summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpu/drm/radeon/evergreen.c2
-rw-r--r--drivers/gpu/drm/radeon/ni.c4
-rw-r--r--drivers/gpu/drm/radeon/si.c6
-rw-r--r--drivers/i2c/busses/i2c-nuc900.c2
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c4
-rw-r--r--drivers/mtd/maps/plat-ram.c2
-rw-r--r--drivers/mtd/nand/s3c2410.c2
-rw-r--r--drivers/net/ethernet/8390/ax88796.c2
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h2
-rw-r--r--drivers/net/sungem_phy.c8
-rw-r--r--drivers/rtc/rtc-isl1208.c2
-rw-r--r--drivers/rtc/rtc-s3c.c2
-rw-r--r--drivers/s390/block/dasd_devmap.c2
-rw-r--r--drivers/usb/storage/realtek_cr.c2
-rw-r--r--drivers/watchdog/booke_wdt.c2
15 files changed, 22 insertions, 22 deletions
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 14313ad..4250949 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1648,7 +1648,7 @@ static int evergreen_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB_RPTR_ADDR,
((rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC));
WREG32(CP_RB_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 81e6a56..cda01f8 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1059,7 +1059,7 @@ static int cayman_cp_resume(struct radeon_device *rdev)
WREG32(CP_DEBUG, (1 << 27));
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(SCRATCH_ADDR, ((rdev->wb.gpu_addr + RADEON_WB_SCRATCH_OFFSET) >> 8) & 0xFFFFFFFF);
WREG32(SCRATCH_UMSK, 0xff);
@@ -1076,7 +1076,7 @@ static int cayman_cp_resume(struct radeon_device *rdev)
#endif
WREG32(cp_rb_cntl[i], rb_cntl);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
addr = rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET;
WREG32(cp_rb_rptr_addr[i], addr & 0xFFFFFFFC);
WREG32(cp_rb_rptr_addr_hi[i], upper_32_bits(addr) & 0xFF);
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index b0db712..ea4691f 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -2007,7 +2007,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB0_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB0_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
@@ -2040,7 +2040,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB1_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB1_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFF);
@@ -2066,7 +2066,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB2_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB2_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFF);
diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c
index f41502e..a23b91b 100644
--- a/drivers/i2c/busses/i2c-nuc900.c
+++ b/drivers/i2c/busses/i2c-nuc900.c
@@ -304,7 +304,7 @@ retry_write:
case STATE_READ:
/* we have a byte of data in the data register, do
- * something with it, and then work out wether we are
+ * something with it, and then work out whether we are
* going to do any more read/write
*/
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 3e0335f..de9e1fa 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -208,7 +208,7 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
if (msg->flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
- /* todo - check for wether ack wanted or not */
+ /* todo - check for whether ack wanted or not */
s3c24xx_i2c_enable_ack(i2c);
iiccon = readl(i2c->regs + S3C2410_IICCON);
@@ -397,7 +397,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
case STATE_READ:
/* we have a byte of data in the data register, do
- * something with it, and then work out wether we are
+ * something with it, and then work out whether we are
* going to do any more read/write
*/
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 891558d..2de66b0 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -219,7 +219,7 @@ static int platram_probe(struct platform_device *pdev)
platram_setrw(info, PLATRAM_RW);
- /* check to see if there are any available partitions, or wether
+ /* check to see if there are any available partitions, or whether
* to add this device whole */
err = mtd_device_parse_register(info->mtd, pdata->probes, NULL,
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 295e4be..79ded48 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -879,7 +879,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
if (chip->ecc.mode != NAND_ECC_HW)
return;
- /* change the behaviour depending on wether we are using
+ /* change the behaviour depending on whether we are using
* the large or small page nand device */
if (chip->page_shift > 10) {
diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index 203ff9d..846381c 100644
--- a/drivers/net/ethernet/8390/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -109,7 +109,7 @@ static inline struct ax_device *to_ax_dev(struct net_device *dev)
/*
* ax_initial_check
*
- * do an initial probe for the card to check wether it exists
+ * do an initial probe for the card to check whether it exists
* and is functional
*/
static int ax_initial_check(struct net_device *dev)
diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
index 7ec4b86..75ec5e7 100644
--- a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
@@ -27,7 +27,7 @@ struct mcp_gen_header {
*
* Fields below this comment are extensions added in later versions
* of this struct, drivers should compare the header_length against
- * offsetof(field) to check wether a given MCP implements them.
+ * offsetof(field) to check whether a given MCP implements them.
*
* Never remove any field. Keep everything naturally align.
*/
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 58f13ad..ae7cd7f 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -608,7 +608,7 @@ static int bcm5421_poll_link(struct mii_phy* phy)
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
- /* try to find out wether we have a link */
+ /* try to find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -634,7 +634,7 @@ static int bcm5421_read_link(struct mii_phy* phy)
phy->speed = SPEED_1000;
- /* find out wether we are running half- or full duplex */
+ /* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -681,7 +681,7 @@ static int bcm5461_poll_link(struct mii_phy* phy)
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
- /* find out wether we have a link */
+ /* find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -710,7 +710,7 @@ static int bcm5461_read_link(struct mii_phy* phy)
phy->speed = SPEED_1000;
- /* find out wether we are running half- or full duplex */
+ /* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 26c81f2..afb7cfa 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -118,7 +118,7 @@ isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
return ret;
}
-/* simple check to see wether we have a isl1208 */
+/* simple check to see whether we have a isl1208 */
static int
isl1208_i2c_validate_client(struct i2c_client *client)
{
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 77823d2..a7a2a99 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -186,7 +186,7 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
rtc_tm->tm_year = readb(base + S3C2410_RTCYEAR);
rtc_tm->tm_sec = readb(base + S3C2410_RTCSEC);
- /* the only way to work out wether the system was mid-update
+ /* the only way to work out whether the system was mid-update
* when we read it is to check the second counter, and if it
* is zero, then we re-try the entire read
*/
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index b2b8c18..20cfd02 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -1344,7 +1344,7 @@ dasd_get_feature(struct ccw_device *cdev, int feature)
/*
* Set / reset given feature.
- * Flag indicates wether to set (!=0) or the reset (=0) the feature.
+ * Flag indicates whether to set (!=0) or the reset (=0) the feature.
*/
int
dasd_set_feature(struct ccw_device *cdev, int feature, int flag)
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index d36446d..73c93cf 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -883,7 +883,7 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
} else {
US_DEBUGP("%s: NOT working scsi, not SS\n", __func__);
chip->proto_handler_backup(srb, us);
- /* Check wether card is plugged in */
+ /* Check whether card is plugged in */
if (srb->cmnd[0] == TEST_UNIT_READY) {
if (srb->result == SAM_STAT_GOOD) {
SET_LUN_READY(chip, srb->device->lun);
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index 5b06d31..c0bc92d 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -212,7 +212,7 @@ static long booke_wdt_ioctl(struct file *file,
return 0;
}
-/* wdt_is_active stores wether or not the /dev/watchdog device is opened */
+/* wdt_is_active stores whether or not the /dev/watchdog device is opened */
static unsigned long wdt_is_active;
static int booke_wdt_open(struct inode *inode, struct file *file)
OpenPOWER on IntegriCloud