb(host->mmio_base + NV_INT_STATUS_CK804); + ret = nv_do_interrupt(host, irq_stat); + spin_unlock(&host->lock); return ret; } @@ -418,7 +418,7 @@ static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) static void nv_nf2_freeze(struct ata_port *ap) { - unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; + unsigned long scr_addr = ap->host->ports[0]->ioaddr.scr_addr; int shift = ap->port_no * NV_INT_PORT_SHIFT; u8 mask; @@ -429,7 +429,7 @@ static void nv_nf2_freeze(struct ata_port *ap) static void nv_nf2_thaw(struct ata_port *ap) { - unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; + unsigned long scr_addr = ap->host->ports[0]->ioaddr.scr_addr; int shift = ap->port_no * NV_INT_PORT_SHIFT; u8 mask; @@ -442,7 +442,7 @@ static void nv_nf2_thaw(struct ata_port *ap) static void nv_ck804_freeze(struct ata_port *ap) { - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; int shift = ap->port_no * NV_INT_PORT_SHIFT; u8 mask; @@ -453,7 +453,7 @@ static void nv_ck804_freeze(struct ata_port *ap) static void nv_ck804_thaw(struct ata_port *ap) { - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; int shift = ap->port_no * NV_INT_PORT_SHIFT; u8 mask; @@ -568,9 +568,9 @@ err_out: return rc; } -static void nv_ck804_host_stop(struct ata_host_set *host_set) +static void nv_ck804_host_stop(struct ata_host *host) { - struct pci_dev *pdev = to_pci_dev(host_set->dev); + struct pci_dev *pdev = to_pci_dev(host->dev); u8 regval; /* disable SATA space for CK804 */ @@ -578,12 +578,12 @@ static void nv_ck804_host_stop(struct ata_host_set *host_set) regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN; pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); - ata_pci_host_stop(host_set); + ata_pci_host_stop(host); } static int __init nv_init(void) { - return pci_module_init(&nv_pci_driver); + return pci_register_driver(&nv_pci_driver); } static void __exit nv_exit(void) diff --git a/drivers/scsi/sata_promise.c b/drivers/ata/sata_promise.c index 4776f4e..d627812 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -104,7 +104,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_irq_clear(struct ata_port *ap); static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc); -static void pdc_host_stop(struct ata_host_set *host_set); +static void pdc_host_stop(struct ata_host *host); static struct scsi_host_template pdc_ata_sht = { @@ -175,7 +175,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_2037x */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -185,7 +185,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_20319 */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -195,7 +195,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_20619 */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -205,7 +205,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_20771 */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -215,7 +215,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_2057x */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -225,7 +225,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_40518 */ { .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -292,7 +292,7 @@ static struct pci_driver pdc_ata_pci_driver = { static int pdc_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct pdc_port_priv *pp; int rc; @@ -326,7 +326,7 @@ err_out: static void pdc_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct pdc_port_priv *pp = ap->private_data; ap->private_data = NULL; @@ -336,11 +336,11 @@ static void pdc_port_stop(struct ata_port *ap) } -static void pdc_host_stop(struct ata_host_set *host_set) +static void pdc_host_stop(struct ata_host *host) { - struct pdc_host_priv *hp = host_set->private_data; + struct pdc_host_priv *hp = host->private_data; - ata_pci_host_stop(host_set); + ata_pci_host_stop(host); kfree(hp); } @@ -443,14 +443,14 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc) static void pdc_eng_timeout(struct ata_port *ap) { - struct ata_host_set *host_set = ap->host_set; + struct ata_host *host = ap->host; u8 drv_stat; struct ata_queued_cmd *qc; unsigned long flags; DPRINTK("ENTER\n"); - spin_lock_irqsave(&host_set->lock, flags); + spin_lock_irqsave(&host->lock, flags); qc = ata_qc_from_tag(ap, ap->active_tag); @@ -473,7 +473,7 @@ static void pdc_eng_timeout(struct ata_port *ap) break; } - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock_irqrestore(&host->lock, flags); ata_eh_qc_complete(qc); DPRINTK("EXIT\n"); } @@ -509,15 +509,15 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap, static void pdc_irq_clear(struct ata_port *ap) { - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; + struct ata_host *host = ap->host; + void __iomem *mmio = host->mmio_base; readl(mmio + PDC_INT_SEQMASK); } static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; struct ata_port *ap; u32 mask = 0; unsigned int i, tmp; @@ -526,12 +526,12 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r VPRINTK("ENTER\n"); - if (!host_set || !host_set->mmio_base) { + if (!host || !host->mmio_base) { VPRINTK("QUICK EXIT\n"); return IRQ_NONE; } - mmio_base = host_set->mmio_base; + mmio_base = host->mmio_base; /* reading should also clear interrupts */ mask = readl(mmio_base + PDC_INT_SEQMASK); @@ -541,7 +541,7 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r return IRQ_NONE; } - spin_lock(&host_set->lock); + spin_lock(&host->lock); mask &= 0xffff; /* only 16 tags possible */ if (!mask) { @@ -551,9 +551,9 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r writel(mask, mmio_base + PDC_INT_SEQMASK); - for (i = 0; i < host_set->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { VPRINTK("port %u\n", i); - ap = host_set->ports[i]; + ap = host->ports[i]; tmp = mask & (1 << (i + 1)); if (tmp && ap && !(ap->flags & ATA_FLAG_DISABLED)) { @@ -568,7 +568,7 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r VPRINTK("EXIT\n"); done_irq: - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); return IRQ_RETVAL(handled); } @@ -581,8 +581,8 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc) VPRINTK("ENTER, ap %p\n", ap); - writel(0x00000001, ap->host_set->mmio_base + (seq * 4)); - readl(ap->host_set->mmio_base + (seq * 4)); /* flush */ + writel(0x00000001, ap->host->mmio_base + (seq * 4)); + readl(ap->host->mmio_base + (seq * 4)); /* flush */ pp->pkt[2] = seq; wmb(); /* flush PRD, pkt writes */ @@ -743,7 +743,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->private_data = hp; probe_ent->sht = pdc_port_info[board_idx].sht; - probe_ent->host_flags = pdc_port_info[board_idx].host_flags; + probe_ent->port_flags = pdc_port_info[board_idx].flags; probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask; probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask; @@ -824,7 +824,7 @@ err_out: static int __init pdc_ata_init(void) { - return pci_module_init(&pdc_ata_pci_driver); + return pci_register_driver(&pdc_ata_pci_driver); } diff --git a/drivers/scsi/sata_promise.h b/drivers/ata/sata_promise.h index 6ee5e190..6ee5e190 100644 --- a/drivers/scsi/sata_promise.h +++ b/drivers/ata/sata_promise.h diff --git a/drivers/scsi/sata_qstor.c b/drivers/ata/sata_qstor.c index d374c1db..fa29dfe 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -116,7 +116,7 @@ static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); static irqreturn_t qs_intr (int irq, void *dev_instance, struct pt_regs *regs); static int qs_port_start(struct ata_port *ap); -static void qs_host_stop(struct ata_host_set *host_set); +static void qs_host_stop(struct ata_host *host); static void qs_port_stop(struct ata_port *ap); static void qs_phy_reset(struct ata_port *ap); static void qs_qc_prep(struct ata_queued_cmd *qc); @@ -174,7 +174,7 @@ static const struct ata_port_info qs_port_info[] = { /* board_2068_idx */ { .sht = &qs_ata_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | //FIXME ATA_FLAG_SRST | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, @@ -220,7 +220,7 @@ static void qs_irq_clear(struct ata_port *ap) static inline void qs_enter_reg_mode(struct ata_port *ap) { - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); + u8 __iomem *chan = ap->host->mmio_base + (ap->port_no * 0x4000); writeb(QS_CTR0_REG, chan + QS_CCT_CTR0); readb(chan + QS_CCT_CTR0); /* flush */ @@ -228,7 +228,7 @@ static inline void qs_enter_reg_mode(struct ata_port *ap) static inline void qs_reset_channel_logic(struct ata_port *ap) { - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); + u8 __iomem *chan = ap->host->mmio_base + (ap->port_no * 0x4000); writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1); readb(chan + QS_CCT_CTR0); /* flush */ @@ -342,7 +342,7 @@ static void qs_qc_prep(struct ata_queued_cmd *qc) static inline void qs_packet_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); + u8 __iomem *chan = ap->host->mmio_base + (ap->port_no * 0x4000); VPRINTK("ENTER, ap %p\n", ap); @@ -375,11 +375,11 @@ static unsigned int qs_qc_issue(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } -static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) +static inline unsigned int qs_intr_pkt(struct ata_host *host) { unsigned int handled = 0; u8 sFFE; - u8 __iomem *mmio_base = host_set->mmio_base; + u8 __iomem *mmio_base = host->mmio_base; do { u32 sff0 = readl(mmio_base + QS_HST_SFF); @@ -391,7 +391,7 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) u8 sDST = sff0 >> 16; /* dev status */ u8 sHST = sff1 & 0x3f; /* host status */ unsigned int port_no = (sff1 >> 8) & 0x03; - struct ata_port *ap = host_set->ports[port_no]; + struct ata_port *ap = host->ports[port_no]; DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n", sff1, sff0, port_no, sHST, sDST); @@ -421,13 +421,13 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) return handled; } -static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) +static inline unsigned int qs_intr_mmio(struct ata_host *host) { unsigned int handled = 0, port_no; - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + for (port_no = 0; port_no < host->n_ports; ++port_no) { struct ata_port *ap; - ap = host_set->ports[port_no]; + ap = host->ports[port_no]; if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; @@ -457,14 +457,14 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) static irqreturn_t qs_intr(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int handled = 0; VPRINTK("ENTER\n"); - spin_lock(&host_set->lock); - handled = qs_intr_pkt(host_set) | qs_intr_mmio(host_set); - spin_unlock(&host_set->lock); + spin_lock(&host->lock); + handled = qs_intr_pkt(host) | qs_intr_mmio(host); + spin_unlock(&host->lock); VPRINTK("EXIT\n"); @@ -491,9 +491,9 @@ static void qs_ata_setup_port(struct ata_ioports *port, unsigned long base) static int qs_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct qs_port_priv *pp; - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; void __iomem *chan = mmio_base + (ap->port_no * 0x4000); u64 addr; int rc; @@ -530,7 +530,7 @@ err_out: static void qs_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct qs_port_priv *pp = ap->private_data; if (pp != NULL) { @@ -543,10 +543,10 @@ static void qs_port_stop(struct ata_port *ap) ata_port_stop(ap); } -static void qs_host_stop(struct ata_host_set *host_set) +static void qs_host_stop(struct ata_host *host) { - void __iomem *mmio_base = host_set->mmio_base; - struct pci_dev *pdev = to_pci_dev(host_set->dev); + void __iomem *mmio_base = host->mmio_base; + struct pci_dev *pdev = to_pci_dev(host->dev); writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ @@ -673,7 +673,7 @@ static int qs_ata_init_one(struct pci_dev *pdev, INIT_LIST_HEAD(&probe_ent->node); probe_ent->sht = qs_port_info[board_idx].sht; - probe_ent->host_flags = qs_port_info[board_idx].host_flags; + probe_ent->port_flags = qs_port_info[board_idx].flags; probe_ent->pio_mask = qs_port_info[board_idx].pio_mask; probe_ent->mwdma_mask = qs_port_info[board_idx].mwdma_mask; probe_ent->udma_mask = qs_port_info[board_idx].udma_mask; @@ -712,7 +712,7 @@ err_out: static int __init qs_ata_init(void) { - return pci_module_init(&qs_ata_pci_driver); + return pci_register_driver(&qs_ata_pci_driver); } static void __exit qs_ata_exit(void) diff --git a/drivers/scsi/sata_sil.c b/drivers/ata/sata_sil.c index d0a8507..c63dbab 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -56,7 +56,7 @@ enum { SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), SIL_FLAG_MOD15WRITE = (1 << 30), - SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME, /* @@ -109,7 +109,9 @@ enum { }; static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM static int sil_pci_device_resume(struct pci_dev *pdev); +#endif static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); @@ -141,12 +143,8 @@ static const struct sil_drivelist { { "ST330013AS", SIL_QUIRK_MOD15WRITE }, { "ST340017AS", SIL_QUIRK_MOD15WRITE }, { "ST360015AS", SIL_QUIRK_MOD15WRITE }, - { "ST380013AS", SIL_QUIRK_MOD15WRITE }, { "ST380023AS", SIL_QUIRK_MOD15WRITE }, { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, - { "ST3160023AS", SIL_QUIRK_MOD15WRITE }, - { "ST3120026AS", SIL_QUIRK_MOD15WRITE }, - { "ST3200822AS", SIL_QUIRK_MOD15WRITE }, { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, @@ -161,8 +159,10 @@ static struct pci_driver sil_pci_driver = { .id_table = sil_pci_tbl, .probe = sil_init_one, .remove = ata_pci_remove_one, +#ifdef CONFIG_PM .suspend = ata_pci_device_suspend, .resume = sil_pci_device_resume, +#endif }; static struct scsi_host_template sil_sht = { @@ -218,7 +218,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE, + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -227,7 +227,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3112_no_sata_irq */ { .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE | + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | SIL_FLAG_NO_SATA_IRQ, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -237,7 +237,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3512 */ { .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -246,7 +246,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3114 */ { .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -295,10 +295,9 @@ static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) static void sil_post_set_mode (struct ata_port *ap) { - struct ata_host_set *host_set = ap->host_set; + struct ata_host *host = ap->host; struct ata_device *dev; - void __iomem *addr = - host_set->mmio_base + sil_port[ap->port_no].xfer_mode; + void __iomem *addr = host->mmio_base + sil_port[ap->port_no].xfer_mode; u32 tmp, dev_mode[2]; unsigned int i; @@ -440,15 +439,15 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) static irqreturn_t sil_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; - void __iomem *mmio_base = host_set->mmio_base; + struct ata_host *host = dev_instance; + void __iomem *mmio_base = host->mmio_base; int handled = 0; int i; - spin_lock(&host_set->lock); + spin_lock(&host->lock); - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) @@ -466,14 +465,14 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance, handled = 1; } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); return IRQ_RETVAL(handled); } static void sil_freeze(struct ata_port *ap) { - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; u32 tmp; /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ @@ -488,7 +487,7 @@ static void sil_freeze(struct ata_port *ap) static void sil_thaw(struct ata_port *ap) { - void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *mmio_base = ap->host->mmio_base; u32 tmp; /* clear IRQ */ @@ -567,7 +566,7 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) } static void sil_init_controller(struct pci_dev *pdev, - int n_ports, unsigned long host_flags, + int n_ports, unsigned long port_flags, void __iomem *mmio_base) { u8 cls; @@ -587,7 +586,7 @@ static void sil_init_controller(struct pci_dev *pdev, "cache line size not set. Driver may not function\n"); /* Apply R_ERR on DMA activate FIS errata workaround */ - if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { + if (port_flags & SIL_FLAG_RERR_ON_DMA_ACT) { int cnt; for (i = 0, cnt = 0; i < n_ports; i++) { @@ -658,7 +657,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask; probe_ent->irq = pdev->irq; probe_ent->irq_flags = IRQF_SHARED; - probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags; + probe_ent->port_flags = sil_port_info[ent->driver_data].flags; mmio_base = pci_iomap(pdev, 5, 0); if (mmio_base == NULL) { @@ -679,7 +678,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) ata_std_ports(&probe_ent->port[i]); } - sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + sil_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags, mmio_base); pci_set_master(pdev); @@ -700,21 +699,23 @@ err_out: return rc; } +#ifdef CONFIG_PM static int sil_pci_device_resume(struct pci_dev *pdev) { - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + struct ata_host *host = dev_get_drvdata(&pdev->dev); ata_pci_device_do_resume(pdev); - sil_init_controller(pdev, host_set->n_ports, host_set->ports[0]->flags, - host_set->mmio_base); - ata_host_set_resume(host_set); + sil_init_controller(pdev, host->n_ports, host->ports[0]->flags, + host->mmio_base); + ata_host_resume(host); return 0; } +#endif static int __init sil_init(void) { - return pci_module_init(&sil_pci_driver); + return pci_register_driver(&sil_pci_driver); } static void __exit sil_exit(void) diff --git a/drivers/scsi/sata_sil24.c b/drivers/ata/sata_sil24.c index 3f368c7..39cb07b 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -316,7 +316,7 @@ struct sil24_port_priv { struct ata_taskfile tf; /* Cached taskfile registers */ }; -/* ap->host_set->private_data */ +/* ap->host->private_data */ struct sil24_host_priv { void __iomem *host_base; /* global controller control (128 bytes @BAR0) */ void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */ @@ -337,9 +337,11 @@ static void sil24_error_handler(struct ata_port *ap); static void sil24_post_internal_cmd(struct ata_queued_cmd *qc); static int sil24_port_start(struct ata_port *ap); static void sil24_port_stop(struct ata_port *ap); -static void sil24_host_stop(struct ata_host_set *host_set); +static void sil24_host_stop(struct ata_host *host); static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM static int sil24_pci_device_resume(struct pci_dev *pdev); +#endif static const struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, @@ -355,8 +357,10 @@ static struct pci_driver sil24_pci_driver = { .id_table = sil24_pci_tbl, .probe = sil24_init_one, .remove = ata_pci_remove_one, /* safe? */ +#ifdef CONFIG_PM .suspend = ata_pci_device_suspend, .resume = sil24_pci_device_resume, +#endif }; static struct scsi_host_template sil24_sht = { @@ -411,7 +415,7 @@ static const struct ata_port_operations sil24_ops = { }; /* - * Use bits 30-31 of host_flags to encode available port numbers. + * Use bits 30-31 of port_flags to encode available port numbers. * Current maxium is 4. */ #define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30) @@ -421,7 +425,7 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3124 */ { .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | + .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | SIL24_FLAG_PCIX_IRQ_WOC, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -431,7 +435,7 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3132 */ { .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), + .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -440,7 +444,7 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3131/sil_3531 */ { .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), + .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -867,8 +871,8 @@ static inline void sil24_host_intr(struct ata_port *ap) static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; - struct sil24_host_priv *hpriv = host_set->private_data; + struct ata_host *host = dev_instance; + struct sil24_host_priv *hpriv = host->private_data; unsigned handled = 0; u32 status; int i; @@ -884,20 +888,20 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * if (!(status & IRQ_STAT_4PORTS)) goto out; - spin_lock(&host_set->lock); + spin_lock(&host->lock); - for (i = 0; i < host_set->n_ports; i++) + for (i = 0; i < host->n_ports; i++) if (status & (1 << i)) { - struct ata_port *ap = host_set->ports[i]; + struct ata_port *ap = host->ports[i]; if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { - sil24_host_intr(host_set->ports[i]); + sil24_host_intr(host->ports[i]); handled++; } else printk(KERN_ERR DRV_NAME ": interrupt from disabled port %d\n", i); } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); out: return IRQ_RETVAL(handled); } @@ -937,7 +941,7 @@ static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *de static int sil24_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct sil24_port_priv *pp; union sil24_cmd_block *cb; size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS; @@ -976,7 +980,7 @@ err_out: static void sil24_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct sil24_port_priv *pp = ap->private_data; sil24_cblk_free(pp, dev); @@ -984,10 +988,10 @@ static void sil24_port_stop(struct ata_port *ap) kfree(pp); } -static void sil24_host_stop(struct ata_host_set *host_set) +static void sil24_host_stop(struct ata_host *host) { - struct sil24_host_priv *hpriv = host_set->private_data; - struct pci_dev *pdev = to_pci_dev(host_set->dev); + struct sil24_host_priv *hpriv = host->private_data; + struct pci_dev *pdev = to_pci_dev(host->dev); pci_iounmap(pdev, hpriv->host_base); pci_iounmap(pdev, hpriv->port_base); @@ -995,7 +999,7 @@ static void sil24_host_stop(struct ata_host_set *host_set) } static void sil24_init_controller(struct pci_dev *pdev, int n_ports, - unsigned long host_flags, + unsigned long port_flags, void __iomem *host_base, void __iomem *port_base) { @@ -1028,7 +1032,7 @@ static void sil24_init_controller(struct pci_dev *pdev, int n_ports, } /* Configure IRQ WoC */ - if (host_flags & SIL24_FLAG_PCIX_IRQ_WOC) + if (port_flags & SIL24_FLAG_PCIX_IRQ_WOC) writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); else writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); @@ -1097,12 +1101,12 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) INIT_LIST_HEAD(&probe_ent->node); probe_ent->sht = pinfo->sht; - probe_ent->host_flags = pinfo->host_flags; + probe_ent->port_flags = pinfo->flags; probe_ent->pio_mask = pinfo->pio_mask; probe_ent->mwdma_mask = pinfo->mwdma_mask; probe_ent->udma_mask = pinfo->udma_mask; probe_ent->port_ops = pinfo->port_ops; - probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags); + probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->flags); probe_ent->irq = pdev->irq; probe_ent->irq_flags = IRQF_SHARED; @@ -1140,14 +1144,14 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } /* Apply workaround for completion IRQ loss on PCI-X errata */ - if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) { + if (probe_ent->port_flags & SIL24_FLAG_PCIX_IRQ_WOC) { tmp = readl(host_base + HOST_CTRL); if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL)) dev_printk(KERN_INFO, &pdev->dev, "Applying completion IRQ loss on PCI-X " "errata fix\n"); else - probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; + probe_ent->port_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; } for (i = 0; i < probe_ent->n_ports; i++) { @@ -1160,7 +1164,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ata_std_ports(&probe_ent->port[i]); } - sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags, host_base, port_base); pci_set_master(pdev); @@ -1184,28 +1188,29 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } +#ifdef CONFIG_PM static int sil24_pci_device_resume(struct pci_dev *pdev) { - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - struct sil24_host_priv *hpriv = host_set->private_data; + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct sil24_host_priv *hpriv = host->private_data; ata_pci_device_do_resume(pdev); if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) writel(HOST_CTRL_GLOBAL_RST, hpriv->host_base + HOST_CTRL); - sil24_init_controller(pdev, host_set->n_ports, - host_set->ports[0]->flags, + sil24_init_controller(pdev, host->n_ports, host->ports[0]->flags, hpriv->host_base, hpriv->port_base); - ata_host_set_resume(host_set); + ata_host_resume(host); return 0; } +#endif static int __init sil24_init(void) { - return pci_module_init(&sil24_pci_driver); + return pci_register_driver(&sil24_pci_driver); } static void __exit sil24_exit(void) diff --git a/drivers/scsi/sata_sis.c b/drivers/ata/sata_sis.c index ee6b5df..9b17375 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -128,7 +128,7 @@ static const struct ata_port_operations sis_ops = { static struct ata_port_info sis_port_info = { .sht = &sis_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, .mwdma_mask = 0x7, .udma_mask = 0x7f, @@ -158,7 +158,7 @@ static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device); u32 val, val2 = 0; u8 pmr; @@ -178,7 +178,7 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device); u8 pmr; @@ -195,7 +195,7 @@ static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 val, val2 = 0; u8 pmr; @@ -217,7 +217,7 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 pmr; if (sc_reg > SCR_CONTROL) @@ -275,17 +275,17 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) /* check and see if the SCRs are in IO space or PCI cfg space */ pci_read_config_dword(pdev, SIS_GENCTL, &genctl); if ((genctl & GENCTL_IOMAPPED_SCR) == 0) - probe_ent->host_flags |= SIS_FLAG_CFGSCR; + probe_ent->port_flags |= SIS_FLAG_CFGSCR; /* if hardware thinks SCRs are in IO space, but there are * no IO resources assigned, change to PCI cfg space. */ - if ((!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) && + if ((!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) && ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) || (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) { genctl &= ~GENCTL_IOMAPPED_SCR; pci_write_config_dword(pdev, SIS_GENCTL, genctl); - probe_ent->host_flags |= SIS_FLAG_CFGSCR; + probe_ent->port_flags |= SIS_FLAG_CFGSCR; } pci_read_config_byte(pdev, SIS_PMR, &pmr); @@ -306,7 +306,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) port2_start = 0x20; } - if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) { + if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) { probe_ent->port[0].scr_addr = pci_resource_start(pdev, SIS_SCR_PCI_BAR); probe_ent->port[1].scr_addr = @@ -334,7 +334,7 @@ err_out: static int __init sis_init(void) { - return pci_module_init(&sis_pci_driver); + return pci_register_driver(&sis_pci_driver); } static void __exit sis_exit(void) diff --git a/drivers/scsi/sata_svw.c b/drivers/ata/sata_svw.c index 7d08580..2a7e349 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -169,7 +169,7 @@ static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc) @@ -199,7 +199,7 @@ static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc) * @qc: Info associated with this ATA transaction. * * LOCKING: - * spin_lock_irqsave(host_set lock) + * spin_lock_irqsave(host lock) */ static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc) @@ -261,12 +261,12 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, return 0; /* Find the OF node for the PCI device proper */ - np = pci_device_to_OF_node(to_pci_dev(ap->host_set->dev)); + np = pci_device_to_OF_node(to_pci_dev(ap->host->dev)); if (np == NULL) return 0; /* Match it to a port node */ - index = (ap == ap->host_set->ports[0]) ? 0 : 1; + index = (ap == ap->host->ports[0]) ? 0 : 1; for (np = np->child; np != NULL; np = np->sibling) { u32 *reg = (u32 *)get_property(np, "reg", NULL); if (!reg) @@ -423,7 +423,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); probe_ent->sht = &k2_sata_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; probe_ent->port_ops = &k2_sata_ops; probe_ent->n_ports = 4; @@ -488,7 +488,7 @@ static struct pci_driver k2_sata_pci_driver = { static int __init k2_sata_init(void) { - return pci_module_init(&k2_sata_pci_driver); + return pci_register_driver(&k2_sata_pci_driver); } diff --git a/drivers/scsi/sata_sx4.c b/drivers/ata/sata_sx4.c index ccc8cad..091867e 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -160,7 +160,7 @@ static void pdc_port_stop(struct ata_port *ap); static void pdc20621_qc_prep(struct ata_queued_cmd *qc); static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); -static void pdc20621_host_stop(struct ata_host_set *host_set); +static void pdc20621_host_stop(struct ata_host *host); static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe); static int pdc20621_detect_dimm(struct ata_probe_ent *pe); static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, @@ -218,7 +218,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_20621 */ { .sht = &pdc_sata_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING, .pio_mask = 0x1f, /* pio0-4 */ @@ -244,21 +244,21 @@ static struct pci_driver pdc_sata_pci_driver = { }; -static void pdc20621_host_stop(struct ata_host_set *host_set) +static void pdc20621_host_stop(struct ata_host *host) { - struct pci_dev *pdev = to_pci_dev(host_set->dev); - struct pdc_host_priv *hpriv = host_set->private_data; + struct pci_dev *pdev = to_pci_dev(host->dev); + struct pdc_host_priv *hpriv = host->private_data; void __iomem *dimm_mmio = hpriv->dimm_mmio; pci_iounmap(pdev, dimm_mmio); kfree(hpriv); - pci_iounmap(pdev, host_set->mmio_base); + pci_iounmap(pdev, host->mmio_base); } static int pdc_port_start(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct pdc_port_priv *pp; int rc; @@ -293,7 +293,7 @@ err_out: static void pdc_port_stop(struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->host->dev; struct pdc_port_priv *pp = ap->private_data; ap->private_data = NULL; @@ -453,8 +453,8 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc) struct scatterlist *sg; struct ata_port *ap = qc->ap; struct pdc_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - struct pdc_host_priv *hpriv = ap->host_set->private_data; + void __iomem *mmio = ap->host->mmio_base; + struct pdc_host_priv *hpriv = ap->host->private_data; void __iomem *dimm_mmio = hpriv->dimm_mmio; unsigned int portno = ap->port_no; unsigned int i, idx, total_len = 0, sgt_len; @@ -514,8 +514,8 @@ static void pdc20621_nodata_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct pdc_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - struct pdc_host_priv *hpriv = ap->host_set->private_data; + void __iomem *mmio = ap->host->mmio_base; + struct pdc_host_priv *hpriv = ap->host->private_data; void __iomem *dimm_mmio = hpriv->dimm_mmio; unsigned int portno = ap->port_no; unsigned int i; @@ -565,8 +565,8 @@ static void __pdc20621_push_hdma(struct ata_queued_cmd *qc, u32 pkt_ofs) { struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; + struct ata_host *host = ap->host; + void __iomem *mmio = host->mmio_base; /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; @@ -583,7 +583,7 @@ static void pdc20621_push_hdma(struct ata_queued_cmd *qc, u32 pkt_ofs) { struct ata_port *ap = qc->ap; - struct pdc_host_priv *pp = ap->host_set->private_data; + struct pdc_host_priv *pp = ap->host->private_data; unsigned int idx = pp->hdma_prod & PDC_HDMA_Q_MASK; if (!pp->doing_hdma) { @@ -601,7 +601,7 @@ static void pdc20621_push_hdma(struct ata_queued_cmd *qc, static void pdc20621_pop_hdma(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - struct pdc_host_priv *pp = ap->host_set->private_data; + struct pdc_host_priv *pp = ap->host->private_data; unsigned int idx = pp->hdma_cons & PDC_HDMA_Q_MASK; /* if nothing on queue, we're done */ @@ -620,7 +620,7 @@ static void pdc20621_dump_hdma(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; unsigned int port_no = ap->port_no; - struct pdc_host_priv *hpriv = ap->host_set->private_data; + struct pdc_host_priv *hpriv = ap->host->private_data; void *dimm_mmio = hpriv->dimm_mmio; dimm_mmio += (port_no * PDC_DIMM_WINDOW_STEP); @@ -638,9 +638,9 @@ static inline void pdc20621_dump_hdma(struct ata_queued_cmd *qc) { } static void pdc20621_packet_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; + struct ata_host *host = ap->host; unsigned int port_no = ap->port_no; - void __iomem *mmio = host_set->mmio_base; + void __iomem *mmio = host->mmio_base; unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); u8 seq = (u8) (port_no + 1); unsigned int port_ofs; @@ -781,8 +781,8 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, static void pdc20621_irq_clear(struct ata_port *ap) { - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; + struct ata_host *host = ap->host; + void __iomem *mmio = host->mmio_base; mmio += PDC_CHIP0_OFS; @@ -791,7 +791,7 @@ static void pdc20621_irq_clear(struct ata_port *ap) static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; struct ata_port *ap; u32 mask = 0; unsigned int i, tmp, port_no; @@ -800,12 +800,12 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re VPRINTK("ENTER\n"); - if (!host_set || !host_set->mmio_base) { + if (!host || !host->mmio_base) { VPRINTK("QUICK EXIT\n"); return IRQ_NONE; } - mmio_base = host_set->mmio_base; + mmio_base = host->mmio_base; /* reading should also clear interrupts */ mmio_base += PDC_CHIP0_OFS; @@ -822,16 +822,16 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re return IRQ_NONE; } - spin_lock(&host_set->lock); + spin_lock(&host->lock); for (i = 1; i < 9; i++) { port_no = i - 1; if (port_no > 3) port_no -= 4; - if (port_no >= host_set->n_ports) + if (port_no >= host->n_ports) ap = NULL; else - ap = host_set->ports[port_no]; + ap = host->ports[port_no]; tmp = mask & (1 << i); VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp); if (tmp && ap && @@ -845,7 +845,7 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re } } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); VPRINTK("mask == 0x%x\n", mask); @@ -857,13 +857,13 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re static void pdc_eng_timeout(struct ata_port *ap) { u8 drv_stat; - struct ata_host_set *host_set = ap->host_set; + struct ata_host *host = ap->host; struct ata_queued_cmd *qc; unsigned long flags; DPRINTK("ENTER\n"); - spin_lock_irqsave(&host_set->lock, flags); + spin_lock_irqsave(&host->lock, flags); qc = ata_qc_from_tag(ap, ap->active_tag); @@ -885,7 +885,7 @@ static void pdc_eng_timeout(struct ata_port *ap) break; } - spin_unlock_irqrestore(&host_set->lock, flags); + spin_unlock_irqrestore(&host->lock, flags); ata_eh_qc_complete(qc); DPRINTK("EXIT\n"); } @@ -1429,7 +1429,7 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * hpriv->dimm_mmio = dimm_mmio; probe_ent->sht = pdc_port_info[board_idx].sht; - probe_ent->host_flags = pdc_port_info[board_idx].host_flags; + probe_ent->port_flags = pdc_port_info[board_idx].flags; probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask; probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask; @@ -1482,7 +1482,7 @@ err_out: static int __init pdc_sata_init(void) { - return pci_module_init(&pdc_sata_pci_driver); + return pci_register_driver(&pdc_sata_pci_driver); } diff --git a/drivers/scsi/sata_uli.c b/drivers/ata/sata_uli.c index 33cdb48..8fc6e80 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -128,7 +128,7 @@ static const struct ata_port_operations uli_ops = { static struct ata_port_info uli_port_info = { .sht = &uli_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &uli_ops, @@ -143,13 +143,13 @@ MODULE_VERSION(DRV_VERSION); static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) { - struct uli_priv *hpriv = ap->host_set->private_data; + struct uli_priv *hpriv = ap->host->private_data; return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg); } static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg); u32 val; @@ -159,7 +159,7 @@ static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) static void uli_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned int cfg_addr = get_scr_cfg_addr(ap, scr); pci_write_config_dword(pdev, cfg_addr, val); @@ -287,7 +287,7 @@ err_out: static int __init uli_init(void) { - return pci_module_init(&uli_pci_driver); + return pci_register_driver(&uli_pci_driver); } static void __exit uli_exit(void) diff --git a/drivers/scsi/sata_via.c b/drivers/ata/sata_via.c index a3727af..7f087ae 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/ata/sata_via.c @@ -176,7 +176,7 @@ static const struct ata_port_operations vt6421_sata_ops = { static struct ata_port_info vt6420_port_info = { .sht = &svia_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, .mwdma_mask = 0x07, .udma_mask = 0x7f, @@ -346,7 +346,7 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) INIT_LIST_HEAD(&probe_ent->node); probe_ent->sht = &svia_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY; + probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY; probe_ent->port_ops = &vt6421_sata_ops; probe_ent->n_ports = N_PORTS; probe_ent->irq = pdev->irq; @@ -489,7 +489,7 @@ err_out: static int __init svia_init(void) { - return pci_module_init(&svia_pci_driver); + return pci_register_driver(&svia_pci_driver); } static void __exit svia_exit(void) diff --git a/drivers/scsi/sata_vsc.c b/drivers/ata/sata_vsc.c index ad37871..d0d92f3 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -123,7 +123,7 @@ static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) void __iomem *mask_addr; u8 mask; - mask_addr = ap->host_set->mmio_base + + mask_addr = ap->host->mmio_base + VSC_SATA_INT_MASK_OFFSET + ap->port_no; mask = readb(mask_addr); if (ctl & ATA_NIEN) @@ -206,20 +206,20 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) { - struct ata_host_set *host_set = dev_instance; + struct ata_host *host = dev_instance; unsigned int i; unsigned int handled = 0; u32 int_status; - spin_lock(&host_set->lock); + spin_lock(&host->lock); - int_status = readl(host_set->mmio_base + VSC_SATA_INT_STAT_OFFSET); + int_status = readl(host->mmio_base + VSC_SATA_INT_STAT_OFFSET); - for (i = 0; i < host_set->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { if (int_status & ((u32) 0xFF << (8 * i))) { struct ata_port *ap; - ap = host_set->ports[i]; + ap = host->ports[i]; if (is_vsc_sata_int_err(i, int_status)) { u32 err_status; @@ -259,7 +259,7 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, } } - spin_unlock(&host_set->lock); + spin_unlock(&host->lock); return IRQ_RETVAL(handled); } @@ -395,7 +395,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80); probe_ent->sht = &vsc_sata_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; probe_ent->port_ops = &vsc_sata_ops; probe_ent->n_ports = 4; @@ -462,7 +462,7 @@ static struct pci_driver vsc_sata_pci_driver = { static int __init vsc_sata_init(void) { - return pci_module_init(&vsc_sata_pci_driver); + return pci_register_driver(&vsc_sata_pci_driver); } diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 17e709e..def78a2 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1210,7 +1210,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus ); -#if defined(CONFIG_SCSI_SATA) || defined(CONFIG_SCSI_SATA_MODULE) +#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) /* * If we are using libata we can drive this chip properly but must @@ -1300,7 +1300,7 @@ static int __init combined_setup(char *str) } __setup("combined_mode=", combined_setup); -#ifdef CONFIG_SCSI_SATA_INTEL_COMBINED +#ifdef CONFIG_SATA_INTEL_COMBINED static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev) { u8 prog, comb, tmp; @@ -1393,7 +1393,7 @@ static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev) request_region(0x170, 8, "libata"); /* port 1 */ } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_intel_ide_combined ); -#endif /* CONFIG_SCSI_SATA_INTEL_COMBINED */ +#endif /* CONFIG_SATA_INTEL_COMBINED */ int pcie_mch_quirk; diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 96a81cd..2df4d15 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -471,67 +471,6 @@ config SCSI_IN2000 source "drivers/scsi/megaraid/Kconfig.megaraid" -config SCSI_SATA - tristate "Serial ATA (SATA) support" - depends on SCSI - help - This driver family supports Serial ATA host controllers - and devices. - - If unsure, say N. - -config SCSI_SATA_AHCI - tristate "AHCI SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for AHCI Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SVW - tristate "ServerWorks Frodo / Apple K2 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Broadcom/Serverworks/Apple K2 - SATA support. - - If unsure, say N. - -config SCSI_ATA_PIIX - tristate "Intel PIIX/ICH SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for ICH5/6/7/8 Serial ATA. - If PATA support was enabled previously, this enables - support for select Intel PIIX/ICH PATA host controllers. - - If unsure, say N. - -config SCSI_SATA_MV - tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for the Marvell Serial ATA family. - Currently supports 88SX[56]0[48][01] chips. - - If unsure, say N. - -config SCSI_SATA_NV - tristate "NVIDIA SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for NVIDIA Serial ATA. - - If unsure, say N. - -config SCSI_PDC_ADMA - tristate "Pacific Digital ADMA support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital ADMA controllers - - If unsure, say N. - config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx Controller support" depends on SCSI && PCI @@ -542,83 +481,6 @@ config SCSI_HPTIOP To compile this driver as a module, choose M here; the module will be called hptiop. If unsure, say N. -config SCSI_SATA_QSTOR - tristate "Pacific Digital SATA QStor support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital Serial ATA QStor. - - If unsure, say N. - -config SCSI_SATA_PROMISE - tristate "Promise SATA TX2/TX4 support" - depends on SCSI_SATA && PCI - help - This option enables support for Promise Serial ATA TX2/TX4. - - If unsure, say N. - -config SCSI_SATA_SX4 - tristate "Promise SATA SX4 support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Promise Serial ATA SX4. - - If unsure, say N. - -config SCSI_SATA_SIL - tristate "Silicon Image SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIL24 - tristate "Silicon Image 3124/3132 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image 3124/3132 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIS - tristate "SiS 964/180 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for SiS Serial ATA 964/180. - - If unsure, say N. - -config SCSI_SATA_ULI - tristate "ULi Electronics SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for ULi Electronics SATA. - - If unsure, say N. - -config SCSI_SATA_VIA - tristate "VIA SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for VIA Serial ATA. - - If unsure, say N. - -config SCSI_SATA_VITESSE - tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_INTEL_COMBINED - bool - depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX) - default y - config SCSI_BUSLOGIC tristate "BusLogic SCSI support" depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index ebd0cf0..b678f95 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -122,21 +122,6 @@ obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o obj-$(CONFIG_SCSI_NSP32) += nsp32.o obj-$(CONFIG_SCSI_IPR) += ipr.o obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/ -obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o -obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o -obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o -obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o -obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o -obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o -obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o -obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o -obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o -obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o -obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o -obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o -obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o -obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o -obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o obj-$(CONFIG_ARM) += arm/ @@ -166,7 +151,6 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) zalon7xx-objs := zalon.o ncr53c8xx.o NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o -libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o # Files generated that shall be removed upon make clean |
