diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/smc91x.h | 44 | ||||
| -rw-r--r-- | drivers/serial/s3c2410.c | 2 | ||||
| -rw-r--r-- | drivers/serial/serial_lh7a40x.c | 13 | ||||
| -rw-r--r-- | drivers/video/Kconfig | 63 |
4 files changed, 101 insertions, 21 deletions
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index f72a4f5..bf776125c 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -260,15 +260,17 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define RPC_LSA_DEFAULT RPC_LED_TX_RX #define RPC_LSB_DEFAULT RPC_LED_100_10 -#elif defined(CONFIG_MACH_LPD7A400) || defined(CONFIG_MACH_LPD7A404) +#elif defined(CONFIG_MACH_LPD79520) \ + || defined(CONFIG_MACH_LPD7A400) \ + || defined(CONFIG_MACH_LPD7A404) -/* The LPD7A40X_IOBARRIER is necessary to overcome a mismatch between - * the way that the CPU handles chip selects and the way that the SMC - * chip expects the chip select to operate. Refer to +/* The LPD7X_IOBARRIER is necessary to overcome a mismatch between the + * way that the CPU handles chip selects and the way that the SMC chip + * expects the chip select to operate. Refer to * Documentation/arm/Sharp-LH/IOBarrier for details. The read from - * IOBARRIER is a byte as a least-common denominator of possible - * regions to use as the barrier. It would be wasteful to read 32 - * bits from a byte oriented region. + * IOBARRIER is a byte, in order that we read the least-common + * denominator. It would be wasteful to read 32 bits from an 8-bit + * accessible region. * * There is no explicit protection against interrupts intervening * between the writew and the IOBARRIER. In SMC ISR there is a @@ -287,25 +289,35 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_CAN_USE_16BIT 1 #define SMC_CAN_USE_32BIT 0 #define SMC_NOWAIT 0 -#define LPD7A40X_IOBARRIER readb (IOBARRIER_VIRT) +#define LPD7X_IOBARRIER readb (IOBARRIER_VIRT) -#define SMC_inw(a,r) readw ((void*) ((a) + (r))) -#define SMC_insw(a,r,p,l) readsw ((void*) ((a) + (r)), p, l) -#define SMC_outw(v,a,r) ({ writew ((v), (a) + (r)); LPD7A40X_IOBARRIER; }) +#define SMC_inw(a,r)\ + ({ unsigned short v = readw ((void*) ((a) + (r))); LPD7X_IOBARRIER; v; }) +#define SMC_outw(v,a,r) ({ writew ((v), (a) + (r)); LPD7X_IOBARRIER; }) -#define SMC_outsw LPD7A40X_SMC_outsw +#define SMC_insw LPD7_SMC_insw +static inline void LPD7_SMC_insw (unsigned char* a, int r, + unsigned char* p, int l) +{ + unsigned short* ps = (unsigned short*) p; + while (l-- > 0) { + *ps++ = readw (a + r); + LPD7X_IOBARRIER; + } +} -static inline void LPD7A40X_SMC_outsw(unsigned long a, int r, - unsigned char* p, int l) +#define SMC_outsw LPD7_SMC_outsw +static inline void LPD7_SMC_outsw (unsigned char* a, int r, + unsigned char* p, int l) { unsigned short* ps = (unsigned short*) p; while (l-- > 0) { writew (*ps++, a + r); - LPD7A40X_IOBARRIER; + LPD7X_IOBARRIER; } } -#define SMC_INTERRUPT_PREAMBLE LPD7A40X_IOBARRIER +#define SMC_INTERRUPT_PREAMBLE LPD7X_IOBARRIER #define RPC_LSA_DEFAULT RPC_LED_TX_RX #define RPC_LSB_DEFAULT RPC_LED_100_10 diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index f5aac92..53c2465 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -1365,7 +1365,7 @@ static inline void s3c2410_serial_exit(void) #endif /* CONFIG_CPU_S3C2410 */ -#ifdef CONFIG_CPU_S3C2440 +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) static int s3c2440_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *clk) diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c index aa521b8..776d4ff 100644 --- a/drivers/serial/serial_lh7a40x.c +++ b/drivers/serial/serial_lh7a40x.c @@ -145,14 +145,15 @@ lh7a40xuart_rx_chars (struct uart_port* port) { struct tty_struct* tty = port->info->tty; int cbRxMax = 256; /* (Gross) limit on receive */ - unsigned int data, flag;/* Received data and status */ + unsigned int data; /* Received data and status */ + unsigned int flag; while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) { data = UR (port, UART_R_DATA); flag = TTY_NORMAL; ++port->icount.rx; - if (unlikely(data & RxError)) { /* Quick check, short-circuit */ + if (unlikely(data & RxError)) { if (data & RxBreak) { data &= ~(RxFramingError | RxParityError); ++port->icount.brk; @@ -303,7 +304,7 @@ static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl) /* Note, kernel appears to be setting DTR and RTS on console. */ /* *** FIXME: this deserves more work. There's some work in - tracing all of the IO pins. */ + tracing all of the IO pins. */ #if 0 if( port->mapbase == UART1_PHYS) { gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS); @@ -662,9 +663,13 @@ static int __init lh7a40xuart_init(void) if (ret == 0) { int i; - for (i = 0; i < DEV_NR; i++) + for (i = 0; i < DEV_NR; i++) { + /* UART3, when used, requires GPIO pin reallocation */ + if (lh7a40x_ports[i].port.mapbase == UART3_PHYS) + GPIO_PINMUX |= 1<<3; uart_add_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port); + } } return ret; } diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 5641498..5a2840a 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -167,6 +167,69 @@ config FB_ARMCLCD here and read <file:Documentation/modules.txt>. The module will be called amba-clcd. +choice + + depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) + prompt "LCD Panel" + default FB_ARMCLCD_SHARP_LQ035Q7DB02 + +config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT + bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" + help + This is an implementation of the Sharp LQ035Q7DB02, a 3.5" + color QVGA, HRTFT panel. The LogicPD device includes an + an integrated HRTFT controller IC. + The native resolution is 240x320. + +config FB_ARMCLCD_SHARP_LQ057Q3DC02 + bool "LogicPD LCD 5.7\" QVGA" + help + This is an implementation of the Sharp LQ057Q3DC02, a 5.7" + color QVGA, TFT panel. The LogicPD device includes an + The native resolution is 320x240. + +config FB_ARMCLCD_SHARP_LQ64D343 + bool "LogicPD LCD 6.4\" VGA" + help + This is an implementation of the Sharp LQ64D343, a 6.4" + color VGA, TFT panel. The LogicPD device includes an + The native resolution is 640x480. + +config FB_ARMCLCD_SHARP_LQ10D368 + bool "LogicPD LCD 10.4\" VGA" + help + This is an implementation of the Sharp LQ10D368, a 10.4" + color VGA, TFT panel. The LogicPD device includes an + The native resolution is 640x480. + + +config FB_ARMCLCD_SHARP_LQ121S1DG41 + bool "LogicPD LCD 12.1\" SVGA" + help + This is an implementation of the Sharp LQ121S1DG41, a 12.1" + color SVGA, TFT panel. The LogicPD device includes an + The native resolution is 800x600. + + This panel requires a clock rate may be an integer fraction + of the base LCDCLK frequency. The driver will select the + highest frequency available that is lower than the maximum + allowed. The panel may flicker if the clock rate is + slower than the recommended minimum. + +config FB_ARMCLCD_AUO_A070VW01_WIDE + bool "AU Optronics A070VW01 LCD 7.0\" WIDE" + help + This is an implementation of the AU Optronics, a 7.0" + WIDE Color. The native resolution is 234x480. + +config FB_ARMCLCD_HITACHI + bool "Hitachi Wide Screen 800x480" + help + This is an implementation of the Hitachi 800x480. + +endchoice + + config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) |
