diff options
Diffstat (limited to 'drivers')
405 files changed, 19979 insertions, 5133 deletions
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index 6174965..f916ddf 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -781,7 +781,8 @@ static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci) sk_for_each(s, node, head) { vcc = atm_sk(s); if (vcc->dev == dev && vcc->vci == vci && - vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE) + vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE && + test_bit(ATM_VF_READY, &vcc->flags)) goto out; } vcc = NULL; @@ -907,6 +908,10 @@ static void pclose(struct atm_vcc *vcc) clear_bit(ATM_VF_ADDR, &vcc->flags); clear_bit(ATM_VF_READY, &vcc->flags); + /* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the + tasklet has finished processing any incoming packets (and, more to + the point, using the vcc pointer). */ + tasklet_unlock_wait(&card->tlet); return; } diff --git a/drivers/base/node.c b/drivers/base/node.c index 2bdd8a9..2872e86 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -66,8 +66,7 @@ static ssize_t node_read_meminfo(struct sys_device * dev, struct sysinfo i; si_meminfo_node(&i, nid); - - n = sprintf(buf, "\n" + n = sprintf(buf, "Node %d MemTotal: %8lu kB\n" "Node %d MemFree: %8lu kB\n" "Node %d MemUsed: %8lu kB\n" @@ -78,13 +77,33 @@ static ssize_t node_read_meminfo(struct sys_device * dev, "Node %d Active(file): %8lu kB\n" "Node %d Inactive(file): %8lu kB\n" "Node %d Unevictable: %8lu kB\n" - "Node %d Mlocked: %8lu kB\n" + "Node %d Mlocked: %8lu kB\n", + nid, K(i.totalram), + nid, K(i.freeram), + nid, K(i.totalram - i.freeram), + nid, K(node_page_state(nid, NR_ACTIVE_ANON) + + node_page_state(nid, NR_ACTIVE_FILE)), + nid, K(node_page_state(nid, NR_INACTIVE_ANON) + + node_page_state(nid, NR_INACTIVE_FILE)), + nid, K(node_page_state(nid, NR_ACTIVE_ANON)), + nid, K(node_page_state(nid, NR_INACTIVE_ANON)), + nid, K(node_page_state(nid, NR_ACTIVE_FILE)), + nid, K(node_page_state(nid, NR_INACTIVE_FILE)), + nid, K(node_page_state(nid, NR_UNEVICTABLE)), + nid, K(node_page_state(nid, NR_MLOCK))); + #ifdef CONFIG_HIGHMEM + n += sprintf(buf + n, "Node %d HighTotal: %8lu kB\n" "Node %d HighFree: %8lu kB\n" "Node %d LowTotal: %8lu kB\n" - "Node %d LowFree: %8lu kB\n" + "Node %d LowFree: %8lu kB\n", + nid, K(i.totalhigh), + nid, K(i.freehigh), + nid, K(i.totalram - i.totalhigh), + nid, K(i.freeram - i.freehigh)); #endif + n += sprintf(buf + n, "Node %d Dirty: %8lu kB\n" "Node %d Writeback: %8lu kB\n" "Node %d FilePages: %8lu kB\n" @@ -99,25 +118,6 @@ static ssize_t node_read_meminfo(struct sys_device * dev, "Node %d Slab: %8lu kB\n" "Node %d SReclaimable: %8lu kB\n" "Node %d SUnreclaim: %8lu kB\n", - nid, K(i.totalram), - nid, K(i.freeram), - nid, K(i.totalram - i.freeram), - nid, K(node_page_state(nid, NR_ACTIVE_ANON) + - node_page_state(nid, NR_ACTIVE_FILE)), - nid, K(node_page_state(nid, NR_INACTIVE_ANON) + - node_page_state(nid, NR_INACTIVE_FILE)), - nid, K(node_page_state(nid, NR_ACTIVE_ANON)), - nid, K(node_page_state(nid, NR_INACTIVE_ANON)), - nid, K(node_page_state(nid, NR_ACTIVE_FILE)), - nid, K(node_page_state(nid, NR_INACTIVE_FILE)), - nid, K(node_page_state(nid, NR_UNEVICTABLE)), - nid, K(node_page_state(nid, NR_MLOCK)), -#ifdef CONFIG_HIGHMEM - nid, K(i.totalhigh), - nid, K(i.freehigh), - nid, K(i.totalram - i.totalhigh), - nid, K(i.freeram - i.freehigh), -#endif nid, K(node_page_state(nid, NR_FILE_DIRTY)), nid, K(node_page_state(nid, NR_WRITEBACK)), nid, K(node_page_state(nid, NR_FILE_PAGES)), diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 273cee1..dc96416 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -9,6 +9,7 @@ FONTMAPFILE = cp437.uni obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o tty_port.o +obj-y += tty_mutex.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-y += misc.o diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 4f8d60c..a11c8c9 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1072,7 +1072,7 @@ static int get_serial_info(struct async_struct * info, if (!retinfo) return -EFAULT; memset(&tmp, 0, sizeof(tmp)); - lock_kernel(); + tty_lock(); tmp.type = state->type; tmp.line = state->line; tmp.port = state->port; @@ -1083,7 +1083,7 @@ static int get_serial_info(struct async_struct * info, tmp.close_delay = state->close_delay; tmp.closing_wait = state->closing_wait; tmp.custom_divisor = state->custom_divisor; - unlock_kernel(); + tty_unlock(); if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) return -EFAULT; return 0; @@ -1100,14 +1100,14 @@ static int set_serial_info(struct async_struct * info, if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) return -EFAULT; - lock_kernel(); + tty_lock(); state = info->state; old_state = *state; change_irq = new_serial.irq != state->irq; change_port = (new_serial.port != state->port); if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size)) { - unlock_kernel(); + tty_unlock(); return -EINVAL; } @@ -1127,7 +1127,7 @@ static int set_serial_info(struct async_struct * info, } if (new_serial.baud_base < 9600) { - unlock_kernel(); + tty_unlock(); return -EINVAL; } @@ -1163,7 +1163,7 @@ check_and_exit: } } else retval = startup(info); - unlock_kernel(); + tty_unlock(); return retval; } @@ -1528,6 +1528,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) { struct async_struct * info = tty->driver_data; unsigned long orig_jiffies, char_time; + int tty_was_locked = tty_locked(); int lsr; if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) @@ -1538,7 +1539,12 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) orig_jiffies = jiffies; - lock_kernel(); + /* + * tty_wait_until_sent is called from lots of places, + * with or without the BTM. + */ + if (!tty_was_locked) + tty_lock(); /* * Set the check interval to be 1/5 of the estimated time to * send a single character, and make it at least 1. The check @@ -1579,7 +1585,8 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) break; } __set_current_state(TASK_RUNNING); - unlock_kernel(); + if (!tty_was_locked) + tty_unlock(); #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); #endif @@ -1703,7 +1710,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, printk("block_til_ready blocking: ttys%d, count = %d\n", info->line, state->count); #endif + tty_unlock(); schedule(); + tty_lock(); } __set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c index 555cd93..d5fa113 100644 --- a/drivers/char/briq_panel.c +++ b/drivers/char/briq_panel.c @@ -67,15 +67,15 @@ static void set_led(char state) static int briq_panel_open(struct inode *ino, struct file *filep) { - lock_kernel(); + tty_lock(); /* enforce single access, vfd_is_open is protected by BKL */ if (vfd_is_open) { - unlock_kernel(); + tty_unlock(); return -EBUSY; } vfd_is_open = 1; - unlock_kernel(); + tty_unlock(); return 0; } diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 9824b416..27aad94 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -65,7 +65,6 @@ #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial.h> -#include <linux/smp_lock.h> #include <linux/major.h> #include <linux/string.h> #include <linux/fcntl.h> @@ -1608,7 +1607,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp) * If the port is the middle of closing, bail out now */ if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) { - wait_event_interruptible(info->port.close_wait, + wait_event_interruptible_tty(info->port.close_wait, !(info->port.flags & ASYNC_CLOSING)); return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; } @@ -1655,7 +1654,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout) return; /* Just in case.... */ orig_jiffies = jiffies; - lock_kernel(); /* * Set the check interval to be 1/5 of the estimated time to * send a single character, and make it at least 1. The check @@ -1702,7 +1700,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout) } /* Run one more char cycle */ msleep_interruptible(jiffies_to_msecs(char_time * 5)); - unlock_kernel(); #ifdef CY_DEBUG_WAIT_UNTIL_SENT printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies); #endif @@ -1959,7 +1956,6 @@ static int cy_chars_in_buffer(struct tty_struct *tty) int char_count; __u32 tx_put, tx_get, tx_bufsize; - lock_kernel(); tx_get = readl(&buf_ctrl->tx_get); tx_put = readl(&buf_ctrl->tx_put); tx_bufsize = readl(&buf_ctrl->tx_bufsize); @@ -1971,7 +1967,6 @@ static int cy_chars_in_buffer(struct tty_struct *tty) printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt + char_count); #endif - unlock_kernel(); return info->xmit_cnt + char_count; } #endif /* Z_EXT_CHARS_IN_BUFFER */ @@ -2359,17 +2354,22 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty, struct serial_struct __user *new_info) { struct serial_struct new_serial; + int ret; if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) return -EFAULT; + mutex_lock(&info->port.mutex); if (!capable(CAP_SYS_ADMIN)) { if (new_serial.close_delay != info->port.close_delay || new_serial.baud_base != info->baud || (new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) != (info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)) + { + mutex_unlock(&info->port.mutex); return -EPERM; + } info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK); info->baud = new_serial.baud_base; @@ -2392,10 +2392,12 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty, check_and_exit: if (info->port.flags & ASYNC_INITIALIZED) { cy_set_line_char(info, tty); - return 0; + ret = 0; } else { - return cy_startup(info, tty); + ret = cy_startup(info, tty); } + mutex_unlock(&info->port.mutex); + return ret; } /* set_serial_info */ /* @@ -2438,7 +2440,6 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) card = info->card; - lock_kernel(); if (!cy_is_Z(card)) { unsigned long flags; int channel = info->line - card->first_line; @@ -2478,7 +2479,6 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0); } end: - unlock_kernel(); return result; } /* cy_tiomget */ @@ -2696,7 +2696,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file, printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", info->line, cmd, arg); #endif - lock_kernel(); switch (cmd) { case CYGETMON: @@ -2817,7 +2816,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file, default: ret_val = -ENOIOCTLCMD; } - unlock_kernel(); #ifdef CY_DEBUG_OTHER printk(KERN_DEBUG "cyc:cy_ioctl done\n"); diff --git a/drivers/char/epca.c b/drivers/char/epca.c index 6f5ffe1..d9df46a 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -36,7 +36,7 @@ #include <linux/ctype.h> #include <linux/tty.h> #include <linux/tty_flip.h> -#include <linux/smp_lock.h> +#include <linux/slab.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/uaccess.h> @@ -2105,7 +2105,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, break; case DIGI_SETAW: case DIGI_SETAF: - lock_kernel(); if (cmd == DIGI_SETAW) { /* Setup an event to indicate when the transmit buffer empties */ @@ -2118,7 +2117,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, if (tty->ldisc->ops->flush_buffer) tty->ldisc->ops->flush_buffer(tty); } - unlock_kernel(); /* Fall Thru */ case DIGI_SETA: if (copy_from_user(&ch->digiext, argp, sizeof(digi_t))) diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index 911e1da..07f3ea3 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -1486,7 +1486,9 @@ ip2_open( PTTY tty, struct file *pFile ) if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) { if ( pCh->flags & ASYNC_CLOSING ) { + tty_unlock(); schedule(); + tty_lock(); } if ( tty_hung_up_p(pFile) ) { set_current_state( TASK_RUNNING ); @@ -1548,7 +1550,9 @@ ip2_open( PTTY tty, struct file *pFile ) rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS); break; } + tty_unlock(); schedule(); + tty_lock(); } set_current_state( TASK_RUNNING ); remove_wait_queue(&pCh->open_wait, &wait); diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 094bdc3..ff68e7c 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2176,6 +2176,14 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev, info->io.addr_data = res->start; info->io.regspacing = DEFAULT_REGSPACING; + res = pnp_get_resource(dev, + (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? + IORESOURCE_IO : IORESOURCE_MEM, + 1); + if (res) { + if (res->start > info->io.addr_data) + info->io.regspacing = res->start - info->io.addr_data; + } info->io.regsize = DEFAULT_REGSPACING; info->io.regshift = 0; diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 98310e1..c27e9d2 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -124,7 +124,6 @@ #include <linux/fs.h> #include <linux/sched.h> #include <linux/serial.h> -#include <linux/smp_lock.h> #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/timer.h> @@ -872,7 +871,6 @@ static struct tty_port *isicom_find_port(struct tty_struct *tty) static int isicom_open(struct tty_struct *tty, struct file *filp) { struct isi_port *port; - struct isi_board *card; struct tty_port *tport; tport = isicom_find_port(tty); @@ -1118,8 +1116,7 @@ static int isicom_set_serial_info(struct tty_struct *tty, if (copy_from_user(&newinfo, info, sizeof(newinfo))) return -EFAULT; - lock_kernel(); - + mutex_lock(&port->port.mutex); reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) != (newinfo.flags & ASYNC_SPD_MASK)); @@ -1128,7 +1125,7 @@ static int isicom_set_serial_info(struct tty_struct *tty, (newinfo.closing_wait != port->port.closing_wait) || ((newinfo.flags & ~ASYNC_USR_MASK) != (port->port.flags & ~ASYNC_USR_MASK))) { - unlock_kernel(); + mutex_unlock(&port->port.mutex); return -EPERM; } port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | @@ -1145,7 +1142,7 @@ static int isicom_set_serial_info(struct tty_struct *tty, isicom_config_port(tty); spin_unlock_irqrestore(&port->card->card_lock, flags); } - unlock_kernel(); + mutex_unlock(&port->port.mutex); return 0; } @@ -1154,7 +1151,7 @@ static int isicom_get_serial_info(struct isi_port *port, { struct serial_struct out_info; - lock_kernel(); + mutex_lock(&port->port.mutex); memset(&out_info, 0, sizeof(out_info)); /* out_info.type = ? */ out_info.line = port - isi_ports; @@ -1164,7 +1161,7 @@ static int isicom_get_serial_info(struct isi_port *port, /* out_info.baud_base = ? */ out_info.close_delay = port->port.close_delay; out_info.closing_wait = port->port.closing_wait; - unlock_kernel(); + mutex_unlock(&port->port.mutex); if (copy_to_user(info, &out_info, sizeof(out_info))) return -EFAULT; return 0; diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 4e395c9..be28391 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -203,9 +203,9 @@ static int stli_shared; * the board has been detected, and whether it is actually running a slave * or not. */ -#define BST_FOUND 0x1 -#define BST_STARTED 0x2 -#define BST_PROBED 0x4 +#define BST_FOUND 0 +#define BST_STARTED 1 +#define BST_PROBED 2 /* * Define the set of port state flags. These are marked for internal @@ -816,7 +816,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) brdp = stli_brds[brdnr]; if (brdp == NULL) return -ENODEV; - if ((brdp->state & BST_STARTED) == 0) + if (!test_bit(BST_STARTED, &brdp->state)) return -ENODEV; portnr = MINOR2PORT(minordev); if (portnr > brdp->nrports) @@ -954,7 +954,7 @@ static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned l * order of opens and closes may not be preserved across shared * memory, so we must wait until it is complete. */ - wait_event_interruptible(portp->raw_wait, + wait_event_interruptible_tty(portp->raw_wait, !test_bit(ST_CLOSING, &portp->state)); if (signal_pending(current)) { return -ERESTARTSYS; @@ -989,7 +989,7 @@ static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned l set_bit(ST_OPENING, &portp->state); spin_unlock_irqrestore(&brd_lock, flags); - wait_event_interruptible(portp->raw_wait, + wait_event_interruptible_tty(portp->raw_wait, !test_bit(ST_OPENING, &portp->state)); if (signal_pending(current)) rc = -ERESTARTSYS; @@ -1020,7 +1020,7 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned * occurs on this port. */ if (wait) { - wait_event_interruptible(portp->raw_wait, + wait_event_interruptible_tty(portp->raw_wait, !test_bit(ST_CLOSING, &portp->state)); if (signal_pending(current)) { return -ERESTARTSYS; @@ -1052,7 +1052,7 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned * to come back. */ rc = 0; - wait_event_interruptible(portp->raw_wait, + wait_event_interruptible_tty(portp->raw_wait, !test_bit(ST_CLOSING, &portp->state)); if (signal_pending(current)) rc = -ERESTARTSYS; @@ -1073,6 +1073,10 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback) { + /* + * no need for wait_event_tty because clearing ST_CMDING cannot block + * on BTM + */ wait_event_interruptible(portp->raw_wait, !test_bit(ST_CMDING, &portp->state)); if (signal_pending(current)) @@ -1846,7 +1850,7 @@ static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stlip rc = stli_portcmdstats(NULL, portp); uart = "UNKNOWN"; - if (brdp->state & BST_STARTED) { + if (test_bit(BST_STARTED, &brdp->state)) { switch (stli_comstats.hwid) { case 0: uart = "2681"; break; case 1: uart = "SC26198"; break; @@ -1855,7 +1859,7 @@ static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stlip } seq_printf(m, "%d: uart:%s ", portnr, uart); - if ((brdp->state & BST_STARTED) && (rc >= 0)) { + if (test_bit(BST_STARTED, &brdp->state) && rc >= 0) { char sep; seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal, @@ -2355,7 +2359,7 @@ static void stli_poll(unsigned long arg) brdp = stli_brds[brdnr]; if (brdp == NULL) continue; - if ((brdp->state & BST_STARTED) == 0) + if (!test_bit(BST_STARTED, &brdp->state)) continue; spin_lock(&brd_lock); @@ -3140,7 +3144,7 @@ static int stli_initecp(struct stlibrd *brdp) } - brdp->state |= BST_FOUND; + set_bit(BST_FOUND, &brdp->state); return 0; err_unmap: iounmap(brdp->membase); @@ -3297,7 +3301,7 @@ static int stli_initonb(struct stlibrd *brdp) brdp->panels[0] = brdp->nrports; - brdp->state |= BST_FOUND; + set_bit(BST_FOUND, &brdp->state); return 0; err_unmap: iounmap(brdp->membase); @@ -3407,7 +3411,7 @@ stli_donestartup: spin_unlock_irqrestore(&brd_lock, flags); if (rc == 0) - brdp->state |= BST_STARTED; + set_bit(BST_STARTED, &brdp->state); if (! stli_timeron) { stli_timeron++; @@ -3710,7 +3714,7 @@ static int __devinit stli_pciprobe(struct pci_dev *pdev, if (retval) goto err_null; - brdp->state |= BST_PROBED; + set_bit(BST_PROBED, &brdp->state); pci_set_drvdata(pdev, brdp); EBRDENABLE(brdp); @@ -3841,7 +3845,7 @@ static int __init stli_initbrds(void) brdp = stli_brds[i]; if (brdp == NULL) continue; - if (brdp->state & BST_FOUND) { + if (test_bit(BST_FOUND, &brdp->state)) { EBRDENABLE(brdp); brdp->enable = NULL; brdp->disable = NULL; @@ -4011,6 +4015,7 @@ static int stli_getbrdstats(combrd_t __user *bp) return -ENODEV; memset(&stli_brdstats, 0, sizeof(combrd_t)); + stli_brdstats.brd = brdp->brdnr; stli_brdstats.type = brdp->brdtype; stli_brdstats.hwid = 0; @@ -4076,10 +4081,13 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp) if (brdp == NULL) return -ENODEV; - if (brdp->state & BST_STARTED) { + mutex_lock(&portp->port.mutex); + if (test_bit(BST_STARTED, &brdp->state)) { if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS, - &stli_cdkstats, sizeof(asystats_t), 1)) < 0) + &stli_cdkstats, sizeof(asystats_t), 1)) < 0) { + mutex_unlock(&portp->port.mutex); return rc; + } } else { memset(&stli_cdkstats, 0, sizeof(asystats_t)); } @@ -4124,6 +4132,7 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp) stli_comstats.modem = stli_cdkstats.dcdcnt; stli_comstats.hwid = stli_cdkstats.hwid; stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals); + mutex_unlock(&portp->port.mutex); return 0; } @@ -4186,15 +4195,20 @@ static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp) if (!brdp) return -ENODEV; - if (brdp->state & BST_STARTED) { - if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) + mutex_lock(&portp->port.mutex); + + if (test_bit(BST_STARTED, &brdp->state)) { + if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) { + mutex_unlock(&portp->port.mutex); return rc; + } } memset(&stli_comstats, 0, sizeof(comstats_t)); stli_comstats.brd = portp->brdnr; stli_comstats.panel = portp->panelnr; stli_comstats.port = portp->portnr; + mutex_unlock(&portp->port.mutex); if (copy_to_user(cp, &stli_comstats, sizeof(comstats_t))) return -EFAULT; @@ -4266,8 +4280,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) done = 0; rc = 0; - lock_kernel(); - switch (cmd) { case COM_GETPORTSTATS: rc = stli_getportstats(NULL, NULL, argp); @@ -4290,8 +4302,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) done++; break; } - unlock_kernel(); - if (done) return rc; @@ -4308,8 +4318,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) if (brdp->state == 0) return -ENODEV; - lock_kernel(); - switch (cmd) { case STL_BINTR: EBRDINTR(brdp); @@ -4318,10 +4326,10 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) rc = stli_startbrd(brdp); break; case STL_BSTOP: - brdp->state &= ~BST_STARTED; + clear_bit(BST_STARTED, &brdp->state); break; case STL_BRESET: - brdp->state &= ~BST_STARTED; + clear_bit(BST_STARTED, &brdp->state); EBRDRESET(brdp); if (stli_shared == 0) { if (brdp->reenable != NULL) @@ -4332,7 +4340,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) rc = -ENOIOCTLCMD; break; } - unlock_kernel(); return rc; } @@ -4378,7 +4385,8 @@ static void istallion_cleanup_isa(void) unsigned int j; for (j = 0; (j < stli_nrbrds); j++) { - if ((brdp = stli_brds[j]) == NULL || (brdp->state & BST_PROBED)) + if ((brdp = stli_brds[j]) == NULL || + test_bit(BST_PROBED, &brdp->state)) continue; stli_cleanup_ports(brdp); diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 25be210..a7ca752 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -299,7 +299,7 @@ int kbd_rate(struct kbd_repeat *rep) */ static void put_queue(struct vc_data *vc, int ch) { - struct tty_struct *tty = vc->vc_tty; + struct tty_struct *tty = vc->port.tty; if (tty) { tty_insert_flip_char(tty, ch, 0); @@ -309,7 +309,7 @@ static void put_queue(struct vc_data *vc, int ch) static void puts_queue(struct vc_data *vc, char *cp) { - struct tty_struct *tty = vc->vc_tty; + struct tty_struct *tty = vc->port.tty; if (!tty) return; @@ -485,7 +485,7 @@ static void fn_show_ptregs(struct vc_data *vc) static void fn_hold(struct vc_data *vc) { - struct tty_struct *tty = vc->vc_tty; + struct tty_struct *tty = vc->port.tty; if (rep || !tty) return; @@ -563,7 +563,7 @@ static void fn_inc_console(struct vc_data *vc) static void fn_send_intr(struct vc_data *vc) { - struct tty_struct *tty = vc->vc_tty; + struct tty_struct *tty = vc->port.tty; if (!tty) return; @@ -1162,7 +1162,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) struct keyboard_notifier_param param = { .vc = vc, .value = keycode, .down = down }; int rc; - tty = vc->vc_tty; + tty = vc->port.tty; if (tty && (!tty->driver_data)) { /* No driver data? Strange. Okay we fix it then. */ diff --git a/drivers/char/misc.c b/drivers/char/misc.c index cd650ca..abdafd4 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -242,7 +242,7 @@ int misc_deregister(struct miscdevice *misc) { int i = DYNAMIC_MINORS - misc->minor - 1; - if (list_empty(&misc->list)) + if (WARN_ON(list_empty(&misc->list))) return -EINVAL; mutex_lock(&misc_mtx); diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index d2692d4..3fc89da 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -2193,7 +2193,7 @@ static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port port->mon_data.up_txcnt += (cnt - port->xmit_cnt); port->icount.tx += (cnt - port->xmit_cnt); - if (port->xmit_cnt < WAKEUP_CHARS && tty) + if (port->xmit_cnt < WAKEUP_CHARS) tty_wakeup(tty); if (port->xmit_cnt <= 0) { diff --git a/drivers/char/n_gsm.c b/drivers/char/n_gsm.c index e4089c4..099105e 100644 --- a/drivers/char/n_gsm.c +++ b/drivers/char/n_gsm.c @@ -43,7 +43,6 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/tty.h> -#include <linux/timer.h> #include <linux/ctype.h> #include <linux/mm.h> #include <linux/string.h> diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c index c68118e..47d3228 100644 --- a/drivers/char/n_hdlc.c +++ b/drivers/char/n_hdlc.c @@ -598,18 +598,18 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, return -EFAULT; } - lock_kernel(); + tty_lock(); for (;;) { if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { - unlock_kernel(); + tty_unlock(); return -EIO; } n_hdlc = tty2n_hdlc (tty); if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || tty != n_hdlc->tty) { - unlock_kernel(); + tty_unlock(); return 0; } @@ -619,13 +619,13 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, /* no data */ if (file->f_flags & O_NONBLOCK) { - unlock_kernel(); + tty_unlock(); return -EAGAIN; } interruptible_sleep_on (&tty->read_wait); if (signal_pending(current)) { - unlock_kernel(); + tty_unlock(); return -EINTR; } } @@ -648,7 +648,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, kfree(rbuf); else n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf); - unlock_kernel(); + tty_unlock(); return ret; } /* end of n_hdlc_tty_read() */ @@ -691,7 +691,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, count = maxframe; } - lock_kernel(); + tty_lock(); add_wait_queue(&tty->write_wait, &wait); set_current_state(TASK_INTERRUPTIBLE); @@ -731,7 +731,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf); n_hdlc_send_frames(n_hdlc,tty); } - unlock_kernel(); + tty_unlock(); return error; } /* end of n_hdlc_tty_write() */ diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index c1d8b54..a98290d 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -1067,7 +1067,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, TRACE_L("read()"); - lock_kernel(); + tty_lock(); pClient = findClient(pInfo, task_pid(current)); if (pClient) { @@ -1079,7 +1079,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, goto unlock; } /* block until there is a message: */ - wait_event_interruptible(pInfo->read_wait, + wait_event_interruptible_tty(pInfo->read_wait, (pMsg = remove_msg(pInfo, pClient))); } @@ -1109,7 +1109,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, } ret = -EPERM; unlock: - unlock_kernel(); + tty_unlock(); return ret; } @@ -1158,7 +1158,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, pHeader->locks = 0; pHeader->owner = NULL; - lock_kernel(); + tty_lock(); pClient = findClient(pInfo, task_pid(current)); if (pClient) { @@ -1177,7 +1177,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, add_tx_queue(pInfo, pHeader); trigger_transmit(pInfo); - unlock_kernel(); + tty_unlock(); return 0; } diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index bdae832..428f4fe 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -1102,6 +1102,11 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (I_IUCLC(tty) && L_IEXTEN(tty)) c = tolower(c); + if (L_EXTPROC(tty)) { + put_tty_queue(c, tty); + return; + } + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) && c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) { @@ -1409,7 +1414,8 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, n_tty_set_room(tty); - if (!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) { + if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) || + L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) wake_up_interruptible(&tty->read_wait); @@ -1585,7 +1591,7 @@ static int n_tty_open(struct tty_struct *tty) static inline int input_available_p(struct tty_struct *tty, int amt) { tty_flush_to_ldisc(tty); - if (tty->icanon) { + if (tty->icanon && !L_EXTPROC(tty)) { if (tty->canon_data) return 1; } else if (tty->read_cnt >= (amt ? amt : 1)) @@ -1632,6 +1638,11 @@ static int copy_from_read_buf(struct tty_struct *tty, spin_lock_irqsave(&tty->read_lock, flags); tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1); tty->read_cnt -= n; + /* Turn single EOF into zero-length read */ + if (L_EXTPROC(tty) && tty->icanon && n == 1) { + if (!tty->read_cnt && (*b)[n-1] == EOF_CHAR(tty)) + n--; + } spin_unlock_irqrestore(&tty->read_lock, flags); *b += n; *nr -= n; @@ -1812,7 +1823,7 @@ do_it_again: nr--; } - if (tty->icanon) { + if (tty->icanon && !L_EXTPROC(tty)) { /* N.B. avoid overrun if nr == 0 */ while (nr && tty->read_cnt) { int eol; diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index a663800..18af923 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -1611,6 +1611,8 @@ static int ntty_install(struct tty_driver *driver, struct tty_struct *tty) ret = tty_init_termios(tty); if (ret == 0) { tty_driver_kref_get(driver); + tty->count++; + tty->driver_data = port; driver->ttys[tty->index] = tty; } return ret; @@ -1639,7 +1641,7 @@ static int ntty_activate(struct tty_port *tport, struct tty_struct *tty) static int ntty_open(struct tty_struct *tty, struct file *filp) { - struct port *port = get_port_by_tty(tty); + struct port *port = tty->driver_data; return tty_port_open(&port->port, tty, filp); } diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/char/pcmcia/ipwireless/network.c index 6592016..9fe5383 100644 --- a/drivers/char/pcmcia/ipwireless/network.c +++ b/drivers/char/pcmcia/ipwireless/network.c @@ -239,7 +239,7 @@ static int ipwireless_ppp_ioctl(struct ppp_channel *ppp_channel, return err; } -static struct ppp_channel_ops ipwireless_ppp_channel_ops = { +static const struct ppp_channel_ops ipwireless_ppp_channel_ops = { .start_xmit = ipwireless_ppp_start_xmit, .ioctl = ipwireless_ppp_ioctl }; diff --git a/drivers/char/pty.c b/drivers/char/pty.c index d83a431..ad46eae 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -62,7 +62,9 @@ static void pty_close(struct tty_struct *tty, struct file *filp) if (tty->driver == ptm_driver) devpts_pty_kill(tty->link); #endif + tty_unlock(); tty_vhangup(tty->link); + tty_lock(); } } @@ -171,6 +173,23 @@ static int pty_set_lock(struct tty_struct *tty, int __user *arg) return 0; } +/* Send a signal to the slave */ +static int pty_signal(struct tty_struct *tty, int sig) +{ + unsigned long flags; + struct pid *pgrp; + + if (tty->link) { + spin_lock_irqsave(&tty->link->ctrl_lock, flags); + pgrp = get_pid(tty->link->pgrp); + spin_unlock_irqrestore(&tty->link->ctrl_lock, flags); + + kill_pgrp(pgrp, sig, 1); + put_pid(pgrp); + } + return 0; +} + static void pty_flush_buffer(struct tty_struct *tty) { struct tty_struct *to = tty->link; @@ -321,6 +340,8 @@ static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file, switch (cmd) { case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */ return pty_set_lock(tty, (int __user *) arg); + case TIOCSIG: /* Send signal to other side of pty */ + return pty_signal(tty, (int) arg); } return -ENOIOCTLCMD; } @@ -476,6 +497,8 @@ static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file, return pty_set_lock(tty, (int __user *)arg); case TIOCGPTN: /* Get PT Number */ return put_user(tty->index, (unsigned int __user *)arg); + case TIOCSIG: /* Send signal to other side of pty */ + return pty_signal(tty, (int) arg); } return -ENOIOCTLCMD; @@ -626,7 +649,7 @@ static const struct tty_operations pty_unix98_ops = { * allocated_ptys_lock handles the list of free pty numbers */ -static int __ptmx_open(struct inode *inode, struct file *filp) +static int ptmx_open(struct inode *inode, struct file *filp) { struct tty_struct *tty; int retval; @@ -635,11 +658,14 @@ static int __ptmx_open(struct inode *inode, struct file *filp) nonseekable_open(inode, filp); /* find a device that is not in use. */ + tty_lock(); index = devpts_new_index(inode); + tty_unlock(); if (index < 0) return index; mutex_lock(&tty_mutex); + tty_lock(); tty = tty_init_dev(ptm_driver, index, 1); mutex_unlock(&tty_mutex); @@ -657,26 +683,21 @@ static int __ptmx_open(struct inode *inode, struct file *filp) goto out1; retval = ptm_driver->ops->open(tty, filp); - if (!retval) - return 0; + if (retval) + goto out2; out1: + tty_unlock(); + return retval; +out2: + tty_unlock(); tty_release(inode, filp); return retval; out: devpts_kill_index(inode, index); + tty_unlock(); return retval; } -static int ptmx_open(struct inode *inode, struct file *filp) -{ - int ret; - - lock_kernel(); - ret = __ptmx_open(inode, filp); - unlock_kernel(); - return ret; -} - static struct file_operations ptmx_fops; static void __init unix98_pty_init(void) diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index b02332a..af4de1f 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -47,7 +47,6 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/tty_flip.h> -#include <linux/smp_lock.h> #include <linux/spinlock.h> #include <linux/device.h> @@ -1184,6 +1183,7 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port, if (copy_from_user(&tmp, newinfo, sizeof(tmp))) return -EFAULT; + mutex_lock(&port->port.mutex); change_speed = ((port->port.flags & ASYNC_SPD_MASK) != (tmp.flags & ASYNC_SPD_MASK)); @@ -1191,8 +1191,10 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port, if ((tmp.close_delay != port->port.close_delay) || (tmp.closing_wait != port->port.closing_wait) || ((tmp.flags & ~ASYNC_USR_MASK) != - (port->port.flags & ~ASYNC_USR_MASK))) + (port->port.flags & ~ASYNC_USR_MASK))) { + mutex_unlock(&port->port.mutex); return -EPERM; + } port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | (tmp.flags & ASYNC_USR_MASK)); } else { @@ -1208,6 +1210,7 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port, rc_change_speed(tty, bp, port); spin_unlock_irqrestore(&riscom_lock, flags); } + mutex_unlock(&port->port.mutex); return 0; } @@ -1220,12 +1223,15 @@ static int rc_get_serial_info(struct riscom_port *port, memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_CIRRUS; tmp.line = port - rc_port; + + mutex_lock(&port->port.mutex); tmp.port = bp->base; tmp.irq = bp->irq; tmp.flags = port->port.flags; tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC; tmp.close_delay = port->port.close_delay * HZ/100; tmp.closing_wait = port->port.closing_wait * HZ/100; + mutex_unlock(&port->port.mutex); tmp.xmit_fifo_size = CD180_NFIFO; return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0; } @@ -1242,14 +1248,10 @@ static int rc_ioctl(struct tty_struct *tty, struct file *filp, switch (cmd) { case TIOCGSERIAL: - lock_kernel(); retval = rc_get_serial_info(port, argp); - unlock_kernel(); break; case TIOCSSERIAL: - lock_kernel(); retval = rc_set_serial_info(tty, port, argp); - unlock_kernel(); break; default: retval = -ENOIOCTLCMD; diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 0e29a23..79c3bc6 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -73,7 +73,6 @@ #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/serial.h> -#include <linux/smp_lock.h> #include <linux/string.h> #include <linux/fcntl.h> #include <linux/ptrace.h> @@ -1017,6 +1016,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp) if (tty_port_close_start(port, tty, filp) == 0) return; + mutex_lock(&port->mutex); cp = &info->channel; /* * Before we drop DTR, make sure the UART transmitter @@ -1060,9 +1060,13 @@ static void rp_close(struct tty_struct *tty, struct file *filp) info->xmit_buf = NULL; } } + spin_lock_irq(&port->lock); info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE); tty->closing = 0; + spin_unlock_irq(&port->lock); + mutex_unlock(&port->mutex); tty_port_tty_set(port, NULL); + wake_up_interruptible(&port->close_wait); complete_all(&info->close_wait); atomic_dec(&rp_num_ports_open); @@ -1210,11 +1214,13 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo) if (!retinfo) return -EFAULT; memset(&tmp, 0, sizeof (tmp)); + mutex_lock(&info->port.mutex); tmp.line = info->line; tmp.flags = info->flags; tmp.close_delay = info->port.close_delay; tmp.closing_wait = info->port.closing_wait; tmp.port = rcktpt_io_addr[(info->line >> 5) & 3]; + mutex_unlock(&info->port.mutex); if (copy_to_user(retinfo, &tmp, sizeof (*retinfo))) return -EFAULT; @@ -1229,10 +1235,13 @@ static int set_config(struct tty_struct *tty, struct r_port *info, if (copy_from_user(&new_serial, new_info, sizeof (new_serial))) return -EFAULT; + mutex_lock(&info->port.mutex); if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) + if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) { + mutex_unlock(&info->port.mutex); return -EPERM; + } info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK)); configure_r_port(tty, info, NULL); return 0; @@ -1250,6 +1259,7 @@ static int set_config(struct tty_struct *tty, struct r_port *info, tty->alt_speed = 230400; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) tty->alt_speed = 460800; + mutex_unlock(&info->port.mutex); configure_r_port(tty, info, NULL); return 0; @@ -1325,8 +1335,6 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file, if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl")) return -ENXIO; - lock_kernel(); - switch (cmd) { case RCKP_GET_STRUCT: if (copy_to_user(argp, info, sizeof (struct r_port))) @@ -1350,7 +1358,6 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file, default: ret = -ENOIOCTLCMD; } - unlock_kernel(); return ret; } @@ -1471,7 +1478,6 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) jiffies); printk(KERN_INFO "cps=%d...\n", info->cps); #endif - lock_kernel(); while (1) { txcnt = sGetTxCnt(cp); if (!txcnt) { @@ -1499,7 +1505,6 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) break; } __set_current_state(TASK_RUNNING); - unlock_kernel(); #ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies); #endif @@ -1512,6 +1517,7 @@ static void rp_hangup(struct tty_struct *tty) { CHANNEL_t *cp; struct r_port *info = tty->driver_data; + unsigned long flags; if (rocket_paranoia_check(info, "rp_hangup")) return; @@ -1520,11 +1526,15 @@ static void rp_hangup(struct tty_struct *tty) printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line); #endif rp_flush_buffer(tty); - if (info->port.flags & ASYNC_CLOSING) + spin_lock_irqsave(&info->port.lock, flags); + if (info->port.flags & ASYNC_CLOSING) { + spin_unlock_irqrestore(&info->port.lock, flags); return; + } if (info->port.count) atomic_dec(&rp_num_ports_open); clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + spin_unlock_irqrestore(&info->port.lock, flags); tty_port_hangup(&info->port); @@ -1535,7 +1545,7 @@ static void rp_hangup(struct tty_struct *tty) sDisCTSFlowCtl(cp); sDisTxSoftFlowCtl(cp); sClrTxXOFF(cp); - info->port.flags &= ~ASYNC_INITIALIZED; + clear_bit(ASYNCB_INITIALIZED, &info->port.flags); wake_up_interruptible(&info->port.open_wait); } diff --git a/drivers/char/selection.c b/drivers/char/selection.c index f97b9e8..ebae344 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -26,6 +26,7 @@ #include <linux/selection.h> #include <linux/tiocl.h> #include <linux/console.h> +#include <linux/smp_lock.h> /* Don't take this from <ctype.h>: 011-015 on the screen aren't spaces */ #define isspace(c) ((c) == ' ') @@ -312,12 +313,20 @@ int paste_selection(struct tty_struct *tty) struct tty_ldisc *ld; DECLARE_WAITQUEUE(wait, current); + /* always called with BTM from vt_ioctl */ + WARN_ON(!tty_locked()); + acquire_console_sem(); poke_blanked_console(); release_console_sem(); - ld = tty_ldisc_ref_wait(tty); - + ld = tty_ldisc_ref(tty); + if (!ld) { + tty_unlock(); + ld = tty_ldisc_ref_wait(tty); + tty_lock(); + } + add_wait_queue(&vc->paste_wait, &wait); while (sel_buffer && sel_buffer_lth > pasted) { set_current_state(TASK_INTERRUPTIBLE); diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index ecbe479..f646725 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -1505,7 +1505,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */ #endif - lock_kernel(); + tty_lock(); switch (cmd) { case CYGETMON: @@ -1561,7 +1561,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, default: ret_val = -ENOIOCTLCMD; } - unlock_kernel(); + tty_unlock(); #ifdef SERIAL_DEBUG_OTHER printk("cy_ioctl done\n"); @@ -1786,7 +1786,9 @@ block_til_ready(struct tty_struct *tty, struct file *filp, tty->name, info->count); /**/ #endif - schedule(); + tty_unlock(); + schedule(); + tty_lock(); } __set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 2c24fcd..9f8495b 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -1365,7 +1365,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, retval = -ERESTARTSYS; break; } + tty_unlock(); schedule(); + tty_lock(); } set_current_state(TASK_RUNNING); @@ -1863,8 +1865,7 @@ static int sx_set_serial_info(struct specialix_port *port, return -EFAULT; } - lock_kernel(); - + mutex_lock(&port->port.mutex); change_speed = ((port->port.flags & ASYNC_SPD_MASK) != (tmp.flags & ASYNC_SPD_MASK)); change_speed |= (tmp.custom_divisor != port->custom_divisor); @@ -1875,7 +1876,7 @@ static int sx_set_serial_info(struct specialix_port *port, ((tmp.flags & ~ASYNC_USR_MASK) != (port->port.flags & ~ASYNC_USR_MASK))) { func_exit(); - unlock_kernel(); + mutex_unlock(&port->port.mutex); return -EPERM; } port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | @@ -1892,7 +1893,7 @@ static int sx_set_serial_info(struct specialix_port *port, sx_change_speed(bp, port); func_exit(); - unlock_kernel(); + mutex_unlock(&port->port.mutex); return 0; } @@ -1906,7 +1907,7 @@ static int sx_get_serial_info(struct specialix_port *port, func_enter(); memset(&tmp, 0, sizeof(tmp)); - lock_kernel(); + mutex_lock(&port->port.mutex); tmp.type = PORT_CIRRUS; tmp.line = port - sx_port; tmp.port = bp->base; @@ -1917,7 +1918,7 @@ static int sx_get_serial_info(struct specialix_port *port, tmp.closing_wait = port->port.closing_wait * HZ/100; tmp.custom_divisor = port->custom_divisor; tmp.xmit_fifo_size = CD186x_NFIFO; - unlock_kernel(); + mutex_unlock(&port->port.mutex); if (copy_to_user(retinfo, &tmp, sizeof(tmp))) { func_exit(); return -EFAULT; diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 6049fd7..f2167f8 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -807,7 +807,6 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout) timeout = HZ; tend = jiffies + timeout; - lock_kernel(); while (stl_datastate(portp)) { if (signal_pending(current)) break; @@ -815,7 +814,6 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout) if (time_after_eq(jiffies, tend)) break; } - unlock_kernel(); } /*****************************************************************************/ @@ -1029,6 +1027,8 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp) pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp); memset(&sio, 0, sizeof(struct serial_struct)); + + mutex_lock(&portp->port.mutex); sio.line = portp->portnr; sio.port = portp->ioaddr; sio.flags = portp->port.flags; @@ -1048,6 +1048,7 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp) brdp = stl_brds[portp->brdnr]; if (brdp != NULL) sio.irq = brdp->irq; + mutex_unlock(&portp->port.mutex); return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0; } @@ -1069,12 +1070,15 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) return -EFAULT; + mutex_lock(&portp->port.mutex); if (!capable(CAP_SYS_ADMIN)) { if ((sio.baud_base != portp->baud_base) || (sio.close_delay != portp->close_delay) || ((sio.flags & ~ASYNC_USR_MASK) != - (portp->port.flags & ~ASYNC_USR_MASK))) + (portp->port.flags & ~ASYNC_USR_MASK))) { + mutex_unlock(&portp->port.mutex); return -EPERM; + } } portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) | @@ -1083,6 +1087,7 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp portp->close_delay = sio.close_delay; portp->closing_wait = sio.closing_wait; portp->custom_divisor = sio.custom_divisor; + mutex_unlock(&portp->port.mutex); stl_setport(portp, tty->termios); return 0; } @@ -1147,8 +1152,6 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd rc = 0; - lock_kernel(); - switch (cmd) { case TIOCGSERIAL: rc = stl_getserial(portp, argp); @@ -1173,7 +1176,6 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd rc = -ENOIOCTLCMD; break; } - unlock_kernel(); return rc; } @@ -2327,6 +2329,7 @@ static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comst return -ENODEV; } + mutex_lock(&portp->port.mutex); portp->stats.state = portp->istate; portp->stats.flags = portp->port.flags; portp->stats.hwid = portp->hwid; @@ -2358,6 +2361,7 @@ static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comst (STL_TXBUFSIZE - (tail - head)); portp->stats.signals = (unsigned long) stl_getsignals(portp); + mutex_unlock(&portp->port.mutex); return copy_to_user(cp, &portp->stats, sizeof(comstats_t)) ? -EFAULT : 0; @@ -2382,10 +2386,12 @@ static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp) return -ENODEV; } + mutex_lock(&portp->port.mutex); memset(&portp->stats, 0, sizeof(comstats_t)); portp->stats.brd = portp->brdnr; portp->stats.panel = portp->panelnr; portp->stats.port = portp->portnr; + mutex_unlock(&portp->port.mutex); return copy_to_user(cp, &portp->stats, sizeof(comstats_t)) ? -EFAULT : 0; } @@ -2451,7 +2457,6 @@ static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) return -ENODEV; rc = 0; - lock_kernel(); switch (cmd) { case COM_GETPORTSTATS: rc = stl_getportstats(NULL, NULL, argp); @@ -2472,7 +2477,6 @@ static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) rc = -ENOIOCTLCMD; break; } - unlock_kernel(); return rc; } diff --git a/drivers/char/sx.c b/drivers/char/sx.c index a81ec4f..5b24db4 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -1699,7 +1699,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, if (!capable(CAP_SYS_RAWIO)) return -EPERM; - lock_kernel(); + tty_lock(); sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg); @@ -1848,7 +1848,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, break; } out: - unlock_kernel(); + tty_unlock(); func_exit(); return rc; } @@ -1859,7 +1859,7 @@ static int sx_break(struct tty_struct *tty, int flag) int rv; func_enter(); - lock_kernel(); + tty_lock(); if (flag) rv = sx_send_command(port, HS_START, -1, HS_IDLE_BREAK); @@ -1868,7 +1868,7 @@ static int sx_break(struct tty_struct *tty, int flag) if (rv != 1) printk(KERN_ERR "sx: couldn't send break (%x).\n", read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat))); - unlock_kernel(); + tty_unlock(); func_exit(); return 0; } @@ -1909,7 +1909,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp, /* func_enter2(); */ rc = 0; - lock_kernel(); + tty_lock(); switch (cmd) { case TIOCGSERIAL: rc = gs_getserial(&port->gs, argp); @@ -1921,7 +1921,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp, rc = -ENOIOCTLCMD; break; } - unlock_kernel(); + tty_unlock(); /* func_exit(); */ return rc; diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 0658fc5..a2a5800 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -81,7 +81,6 @@ #include <linux/mm.h> #include <linux/seq_file.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/delay.h> #include <linux/netdevice.h> #include <linux/vmalloc.h> @@ -2436,7 +2435,9 @@ static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user * if (!user_icount) { memset(&info->icount, 0, sizeof(info->icount)); } else { + mutex_lock(&info->port.mutex); COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); + mutex_unlock(&info->port.mutex); if (err) return -EFAULT; } @@ -2461,7 +2462,9 @@ static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_p printk("%s(%d):mgsl_get_params(%s)\n", __FILE__,__LINE__, info->device_name); + mutex_lock(&info->port.mutex); COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); + mutex_unlock(&info->port.mutex); if (err) { if ( debug_level >= DEBUG_LEVEL_INFO ) printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n", @@ -2501,11 +2504,13 @@ static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_pa return -EFAULT; } + mutex_lock(&info->port.mutex); spin_lock_irqsave(&info->irq_spinlock,flags); memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); spin_unlock_irqrestore(&info->irq_spinlock,flags); mgsl_change_params(info); + mutex_unlock(&info->port.mutex); return 0; @@ -2935,7 +2940,6 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { struct mgsl_struct * info = tty->driver_data; - int ret; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__, @@ -2950,10 +2954,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file, return -EIO; } - lock_kernel(); - ret = mgsl_ioctl_common(info, cmd, arg); - unlock_kernel(); - return ret; + return mgsl_ioctl_common(info, cmd, arg); } static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg) @@ -3109,12 +3110,14 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp) if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - + + mutex_lock(&info->port.mutex); if (info->port.flags & ASYNC_INITIALIZED) mgsl_wait_until_sent(tty, info->timeout); mgsl_flush_buffer(tty); tty_ldisc_flush(tty); shutdown(info); + mutex_unlock(&info->port.mutex); tty_port_close_end(&info->port, tty); info->port.tty = NULL; @@ -3162,7 +3165,6 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) * Note: use tight timings here to satisfy the NIST-PCTS. */ - lock_kernel(); if ( info->params.data_rate ) { char_time = info->timeout/(32 * 5); if (!char_time) @@ -3192,7 +3194,6 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) break; } } - unlock_kernel(); exit: if (debug_level >= DEBUG_LEVEL_INFO) @@ -3348,7 +3349,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, printk("%s(%d):block_til_ready blocking on %s count=%d\n", __FILE__,__LINE__, tty->driver->name, port->count ); + tty_unlock(); schedule(); + tty_lock(); } set_current_state(TASK_RUNNING); diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 334cf5c..fef80cf 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -40,8 +40,8 @@ #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label)) -//#define DBGTBUF(info) dump_tbufs(info) -//#define DBGRBUF(info) dump_rbufs(info) +/*#define DBGTBUF(info) dump_tbufs(info)*/ +/*#define DBGRBUF(info) dump_rbufs(info)*/ #include <linux/module.h> @@ -62,7 +62,6 @@ #include <linux/mm.h> #include <linux/seq_file.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/netdevice.h> #include <linux/vmalloc.h> #include <linux/init.h> @@ -676,12 +675,14 @@ static int open(struct tty_struct *tty, struct file *filp) goto cleanup; } + mutex_lock(&info->port.mutex); info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); if (info->netcount) { retval = -EBUSY; spin_unlock_irqrestore(&info->netlock, flags); + mutex_unlock(&info->port.mutex); goto cleanup; } info->port.count++; @@ -693,7 +694,7 @@ static int open(struct tty_struct *tty, struct file *filp) if (retval < 0) goto cleanup; } - + mutex_unlock(&info->port.mutex); retval = block_til_ready(tty, filp, info); if (retval) { DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval)); @@ -725,12 +726,14 @@ static void close(struct tty_struct *tty, struct file *filp) if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; + mutex_lock(&info->port.mutex); if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); tty_ldisc_flush(tty); shutdown(info); + mutex_unlock(&info->port.mutex); tty_port_close_end(&info->port, tty); info->port.tty = NULL; @@ -741,17 +744,23 @@ cleanup: static void hangup(struct tty_struct *tty) { struct slgt_info *info = tty->driver_data; + unsigned long flags; if (sanity_check(info, tty->name, "hangup")) return; DBGINFO(("%s hangup\n", info->device_name)); flush_buffer(tty); + + mutex_lock(&info->port.mutex); shutdown(info); + spin_lock_irqsave(&info->port.lock, flags); info->port.count = 0; info->port.flags &= ~ASYNC_NORMAL_ACTIVE; info->port.tty = NULL; + spin_unlock_irqrestore(&info->port.lock, flags); + mutex_unlock(&info->port.mutex); wake_up_interruptible(&info->port.open_wait); } @@ -901,8 +910,6 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) * Note: use tight timings here to satisfy the NIST-PCTS. */ - lock_kernel(); - if (info->params.data_rate) { char_time = info->timeout/(32 * 5); if (!char_time) @@ -920,8 +927,6 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) if (timeout && time_after(jiffies, orig_jiffies + timeout)) break; } - unlock_kernel(); - exit: DBGINFO(("%s wait_until_sent exit\n", info->device_name)); } @@ -1041,8 +1046,37 @@ static int ioctl(struct tty_struct *tty, struct file *file, return -EIO; } - lock_kernel(); - + switch (cmd) { + case MGSL_IOCWAITEVENT: + return wait_mgsl_event(info, argp); + case TIOCMIWAIT: + return modem_input_wait(info,(int)arg); + case TIOCGICOUNT: + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock,flags); + p_cuser = argp; + if (put_user(cnow.cts, &p_cuser->cts) || + put_user(cnow.dsr, &p_cuser->dsr) || + put_user(cnow.rng, &p_cuser->rng) || + put_user(cnow.dcd, &p_cuser->dcd) || + put_user(cnow.rx, &p_cuser->rx) || + put_user(cnow.tx, &p_cuser->tx) || + put_user(cnow.frame, &p_cuser->frame) || + put_user(cnow.overrun, &p_cuser->overrun) || + put_user(cnow.parity, &p_cuser->parity) || + put_user(cnow.brk, &p_cuser->brk) || + put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) + return -EFAULT; + return 0; + case MGSL_IOCSGPIO: + return set_gpio(info, argp); + case MGSL_IOCGGPIO: + return get_gpio(info, argp); + case MGSL_IOCWAITGPIO: + return wait_gpio(info, argp); + } + mutex_lock(&info->port.mutex); switch (cmd) { case MGSL_IOCGPARAMS: ret = get_params(info, argp); @@ -1068,50 +1102,16 @@ static int ioctl(struct tty_struct *tty, struct file *file, case MGSL_IOCGSTATS: ret = get_stats(info, argp); break; - case MGSL_IOCWAITEVENT: - ret = wait_mgsl_event(info, argp); - break; - case TIOCMIWAIT: - ret = modem_input_wait(info,(int)arg); - break; case MGSL_IOCGIF: ret = get_interface(info, argp); break; case MGSL_IOCSIF: ret = set_interface(info,(int)arg); break; - case MGSL_IOCSGPIO: - ret = set_gpio(info, argp); - break; - case MGSL_IOCGGPIO: - ret = get_gpio(info, argp); - break; - case MGSL_IOCWAITGPIO: - ret = wait_gpio(info, argp); - break; - case TIOCGICOUNT: - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock,flags); - p_cuser = argp; - if (put_user(cnow.cts, &p_cuser->cts) || - put_user(cnow.dsr, &p_cuser->dsr) || - put_user(cnow.rng, &p_cuser->rng) || - put_user(cnow.dcd, &p_cuser->dcd) || - put_user(cnow.rx, &p_cuser->rx) || - put_user(cnow.tx, &p_cuser->tx) || - put_user(cnow.frame, &p_cuser->frame) || - put_user(cnow.overrun, &p_cuser->overrun) || - put_user(cnow.parity, &p_cuser->parity) || - put_user(cnow.brk, &p_cuser->brk) || - put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) - ret = -EFAULT; - ret = 0; - break; default: ret = -ENOIOCTLCMD; } - unlock_kernel(); + mutex_unlock(&info->port.mutex); return ret; } @@ -3244,7 +3244,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } DBGINFO(("%s block_til_ready wait\n", tty->driver->name)); + tty_unlock(); schedule(); + tty_lock(); } set_current_state(TASK_RUNNING); diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 2b18adc..e56caf7 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -52,7 +52,6 @@ #include <linux/mm.h> #include <linux/seq_file.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/netdevice.h> #include <linux/vmalloc.h> #include <linux/init.h> @@ -813,13 +812,15 @@ static void close(struct tty_struct *tty, struct file *filp) if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - + + mutex_lock(&info->port.mutex); if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); tty_ldisc_flush(tty); shutdown(info); + mutex_unlock(&info->port.mutex); tty_port_close_end(&info->port, tty); info->port.tty = NULL; @@ -835,6 +836,7 @@ cleanup: static void hangup(struct tty_struct *tty) { SLMP_INFO *info = tty->driver_data; + unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s hangup()\n", @@ -843,12 +845,16 @@ static void hangup(struct tty_struct *tty) if (sanity_check(info, tty->name, "hangup")) return; + mutex_lock(&info->port.mutex); flush_buffer(tty); shutdown(info); + spin_lock_irqsave(&info->port.lock, flags); info->port.count = 0; info->port.flags &= ~ASYNC_NORMAL_ACTIVE; info->port.tty = NULL; + spin_unlock_irqrestore(&info->port.lock, flags); + mutex_unlock(&info->port.mutex); wake_up_interruptible(&info->port.open_wait); } @@ -1062,9 +1068,7 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) if (sanity_check(info, tty->name, "wait_until_sent")) return; - lock_kernel(); - - if (!(info->port.flags & ASYNC_INITIALIZED)) + if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags)) goto exit; orig_jiffies = jiffies; @@ -1094,8 +1098,10 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) break; } } else { - //TODO: determine if there is something similar to USC16C32 - // TXSTATUS_ALL_SENT status + /* + * TODO: determine if there is something similar to USC16C32 + * TXSTATUS_ALL_SENT status + */ while ( info->tx_active && info->tx_enabled) { msleep_interruptible(jiffies_to_msecs(char_time)); if (signal_pending(current)) @@ -1106,7 +1112,6 @@ static void wait_until_sent(struct tty_struct *tty, int timeout) } exit: - unlock_kernel(); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s wait_until_sent() exit\n", __FILE__,__LINE__, info->device_name ); @@ -1122,7 +1127,6 @@ static int write_room(struct tty_struct *tty) if (sanity_check(info, tty->name, "write_room")) return 0; - lock_kernel(); if (info->params.mode == MGSL_MODE_HDLC) { ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; } else { @@ -1130,7 +1134,6 @@ static int write_room(struct tty_struct *tty) if (ret < 0) ret = 0; } - unlock_kernel(); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s write_room()=%d\n", @@ -1251,7 +1254,7 @@ static void tx_release(struct tty_struct *tty) * * Return Value: 0 if success, otherwise error code */ -static int do_ioctl(struct tty_struct *tty, struct file *file, +static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { SLMP_INFO *info = tty->driver_data; @@ -1341,16 +1344,6 @@ static int do_ioctl(struct tty_struct *tty, struct file *file, return 0; } -static int ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - int ret; - lock_kernel(); - ret = do_ioctl(tty, file, cmd, arg); - unlock_kernel(); - return ret; -} - /* * /proc fs routines.... */ @@ -2883,7 +2876,9 @@ static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount) if (!user_icount) { memset(&info->icount, 0, sizeof(info->icount)); } else { + mutex_lock(&info->port.mutex); COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); + mutex_unlock(&info->port.mutex); if (err) return -EFAULT; } @@ -2898,7 +2893,9 @@ static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params) printk("%s(%d):%s get_params()\n", __FILE__,__LINE__, info->device_name); + mutex_lock(&info->port.mutex); COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); + mutex_unlock(&info->port.mutex); if (err) { if ( debug_level >= DEBUG_LEVEL_INFO ) printk( "%s(%d):%s get_params() user buffer copy failed\n", @@ -2926,11 +2923,13 @@ static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params) return -EFAULT; } + mutex_lock(&info->port.mutex); spin_lock_irqsave(&info->lock,flags); memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); spin_unlock_irqrestore(&info->lock,flags); change_params(info); + mutex_unlock(&info->port.mutex); return 0; } @@ -3366,7 +3365,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, printk("%s(%d):%s block_til_ready() count=%d\n", __FILE__,__LINE__, tty->driver->name, port->count ); + tty_unlock(); schedule(); + tty_lock(); } set_current_state(TASK_RUNNING); diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 507441a..0350c42 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -149,6 +149,7 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd, #else #define tty_compat_ioctl NULL #endif +static int __tty_fasync(int fd, struct file *filp, int on); static int tty_fasync(int fd, struct file *filp, int on); static void release_tty(struct tty_struct *tty, int idx); static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty); @@ -470,7 +471,7 @@ void tty_wakeup(struct tty_struct *tty) EXPORT_SYMBOL_GPL(tty_wakeup); /** - * do_tty_hangup - actual handler for hangup events + * __tty_hangup - actual handler for hangup events * @work: tty device * * This can be called by the "eventd" kernel thread. That is process @@ -483,7 +484,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup); * remains intact. * * Locking: - * BKL + * BTM * redirect lock for undoing redirection * file list lock for manipulating list of ttys * tty_ldisc_lock from called functions @@ -491,10 +492,8 @@ EXPORT_SYMBOL_GPL(tty_wakeup); * tasklist_lock to walk task list for hangup event * ->siglock to protect ->signal/->sighand */ -static void do_tty_hangup(struct work_struct *work) +void __tty_hangup(struct tty_struct *tty) { - struct tty_struct *tty = - container_of(work, struct tty_struct, hangup_work); struct file *cons_filp = NULL; struct file *filp, *f = NULL; struct task_struct *p; @@ -513,9 +512,12 @@ static void do_tty_hangup(struct work_struct *work) } spin_unlock(&redirect_lock); - /* inuse_filps is protected by the single kernel lock */ - lock_kernel(); - check_tty_count(tty, "do_tty_hangup"); + tty_lock(); + + /* inuse_filps is protected by the single tty lock, + this really needs to change if we want to flush the + workqueue with the lock held */ + check_tty_count(tty, "tty_hangup"); file_list_lock(); /* This breaks for file handles being sent over AF_UNIX sockets ? */ @@ -525,7 +527,7 @@ static void do_tty_hangup(struct work_struct *work) if (filp->f_op->write != tty_write) continue; closecount++; - tty_fasync(-1, filp, 0); /* can't block */ + __tty_fasync(-1, filp, 0); /* can't block */ filp->f_op = &hung_up_tty_fops; } file_list_unlock(); @@ -594,11 +596,21 @@ static void do_tty_hangup(struct work_struct *work) */ set_bit(TTY_HUPPED, &tty->flags); tty_ldisc_enable(tty); - unlock_kernel(); + + tty_unlock(); + if (f) fput(f); } +static void do_tty_hangup(struct work_struct *work) +{ + struct tty_struct *tty = + container_of(work, struct tty_struct, hangup_work); + + __tty_hangup(tty); +} + /** * tty_hangup - trigger a hangup event * @tty: tty to hangup @@ -634,11 +646,12 @@ void tty_vhangup(struct tty_struct *tty) printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf)); #endif - do_tty_hangup(&tty->hangup_work); + __tty_hangup(tty); } EXPORT_SYMBOL(tty_vhangup); + /** * tty_vhangup_self - process vhangup for own ctty * @@ -696,7 +709,8 @@ static void session_clear_tty(struct pid *session) * exiting; it is 0 if called by the ioctl TIOCNOTTY. * * Locking: - * BKL is taken for hysterical raisins + * BTM is taken for hysterical raisins, and held when + * called from no_tty(). * tty_mutex is taken to protect tty * ->siglock is taken to protect ->signal/->sighand * tasklist_lock is taken to walk process list for sessions @@ -714,10 +728,10 @@ void disassociate_ctty(int on_exit) tty = get_current_tty(); if (tty) { tty_pgrp = get_pid(tty->pgrp); - lock_kernel(); - if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) - tty_vhangup(tty); - unlock_kernel(); + if (on_exit) { + if (tty->driver->type != TTY_DRIVER_TYPE_PTY) + tty_vhangup(tty); + } tty_kref_put(tty); } else if (on_exit) { struct pid *old_pgrp; @@ -774,9 +788,9 @@ void disassociate_ctty(int on_exit) void no_tty(void) { struct task_struct *tsk = current; - lock_kernel(); + tty_lock(); disassociate_ctty(0); - unlock_kernel(); + tty_unlock(); proc_clear_tty(tsk); } @@ -879,7 +893,7 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count, struct inode *inode; struct tty_ldisc *ld; - tty = (struct tty_struct *)file->private_data; + tty = file->private_data; inode = file->f_path.dentry->d_inode; if (tty_paranoia_check(tty, inode, "tty_read")) return -EIO; @@ -1013,19 +1027,19 @@ out: * We don't put it into the syslog queue right now maybe in the future if * really needed. * - * We must still hold the BKL and test the CLOSING flag for the moment. + * We must still hold the BTM and test the CLOSING flag for the moment. */ void tty_write_message(struct tty_struct *tty, char *msg) { if (tty) { mutex_lock(&tty->atomic_write_lock); - lock_kernel(); + tty_lock(); if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) { - unlock_kernel(); + tty_unlock(); tty->ops->write(tty, msg, strlen(msg)); } else - unlock_kernel(); + tty_unlock(); tty_write_unlock(tty); } return; @@ -1056,7 +1070,7 @@ static ssize_t tty_write(struct file *file, const char __user *buf, ssize_t ret; struct tty_ldisc *ld; - tty = (struct tty_struct *)file->private_data; + tty = file->private_data; if (tty_paranoia_check(tty, inode, "tty_write")) return -EIO; if (!tty || !tty->ops->write || @@ -1208,18 +1222,14 @@ static int tty_driver_install_tty(struct tty_driver *driver, int ret; if (driver->ops->install) { - lock_kernel(); ret = driver->ops->install(driver, tty); - unlock_kernel(); return ret; } if (tty_init_termios(tty) == 0) { - lock_kernel(); tty_driver_kref_get(driver); tty->count++; driver->ttys[idx] = tty; - unlock_kernel(); return 0; } return -ENOMEM; @@ -1312,14 +1322,11 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, struct tty_struct *tty; int retval; - lock_kernel(); /* Check if pty master is being opened multiple times */ if (driver->subtype == PTY_TYPE_MASTER && (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) { - unlock_kernel(); return ERR_PTR(-EIO); } - unlock_kernel(); /* * First time open is complex, especially for PTY devices. @@ -1363,9 +1370,7 @@ release_mem_out: if (printk_ratelimit()) printk(KERN_INFO "tty_init_dev: ldisc open failed, " "clearing slot %d\n", idx); - lock_kernel(); release_tty(tty, idx); - unlock_kernel(); return ERR_PTR(retval); } @@ -1508,14 +1513,14 @@ int tty_release(struct inode *inode, struct file *filp) int idx; char buf[64]; - tty = (struct tty_struct *)filp->private_data; + tty = filp->private_data; if (tty_paranoia_check(tty, inode, "tty_release_dev")) return 0; - lock_kernel(); + tty_lock(); check_tty_count(tty, "tty_release_dev"); - tty_fasync(-1, filp, 0); + __tty_fasync(-1, filp, 0); idx = tty->index; pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY && @@ -1527,18 +1532,18 @@ int tty_release(struct inode *inode, struct file *filp) if (idx < 0 || idx >= tty->driver->num) { printk(KERN_DEBUG "tty_release_dev: bad idx when trying to " "free (%s)\n", tty->name); - unlock_kernel(); + tty_unlock(); return 0; } if (!devpts) { if (tty != tty->driver->ttys[idx]) { - unlock_kernel(); + tty_unlock(); printk(KERN_DEBUG "tty_release_dev: driver.table[%d] not tty " "for (%s)\n", idx, tty->name); return 0; } if (tty->termios != tty->driver->termios[idx]) { - unlock_kernel(); + tty_unlock(); printk(KERN_DEBUG "tty_release_dev: driver.termios[%d] not termios " "for (%s)\n", idx, tty->name); @@ -1556,21 +1561,21 @@ int tty_release(struct inode *inode, struct file *filp) if (tty->driver->other && !(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) { if (o_tty != tty->driver->other->ttys[idx]) { - unlock_kernel(); + tty_unlock(); printk(KERN_DEBUG "tty_release_dev: other->table[%d] " "not o_tty for (%s)\n", idx, tty->name); return 0 ; } if (o_tty->termios != tty->driver->other->termios[idx]) { - unlock_kernel(); + tty_unlock(); printk(KERN_DEBUG "tty_release_dev: other->termios[%d] " "not o_termios for (%s)\n", idx, tty->name); return 0; } if (o_tty->link != tty) { - unlock_kernel(); + tty_unlock(); printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n"); return 0; } @@ -1579,7 +1584,7 @@ int tty_release(struct inode *inode, struct file *filp) if (tty->ops->close) tty->ops->close(tty, filp); - unlock_kernel(); + tty_unlock(); /* * Sanity check: if tty->count is going to zero, there shouldn't be * any waiters on tty->read_wait or tty->write_wait. We test the @@ -1602,7 +1607,7 @@ int tty_release(struct inode *inode, struct file *filp) opens on /dev/tty */ mutex_lock(&tty_mutex); - lock_kernel(); + tty_lock(); tty_closing = tty->count <= 1; o_tty_closing = o_tty && (o_tty->count <= (pty_master ? 1 : 0)); @@ -1633,7 +1638,7 @@ int tty_release(struct inode *inode, struct file *filp) printk(KERN_WARNING "tty_release_dev: %s: read/write wait queue " "active!\n", tty_name(tty, buf)); - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); schedule(); } @@ -1698,7 +1703,7 @@ int tty_release(struct inode *inode, struct file *filp) /* check whether both sides are closing ... */ if (!tty_closing || (o_tty && !o_tty_closing)) { - unlock_kernel(); + tty_unlock(); return 0; } @@ -1718,7 +1723,7 @@ int tty_release(struct inode *inode, struct file *filp) /* Make this pty number available for reallocation */ if (devpts) devpts_kill_index(inode, idx); - unlock_kernel(); + tty_unlock(); return 0; } @@ -1760,12 +1765,12 @@ retry_open: retval = 0; mutex_lock(&tty_mutex); - lock_kernel(); + tty_lock(); if (device == MKDEV(TTYAUX_MAJOR, 0)) { tty = get_current_tty(); if (!tty) { - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); return -ENXIO; } @@ -1797,14 +1802,14 @@ retry_open: goto got_driver; } } - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); return -ENODEV; } driver = get_tty_driver(device, &index); if (!driver) { - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); return -ENODEV; } @@ -1814,7 +1819,7 @@ got_driver: tty = tty_driver_lookup_tty(driver, inode, index); if (IS_ERR(tty)) { - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); return PTR_ERR(tty); } @@ -1830,7 +1835,7 @@ got_driver: mutex_unlock(&tty_mutex); tty_driver_kref_put(driver); if (IS_ERR(tty)) { - unlock_kernel(); + tty_unlock(); return PTR_ERR(tty); } @@ -1860,29 +1865,29 @@ got_driver: printk(KERN_DEBUG "error %d in opening %s...", retval, tty->name); #endif + tty_unlock(); /* need to call tty_release without BTM */ tty_release(inode, filp); - if (retval != -ERESTARTSYS) { - unlock_kernel(); + if (retval != -ERESTARTSYS) return retval; - } - if (signal_pending(current)) { - unlock_kernel(); + + if (signal_pending(current)) return retval; - } + schedule(); /* * Need to reset f_op in case a hangup happened. */ + tty_lock(); if (filp->f_op == &hung_up_tty_fops) filp->f_op = &tty_fops; - unlock_kernel(); + tty_unlock(); goto retry_open; } - unlock_kernel(); + tty_unlock(); mutex_lock(&tty_mutex); - lock_kernel(); + tty_lock(); spin_lock_irq(¤t->sighand->siglock); if (!noctty && current->signal->leader && @@ -1890,7 +1895,7 @@ got_driver: tty->session == NULL) __proc_set_tty(current, tty); spin_unlock_irq(¤t->sighand->siglock); - unlock_kernel(); + tty_unlock(); mutex_unlock(&tty_mutex); return 0; } @@ -1915,7 +1920,7 @@ static unsigned int tty_poll(struct file *filp, poll_table *wait) struct tty_ldisc *ld; int ret = 0; - tty = (struct tty_struct *)filp->private_data; + tty = filp->private_data; if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_poll")) return 0; @@ -1926,14 +1931,13 @@ static unsigned int tty_poll(struct file *filp, poll_table *wait) return ret; } -static int tty_fasync(int fd, struct file *filp, int on) +static int __tty_fasync(int fd, struct file *filp, int on) { struct tty_struct *tty; unsigned long flags; int retval = 0; - lock_kernel(); - tty = (struct tty_struct *)filp->private_data; + tty = filp->private_data; if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_fasync")) goto out; @@ -1966,7 +1970,15 @@ static int tty_fasync(int fd, struct file *filp, int on) } retval = 0; out: - unlock_kernel(); + return retval; +} + +static int tty_fasync(int fd, struct file *filp, int on) +{ + int retval; + tty_lock(); + retval = __tty_fasync(fd, filp, on); + tty_unlock(); return retval; } @@ -2485,7 +2497,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) struct tty_ldisc *ld; struct inode *inode = file->f_dentry->d_inode; - tty = (struct tty_struct *)file->private_data; + tty = file->private_data; if (tty_paranoia_check(tty, inode, "tty_ioctl")) return -EINVAL; diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 6bd5f88..0c18899 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -517,19 +517,25 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios) /* See if packet mode change of state. */ if (tty->link && tty->link->packet) { + int extproc = (old_termios.c_lflag & EXTPROC) | + (tty->termios->c_lflag & EXTPROC); int old_flow = ((old_termios.c_iflag & IXON) && (old_termios.c_cc[VSTOP] == '\023') && (old_termios.c_cc[VSTART] == '\021')); int new_flow = (I_IXON(tty) && STOP_CHAR(tty) == '\023' && START_CHAR(tty) == '\021'); - if (old_flow != new_flow) { + if ((old_flow != new_flow) || extproc) { spin_lock_irqsave(&tty->ctrl_lock, flags); - tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP); - if (new_flow) - tty->ctrl_status |= TIOCPKT_DOSTOP; - else - tty->ctrl_status |= TIOCPKT_NOSTOP; + if (old_flow != new_flow) { + tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP); + if (new_flow) + tty->ctrl_status |= TIOCPKT_DOSTOP; + else + tty->ctrl_status |= TIOCPKT_NOSTOP; + } + if (extproc) + tty->ctrl_status |= TIOCPKT_IOCTL; spin_unlock_irqrestore(&tty->ctrl_lock, flags); wake_up_interruptible(&tty->link->read_wait); } diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 500e740..412f977 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -440,6 +440,8 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) * * A helper opening method. Also a convenient debugging and check * point. + * + * Locking: always called with BTM already held. */ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) @@ -447,10 +449,9 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags)); if (ld->ops->open) { int ret; - /* BKL here locks verus a hangup event */ - lock_kernel(); + /* BTM here locks versus a hangup event */ + WARN_ON(!tty_locked()); ret = ld->ops->open(tty); - unlock_kernel(); return ret; } return 0; @@ -553,7 +554,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) if (IS_ERR(new_ldisc)) return PTR_ERR(new_ldisc); - lock_kernel(); + tty_lock(); /* * We need to look at the tty locking here for pty/tty pairs * when both sides try to change in parallel. @@ -567,12 +568,12 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) */ if (tty->ldisc->ops->num == ldisc) { - unlock_kernel(); + tty_unlock(); tty_ldisc_put(new_ldisc); return 0; } - unlock_kernel(); + tty_unlock(); /* * Problem: What do we do if this blocks ? * We could deadlock here @@ -580,6 +581,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_wait_until_sent(tty, 0); + tty_lock(); mutex_lock(&tty->ldisc_mutex); /* @@ -589,13 +591,13 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { mutex_unlock(&tty->ldisc_mutex); + tty_unlock(); wait_event(tty_ldisc_wait, test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0); + tty_lock(); mutex_lock(&tty->ldisc_mutex); } - lock_kernel(); - set_bit(TTY_LDISC_CHANGING, &tty->flags); /* @@ -607,7 +609,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) o_ldisc = tty->ldisc; - unlock_kernel(); + tty_unlock(); /* * Make sure we don't change while someone holds a * reference to the line discipline. The TTY_LDISC bit @@ -632,15 +634,15 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) flush_scheduled_work(); + tty_lock(); mutex_lock(&tty->ldisc_mutex); - lock_kernel(); if (test_bit(TTY_HUPPED, &tty->flags)) { /* We were raced by the hangup method. It will have stomped the ldisc data and closed the ldisc down */ clear_bit(TTY_LDISC_CHANGING, &tty->flags); mutex_unlock(&tty->ldisc_mutex); tty_ldisc_put(new_ldisc); - unlock_kernel(); + tty_unlock(); return -EIO; } @@ -682,7 +684,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) if (o_work) schedule_delayed_work(&o_tty->buf.work, 1); mutex_unlock(&tty->ldisc_mutex); - unlock_kernel(); + tty_unlock(); return retval; } @@ -780,7 +782,20 @@ void tty_ldisc_hangup(struct tty_struct *tty) * Avoid racing set_ldisc or tty_ldisc_release */ mutex_lock(&tty->ldisc_mutex); - tty_ldisc_halt(tty); + + /* + * this is like tty_ldisc_halt, but we need to give up + * the BTM before calling cancel_delayed_work_sync, + * which may need to wait for another function taking the BTM + */ + clear_bit(TTY_LDISC, &tty->flags); + tty_unlock(); + cancel_delayed_work_sync(&tty->buf.work); + mutex_unlock(&tty->ldisc_mutex); + + tty_lock(); + mutex_lock(&tty->ldisc_mutex); + /* At this point we have a closed ldisc and we want to reopen it. We could defer this to the next open but it means auditing a lot of other paths so this is @@ -851,8 +866,10 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) * race with the set_ldisc code path. */ + tty_unlock(); tty_ldisc_halt(tty); flush_scheduled_work(); + tty_lock(); mutex_lock(&tty->ldisc_mutex); /* diff --git a/drivers/char/tty_mutex.c b/drivers/char/tty_mutex.c new file mode 100644 index 0000000..1336975 --- /dev/null +++ b/drivers/char/tty_mutex.c @@ -0,0 +1,47 @@ +/* + * drivers/char/tty_lock.c + */ +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/kallsyms.h> +#include <linux/semaphore.h> +#include <linux/sched.h> + +/* + * The 'big tty mutex' + * + * This mutex is taken and released by tty_lock() and tty_unlock(), + * replacing the older big kernel lock. + * It can no longer be taken recursively, and does not get + * released implicitly while sleeping. + * + * Don't use in new code. + */ +static DEFINE_MUTEX(big_tty_mutex); +struct task_struct *__big_tty_mutex_owner; +EXPORT_SYMBOL_GPL(__big_tty_mutex_owner); + +/* + * Getting the big tty mutex. + */ +void __lockfunc tty_lock(void) +{ + struct task_struct *task = current; + + WARN_ON(__big_tty_mutex_owner == task); + + mutex_lock(&big_tty_mutex); + __big_tty_mutex_owner = task; +} +EXPORT_SYMBOL(tty_lock); + +void __lockfunc tty_unlock(void) +{ + struct task_struct *task = current; + + WARN_ON(__big_tty_mutex_owner != task); + __big_tty_mutex_owner = NULL; + + mutex_unlock(&big_tty_mutex); +} +EXPORT_SYMBOL(tty_unlock); diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index a3bd1d0..33d37d2 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -231,7 +231,7 @@ int tty_port_block_til_ready(struct tty_port *port, /* block if port is in the process of being closed */ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { - wait_event_interruptible(port->close_wait, + wait_event_interruptible_tty(port->close_wait, !(port->flags & ASYNC_CLOSING)); if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; @@ -294,7 +294,9 @@ int tty_port_block_til_ready(struct tty_port *port, retval = -ERESTARTSYS; break; } + tty_unlock(); schedule(); + tty_lock(); } finish_wait(&port->open_wait, &wait); diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c index c1791a6..bcce46c 100644 --- a/drivers/char/vc_screen.c +++ b/drivers/char/vc_screen.c @@ -463,10 +463,10 @@ vcs_open(struct inode *inode, struct file *filp) unsigned int currcons = iminor(inode) & 127; int ret = 0; - lock_kernel(); + tty_lock(); if(currcons && !vc_cons_allocated(currcons-1)) ret = -ENXIO; - unlock_kernel(); + tty_unlock(); return ret; } diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 4a9eb30..c734f9b 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -105,6 +105,7 @@ #include <asm/system.h> #include <linux/uaccess.h> #include <linux/kdb.h> +#include <linux/ctype.h> #define MAX_NR_CON_DRIVER 16 @@ -286,8 +287,12 @@ static inline unsigned short *screenpos(struct vc_data *vc, int offset, int view return p; } +/* Called from the keyboard irq path.. */ static inline void scrolldelta(int lines) { + /* FIXME */ + /* scrolldelta needs some kind of consistency lock, but the BKL was + and still is not protecting versus the scheduled back end */ scrollback_delta += lines; schedule_console_callback(); } @@ -704,7 +709,10 @@ void redraw_screen(struct vc_data *vc, int is_switch) update_attr(vc); clear_buffer_attributes(vc); } - if (update && vc->vc_mode != KD_GRAPHICS) + + /* Forcibly update if we're panicing */ + if ((update && vc->vc_mode != KD_GRAPHICS) || + vt_force_oops_output(vc)) do_update_region(vc, vc->vc_origin, vc->vc_screenbuf_size / 2); } set_cursor(vc); @@ -742,6 +750,7 @@ static void visual_init(struct vc_data *vc, int num, int init) vc->vc_hi_font_mask = 0; vc->vc_complement_mask = 0; vc->vc_can_do_color = 0; + vc->vc_panic_force_write = false; vc->vc_sw->con_init(vc, init); if (!vc->vc_complement_mask) vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800; @@ -774,6 +783,7 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ if (!vc) return -ENOMEM; vc_cons[currcons].d = vc; + tty_port_init(&vc->port); INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); visual_init(vc, currcons, 1); if (!*vc->vc_uni_pagedir_loc) @@ -837,9 +847,10 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, unsigned int cols, unsigned int lines) { unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0; + unsigned long end; unsigned int old_cols, old_rows, old_row_size, old_screen_size; unsigned int new_cols, new_rows, new_row_size, new_screen_size; - unsigned int end, user; + unsigned int user; unsigned short *newscreen; WARN_CONSOLE_UNLOCKED(); @@ -962,12 +973,12 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, * Resize a virtual console as seen from the console end of things. We * use the common vc_do_resize methods to update the structures. The * caller must hold the console sem to protect console internals and - * vc->vc_tty + * vc->port.tty */ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) { - return vc_do_resize(vc->vc_tty, vc, cols, rows); + return vc_do_resize(vc->port.tty, vc, cols, rows); } /** @@ -1795,8 +1806,8 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) vc->vc_state = ESnormal; return; case ESpalette: - if ( (c>='0'&&c<='9') || (c>='A'&&c<='F') || (c>='a'&&c<='f') ) { - vc->vc_par[vc->vc_npar++] = (c > '9' ? (c & 0xDF) - 'A' + 10 : c - '0'); + if (isxdigit(c)) { + vc->vc_par[vc->vc_npar++] = hex_to_bin(c); if (vc->vc_npar == 7) { int i = vc->vc_par[0] * 3, j = 1; vc->vc_palette[i] = 16 * vc->vc_par[j++]; @@ -2504,7 +2515,7 @@ static void vt_console_print(struct console *co, const char *b, unsigned count) goto quit; } - if (vc->vc_mode != KD_TEXT) + if (vc->vc_mode != KD_TEXT && !vt_force_oops_output(vc)) goto quit; /* undraw cursor first */ @@ -2610,8 +2621,6 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) return -EFAULT; ret = 0; - lock_kernel(); - switch (type) { case TIOCL_SETSEL: @@ -2686,7 +2695,6 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) ret = -EINVAL; break; } - unlock_kernel(); return ret; } @@ -2799,12 +2807,12 @@ static int con_open(struct tty_struct *tty, struct file *filp) struct vc_data *vc = vc_cons[currcons].d; /* Still being freed */ - if (vc->vc_tty) { + if (vc->port.tty) { release_console_sem(); return -ERESTARTSYS; } tty->driver_data = vc; - vc->vc_tty = tty; + vc->port.tty = tty; if (!tty->winsize.ws_row && !tty->winsize.ws_col) { tty->winsize.ws_row = vc_cons[currcons].d->vc_rows; @@ -2832,7 +2840,7 @@ static void con_shutdown(struct tty_struct *tty) struct vc_data *vc = tty->driver_data; BUG_ON(vc == NULL); acquire_console_sem(); - vc->vc_tty = NULL; + vc->port.tty = NULL; release_console_sem(); tty_shutdown(tty); } @@ -2914,6 +2922,7 @@ static int __init con_init(void) for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) { vc_cons[currcons].d = vc = kzalloc(sizeof(struct vc_data), GFP_NOWAIT); INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); + tty_port_init(&vc->port); visual_init(vc, currcons, 1); vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT); vc_init(vc, vc->vc_rows, vc->vc_cols, @@ -3065,7 +3074,8 @@ static int bind_con_driver(const struct consw *csw, int first, int last, old_was_color = vc->vc_can_do_color; vc->vc_sw->con_deinit(vc); - vc->vc_origin = (unsigned long)vc->vc_screenbuf; + if (!vc->vc_origin) + vc->vc_origin = (unsigned long)vc->vc_screenbuf; visual_init(vc, i, 0); set_origin(vc); update_attr(vc); @@ -3781,7 +3791,8 @@ void do_unblank_screen(int leaving_gfx) return; } vc = vc_cons[fg_console].d; - if (vc->vc_mode != KD_TEXT) + /* Try to unblank in oops case too */ + if (vc->vc_mode != KD_TEXT && !vt_force_oops_output(vc)) return; /* but leave console_blanked != 0 */ if (blankinterval) { @@ -3790,7 +3801,7 @@ void do_unblank_screen(int leaving_gfx) } console_blanked = 0; - if (vc->vc_sw->con_blank(vc, 0, leaving_gfx)) + if (vc->vc_sw->con_blank(vc, 0, leaving_gfx) || vt_force_oops_output(vc)) /* Low-level driver cannot restore -> do it ourselves */ update_screen(vc); if (console_blank_hook) diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index cb19dbc..2bbeaae 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -133,7 +133,7 @@ static void vt_event_wait(struct vt_event_wait *vw) list_add(&vw->list, &vt_events); spin_unlock_irqrestore(&vt_event_lock, flags); /* Wait for it to pass */ - wait_event_interruptible(vt_event_waitqueue, vw->done); + wait_event_interruptible_tty(vt_event_waitqueue, vw->done); /* Dequeue it */ spin_lock_irqsave(&vt_event_lock, flags); list_del(&vw->list); @@ -509,7 +509,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, console = vc->vc_num; - lock_kernel(); + tty_lock(); if (!vc_cons_allocated(console)) { /* impossible? */ ret = -ENOIOCTLCMD; @@ -1336,7 +1336,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, ret = -ENOIOCTLCMD; } out: - unlock_kernel(); + tty_unlock(); return ret; eperm: ret = -EPERM; @@ -1369,7 +1369,7 @@ void vc_SAK(struct work_struct *work) acquire_console_sem(); vc = vc_con->d; if (vc) { - tty = vc->vc_tty; + tty = vc->port.tty; /* * SAK should also work in all raw modes and reset * them properly. @@ -1503,7 +1503,7 @@ long vt_compat_ioctl(struct tty_struct *tty, struct file * file, console = vc->vc_num; - lock_kernel(); + tty_lock(); if (!vc_cons_allocated(console)) { /* impossible? */ ret = -ENOIOCTLCMD; @@ -1571,11 +1571,11 @@ long vt_compat_ioctl(struct tty_struct *tty, struct file * file, goto fallback; } out: - unlock_kernel(); + tty_unlock(); return ret; fallback: - unlock_kernel(); + tty_unlock(); return vt_ioctl(tty, file, cmd, arg); } @@ -1761,10 +1761,13 @@ int vt_move_to_console(unsigned int vt, int alloc) return -EIO; } release_console_sem(); + tty_lock(); if (vt_waitactive(vt + 1)) { pr_debug("Suspend: Can't switch VCs."); + tty_unlock(); return -EINTR; } + tty_unlock(); return prev; } diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index dbefe15..a507108 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -74,6 +74,17 @@ static void cpuidle_idle_call(void) */ hrtimer_peek_ahead_timers(); #endif + + /* + * Call the device's prepare function before calling the + * governor's select function. ->prepare gives the device's + * cpuidle driver a chance to update any dynamic information + * of its cpuidle states for the current idle period, e.g. + * state availability, latencies, residencies, etc. + */ + if (dev->prepare) + dev->prepare(dev); + /* ask the governor for the next state */ next_state = cpuidle_curr_governor->select(dev); if (need_resched()) { @@ -282,6 +293,26 @@ static int __cpuidle_register_device(struct cpuidle_device *dev) poll_idle_init(dev); + /* + * cpuidle driver should set the dev->power_specified bit + * before registering the device if the driver provides + * power_usage numbers. + * + * For those devices whose ->power_specified is not set, + * we fill in power_usage with decreasing values as the + * cpuidle code has an implicit assumption that state Cn + * uses less power than C(n-1). + * + * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned + * an power value of -1. So we use -2, -3, etc, for other + * c-states. + */ + if (!dev->power_specified) { + int i; + for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++) + dev->states[i].power_usage = -1 - i; + } + per_cpu(cpuidle_devices, dev->cpu) = dev; list_add(&dev->device_list, &cpuidle_detected_devices); if ((ret = cpuidle_add_sysfs(sys_dev))) { diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index 1b128702..c2408bb 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -234,6 +234,7 @@ static int menu_select(struct cpuidle_device *dev) { struct menu_device *data = &__get_cpu_var(menu_devices); int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY); + unsigned int power_usage = -1; int i; int multiplier; @@ -278,19 +279,27 @@ static int menu_select(struct cpuidle_device *dev) if (data->expected_us > 5) data->last_state_idx = CPUIDLE_DRIVER_STATE_START; - - /* find the deepest idle state that satisfies our constraints */ + /* + * Find the idle state with the lowest power while satisfying + * our constraints. + */ for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++) { struct cpuidle_state *s = &dev->states[i]; + if (s->flags & CPUIDLE_FLAG_IGNORE) + continue; if (s->target_residency > data->predicted_us) - break; + continue; if (s->exit_latency > latency_req) - break; + continue; if (s->exit_latency * multiplier > data->predicted_us) - break; - data->exit_us = s->exit_latency; - data->last_state_idx = i; + continue; + + if (s->power_usage < power_usage) { + power_usage = s->power_usage; + data->last_state_idx = i; + data->exit_us = s->exit_latency; + } } return data->last_state_idx; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 9e01e96..fed5763 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -33,6 +33,19 @@ if DMADEVICES comment "DMA Devices" +config INTEL_MID_DMAC + tristate "Intel MID DMA support for Peripheral DMA controllers" + depends on PCI && X86 + select DMA_ENGINE + default n + help + Enable support for the Intel(R) MID DMA engine present + in Intel MID chipsets. + + Say Y here if you have such a chipset. + + If unsure, say N. + config ASYNC_TX_DISABLE_CHANNEL_SWITCH bool @@ -175,6 +188,13 @@ config PL330_DMA You need to provide platform specific settings via platform_data for a dma-pl330 device. +config PCH_DMA + tristate "Topcliff PCH DMA support" + depends on PCI && X86 + select DMA_ENGINE + help + Enable support for the Topcliff PCH DMA engine. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 0fe5ebb..72bd703 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -7,6 +7,7 @@ endif obj-$(CONFIG_DMA_ENGINE) += dmaengine.o obj-$(CONFIG_NET_DMA) += iovlock.o +obj-$(CONFIG_INTEL_MID_DMAC) += intel_mid_dma.o obj-$(CONFIG_DMATEST) += dmatest.o obj-$(CONFIG_INTEL_IOATDMA) += ioat/ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o @@ -23,3 +24,4 @@ obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/ obj-$(CONFIG_TIMB_DMA) += timb_dma.o obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o obj-$(CONFIG_PL330_DMA) += pl330.o +obj-$(CONFIG_PCH_DMA) += pch_dma.o diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index e880760..a0f3e6a0 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -790,12 +790,12 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, list_splice_init(&atchan->queue, &list); list_splice_init(&atchan->active_list, &list); - spin_unlock_bh(&atchan->lock); - /* Flush all pending and queued descriptors */ list_for_each_entry_safe(desc, _desc, &list, desc_node) atc_chain_complete(atchan, desc); + spin_unlock_bh(&atchan->lock); + return 0; } diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index a724e6b..557e227 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -72,6 +72,9 @@ struct coh901318_chan { unsigned long nbr_active_done; unsigned long busy; + u32 runtime_addr; + u32 runtime_ctrl; + struct coh901318_base *base; }; @@ -190,6 +193,9 @@ static inline struct coh901318_chan *to_coh901318_chan(struct dma_chan *chan) static inline dma_addr_t cohc_dev_addr(struct coh901318_chan *cohc) { + /* Runtime supplied address will take precedence */ + if (cohc->runtime_addr) + return cohc->runtime_addr; return cohc->base->platform->chan_conf[cohc->id].dev_addr; } @@ -1055,6 +1061,14 @@ coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, params = cohc_chan_param(cohc); config = params->config; + /* + * Add runtime-specific control on top, make + * sure the bits you set per peripheral channel are + * cleared in the default config from the platform. + */ + ctrl_chained |= cohc->runtime_ctrl; + ctrl_last |= cohc->runtime_ctrl; + ctrl |= cohc->runtime_ctrl; if (direction == DMA_TO_DEVICE) { u32 tx_flags = COH901318_CX_CTRL_PRDD_SOURCE | @@ -1113,6 +1127,12 @@ coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, if (ret) goto err_lli_fill; + /* + * Set the default ctrl for the channel to the one from the lli, + * things may have changed due to odd buffer alignment etc. + */ + coh901318_set_ctrl(cohc, lli->control); + COH_DBG(coh901318_list_print(cohc, lli)); /* Pick a descriptor to handle this transfer */ @@ -1175,6 +1195,146 @@ coh901318_issue_pending(struct dma_chan *chan) spin_unlock_irqrestore(&cohc->lock, flags); } +/* + * Here we wrap in the runtime dma control interface + */ +struct burst_table { + int burst_8bit; + int burst_16bit; + int burst_32bit; + u32 reg; +}; + +static const struct burst_table burst_sizes[] = { + { + .burst_8bit = 64, + .burst_16bit = 32, + .burst_32bit = 16, + .reg = COH901318_CX_CTRL_BURST_COUNT_64_BYTES, + }, + { + .burst_8bit = 48, + .burst_16bit = 24, + .burst_32bit = 12, + .reg = COH901318_CX_CTRL_BURST_COUNT_48_BYTES, + }, + { + .burst_8bit = 32, + .burst_16bit = 16, + .burst_32bit = 8, + .reg = COH901318_CX_CTRL_BURST_COUNT_32_BYTES, + }, + { + .burst_8bit = 16, + .burst_16bit = 8, + .burst_32bit = 4, + .reg = COH901318_CX_CTRL_BURST_COUNT_16_BYTES, + }, + { + .burst_8bit = 8, + .burst_16bit = 4, + .burst_32bit = 2, + .reg = COH901318_CX_CTRL_BURST_COUNT_8_BYTES, + }, + { + .burst_8bit = 4, + .burst_16bit = 2, + .burst_32bit = 1, + .reg = COH901318_CX_CTRL_BURST_COUNT_4_BYTES, + }, + { + .burst_8bit = 2, + .burst_16bit = 1, + .burst_32bit = 0, + .reg = COH901318_CX_CTRL_BURST_COUNT_2_BYTES, + }, + { + .burst_8bit = 1, + .burst_16bit = 0, + .burst_32bit = 0, + .reg = COH901318_CX_CTRL_BURST_COUNT_1_BYTE, + }, +}; + +static void coh901318_dma_set_runtimeconfig(struct dma_chan *chan, + struct dma_slave_config *config) +{ + struct coh901318_chan *cohc = to_coh901318_chan(chan); + dma_addr_t addr; + enum dma_slave_buswidth addr_width; + u32 maxburst; + u32 runtime_ctrl = 0; + int i = 0; + + /* We only support mem to per or per to mem transfers */ + if (config->direction == DMA_FROM_DEVICE) { + addr = config->src_addr; + addr_width = config->src_addr_width; + maxburst = config->src_maxburst; + } else if (config->direction == DMA_TO_DEVICE) { + addr = config->dst_addr; + addr_width = config->dst_addr_width; + maxburst = config->dst_maxburst; + } else { + dev_err(COHC_2_DEV(cohc), "illegal channel mode\n"); + return; + } + + dev_dbg(COHC_2_DEV(cohc), "configure channel for %d byte transfers\n", + addr_width); + switch (addr_width) { + case DMA_SLAVE_BUSWIDTH_1_BYTE: + runtime_ctrl |= + COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS | + COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS; + + while (i < ARRAY_SIZE(burst_sizes)) { + if (burst_sizes[i].burst_8bit <= maxburst) + break; + i++; + } + + break; + case DMA_SLAVE_BUSWIDTH_2_BYTES: + runtime_ctrl |= + COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS | + COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS; + + while (i < ARRAY_SIZE(burst_sizes)) { + if (burst_sizes[i].burst_16bit <= maxburst) + break; + i++; + } + + break; + case DMA_SLAVE_BUSWIDTH_4_BYTES: + /* Direction doesn't matter here, it's 32/32 bits */ + runtime_ctrl |= + COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | + COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS; + + while (i < ARRAY_SIZE(burst_sizes)) { + if (burst_sizes[i].burst_32bit <= maxburst) + break; + i++; + } + + break; + default: + dev_err(COHC_2_DEV(cohc), + "bad runtimeconfig: alien address width\n"); + return; + } + + runtime_ctrl |= burst_sizes[i].reg; + dev_dbg(COHC_2_DEV(cohc), + "selected burst size %d bytes for address width %d bytes, maxburst %d\n", + burst_sizes[i].burst_8bit, addr_width, maxburst); + + cohc->runtime_addr = addr; + cohc->runtime_ctrl = runtime_ctrl; +} + static int coh901318_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg) @@ -1184,6 +1344,14 @@ coh901318_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, struct coh901318_desc *cohd; void __iomem *virtbase = cohc->base->virtbase; + if (cmd == DMA_SLAVE_CONFIG) { + struct dma_slave_config *config = + (struct dma_slave_config *) arg; + + coh901318_dma_set_runtimeconfig(chan, config); + return 0; + } + if (cmd == DMA_PAUSE) { coh901318_pause(chan); return 0; @@ -1240,6 +1408,7 @@ coh901318_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, return 0; } + void coh901318_base_init(struct dma_device *dma, const int *pick_chans, struct coh901318_base *base) { diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 68d58c4..5589358 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -540,7 +540,7 @@ static int dmatest_add_channel(struct dma_chan *chan) struct dmatest_chan *dtc; struct dma_device *dma_dev = chan->device; unsigned int thread_count = 0; - unsigned int cnt; + int cnt; dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL); if (!dtc) { diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c new file mode 100644 index 0000000..c2591e8 --- /dev/null +++ b/drivers/dma/intel_mid_dma.c @@ -0,0 +1,1143 @@ +/* + * intel_mid_dma.c - Intel Langwell DMA Drivers + * + * Copyright (C) 2008-10 Intel Corp + * Author: Vinod Koul <vinod.koul@intel.com> + * The driver design is based on dw_dmac driver + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * + */ +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/intel_mid_dma.h> + +#define MAX_CHAN 4 /*max ch across controllers*/ +#include "intel_mid_dma_regs.h" + +#define INTEL_MID_DMAC1_ID 0x0814 +#define INTEL_MID_DMAC2_ID 0x0813 +#define INTEL_MID_GP_DMAC2_ID 0x0827 +#define INTEL_MFLD_DMAC1_ID 0x0830 +#define LNW_PERIPHRAL_MASK_BASE 0xFFAE8008 +#define LNW_PERIPHRAL_MASK_SIZE 0x10 +#define LNW_PERIPHRAL_STATUS 0x0 +#define LNW_PERIPHRAL_MASK 0x8 + +struct intel_mid_dma_probe_info { + u8 max_chan; + u8 ch_base; + u16 block_size; + u32 pimr_mask; +}; + +#define INFO(_max_chan, _ch_base, _block_size, _pimr_mask) \ + ((kernel_ulong_t)&(struct intel_mid_dma_probe_info) { \ + .max_chan = (_max_chan), \ + .ch_base = (_ch_base), \ + .block_size = (_block_size), \ + .pimr_mask = (_pimr_mask), \ + }) + +/***************************************************************************** +Utility Functions*/ +/** + * get_ch_index - convert status to channel + * @status: status mask + * @base: dma ch base value + * + * Modify the status mask and return the channel index needing + * attention (or -1 if neither) + */ +static int get_ch_index(int *status, unsigned int base) +{ + int i; + for (i = 0; i < MAX_CHAN; i++) { + if (*status & (1 << (i + base))) { + *status = *status & ~(1 << (i + base)); + pr_debug("MDMA: index %d New status %x\n", i, *status); + return i; + } + } + return -1; +} + +/** + * get_block_ts - calculates dma transaction length + * @len: dma transfer length + * @tx_width: dma transfer src width + * @block_size: dma controller max block size + * + * Based on src width calculate the DMA trsaction length in data items + * return data items or FFFF if exceeds max length for block + */ +static int get_block_ts(int len, int tx_width, int block_size) +{ + int byte_width = 0, block_ts = 0; + + switch (tx_width) { + case LNW_DMA_WIDTH_8BIT: + byte_width = 1; + break; + case LNW_DMA_WIDTH_16BIT: + byte_width = 2; + break; + case LNW_DMA_WIDTH_32BIT: + default: + byte_width = 4; + break; + } + + block_ts = len/byte_width; + if (block_ts > block_size) + block_ts = 0xFFFF; + return block_ts; +} + +/***************************************************************************** +DMAC1 interrupt Functions*/ + +/** + * dmac1_mask_periphral_intr - mask the periphral interrupt + * @midc: dma channel for which masking is required + * + * Masks the DMA periphral interrupt + * this is valid for DMAC1 family controllers only + * This controller should have periphral mask registers already mapped + */ +static void dmac1_mask_periphral_intr(struct intel_mid_dma_chan *midc) +{ + u32 pimr; + struct middma_device *mid = to_middma_device(midc->chan.device); + + if (mid->pimr_mask) { + pimr = readl(mid->mask_reg + LNW_PERIPHRAL_MASK); + pimr |= mid->pimr_mask; + writel(pimr, mid->mask_reg + LNW_PERIPHRAL_MASK); + } + return; +} + +/** + * dmac1_unmask_periphral_intr - unmask the periphral interrupt + * @midc: dma channel for which masking is required + * + * UnMasks the DMA periphral interrupt, + * this is valid for DMAC1 family controllers only + * This controller should have periphral mask registers already mapped + */ +static void dmac1_unmask_periphral_intr(struct intel_mid_dma_chan *midc) +{ + u32 pimr; + struct middma_device *mid = to_middma_device(midc->chan.device); + + if (mid->pimr_mask) { + pimr = readl(mid->mask_reg + LNW_PERIPHRAL_MASK); + pimr &= ~mid->pimr_mask; + writel(pimr, mid->mask_reg + LNW_PERIPHRAL_MASK); + } + return; +} + +/** + * enable_dma_interrupt - enable the periphral interrupt + * @midc: dma channel for which enable interrupt is required + * + * Enable the DMA periphral interrupt, + * this is valid for DMAC1 family controllers only + * This controller should have periphral mask registers already mapped + */ +static void enable_dma_interrupt(struct intel_mid_dma_chan *midc) +{ + dmac1_unmask_periphral_intr(midc); + + /*en ch interrupts*/ + iowrite32(UNMASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_TFR); + iowrite32(UNMASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_ERR); + return; +} + +/** + * disable_dma_interrupt - disable the periphral interrupt + * @midc: dma channel for which disable interrupt is required + * + * Disable the DMA periphral interrupt, + * this is valid for DMAC1 family controllers only + * This controller should have periphral mask registers already mapped + */ +static void disable_dma_interrupt(struct intel_mid_dma_chan *midc) +{ + /*Check LPE PISR, make sure fwd is disabled*/ + dmac1_mask_periphral_intr(midc); + iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_BLOCK); + iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_TFR); + iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_ERR); + return; +} + +/***************************************************************************** +DMA channel helper Functions*/ +/** + * mid_desc_get - get a descriptor + * @midc: dma channel for which descriptor is required + * + * Obtain a descriptor for the channel. Returns NULL if none are free. + * Once the descriptor is returned it is private until put on another + * list or freed + */ +static struct intel_mid_dma_desc *midc_desc_get(struct intel_mid_dma_chan *midc) +{ + struct intel_mid_dma_desc *desc, *_desc; + struct intel_mid_dma_desc *ret = NULL; + + spin_lock_bh(&midc->lock); + list_for_each_entry_safe(desc, _desc, &midc->free_list, desc_node) { + if (async_tx_test_ack(&desc->txd)) { + list_del(&desc->desc_node); + ret = desc; + break; + } + } + spin_unlock_bh(&midc->lock); + return ret; +} + +/** + * mid_desc_put - put a descriptor + * @midc: dma channel for which descriptor is required + * @desc: descriptor to put + * + * Return a descriptor from lwn_desc_get back to the free pool + */ +static void midc_desc_put(struct intel_mid_dma_chan *midc, + struct intel_mid_dma_desc *desc) +{ + if (desc) { + spin_lock_bh(&midc->lock); + list_add_tail(&desc->desc_node, &midc->free_list); + spin_unlock_bh(&midc->lock); + } +} +/** + * midc_dostart - begin a DMA transaction + * @midc: channel for which txn is to be started + * @first: first descriptor of series + * + * Load a transaction into the engine. This must be called with midc->lock + * held and bh disabled. + */ +static void midc_dostart(struct intel_mid_dma_chan *midc, + struct intel_mid_dma_desc *first) +{ + struct middma_device *mid = to_middma_device(midc->chan.device); + + /* channel is idle */ + if (midc->in_use && test_ch_en(midc->dma_base, midc->ch_id)) { + /*error*/ + pr_err("ERR_MDMA: channel is busy in start\n"); + /* The tasklet will hopefully advance the queue... */ + return; + } + + /*write registers and en*/ + iowrite32(first->sar, midc->ch_regs + SAR); + iowrite32(first->dar, midc->ch_regs + DAR); + iowrite32(first->cfg_hi, midc->ch_regs + CFG_HIGH); + iowrite32(first->cfg_lo, midc->ch_regs + CFG_LOW); + iowrite32(first->ctl_lo, midc->ch_regs + CTL_LOW); + iowrite32(first->ctl_hi, midc->ch_regs + CTL_HIGH); + pr_debug("MDMA:TX SAR %x,DAR %x,CFGL %x,CFGH %x,CTLH %x, CTLL %x\n", + (int)first->sar, (int)first->dar, first->cfg_hi, + first->cfg_lo, first->ctl_hi, first->ctl_lo); + + iowrite32(ENABLE_CHANNEL(midc->ch_id), mid->dma_base + DMA_CHAN_EN); + first->status = DMA_IN_PROGRESS; +} + +/** + * midc_descriptor_complete - process completed descriptor + * @midc: channel owning the descriptor + * @desc: the descriptor itself + * + * Process a completed descriptor and perform any callbacks upon + * the completion. The completion handling drops the lock during the + * callbacks but must be called with the lock held. + */ +static void midc_descriptor_complete(struct intel_mid_dma_chan *midc, + struct intel_mid_dma_desc *desc) +{ + struct dma_async_tx_descriptor *txd = &desc->txd; + dma_async_tx_callback callback_txd = NULL; + void *param_txd = NULL; + + midc->completed = txd->cookie; + callback_txd = txd->callback; + param_txd = txd->callback_param; + + list_move(&desc->desc_node, &midc->free_list); + + spin_unlock_bh(&midc->lock); + if (callback_txd) { + pr_debug("MDMA: TXD callback set ... calling\n"); + callback_txd(param_txd); + spin_lock_bh(&midc->lock); + return; + } + spin_lock_bh(&midc->lock); + +} +/** + * midc_scan_descriptors - check the descriptors in channel + * mark completed when tx is completete + * @mid: device + * @midc: channel to scan + * + * Walk the descriptor chain for the device and process any entries + * that are complete. + */ +static void midc_scan_descriptors(struct middma_device *mid, + struct intel_mid_dma_chan *midc) +{ + struct intel_mid_dma_desc *desc = NULL, *_desc = NULL; + + /*tx is complete*/ + list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) { + if (desc->status == DMA_IN_PROGRESS) { + desc->status = DMA_SUCCESS; + midc_descriptor_complete(midc, desc); + } + } + return; +} + +/***************************************************************************** +DMA engine callback Functions*/ +/** + * intel_mid_dma_tx_submit - callback to submit DMA transaction + * @tx: dma engine descriptor + * + * Submit the DMA trasaction for this descriptor, start if ch idle + */ +static dma_cookie_t intel_mid_dma_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct intel_mid_dma_desc *desc = to_intel_mid_dma_desc(tx); + struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(tx->chan); + dma_cookie_t cookie; + + spin_lock_bh(&midc->lock); + cookie = midc->chan.cookie; + + if (++cookie < 0) + cookie = 1; + + midc->chan.cookie = cookie; + desc->txd.cookie = cookie; + + + if (list_empty(&midc->active_list)) { + midc_dostart(midc, desc); + list_add_tail(&desc->desc_node, &midc->active_list); + } else { + list_add_tail(&desc->desc_node, &midc->queue); + } + spin_unlock_bh(&midc->lock); + + return cookie; +} + +/** + * intel_mid_dma_issue_pending - callback to issue pending txn + * @chan: chan where pending trascation needs to be checked and submitted + * + * Call for scan to issue pending descriptors + */ +static void intel_mid_dma_issue_pending(struct dma_chan *chan) +{ + struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); + + spin_lock_bh(&midc->lock); + if (!list_empty(&midc->queue)) + midc_scan_descriptors(to_middma_device(chan->device), midc); + spin_unlock_bh(&midc->lock); +} + +/** + * intel_mid_dma_tx_status - Return status of txn + * @chan: chan for where status needs to be checked + * @cookie: cookie for txn + * @txstate: DMA txn state + * + * Return status of DMA txn + */ +static enum dma_status intel_mid_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, + struct dma_tx_state *txstate) +{ + struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); + dma_cookie_t last_used; + dma_cookie_t last_complete; + int ret; + + last_complete = midc->completed; + last_used = chan->cookie; + + ret = dma_async_is_complete(cookie, last_complete, last_used); + if (ret != DMA_SUCCESS) { + midc_scan_descriptors(to_middma_device(chan->device), midc); + + last_complete = midc->completed; + last_used = chan->cookie; + + ret = dma_async_is_complete(cookie, last_complete, last_used); + } + + if (txstate) { + txstate->last = last_complete; + txstate->used = last_used; + txstate->residue = 0; + } + return ret; +} + +/** + * intel_mid_dma_device_control - DMA device control + * @chan: chan for DMA control + * @cmd: control cmd + * @arg: cmd arg value + * + * Perform DMA control command + */ +static int intel_mid_dma_device_control(struct dma_chan *chan, + enum dma_ctrl_cmd cmd, unsigned long arg) +{ + struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); + struct middma_device *mid = to_middma_device(chan->device); + struct intel_mid_dma_desc *desc, *_desc; + LIST_HEAD(list); + + if (cmd != DMA_TERMINATE_ALL) + return -ENXIO; + + spin_lock_bh(&midc->lock); + if (midc->in_use == false) { + spin_unlock_bh(&midc->lock); + return 0; + } + list_splice_init(&midc->free_list, &list); + midc->descs_allocated = 0; + midc->slave = NULL; + + /* Disable interrupts */ + disable_dma_interrupt(midc); + + spin_unlock_bh(&midc->lock); + list_for_each_entry_safe(desc, _desc, &list, desc_node) { + pr_debug("MDMA: freeing descriptor %p\n", desc); + pci_pool_free(mid->dma_pool, desc, desc->txd.phys); + } + return 0; +} + +/** + * intel_mid_dma_prep_slave_sg - Prep slave sg txn + * @chan: chan for DMA transfer + * @sgl: scatter gather list + * @sg_len: length of sg txn + * @direction: DMA transfer dirtn + * @flags: DMA flags + * + * Do DMA sg txn: NOT supported now + */ +static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_data_direction direction, + unsigned long flags) +{ + /*not supported now*/ + return NULL; +} + +/** + * intel_mid_dma_prep_memcpy - Prep memcpy txn + * @chan: chan for DMA transfer + * @dest: destn address + * @src: src address + * @len: DMA transfer len + * @flags: DMA flags + * + * Perform a DMA memcpy. Note we support slave periphral DMA transfers only + * The periphral txn details should be filled in slave structure properly + * Returns the descriptor for this txn + */ +static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy( + struct dma_chan *chan, dma_addr_t dest, + dma_addr_t src, size_t len, unsigned long flags) +{ + struct intel_mid_dma_chan *midc; + struct intel_mid_dma_desc *desc = NULL; + struct intel_mid_dma_slave *mids; + union intel_mid_dma_ctl_lo ctl_lo; + union intel_mid_dma_ctl_hi ctl_hi; + union intel_mid_dma_cfg_lo cfg_lo; + union intel_mid_dma_cfg_hi cfg_hi; + enum intel_mid_dma_width width = 0; + + pr_debug("MDMA: Prep for memcpy\n"); + WARN_ON(!chan); + if (!len) + return NULL; + + mids = chan->private; + WARN_ON(!mids); + + midc = to_intel_mid_dma_chan(chan); + WARN_ON(!midc); + + pr_debug("MDMA:called for DMA %x CH %d Length %zu\n", + midc->dma->pci_id, midc->ch_id, len); + pr_debug("MDMA:Cfg passed Mode %x, Dirn %x, HS %x, Width %x\n", + mids->cfg_mode, mids->dirn, mids->hs_mode, mids->src_width); + + /*calculate CFG_LO*/ + if (mids->hs_mode == LNW_DMA_SW_HS) { + cfg_lo.cfg_lo = 0; + cfg_lo.cfgx.hs_sel_dst = 1; + cfg_lo.cfgx.hs_sel_src = 1; + } else if (mids->hs_mode == LNW_DMA_HW_HS) + cfg_lo.cfg_lo = 0x00000; + + /*calculate CFG_HI*/ + if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) { + /*SW HS only*/ + cfg_hi.cfg_hi = 0; + } else { + cfg_hi.cfg_hi = 0; + if (midc->dma->pimr_mask) { + cfg_hi.cfgx.protctl = 0x0; /*default value*/ + cfg_hi.cfgx.fifo_mode = 1; + if (mids->dirn == DMA_TO_DEVICE) { + cfg_hi.cfgx.src_per = 0; + if (mids->device_instance == 0) + cfg_hi.cfgx.dst_per = 3; + if (mids->device_instance == 1) + cfg_hi.cfgx.dst_per = 1; + } else if (mids->dirn == DMA_FROM_DEVICE) { + if (mids->device_instance == 0) + cfg_hi.cfgx.src_per = 2; + if (mids->device_instance == 1) + cfg_hi.cfgx.src_per = 0; + cfg_hi.cfgx.dst_per = 0; + } + } else { + cfg_hi.cfgx.protctl = 0x1; /*default value*/ + cfg_hi.cfgx.src_per = cfg_hi.cfgx.dst_per = + midc->ch_id - midc->dma->chan_base; + } + } + + /*calculate CTL_HI*/ + ctl_hi.ctlx.reser = 0; + width = mids->src_width; + + ctl_hi.ctlx.block_ts = get_block_ts(len, width, midc->dma->block_size); + pr_debug("MDMA:calc len %d for block size %d\n", + ctl_hi.ctlx.block_ts, midc->dma->block_size); + /*calculate CTL_LO*/ + ctl_lo.ctl_lo = 0; + ctl_lo.ctlx.int_en = 1; + ctl_lo.ctlx.dst_tr_width = mids->dst_width; + ctl_lo.ctlx.src_tr_width = mids->src_width; + ctl_lo.ctlx.dst_msize = mids->src_msize; + ctl_lo.ctlx.src_msize = mids->dst_msize; + + if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) { + ctl_lo.ctlx.tt_fc = 0; + ctl_lo.ctlx.sinc = 0; + ctl_lo.ctlx.dinc = 0; + } else { + if (mids->dirn == DMA_TO_DEVICE) { + ctl_lo.ctlx.sinc = 0; + ctl_lo.ctlx.dinc = 2; + ctl_lo.ctlx.tt_fc = 1; + } else if (mids->dirn == DMA_FROM_DEVICE) { + ctl_lo.ctlx.sinc = 2; + ctl_lo.ctlx.dinc = 0; + ctl_lo.ctlx.tt_fc = 2; + } + } + + pr_debug("MDMA:Calc CTL LO %x, CTL HI %x, CFG LO %x, CFG HI %x\n", + ctl_lo.ctl_lo, ctl_hi.ctl_hi, cfg_lo.cfg_lo, cfg_hi.cfg_hi); + + enable_dma_interrupt(midc); + + desc = midc_desc_get(midc); + if (desc == NULL) + goto err_desc_get; + desc->sar = src; + desc->dar = dest ; + desc->len = len; + desc->cfg_hi = cfg_hi.cfg_hi; + desc->cfg_lo = cfg_lo.cfg_lo; + desc->ctl_lo = ctl_lo.ctl_lo; + desc->ctl_hi = ctl_hi.ctl_hi; + desc->width = width; + desc->dirn = mids->dirn; + return &desc->txd; + +err_desc_get: + pr_err("ERR_MDMA: Failed to get desc\n"); + midc_desc_put(midc, desc); + return NULL; +} + +/** + * intel_mid_dma_free_chan_resources - Frees dma resources + * @chan: chan requiring attention + * + * Frees the allocated resources on this DMA chan + */ +static void intel_mid_dma_free_chan_resources(struct dma_chan *chan) +{ + struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); + struct middma_device *mid = to_middma_device(chan->device); + struct intel_mid_dma_desc *desc, *_desc; + + if (true == midc->in_use) { + /*trying to free ch in use!!!!!*/ + pr_err("ERR_MDMA: trying to free ch in use\n"); + } + + spin_lock_bh(&midc->lock); + midc->descs_allocated = 0; + list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) { + list_del(&desc->desc_node); + pci_pool_free(mid->dma_pool, desc, desc->txd.phys); + } + list_for_each_entry_safe(desc, _desc, &midc->free_list, desc_node) { + list_del(&desc->desc_node); + pci_pool_free(mid->dma_pool, desc, desc->txd.phys); + } + list_for_each_entry_safe(desc, _desc, &midc->queue, desc_node) { + list_del(&desc->desc_node); + pci_pool_free(mid->dma_pool, desc, desc->txd.phys); + } + spin_unlock_bh(&midc->lock); + midc->in_use = false; + /* Disable CH interrupts */ + iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_BLOCK); + iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_ERR); +} + +/** + * intel_mid_dma_alloc_chan_resources - Allocate dma resources + * @chan: chan requiring attention + * + * Allocates DMA resources on this chan + * Return the descriptors allocated + */ +static int intel_mid_dma_alloc_chan_resources(struct dma_chan *chan) +{ + struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); + struct middma_device *mid = to_middma_device(chan->device); + struct intel_mid_dma_desc *desc; + dma_addr_t phys; + int i = 0; + + + /* ASSERT: channel is idle */ + if (test_ch_en(mid->dma_base, midc->ch_id)) { + /*ch is not idle*/ + pr_err("ERR_MDMA: ch not idle\n"); + return -EIO; + } + midc->completed = chan->cookie = 1; + + spin_lock_bh(&midc->lock); + while (midc->descs_allocated < DESCS_PER_CHANNEL) { + spin_unlock_bh(&midc->lock); + desc = pci_pool_alloc(mid->dma_pool, GFP_KERNEL, &phys); + if (!desc) { + pr_err("ERR_MDMA: desc failed\n"); + return -ENOMEM; + /*check*/ + } + dma_async_tx_descriptor_init(&desc->txd, chan); + desc->txd.tx_submit = intel_mid_dma_tx_submit; + desc->txd.flags = DMA_CTRL_ACK; + desc->txd.phys = phys; + spin_lock_bh(&midc->lock); + i = ++midc->descs_allocated; + list_add_tail(&desc->desc_node, &midc->free_list); + } + spin_unlock_bh(&midc->lock); + midc->in_use = false; + pr_debug("MID_DMA: Desc alloc done ret: %d desc\n", i); + return i; +} + +/** + * midc_handle_error - Handle DMA txn error + * @mid: controller where error occured + * @midc: chan where error occured + * + * Scan the descriptor for error + */ +static void midc_handle_error(struct middma_device *mid, + struct intel_mid_dma_chan *midc) +{ + midc_scan_descriptors(mid, midc); +} + +/** + * dma_tasklet - DMA interrupt tasklet + * @data: tasklet arg (the controller structure) + * + * Scan the controller for interrupts for completion/error + * Clear the interrupt and call for handling completion/error + */ +static void dma_tasklet(unsigned long data) +{ + struct middma_device *mid = NULL; + struct intel_mid_dma_chan *midc = NULL; + u32 status; + int i; + + mid = (struct middma_device *)data; + if (mid == NULL) { + pr_err("ERR_MDMA: tasklet Null param\n"); + return; + } + pr_debug("MDMA: in tasklet for device %x\n", mid->pci_id); + status = ioread32(mid->dma_base + RAW_TFR); + pr_debug("MDMA:RAW_TFR %x\n", status); + status &= mid->intr_mask; + while (status) { + /*txn interrupt*/ + i = get_ch_index(&status, mid->chan_base); + if (i < 0) { + pr_err("ERR_MDMA:Invalid ch index %x\n", i); + return; + } + midc = &mid->ch[i]; + if (midc == NULL) { + pr_err("ERR_MDMA:Null param midc\n"); + return; + } + pr_debug("MDMA:Tx complete interrupt %x, Ch No %d Index %d\n", + status, midc->ch_id, i); + /*clearing this interrupts first*/ + iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_TFR); + iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_BLOCK); + + spin_lock_bh(&midc->lock); + midc_scan_descriptors(mid, midc); + pr_debug("MDMA:Scan of desc... complete, unmasking\n"); + iowrite32(UNMASK_INTR_REG(midc->ch_id), + mid->dma_base + MASK_TFR); + spin_unlock_bh(&midc->lock); + } + + status = ioread32(mid->dma_base + RAW_ERR); + status &= mid->intr_mask; + while (status) { + /*err interrupt*/ + i = get_ch_index(&status, mid->chan_base); + if (i < 0) { + pr_err("ERR_MDMA:Invalid ch index %x\n", i); + return; + } + midc = &mid->ch[i]; + if (midc == NULL) { + pr_err("ERR_MDMA:Null param midc\n"); + return; + } + pr_debug("MDMA:Tx complete interrupt %x, Ch No %d Index %d\n", + status, midc->ch_id, i); + + iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_ERR); + spin_lock_bh(&midc->lock); + midc_handle_error(mid, midc); + iowrite32(UNMASK_INTR_REG(midc->ch_id), + mid->dma_base + MASK_ERR); + spin_unlock_bh(&midc->lock); + } + pr_debug("MDMA:Exiting takslet...\n"); + return; +} + +static void dma_tasklet1(unsigned long data) +{ + pr_debug("MDMA:in takslet1...\n"); + return dma_tasklet(data); +} + +static void dma_tasklet2(unsigned long data) +{ + pr_debug("MDMA:in takslet2...\n"); + return dma_tasklet(data); +} + +/** + * intel_mid_dma_interrupt - DMA ISR + * @irq: IRQ where interrupt occurred + * @data: ISR cllback data (the controller structure) + * + * See if this is our interrupt if so then schedule the tasklet + * otherwise ignore + */ +static irqreturn_t intel_mid_dma_interrupt(int irq, void *data) +{ + struct middma_device *mid = data; + u32 status; + int call_tasklet = 0; + + /*DMA Interrupt*/ + pr_debug("MDMA:Got an interrupt on irq %d\n", irq); + if (!mid) { + pr_err("ERR_MDMA:null pointer mid\n"); + return -EINVAL; + } + + status = ioread32(mid->dma_base + RAW_TFR); + pr_debug("MDMA: Status %x, Mask %x\n", status, mid->intr_mask); + status &= mid->intr_mask; + if (status) { + /*need to disable intr*/ + iowrite32((status << 8), mid->dma_base + MASK_TFR); + pr_debug("MDMA: Calling tasklet %x\n", status); + call_tasklet = 1; + } + status = ioread32(mid->dma_base + RAW_ERR); + status &= mid->intr_mask; + if (status) { + iowrite32(MASK_INTR_REG(status), mid->dma_base + MASK_ERR); + call_tasklet = 1; + } + if (call_tasklet) + tasklet_schedule(&mid->tasklet); + + return IRQ_HANDLED; +} + +static irqreturn_t intel_mid_dma_interrupt1(int irq, void *data) +{ + return intel_mid_dma_interrupt(irq, data); +} + +static irqreturn_t intel_mid_dma_interrupt2(int irq, void *data) +{ + return intel_mid_dma_interrupt(irq, data); +} + +/** + * mid_setup_dma - Setup the DMA controller + * @pdev: Controller PCI device structure + * + * Initilize the DMA controller, channels, registers with DMA engine, + * ISR. Initilize DMA controller channels. + */ +static int mid_setup_dma(struct pci_dev *pdev) +{ + struct middma_device *dma = pci_get_drvdata(pdev); + int err, i; + unsigned int irq_level; + + /* DMA coherent memory pool for DMA descriptor allocations */ + dma->dma_pool = pci_pool_create("intel_mid_dma_desc_pool", pdev, + sizeof(struct intel_mid_dma_desc), + 32, 0); + if (NULL == dma->dma_pool) { + pr_err("ERR_MDMA:pci_pool_create failed\n"); + err = -ENOMEM; + kfree(dma); + goto err_dma_pool; + } + + INIT_LIST_HEAD(&dma->common.channels); + dma->pci_id = pdev->device; + if (dma->pimr_mask) { + dma->mask_reg = ioremap(LNW_PERIPHRAL_MASK_BASE, + LNW_PERIPHRAL_MASK_SIZE); + if (dma->mask_reg == NULL) { + pr_err("ERR_MDMA:Cant map periphral intr space !!\n"); + return -ENOMEM; + } + } else + dma->mask_reg = NULL; + + pr_debug("MDMA:Adding %d channel for this controller\n", dma->max_chan); + /*init CH structures*/ + dma->intr_mask = 0; + for (i = 0; i < dma->max_chan; i++) { + struct intel_mid_dma_chan *midch = &dma->ch[i]; + + midch->chan.device = &dma->common; + midch->chan.cookie = 1; + midch->chan.chan_id = i; + midch->ch_id = dma->chan_base + i; + pr_debug("MDMA:Init CH %d, ID %d\n", i, midch->ch_id); + + midch->dma_base = dma->dma_base; + midch->ch_regs = dma->dma_base + DMA_CH_SIZE * midch->ch_id; + midch->dma = dma; + dma->intr_mask |= 1 << (dma->chan_base + i); + spin_lock_init(&midch->lock); + + INIT_LIST_HEAD(&midch->active_list); + INIT_LIST_HEAD(&midch->queue); + INIT_LIST_HEAD(&midch->free_list); + /*mask interrupts*/ + iowrite32(MASK_INTR_REG(midch->ch_id), + dma->dma_base + MASK_BLOCK); + iowrite32(MASK_INTR_REG(midch->ch_id), + dma->dma_base + MASK_SRC_TRAN); + iowrite32(MASK_INTR_REG(midch->ch_id), + dma->dma_base + MASK_DST_TRAN); + iowrite32(MASK_INTR_REG(midch->ch_id), + dma->dma_base + MASK_ERR); + iowrite32(MASK_INTR_REG(midch->ch_id), + dma->dma_base + MASK_TFR); + + disable_dma_interrupt(midch); + list_add_tail(&midch->chan.device_node, &dma->common.channels); + } + pr_debug("MDMA: Calc Mask as %x for this controller\n", dma->intr_mask); + + /*init dma structure*/ + dma_cap_zero(dma->common.cap_mask); + dma_cap_set(DMA_MEMCPY, dma->common.cap_mask); + dma_cap_set(DMA_SLAVE, dma->common.cap_mask); + dma_cap_set(DMA_PRIVATE, dma->common.cap_mask); + dma->common.dev = &pdev->dev; + dma->common.chancnt = dma->max_chan; + + dma->common.device_alloc_chan_resources = + intel_mid_dma_alloc_chan_resources; + dma->common.device_free_chan_resources = + intel_mid_dma_free_chan_resources; + + dma->common.device_tx_status = intel_mid_dma_tx_status; + dma->common.device_prep_dma_memcpy = intel_mid_dma_prep_memcpy; + dma->common.device_issue_pending = intel_mid_dma_issue_pending; + dma->common.device_prep_slave_sg = intel_mid_dma_prep_slave_sg; + dma->common.device_control = intel_mid_dma_device_control; + + /*enable dma cntrl*/ + iowrite32(REG_BIT0, dma->dma_base + DMA_CFG); + + /*register irq */ + if (dma->pimr_mask) { + irq_level = IRQF_SHARED; + pr_debug("MDMA:Requesting irq shared for DMAC1\n"); + err = request_irq(pdev->irq, intel_mid_dma_interrupt1, + IRQF_SHARED, "INTEL_MID_DMAC1", dma); + if (0 != err) + goto err_irq; + } else { + dma->intr_mask = 0x03; + irq_level = 0; + pr_debug("MDMA:Requesting irq for DMAC2\n"); + err = request_irq(pdev->irq, intel_mid_dma_interrupt2, + 0, "INTEL_MID_DMAC2", dma); + if (0 != err) + goto err_irq; + } + /*register device w/ engine*/ + err = dma_async_device_register(&dma->common); + if (0 != err) { + pr_err("ERR_MDMA:device_register failed: %d\n", err); + goto err_engine; + } + if (dma->pimr_mask) { + pr_debug("setting up tasklet1 for DMAC1\n"); + tasklet_init(&dma->tasklet, dma_tasklet1, (unsigned long)dma); + } else { + pr_debug("setting up tasklet2 for DMAC2\n"); + tasklet_init(&dma->tasklet, dma_tasklet2, (unsigned long)dma); + } + return 0; + +err_engine: + free_irq(pdev->irq, dma); +err_irq: + pci_pool_destroy(dma->dma_pool); + kfree(dma); +err_dma_pool: + pr_err("ERR_MDMA:setup_dma failed: %d\n", err); + return err; + +} + +/** + * middma_shutdown - Shutdown the DMA controller + * @pdev: Controller PCI device structure + * + * Called by remove + * Unregister DMa controller, clear all structures and free interrupt + */ +static void middma_shutdown(struct pci_dev *pdev) +{ + struct middma_device *device = pci_get_drvdata(pdev); + + dma_async_device_unregister(&device->common); + pci_pool_destroy(device->dma_pool); + if (device->mask_reg) + iounmap(device->mask_reg); + if (device->dma_base) + iounmap(device->dma_base); + free_irq(pdev->irq, device); + return; +} + +/** + * intel_mid_dma_probe - PCI Probe + * @pdev: Controller PCI device structure + * @id: pci device id structure + * + * Initilize the PCI device, map BARs, query driver data. + * Call setup_dma to complete contoller and chan initilzation + */ +static int __devinit intel_mid_dma_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct middma_device *device; + u32 base_addr, bar_size; + struct intel_mid_dma_probe_info *info; + int err; + + pr_debug("MDMA: probe for %x\n", pdev->device); + info = (void *)id->driver_data; + pr_debug("MDMA: CH %d, base %d, block len %d, Periphral mask %x\n", + info->max_chan, info->ch_base, + info->block_size, info->pimr_mask); + + err = pci_enable_device(pdev); + if (err) + goto err_enable_device; + + err = pci_request_regions(pdev, "intel_mid_dmac"); + if (err) + goto err_request_regions; + + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) + goto err_set_dma_mask; + + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) + goto err_set_dma_mask; + + device = kzalloc(sizeof(*device), GFP_KERNEL); + if (!device) { + pr_err("ERR_MDMA:kzalloc failed probe\n"); + err = -ENOMEM; + goto err_kzalloc; + } + device->pdev = pci_dev_get(pdev); + + base_addr = pci_resource_start(pdev, 0); + bar_size = pci_resource_len(pdev, 0); + device->dma_base = ioremap_nocache(base_addr, DMA_REG_SIZE); + if (!device->dma_base) { + pr_err("ERR_MDMA:ioremap failed\n"); + err = -ENOMEM; + goto err_ioremap; + } + pci_set_drvdata(pdev, device); + pci_set_master(pdev); + device->max_chan = info->max_chan; + device->chan_base = info->ch_base; + device->block_size = info->block_size; + device->pimr_mask = info->pimr_mask; + + err = mid_setup_dma(pdev); + if (err) + goto err_dma; + + return 0; + +err_dma: + iounmap(device->dma_base); +err_ioremap: + pci_dev_put(pdev); + kfree(device); +err_kzalloc: +err_set_dma_mask: + pci_release_regions(pdev); + pci_disable_device(pdev); +err_request_regions: +err_enable_device: + pr_err("ERR_MDMA:Probe failed %d\n", err); + return err; +} + +/** + * intel_mid_dma_remove - PCI remove + * @pdev: Controller PCI device structure + * + * Free up all resources and data + * Call shutdown_dma to complete contoller and chan cleanup + */ +static void __devexit intel_mid_dma_remove(struct pci_dev *pdev) +{ + struct middma_device *device = pci_get_drvdata(pdev); + middma_shutdown(pdev); + pci_dev_put(pdev); + kfree(device); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +/****************************************************************************** +* PCI stuff +*/ +static struct pci_device_id intel_mid_dma_ids[] = { + { PCI_VDEVICE(INTEL, INTEL_MID_DMAC1_ID), INFO(2, 6, 4095, 0x200020)}, + { PCI_VDEVICE(INTEL, INTEL_MID_DMAC2_ID), INFO(2, 0, 2047, 0)}, + { PCI_VDEVICE(INTEL, INTEL_MID_GP_DMAC2_ID), INFO(2, 0, 2047, 0)}, + { PCI_VDEVICE(INTEL, INTEL_MFLD_DMAC1_ID), INFO(4, 0, 4095, 0x400040)}, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, intel_mid_dma_ids); + +static struct pci_driver intel_mid_dma_pci = { + .name = "Intel MID DMA", + .id_table = intel_mid_dma_ids, + .probe = intel_mid_dma_probe, + .remove = __devexit_p(intel_mid_dma_remove), +}; + +static int __init intel_mid_dma_init(void) +{ + pr_debug("INFO_MDMA: LNW DMA Driver Version %s\n", + INTEL_MID_DMA_DRIVER_VERSION); + return pci_register_driver(&intel_mid_dma_pci); +} +fs_initcall(intel_mid_dma_init); + +static void __exit intel_mid_dma_exit(void) +{ + pci_unregister_driver(&intel_mid_dma_pci); +} +module_exit(intel_mid_dma_exit); + +MODULE_AUTHOR("Vinod Koul <vinod.koul@intel.com>"); +MODULE_DESCRIPTION("Intel (R) MID DMAC Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION(INTEL_MID_DMA_DRIVER_VERSION); diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h new file mode 100644 index 0000000..d81aa65 --- /dev/null +++ b/drivers/dma/intel_mid_dma_regs.h @@ -0,0 +1,260 @@ +/* + * intel_mid_dma_regs.h - Intel MID DMA Drivers + * + * Copyright (C) 2008-10 Intel Corp + * Author: Vinod Koul <vinod.koul@intel.com> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * + */ +#ifndef __INTEL_MID_DMAC_REGS_H__ +#define __INTEL_MID_DMAC_REGS_H__ + +#include <linux/dmaengine.h> +#include <linux/dmapool.h> +#include <linux/pci_ids.h> + +#define INTEL_MID_DMA_DRIVER_VERSION "1.0.5" + +#define REG_BIT0 0x00000001 +#define REG_BIT8 0x00000100 + +#define UNMASK_INTR_REG(chan_num) \ + ((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num)) +#define MASK_INTR_REG(chan_num) (REG_BIT8 << chan_num) + +#define ENABLE_CHANNEL(chan_num) \ + ((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num)) + +#define DESCS_PER_CHANNEL 16 +/*DMA Registers*/ +/*registers associated with channel programming*/ +#define DMA_REG_SIZE 0x400 +#define DMA_CH_SIZE 0x58 + +/*CH X REG = (DMA_CH_SIZE)*CH_NO + REG*/ +#define SAR 0x00 /* Source Address Register*/ +#define DAR 0x08 /* Destination Address Register*/ +#define CTL_LOW 0x18 /* Control Register*/ +#define CTL_HIGH 0x1C /* Control Register*/ +#define CFG_LOW 0x40 /* Configuration Register Low*/ +#define CFG_HIGH 0x44 /* Configuration Register high*/ + +#define STATUS_TFR 0x2E8 +#define STATUS_BLOCK 0x2F0 +#define STATUS_ERR 0x308 + +#define RAW_TFR 0x2C0 +#define RAW_BLOCK 0x2C8 +#define RAW_ERR 0x2E0 + +#define MASK_TFR 0x310 +#define MASK_BLOCK 0x318 +#define MASK_SRC_TRAN 0x320 +#define MASK_DST_TRAN 0x328 +#define MASK_ERR 0x330 + +#define CLEAR_TFR 0x338 +#define CLEAR_BLOCK 0x340 +#define CLEAR_SRC_TRAN 0x348 +#define CLEAR_DST_TRAN 0x350 +#define CLEAR_ERR 0x358 + +#define INTR_STATUS 0x360 +#define DMA_CFG 0x398 +#define DMA_CHAN_EN 0x3A0 + +/*DMA channel control registers*/ +union intel_mid_dma_ctl_lo { + struct { + u32 int_en:1; /*enable or disable interrupts*/ + /*should be 0*/ + u32 dst_tr_width:3; /*destination transfer width*/ + /*usually 32 bits = 010*/ + u32 src_tr_width:3; /*source transfer width*/ + /*usually 32 bits = 010*/ + u32 dinc:2; /*destination address inc/dec*/ + /*For mem:INC=00, Periphral NoINC=11*/ + u32 sinc:2; /*source address inc or dec, as above*/ + u32 dst_msize:3; /*destination burst transaction length*/ + /*always = 16 ie 011*/ + u32 src_msize:3; /*source burst transaction length*/ + /*always = 16 ie 011*/ + u32 reser1:3; + u32 tt_fc:3; /*transfer type and flow controller*/ + /*M-M = 000 + P-M = 010 + M-P = 001*/ + u32 dms:2; /*destination master select = 0*/ + u32 sms:2; /*source master select = 0*/ + u32 llp_dst_en:1; /*enable/disable destination LLP = 0*/ + u32 llp_src_en:1; /*enable/disable source LLP = 0*/ + u32 reser2:3; + } ctlx; + u32 ctl_lo; +}; + +union intel_mid_dma_ctl_hi { + struct { + u32 block_ts:12; /*block transfer size*/ + /*configured by DMAC*/ + u32 reser:20; + } ctlx; + u32 ctl_hi; + +}; + +/*DMA channel configuration registers*/ +union intel_mid_dma_cfg_lo { + struct { + u32 reser1:5; + u32 ch_prior:3; /*channel priority = 0*/ + u32 ch_susp:1; /*channel suspend = 0*/ + u32 fifo_empty:1; /*FIFO empty or not R bit = 0*/ + u32 hs_sel_dst:1; /*select HW/SW destn handshaking*/ + /*HW = 0, SW = 1*/ + u32 hs_sel_src:1; /*select HW/SW src handshaking*/ + u32 reser2:6; + u32 dst_hs_pol:1; /*dest HS interface polarity*/ + u32 src_hs_pol:1; /*src HS interface polarity*/ + u32 max_abrst:10; /*max AMBA burst len = 0 (no sw limit*/ + u32 reload_src:1; /*auto reload src addr =1 if src is P*/ + u32 reload_dst:1; /*AR destn addr =1 if dstn is P*/ + } cfgx; + u32 cfg_lo; +}; + +union intel_mid_dma_cfg_hi { + struct { + u32 fcmode:1; /*flow control mode = 1*/ + u32 fifo_mode:1; /*FIFO mode select = 1*/ + u32 protctl:3; /*protection control = 0*/ + u32 rsvd:2; + u32 src_per:4; /*src hw HS interface*/ + u32 dst_per:4; /*dstn hw HS interface*/ + u32 reser2:17; + } cfgx; + u32 cfg_hi; +}; + +/** + * struct intel_mid_dma_chan - internal mid representation of a DMA channel + * @chan: dma_chan strcture represetation for mid chan + * @ch_regs: MMIO register space pointer to channel register + * @dma_base: MMIO register space DMA engine base pointer + * @ch_id: DMA channel id + * @lock: channel spinlock + * @completed: DMA cookie + * @active_list: current active descriptors + * @queue: current queued up descriptors + * @free_list: current free descriptors + * @slave: dma slave struture + * @descs_allocated: total number of decsiptors allocated + * @dma: dma device struture pointer + * @in_use: bool representing if ch is in use or not + */ +struct intel_mid_dma_chan { + struct dma_chan chan; + void __iomem *ch_regs; + void __iomem *dma_base; + int ch_id; + spinlock_t lock; + dma_cookie_t completed; + struct list_head active_list; + struct list_head queue; + struct list_head free_list; + struct intel_mid_dma_slave *slave; + unsigned int descs_allocated; + struct middma_device *dma; + bool in_use; +}; + +static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan( + struct dma_chan *chan) +{ + return container_of(chan, struct intel_mid_dma_chan, chan); +} + +/** + * struct middma_device - internal representation of a DMA device + * @pdev: PCI device + * @dma_base: MMIO register space pointer of DMA + * @dma_pool: for allocating DMA descriptors + * @common: embedded struct dma_device + * @tasklet: dma tasklet for processing interrupts + * @ch: per channel data + * @pci_id: DMA device PCI ID + * @intr_mask: Interrupt mask to be used + * @mask_reg: MMIO register for periphral mask + * @chan_base: Base ch index (read from driver data) + * @max_chan: max number of chs supported (from drv_data) + * @block_size: Block size of DMA transfer supported (from drv_data) + * @pimr_mask: MMIO register addr for periphral interrupt (from drv_data) + */ +struct middma_device { + struct pci_dev *pdev; + void __iomem *dma_base; + struct pci_pool *dma_pool; + struct dma_device common; + struct tasklet_struct tasklet; + struct intel_mid_dma_chan ch[MAX_CHAN]; + unsigned int pci_id; + unsigned int intr_mask; + void __iomem *mask_reg; + int chan_base; + int max_chan; + int block_size; + unsigned int pimr_mask; +}; + +static inline struct middma_device *to_middma_device(struct dma_device *common) +{ + return container_of(common, struct middma_device, common); +} + +struct intel_mid_dma_desc { + void __iomem *block; /*ch ptr*/ + struct list_head desc_node; + struct dma_async_tx_descriptor txd; + size_t len; + dma_addr_t sar; + dma_addr_t dar; + u32 cfg_hi; + u32 cfg_lo; + u32 ctl_lo; + u32 ctl_hi; + dma_addr_t next; + enum dma_data_direction dirn; + enum dma_status status; + enum intel_mid_dma_width width; /*width of DMA txn*/ + enum intel_mid_dma_mode cfg_mode; /*mode configuration*/ + +}; + +static inline int test_ch_en(void __iomem *dma, u32 ch_no) +{ + u32 en_reg = ioread32(dma + DMA_CHAN_EN); + return (en_reg >> ch_no) & 0x1; +} + +static inline struct intel_mid_dma_desc *to_intel_mid_dma_desc + (struct dma_async_tx_descriptor *txd) +{ + return container_of(txd, struct intel_mid_dma_desc, txd); +} +#endif /*__INTEL_MID_DMAC_REGS_H__*/ diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 6d3a73b..5216c8a 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -97,6 +97,7 @@ struct ioat_chan_common { #define IOAT_RESET_PENDING 2 #define IOAT_KOBJ_INIT_FAIL 3 #define IOAT_RESHAPE_PENDING 4 + #define IOAT_RUN 5 struct timer_list timer; #define COMPLETION_TIMEOUT msecs_to_jiffies(100) #define IDLE_TIMEOUT msecs_to_jiffies(2000) diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 3c8b32a..216f9d3 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -287,7 +287,10 @@ void ioat2_timer_event(unsigned long data) chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); dev_err(to_dev(chan), "%s: Channel halted (%x)\n", __func__, chanerr); - BUG_ON(is_ioat_bug(chanerr)); + if (test_bit(IOAT_RUN, &chan->state)) + BUG_ON(is_ioat_bug(chanerr)); + else /* we never got off the ground */ + return; } /* if we haven't made progress and we have already @@ -492,6 +495,8 @@ static struct ioat_ring_ent **ioat2_alloc_ring(struct dma_chan *c, int order, gf return ring; } +void ioat2_free_chan_resources(struct dma_chan *c); + /* ioat2_alloc_chan_resources - allocate/initialize ioat2 descriptor ring * @chan: channel to be initialized */ @@ -500,6 +505,7 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) struct ioat2_dma_chan *ioat = to_ioat2_chan(c); struct ioat_chan_common *chan = &ioat->base; struct ioat_ring_ent **ring; + u64 status; int order; /* have we already been set up? */ @@ -540,7 +546,20 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) tasklet_enable(&chan->cleanup_task); ioat2_start_null_desc(ioat); - return 1 << ioat->alloc_order; + /* check that we got off the ground */ + udelay(5); + status = ioat_chansts(chan); + if (is_ioat_active(status) || is_ioat_idle(status)) { + set_bit(IOAT_RUN, &chan->state); + return 1 << ioat->alloc_order; + } else { + u32 chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + + dev_WARN(to_dev(chan), + "failed to start channel chanerr: %#x\n", chanerr); + ioat2_free_chan_resources(c); + return -EFAULT; + } } bool reshape_ring(struct ioat2_dma_chan *ioat, int order) @@ -778,6 +797,7 @@ void ioat2_free_chan_resources(struct dma_chan *c) del_timer_sync(&chan->timer); device->cleanup_fn((unsigned long) c); device->reset_hw(chan); + clear_bit(IOAT_RUN, &chan->state); spin_lock_bh(&chan->cleanup_lock); spin_lock_bh(&ioat->prep_lock); diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 1cdd22e..d0f4990 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -361,7 +361,10 @@ static void ioat3_timer_event(unsigned long data) chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); dev_err(to_dev(chan), "%s: Channel halted (%x)\n", __func__, chanerr); - BUG_ON(is_ioat_bug(chanerr)); + if (test_bit(IOAT_RUN, &chan->state)) + BUG_ON(is_ioat_bug(chanerr)); + else /* we never got off the ground */ + return; } /* if we haven't made progress and we have already diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c new file mode 100644 index 0000000..3533948 --- /dev/null +++ b/drivers/dma/pch_dma.c @@ -0,0 +1,957 @@ +/* + * Topcliff PCH DMA controller driver + * Copyright (c) 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/pch_dma.h> + +#define DRV_NAME "pch-dma" + +#define DMA_CTL0_DISABLE 0x0 +#define DMA_CTL0_SG 0x1 +#define DMA_CTL0_ONESHOT 0x2 +#define DMA_CTL0_MODE_MASK_BITS 0x3 +#define DMA_CTL0_DIR_SHIFT_BITS 2 +#define DMA_CTL0_BITS_PER_CH 4 + +#define DMA_CTL2_START_SHIFT_BITS 8 +#define DMA_CTL2_IRQ_ENABLE_MASK ((1UL << DMA_CTL2_START_SHIFT_BITS) - 1) + +#define DMA_STATUS_IDLE 0x0 +#define DMA_STATUS_DESC_READ 0x1 +#define DMA_STATUS_WAIT 0x2 +#define DMA_STATUS_ACCESS 0x3 +#define DMA_STATUS_BITS_PER_CH 2 +#define DMA_STATUS_MASK_BITS 0x3 +#define DMA_STATUS_SHIFT_BITS 16 +#define DMA_STATUS_IRQ(x) (0x1 << (x)) +#define DMA_STATUS_ERR(x) (0x1 << ((x) + 8)) + +#define DMA_DESC_WIDTH_SHIFT_BITS 12 +#define DMA_DESC_WIDTH_1_BYTE (0x3 << DMA_DESC_WIDTH_SHIFT_BITS) +#define DMA_DESC_WIDTH_2_BYTES (0x2 << DMA_DESC_WIDTH_SHIFT_BITS) +#define DMA_DESC_WIDTH_4_BYTES (0x0 << DMA_DESC_WIDTH_SHIFT_BITS) +#define DMA_DESC_MAX_COUNT_1_BYTE 0x3FF +#define DMA_DESC_MAX_COUNT_2_BYTES 0x3FF +#define DMA_DESC_MAX_COUNT_4_BYTES 0x7FF +#define DMA_DESC_END_WITHOUT_IRQ 0x0 +#define DMA_DESC_END_WITH_IRQ 0x1 +#define DMA_DESC_FOLLOW_WITHOUT_IRQ 0x2 +#define DMA_DESC_FOLLOW_WITH_IRQ 0x3 + +#define MAX_CHAN_NR 8 + +static unsigned int init_nr_desc_per_channel = 64; +module_param(init_nr_desc_per_channel, uint, 0644); +MODULE_PARM_DESC(init_nr_desc_per_channel, + "initial descriptors per channel (default: 64)"); + +struct pch_dma_desc_regs { + u32 dev_addr; + u32 mem_addr; + u32 size; + u32 next; +}; + +struct pch_dma_regs { + u32 dma_ctl0; + u32 dma_ctl1; + u32 dma_ctl2; + u32 reserved1; + u32 dma_sts0; + u32 dma_sts1; + u32 reserved2; + u32 reserved3; + struct pch_dma_desc_regs desc[0]; +}; + +struct pch_dma_desc { + struct pch_dma_desc_regs regs; + struct dma_async_tx_descriptor txd; + struct list_head desc_node; + struct list_head tx_list; +}; + +struct pch_dma_chan { + struct dma_chan chan; + void __iomem *membase; + enum dma_data_direction dir; + struct tasklet_struct tasklet; + unsigned long err_status; + + spinlock_t lock; + + dma_cookie_t completed_cookie; + struct list_head active_list; + struct list_head queue; + struct list_head free_list; + unsigned int descs_allocated; +}; + +#define PDC_DEV_ADDR 0x00 +#define PDC_MEM_ADDR 0x04 +#define PDC_SIZE 0x08 +#define PDC_NEXT 0x0C + +#define channel_readl(pdc, name) \ + readl((pdc)->membase + PDC_##name) +#define channel_writel(pdc, name, val) \ + writel((val), (pdc)->membase + PDC_##name) + +struct pch_dma { + struct dma_device dma; + void __iomem *membase; + struct pci_pool *pool; + struct pch_dma_regs regs; + struct pch_dma_desc_regs ch_regs[MAX_CHAN_NR]; + struct pch_dma_chan channels[0]; +}; + +#define PCH_DMA_CTL0 0x00 +#define PCH_DMA_CTL1 0x04 +#define PCH_DMA_CTL2 0x08 +#define PCH_DMA_STS0 0x10 +#define PCH_DMA_STS1 0x14 + +#define dma_readl(pd, name) \ + readl((pd)->membase + PCH_DMA_##name) +#define dma_writel(pd, name, val) \ + writel((val), (pd)->membase + PCH_DMA_##name) + +static inline struct pch_dma_desc *to_pd_desc(struct dma_async_tx_descriptor *txd) +{ + return container_of(txd, struct pch_dma_desc, txd); +} + +static inline struct pch_dma_chan *to_pd_chan(struct dma_chan *chan) +{ + return container_of(chan, struct pch_dma_chan, chan); +} + +static inline struct pch_dma *to_pd(struct dma_device *ddev) +{ + return container_of(ddev, struct pch_dma, dma); +} + +static inline struct device *chan2dev(struct dma_chan *chan) +{ + return &chan->dev->device; +} + +static inline struct device *chan2parent(struct dma_chan *chan) +{ + return chan->dev->device.parent; +} + +static inline struct pch_dma_desc *pdc_first_active(struct pch_dma_chan *pd_chan) +{ + return list_first_entry(&pd_chan->active_list, + struct pch_dma_desc, desc_node); +} + +static inline struct pch_dma_desc *pdc_first_queued(struct pch_dma_chan *pd_chan) +{ + return list_first_entry(&pd_chan->queue, + struct pch_dma_desc, desc_node); +} + +static void pdc_enable_irq(struct dma_chan *chan, int enable) +{ + struct pch_dma *pd = to_pd(chan->device); + u32 val; + + val = dma_readl(pd, CTL2); + + if (enable) + val |= 0x1 << chan->chan_id; + else + val &= ~(0x1 << chan->chan_id); + + dma_writel(pd, CTL2, val); + + dev_dbg(chan2dev(chan), "pdc_enable_irq: chan %d -> %x\n", + chan->chan_id, val); +} + +static void pdc_set_dir(struct dma_chan *chan) +{ + struct pch_dma_chan *pd_chan = to_pd_chan(chan); + struct pch_dma *pd = to_pd(chan->device); + u32 val; + + val = dma_readl(pd, CTL0); + + if (pd_chan->dir == DMA_TO_DEVICE) + val |= 0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id + + DMA_CTL0_DIR_SHIFT_BITS); + else + val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id + + DMA_CTL0_DIR_SHIFT_BITS)); + + dma_writel(pd, CTL0, val); + + dev_dbg(chan2dev(chan), "pdc_set_dir: chan %d -> %x\n", + chan->chan_id, val); +} + +static void pdc_set_mode(struct dma_chan *chan, u32 mode) +{ + struct pch_dma *pd = to_pd(chan->device); + u32 val; + + val = dma_readl(pd, CTL0); + + val &= ~(DMA_CTL0_MODE_MASK_BITS << + (DMA_CTL0_BITS_PER_CH * chan->chan_id)); + val |= mode << (DMA_CTL0_BITS_PER_CH * chan->chan_id); + + dma_writel(pd, CTL0, val); + + dev_dbg(chan2dev(chan), "pdc_set_mode: chan %d -> %x\n", + chan->chan_id, val); +} + +static u32 pdc_get_status(struct pch_dma_chan *pd_chan) +{ + struct pch_dma *pd = to_pd(pd_chan->chan.device); + u32 val; + + val = dma_readl(pd, STS0); + return DMA_STATUS_MASK_BITS & (val >> (DMA_STATUS_SHIFT_BITS + + DMA_STATUS_BITS_PER_CH * pd_chan->chan.chan_id)); +} + +static bool pdc_is_idle(struct pch_dma_chan *pd_chan) +{ + if (pdc_get_status(pd_chan) == DMA_STATUS_IDLE) + return true; + else + return false; +} + +static void pdc_dostart(struct pch_dma_chan *pd_chan, struct pch_dma_desc* desc) +{ + struct pch_dma *pd = to_pd(pd_chan->chan.device); + u32 val; + + if (!pdc_is_idle(pd_chan)) { + dev_err(chan2dev(&pd_chan->chan), + "BUG: Attempt to start non-idle channel\n"); + return; + } + + channel_writel(pd_chan, DEV_ADDR, desc->regs.dev_addr); + channel_writel(pd_chan, MEM_ADDR, desc->regs.mem_addr); + channel_writel(pd_chan, SIZE, desc->regs.size); + channel_writel(pd_chan, NEXT, desc->regs.next); + + dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> dev_addr: %x\n", + pd_chan->chan.chan_id, desc->regs.dev_addr); + dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> mem_addr: %x\n", + pd_chan->chan.chan_id, desc->regs.mem_addr); + dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> size: %x\n", + pd_chan->chan.chan_id, desc->regs.size); + dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> next: %x\n", + pd_chan->chan.chan_id, desc->regs.next); + + if (list_empty(&desc->tx_list)) + pdc_set_mode(&pd_chan->chan, DMA_CTL0_ONESHOT); + else + pdc_set_mode(&pd_chan->chan, DMA_CTL0_SG); + + val = dma_readl(pd, CTL2); + val |= 1 << (DMA_CTL2_START_SHIFT_BITS + pd_chan->chan.chan_id); + dma_writel(pd, CTL2, val); +} + +static void pdc_chain_complete(struct pch_dma_chan *pd_chan, + struct pch_dma_desc *desc) +{ + struct dma_async_tx_descriptor *txd = &desc->txd; + dma_async_tx_callback callback = txd->callback; + void *param = txd->callback_param; + + list_splice_init(&desc->tx_list, &pd_chan->free_list); + list_move(&desc->desc_node, &pd_chan->free_list); + + if (callback) + callback(param); +} + +static void pdc_complete_all(struct pch_dma_chan *pd_chan) +{ + struct pch_dma_desc *desc, *_d; + LIST_HEAD(list); + + BUG_ON(!pdc_is_idle(pd_chan)); + + if (!list_empty(&pd_chan->queue)) + pdc_dostart(pd_chan, pdc_first_queued(pd_chan)); + + list_splice_init(&pd_chan->active_list, &list); + list_splice_init(&pd_chan->queue, &pd_chan->active_list); + + list_for_each_entry_safe(desc, _d, &list, desc_node) + pdc_chain_complete(pd_chan, desc); +} + +static void pdc_handle_error(struct pch_dma_chan *pd_chan) +{ + struct pch_dma_desc *bad_desc; + + bad_desc = pdc_first_active(pd_chan); + list_del(&bad_desc->desc_node); + + list_splice_init(&pd_chan->queue, pd_chan->active_list.prev); + + if (!list_empty(&pd_chan->active_list)) + pdc_dostart(pd_chan, pdc_first_active(pd_chan)); + + dev_crit(chan2dev(&pd_chan->chan), "Bad descriptor submitted\n"); + dev_crit(chan2dev(&pd_chan->chan), "descriptor cookie: %d\n", + bad_desc->txd.cookie); + + pdc_chain_complete(pd_chan, bad_desc); +} + +static void pdc_advance_work(struct pch_dma_chan *pd_chan) +{ + if (list_empty(&pd_chan->active_list) || + list_is_singular(&pd_chan->active_list)) { + pdc_complete_all(pd_chan); + } else { + pdc_chain_complete(pd_chan, pdc_first_active(pd_chan)); + pdc_dostart(pd_chan, pdc_first_active(pd_chan)); + } +} + +static dma_cookie_t pdc_assign_cookie(struct pch_dma_chan *pd_chan, + struct pch_dma_desc *desc) +{ + dma_cookie_t cookie = pd_chan->chan.cookie; + + if (++cookie < 0) + cookie = 1; + + pd_chan->chan.cookie = cookie; + desc->txd.cookie = cookie; + + return cookie; +} + +static dma_cookie_t pd_tx_submit(struct dma_async_tx_descriptor *txd) +{ + struct pch_dma_desc *desc = to_pd_desc(txd); + struct pch_dma_chan *pd_chan = to_pd_chan(txd->chan); + dma_cookie_t cookie; + + spin_lock_bh(&pd_chan->lock); + cookie = pdc_assign_cookie(pd_chan, desc); + + if (list_empty(&pd_chan->active_list)) { + list_add_tail(&desc->desc_node, &pd_chan->active_list); + pdc_dostart(pd_chan, desc); + } else { + list_add_tail(&desc->desc_node, &pd_chan->queue); + } + + spin_unlock_bh(&pd_chan->lock); + return 0; +} + +static struct pch_dma_desc *pdc_alloc_desc(struct dma_chan *chan, gfp_t flags) +{ + struct pch_dma_desc *desc = NULL; + struct pch_dma *pd = to_pd(chan->device); + dma_addr_t addr; + + desc = pci_pool_alloc(pd->pool, GFP_KERNEL, &addr); + if (desc) { + memset(desc, 0, sizeof(struct pch_dma_desc)); + INIT_LIST_HEAD(&desc->tx_list); + dma_async_tx_descriptor_init(&desc->txd, chan); + desc->txd.tx_submit = pd_tx_submit; + desc->txd.flags = DMA_CTRL_ACK; + desc->txd.phys = addr; + } + + return desc; +} + +static struct pch_dma_desc *pdc_desc_get(struct pch_dma_chan *pd_chan) +{ + struct pch_dma_desc *desc, *_d; + struct pch_dma_desc *ret = NULL; + int i; + + spin_lock_bh(&pd_chan->lock); + list_for_each_entry_safe(desc, _d, &pd_chan->free_list, desc_node) { + i++; + if (async_tx_test_ack(&desc->txd)) { + list_del(&desc->desc_node); + ret = desc; + break; + } + dev_dbg(chan2dev(&pd_chan->chan), "desc %p not ACKed\n", desc); + } + spin_unlock_bh(&pd_chan->lock); + dev_dbg(chan2dev(&pd_chan->chan), "scanned %d descriptors\n", i); + + if (!ret) { + ret = pdc_alloc_desc(&pd_chan->chan, GFP_NOIO); + if (ret) { + spin_lock_bh(&pd_chan->lock); + pd_chan->descs_allocated++; + spin_unlock_bh(&pd_chan->lock); + } else { + dev_err(chan2dev(&pd_chan->chan), + "failed to alloc desc\n"); + } + } + + return ret; +} + +static void pdc_desc_put(struct pch_dma_chan *pd_chan, + struct pch_dma_desc *desc) +{ + if (desc) { + spin_lock_bh(&pd_chan->lock); + list_splice_init(&desc->tx_list, &pd_chan->free_list); + list_add(&desc->desc_node, &pd_chan->free_list); + spin_unlock_bh(&pd_chan->lock); + } +} + +static int pd_alloc_chan_resources(struct dma_chan *chan) +{ + struct pch_dma_chan *pd_chan = to_pd_chan(chan); + struct pch_dma_desc *desc; + LIST_HEAD(tmp_list); + int i; + + if (!pdc_is_idle(pd_chan)) { + dev_dbg(chan2dev(chan), "DMA channel not idle ?\n"); + return -EIO; + } + + if (!list_empty(&pd_chan->free_list)) + return pd_chan->descs_allocated; + + for (i = 0; i < init_nr_desc_per_channel; i++) { + desc = pdc_alloc_desc(chan, GFP_KERNEL); + + if (!desc) { + dev_warn(chan2dev(chan), + "Only allocated %d initial descriptors\n", i); + break; + } + + list_add_tail(&desc->desc_node, &tmp_list); + } + + spin_lock_bh(&pd_chan->lock); + list_splice(&tmp_list, &pd_chan->free_list); + pd_chan->descs_allocated = i; + pd_chan->completed_cookie = chan->cookie = 1; + spin_unlock_bh(&pd_chan->lock); + + pdc_enable_irq(chan, 1); + pdc_set_dir(chan); + + return pd_chan->descs_allocated; +} + +static void pd_free_chan_resources(struct dma_chan *chan) +{ + struct pch_dma_chan *pd_chan = to_pd_chan(chan); + struct pch_dma *pd = to_pd(chan->device); + struct pch_dma_desc *desc, *_d; + LIST_HEAD(tmp_list); + + BUG_ON(!pdc_is_idle(pd_chan)); + BUG_ON(!list_empty(&pd_chan->active_list)); + BUG_ON(!list_empty(&pd_chan->queue)); + + spin_lock_bh(&pd_chan->lock); + list_splice_init(&pd_chan->free_list, &tmp_list); + pd_chan->descs_allocated = 0; + spin_unlock_bh(&pd_chan->lock); + + list_for_each_entry_safe(desc, _d, &tmp_list, desc_node) + pci_pool_free(pd->pool, desc, desc->txd.phys); + + pdc_enable_irq(chan, 0); +} + +static enum dma_status pd_tx_status(struct dma_chan *chan, dma_cookie_t cookie, + struct dma_tx_state *txstate) +{ + struct pch_dma_chan *pd_chan = to_pd_chan(chan); + dma_cookie_t last_used; + dma_cookie_t last_completed; + int ret; + + spin_lock_bh(&pd_chan->lock); + last_completed = pd_chan->completed_cookie; + last_used = chan->cookie; + spin_unlock_bh(&pd_chan->lock); + + ret = dma_async_is_complete(cookie, last_completed, last_used); + + dma_set_tx_state(txstate, last_completed, last_used, 0); + + return ret; +} + +static void pd_issue_pending(struct dma_chan *chan) +{ + struct pch_dma_chan *pd_chan = to_pd_chan(chan); + + if (pdc_is_idle(pd_chan)) { + spin_lock_bh(&pd_chan->lock); + pdc_advance_work(pd_chan); + spin_unlock_bh(&pd_chan->lock); + } +} + +static struct dma_async_tx_descriptor *pd_prep_slave_sg(struct dma_chan *chan, + struct scatterlist *sgl, unsigned int sg_len, + enum dma_data_direction direction, unsigned long flags) +{ + struct pch_dma_chan *pd_chan = to_pd_chan(chan); + struct pch_dma_slave *pd_slave = chan->private; + struct pch_dma_desc *first = NULL; + struct pch_dma_desc *prev = NULL; + struct pch_dma_desc *desc = NULL; + struct scatterlist *sg; + dma_addr_t reg; + int i; + + if (unlikely(!sg_len)) { + dev_info(chan2dev(chan), "prep_slave_sg: length is zero!\n"); + return NULL; + } + + if (direction == DMA_FROM_DEVICE) + reg = pd_slave->rx_reg; + else if (direction == DMA_TO_DEVICE) + reg = pd_slave->tx_reg; + else + return NULL; + + for_each_sg(sgl, sg, sg_len, i) { + desc = pdc_desc_get(pd_chan); + + if (!desc) + goto err_desc_get; + + desc->regs.dev_addr = reg; + desc->regs.mem_addr = sg_phys(sg); + desc->regs.size = sg_dma_len(sg); + desc->regs.next = DMA_DESC_FOLLOW_WITHOUT_IRQ; + + switch (pd_slave->width) { + case PCH_DMA_WIDTH_1_BYTE: + if (desc->regs.size > DMA_DESC_MAX_COUNT_1_BYTE) + goto err_desc_get; + desc->regs.size |= DMA_DESC_WIDTH_1_BYTE; + break; + case PCH_DMA_WIDTH_2_BYTES: + if (desc->regs.size > DMA_DESC_MAX_COUNT_2_BYTES) + goto err_desc_get; + desc->regs.size |= DMA_DESC_WIDTH_2_BYTES; + break; + case PCH_DMA_WIDTH_4_BYTES: + if (desc->regs.size > DMA_DESC_MAX_COUNT_4_BYTES) + goto err_desc_get; + desc->regs.size |= DMA_DESC_WIDTH_4_BYTES; + break; + default: + goto err_desc_get; + } + + + if (!first) { + first = desc; + } else { + prev->regs.next |= desc->txd.phys; + list_add_tail(&desc->desc_node, &first->tx_list); + } + + prev = desc; + } + + if (flags & DMA_PREP_INTERRUPT) + desc->regs.next = DMA_DESC_END_WITH_IRQ; + else + desc->regs.next = DMA_DESC_END_WITHOUT_IRQ; + + first->txd.cookie = -EBUSY; + desc->txd.flags = flags; + + return &first->txd; + +err_desc_get: + dev_err(chan2dev(chan), "failed to get desc or wrong parameters\n"); + pdc_desc_put(pd_chan, first); + return NULL; +} + +static int pd_device_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct pch_dma_chan *pd_chan = to_pd_chan(chan); + struct pch_dma_desc *desc, *_d; + LIST_HEAD(list); + + if (cmd != DMA_TERMINATE_ALL) + return -ENXIO; + + spin_lock_bh(&pd_chan->lock); + + pdc_set_mode(&pd_chan->chan, DMA_CTL0_DISABLE); + + list_splice_init(&pd_chan->active_list, &list); + list_splice_init(&pd_chan->queue, &list); + + list_for_each_entry_safe(desc, _d, &list, desc_node) + pdc_chain_complete(pd_chan, desc); + + spin_unlock_bh(&pd_chan->lock); + + + return 0; +} + +static void pdc_tasklet(unsigned long data) +{ + struct pch_dma_chan *pd_chan = (struct pch_dma_chan *)data; + + if (!pdc_is_idle(pd_chan)) { + dev_err(chan2dev(&pd_chan->chan), + "BUG: handle non-idle channel in tasklet\n"); + return; + } + + spin_lock_bh(&pd_chan->lock); + if (test_and_clear_bit(0, &pd_chan->err_status)) + pdc_handle_error(pd_chan); + else + pdc_advance_work(pd_chan); + spin_unlock_bh(&pd_chan->lock); +} + +static irqreturn_t pd_irq(int irq, void *devid) +{ + struct pch_dma *pd = (struct pch_dma *)devid; + struct pch_dma_chan *pd_chan; + u32 sts0; + int i; + int ret = IRQ_NONE; + + sts0 = dma_readl(pd, STS0); + + dev_dbg(pd->dma.dev, "pd_irq sts0: %x\n", sts0); + + for (i = 0; i < pd->dma.chancnt; i++) { + pd_chan = &pd->channels[i]; + + if (sts0 & DMA_STATUS_IRQ(i)) { + if (sts0 & DMA_STATUS_ERR(i)) + set_bit(0, &pd_chan->err_status); + + tasklet_schedule(&pd_chan->tasklet); + ret = IRQ_HANDLED; + } + + } + + /* clear interrupt bits in status register */ + dma_writel(pd, STS0, sts0); + + return ret; +} + +static void pch_dma_save_regs(struct pch_dma *pd) +{ + struct pch_dma_chan *pd_chan; + struct dma_chan *chan, *_c; + int i = 0; + + pd->regs.dma_ctl0 = dma_readl(pd, CTL0); + pd->regs.dma_ctl1 = dma_readl(pd, CTL1); + pd->regs.dma_ctl2 = dma_readl(pd, CTL2); + + list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) { + pd_chan = to_pd_chan(chan); + + pd->ch_regs[i].dev_addr = channel_readl(pd_chan, DEV_ADDR); + pd->ch_regs[i].mem_addr = channel_readl(pd_chan, MEM_ADDR); + pd->ch_regs[i].size = channel_readl(pd_chan, SIZE); + pd->ch_regs[i].next = channel_readl(pd_chan, NEXT); + + i++; + } +} + +static void pch_dma_restore_regs(struct pch_dma *pd) +{ + struct pch_dma_chan *pd_chan; + struct dma_chan *chan, *_c; + int i = 0; + + dma_writel(pd, CTL0, pd->regs.dma_ctl0); + dma_writel(pd, CTL1, pd->regs.dma_ctl1); + dma_writel(pd, CTL2, pd->regs.dma_ctl2); + + list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) { + pd_chan = to_pd_chan(chan); + + channel_writel(pd_chan, DEV_ADDR, pd->ch_regs[i].dev_addr); + channel_writel(pd_chan, MEM_ADDR, pd->ch_regs[i].mem_addr); + channel_writel(pd_chan, SIZE, pd->ch_regs[i].size); + channel_writel(pd_chan, NEXT, pd->ch_regs[i].next); + + i++; + } +} + +static int pch_dma_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct pch_dma *pd = pci_get_drvdata(pdev); + + if (pd) + pch_dma_save_regs(pd); + + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int pch_dma_resume(struct pci_dev *pdev) +{ + struct pch_dma *pd = pci_get_drvdata(pdev); + int err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + err = pci_enable_device(pdev); + if (err) { + dev_dbg(&pdev->dev, "failed to enable device\n"); + return err; + } + + if (pd) + pch_dma_restore_regs(pd); + + return 0; +} + +static int __devinit pch_dma_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct pch_dma *pd; + struct pch_dma_regs *regs; + unsigned int nr_channels; + int err; + int i; + + nr_channels = id->driver_data; + pd = kzalloc(sizeof(struct pch_dma)+ + sizeof(struct pch_dma_chan) * nr_channels, GFP_KERNEL); + if (!pd) + return -ENOMEM; + + pci_set_drvdata(pdev, pd); + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "Cannot enable PCI device\n"); + goto err_free_mem; + } + + if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { + dev_err(&pdev->dev, "Cannot find proper base address\n"); + goto err_disable_pdev; + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + dev_err(&pdev->dev, "Cannot obtain PCI resources\n"); + goto err_disable_pdev; + } + + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + dev_err(&pdev->dev, "Cannot set proper DMA config\n"); + goto err_free_res; + } + + regs = pd->membase = pci_iomap(pdev, 1, 0); + if (!pd->membase) { + dev_err(&pdev->dev, "Cannot map MMIO registers\n"); + err = -ENOMEM; + goto err_free_res; + } + + pci_set_master(pdev); + + err = request_irq(pdev->irq, pd_irq, IRQF_SHARED, DRV_NAME, pd); + if (err) { + dev_err(&pdev->dev, "Failed to request IRQ\n"); + goto err_iounmap; + } + + pd->pool = pci_pool_create("pch_dma_desc_pool", pdev, + sizeof(struct pch_dma_desc), 4, 0); + if (!pd->pool) { + dev_err(&pdev->dev, "Failed to alloc DMA descriptors\n"); + err = -ENOMEM; + goto err_free_irq; + } + + pd->dma.dev = &pdev->dev; + pd->dma.chancnt = nr_channels; + + INIT_LIST_HEAD(&pd->dma.channels); + + for (i = 0; i < nr_channels; i++) { + struct pch_dma_chan *pd_chan = &pd->channels[i]; + + pd_chan->chan.device = &pd->dma; + pd_chan->chan.cookie = 1; + pd_chan->chan.chan_id = i; + + pd_chan->membase = ®s->desc[i]; + + pd_chan->dir = (i % 2) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + + spin_lock_init(&pd_chan->lock); + + INIT_LIST_HEAD(&pd_chan->active_list); + INIT_LIST_HEAD(&pd_chan->queue); + INIT_LIST_HEAD(&pd_chan->free_list); + + tasklet_init(&pd_chan->tasklet, pdc_tasklet, + (unsigned long)pd_chan); + list_add_tail(&pd_chan->chan.device_node, &pd->dma.channels); + } + + dma_cap_zero(pd->dma.cap_mask); + dma_cap_set(DMA_PRIVATE, pd->dma.cap_mask); + dma_cap_set(DMA_SLAVE, pd->dma.cap_mask); + + pd->dma.device_alloc_chan_resources = pd_alloc_chan_resources; + pd->dma.device_free_chan_resources = pd_free_chan_resources; + pd->dma.device_tx_status = pd_tx_status; + pd->dma.device_issue_pending = pd_issue_pending; + pd->dma.device_prep_slave_sg = pd_prep_slave_sg; + pd->dma.device_control = pd_device_control; + + err = dma_async_device_register(&pd->dma); + if (err) { + dev_err(&pdev->dev, "Failed to register DMA device\n"); + goto err_free_pool; + } + + return 0; + +err_free_pool: + pci_pool_destroy(pd->pool); +err_free_irq: + free_irq(pdev->irq, pd); +err_iounmap: + pci_iounmap(pdev, pd->membase); +err_free_res: + pci_release_regions(pdev); +err_disable_pdev: + pci_disable_device(pdev); +err_free_mem: + return err; +} + +static void __devexit pch_dma_remove(struct pci_dev *pdev) +{ + struct pch_dma *pd = pci_get_drvdata(pdev); + struct pch_dma_chan *pd_chan; + struct dma_chan *chan, *_c; + + if (pd) { + dma_async_device_unregister(&pd->dma); + + list_for_each_entry_safe(chan, _c, &pd->dma.channels, + device_node) { + pd_chan = to_pd_chan(chan); + + tasklet_disable(&pd_chan->tasklet); + tasklet_kill(&pd_chan->tasklet); + } + + pci_pool_destroy(pd->pool); + free_irq(pdev->irq, pd); + pci_iounmap(pdev, pd->membase); + pci_release_regions(pdev); + pci_disable_device(pdev); + kfree(pd); + } +} + +/* PCI Device ID of DMA device */ +#define PCI_DEVICE_ID_PCH_DMA_8CH 0x8810 +#define PCI_DEVICE_ID_PCH_DMA_4CH 0x8815 + +static const struct pci_device_id pch_dma_id_table[] = { + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_DMA_8CH), 8 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_DMA_4CH), 4 }, +}; + +static struct pci_driver pch_dma_driver = { + .name = DRV_NAME, + .id_table = pch_dma_id_table, + .probe = pch_dma_probe, + .remove = __devexit_p(pch_dma_remove), +#ifdef CONFIG_PM + .suspend = pch_dma_suspend, + .resume = pch_dma_resume, +#endif +}; + +static int __init pch_dma_init(void) +{ + return pci_register_driver(&pch_dma_driver); +} + +static void __exit pch_dma_exit(void) +{ + pci_unregister_driver(&pch_dma_driver); +} + +module_init(pch_dma_init); +module_exit(pch_dma_exit); + +MODULE_DESCRIPTION("Topcliff PCH DMA controller driver"); +MODULE_AUTHOR("Yong Wang <yong.y.wang@intel.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index c426829..17e2600 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -30,14 +30,16 @@ /* Maximum iterations taken before giving up suspending a channel */ #define D40_SUSPEND_MAX_IT 500 +/* Hardware requirement on LCLA alignment */ +#define LCLA_ALIGNMENT 0x40000 +/* Attempts before giving up to trying to get pages that are aligned */ +#define MAX_LCLA_ALLOC_ATTEMPTS 256 + +/* Bit markings for allocation map */ #define D40_ALLOC_FREE (1 << 31) #define D40_ALLOC_PHY (1 << 30) #define D40_ALLOC_LOG_FREE 0 -/* The number of free d40_desc to keep in memory before starting - * to kfree() them */ -#define D40_DESC_CACHE_SIZE 50 - /* Hardware designer of the block */ #define D40_PERIPHID2_DESIGNER 0x8 @@ -68,9 +70,9 @@ enum d40_command { */ struct d40_lli_pool { void *base; - int size; + int size; /* Space for dst and src, plus an extra for padding */ - u8 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)]; + u8 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)]; }; /** @@ -81,9 +83,10 @@ struct d40_lli_pool { * lli_len equals one. * @lli_log: Same as above but for logical channels. * @lli_pool: The pool with two entries pre-allocated. - * @lli_len: Number of LLI's in lli_pool - * @lli_tcount: Number of LLIs processed in the transfer. When equals lli_len - * then this transfer job is done. + * @lli_len: Number of llis of current descriptor. + * @lli_count: Number of transfered llis. + * @lli_tx_len: Max number of LLIs per transfer, there can be + * many transfer for one descriptor. * @txd: DMA engine struct. Used for among other things for communication * during a transfer. * @node: List entry. @@ -100,8 +103,9 @@ struct d40_desc { struct d40_log_lli_bidir lli_log; struct d40_lli_pool lli_pool; - u32 lli_len; - u32 lli_tcount; + int lli_len; + int lli_count; + u32 lli_tx_len; struct dma_async_tx_descriptor txd; struct list_head node; @@ -113,18 +117,20 @@ struct d40_desc { /** * struct d40_lcla_pool - LCLA pool settings and data. * - * @base: The virtual address of LCLA. - * @phy: Physical base address of LCLA. - * @base_size: size of lcla. + * @base: The virtual address of LCLA. 18 bit aligned. + * @base_unaligned: The orignal kmalloc pointer, if kmalloc is used. + * This pointer is only there for clean-up on error. + * @pages: The number of pages needed for all physical channels. + * Only used later for clean-up on error * @lock: Lock to protect the content in this struct. - * @alloc_map: Mapping between physical channel and LCLA entries. + * @alloc_map: Bitmap mapping between physical channel and LCLA entries. * @num_blocks: The number of entries of alloc_map. Equals to the * number of physical channels. */ struct d40_lcla_pool { void *base; - dma_addr_t phy; - resource_size_t base_size; + void *base_unaligned; + int pages; spinlock_t lock; u32 *alloc_map; int num_blocks; @@ -163,15 +169,14 @@ struct d40_base; * @pending_tx: The number of pending transfers. Used between interrupt handler * and tasklet. * @busy: Set to true when transfer is ongoing on this channel. - * @phy_chan: Pointer to physical channel which this instance runs on. + * @phy_chan: Pointer to physical channel which this instance runs on. If this + * point is NULL, then the channel is not allocated. * @chan: DMA engine handle. * @tasklet: Tasklet that gets scheduled from interrupt context to complete a * transfer and call client callback. * @client: Cliented owned descriptor list. * @active: Active descriptor. * @queue: Queued jobs. - * @free: List of free descripts, ready to be reused. - * @free_len: Number of descriptors in the free list. * @dma_cfg: The client configuration of this dma channel. * @base: Pointer to the device instance struct. * @src_def_cfg: Default cfg register setting for src. @@ -195,8 +200,6 @@ struct d40_chan { struct list_head client; struct list_head active; struct list_head queue; - struct list_head free; - int free_len; struct stedma40_chan_cfg dma_cfg; struct d40_base *base; /* Default register configurations */ @@ -205,6 +208,9 @@ struct d40_chan { struct d40_def_lcsp log_def; struct d40_lcla_elem lcla; struct d40_log_lli_full *lcpa; + /* Runtime reconfiguration */ + dma_addr_t runtime_addr; + enum dma_data_direction runtime_direction; }; /** @@ -215,6 +221,7 @@ struct d40_chan { * the same physical register. * @dev: The device structure. * @virtbase: The virtual base address of the DMA's register. + * @rev: silicon revision detected. * @clk: Pointer to the DMA clock structure. * @phy_start: Physical memory start of the DMA registers. * @phy_size: Size of the DMA register map. @@ -240,12 +247,14 @@ struct d40_chan { * @lcpa_base: The virtual mapped address of LCPA. * @phy_lcpa: The physical address of the LCPA. * @lcpa_size: The size of the LCPA area. + * @desc_slab: cache for descriptors. */ struct d40_base { spinlock_t interrupt_lock; spinlock_t execmd_lock; struct device *dev; void __iomem *virtbase; + u8 rev:4; struct clk *clk; phys_addr_t phy_start; resource_size_t phy_size; @@ -266,6 +275,7 @@ struct d40_base { void *lcpa_base; dma_addr_t phy_lcpa; resource_size_t lcpa_size; + struct kmem_cache *desc_slab; }; /** @@ -365,11 +375,6 @@ static dma_cookie_t d40_assign_cookie(struct d40_chan *d40c, return cookie; } -static void d40_desc_reset(struct d40_desc *d40d) -{ - d40d->lli_tcount = 0; -} - static void d40_desc_remove(struct d40_desc *d40d) { list_del(&d40d->node); @@ -377,7 +382,6 @@ static void d40_desc_remove(struct d40_desc *d40d) static struct d40_desc *d40_desc_get(struct d40_chan *d40c) { - struct d40_desc *desc; struct d40_desc *d; struct d40_desc *_d; @@ -386,36 +390,21 @@ static struct d40_desc *d40_desc_get(struct d40_chan *d40c) if (async_tx_test_ack(&d->txd)) { d40_pool_lli_free(d); d40_desc_remove(d); - desc = d; - goto out; + break; } - } - - if (list_empty(&d40c->free)) { - /* Alloc new desc because we're out of used ones */ - desc = kzalloc(sizeof(struct d40_desc), GFP_NOWAIT); - if (desc == NULL) - goto out; - INIT_LIST_HEAD(&desc->node); } else { - /* Reuse an old desc. */ - desc = list_first_entry(&d40c->free, - struct d40_desc, - node); - list_del(&desc->node); - d40c->free_len--; + d = kmem_cache_alloc(d40c->base->desc_slab, GFP_NOWAIT); + if (d != NULL) { + memset(d, 0, sizeof(struct d40_desc)); + INIT_LIST_HEAD(&d->node); + } } -out: - return desc; + return d; } static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d) { - if (d40c->free_len < D40_DESC_CACHE_SIZE) { - list_add_tail(&d40d->node, &d40c->free); - d40c->free_len++; - } else - kfree(d40d); + kmem_cache_free(d40c->base->desc_slab, d40d); } static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc) @@ -456,37 +445,41 @@ static struct d40_desc *d40_first_queued(struct d40_chan *d40c) /* Support functions for logical channels */ -static int d40_lcla_id_get(struct d40_chan *d40c, - struct d40_lcla_pool *pool) +static int d40_lcla_id_get(struct d40_chan *d40c) { int src_id = 0; int dst_id = 0; struct d40_log_lli *lcla_lidx_base = - pool->base + d40c->phy_chan->num * 1024; + d40c->base->lcla_pool.base + d40c->phy_chan->num * 1024; int i; int lli_per_log = d40c->base->plat_data->llis_per_log; + unsigned long flags; if (d40c->lcla.src_id >= 0 && d40c->lcla.dst_id >= 0) return 0; - if (pool->num_blocks > 32) + if (d40c->base->lcla_pool.num_blocks > 32) return -EINVAL; - spin_lock(&pool->lock); + spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags); - for (i = 0; i < pool->num_blocks; i++) { - if (!(pool->alloc_map[d40c->phy_chan->num] & (0x1 << i))) { - pool->alloc_map[d40c->phy_chan->num] |= (0x1 << i); + for (i = 0; i < d40c->base->lcla_pool.num_blocks; i++) { + if (!(d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] & + (0x1 << i))) { + d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] |= + (0x1 << i); break; } } src_id = i; - if (src_id >= pool->num_blocks) + if (src_id >= d40c->base->lcla_pool.num_blocks) goto err; - for (; i < pool->num_blocks; i++) { - if (!(pool->alloc_map[d40c->phy_chan->num] & (0x1 << i))) { - pool->alloc_map[d40c->phy_chan->num] |= (0x1 << i); + for (; i < d40c->base->lcla_pool.num_blocks; i++) { + if (!(d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] & + (0x1 << i))) { + d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] |= + (0x1 << i); break; } } @@ -500,28 +493,13 @@ static int d40_lcla_id_get(struct d40_chan *d40c, d40c->lcla.dst = lcla_lidx_base + dst_id * lli_per_log + 1; d40c->lcla.src = lcla_lidx_base + src_id * lli_per_log + 1; - - spin_unlock(&pool->lock); + spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags); return 0; err: - spin_unlock(&pool->lock); + spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags); return -EINVAL; } -static void d40_lcla_id_put(struct d40_chan *d40c, - struct d40_lcla_pool *pool, - int id) -{ - if (id < 0) - return; - - d40c->lcla.src_id = -1; - d40c->lcla.dst_id = -1; - - spin_lock(&pool->lock); - pool->alloc_map[d40c->phy_chan->num] &= (~(0x1 << id)); - spin_unlock(&pool->lock); -} static int d40_channel_execute_command(struct d40_chan *d40c, enum d40_command command) @@ -530,6 +508,7 @@ static int d40_channel_execute_command(struct d40_chan *d40c, void __iomem *active_reg; int ret = 0; unsigned long flags; + u32 wmask; spin_lock_irqsave(&d40c->base->execmd_lock, flags); @@ -547,7 +526,9 @@ static int d40_channel_execute_command(struct d40_chan *d40c, goto done; } - writel(command << D40_CHAN_POS(d40c->phy_chan->num), active_reg); + wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num)); + writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)), + active_reg); if (command == D40_DMA_SUSPEND_REQ) { @@ -586,8 +567,7 @@ done: static void d40_term_all(struct d40_chan *d40c) { struct d40_desc *d40d; - struct d40_desc *d; - struct d40_desc *_d; + unsigned long flags; /* Release active descriptors */ while ((d40d = d40_first_active_get(d40c))) { @@ -605,19 +585,17 @@ static void d40_term_all(struct d40_chan *d40c) d40_desc_free(d40c, d40d); } - /* Release client owned descriptors */ - if (!list_empty(&d40c->client)) - list_for_each_entry_safe(d, _d, &d40c->client, node) { - d40_pool_lli_free(d); - d40_desc_remove(d); - /* Return desc to free-list */ - d40_desc_free(d40c, d40d); - } + spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags); + + d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] &= + (~(0x1 << d40c->lcla.dst_id)); + d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] &= + (~(0x1 << d40c->lcla.src_id)); + + d40c->lcla.src_id = -1; + d40c->lcla.dst_id = -1; - d40_lcla_id_put(d40c, &d40c->base->lcla_pool, - d40c->lcla.src_id); - d40_lcla_id_put(d40c, &d40c->base->lcla_pool, - d40c->lcla.dst_id); + spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags); d40c->pending_tx = 0; d40c->busy = false; @@ -628,6 +606,7 @@ static void d40_config_set_event(struct d40_chan *d40c, bool do_enable) u32 val; unsigned long flags; + /* Notice, that disable requires the physical channel to be stopped */ if (do_enable) val = D40_ACTIVATE_EVENTLINE; else @@ -732,31 +711,34 @@ static int d40_config_write(struct d40_chan *d40c) static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d) { - if (d40d->lli_phy.dst && d40d->lli_phy.src) { d40_phy_lli_write(d40c->base->virtbase, d40c->phy_chan->num, d40d->lli_phy.dst, d40d->lli_phy.src); - d40d->lli_tcount = d40d->lli_len; } else if (d40d->lli_log.dst && d40d->lli_log.src) { - u32 lli_len; struct d40_log_lli *src = d40d->lli_log.src; struct d40_log_lli *dst = d40d->lli_log.dst; - - src += d40d->lli_tcount; - dst += d40d->lli_tcount; - - if (d40d->lli_len <= d40c->base->plat_data->llis_per_log) - lli_len = d40d->lli_len; - else - lli_len = d40c->base->plat_data->llis_per_log; - d40d->lli_tcount += lli_len; - d40_log_lli_write(d40c->lcpa, d40c->lcla.src, - d40c->lcla.dst, - dst, src, - d40c->base->plat_data->llis_per_log); + int s; + + src += d40d->lli_count; + dst += d40d->lli_count; + s = d40_log_lli_write(d40c->lcpa, + d40c->lcla.src, d40c->lcla.dst, + dst, src, + d40c->base->plat_data->llis_per_log); + + /* If s equals to zero, the job is not linked */ + if (s > 0) { + (void) dma_map_single(d40c->base->dev, d40c->lcla.src, + s * sizeof(struct d40_log_lli), + DMA_TO_DEVICE); + (void) dma_map_single(d40c->base->dev, d40c->lcla.dst, + s * sizeof(struct d40_log_lli), + DMA_TO_DEVICE); + } } + d40d->lli_count += d40d->lli_tx_len; } static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) @@ -780,18 +762,21 @@ static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) static int d40_start(struct d40_chan *d40c) { - int err; + if (d40c->base->rev == 0) { + int err; - if (d40c->log_num != D40_PHY_CHAN) { - err = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); - if (err) - return err; - d40_config_set_event(d40c, true); + if (d40c->log_num != D40_PHY_CHAN) { + err = d40_channel_execute_command(d40c, + D40_DMA_SUSPEND_REQ); + if (err) + return err; + } } - err = d40_channel_execute_command(d40c, D40_DMA_RUN); + if (d40c->log_num != D40_PHY_CHAN) + d40_config_set_event(d40c, true); - return err; + return d40_channel_execute_command(d40c, D40_DMA_RUN); } static struct d40_desc *d40_queue_start(struct d40_chan *d40c) @@ -838,7 +823,7 @@ static void dma_tc_handle(struct d40_chan *d40c) if (d40d == NULL) return; - if (d40d->lli_tcount < d40d->lli_len) { + if (d40d->lli_count < d40d->lli_len) { d40_desc_load(d40c, d40d); /* Start dma job */ @@ -891,7 +876,6 @@ static void dma_tasklet(unsigned long data) /* Return desc to free-list */ d40_desc_free(d40c, d40d_fin); } else { - d40_desc_reset(d40d_fin); if (!d40d_fin->is_in_client_list) { d40_desc_remove(d40d_fin); list_add_tail(&d40d_fin->node, &d40c->client); @@ -975,7 +959,8 @@ static irqreturn_t d40_handle_interrupt(int irq, void *data) if (!il[row].is_error) dma_tc_handle(d40c); else - dev_err(base->dev, "[%s] IRQ chan: %ld offset %d idx %d\n", + dev_err(base->dev, + "[%s] IRQ chan: %ld offset %d idx %d\n", __func__, chan, il[row].offset, idx); spin_unlock(&d40c->lock); @@ -1134,7 +1119,8 @@ static int d40_allocate_channel(struct d40_chan *d40c) int j; int log_num; bool is_src; - bool is_log = (d40c->dma_cfg.channel_type & STEDMA40_CHANNEL_IN_OPER_MODE) + bool is_log = (d40c->dma_cfg.channel_type & + STEDMA40_CHANNEL_IN_OPER_MODE) == STEDMA40_CHANNEL_IN_LOG_MODE; @@ -1169,8 +1155,10 @@ static int d40_allocate_channel(struct d40_chan *d40c) for (j = 0; j < d40c->base->num_phy_chans; j += 8) { int phy_num = j + event_group * 2; for (i = phy_num; i < phy_num + 2; i++) { - if (d40_alloc_mask_set(&phys[i], is_src, - 0, is_log)) + if (d40_alloc_mask_set(&phys[i], + is_src, + 0, + is_log)) goto found_phy; } } @@ -1221,30 +1209,6 @@ out: } -static int d40_config_chan(struct d40_chan *d40c, - struct stedma40_chan_cfg *info) -{ - - /* Fill in basic CFG register values */ - d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg, - &d40c->dst_def_cfg, d40c->log_num != D40_PHY_CHAN); - - if (d40c->log_num != D40_PHY_CHAN) { - d40_log_cfg(&d40c->dma_cfg, - &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); - - if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) - d40c->lcpa = d40c->base->lcpa_base + - d40c->dma_cfg.src_dev_type * 32; - else - d40c->lcpa = d40c->base->lcpa_base + - d40c->dma_cfg.dst_dev_type * 32 + 16; - } - - /* Write channel configuration to the DMA */ - return d40_config_write(d40c); -} - static int d40_config_memcpy(struct d40_chan *d40c) { dma_cap_mask_t cap = d40c->chan.device->cap_mask; @@ -1272,13 +1236,25 @@ static int d40_free_dma(struct d40_chan *d40c) { int res = 0; - u32 event, dir; + u32 event; struct d40_phy_res *phy = d40c->phy_chan; bool is_src; + struct d40_desc *d; + struct d40_desc *_d; + /* Terminate all queued and active transfers */ d40_term_all(d40c); + /* Release client owned descriptors */ + if (!list_empty(&d40c->client)) + list_for_each_entry_safe(d, _d, &d40c->client, node) { + d40_pool_lli_free(d); + d40_desc_remove(d); + /* Return desc to free-list */ + d40_desc_free(d40c, d); + } + if (phy == NULL) { dev_err(&d40c->chan.dev->device, "[%s] phy == null\n", __func__); @@ -1292,22 +1268,12 @@ static int d40_free_dma(struct d40_chan *d40c) return -EINVAL; } - - res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); - if (res) { - dev_err(&d40c->chan.dev->device, "[%s] suspend\n", - __func__); - return res; - } - if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH || d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) { event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type); - dir = D40_CHAN_REG_SDLNK; is_src = false; } else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) { event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type); - dir = D40_CHAN_REG_SSLNK; is_src = true; } else { dev_err(&d40c->chan.dev->device, @@ -1315,16 +1281,17 @@ static int d40_free_dma(struct d40_chan *d40c) return -EINVAL; } + res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); + if (res) { + dev_err(&d40c->chan.dev->device, "[%s] suspend failed\n", + __func__); + return res; + } + if (d40c->log_num != D40_PHY_CHAN) { - /* - * Release logical channel, deactivate the event line during - * the time physical res is suspended. - */ - writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) & - D40_EVENTLINE_MASK(event), - d40c->base->virtbase + D40_DREG_PCBASE + - phy->num * D40_DREG_PCDELTA + dir); + /* Release logical channel, deactivate the event line */ + d40_config_set_event(d40c, false); d40c->base->lookup_log_chans[d40c->log_num] = NULL; /* @@ -1345,8 +1312,9 @@ static int d40_free_dma(struct d40_chan *d40c) } return 0; } - } else - d40_alloc_mask_free(phy, is_src, 0); + } else { + (void) d40_alloc_mask_free(phy, is_src, 0); + } /* Release physical channel */ res = d40_channel_execute_command(d40c, D40_DMA_STOP); @@ -1361,8 +1329,6 @@ static int d40_free_dma(struct d40_chan *d40c) d40c->base->lookup_phy_chans[phy->num] = NULL; return 0; - - } static int d40_pause(struct dma_chan *chan) @@ -1370,7 +1336,6 @@ static int d40_pause(struct dma_chan *chan) struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); int res; - unsigned long flags; spin_lock_irqsave(&d40c->lock, flags); @@ -1397,7 +1362,6 @@ static bool d40_is_paused(struct d40_chan *d40c) void __iomem *active_reg; u32 status; u32 event; - int res; spin_lock_irqsave(&d40c->lock, flags); @@ -1416,10 +1380,6 @@ static bool d40_is_paused(struct d40_chan *d40c) goto _exit; } - res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); - if (res != 0) - goto _exit; - if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH || d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type); @@ -1436,12 +1396,6 @@ static bool d40_is_paused(struct d40_chan *d40c) if (status != D40_DMA_RUN) is_paused = true; - - /* Resume the other logical channels if any */ - if (d40_chan_has_events(d40c)) - res = d40_channel_execute_command(d40c, - D40_DMA_RUN); - _exit: spin_unlock_irqrestore(&d40c->lock, flags); return is_paused; @@ -1468,13 +1422,14 @@ static u32 d40_residue(struct d40_chan *d40c) u32 num_elt; if (d40c->log_num != D40_PHY_CHAN) - num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK) + num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK) >> D40_MEM_LCSP2_ECNT_POS; else num_elt = (readl(d40c->base->virtbase + D40_DREG_PCBASE + d40c->phy_chan->num * D40_DREG_PCDELTA + D40_CHAN_REG_SDELT) & - D40_SREG_ELEM_PHY_ECNT_MASK) >> D40_SREG_ELEM_PHY_ECNT_POS; + D40_SREG_ELEM_PHY_ECNT_MASK) >> + D40_SREG_ELEM_PHY_ECNT_POS; return num_elt * (1 << d40c->dma_cfg.dst_info.data_width); } @@ -1487,20 +1442,21 @@ static int d40_resume(struct dma_chan *chan) spin_lock_irqsave(&d40c->lock, flags); - if (d40c->log_num != D40_PHY_CHAN) { - res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); - if (res) - goto out; + if (d40c->base->rev == 0) + if (d40c->log_num != D40_PHY_CHAN) { + res = d40_channel_execute_command(d40c, + D40_DMA_SUSPEND_REQ); + goto no_suspend; + } - /* If bytes left to transfer or linked tx resume job */ - if (d40_residue(d40c) || d40_tx_is_linked(d40c)) { + /* If bytes left to transfer or linked tx resume job */ + if (d40_residue(d40c) || d40_tx_is_linked(d40c)) { + if (d40c->log_num != D40_PHY_CHAN) d40_config_set_event(d40c, true); - res = d40_channel_execute_command(d40c, D40_DMA_RUN); - } - } else if (d40_residue(d40c) || d40_tx_is_linked(d40c)) res = d40_channel_execute_command(d40c, D40_DMA_RUN); + } -out: +no_suspend: spin_unlock_irqrestore(&d40c->lock, flags); return res; } @@ -1534,8 +1490,10 @@ int stedma40_set_psize(struct dma_chan *chan, if (d40c->log_num != D40_PHY_CHAN) { d40c->log_def.lcsp1 &= ~D40_MEM_LCSP1_SCFG_PSIZE_MASK; d40c->log_def.lcsp3 &= ~D40_MEM_LCSP1_SCFG_PSIZE_MASK; - d40c->log_def.lcsp1 |= src_psize << D40_MEM_LCSP1_SCFG_PSIZE_POS; - d40c->log_def.lcsp3 |= dst_psize << D40_MEM_LCSP1_SCFG_PSIZE_POS; + d40c->log_def.lcsp1 |= src_psize << + D40_MEM_LCSP1_SCFG_PSIZE_POS; + d40c->log_def.lcsp3 |= dst_psize << + D40_MEM_LCSP1_SCFG_PSIZE_POS; goto out; } @@ -1566,37 +1524,42 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, struct scatterlist *sgl_dst, struct scatterlist *sgl_src, unsigned int sgl_len, - unsigned long flags) + unsigned long dma_flags) { int res; struct d40_desc *d40d; struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); - unsigned long flg; - int lli_max = d40c->base->plat_data->llis_per_log; + unsigned long flags; + if (d40c->phy_chan == NULL) { + dev_err(&d40c->chan.dev->device, + "[%s] Unallocated channel.\n", __func__); + return ERR_PTR(-EINVAL); + } - spin_lock_irqsave(&d40c->lock, flg); + spin_lock_irqsave(&d40c->lock, flags); d40d = d40_desc_get(d40c); if (d40d == NULL) goto err; - memset(d40d, 0, sizeof(struct d40_desc)); d40d->lli_len = sgl_len; - - d40d->txd.flags = flags; + d40d->lli_tx_len = d40d->lli_len; + d40d->txd.flags = dma_flags; if (d40c->log_num != D40_PHY_CHAN) { + if (d40d->lli_len > d40c->base->plat_data->llis_per_log) + d40d->lli_tx_len = d40c->base->plat_data->llis_per_log; + if (sgl_len > 1) /* * Check if there is space available in lcla. If not, * split list into 1-length and run only in lcpa * space. */ - if (d40_lcla_id_get(d40c, - &d40c->base->lcla_pool) != 0) - lli_max = 1; + if (d40_lcla_id_get(d40c) != 0) + d40d->lli_tx_len = 1; if (d40_pool_lli_alloc(d40d, sgl_len, true) < 0) { dev_err(&d40c->chan.dev->device, @@ -1610,7 +1573,8 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, d40d->lli_log.src, d40c->log_def.lcsp1, d40c->dma_cfg.src_info.data_width, - flags & DMA_PREP_INTERRUPT, lli_max, + dma_flags & DMA_PREP_INTERRUPT, + d40d->lli_tx_len, d40c->base->plat_data->llis_per_log); (void) d40_log_sg_to_lli(d40c->lcla.dst_id, @@ -1619,7 +1583,8 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, d40d->lli_log.dst, d40c->log_def.lcsp3, d40c->dma_cfg.dst_info.data_width, - flags & DMA_PREP_INTERRUPT, lli_max, + dma_flags & DMA_PREP_INTERRUPT, + d40d->lli_tx_len, d40c->base->plat_data->llis_per_log); @@ -1664,11 +1629,11 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, d40d->txd.tx_submit = d40_tx_submit; - spin_unlock_irqrestore(&d40c->lock, flg); + spin_unlock_irqrestore(&d40c->lock, flags); return &d40d->txd; err: - spin_unlock_irqrestore(&d40c->lock, flg); + spin_unlock_irqrestore(&d40c->lock, flags); return NULL; } EXPORT_SYMBOL(stedma40_memcpy_sg); @@ -1698,46 +1663,66 @@ static int d40_alloc_chan_resources(struct dma_chan *chan) unsigned long flags; struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); - + bool is_free_phy; spin_lock_irqsave(&d40c->lock, flags); d40c->completed = chan->cookie = 1; /* * If no dma configuration is set (channel_type == 0) - * use default configuration + * use default configuration (memcpy) */ if (d40c->dma_cfg.channel_type == 0) { err = d40_config_memcpy(d40c); - if (err) - goto err_alloc; + if (err) { + dev_err(&d40c->chan.dev->device, + "[%s] Failed to configure memcpy channel\n", + __func__); + goto fail; + } } + is_free_phy = (d40c->phy_chan == NULL); err = d40_allocate_channel(d40c); if (err) { dev_err(&d40c->chan.dev->device, "[%s] Failed to allocate channel\n", __func__); - goto err_alloc; + goto fail; } - err = d40_config_chan(d40c, &d40c->dma_cfg); - if (err) { - dev_err(&d40c->chan.dev->device, - "[%s] Failed to configure channel\n", - __func__); - goto err_config; - } + /* Fill in basic CFG register values */ + d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg, + &d40c->dst_def_cfg, d40c->log_num != D40_PHY_CHAN); - spin_unlock_irqrestore(&d40c->lock, flags); - return 0; + if (d40c->log_num != D40_PHY_CHAN) { + d40_log_cfg(&d40c->dma_cfg, + &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); - err_config: - (void) d40_free_dma(d40c); - err_alloc: + if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) + d40c->lcpa = d40c->base->lcpa_base + + d40c->dma_cfg.src_dev_type * D40_LCPA_CHAN_SIZE; + else + d40c->lcpa = d40c->base->lcpa_base + + d40c->dma_cfg.dst_dev_type * + D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA; + } + + /* + * Only write channel configuration to the DMA if the physical + * resource is free. In case of multiple logical channels + * on the same physical resource, only the first write is necessary. + */ + if (is_free_phy) { + err = d40_config_write(d40c); + if (err) { + dev_err(&d40c->chan.dev->device, + "[%s] Failed to configure channel\n", + __func__); + } + } +fail: spin_unlock_irqrestore(&d40c->lock, flags); - dev_err(&d40c->chan.dev->device, - "[%s] Channel allocation failed\n", __func__); - return -EINVAL; + return err; } static void d40_free_chan_resources(struct dma_chan *chan) @@ -1747,6 +1732,13 @@ static void d40_free_chan_resources(struct dma_chan *chan) int err; unsigned long flags; + if (d40c->phy_chan == NULL) { + dev_err(&d40c->chan.dev->device, + "[%s] Cannot free unallocated channel\n", __func__); + return; + } + + spin_lock_irqsave(&d40c->lock, flags); err = d40_free_dma(d40c); @@ -1761,15 +1753,21 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, size_t size, - unsigned long flags) + unsigned long dma_flags) { struct d40_desc *d40d; struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); - unsigned long flg; + unsigned long flags; int err = 0; - spin_lock_irqsave(&d40c->lock, flg); + if (d40c->phy_chan == NULL) { + dev_err(&d40c->chan.dev->device, + "[%s] Channel is not allocated.\n", __func__); + return ERR_PTR(-EINVAL); + } + + spin_lock_irqsave(&d40c->lock, flags); d40d = d40_desc_get(d40c); if (d40d == NULL) { @@ -1778,9 +1776,7 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, goto err; } - memset(d40d, 0, sizeof(struct d40_desc)); - - d40d->txd.flags = flags; + d40d->txd.flags = dma_flags; dma_async_tx_descriptor_init(&d40d->txd, chan); @@ -1794,6 +1790,7 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, goto err; } d40d->lli_len = 1; + d40d->lli_tx_len = 1; d40_log_fill_lli(d40d->lli_log.src, src, @@ -1801,7 +1798,7 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, 0, d40c->log_def.lcsp1, d40c->dma_cfg.src_info.data_width, - true, true); + false, true); d40_log_fill_lli(d40d->lli_log.dst, dst, @@ -1848,7 +1845,7 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, d40d->lli_pool.size, DMA_TO_DEVICE); } - spin_unlock_irqrestore(&d40c->lock, flg); + spin_unlock_irqrestore(&d40c->lock, flags); return &d40d->txd; err_fill_lli: @@ -1856,7 +1853,7 @@ err_fill_lli: "[%s] Failed filling in PHY LLI\n", __func__); d40_pool_lli_free(d40d); err: - spin_unlock_irqrestore(&d40c->lock, flg); + spin_unlock_irqrestore(&d40c->lock, flags); return NULL; } @@ -1865,11 +1862,10 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d, struct scatterlist *sgl, unsigned int sg_len, enum dma_data_direction direction, - unsigned long flags) + unsigned long dma_flags) { dma_addr_t dev_addr = 0; int total_size; - int lli_max = d40c->base->plat_data->llis_per_log; if (d40_pool_lli_alloc(d40d, sg_len, true) < 0) { dev_err(&d40c->chan.dev->device, @@ -1878,7 +1874,10 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d, } d40d->lli_len = sg_len; - d40d->lli_tcount = 0; + if (d40d->lli_len <= d40c->base->plat_data->llis_per_log) + d40d->lli_tx_len = d40d->lli_len; + else + d40d->lli_tx_len = d40c->base->plat_data->llis_per_log; if (sg_len > 1) /* @@ -1886,35 +1885,34 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d, * If not, split list into 1-length and run only * in lcpa space. */ - if (d40_lcla_id_get(d40c, &d40c->base->lcla_pool) != 0) - lli_max = 1; + if (d40_lcla_id_get(d40c) != 0) + d40d->lli_tx_len = 1; - if (direction == DMA_FROM_DEVICE) { - dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type]; - total_size = d40_log_sg_to_dev(&d40c->lcla, - sgl, sg_len, - &d40d->lli_log, - &d40c->log_def, - d40c->dma_cfg.src_info.data_width, - d40c->dma_cfg.dst_info.data_width, - direction, - flags & DMA_PREP_INTERRUPT, - dev_addr, lli_max, - d40c->base->plat_data->llis_per_log); - } else if (direction == DMA_TO_DEVICE) { - dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type]; - total_size = d40_log_sg_to_dev(&d40c->lcla, - sgl, sg_len, - &d40d->lli_log, - &d40c->log_def, - d40c->dma_cfg.src_info.data_width, - d40c->dma_cfg.dst_info.data_width, - direction, - flags & DMA_PREP_INTERRUPT, - dev_addr, lli_max, - d40c->base->plat_data->llis_per_log); - } else + if (direction == DMA_FROM_DEVICE) + if (d40c->runtime_addr) + dev_addr = d40c->runtime_addr; + else + dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type]; + else if (direction == DMA_TO_DEVICE) + if (d40c->runtime_addr) + dev_addr = d40c->runtime_addr; + else + dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type]; + + else return -EINVAL; + + total_size = d40_log_sg_to_dev(&d40c->lcla, + sgl, sg_len, + &d40d->lli_log, + &d40c->log_def, + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width, + direction, + dma_flags & DMA_PREP_INTERRUPT, + dev_addr, d40d->lli_tx_len, + d40c->base->plat_data->llis_per_log); + if (total_size < 0) return -EINVAL; @@ -1926,7 +1924,7 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d, struct scatterlist *sgl, unsigned int sgl_len, enum dma_data_direction direction, - unsigned long flags) + unsigned long dma_flags) { dma_addr_t src_dev_addr; dma_addr_t dst_dev_addr; @@ -1939,13 +1937,19 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d, } d40d->lli_len = sgl_len; - d40d->lli_tcount = 0; + d40d->lli_tx_len = sgl_len; if (direction == DMA_FROM_DEVICE) { dst_dev_addr = 0; - src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type]; + if (d40c->runtime_addr) + src_dev_addr = d40c->runtime_addr; + else + src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type]; } else if (direction == DMA_TO_DEVICE) { - dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type]; + if (d40c->runtime_addr) + dst_dev_addr = d40c->runtime_addr; + else + dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type]; src_dev_addr = 0; } else return -EINVAL; @@ -1983,34 +1987,38 @@ static struct dma_async_tx_descriptor *d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_data_direction direction, - unsigned long flags) + unsigned long dma_flags) { struct d40_desc *d40d; struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); - unsigned long flg; + unsigned long flags; int err; + if (d40c->phy_chan == NULL) { + dev_err(&d40c->chan.dev->device, + "[%s] Cannot prepare unallocated channel\n", __func__); + return ERR_PTR(-EINVAL); + } + if (d40c->dma_cfg.pre_transfer) d40c->dma_cfg.pre_transfer(chan, d40c->dma_cfg.pre_transfer_data, sg_dma_len(sgl)); - spin_lock_irqsave(&d40c->lock, flg); + spin_lock_irqsave(&d40c->lock, flags); d40d = d40_desc_get(d40c); - spin_unlock_irqrestore(&d40c->lock, flg); + spin_unlock_irqrestore(&d40c->lock, flags); if (d40d == NULL) return NULL; - memset(d40d, 0, sizeof(struct d40_desc)); - if (d40c->log_num != D40_PHY_CHAN) err = d40_prep_slave_sg_log(d40d, d40c, sgl, sg_len, - direction, flags); + direction, dma_flags); else err = d40_prep_slave_sg_phy(d40d, d40c, sgl, sg_len, - direction, flags); + direction, dma_flags); if (err) { dev_err(&d40c->chan.dev->device, "[%s] Failed to prepare %s slave sg job: %d\n", @@ -2019,7 +2027,7 @@ static struct dma_async_tx_descriptor *d40_prep_slave_sg(struct dma_chan *chan, return NULL; } - d40d->txd.flags = flags; + d40d->txd.flags = dma_flags; dma_async_tx_descriptor_init(&d40d->txd, chan); @@ -2037,6 +2045,13 @@ static enum dma_status d40_tx_status(struct dma_chan *chan, dma_cookie_t last_complete; int ret; + if (d40c->phy_chan == NULL) { + dev_err(&d40c->chan.dev->device, + "[%s] Cannot read status of unallocated channel\n", + __func__); + return -EINVAL; + } + last_complete = d40c->completed; last_used = chan->cookie; @@ -2056,6 +2071,12 @@ static void d40_issue_pending(struct dma_chan *chan) struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); unsigned long flags; + if (d40c->phy_chan == NULL) { + dev_err(&d40c->chan.dev->device, + "[%s] Channel is not allocated!\n", __func__); + return; + } + spin_lock_irqsave(&d40c->lock, flags); /* Busy means that pending jobs are already being processed */ @@ -2065,12 +2086,129 @@ static void d40_issue_pending(struct dma_chan *chan) spin_unlock_irqrestore(&d40c->lock, flags); } +/* Runtime reconfiguration extension */ +static void d40_set_runtime_config(struct dma_chan *chan, + struct dma_slave_config *config) +{ + struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); + struct stedma40_chan_cfg *cfg = &d40c->dma_cfg; + enum dma_slave_buswidth config_addr_width; + dma_addr_t config_addr; + u32 config_maxburst; + enum stedma40_periph_data_width addr_width; + int psize; + + if (config->direction == DMA_FROM_DEVICE) { + dma_addr_t dev_addr_rx = + d40c->base->plat_data->dev_rx[cfg->src_dev_type]; + + config_addr = config->src_addr; + if (dev_addr_rx) + dev_dbg(d40c->base->dev, + "channel has a pre-wired RX address %08x " + "overriding with %08x\n", + dev_addr_rx, config_addr); + if (cfg->dir != STEDMA40_PERIPH_TO_MEM) + dev_dbg(d40c->base->dev, + "channel was not configured for peripheral " + "to memory transfer (%d) overriding\n", + cfg->dir); + cfg->dir = STEDMA40_PERIPH_TO_MEM; + + config_addr_width = config->src_addr_width; + config_maxburst = config->src_maxburst; + + } else if (config->direction == DMA_TO_DEVICE) { + dma_addr_t dev_addr_tx = + d40c->base->plat_data->dev_tx[cfg->dst_dev_type]; + + config_addr = config->dst_addr; + if (dev_addr_tx) + dev_dbg(d40c->base->dev, + "channel has a pre-wired TX address %08x " + "overriding with %08x\n", + dev_addr_tx, config_addr); + if (cfg->dir != STEDMA40_MEM_TO_PERIPH) + dev_dbg(d40c->base->dev, + "channel was not configured for memory " + "to peripheral transfer (%d) overriding\n", + cfg->dir); + cfg->dir = STEDMA40_MEM_TO_PERIPH; + + config_addr_width = config->dst_addr_width; + config_maxburst = config->dst_maxburst; + + } else { + dev_err(d40c->base->dev, + "unrecognized channel direction %d\n", + config->direction); + return; + } + + switch (config_addr_width) { + case DMA_SLAVE_BUSWIDTH_1_BYTE: + addr_width = STEDMA40_BYTE_WIDTH; + break; + case DMA_SLAVE_BUSWIDTH_2_BYTES: + addr_width = STEDMA40_HALFWORD_WIDTH; + break; + case DMA_SLAVE_BUSWIDTH_4_BYTES: + addr_width = STEDMA40_WORD_WIDTH; + break; + case DMA_SLAVE_BUSWIDTH_8_BYTES: + addr_width = STEDMA40_DOUBLEWORD_WIDTH; + break; + default: + dev_err(d40c->base->dev, + "illegal peripheral address width " + "requested (%d)\n", + config->src_addr_width); + return; + } + + if (config_maxburst >= 16) + psize = STEDMA40_PSIZE_LOG_16; + else if (config_maxburst >= 8) + psize = STEDMA40_PSIZE_LOG_8; + else if (config_maxburst >= 4) + psize = STEDMA40_PSIZE_LOG_4; + else + psize = STEDMA40_PSIZE_LOG_1; + + /* Set up all the endpoint configs */ + cfg->src_info.data_width = addr_width; + cfg->src_info.psize = psize; + cfg->src_info.endianess = STEDMA40_LITTLE_ENDIAN; + cfg->src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL; + cfg->dst_info.data_width = addr_width; + cfg->dst_info.psize = psize; + cfg->dst_info.endianess = STEDMA40_LITTLE_ENDIAN; + cfg->dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL; + + /* These settings will take precedence later */ + d40c->runtime_addr = config_addr; + d40c->runtime_direction = config->direction; + dev_dbg(d40c->base->dev, + "configured channel %s for %s, data width %d, " + "maxburst %d bytes, LE, no flow control\n", + dma_chan_name(chan), + (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX", + config_addr_width, + config_maxburst); +} + static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg) { unsigned long flags; struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); + if (d40c->phy_chan == NULL) { + dev_err(&d40c->chan.dev->device, + "[%s] Channel is not allocated!\n", __func__); + return -EINVAL; + } + switch (cmd) { case DMA_TERMINATE_ALL: spin_lock_irqsave(&d40c->lock, flags); @@ -2081,6 +2219,12 @@ static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, return d40_pause(chan); case DMA_RESUME: return d40_resume(chan); + case DMA_SLAVE_CONFIG: + d40_set_runtime_config(chan, + (struct dma_slave_config *) arg); + return 0; + default: + break; } /* Other commands are unimplemented */ @@ -2111,13 +2255,10 @@ static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma, d40c->log_num = D40_PHY_CHAN; - INIT_LIST_HEAD(&d40c->free); INIT_LIST_HEAD(&d40c->active); INIT_LIST_HEAD(&d40c->queue); INIT_LIST_HEAD(&d40c->client); - d40c->free_len = 0; - tasklet_init(&d40c->tasklet, dma_tasklet, (unsigned long) d40c); @@ -2243,6 +2384,14 @@ static int __init d40_phy_res_init(struct d40_base *base) } spin_lock_init(&base->phy_res[i].lock); } + + /* Mark disabled channels as occupied */ + for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) { + base->phy_res[i].allocated_src = D40_ALLOC_PHY; + base->phy_res[i].allocated_dst = D40_ALLOC_PHY; + num_phy_chans_avail--; + } + dev_info(base->dev, "%d of %d physical DMA channels available\n", num_phy_chans_avail, base->num_phy_chans); @@ -2291,6 +2440,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) int num_log_chans = 0; int num_phy_chans; int i; + u32 val; clk = clk_get(&pdev->dev, NULL); @@ -2329,12 +2479,13 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) } } - i = readl(virtbase + D40_DREG_PERIPHID2); + /* Get silicon revision */ + val = readl(virtbase + D40_DREG_PERIPHID2); - if ((i & 0xf) != D40_PERIPHID2_DESIGNER) { + if ((val & 0xf) != D40_PERIPHID2_DESIGNER) { dev_err(&pdev->dev, "[%s] Unknown designer! Got %x wanted %x\n", - __func__, i & 0xf, D40_PERIPHID2_DESIGNER); + __func__, val & 0xf, D40_PERIPHID2_DESIGNER); goto failure; } @@ -2342,7 +2493,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4; dev_info(&pdev->dev, "hardware revision: %d @ 0x%x\n", - (i >> 4) & 0xf, res->start); + (val >> 4) & 0xf, res->start); plat_data = pdev->dev.platform_data; @@ -2364,6 +2515,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) goto failure; } + base->rev = (val >> 4) & 0xf; base->clk = clk; base->num_phy_chans = num_phy_chans; base->num_log_chans = num_log_chans; @@ -2402,6 +2554,12 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) if (!base->lcla_pool.alloc_map) goto failure; + base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc), + 0, SLAB_HWCACHE_ALIGN, + NULL); + if (base->desc_slab == NULL) + goto failure; + return base; failure: @@ -2495,6 +2653,78 @@ static void __init d40_hw_init(struct d40_base *base) } +static int __init d40_lcla_allocate(struct d40_base *base) +{ + unsigned long *page_list; + int i, j; + int ret = 0; + + /* + * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned, + * To full fill this hardware requirement without wasting 256 kb + * we allocate pages until we get an aligned one. + */ + page_list = kmalloc(sizeof(unsigned long) * MAX_LCLA_ALLOC_ATTEMPTS, + GFP_KERNEL); + + if (!page_list) { + ret = -ENOMEM; + goto failure; + } + + /* Calculating how many pages that are required */ + base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE; + + for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) { + page_list[i] = __get_free_pages(GFP_KERNEL, + base->lcla_pool.pages); + if (!page_list[i]) { + + dev_err(base->dev, + "[%s] Failed to allocate %d pages.\n", + __func__, base->lcla_pool.pages); + + for (j = 0; j < i; j++) + free_pages(page_list[j], base->lcla_pool.pages); + goto failure; + } + + if ((virt_to_phys((void *)page_list[i]) & + (LCLA_ALIGNMENT - 1)) == 0) + break; + } + + for (j = 0; j < i; j++) + free_pages(page_list[j], base->lcla_pool.pages); + + if (i < MAX_LCLA_ALLOC_ATTEMPTS) { + base->lcla_pool.base = (void *)page_list[i]; + } else { + /* After many attempts, no succees with finding the correct + * alignment try with allocating a big buffer */ + dev_warn(base->dev, + "[%s] Failed to get %d pages @ 18 bit align.\n", + __func__, base->lcla_pool.pages); + base->lcla_pool.base_unaligned = kmalloc(SZ_1K * + base->num_phy_chans + + LCLA_ALIGNMENT, + GFP_KERNEL); + if (!base->lcla_pool.base_unaligned) { + ret = -ENOMEM; + goto failure; + } + + base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned, + LCLA_ALIGNMENT); + } + + writel(virt_to_phys(base->lcla_pool.base), + base->virtbase + D40_DREG_LCLA); +failure: + kfree(page_list); + return ret; +} + static int __init d40_probe(struct platform_device *pdev) { int err; @@ -2554,41 +2784,11 @@ static int __init d40_probe(struct platform_device *pdev) __func__); goto failure; } - /* Get IO for logical channel link address */ - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lcla"); - if (!res) { - ret = -ENOENT; - dev_err(&pdev->dev, - "[%s] No \"lcla\" resource defined\n", - __func__); - goto failure; - } - base->lcla_pool.base_size = resource_size(res); - base->lcla_pool.phy = res->start; - - if (request_mem_region(res->start, resource_size(res), - D40_NAME " I/O lcla") == NULL) { - ret = -EBUSY; - dev_err(&pdev->dev, - "[%s] Failed to request LCLA region 0x%x-0x%x\n", - __func__, res->start, res->end); - goto failure; - } - val = readl(base->virtbase + D40_DREG_LCLA); - if (res->start != val && val != 0) { - dev_warn(&pdev->dev, - "[%s] Mismatch LCLA dma 0x%x, def 0x%x\n", - __func__, val, res->start); - } else - writel(res->start, base->virtbase + D40_DREG_LCLA); - - base->lcla_pool.base = ioremap(res->start, resource_size(res)); - if (!base->lcla_pool.base) { - ret = -ENOMEM; - dev_err(&pdev->dev, - "[%s] Failed to ioremap LCLA 0x%x-0x%x\n", - __func__, res->start, res->end); + ret = d40_lcla_allocate(base); + if (ret) { + dev_err(&pdev->dev, "[%s] Failed to allocate LCLA area\n", + __func__); goto failure; } @@ -2616,11 +2816,15 @@ static int __init d40_probe(struct platform_device *pdev) failure: if (base) { + if (base->desc_slab) + kmem_cache_destroy(base->desc_slab); if (base->virtbase) iounmap(base->virtbase); - if (base->lcla_pool.phy) - release_mem_region(base->lcla_pool.phy, - base->lcla_pool.base_size); + if (!base->lcla_pool.base_unaligned && base->lcla_pool.base) + free_pages((unsigned long)base->lcla_pool.base, + base->lcla_pool.pages); + if (base->lcla_pool.base_unaligned) + kfree(base->lcla_pool.base_unaligned); if (base->phy_lcpa) release_mem_region(base->phy_lcpa, base->lcpa_size); diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index 561fdd8..d937f76 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -315,11 +315,8 @@ int d40_log_sg_to_dev(struct d40_lcla_elem *lcla, int total_size = 0; struct scatterlist *current_sg = sg; int i; - u32 next_lli_off_dst; - u32 next_lli_off_src; - - next_lli_off_src = 0; - next_lli_off_dst = 0; + u32 next_lli_off_dst = 0; + u32 next_lli_off_src = 0; for_each_sg(sg, current_sg, sg_len, i) { total_size += sg_dma_len(current_sg); @@ -351,7 +348,7 @@ int d40_log_sg_to_dev(struct d40_lcla_elem *lcla, sg_dma_len(current_sg), next_lli_off_src, lcsp->lcsp1, src_data_width, - term_int && !next_lli_off_src, + false, true); d40_log_fill_lli(&lli->dst[i], dev_addr, @@ -375,7 +372,7 @@ int d40_log_sg_to_dev(struct d40_lcla_elem *lcla, sg_dma_len(current_sg), next_lli_off_src, lcsp->lcsp1, src_data_width, - term_int && !next_lli_off_src, + false, false); } } @@ -423,32 +420,35 @@ int d40_log_sg_to_lli(int lcla_id, return total_size; } -void d40_log_lli_write(struct d40_log_lli_full *lcpa, +int d40_log_lli_write(struct d40_log_lli_full *lcpa, struct d40_log_lli *lcla_src, struct d40_log_lli *lcla_dst, struct d40_log_lli *lli_dst, struct d40_log_lli *lli_src, int llis_per_log) { - u32 slos = 0; - u32 dlos = 0; + u32 slos; + u32 dlos; int i; - lcpa->lcsp0 = lli_src->lcsp02; - lcpa->lcsp1 = lli_src->lcsp13; - lcpa->lcsp2 = lli_dst->lcsp02; - lcpa->lcsp3 = lli_dst->lcsp13; + writel(lli_src->lcsp02, &lcpa->lcsp0); + writel(lli_src->lcsp13, &lcpa->lcsp1); + writel(lli_dst->lcsp02, &lcpa->lcsp2); + writel(lli_dst->lcsp13, &lcpa->lcsp3); slos = lli_src->lcsp13 & D40_MEM_LCSP1_SLOS_MASK; dlos = lli_dst->lcsp13 & D40_MEM_LCSP3_DLOS_MASK; for (i = 0; (i < llis_per_log) && slos && dlos; i++) { - writel(lli_src[i+1].lcsp02, &lcla_src[i].lcsp02); - writel(lli_src[i+1].lcsp13, &lcla_src[i].lcsp13); - writel(lli_dst[i+1].lcsp02, &lcla_dst[i].lcsp02); - writel(lli_dst[i+1].lcsp13, &lcla_dst[i].lcsp13); + writel(lli_src[i + 1].lcsp02, &lcla_src[i].lcsp02); + writel(lli_src[i + 1].lcsp13, &lcla_src[i].lcsp13); + writel(lli_dst[i + 1].lcsp02, &lcla_dst[i].lcsp02); + writel(lli_dst[i + 1].lcsp13, &lcla_dst[i].lcsp13); - slos = lli_src[i+1].lcsp13 & D40_MEM_LCSP1_SLOS_MASK; - dlos = lli_dst[i+1].lcsp13 & D40_MEM_LCSP3_DLOS_MASK; + slos = lli_src[i + 1].lcsp13 & D40_MEM_LCSP1_SLOS_MASK; + dlos = lli_dst[i + 1].lcsp13 & D40_MEM_LCSP3_DLOS_MASK; } + + return i; + } diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h index 2029280..9c0fa2f 100644 --- a/drivers/dma/ste_dma40_ll.h +++ b/drivers/dma/ste_dma40_ll.h @@ -13,6 +13,9 @@ #define D40_DREG_PCDELTA (8 * 4) #define D40_LLI_ALIGN 16 /* LLI alignment must be 16 bytes. */ +#define D40_LCPA_CHAN_SIZE 32 +#define D40_LCPA_CHAN_DST_DELTA 16 + #define D40_TYPE_TO_GROUP(type) (type / 16) #define D40_TYPE_TO_EVENT(type) (type % 16) @@ -336,12 +339,12 @@ int d40_log_sg_to_dev(struct d40_lcla_elem *lcla, bool term_int, dma_addr_t dev_addr, int max_len, int llis_per_log); -void d40_log_lli_write(struct d40_log_lli_full *lcpa, - struct d40_log_lli *lcla_src, - struct d40_log_lli *lcla_dst, - struct d40_log_lli *lli_dst, - struct d40_log_lli *lli_src, - int llis_per_log); +int d40_log_lli_write(struct d40_log_lli_full *lcpa, + struct d40_log_lli *lcla_src, + struct d40_log_lli *lcla_dst, + struct d40_log_lli *lli_dst, + struct d40_log_lli *lli_src, + int llis_per_log); int d40_log_sg_to_lli(int lcla_id, struct scatterlist *sg, diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c index a1bf77c..2ec1ed56 100644 --- a/drivers/dma/timb_dma.c +++ b/drivers/dma/timb_dma.c @@ -200,8 +200,8 @@ static int td_fill_desc(struct timb_dma_chan *td_chan, u8 *dma_desc, return -EINVAL; } - dev_dbg(chan2dev(&td_chan->chan), "desc: %p, addr: %p\n", - dma_desc, (void *)sg_dma_address(sg)); + dev_dbg(chan2dev(&td_chan->chan), "desc: %p, addr: 0x%llx\n", + dma_desc, (unsigned long long)sg_dma_address(sg)); dma_desc[7] = (sg_dma_address(sg) >> 24) & 0xff; dma_desc[6] = (sg_dma_address(sg) >> 16) & 0xff; @@ -382,7 +382,7 @@ static struct timb_dma_desc *td_alloc_init_desc(struct timb_dma_chan *td_chan) td_desc = kzalloc(sizeof(struct timb_dma_desc), GFP_KERNEL); if (!td_desc) { dev_err(chan2dev(chan), "Failed to alloc descriptor\n"); - goto err; + goto out; } td_desc->desc_list_len = td_chan->desc_elems * TIMB_DMA_DESC_SIZE; @@ -410,7 +410,7 @@ static struct timb_dma_desc *td_alloc_init_desc(struct timb_dma_chan *td_chan) err: kfree(td_desc->desc_list); kfree(td_desc); - +out: return NULL; } diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index 110e24e..f287fe7 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -744,7 +744,7 @@ static inline int edd_num_devices(void) static int __init edd_init(void) { - unsigned int i; + int i; int rc=0; struct edd_device *edev; @@ -760,21 +760,27 @@ edd_init(void) if (!edd_kset) return -ENOMEM; - for (i = 0; i < edd_num_devices() && !rc; i++) { + for (i = 0; i < edd_num_devices(); i++) { edev = kzalloc(sizeof (*edev), GFP_KERNEL); - if (!edev) - return -ENOMEM; + if (!edev) { + rc = -ENOMEM; + goto out; + } rc = edd_device_register(edev, i); if (rc) { kfree(edev); - break; + goto out; } edd_devices[i] = edev; } - if (rc) - kset_unregister(edd_kset); + return 0; + +out: + while (--i >= 0) + edd_device_unregister(edd_devices[i]); + kset_unregister(edd_kset); return rc; } diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 4598130..b9e4dbf 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -839,7 +839,6 @@ static void output_poll_execute(struct work_struct *work) struct drm_connector *connector; enum drm_connector_status old_status, status; bool repoll = false, changed = false; - int ret; mutex_lock(&dev->mode_config.mutex); list_for_each_entry(connector, &dev->mode_config.connector_list, head) { @@ -874,11 +873,8 @@ static void output_poll_execute(struct work_struct *work) dev->mode_config.funcs->output_poll_changed(dev); } - if (repoll) { - ret = queue_delayed_work(system_nrt_wq, delayed_work, DRM_OUTPUT_POLL_PERIOD); - if (ret) - DRM_ERROR("delayed enqueue failed %d\n", ret); - } + if (repoll) + queue_delayed_work(system_nrt_wq, delayed_work, DRM_OUTPUT_POLL_PERIOD); } void drm_kms_helper_poll_disable(struct drm_device *dev) @@ -893,18 +889,14 @@ void drm_kms_helper_poll_enable(struct drm_device *dev) { bool poll = false; struct drm_connector *connector; - int ret; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (connector->polled) poll = true; } - if (poll) { - ret = queue_delayed_work(system_nrt_wq, &dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD); - if (ret) - DRM_ERROR("delayed enqueue failed %d\n", ret); - } + if (poll) + queue_delayed_work(system_nrt_wq, &dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD); } EXPORT_SYMBOL(drm_kms_helper_poll_enable); diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 54acd8b..a79525f 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -130,7 +130,7 @@ static int intelfb_create(struct intel_fbdev *ifbdev, strcpy(info->fix.id, "inteldrmfb"); - info->flags = FBINFO_DEFAULT; + info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT; info->fbops = &intelfb_ops; /* setup aperture base/size for vesafb takeover */ @@ -148,8 +148,6 @@ static int intelfb_create(struct intel_fbdev *ifbdev, info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset; info->fix.smem_len = size; - info->flags = FBINFO_DEFAULT; - info->screen_base = ioremap_wc(dev->agp->base + obj_priv->gtt_offset, size); if (!info->screen_base) { diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 2fb2444..099f637 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -250,6 +250,7 @@ nouveau_fbcon_create(struct nouveau_fbdev *nfbdev, info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_IMAGEBLIT; + info->flags |= FBINFO_CAN_FORCE_OUTPUT; info->fbops = &nouveau_fbcon_ops; info->fix.smem_start = dev->mode_config.fb_base + nvbo->bo.offset - dev_priv->vm_vram_base; diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index dc1634b..dbf8696 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -224,7 +224,7 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev, drm_fb_helper_fill_fix(info, fb->pitch, fb->depth); - info->flags = FBINFO_DEFAULT; + info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT; info->fbops = &radeonfb_ops; tmp = radeon_bo_gpu_offset(rbo) - rdev->mc.vram_start; diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 807dcd1..724f46e 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -230,7 +230,7 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, input_report_key(input, BTN_RIGHT, 0); input_report_key(input, BTN_MIDDLE, 0); input_report_abs(input, ABS_DISTANCE, - input->absmax[ABS_DISTANCE]); + input_abs_get_max(input, ABS_DISTANCE)); } else { input_report_key(input, BTN_TOUCH, 0); input_report_key(input, BTN_STYLUS, 0); @@ -383,38 +383,37 @@ move_on: /* Basics */ input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL); - input->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | - BIT(ABS_PRESSURE) | BIT(ABS_DISTANCE); - input->relbit[0] |= BIT(REL_WHEEL); - set_bit(BTN_TOOL_PEN, input->keybit); - set_bit(BTN_TOUCH, input->keybit); - set_bit(BTN_STYLUS, input->keybit); - set_bit(BTN_STYLUS2, input->keybit); - set_bit(BTN_LEFT, input->keybit); - set_bit(BTN_RIGHT, input->keybit); - set_bit(BTN_MIDDLE, input->keybit); + + __set_bit(REL_WHEEL, input->relbit); + + __set_bit(BTN_TOOL_PEN, input->keybit); + __set_bit(BTN_TOUCH, input->keybit); + __set_bit(BTN_STYLUS, input->keybit); + __set_bit(BTN_STYLUS2, input->keybit); + __set_bit(BTN_LEFT, input->keybit); + __set_bit(BTN_RIGHT, input->keybit); + __set_bit(BTN_MIDDLE, input->keybit); /* Pad */ input->evbit[0] |= BIT(EV_MSC); - input->mscbit[0] |= BIT(MSC_SERIAL); - set_bit(BTN_0, input->keybit); - set_bit(BTN_1, input->keybit); - set_bit(BTN_TOOL_FINGER, input->keybit); - /* Distance, rubber and mouse */ - input->absbit[0] |= BIT(ABS_DISTANCE); - set_bit(BTN_TOOL_RUBBER, input->keybit); - set_bit(BTN_TOOL_MOUSE, input->keybit); + __set_bit(MSC_SERIAL, input->mscbit); - input->absmax[ABS_PRESSURE] = 511; - input->absmax[ABS_DISTANCE] = 32; + __set_bit(BTN_0, input->keybit); + __set_bit(BTN_1, input->keybit); + __set_bit(BTN_TOOL_FINGER, input->keybit); - input->absmax[ABS_X] = 16704; - input->absmax[ABS_Y] = 12064; - input->absfuzz[ABS_X] = 4; - input->absfuzz[ABS_Y] = 4; + /* Distance, rubber and mouse */ + __set_bit(BTN_TOOL_RUBBER, input->keybit); + __set_bit(BTN_TOOL_MOUSE, input->keybit); + + input_set_abs_params(input, ABS_X, 0, 16704, 4, 0); + input_set_abs_params(input, ABS_Y, 0, 12064, 4, 0); + input_set_abs_params(input, ABS_PRESSURE, 0, 511, 0, 0); + input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0); return 0; + err_free: kfree(wdata); return ret; diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 4d382ae..f3adf18 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -332,11 +332,11 @@ config SENSORS_F71805F will be called f71805f. config SENSORS_F71882FG - tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000" + tristate "Fintek F71808E, F71858FG, F71862FG, F71882FG, F71889FG and F8000" depends on EXPERIMENTAL help - If you say yes here you get support for hardware monitoring - features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG, + If you say yes here you get support for hardware monitoring features + of the Fintek F71808E, F71858FG, F71862FG/71863FG, F71882FG/F71883FG, F71889FG and F8000 Super-I/O chips. This driver can also be built as a module. If so, the module @@ -405,7 +405,7 @@ config SENSORS_CORETEMP help If you say yes here you get support for the temperature sensor inside your CPU. Most of the family 6 CPUs - are supported. Check documentation/driver for details. + are supported. Check Documentation/hwmon/coretemp for details. config SENSORS_PKGTEMP tristate "Intel processor package temperature sensor" @@ -463,6 +463,17 @@ config SENSORS_JZ4740 This driver can also be build as a module. If so, the module will be called jz4740-hwmon. +config SENSORS_JC42 + tristate "JEDEC JC42.4 compliant temperature sensors" + help + If you say yes here you get support for Jedec JC42.4 compliant + temperature sensors. Support will include, but not be limited to, + ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, + MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3. + + This driver can also be built as a module. If so, the module + will be called jc42. + config SENSORS_LM63 tristate "National Semiconductor LM63 and LM64" depends on I2C @@ -756,6 +767,21 @@ config SENSORS_SIS5595 This driver can also be built as a module. If so, the module will be called sis5595. +config SENSORS_SMM665 + tristate "Summit Microelectronics SMM665" + depends on I2C && EXPERIMENTAL + default n + help + If you say yes here you get support for the hardware monitoring + features of the Summit Microelectronics SMM665/SMM665B Six-Channel + Active DC Output Controller / Monitor. + + Other supported chips are SMM465, SMM665C, SMM764, and SMM766. + Support for those chips is untested. + + This driver can also be built as a module. If so, the module will + be called smm665. + config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 9103bd6..13d913e 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o +obj-$(CONFIG_SENSORS_JC42) += jc42.o obj-$(CONFIG_SENSORS_JZ4740) += jz4740-hwmon.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o @@ -88,6 +89,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o +obj-$(CONFIG_SENSORS_SMM665) += smm665.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 05344af..a92e28a 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -480,7 +480,6 @@ exit: return err; } -#ifdef CONFIG_HOTPLUG_CPU static void coretemp_device_remove(unsigned int cpu) { struct pdev_entry *p, *n; @@ -502,10 +501,13 @@ static int __cpuinit coretemp_cpu_callback(struct notifier_block *nfb, switch (action) { case CPU_ONLINE: + case CPU_ONLINE_FROZEN: case CPU_DOWN_FAILED: + case CPU_DOWN_FAILED_FROZEN: coretemp_device_add(cpu); break; case CPU_DOWN_PREPARE: + case CPU_DOWN_PREPARE_FROZEN: coretemp_device_remove(cpu); break; } @@ -515,7 +517,6 @@ static int __cpuinit coretemp_cpu_callback(struct notifier_block *nfb, static struct notifier_block coretemp_cpu_notifier __refdata = { .notifier_call = coretemp_cpu_callback, }; -#endif /* !CONFIG_HOTPLUG_CPU */ static int __init coretemp_init(void) { @@ -537,12 +538,9 @@ static int __init coretemp_init(void) * sensors. We check this bit only, all the early CPUs * without thermal sensors will be filtered out. */ - if (c->cpuid_level >= 6 && (cpuid_eax(0x06) & 0x01)) { - err = coretemp_device_add(i); - if (err) - goto exit_devices_unreg; - - } else { + if (c->cpuid_level >= 6 && (cpuid_eax(0x06) & 0x01)) + coretemp_device_add(i); + else { printk(KERN_INFO DRVNAME ": CPU (model=0x%x)" " has no thermal sensor.\n", c->x86_model); } @@ -552,21 +550,13 @@ static int __init coretemp_init(void) goto exit_driver_unreg; } -#ifdef CONFIG_HOTPLUG_CPU register_hotcpu_notifier(&coretemp_cpu_notifier); -#endif return 0; -exit_devices_unreg: - mutex_lock(&pdev_list_mutex); - list_for_each_entry_safe(p, n, &pdev_list, list) { - platform_device_unregister(p->pdev); - list_del(&p->list); - kfree(p); - } - mutex_unlock(&pdev_list_mutex); exit_driver_unreg: +#ifndef CONFIG_HOTPLUG_CPU platform_driver_unregister(&coretemp_driver); +#endif exit: return err; } diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 537841e..6207120 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -45,6 +45,7 @@ #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ #define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */ +#define SIO_F71808_ID 0x0901 /* Chipset ID */ #define SIO_F71858_ID 0x0507 /* Chipset ID */ #define SIO_F71862_ID 0x0601 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ @@ -96,9 +97,10 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -enum chips { f71858fg, f71862fg, f71882fg, f71889fg, f8000 }; +enum chips { f71808fg, f71858fg, f71862fg, f71882fg, f71889fg, f8000 }; static const char *f71882fg_names[] = { + "f71808fg", "f71858fg", "f71862fg", "f71882fg", @@ -306,8 +308,8 @@ static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = { SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2), }; -/* Temp and in attr common to the f71862fg, f71882fg and f71889fg */ -static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = { +/* In attr common to the f71862fg, f71882fg and f71889fg */ +static struct sensor_device_attribute_2 fxxxx_in_attr[] = { SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0), SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1), SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2), @@ -317,6 +319,22 @@ static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = { SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6), SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7), SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8), +}; + +/* In attr for the f71808fg */ +static struct sensor_device_attribute_2 f71808_in_attr[] = { + SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0), + SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1), + SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2), + SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3), + SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4), + SENSOR_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 0, 5), + SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 7), + SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 8), +}; + +/* Temp attr common to the f71808fg, f71862fg, f71882fg and f71889fg */ +static struct sensor_device_attribute_2 fxxxx_temp_attr[] = { SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 1), SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max, store_temp_max, 0, 1), @@ -355,6 +373,10 @@ static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = { store_temp_beep, 0, 6), SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 2), SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 2), +}; + +/* Temp and in attr common to the f71862fg, f71882fg and f71889fg */ +static struct sensor_device_attribute_2 f71862_temp_attr[] = { SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 3), SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max, store_temp_max, 0, 3), @@ -989,6 +1011,11 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) data->temp_type[1] = 6; break; } + } else if (data->type == f71808fg) { + reg = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE); + data->temp_type[1] = (reg & 0x02) ? 2 : 4; + data->temp_type[2] = (reg & 0x04) ? 2 : 4; + } else { reg2 = f71882fg_read8(data, F71882FG_REG_PECI); if ((reg2 & 0x03) == 0x01) @@ -1871,7 +1898,8 @@ static ssize_t store_pwm_auto_point_temp(struct device *dev, val /= 1000; - if (data->type == f71889fg) + if (data->type == f71889fg + || data->type == f71808fg) val = SENSORS_LIMIT(val, -128, 127); else val = SENSORS_LIMIT(val, 0, 127); @@ -1974,8 +2002,28 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) /* fall through! */ case f71862fg: err = f71882fg_create_sysfs_files(pdev, - fxxxx_in_temp_attr, - ARRAY_SIZE(fxxxx_in_temp_attr)); + f71862_temp_attr, + ARRAY_SIZE(f71862_temp_attr)); + if (err) + goto exit_unregister_sysfs; + err = f71882fg_create_sysfs_files(pdev, + fxxxx_in_attr, + ARRAY_SIZE(fxxxx_in_attr)); + if (err) + goto exit_unregister_sysfs; + err = f71882fg_create_sysfs_files(pdev, + fxxxx_temp_attr, + ARRAY_SIZE(fxxxx_temp_attr)); + break; + case f71808fg: + err = f71882fg_create_sysfs_files(pdev, + f71808_in_attr, + ARRAY_SIZE(f71808_in_attr)); + if (err) + goto exit_unregister_sysfs; + err = f71882fg_create_sysfs_files(pdev, + fxxxx_temp_attr, + ARRAY_SIZE(fxxxx_temp_attr)); break; case f8000: err = f71882fg_create_sysfs_files(pdev, @@ -2002,6 +2050,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) case f71862fg: err = (data->pwm_enable & 0x15) != 0x15; break; + case f71808fg: case f71882fg: case f71889fg: err = 0; @@ -2047,6 +2096,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) f8000_auto_pwm_attr, ARRAY_SIZE(f8000_auto_pwm_attr)); break; + case f71808fg: case f71889fg: for (i = 0; i < nr_fans; i++) { data->pwm_auto_point_mapping[i] = @@ -2126,8 +2176,22 @@ static int f71882fg_remove(struct platform_device *pdev) /* fall through! */ case f71862fg: f71882fg_remove_sysfs_files(pdev, - fxxxx_in_temp_attr, - ARRAY_SIZE(fxxxx_in_temp_attr)); + f71862_temp_attr, + ARRAY_SIZE(f71862_temp_attr)); + f71882fg_remove_sysfs_files(pdev, + fxxxx_in_attr, + ARRAY_SIZE(fxxxx_in_attr)); + f71882fg_remove_sysfs_files(pdev, + fxxxx_temp_attr, + ARRAY_SIZE(fxxxx_temp_attr)); + break; + case f71808fg: + f71882fg_remove_sysfs_files(pdev, + f71808_in_attr, + ARRAY_SIZE(f71808_in_attr)); + f71882fg_remove_sysfs_files(pdev, + fxxxx_temp_attr, + ARRAY_SIZE(fxxxx_temp_attr)); break; case f8000: f71882fg_remove_sysfs_files(pdev, @@ -2195,6 +2259,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address, devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); switch (devid) { + case SIO_F71808_ID: + sio_data->type = f71808fg; + break; case SIO_F71858_ID: sio_data->type = f71858fg; break; diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index be2d131..bfd42f1 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -522,6 +522,7 @@ static struct dmi_system_id __initdata hdaps_whitelist[] = { HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p", HDAPS_BOTH_AXES), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T400", HDAPS_BOTH_AXES), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60", HDAPS_BOTH_AXES), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61p", HDAPS_BOTH_AXES), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61", HDAPS_BOTH_AXES), diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c new file mode 100644 index 0000000..340fc78 --- /dev/null +++ b/drivers/hwmon/jc42.c @@ -0,0 +1,593 @@ +/* + * jc42.c - driver for Jedec JC42.4 compliant temperature sensors + * + * Copyright (c) 2010 Ericsson AB. + * + * Derived from lm77.c by Andras BALI <drewie@freemail.hu>. + * + * JC42.4 compliant temperature sensors are typically used on memory modules. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, I2C_CLIENT_END }; + +/* JC42 registers. All registers are 16 bit. */ +#define JC42_REG_CAP 0x00 +#define JC42_REG_CONFIG 0x01 +#define JC42_REG_TEMP_UPPER 0x02 +#define JC42_REG_TEMP_LOWER 0x03 +#define JC42_REG_TEMP_CRITICAL 0x04 +#define JC42_REG_TEMP 0x05 +#define JC42_REG_MANID 0x06 +#define JC42_REG_DEVICEID 0x07 + +/* Status bits in temperature register */ +#define JC42_ALARM_CRIT_BIT 15 +#define JC42_ALARM_MAX_BIT 14 +#define JC42_ALARM_MIN_BIT 13 + +/* Configuration register defines */ +#define JC42_CFG_CRIT_ONLY (1 << 2) +#define JC42_CFG_SHUTDOWN (1 << 8) +#define JC42_CFG_HYST_SHIFT 9 +#define JC42_CFG_HYST_MASK 0x03 + +/* Capabilities */ +#define JC42_CAP_RANGE (1 << 2) + +/* Manufacturer IDs */ +#define ADT_MANID 0x11d4 /* Analog Devices */ +#define MAX_MANID 0x004d /* Maxim */ +#define IDT_MANID 0x00b3 /* IDT */ +#define MCP_MANID 0x0054 /* Microchip */ +#define NXP_MANID 0x1131 /* NXP Semiconductors */ +#define ONS_MANID 0x1b09 /* ON Semiconductor */ +#define STM_MANID 0x104a /* ST Microelectronics */ + +/* Supported chips */ + +/* Analog Devices */ +#define ADT7408_DEVID 0x0801 +#define ADT7408_DEVID_MASK 0xffff + +/* IDT */ +#define TS3000B3_DEVID 0x2903 /* Also matches TSE2002B3 */ +#define TS3000B3_DEVID_MASK 0xffff + +/* Maxim */ +#define MAX6604_DEVID 0x3e00 +#define MAX6604_DEVID_MASK 0xffff + +/* Microchip */ +#define MCP98242_DEVID 0x2000 +#define MCP98242_DEVID_MASK 0xfffc + +#define MCP98243_DEVID 0x2100 +#define MCP98243_DEVID_MASK 0xfffc + +#define MCP9843_DEVID 0x0000 /* Also matches mcp9805 */ +#define MCP9843_DEVID_MASK 0xfffe + +/* NXP */ +#define SE97_DEVID 0xa200 +#define SE97_DEVID_MASK 0xfffc + +#define SE98_DEVID 0xa100 +#define SE98_DEVID_MASK 0xfffc + +/* ON Semiconductor */ +#define CAT6095_DEVID 0x0800 /* Also matches CAT34TS02 */ +#define CAT6095_DEVID_MASK 0xffe0 + +/* ST Microelectronics */ +#define STTS424_DEVID 0x0101 +#define STTS424_DEVID_MASK 0xffff + +#define STTS424E_DEVID 0x0000 +#define STTS424E_DEVID_MASK 0xfffe + +static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 }; + +struct jc42_chips { + u16 manid; + u16 devid; + u16 devid_mask; +}; + +static struct jc42_chips jc42_chips[] = { + { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK }, + { IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK }, + { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK }, + { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK }, + { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK }, + { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK }, + { NXP_MANID, SE97_DEVID, SE97_DEVID_MASK }, + { ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK }, + { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK }, + { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK }, + { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK }, +}; + +/* Each client has this additional data */ +struct jc42_data { + struct device *hwmon_dev; + struct mutex update_lock; /* protect register access */ + bool extended; /* true if extended range supported */ + bool valid; + unsigned long last_updated; /* In jiffies */ + u16 orig_config; /* original configuration */ + u16 config; /* current configuration */ + u16 temp_input; /* Temperatures */ + u16 temp_crit; + u16 temp_min; + u16 temp_max; +}; + +static int jc42_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info); +static int jc42_remove(struct i2c_client *client); +static int jc42_read_value(struct i2c_client *client, u8 reg); +static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value); + +static struct jc42_data *jc42_update_device(struct device *dev); + +static const struct i2c_device_id jc42_id[] = { + { "adt7408", 0 }, + { "cat94ts02", 0 }, + { "cat6095", 0 }, + { "jc42", 0 }, + { "max6604", 0 }, + { "mcp9805", 0 }, + { "mcp98242", 0 }, + { "mcp98243", 0 }, + { "mcp9843", 0 }, + { "se97", 0 }, + { "se97b", 0 }, + { "se98", 0 }, + { "stts424", 0 }, + { "tse2002b3", 0 }, + { "ts3000b3", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, jc42_id); + +#ifdef CONFIG_PM + +static int jc42_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct jc42_data *data = i2c_get_clientdata(client); + + data->config |= JC42_CFG_SHUTDOWN; + jc42_write_value(client, JC42_REG_CONFIG, data->config); + return 0; +} + +static int jc42_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct jc42_data *data = i2c_get_clientdata(client); + + data->config &= ~JC42_CFG_SHUTDOWN; + jc42_write_value(client, JC42_REG_CONFIG, data->config); + return 0; +} + +static const struct dev_pm_ops jc42_dev_pm_ops = { + .suspend = jc42_suspend, + .resume = jc42_resume, +}; + +#define JC42_DEV_PM_OPS (&jc42_dev_pm_ops) +#else +#define JC42_DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + +/* This is the driver that will be inserted */ +static struct i2c_driver jc42_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "jc42", + .pm = JC42_DEV_PM_OPS, + }, + .probe = jc42_probe, + .remove = jc42_remove, + .id_table = jc42_id, + .detect = jc42_detect, + .address_list = normal_i2c, +}; + +#define JC42_TEMP_MIN_EXTENDED (-40000) +#define JC42_TEMP_MIN 0 +#define JC42_TEMP_MAX 125000 + +static u16 jc42_temp_to_reg(int temp, bool extended) +{ + int ntemp = SENSORS_LIMIT(temp, + extended ? JC42_TEMP_MIN_EXTENDED : + JC42_TEMP_MIN, JC42_TEMP_MAX); + + /* convert from 0.001 to 0.0625 resolution */ + return (ntemp * 2 / 125) & 0x1fff; +} + +static int jc42_temp_from_reg(s16 reg) +{ + reg &= 0x1fff; + + /* sign extend register */ + if (reg & 0x1000) + reg |= 0xf000; + + /* convert from 0.0625 to 0.001 resolution */ + return reg * 125 / 2; +} + +/* sysfs stuff */ + +/* read routines for temperature limits */ +#define show(value) \ +static ssize_t show_##value(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct jc42_data *data = jc42_update_device(dev); \ + if (IS_ERR(data)) \ + return PTR_ERR(data); \ + return sprintf(buf, "%d\n", jc42_temp_from_reg(data->value)); \ +} + +show(temp_input); +show(temp_crit); +show(temp_min); +show(temp_max); + +/* read routines for hysteresis values */ +static ssize_t show_temp_crit_hyst(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct jc42_data *data = jc42_update_device(dev); + int temp, hyst; + + if (IS_ERR(data)) + return PTR_ERR(data); + + temp = jc42_temp_from_reg(data->temp_crit); + hyst = jc42_hysteresis[(data->config >> JC42_CFG_HYST_SHIFT) + & JC42_CFG_HYST_MASK]; + return sprintf(buf, "%d\n", temp - hyst); +} + +static ssize_t show_temp_max_hyst(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct jc42_data *data = jc42_update_device(dev); + int temp, hyst; + + if (IS_ERR(data)) + return PTR_ERR(data); + + temp = jc42_temp_from_reg(data->temp_max); + hyst = jc42_hysteresis[(data->config >> JC42_CFG_HYST_SHIFT) + & JC42_CFG_HYST_MASK]; + return sprintf(buf, "%d\n", temp - hyst); +} + +/* write routines */ +#define set(value, reg) \ +static ssize_t set_##value(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct jc42_data *data = i2c_get_clientdata(client); \ + int err, ret = count; \ + long val; \ + if (strict_strtol(buf, 10, &val) < 0) \ + return -EINVAL; \ + mutex_lock(&data->update_lock); \ + data->value = jc42_temp_to_reg(val, data->extended); \ + err = jc42_write_value(client, reg, data->value); \ + if (err < 0) \ + ret = err; \ + mutex_unlock(&data->update_lock); \ + return ret; \ +} + +set(temp_min, JC42_REG_TEMP_LOWER); +set(temp_max, JC42_REG_TEMP_UPPER); +set(temp_crit, JC42_REG_TEMP_CRITICAL); + +/* JC42.4 compliant chips only support four hysteresis values. + * Pick best choice and go from there. */ +static ssize_t set_temp_crit_hyst(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct jc42_data *data = i2c_get_clientdata(client); + long val; + int diff, hyst; + int err; + int ret = count; + + if (strict_strtoul(buf, 10, &val) < 0) + return -EINVAL; + + diff = jc42_temp_from_reg(data->temp_crit) - val; + hyst = 0; + if (diff > 0) { + if (diff < 2250) + hyst = 1; /* 1.5 degrees C */ + else if (diff < 4500) + hyst = 2; /* 3.0 degrees C */ + else + hyst = 3; /* 6.0 degrees C */ + } + + mutex_lock(&data->update_lock); + data->config = (data->config + & ~(JC42_CFG_HYST_MASK << JC42_CFG_HYST_SHIFT)) + | (hyst << JC42_CFG_HYST_SHIFT); + err = jc42_write_value(client, JC42_REG_CONFIG, data->config); + if (err < 0) + ret = err; + mutex_unlock(&data->update_lock); + return ret; +} + +static ssize_t show_alarm(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u16 bit = to_sensor_dev_attr(attr)->index; + struct jc42_data *data = jc42_update_device(dev); + u16 val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = data->temp_input; + if (bit != JC42_ALARM_CRIT_BIT && (data->config & JC42_CFG_CRIT_ONLY)) + val = 0; + return sprintf(buf, "%u\n", (val >> bit) & 1); +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, + show_temp_input, NULL); +static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, + show_temp_crit, set_temp_crit); +static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, + show_temp_min, set_temp_min); +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_temp_max, set_temp_max); + +static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, + show_temp_crit_hyst, set_temp_crit_hyst); +static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, + show_temp_max_hyst, NULL); + +static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, + JC42_ALARM_CRIT_BIT); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, + JC42_ALARM_MIN_BIT); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, + JC42_ALARM_MAX_BIT); + +static struct attribute *jc42_attributes[] = { + &dev_attr_temp1_input.attr, + &dev_attr_temp1_crit.attr, + &dev_attr_temp1_min.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_crit_hyst.attr, + &dev_attr_temp1_max_hyst.attr, + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group jc42_group = { + .attrs = jc42_attributes, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int jc42_detect(struct i2c_client *new_client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = new_client->adapter; + int i, config, cap, manid, devid; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + cap = jc42_read_value(new_client, JC42_REG_CAP); + config = jc42_read_value(new_client, JC42_REG_CONFIG); + manid = jc42_read_value(new_client, JC42_REG_MANID); + devid = jc42_read_value(new_client, JC42_REG_DEVICEID); + + if (cap < 0 || config < 0 || manid < 0 || devid < 0) + return -ENODEV; + + if ((cap & 0xff00) || (config & 0xf800)) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) { + struct jc42_chips *chip = &jc42_chips[i]; + if (manid == chip->manid && + (devid & chip->devid_mask) == chip->devid) { + strlcpy(info->type, "jc42", I2C_NAME_SIZE); + return 0; + } + } + return -ENODEV; +} + +static int jc42_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct jc42_data *data; + int config, cap, err; + + data = kzalloc(sizeof(struct jc42_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); + mutex_init(&data->update_lock); + + cap = jc42_read_value(new_client, JC42_REG_CAP); + if (cap < 0) { + err = -EINVAL; + goto exit_free; + } + data->extended = !!(cap & JC42_CAP_RANGE); + + config = jc42_read_value(new_client, JC42_REG_CONFIG); + if (config < 0) { + err = -EINVAL; + goto exit_free; + } + data->orig_config = config; + if (config & JC42_CFG_SHUTDOWN) { + config &= ~JC42_CFG_SHUTDOWN; + jc42_write_value(new_client, JC42_REG_CONFIG, config); + } + data->config = config; + + /* Register sysfs hooks */ + err = sysfs_create_group(&new_client->dev.kobj, &jc42_group); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&new_client->dev.kobj, &jc42_group); +exit_free: + kfree(data); +exit: + return err; +} + +static int jc42_remove(struct i2c_client *client) +{ + struct jc42_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &jc42_group); + if (data->config != data->orig_config) + jc42_write_value(client, JC42_REG_CONFIG, data->orig_config); + kfree(data); + return 0; +} + +/* All registers are word-sized. */ +static int jc42_read_value(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_word_data(client, reg); + if (ret < 0) + return ret; + return swab16(ret); +} + +static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + return i2c_smbus_write_word_data(client, reg, swab16(value)); +} + +static struct jc42_data *jc42_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct jc42_data *data = i2c_get_clientdata(client); + struct jc42_data *ret = data; + int val; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + val = jc42_read_value(client, JC42_REG_TEMP); + if (val < 0) { + ret = ERR_PTR(val); + goto abort; + } + data->temp_input = val; + + val = jc42_read_value(client, JC42_REG_TEMP_CRITICAL); + if (val < 0) { + ret = ERR_PTR(val); + goto abort; + } + data->temp_crit = val; + + val = jc42_read_value(client, JC42_REG_TEMP_LOWER); + if (val < 0) { + ret = ERR_PTR(val); + goto abort; + } + data->temp_min = val; + + val = jc42_read_value(client, JC42_REG_TEMP_UPPER); + if (val < 0) { + ret = ERR_PTR(val); + goto abort; + } + data->temp_max = val; + + data->last_updated = jiffies; + data->valid = true; + } +abort: + mutex_unlock(&data->update_lock); + return ret; +} + +static int __init sensors_jc42_init(void) +{ + return i2c_add_driver(&jc42_driver); +} + +static void __exit sensors_jc42_exit(void) +{ + i2c_del_driver(&jc42_driver); +} + +MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>"); +MODULE_DESCRIPTION("JC42 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_jc42_init); +module_exit(sensors_jc42_exit); diff --git a/drivers/hwmon/smm665.c b/drivers/hwmon/smm665.c new file mode 100644 index 0000000..425df5bc --- /dev/null +++ b/drivers/hwmon/smm665.c @@ -0,0 +1,743 @@ +/* + * Driver for SMM665 Power Controller / Monitor + * + * Copyright (C) 2010 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This driver should also work for SMM465, SMM764, and SMM766, but is untested + * for those chips. Only monitoring functionality is implemented. + * + * Datasheets: + * http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf + * http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/delay.h> + +/* Internal reference voltage (VREF, x 1000 */ +#define SMM665_VREF_ADC_X1000 1250 + +/* module parameters */ +static int vref = SMM665_VREF_ADC_X1000; +module_param(vref, int, 0); +MODULE_PARM_DESC(vref, "Reference voltage in mV"); + +enum chips { smm465, smm665, smm665c, smm764, smm766 }; + +/* + * ADC channel addresses + */ +#define SMM665_MISC16_ADC_DATA_A 0x00 +#define SMM665_MISC16_ADC_DATA_B 0x01 +#define SMM665_MISC16_ADC_DATA_C 0x02 +#define SMM665_MISC16_ADC_DATA_D 0x03 +#define SMM665_MISC16_ADC_DATA_E 0x04 +#define SMM665_MISC16_ADC_DATA_F 0x05 +#define SMM665_MISC16_ADC_DATA_VDD 0x06 +#define SMM665_MISC16_ADC_DATA_12V 0x07 +#define SMM665_MISC16_ADC_DATA_INT_TEMP 0x08 +#define SMM665_MISC16_ADC_DATA_AIN1 0x09 +#define SMM665_MISC16_ADC_DATA_AIN2 0x0a + +/* + * Command registers + */ +#define SMM665_MISC8_CMD_STS 0x80 +#define SMM665_MISC8_STATUS1 0x81 +#define SMM665_MISC8_STATUSS2 0x82 +#define SMM665_MISC8_IO_POLARITY 0x83 +#define SMM665_MISC8_PUP_POLARITY 0x84 +#define SMM665_MISC8_ADOC_STATUS1 0x85 +#define SMM665_MISC8_ADOC_STATUS2 0x86 +#define SMM665_MISC8_WRITE_PROT 0x87 +#define SMM665_MISC8_STS_TRACK 0x88 + +/* + * Configuration registers and register groups + */ +#define SMM665_ADOC_ENABLE 0x0d +#define SMM665_LIMIT_BASE 0x80 /* First limit register */ + +/* + * Limit register bit masks + */ +#define SMM665_TRIGGER_RST 0x8000 +#define SMM665_TRIGGER_HEALTHY 0x4000 +#define SMM665_TRIGGER_POWEROFF 0x2000 +#define SMM665_TRIGGER_SHUTDOWN 0x1000 +#define SMM665_ADC_MASK 0x03ff + +#define smm665_is_critical(lim) ((lim) & (SMM665_TRIGGER_RST \ + | SMM665_TRIGGER_POWEROFF \ + | SMM665_TRIGGER_SHUTDOWN)) +/* + * Fault register bit definitions + * Values are merged from status registers 1/2, + * with status register 1 providing the upper 8 bits. + */ +#define SMM665_FAULT_A 0x0001 +#define SMM665_FAULT_B 0x0002 +#define SMM665_FAULT_C 0x0004 +#define SMM665_FAULT_D 0x0008 +#define SMM665_FAULT_E 0x0010 +#define SMM665_FAULT_F 0x0020 +#define SMM665_FAULT_VDD 0x0040 +#define SMM665_FAULT_12V 0x0080 +#define SMM665_FAULT_TEMP 0x0100 +#define SMM665_FAULT_AIN1 0x0200 +#define SMM665_FAULT_AIN2 0x0400 + +/* + * I2C Register addresses + * + * The configuration register needs to be the configured base register. + * The command/status register address is derived from it. + */ +#define SMM665_REGMASK 0x78 +#define SMM665_CMDREG_BASE 0x48 +#define SMM665_CONFREG_BASE 0x50 + +/* + * Equations given by chip manufacturer to calculate voltage/temperature values + * vref = Reference voltage on VREF_ADC pin (module parameter) + * adc = 10bit ADC value read back from registers + */ + +/* Voltage A-F and VDD */ +#define SMM665_VMON_ADC_TO_VOLTS(adc) ((adc) * vref / 256) + +/* Voltage 12VIN */ +#define SMM665_12VIN_ADC_TO_VOLTS(adc) ((adc) * vref * 3 / 256) + +/* Voltage AIN1, AIN2 */ +#define SMM665_AIN_ADC_TO_VOLTS(adc) ((adc) * vref / 512) + +/* Temp Sensor */ +#define SMM665_TEMP_ADC_TO_CELSIUS(adc) ((adc) <= 511) ? \ + ((int)(adc) * 1000 / 4) : \ + (((int)(adc) - 0x400) * 1000 / 4) + +#define SMM665_NUM_ADC 11 + +/* + * Chip dependent ADC conversion time, in uS + */ +#define SMM665_ADC_WAIT_SMM665 70 +#define SMM665_ADC_WAIT_SMM766 185 + +struct smm665_data { + enum chips type; + int conversion_time; /* ADC conversion time */ + struct device *hwmon_dev; + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + u16 adc[SMM665_NUM_ADC]; /* adc values (raw) */ + u16 faults; /* fault status */ + /* The following values are in mV */ + int critical_min_limit[SMM665_NUM_ADC]; + int alarm_min_limit[SMM665_NUM_ADC]; + int critical_max_limit[SMM665_NUM_ADC]; + int alarm_max_limit[SMM665_NUM_ADC]; + struct i2c_client *cmdreg; +}; + +/* + * smm665_read16() + * + * Read 16 bit value from <reg>, <reg+1>. Upper 8 bits are in <reg>. + */ +static int smm665_read16(struct i2c_client *client, int reg) +{ + int rv, val; + + rv = i2c_smbus_read_byte_data(client, reg); + if (rv < 0) + return rv; + val = rv << 8; + rv = i2c_smbus_read_byte_data(client, reg + 1); + if (rv < 0) + return rv; + val |= rv; + return val; +} + +/* + * Read adc value. + */ +static int smm665_read_adc(struct smm665_data *data, int adc) +{ + struct i2c_client *client = data->cmdreg; + int rv; + int radc; + + /* + * Algorithm for reading ADC, per SMM665 datasheet + * + * {[S][addr][W][Ack]} {[offset][Ack]} {[S][addr][R][Nack]} + * [wait conversion time] + * {[S][addr][R][Ack]} {[datahi][Ack]} {[datalo][Ack][P]} + * + * To implement the first part of this exchange, + * do a full read transaction and expect a failure/Nack. + * This sets up the address pointer on the SMM665 + * and starts the ADC conversion. + * Then do a two-byte read transaction. + */ + rv = i2c_smbus_read_byte_data(client, adc << 3); + if (rv != -ENXIO) { + /* + * We expect ENXIO to reflect NACK + * (per Documentation/i2c/fault-codes). + * Everything else is an error. + */ + dev_dbg(&client->dev, + "Unexpected return code %d when setting ADC index", rv); + return (rv < 0) ? rv : -EIO; + } + + udelay(data->conversion_time); + + /* + * Now read two bytes. + * + * Neither i2c_smbus_read_byte() nor + * i2c_smbus_read_block_data() worked here, + * so use i2c_smbus_read_word_data() instead. + * We could also try to use i2c_master_recv(), + * but that is not always supported. + */ + rv = i2c_smbus_read_word_data(client, 0); + if (rv < 0) { + dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv); + return -1; + } + /* + * Validate/verify readback adc channel (in bit 11..14). + * High byte is in lower 8 bit of rv, so only shift by 3. + */ + radc = (rv >> 3) & 0x0f; + if (radc != adc) { + dev_dbg(&client->dev, "Unexpected RADC: Expected %d got %d", + adc, radc); + return -EIO; + } + /* + * Chip replies with H/L, while SMBus expects L/H. + * Thus, byte order is reversed, and we have to swap + * the result. + */ + rv = swab16(rv) & SMM665_ADC_MASK; + + return rv; +} + +static struct smm665_data *smm665_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smm665_data *data = i2c_get_clientdata(client); + struct smm665_data *ret = data; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + int i, val; + + /* + * read status registers + */ + val = smm665_read16(client, SMM665_MISC8_STATUS1); + if (unlikely(val < 0)) { + ret = ERR_PTR(val); + goto abort; + } + data->faults = val; + + /* Read adc registers */ + for (i = 0; i < SMM665_NUM_ADC; i++) { + val = smm665_read_adc(data, i); + if (unlikely(val < 0)) { + ret = ERR_PTR(val); + goto abort; + } + data->adc[i] = val; + } + data->last_updated = jiffies; + data->valid = 1; + } +abort: + mutex_unlock(&data->update_lock); + return ret; +} + +/* Return converted value from given adc */ +static int smm665_convert(u16 adcval, int index) +{ + int val = 0; + + switch (index) { + case SMM665_MISC16_ADC_DATA_12V: + val = SMM665_12VIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); + break; + + case SMM665_MISC16_ADC_DATA_VDD: + case SMM665_MISC16_ADC_DATA_A: + case SMM665_MISC16_ADC_DATA_B: + case SMM665_MISC16_ADC_DATA_C: + case SMM665_MISC16_ADC_DATA_D: + case SMM665_MISC16_ADC_DATA_E: + case SMM665_MISC16_ADC_DATA_F: + val = SMM665_VMON_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); + break; + + case SMM665_MISC16_ADC_DATA_AIN1: + case SMM665_MISC16_ADC_DATA_AIN2: + val = SMM665_AIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); + break; + + case SMM665_MISC16_ADC_DATA_INT_TEMP: + val = SMM665_TEMP_ADC_TO_CELSIUS(adcval & SMM665_ADC_MASK); + break; + + default: + /* If we get here, the developer messed up */ + WARN_ON_ONCE(1); + break; + } + + return val; +} + +static int smm665_get_min(struct device *dev, int index) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smm665_data *data = i2c_get_clientdata(client); + + return data->alarm_min_limit[index]; +} + +static int smm665_get_max(struct device *dev, int index) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smm665_data *data = i2c_get_clientdata(client); + + return data->alarm_max_limit[index]; +} + +static int smm665_get_lcrit(struct device *dev, int index) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smm665_data *data = i2c_get_clientdata(client); + + return data->critical_min_limit[index]; +} + +static int smm665_get_crit(struct device *dev, int index) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smm665_data *data = i2c_get_clientdata(client); + + return data->critical_max_limit[index]; +} + +static ssize_t smm665_show_crit_alarm(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct smm665_data *data = smm665_update_device(dev); + int val = 0; + + if (IS_ERR(data)) + return PTR_ERR(data); + + if (data->faults & (1 << attr->index)) + val = 1; + + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t smm665_show_input(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct smm665_data *data = smm665_update_device(dev); + int adc = attr->index; + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = smm665_convert(data->adc[adc], adc); + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +#define SMM665_SHOW(what) \ + static ssize_t smm665_show_##what(struct device *dev, \ + struct device_attribute *da, char *buf) \ +{ \ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \ + const int val = smm665_get_##what(dev, attr->index); \ + return snprintf(buf, PAGE_SIZE, "%d\n", val); \ +} + +SMM665_SHOW(min); +SMM665_SHOW(max); +SMM665_SHOW(lcrit); +SMM665_SHOW(crit); + +/* These macros are used below in constructing device attribute objects + * for use with sysfs_create_group() to make a sysfs device file + * for each register. + */ + +#define SMM665_ATTR(name, type, cmd_idx) \ + static SENSOR_DEVICE_ATTR(name##_##type, S_IRUGO, \ + smm665_show_##type, NULL, cmd_idx) + +/* Construct a sensor_device_attribute structure for each register */ + +/* Input voltages */ +SMM665_ATTR(in1, input, SMM665_MISC16_ADC_DATA_12V); +SMM665_ATTR(in2, input, SMM665_MISC16_ADC_DATA_VDD); +SMM665_ATTR(in3, input, SMM665_MISC16_ADC_DATA_A); +SMM665_ATTR(in4, input, SMM665_MISC16_ADC_DATA_B); +SMM665_ATTR(in5, input, SMM665_MISC16_ADC_DATA_C); +SMM665_ATTR(in6, input, SMM665_MISC16_ADC_DATA_D); +SMM665_ATTR(in7, input, SMM665_MISC16_ADC_DATA_E); +SMM665_ATTR(in8, input, SMM665_MISC16_ADC_DATA_F); +SMM665_ATTR(in9, input, SMM665_MISC16_ADC_DATA_AIN1); +SMM665_ATTR(in10, input, SMM665_MISC16_ADC_DATA_AIN2); + +/* Input voltages min */ +SMM665_ATTR(in1, min, SMM665_MISC16_ADC_DATA_12V); +SMM665_ATTR(in2, min, SMM665_MISC16_ADC_DATA_VDD); +SMM665_ATTR(in3, min, SMM665_MISC16_ADC_DATA_A); +SMM665_ATTR(in4, min, SMM665_MISC16_ADC_DATA_B); +SMM665_ATTR(in5, min, SMM665_MISC16_ADC_DATA_C); +SMM665_ATTR(in6, min, SMM665_MISC16_ADC_DATA_D); +SMM665_ATTR(in7, min, SMM665_MISC16_ADC_DATA_E); +SMM665_ATTR(in8, min, SMM665_MISC16_ADC_DATA_F); +SMM665_ATTR(in9, min, SMM665_MISC16_ADC_DATA_AIN1); +SMM665_ATTR(in10, min, SMM665_MISC16_ADC_DATA_AIN2); + +/* Input voltages max */ +SMM665_ATTR(in1, max, SMM665_MISC16_ADC_DATA_12V); +SMM665_ATTR(in2, max, SMM665_MISC16_ADC_DATA_VDD); +SMM665_ATTR(in3, max, SMM665_MISC16_ADC_DATA_A); +SMM665_ATTR(in4, max, SMM665_MISC16_ADC_DATA_B); +SMM665_ATTR(in5, max, SMM665_MISC16_ADC_DATA_C); +SMM665_ATTR(in6, max, SMM665_MISC16_ADC_DATA_D); +SMM665_ATTR(in7, max, SMM665_MISC16_ADC_DATA_E); +SMM665_ATTR(in8, max, SMM665_MISC16_ADC_DATA_F); +SMM665_ATTR(in9, max, SMM665_MISC16_ADC_DATA_AIN1); +SMM665_ATTR(in10, max, SMM665_MISC16_ADC_DATA_AIN2); + +/* Input voltages lcrit */ +SMM665_ATTR(in1, lcrit, SMM665_MISC16_ADC_DATA_12V); +SMM665_ATTR(in2, lcrit, SMM665_MISC16_ADC_DATA_VDD); +SMM665_ATTR(in3, lcrit, SMM665_MISC16_ADC_DATA_A); +SMM665_ATTR(in4, lcrit, SMM665_MISC16_ADC_DATA_B); +SMM665_ATTR(in5, lcrit, SMM665_MISC16_ADC_DATA_C); +SMM665_ATTR(in6, lcrit, SMM665_MISC16_ADC_DATA_D); +SMM665_ATTR(in7, lcrit, SMM665_MISC16_ADC_DATA_E); +SMM665_ATTR(in8, lcrit, SMM665_MISC16_ADC_DATA_F); +SMM665_ATTR(in9, lcrit, SMM665_MISC16_ADC_DATA_AIN1); +SMM665_ATTR(in10, lcrit, SMM665_MISC16_ADC_DATA_AIN2); + +/* Input voltages crit */ +SMM665_ATTR(in1, crit, SMM665_MISC16_ADC_DATA_12V); +SMM665_ATTR(in2, crit, SMM665_MISC16_ADC_DATA_VDD); +SMM665_ATTR(in3, crit, SMM665_MISC16_ADC_DATA_A); +SMM665_ATTR(in4, crit, SMM665_MISC16_ADC_DATA_B); +SMM665_ATTR(in5, crit, SMM665_MISC16_ADC_DATA_C); +SMM665_ATTR(in6, crit, SMM665_MISC16_ADC_DATA_D); +SMM665_ATTR(in7, crit, SMM665_MISC16_ADC_DATA_E); +SMM665_ATTR(in8, crit, SMM665_MISC16_ADC_DATA_F); +SMM665_ATTR(in9, crit, SMM665_MISC16_ADC_DATA_AIN1); +SMM665_ATTR(in10, crit, SMM665_MISC16_ADC_DATA_AIN2); + +/* critical alarms */ +SMM665_ATTR(in1, crit_alarm, SMM665_FAULT_12V); +SMM665_ATTR(in2, crit_alarm, SMM665_FAULT_VDD); +SMM665_ATTR(in3, crit_alarm, SMM665_FAULT_A); +SMM665_ATTR(in4, crit_alarm, SMM665_FAULT_B); +SMM665_ATTR(in5, crit_alarm, SMM665_FAULT_C); +SMM665_ATTR(in6, crit_alarm, SMM665_FAULT_D); +SMM665_ATTR(in7, crit_alarm, SMM665_FAULT_E); +SMM665_ATTR(in8, crit_alarm, SMM665_FAULT_F); +SMM665_ATTR(in9, crit_alarm, SMM665_FAULT_AIN1); +SMM665_ATTR(in10, crit_alarm, SMM665_FAULT_AIN2); + +/* Temperature */ +SMM665_ATTR(temp1, input, SMM665_MISC16_ADC_DATA_INT_TEMP); +SMM665_ATTR(temp1, min, SMM665_MISC16_ADC_DATA_INT_TEMP); +SMM665_ATTR(temp1, max, SMM665_MISC16_ADC_DATA_INT_TEMP); +SMM665_ATTR(temp1, lcrit, SMM665_MISC16_ADC_DATA_INT_TEMP); +SMM665_ATTR(temp1, crit, SMM665_MISC16_ADC_DATA_INT_TEMP); +SMM665_ATTR(temp1, crit_alarm, SMM665_FAULT_TEMP); + +/* + * Finally, construct an array of pointers to members of the above objects, + * as required for sysfs_create_group() + */ +static struct attribute *smm665_attributes[] = { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_lcrit.dev_attr.attr, + &sensor_dev_attr_in1_crit.dev_attr.attr, + &sensor_dev_attr_in1_crit_alarm.dev_attr.attr, + + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_lcrit.dev_attr.attr, + &sensor_dev_attr_in2_crit.dev_attr.attr, + &sensor_dev_attr_in2_crit_alarm.dev_attr.attr, + + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_lcrit.dev_attr.attr, + &sensor_dev_attr_in3_crit.dev_attr.attr, + &sensor_dev_attr_in3_crit_alarm.dev_attr.attr, + + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_lcrit.dev_attr.attr, + &sensor_dev_attr_in4_crit.dev_attr.attr, + &sensor_dev_attr_in4_crit_alarm.dev_attr.attr, + + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in5_lcrit.dev_attr.attr, + &sensor_dev_attr_in5_crit.dev_attr.attr, + &sensor_dev_attr_in5_crit_alarm.dev_attr.attr, + + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in6_lcrit.dev_attr.attr, + &sensor_dev_attr_in6_crit.dev_attr.attr, + &sensor_dev_attr_in6_crit_alarm.dev_attr.attr, + + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in7_lcrit.dev_attr.attr, + &sensor_dev_attr_in7_crit.dev_attr.attr, + &sensor_dev_attr_in7_crit_alarm.dev_attr.attr, + + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in8_min.dev_attr.attr, + &sensor_dev_attr_in8_max.dev_attr.attr, + &sensor_dev_attr_in8_lcrit.dev_attr.attr, + &sensor_dev_attr_in8_crit.dev_attr.attr, + &sensor_dev_attr_in8_crit_alarm.dev_attr.attr, + + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in9_min.dev_attr.attr, + &sensor_dev_attr_in9_max.dev_attr.attr, + &sensor_dev_attr_in9_lcrit.dev_attr.attr, + &sensor_dev_attr_in9_crit.dev_attr.attr, + &sensor_dev_attr_in9_crit_alarm.dev_attr.attr, + + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in10_min.dev_attr.attr, + &sensor_dev_attr_in10_max.dev_attr.attr, + &sensor_dev_attr_in10_lcrit.dev_attr.attr, + &sensor_dev_attr_in10_crit.dev_attr.attr, + &sensor_dev_attr_in10_crit_alarm.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_lcrit.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + + NULL, +}; + +static const struct attribute_group smm665_group = { + .attrs = smm665_attributes, +}; + +static int smm665_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct smm665_data *data; + int i, ret; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA + | I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + if (i2c_smbus_read_byte_data(client, SMM665_ADOC_ENABLE) < 0) + return -ENODEV; + + ret = -ENOMEM; + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + goto out_return; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + data->type = id->driver_data; + data->cmdreg = i2c_new_dummy(adapter, (client->addr & ~SMM665_REGMASK) + | SMM665_CMDREG_BASE); + if (!data->cmdreg) + goto out_kfree; + + switch (data->type) { + case smm465: + case smm665: + data->conversion_time = SMM665_ADC_WAIT_SMM665; + break; + case smm665c: + case smm764: + case smm766: + data->conversion_time = SMM665_ADC_WAIT_SMM766; + break; + } + + ret = -ENODEV; + if (i2c_smbus_read_byte_data(data->cmdreg, SMM665_MISC8_CMD_STS) < 0) + goto out_unregister; + + /* + * Read limits. + * + * Limit registers start with register SMM665_LIMIT_BASE. + * Each channel uses 8 registers, providing four limit values + * per channel. Each limit value requires two registers, with the + * high byte in the first register and the low byte in the second + * register. The first two limits are under limit values, followed + * by two over limit values. + * + * Limit register order matches the ADC register order, so we use + * ADC register defines throughout the code to index limit registers. + * + * We save the first retrieved value both as "critical" and "alarm" + * value. The second value overwrites either the critical or the + * alarm value, depending on its configuration. This ensures that both + * critical and alarm values are initialized, even if both registers are + * configured as critical or non-critical. + */ + for (i = 0; i < SMM665_NUM_ADC; i++) { + int val; + + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8); + if (unlikely(val < 0)) + goto out_unregister; + data->critical_min_limit[i] = data->alarm_min_limit[i] + = smm665_convert(val, i); + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 2); + if (unlikely(val < 0)) + goto out_unregister; + if (smm665_is_critical(val)) + data->critical_min_limit[i] = smm665_convert(val, i); + else + data->alarm_min_limit[i] = smm665_convert(val, i); + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 4); + if (unlikely(val < 0)) + goto out_unregister; + data->critical_max_limit[i] = data->alarm_max_limit[i] + = smm665_convert(val, i); + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 6); + if (unlikely(val < 0)) + goto out_unregister; + if (smm665_is_critical(val)) + data->critical_max_limit[i] = smm665_convert(val, i); + else + data->alarm_max_limit[i] = smm665_convert(val, i); + } + + /* Register sysfs hooks */ + ret = sysfs_create_group(&client->dev.kobj, &smm665_group); + if (ret) + goto out_unregister; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + goto out_remove_group; + } + + return 0; + +out_remove_group: + sysfs_remove_group(&client->dev.kobj, &smm665_group); +out_unregister: + i2c_unregister_device(data->cmdreg); +out_kfree: + kfree(data); +out_return: + return ret; +} + +static int smm665_remove(struct i2c_client *client) +{ + struct smm665_data *data = i2c_get_clientdata(client); + + i2c_unregister_device(data->cmdreg); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &smm665_group); + + kfree(data); + + return 0; +} + +static const struct i2c_device_id smm665_id[] = { + {"smm465", smm465}, + {"smm665", smm665}, + {"smm665c", smm665c}, + {"smm764", smm764}, + {"smm766", smm766}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, smm665_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver smm665_driver = { + .driver = { + .name = "smm665", + }, + .probe = smm665_probe, + .remove = smm665_remove, + .id_table = smm665_id, +}; + +static int __init smm665_init(void) +{ + return i2c_add_driver(&smm665_driver); +} + +static void __exit smm665_exit(void) +{ + i2c_del_driver(&smm665_driver); +} + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("SMM665 driver"); +MODULE_LICENSE("GPL"); + +module_init(smm665_init); +module_exit(smm665_exit); diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 64207df..2de76cc 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -506,15 +506,22 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, return (flags & REQ_FAILED) ? -EIO : 0; } -static void ide_cd_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd) +/* + * returns true if rq has been completed + */ +static bool ide_cd_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd) { unsigned int nr_bytes = cmd->nbytes - cmd->nleft; if (cmd->tf_flags & IDE_TFLAG_WRITE) nr_bytes -= cmd->last_xfer_len; - if (nr_bytes > 0) + if (nr_bytes > 0) { ide_complete_rq(drive, 0, nr_bytes); + return true; + } + + return false; } static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) @@ -679,7 +686,8 @@ out_end: } if (uptodate == 0 && rq->bio) - ide_cd_error_cmd(drive, cmd); + if (ide_cd_error_cmd(drive, cmd)) + return ide_stopped; /* make sure it's fully ended */ if (blk_fs_request(rq) == 0) { diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 67fb735..34b9872 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -480,13 +480,9 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) u16 nsect = 0; char __user *buf = (char __user *)arg; - req_task = kzalloc(tasksize, GFP_KERNEL); - if (req_task == NULL) - return -ENOMEM; - if (copy_from_user(req_task, buf, tasksize)) { - kfree(req_task); - return -EFAULT; - } + req_task = memdup_user(buf, tasksize); + if (IS_ERR(req_task)) + return PTR_ERR(req_task); taskout = req_task->out_size; taskin = req_task->in_size; diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index 1d80f1f..7002765 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c @@ -64,7 +64,7 @@ static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) pair = ide_get_pair_dev(drive); if (pair) - safe = min(safe, pair->pio_mode - XFER_PIO_0); + safe = min_t(u8, safe, pair->pio_mode - XFER_PIO_0); tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe); } diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index 3c73677..bed3e39 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -114,7 +114,7 @@ static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) pair = ide_get_pair_dev(drive); if (pair) - safe = min(safe, pair->pio_mode - XFER_PIO_0); + safe = min_t(u8, safe, pair->pio_mode - XFER_PIO_0); /* * Update Command Transfer Mode for master/slave and Data * Transfer Mode for this drive. diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index 101f400..d2a0997 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -79,7 +79,7 @@ static struct via_isa_bridge { { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt6415", PCI_DEVICE_ID_VIA_6410, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index d870f9c..9bbf491 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -250,12 +250,17 @@ static int c4iw_rdev_open(struct c4iw_rdev *rdev) rdev->cqshift = PAGE_SHIFT - ilog2(rdev->lldi.ucq_density); rdev->cqmask = rdev->lldi.ucq_density - 1; PDBG("%s dev %s stag start 0x%0x size 0x%0x num stags %d " - "pbl start 0x%0x size 0x%0x rq start 0x%0x size 0x%0x\n", + "pbl start 0x%0x size 0x%0x rq start 0x%0x size 0x%0x " + "qp qid start %u size %u cq qid start %u size %u\n", __func__, pci_name(rdev->lldi.pdev), rdev->lldi.vr->stag.start, rdev->lldi.vr->stag.size, c4iw_num_stags(rdev), rdev->lldi.vr->pbl.start, rdev->lldi.vr->pbl.size, rdev->lldi.vr->rq.start, - rdev->lldi.vr->rq.size); + rdev->lldi.vr->rq.size, + rdev->lldi.vr->qp.start, + rdev->lldi.vr->qp.size, + rdev->lldi.vr->cq.start, + rdev->lldi.vr->cq.size); PDBG("udb len 0x%x udb base %p db_reg %p gts_reg %p qpshift %lu " "qpmask 0x%x cqshift %lu cqmask 0x%x\n", (unsigned)pci_resource_len(rdev->lldi.pdev, 2), diff --git a/drivers/infiniband/hw/cxgb4/resource.c b/drivers/infiniband/hw/cxgb4/resource.c index fb195d1..83b23df 100644 --- a/drivers/infiniband/hw/cxgb4/resource.c +++ b/drivers/infiniband/hw/cxgb4/resource.c @@ -110,11 +110,12 @@ static int c4iw_init_qid_fifo(struct c4iw_rdev *rdev) spin_lock_init(&rdev->resource.qid_fifo_lock); - if (kfifo_alloc(&rdev->resource.qid_fifo, T4_MAX_QIDS * sizeof(u32), - GFP_KERNEL)) + if (kfifo_alloc(&rdev->resource.qid_fifo, rdev->lldi.vr->qp.size * + sizeof(u32), GFP_KERNEL)) return -ENOMEM; - for (i = T4_QID_BASE; i < T4_QID_BASE + T4_MAX_QIDS; i++) + for (i = rdev->lldi.vr->qp.start; + i < rdev->lldi.vr->qp.start + rdev->lldi.vr->qp.size; i++) if (!(i & rdev->qpmask)) kfifo_in(&rdev->resource.qid_fifo, (unsigned char *) &i, sizeof(u32)); diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h index aef55f4..24f3690 100644 --- a/drivers/infiniband/hw/cxgb4/t4.h +++ b/drivers/infiniband/hw/cxgb4/t4.h @@ -36,8 +36,6 @@ #include "t4_msg.h" #include "t4fw_ri_api.h" -#define T4_QID_BASE 1024 -#define T4_MAX_QIDS 256 #define T4_MAX_NUM_QP (1<<16) #define T4_MAX_NUM_CQ (1<<15) #define T4_MAX_NUM_PD (1<<15) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 054edf3..c908c5f 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -492,13 +492,15 @@ static int str_to_user(const char *str, unsigned int maxlen, void __user *p) } #define OLD_KEY_MAX 0x1ff -static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user *p, int compat_mode) +static int handle_eviocgbit(struct input_dev *dev, + unsigned int type, unsigned int size, + void __user *p, int compat_mode) { static unsigned long keymax_warn_time; unsigned long *bits; int len; - switch (_IOC_NR(cmd) & EV_MAX) { + switch (type) { case 0: bits = dev->evbit; len = EV_MAX; break; case EV_KEY: bits = dev->keybit; len = KEY_MAX; break; @@ -517,7 +519,7 @@ static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user * EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len' * should be in bytes, not in bits. */ - if ((_IOC_NR(cmd) & EV_MAX) == EV_KEY && _IOC_SIZE(cmd) == OLD_KEY_MAX) { + if (type == EV_KEY && size == OLD_KEY_MAX) { len = OLD_KEY_MAX; if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000)) printk(KERN_WARNING @@ -528,7 +530,7 @@ static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long)); } - return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode); + return bits_to_user(bits, len, size, p, compat_mode); } #undef OLD_KEY_MAX @@ -542,8 +544,10 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, struct ff_effect effect; int __user *ip = (int __user *)p; unsigned int i, t, u, v; + unsigned int size; int error; + /* First we check for fixed-length commands */ switch (cmd) { case EVIOCGVERSION: @@ -610,112 +614,102 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, return evdev_grab(evdev, client); else return evdev_ungrab(evdev, client); + } - default: - - if (_IOC_TYPE(cmd) != 'E') - return -EINVAL; - - if (_IOC_DIR(cmd) == _IOC_READ) { + size = _IOC_SIZE(cmd); - if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0))) - return handle_eviocgbit(dev, cmd, p, compat_mode); + /* Now check variable-length commands */ +#define EVIOC_MASK_SIZE(nr) ((nr) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT)) - if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0))) - return bits_to_user(dev->key, KEY_MAX, _IOC_SIZE(cmd), - p, compat_mode); + switch (EVIOC_MASK_SIZE(cmd)) { - if (_IOC_NR(cmd) == _IOC_NR(EVIOCGLED(0))) - return bits_to_user(dev->led, LED_MAX, _IOC_SIZE(cmd), - p, compat_mode); + case EVIOCGKEY(0): + return bits_to_user(dev->key, KEY_MAX, size, p, compat_mode); - if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSND(0))) - return bits_to_user(dev->snd, SND_MAX, _IOC_SIZE(cmd), - p, compat_mode); + case EVIOCGLED(0): + return bits_to_user(dev->led, LED_MAX, size, p, compat_mode); - if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSW(0))) - return bits_to_user(dev->sw, SW_MAX, _IOC_SIZE(cmd), - p, compat_mode); + case EVIOCGSND(0): + return bits_to_user(dev->snd, SND_MAX, size, p, compat_mode); - if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0))) - return str_to_user(dev->name, _IOC_SIZE(cmd), p); + case EVIOCGSW(0): + return bits_to_user(dev->sw, SW_MAX, size, p, compat_mode); - if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0))) - return str_to_user(dev->phys, _IOC_SIZE(cmd), p); + case EVIOCGNAME(0): + return str_to_user(dev->name, size, p); - if (_IOC_NR(cmd) == _IOC_NR(EVIOCGUNIQ(0))) - return str_to_user(dev->uniq, _IOC_SIZE(cmd), p); + case EVIOCGPHYS(0): + return str_to_user(dev->phys, size, p); - if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) { + case EVIOCGUNIQ(0): + return str_to_user(dev->uniq, size, p); - t = _IOC_NR(cmd) & ABS_MAX; + case EVIOC_MASK_SIZE(EVIOCSFF): + if (input_ff_effect_from_user(p, size, &effect)) + return -EFAULT; - abs.value = dev->abs[t]; - abs.minimum = dev->absmin[t]; - abs.maximum = dev->absmax[t]; - abs.fuzz = dev->absfuzz[t]; - abs.flat = dev->absflat[t]; - abs.resolution = dev->absres[t]; + error = input_ff_upload(dev, &effect, file); - if (copy_to_user(p, &abs, min_t(size_t, - _IOC_SIZE(cmd), - sizeof(struct input_absinfo)))) - return -EFAULT; + if (put_user(effect.id, &(((struct ff_effect __user *)p)->id))) + return -EFAULT; - return 0; - } + return error; + } - } + /* Multi-number variable-length handlers */ + if (_IOC_TYPE(cmd) != 'E') + return -EINVAL; - if (_IOC_DIR(cmd) == _IOC_WRITE) { + if (_IOC_DIR(cmd) == _IOC_READ) { - if (_IOC_NR(cmd) == _IOC_NR(EVIOCSFF)) { + if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0))) + return handle_eviocgbit(dev, + _IOC_NR(cmd) & EV_MAX, size, + p, compat_mode); - if (input_ff_effect_from_user(p, _IOC_SIZE(cmd), &effect)) - return -EFAULT; + if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) { - error = input_ff_upload(dev, &effect, file); + t = _IOC_NR(cmd) & ABS_MAX; + abs = dev->absinfo[t]; - if (put_user(effect.id, &(((struct ff_effect __user *)p)->id))) - return -EFAULT; + if (copy_to_user(p, &abs, min_t(size_t, + size, sizeof(struct input_absinfo)))) + return -EFAULT; - return error; - } + return 0; + } + } - if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) { + if (_IOC_DIR(cmd) == _IOC_READ) { - t = _IOC_NR(cmd) & ABS_MAX; + if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) { - if (copy_from_user(&abs, p, min_t(size_t, - _IOC_SIZE(cmd), - sizeof(struct input_absinfo)))) - return -EFAULT; + t = _IOC_NR(cmd) & ABS_MAX; - /* We can't change number of reserved MT slots */ - if (t == ABS_MT_SLOT) - return -EINVAL; + if (copy_from_user(&abs, p, min_t(size_t, + size, sizeof(struct input_absinfo)))) + return -EFAULT; - /* - * Take event lock to ensure that we are not - * changing device parameters in the middle - * of event. - */ - spin_lock_irq(&dev->event_lock); + if (size < sizeof(struct input_absinfo)) + abs.resolution = 0; - dev->abs[t] = abs.value; - dev->absmin[t] = abs.minimum; - dev->absmax[t] = abs.maximum; - dev->absfuzz[t] = abs.fuzz; - dev->absflat[t] = abs.flat; - dev->absres[t] = _IOC_SIZE(cmd) < sizeof(struct input_absinfo) ? - 0 : abs.resolution; + /* We can't change number of reserved MT slots */ + if (t == ABS_MT_SLOT) + return -EINVAL; - spin_unlock_irq(&dev->event_lock); + /* + * Take event lock to ensure that we are not + * changing device parameters in the middle + * of event. + */ + spin_lock_irq(&dev->event_lock); + dev->absinfo[t] = abs; + spin_unlock_irq(&dev->event_lock); - return 0; - } + return 0; } } + return -EINVAL; } diff --git a/drivers/input/input.c b/drivers/input/input.c index e1243b4..a9b025f 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -182,7 +182,7 @@ static int input_handle_abs_event(struct input_dev *dev, is_mt_event = code >= ABS_MT_FIRST && code <= ABS_MT_LAST; if (!is_mt_event) { - pold = &dev->abs[code]; + pold = &dev->absinfo[code].value; } else if (dev->mt) { struct input_mt_slot *mtslot = &dev->mt[dev->slot]; pold = &mtslot->abs[code - ABS_MT_FIRST]; @@ -196,7 +196,7 @@ static int input_handle_abs_event(struct input_dev *dev, if (pold) { *pval = input_defuzz_abs_event(*pval, *pold, - dev->absfuzz[code]); + dev->absinfo[code].fuzz); if (*pold == *pval) return INPUT_IGNORE_EVENT; @@ -204,8 +204,8 @@ static int input_handle_abs_event(struct input_dev *dev, } /* Flush pending "slot" event */ - if (is_mt_event && dev->slot != dev->abs[ABS_MT_SLOT]) { - dev->abs[ABS_MT_SLOT] = dev->slot; + if (is_mt_event && dev->slot != input_abs_get_val(dev, ABS_MT_SLOT)) { + input_abs_set_val(dev, ABS_MT_SLOT, dev->slot); input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot); } @@ -391,6 +391,43 @@ void input_inject_event(struct input_handle *handle, EXPORT_SYMBOL(input_inject_event); /** + * input_alloc_absinfo - allocates array of input_absinfo structs + * @dev: the input device emitting absolute events + * + * If the absinfo struct the caller asked for is already allocated, this + * functions will not do anything. + */ +void input_alloc_absinfo(struct input_dev *dev) +{ + if (!dev->absinfo) + dev->absinfo = kcalloc(ABS_CNT, sizeof(struct input_absinfo), + GFP_KERNEL); + + WARN(!dev->absinfo, "%s(): kcalloc() failed?\n", __func__); +} +EXPORT_SYMBOL(input_alloc_absinfo); + +void input_set_abs_params(struct input_dev *dev, unsigned int axis, + int min, int max, int fuzz, int flat) +{ + struct input_absinfo *absinfo; + + input_alloc_absinfo(dev); + if (!dev->absinfo) + return; + + absinfo = &dev->absinfo[axis]; + absinfo->minimum = min; + absinfo->maximum = max; + absinfo->fuzz = fuzz; + absinfo->flat = flat; + + dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis); +} +EXPORT_SYMBOL(input_set_abs_params); + + +/** * input_grab_device - grabs device for exclusive use * @handle: input handle that wants to own the device * @@ -1308,6 +1345,7 @@ static void input_dev_release(struct device *device) input_ff_destroy(dev); input_mt_destroy_slots(dev); + kfree(dev->absinfo); kfree(dev); module_put(THIS_MODULE); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 6383458..d85bd8a 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -530,7 +530,7 @@ static int joydev_ioctl_common(struct joydev *joydev, { struct input_dev *dev = joydev->handle.dev; size_t len; - int i, j; + int i; const char *name; /* Process fixed-sized commands. */ @@ -562,12 +562,11 @@ static int joydev_ioctl_common(struct joydev *joydev, case JSIOCSCORR: if (copy_from_user(joydev->corr, argp, sizeof(joydev->corr[0]) * joydev->nabs)) - return -EFAULT; + return -EFAULT; for (i = 0; i < joydev->nabs; i++) { - j = joydev->abspam[i]; - joydev->abs[i] = joydev_correct(dev->abs[j], - &joydev->corr[i]); + int val = input_abs_get_val(dev, joydev->abspam[i]); + joydev->abs[i] = joydev_correct(val, &joydev->corr[i]); } return 0; @@ -848,25 +847,27 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev, for (i = 0; i < joydev->nabs; i++) { j = joydev->abspam[i]; - if (dev->absmax[j] == dev->absmin[j]) { + if (input_abs_get_max(dev, j) == input_abs_get_min(dev, j)) { joydev->corr[i].type = JS_CORR_NONE; - joydev->abs[i] = dev->abs[j]; + joydev->abs[i] = input_abs_get_val(dev, j); continue; } joydev->corr[i].type = JS_CORR_BROKEN; - joydev->corr[i].prec = dev->absfuzz[j]; - joydev->corr[i].coef[0] = - (dev->absmax[j] + dev->absmin[j]) / 2 - dev->absflat[j]; - joydev->corr[i].coef[1] = - (dev->absmax[j] + dev->absmin[j]) / 2 + dev->absflat[j]; + joydev->corr[i].prec = input_abs_get_fuzz(dev, j); + + t = (input_abs_get_max(dev, j) + input_abs_get_min(dev, j)) / 2; + joydev->corr[i].coef[0] = t - input_abs_get_flat(dev, j); + joydev->corr[i].coef[1] = t + input_abs_get_flat(dev, j); - t = (dev->absmax[j] - dev->absmin[j]) / 2 - 2 * dev->absflat[j]; + t = (input_abs_get_max(dev, j) - input_abs_get_min(dev, j)) / 2 + - 2 * input_abs_get_flat(dev, j); if (t) { joydev->corr[i].coef[2] = (1 << 29) / t; joydev->corr[i].coef[3] = (1 << 29) / t; - joydev->abs[i] = joydev_correct(dev->abs[j], - joydev->corr + i); + joydev->abs[i] = + joydev_correct(input_abs_get_val(dev, j), + joydev->corr + i); } } diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c index 6489f40..d259b41 100644 --- a/drivers/input/joystick/a3d.c +++ b/drivers/input/joystick/a3d.c @@ -342,7 +342,8 @@ static int a3d_connect(struct gameport *gameport, struct gameport_driver *drv) for (i = 0; i < 4; i++) { if (i < 2) - input_set_abs_params(input_dev, axes[i], 48, input_dev->abs[axes[i]] * 2 - 48, 0, 8); + input_set_abs_params(input_dev, axes[i], + 48, input_abs_get_val(input_dev, axes[i]) * 2 - 48, 0, 8); else input_set_abs_params(input_dev, axes[i], 2, 253, 0, 0); input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0); diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c index 89c4c08..b992fbf 100644 --- a/drivers/input/joystick/adi.c +++ b/drivers/input/joystick/adi.c @@ -452,7 +452,7 @@ static void adi_init_center(struct adi *adi) for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++) { t = adi->abs[i]; - x = adi->dev->abs[t]; + x = input_abs_get_val(adi->dev, t); if (t == ABS_THROTTLE || t == ABS_RUDDER || adi->id == ADI_ID_WGPE) x = i < adi->axes10 ? 512 : 128; diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c index 05022f0..e90694f 100644 --- a/drivers/input/joystick/amijoy.c +++ b/drivers/input/joystick/amijoy.c @@ -139,8 +139,8 @@ static int __init amijoy_init(void) amijoy_dev[i]->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); for (j = 0; j < 2; j++) { - amijoy_dev[i]->absmin[ABS_X + j] = -1; - amijoy_dev[i]->absmax[ABS_X + j] = 1; + XXinput_set_abs_params(amijoy_dev[i], ABS_X + j, + -1, 1, 0, 0); } err = input_register_device(amijoy_dev[i]); diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c index 45ac70e..0536b1b 100644 --- a/drivers/input/joystick/gf2k.c +++ b/drivers/input/joystick/gf2k.c @@ -318,11 +318,8 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv) for (i = 0; i < gf2k_axes[gf2k->id]; i++) set_bit(gf2k_abs[i], input_dev->absbit); - for (i = 0; i < gf2k_hats[gf2k->id]; i++) { - set_bit(ABS_HAT0X + i, input_dev->absbit); - input_dev->absmin[ABS_HAT0X + i] = -1; - input_dev->absmax[ABS_HAT0X + i] = 1; - } + for (i = 0; i < gf2k_hats[gf2k->id]; i++) + input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0); for (i = 0; i < gf2k_joys[gf2k->id]; i++) set_bit(gf2k_btn_joy[i], input_dev->keybit); @@ -334,11 +331,14 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv) gf2k_read(gf2k, data); for (i = 0; i < gf2k_axes[gf2k->id]; i++) { - input_dev->absmax[gf2k_abs[i]] = (i < 2) ? input_dev->abs[gf2k_abs[i]] * 2 - 32 : - input_dev->abs[gf2k_abs[0]] + input_dev->abs[gf2k_abs[1]] - 32; - input_dev->absmin[gf2k_abs[i]] = 32; - input_dev->absfuzz[gf2k_abs[i]] = 8; - input_dev->absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0; + int max = i < 2 ? + input_abs_get_val(input_dev, gf2k_abs[i]) * 2 : + input_abs_get_val(input_dev, gf2k_abs[0]) + + input_abs_get_val(input_dev, gf2k_abs[1]); + int flat = i < 2 ? 24 : 0; + + input_set_abs_params(input_dev, gf2k_abs[i], + 32, max - 32, 8, flat); } err = input_register_device(gf2k->dev); diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c index 2478289..16fb19d 100644 --- a/drivers/input/joystick/interact.c +++ b/drivers/input/joystick/interact.c @@ -270,18 +270,14 @@ static int interact_connect(struct gameport *gameport, struct gameport_driver *d input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); for (i = 0; (t = interact_type[interact->type].abs[i]) >= 0; i++) { - set_bit(t, input_dev->absbit); - if (i < interact_type[interact->type].b8) { - input_dev->absmin[t] = 0; - input_dev->absmax[t] = 255; - } else { - input_dev->absmin[t] = -1; - input_dev->absmax[t] = 1; - } + if (i < interact_type[interact->type].b8) + input_set_abs_params(input_dev, t, 0, 255, 0, 0); + else + input_set_abs_params(input_dev, t, -1, 1, 0, 0); } for (i = 0; (t = interact_type[interact->type].btn[i]) >= 0; i++) - set_bit(t, input_dev->keybit); + __set_bit(t, input_dev->keybit); err = input_register_device(interact->dev); if (err) diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c index ca13a6b..b8d8611 100644 --- a/drivers/input/joystick/sidewinder.c +++ b/drivers/input/joystick/sidewinder.c @@ -761,17 +761,21 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv) input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); for (j = 0; (bits = sw_bit[sw->type][j]); j++) { + int min, max, fuzz, flat; + code = sw_abs[sw->type][j]; - set_bit(code, input_dev->absbit); - input_dev->absmax[code] = (1 << bits) - 1; - input_dev->absmin[code] = (bits == 1) ? -1 : 0; - input_dev->absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0; - if (code != ABS_THROTTLE) - input_dev->absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0; + min = bits == 1 ? -1 : 0; + max = (1 << bits) - 1; + fuzz = (bits >> 1) >= 2 ? 1 << ((bits >> 1) - 2) : 0; + flat = code == ABS_THROTTLE || bits < 5 ? + 0 : 1 << (bits - 5); + + input_set_abs_params(input_dev, code, + min, max, fuzz, flat); } for (j = 0; (code = sw_btn[sw->type][j]); j++) - set_bit(code, input_dev->keybit); + __set_bit(code, input_dev->keybit); dbg("%s%s [%d-bit id %d data %d]\n", sw->name, comment, m, l, k); diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 269a846..f9fb7fa 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -148,6 +148,7 @@ static const struct xpad_device { { 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX }, { 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX }, { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX }, diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index a9fd147..6069abe 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -39,6 +39,8 @@ struct gpio_keys_drvdata { struct input_dev *input; struct mutex disable_lock; unsigned int n_buttons; + int (*enable)(struct device *dev); + void (*disable)(struct device *dev); struct gpio_button_data data[0]; }; @@ -423,6 +425,21 @@ fail2: return error; } +static int gpio_keys_open(struct input_dev *input) +{ + struct gpio_keys_drvdata *ddata = input_get_drvdata(input); + + return ddata->enable ? ddata->enable(input->dev.parent) : 0; +} + +static void gpio_keys_close(struct input_dev *input) +{ + struct gpio_keys_drvdata *ddata = input_get_drvdata(input); + + if (ddata->disable) + ddata->disable(input->dev.parent); +} + static int __devinit gpio_keys_probe(struct platform_device *pdev) { struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; @@ -444,13 +461,18 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) ddata->input = input; ddata->n_buttons = pdata->nbuttons; + ddata->enable = pdata->enable; + ddata->disable = pdata->disable; mutex_init(&ddata->disable_lock); platform_set_drvdata(pdev, ddata); + input_set_drvdata(input, ddata); input->name = pdev->name; input->phys = "gpio-keys/input0"; input->dev.parent = &pdev->dev; + input->open = gpio_keys_open; + input->close = gpio_keys_close; input->id.bustype = BUS_HOST; input->id.vendor = 0x0001; diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index c83f4b2..ddd5afd 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -232,15 +232,16 @@ static void hil_dev_handle_ptr_events(struct hil_dev *ptr) if (absdev) { val = lo + (hi << 8); #ifdef TABLET_AUTOADJUST - if (val < dev->absmin[ABS_X + i]) - dev->absmin[ABS_X + i] = val; - if (val > dev->absmax[ABS_X + i]) - dev->absmax[ABS_X + i] = val; + if (val < input_abs_min(dev, ABS_X + i)) + input_abs_set_min(dev, ABS_X + i, val); + if (val > input_abs_max(dev, ABS_X + i)) + XXinput_abs_set_max(dev, ABS_X + i, val); #endif - if (i%3) val = dev->absmax[ABS_X + i] - val; + if (i % 3) + val = input_abs_max(dev, ABS_X + i) - val; input_report_abs(dev, ABS_X + i, val); } else { - val = (int) (((int8_t)lo) | ((int8_t)hi << 8)); + val = (int) (((int8_t) lo) | ((int8_t) hi << 8)); if (i % 3) val *= -1; input_report_rel(dev, REL_X + i, val); @@ -387,9 +388,11 @@ static void hil_dev_pointer_setup(struct hil_dev *ptr) #ifdef TABLET_AUTOADJUST for (i = 0; i < ABS_MAX; i++) { - int diff = input_dev->absmax[ABS_X + i] / 10; - input_dev->absmin[ABS_X + i] += diff; - input_dev->absmax[ABS_X + i] -= diff; + int diff = input_abs_max(input_dev, ABS_X + i) / 10; + input_abs_set_min(input_dev, ABS_X + i, + input_abs_min(input_dev, ABS_X + i) + diff) + XXinput_abs_set_max(input_dev, ABS_X + i, + input_abs_max(input_dev, ABS_X + i) - diff) } #endif diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c index e2ca017..de5900d 100644 --- a/drivers/input/misc/adxl34x.c +++ b/drivers/input/misc/adxl34x.c @@ -724,7 +724,6 @@ struct adxl34x *adxl34x_probe(struct device *dev, int irq, pdata = &ac->pdata; ac->input = input_dev; - ac->disabled = true; ac->dev = dev; ac->irq = irq; ac->bops = bops; diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index b71eb55..bb53fd33 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -304,21 +304,25 @@ static int uinput_validate_absbits(struct input_dev *dev) if (!test_bit(cnt, dev->absbit)) continue; - if ((dev->absmax[cnt] <= dev->absmin[cnt])) { + if (input_abs_get_max(dev, cnt) <= input_abs_get_min(dev, cnt)) { printk(KERN_DEBUG "%s: invalid abs[%02x] min:%d max:%d\n", UINPUT_NAME, cnt, - dev->absmin[cnt], dev->absmax[cnt]); + input_abs_get_min(dev, cnt), + input_abs_get_max(dev, cnt)); retval = -EINVAL; break; } - if (dev->absflat[cnt] > (dev->absmax[cnt] - dev->absmin[cnt])) { + if (input_abs_get_flat(dev, cnt) > + input_abs_get_max(dev, cnt) - input_abs_get_min(dev, cnt)) { printk(KERN_DEBUG - "%s: absflat[%02x] out of range: %d " + "%s: abs_flat #%02x out of range: %d " "(min:%d/max:%d)\n", - UINPUT_NAME, cnt, dev->absflat[cnt], - dev->absmin[cnt], dev->absmax[cnt]); + UINPUT_NAME, cnt, + input_abs_get_flat(dev, cnt), + input_abs_get_min(dev, cnt), + input_abs_get_max(dev, cnt)); retval = -EINVAL; break; } @@ -343,7 +347,7 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu struct uinput_user_dev *user_dev; struct input_dev *dev; char *name; - int size; + int i, size; int retval; if (count != sizeof(struct uinput_user_dev)) @@ -387,11 +391,12 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu dev->id.product = user_dev->id.product; dev->id.version = user_dev->id.version; - size = sizeof(int) * ABS_CNT; - memcpy(dev->absmax, user_dev->absmax, size); - memcpy(dev->absmin, user_dev->absmin, size); - memcpy(dev->absfuzz, user_dev->absfuzz, size); - memcpy(dev->absflat, user_dev->absflat, size); + for (i = 0; i < ABS_CNT; i++) { + input_abs_set_max(dev, i, user_dev->absmax[i]); + input_abs_set_min(dev, i, user_dev->absmin[i]); + input_abs_set_fuzz(dev, i, user_dev->absfuzz[i]); + input_abs_set_flat(dev, i, user_dev->absflat[i]); + } /* check if absmin/absmax/absfuzz/absflat are filled as * told in Documentation/input/input-programming.txt */ diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 05edd75..a9cf768 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -205,8 +205,8 @@ struct atp { bool overflow_warned; int x_old; /* last reported x/y, */ int y_old; /* used for smoothing */ - u8 xy_cur[ATP_XSENSORS + ATP_YSENSORS]; - u8 xy_old[ATP_XSENSORS + ATP_YSENSORS]; + signed char xy_cur[ATP_XSENSORS + ATP_YSENSORS]; + signed char xy_old[ATP_XSENSORS + ATP_YSENSORS]; int xy_acc[ATP_XSENSORS + ATP_YSENSORS]; int idlecount; /* number of empty packets */ struct work_struct work; @@ -531,7 +531,7 @@ static void atp_complete_geyser_1_2(struct urb *urb) for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) { /* accumulate the change */ - int change = dev->xy_old[i] - dev->xy_cur[i]; + signed char change = dev->xy_old[i] - dev->xy_cur[i]; dev->xy_acc[i] -= change; /* prevent down drifting */ diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index b18862b..4831120 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -185,7 +185,6 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) struct elantech_data *etd = psmouse->private; unsigned char *packet = psmouse->packet; int fingers; - static int old_fingers; if (etd->fw_version < 0x020000) { /* @@ -203,10 +202,13 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) } if (etd->jumpy_cursor) { - /* Discard packets that are likely to have bogus coordinates */ - if (fingers > old_fingers) { + if (fingers != 1) { + etd->single_finger_reports = 0; + } else if (etd->single_finger_reports < 2) { + /* Discard first 2 reports of one finger, bogus */ + etd->single_finger_reports++; elantech_debug("discarding packet\n"); - goto discard_packet_v1; + return; } } @@ -238,9 +240,6 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) } input_sync(dev); - - discard_packet_v1: - old_fingers = fingers; } /* @@ -258,6 +257,14 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) input_report_key(dev, BTN_TOUCH, fingers != 0); switch (fingers) { + case 3: + /* + * Same as one finger, except report of more than 3 fingers: + * byte 3: n4 . w1 w0 . . . . + */ + if (packet[3] & 0x80) + fingers = 4; + /* pass through... */ case 1: /* * byte 1: . . . . . x10 x9 x8 @@ -310,6 +317,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); + input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4); input_report_key(dev, BTN_LEFT, packet[0] & 0x01); input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); @@ -467,6 +475,7 @@ static void elantech_set_input_params(struct psmouse *psmouse) break; case 2: + __set_bit(BTN_TOOL_QUADTAP, dev->keybit); input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0); input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0); input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0); @@ -733,13 +742,13 @@ int elantech_init(struct psmouse *psmouse) etd->capabilities = param[0]; /* - * This firmware seems to suffer from misreporting coordinates when + * This firmware suffers from misreporting coordinates when * a touch action starts causing the mouse cursor or scrolled page * to jump. Enable a workaround. */ - if (etd->fw_version == 0x020022) { - pr_info("firmware version 2.0.34 detected, enabling jumpy cursor workaround\n"); - etd->jumpy_cursor = 1; + if (etd->fw_version == 0x020022 || etd->fw_version == 0x020600) { + pr_info("firmware version 2.0.34/2.6.0 detected, enabling jumpy cursor workaround\n"); + etd->jumpy_cursor = true; } if (elantech_set_absolute_mode(psmouse)) { diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index ac57bde..aa4aac5 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -100,10 +100,11 @@ struct elantech_data { unsigned char reg_26; unsigned char debug; unsigned char capabilities; - unsigned char paritycheck; - unsigned char jumpy_cursor; + bool paritycheck; + bool jumpy_cursor; unsigned char hw_version; - unsigned int fw_version; + unsigned int fw_version; + unsigned int single_finger_reports; unsigned char parity[256]; }; diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c index 3941f97..7b02b65 100644 --- a/drivers/input/mouse/pc110pad.c +++ b/drivers/input/mouse/pc110pad.c @@ -145,8 +145,8 @@ static int __init pc110pad_init(void) pc110pad_dev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y); pc110pad_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - pc110pad_dev->absmax[ABS_X] = 0x1ff; - pc110pad_dev->absmax[ABS_Y] = 0x0ff; + input_abs_set_max(pc110pad_dev, ABS_X, 0x1ff); + input_abs_set_max(pc110pad_dev, ABS_Y, 0x0ff); pc110pad_dev->open = pc110pad_open; pc110pad_dev->close = pc110pad_close; diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 8c32440..96b70a4 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -635,8 +635,8 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) __clear_bit(REL_X, dev->relbit); __clear_bit(REL_Y, dev->relbit); - dev->absres[ABS_X] = priv->x_res; - dev->absres[ABS_Y] = priv->y_res; + input_abs_set_res(dev, ABS_X, priv->x_res); + input_abs_set_res(dev, ABS_Y, priv->y_res); if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) { /* Clickpads report only left button */ diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index d8f68f7..83c24cc 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -22,6 +22,7 @@ #include <linux/random.h> #include <linux/major.h> #include <linux/device.h> +#include <linux/kernel.h> #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX #include <linux/miscdevice.h> #endif @@ -134,11 +135,14 @@ static void mousedev_touchpad_event(struct input_dev *dev, switch (code) { case ABS_X: + fx(0) = value; if (mousedev->touch && mousedev->pkt_count >= 2) { - size = dev->absmax[ABS_X] - dev->absmin[ABS_X]; + size = input_abs_get_min(dev, ABS_X) - + input_abs_get_max(dev, ABS_X); if (size == 0) size = 256 * 2; + tmp = ((value - fx(2)) * 256 * FRACTION_DENOM) / size; tmp += mousedev->frac_dx; mousedev->packet.dx = tmp / FRACTION_DENOM; @@ -150,10 +154,12 @@ static void mousedev_touchpad_event(struct input_dev *dev, case ABS_Y: fy(0) = value; if (mousedev->touch && mousedev->pkt_count >= 2) { - /* use X size to keep the same scale */ - size = dev->absmax[ABS_X] - dev->absmin[ABS_X]; + /* use X size for ABS_Y to keep the same scale */ + size = input_abs_get_min(dev, ABS_X) - + input_abs_get_max(dev, ABS_X); if (size == 0) size = 256 * 2; + tmp = -((value - fy(2)) * 256 * FRACTION_DENOM) / size; tmp += mousedev->frac_dy; mousedev->packet.dy = tmp / FRACTION_DENOM; @@ -167,33 +173,35 @@ static void mousedev_touchpad_event(struct input_dev *dev, static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev, unsigned int code, int value) { - int size; + int min, max, size; switch (code) { case ABS_X: - size = dev->absmax[ABS_X] - dev->absmin[ABS_X]; + min = input_abs_get_min(dev, ABS_X); + max = input_abs_get_max(dev, ABS_X); + + size = max - min; if (size == 0) size = xres ? : 1; - if (value > dev->absmax[ABS_X]) - value = dev->absmax[ABS_X]; - if (value < dev->absmin[ABS_X]) - value = dev->absmin[ABS_X]; - mousedev->packet.x = - ((value - dev->absmin[ABS_X]) * xres) / size; + + clamp(value, min, max); + + mousedev->packet.x = ((value - min) * xres) / size; mousedev->packet.abs_event = 1; break; case ABS_Y: - size = dev->absmax[ABS_Y] - dev->absmin[ABS_Y]; + min = input_abs_get_min(dev, ABS_Y); + max = input_abs_get_max(dev, ABS_Y); + + size = max - min; if (size == 0) size = yres ? : 1; - if (value > dev->absmax[ABS_Y]) - value = dev->absmax[ABS_Y]; - if (value < dev->absmin[ABS_Y]) - value = dev->absmin[ABS_Y]; - mousedev->packet.y = yres - - ((value - dev->absmin[ABS_Y]) * yres) / size; + + clamp(value, min, max); + + mousedev->packet.y = yres - ((value - min) * yres) / size; mousedev->packet.abs_event = 1; break; } diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index 51b80b0..57b25b8 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -987,20 +987,17 @@ static int aiptek_program_tablet(struct aiptek *aiptek) /* Query getXextension */ if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0) return ret; - aiptek->inputdev->absmin[ABS_X] = 0; - aiptek->inputdev->absmax[ABS_X] = ret - 1; + input_set_abs_params(aiptek->inputdev, ABS_X, 0, ret - 1, 0, 0); /* Query getYextension */ if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0) return ret; - aiptek->inputdev->absmin[ABS_Y] = 0; - aiptek->inputdev->absmax[ABS_Y] = ret - 1; + input_set_abs_params(aiptek->inputdev, ABS_Y, 0, ret - 1, 0, 0); /* Query getPressureLevels */ if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0) return ret; - aiptek->inputdev->absmin[ABS_PRESSURE] = 0; - aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1; + input_set_abs_params(aiptek->inputdev, ABS_PRESSURE, 0, ret - 1, 0, 0); /* Depending on whether we are in absolute or relative mode, we will * do a switchToTablet(absolute) or switchToMouse(relative) command. @@ -1054,8 +1051,8 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr struct aiptek *aiptek = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%dx%d\n", - aiptek->inputdev->absmax[ABS_X] + 1, - aiptek->inputdev->absmax[ABS_Y] + 1); + input_abs_get_max(aiptek->inputdev, ABS_X) + 1, + input_abs_get_max(aiptek->inputdev, ABS_Y) + 1); } /* These structs define the sysfs files, param #1 is the name of the @@ -1843,7 +1840,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) for (i = 0; i < ARRAY_SIZE(speeds); ++i) { aiptek->curSetting.programmableDelay = speeds[i]; (void)aiptek_program_tablet(aiptek); - if (aiptek->inputdev->absmax[ABS_X] > 0) { + if (input_abs_get_max(aiptek->inputdev, ABS_X) > 0) { dev_info(&intf->dev, "Aiptek using %d ms programming speed\n", aiptek->curSetting.programmableDelay); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index ce0b460..40d77ba 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -687,10 +687,10 @@ static void wacom_tpc_finger_in(struct wacom_wac *wacom, char *data, int idx) * protocol. */ if (wacom->last_finger != finger) { - if (x == input->abs[ABS_X]) + if (x == input_abs_get_val(input, ABS_X)) x++; - if (y == input->abs[ABS_Y]) + if (y == input_abs_get_val(input, ABS_Y)) y++; } diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c index 4eb7df0..5ec0946 100644 --- a/drivers/input/touchscreen/cy8ctmg110_ts.c +++ b/drivers/input/touchscreen/cy8ctmg110_ts.c @@ -75,7 +75,7 @@ static int cy8ctmg110_write_regs(struct cy8ctmg110 *tsc, unsigned char reg, unsigned char len, unsigned char *value) { struct i2c_client *client = tsc->client; - unsigned int ret; + int ret; unsigned char i2c_data[6]; BUG_ON(len > 5); @@ -86,7 +86,7 @@ static int cy8ctmg110_write_regs(struct cy8ctmg110 *tsc, unsigned char reg, ret = i2c_master_send(client, i2c_data, len + 1); if (ret != 1) { dev_err(&client->dev, "i2c write data cmd failed\n"); - return ret; + return ret ? ret : -EIO; } return 0; @@ -96,7 +96,7 @@ static int cy8ctmg110_read_regs(struct cy8ctmg110 *tsc, unsigned char *data, unsigned char len, unsigned char cmd) { struct i2c_client *client = tsc->client; - unsigned int ret; + int ret; struct i2c_msg msg[2] = { /* first write slave position to i2c devices */ { client->addr, 0, 1, &cmd }, diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c index 0ded364..707d9c9 100644 --- a/drivers/isdn/gigaset/bas-gigaset.c +++ b/drivers/isdn/gigaset/bas-gigaset.c @@ -1914,11 +1914,13 @@ static int gigaset_write_cmd(struct cardstate *cs, struct cmdbuf_t *cb) * The next command will reopen the AT channel automatically. */ if (cb->len == 3 && !memcmp(cb->buf, "+++", 3)) { - kfree(cb); rc = req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT); if (cb->wake_tasklet) tasklet_schedule(cb->wake_tasklet); - return rc < 0 ? rc : cb->len; + if (!rc) + rc = cb->len; + kfree(cb); + return rc; } spin_lock_irqsave(&cs->cmdlock, flags); diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c index e5ea344..bcc174e 100644 --- a/drivers/isdn/gigaset/capi.c +++ b/drivers/isdn/gigaset/capi.c @@ -1052,6 +1052,7 @@ static inline void remove_appl_from_channel(struct bc_state *bcs, do { if (bcap->bcnext == ap) { bcap->bcnext = bcap->bcnext->bcnext; + spin_unlock_irqrestore(&bcs->aplock, flags); return; } bcap = bcap->bcnext; diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c index 43c5dc35..4cfdbe0 100644 --- a/drivers/isdn/sc/ioctl.c +++ b/drivers/isdn/sc/ioctl.c @@ -174,7 +174,7 @@ int sc_ioctl(int card, scs_ioctl *data) pr_debug("%s: SCIOGETSPID: ioctl received\n", sc_adapter[card]->devicename); - spid = kmalloc(SCIOC_SPIDSIZE, GFP_KERNEL); + spid = kzalloc(SCIOC_SPIDSIZE, GFP_KERNEL); if (!spid) { kfree(rcvmsg); return -ENOMEM; @@ -194,7 +194,7 @@ int sc_ioctl(int card, scs_ioctl *data) kfree(rcvmsg); return status; } - strcpy(spid, rcvmsg->msg_data.byte_array); + strlcpy(spid, rcvmsg->msg_data.byte_array, SCIOC_SPIDSIZE); /* * Package the switch type and send to user space @@ -266,12 +266,12 @@ int sc_ioctl(int card, scs_ioctl *data) return status; } - dn = kmalloc(SCIOC_DNSIZE, GFP_KERNEL); + dn = kzalloc(SCIOC_DNSIZE, GFP_KERNEL); if (!dn) { kfree(rcvmsg); return -ENOMEM; } - strcpy(dn, rcvmsg->msg_data.byte_array); + strlcpy(dn, rcvmsg->msg_data.byte_array, SCIOC_DNSIZE); kfree(rcvmsg); /* @@ -337,7 +337,7 @@ int sc_ioctl(int card, scs_ioctl *data) pr_debug("%s: SCIOSTAT: ioctl received\n", sc_adapter[card]->devicename); - bi = kmalloc (sizeof(boardInfo), GFP_KERNEL); + bi = kzalloc(sizeof(boardInfo), GFP_KERNEL); if (!bi) { kfree(rcvmsg); return -ENOMEM; diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 21ffd03..cb77197 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -25,6 +25,7 @@ #include <linux/init.h> #include <linux/kmod.h> #include <linux/slab.h> +#include <linux/smp_lock.h> #include <asm/uaccess.h> #include <asm/system.h> @@ -215,28 +216,24 @@ static unsigned int v4l2_poll(struct file *filp, struct poll_table_struct *poll) return vdev->fops->poll(filp, poll); } -static int v4l2_ioctl(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +static long v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct video_device *vdev = video_devdata(filp); + int ret; - if (!vdev->fops->ioctl) - return -ENOTTY; /* Allow ioctl to continue even if the device was unregistered. Things like dequeueing buffers might still be useful. */ - return vdev->fops->ioctl(filp, cmd, arg); -} - -static long v4l2_unlocked_ioctl(struct file *filp, - unsigned int cmd, unsigned long arg) -{ - struct video_device *vdev = video_devdata(filp); + if (vdev->fops->unlocked_ioctl) { + ret = vdev->fops->unlocked_ioctl(filp, cmd, arg); + } else if (vdev->fops->ioctl) { + /* TODO: convert all drivers to unlocked_ioctl */ + lock_kernel(); + ret = vdev->fops->ioctl(filp, cmd, arg); + unlock_kernel(); + } else + ret = -ENOTTY; - if (!vdev->fops->unlocked_ioctl) - return -ENOTTY; - /* Allow ioctl to continue even if the device was unregistered. - Things like dequeueing buffers might still be useful. */ - return vdev->fops->unlocked_ioctl(filp, cmd, arg); + return ret; } #ifdef CONFIG_MMU @@ -307,22 +304,6 @@ static int v4l2_release(struct inode *inode, struct file *filp) return ret; } -static const struct file_operations v4l2_unlocked_fops = { - .owner = THIS_MODULE, - .read = v4l2_read, - .write = v4l2_write, - .open = v4l2_open, - .get_unmapped_area = v4l2_get_unmapped_area, - .mmap = v4l2_mmap, - .unlocked_ioctl = v4l2_unlocked_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = v4l2_compat_ioctl32, -#endif - .release = v4l2_release, - .poll = v4l2_poll, - .llseek = no_llseek, -}; - static const struct file_operations v4l2_fops = { .owner = THIS_MODULE, .read = v4l2_read, @@ -330,7 +311,7 @@ static const struct file_operations v4l2_fops = { .open = v4l2_open, .get_unmapped_area = v4l2_get_unmapped_area, .mmap = v4l2_mmap, - .ioctl = v4l2_ioctl, + .unlocked_ioctl = v4l2_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = v4l2_compat_ioctl32, #endif @@ -525,10 +506,7 @@ static int __video_register_device(struct video_device *vdev, int type, int nr, ret = -ENOMEM; goto cleanup; } - if (vdev->fops->unlocked_ioctl) - vdev->cdev->ops = &v4l2_unlocked_fops; - else - vdev->cdev->ops = &v4l2_fops; + vdev->cdev->ops = &v4l2_fops; vdev->cdev->owner = vdev->fops->owner; ret = cdev_add(vdev->cdev, MKDEV(VIDEO_MAJOR, vdev->minor), 1); if (ret < 0) { diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 488f254..0b591b6 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -304,6 +304,23 @@ config SENSORS_TSL2550 This driver can also be built as a module. If so, the module will be called tsl2550. +config SENSORS_BH1780 + tristate "ROHM BH1780GLI ambient light sensor" + depends on I2C && SYSFS + help + If you say yes here you get support for the ROHM BH1780GLI + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called bh1780gli. + +config HMC6352 + tristate "Honeywell HMC6352 compass" + depends on I2C + help + This driver provides support for the Honeywell HMC6352 compass, + providing configuration and heading data via sysfs. + config EP93XX_PWM tristate "EP93xx PWM support" depends on ARCH_EP93XX @@ -363,6 +380,16 @@ config ARM_CHARLCD line and the Linux version on the second line, but that's still useful. +config BMP085 + tristate "BMP085 digital pressure sensor" + depends on I2C && SYSFS + help + If you say yes here you get support for the Bosch Sensortec + BMP086 digital pressure sensor. + + To compile this driver as a module, choose M here: the + module will be called bmp085. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 67552d6..255a80d 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -9,11 +9,13 @@ obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o +obj-$(CONFIG_BMP085) += bmp085.o obj-$(CONFIG_ICS932S401) += ics932s401.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o +obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o obj-$(CONFIG_SGI_IOC4) += ioc4.o obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o obj-$(CONFIG_KGDB_TESTS) += kgdbts.o @@ -28,6 +30,7 @@ obj-$(CONFIG_DS1682) += ds1682.o obj-$(CONFIG_TI_DAC7512) += ti_dac7512.o obj-$(CONFIG_C2PORT) += c2port/ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/ +obj-$(CONFIG_HMC6352) += hmc6352.o obj-y += eeprom/ obj-y += cb710/ obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c new file mode 100644 index 0000000..714c6b4 --- /dev/null +++ b/drivers/misc/bh1780gli.c @@ -0,0 +1,273 @@ +/* + * bh1780gli.c + * ROHM Ambient Light Sensor Driver + * + * Copyright (C) 2010 Texas Instruments + * Author: Hemanth V <hemanthv@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/delay.h> + +#define BH1780_REG_CONTROL 0x80 +#define BH1780_REG_PARTID 0x8A +#define BH1780_REG_MANFID 0x8B +#define BH1780_REG_DLOW 0x8C +#define BH1780_REG_DHIGH 0x8D + +#define BH1780_REVMASK (0xf) +#define BH1780_POWMASK (0x3) +#define BH1780_POFF (0x0) +#define BH1780_PON (0x3) + +/* power on settling time in ms */ +#define BH1780_PON_DELAY 2 + +struct bh1780_data { + struct i2c_client *client; + int power_state; + /* lock for sysfs operations */ + struct mutex lock; +}; + +static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg) +{ + int ret = i2c_smbus_write_byte_data(ddata->client, reg, val); + if (ret < 0) + dev_err(&ddata->client->dev, + "i2c_smbus_write_byte_data failed error %d\ + Register (%s)\n", ret, msg); + return ret; +} + +static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg) +{ + int ret = i2c_smbus_read_byte_data(ddata->client, reg); + if (ret < 0) + dev_err(&ddata->client->dev, + "i2c_smbus_read_byte_data failed error %d\ + Register (%s)\n", ret, msg); + return ret; +} + +static ssize_t bh1780_show_lux(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct bh1780_data *ddata = platform_get_drvdata(pdev); + int lsb, msb; + + lsb = bh1780_read(ddata, BH1780_REG_DLOW, "DLOW"); + if (lsb < 0) + return lsb; + + msb = bh1780_read(ddata, BH1780_REG_DHIGH, "DHIGH"); + if (msb < 0) + return msb; + + return sprintf(buf, "%d\n", (msb << 8) | lsb); +} + +static ssize_t bh1780_show_power_state(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct bh1780_data *ddata = platform_get_drvdata(pdev); + int state; + + state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL"); + if (state < 0) + return state; + + return sprintf(buf, "%d\n", state & BH1780_POWMASK); +} + +static ssize_t bh1780_store_power_state(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct bh1780_data *ddata = platform_get_drvdata(pdev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 0, &val); + if (error) + return error; + + if (val < BH1780_POFF || val > BH1780_PON) + return -EINVAL; + + mutex_lock(&ddata->lock); + + error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL"); + if (error < 0) { + mutex_unlock(&ddata->lock); + return error; + } + + msleep(BH1780_PON_DELAY); + ddata->power_state = val; + mutex_unlock(&ddata->lock); + + return count; +} + +static DEVICE_ATTR(lux, S_IRUGO, bh1780_show_lux, NULL); + +static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO, + bh1780_show_power_state, bh1780_store_power_state); + +static struct attribute *bh1780_attributes[] = { + &dev_attr_power_state.attr, + &dev_attr_lux.attr, + NULL +}; + +static const struct attribute_group bh1780_attr_group = { + .attrs = bh1780_attributes, +}; + +static int __devinit bh1780_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct bh1780_data *ddata = NULL; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) { + ret = -EIO; + goto err_op_failed; + } + + ddata = kzalloc(sizeof(struct bh1780_data), GFP_KERNEL); + if (ddata == NULL) { + ret = -ENOMEM; + goto err_op_failed; + } + + ddata->client = client; + i2c_set_clientdata(client, ddata); + + ret = bh1780_read(ddata, BH1780_REG_PARTID, "PART ID"); + if (ret < 0) + goto err_op_failed; + + dev_info(&client->dev, "Ambient Light Sensor, Rev : %d\n", + (ret & BH1780_REVMASK)); + + mutex_init(&ddata->lock); + + ret = sysfs_create_group(&client->dev.kobj, &bh1780_attr_group); + if (ret) + goto err_op_failed; + + return 0; + +err_op_failed: + kfree(ddata); + return ret; +} + +static int __devexit bh1780_remove(struct i2c_client *client) +{ + struct bh1780_data *ddata; + + ddata = i2c_get_clientdata(client); + sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group); + i2c_set_clientdata(client, NULL); + kfree(ddata); + + return 0; +} + +#ifdef CONFIG_PM +static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct bh1780_data *ddata; + int state, ret; + + ddata = i2c_get_clientdata(client); + state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL"); + if (state < 0) + return state; + + ddata->power_state = state & BH1780_POWMASK; + + ret = bh1780_write(ddata, BH1780_REG_CONTROL, BH1780_POFF, + "CONTROL"); + + if (ret < 0) + return ret; + + return 0; +} + +static int bh1780_resume(struct i2c_client *client) +{ + struct bh1780_data *ddata; + int state, ret; + + ddata = i2c_get_clientdata(client); + state = ddata->power_state; + + ret = bh1780_write(ddata, BH1780_REG_CONTROL, state, + "CONTROL"); + + if (ret < 0) + return ret; + + return 0; +} +#else +#define bh1780_suspend NULL +#define bh1780_resume NULL +#endif /* CONFIG_PM */ + +static const struct i2c_device_id bh1780_id[] = { + { "bh1780", 0 }, + { }, +}; + +static struct i2c_driver bh1780_driver = { + .probe = bh1780_probe, + .remove = bh1780_remove, + .id_table = bh1780_id, + .suspend = bh1780_suspend, + .resume = bh1780_resume, + .driver = { + .name = "bh1780" + }, +}; + +static int __init bh1780_init(void) +{ + return i2c_add_driver(&bh1780_driver); +} + +static void __exit bh1780_exit(void) +{ + i2c_del_driver(&bh1780_driver); +} + +module_init(bh1780_init) +module_exit(bh1780_exit) + +MODULE_DESCRIPTION("BH1780GLI Ambient Light Sensor Driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>"); diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c new file mode 100644 index 0000000..63ee4c1 --- /dev/null +++ b/drivers/misc/bmp085.c @@ -0,0 +1,482 @@ +/* Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com> + + This driver supports the bmp085 digital barometric pressure + and temperature sensor from Bosch Sensortec. The datasheet + is avaliable from their website: + http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf + + A pressure measurement is issued by reading from pressure0_input. + The return value ranges from 30000 to 110000 pascal with a resulution + of 1 pascal (0.01 millibar) which enables measurements from 9000m above + to 500m below sea level. + + The temperature can be read from temp0_input. Values range from + -400 to 850 representing the ambient temperature in degree celsius + multiplied by 10.The resolution is 0.1 celsius. + + Because ambient pressure is temperature dependent, a temperature + measurement will be executed automatically even if the user is reading + from pressure0_input. This happens if the last temperature measurement + has been executed more then one second ago. + + To decrease RMS noise from pressure measurements, the bmp085 can + autonomously calculate the average of up to eight samples. This is + set up by writing to the oversampling sysfs file. Accepted values + are 0, 1, 2 and 3. 2^x when x is the value written to this file + specifies the number of samples used to calculate the ambient pressure. + RMS noise is specified with six pascal (without averaging) and decreases + down to 3 pascal when using an oversampling setting of 3. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/delay.h> + + +#define BMP085_I2C_ADDRESS 0x77 +#define BMP085_CHIP_ID 0x55 + +#define BMP085_CALIBRATION_DATA_START 0xAA +#define BMP085_CALIBRATION_DATA_LENGTH 11 /* 16 bit values */ +#define BMP085_CHIP_ID_REG 0xD0 +#define BMP085_VERSION_REG 0xD1 +#define BMP085_CTRL_REG 0xF4 +#define BMP085_TEMP_MEASUREMENT 0x2E +#define BMP085_PRESSURE_MEASUREMENT 0x34 +#define BMP085_CONVERSION_REGISTER_MSB 0xF6 +#define BMP085_CONVERSION_REGISTER_LSB 0xF7 +#define BMP085_CONVERSION_REGISTER_XLSB 0xF8 +#define BMP085_TEMP_CONVERSION_TIME 5 + +#define BMP085_CLIENT_NAME "bmp085" + + +static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS, + I2C_CLIENT_END }; + +struct bmp085_calibration_data { + s16 AC1, AC2, AC3; + u16 AC4, AC5, AC6; + s16 B1, B2; + s16 MB, MC, MD; +}; + + +/* Each client has this additional data */ +struct bmp085_data { + struct i2c_client *client; + struct mutex lock; + struct bmp085_calibration_data calibration; + u32 raw_temperature; + u32 raw_pressure; + unsigned char oversampling_setting; + u32 last_temp_measurement; + s32 b6; /* calculated temperature correction coefficient */ +}; + + +static s32 bmp085_read_calibration_data(struct i2c_client *client) +{ + u16 tmp[BMP085_CALIBRATION_DATA_LENGTH]; + struct bmp085_data *data = i2c_get_clientdata(client); + struct bmp085_calibration_data *cali = &(data->calibration); + s32 status = i2c_smbus_read_i2c_block_data(client, + BMP085_CALIBRATION_DATA_START, + BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16), + (u8 *)tmp); + if (status < 0) + return status; + + if (status != BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16)) + return -EIO; + + cali->AC1 = be16_to_cpu(tmp[0]); + cali->AC2 = be16_to_cpu(tmp[1]); + cali->AC3 = be16_to_cpu(tmp[2]); + cali->AC4 = be16_to_cpu(tmp[3]); + cali->AC5 = be16_to_cpu(tmp[4]); + cali->AC6 = be16_to_cpu(tmp[5]); + cali->B1 = be16_to_cpu(tmp[6]); + cali->B2 = be16_to_cpu(tmp[7]); + cali->MB = be16_to_cpu(tmp[8]); + cali->MC = be16_to_cpu(tmp[9]); + cali->MD = be16_to_cpu(tmp[10]); + return 0; +} + + +static s32 bmp085_update_raw_temperature(struct bmp085_data *data) +{ + u16 tmp; + s32 status; + + mutex_lock(&data->lock); + status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG, + BMP085_TEMP_MEASUREMENT); + if (status != 0) { + dev_err(&data->client->dev, + "Error while requesting temperature measurement.\n"); + goto exit; + } + msleep(BMP085_TEMP_CONVERSION_TIME); + + status = i2c_smbus_read_i2c_block_data(data->client, + BMP085_CONVERSION_REGISTER_MSB, sizeof(tmp), (u8 *)&tmp); + if (status < 0) + goto exit; + if (status != sizeof(tmp)) { + dev_err(&data->client->dev, + "Error while reading temperature measurement result\n"); + status = -EIO; + goto exit; + } + data->raw_temperature = be16_to_cpu(tmp); + data->last_temp_measurement = jiffies; + status = 0; /* everything ok, return 0 */ + +exit: + mutex_unlock(&data->lock); + return status; +} + +static s32 bmp085_update_raw_pressure(struct bmp085_data *data) +{ + u32 tmp = 0; + s32 status; + + mutex_lock(&data->lock); + status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG, + BMP085_PRESSURE_MEASUREMENT + (data->oversampling_setting<<6)); + if (status != 0) { + dev_err(&data->client->dev, + "Error while requesting pressure measurement.\n"); + goto exit; + } + + /* wait for the end of conversion */ + msleep(2+(3 << data->oversampling_setting)); + + /* copy data into a u32 (4 bytes), but skip the first byte. */ + status = i2c_smbus_read_i2c_block_data(data->client, + BMP085_CONVERSION_REGISTER_MSB, 3, ((u8 *)&tmp)+1); + if (status < 0) + goto exit; + if (status != 3) { + dev_err(&data->client->dev, + "Error while reading pressure measurement results\n"); + status = -EIO; + goto exit; + } + data->raw_pressure = be32_to_cpu((tmp)); + data->raw_pressure >>= (8-data->oversampling_setting); + status = 0; /* everything ok, return 0 */ + +exit: + mutex_unlock(&data->lock); + return status; +} + + +/* + * This function starts the temperature measurement and returns the value + * in tenth of a degree celsius. + */ +static s32 bmp085_get_temperature(struct bmp085_data *data, int *temperature) +{ + struct bmp085_calibration_data *cali = &data->calibration; + long x1, x2; + int status; + + status = bmp085_update_raw_temperature(data); + if (status != 0) + goto exit; + + x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15; + x2 = (cali->MC << 11) / (x1 + cali->MD); + data->b6 = x1 + x2 - 4000; + /* if NULL just update b6. Used for pressure only measurements */ + if (temperature != NULL) + *temperature = (x1+x2+8) >> 4; + +exit: + return status;; +} + +/* + * This function starts the pressure measurement and returns the value + * in millibar. Since the pressure depends on the ambient temperature, + * a temperature measurement is executed if the last known value is older + * than one second. + */ +static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure) +{ + struct bmp085_calibration_data *cali = &data->calibration; + s32 x1, x2, x3, b3; + u32 b4, b7; + s32 p; + int status; + + /* alt least every second force an update of the ambient temperature */ + if (data->last_temp_measurement + 1*HZ < jiffies) { + status = bmp085_get_temperature(data, NULL); + if (status != 0) + goto exit; + } + + status = bmp085_update_raw_pressure(data); + if (status != 0) + goto exit; + + x1 = (data->b6 * data->b6) >> 12; + x1 *= cali->B2; + x1 >>= 11; + + x2 = cali->AC2 * data->b6; + x2 >>= 11; + + x3 = x1 + x2; + + b3 = (((((s32)cali->AC1) * 4 + x3) << data->oversampling_setting) + 2); + b3 >>= 2; + + x1 = (cali->AC3 * data->b6) >> 13; + x2 = (cali->B1 * ((data->b6 * data->b6) >> 12)) >> 16; + x3 = (x1 + x2 + 2) >> 2; + b4 = (cali->AC4 * (u32)(x3 + 32768)) >> 15; + + b7 = ((u32)data->raw_pressure - b3) * + (50000 >> data->oversampling_setting); + p = ((b7 < 0x80000000) ? ((b7 << 1) / b4) : ((b7 / b4) * 2)); + + x1 = p >> 8; + x1 *= x1; + x1 = (x1 * 3038) >> 16; + x2 = (-7357 * p) >> 16; + p += (x1 + x2 + 3791) >> 4; + + *pressure = p; + +exit: + return status; +} + +/* + * This function sets the chip-internal oversampling. Valid values are 0..3. + * The chip will use 2^oversampling samples for internal averaging. + * This influences the measurement time and the accuracy; larger values + * increase both. The datasheet gives on overview on how measurement time, + * accuracy and noise correlate. + */ +static void bmp085_set_oversampling(struct bmp085_data *data, + unsigned char oversampling) +{ + if (oversampling > 3) + oversampling = 3; + data->oversampling_setting = oversampling; +} + +/* + * Returns the currently selected oversampling. Range: 0..3 + */ +static unsigned char bmp085_get_oversampling(struct bmp085_data *data) +{ + return data->oversampling_setting; +} + +/* sysfs callbacks */ +static ssize_t set_oversampling(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bmp085_data *data = i2c_get_clientdata(client); + unsigned long oversampling; + int success = strict_strtoul(buf, 10, &oversampling); + if (success == 0) { + bmp085_set_oversampling(data, oversampling); + return count; + } + return success; +} + +static ssize_t show_oversampling(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bmp085_data *data = i2c_get_clientdata(client); + return sprintf(buf, "%u\n", bmp085_get_oversampling(data)); +} +static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO, + show_oversampling, set_oversampling); + + +static ssize_t show_temperature(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int temperature; + int status; + struct i2c_client *client = to_i2c_client(dev); + struct bmp085_data *data = i2c_get_clientdata(client); + + status = bmp085_get_temperature(data, &temperature); + if (status != 0) + return status; + else + return sprintf(buf, "%d\n", temperature); +} +static DEVICE_ATTR(temp0_input, S_IRUGO, show_temperature, NULL); + + +static ssize_t show_pressure(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int pressure; + int status; + struct i2c_client *client = to_i2c_client(dev); + struct bmp085_data *data = i2c_get_clientdata(client); + + status = bmp085_get_pressure(data, &pressure); + if (status != 0) + return status; + else + return sprintf(buf, "%d\n", pressure); +} +static DEVICE_ATTR(pressure0_input, S_IRUGO, show_pressure, NULL); + + +static struct attribute *bmp085_attributes[] = { + &dev_attr_temp0_input.attr, + &dev_attr_pressure0_input.attr, + &dev_attr_oversampling.attr, + NULL +}; + +static const struct attribute_group bmp085_attr_group = { + .attrs = bmp085_attributes, +}; + +static int bmp085_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + if (client->addr != BMP085_I2C_ADDRESS) + return -ENODEV; + + if (i2c_smbus_read_byte_data(client, BMP085_CHIP_ID_REG) != BMP085_CHIP_ID) + return -ENODEV; + + return 0; +} + +static int bmp085_init_client(struct i2c_client *client) +{ + unsigned char version; + int status; + struct bmp085_data *data = i2c_get_clientdata(client); + data->client = client; + status = bmp085_read_calibration_data(client); + if (status != 0) + goto exit; + version = i2c_smbus_read_byte_data(client, BMP085_VERSION_REG); + data->last_temp_measurement = 0; + data->oversampling_setting = 3; + mutex_init(&data->lock); + dev_info(&data->client->dev, "BMP085 ver. %d.%d found.\n", + (version & 0x0F), (version & 0xF0) >> 4); +exit: + return status; +} + +static int bmp085_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bmp085_data *data; + int err = 0; + + data = kzalloc(sizeof(struct bmp085_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + /* default settings after POR */ + data->oversampling_setting = 0x00; + + i2c_set_clientdata(client, data); + + /* Initialize the BMP085 chip */ + err = bmp085_init_client(client); + if (err != 0) + goto exit_free; + + /* Register sysfs hooks */ + err = sysfs_create_group(&client->dev.kobj, &bmp085_attr_group); + if (err) + goto exit_free; + + dev_info(&data->client->dev, "Succesfully initialized bmp085!\n"); + goto exit; + +exit_free: + kfree(data); +exit: + return err; +} + +static int bmp085_remove(struct i2c_client *client) +{ + sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group); + kfree(i2c_get_clientdata(client)); + return 0; +} + +static const struct i2c_device_id bmp085_id[] = { + { "bmp085", 0 }, + { } +}; + +static struct i2c_driver bmp085_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "bmp085" + }, + .id_table = bmp085_id, + .probe = bmp085_probe, + .remove = bmp085_remove, + + .detect = bmp085_detect, + .address_list = normal_i2c +}; + +static int __init bmp085_init(void) +{ + return i2c_add_driver(&bmp085_driver); +} + +static void __exit bmp085_exit(void) +{ + i2c_del_driver(&bmp085_driver); +} + + +MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com"); +MODULE_DESCRIPTION("BMP085 driver"); +MODULE_LICENSE("GPL"); + +module_init(bmp085_init); +module_exit(bmp085_exit); diff --git a/drivers/misc/hmc6352.c b/drivers/misc/hmc6352.c new file mode 100644 index 0000000..234bfca --- /dev/null +++ b/drivers/misc/hmc6352.c @@ -0,0 +1,166 @@ +/* + * hmc6352.c - Honeywell Compass Driver + * + * Copyright (C) 2009 Intel Corp + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/sysfs.h> + +static DEFINE_MUTEX(compass_mutex); + +static int compass_command(struct i2c_client *c, u8 cmd) +{ + int ret = i2c_master_send(c, &cmd, 1); + if (ret < 0) + dev_warn(&c->dev, "command '%c' failed.\n", cmd); + return ret; +} + +static int compass_store(struct device *dev, const char *buf, size_t count, + const char *map) +{ + struct i2c_client *c = to_i2c_client(dev); + int ret; + unsigned long val; + + if (strict_strtoul(buf, 10, &val)) + return -EINVAL; + if (val >= strlen(map)) + return -EINVAL; + mutex_lock(&compass_mutex); + ret = compass_command(c, map[val]); + mutex_unlock(&compass_mutex); + if (ret < 0) + return ret; + return count; +} + +static ssize_t compass_calibration_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return compass_store(dev, buf, count, "EC"); +} + +static ssize_t compass_power_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return compass_store(dev, buf, count, "SW"); +} + +static ssize_t compass_heading_data_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char i2c_data[2]; + unsigned int ret; + + mutex_lock(&compass_mutex); + ret = compass_command(client, 'A'); + if (ret != 1) { + mutex_unlock(&compass_mutex); + return ret; + } + msleep(10); /* sending 'A' cmd we need to wait for 7-10 millisecs */ + ret = i2c_master_recv(client, i2c_data, 2); + mutex_unlock(&compass_mutex); + if (ret != 1) { + dev_warn(dev, "i2c read data cmd failed\n"); + return ret; + } + ret = (i2c_data[0] << 8) | i2c_data[1]; + return sprintf(buf, "%d.%d\n", ret/10, ret%10); +} + + +static DEVICE_ATTR(heading0_input, S_IRUGO, compass_heading_data_show, NULL); +static DEVICE_ATTR(calibration, S_IWUSR, NULL, compass_calibration_store); +static DEVICE_ATTR(power_state, S_IWUSR, NULL, compass_power_mode_store); + +static struct attribute *mid_att_compass[] = { + &dev_attr_heading0_input.attr, + &dev_attr_calibration.attr, + &dev_attr_power_state.attr, + NULL +}; + +static const struct attribute_group m_compass_gr = { + .name = "hmc6352", + .attrs = mid_att_compass +}; + +static int hmc6352_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int res; + + res = sysfs_create_group(&client->dev.kobj, &m_compass_gr); + if (res) { + dev_err(&client->dev, "device_create_file failed\n"); + return res; + } + dev_info(&client->dev, "%s HMC6352 compass chip found\n", + client->name); + return 0; +} + +static int hmc6352_remove(struct i2c_client *client) +{ + sysfs_remove_group(&client->dev.kobj, &m_compass_gr); + return 0; +} + +static struct i2c_device_id hmc6352_id[] = { + { "hmc6352", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, hmc6352_id); + +static struct i2c_driver hmc6352_driver = { + .driver = { + .name = "hmc6352", + }, + .probe = hmc6352_probe, + .remove = hmc6352_remove, + .id_table = hmc6352_id, +}; + +static int __init sensor_hmc6352_init(void) +{ + return i2c_add_driver(&hmc6352_driver); +} + +static void __exit sensor_hmc6352_exit(void) +{ + i2c_del_driver(&hmc6352_driver); +} + +module_init(sensor_hmc6352_init); +module_exit(sensor_hmc6352_exit); + +MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com"); +MODULE_DESCRIPTION("hmc6352 Compass Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 98ad012..557a8c2 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data) static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot) { - char *dma_va, *dma_pa; + char *dma_va; + dma_addr_t dma_pa; struct ccb *driver_ccb, *ilo_ccb; driver_ccb = &data->driver_ccb; @@ -272,12 +273,12 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot) return -ENOMEM; dma_va = (char *)data->dma_va; - dma_pa = (char *)data->dma_pa; + dma_pa = data->dma_pa; memset(dma_va, 0, data->dma_size); dma_va = (char *)roundup((unsigned long)dma_va, ILO_START_ALIGN); - dma_pa = (char *)roundup((unsigned long)dma_pa, ILO_START_ALIGN); + dma_pa = roundup(dma_pa, ILO_START_ALIGN); /* * Create two ccb's, one with virt addrs, one with phys addrs. @@ -288,26 +289,26 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot) fifo_setup(dma_va, NR_QENTRY); driver_ccb->ccb_u1.send_fifobar = dma_va + FIFOHANDLESIZE; - ilo_ccb->ccb_u1.send_fifobar = dma_pa + FIFOHANDLESIZE; + ilo_ccb->ccb_u1.send_fifobar_pa = dma_pa + FIFOHANDLESIZE; dma_va += fifo_sz(NR_QENTRY); dma_pa += fifo_sz(NR_QENTRY); dma_va = (char *)roundup((unsigned long)dma_va, ILO_CACHE_SZ); - dma_pa = (char *)roundup((unsigned long)dma_pa, ILO_CACHE_SZ); + dma_pa = roundup(dma_pa, ILO_CACHE_SZ); fifo_setup(dma_va, NR_QENTRY); driver_ccb->ccb_u3.recv_fifobar = dma_va + FIFOHANDLESIZE; - ilo_ccb->ccb_u3.recv_fifobar = dma_pa + FIFOHANDLESIZE; + ilo_ccb->ccb_u3.recv_fifobar_pa = dma_pa + FIFOHANDLESIZE; dma_va += fifo_sz(NR_QENTRY); dma_pa += fifo_sz(NR_QENTRY); driver_ccb->ccb_u2.send_desc = dma_va; - ilo_ccb->ccb_u2.send_desc = dma_pa; + ilo_ccb->ccb_u2.send_desc_pa = dma_pa; dma_pa += desc_mem_sz(NR_QENTRY); dma_va += desc_mem_sz(NR_QENTRY); driver_ccb->ccb_u4.recv_desc = dma_va; - ilo_ccb->ccb_u4.recv_desc = dma_pa; + ilo_ccb->ccb_u4.recv_desc_pa = dma_pa; driver_ccb->channel = slot; ilo_ccb->channel = slot; diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h index 247eb38..54e43adb 100644 --- a/drivers/misc/hpilo.h +++ b/drivers/misc/hpilo.h @@ -79,21 +79,21 @@ struct ilo_hwinfo { struct ccb { union { char *send_fifobar; - u64 padding1; + u64 send_fifobar_pa; } ccb_u1; union { char *send_desc; - u64 padding2; + u64 send_desc_pa; } ccb_u2; u64 send_ctrl; union { char *recv_fifobar; - u64 padding3; + u64 recv_fifobar_pa; } ccb_u3; union { char *recv_desc; - u64 padding4; + u64 recv_desc_pa; } ccb_u4; u64 recv_ctrl; diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index f8210bf..1e2cbf5 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -311,15 +311,17 @@ config SM_FTL select MTD_BLKDEVS select MTD_NAND_ECC help - This enables new and very EXPERMENTAL support for SmartMedia/xD + This enables EXPERIMENTAL R/W support for SmartMedia/xD FTL (Flash translation layer). - Write support isn't yet well tested, therefore this code IS likely to - eat your card, so please don't use it together with valuable data. - Use readonly driver (CONFIG_SSFDC) instead. + Write support is only lightly tested, therefore this driver + isn't recommended to use with valuable data (anyway if you have + valuable data, do backups regardless of software/hardware you + use, because you never know what will eat your data...) + If you only need R/O access, you can use older R/O driver + (CONFIG_SSFDC) config MTD_OOPS tristate "Log panic/oops to an MTD buffer" - depends on MTD help This enables panic and oops messages to be logged to a circular buffer in a flash partition where it can be read back at some diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c index cec7ab9..302372c 100644 --- a/drivers/mtd/afs.c +++ b/drivers/mtd/afs.c @@ -2,7 +2,7 @@ drivers/mtd/afs.c: ARM Flash Layout/Partitioning - Copyright (C) 2000 ARM Limited + Copyright © 2000 ARM Limited This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 62f3ea9..9e2b7e9 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -34,7 +34,6 @@ #include <linux/mtd/xip.h> #include <linux/mtd/map.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/compatmac.h> #include <linux/mtd/cfi.h> /* #define CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE */ @@ -63,6 +62,8 @@ static int cfi_intelext_erase_varsize(struct mtd_info *, struct erase_info *); static void cfi_intelext_sync (struct mtd_info *); static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs, + uint64_t len); #ifdef CONFIG_MTD_OTP static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); @@ -448,6 +449,7 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary) mtd->sync = cfi_intelext_sync; mtd->lock = cfi_intelext_lock; mtd->unlock = cfi_intelext_unlock; + mtd->is_locked = cfi_intelext_is_locked; mtd->suspend = cfi_intelext_suspend; mtd->resume = cfi_intelext_resume; mtd->flags = MTD_CAP_NORFLASH; @@ -717,7 +719,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd, chip = &newcfi->chips[0]; for (i = 0; i < cfi->numchips; i++) { shared[i].writing = shared[i].erasing = NULL; - spin_lock_init(&shared[i].lock); + mutex_init(&shared[i].lock); for (j = 0; j < numparts; j++) { *chip = cfi->chips[i]; chip->start += j << partshift; @@ -886,7 +888,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr */ struct flchip_shared *shared = chip->priv; struct flchip *contender; - spin_lock(&shared->lock); + mutex_lock(&shared->lock); contender = shared->writing; if (contender && contender != chip) { /* @@ -899,7 +901,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr * get_chip returns success we're clear to go ahead. */ ret = mutex_trylock(&contender->mutex); - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); if (!ret) goto retry; mutex_unlock(&chip->mutex); @@ -914,7 +916,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr mutex_unlock(&contender->mutex); return ret; } - spin_lock(&shared->lock); + mutex_lock(&shared->lock); /* We should not own chip if it is already * in FL_SYNCING state. Put contender and retry. */ @@ -930,7 +932,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr * on this chip. Sleep. */ if (mode == FL_ERASING && shared->erasing && shared->erasing->oldstate == FL_ERASING) { - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&chip->wq, &wait); mutex_unlock(&chip->mutex); @@ -944,7 +946,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr shared->writing = chip; if (mode == FL_ERASING) shared->erasing = chip; - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); } ret = chip_ready(map, chip, adr, mode); if (ret == -EAGAIN) @@ -959,7 +961,7 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad if (chip->priv) { struct flchip_shared *shared = chip->priv; - spin_lock(&shared->lock); + mutex_lock(&shared->lock); if (shared->writing == chip && chip->oldstate == FL_READY) { /* We own the ability to write, but we're done */ shared->writing = shared->erasing; @@ -967,7 +969,7 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad /* give back ownership to who we loaned it from */ struct flchip *loaner = shared->writing; mutex_lock(&loaner->mutex); - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); mutex_unlock(&chip->mutex); put_chip(map, loaner, loaner->start); mutex_lock(&chip->mutex); @@ -985,11 +987,11 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad * Don't let the switch below mess things up since * we don't have ownership to resume anything. */ - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); wake_up(&chip->wq); return; } - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); } switch(chip->oldstate) { @@ -2139,6 +2141,13 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) return ret; } +static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs, + uint64_t len) +{ + return cfi_varsize_frob(mtd, do_getlockstatus_oneblock, + ofs, len, NULL) ? 1 : 0; +} + #ifdef CONFIG_MTD_OTP typedef int (*otp_op_t)(struct map_info *map, struct flchip *chip, diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index d81079e..3e6c47b 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -33,7 +33,6 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/reboot.h> -#include <linux/mtd/compatmac.h> #include <linux/mtd/map.h> #include <linux/mtd/mtd.h> #include <linux/mtd/cfi.h> @@ -417,16 +416,26 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) */ cfi_fixup_major_minor(cfi, extp); + /* + * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4 + * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 + * http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf + * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf + */ if (extp->MajorVersion != '1' || - (extp->MinorVersion < '0' || extp->MinorVersion > '4')) { + (extp->MajorVersion == '1' && (extp->MinorVersion < '0' || extp->MinorVersion > '4'))) { printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query " - "version %c.%c.\n", extp->MajorVersion, - extp->MinorVersion); + "version %c.%c (%#02x/%#02x).\n", + extp->MajorVersion, extp->MinorVersion, + extp->MajorVersion, extp->MinorVersion); kfree(extp); kfree(mtd); return NULL; } + printk(KERN_INFO " Amd/Fujitsu Extended Query version %c.%c.\n", + extp->MajorVersion, extp->MinorVersion); + /* Install our own private info structure */ cfi->cmdset_priv = extp; diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c index e54e8c1..314af1f 100644 --- a/drivers/mtd/chips/cfi_cmdset_0020.c +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -33,7 +33,6 @@ #include <linux/mtd/map.h> #include <linux/mtd/cfi.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/compatmac.h> static int cfi_staa_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c index b2acd32f..8f5b96a 100644 --- a/drivers/mtd/chips/cfi_probe.c +++ b/drivers/mtd/chips/cfi_probe.c @@ -235,9 +235,9 @@ static int __xipram cfi_chip_setup(struct map_info *map, cfi_qry_mode_off(base, map, cfi); xip_allowed(base, map); - printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n", + printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n", map->name, cfi->interleave, cfi->device_type*8, base, - map->bankwidth*8); + map->bankwidth*8, cfi->mfr, cfi->id); return 1; } diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index d7c2c67..e503b2c 100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -22,7 +22,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> #include <linux/mtd/cfi.h> -#include <linux/mtd/compatmac.h> int __xipram cfi_qry_present(struct map_info *map, __u32 base, struct cfi_private *cfi) diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c index c857609..da1f96f 100644 --- a/drivers/mtd/chips/chipreg.c +++ b/drivers/mtd/chips/chipreg.c @@ -10,7 +10,6 @@ #include <linux/slab.h> #include <linux/mtd/map.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/compatmac.h> static DEFINE_SPINLOCK(chip_drvs_lock); static LIST_HEAD(chip_drvs_list); diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c index 494d30d..f2b8729 100644 --- a/drivers/mtd/chips/map_absent.c +++ b/drivers/mtd/chips/map_absent.c @@ -25,7 +25,6 @@ #include <linux/init.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> -#include <linux/mtd/compatmac.h> static int map_absent_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int map_absent_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *); diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c index 6bdc50c..67640cc 100644 --- a/drivers/mtd/chips/map_ram.c +++ b/drivers/mtd/chips/map_ram.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> -#include <linux/mtd/compatmac.h> static int mapram_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c index 076090a..593f73d 100644 --- a/drivers/mtd/chips/map_rom.c +++ b/drivers/mtd/chips/map_rom.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> -#include <linux/mtd/compatmac.h> static int maprom_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *); diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index 1479da6..e790f38 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c @@ -1,7 +1,22 @@ /* * Read flash partition table from command line * - * Copyright 2002 SYSGO Real-Time Solutions GmbH + * Copyright © 2002 SYSGO Real-Time Solutions GmbH + * Copyright © 2002-2010 David Woodhouse <dwmw2@infradead.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * * The format for the command line is as follows: * diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c index a19cda5..a99838b 100644 --- a/drivers/mtd/devices/docecc.c +++ b/drivers/mtd/devices/docecc.c @@ -31,7 +31,6 @@ #include <linux/init.h> #include <linux/types.h> -#include <linux/mtd/compatmac.h> /* for min() in older kernels */ #include <linux/mtd/mtd.h> #include <linux/mtd/doc2000.h> diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c index 6e62922..d374603 100644 --- a/drivers/mtd/devices/docprobe.c +++ b/drivers/mtd/devices/docprobe.c @@ -49,7 +49,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/doc2000.h> -#include <linux/mtd/compatmac.h> /* Where to look for the devices? */ #ifndef CONFIG_MTD_DOCPROBE_ADDRESS diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 81e49a9..f90941a 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -16,6 +16,8 @@ */ #include <linux/init.h> +#include <linux/err.h> +#include <linux/errno.h> #include <linux/module.h> #include <linux/device.h> #include <linux/interrupt.h> @@ -639,8 +641,18 @@ static const struct spi_device_id m25p_ids[] = { { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) }, { "at26df321", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) }, + /* EON -- en25pxx */ + { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) }, + { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, + + /* Intel/Numonyx -- xxxs33b */ + { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, + { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) }, + { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) }, + /* Macronix */ { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) }, + { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) }, { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) }, { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) }, { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, @@ -680,6 +692,16 @@ static const struct spi_device_id m25p_ids[] = { { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) }, { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) }, + { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) }, + { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) }, + { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) }, + { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) }, + { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) }, + { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) }, + { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) }, + { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) }, + { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) }, + { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) }, { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) }, { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) }, @@ -694,6 +716,7 @@ static const struct spi_device_id m25p_ids[] = { { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) }, { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, + { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, /* Catalyst / On Semiconductor -- non-JEDEC */ @@ -723,7 +746,7 @@ static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi) if (tmp < 0) { DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n", dev_name(&spi->dev), tmp); - return NULL; + return ERR_PTR(tmp); } jedec = id[0]; jedec = jedec << 8; @@ -731,14 +754,6 @@ static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi) jedec = jedec << 8; jedec |= id[2]; - /* - * Some chips (like Numonyx M25P80) have JEDEC and non-JEDEC variants, - * which depend on technology process. Officially RDID command doesn't - * exist for non-JEDEC chips, but for compatibility they return ID 0. - */ - if (jedec == 0) - return NULL; - ext_jedec = id[3] << 8 | id[4]; for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) { @@ -749,7 +764,7 @@ static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi) return &m25p_ids[tmp]; } } - return NULL; + return ERR_PTR(-ENODEV); } @@ -794,9 +809,8 @@ static int __devinit m25p_probe(struct spi_device *spi) const struct spi_device_id *jid; jid = jedec_probe(spi); - if (!jid) { - dev_info(&spi->dev, "non-JEDEC variant of %s\n", - id->name); + if (IS_ERR(jid)) { + return PTR_ERR(jid); } else if (jid != id) { /* * JEDEC knows better, so overwrite platform ID. We @@ -826,11 +840,12 @@ static int __devinit m25p_probe(struct spi_device *spi) dev_set_drvdata(&spi->dev, flash); /* - * Atmel and SST serial flash tend to power + * Atmel, SST and Intel/Numonyx serial flash tend to power * up with the software protection bits set */ if (info->jedec_id >> 16 == 0x1f || + info->jedec_id >> 16 == 0x89 || info->jedec_id >> 16 == 0xbf) { write_enable(flash); write_sr(flash, 0); diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 1981740..c5015cc 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -141,7 +141,7 @@ static int dataflash_waitready(struct spi_device *spi) */ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) { - struct dataflash *priv = (struct dataflash *)mtd->priv; + struct dataflash *priv = mtd->priv; struct spi_device *spi = priv->spi; struct spi_transfer x = { .tx_dma = 0, }; struct spi_message msg; @@ -231,7 +231,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { - struct dataflash *priv = (struct dataflash *)mtd->priv; + struct dataflash *priv = mtd->priv; struct spi_transfer x[2] = { { .tx_dma = 0, }, }; struct spi_message msg; unsigned int addr; @@ -304,7 +304,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) { - struct dataflash *priv = (struct dataflash *)mtd->priv; + struct dataflash *priv = mtd->priv; struct spi_device *spi = priv->spi; struct spi_transfer x[2] = { { .tx_dma = 0, }, }; struct spi_message msg; @@ -515,7 +515,7 @@ static ssize_t otp_read(struct spi_device *spi, unsigned base, static int dataflash_read_fact_otp(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { - struct dataflash *priv = (struct dataflash *)mtd->priv; + struct dataflash *priv = mtd->priv; int status; /* 64 bytes, from 0..63 ... start at 64 on-chip */ @@ -532,7 +532,7 @@ static int dataflash_read_fact_otp(struct mtd_info *mtd, static int dataflash_read_user_otp(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { - struct dataflash *priv = (struct dataflash *)mtd->priv; + struct dataflash *priv = mtd->priv; int status; /* 64 bytes, from 0..63 ... start at 0 on-chip */ @@ -553,7 +553,7 @@ static int dataflash_write_user_otp(struct mtd_info *mtd, const size_t l = 4 + 64; uint8_t *scratch; struct spi_transfer t; - struct dataflash *priv = (struct dataflash *)mtd->priv; + struct dataflash *priv = mtd->priv; int status; if (len > 64) diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index fce5ff7..26a6e80 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c @@ -14,7 +14,6 @@ #include <linux/ioport.h> #include <linux/vmalloc.h> #include <linux/init.h> -#include <linux/mtd/compatmac.h> #include <linux/mtd/mtd.h> #include <linux/mtd/mtdram.h> diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index fc8ea0a..ef0aba0 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -98,7 +98,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/pmc551.h> -#include <linux/mtd/compatmac.h> static struct mtd_info *pmc551list; diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index ab5d8cd02..684247a 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -454,7 +454,7 @@ static int __init sst25l_probe(struct spi_device *spi) parts, nr_parts); } - } else if (data->nr_parts) { + } else if (data && data->nr_parts) { dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", data->nr_parts, data->name); } diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c index 62da9eb..4d6a64c 100644 --- a/drivers/mtd/ftl.c +++ b/drivers/mtd/ftl.c @@ -26,7 +26,7 @@ The initial developer of the original code is David A. Hinds <dahinds@users.sourceforge.net>. Portions created by David A. Hinds - are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + are Copyright © 1999 David A. Hinds. All Rights Reserved. Alternatively, the contents of this file may be used under the terms of the GNU General Public License version 2 (the "GPL"), in diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 015a7fe..d7592e6 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -1,11 +1,11 @@ /* * inftlcore.c -- Linux driver for Inverse Flash Translation Layer (INFTL) * - * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) + * Copyright © 2002, Greg Ungerer (gerg@snapgear.com) * * Based heavily on the nftlcore.c code which is: - * (c) 1999 Machine Vision Holdings, Inc. - * Author: David Woodhouse <dwmw2@infradead.org> + * Copyright © 1999 Machine Vision Holdings, Inc. + * Copyright © 1999 David Woodhouse <dwmw2@infradead.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c index 8f988d7..104052e 100644 --- a/drivers/mtd/inftlmount.c +++ b/drivers/mtd/inftlmount.c @@ -2,11 +2,11 @@ * inftlmount.c -- INFTL mount code with extensive checks. * * Author: Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2002-2003, Greg Ungerer (gerg@snapgear.com) + * Copyright © 2002-2003, Greg Ungerer (gerg@snapgear.com) * * Based heavily on the nftlmount.c code which is: * Author: Fabrice Bellard (fabrice.bellard@netgem.com) - * Copyright (C) 2000 Netgem S.A. + * Copyright © 2000 Netgem S.A. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -34,7 +34,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nftl.h> #include <linux/mtd/inftl.h> -#include <linux/mtd/compatmac.h> /* * find_boot_record: Find the INFTL Media Header and its Spare copy which diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c index fece5be..04fdfcc 100644 --- a/drivers/mtd/lpddr/lpddr_cmds.c +++ b/drivers/mtd/lpddr/lpddr_cmds.c @@ -98,7 +98,7 @@ struct mtd_info *lpddr_cmdset(struct map_info *map) numchips = lpddr->numchips / lpddr->qinfo->HWPartsNum; for (i = 0; i < numchips; i++) { shared[i].writing = shared[i].erasing = NULL; - spin_lock_init(&shared[i].lock); + mutex_init(&shared[i].lock); for (j = 0; j < lpddr->qinfo->HWPartsNum; j++) { *chip = lpddr->chips[i]; chip->start += j << lpddr->chipshift; @@ -217,7 +217,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode) */ struct flchip_shared *shared = chip->priv; struct flchip *contender; - spin_lock(&shared->lock); + mutex_lock(&shared->lock); contender = shared->writing; if (contender && contender != chip) { /* @@ -230,7 +230,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode) * get_chip returns success we're clear to go ahead. */ ret = mutex_trylock(&contender->mutex); - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); if (!ret) goto retry; mutex_unlock(&chip->mutex); @@ -245,7 +245,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode) mutex_unlock(&contender->mutex); return ret; } - spin_lock(&shared->lock); + mutex_lock(&shared->lock); /* We should not own chip if it is already in FL_SYNCING * state. Put contender and retry. */ @@ -261,7 +261,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode) Must sleep in such a case. */ if (mode == FL_ERASING && shared->erasing && shared->erasing->oldstate == FL_ERASING) { - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&chip->wq, &wait); mutex_unlock(&chip->mutex); @@ -275,7 +275,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode) shared->writing = chip; if (mode == FL_ERASING) shared->erasing = chip; - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); } ret = chip_ready(map, chip, mode); @@ -348,7 +348,7 @@ static void put_chip(struct map_info *map, struct flchip *chip) { if (chip->priv) { struct flchip_shared *shared = chip->priv; - spin_lock(&shared->lock); + mutex_lock(&shared->lock); if (shared->writing == chip && chip->oldstate == FL_READY) { /* We own the ability to write, but we're done */ shared->writing = shared->erasing; @@ -356,7 +356,7 @@ static void put_chip(struct map_info *map, struct flchip *chip) /* give back the ownership */ struct flchip *loaner = shared->writing; mutex_lock(&loaner->mutex); - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); mutex_unlock(&chip->mutex); put_chip(map, loaner); mutex_lock(&chip->mutex); @@ -374,11 +374,11 @@ static void put_chip(struct map_info *map, struct flchip *chip) * Don't let the switch below mess things up since * we don't have ownership to resume anything. */ - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); wake_up(&chip->wq); return; } - spin_unlock(&shared->lock); + mutex_unlock(&shared->lock); } switch (chip->oldstate) { diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 6629d09..701d942 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -319,14 +319,6 @@ config MTD_CFI_FLAGADM Mapping for the Flaga digital module. If you don't have one, ignore this setting. -config MTD_REDWOOD - tristate "CFI Flash devices mapped on IBM Redwood" - depends on MTD_CFI - help - This enables access routines for the flash chips on the IBM - Redwood board. If you have one of these boards and would like to - use the flash chips on it, say 'Y'. - config MTD_SOLUTIONENGINE tristate "CFI Flash device mapped on Hitachi SolutionEngine" depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index bb035cd..f216bb5 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -44,7 +44,6 @@ obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o obj-$(CONFIG_MTD_EDB7312) += edb7312.o obj-$(CONFIG_MTD_IMPA7) += impa7.o obj-$(CONFIG_MTD_FORTUNET) += fortunet.o -obj-$(CONFIG_MTD_REDWOOD) += redwood.o obj-$(CONFIG_MTD_UCLINUX) += uclinux.o obj-$(CONFIG_MTD_NETtel) += nettel.o obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index e0a5e04..1f9fde0 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -118,7 +118,7 @@ static void ixp4xx_copy_from(struct map_info *map, void *to, *dest++ = BYTE1(data); src += 2; len -= 2; - } + } if (len > 0) *dest++ = BYTE0(flash_read16(src)); @@ -185,6 +185,8 @@ static int ixp4xx_flash_probe(struct platform_device *dev) { struct flash_platform_data *plat = dev->dev.platform_data; struct ixp4xx_flash_info *info; + const char *part_type = NULL; + int nr_parts = 0; int err = -1; if (!plat) @@ -218,9 +220,9 @@ static int ixp4xx_flash_probe(struct platform_device *dev) */ info->map.bankwidth = 2; info->map.name = dev_name(&dev->dev); - info->map.read = ixp4xx_read16, - info->map.write = ixp4xx_probe_write16, - info->map.copy_from = ixp4xx_copy_from, + info->map.read = ixp4xx_read16; + info->map.write = ixp4xx_probe_write16; + info->map.copy_from = ixp4xx_copy_from; info->res = request_mem_region(dev->resource->start, resource_size(dev->resource), @@ -248,11 +250,28 @@ static int ixp4xx_flash_probe(struct platform_device *dev) info->mtd->owner = THIS_MODULE; /* Use the fast version */ - info->map.write = ixp4xx_write16, + info->map.write = ixp4xx_write16; + +#ifdef CONFIG_MTD_PARTITIONS + nr_parts = parse_mtd_partitions(info->mtd, probes, &info->partitions, + dev->resource->start); +#endif + if (nr_parts > 0) { + part_type = "dynamic"; + } else { + info->partitions = plat->parts; + nr_parts = plat->nr_parts; + part_type = "static"; + } + if (nr_parts == 0) { + printk(KERN_NOTICE "IXP4xx flash: no partition info " + "available, registering whole flash\n"); + err = add_mtd_device(info->mtd); + } else { + printk(KERN_NOTICE "IXP4xx flash: using %s partition " + "definition\n", part_type); + err = add_mtd_partitions(info->mtd, info->partitions, nr_parts); - err = parse_mtd_partitions(info->mtd, probes, &info->partitions, dev->resource->start); - if (err > 0) { - err = add_mtd_partitions(info->mtd, info->partitions, err); if(err) printk(KERN_ERR "Could not parse partitions\n"); } diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 426461a..4c18b98 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -106,12 +106,12 @@ static int physmap_flash_probe(struct platform_device *dev) for (i = 0; i < dev->num_resources; i++) { printk(KERN_NOTICE "physmap platform flash device: %.8llx at %.8llx\n", - (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1), + (unsigned long long)resource_size(&dev->resource[i]), (unsigned long long)dev->resource[i].start); if (!devm_request_mem_region(&dev->dev, dev->resource[i].start, - dev->resource[i].end - dev->resource[i].start + 1, + resource_size(&dev->resource[i]), dev_name(&dev->dev))) { dev_err(&dev->dev, "Could not reserve memory region\n"); err = -ENOMEM; @@ -120,7 +120,7 @@ static int physmap_flash_probe(struct platform_device *dev) info->map[i].name = dev_name(&dev->dev); info->map[i].phys = dev->resource[i].start; - info->map[i].size = dev->resource[i].end - dev->resource[i].start + 1; + info->map[i].size = resource_size(&dev->resource[i]); info->map[i].bankwidth = physmap_data->width; info->map[i].set_vpp = physmap_data->set_vpp; info->map[i].pfow_base = physmap_data->pfow_base; @@ -136,8 +136,12 @@ static int physmap_flash_probe(struct platform_device *dev) simple_map_init(&info->map[i]); probe_type = rom_probe_types; - for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++) - info->mtd[i] = do_map_probe(*probe_type, &info->map[i]); + if (physmap_data->probe_type == NULL) { + for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++) + info->mtd[i] = do_map_probe(*probe_type, &info->map[i]); + } else + info->mtd[i] = do_map_probe(physmap_data->probe_type, &info->map[i]); + if (info->mtd[i] == NULL) { dev_err(&dev->dev, "map_probe failed\n"); err = -ENXIO; diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index ba124ba..6ac5f9f 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -353,7 +353,7 @@ static int __devinit of_flash_probe(struct of_device *dev, &info->parts, 0); if (err < 0) { of_free_probes(part_probe_types); - return err; + goto err_out; } of_free_probes(part_probe_types); @@ -361,14 +361,14 @@ static int __devinit of_flash_probe(struct of_device *dev, if (err == 0) { err = of_mtd_parse_partitions(&dev->dev, dp, &info->parts); if (err < 0) - return err; + goto err_out; } #endif if (err == 0) { err = parse_obsolete_partitions(dev, info, dp); if (err < 0) - return err; + goto err_out; } if (err > 0) diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c deleted file mode 100644 index d2c9db0..0000000 --- a/drivers/mtd/maps/redwood.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * drivers/mtd/maps/redwood.c - * - * FLASH map for the IBM Redwood 4/5/6 boards. - * - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * 2001-2003 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> - -#define WINDOW_ADDR 0xffc00000 -#define WINDOW_SIZE 0x00400000 - -#define RW_PART0_OF 0 -#define RW_PART0_SZ 0x10000 -#define RW_PART1_OF RW_PART0_SZ -#define RW_PART1_SZ 0x200000 - 0x10000 -#define RW_PART2_OF 0x200000 -#define RW_PART2_SZ 0x10000 -#define RW_PART3_OF 0x210000 -#define RW_PART3_SZ 0x200000 - (0x10000 + 0x20000) -#define RW_PART4_OF 0x3e0000 -#define RW_PART4_SZ 0x20000 - -static struct mtd_partition redwood_flash_partitions[] = { - { - .name = "Redwood OpenBIOS Vital Product Data", - .offset = RW_PART0_OF, - .size = RW_PART0_SZ, - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, - { - .name = "Redwood kernel", - .offset = RW_PART1_OF, - .size = RW_PART1_SZ - }, - { - .name = "Redwood OpenBIOS non-volatile storage", - .offset = RW_PART2_OF, - .size = RW_PART2_SZ, - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, - { - .name = "Redwood filesystem", - .offset = RW_PART3_OF, - .size = RW_PART3_SZ - }, - { - .name = "Redwood OpenBIOS", - .offset = RW_PART4_OF, - .size = RW_PART4_SZ, - .mask_flags = MTD_WRITEABLE /* force read-only */ - } -}; - -struct map_info redwood_flash_map = { - .name = "IBM Redwood", - .size = WINDOW_SIZE, - .bankwidth = 2, - .phys = WINDOW_ADDR, -}; - - -#define NUM_REDWOOD_FLASH_PARTITIONS ARRAY_SIZE(redwood_flash_partitions) - -static struct mtd_info *redwood_mtd; - -static int __init init_redwood_flash(void) -{ - int err; - - printk(KERN_NOTICE "redwood: flash mapping: %x at %x\n", - WINDOW_SIZE, WINDOW_ADDR); - - redwood_flash_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE); - - if (!redwood_flash_map.virt) { - printk("init_redwood_flash: failed to ioremap\n"); - return -EIO; - } - simple_map_init(&redwood_flash_map); - - redwood_mtd = do_map_probe("cfi_probe",&redwood_flash_map); - - if (redwood_mtd) { - redwood_mtd->owner = THIS_MODULE; - err = add_mtd_partitions(redwood_mtd, - redwood_flash_partitions, - NUM_REDWOOD_FLASH_PARTITIONS); - if (err) { - printk("init_redwood_flash: add_mtd_partitions failed\n"); - iounmap(redwood_flash_map.virt); - } - return err; - - } - - iounmap(redwood_flash_map.virt); - return -ENXIO; -} - -static void __exit cleanup_redwood_flash(void) -{ - if (redwood_mtd) { - del_mtd_partitions(redwood_mtd); - /* moved iounmap after map_destroy - armin */ - map_destroy(redwood_mtd); - iounmap((void *)redwood_flash_map.virt); - } -} - -module_init(init_redwood_flash); -module_exit(cleanup_redwood_flash); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("MontaVista Software <source@mvista.com>"); -MODULE_DESCRIPTION("MTD map driver for the IBM Redwood reference boards"); diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 03e19c1..1d2144d 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -1,7 +1,21 @@ /* - * (C) 2003 David Woodhouse <dwmw2@infradead.org> + * Interface to Linux block layer for MTD 'translation layers'. * - * Interface to Linux 2.5 block layer for MTD 'translation layers'. + * Copyright © 2003-2010 David Woodhouse <dwmw2@infradead.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * */ @@ -245,6 +259,7 @@ static int blktrans_ioctl(struct block_device *bdev, fmode_t mode, switch (cmd) { case BLKFLSBUF: ret = dev->tr->flush ? dev->tr->flush(dev) : 0; + break; default: ret = -ENOTTY; } @@ -409,13 +424,14 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old) BUG(); } - /* Stop new requests to arrive */ - del_gendisk(old->disk); - if (old->disk_attributes) sysfs_remove_group(&disk_to_dev(old->disk)->kobj, old->disk_attributes); + /* Stop new requests to arrive */ + del_gendisk(old->disk); + + /* Stop the thread */ kthread_stop(old->thread); diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index e6edbec..1e74ad9 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -1,8 +1,23 @@ /* * Direct MTD block device access * - * (C) 2000-2003 Nicolas Pitre <nico@fluxnic.net> - * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> + * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> + * Copyright © 2000-2003 Nicolas Pitre <nico@fluxnic.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * */ #include <linux/fs.h> diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c index d0d3f79..795a8c0 100644 --- a/drivers/mtd/mtdblock_ro.c +++ b/drivers/mtd/mtdblock_ro.c @@ -1,7 +1,22 @@ /* - * (C) 2003 David Woodhouse <dwmw2@infradead.org> - * * Simple read-only (writable only for RAM) mtdblock driver + * + * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * */ #include <linux/init.h> diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 91c8013..a825002 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -1,5 +1,19 @@ /* - * Character-device access to raw MTD devices. + * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * */ @@ -18,7 +32,7 @@ #include <linux/mount.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/compatmac.h> +#include <linux/mtd/map.h> #include <asm/uaccess.h> @@ -675,6 +689,20 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg) break; } + case MEMISLOCKED: + { + struct erase_info_user einfo; + + if (copy_from_user(&einfo, argp, sizeof(einfo))) + return -EFAULT; + + if (!mtd->is_locked) + ret = -EOPNOTSUPP; + else + ret = mtd->is_locked(mtd, einfo.start, einfo.length); + break; + } + /* Legacy interface */ case MEMGETOOBSEL: { @@ -950,9 +978,34 @@ static int mtd_mmap(struct file *file, struct vm_area_struct *vma) #ifdef CONFIG_MMU struct mtd_file_info *mfi = file->private_data; struct mtd_info *mtd = mfi->mtd; + struct map_info *map = mtd->priv; + unsigned long start; + unsigned long off; + u32 len; + + if (mtd->type == MTD_RAM || mtd->type == MTD_ROM) { + off = vma->vm_pgoff << PAGE_SHIFT; + start = map->phys; + len = PAGE_ALIGN((start & ~PAGE_MASK) + map->size); + start &= PAGE_MASK; + if ((vma->vm_end - vma->vm_start + off) > len) + return -EINVAL; + + off += start; + vma->vm_pgoff = off >> PAGE_SHIFT; + vma->vm_flags |= VM_IO | VM_RESERVED; + +#ifdef pgprot_noncached + if (file->f_flags & O_DSYNC || off >= __pa(high_memory)) + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); +#endif + if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) + return -EAGAIN; - if (mtd->type == MTD_RAM || mtd->type == MTD_ROM) return 0; + } return -ENOSYS; #else return vma->vm_flags & VM_SHARED ? 0 : -ENOSYS; diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index 7e07562..bf8de09 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -1,11 +1,25 @@ /* * MTD device concatenation layer * - * (C) 2002 Robert Kaiser <rkaiser@sysgo.de> + * Copyright © 2002 Robert Kaiser <rkaiser@sysgo.de> + * Copyright © 2002-2010 David Woodhouse <dwmw2@infradead.org> * * NAND support by Christian Gan <cgan@iders.ca> * - * This code is GPL + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * */ #include <linux/kernel.h> @@ -540,10 +554,12 @@ static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) else size = len; - err = subdev->lock(subdev, ofs, size); - - if (err) - break; + if (subdev->lock) { + err = subdev->lock(subdev, ofs, size); + if (err) + break; + } else + err = -EOPNOTSUPP; len -= size; if (len == 0) @@ -578,10 +594,12 @@ static int concat_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) else size = len; - err = subdev->unlock(subdev, ofs, size); - - if (err) - break; + if (subdev->unlock) { + err = subdev->unlock(subdev, ofs, size); + if (err) + break; + } else + err = -EOPNOTSUPP; len -= size; if (len == 0) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index a1b8b70..527cebf 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -2,9 +2,23 @@ * Core registration and callback routines for MTD * drivers and users. * - * bdi bits are: - * Copyright © 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) + * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> + * Copyright © 2006 Red Hat UK Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * */ #include <linux/module.h> @@ -17,7 +31,6 @@ #include <linux/err.h> #include <linux/ioctl.h> #include <linux/init.h> -#include <linux/mtd/compatmac.h> #include <linux/proc_fs.h> #include <linux/idr.h> #include <linux/backing-dev.h> diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c index 328313c..1ee72f3 100644 --- a/drivers/mtd/mtdoops.c +++ b/drivers/mtd/mtdoops.c @@ -1,7 +1,7 @@ /* * MTD Oops/Panic logger * - * Copyright (C) 2007 Nokia Corporation. All rights reserved. + * Copyright © 2007 Nokia Corporation. All rights reserved. * * Author: Richard Purdie <rpurdie@openedhand.com> * diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index b8043a9..dc65585 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -1,12 +1,24 @@ /* * Simple MTD partitioning layer * - * (C) 2000 Nicolas Pitre <nico@fluxnic.net> + * Copyright © 2000 Nicolas Pitre <nico@fluxnic.net> + * Copyright © 2002 Thomas Gleixner <gleixner@linutronix.de> + * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> * - * This code is GPL + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * 02-21-2002 Thomas Gleixner <gleixner@autronix.de> - * added support for read_oob, write_oob */ #include <linux/module.h> @@ -17,7 +29,6 @@ #include <linux/kmod.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <linux/mtd/compatmac.h> /* Our partition linked list */ static LIST_HEAD(mtd_partitions); @@ -264,6 +275,14 @@ static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) return part->master->unlock(part->master, ofs + part->offset, len); } +static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + struct mtd_part *part = PART(mtd); + if ((len + ofs) > mtd->size) + return -EINVAL; + return part->master->is_locked(part->master, ofs + part->offset, len); +} + static void part_sync(struct mtd_info *mtd) { struct mtd_part *part = PART(mtd); @@ -402,6 +421,8 @@ static struct mtd_part *add_one_partition(struct mtd_info *master, slave->mtd.lock = part_lock; if (master->unlock) slave->mtd.unlock = part_unlock; + if (master->is_locked) + slave->mtd.is_locked = part_is_locked; if (master->block_isbad) slave->mtd.block_isbad = part_block_isbad; if (master->block_markbad) diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index bd9a443..38e2ab0 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -1,6 +1,8 @@ /* MTD-based superblock management * * Copyright © 2001-2007 Red Hat, Inc. All Rights Reserved. + * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org> + * * Written by: David Howells <dhowells@redhat.com> * David Woodhouse <dwmw2@infradead.org> * diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 362d177..8b4b67c 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -37,7 +37,6 @@ config MTD_SM_COMMON config MTD_NAND_MUSEUM_IDS bool "Enable chip ids for obsolete ancient NAND devices" - depends on MTD_NAND default n help Enable this option only when your board has first generation @@ -61,6 +60,7 @@ config MTD_NAND_DENALI config MTD_NAND_DENALI_SCRATCH_REG_ADDR hex "Denali NAND size scratch register address" default "0xFF108018" + depends on MTD_NAND_DENALI help Some platforms place the NAND chip size in a scratch register because (some versions of) the driver aren't able to automatically @@ -101,13 +101,13 @@ config MTD_NAND_AMS_DELTA config MTD_NAND_OMAP2 tristate "NAND Flash device on OMAP2 and OMAP3" - depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3) + depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3) help Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms. config MTD_NAND_OMAP_PREFETCH bool "GPMC prefetch support for NAND Flash device" - depends on MTD_NAND && MTD_NAND_OMAP2 + depends on MTD_NAND_OMAP2 default y help The NAND device can be accessed for Read/Write using GPMC PREFETCH engine @@ -146,7 +146,7 @@ config MTD_NAND_AU1550 config MTD_NAND_BF5XX tristate "Blackfin on-chip NAND Flash Controller driver" - depends on (BF54x || BF52x) && MTD_NAND + depends on BF54x || BF52x help This enables the Blackfin on-chip NAND flash controller @@ -236,7 +236,7 @@ config MTD_NAND_S3C2410_CLKSTOP config MTD_NAND_BCM_UMI tristate "NAND Flash support for BCM Reference Boards" - depends on ARCH_BCMRING && MTD_NAND + depends on ARCH_BCMRING help This enables the NAND flash controller on the BCM UMI block. @@ -395,7 +395,7 @@ endchoice config MTD_NAND_PXA3xx tristate "Support for NAND flash devices on PXA3xx" - depends on MTD_NAND && (PXA3xx || ARCH_MMP) + depends on PXA3xx || ARCH_MMP help This enables the driver for the NAND flash device found on PXA3xx processors @@ -409,18 +409,18 @@ config MTD_NAND_PXA3xx_BUILTIN config MTD_NAND_CM_X270 tristate "Support for NAND Flash on CM-X270 modules" - depends on MTD_NAND && MACH_ARMCORE + depends on MACH_ARMCORE config MTD_NAND_PASEMI tristate "NAND support for PA Semi PWRficient" - depends on MTD_NAND && PPC_PASEMI + depends on PPC_PASEMI help Enables support for NAND Flash interface on PA Semi PWRficient based boards config MTD_NAND_TMIO tristate "NAND Flash device on Toshiba Mobile IO Controller" - depends on MTD_NAND && MFD_TMIO + depends on MFD_TMIO help Support for NAND flash connected to a Toshiba Mobile IO Controller in some PDAs, including the Sharp SL6000x. @@ -434,7 +434,6 @@ config MTD_NAND_NANDSIM config MTD_NAND_PLATFORM tristate "Support for generic platform NAND driver" - depends on MTD_NAND help This implements a generic NAND driver for on-SOC platform devices. You will need to provide platform-specific functions @@ -442,14 +441,14 @@ config MTD_NAND_PLATFORM config MTD_ALAUDA tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1" - depends on MTD_NAND && USB + depends on USB help These two (and possibly other) Alauda-based cardreaders for SmartMedia and xD allow raw flash access. config MTD_NAND_ORION tristate "NAND Flash support for Marvell Orion SoC" - depends on PLAT_ORION && MTD_NAND + depends on PLAT_ORION help This enables the NAND flash controller on Orion machines. @@ -458,7 +457,7 @@ config MTD_NAND_ORION config MTD_NAND_FSL_ELBC tristate "NAND support for Freescale eLBC controllers" - depends on MTD_NAND && PPC_OF + depends on PPC_OF help Various Freescale chips, including the 8313, include a NAND Flash Controller Module with built-in hardware ECC capabilities. @@ -467,7 +466,7 @@ config MTD_NAND_FSL_ELBC config MTD_NAND_FSL_UPM tristate "Support for NAND on Freescale UPM" - depends on MTD_NAND && (PPC_83xx || PPC_85xx) + depends on PPC_83xx || PPC_85xx select FSL_LBC help Enables support for NAND Flash chips wired onto Freescale PowerPC @@ -482,7 +481,7 @@ config MTD_NAND_MPC5121_NFC config MTD_NAND_MXC tristate "MXC NAND support" - depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 + depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51 help This enables the driver for the NAND flash controller on the MXC processors. @@ -495,7 +494,7 @@ config MTD_NAND_NOMADIK config MTD_NAND_SH_FLCTL tristate "Support for NAND on Renesas SuperH FLCTL" - depends on MTD_NAND && (SUPERH || ARCH_SHMOBILE) + depends on SUPERH || ARCH_SHMOBILE help Several Renesas SuperH CPU has FLCTL. This option enables support for NAND Flash using FLCTL. @@ -515,7 +514,7 @@ config MTD_NAND_TXX9NDFMC config MTD_NAND_SOCRATES tristate "Support for NAND on Socrates board" - depends on MTD_NAND && SOCRATES + depends on SOCRATES help Enables support for NAND Flash chips wired onto Socrates board. diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 04d30887c..ccce0f0 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -364,7 +364,7 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) } } -#ifdef CONFIG_MTD_PARTITIONS +#ifdef CONFIG_MTD_CMDLINE_PARTS static const char *part_probes[] = { "cmdlinepart", NULL }; #endif diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 2974995..a382e3d 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -20,9 +20,6 @@ * - DMA supported in ECC_HW * - YAFFS tested as rootfs in both ECC_HW and ECC_SW * - * TODO: - * Enable JFFS2 over NAND as rootfs - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -206,7 +203,7 @@ static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd, if (ctrl & NAND_CLE) bfin_write_NFC_CMD(cmd); - else + else if (ctrl & NAND_ALE) bfin_write_NFC_ADDR(cmd); SSYNC(); } @@ -218,9 +215,9 @@ static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd, */ static int bf5xx_nand_devready(struct mtd_info *mtd) { - unsigned short val = bfin_read_NFC_IRQSTAT(); + unsigned short val = bfin_read_NFC_STAT(); - if ((val & NBUSYIRQ) == NBUSYIRQ) + if ((val & NBUSY) == NBUSY) return 1; else return 0; @@ -317,18 +314,16 @@ static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat, static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) { - struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); - struct bf5xx_nand_platform *plat = info->platform; - unsigned short page_size = (plat->page_size ? 512 : 256); + struct nand_chip *chip = mtd->priv; int ret; ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); - /* If page size is 512, correct second 256 bytes */ - if (page_size == 512) { + /* If ecc size is 512, correct second 256 bytes */ + if (chip->ecc.size == 512) { dat += 256; - read_ecc += 8; - calc_ecc += 8; + read_ecc += 3; + calc_ecc += 3; ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); } @@ -344,13 +339,12 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); - struct bf5xx_nand_platform *plat = info->platform; - u16 page_size = (plat->page_size ? 512 : 256); + struct nand_chip *chip = mtd->priv; u16 ecc0, ecc1; u32 code[2]; u8 *p; - /* first 4 bytes ECC code for 256 page size */ + /* first 3 bytes ECC code for 256 page size */ ecc0 = bfin_read_NFC_ECC0(); ecc1 = bfin_read_NFC_ECC1(); @@ -358,12 +352,11 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd, dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]); - /* first 3 bytes in ecc_code for 256 page size */ p = (u8 *) code; memcpy(ecc_code, p, 3); - /* second 4 bytes ECC code for 512 page size */ - if (page_size == 512) { + /* second 3 bytes ECC code for 512 ecc size */ + if (chip->ecc.size == 512) { ecc0 = bfin_read_NFC_ECC2(); ecc1 = bfin_read_NFC_ECC3(); code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); @@ -483,8 +476,7 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd, uint8_t *buf, int is_read) { struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); - struct bf5xx_nand_platform *plat = info->platform; - unsigned short page_size = (plat->page_size ? 512 : 256); + struct nand_chip *chip = mtd->priv; unsigned short val; dev_dbg(info->device, " mtd->%p, buf->%p, is_read %d\n", @@ -498,10 +490,10 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd, */ if (is_read) invalidate_dcache_range((unsigned int)buf, - (unsigned int)(buf + page_size)); + (unsigned int)(buf + chip->ecc.size)); else flush_dcache_range((unsigned int)buf, - (unsigned int)(buf + page_size)); + (unsigned int)(buf + chip->ecc.size)); /* * This register must be written before each page is @@ -510,6 +502,8 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd, */ bfin_write_NFC_RST(ECC_RST); SSYNC(); + while (bfin_read_NFC_RST() & ECC_RST) + cpu_relax(); disable_dma(CH_NFC); clear_dma_irqstat(CH_NFC); @@ -520,13 +514,13 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd, /* The DMAs have different size on BF52x and BF54x */ #ifdef CONFIG_BF52x - set_dma_x_count(CH_NFC, (page_size >> 1)); + set_dma_x_count(CH_NFC, (chip->ecc.size >> 1)); set_dma_x_modify(CH_NFC, 2); val = DI_EN | WDSIZE_16; #endif #ifdef CONFIG_BF54x - set_dma_x_count(CH_NFC, (page_size >> 2)); + set_dma_x_count(CH_NFC, (chip->ecc.size >> 2)); set_dma_x_modify(CH_NFC, 4); val = DI_EN | WDSIZE_32; #endif @@ -548,12 +542,11 @@ static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); - struct bf5xx_nand_platform *plat = info->platform; - unsigned short page_size = (plat->page_size ? 512 : 256); + struct nand_chip *chip = mtd->priv; dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len); - if (len == page_size) + if (len == chip->ecc.size) bf5xx_nand_dma_rw(mtd, buf, 1); else bf5xx_nand_read_buf(mtd, buf, len); @@ -563,17 +556,32 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); - struct bf5xx_nand_platform *plat = info->platform; - unsigned short page_size = (plat->page_size ? 512 : 256); + struct nand_chip *chip = mtd->priv; dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len); - if (len == page_size) + if (len == chip->ecc.size) bf5xx_nand_dma_rw(mtd, (uint8_t *)buf, 0); else bf5xx_nand_write_buf(mtd, buf, len); } +static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int page) +{ + bf5xx_nand_read_buf(mtd, buf, mtd->writesize); + bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + +static void bf5xx_nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf) +{ + bf5xx_nand_write_buf(mtd, buf, mtd->writesize); + bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize); +} + /* * System initialization functions */ @@ -627,15 +635,14 @@ static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info) /* setup NFC_CTL register */ dev_info(info->device, - "page_size=%d, data_width=%d, wr_dly=%d, rd_dly=%d\n", - (plat->page_size ? 512 : 256), + "data_width=%d, wr_dly=%d, rd_dly=%d\n", (plat->data_width ? 16 : 8), plat->wr_dly, plat->rd_dly); - val = (plat->page_size << NFC_PG_SIZE_OFFSET) | + val = (1 << NFC_PG_SIZE_OFFSET) | (plat->data_width << NFC_NWIDTH_OFFSET) | (plat->rd_dly << NFC_RDDLY_OFFSET) | - (plat->rd_dly << NFC_WRDLY_OFFSET); + (plat->wr_dly << NFC_WRDLY_OFFSET); dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val); bfin_write_NFC_CTL(val); @@ -698,6 +705,33 @@ static int __devexit bf5xx_nand_remove(struct platform_device *pdev) return 0; } +static int bf5xx_nand_scan(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + int ret; + + ret = nand_scan_ident(mtd, 1); + if (ret) + return ret; + + if (hardware_ecc) { + /* + * for nand with page size > 512B, think it as several sections with 512B + */ + if (likely(mtd->writesize >= 512)) { + chip->ecc.size = 512; + chip->ecc.bytes = 6; + } else { + chip->ecc.size = 256; + chip->ecc.bytes = 3; + bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET)); + SSYNC(); + } + } + + return nand_scan_tail(mtd); +} + /* * bf5xx_nand_probe * @@ -783,27 +817,20 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) chip->badblock_pattern = &bootrom_bbt; chip->ecc.layout = &bootrom_ecclayout; #endif - - if (plat->page_size == NFC_PG_SIZE_256) { - chip->ecc.bytes = 3; - chip->ecc.size = 256; - } else if (plat->page_size == NFC_PG_SIZE_512) { - chip->ecc.bytes = 6; - chip->ecc.size = 512; - } - chip->read_buf = bf5xx_nand_dma_read_buf; chip->write_buf = bf5xx_nand_dma_write_buf; chip->ecc.calculate = bf5xx_nand_calculate_ecc; chip->ecc.correct = bf5xx_nand_correct_data; chip->ecc.mode = NAND_ECC_HW; chip->ecc.hwctl = bf5xx_nand_enable_hwecc; + chip->ecc.read_page_raw = bf5xx_nand_read_page_raw; + chip->ecc.write_page_raw = bf5xx_nand_write_page_raw; } else { chip->ecc.mode = NAND_ECC_SOFT; } /* scan hardware nand chip and setup mtd info data struct */ - if (nand_scan(mtd, 1)) { + if (bf5xx_nand_scan(mtd)) { err = -ENXIO; goto out_err_nand_scan; } diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 9c9d893..2ac7367 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -311,7 +311,9 @@ static int nand_davinci_correct_4bit(struct mtd_info *mtd, unsigned short ecc10[8]; unsigned short *ecc16; u32 syndrome[4]; + u32 ecc_state; unsigned num_errors, corrected; + unsigned long timeo = jiffies + msecs_to_jiffies(100); /* All bytes 0xff? It's an erased page; ignore its ECC. */ for (i = 0; i < 10; i++) { @@ -361,6 +363,21 @@ compare: */ davinci_nand_writel(info, NANDFCR_OFFSET, davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13)); + + /* + * ECC_STATE field reads 0x3 (Error correction complete) immediately + * after setting the 4BITECC_ADD_CALC_START bit. So if you immediately + * begin trying to poll for the state, you may fall right out of your + * loop without any of the correction calculations having taken place. + * The recommendation from the hardware team is to wait till ECC_STATE + * reads less than 4, which means ECC HW has entered correction state. + */ + do { + ecc_state = (davinci_nand_readl(info, + NANDFSR_OFFSET) >> 8) & 0x0f; + cpu_relax(); + } while ((ecc_state < 4) && time_before(jiffies, timeo)); + for (;;) { u32 fsr = davinci_nand_readl(info, NANDFSR_OFFSET); diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 3dfda9c..618fb42 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -21,6 +21,7 @@ #include <linux/delay.h> #include <linux/wait.h> #include <linux/mutex.h> +#include <linux/slab.h> #include <linux/pci.h> #include <linux/mtd/mtd.h> #include <linux/module.h> @@ -29,15 +30,15 @@ MODULE_LICENSE("GPL"); -/* We define a module parameter that allows the user to override +/* We define a module parameter that allows the user to override * the hardware and decide what timing mode should be used. */ #define NAND_DEFAULT_TIMINGS -1 static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; module_param(onfi_timing_mode, int, S_IRUGO); -MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates" - " use default timings"); +MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting." + " -1 indicates use default timings"); #define DENALI_NAND_NAME "denali-nand" @@ -54,13 +55,13 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates INTR_STATUS0__RST_COMP | \ INTR_STATUS0__ERASE_COMP) -/* indicates whether or not the internal value for the flash bank is +/* indicates whether or not the internal value for the flash bank is valid or not */ -#define CHIP_SELECT_INVALID -1 +#define CHIP_SELECT_INVALID -1 #define SUPPORT_8BITECC 1 -/* This macro divides two integers and rounds fractional values up +/* This macro divides two integers and rounds fractional values up * to the nearest integer value. */ #define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y))) @@ -83,7 +84,7 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates #define ADDR_CYCLE 1 #define STATUS_CYCLE 2 -/* this is a helper macro that allows us to +/* this is a helper macro that allows us to * format the bank into the proper bits for the controller */ #define BANK(x) ((x) << 24) @@ -95,59 +96,64 @@ static const struct pci_device_id denali_pci_ids[] = { }; -/* these are static lookup tables that give us easy access to - registers in the NAND controller. +/* these are static lookup tables that give us easy access to + registers in the NAND controller. */ -static const uint32_t intr_status_addresses[4] = {INTR_STATUS0, - INTR_STATUS1, - INTR_STATUS2, +static const uint32_t intr_status_addresses[4] = {INTR_STATUS0, + INTR_STATUS1, + INTR_STATUS2, INTR_STATUS3}; static const uint32_t device_reset_banks[4] = {DEVICE_RESET__BANK0, - DEVICE_RESET__BANK1, - DEVICE_RESET__BANK2, - DEVICE_RESET__BANK3}; + DEVICE_RESET__BANK1, + DEVICE_RESET__BANK2, + DEVICE_RESET__BANK3}; static const uint32_t operation_timeout[4] = {INTR_STATUS0__TIME_OUT, - INTR_STATUS1__TIME_OUT, - INTR_STATUS2__TIME_OUT, - INTR_STATUS3__TIME_OUT}; + INTR_STATUS1__TIME_OUT, + INTR_STATUS2__TIME_OUT, + INTR_STATUS3__TIME_OUT}; static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP, - INTR_STATUS1__RST_COMP, - INTR_STATUS2__RST_COMP, - INTR_STATUS3__RST_COMP}; + INTR_STATUS1__RST_COMP, + INTR_STATUS2__RST_COMP, + INTR_STATUS3__RST_COMP}; /* specifies the debug level of the driver */ -static int nand_debug_level = 0; +static int nand_debug_level; /* forward declarations */ static void clear_interrupts(struct denali_nand_info *denali); -static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask); -static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask); +static uint32_t wait_for_irq(struct denali_nand_info *denali, + uint32_t irq_mask); +static void denali_irq_enable(struct denali_nand_info *denali, + uint32_t int_mask); static uint32_t read_interrupt_status(struct denali_nand_info *denali); #define DEBUG_DENALI 0 /* This is a wrapper for writing to the denali registers. * this allows us to create debug information so we can - * observe how the driver is programming the device. + * observe how the driver is programming the device. * it uses standard linux convention for (val, addr) */ static void denali_write32(uint32_t value, void *addr) { - iowrite32(value, addr); + iowrite32(value, addr); #if DEBUG_DENALI - printk(KERN_ERR "wrote: 0x%x -> 0x%x\n", value, (uint32_t)((uint32_t)addr & 0x1fff)); + printk(KERN_INFO "wrote: 0x%x -> 0x%x\n", value, + (uint32_t)((uint32_t)addr & 0x1fff)); #endif -} +} -/* Certain operations for the denali NAND controller use an indexed mode to read/write - data. The operation is performed by writing the address value of the command to - the device memory followed by the data. This function abstracts this common - operation. +/* Certain operations for the denali NAND controller use + * an indexed mode to read/write data. The operation is + * performed by writing the address value of the command + * to the device memory followed by the data. This function + * abstracts this common operation. */ -static void index_addr(struct denali_nand_info *denali, uint32_t address, uint32_t data) +static void index_addr(struct denali_nand_info *denali, + uint32_t address, uint32_t data) { denali_write32(address, denali->flash_mem); denali_write32(data, denali->flash_mem + 0x10); @@ -161,7 +167,7 @@ static void index_addr_read_data(struct denali_nand_info *denali, *pdata = ioread32(denali->flash_mem + 0x10); } -/* We need to buffer some data for some of the NAND core routines. +/* We need to buffer some data for some of the NAND core routines. * The operations manage buffering that data. */ static void reset_buf(struct denali_nand_info *denali) { @@ -183,7 +189,7 @@ static void read_status(struct denali_nand_info *denali) reset_buf(denali); /* initiate a device status read */ - cmd = MODE_11 | BANK(denali->flash_bank); + cmd = MODE_11 | BANK(denali->flash_bank); index_addr(denali, cmd | COMMAND_CYCLE, 0x70); denali_write32(cmd | STATUS_CYCLE, denali->flash_mem); @@ -191,7 +197,8 @@ static void read_status(struct denali_nand_info *denali) write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10)); #if DEBUG_DENALI - printk("device reporting status value of 0x%2x\n", denali->buf.buf[0]); + printk(KERN_INFO "device reporting status value of 0x%2x\n", + denali->buf.buf[0]); #endif } @@ -199,7 +206,7 @@ static void read_status(struct denali_nand_info *denali) static void reset_bank(struct denali_nand_info *denali) { uint32_t irq_status = 0; - uint32_t irq_mask = reset_complete[denali->flash_bank] | + uint32_t irq_mask = reset_complete[denali->flash_bank] | operation_timeout[denali->flash_bank]; int bank = 0; @@ -209,15 +216,13 @@ static void reset_bank(struct denali_nand_info *denali) denali_write32(bank, denali->flash_reg + DEVICE_RESET); irq_status = wait_for_irq(denali, irq_mask); - + if (irq_status & operation_timeout[denali->flash_bank]) - { printk(KERN_ERR "reset bank failed.\n"); - } } /* Reset the flash controller */ -static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali) +static uint16_t denali_nand_reset(struct denali_nand_info *denali) { uint32_t i; @@ -229,8 +234,10 @@ static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali) denali->flash_reg + intr_status_addresses[i]); for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) { - denali_write32(device_reset_banks[i], denali->flash_reg + DEVICE_RESET); - while (!(ioread32(denali->flash_reg + intr_status_addresses[i]) & + denali_write32(device_reset_banks[i], + denali->flash_reg + DEVICE_RESET); + while (!(ioread32(denali->flash_reg + + intr_status_addresses[i]) & (reset_complete[i] | operation_timeout[i]))) ; if (ioread32(denali->flash_reg + intr_status_addresses[i]) & @@ -246,11 +253,12 @@ static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali) return PASS; } -/* this routine calculates the ONFI timing values for a given mode and programs - * the clocking register accordingly. The mode is determined by the get_onfi_nand_para - routine. +/* this routine calculates the ONFI timing values for a given mode and + * programs the clocking register accordingly. The mode is determined by + * the get_onfi_nand_para routine. */ -static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali, uint16_t mode) +static void nand_onfi_timing_set(struct denali_nand_info *denali, + uint16_t mode) { uint16_t Trea[6] = {40, 30, 25, 20, 20, 16}; uint16_t Trp[6] = {50, 25, 17, 15, 12, 10}; @@ -347,136 +355,24 @@ static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali, uint16_t mode denali_write32(cs_cnt, denali->flash_reg + CS_SETUP_CNT); } -/* configures the initial ECC settings for the controller */ -static void set_ecc_config(struct denali_nand_info *denali) -{ -#if SUPPORT_8BITECC - if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) < 4096) || - (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) <= 128)) - denali_write32(8, denali->flash_reg + ECC_CORRECTION); -#endif - - if ((ioread32(denali->flash_reg + ECC_CORRECTION) & ECC_CORRECTION__VALUE) - == 1) { - denali->dev_info.wECCBytesPerSector = 4; - denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected; - denali->dev_info.wNumPageSpareFlag = - denali->dev_info.wPageSpareSize - - denali->dev_info.wPageDataSize / - (ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) * - denali->dev_info.wECCBytesPerSector - - denali->dev_info.wSpareSkipBytes; - } else { - denali->dev_info.wECCBytesPerSector = - (ioread32(denali->flash_reg + ECC_CORRECTION) & - ECC_CORRECTION__VALUE) * 13 / 8; - if ((denali->dev_info.wECCBytesPerSector) % 2 == 0) - denali->dev_info.wECCBytesPerSector += 2; - else - denali->dev_info.wECCBytesPerSector += 1; - - denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected; - denali->dev_info.wNumPageSpareFlag = denali->dev_info.wPageSpareSize - - denali->dev_info.wPageDataSize / - (ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) * - denali->dev_info.wECCBytesPerSector - - denali->dev_info.wSpareSkipBytes; - } -} - /* queries the NAND device to see what ONFI modes it supports. */ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali) { int i; - uint16_t blks_lun_l, blks_lun_h, n_of_luns; - uint32_t blockperlun, id; - - denali_write32(DEVICE_RESET__BANK0, denali->flash_reg + DEVICE_RESET); - - while (!((ioread32(denali->flash_reg + INTR_STATUS0) & - INTR_STATUS0__RST_COMP) | - (ioread32(denali->flash_reg + INTR_STATUS0) & - INTR_STATUS0__TIME_OUT))) - ; - - if (ioread32(denali->flash_reg + INTR_STATUS0) & INTR_STATUS0__RST_COMP) { - denali_write32(DEVICE_RESET__BANK1, denali->flash_reg + DEVICE_RESET); - while (!((ioread32(denali->flash_reg + INTR_STATUS1) & - INTR_STATUS1__RST_COMP) | - (ioread32(denali->flash_reg + INTR_STATUS1) & - INTR_STATUS1__TIME_OUT))) - ; - - if (ioread32(denali->flash_reg + INTR_STATUS1) & - INTR_STATUS1__RST_COMP) { - denali_write32(DEVICE_RESET__BANK2, - denali->flash_reg + DEVICE_RESET); - while (!((ioread32(denali->flash_reg + INTR_STATUS2) & - INTR_STATUS2__RST_COMP) | - (ioread32(denali->flash_reg + INTR_STATUS2) & - INTR_STATUS2__TIME_OUT))) - ; - - if (ioread32(denali->flash_reg + INTR_STATUS2) & - INTR_STATUS2__RST_COMP) { - denali_write32(DEVICE_RESET__BANK3, - denali->flash_reg + DEVICE_RESET); - while (!((ioread32(denali->flash_reg + INTR_STATUS3) & - INTR_STATUS3__RST_COMP) | - (ioread32(denali->flash_reg + INTR_STATUS3) & - INTR_STATUS3__TIME_OUT))) - ; - } else { - printk(KERN_ERR "Getting a time out for bank 2!\n"); - } - } else { - printk(KERN_ERR "Getting a time out for bank 1!\n"); - } - } - - denali_write32(INTR_STATUS0__TIME_OUT, denali->flash_reg + INTR_STATUS0); - denali_write32(INTR_STATUS1__TIME_OUT, denali->flash_reg + INTR_STATUS1); - denali_write32(INTR_STATUS2__TIME_OUT, denali->flash_reg + INTR_STATUS2); - denali_write32(INTR_STATUS3__TIME_OUT, denali->flash_reg + INTR_STATUS3); - - denali->dev_info.wONFIDevFeatures = - ioread32(denali->flash_reg + ONFI_DEVICE_FEATURES); - denali->dev_info.wONFIOptCommands = - ioread32(denali->flash_reg + ONFI_OPTIONAL_COMMANDS); - denali->dev_info.wONFITimingMode = - ioread32(denali->flash_reg + ONFI_TIMING_MODE); - denali->dev_info.wONFIPgmCacheTimingMode = - ioread32(denali->flash_reg + ONFI_PGM_CACHE_TIMING_MODE); - - n_of_luns = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) & - ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS; - blks_lun_l = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L); - blks_lun_h = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U); - - blockperlun = (blks_lun_h << 16) | blks_lun_l; - - denali->dev_info.wTotalBlocks = n_of_luns * blockperlun; - + /* we needn't to do a reset here because driver has already + * reset all the banks before + * */ if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) & ONFI_TIMING_MODE__VALUE)) return FAIL; for (i = 5; i > 0; i--) { - if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) & (0x01 << i)) + if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) & + (0x01 << i)) break; } - NAND_ONFi_Timing_Mode(denali, i); - - index_addr(denali, MODE_11 | 0, 0x90); - index_addr(denali, MODE_11 | 1, 0); - - for (i = 0; i < 3; i++) - index_addr_read_data(denali, MODE_11 | 2, &id); - - nand_dbg_print(NAND_DBG_DEBUG, "3rd ID: 0x%x\n", id); - - denali->dev_info.MLCDevice = id & 0x0C; + nand_onfi_timing_set(denali, i); /* By now, all the ONFI devices we know support the page cache */ /* rw feature. So here we enable the pipeline_rw_ahead feature */ @@ -486,25 +382,10 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali) return PASS; } -static void get_samsung_nand_para(struct denali_nand_info *denali) +static void get_samsung_nand_para(struct denali_nand_info *denali, + uint8_t device_id) { - uint8_t no_of_planes; - uint32_t blk_size; - uint64_t plane_size, capacity; - uint32_t id_bytes[5]; - int i; - - index_addr(denali, (uint32_t)(MODE_11 | 0), 0x90); - index_addr(denali, (uint32_t)(MODE_11 | 1), 0); - for (i = 0; i < 5; i++) - index_addr_read_data(denali, (uint32_t)(MODE_11 | 2), &id_bytes[i]); - - nand_dbg_print(NAND_DBG_DEBUG, - "ID bytes: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n", - id_bytes[0], id_bytes[1], id_bytes[2], - id_bytes[3], id_bytes[4]); - - if ((id_bytes[1] & 0xff) == 0xd3) { /* Samsung K9WAG08U1A */ + if (device_id == 0xd3) { /* Samsung K9WAG08U1A */ /* Set timing register values according to datasheet */ denali_write32(5, denali->flash_reg + ACC_CLKS); denali_write32(20, denali->flash_reg + RE_2_WE); @@ -514,19 +395,10 @@ static void get_samsung_nand_para(struct denali_nand_info *denali) denali_write32(2, denali->flash_reg + RDWR_EN_HI_CNT); denali_write32(2, denali->flash_reg + CS_SETUP_CNT); } - - no_of_planes = 1 << ((id_bytes[4] & 0x0c) >> 2); - plane_size = (uint64_t)64 << ((id_bytes[4] & 0x70) >> 4); - blk_size = 64 << ((ioread32(denali->flash_reg + DEVICE_PARAM_1) & 0x30) >> 4); - capacity = (uint64_t)128 * plane_size * no_of_planes; - - do_div(capacity, blk_size); - denali->dev_info.wTotalBlocks = capacity; } static void get_toshiba_nand_para(struct denali_nand_info *denali) { - void __iomem *scratch_reg; uint32_t tmp; /* Workaround to fix a controller bug which reports a wrong */ @@ -536,81 +408,52 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali) denali_write32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); tmp = ioread32(denali->flash_reg + DEVICES_CONNECTED) * ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE); - denali_write32(tmp, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); + denali_write32(tmp, + denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); #if SUPPORT_15BITECC denali_write32(15, denali->flash_reg + ECC_CORRECTION); #elif SUPPORT_8BITECC denali_write32(8, denali->flash_reg + ECC_CORRECTION); #endif } - - /* As Toshiba NAND can not provide it's block number, */ - /* so here we need user to provide the correct block */ - /* number in a scratch register before the Linux NAND */ - /* driver is loaded. If no valid value found in the scratch */ - /* register, then we use default block number value */ - scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE); - if (!scratch_reg) { - printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d", - __FILE__, __LINE__); - denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS; - } else { - nand_dbg_print(NAND_DBG_WARN, - "Spectra: ioremap reg address: 0x%p\n", scratch_reg); - denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg); - if (denali->dev_info.wTotalBlocks < 512) - denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS; - iounmap(scratch_reg); - } } -static void get_hynix_nand_para(struct denali_nand_info *denali) +static void get_hynix_nand_para(struct denali_nand_info *denali, + uint8_t device_id) { - void __iomem *scratch_reg; uint32_t main_size, spare_size; - switch (denali->dev_info.wDeviceID) { + switch (device_id) { case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */ case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */ denali_write32(128, denali->flash_reg + PAGES_PER_BLOCK); denali_write32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE); denali_write32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); - main_size = 4096 * ioread32(denali->flash_reg + DEVICES_CONNECTED); - spare_size = 224 * ioread32(denali->flash_reg + DEVICES_CONNECTED); - denali_write32(main_size, denali->flash_reg + LOGICAL_PAGE_DATA_SIZE); - denali_write32(spare_size, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); + main_size = 4096 * + ioread32(denali->flash_reg + DEVICES_CONNECTED); + spare_size = 224 * + ioread32(denali->flash_reg + DEVICES_CONNECTED); + denali_write32(main_size, + denali->flash_reg + LOGICAL_PAGE_DATA_SIZE); + denali_write32(spare_size, + denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); denali_write32(0, denali->flash_reg + DEVICE_WIDTH); #if SUPPORT_15BITECC denali_write32(15, denali->flash_reg + ECC_CORRECTION); #elif SUPPORT_8BITECC denali_write32(8, denali->flash_reg + ECC_CORRECTION); #endif - denali->dev_info.MLCDevice = 1; break; default: nand_dbg_print(NAND_DBG_WARN, "Spectra: Unknown Hynix NAND (Device ID: 0x%x)." "Will use default parameter values instead.\n", - denali->dev_info.wDeviceID); - } - - scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE); - if (!scratch_reg) { - printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d", - __FILE__, __LINE__); - denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS; - } else { - nand_dbg_print(NAND_DBG_WARN, - "Spectra: ioremap reg address: 0x%p\n", scratch_reg); - denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg); - if (denali->dev_info.wTotalBlocks < 512) - denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS; - iounmap(scratch_reg); + device_id); } } /* determines how many NAND chips are connected to the controller. Note for - Intel CE4100 devices we don't support more than one device. + Intel CE4100 devices we don't support more than one device. */ static void find_valid_banks(struct denali_nand_info *denali) { @@ -621,7 +464,8 @@ static void find_valid_banks(struct denali_nand_info *denali) for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) { index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90); index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0); - index_addr_read_data(denali, (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]); + index_addr_read_data(denali, + (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]); nand_dbg_print(NAND_DBG_DEBUG, "Return 1st ID for bank[%d]: %x\n", i, id[i]); @@ -637,14 +481,12 @@ static void find_valid_banks(struct denali_nand_info *denali) } } - if (denali->platform == INTEL_CE4100) - { + if (denali->platform == INTEL_CE4100) { /* Platform limitations of the CE4100 device limit * users to a single chip solution for NAND. - * Multichip support is not enabled. - */ - if (denali->total_used_banks != 1) - { + * Multichip support is not enabled. + */ + if (denali->total_used_banks != 1) { printk(KERN_ERR "Sorry, Intel CE4100 only supports " "a single NAND device.\n"); BUG(); @@ -656,150 +498,60 @@ static void find_valid_banks(struct denali_nand_info *denali) static void detect_partition_feature(struct denali_nand_info *denali) { + /* For MRST platform, denali->fwblks represent the + * number of blocks firmware is taken, + * FW is in protect partition and MTD driver has no + * permission to access it. So let driver know how many + * blocks it can't touch. + * */ if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) { if ((ioread32(denali->flash_reg + PERM_SRC_ID_1) & PERM_SRC_ID_1__SRCID) == SPECTRA_PARTITION_ID) { - denali->dev_info.wSpectraStartBlock = + denali->fwblks = ((ioread32(denali->flash_reg + MIN_MAX_BANK_1) & MIN_MAX_BANK_1__MIN_VALUE) * - denali->dev_info.wTotalBlocks) + denali->blksperchip) + (ioread32(denali->flash_reg + MIN_BLK_ADDR_1) & MIN_BLK_ADDR_1__VALUE); - - denali->dev_info.wSpectraEndBlock = - (((ioread32(denali->flash_reg + MIN_MAX_BANK_1) & - MIN_MAX_BANK_1__MAX_VALUE) >> 2) * - denali->dev_info.wTotalBlocks) - + - (ioread32(denali->flash_reg + MAX_BLK_ADDR_1) & - MAX_BLK_ADDR_1__VALUE); - - denali->dev_info.wTotalBlocks *= denali->total_used_banks; - - if (denali->dev_info.wSpectraEndBlock >= - denali->dev_info.wTotalBlocks) { - denali->dev_info.wSpectraEndBlock = - denali->dev_info.wTotalBlocks - 1; - } - - denali->dev_info.wDataBlockNum = - denali->dev_info.wSpectraEndBlock - - denali->dev_info.wSpectraStartBlock + 1; - } else { - denali->dev_info.wTotalBlocks *= denali->total_used_banks; - denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK; - denali->dev_info.wSpectraEndBlock = - denali->dev_info.wTotalBlocks - 1; - denali->dev_info.wDataBlockNum = - denali->dev_info.wSpectraEndBlock - - denali->dev_info.wSpectraStartBlock + 1; - } - } else { - denali->dev_info.wTotalBlocks *= denali->total_used_banks; - denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK; - denali->dev_info.wSpectraEndBlock = denali->dev_info.wTotalBlocks - 1; - denali->dev_info.wDataBlockNum = - denali->dev_info.wSpectraEndBlock - - denali->dev_info.wSpectraStartBlock + 1; - } + } else + denali->fwblks = SPECTRA_START_BLOCK; + } else + denali->fwblks = SPECTRA_START_BLOCK; } -static void dump_device_info(struct denali_nand_info *denali) -{ - nand_dbg_print(NAND_DBG_DEBUG, "denali->dev_info:\n"); - nand_dbg_print(NAND_DBG_DEBUG, "DeviceMaker: 0x%x\n", - denali->dev_info.wDeviceMaker); - nand_dbg_print(NAND_DBG_DEBUG, "DeviceID: 0x%x\n", - denali->dev_info.wDeviceID); - nand_dbg_print(NAND_DBG_DEBUG, "DeviceType: 0x%x\n", - denali->dev_info.wDeviceType); - nand_dbg_print(NAND_DBG_DEBUG, "SpectraStartBlock: %d\n", - denali->dev_info.wSpectraStartBlock); - nand_dbg_print(NAND_DBG_DEBUG, "SpectraEndBlock: %d\n", - denali->dev_info.wSpectraEndBlock); - nand_dbg_print(NAND_DBG_DEBUG, "TotalBlocks: %d\n", - denali->dev_info.wTotalBlocks); - nand_dbg_print(NAND_DBG_DEBUG, "PagesPerBlock: %d\n", - denali->dev_info.wPagesPerBlock); - nand_dbg_print(NAND_DBG_DEBUG, "PageSize: %d\n", - denali->dev_info.wPageSize); - nand_dbg_print(NAND_DBG_DEBUG, "PageDataSize: %d\n", - denali->dev_info.wPageDataSize); - nand_dbg_print(NAND_DBG_DEBUG, "PageSpareSize: %d\n", - denali->dev_info.wPageSpareSize); - nand_dbg_print(NAND_DBG_DEBUG, "NumPageSpareFlag: %d\n", - denali->dev_info.wNumPageSpareFlag); - nand_dbg_print(NAND_DBG_DEBUG, "ECCBytesPerSector: %d\n", - denali->dev_info.wECCBytesPerSector); - nand_dbg_print(NAND_DBG_DEBUG, "BlockSize: %d\n", - denali->dev_info.wBlockSize); - nand_dbg_print(NAND_DBG_DEBUG, "BlockDataSize: %d\n", - denali->dev_info.wBlockDataSize); - nand_dbg_print(NAND_DBG_DEBUG, "DataBlockNum: %d\n", - denali->dev_info.wDataBlockNum); - nand_dbg_print(NAND_DBG_DEBUG, "PlaneNum: %d\n", - denali->dev_info.bPlaneNum); - nand_dbg_print(NAND_DBG_DEBUG, "DeviceMainAreaSize: %d\n", - denali->dev_info.wDeviceMainAreaSize); - nand_dbg_print(NAND_DBG_DEBUG, "DeviceSpareAreaSize: %d\n", - denali->dev_info.wDeviceSpareAreaSize); - nand_dbg_print(NAND_DBG_DEBUG, "DevicesConnected: %d\n", - denali->dev_info.wDevicesConnected); - nand_dbg_print(NAND_DBG_DEBUG, "DeviceWidth: %d\n", - denali->dev_info.wDeviceWidth); - nand_dbg_print(NAND_DBG_DEBUG, "HWRevision: 0x%x\n", - denali->dev_info.wHWRevision); - nand_dbg_print(NAND_DBG_DEBUG, "HWFeatures: 0x%x\n", - denali->dev_info.wHWFeatures); - nand_dbg_print(NAND_DBG_DEBUG, "ONFIDevFeatures: 0x%x\n", - denali->dev_info.wONFIDevFeatures); - nand_dbg_print(NAND_DBG_DEBUG, "ONFIOptCommands: 0x%x\n", - denali->dev_info.wONFIOptCommands); - nand_dbg_print(NAND_DBG_DEBUG, "ONFITimingMode: 0x%x\n", - denali->dev_info.wONFITimingMode); - nand_dbg_print(NAND_DBG_DEBUG, "ONFIPgmCacheTimingMode: 0x%x\n", - denali->dev_info.wONFIPgmCacheTimingMode); - nand_dbg_print(NAND_DBG_DEBUG, "MLCDevice: %s\n", - denali->dev_info.MLCDevice ? "Yes" : "No"); - nand_dbg_print(NAND_DBG_DEBUG, "SpareSkipBytes: %d\n", - denali->dev_info.wSpareSkipBytes); - nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageNumber: %d\n", - denali->dev_info.nBitsInPageNumber); - nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageDataSize: %d\n", - denali->dev_info.nBitsInPageDataSize); - nand_dbg_print(NAND_DBG_DEBUG, "BitsInBlockDataSize: %d\n", - denali->dev_info.nBitsInBlockDataSize); -} - -static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali) +static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) { uint16_t status = PASS; - uint8_t no_of_planes; + uint32_t id_bytes[5], addr; + uint8_t i, maf_id, device_id; nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); - denali->dev_info.wDeviceMaker = ioread32(denali->flash_reg + MANUFACTURER_ID); - denali->dev_info.wDeviceID = ioread32(denali->flash_reg + DEVICE_ID); - denali->dev_info.bDeviceParam0 = ioread32(denali->flash_reg + DEVICE_PARAM_0); - denali->dev_info.bDeviceParam1 = ioread32(denali->flash_reg + DEVICE_PARAM_1); - denali->dev_info.bDeviceParam2 = ioread32(denali->flash_reg + DEVICE_PARAM_2); - - denali->dev_info.MLCDevice = ioread32(denali->flash_reg + DEVICE_PARAM_0) & 0x0c; + /* Use read id method to get device ID and other + * params. For some NAND chips, controller can't + * report the correct device ID by reading from + * DEVICE_ID register + * */ + addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); + index_addr(denali, (uint32_t)addr | 0, 0x90); + index_addr(denali, (uint32_t)addr | 1, 0); + for (i = 0; i < 5; i++) + index_addr_read_data(denali, addr | 2, &id_bytes[i]); + maf_id = id_bytes[0]; + device_id = id_bytes[1]; if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) & ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */ if (FAIL == get_onfi_nand_para(denali)) return FAIL; - } else if (denali->dev_info.wDeviceMaker == 0xEC) { /* Samsung NAND */ - get_samsung_nand_para(denali); - } else if (denali->dev_info.wDeviceMaker == 0x98) { /* Toshiba NAND */ + } else if (maf_id == 0xEC) { /* Samsung NAND */ + get_samsung_nand_para(denali, device_id); + } else if (maf_id == 0x98) { /* Toshiba NAND */ get_toshiba_nand_para(denali); - } else if (denali->dev_info.wDeviceMaker == 0xAD) { /* Hynix NAND */ - get_hynix_nand_para(denali); - } else { - denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS; + } else if (maf_id == 0xAD) { /* Hynix NAND */ + get_hynix_nand_para(denali, device_id); } nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:" @@ -814,88 +566,20 @@ static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali) ioread32(denali->flash_reg + RDWR_EN_HI_CNT), ioread32(denali->flash_reg + CS_SETUP_CNT)); - denali->dev_info.wHWRevision = ioread32(denali->flash_reg + REVISION); - denali->dev_info.wHWFeatures = ioread32(denali->flash_reg + FEATURES); - - denali->dev_info.wDeviceMainAreaSize = - ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE); - denali->dev_info.wDeviceSpareAreaSize = - ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE); - - denali->dev_info.wPageDataSize = - ioread32(denali->flash_reg + LOGICAL_PAGE_DATA_SIZE); - - /* Note: When using the Micon 4K NAND device, the controller will report - * Page Spare Size as 216 bytes. But Micron's Spec say it's 218 bytes. - * And if force set it to 218 bytes, the controller can not work - * correctly. So just let it be. But keep in mind that this bug may - * cause - * other problems in future. - Yunpeng 2008-10-10 - */ - denali->dev_info.wPageSpareSize = - ioread32(denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); - - denali->dev_info.wPagesPerBlock = ioread32(denali->flash_reg + PAGES_PER_BLOCK); - - denali->dev_info.wPageSize = - denali->dev_info.wPageDataSize + denali->dev_info.wPageSpareSize; - denali->dev_info.wBlockSize = - denali->dev_info.wPageSize * denali->dev_info.wPagesPerBlock; - denali->dev_info.wBlockDataSize = - denali->dev_info.wPagesPerBlock * denali->dev_info.wPageDataSize; - - denali->dev_info.wDeviceWidth = ioread32(denali->flash_reg + DEVICE_WIDTH); - denali->dev_info.wDeviceType = - ((ioread32(denali->flash_reg + DEVICE_WIDTH) > 0) ? 16 : 8); - - denali->dev_info.wDevicesConnected = ioread32(denali->flash_reg + DEVICES_CONNECTED); - - denali->dev_info.wSpareSkipBytes = - ioread32(denali->flash_reg + SPARE_AREA_SKIP_BYTES) * - denali->dev_info.wDevicesConnected; - - denali->dev_info.nBitsInPageNumber = - ilog2(denali->dev_info.wPagesPerBlock); - denali->dev_info.nBitsInPageDataSize = - ilog2(denali->dev_info.wPageDataSize); - denali->dev_info.nBitsInBlockDataSize = - ilog2(denali->dev_info.wBlockDataSize); - - set_ecc_config(denali); - - no_of_planes = ioread32(denali->flash_reg + NUMBER_OF_PLANES) & - NUMBER_OF_PLANES__VALUE; - - switch (no_of_planes) { - case 0: - case 1: - case 3: - case 7: - denali->dev_info.bPlaneNum = no_of_planes + 1; - break; - default: - status = FAIL; - break; - } - find_valid_banks(denali); detect_partition_feature(denali); - dump_device_info(denali); - /* If the user specified to override the default timings - * with a specific ONFI mode, we apply those changes here. + * with a specific ONFI mode, we apply those changes here. */ if (onfi_timing_mode != NAND_DEFAULT_TIMINGS) - { - NAND_ONFi_Timing_Mode(denali, onfi_timing_mode); - } + nand_onfi_timing_set(denali, onfi_timing_mode); return status; } -static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali, +static void denali_set_intr_modes(struct denali_nand_info *denali, uint16_t INT_ENABLE) { nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n", @@ -912,7 +596,7 @@ static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali, */ static inline bool is_flash_bank_valid(int flash_bank) { - return (flash_bank >= 0 && flash_bank < 4); + return (flash_bank >= 0 && flash_bank < 4); } static void denali_irq_init(struct denali_nand_info *denali) @@ -920,7 +604,7 @@ static void denali_irq_init(struct denali_nand_info *denali) uint32_t int_mask = 0; /* Disable global interrupts */ - NAND_LLD_Enable_Disable_Interrupts(denali, false); + denali_set_intr_modes(denali, false); int_mask = DENALI_IRQ_ALL; @@ -935,11 +619,12 @@ static void denali_irq_init(struct denali_nand_info *denali) static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali) { - NAND_LLD_Enable_Disable_Interrupts(denali, false); + denali_set_intr_modes(denali, false); free_irq(irqnum, denali); } -static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask) +static void denali_irq_enable(struct denali_nand_info *denali, + uint32_t int_mask) { denali_write32(int_mask, denali->flash_reg + INTR_EN0); denali_write32(int_mask, denali->flash_reg + INTR_EN1); @@ -948,15 +633,16 @@ static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask } /* This function only returns when an interrupt that this driver cares about - * occurs. This is to reduce the overhead of servicing interrupts + * occurs. This is to reduce the overhead of servicing interrupts */ static inline uint32_t denali_irq_detected(struct denali_nand_info *denali) { - return (read_interrupt_status(denali) & DENALI_IRQ_ALL); + return read_interrupt_status(denali) & DENALI_IRQ_ALL; } /* Interrupts are cleared by writing a 1 to the appropriate status bit */ -static inline void clear_interrupt(struct denali_nand_info *denali, uint32_t irq_mask) +static inline void clear_interrupt(struct denali_nand_info *denali, + uint32_t irq_mask) { uint32_t intr_status_reg = 0; @@ -995,17 +681,15 @@ static void print_irq_log(struct denali_nand_info *denali) { int i = 0; - printk("ISR debug log index = %X\n", denali->idx); + printk(KERN_INFO "ISR debug log index = %X\n", denali->idx); for (i = 0; i < 32; i++) - { - printk("%08X: %08X\n", i, denali->irq_debug_array[i]); - } + printk(KERN_INFO "%08X: %08X\n", i, denali->irq_debug_array[i]); } #endif -/* This is the interrupt service routine. It handles all interrupts - * sent to this device. Note that on CE4100, this is a shared - * interrupt. +/* This is the interrupt service routine. It handles all interrupts + * sent to this device. Note that on CE4100, this is a shared + * interrupt. */ static irqreturn_t denali_isr(int irq, void *dev_id) { @@ -1015,20 +699,20 @@ static irqreturn_t denali_isr(int irq, void *dev_id) spin_lock(&denali->irq_lock); - /* check to see if a valid NAND chip has - * been selected. + /* check to see if a valid NAND chip has + * been selected. */ - if (is_flash_bank_valid(denali->flash_bank)) - { - /* check to see if controller generated + if (is_flash_bank_valid(denali->flash_bank)) { + /* check to see if controller generated * the interrupt, since this is a shared interrupt */ - if ((irq_status = denali_irq_detected(denali)) != 0) - { + irq_status = denali_irq_detected(denali); + if (irq_status != 0) { #if DEBUG_DENALI - denali->irq_debug_array[denali->idx++] = 0x10000000 | irq_status; + denali->irq_debug_array[denali->idx++] = + 0x10000000 | irq_status; denali->idx %= 32; - printk("IRQ status = 0x%04x\n", irq_status); + printk(KERN_INFO "IRQ status = 0x%04x\n", irq_status); #endif /* handle interrupt */ /* first acknowledge it */ @@ -1054,61 +738,62 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) bool retry = false; unsigned long timeout = msecs_to_jiffies(1000); - do - { + do { #if DEBUG_DENALI - printk("waiting for 0x%x\n", irq_mask); + printk(KERN_INFO "waiting for 0x%x\n", irq_mask); #endif - comp_res = wait_for_completion_timeout(&denali->complete, timeout); + comp_res = + wait_for_completion_timeout(&denali->complete, timeout); spin_lock_irq(&denali->irq_lock); intr_status = denali->irq_status; #if DEBUG_DENALI - denali->irq_debug_array[denali->idx++] = 0x20000000 | (irq_mask << 16) | intr_status; + denali->irq_debug_array[denali->idx++] = + 0x20000000 | (irq_mask << 16) | intr_status; denali->idx %= 32; #endif - if (intr_status & irq_mask) - { + if (intr_status & irq_mask) { denali->irq_status &= ~irq_mask; spin_unlock_irq(&denali->irq_lock); #if DEBUG_DENALI - if (retry) printk("status on retry = 0x%x\n", intr_status); + if (retry) + printk(KERN_INFO "status on retry = 0x%x\n", + intr_status); #endif /* our interrupt was detected */ break; - } - else - { - /* these are not the interrupts you are looking for - - need to wait again */ + } else { + /* these are not the interrupts you are looking for - + * need to wait again */ spin_unlock_irq(&denali->irq_lock); #if DEBUG_DENALI print_irq_log(denali); - printk("received irq nobody cared: irq_status = 0x%x," - " irq_mask = 0x%x, timeout = %ld\n", intr_status, irq_mask, comp_res); + printk(KERN_INFO "received irq nobody cared:" + " irq_status = 0x%x, irq_mask = 0x%x," + " timeout = %ld\n", intr_status, + irq_mask, comp_res); #endif retry = true; } } while (comp_res != 0); - if (comp_res == 0) - { + if (comp_res == 0) { /* timeout */ - printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n", - intr_status, irq_mask); + printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n", + intr_status, irq_mask); intr_status = 0; } return intr_status; } -/* This helper function setups the registers for ECC and whether or not +/* This helper function setups the registers for ECC and whether or not the spare area will be transfered. */ -static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, +static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, bool transfer_spare) { - int ecc_en_flag = 0, transfer_spare_flag = 0; + int ecc_en_flag = 0, transfer_spare_flag = 0; /* set ECC, transfer spare bits if needed */ ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0; @@ -1116,85 +801,85 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, /* Enable spare area/ECC per user's request. */ denali_write32(ecc_en_flag, denali->flash_reg + ECC_ENABLE); - denali_write32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); + denali_write32(transfer_spare_flag, + denali->flash_reg + TRANSFER_SPARE_REG); } -/* sends a pipeline command operation to the controller. See the Denali NAND - controller's user guide for more information (section 4.2.3.6). +/* sends a pipeline command operation to the controller. See the Denali NAND + controller's user guide for more information (section 4.2.3.6). */ -static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en, - bool transfer_spare, int access_type, - int op) +static int denali_send_pipeline_cmd(struct denali_nand_info *denali, + bool ecc_en, + bool transfer_spare, + int access_type, + int op) { int status = PASS; - uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0, + uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0, irq_mask = 0; - if (op == DENALI_READ) irq_mask = INTR_STATUS0__LOAD_COMP; - else if (op == DENALI_WRITE) irq_mask = 0; - else BUG(); + if (op == DENALI_READ) + irq_mask = INTR_STATUS0__LOAD_COMP; + else if (op == DENALI_WRITE) + irq_mask = 0; + else + BUG(); setup_ecc_for_xfer(denali, ecc_en, transfer_spare); #if DEBUG_DENALI spin_lock_irq(&denali->irq_lock); - denali->irq_debug_array[denali->idx++] = 0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) | (access_type << 4); + denali->irq_debug_array[denali->idx++] = + 0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) | + (access_type << 4); denali->idx %= 32; spin_unlock_irq(&denali->irq_lock); #endif /* clear interrupts */ - clear_interrupts(denali); + clear_interrupts(denali); addr = BANK(denali->flash_bank) | denali->page; - if (op == DENALI_WRITE && access_type != SPARE_ACCESS) - { - cmd = MODE_01 | addr; + if (op == DENALI_WRITE && access_type != SPARE_ACCESS) { + cmd = MODE_01 | addr; denali_write32(cmd, denali->flash_mem); - } - else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) - { + } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) { /* read spare area */ - cmd = MODE_10 | addr; + cmd = MODE_10 | addr; index_addr(denali, (uint32_t)cmd, access_type); - cmd = MODE_01 | addr; + cmd = MODE_01 | addr; denali_write32(cmd, denali->flash_mem); - } - else if (op == DENALI_READ) - { + } else if (op == DENALI_READ) { /* setup page read request for access type */ - cmd = MODE_10 | addr; + cmd = MODE_10 | addr; index_addr(denali, (uint32_t)cmd, access_type); /* page 33 of the NAND controller spec indicates we should not - use the pipeline commands in Spare area only mode. So we + use the pipeline commands in Spare area only mode. So we don't. */ - if (access_type == SPARE_ACCESS) - { + if (access_type == SPARE_ACCESS) { cmd = MODE_01 | addr; denali_write32(cmd, denali->flash_mem); - } - else - { - index_addr(denali, (uint32_t)cmd, 0x2000 | op | page_count); - - /* wait for command to be accepted - * can always use status0 bit as the mask is identical for each + } else { + index_addr(denali, (uint32_t)cmd, + 0x2000 | op | page_count); + + /* wait for command to be accepted + * can always use status0 bit as the + * mask is identical for each * bank. */ irq_status = wait_for_irq(denali, irq_mask); - if (irq_status == 0) - { + if (irq_status == 0) { printk(KERN_ERR "cmd, page, addr on timeout " - "(0x%x, 0x%x, 0x%x)\n", cmd, denali->page, addr); + "(0x%x, 0x%x, 0x%x)\n", cmd, + denali->page, addr); status = FAIL; - } - else - { + } else { cmd = MODE_01 | addr; denali_write32(cmd, denali->flash_mem); } @@ -1204,36 +889,35 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en } /* helper function that simply writes a buffer to the flash */ -static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_t *buf, - int len) +static int write_data_to_flash_mem(struct denali_nand_info *denali, + const uint8_t *buf, + int len) { uint32_t i = 0, *buf32; - /* verify that the len is a multiple of 4. see comment in - * read_data_from_flash_mem() */ + /* verify that the len is a multiple of 4. see comment in + * read_data_from_flash_mem() */ BUG_ON((len % 4) != 0); /* write the data to the flash memory */ buf32 = (uint32_t *)buf; for (i = 0; i < len / 4; i++) - { denali_write32(*buf32++, denali->flash_mem + 0x10); - } - return i*4; /* intent is to return the number of bytes read */ + return i*4; /* intent is to return the number of bytes read */ } /* helper function that simply reads a buffer from the flash */ -static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *buf, - int len) +static int read_data_from_flash_mem(struct denali_nand_info *denali, + uint8_t *buf, + int len) { uint32_t i = 0, *buf32; /* we assume that len will be a multiple of 4, if not * it would be nice to know about it ASAP rather than - * have random failures... - * - * This assumption is based on the fact that this - * function is designed to be used to read flash pages, + * have random failures... + * This assumption is based on the fact that this + * function is designed to be used to read flash pages, * which are typically multiples of 4... */ @@ -1242,10 +926,8 @@ static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *bu /* transfer the data from the flash */ buf32 = (uint32_t *)buf; for (i = 0; i < len / 4; i++) - { *buf32++ = ioread32(denali->flash_mem + 0x10); - } - return i*4; /* intent is to return the number of bytes read */ + return i*4; /* intent is to return the number of bytes read */ } /* writes OOB data to the device */ @@ -1253,38 +935,35 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); uint32_t irq_status = 0; - uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP | + uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP | INTR_STATUS0__PROGRAM_FAIL; int status = 0; denali->page = page; - if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS, - DENALI_WRITE) == PASS) - { + if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS, + DENALI_WRITE) == PASS) { write_data_to_flash_mem(denali, buf, mtd->oobsize); #if DEBUG_DENALI spin_lock_irq(&denali->irq_lock); - denali->irq_debug_array[denali->idx++] = 0x80000000 | mtd->oobsize; + denali->irq_debug_array[denali->idx++] = + 0x80000000 | mtd->oobsize; denali->idx %= 32; spin_unlock_irq(&denali->irq_lock); #endif - + /* wait for operation to complete */ irq_status = wait_for_irq(denali, irq_mask); - if (irq_status == 0) - { + if (irq_status == 0) { printk(KERN_ERR "OOB write failed\n"); status = -EIO; } - } - else - { + } else { printk(KERN_ERR "unable to send pipeline command\n"); - status = -EIO; + status = -EIO; } return status; } @@ -1293,60 +972,56 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t irq_mask = INTR_STATUS0__LOAD_COMP, irq_status = 0, addr = 0x0, cmd = 0x0; + uint32_t irq_mask = INTR_STATUS0__LOAD_COMP, + irq_status = 0, addr = 0x0, cmd = 0x0; denali->page = page; #if DEBUG_DENALI - printk("read_oob %d\n", page); + printk(KERN_INFO "read_oob %d\n", page); #endif - if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, - DENALI_READ) == PASS) - { - read_data_from_flash_mem(denali, buf, mtd->oobsize); + if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, + DENALI_READ) == PASS) { + read_data_from_flash_mem(denali, buf, mtd->oobsize); - /* wait for command to be accepted + /* wait for command to be accepted * can always use status0 bit as the mask is identical for each * bank. */ irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) - { - printk(KERN_ERR "page on OOB timeout %d\n", denali->page); - } + printk(KERN_ERR "page on OOB timeout %d\n", + denali->page); /* We set the device back to MAIN_ACCESS here as I observed * instability with the controller if you do a block erase * and the last transaction was a SPARE_ACCESS. Block erase * is reliable (according to the MTD test infrastructure) - * if you are in MAIN_ACCESS. + * if you are in MAIN_ACCESS. */ addr = BANK(denali->flash_bank) | denali->page; - cmd = MODE_10 | addr; + cmd = MODE_10 | addr; index_addr(denali, (uint32_t)cmd, MAIN_ACCESS); #if DEBUG_DENALI spin_lock_irq(&denali->irq_lock); - denali->irq_debug_array[denali->idx++] = 0x60000000 | mtd->oobsize; + denali->irq_debug_array[denali->idx++] = + 0x60000000 | mtd->oobsize; denali->idx %= 32; spin_unlock_irq(&denali->irq_lock); #endif } } -/* this function examines buffers to see if they contain data that +/* this function examines buffers to see if they contain data that * indicate that the buffer is part of an erased region of flash. */ bool is_erased(uint8_t *buf, int len) { int i = 0; for (i = 0; i < len; i++) - { if (buf[i] != 0xFF) - { return false; - } - } return true; } #define ECC_SECTOR_SIZE 512 @@ -1358,65 +1033,59 @@ bool is_erased(uint8_t *buf, int len) #define ECC_ERR_DEVICE(x) ((x) & ERR_CORRECTION_INFO__DEVICE_NR >> 8) #define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO) -static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, +static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, uint8_t *oobbuf, uint32_t irq_status) { bool check_erased_page = false; - if (irq_status & INTR_STATUS0__ECC_ERR) - { + if (irq_status & INTR_STATUS0__ECC_ERR) { /* read the ECC errors. we'll ignore them for now */ uint32_t err_address = 0, err_correction_info = 0; uint32_t err_byte = 0, err_sector = 0, err_device = 0; uint32_t err_correction_value = 0; - do - { - err_address = ioread32(denali->flash_reg + + do { + err_address = ioread32(denali->flash_reg + ECC_ERROR_ADDRESS); err_sector = ECC_SECTOR(err_address); err_byte = ECC_BYTE(err_address); - err_correction_info = ioread32(denali->flash_reg + + err_correction_info = ioread32(denali->flash_reg + ERR_CORRECTION_INFO); - err_correction_value = + err_correction_value = ECC_CORRECTION_VALUE(err_correction_info); err_device = ECC_ERR_DEVICE(err_correction_info); - if (ECC_ERROR_CORRECTABLE(err_correction_info)) - { + if (ECC_ERROR_CORRECTABLE(err_correction_info)) { /* offset in our buffer is computed as: - sector number * sector size + offset in + sector number * sector size + offset in sector */ - int offset = err_sector * ECC_SECTOR_SIZE + + int offset = err_sector * ECC_SECTOR_SIZE + err_byte; - if (offset < denali->mtd.writesize) - { + if (offset < denali->mtd.writesize) { /* correct the ECC error */ buf[offset] ^= err_correction_value; denali->mtd.ecc_stats.corrected++; - } - else - { + } else { /* bummer, couldn't correct the error */ printk(KERN_ERR "ECC offset invalid\n"); denali->mtd.ecc_stats.failed++; } - } - else - { - /* if the error is not correctable, need to - * look at the page to see if it is an erased page. - * if so, then it's not a real ECC error */ + } else { + /* if the error is not correctable, need to + * look at the page to see if it is an erased + * page. if so, then it's not a real ECC error + * */ check_erased_page = true; } -#if DEBUG_DENALI - printk("Detected ECC error in page %d: err_addr = 0x%08x," - " info to fix is 0x%08x\n", denali->page, err_address, - err_correction_info); +#if DEBUG_DENALI + printk(KERN_INFO "Detected ECC error in page %d:" + " err_addr = 0x%08x, info to fix is" + " 0x%08x\n", denali->page, err_address, + err_correction_info); #endif } while (!ECC_LAST_ERR(err_correction_info)); } @@ -1428,7 +1097,8 @@ static void denali_enable_dma(struct denali_nand_info *denali, bool en) { uint32_t reg_val = 0x0; - if (en) reg_val = DMA_ENABLE__FLAG; + if (en) + reg_val = DMA_ENABLE__FLAG; denali_write32(reg_val, denali->flash_reg + DMA_ENABLE); ioread32(denali->flash_reg + DMA_ENABLE); @@ -1458,9 +1128,9 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op) index_addr(denali, mode | 0x14000, 0x2400); } -/* writes a page. user specifies type, and this function handles the +/* writes a page. user specifies type, and this function handles the configuration details. */ -static void write_page(struct mtd_info *mtd, struct nand_chip *chip, +static void write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, bool raw_xfer) { struct denali_nand_info *denali = mtd_to_denali(mtd); @@ -1470,7 +1140,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, size_t size = denali->mtd.writesize + denali->mtd.oobsize; uint32_t irq_status = 0; - uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP | + uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP | INTR_STATUS0__PROGRAM_FAIL; /* if it is a raw xfer, we want to disable ecc, and send @@ -1483,74 +1153,73 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, /* copy buffer into DMA buffer */ memcpy(denali->buf.buf, buf, mtd->writesize); - if (raw_xfer) - { + if (raw_xfer) { /* transfer the data to the spare area */ - memcpy(denali->buf.buf + mtd->writesize, - chip->oob_poi, - mtd->oobsize); + memcpy(denali->buf.buf + mtd->writesize, + chip->oob_poi, + mtd->oobsize); } pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_TODEVICE); clear_interrupts(denali); - denali_enable_dma(denali, true); + denali_enable_dma(denali, true); denali_setup_dma(denali, DENALI_WRITE); /* wait for operation to complete */ irq_status = wait_for_irq(denali, irq_mask); - if (irq_status == 0) - { - printk(KERN_ERR "timeout on write_page (type = %d)\n", raw_xfer); - denali->status = - (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? NAND_STATUS_FAIL : - PASS; + if (irq_status == 0) { + printk(KERN_ERR "timeout on write_page" + " (type = %d)\n", raw_xfer); + denali->status = + (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? + NAND_STATUS_FAIL : PASS; } - denali_enable_dma(denali, false); + denali_enable_dma(denali, false); pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_TODEVICE); } /* NAND core entry points */ -/* this is the callback that the NAND core calls to write a page. Since - writing a page with ECC or without is similar, all the work is done +/* this is the callback that the NAND core calls to write a page. Since + writing a page with ECC or without is similar, all the work is done by write_page above. */ -static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, +static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf) { /* for regular page writes, we let HW handle all the ECC - * data written to the device. */ + * data written to the device. */ write_page(mtd, chip, buf, false); } -/* This is the callback that the NAND core calls to write a page without ECC. +/* This is the callback that the NAND core calls to write a page without ECC. raw access is similiar to ECC page writes, so all the work is done in the - write_page() function above. + write_page() function above. */ -static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, +static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf) { - /* for raw page writes, we want to disable ECC and simply write + /* for raw page writes, we want to disable ECC and simply write whatever data is in the buffer. */ write_page(mtd, chip, buf, true); } -static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, +static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) { - return write_oob_data(mtd, chip->oob_poi, page); + return write_oob_data(mtd, chip->oob_poi, page); } -static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, +static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page, int sndcmd) { read_oob_data(mtd, chip->oob_poi, page); - return 0; /* notify NAND core to send command to - * NAND device. */ + return 0; /* notify NAND core to send command to + NAND device. */ } static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, @@ -1563,7 +1232,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, size_t size = denali->mtd.writesize + denali->mtd.oobsize; uint32_t irq_status = 0; - uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE | + uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE | INTR_STATUS0__ECC_ERR; bool check_erased_page = false; @@ -1581,26 +1250,20 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE); memcpy(buf, denali->buf.buf, mtd->writesize); - + check_erased_page = handle_ecc(denali, buf, chip->oob_poi, irq_status); denali_enable_dma(denali, false); - if (check_erased_page) - { + if (check_erased_page) { read_oob_data(&denali->mtd, chip->oob_poi, denali->page); /* check ECC failures that may have occurred on erased pages */ - if (check_erased_page) - { + if (check_erased_page) { if (!is_erased(buf, denali->mtd.writesize)) - { denali->mtd.ecc_stats.failed++; - } if (!is_erased(buf, denali->mtd.oobsize)) - { denali->mtd.ecc_stats.failed++; - } - } + } } return 0; } @@ -1616,7 +1279,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, uint32_t irq_status = 0; uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP; - + setup_ecc_for_xfer(denali, false, true); denali_enable_dma(denali, true); @@ -1644,12 +1307,10 @@ static uint8_t denali_read_byte(struct mtd_info *mtd) uint8_t result = 0xff; if (denali->buf.head < denali->buf.tail) - { result = denali->buf.buf[denali->buf.head++]; - } #if DEBUG_DENALI - printk("read byte -> 0x%02x\n", result); + printk(KERN_INFO "read byte -> 0x%02x\n", result); #endif return result; } @@ -1658,7 +1319,7 @@ static void denali_select_chip(struct mtd_info *mtd, int chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); #if DEBUG_DENALI - printk("denali select chip %d\n", chip); + printk(KERN_INFO "denali select chip %d\n", chip); #endif spin_lock_irq(&denali->irq_lock); denali->flash_bank = chip; @@ -1672,7 +1333,7 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) denali->status = 0; #if DEBUG_DENALI - printk("waitfunc %d\n", status); + printk(KERN_INFO "waitfunc %d\n", status); #endif return status; } @@ -1684,76 +1345,74 @@ static void denali_erase(struct mtd_info *mtd, int page) uint32_t cmd = 0x0, irq_status = 0; #if DEBUG_DENALI - printk("erase page: %d\n", page); + printk(KERN_INFO "erase page: %d\n", page); #endif /* clear interrupts */ - clear_interrupts(denali); + clear_interrupts(denali); /* setup page read request for access type */ cmd = MODE_10 | BANK(denali->flash_bank) | page; index_addr(denali, (uint32_t)cmd, 0x1); /* wait for erase to complete or failure to occur */ - irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP | + irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP | INTR_STATUS0__ERASE_FAIL); - denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ? NAND_STATUS_FAIL : - PASS; + denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ? + NAND_STATUS_FAIL : PASS; } -static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, +static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t addr, id; + int i; #if DEBUG_DENALI - printk("cmdfunc: 0x%x %d %d\n", cmd, col, page); + printk(KERN_INFO "cmdfunc: 0x%x %d %d\n", cmd, col, page); #endif - switch (cmd) - { - case NAND_CMD_PAGEPROG: - break; - case NAND_CMD_STATUS: - read_status(denali); - break; - case NAND_CMD_READID: - reset_buf(denali); - if (denali->flash_bank < denali->total_used_banks) - { - /* write manufacturer information into nand - buffer for NAND subsystem to fetch. - */ - write_byte_to_buf(denali, denali->dev_info.wDeviceMaker); - write_byte_to_buf(denali, denali->dev_info.wDeviceID); - write_byte_to_buf(denali, denali->dev_info.bDeviceParam0); - write_byte_to_buf(denali, denali->dev_info.bDeviceParam1); - write_byte_to_buf(denali, denali->dev_info.bDeviceParam2); - } - else - { - int i; - for (i = 0; i < 5; i++) - write_byte_to_buf(denali, 0xff); - } - break; - case NAND_CMD_READ0: - case NAND_CMD_SEQIN: - denali->page = page; - break; - case NAND_CMD_RESET: - reset_bank(denali); - break; - case NAND_CMD_READOOB: - /* TODO: Read OOB data */ - break; - default: - printk(KERN_ERR ": unsupported command received 0x%x\n", cmd); - break; + switch (cmd) { + case NAND_CMD_PAGEPROG: + break; + case NAND_CMD_STATUS: + read_status(denali); + break; + case NAND_CMD_READID: + reset_buf(denali); + /*sometimes ManufactureId read from register is not right + * e.g. some of Micron MT29F32G08QAA MLC NAND chips + * So here we send READID cmd to NAND insteand + * */ + addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); + index_addr(denali, (uint32_t)addr | 0, 0x90); + index_addr(denali, (uint32_t)addr | 1, 0); + for (i = 0; i < 5; i++) { + index_addr_read_data(denali, + (uint32_t)addr | 2, + &id); + write_byte_to_buf(denali, id); + } + break; + case NAND_CMD_READ0: + case NAND_CMD_SEQIN: + denali->page = page; + break; + case NAND_CMD_RESET: + reset_bank(denali); + break; + case NAND_CMD_READOOB: + /* TODO: Read OOB data */ + break; + default: + printk(KERN_ERR ": unsupported command" + " received 0x%x\n", cmd); + break; } } /* stubs for ECC functions not used by the NAND core */ -static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, +static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, uint8_t *ecc_code) { printk(KERN_ERR "denali_ecc_calculate called unexpectedly\n"); @@ -1761,7 +1420,7 @@ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, return -EIO; } -static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, +static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, uint8_t *read_ecc, uint8_t *calc_ecc) { printk(KERN_ERR "denali_ecc_correct called unexpectedly\n"); @@ -1779,10 +1438,18 @@ static void denali_ecc_hwctl(struct mtd_info *mtd, int mode) /* Initialization code to bring the device up to a known good state */ static void denali_hw_init(struct denali_nand_info *denali) { + /* tell driver how many bit controller will skip before + * writing ECC code in OOB, this register may be already + * set by firmware. So we read this value out. + * if this value is 0, just let it be. + * */ + denali->bbtskipbytes = ioread32(denali->flash_reg + + SPARE_AREA_SKIP_BYTES); denali_irq_init(denali); - NAND_Flash_Reset(denali); + denali_nand_reset(denali); denali_write32(0x0F, denali->flash_reg + RB_PIN_ENABLED); - denali_write32(CHIP_EN_DONT_CARE__FLAG, denali->flash_reg + CHIP_ENABLE_DONT_CARE); + denali_write32(CHIP_EN_DONT_CARE__FLAG, + denali->flash_reg + CHIP_ENABLE_DONT_CARE); denali_write32(0x0, denali->flash_reg + SPARE_AREA_SKIP_BYTES); denali_write32(0xffff, denali->flash_reg + SPARE_AREA_MARKER); @@ -1792,25 +1459,18 @@ static void denali_hw_init(struct denali_nand_info *denali) denali_write32(1, denali->flash_reg + ECC_ENABLE); } -/* ECC layout for SLC devices. Denali spec indicates SLC fixed at 4 bytes */ -#define ECC_BYTES_SLC 4 * (2048 / ECC_SECTOR_SIZE) -static struct nand_ecclayout nand_oob_slc = { - .eccbytes = 4, - .eccpos = { 0, 1, 2, 3 }, /* not used */ - .oobfree = {{ - .offset = ECC_BYTES_SLC, - .length = 64 - ECC_BYTES_SLC - }} +/* Althogh controller spec said SLC ECC is forceb to be 4bit, + * but denali controller in MRST only support 15bit and 8bit ECC + * correction + * */ +#define ECC_8BITS 14 +static struct nand_ecclayout nand_8bit_oob = { + .eccbytes = 14, }; -#define ECC_BYTES_MLC 14 * (2048 / ECC_SECTOR_SIZE) -static struct nand_ecclayout nand_oob_mlc_14bit = { - .eccbytes = 14, - .eccpos = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* not used */ - .oobfree = {{ - .offset = ECC_BYTES_MLC, - .length = 64 - ECC_BYTES_MLC - }} +#define ECC_15BITS 26 +static struct nand_ecclayout nand_15bit_oob = { + .eccbytes = 26, }; static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' }; @@ -1842,12 +1502,12 @@ void denali_drv_init(struct denali_nand_info *denali) denali->idx = 0; /* setup interrupt handler */ - /* the completion object will be used to notify + /* the completion object will be used to notify * the callee that the interrupt is done */ init_completion(&denali->complete); /* the spinlock will be used to synchronize the ISR - * with any element that might be access shared + * with any element that might be access shared * data (interrupt status) */ spin_lock_init(&denali->irq_lock); @@ -1880,13 +1540,12 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } if (id->driver_data == INTEL_CE4100) { - /* Due to a silicon limitation, we can only support - * ONFI timing mode 1 and below. - */ - if (onfi_timing_mode < -1 || onfi_timing_mode > 1) - { - printk("Intel CE4100 only supports ONFI timing mode 1 " - "or below\n"); + /* Due to a silicon limitation, we can only support + * ONFI timing mode 1 and below. + */ + if (onfi_timing_mode < -1 || onfi_timing_mode > 1) { + printk(KERN_ERR "Intel CE4100 only supports" + " ONFI timing mode 1 or below\n"); ret = -EINVAL; goto failed_enable; } @@ -1905,7 +1564,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) mem_base = csr_base + csr_len; mem_len = csr_len; nand_dbg_print(NAND_DBG_WARN, - "Spectra: No second BAR for PCI device; assuming %08Lx\n", + "Spectra: No second" + " BAR for PCI device;" + " assuming %08Lx\n", (uint64_t)csr_base); } } @@ -1913,16 +1574,16 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* Is 32-bit DMA supported? */ ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32)); - if (ret) - { + if (ret) { printk(KERN_ERR "Spectra: no usable DMA configuration\n"); goto failed_enable; } - denali->buf.dma_buf = pci_map_single(dev, denali->buf.buf, DENALI_BUF_SIZE, - PCI_DMA_BIDIRECTIONAL); + denali->buf.dma_buf = + pci_map_single(dev, denali->buf.buf, + DENALI_BUF_SIZE, + PCI_DMA_BIDIRECTIONAL); - if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) - { + if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) { printk(KERN_ERR "Spectra: failed to map DMA buffer\n"); goto failed_enable; } @@ -1970,22 +1631,11 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } /* now that our ISR is registered, we can enable interrupts */ - NAND_LLD_Enable_Disable_Interrupts(denali, true); + denali_set_intr_modes(denali, true); pci_set_drvdata(dev, denali); - NAND_Read_Device_ID(denali); - - /* MTD supported page sizes vary by kernel. We validate our - kernel supports the device here. - */ - if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) - { - ret = -ENODEV; - printk(KERN_ERR "Spectra: device size not supported by this " - "version of MTD."); - goto failed_nand; - } + denali_nand_timing_set(denali); nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:" "acc_clks: %d, re_2_we: %d, we_2_re: %d," @@ -2009,18 +1659,46 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) denali->nand.read_byte = denali_read_byte; denali->nand.waitfunc = denali_waitfunc; - /* scan for NAND devices attached to the controller + /* scan for NAND devices attached to the controller * this is the first stage in a two step process to register - * with the nand subsystem */ - if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL)) - { + * with the nand subsystem */ + if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL)) { ret = -ENXIO; goto failed_nand; } - - /* second stage of the NAND scan - * this stage requires information regarding ECC and - * bad block management. */ + + /* MTD supported page sizes vary by kernel. We validate our + * kernel supports the device here. + */ + if (denali->mtd.writesize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) { + ret = -ENODEV; + printk(KERN_ERR "Spectra: device size not supported by this " + "version of MTD."); + goto failed_nand; + } + + /* support for multi nand + * MTD known nothing about multi nand, + * so we should tell it the real pagesize + * and anything necessery + */ + denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED); + denali->nand.chipsize <<= (denali->devnum - 1); + denali->nand.page_shift += (denali->devnum - 1); + denali->nand.pagemask = (denali->nand.chipsize >> + denali->nand.page_shift) - 1; + denali->nand.bbt_erase_shift += (denali->devnum - 1); + denali->nand.phys_erase_shift = denali->nand.bbt_erase_shift; + denali->nand.chip_shift += (denali->devnum - 1); + denali->mtd.writesize <<= (denali->devnum - 1); + denali->mtd.oobsize <<= (denali->devnum - 1); + denali->mtd.erasesize <<= (denali->devnum - 1); + denali->mtd.size = denali->nand.numchips * denali->nand.chipsize; + denali->bbtskipbytes *= denali->devnum; + + /* second stage of the NAND scan + * this stage requires information regarding ECC and + * bad block management. */ /* Bad block management */ denali->nand.bbt_td = &bbt_main_descr; @@ -2030,26 +1708,57 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN; denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME; - if (denali->dev_info.MLCDevice) - { - denali->nand.ecc.layout = &nand_oob_mlc_14bit; - denali->nand.ecc.bytes = ECC_BYTES_MLC; - } - else /* SLC */ - { - denali->nand.ecc.layout = &nand_oob_slc; - denali->nand.ecc.bytes = ECC_BYTES_SLC; + /* Denali Controller only support 15bit and 8bit ECC in MRST, + * so just let controller do 15bit ECC for MLC and 8bit ECC for + * SLC if possible. + * */ + if (denali->nand.cellinfo & 0xc && + (denali->mtd.oobsize > (denali->bbtskipbytes + + ECC_15BITS * (denali->mtd.writesize / + ECC_SECTOR_SIZE)))) { + /* if MLC OOB size is large enough, use 15bit ECC*/ + denali->nand.ecc.layout = &nand_15bit_oob; + denali->nand.ecc.bytes = ECC_15BITS; + denali_write32(15, denali->flash_reg + ECC_CORRECTION); + } else if (denali->mtd.oobsize < (denali->bbtskipbytes + + ECC_8BITS * (denali->mtd.writesize / + ECC_SECTOR_SIZE))) { + printk(KERN_ERR "Your NAND chip OOB is not large enough to" + " contain 8bit ECC correction codes"); + goto failed_nand; + } else { + denali->nand.ecc.layout = &nand_8bit_oob; + denali->nand.ecc.bytes = ECC_8BITS; + denali_write32(8, denali->flash_reg + ECC_CORRECTION); } - /* These functions are required by the NAND core framework, otherwise, - the NAND core will assert. However, we don't need them, so we'll stub - them out. */ + denali->nand.ecc.bytes *= denali->devnum; + denali->nand.ecc.layout->eccbytes *= + denali->mtd.writesize / ECC_SECTOR_SIZE; + denali->nand.ecc.layout->oobfree[0].offset = + denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes; + denali->nand.ecc.layout->oobfree[0].length = + denali->mtd.oobsize - denali->nand.ecc.layout->eccbytes - + denali->bbtskipbytes; + + /* Let driver know the total blocks number and + * how many blocks contained by each nand chip. + * blksperchip will help driver to know how many + * blocks is taken by FW. + * */ + denali->totalblks = denali->mtd.size >> + denali->nand.phys_erase_shift; + denali->blksperchip = denali->totalblks / denali->nand.numchips; + + /* These functions are required by the NAND core framework, otherwise, + * the NAND core will assert. However, we don't need them, so we'll stub + * them out. */ denali->nand.ecc.calculate = denali_ecc_calculate; denali->nand.ecc.correct = denali_ecc_correct; denali->nand.ecc.hwctl = denali_ecc_hwctl; /* override the default read operations */ - denali->nand.ecc.size = denali->mtd.writesize; + denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum; denali->nand.ecc.read_page = denali_read_page; denali->nand.ecc.read_page_raw = denali_read_page_raw; denali->nand.ecc.write_page = denali_write_page; @@ -2058,15 +1767,15 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) denali->nand.ecc.write_oob = denali_write_oob; denali->nand.erase_cmd = denali_erase; - if (nand_scan_tail(&denali->mtd)) - { + if (nand_scan_tail(&denali->mtd)) { ret = -ENXIO; goto failed_nand; } ret = add_mtd_device(&denali->mtd); if (ret) { - printk(KERN_ERR "Spectra: Failed to register MTD device: %d\n", ret); + printk(KERN_ERR "Spectra: Failed to register" + " MTD device: %d\n", ret); goto failed_nand; } return 0; @@ -2079,7 +1788,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) failed_remap_csr: pci_release_regions(dev); failed_req_csr: - pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE, + pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE, PCI_DMA_BIDIRECTIONAL); failed_enable: kfree(denali); @@ -2103,7 +1812,7 @@ static void denali_pci_remove(struct pci_dev *dev) iounmap(denali->flash_mem); pci_release_regions(dev); pci_disable_device(dev); - pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE, + pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE, PCI_DMA_BIDIRECTIONAL); pci_set_drvdata(dev, NULL); kfree(denali); @@ -2120,7 +1829,8 @@ static struct pci_driver denali_pci_driver = { static int __devinit denali_init(void) { - printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n", __DATE__, __TIME__); + printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n", + __DATE__, __TIME__); return pci_register_driver(&denali_pci_driver); } diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 422a29a..b680474 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -17,7 +17,7 @@ * */ -#include <linux/mtd/nand.h> +#include <linux/mtd/nand.h> #define DEVICE_RESET 0x0 #define DEVICE_RESET__BANK0 0x0001 @@ -29,7 +29,7 @@ #define TRANSFER_SPARE_REG__FLAG 0x0001 #define LOAD_WAIT_CNT 0x20 -#define LOAD_WAIT_CNT__VALUE 0xffff +#define LOAD_WAIT_CNT__VALUE 0xffff #define PROGRAM_WAIT_CNT 0x30 #define PROGRAM_WAIT_CNT__VALUE 0xffff @@ -83,7 +83,7 @@ #define RE_2_WE 0x120 #define RE_2_WE__VALUE 0x003f -#define ACC_CLKS 0x130 +#define ACC_CLKS 0x130 #define ACC_CLKS__VALUE 0x000f #define NUMBER_OF_PLANES 0x140 @@ -140,7 +140,7 @@ #define DEVICES_CONNECTED 0x250 #define DEVICES_CONNECTED__VALUE 0x0007 -#define DIE_MASK 0x260 +#define DIE_MASK 0x260 #define DIE_MASK__VALUE 0x00ff #define FIRST_BLOCK_OF_NEXT_PLANE 0x270 @@ -152,7 +152,7 @@ #define RE_2_RE 0x290 #define RE_2_RE__VALUE 0x003f -#define MANUFACTURER_ID 0x300 +#define MANUFACTURER_ID 0x300 #define MANUFACTURER_ID__VALUE 0x00ff #define DEVICE_ID 0x310 @@ -173,13 +173,13 @@ #define LOGICAL_PAGE_SPARE_SIZE 0x360 #define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff -#define REVISION 0x370 +#define REVISION 0x370 #define REVISION__VALUE 0xffff #define ONFI_DEVICE_FEATURES 0x380 #define ONFI_DEVICE_FEATURES__VALUE 0x003f -#define ONFI_OPTIONAL_COMMANDS 0x390 +#define ONFI_OPTIONAL_COMMANDS 0x390 #define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f #define ONFI_TIMING_MODE 0x3a0 @@ -201,12 +201,12 @@ #define FEATURES 0x3f0 #define FEATURES__N_BANKS 0x0003 #define FEATURES__ECC_MAX_ERR 0x003c -#define FEATURES__DMA 0x0040 +#define FEATURES__DMA 0x0040 #define FEATURES__CMD_DMA 0x0080 #define FEATURES__PARTITION 0x0100 #define FEATURES__XDMA_SIDEBAND 0x0200 #define FEATURES__GPREG 0x0400 -#define FEATURES__INDEX_ADDR 0x0800 +#define FEATURES__INDEX_ADDR 0x0800 #define TRANSFER_MODE 0x400 #define TRANSFER_MODE__VALUE 0x0003 @@ -235,12 +235,12 @@ #define INTR_EN0__DMA_CMD_COMP 0x0004 #define INTR_EN0__TIME_OUT 0x0008 #define INTR_EN0__PROGRAM_FAIL 0x0010 -#define INTR_EN0__ERASE_FAIL 0x0020 +#define INTR_EN0__ERASE_FAIL 0x0020 #define INTR_EN0__LOAD_COMP 0x0040 #define INTR_EN0__PROGRAM_COMP 0x0080 -#define INTR_EN0__ERASE_COMP 0x0100 +#define INTR_EN0__ERASE_COMP 0x0100 #define INTR_EN0__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_EN0__LOCKED_BLK 0x0400 +#define INTR_EN0__LOCKED_BLK 0x0400 #define INTR_EN0__UNSUP_CMD 0x0800 #define INTR_EN0__INT_ACT 0x1000 #define INTR_EN0__RST_COMP 0x2000 @@ -253,7 +253,7 @@ #define ERR_PAGE_ADDR0 0x440 #define ERR_PAGE_ADDR0__VALUE 0xffff -#define ERR_BLOCK_ADDR0 0x450 +#define ERR_BLOCK_ADDR0 0x450 #define ERR_BLOCK_ADDR0__VALUE 0xffff #define INTR_STATUS1 0x460 @@ -280,12 +280,12 @@ #define INTR_EN1__DMA_CMD_COMP 0x0004 #define INTR_EN1__TIME_OUT 0x0008 #define INTR_EN1__PROGRAM_FAIL 0x0010 -#define INTR_EN1__ERASE_FAIL 0x0020 +#define INTR_EN1__ERASE_FAIL 0x0020 #define INTR_EN1__LOAD_COMP 0x0040 #define INTR_EN1__PROGRAM_COMP 0x0080 -#define INTR_EN1__ERASE_COMP 0x0100 +#define INTR_EN1__ERASE_COMP 0x0100 #define INTR_EN1__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_EN1__LOCKED_BLK 0x0400 +#define INTR_EN1__LOCKED_BLK 0x0400 #define INTR_EN1__UNSUP_CMD 0x0800 #define INTR_EN1__INT_ACT 0x1000 #define INTR_EN1__RST_COMP 0x2000 @@ -298,7 +298,7 @@ #define ERR_PAGE_ADDR1 0x490 #define ERR_PAGE_ADDR1__VALUE 0xffff -#define ERR_BLOCK_ADDR1 0x4a0 +#define ERR_BLOCK_ADDR1 0x4a0 #define ERR_BLOCK_ADDR1__VALUE 0xffff #define INTR_STATUS2 0x4b0 @@ -325,12 +325,12 @@ #define INTR_EN2__DMA_CMD_COMP 0x0004 #define INTR_EN2__TIME_OUT 0x0008 #define INTR_EN2__PROGRAM_FAIL 0x0010 -#define INTR_EN2__ERASE_FAIL 0x0020 +#define INTR_EN2__ERASE_FAIL 0x0020 #define INTR_EN2__LOAD_COMP 0x0040 #define INTR_EN2__PROGRAM_COMP 0x0080 -#define INTR_EN2__ERASE_COMP 0x0100 +#define INTR_EN2__ERASE_COMP 0x0100 #define INTR_EN2__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_EN2__LOCKED_BLK 0x0400 +#define INTR_EN2__LOCKED_BLK 0x0400 #define INTR_EN2__UNSUP_CMD 0x0800 #define INTR_EN2__INT_ACT 0x1000 #define INTR_EN2__RST_COMP 0x2000 @@ -343,7 +343,7 @@ #define ERR_PAGE_ADDR2 0x4e0 #define ERR_PAGE_ADDR2__VALUE 0xffff -#define ERR_BLOCK_ADDR2 0x4f0 +#define ERR_BLOCK_ADDR2 0x4f0 #define ERR_BLOCK_ADDR2__VALUE 0xffff #define INTR_STATUS3 0x500 @@ -370,12 +370,12 @@ #define INTR_EN3__DMA_CMD_COMP 0x0004 #define INTR_EN3__TIME_OUT 0x0008 #define INTR_EN3__PROGRAM_FAIL 0x0010 -#define INTR_EN3__ERASE_FAIL 0x0020 +#define INTR_EN3__ERASE_FAIL 0x0020 #define INTR_EN3__LOAD_COMP 0x0040 #define INTR_EN3__PROGRAM_COMP 0x0080 -#define INTR_EN3__ERASE_COMP 0x0100 +#define INTR_EN3__ERASE_COMP 0x0100 #define INTR_EN3__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_EN3__LOCKED_BLK 0x0400 +#define INTR_EN3__LOCKED_BLK 0x0400 #define INTR_EN3__UNSUP_CMD 0x0800 #define INTR_EN3__INT_ACT 0x1000 #define INTR_EN3__RST_COMP 0x2000 @@ -388,7 +388,7 @@ #define ERR_PAGE_ADDR3 0x530 #define ERR_PAGE_ADDR3__VALUE 0xffff -#define ERR_BLOCK_ADDR3 0x540 +#define ERR_BLOCK_ADDR3 0x540 #define ERR_BLOCK_ADDR3__VALUE 0xffff #define DATA_INTR 0x550 @@ -412,9 +412,9 @@ #define GPREG_3__VALUE 0xffff #define ECC_THRESHOLD 0x600 -#define ECC_THRESHOLD__VALUE 0x03ff +#define ECC_THRESHOLD__VALUE 0x03ff -#define ECC_ERROR_BLOCK_ADDRESS 0x610 +#define ECC_ERROR_BLOCK_ADDRESS 0x610 #define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff #define ECC_ERROR_PAGE_ADDRESS 0x620 @@ -466,7 +466,7 @@ #define CHNL_ACTIVE__CHANNEL3 0x0008 #define ACTIVE_SRC_ID 0x800 -#define ACTIVE_SRC_ID__VALUE 0x00ff +#define ACTIVE_SRC_ID__VALUE 0x00ff #define PTN_INTR 0x810 #define PTN_INTR__CONFIG_ERROR 0x0001 @@ -485,7 +485,7 @@ #define PTN_INTR_EN__REG_ACCESS_ERROR 0x0020 #define PERM_SRC_ID_0 0x830 -#define PERM_SRC_ID_0__SRCID 0x00ff +#define PERM_SRC_ID_0__SRCID 0x00ff #define PERM_SRC_ID_0__DIRECT_ACCESS_ACTIVE 0x0800 #define PERM_SRC_ID_0__WRITE_ACTIVE 0x2000 #define PERM_SRC_ID_0__READ_ACTIVE 0x4000 @@ -502,7 +502,7 @@ #define MIN_MAX_BANK_0__MAX_VALUE 0x000c #define PERM_SRC_ID_1 0x870 -#define PERM_SRC_ID_1__SRCID 0x00ff +#define PERM_SRC_ID_1__SRCID 0x00ff #define PERM_SRC_ID_1__DIRECT_ACCESS_ACTIVE 0x0800 #define PERM_SRC_ID_1__WRITE_ACTIVE 0x2000 #define PERM_SRC_ID_1__READ_ACTIVE 0x4000 @@ -519,7 +519,7 @@ #define MIN_MAX_BANK_1__MAX_VALUE 0x000c #define PERM_SRC_ID_2 0x8b0 -#define PERM_SRC_ID_2__SRCID 0x00ff +#define PERM_SRC_ID_2__SRCID 0x00ff #define PERM_SRC_ID_2__DIRECT_ACCESS_ACTIVE 0x0800 #define PERM_SRC_ID_2__WRITE_ACTIVE 0x2000 #define PERM_SRC_ID_2__READ_ACTIVE 0x4000 @@ -536,7 +536,7 @@ #define MIN_MAX_BANK_2__MAX_VALUE 0x000c #define PERM_SRC_ID_3 0x8f0 -#define PERM_SRC_ID_3__SRCID 0x00ff +#define PERM_SRC_ID_3__SRCID 0x00ff #define PERM_SRC_ID_3__DIRECT_ACCESS_ACTIVE 0x0800 #define PERM_SRC_ID_3__WRITE_ACTIVE 0x2000 #define PERM_SRC_ID_3__READ_ACTIVE 0x4000 @@ -553,7 +553,7 @@ #define MIN_MAX_BANK_3__MAX_VALUE 0x000c #define PERM_SRC_ID_4 0x930 -#define PERM_SRC_ID_4__SRCID 0x00ff +#define PERM_SRC_ID_4__SRCID 0x00ff #define PERM_SRC_ID_4__DIRECT_ACCESS_ACTIVE 0x0800 #define PERM_SRC_ID_4__WRITE_ACTIVE 0x2000 #define PERM_SRC_ID_4__READ_ACTIVE 0x4000 @@ -570,7 +570,7 @@ #define MIN_MAX_BANK_4__MAX_VALUE 0x000c #define PERM_SRC_ID_5 0x970 -#define PERM_SRC_ID_5__SRCID 0x00ff +#define PERM_SRC_ID_5__SRCID 0x00ff #define PERM_SRC_ID_5__DIRECT_ACCESS_ACTIVE 0x0800 #define PERM_SRC_ID_5__WRITE_ACTIVE 0x2000 #define PERM_SRC_ID_5__READ_ACTIVE 0x4000 @@ -587,7 +587,7 @@ #define MIN_MAX_BANK_5__MAX_VALUE 0x000c #define PERM_SRC_ID_6 0x9b0 -#define PERM_SRC_ID_6__SRCID 0x00ff +#define PERM_SRC_ID_6__SRCID 0x00ff #define PERM_SRC_ID_6__DIRECT_ACCESS_ACTIVE 0x0800 #define PERM_SRC_ID_6__WRITE_ACTIVE 0x2000 #define PERM_SRC_ID_6__READ_ACTIVE 0x4000 @@ -604,7 +604,7 @@ #define MIN_MAX_BANK_6__MAX_VALUE 0x000c #define PERM_SRC_ID_7 0x9f0 -#define PERM_SRC_ID_7__SRCID 0x00ff +#define PERM_SRC_ID_7__SRCID 0x00ff #define PERM_SRC_ID_7__DIRECT_ACCESS_ACTIVE 0x0800 #define PERM_SRC_ID_7__WRITE_ACTIVE 0x2000 #define PERM_SRC_ID_7__READ_ACTIVE 0x4000 @@ -620,47 +620,6 @@ #define MIN_MAX_BANK_7__MIN_VALUE 0x0003 #define MIN_MAX_BANK_7__MAX_VALUE 0x000c -/* flash.h */ -struct device_info_tag { - uint16_t wDeviceMaker; - uint16_t wDeviceID; - uint8_t bDeviceParam0; - uint8_t bDeviceParam1; - uint8_t bDeviceParam2; - uint32_t wDeviceType; - uint32_t wSpectraStartBlock; - uint32_t wSpectraEndBlock; - uint32_t wTotalBlocks; - uint16_t wPagesPerBlock; - uint16_t wPageSize; - uint16_t wPageDataSize; - uint16_t wPageSpareSize; - uint16_t wNumPageSpareFlag; - uint16_t wECCBytesPerSector; - uint32_t wBlockSize; - uint32_t wBlockDataSize; - uint32_t wDataBlockNum; - uint8_t bPlaneNum; - uint16_t wDeviceMainAreaSize; - uint16_t wDeviceSpareAreaSize; - uint16_t wDevicesConnected; - uint16_t wDeviceWidth; - uint16_t wHWRevision; - uint16_t wHWFeatures; - - uint16_t wONFIDevFeatures; - uint16_t wONFIOptCommands; - uint16_t wONFITimingMode; - uint16_t wONFIPgmCacheTimingMode; - - uint16_t MLCDevice; - uint16_t wSpareSkipBytes; - - uint8_t nBitsInPageNumber; - uint8_t nBitsInPageDataSize; - uint8_t nBitsInBlockDataSize; -}; - /* ffsdefs.h */ #define CLEAR 0 /*use this to clear a field instead of "fail"*/ #define SET 1 /*use this to set a field instead of "pass"*/ @@ -684,11 +643,11 @@ struct device_info_tag { #define NAND_DBG_TRACE 3 #ifdef VERBOSE -#define nand_dbg_print(level, args...) \ - do { \ - if (level <= nand_debug_level) \ - printk(KERN_ALERT args); \ - } while (0) +#define nand_dbg_print(level, args...) \ + do { \ + if (level <= nand_debug_level) \ + printk(KERN_ALERT args); \ + } while (0) #else #define nand_dbg_print(level, args...) #endif @@ -772,10 +731,9 @@ struct device_info_tag { #define ECC_SECTOR_SIZE 512 #define LLD_MAX_FLASH_BANKS 4 -#define DENALI_BUF_SIZE NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE +#define DENALI_BUF_SIZE (NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) -struct nand_buf -{ +struct nand_buf { int head; int tail; uint8_t buf[DENALI_BUF_SIZE]; @@ -788,7 +746,6 @@ struct nand_buf struct denali_nand_info { struct mtd_info mtd; struct nand_chip nand; - struct device_info_tag dev_info; int flash_bank; /* currently selected chip */ int status; int platform; @@ -806,11 +763,12 @@ struct denali_nand_info { uint32_t irq_status; int irq_debug_array[32]; int idx; -}; -static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali); -static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali); -static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali, uint16_t INT_ENABLE); + uint32_t devnum; /* represent how many nands connected */ + uint32_t fwblks; /* represent how many blocks FW used */ + uint32_t totalblks; + uint32_t blksperchip; + uint32_t bbtskipbytes; +}; #endif /*_LLD_NAND_*/ - diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 47067bc..b7f8de7 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -29,7 +29,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/doc2000.h> -#include <linux/mtd/compatmac.h> #include <linux/mtd/partitions.h> #include <linux/mtd/inftl.h> @@ -146,6 +145,7 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc) uint8_t parity; uint16_t ds[4], s[5], tmp, errval[8], syn[4]; + memset(syn, 0, sizeof(syn)); /* Convert the ecc bytes into words */ ds[0] = ((ecc[4] & 0xff) >> 0) | ((ecc[5] & 0x03) << 8); ds[1] = ((ecc[5] & 0xfc) >> 2) | ((ecc[2] & 0x0f) << 6); @@ -169,9 +169,9 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc) s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)]; } - /* Calc s[i] = s[i] / alpha^(v + i) */ + /* Calc syn[i] = s[i] / alpha^(v + i) */ for (i = 0; i < NROOTS; i++) { - if (syn[i]) + if (s[i]) syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i)); } /* Call the decoder library */ diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 0d76b16..fcf8ceb 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -39,60 +39,96 @@ #define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35()) #define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21()) +#define nfc_is_v3_2() cpu_is_mx51() +#define nfc_is_v3() nfc_is_v3_2() /* Addresses for NFC registers */ -#define NFC_BUF_SIZE 0xE00 -#define NFC_BUF_ADDR 0xE04 -#define NFC_FLASH_ADDR 0xE06 -#define NFC_FLASH_CMD 0xE08 -#define NFC_CONFIG 0xE0A -#define NFC_ECC_STATUS_RESULT 0xE0C -#define NFC_RSLTMAIN_AREA 0xE0E -#define NFC_RSLTSPARE_AREA 0xE10 -#define NFC_WRPROT 0xE12 -#define NFC_V1_UNLOCKSTART_BLKADDR 0xe14 -#define NFC_V1_UNLOCKEND_BLKADDR 0xe16 -#define NFC_V21_UNLOCKSTART_BLKADDR 0xe20 -#define NFC_V21_UNLOCKEND_BLKADDR 0xe22 -#define NFC_NF_WRPRST 0xE18 -#define NFC_CONFIG1 0xE1A -#define NFC_CONFIG2 0xE1C - -/* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register - * for Command operation */ -#define NFC_CMD 0x1 - -/* Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register - * for Address operation */ -#define NFC_ADDR 0x2 - -/* Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register - * for Input operation */ -#define NFC_INPUT 0x4 - -/* Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register - * for Data Output operation */ -#define NFC_OUTPUT 0x8 - -/* Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register - * for Read ID operation */ -#define NFC_ID 0x10 - -/* Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register - * for Read Status operation */ -#define NFC_STATUS 0x20 - -/* Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read - * Status operation */ -#define NFC_INT 0x8000 - -#define NFC_SP_EN (1 << 2) -#define NFC_ECC_EN (1 << 3) -#define NFC_INT_MSK (1 << 4) -#define NFC_BIG (1 << 5) -#define NFC_RST (1 << 6) -#define NFC_CE (1 << 7) -#define NFC_ONE_CYCLE (1 << 8) +#define NFC_V1_V2_BUF_SIZE (host->regs + 0x00) +#define NFC_V1_V2_BUF_ADDR (host->regs + 0x04) +#define NFC_V1_V2_FLASH_ADDR (host->regs + 0x06) +#define NFC_V1_V2_FLASH_CMD (host->regs + 0x08) +#define NFC_V1_V2_CONFIG (host->regs + 0x0a) +#define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c) +#define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e) +#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10) +#define NFC_V1_V2_WRPROT (host->regs + 0x12) +#define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14) +#define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16) +#define NFC_V21_UNLOCKSTART_BLKADDR (host->regs + 0x20) +#define NFC_V21_UNLOCKEND_BLKADDR (host->regs + 0x22) +#define NFC_V1_V2_NF_WRPRST (host->regs + 0x18) +#define NFC_V1_V2_CONFIG1 (host->regs + 0x1a) +#define NFC_V1_V2_CONFIG2 (host->regs + 0x1c) + +#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0) +#define NFC_V1_V2_CONFIG1_SP_EN (1 << 2) +#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3) +#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4) +#define NFC_V1_V2_CONFIG1_BIG (1 << 5) +#define NFC_V1_V2_CONFIG1_RST (1 << 6) +#define NFC_V1_V2_CONFIG1_CE (1 << 7) +#define NFC_V1_V2_CONFIG1_ONE_CYCLE (1 << 8) + +#define NFC_V1_V2_CONFIG2_INT (1 << 15) + +/* + * Operation modes for the NFC. Valid for v1, v2 and v3 + * type controllers. + */ +#define NFC_CMD (1 << 0) +#define NFC_ADDR (1 << 1) +#define NFC_INPUT (1 << 2) +#define NFC_OUTPUT (1 << 3) +#define NFC_ID (1 << 4) +#define NFC_STATUS (1 << 5) + +#define NFC_V3_FLASH_CMD (host->regs_axi + 0x00) +#define NFC_V3_FLASH_ADDR0 (host->regs_axi + 0x04) + +#define NFC_V3_CONFIG1 (host->regs_axi + 0x34) +#define NFC_V3_CONFIG1_SP_EN (1 << 0) +#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7 ) << 4) + +#define NFC_V3_ECC_STATUS_RESULT (host->regs_axi + 0x38) + +#define NFC_V3_LAUNCH (host->regs_axi + 0x40) + +#define NFC_V3_WRPROT (host->regs_ip + 0x0) +#define NFC_V3_WRPROT_LOCK_TIGHT (1 << 0) +#define NFC_V3_WRPROT_LOCK (1 << 1) +#define NFC_V3_WRPROT_UNLOCK (1 << 2) +#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6) + +#define NFC_V3_WRPROT_UNLOCK_BLK_ADD0 (host->regs_ip + 0x04) + +#define NFC_V3_CONFIG2 (host->regs_ip + 0x24) +#define NFC_V3_CONFIG2_PS_512 (0 << 0) +#define NFC_V3_CONFIG2_PS_2048 (1 << 0) +#define NFC_V3_CONFIG2_PS_4096 (2 << 0) +#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2) +#define NFC_V3_CONFIG2_ECC_EN (1 << 3) +#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4) +#define NFC_V3_CONFIG2_NUM_ADDR_PHASE0 (1 << 5) +#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6) +#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7) +#define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x) (((x) & 0x3) << 12) +#define NFC_V3_CONFIG2_INT_MSK (1 << 15) +#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24) +#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16) + +#define NFC_V3_CONFIG3 (host->regs_ip + 0x28) +#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0) +#define NFC_V3_CONFIG3_FW8 (1 << 3) +#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8) +#define NFC_V3_CONFIG3_NUM_OF_DEVICES(x) (((x) & 0x7) << 12) +#define NFC_V3_CONFIG3_RBB_MODE (1 << 15) +#define NFC_V3_CONFIG3_NO_SDMA (1 << 20) + +#define NFC_V3_IPC (host->regs_ip + 0x2C) +#define NFC_V3_IPC_CREQ (1 << 0) +#define NFC_V3_IPC_INT (1 << 31) + +#define NFC_V3_DELAY_LINE (host->regs_ip + 0x34) struct mxc_nand_host { struct mtd_info mtd; @@ -102,20 +138,30 @@ struct mxc_nand_host { void *spare0; void *main_area0; - void *main_area1; void __iomem *base; void __iomem *regs; + void __iomem *regs_axi; + void __iomem *regs_ip; int status_request; struct clk *clk; int clk_act; int irq; + int eccsize; wait_queue_head_t irq_waitq; uint8_t *data_buf; unsigned int buf_start; int spare_len; + + void (*preset)(struct mtd_info *); + void (*send_cmd)(struct mxc_nand_host *, uint16_t, int); + void (*send_addr)(struct mxc_nand_host *, uint16_t, int); + void (*send_page)(struct mtd_info *, unsigned int); + void (*send_read_id)(struct mxc_nand_host *); + uint16_t (*get_dev_status)(struct mxc_nand_host *); + int (*check_int)(struct mxc_nand_host *); }; /* OOB placement block for use with hardware ecc generation */ @@ -175,34 +221,52 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id) return IRQ_HANDLED; } +static int check_int_v3(struct mxc_nand_host *host) +{ + uint32_t tmp; + + tmp = readl(NFC_V3_IPC); + if (!(tmp & NFC_V3_IPC_INT)) + return 0; + + tmp &= ~NFC_V3_IPC_INT; + writel(tmp, NFC_V3_IPC); + + return 1; +} + +static int check_int_v1_v2(struct mxc_nand_host *host) +{ + uint32_t tmp; + + tmp = readw(NFC_V1_V2_CONFIG2); + if (!(tmp & NFC_V1_V2_CONFIG2_INT)) + return 0; + + writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2); + + return 1; +} + /* This function polls the NANDFC to wait for the basic operation to * complete by checking the INT bit of config2 register. */ static void wait_op_done(struct mxc_nand_host *host, int useirq) { - uint16_t tmp; int max_retries = 8000; if (useirq) { - if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) { + if (!host->check_int(host)) { enable_irq(host->irq); - wait_event(host->irq_waitq, - readw(host->regs + NFC_CONFIG2) & NFC_INT); - - tmp = readw(host->regs + NFC_CONFIG2); - tmp &= ~NFC_INT; - writew(tmp, host->regs + NFC_CONFIG2); + wait_event(host->irq_waitq, host->check_int(host)); } } else { while (max_retries-- > 0) { - if (readw(host->regs + NFC_CONFIG2) & NFC_INT) { - tmp = readw(host->regs + NFC_CONFIG2); - tmp &= ~NFC_INT; - writew(tmp, host->regs + NFC_CONFIG2); + if (host->check_int(host)) break; - } + udelay(1); } if (max_retries < 0) @@ -211,21 +275,33 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq) } } +static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq) +{ + /* fill command */ + writel(cmd, NFC_V3_FLASH_CMD); + + /* send out command */ + writel(NFC_CMD, NFC_V3_LAUNCH); + + /* Wait for operation to complete */ + wait_op_done(host, useirq); +} + /* This function issues the specified command to the NAND device and * waits for completion. */ -static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq) +static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq) { DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq); - writew(cmd, host->regs + NFC_FLASH_CMD); - writew(NFC_CMD, host->regs + NFC_CONFIG2); + writew(cmd, NFC_V1_V2_FLASH_CMD); + writew(NFC_CMD, NFC_V1_V2_CONFIG2); if (cpu_is_mx21() && (cmd == NAND_CMD_RESET)) { int max_retries = 100; /* Reset completion is indicated by NFC_CONFIG2 */ /* being set to 0 */ while (max_retries-- > 0) { - if (readw(host->regs + NFC_CONFIG2) == 0) { + if (readw(NFC_V1_V2_CONFIG2) == 0) { break; } udelay(1); @@ -239,21 +315,48 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq) } } +static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast) +{ + /* fill address */ + writel(addr, NFC_V3_FLASH_ADDR0); + + /* send out address */ + writel(NFC_ADDR, NFC_V3_LAUNCH); + + wait_op_done(host, 0); +} + /* This function sends an address (or partial address) to the * NAND device. The address is used to select the source/destination for * a NAND command. */ -static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast) +static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast) { DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast); - writew(addr, host->regs + NFC_FLASH_ADDR); - writew(NFC_ADDR, host->regs + NFC_CONFIG2); + writew(addr, NFC_V1_V2_FLASH_ADDR); + writew(NFC_ADDR, NFC_V1_V2_CONFIG2); /* Wait for operation to complete */ wait_op_done(host, islast); } -static void send_page(struct mtd_info *mtd, unsigned int ops) +static void send_page_v3(struct mtd_info *mtd, unsigned int ops) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + uint32_t tmp; + + tmp = readl(NFC_V3_CONFIG1); + tmp &= ~(7 << 4); + writel(tmp, NFC_V3_CONFIG1); + + /* transfer data from NFC ram to nand */ + writel(ops, NFC_V3_LAUNCH); + + wait_op_done(host, false); +} + +static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; @@ -267,24 +370,34 @@ static void send_page(struct mtd_info *mtd, unsigned int ops) for (i = 0; i < bufs; i++) { /* NANDFC buffer 0 is used for page read/write */ - writew(i, host->regs + NFC_BUF_ADDR); + writew(i, NFC_V1_V2_BUF_ADDR); - writew(ops, host->regs + NFC_CONFIG2); + writew(ops, NFC_V1_V2_CONFIG2); /* Wait for operation to complete */ wait_op_done(host, true); } } +static void send_read_id_v3(struct mxc_nand_host *host) +{ + /* Read ID into main buffer */ + writel(NFC_ID, NFC_V3_LAUNCH); + + wait_op_done(host, true); + + memcpy(host->data_buf, host->main_area0, 16); +} + /* Request the NANDFC to perform a read of the NAND device ID. */ -static void send_read_id(struct mxc_nand_host *host) +static void send_read_id_v1_v2(struct mxc_nand_host *host) { struct nand_chip *this = &host->nand; /* NANDFC buffer 0 is used for device ID output */ - writew(0x0, host->regs + NFC_BUF_ADDR); + writew(0x0, NFC_V1_V2_BUF_ADDR); - writew(NFC_ID, host->regs + NFC_CONFIG2); + writew(NFC_ID, NFC_V1_V2_CONFIG2); /* Wait for operation to complete */ wait_op_done(host, true); @@ -301,29 +414,36 @@ static void send_read_id(struct mxc_nand_host *host) memcpy(host->data_buf, host->main_area0, 16); } +static uint16_t get_dev_status_v3(struct mxc_nand_host *host) +{ + writew(NFC_STATUS, NFC_V3_LAUNCH); + wait_op_done(host, true); + + return readl(NFC_V3_CONFIG1) >> 16; +} + /* This function requests the NANDFC to perform a read of the * NAND device status and returns the current status. */ -static uint16_t get_dev_status(struct mxc_nand_host *host) +static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host) { - void __iomem *main_buf = host->main_area1; + void __iomem *main_buf = host->main_area0; uint32_t store; uint16_t ret; - /* Issue status request to NAND device */ - /* store the main area1 first word, later do recovery */ - store = readl(main_buf); - /* NANDFC buffer 1 is used for device status to prevent - * corruption of read/write buffer on status requests. */ - writew(1, host->regs + NFC_BUF_ADDR); + writew(0x0, NFC_V1_V2_BUF_ADDR); - writew(NFC_STATUS, host->regs + NFC_CONFIG2); + /* + * The device status is stored in main_area0. To + * prevent corruption of the buffer save the value + * and restore it afterwards. + */ + store = readl(main_buf); - /* Wait for operation to complete */ + writew(NFC_STATUS, NFC_V1_V2_CONFIG2); wait_op_done(host, true); - /* Status is placed in first word of main buffer */ - /* get status, then recovery area 1 data */ ret = readw(main_buf); + writel(store, main_buf); return ret; @@ -347,7 +467,7 @@ static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode) */ } -static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, +static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) { struct nand_chip *nand_chip = mtd->priv; @@ -358,7 +478,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, * additional correction. 2-Bit errors cannot be corrected by * HW ECC, so we need to return failure */ - uint16_t ecc_status = readw(host->regs + NFC_ECC_STATUS_RESULT); + uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT); if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) { DEBUG(MTD_DEBUG_LEVEL0, @@ -369,6 +489,43 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, return 0; } +static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + u32 ecc_stat, err; + int no_subpages = 1; + int ret = 0; + u8 ecc_bit_mask, err_limit; + + ecc_bit_mask = (host->eccsize == 4) ? 0x7 : 0xf; + err_limit = (host->eccsize == 4) ? 0x4 : 0x8; + + no_subpages = mtd->writesize >> 9; + + if (nfc_is_v21()) + ecc_stat = readl(NFC_V1_V2_ECC_STATUS_RESULT); + else + ecc_stat = readl(NFC_V3_ECC_STATUS_RESULT); + + do { + err = ecc_stat & ecc_bit_mask; + if (err > err_limit) { + printk(KERN_WARNING "UnCorrectable RS-ECC Error\n"); + return -1; + } else { + ret += err; + } + ecc_stat >>= 4; + } while (--no_subpages); + + mtd->ecc_stats.corrected += ret; + pr_debug("%d Symbol Correctable RS-ECC Error\n", ret); + + return ret; +} + static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { @@ -383,7 +540,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd) /* Check for status request */ if (host->status_request) - return get_dev_status(host) & 0xFF; + return host->get_dev_status(host) & 0xFF; ret = *(uint8_t *)(host->data_buf + host->buf_start); host->buf_start++; @@ -519,71 +676,163 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) * we will used the saved column address to index into * the full page. */ - send_addr(host, 0, page_addr == -1); + host->send_addr(host, 0, page_addr == -1); if (mtd->writesize > 512) /* another col addr cycle for 2k page */ - send_addr(host, 0, false); + host->send_addr(host, 0, false); } /* Write out page address, if necessary */ if (page_addr != -1) { /* paddr_0 - p_addr_7 */ - send_addr(host, (page_addr & 0xff), false); + host->send_addr(host, (page_addr & 0xff), false); if (mtd->writesize > 512) { if (mtd->size >= 0x10000000) { /* paddr_8 - paddr_15 */ - send_addr(host, (page_addr >> 8) & 0xff, false); - send_addr(host, (page_addr >> 16) & 0xff, true); + host->send_addr(host, (page_addr >> 8) & 0xff, false); + host->send_addr(host, (page_addr >> 16) & 0xff, true); } else /* paddr_8 - paddr_15 */ - send_addr(host, (page_addr >> 8) & 0xff, true); + host->send_addr(host, (page_addr >> 8) & 0xff, true); } else { /* One more address cycle for higher density devices */ if (mtd->size >= 0x4000000) { /* paddr_8 - paddr_15 */ - send_addr(host, (page_addr >> 8) & 0xff, false); - send_addr(host, (page_addr >> 16) & 0xff, true); + host->send_addr(host, (page_addr >> 8) & 0xff, false); + host->send_addr(host, (page_addr >> 16) & 0xff, true); } else /* paddr_8 - paddr_15 */ - send_addr(host, (page_addr >> 8) & 0xff, true); + host->send_addr(host, (page_addr >> 8) & 0xff, true); } } } -static void preset(struct mtd_info *mtd) +/* + * v2 and v3 type controllers can do 4bit or 8bit ecc depending + * on how much oob the nand chip has. For 8bit ecc we need at least + * 26 bytes of oob data per 512 byte block. + */ +static int get_eccsize(struct mtd_info *mtd) +{ + int oobbytes_per_512 = 0; + + oobbytes_per_512 = mtd->oobsize * 512 / mtd->writesize; + + if (oobbytes_per_512 < 26) + return 4; + else + return 8; +} + +static void preset_v1_v2(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; uint16_t tmp; /* enable interrupt, disable spare enable */ - tmp = readw(host->regs + NFC_CONFIG1); - tmp &= ~NFC_INT_MSK; - tmp &= ~NFC_SP_EN; + tmp = readw(NFC_V1_V2_CONFIG1); + tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK; + tmp &= ~NFC_V1_V2_CONFIG1_SP_EN; if (nand_chip->ecc.mode == NAND_ECC_HW) { - tmp |= NFC_ECC_EN; + tmp |= NFC_V1_V2_CONFIG1_ECC_EN; + } else { + tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN; + } + + if (nfc_is_v21() && mtd->writesize) { + host->eccsize = get_eccsize(mtd); + if (host->eccsize == 4) + tmp |= NFC_V2_CONFIG1_ECC_MODE_4; } else { - tmp &= ~NFC_ECC_EN; + host->eccsize = 1; } - writew(tmp, host->regs + NFC_CONFIG1); + + writew(tmp, NFC_V1_V2_CONFIG1); /* preset operation */ /* Unlock the internal RAM Buffer */ - writew(0x2, host->regs + NFC_CONFIG); + writew(0x2, NFC_V1_V2_CONFIG); /* Blocks to be unlocked */ if (nfc_is_v21()) { - writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR); - writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR); + writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR); + writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR); } else if (nfc_is_v1()) { - writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR); - writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR); + writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR); + writew(0x4000, NFC_V1_UNLOCKEND_BLKADDR); } else BUG(); /* Unlock Block Command for given address range */ - writew(0x4, host->regs + NFC_WRPROT); + writew(0x4, NFC_V1_V2_WRPROT); +} + +static void preset_v3(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct mxc_nand_host *host = chip->priv; + uint32_t config2, config3; + int i, addr_phases; + + writel(NFC_V3_CONFIG1_RBA(0), NFC_V3_CONFIG1); + writel(NFC_V3_IPC_CREQ, NFC_V3_IPC); + + /* Unlock the internal RAM Buffer */ + writel(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK, + NFC_V3_WRPROT); + + /* Blocks to be unlocked */ + for (i = 0; i < NAND_MAX_CHIPS; i++) + writel(0x0 | (0xffff << 16), + NFC_V3_WRPROT_UNLOCK_BLK_ADD0 + (i << 2)); + + writel(0, NFC_V3_IPC); + + config2 = NFC_V3_CONFIG2_ONE_CYCLE | + NFC_V3_CONFIG2_2CMD_PHASES | + NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) | + NFC_V3_CONFIG2_ST_CMD(0x70) | + NFC_V3_CONFIG2_NUM_ADDR_PHASE0; + + if (chip->ecc.mode == NAND_ECC_HW) + config2 |= NFC_V3_CONFIG2_ECC_EN; + + addr_phases = fls(chip->pagemask) >> 3; + + if (mtd->writesize == 2048) { + config2 |= NFC_V3_CONFIG2_PS_2048; + config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases); + } else if (mtd->writesize == 4096) { + config2 |= NFC_V3_CONFIG2_PS_4096; + config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases); + } else { + config2 |= NFC_V3_CONFIG2_PS_512; + config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases - 1); + } + + if (mtd->writesize) { + config2 |= NFC_V3_CONFIG2_PPB(ffs(mtd->erasesize / mtd->writesize) - 6); + host->eccsize = get_eccsize(mtd); + if (host->eccsize == 8) + config2 |= NFC_V3_CONFIG2_ECC_MODE_8; + } + + writel(config2, NFC_V3_CONFIG2); + + config3 = NFC_V3_CONFIG3_NUM_OF_DEVICES(0) | + NFC_V3_CONFIG3_NO_SDMA | + NFC_V3_CONFIG3_RBB_MODE | + NFC_V3_CONFIG3_SBB(6) | /* Reset default */ + NFC_V3_CONFIG3_ADD_OP(0); + + if (!(chip->options & NAND_BUSWIDTH_16)) + config3 |= NFC_V3_CONFIG3_FW8; + + writel(config3, NFC_V3_CONFIG3); + + writel(0, NFC_V3_DELAY_LINE); } /* Used by the upper layer to write command to NAND Flash for @@ -604,15 +853,15 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, /* Command pre-processing step */ switch (command) { case NAND_CMD_RESET: - send_cmd(host, command, false); - preset(mtd); + host->preset(mtd); + host->send_cmd(host, command, false); break; case NAND_CMD_STATUS: host->buf_start = 0; host->status_request = true; - send_cmd(host, command, true); + host->send_cmd(host, command, true); mxc_do_addr_cycle(mtd, column, page_addr); break; @@ -625,13 +874,13 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, command = NAND_CMD_READ0; /* only READ0 is valid */ - send_cmd(host, command, false); + host->send_cmd(host, command, false); mxc_do_addr_cycle(mtd, column, page_addr); if (mtd->writesize > 512) - send_cmd(host, NAND_CMD_READSTART, true); + host->send_cmd(host, NAND_CMD_READSTART, true); - send_page(mtd, NFC_OUTPUT); + host->send_page(mtd, NFC_OUTPUT); memcpy(host->data_buf, host->main_area0, mtd->writesize); copy_spare(mtd, true); @@ -644,28 +893,28 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, host->buf_start = column; - send_cmd(host, command, false); + host->send_cmd(host, command, false); mxc_do_addr_cycle(mtd, column, page_addr); break; case NAND_CMD_PAGEPROG: memcpy(host->main_area0, host->data_buf, mtd->writesize); copy_spare(mtd, false); - send_page(mtd, NFC_INPUT); - send_cmd(host, command, true); + host->send_page(mtd, NFC_INPUT); + host->send_cmd(host, command, true); mxc_do_addr_cycle(mtd, column, page_addr); break; case NAND_CMD_READID: - send_cmd(host, command, true); + host->send_cmd(host, command, true); mxc_do_addr_cycle(mtd, column, page_addr); - send_read_id(host); + host->send_read_id(host); host->buf_start = column; break; case NAND_CMD_ERASE1: case NAND_CMD_ERASE2: - send_cmd(host, command, false); + host->send_cmd(host, command, false); mxc_do_addr_cycle(mtd, column, page_addr); break; @@ -761,22 +1010,55 @@ static int __init mxcnd_probe(struct platform_device *pdev) } host->main_area0 = host->base; - host->main_area1 = host->base + 0x200; + + if (nfc_is_v1() || nfc_is_v21()) { + host->preset = preset_v1_v2; + host->send_cmd = send_cmd_v1_v2; + host->send_addr = send_addr_v1_v2; + host->send_page = send_page_v1_v2; + host->send_read_id = send_read_id_v1_v2; + host->get_dev_status = get_dev_status_v1_v2; + host->check_int = check_int_v1_v2; + } if (nfc_is_v21()) { - host->regs = host->base + 0x1000; + host->regs = host->base + 0x1e00; host->spare0 = host->base + 0x1000; host->spare_len = 64; oob_smallpage = &nandv2_hw_eccoob_smallpage; oob_largepage = &nandv2_hw_eccoob_largepage; this->ecc.bytes = 9; } else if (nfc_is_v1()) { - host->regs = host->base; + host->regs = host->base + 0xe00; host->spare0 = host->base + 0x800; host->spare_len = 16; oob_smallpage = &nandv1_hw_eccoob_smallpage; oob_largepage = &nandv1_hw_eccoob_largepage; this->ecc.bytes = 3; + host->eccsize = 1; + } else if (nfc_is_v3_2()) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + err = -ENODEV; + goto eirq; + } + host->regs_ip = ioremap(res->start, resource_size(res)); + if (!host->regs_ip) { + err = -ENOMEM; + goto eirq; + } + host->regs_axi = host->base + 0x1e00; + host->spare0 = host->base + 0x1000; + host->spare_len = 64; + host->preset = preset_v3; + host->send_cmd = send_cmd_v3; + host->send_addr = send_addr_v3; + host->send_page = send_page_v3; + host->send_read_id = send_read_id_v3; + host->check_int = check_int_v3; + host->get_dev_status = get_dev_status_v3; + oob_smallpage = &nandv2_hw_eccoob_smallpage; + oob_largepage = &nandv2_hw_eccoob_largepage; } else BUG(); @@ -786,7 +1068,10 @@ static int __init mxcnd_probe(struct platform_device *pdev) if (pdata->hw_ecc) { this->ecc.calculate = mxc_nand_calculate_ecc; this->ecc.hwctl = mxc_nand_enable_hwecc; - this->ecc.correct = mxc_nand_correct_data; + if (nfc_is_v1()) + this->ecc.correct = mxc_nand_correct_data_v1; + else + this->ecc.correct = mxc_nand_correct_data_v2_v3; this->ecc.mode = NAND_ECC_HW; } else { this->ecc.mode = NAND_ECC_SOFT; @@ -817,6 +1102,9 @@ static int __init mxcnd_probe(struct platform_device *pdev) goto escan; } + /* Call preset again, with correct writesize this time */ + host->preset(mtd); + if (mtd->writesize == 2048) this->ecc.layout = oob_largepage; @@ -848,6 +1136,8 @@ static int __init mxcnd_probe(struct platform_device *pdev) escan: free_irq(host->irq, host); eirq: + if (host->regs_ip) + iounmap(host->regs_ip); iounmap(host->base); eres: clk_put(host->clk); @@ -867,59 +1157,19 @@ static int __devexit mxcnd_remove(struct platform_device *pdev) nand_release(&host->mtd); free_irq(host->irq, host); + if (host->regs_ip) + iounmap(host->regs_ip); iounmap(host->base); kfree(host); return 0; } -#ifdef CONFIG_PM -static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct mtd_info *mtd = platform_get_drvdata(pdev); - struct nand_chip *nand_chip = mtd->priv; - struct mxc_nand_host *host = nand_chip->priv; - int ret = 0; - - DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n"); - - ret = mtd->suspend(mtd); - - /* - * nand_suspend locks the device for exclusive access, so - * the clock must already be off. - */ - BUG_ON(!ret && host->clk_act); - - return ret; -} - -static int mxcnd_resume(struct platform_device *pdev) -{ - struct mtd_info *mtd = platform_get_drvdata(pdev); - struct nand_chip *nand_chip = mtd->priv; - struct mxc_nand_host *host = nand_chip->priv; - int ret = 0; - - DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n"); - - mtd->resume(mtd); - - return ret; -} - -#else -# define mxcnd_suspend NULL -# define mxcnd_resume NULL -#endif /* CONFIG_PM */ - static struct platform_driver mxcnd_driver = { .driver = { .name = DRIVER_NAME, - }, + }, .remove = __devexit_p(mxcnd_remove), - .suspend = mxcnd_suspend, - .resume = mxcnd_resume, }; static int __init mxc_nd_init(void) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 4a7b864..16a1714 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -42,7 +42,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> -#include <linux/mtd/compatmac.h> #include <linux/interrupt.h> #include <linux/bitops.h> #include <linux/leds.h> @@ -347,7 +346,7 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) struct nand_chip *chip = mtd->priv; u16 bad; - if (chip->options & NAND_BB_LAST_PAGE) + if (chip->options & NAND_BBT_SCANLASTPAGE) ofs += mtd->erasesize - mtd->writesize; page = (int)(ofs >> chip->page_shift) & chip->pagemask; @@ -397,9 +396,9 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) { struct nand_chip *chip = mtd->priv; uint8_t buf[2] = { 0, 0 }; - int block, ret; + int block, ret, i = 0; - if (chip->options & NAND_BB_LAST_PAGE) + if (chip->options & NAND_BBT_SCANLASTPAGE) ofs += mtd->erasesize - mtd->writesize; /* Get block number */ @@ -411,17 +410,31 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) if (chip->options & NAND_USE_FLASH_BBT) ret = nand_update_bbt(mtd, ofs); else { - /* We write two bytes, so we dont have to mess with 16 bit - * access - */ nand_get_device(chip, mtd, FL_WRITING); - ofs += mtd->oobsize; - chip->ops.len = chip->ops.ooblen = 2; - chip->ops.datbuf = NULL; - chip->ops.oobbuf = buf; - chip->ops.ooboffs = chip->badblockpos & ~0x01; - ret = nand_do_write_oob(mtd, ofs, &chip->ops); + /* Write to first two pages and to byte 1 and 6 if necessary. + * If we write to more than one location, the first error + * encountered quits the procedure. We write two bytes per + * location, so we dont have to mess with 16 bit access. + */ + do { + chip->ops.len = chip->ops.ooblen = 2; + chip->ops.datbuf = NULL; + chip->ops.oobbuf = buf; + chip->ops.ooboffs = chip->badblockpos & ~0x01; + + ret = nand_do_write_oob(mtd, ofs, &chip->ops); + + if (!ret && (chip->options & NAND_BBT_SCANBYTE1AND6)) { + chip->ops.ooboffs = NAND_SMALL_BADBLOCK_POS + & ~0x01; + ret = nand_do_write_oob(mtd, ofs, &chip->ops); + } + i++; + ofs += mtd->writesize; + } while (!ret && (chip->options & NAND_BBT_SCAN2NDPAGE) && + i < 2); + nand_release_device(mtd); } if (!ret) @@ -2920,9 +2933,14 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 32 - 1; /* Set the bad block position */ - chip->badblockpos = mtd->writesize > 512 ? - NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS; - chip->badblockbits = 8; + if (!(busw & NAND_BUSWIDTH_16) && (*maf_id == NAND_MFR_STMICRO || + (*maf_id == NAND_MFR_SAMSUNG && + mtd->writesize == 512) || + *maf_id == NAND_MFR_AMD)) + chip->badblockpos = NAND_SMALL_BADBLOCK_POS; + else + chip->badblockpos = NAND_LARGE_BADBLOCK_POS; + /* Get chip options, preserve non chip based options */ chip->options &= ~NAND_CHIPOPTIONS_MSK; @@ -2941,12 +2959,32 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, /* * Bad block marker is stored in the last page of each block - * on Samsung and Hynix MLC devices + * on Samsung and Hynix MLC devices; stored in first two pages + * of each block on Micron devices with 2KiB pages and on + * SLC Samsung, Hynix, and AMD/Spansion. All others scan only + * the first page. */ if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) && (*maf_id == NAND_MFR_SAMSUNG || *maf_id == NAND_MFR_HYNIX)) - chip->options |= NAND_BB_LAST_PAGE; + chip->options |= NAND_BBT_SCANLASTPAGE; + else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) && + (*maf_id == NAND_MFR_SAMSUNG || + *maf_id == NAND_MFR_HYNIX || + *maf_id == NAND_MFR_AMD)) || + (mtd->writesize == 2048 && + *maf_id == NAND_MFR_MICRON)) + chip->options |= NAND_BBT_SCAN2NDPAGE; + + /* + * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6 + */ + if (!(busw & NAND_BUSWIDTH_16) && + *maf_id == NAND_MFR_STMICRO && + mtd->writesize == 2048) { + chip->options |= NAND_BBT_SCANBYTE1AND6; + chip->badblockpos = 0; + } /* Check for AND chips with 4 page planes */ if (chip->options & NAND_4PAGE_ARRAY) @@ -3306,6 +3344,11 @@ void nand_release(struct mtd_info *mtd) kfree(chip->bbt); if (!(chip->options & NAND_OWN_BUFFERS)) kfree(chip->buffers); + + /* Free bad block descriptor memory */ + if (chip->badblock_pattern && chip->badblock_pattern->options + & NAND_BBT_DYNAMICSTRUCT) + kfree(chip->badblock_pattern); } EXPORT_SYMBOL_GPL(nand_lock); diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index ad97c0c..5fedf4a 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -55,7 +55,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> -#include <linux/mtd/compatmac.h> #include <linux/bitops.h> #include <linux/delay.h> #include <linux/vmalloc.h> @@ -93,6 +92,28 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc return -1; } + /* Check both positions 1 and 6 for pattern? */ + if (td->options & NAND_BBT_SCANBYTE1AND6) { + if (td->options & NAND_BBT_SCANEMPTY) { + p += td->len; + end += NAND_SMALL_BADBLOCK_POS - td->offs; + /* Check region between positions 1 and 6 */ + for (i = 0; i < NAND_SMALL_BADBLOCK_POS - td->offs - td->len; + i++) { + if (*p++ != 0xff) + return -1; + } + } + else { + p += NAND_SMALL_BADBLOCK_POS - td->offs; + } + /* Compare the pattern */ + for (i = 0; i < td->len; i++) { + if (p[i] != td->pattern[i]) + return -1; + } + } + if (td->options & NAND_BBT_SCANEMPTY) { p += td->len; end += td->len; @@ -124,6 +145,13 @@ static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td) if (p[td->offs + i] != td->pattern[i]) return -1; } + /* Need to check location 1 AND 6? */ + if (td->options & NAND_BBT_SCANBYTE1AND6) { + for (i = 0; i < td->len; i++) { + if (p[NAND_SMALL_BADBLOCK_POS + i] != td->pattern[i]) + return -1; + } + } return 0; } @@ -397,12 +425,10 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, if (bd->options & NAND_BBT_SCANALLPAGES) len = 1 << (this->bbt_erase_shift - this->page_shift); - else { - if (bd->options & NAND_BBT_SCAN2NDPAGE) - len = 2; - else - len = 1; - } + else if (bd->options & NAND_BBT_SCAN2NDPAGE) + len = 2; + else + len = 1; if (!(bd->options & NAND_BBT_SCANEMPTY)) { /* We need only read few bytes from the OOB area */ @@ -432,7 +458,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, from = (loff_t)startblock << (this->bbt_erase_shift - 1); } - if (this->options & NAND_BB_LAST_PAGE) + if (this->options & NAND_BBT_SCANLASTPAGE) from += mtd->erasesize - (mtd->writesize * len); for (i = startblock; i < numblocks;) { @@ -1092,30 +1118,16 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs) * while scanning a device for factory marked good / bad blocks. */ static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; -static struct nand_bbt_descr smallpage_memorybased = { - .options = NAND_BBT_SCAN2NDPAGE, - .offs = 5, - .len = 1, - .pattern = scan_ff_pattern -}; - -static struct nand_bbt_descr largepage_memorybased = { - .options = 0, - .offs = 0, - .len = 2, - .pattern = scan_ff_pattern -}; - static struct nand_bbt_descr smallpage_flashbased = { .options = NAND_BBT_SCAN2NDPAGE, - .offs = 5, + .offs = NAND_SMALL_BADBLOCK_POS, .len = 1, .pattern = scan_ff_pattern }; static struct nand_bbt_descr largepage_flashbased = { .options = NAND_BBT_SCAN2NDPAGE, - .offs = 0, + .offs = NAND_LARGE_BADBLOCK_POS, .len = 2, .pattern = scan_ff_pattern }; @@ -1154,6 +1166,43 @@ static struct nand_bbt_descr bbt_mirror_descr = { .pattern = mirror_pattern }; +#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \ + NAND_BBT_SCANBYTE1AND6) +/** + * nand_create_default_bbt_descr - [Internal] Creates a BBT descriptor structure + * @this: NAND chip to create descriptor for + * + * This function allocates and initializes a nand_bbt_descr for BBM detection + * based on the properties of "this". The new descriptor is stored in + * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when + * passed to this function. + * + * TODO: Handle other flags, replace other static structs + * (e.g. handle NAND_BBT_FLASH for flash-based BBT, + * replace smallpage_flashbased) + * + */ +static int nand_create_default_bbt_descr(struct nand_chip *this) +{ + struct nand_bbt_descr *bd; + if (this->badblock_pattern) { + printk(KERN_WARNING "BBT descr already allocated; not replacing.\n"); + return -EINVAL; + } + bd = kzalloc(sizeof(*bd), GFP_KERNEL); + if (!bd) { + printk(KERN_ERR "nand_create_default_bbt_descr: Out of memory\n"); + return -ENOMEM; + } + bd->options = this->options & BBT_SCAN_OPTIONS; + bd->offs = this->badblockpos; + bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1; + bd->pattern = scan_ff_pattern; + bd->options |= NAND_BBT_DYNAMICSTRUCT; + this->badblock_pattern = bd; + return 0; +} + /** * nand_default_bbt - [NAND Interface] Select a default bad block table for the device * @mtd: MTD device structure @@ -1196,10 +1245,8 @@ int nand_default_bbt(struct mtd_info *mtd) } else { this->bbt_td = NULL; this->bbt_md = NULL; - if (!this->badblock_pattern) { - this->badblock_pattern = (mtd->writesize > 512) ? - &largepage_memorybased : &smallpage_memorybased; - } + if (!this->badblock_pattern) + nand_create_default_bbt_descr(this); } return nand_scan_bbt(mtd, this->badblock_pattern); } diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 89907ed9..a04b891 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -85,6 +85,7 @@ struct nand_flash_dev nand_flash_ids[] = { {"NAND 128MiB 3,3V 8-bit", 0xD1, 0, 128, 0, LP_OPTIONS}, {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16}, {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16}, + {"NAND 128MiB 1,8V 16-bit", 0xAD, 0, 128, 0, LP_OPTIONS16}, /* 2 Gigabit */ {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, LP_OPTIONS}, @@ -110,6 +111,9 @@ struct nand_flash_dev nand_flash_ids[] = { {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, LP_OPTIONS16}, {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16}, + /* 32 Gigabit */ + {"NAND 4GiB 3,3V 8-bit", 0xD7, 0, 4096, 0, LP_OPTIONS16}, + /* * Renesas AND 1 Gigabit. Those chips do not support extended id and * have a strange page/block layout ! The chosen minimum erasesize is diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 261337e..c25648b 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -553,8 +553,8 @@ static uint64_t divide(uint64_t n, uint32_t d) */ static int init_nandsim(struct mtd_info *mtd) { - struct nand_chip *chip = (struct nand_chip *)mtd->priv; - struct nandsim *ns = (struct nandsim *)(chip->priv); + struct nand_chip *chip = mtd->priv; + struct nandsim *ns = chip->priv; int i, ret = 0; uint64_t remains; uint64_t next_offset; @@ -1877,7 +1877,7 @@ static void switch_state(struct nandsim *ns) static u_char ns_nand_read_byte(struct mtd_info *mtd) { - struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv; + struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; u_char outb = 0x00; /* Sanity and correctness checks */ @@ -1950,7 +1950,7 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd) static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte) { - struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv; + struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; /* Sanity and correctness checks */ if (!ns->lines.ce) { @@ -2132,7 +2132,7 @@ static uint16_t ns_nand_read_word(struct mtd_info *mtd) static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) { - struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv; + struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; /* Check that chip is expecting data input */ if (!(ns->state & STATE_DATAIN_MASK)) { @@ -2159,7 +2159,7 @@ static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) { - struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv; + struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; /* Sanity and correctness checks */ if (!ns->lines.ce) { @@ -2352,7 +2352,7 @@ module_init(ns_init_module); */ static void __exit ns_cleanup_module(void) { - struct nandsim *ns = (struct nandsim *)(((struct nand_chip *)nsmtd->priv)->priv); + struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv; int i; free_nandsim(ns); /* Free nandsim private resources */ diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index 8d46731..90e143e 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -91,7 +91,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) } /* Scan to find existance of the device */ - if (nand_scan(&data->mtd, 1)) { + if (nand_scan(&data->mtd, pdata->chip.nr_chips)) { err = -ENXIO; goto out; } diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index bcfc851..5169ca6 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -64,8 +64,8 @@ static inline void r852_write_reg_dword(struct r852_device *dev, /* returns pointer to our private structure */ static inline struct r852_device *r852_get_dev(struct mtd_info *mtd) { - struct nand_chip *chip = (struct nand_chip *)mtd->priv; - return (struct r852_device *)chip->priv; + struct nand_chip *chip = mtd->priv; + return chip->priv; } @@ -380,7 +380,7 @@ void r852_cmdctl(struct mtd_info *mtd, int dat, unsigned int ctrl) */ int r852_wait(struct mtd_info *mtd, struct nand_chip *chip) { - struct r852_device *dev = (struct r852_device *)chip->priv; + struct r852_device *dev = chip->priv; unsigned long timeout; int status; diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c index a033c4c..67440b5 100644 --- a/drivers/mtd/nand/rtc_from4.c +++ b/drivers/mtd/nand/rtc_from4.c @@ -24,7 +24,6 @@ #include <linux/rslib.h> #include <linux/bitrev.h> #include <linux/module.h> -#include <linux/mtd/compatmac.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 239aadf..33d832d 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -727,15 +727,12 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, if (set == NULL) return add_mtd_device(&mtd->mtd); - if (set->nr_partitions == 0) { - mtd->mtd.name = set->name; - nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, - &part_info, 0); - } else { - if (set->nr_partitions > 0 && set->partitions != NULL) { - nr_part = set->nr_partitions; - part_info = set->partitions; - } + mtd->mtd.name = set->name; + nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, &part_info, 0); + + if (nr_part <= 0 && set->nr_partitions > 0) { + nr_part = set->nr_partitions; + part_info = set->partitions; } if (nr_part > 0 && part_info) diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c index ac80fb362..4a8f367 100644 --- a/drivers/mtd/nand/sm_common.c +++ b/drivers/mtd/nand/sm_common.c @@ -109,7 +109,7 @@ static struct nand_flash_dev nand_xd_flash_ids[] = { int sm_register_device(struct mtd_info *mtd, int smartmedia) { - struct nand_chip *chip = (struct nand_chip *)mtd->priv; + struct nand_chip *chip = mtd->priv; int ret; chip->options |= NAND_SKIP_BBTSCAN; diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index a4578bf..b155666 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -1,11 +1,22 @@ -/* Linux driver for NAND Flash Translation Layer */ -/* (c) 1999 Machine Vision Holdings, Inc. */ -/* Author: David Woodhouse <dwmw2@infradead.org> */ - /* - The contents of this file are distributed under the GNU General - Public License version 2. The author places no additional - restrictions of any kind on it. + * Linux driver for NAND Flash Translation Layer + * + * Copyright © 1999 Machine Vision Holdings, Inc. + * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #define PRERELEASE diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c index 8b22b18..e3cd1ff 100644 --- a/drivers/mtd/nftlmount.c +++ b/drivers/mtd/nftlmount.c @@ -2,7 +2,8 @@ * NFTL mount code with extensive checks * * Author: Fabrice Bellard (fabrice.bellard@netgem.com) - * Copyright (C) 2000 Netgem S.A. + * Copyright © 2000 Netgem S.A. + * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index 4f0d635..8bf7dc6 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -1,11 +1,11 @@ /* * Flash partitions described by the OF (or flattened) device tree * - * Copyright (C) 2006 MontaVista Software Inc. + * Copyright © 2006 MontaVista Software Inc. * Author: Vitaly Wool <vwool@ru.mvista.com> * * Revised to handle newer style flash binding by: - * Copyright (C) 2007 David Gibson, IBM Corporation. + * Copyright © 2007 David Gibson, IBM Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig index 9a49d68..3f32289 100644 --- a/drivers/mtd/onenand/Kconfig +++ b/drivers/mtd/onenand/Kconfig @@ -25,14 +25,14 @@ config MTD_ONENAND_GENERIC config MTD_ONENAND_OMAP2 tristate "OneNAND on OMAP2/OMAP3 support" - depends on MTD_ONENAND && (ARCH_OMAP2 || ARCH_OMAP3) + depends on ARCH_OMAP2 || ARCH_OMAP3 help Support for a OneNAND flash device connected to an OMAP2/OMAP3 CPU via the GPMC memory controller. config MTD_ONENAND_SAMSUNG tristate "OneNAND on Samsung SOC controller support" - depends on MTD_ONENAND && (ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210) + depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 help Support for a OneNAND flash device connected to an Samsung SOC S3C64XX/S5PC1XX controller. diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 26caf25..a2bb520 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -377,8 +377,11 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le default: block = onenand_block(this, addr); - page = (int) (addr - onenand_addr(this, block)) >> this->page_shift; - + if (FLEXONENAND(this)) + page = (int) (addr - onenand_addr(this, block))>>\ + this->page_shift; + else + page = (int) (addr >> this->page_shift); if (ONENAND_IS_2PLANE(this)) { /* Make the even block number */ block &= ~1; @@ -3730,17 +3733,16 @@ out: } /** - * onenand_probe - [OneNAND Interface] Probe the OneNAND device + * onenand_chip_probe - [OneNAND Interface] The generic chip probe * @param mtd MTD device structure * * OneNAND detection method: * Compare the values from command with ones from register */ -static int onenand_probe(struct mtd_info *mtd) +static int onenand_chip_probe(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; - int bram_maf_id, bram_dev_id, maf_id, dev_id, ver_id; - int density; + int bram_maf_id, bram_dev_id, maf_id, dev_id; int syscfg; /* Save system configuration 1 */ @@ -3763,12 +3765,6 @@ static int onenand_probe(struct mtd_info *mtd) /* Restore system configuration 1 */ this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1); - /* Workaround */ - if (syscfg & ONENAND_SYS_CFG1_SYNC_WRITE) { - bram_maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); - bram_dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); - } - /* Check manufacturer ID */ if (onenand_check_maf(bram_maf_id)) return -ENXIO; @@ -3776,13 +3772,35 @@ static int onenand_probe(struct mtd_info *mtd) /* Read manufacturer and device IDs from Register */ maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); - ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID); - this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY); /* Check OneNAND device */ if (maf_id != bram_maf_id || dev_id != bram_dev_id) return -ENXIO; + return 0; +} + +/** + * onenand_probe - [OneNAND Interface] Probe the OneNAND device + * @param mtd MTD device structure + */ +static int onenand_probe(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + int maf_id, dev_id, ver_id; + int density; + int ret; + + ret = this->chip_probe(mtd); + if (ret) + return ret; + + /* Read manufacturer and device IDs from Register */ + maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); + dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); + ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID); + this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY); + /* Flash device information */ onenand_print_device_info(dev_id, ver_id); this->device_id = dev_id; @@ -3909,6 +3927,9 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) if (!this->unlock_all) this->unlock_all = onenand_unlock_all; + if (!this->chip_probe) + this->chip_probe = onenand_chip_probe; + if (!this->read_bufferram) this->read_bufferram = onenand_read_bufferram; if (!this->write_bufferram) diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c index a91fcac..01ab5b3 100644 --- a/drivers/mtd/onenand/onenand_bbt.c +++ b/drivers/mtd/onenand/onenand_bbt.c @@ -15,7 +15,6 @@ #include <linux/slab.h> #include <linux/mtd/mtd.h> #include <linux/mtd/onenand.h> -#include <linux/mtd/compatmac.h> /** * check_short_pattern - [GENERIC] check if a pattern is in the buffer diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index 2750317..cb443af 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -630,6 +630,12 @@ normal: return 0; } +static int s5pc110_chip_probe(struct mtd_info *mtd) +{ + /* Now just return 0 */ + return 0; +} + static int s3c_onenand_bbt_wait(struct mtd_info *mtd, int state) { unsigned int flags = INT_ACT | LOAD_CMP; @@ -757,6 +763,7 @@ static void s3c_onenand_setup(struct mtd_info *mtd) /* Use generic onenand functions */ onenand->cmd_map = s5pc1xx_cmd_map; this->read_bufferram = s5pc110_read_bufferram; + this->chip_probe = s5pc110_chip_probe; return; } else { BUG(); @@ -781,7 +788,6 @@ static int s3c_onenand_probe(struct platform_device *pdev) struct mtd_info *mtd; struct resource *r; int size, err; - unsigned long onenand_ctrl_cfg = 0; pdata = pdev->dev.platform_data; /* No need to check pdata. the platform data is optional */ @@ -900,14 +906,6 @@ static int s3c_onenand_probe(struct platform_device *pdev) } onenand->phys_base = onenand->base_res->start; - - onenand_ctrl_cfg = readl(onenand->dma_addr + 0x100); - if ((onenand_ctrl_cfg & ONENAND_SYS_CFG1_SYNC_WRITE) && - onenand->dma_addr) - writel(onenand_ctrl_cfg & ~ONENAND_SYS_CFG1_SYNC_WRITE, - onenand->dma_addr + 0x100); - else - onenand_ctrl_cfg = 0; } if (onenand_scan(mtd, 1)) { @@ -915,10 +913,7 @@ static int s3c_onenand_probe(struct platform_device *pdev) goto scan_failed; } - if (onenand->type == TYPE_S5PC110) { - if (onenand_ctrl_cfg && onenand->dma_addr) - writel(onenand_ctrl_cfg, onenand->dma_addr + 0x100); - } else { + if (onenand->type != TYPE_S5PC110) { /* S3C doesn't handle subpage write */ mtd->subpage_sft = 0; this->subpagesize = mtd->writesize; diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c index 2d600a1..7a87d07 100644 --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c @@ -1,6 +1,24 @@ /* * Parse RedBoot-style Flash Image System (FIS) tables and * produce a Linux partition array to match. + * + * Copyright © 2001 Red Hat UK Limited + * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * */ #include <linux/kernel.h> diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c index 63b83c0..cc4d180 100644 --- a/drivers/mtd/rfd_ftl.c +++ b/drivers/mtd/rfd_ftl.c @@ -1,7 +1,7 @@ /* * rfd_ftl.c -- resident flash disk (flash translation layer) * - * Copyright (C) 2005 Sean Young <sean@mess.org> + * Copyright © 2005 Sean Young <sean@mess.org> * * This type of flash translation layer (FTL) is used by the Embedded BIOS * by General Software. It is known as the Resident Flash Disk (RFD), see: diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c index 81c4ecd..5cd1897 100644 --- a/drivers/mtd/ssfdc.c +++ b/drivers/mtd/ssfdc.c @@ -1,6 +1,6 @@ /* * Linux driver for SSFDC Flash Translation Layer (Read only) - * (c) 2005 Eptar srl + * © 2005 Eptar srl * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com> * * Based on NTFL and MTDBLOCK_RO drivers diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c index 6bc1b82..00b937e 100644 --- a/drivers/mtd/tests/mtd_pagetest.c +++ b/drivers/mtd/tests/mtd_pagetest.c @@ -310,7 +310,7 @@ static int crosstest(void) static int erasecrosstest(void) { size_t read = 0, written = 0; - int err = 0, i, ebnum, ok = 1, ebnum2; + int err = 0, i, ebnum, ebnum2; loff_t addr0; char *readbuf = twopages; @@ -357,8 +357,7 @@ static int erasecrosstest(void) if (memcmp(writebuf, readbuf, pgsize)) { printk(PRINT_PREF "verify failed!\n"); errcnt += 1; - ok = 0; - return err; + return -1; } printk(PRINT_PREF "erasing block %d\n", ebnum); @@ -396,10 +395,10 @@ static int erasecrosstest(void) if (memcmp(writebuf, readbuf, pgsize)) { printk(PRINT_PREF "verify failed!\n"); errcnt += 1; - ok = 0; + return -1; } - if (ok && !err) + if (!err) printk(PRINT_PREF "erasecrosstest ok\n"); return err; } diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 066fd5b..ad19585 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -3198,17 +3198,17 @@ static int __devinit init_one(struct pci_dev *pdev, } } - err = pci_request_regions(pdev, DRV_NAME); + err = pci_enable_device(pdev); if (err) { - /* Just info, some other driver may have claimed the device. */ - dev_info(&pdev->dev, "cannot obtain PCI resources\n"); - return err; + dev_err(&pdev->dev, "cannot enable PCI device\n"); + goto out; } - err = pci_enable_device(pdev); + err = pci_request_regions(pdev, DRV_NAME); if (err) { - dev_err(&pdev->dev, "cannot enable PCI device\n"); - goto out_release_regions; + /* Just info, some other driver may have claimed the device. */ + dev_info(&pdev->dev, "cannot obtain PCI resources\n"); + goto out_disable_device; } if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { @@ -3217,11 +3217,11 @@ static int __devinit init_one(struct pci_dev *pdev, if (err) { dev_err(&pdev->dev, "unable to obtain 64-bit DMA for " "coherent allocations\n"); - goto out_disable_device; + goto out_release_regions; } } else if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) { dev_err(&pdev->dev, "no usable DMA configuration\n"); - goto out_disable_device; + goto out_release_regions; } pci_set_master(pdev); @@ -3234,7 +3234,7 @@ static int __devinit init_one(struct pci_dev *pdev, adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); if (!adapter) { err = -ENOMEM; - goto out_disable_device; + goto out_release_regions; } adapter->nofail_skb = @@ -3370,11 +3370,12 @@ out_free_dev: out_free_adapter: kfree(adapter); -out_disable_device: - pci_disable_device(pdev); out_release_regions: pci_release_regions(pdev); +out_disable_device: + pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); +out: return err; } diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c index a165632..7b6d07f 100644 --- a/drivers/net/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/cxgb4vf/cxgb4vf_main.c @@ -2462,23 +2462,24 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev, version_printed = 1; } + /* - * Reserve PCI resources for the device. If we can't get them some - * other driver may have already claimed the device ... + * Initialize generic PCI device state. */ - err = pci_request_regions(pdev, KBUILD_MODNAME); + err = pci_enable_device(pdev); if (err) { - dev_err(&pdev->dev, "cannot obtain PCI resources\n"); + dev_err(&pdev->dev, "cannot enable PCI device\n"); return err; } /* - * Initialize generic PCI device state. + * Reserve PCI resources for the device. If we can't get them some + * other driver may have already claimed the device ... */ - err = pci_enable_device(pdev); + err = pci_request_regions(pdev, KBUILD_MODNAME); if (err) { - dev_err(&pdev->dev, "cannot enable PCI device\n"); - goto err_release_regions; + dev_err(&pdev->dev, "cannot obtain PCI resources\n"); + goto err_disable_device; } /* @@ -2491,14 +2492,14 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev, if (err) { dev_err(&pdev->dev, "unable to obtain 64-bit DMA for" " coherent allocations\n"); - goto err_disable_device; + goto err_release_regions; } pci_using_dac = 1; } else { err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (err != 0) { dev_err(&pdev->dev, "no usable DMA configuration\n"); - goto err_disable_device; + goto err_release_regions; } pci_using_dac = 0; } @@ -2514,7 +2515,7 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev, adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); if (!adapter) { err = -ENOMEM; - goto err_disable_device; + goto err_release_regions; } pci_set_drvdata(pdev, adapter); adapter->pdev = pdev; @@ -2750,13 +2751,13 @@ err_free_adapter: kfree(adapter); pci_set_drvdata(pdev, NULL); -err_disable_device: - pci_disable_device(pdev); - pci_clear_master(pdev); - err_release_regions: pci_release_regions(pdev); pci_set_drvdata(pdev, NULL); + pci_clear_master(pdev); + +err_disable_device: + pci_disable_device(pdev); err_out: return err; diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index d0824e3..7fbd052 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2944,8 +2944,8 @@ static int __devexit davinci_emac_remove(struct platform_device *pdev) release_mem_region(res->start, res->end - res->start + 1); unregister_netdev(ndev); - free_netdev(ndev); iounmap(priv->remap_addr); + free_netdev(ndev); clk_disable(emac_clk); clk_put(emac_clk); diff --git a/drivers/net/e100.c b/drivers/net/e100.c index b194bad..8e2eab4 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1779,6 +1779,7 @@ static int e100_tx_clean(struct nic *nic) for (cb = nic->cb_to_clean; cb->status & cpu_to_le16(cb_complete); cb = nic->cb_to_clean = cb->next) { + rmb(); /* read skb after status */ netif_printk(nic, tx_done, KERN_DEBUG, nic->netdev, "cb[%d]->status = 0x%04X\n", (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)), @@ -1927,6 +1928,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, netif_printk(nic, rx_status, KERN_DEBUG, nic->netdev, "status=0x%04X\n", rfd_status); + rmb(); /* read size after status bit */ /* If data isn't ready, nothing to indicate */ if (unlikely(!(rfd_status & cb_complete))) { diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 02833af..5cc39ed 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3454,6 +3454,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { bool cleaned = false; + rmb(); /* read buffer_info after eop_desc */ for ( ; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; @@ -3643,6 +3644,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, if (*work_done >= work_to_do) break; (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ status = rx_desc->status; skb = buffer_info->skb; @@ -3849,6 +3851,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, if (*work_done >= work_to_do) break; (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ status = rx_desc->status; skb = buffer_info->skb; diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 521c6ee1..2b8ef44 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -781,6 +781,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, if (*work_done >= work_to_do) break; (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ status = rx_desc->status; skb = buffer_info->skb; @@ -991,6 +992,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { bool cleaned = false; + rmb(); /* read buffer_info after eop_desc */ for (; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; @@ -1087,6 +1089,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, break; (*work_done)++; skb = buffer_info->skb; + rmb(); /* read descriptor and rx_buffer_info after status DD */ /* in the packet split case this is header only */ prefetch(skb->data - NET_IP_ALIGN); @@ -1286,6 +1289,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, if (*work_done >= work_to_do) break; (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ status = rx_desc->status; skb = buffer_info->skb; diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c index 77a7f87..9aab853 100644 --- a/drivers/net/enic/enic_main.c +++ b/drivers/net/enic/enic_main.c @@ -1087,10 +1087,7 @@ static int enic_set_port_profile(struct enic *enic, u8 *mac) { struct vic_provinfo *vp; u8 oui[3] = VIC_PROVINFO_CISCO_OUI; - u8 *uuid; char uuid_str[38]; - static char *uuid_fmt = "%02X%02X%02X%02X-%02X%02X-%02X%02X-" - "%02X%02X-%02X%02X%02X%02X%0X%02X"; int err; err = enic_vnic_dev_deinit(enic); @@ -1121,24 +1118,14 @@ static int enic_set_port_profile(struct enic *enic, u8 *mac) ETH_ALEN, mac); if (enic->pp.set & ENIC_SET_INSTANCE) { - uuid = enic->pp.instance_uuid; - sprintf(uuid_str, uuid_fmt, - uuid[0], uuid[1], uuid[2], uuid[3], - uuid[4], uuid[5], uuid[6], uuid[7], - uuid[8], uuid[9], uuid[10], uuid[11], - uuid[12], uuid[13], uuid[14], uuid[15]); + sprintf(uuid_str, "%pUB", enic->pp.instance_uuid); vic_provinfo_add_tlv(vp, VIC_LINUX_PROV_TLV_CLIENT_UUID_STR, sizeof(uuid_str), uuid_str); } if (enic->pp.set & ENIC_SET_HOST) { - uuid = enic->pp.host_uuid; - sprintf(uuid_str, uuid_fmt, - uuid[0], uuid[1], uuid[2], uuid[3], - uuid[4], uuid[5], uuid[6], uuid[7], - uuid[8], uuid[9], uuid[10], uuid[11], - uuid[12], uuid[13], uuid[14], uuid[15]); + sprintf(uuid_str, "%pUB", enic->pp.host_uuid); vic_provinfo_add_tlv(vp, VIC_LINUX_PROV_TLV_HOST_UUID_STR, sizeof(uuid_str), uuid_str); diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index df5dcd2..9b4e589 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -5353,6 +5353,7 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { + rmb(); /* read buffer_info after eop_desc status */ for (cleaned = false; !cleaned; count++) { tx_desc = E1000_TX_DESC_ADV(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; @@ -5558,6 +5559,7 @@ static bool igb_clean_rx_irq_adv(struct igb_q_vector *q_vector, if (*work_done >= budget) break; (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ skb = buffer_info->skb; prefetch(skb->data - NET_IP_ALIGN); diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index ec808fa..c539f7c 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -248,6 +248,7 @@ static bool igbvf_clean_rx_irq(struct igbvf_adapter *adapter, if (*work_done >= work_to_do) break; (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ buffer_info = &rx_ring->buffer_info[i]; @@ -780,6 +781,7 @@ static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring) while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { + rmb(); /* read buffer_info after eop_desc status */ for (cleaned = false; !cleaned; count++) { tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index c6b75c8..45fc89b 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1816,6 +1816,7 @@ ixgb_clean_tx_irq(struct ixgb_adapter *adapter) while (eop_desc->status & IXGB_TX_DESC_STATUS_DD) { + rmb(); /* read buffer_info after eop_desc */ for (cleaned = false; !cleaned; ) { tx_desc = IXGB_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; @@ -1976,6 +1977,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter, int *work_done, int work_to_do) break; (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ status = rx_desc->status; skb = buffer_info->skb; buffer_info->skb = NULL; diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 7d6a415..e32af43 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -748,6 +748,7 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) && (count < tx_ring->work_limit)) { bool cleaned = false; + rmb(); /* read buffer_info after eop_desc */ for ( ; !cleaned; count++) { struct sk_buff *skb; tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i); @@ -6155,9 +6156,11 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb) txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1); txq += adapter->ring_feature[RING_F_FCOE].mask; return txq; +#ifdef CONFIG_IXGBE_DCB } else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { txq = adapter->fcoe.up; return txq; +#endif } } #endif @@ -6216,10 +6219,14 @@ static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb, if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED && (skb->protocol == htons(ETH_P_FCOE) || skb->protocol == htons(ETH_P_FIP))) { - tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK - << IXGBE_TX_FLAGS_VLAN_SHIFT); - tx_flags |= ((adapter->fcoe.up << 13) - << IXGBE_TX_FLAGS_VLAN_SHIFT); +#ifdef CONFIG_IXGBE_DCB + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK + << IXGBE_TX_FLAGS_VLAN_SHIFT); + tx_flags |= ((adapter->fcoe.up << 13) + << IXGBE_TX_FLAGS_VLAN_SHIFT); + } +#endif /* flag for FCoE offloads */ if (skb->protocol == htons(ETH_P_FCOE)) tx_flags |= IXGBE_TX_FLAGS_FCOE; diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c index 3e291cc..918c003 100644 --- a/drivers/net/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ixgbevf/ixgbevf_main.c @@ -231,6 +231,7 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_adapter *adapter, while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) && (count < tx_ring->work_limit)) { bool cleaned = false; + rmb(); /* read buffer_info after eop_desc */ for ( ; !cleaned; count++) { struct sk_buff *skb; tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i); @@ -518,6 +519,7 @@ static bool ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector, break; (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { hdr_info = le16_to_cpu(ixgbevf_get_hdr_info(rx_desc)); len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >> diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 6ce6ce1..fd86e18 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -2001,27 +2001,26 @@ static void netxen_tx_timeout_task(struct work_struct *work) if (++adapter->tx_timeo_cnt >= NX_MAX_TX_TIMEOUTS) goto request_reset; + rtnl_lock(); if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) { /* try to scrub interrupt */ netxen_napi_disable(adapter); - adapter->netdev->trans_start = jiffies; - netxen_napi_enable(adapter); netif_wake_queue(adapter->netdev); clear_bit(__NX_RESETTING, &adapter->state); - return; } else { clear_bit(__NX_RESETTING, &adapter->state); - if (!netxen_nic_reset_context(adapter)) { - adapter->netdev->trans_start = jiffies; - return; + if (netxen_nic_reset_context(adapter)) { + rtnl_unlock(); + goto request_reset; } - - /* context reset failed, fall through for fw reset */ } + adapter->netdev->trans_start = jiffies; + rtnl_unlock(); + return; request_reset: adapter->need_fw_reset = 1; diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index 6c2e8fa..af50a53 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -108,9 +108,9 @@ static void ppp_async_process(unsigned long arg); static void async_lcp_peek(struct asyncppp *ap, unsigned char *data, int len, int inbound); -static struct ppp_channel_ops async_ops = { - ppp_async_send, - ppp_async_ioctl +static const struct ppp_channel_ops async_ops = { + .start_xmit = ppp_async_send, + .ioctl = ppp_async_ioctl, }; /* diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c index 52938da..4c95ec3 100644 --- a/drivers/net/ppp_synctty.c +++ b/drivers/net/ppp_synctty.c @@ -97,9 +97,9 @@ static void ppp_sync_flush_output(struct syncppp *ap); static void ppp_sync_input(struct syncppp *ap, const unsigned char *buf, char *flags, int count); -static struct ppp_channel_ops sync_ops = { - ppp_sync_send, - ppp_sync_ioctl +static const struct ppp_channel_ops sync_ops = { + .start_xmit = ppp_sync_send, + .ioctl = ppp_sync_ioctl, }; /* diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 344ef33..c07de35 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -92,7 +92,7 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb); static const struct proto_ops pppoe_ops; -static struct ppp_channel_ops pppoe_chan_ops; +static const struct ppp_channel_ops pppoe_chan_ops; /* per-net private data for this module */ static int pppoe_net_id __read_mostly; @@ -963,7 +963,7 @@ static int pppoe_xmit(struct ppp_channel *chan, struct sk_buff *skb) return __pppoe_xmit(sk, skb); } -static struct ppp_channel_ops pppoe_chan_ops = { +static const struct ppp_channel_ops pppoe_chan_ops = { .start_xmit = pppoe_xmit, }; diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 3b03794..7f62e2d 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1457,7 +1457,6 @@ int usbnet_resume (struct usb_interface *intf) spin_lock_irq(&dev->txq.lock); while ((res = usb_get_from_anchor(&dev->deferred))) { - printk(KERN_INFO"%s has delayed data\n", __func__); skb = (struct sk_buff *)res->context; retval = usb_submit_urb(res, GFP_ATOMIC); if (retval < 0) { diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 42dffd3..fd69095 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2763,12 +2763,12 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi vptr->dev = dev; - dev->irq = pdev->irq; - ret = pci_enable_device(pdev); if (ret < 0) goto err_free_dev; + dev->irq = pdev->irq; + ret = velocity_get_pci_info(vptr, pdev); if (ret < 0) { /* error message already printed */ diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index bb6b67f..4598e9d 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -705,6 +705,19 @@ static int virtnet_close(struct net_device *dev) return 0; } +static void virtnet_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *drvinfo) +{ + struct virtnet_info *vi = netdev_priv(dev); + struct virtio_device *vdev = vi->vdev; + + strncpy(drvinfo->driver, KBUILD_MODNAME, ARRAY_SIZE(drvinfo->driver)); + strncpy(drvinfo->version, "N/A", ARRAY_SIZE(drvinfo->version)); + strncpy(drvinfo->fw_version, "N/A", ARRAY_SIZE(drvinfo->fw_version)); + strncpy(drvinfo->bus_info, dev_name(&vdev->dev), + ARRAY_SIZE(drvinfo->bus_info)); +} + static int virtnet_set_tx_csum(struct net_device *dev, u32 data) { struct virtnet_info *vi = netdev_priv(dev); @@ -817,6 +830,7 @@ static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) } static const struct ethtool_ops virtnet_ethtool_ops = { + .get_drvinfo = virtnet_get_drvinfo, .set_tx_csum = virtnet_set_tx_csum, .set_sg = ethtool_op_set_sg, .set_tso = ethtool_op_set_tso, diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c index dabafb8..fe7418a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c @@ -63,6 +63,7 @@ static bool ar9002_hw_per_calibration(struct ath_hw *ah, u8 rxchainmask, struct ath9k_cal_list *currCal) { + struct ath9k_hw_cal_data *caldata = ah->caldata; bool iscaldone = false; if (currCal->calState == CAL_RUNNING) { @@ -81,14 +82,14 @@ static bool ar9002_hw_per_calibration(struct ath_hw *ah, } currCal->calData->calPostProc(ah, numChains); - ichan->CalValid |= currCal->calData->calType; + caldata->CalValid |= currCal->calData->calType; currCal->calState = CAL_DONE; iscaldone = true; } else { ar9002_hw_setup_calibration(ah, currCal); } } - } else if (!(ichan->CalValid & currCal->calData->calType)) { + } else if (!(caldata->CalValid & currCal->calData->calType)) { ath9k_hw_reset_calibration(ah, currCal); } @@ -686,8 +687,13 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah, { bool iscaldone = true; struct ath9k_cal_list *currCal = ah->cal_list_curr; + bool nfcal, nfcal_pending = false; - if (currCal && + nfcal = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF); + if (ah->caldata) + nfcal_pending = ah->caldata->nfcal_pending; + + if (currCal && !nfcal && (currCal->calState == CAL_RUNNING || currCal->calState == CAL_WAITING)) { iscaldone = ar9002_hw_per_calibration(ah, chan, @@ -703,7 +709,7 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah, } /* Do NF cal only at longer intervals */ - if (longcal) { + if (longcal || nfcal_pending) { /* Do periodic PAOffset Cal */ ar9002_hw_pa_cal(ah, false); ar9002_hw_olc_temp_compensation(ah); @@ -712,16 +718,18 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah, * Get the value from the previous NF cal and update * history buffer. */ - ath9k_hw_getnf(ah, chan); - - /* - * Load the NF from history buffer of the current channel. - * NF is slow time-variant, so it is OK to use a historical - * value. - */ - ath9k_hw_loadnf(ah, ah->curchan); + if (ath9k_hw_getnf(ah, chan)) { + /* + * Load the NF from history buffer of the current + * channel. + * NF is slow time-variant, so it is OK to use a + * historical value. + */ + ath9k_hw_loadnf(ah, ah->curchan); + } - ath9k_hw_start_nfcal(ah); + if (longcal) + ath9k_hw_start_nfcal(ah, false); } return iscaldone; @@ -869,8 +877,10 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan) ar9002_hw_pa_cal(ah, true); /* Do NF Calibration after DC offset and other calibrations */ - REG_WRITE(ah, AR_PHY_AGC_CONTROL, - REG_READ(ah, AR_PHY_AGC_CONTROL) | AR_PHY_AGC_CONTROL_NF); + ath9k_hw_start_nfcal(ah, true); + + if (ah->caldata) + ah->caldata->nfcal_pending = true; ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL; @@ -901,7 +911,8 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan) ath9k_hw_reset_calibration(ah, ah->cal_list_curr); } - chan->CalValid = 0; + if (ah->caldata) + ah->caldata->CalValid = 0; return true; } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 5a06503..4674ea8 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -68,6 +68,7 @@ static bool ar9003_hw_per_calibration(struct ath_hw *ah, u8 rxchainmask, struct ath9k_cal_list *currCal) { + struct ath9k_hw_cal_data *caldata = ah->caldata; /* Cal is assumed not done until explicitly set below */ bool iscaldone = false; @@ -95,7 +96,7 @@ static bool ar9003_hw_per_calibration(struct ath_hw *ah, currCal->calData->calPostProc(ah, numChains); /* Calibration has finished. */ - ichan->CalValid |= currCal->calData->calType; + caldata->CalValid |= currCal->calData->calType; currCal->calState = CAL_DONE; iscaldone = true; } else { @@ -106,7 +107,7 @@ static bool ar9003_hw_per_calibration(struct ath_hw *ah, ar9003_hw_setup_calibration(ah, currCal); } } - } else if (!(ichan->CalValid & currCal->calData->calType)) { + } else if (!(caldata->CalValid & currCal->calData->calType)) { /* If current cal is marked invalid in channel, kick it off */ ath9k_hw_reset_calibration(ah, currCal); } @@ -149,6 +150,12 @@ static bool ar9003_hw_calibrate(struct ath_hw *ah, /* Do NF cal only at longer intervals */ if (longcal) { /* + * Get the value from the previous NF cal and update + * history buffer. + */ + ath9k_hw_getnf(ah, chan); + + /* * Load the NF from history buffer of the current channel. * NF is slow time-variant, so it is OK to use a historical * value. @@ -156,7 +163,7 @@ static bool ar9003_hw_calibrate(struct ath_hw *ah, ath9k_hw_loadnf(ah, ah->curchan); /* start NF calibration, without updating BB NF register */ - ath9k_hw_start_nfcal(ah); + ath9k_hw_start_nfcal(ah, false); } return iscaldone; @@ -762,6 +769,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, /* Revert chainmasks to their original values before NF cal */ ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask); + ath9k_hw_start_nfcal(ah, true); + /* Initialize list pointers */ ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL; @@ -785,7 +794,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, if (ah->cal_list_curr) ath9k_hw_reset_calibration(ah, ah->cal_list_curr); - chan->CalValid = 0; + if (ah->caldata) + ah->caldata->CalValid = 0; return true; } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index ace8d26..b883b17 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -41,6 +41,20 @@ #define LE16(x) __constant_cpu_to_le16(x) #define LE32(x) __constant_cpu_to_le32(x) +/* Local defines to distinguish between extension and control CTL's */ +#define EXT_ADDITIVE (0x8000) +#define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE) +#define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE) +#define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE) +#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */ +#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 9 /* 10*log10(3)*2 */ +#define PWRINCR_3_TO_1_CHAIN 9 /* 10*log(3)*2 */ +#define PWRINCR_3_TO_2_CHAIN 3 /* floor(10*log(3/2)*2) */ +#define PWRINCR_2_TO_1_CHAIN 6 /* 10*log(2)*2 */ + +#define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */ +#define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */ + static const struct ar9300_eeprom ar9300_default = { .eepromVersion = 2, .templateVersion = 2, @@ -609,6 +623,14 @@ static const struct ar9300_eeprom ar9300_default = { } }; +static u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz) +{ + if (fbin == AR9300_BCHAN_UNUSED) + return fbin; + + return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin)); +} + static int ath9k_hw_ar9300_check_eeprom(struct ath_hw *ah) { return 0; @@ -1417,9 +1439,9 @@ static int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray) #undef POW_SM } -static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq) +static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq, + u8 *targetPowerValT2) { - u8 targetPowerValT2[ar9300RateSize]; /* XXX: hard code for now, need to get from eeprom struct */ u8 ht40PowerIncForPdadc = 0; bool is2GHz = false; @@ -1553,9 +1575,6 @@ static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq) "TPC[%02d] 0x%08x\n", i, targetPowerValT2[i]); i++; } - - /* Write target power array to registers */ - ar9003_hw_tx_power_regwrite(ah, targetPowerValT2); } static int ar9003_hw_cal_pier_get(struct ath_hw *ah, @@ -1799,14 +1818,369 @@ static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency) return 0; } +static u16 ar9003_hw_get_direct_edge_power(struct ar9300_eeprom *eep, + int idx, + int edge, + bool is2GHz) +{ + struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G; + struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G; + + if (is2GHz) + return ctl_2g[idx].ctlEdges[edge].tPower; + else + return ctl_5g[idx].ctlEdges[edge].tPower; +} + +static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep, + int idx, + unsigned int edge, + u16 freq, + bool is2GHz) +{ + struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G; + struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G; + + u8 *ctl_freqbin = is2GHz ? + &eep->ctl_freqbin_2G[idx][0] : + &eep->ctl_freqbin_5G[idx][0]; + + if (is2GHz) { + if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq && + ctl_2g[idx].ctlEdges[edge - 1].flag) + return ctl_2g[idx].ctlEdges[edge - 1].tPower; + } else { + if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq && + ctl_5g[idx].ctlEdges[edge - 1].flag) + return ctl_5g[idx].ctlEdges[edge - 1].tPower; + } + + return AR9300_MAX_RATE_POWER; +} + +/* + * Find the maximum conformance test limit for the given channel and CTL info + */ +static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep, + u16 freq, int idx, bool is2GHz) +{ + u16 twiceMaxEdgePower = AR9300_MAX_RATE_POWER; + u8 *ctl_freqbin = is2GHz ? + &eep->ctl_freqbin_2G[idx][0] : + &eep->ctl_freqbin_5G[idx][0]; + u16 num_edges = is2GHz ? + AR9300_NUM_BAND_EDGES_2G : AR9300_NUM_BAND_EDGES_5G; + unsigned int edge; + + /* Get the edge power */ + for (edge = 0; + (edge < num_edges) && (ctl_freqbin[edge] != AR9300_BCHAN_UNUSED); + edge++) { + /* + * If there's an exact channel match or an inband flag set + * on the lower channel use the given rdEdgePower + */ + if (freq == ath9k_hw_fbin2freq(ctl_freqbin[edge], is2GHz)) { + twiceMaxEdgePower = + ar9003_hw_get_direct_edge_power(eep, idx, + edge, is2GHz); + break; + } else if ((edge > 0) && + (freq < ath9k_hw_fbin2freq(ctl_freqbin[edge], + is2GHz))) { + twiceMaxEdgePower = + ar9003_hw_get_indirect_edge_power(eep, idx, + edge, freq, + is2GHz); + /* + * Leave loop - no more affecting edges possible in + * this monotonic increasing list + */ + break; + } + } + return twiceMaxEdgePower; +} + +static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah, + struct ath9k_channel *chan, + u8 *pPwrArray, u16 cfgCtl, + u8 twiceAntennaReduction, + u8 twiceMaxRegulatoryPower, + u16 powerLimit) +{ + struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah); + struct ath_common *common = ath9k_hw_common(ah); + struct ar9300_eeprom *pEepData = &ah->eeprom.ar9300_eep; + u16 twiceMaxEdgePower = AR9300_MAX_RATE_POWER; + static const u16 tpScaleReductionTable[5] = { + 0, 3, 6, 9, AR9300_MAX_RATE_POWER + }; + int i; + int16_t twiceLargestAntenna; + u16 scaledPower = 0, minCtlPower, maxRegAllowedPower; + u16 ctlModesFor11a[] = { + CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40 + }; + u16 ctlModesFor11g[] = { + CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, + CTL_11G_EXT, CTL_2GHT40 + }; + u16 numCtlModes, *pCtlMode, ctlMode, freq; + struct chan_centers centers; + u8 *ctlIndex; + u8 ctlNum; + u16 twiceMinEdgePower; + bool is2ghz = IS_CHAN_2GHZ(chan); + + ath9k_hw_get_channel_centers(ah, chan, ¢ers); + + /* Compute TxPower reduction due to Antenna Gain */ + if (is2ghz) + twiceLargestAntenna = pEepData->modalHeader2G.antennaGain; + else + twiceLargestAntenna = pEepData->modalHeader5G.antennaGain; + + twiceLargestAntenna = (int16_t)min((twiceAntennaReduction) - + twiceLargestAntenna, 0); + + /* + * scaledPower is the minimum of the user input power level + * and the regulatory allowed power level + */ + maxRegAllowedPower = twiceMaxRegulatoryPower + twiceLargestAntenna; + + if (regulatory->tp_scale != ATH9K_TP_SCALE_MAX) { + maxRegAllowedPower -= + (tpScaleReductionTable[(regulatory->tp_scale)] * 2); + } + + scaledPower = min(powerLimit, maxRegAllowedPower); + + /* + * Reduce scaled Power by number of chains active to get + * to per chain tx power level + */ + switch (ar5416_get_ntxchains(ah->txchainmask)) { + case 1: + break; + case 2: + scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + break; + case 3: + scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + break; + } + + scaledPower = max((u16)0, scaledPower); + + /* + * Get target powers from EEPROM - our baseline for TX Power + */ + if (is2ghz) { + /* Setup for CTL modes */ + /* CTL_11B, CTL_11G, CTL_2GHT20 */ + numCtlModes = + ARRAY_SIZE(ctlModesFor11g) - + SUB_NUM_CTL_MODES_AT_2G_40; + pCtlMode = ctlModesFor11g; + if (IS_CHAN_HT40(chan)) + /* All 2G CTL's */ + numCtlModes = ARRAY_SIZE(ctlModesFor11g); + } else { + /* Setup for CTL modes */ + /* CTL_11A, CTL_5GHT20 */ + numCtlModes = ARRAY_SIZE(ctlModesFor11a) - + SUB_NUM_CTL_MODES_AT_5G_40; + pCtlMode = ctlModesFor11a; + if (IS_CHAN_HT40(chan)) + /* All 5G CTL's */ + numCtlModes = ARRAY_SIZE(ctlModesFor11a); + } + + /* + * For MIMO, need to apply regulatory caps individually across + * dynamically running modes: CCK, OFDM, HT20, HT40 + * + * The outer loop walks through each possible applicable runtime mode. + * The inner loop walks through each ctlIndex entry in EEPROM. + * The ctl value is encoded as [7:4] == test group, [3:0] == test mode. + */ + for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) { + bool isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) || + (pCtlMode[ctlMode] == CTL_2GHT40); + if (isHt40CtlMode) + freq = centers.synth_center; + else if (pCtlMode[ctlMode] & EXT_ADDITIVE) + freq = centers.ext_center; + else + freq = centers.ctl_center; + + ath_print(common, ATH_DBG_REGULATORY, + "LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, " + "EXT_ADDITIVE %d\n", + ctlMode, numCtlModes, isHt40CtlMode, + (pCtlMode[ctlMode] & EXT_ADDITIVE)); + + /* walk through each CTL index stored in EEPROM */ + if (is2ghz) { + ctlIndex = pEepData->ctlIndex_2G; + ctlNum = AR9300_NUM_CTLS_2G; + } else { + ctlIndex = pEepData->ctlIndex_5G; + ctlNum = AR9300_NUM_CTLS_5G; + } + + for (i = 0; (i < ctlNum) && ctlIndex[i]; i++) { + ath_print(common, ATH_DBG_REGULATORY, + "LOOP-Ctlidx %d: cfgCtl 0x%2.2x " + "pCtlMode 0x%2.2x ctlIndex 0x%2.2x " + "chan %dn", + i, cfgCtl, pCtlMode[ctlMode], ctlIndex[i], + chan->channel); + + /* + * compare test group from regulatory + * channel list with test mode from pCtlMode + * list + */ + if ((((cfgCtl & ~CTL_MODE_M) | + (pCtlMode[ctlMode] & CTL_MODE_M)) == + ctlIndex[i]) || + (((cfgCtl & ~CTL_MODE_M) | + (pCtlMode[ctlMode] & CTL_MODE_M)) == + ((ctlIndex[i] & CTL_MODE_M) | + SD_NO_CTL))) { + twiceMinEdgePower = + ar9003_hw_get_max_edge_power(pEepData, + freq, i, + is2ghz); + + if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) + /* + * Find the minimum of all CTL + * edge powers that apply to + * this channel + */ + twiceMaxEdgePower = + min(twiceMaxEdgePower, + twiceMinEdgePower); + else { + /* specific */ + twiceMaxEdgePower = + twiceMinEdgePower; + break; + } + } + } + + minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower); + + ath_print(common, ATH_DBG_REGULATORY, + "SEL-Min ctlMode %d pCtlMode %d 2xMaxEdge %d " + "sP %d minCtlPwr %d\n", + ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower, + scaledPower, minCtlPower); + + /* Apply ctl mode to correct target power set */ + switch (pCtlMode[ctlMode]) { + case CTL_11B: + for (i = ALL_TARGET_LEGACY_1L_5L; + i <= ALL_TARGET_LEGACY_11S; i++) + pPwrArray[i] = + (u8)min((u16)pPwrArray[i], + minCtlPower); + break; + case CTL_11A: + case CTL_11G: + for (i = ALL_TARGET_LEGACY_6_24; + i <= ALL_TARGET_LEGACY_54; i++) + pPwrArray[i] = + (u8)min((u16)pPwrArray[i], + minCtlPower); + break; + case CTL_5GHT20: + case CTL_2GHT20: + for (i = ALL_TARGET_HT20_0_8_16; + i <= ALL_TARGET_HT20_21; i++) + pPwrArray[i] = + (u8)min((u16)pPwrArray[i], + minCtlPower); + pPwrArray[ALL_TARGET_HT20_22] = + (u8)min((u16)pPwrArray[ALL_TARGET_HT20_22], + minCtlPower); + pPwrArray[ALL_TARGET_HT20_23] = + (u8)min((u16)pPwrArray[ALL_TARGET_HT20_23], + minCtlPower); + break; + case CTL_5GHT40: + case CTL_2GHT40: + for (i = ALL_TARGET_HT40_0_8_16; + i <= ALL_TARGET_HT40_23; i++) + pPwrArray[i] = + (u8)min((u16)pPwrArray[i], + minCtlPower); + break; + default: + break; + } + } /* end ctl mode checking */ +} + static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah, struct ath9k_channel *chan, u16 cfgCtl, u8 twiceAntennaReduction, u8 twiceMaxRegulatoryPower, u8 powerLimit) { - ah->txpower_limit = powerLimit; - ar9003_hw_set_target_power_eeprom(ah, chan->channel); + struct ath_common *common = ath9k_hw_common(ah); + u8 targetPowerValT2[ar9300RateSize]; + unsigned int i = 0; + + ar9003_hw_set_target_power_eeprom(ah, chan->channel, targetPowerValT2); + ar9003_hw_set_power_per_rate_table(ah, chan, + targetPowerValT2, cfgCtl, + twiceAntennaReduction, + twiceMaxRegulatoryPower, + powerLimit); + + while (i < ar9300RateSize) { + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]); + i++; + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]); + i++; + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]); + i++; + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x\n\n", i, targetPowerValT2[i]); + i++; + } + + /* Write target power array to registers */ + ar9003_hw_tx_power_regwrite(ah, targetPowerValT2); + + /* + * This is the TX power we send back to driver core, + * and it can use to pass to userspace to display our + * currently configured TX power setting. + * + * Since power is rate dependent, use one of the indices + * from the AR9300_Rates enum to select an entry from + * targetPowerValT2[] to report. Currently returns the + * power for HT40 MCS 0, HT20 MCS 0, or OFDM 6 Mbps + * as CCK power is less interesting (?). + */ + i = ALL_TARGET_LEGACY_6_24; /* legacy */ + if (IS_CHAN_HT40(chan)) + i = ALL_TARGET_HT40_0_8_16; /* ht40 */ + else if (IS_CHAN_HT20(chan)) + i = ALL_TARGET_HT20_0_8_16; /* ht20 */ + + ah->txpower_limit = targetPowerValT2[i]; + ar9003_hw_calibration_apply(ah, chan->channel); } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c index 49e0c865..7c38229 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c @@ -577,10 +577,11 @@ static bool create_pa_curve(u32 *data_L, u32 *data_U, u32 *pa_table, u16 *gain) } void ar9003_paprd_populate_single_table(struct ath_hw *ah, - struct ath9k_channel *chan, int chain) + struct ath9k_hw_cal_data *caldata, + int chain) { - u32 *paprd_table_val = chan->pa_table[chain]; - u32 small_signal_gain = chan->small_signal_gain[chain]; + u32 *paprd_table_val = caldata->pa_table[chain]; + u32 small_signal_gain = caldata->small_signal_gain[chain]; u32 training_power; u32 reg = 0; int i; @@ -654,17 +655,17 @@ int ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain) } EXPORT_SYMBOL(ar9003_paprd_setup_gain_table); -int ar9003_paprd_create_curve(struct ath_hw *ah, struct ath9k_channel *chan, - int chain) +int ar9003_paprd_create_curve(struct ath_hw *ah, + struct ath9k_hw_cal_data *caldata, int chain) { - u16 *small_signal_gain = &chan->small_signal_gain[chain]; - u32 *pa_table = chan->pa_table[chain]; + u16 *small_signal_gain = &caldata->small_signal_gain[chain]; + u32 *pa_table = caldata->pa_table[chain]; u32 *data_L, *data_U; int i, status = 0; u32 *buf; u32 reg; - memset(chan->pa_table[chain], 0, sizeof(chan->pa_table[chain])); + memset(caldata->pa_table[chain], 0, sizeof(caldata->pa_table[chain])); buf = kmalloc(2 * 48 * sizeof(u32), GFP_ATOMIC); if (!buf) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index a753a43..a491854 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -542,7 +542,11 @@ static void ar9003_hw_prog_ini(struct ath_hw *ah, u32 reg = INI_RA(iniArr, i, 0); u32 val = INI_RA(iniArr, i, column); - REG_WRITE(ah, reg, val); + if (reg >= 0x16000 && reg < 0x17000) + ath9k_hw_analog_shift_regwrite(ah, reg, val); + else + REG_WRITE(ah, reg, val); + DO_DELAY(regWrites); } } diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 998ae2c..07f26ee 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -510,7 +510,7 @@ void ath_deinit_leds(struct ath_softc *sc); #define SC_OP_BEACONS BIT(1) #define SC_OP_RXAGGR BIT(2) #define SC_OP_TXAGGR BIT(3) -#define SC_OP_FULL_RESET BIT(4) +#define SC_OP_OFFCHANNEL BIT(4) #define SC_OP_PREAMBLE_SHORT BIT(5) #define SC_OP_PROTECT_ENABLE BIT(6) #define SC_OP_RXFLUSH BIT(7) @@ -609,6 +609,7 @@ struct ath_softc { struct ath_wiphy { struct ath_softc *sc; /* shared for all virtual wiphys */ struct ieee80211_hw *hw; + struct ath9k_hw_cal_data caldata; enum ath_wiphy_state { ATH_WIPHY_INACTIVE, ATH_WIPHY_ACTIVE, diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index 139289e..4520869 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -22,23 +22,6 @@ /* We can tune this as we go by monitoring really low values */ #define ATH9K_NF_TOO_LOW -60 -/* AR5416 may return very high value (like -31 dBm), in those cases the nf - * is incorrect and we should use the static NF value. Later we can try to - * find out why they are reporting these values */ - -static bool ath9k_hw_nf_in_range(struct ath_hw *ah, s16 nf) -{ - if (nf > ATH9K_NF_TOO_LOW) { - ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE, - "noise floor value detected (%d) is " - "lower than what we think is a " - "reasonable value (%d)\n", - nf, ATH9K_NF_TOO_LOW); - return false; - } - return true; -} - static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer) { int16_t nfval; @@ -121,6 +104,19 @@ void ath9k_hw_reset_calibration(struct ath_hw *ah, ah->cal_samples = 0; } +static s16 ath9k_hw_get_default_nf(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + struct ath_nf_limits *limit; + + if (!chan || IS_CHAN_2GHZ(chan)) + limit = &ah->nf_2g; + else + limit = &ah->nf_5g; + + return limit->nominal; +} + /* This is done for the currently configured channel */ bool ath9k_hw_reset_calvalid(struct ath_hw *ah) { @@ -128,7 +124,7 @@ bool ath9k_hw_reset_calvalid(struct ath_hw *ah) struct ieee80211_conf *conf = &common->hw->conf; struct ath9k_cal_list *currCal = ah->cal_list_curr; - if (!ah->curchan) + if (!ah->caldata) return true; if (!AR_SREV_9100(ah) && !AR_SREV_9160_10_OR_LATER(ah)) @@ -151,37 +147,55 @@ bool ath9k_hw_reset_calvalid(struct ath_hw *ah) "Resetting Cal %d state for channel %u\n", currCal->calData->calType, conf->channel->center_freq); - ah->curchan->CalValid &= ~currCal->calData->calType; + ah->caldata->CalValid &= ~currCal->calData->calType; currCal->calState = CAL_WAITING; return false; } EXPORT_SYMBOL(ath9k_hw_reset_calvalid); -void ath9k_hw_start_nfcal(struct ath_hw *ah) +void ath9k_hw_start_nfcal(struct ath_hw *ah, bool update) { + if (ah->caldata) + ah->caldata->nfcal_pending = true; + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_ENABLE_NF); - REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, + + if (update) + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_NO_UPDATE_NF); + else + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NO_UPDATE_NF); + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); } void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) { - struct ath9k_nfcal_hist *h; + struct ath9k_nfcal_hist *h = NULL; unsigned i, j; int32_t val; u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; struct ath_common *common = ath9k_hw_common(ah); + s16 default_nf = ath9k_hw_get_default_nf(ah, chan); - h = ah->nfCalHist; + if (ah->caldata) + h = ah->caldata->nfCalHist; for (i = 0; i < NUM_NF_READINGS; i++) { if (chainmask & (1 << i)) { + s16 nfval; + + if (h) + nfval = h[i].privNF; + else + nfval = default_nf; + val = REG_READ(ah, ah->nf_regs[i]); val &= 0xFFFFFE00; - val |= (((u32) (h[i].privNF) << 1) & 0x1ff); + val |= (((u32) nfval << 1) & 0x1ff); REG_WRITE(ah, ah->nf_regs[i], val); } } @@ -277,22 +291,25 @@ static void ath9k_hw_nf_sanitize(struct ath_hw *ah, s16 *nf) } } -int16_t ath9k_hw_getnf(struct ath_hw *ah, - struct ath9k_channel *chan) +bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan) { struct ath_common *common = ath9k_hw_common(ah); int16_t nf, nfThresh; int16_t nfarray[NUM_NF_READINGS] = { 0 }; struct ath9k_nfcal_hist *h; struct ieee80211_channel *c = chan->chan; + struct ath9k_hw_cal_data *caldata = ah->caldata; + + if (!caldata) + return false; chan->channelFlags &= (~CHANNEL_CW_INT); if (REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) { ath_print(common, ATH_DBG_CALIBRATE, "NF did not complete in calibration window\n"); nf = 0; - chan->rawNoiseFloor = nf; - return chan->rawNoiseFloor; + caldata->rawNoiseFloor = nf; + return false; } else { ath9k_hw_do_getnf(ah, nfarray); ath9k_hw_nf_sanitize(ah, nfarray); @@ -307,47 +324,40 @@ int16_t ath9k_hw_getnf(struct ath_hw *ah, } } - h = ah->nfCalHist; - + h = caldata->nfCalHist; + caldata->nfcal_pending = false; ath9k_hw_update_nfcal_hist_buffer(h, nfarray); - chan->rawNoiseFloor = h[0].privNF; - - return chan->rawNoiseFloor; + caldata->rawNoiseFloor = h[0].privNF; + return true; } -void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah) +void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah, + struct ath9k_channel *chan) { - struct ath_nf_limits *limit; + struct ath9k_nfcal_hist *h; + s16 default_nf; int i, j; - if (!ah->curchan || IS_CHAN_2GHZ(ah->curchan)) - limit = &ah->nf_2g; - else - limit = &ah->nf_5g; + if (!ah->caldata) + return; + h = ah->caldata->nfCalHist; + default_nf = ath9k_hw_get_default_nf(ah, chan); for (i = 0; i < NUM_NF_READINGS; i++) { - ah->nfCalHist[i].currIndex = 0; - ah->nfCalHist[i].privNF = limit->nominal; - ah->nfCalHist[i].invalidNFcount = - AR_PHY_CCA_FILTERWINDOW_LENGTH; + h[i].currIndex = 0; + h[i].privNF = default_nf; + h[i].invalidNFcount = AR_PHY_CCA_FILTERWINDOW_LENGTH; for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++) { - ah->nfCalHist[i].nfCalBuffer[j] = limit->nominal; + h[i].nfCalBuffer[j] = default_nf; } } } s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan) { - s16 nf; - - if (chan->rawNoiseFloor == 0) - nf = -96; - else - nf = chan->rawNoiseFloor; - - if (!ath9k_hw_nf_in_range(ah, nf)) - nf = ATH_DEFAULT_NOISE_FLOOR; + if (!ah->caldata || !ah->caldata->rawNoiseFloor) + return ath9k_hw_get_default_nf(ah, chan); - return nf; + return ah->caldata->rawNoiseFloor; } EXPORT_SYMBOL(ath9k_hw_getchan_noise); diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h index cd60d09..0a304b3 100644 --- a/drivers/net/wireless/ath/ath9k/calib.h +++ b/drivers/net/wireless/ath/ath9k/calib.h @@ -108,11 +108,11 @@ struct ath9k_pacal_info{ }; bool ath9k_hw_reset_calvalid(struct ath_hw *ah); -void ath9k_hw_start_nfcal(struct ath_hw *ah); +void ath9k_hw_start_nfcal(struct ath_hw *ah, bool update); void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan); -int16_t ath9k_hw_getnf(struct ath_hw *ah, - struct ath9k_channel *chan); -void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah); +bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan); +void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah, + struct ath9k_channel *chan); s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan); void ath9k_hw_reset_calibration(struct ath_hw *ah, struct ath9k_cal_list *currCal); diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h index 3756400..43b9e21 100644 --- a/drivers/net/wireless/ath/ath9k/htc.h +++ b/drivers/net/wireless/ath/ath9k/htc.h @@ -353,6 +353,8 @@ struct ath9k_htc_priv { u16 seq_no; u32 bmiss_cnt; + struct ath9k_hw_cal_data caldata[38]; + spinlock_t beacon_lock; bool tx_queues_stop; diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index cf9bcc6..ebed9d1 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -125,6 +125,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv, struct ieee80211_conf *conf = &common->hw->conf; bool fastcc = true; struct ieee80211_channel *channel = hw->conf.channel; + struct ath9k_hw_cal_data *caldata; enum htc_phymode mode; __be16 htc_mode; u8 cmd_rsp; @@ -149,7 +150,8 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv, priv->ah->curchan->channel, channel->center_freq, conf_is_ht(conf), conf_is_ht40(conf)); - ret = ath9k_hw_reset(ah, hchan, fastcc); + caldata = &priv->caldata[channel->hw_value]; + ret = ath9k_hw_reset(ah, hchan, caldata, fastcc); if (ret) { ath_print(common, ATH_DBG_FATAL, "Unable to reset channel (%u Mhz) " @@ -1028,7 +1030,7 @@ static void ath9k_htc_radio_enable(struct ieee80211_hw *hw) ah->curchan = ath9k_cmn_get_curchannel(hw, ah); /* Reset the HW */ - ret = ath9k_hw_reset(ah, ah->curchan, false); + ret = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); if (ret) { ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d " @@ -1091,7 +1093,7 @@ static void ath9k_htc_radio_disable(struct ieee80211_hw *hw) ah->curchan = ath9k_cmn_get_curchannel(hw, ah); /* Reset the HW */ - ret = ath9k_hw_reset(ah, ah->curchan, false); + ret = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); if (ret) { ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d " @@ -1179,7 +1181,7 @@ static int ath9k_htc_start(struct ieee80211_hw *hw) ath9k_hw_configpcipowersave(ah, 0, 0); ath9k_hw_htc_resetinit(ah); - ret = ath9k_hw_reset(ah, init_channel, false); + ret = ath9k_hw_reset(ah, init_channel, ah->caldata, false); if (ret) { ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d " diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 8d291cc..3384ca1 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -610,7 +610,6 @@ static int __ath9k_hw_init(struct ath_hw *ah) else ah->tx_trig_level = (AR_FTRIG_512B >> AR_FTRIG_S); - ath9k_init_nfcal_hist_buffer(ah); ah->bb_watchdog_timeout_ms = 25; common->state = ATH_HW_INITIALIZED; @@ -1183,9 +1182,6 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, ath9k_hw_spur_mitigate_freq(ah, chan); - if (!chan->oneTimeCalsDone) - chan->oneTimeCalsDone = true; - return true; } @@ -1218,7 +1214,7 @@ bool ath9k_hw_check_alive(struct ath_hw *ah) EXPORT_SYMBOL(ath9k_hw_check_alive); int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, - bool bChannelChange) + struct ath9k_hw_cal_data *caldata, bool bChannelChange) { struct ath_common *common = ath9k_hw_common(ah); u32 saveLedState; @@ -1243,9 +1239,19 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) return -EIO; - if (curchan && !ah->chip_fullsleep) + if (curchan && !ah->chip_fullsleep && ah->caldata) ath9k_hw_getnf(ah, curchan); + ah->caldata = caldata; + if (caldata && + (chan->channel != caldata->channel || + (chan->channelFlags & ~CHANNEL_CW_INT) != + (caldata->channelFlags & ~CHANNEL_CW_INT))) { + /* Operating channel changed, reset channel calibration data */ + memset(caldata, 0, sizeof(*caldata)); + ath9k_init_nfcal_hist_buffer(ah, chan); + } + if (bChannelChange && (ah->chip_fullsleep != true) && (ah->curchan != NULL) && @@ -1256,7 +1262,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (ath9k_hw_channel_change(ah, chan)) { ath9k_hw_loadnf(ah, ah->curchan); - ath9k_hw_start_nfcal(ah); + ath9k_hw_start_nfcal(ah, true); return 0; } } @@ -1461,11 +1467,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (ah->btcoex_hw.enabled) ath9k_hw_btcoex_enable(ah); - if (AR_SREV_9300_20_OR_LATER(ah)) { - ath9k_hw_loadnf(ah, curchan); - ath9k_hw_start_nfcal(ah); + if (AR_SREV_9300_20_OR_LATER(ah)) ar9003_hw_bb_watchdog_config(ah); - } return 0; } diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 2d30efc..399f7c1 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -346,19 +346,25 @@ enum ath9k_int { CHANNEL_HT40PLUS | \ CHANNEL_HT40MINUS) -struct ath9k_channel { - struct ieee80211_channel *chan; +struct ath9k_hw_cal_data { u16 channel; u32 channelFlags; - u32 chanmode; int32_t CalValid; - bool oneTimeCalsDone; int8_t iCoff; int8_t qCoff; int16_t rawNoiseFloor; bool paprd_done; + bool nfcal_pending; u16 small_signal_gain[AR9300_MAX_CHAINS]; u32 pa_table[AR9300_MAX_CHAINS][PAPRD_TABLE_SZ]; + struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS]; +}; + +struct ath9k_channel { + struct ieee80211_channel *chan; + u16 channel; + u32 channelFlags; + u32 chanmode; }; #define IS_CHAN_G(_c) ((((_c)->channelFlags & (CHANNEL_G)) == CHANNEL_G) || \ @@ -669,7 +675,7 @@ struct ath_hw { enum nl80211_iftype opmode; enum ath9k_power_mode power_mode; - struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS]; + struct ath9k_hw_cal_data *caldata; struct ath9k_pacal_info pacal_info; struct ar5416Stats stats; struct ath9k_tx_queue_info txq[ATH9K_NUM_TX_QUEUES]; @@ -863,7 +869,7 @@ const char *ath9k_hw_probe(u16 vendorid, u16 devid); void ath9k_hw_deinit(struct ath_hw *ah); int ath9k_hw_init(struct ath_hw *ah); int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, - bool bChannelChange); + struct ath9k_hw_cal_data *caldata, bool bChannelChange); int ath9k_hw_fill_cap_info(struct ath_hw *ah); u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan); @@ -958,9 +964,10 @@ void ar9003_hw_bb_watchdog_read(struct ath_hw *ah); void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah); void ar9003_paprd_enable(struct ath_hw *ah, bool val); void ar9003_paprd_populate_single_table(struct ath_hw *ah, - struct ath9k_channel *chan, int chain); -int ar9003_paprd_create_curve(struct ath_hw *ah, struct ath9k_channel *chan, - int chain); + struct ath9k_hw_cal_data *caldata, + int chain); +int ar9003_paprd_create_curve(struct ath_hw *ah, + struct ath9k_hw_cal_data *caldata, int chain); int ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain); int ar9003_paprd_init_table(struct ath_hw *ah); bool ar9003_paprd_is_done(struct ath_hw *ah); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 0429dda..3caa323 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -154,6 +154,27 @@ void ath9k_ps_restore(struct ath_softc *sc) spin_unlock_irqrestore(&sc->sc_pm_lock, flags); } +static void ath_start_ani(struct ath_common *common) +{ + struct ath_hw *ah = common->ah; + unsigned long timestamp = jiffies_to_msecs(jiffies); + struct ath_softc *sc = (struct ath_softc *) common->priv; + + if (!(sc->sc_flags & SC_OP_ANI_RUN)) + return; + + if (sc->sc_flags & SC_OP_OFFCHANNEL) + return; + + common->ani.longcal_timer = timestamp; + common->ani.shortcal_timer = timestamp; + common->ani.checkani_timer = timestamp; + + mod_timer(&common->ani.timer, + jiffies + + msecs_to_jiffies((u32)ah->config.ani_poll_interval)); +} + /* * Set/change channels. If the channel is really being changed, it's done * by reseting the chip. To accomplish this we must first cleanup any pending @@ -162,16 +183,23 @@ void ath9k_ps_restore(struct ath_softc *sc) int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, struct ath9k_channel *hchan) { + struct ath_wiphy *aphy = hw->priv; struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); struct ieee80211_conf *conf = &common->hw->conf; bool fastcc = true, stopped; struct ieee80211_channel *channel = hw->conf.channel; + struct ath9k_hw_cal_data *caldata = NULL; int r; if (sc->sc_flags & SC_OP_INVALID) return -EIO; + del_timer_sync(&common->ani.timer); + cancel_work_sync(&sc->paprd_work); + cancel_work_sync(&sc->hw_check_work); + cancel_delayed_work_sync(&sc->tx_complete_work); + ath9k_ps_wakeup(sc); /* @@ -191,9 +219,12 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, * to flush data frames already in queue because of * changing channel. */ - if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET)) + if (!stopped || !(sc->sc_flags & SC_OP_OFFCHANNEL)) fastcc = false; + if (!(sc->sc_flags & SC_OP_OFFCHANNEL)) + caldata = &aphy->caldata; + ath_print(common, ATH_DBG_CONFIG, "(%u MHz) -> (%u MHz), conf_is_ht40: %d\n", sc->sc_ah->curchan->channel, @@ -201,7 +232,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, hchan, fastcc); + r = ath9k_hw_reset(ah, hchan, caldata, fastcc); if (r) { ath_print(common, ATH_DBG_FATAL, "Unable to reset channel (%u MHz), " @@ -212,8 +243,6 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, } spin_unlock_bh(&sc->sc_resetlock); - sc->sc_flags &= ~SC_OP_FULL_RESET; - if (ath_startrecv(sc) != 0) { ath_print(common, ATH_DBG_FATAL, "Unable to restart recv logic\n"); @@ -225,6 +254,12 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, ath_update_txpow(sc); ath9k_hw_set_interrupts(ah, ah->imask); + if (!(sc->sc_flags & (SC_OP_OFFCHANNEL | SC_OP_SCANNING))) { + ath_start_ani(common); + ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0); + ath_beacon_config(sc, NULL); + } + ps_restore: ath9k_ps_restore(sc); return r; @@ -233,17 +268,19 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, static void ath_paprd_activate(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; + struct ath9k_hw_cal_data *caldata = ah->caldata; int chain; - if (!ah->curchan->paprd_done) + if (!caldata || !caldata->paprd_done) return; ath9k_ps_wakeup(sc); + ar9003_paprd_enable(ah, false); for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) { if (!(ah->caps.tx_chainmask & BIT(chain))) continue; - ar9003_paprd_populate_single_table(ah, ah->curchan, chain); + ar9003_paprd_populate_single_table(ah, caldata, chain); } ar9003_paprd_enable(ah, true); @@ -261,6 +298,7 @@ void ath_paprd_calibrate(struct work_struct *work) int band = hw->conf.channel->band; struct ieee80211_supported_band *sband = &sc->sbands[band]; struct ath_tx_control txctl; + struct ath9k_hw_cal_data *caldata = ah->caldata; int qnum, ftype; int chain_ok = 0; int chain; @@ -268,6 +306,9 @@ void ath_paprd_calibrate(struct work_struct *work) int time_left; int i; + if (!caldata) + return; + skb = alloc_skb(len, GFP_KERNEL); if (!skb) return; @@ -322,7 +363,7 @@ void ath_paprd_calibrate(struct work_struct *work) if (!ar9003_paprd_is_done(ah)) break; - if (ar9003_paprd_create_curve(ah, ah->curchan, chain) != 0) + if (ar9003_paprd_create_curve(ah, caldata, chain) != 0) break; chain_ok = 1; @@ -330,7 +371,7 @@ void ath_paprd_calibrate(struct work_struct *work) kfree_skb(skb); if (chain_ok) { - ah->curchan->paprd_done = true; + caldata->paprd_done = true; ath_paprd_activate(sc); } @@ -439,33 +480,14 @@ set_timer: cal_interval = min(cal_interval, (u32)short_cal_interval); mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval)); - if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && - !(sc->sc_flags & SC_OP_SCANNING)) { - if (!sc->sc_ah->curchan->paprd_done) + if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) { + if (!ah->caldata->paprd_done) ieee80211_queue_work(sc->hw, &sc->paprd_work); else ath_paprd_activate(sc); } } -static void ath_start_ani(struct ath_common *common) -{ - struct ath_hw *ah = common->ah; - unsigned long timestamp = jiffies_to_msecs(jiffies); - struct ath_softc *sc = (struct ath_softc *) common->priv; - - if (!(sc->sc_flags & SC_OP_ANI_RUN)) - return; - - common->ani.longcal_timer = timestamp; - common->ani.shortcal_timer = timestamp; - common->ani.checkani_timer = timestamp; - - mod_timer(&common->ani.timer, - jiffies + - msecs_to_jiffies((u32)ah->config.ani_poll_interval)); -} - /* * Update tx/rx chainmask. For legacy association, * hard code chainmask to 1x1, for 11n association, use @@ -477,7 +499,7 @@ void ath_update_chainmask(struct ath_softc *sc, int is_ht) struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); - if ((sc->sc_flags & SC_OP_SCANNING) || is_ht || + if ((sc->sc_flags & SC_OP_OFFCHANNEL) || is_ht || (ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE)) { common->tx_chainmask = ah->caps.tx_chainmask; common->rx_chainmask = ah->caps.rx_chainmask; @@ -817,7 +839,7 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw) ah->curchan = ath_get_curchannel(sc, sc->hw); spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, ah->curchan, false); + r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); if (r) { ath_print(common, ATH_DBG_FATAL, "Unable to reset channel (%u MHz), " @@ -877,7 +899,7 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw) ah->curchan = ath_get_curchannel(sc, hw); spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, ah->curchan, false); + r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); if (r) { ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL, "Unable to reset channel (%u MHz), " @@ -910,7 +932,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) ath_flushrecv(sc); spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false); + r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false); if (r) ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d\n", r); @@ -1085,7 +1107,7 @@ static int ath9k_start(struct ieee80211_hw *hw) * and then setup of the interrupt mask. */ spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, init_channel, false); + r = ath9k_hw_reset(ah, init_channel, ah->caldata, false); if (r) { ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d " @@ -1579,6 +1601,10 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) aphy->chan_idx = pos; aphy->chan_is_ht = conf_is_ht(conf); + if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) + sc->sc_flags |= SC_OP_OFFCHANNEL; + else + sc->sc_flags &= ~SC_OP_OFFCHANNEL; if (aphy->state == ATH_WIPHY_SCAN || aphy->state == ATH_WIPHY_ACTIVE) @@ -1990,7 +2016,6 @@ static void ath9k_sw_scan_start(struct ieee80211_hw *hw) { struct ath_wiphy *aphy = hw->priv; struct ath_softc *sc = aphy->sc; - struct ath_common *common = ath9k_hw_common(sc->sc_ah); mutex_lock(&sc->mutex); if (ath9k_wiphy_scanning(sc)) { @@ -2008,10 +2033,6 @@ static void ath9k_sw_scan_start(struct ieee80211_hw *hw) aphy->state = ATH_WIPHY_SCAN; ath9k_wiphy_pause_all_forced(sc, aphy); sc->sc_flags |= SC_OP_SCANNING; - del_timer_sync(&common->ani.timer); - cancel_work_sync(&sc->paprd_work); - cancel_work_sync(&sc->hw_check_work); - cancel_delayed_work_sync(&sc->tx_complete_work); mutex_unlock(&sc->mutex); } @@ -2023,15 +2044,10 @@ static void ath9k_sw_scan_complete(struct ieee80211_hw *hw) { struct ath_wiphy *aphy = hw->priv; struct ath_softc *sc = aphy->sc; - struct ath_common *common = ath9k_hw_common(sc->sc_ah); mutex_lock(&sc->mutex); aphy->state = ATH_WIPHY_ACTIVE; sc->sc_flags &= ~SC_OP_SCANNING; - sc->sc_flags |= SC_OP_FULL_RESET; - ath_start_ani(common); - ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0); - ath_beacon_config(sc, NULL); mutex_unlock(&sc->mutex); } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index da0cfe9..a3fc987 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1140,6 +1140,11 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) if (flush) goto requeue; + retval = ath9k_rx_skb_preprocess(common, hw, hdr, &rs, + rxs, &decrypt_error); + if (retval) + goto requeue; + rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp; if (rs.rs_tstamp > tsf_lower && unlikely(rs.rs_tstamp - tsf_lower > 0x10000000)) @@ -1149,11 +1154,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) unlikely(tsf_lower - rs.rs_tstamp > 0x10000000)) rxs->mactime += 0x100000000ULL; - retval = ath9k_rx_skb_preprocess(common, hw, hdr, &rs, - rxs, &decrypt_error); - if (retval) - goto requeue; - /* Ensure we always have an skb to requeue once we are done * processing the current buffer's skb */ requeue_skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_ATOMIC); diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 501b728..4dda14e 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -120,26 +120,14 @@ static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid) list_add_tail(&ac->list, &txq->axq_acq); } -static void ath_tx_pause_tid(struct ath_softc *sc, struct ath_atx_tid *tid) -{ - struct ath_txq *txq = &sc->tx.txq[tid->ac->qnum]; - - spin_lock_bh(&txq->axq_lock); - tid->paused++; - spin_unlock_bh(&txq->axq_lock); -} - static void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid) { struct ath_txq *txq = &sc->tx.txq[tid->ac->qnum]; - BUG_ON(tid->paused <= 0); - spin_lock_bh(&txq->axq_lock); - - tid->paused--; + WARN_ON(!tid->paused); - if (tid->paused > 0) - goto unlock; + spin_lock_bh(&txq->axq_lock); + tid->paused = false; if (list_empty(&tid->buf_q)) goto unlock; @@ -157,15 +145,10 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) struct list_head bf_head; INIT_LIST_HEAD(&bf_head); - BUG_ON(tid->paused <= 0); - spin_lock_bh(&txq->axq_lock); + WARN_ON(!tid->paused); - tid->paused--; - - if (tid->paused > 0) { - spin_unlock_bh(&txq->axq_lock); - return; - } + spin_lock_bh(&txq->axq_lock); + tid->paused = false; while (!list_empty(&tid->buf_q)) { bf = list_first_entry(&tid->buf_q, struct ath_buf, list); @@ -811,7 +794,7 @@ void ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, an = (struct ath_node *)sta->drv_priv; txtid = ATH_AN_2_TID(an, tid); txtid->state |= AGGR_ADDBA_PROGRESS; - ath_tx_pause_tid(sc, txtid); + txtid->paused = true; *ssn = txtid->seq_start; } @@ -835,10 +818,9 @@ void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) return; } - ath_tx_pause_tid(sc, txtid); - /* drop all software retried frames and mark this TID */ spin_lock_bh(&txq->axq_lock); + txtid->paused = true; while (!list_empty(&txtid->buf_q)) { bf = list_first_entry(&txtid->buf_q, struct ath_buf, list); if (!bf_isretried(bf)) { @@ -1181,7 +1163,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) "Failed to stop TX DMA. Resetting hardware!\n"); spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false); + r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false); if (r) ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d\n", diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index c24c5ef..16bbfa3 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -1924,6 +1924,10 @@ static int ipw2100_net_init(struct net_device *dev) bg_band->channels = kzalloc(geo->bg_channels * sizeof(struct ieee80211_channel), GFP_KERNEL); + if (!bg_band->channels) { + ipw2100_down(priv); + return -ENOMEM; + } /* translate geo->bg to bg_band.channels */ for (i = 0; i < geo->bg_channels; i++) { bg_band->channels[i].band = IEEE80211_BAND_2GHZ; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c index f052c6d..d706b8a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c @@ -980,7 +980,7 @@ ssize_t iwl_ucode_bt_stats_read(struct file *file, le32_to_cpu(bt->lo_priority_tx_req_cnt), accum_bt->lo_priority_tx_req_cnt); pos += scnprintf(buf + pos, bufsz - pos, - "lo_priority_rx_denied_cnt:\t%u\t\t\t%u\n", + "lo_priority_tx_denied_cnt:\t%u\t\t\t%u\n", le32_to_cpu(bt->lo_priority_tx_denied_cnt), accum_bt->lo_priority_tx_denied_cnt); pos += scnprintf(buf + pos, bufsz - pos, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c index a1b6d20..9dd9e64 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c @@ -1429,7 +1429,7 @@ int iwlagn_manage_ibss_station(struct iwl_priv *priv, void iwl_free_tfds_in_queue(struct iwl_priv *priv, int sta_id, int tid, int freed) { - WARN_ON(!spin_is_locked(&priv->sta_lock)); + lockdep_assert_held(&priv->sta_lock); if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed) priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 35c86d2..23e5c42 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -300,8 +300,9 @@ static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, struct ieee80211_sta *sta) { int ret = -EAGAIN; + u32 load = rs_tl_get_load(lq_data, tid); - if (rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) { + if (load > IWL_AGG_LOAD_THRESHOLD) { IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n", sta->addr, tid); ret = ieee80211_start_tx_ba_session(sta, tid); @@ -311,12 +312,14 @@ static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, * this might be cause by reloading firmware * stop the tx ba session here */ - IWL_DEBUG_HT(priv, "Fail start Tx agg on tid: %d\n", + IWL_ERR(priv, "Fail start Tx agg on tid: %d\n", tid); ieee80211_stop_tx_ba_session(sta, tid); } - } else - IWL_ERR(priv, "Fail finding valid aggregation tid: %d\n", tid); + } else { + IWL_ERR(priv, "Aggregation not enabled for tid %d " + "because load = %u\n", tid, load); + } return ret; } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c index 55a1b31..d04502d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c @@ -1117,7 +1117,7 @@ int iwlagn_txq_check_empty(struct iwl_priv *priv, u8 *addr = priv->stations[sta_id].sta.sta.addr; struct iwl_tid_data *tid_data = &priv->stations[sta_id].tid[tid]; - WARN_ON(!spin_is_locked(&priv->sta_lock)); + lockdep_assert_held(&priv->sta_lock); switch (priv->stations[sta_id].tid[tid].agg.state) { case IWL_EMPTYING_HW_QUEUE_DELBA: @@ -1331,7 +1331,14 @@ void iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, tid = ba_resp->tid; agg = &priv->stations[sta_id].tid[tid].agg; if (unlikely(agg->txq_id != scd_flow)) { - IWL_ERR(priv, "BA scd_flow %d does not match txq_id %d\n", + /* + * FIXME: this is a uCode bug which need to be addressed, + * log the information and return for now! + * since it is possible happen very often and in order + * not to fill the syslog, don't enable the logging by default + */ + IWL_DEBUG_TX_REPLY(priv, + "BA scd_flow %d does not match txq_id %d\n", scd_flow, agg->txq_id); return; } diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 8024d44..8ccb6d2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2000,6 +2000,7 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct iwl_priv *priv = hw->priv; + bool scan_completed = false; IWL_DEBUG_MAC80211(priv, "enter\n"); @@ -2013,7 +2014,7 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw, if (priv->vif == vif) { priv->vif = NULL; if (priv->scan_vif == vif) { - ieee80211_scan_completed(priv->hw, true); + scan_completed = true; priv->scan_vif = NULL; priv->scan_request = NULL; } @@ -2021,6 +2022,9 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw, } mutex_unlock(&priv->mutex); + if (scan_completed) + ieee80211_scan_completed(priv->hw, true); + IWL_DEBUG_MAC80211(priv, "leave\n"); } diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index 5c2bcef..0b961a3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -71,7 +71,7 @@ do { \ #define IWL_DEBUG(__priv, level, fmt, args...) #define IWL_DEBUG_LIMIT(__priv, level, fmt, args...) static inline void iwl_print_hex_dump(struct iwl_priv *priv, int level, - void *p, u32 len) + const void *p, u32 len) {} #endif /* CONFIG_IWLWIFI_DEBUG */ diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h index ae7319b..4cf864c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h +++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h @@ -193,7 +193,7 @@ TRACE_EVENT(iwlwifi_dev_tx, __entry->framelen = buf0_len + buf1_len; memcpy(__get_dynamic_array(tfd), tfd, tfdlen); memcpy(__get_dynamic_array(buf0), buf0, buf0_len); - memcpy(__get_dynamic_array(buf1), buf1, buf0_len); + memcpy(__get_dynamic_array(buf1), buf1, buf1_len); ), TP_printk("[%p] TX %.2x (%zu bytes)", __entry->priv, diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index b0c6b04..a4b3663 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -298,7 +298,7 @@ EXPORT_SYMBOL(iwl_init_scan_params); static int iwl_scan_initiate(struct iwl_priv *priv, struct ieee80211_vif *vif) { - WARN_ON(!mutex_is_locked(&priv->mutex)); + lockdep_assert_held(&priv->mutex); IWL_DEBUG_INFO(priv, "Starting scan...\n"); set_bit(STATUS_SCANNING, &priv->status); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 9511f03..7e0829b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -773,7 +773,7 @@ static int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty) int iwl_restore_default_wep_keys(struct iwl_priv *priv) { - WARN_ON(!mutex_is_locked(&priv->mutex)); + lockdep_assert_held(&priv->mutex); return iwl_send_static_wepkey_cmd(priv, 0); } @@ -784,7 +784,7 @@ int iwl_remove_default_wep_key(struct iwl_priv *priv, { int ret; - WARN_ON(!mutex_is_locked(&priv->mutex)); + lockdep_assert_held(&priv->mutex); IWL_DEBUG_WEP(priv, "Removing default WEP key: idx=%d\n", keyconf->keyidx); @@ -808,7 +808,7 @@ int iwl_set_default_wep_key(struct iwl_priv *priv, { int ret; - WARN_ON(!mutex_is_locked(&priv->mutex)); + lockdep_assert_held(&priv->mutex); if (keyconf->keylen != WEP_KEY_LEN_128 && keyconf->keylen != WEP_KEY_LEN_64) { diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 25f9027..8e9fbfd 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -257,6 +257,29 @@ static int lbs_add_supported_rates_tlv(u8 *tlv) return sizeof(rate_tlv->header) + i; } +/* Add common rates from a TLV and return the new end of the TLV */ +static u8 * +add_ie_rates(u8 *tlv, const u8 *ie, int *nrates) +{ + int hw, ap, ap_max = ie[1]; + u8 hw_rate; + + /* Advance past IE header */ + ie += 2; + + lbs_deb_hex(LBS_DEB_ASSOC, "AP IE Rates", (u8 *) ie, ap_max); + + for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { + hw_rate = lbs_rates[hw].bitrate / 5; + for (ap = 0; ap < ap_max; ap++) { + if (hw_rate == (ie[ap] & 0x7f)) { + *tlv++ = ie[ap]; + *nrates = *nrates + 1; + } + } + } + return tlv; +} /* * Adds a TLV with all rates the hardware *and* BSS supports. @@ -264,8 +287,11 @@ static int lbs_add_supported_rates_tlv(u8 *tlv) static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss) { struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; - const u8 *rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); - int n; + const u8 *rates_eid, *ext_rates_eid; + int n = 0; + + rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); + ext_rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_EXT_SUPP_RATES); /* * 01 00 TLV_TYPE_RATES @@ -275,26 +301,21 @@ static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss) rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); tlv += sizeof(rate_tlv->header); - if (!rates_eid) { + /* Add basic rates */ + if (rates_eid) { + tlv = add_ie_rates(tlv, rates_eid, &n); + + /* Add extended rates, if any */ + if (ext_rates_eid) + tlv = add_ie_rates(tlv, ext_rates_eid, &n); + } else { + lbs_deb_assoc("assoc: bss had no basic rate IE\n"); /* Fallback: add basic 802.11b rates */ *tlv++ = 0x82; *tlv++ = 0x84; *tlv++ = 0x8b; *tlv++ = 0x96; n = 4; - } else { - int hw, ap; - u8 ap_max = rates_eid[1]; - n = 0; - for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { - u8 hw_rate = lbs_rates[hw].bitrate / 5; - for (ap = 0; ap < ap_max; ap++) { - if (hw_rate == (rates_eid[ap+2] & 0x7f)) { - *tlv++ = rates_eid[ap+2]; - n++; - } - } - } } rate_tlv->header.len = cpu_to_le16(n); @@ -465,7 +486,15 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, lbs_deb_enter(LBS_DEB_CFG80211); bsssize = get_unaligned_le16(&scanresp->bssdescriptsize); - nr_sets = le16_to_cpu(resp->size); + nr_sets = le16_to_cpu(scanresp->nr_sets); + + lbs_deb_scan("scan response: %d BSSs (%d bytes); resp size %d bytes\n", + nr_sets, bsssize, le16_to_cpu(resp->size)); + + if (nr_sets == 0) { + ret = 0; + goto done; + } /* * The general layout of the scan response is described in chapter @@ -670,8 +699,13 @@ static void lbs_scan_worker(struct work_struct *work) if (priv->scan_channel >= priv->scan_req->n_channels) { /* Mark scan done */ - cfg80211_scan_done(priv->scan_req, false); + if (priv->internal_scan) + kfree(priv->scan_req); + else + cfg80211_scan_done(priv->scan_req, false); + priv->scan_req = NULL; + priv->last_scan = jiffies; } /* Restart network */ @@ -682,10 +716,33 @@ static void lbs_scan_worker(struct work_struct *work) kfree(scan_cmd); + /* Wake up anything waiting on scan completion */ + if (priv->scan_req == NULL) { + lbs_deb_scan("scan: waking up waiters\n"); + wake_up_all(&priv->scan_q); + } + out_no_scan_cmd: lbs_deb_leave(LBS_DEB_SCAN); } +static void _internal_start_scan(struct lbs_private *priv, bool internal, + struct cfg80211_scan_request *request) +{ + lbs_deb_enter(LBS_DEB_CFG80211); + + lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n", + request->n_ssids, request->n_channels, request->ie_len); + + priv->scan_channel = 0; + queue_delayed_work(priv->work_thread, &priv->scan_work, + msecs_to_jiffies(50)); + + priv->scan_req = request; + priv->internal_scan = internal; + + lbs_deb_leave(LBS_DEB_CFG80211); +} static int lbs_cfg_scan(struct wiphy *wiphy, struct net_device *dev, @@ -702,18 +759,11 @@ static int lbs_cfg_scan(struct wiphy *wiphy, goto out; } - lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n", - request->n_ssids, request->n_channels, request->ie_len); - - priv->scan_channel = 0; - queue_delayed_work(priv->work_thread, &priv->scan_work, - msecs_to_jiffies(50)); + _internal_start_scan(priv, false, request); if (priv->surpriseremoved) ret = -EIO; - priv->scan_req = request; - out: lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); return ret; @@ -1000,6 +1050,7 @@ static int lbs_associate(struct lbs_private *priv, int status; int ret; u8 *pos = &(cmd->iebuf[0]); + u8 *tmp; lbs_deb_enter(LBS_DEB_CFG80211); @@ -1044,7 +1095,9 @@ static int lbs_associate(struct lbs_private *priv, pos += lbs_add_cf_param_tlv(pos); /* add rates TLV */ + tmp = pos + 4; /* skip Marvell IE header */ pos += lbs_add_common_rates_tlv(pos, bss); + lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp); /* add auth type TLV */ if (priv->fwrelease >= 0x09000000) @@ -1124,7 +1177,62 @@ done: return ret; } +static struct cfg80211_scan_request * +_new_connect_scan_req(struct wiphy *wiphy, struct cfg80211_connect_params *sme) +{ + struct cfg80211_scan_request *creq = NULL; + int i, n_channels = 0; + enum ieee80211_band band; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + if (wiphy->bands[band]) + n_channels += wiphy->bands[band]->n_channels; + } + + creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) + + n_channels * sizeof(void *), + GFP_ATOMIC); + if (!creq) + return NULL; + + /* SSIDs come after channels */ + creq->ssids = (void *)&creq->channels[n_channels]; + creq->n_channels = n_channels; + creq->n_ssids = 1; + + /* Scan all available channels */ + i = 0; + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + int j; + + if (!wiphy->bands[band]) + continue; + + for (j = 0; j < wiphy->bands[band]->n_channels; j++) { + /* ignore disabled channels */ + if (wiphy->bands[band]->channels[j].flags & + IEEE80211_CHAN_DISABLED) + continue; + + creq->channels[i] = &wiphy->bands[band]->channels[j]; + i++; + } + } + if (i) { + /* Set real number of channels specified in creq->channels[] */ + creq->n_channels = i; + + /* Scan for the SSID we're going to connect to */ + memcpy(creq->ssids[0].ssid, sme->ssid, sme->ssid_len); + creq->ssids[0].ssid_len = sme->ssid_len; + } else { + /* No channels found... */ + kfree(creq); + creq = NULL; + } + return creq; +} static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_connect_params *sme) @@ -1136,37 +1244,43 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, lbs_deb_enter(LBS_DEB_CFG80211); - if (sme->bssid) { - bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid, - sme->ssid, sme->ssid_len, - WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS); - } else { - /* - * Here we have an impedance mismatch. The firmware command - * CMD_802_11_ASSOCIATE always needs a BSSID, it cannot - * connect otherwise. However, for the connect-API of - * cfg80211 the bssid is purely optional. We don't get one, - * except the user specifies one on the "iw" command line. - * - * If we don't got one, we could initiate a scan and look - * for the best matching cfg80211_bss entry. - * - * Or, better yet, net/wireless/sme.c get's rewritten into - * something more generally useful. + if (!sme->bssid) { + /* Run a scan if one isn't in-progress already and if the last + * scan was done more than 2 seconds ago. */ - lbs_pr_err("TODO: no BSS specified\n"); - ret = -ENOTSUPP; - goto done; - } + if (priv->scan_req == NULL && + time_after(jiffies, priv->last_scan + (2 * HZ))) { + struct cfg80211_scan_request *creq; + creq = _new_connect_scan_req(wiphy, sme); + if (!creq) { + ret = -EINVAL; + goto done; + } + + lbs_deb_assoc("assoc: scanning for compatible AP\n"); + _internal_start_scan(priv, true, creq); + } + + /* Wait for any in-progress scan to complete */ + lbs_deb_assoc("assoc: waiting for scan to complete\n"); + wait_event_interruptible_timeout(priv->scan_q, + (priv->scan_req == NULL), + (15 * HZ)); + lbs_deb_assoc("assoc: scanning competed\n"); + } + /* Find the BSS we want using available scan results */ + bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid, + sme->ssid, sme->ssid_len, + WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS); if (!bss) { - lbs_pr_err("assicate: bss %pM not in scan results\n", + lbs_pr_err("assoc: bss %pM not in scan results\n", sme->bssid); ret = -ENOENT; goto done; } - lbs_deb_assoc("trying %pM", sme->bssid); + lbs_deb_assoc("trying %pM\n", bss->bssid); lbs_deb_assoc("cipher 0x%x, key index %d, key len %d\n", sme->crypto.cipher_group, sme->key_idx, sme->key_len); @@ -1229,7 +1343,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, lbs_set_radio(priv, preamble, 1); /* Do the actual association */ - lbs_associate(priv, bss, sme); + ret = lbs_associate(priv, bss, sme); done: if (bss) diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index 3c7e255..f062ed5 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -161,6 +161,11 @@ struct lbs_private { /** Scanning */ struct delayed_work scan_work; int scan_channel; + /* Queue of things waiting for scan completion */ + wait_queue_head_t scan_q; + /* Whether the scan was initiated internally and not by cfg80211 */ + bool internal_scan; + unsigned long last_scan; }; extern struct cmd_confirm_sleep confirm_sleep; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 2589671..24958a8 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -719,6 +719,7 @@ static int lbs_init_adapter(struct lbs_private *priv) priv->deep_sleep_required = 0; priv->wakeup_dev_required = 0; init_waitqueue_head(&priv->ds_awake_q); + init_waitqueue_head(&priv->scan_q); priv->authtype_auto = 1; priv->is_host_sleep_configured = 0; priv->is_host_sleep_activated = 0; diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 822f8dc..71a101f 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -43,6 +43,8 @@ static DEFINE_PCI_DEVICE_TABLE(p54p_table) = { { PCI_DEVICE(0x1260, 0x3886) }, /* Intersil PRISM Xbow Wireless LAN adapter (Symbol AP-300) */ { PCI_DEVICE(0x1260, 0xffff) }, + /* Standard Microsystems Corp SMC2802W Wireless PCI */ + { PCI_DEVICE(0x10b8, 0x2802) }, { }, }; diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 19b262e..63c2cc4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -240,16 +240,16 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) struct rt2x00_dev *rt2x00dev; int retval; - retval = pci_request_regions(pci_dev, pci_name(pci_dev)); + retval = pci_enable_device(pci_dev); if (retval) { - ERROR_PROBE("PCI request regions failed.\n"); + ERROR_PROBE("Enable device failed.\n"); return retval; } - retval = pci_enable_device(pci_dev); + retval = pci_request_regions(pci_dev, pci_name(pci_dev)); if (retval) { - ERROR_PROBE("Enable device failed.\n"); - goto exit_release_regions; + ERROR_PROBE("PCI request regions failed.\n"); + goto exit_disable_device; } pci_set_master(pci_dev); @@ -260,14 +260,14 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) if (dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32))) { ERROR_PROBE("PCI DMA not supported.\n"); retval = -EIO; - goto exit_disable_device; + goto exit_release_regions; } hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); if (!hw) { ERROR_PROBE("Failed to allocate hardware.\n"); retval = -ENOMEM; - goto exit_disable_device; + goto exit_release_regions; } pci_set_drvdata(pci_dev, hw); @@ -300,13 +300,12 @@ exit_free_reg: exit_free_device: ieee80211_free_hw(hw); -exit_disable_device: - if (retval != -EBUSY) - pci_disable_device(pci_dev); - exit_release_regions: pci_release_regions(pci_dev); +exit_disable_device: + pci_disable_device(pci_dev); + pci_set_drvdata(pci_dev, NULL); return retval; diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c index 1d81785..b50c39a 100644 --- a/drivers/net/wireless/rtl818x/rtl8180_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c @@ -695,6 +695,8 @@ static void rtl8180_beacon_work(struct work_struct *work) /* grab a fresh beacon */ skb = ieee80211_beacon_get(dev, vif); + if (!skb) + goto resched; /* * update beacon timestamp w/ TSF value diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c index 96d25fb..4cb99c5 100644 --- a/drivers/net/wireless/wl12xx/wl1271_spi.c +++ b/drivers/net/wireless/wl12xx/wl1271_spi.c @@ -160,9 +160,8 @@ static void wl1271_spi_init(struct wl1271 *wl) spi_message_add_tail(&t, &m); spi_sync(wl_to_spi(wl), &m); - kfree(cmd); - wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN); + kfree(cmd); } #define WL1271_BUSY_WORD_TIMEOUT 1000 diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 6a5af18..b0de579 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -3030,6 +3030,34 @@ static void __init iommu_exit_mempool(void) } +static void quirk_ioat_snb_local_iommu(struct pci_dev *pdev) +{ + struct dmar_drhd_unit *drhd; + u32 vtbar; + int rc; + + /* We know that this device on this chipset has its own IOMMU. + * If we find it under a different IOMMU, then the BIOS is lying + * to us. Hope that the IOMMU for this device is actually + * disabled, and it needs no translation... + */ + rc = pci_bus_read_config_dword(pdev->bus, PCI_DEVFN(0, 0), 0xb0, &vtbar); + if (rc) { + /* "can't" happen */ + dev_info(&pdev->dev, "failed to run vt-d quirk\n"); + return; + } + vtbar &= 0xffff0000; + + /* we know that the this iommu should be at offset 0xa000 from vtbar */ + drhd = dmar_find_matched_drhd_unit(pdev); + if (WARN_TAINT_ONCE(!drhd || drhd->reg_base_addr - vtbar != 0xa000, + TAINT_FIRMWARE_WORKAROUND, + "BIOS assigned incorrect VT-d unit for Intel(R) QuickData Technology device\n")) + pdev->dev.archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO; +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB, quirk_ioat_snb_local_iommu); + static void __init init_no_remapping_devices(void) { struct dmar_drhd_unit *drhd; diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index bed7b46..8d41f3e 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -1083,6 +1083,49 @@ dasd_eer_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(eer_enabled, 0644, dasd_eer_show, dasd_eer_store); +/* + * expiration time for default requests + */ +static ssize_t +dasd_expires_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct dasd_device *device; + int len; + + device = dasd_device_from_cdev(to_ccwdev(dev)); + if (IS_ERR(device)) + return -ENODEV; + len = snprintf(buf, PAGE_SIZE, "%lu\n", device->default_expires); + dasd_put_device(device); + return len; +} + +static ssize_t +dasd_expires_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct dasd_device *device; + unsigned long val; + + device = dasd_device_from_cdev(to_ccwdev(dev)); + if (IS_ERR(device)) + return -ENODEV; + + if ((strict_strtoul(buf, 10, &val) != 0) || + (val > DASD_EXPIRES_MAX) || val == 0) { + dasd_put_device(device); + return -EINVAL; + } + + if (val) + device->default_expires = val; + + dasd_put_device(device); + return count; +} + +static DEVICE_ATTR(expires, 0644, dasd_expires_show, dasd_expires_store); + static struct attribute * dasd_attrs[] = { &dev_attr_readonly.attr, &dev_attr_discipline.attr, @@ -1094,6 +1137,7 @@ static struct attribute * dasd_attrs[] = { &dev_attr_eer_enabled.attr, &dev_attr_erplog.attr, &dev_attr_failfast.attr, + &dev_attr_expires.attr, NULL, }; diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index 687f323..2b3bc3e 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -43,7 +43,7 @@ MODULE_LICENSE("GPL"); sizeof(struct dasd_diag_req)) / \ sizeof(struct dasd_diag_bio)) / 2) #define DIAG_MAX_RETRIES 32 -#define DIAG_TIMEOUT 50 * HZ +#define DIAG_TIMEOUT 50 static struct dasd_discipline dasd_diag_discipline; @@ -360,6 +360,8 @@ dasd_diag_check_device(struct dasd_device *device) goto out; } + device->default_expires = DIAG_TIMEOUT; + /* Figure out position of label block */ switch (private->rdc_data.vdev_class) { case DEV_CLASS_FBA: @@ -563,7 +565,7 @@ static struct dasd_ccw_req *dasd_diag_build_cp(struct dasd_device *memdev, cqr->startdev = memdev; cqr->memdev = memdev; cqr->block = block; - cqr->expires = DIAG_TIMEOUT; + cqr->expires = memdev->default_expires * HZ; cqr->status = DASD_CQR_FILLED; return cqr; } diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index ab84da5..66360c2 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -82,6 +82,14 @@ static struct ccw_driver dasd_eckd_driver; /* see below */ #define INIT_CQR_UNFORMATTED 1 #define INIT_CQR_ERROR 2 +/* emergency request for reserve/release */ +static struct { + struct dasd_ccw_req cqr; + struct ccw1 ccw; + char data[32]; +} *dasd_reserve_req; +static DEFINE_MUTEX(dasd_reserve_mutex); + /* initial attempt at a probe function. this can be simplified once * the other detection code is gone */ @@ -1107,8 +1115,9 @@ dasd_eckd_check_characteristics(struct dasd_device *device) struct dasd_eckd_private *private; struct dasd_block *block; struct dasd_uid temp_uid; - int is_known, rc; + int is_known, rc, i; int readonly; + unsigned long value; if (!ccw_device_is_pathgroup(device->cdev)) { dev_warn(&device->cdev->dev, @@ -1143,6 +1152,18 @@ dasd_eckd_check_characteristics(struct dasd_device *device) if (rc) goto out_err1; + /* set default timeout */ + device->default_expires = DASD_EXPIRES; + if (private->gneq) { + value = 1; + for (i = 0; i < private->gneq->timeout.value; i++) + value = 10 * value; + value = value * private->gneq->timeout.number; + /* do not accept useless values */ + if (value != 0 && value <= DASD_EXPIRES_MAX) + device->default_expires = value; + } + /* Generate device unique id */ rc = dasd_eckd_generate_uid(device); if (rc) @@ -1973,7 +1994,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_single( cqr->startdev = startdev; cqr->memdev = startdev; cqr->block = block; - cqr->expires = 5 * 60 * HZ; /* 5 minutes */ + cqr->expires = startdev->default_expires * HZ; /* default 5 minutes */ cqr->lpm = private->path_data.ppm; cqr->retries = 256; cqr->buildclk = get_clock(); @@ -2150,7 +2171,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_track( cqr->startdev = startdev; cqr->memdev = startdev; cqr->block = block; - cqr->expires = 5 * 60 * HZ; /* 5 minutes */ + cqr->expires = startdev->default_expires * HZ; /* default 5 minutes */ cqr->lpm = private->path_data.ppm; cqr->retries = 256; cqr->buildclk = get_clock(); @@ -2398,7 +2419,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track( cqr->startdev = startdev; cqr->memdev = startdev; cqr->block = block; - cqr->expires = 5 * 60 * HZ; /* 5 minutes */ + cqr->expires = startdev->default_expires * HZ; /* default 5 minutes */ cqr->lpm = private->path_data.ppm; cqr->retries = 256; cqr->buildclk = get_clock(); @@ -2645,15 +2666,23 @@ dasd_eckd_release(struct dasd_device *device) struct dasd_ccw_req *cqr; int rc; struct ccw1 *ccw; + int useglobal; if (!capable(CAP_SYS_ADMIN)) return -EACCES; + useglobal = 0; cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device); if (IS_ERR(cqr)) { - DBF_DEV_EVENT(DBF_WARNING, device, "%s", - "Could not allocate initialization request"); - return PTR_ERR(cqr); + mutex_lock(&dasd_reserve_mutex); + useglobal = 1; + cqr = &dasd_reserve_req->cqr; + memset(cqr, 0, sizeof(*cqr)); + memset(&dasd_reserve_req->ccw, 0, + sizeof(dasd_reserve_req->ccw)); + cqr->cpaddr = &dasd_reserve_req->ccw; + cqr->data = &dasd_reserve_req->data; + cqr->magic = DASD_ECKD_MAGIC; } ccw = cqr->cpaddr; ccw->cmd_code = DASD_ECKD_CCW_RELEASE; @@ -2671,7 +2700,10 @@ dasd_eckd_release(struct dasd_device *device) rc = dasd_sleep_on_immediatly(cqr); - dasd_sfree_request(cqr, cqr->memdev); + if (useglobal) + mutex_unlock(&dasd_reserve_mutex); + else + dasd_sfree_request(cqr, cqr->memdev); return rc; } @@ -2687,15 +2719,23 @@ dasd_eckd_reserve(struct dasd_device *device) struct dasd_ccw_req *cqr; int rc; struct ccw1 *ccw; + int useglobal; if (!capable(CAP_SYS_ADMIN)) return -EACCES; + useglobal = 0; cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device); if (IS_ERR(cqr)) { - DBF_DEV_EVENT(DBF_WARNING, device, "%s", - "Could not allocate initialization request"); - return PTR_ERR(cqr); + mutex_lock(&dasd_reserve_mutex); + useglobal = 1; + cqr = &dasd_reserve_req->cqr; + memset(cqr, 0, sizeof(*cqr)); + memset(&dasd_reserve_req->ccw, 0, + sizeof(dasd_reserve_req->ccw)); + cqr->cpaddr = &dasd_reserve_req->ccw; + cqr->data = &dasd_reserve_req->data; + cqr->magic = DASD_ECKD_MAGIC; } ccw = cqr->cpaddr; ccw->cmd_code = DASD_ECKD_CCW_RESERVE; @@ -2713,7 +2753,10 @@ dasd_eckd_reserve(struct dasd_device *device) rc = dasd_sleep_on_immediatly(cqr); - dasd_sfree_request(cqr, cqr->memdev); + if (useglobal) + mutex_unlock(&dasd_reserve_mutex); + else + dasd_sfree_request(cqr, cqr->memdev); return rc; } @@ -2728,15 +2771,23 @@ dasd_eckd_steal_lock(struct dasd_device *device) struct dasd_ccw_req *cqr; int rc; struct ccw1 *ccw; + int useglobal; if (!capable(CAP_SYS_ADMIN)) return -EACCES; + useglobal = 0; cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device); if (IS_ERR(cqr)) { - DBF_DEV_EVENT(DBF_WARNING, device, "%s", - "Could not allocate initialization request"); - return PTR_ERR(cqr); + mutex_lock(&dasd_reserve_mutex); + useglobal = 1; + cqr = &dasd_reserve_req->cqr; + memset(cqr, 0, sizeof(*cqr)); + memset(&dasd_reserve_req->ccw, 0, + sizeof(dasd_reserve_req->ccw)); + cqr->cpaddr = &dasd_reserve_req->ccw; + cqr->data = &dasd_reserve_req->data; + cqr->magic = DASD_ECKD_MAGIC; } ccw = cqr->cpaddr; ccw->cmd_code = DASD_ECKD_CCW_SLCK; @@ -2754,7 +2805,10 @@ dasd_eckd_steal_lock(struct dasd_device *device) rc = dasd_sleep_on_immediatly(cqr); - dasd_sfree_request(cqr, cqr->memdev); + if (useglobal) + mutex_unlock(&dasd_reserve_mutex); + else + dasd_sfree_request(cqr, cqr->memdev); return rc; } @@ -3488,10 +3542,15 @@ dasd_eckd_init(void) int ret; ASCEBC(dasd_eckd_discipline.ebcname, 4); + dasd_reserve_req = kmalloc(sizeof(*dasd_reserve_req), + GFP_KERNEL | GFP_DMA); + if (!dasd_reserve_req) + return -ENOMEM; ret = ccw_driver_register(&dasd_eckd_driver); if (!ret) wait_for_device_probe(); - + else + kfree(dasd_reserve_req); return ret; } @@ -3499,6 +3558,7 @@ static void __exit dasd_eckd_cleanup(void) { ccw_driver_unregister(&dasd_eckd_driver); + kfree(dasd_reserve_req); } module_init(dasd_eckd_init); diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h index dd6385a..0eb4965 100644 --- a/drivers/s390/block/dasd_eckd.h +++ b/drivers/s390/block/dasd_eckd.h @@ -320,7 +320,12 @@ struct dasd_gneq { __u8 identifier:2; __u8 reserved:6; } __attribute__ ((packed)) flags; - __u8 reserved[7]; + __u8 reserved[5]; + struct { + __u8 value:2; + __u8 number:6; + } __attribute__ ((packed)) timeout; + __u8 reserved3; __u16 subsystemID; __u8 reserved2[22]; } __attribute__ ((packed)); diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c index dd88803..7158f95 100644 --- a/drivers/s390/block/dasd_eer.c +++ b/drivers/s390/block/dasd_eer.c @@ -701,7 +701,7 @@ int __init dasd_eer_init(void) void dasd_eer_exit(void) { if (dasd_eer_dev) { - WARN_ON(misc_deregister(dasd_eer_dev) != 0); + misc_deregister(dasd_eer_dev); kfree(dasd_eer_dev); dasd_eer_dev = NULL; } diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c index 37282b9..bec5486e 100644 --- a/drivers/s390/block/dasd_fba.c +++ b/drivers/s390/block/dasd_fba.c @@ -163,6 +163,8 @@ dasd_fba_check_characteristics(struct dasd_device *device) return rc; } + device->default_expires = DASD_EXPIRES; + readonly = dasd_device_is_ro(device); if (readonly) set_bit(DASD_FLAG_DEVICE_RO, &device->flags); @@ -370,7 +372,7 @@ static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev, cqr->startdev = memdev; cqr->memdev = memdev; cqr->block = block; - cqr->expires = 5 * 60 * HZ; /* 5 minutes */ + cqr->expires = memdev->default_expires * HZ; /* default 5 minutes */ cqr->retries = 32; cqr->buildclk = get_clock(); cqr->status = DASD_CQR_FILLED; diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index 49b431d..500678d 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -186,7 +186,7 @@ struct dasd_ccw_req { /* ... and how */ unsigned long starttime; /* jiffies time of request start */ - int expires; /* expiration period in jiffies */ + unsigned long expires; /* expiration period in jiffies */ char lpm; /* logical path mask */ void *data; /* pointer to data area */ @@ -224,6 +224,9 @@ struct dasd_ccw_req { #define DASD_CQR_CLEARED 0x84 /* request was cleared */ #define DASD_CQR_SUCCESS 0x85 /* request was successful */ +/* default expiration time*/ +#define DASD_EXPIRES 300 +#define DASD_EXPIRES_MAX 40000000 /* per dasd_ccw_req flags */ #define DASD_CQR_FLAGS_USE_ERP 0 /* use ERP for this request */ @@ -404,6 +407,9 @@ struct dasd_device { /* hook for alias management */ struct list_head alias_list; + + /* default expiration time in s */ + unsigned long default_expires; }; struct dasd_block { diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c index 2ed3f82..e021ec6 100644 --- a/drivers/s390/char/monreader.c +++ b/drivers/s390/char/monreader.c @@ -627,7 +627,7 @@ out_iucv: static void __exit mon_exit(void) { segment_unload(mon_dcss_name); - WARN_ON(misc_deregister(&mon_dev) != 0); + misc_deregister(&mon_dev); device_unregister(monreader_device); driver_unregister(&monreader_driver); iucv_unregister(&monreader_iucv_handler, 1); diff --git a/drivers/s390/char/monwriter.c b/drivers/s390/char/monwriter.c index 98a49df..572a1e7 100644 --- a/drivers/s390/char/monwriter.c +++ b/drivers/s390/char/monwriter.c @@ -380,7 +380,7 @@ out_driver: static void __exit mon_exit(void) { - WARN_ON(misc_deregister(&mon_dev) != 0); + misc_deregister(&mon_dev); platform_device_unregister(monwriter_pdev); platform_driver_unregister(&monwriter_pdrv); } diff --git a/drivers/s390/cio/ccwreq.c b/drivers/s390/cio/ccwreq.c index 7f206ed..d15f8b4 100644 --- a/drivers/s390/cio/ccwreq.c +++ b/drivers/s390/cio/ccwreq.c @@ -38,9 +38,13 @@ static u16 ccwreq_next_path(struct ccw_device *cdev) { struct ccw_request *req = &cdev->private->req; + if (!req->singlepath) { + req->mask = 0; + goto out; + } req->retries = req->maxretries; req->mask = lpm_adjust(req->mask >>= 1, req->lpm); - +out: return req->mask; } @@ -113,8 +117,12 @@ void ccw_request_start(struct ccw_device *cdev) { struct ccw_request *req = &cdev->private->req; - /* Try all paths twice to counter link flapping. */ - req->mask = 0x8080; + if (req->singlepath) { + /* Try all paths twice to counter link flapping. */ + req->mask = 0x8080; + } else + req->mask = req->lpm; + req->retries = req->maxretries; req->mask = lpm_adjust(req->mask, req->lpm); req->drc = 0; @@ -182,6 +190,8 @@ static enum io_status ccwreq_status(struct ccw_device *cdev, struct irb *lcirb) /* Ask the driver what to do */ if (cdev->drv && cdev->drv->uc_handler) { todo = cdev->drv->uc_handler(cdev, lcirb); + CIO_TRACE_EVENT(2, "uc_response"); + CIO_HEX_EVENT(2, &todo, sizeof(todo)); switch (todo) { case UC_TODO_RETRY: return IO_STATUS_ERROR; diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 407d0e9..4cbb1a6 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -29,6 +29,7 @@ #include "chsc.h" static void *sei_page; +static DEFINE_SPINLOCK(siosl_lock); static DEFINE_SPINLOCK(sda_lock); /** @@ -48,6 +49,7 @@ int chsc_error_from_response(int response) case 0x0007: case 0x0008: case 0x000a: + case 0x0104: return -EINVAL; case 0x0004: return -EOPNOTSUPP; @@ -974,3 +976,49 @@ int chsc_sstpi(void *page, void *result, size_t size) return (rr->response.code == 0x0001) ? 0 : -EIO; } +static struct { + struct chsc_header request; + u32 word1; + struct subchannel_id sid; + u32 word3; + struct chsc_header response; + u32 word[11]; +} __attribute__ ((packed)) siosl_area __attribute__ ((__aligned__(PAGE_SIZE))); + +int chsc_siosl(struct subchannel_id schid) +{ + unsigned long flags; + int ccode; + int rc; + + spin_lock_irqsave(&siosl_lock, flags); + memset(&siosl_area, 0, sizeof(siosl_area)); + siosl_area.request.length = 0x0010; + siosl_area.request.code = 0x0046; + siosl_area.word1 = 0x80000000; + siosl_area.sid = schid; + + ccode = chsc(&siosl_area); + if (ccode > 0) { + if (ccode == 3) + rc = -ENODEV; + else + rc = -EBUSY; + CIO_MSG_EVENT(2, "chsc: chsc failed for 0.%x.%04x (ccode=%d)\n", + schid.ssid, schid.sch_no, ccode); + goto out; + } + rc = chsc_error_from_response(siosl_area.response.code); + if (rc) + CIO_MSG_EVENT(2, "chsc: siosl failed for 0.%x.%04x (rc=%04x)\n", + schid.ssid, schid.sch_no, + siosl_area.response.code); + else + CIO_MSG_EVENT(4, "chsc: siosl succeeded for 0.%x.%04x\n", + schid.ssid, schid.sch_no); +out: + spin_unlock_irqrestore(&siosl_lock, flags); + + return rc; +} +EXPORT_SYMBOL_GPL(chsc_siosl); diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h index 37aa611..5453013 100644 --- a/drivers/s390/cio/chsc.h +++ b/drivers/s390/cio/chsc.h @@ -80,4 +80,6 @@ int chsc_get_channel_measurement_chars(struct channel_path *chp); int chsc_error_from_response(int response); +int chsc_siosl(struct subchannel_id schid); + #endif diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 6d229f3..51bd368 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -36,6 +36,7 @@ #include "ioasm.h" #include "io_sch.h" #include "blacklist.h" +#include "chsc.h" static struct timer_list recovery_timer; static DEFINE_SPINLOCK(recovery_lock); @@ -486,9 +487,11 @@ static int online_store_handle_offline(struct ccw_device *cdev) spin_lock_irq(cdev->ccwlock); ccw_device_sched_todo(cdev, CDEV_TODO_UNREG_EVAL); spin_unlock_irq(cdev->ccwlock); - } else if (cdev->online && cdev->drv && cdev->drv->set_offline) + return 0; + } + if (cdev->drv && cdev->drv->set_offline) return ccw_device_set_offline(cdev); - return 0; + return -EINVAL; } static int online_store_recog_and_online(struct ccw_device *cdev) @@ -505,8 +508,8 @@ static int online_store_recog_and_online(struct ccw_device *cdev) return -EAGAIN; } if (cdev->drv && cdev->drv->set_online) - ccw_device_set_online(cdev); - return 0; + return ccw_device_set_online(cdev); + return -EINVAL; } static int online_store_handle_online(struct ccw_device *cdev, int force) @@ -598,6 +601,25 @@ available_show (struct device *dev, struct device_attribute *attr, char *buf) } } +static ssize_t +initiate_logging(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct subchannel *sch = to_subchannel(dev); + int rc; + + rc = chsc_siosl(sch->schid); + if (rc < 0) { + pr_warning("Logging for subchannel 0.%x.%04x failed with " + "errno=%d\n", + sch->schid.ssid, sch->schid.sch_no, rc); + return rc; + } + pr_notice("Logging for subchannel 0.%x.%04x was triggered\n", + sch->schid.ssid, sch->schid.sch_no); + return count; +} + static DEVICE_ATTR(chpids, 0444, chpids_show, NULL); static DEVICE_ATTR(pimpampom, 0444, pimpampom_show, NULL); static DEVICE_ATTR(devtype, 0444, devtype_show, NULL); @@ -605,10 +627,12 @@ static DEVICE_ATTR(cutype, 0444, cutype_show, NULL); static DEVICE_ATTR(modalias, 0444, modalias_show, NULL); static DEVICE_ATTR(online, 0644, online_show, online_store); static DEVICE_ATTR(availability, 0444, available_show, NULL); +static DEVICE_ATTR(logging, 0200, NULL, initiate_logging); static struct attribute *io_subchannel_attrs[] = { &dev_attr_chpids.attr, &dev_attr_pimpampom.attr, + &dev_attr_logging.attr, NULL, }; @@ -2036,6 +2060,21 @@ void ccw_device_sched_todo(struct ccw_device *cdev, enum cdev_todo todo) } } +/** + * ccw_device_siosl() - initiate logging + * @cdev: ccw device + * + * This function is used to invoke model-dependent logging within the channel + * subsystem. + */ +int ccw_device_siosl(struct ccw_device *cdev) +{ + struct subchannel *sch = to_subchannel(cdev->dev.parent); + + return chsc_siosl(sch->schid); +} +EXPORT_SYMBOL_GPL(ccw_device_siosl); + MODULE_LICENSE("GPL"); EXPORT_SYMBOL(ccw_device_set_online); EXPORT_SYMBOL(ccw_device_set_offline); diff --git a/drivers/s390/cio/device_pgid.c b/drivers/s390/cio/device_pgid.c index 6facb54..82a5ad0 100644 --- a/drivers/s390/cio/device_pgid.c +++ b/drivers/s390/cio/device_pgid.c @@ -208,6 +208,7 @@ static void spid_start(struct ccw_device *cdev) req->timeout = PGID_TIMEOUT; req->maxretries = PGID_RETRIES; req->lpm = 0x80; + req->singlepath = 1; req->callback = spid_callback; spid_do(cdev); } @@ -420,6 +421,7 @@ static void verify_start(struct ccw_device *cdev) req->timeout = PGID_TIMEOUT; req->maxretries = PGID_RETRIES; req->lpm = 0x80; + req->singlepath = 1; if (cdev->private->flags.pgroup) { CIO_TRACE_EVENT(4, "snid"); CIO_HEX_EVENT(4, devid, sizeof(*devid)); @@ -507,6 +509,7 @@ void ccw_device_disband_start(struct ccw_device *cdev) req->timeout = PGID_TIMEOUT; req->maxretries = PGID_RETRIES; req->lpm = sch->schib.pmcw.pam & sch->opm; + req->singlepath = 1; req->callback = disband_callback; fn = SPID_FUNC_DISBAND; if (cdev->private->flags.mpath) diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h index b9ce712..469ef93 100644 --- a/drivers/s390/cio/io_sch.h +++ b/drivers/s390/cio/io_sch.h @@ -92,11 +92,12 @@ enum io_status { * @filter: optional callback to adjust request status based on IRB data * @callback: final callback * @data: user-defined pointer passed to all callbacks + * @singlepath: if set, use only one path from @lpm per start I/O + * @cancel: non-zero if request was cancelled + * @done: non-zero if request was finished * @mask: current path mask * @retries: current number of retries * @drc: delayed return code - * @cancel: non-zero if request was cancelled - * @done: non-zero if request was finished */ struct ccw_request { struct ccw1 *cp; @@ -108,12 +109,13 @@ struct ccw_request { enum io_status); void (*callback)(struct ccw_device *, void *, int); void *data; + unsigned int singlepath:1; /* These fields are used internally. */ + unsigned int cancel:1; + unsigned int done:1; u16 mask; u16 retries; int drc; - int cancel:1; - int done:1; } __attribute__((packed)); /* diff --git a/drivers/s390/net/smsgiucv_app.c b/drivers/s390/net/smsgiucv_app.c index 1376887..4d2ea40 100644 --- a/drivers/s390/net/smsgiucv_app.c +++ b/drivers/s390/net/smsgiucv_app.c @@ -180,6 +180,13 @@ static int __init smsgiucv_app_init(void) goto fail_put_driver; } + /* convert sender to uppercase characters */ + if (sender) { + int len = strlen(sender); + while (len--) + sender[len] = toupper(sender[len]); + } + /* register with the smsgiucv device driver */ rc = smsg_register_callback(SMSG_PREFIX, smsg_app_callback); if (rc) { diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 8681f13..d89aa38 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -216,7 +216,7 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { unsigned long flags; - unsigned int baud, quot, h_lcr; + unsigned int baud, quot, h_lcr, b; /* * We don't support modem control lines. @@ -234,12 +234,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios, */ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); quot = uart_get_divisor(port, baud); - - if (port->state && port->state->port.tty) { - struct tty_struct *tty = port->state->port.tty; - unsigned int b = port->uartclk / (16 * quot); - tty_encode_baud_rate(tty, b, b); - } + b = port->uartclk / (16 * quot); + tty_termios_encode_baud_rate(termios, b, b); switch (termios->c_cflag & CSIZE) { case CS5: diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index 3046386..7356a56 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -78,10 +78,6 @@ struct m68k_serial *m68k_consinfo = 0; #define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */ -#ifdef CONFIG_CONSOLE -extern wait_queue_head_t keypress_wait; -#endif - struct tty_driver *serial_driver; /* number of characters left in xmit buffer before we ask for more */ @@ -102,19 +98,13 @@ static void change_speed(struct m68k_serial *info); * Setup for console. Argument comes from the boot command line. */ -#if defined(CONFIG_M68EZ328ADS) || defined(CONFIG_ALMA_ANS) || defined(CONFIG_DRAGONIXVZ) -#define CONSOLE_BAUD_RATE 115200 -#define DEFAULT_CBAUD B115200 -#else - /* (es) */ - /* note: this is messy, but it works, again, perhaps defined somewhere else?*/ - #ifdef CONFIG_M68VZ328 - #define CONSOLE_BAUD_RATE 19200 - #define DEFAULT_CBAUD B19200 - #endif - /* (/es) */ +/* note: this is messy, but it works, again, perhaps defined somewhere else?*/ +#ifdef CONFIG_M68VZ328 +#define CONSOLE_BAUD_RATE 19200 +#define DEFAULT_CBAUD B19200 #endif + #ifndef CONSOLE_BAUD_RATE #define CONSOLE_BAUD_RATE 9600 #define DEFAULT_CBAUD B9600 @@ -300,10 +290,6 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx) return; #endif /* CONFIG_MAGIC_SYSRQ */ } - /* It is a 'keyboard interrupt' ;-) */ -#ifdef CONFIG_CONSOLE - wake_up(&keypress_wait); -#endif } if(!tty) @@ -1243,7 +1229,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, retval = -ERESTARTSYS; break; } + tty_unlock(); schedule(); + tty_lock(); } current->state = TASK_RUNNING; remove_wait_queue(&info->open_wait, &wait); diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c index 768612f..0dff3bb 100644 --- a/drivers/serial/68360serial.c +++ b/drivers/serial/68360serial.c @@ -1705,7 +1705,6 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) printk("jiff=%lu...", jiffies); #endif - lock_kernel(); /* We go through the loop at least once because we can't tell * exactly when the last character exits the shifter. There can * be at least two characters waiting to be sent after the buffers @@ -1734,7 +1733,6 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) bdp--; } while (bdp->status & BD_SC_READY); current->state = TASK_RUNNING; - unlock_kernel(); #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); #endif @@ -1862,7 +1860,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, printk("block_til_ready blocking: ttys%d, count = %d\n", info->line, state->count); #endif + tty_unlock(); schedule(); + tty_lock(); } current->state = TASK_RUNNING; remove_wait_queue(&info->open_wait, &wait); diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 09ef570..24110f6 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -241,7 +241,7 @@ static const struct serial8250_config uart_config[] = { .fifo_size = 128, .tx_loadsz = 128, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, }, [PORT_16654] = { .name = "ST16654", @@ -300,6 +300,13 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, .flags = UART_CAP_FIFO | UART_CAP_AFE, }, + [PORT_U6_16550A] = { + .name = "U6_16550A", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, }; #if defined(CONFIG_MIPS_ALCHEMY) @@ -1070,6 +1077,15 @@ static void autoconfig_16550a(struct uart_8250_port *up) DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); } serial_outp(up, UART_IER, iersave); + + /* + * We distinguish between 16550A and U6 16550A by counting + * how many bytes are in the FIFO. + */ + if (up->port.type == PORT_16550A && size_fifo(up) == 64) { + up->port.type = PORT_U6_16550A; + up->capabilities |= UART_CAP_AFE; + } } /* @@ -2224,9 +2240,9 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int return quot; } -static void -serial8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) +void +serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_8250_port *up = (struct uart_8250_port *)port; unsigned char cval, fcr = 0; @@ -2402,16 +2418,22 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios, if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); } +EXPORT_SYMBOL(serial8250_do_set_termios); static void -serial8250_set_ldisc(struct uart_port *port) +serial8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { - int line = port->line; - - if (line >= port->state->port.tty->driver->num) - return; + if (port->set_termios) + port->set_termios(port, termios, old); + else + serial8250_do_set_termios(port, termios, old); +} - if (port->state->port.tty->ldisc->ops->num == N_PPS) { +static void +serial8250_set_ldisc(struct uart_port *port, int new) +{ + if (new == N_PPS) { port->flags |= UPF_HARDPPS_CD; serial8250_enable_ms(port); } else @@ -2987,6 +3009,7 @@ static int __devinit serial8250_probe(struct platform_device *dev) port.type = p->type; port.serial_in = p->serial_in; port.serial_out = p->serial_out; + port.set_termios = p->set_termios; port.dev = &dev->dev; port.irqflags |= irqflag; ret = serial8250_register_port(&port); @@ -3150,6 +3173,9 @@ int serial8250_register_port(struct uart_port *port) uart->port.serial_in = port->serial_in; if (port->serial_out) uart->port.serial_out = port->serial_out; + /* Possibly override set_termios call */ + if (port->set_termios) + uart->port.set_termios = port->set_termios; ret = uart_add_one_port(&serial8250_reg, &uart->port); if (ret == 0) diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c index f279745..b745792 100644 --- a/drivers/serial/8250_early.c +++ b/drivers/serial/8250_early.c @@ -19,9 +19,11 @@ * The user can specify the device directly, e.g., * earlycon=uart8250,io,0x3f8,9600n8 * earlycon=uart8250,mmio,0xff5e0000,115200n8 + * earlycon=uart8250,mmio32,0xff5e0000,115200n8 * or * console=uart8250,io,0x3f8,9600n8 * console=uart8250,mmio,0xff5e0000,115200n8 + * console=uart8250,mmio32,0xff5e0000,115200n8 */ #include <linux/tty.h> @@ -48,18 +50,31 @@ static struct early_serial8250_device early_device; static unsigned int __init serial_in(struct uart_port *port, int offset) { - if (port->iotype == UPIO_MEM) + switch (port->iotype) { + case UPIO_MEM: return readb(port->membase + offset); - else + case UPIO_MEM32: + return readl(port->membase + (offset << 2)); + case UPIO_PORT: return inb(port->iobase + offset); + default: + return 0; + } } static void __init serial_out(struct uart_port *port, int offset, int value) { - if (port->iotype == UPIO_MEM) + switch (port->iotype) { + case UPIO_MEM: writeb(value, port->membase + offset); - else + break; + case UPIO_MEM32: + writel(value, port->membase + (offset << 2)); + break; + case UPIO_PORT: outb(value, port->iobase + offset); + break; + } } #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) @@ -137,15 +152,21 @@ static int __init parse_options(struct early_serial8250_device *device, char *options) { struct uart_port *port = &device->port; - int mmio, length; + int mmio, mmio32, length; if (!options) return -ENODEV; port->uartclk = BASE_BAUD * 16; - if (!strncmp(options, "mmio,", 5)) { - port->iotype = UPIO_MEM; - port->mapbase = simple_strtoul(options + 5, &options, 0); + + mmio = !strncmp(options, "mmio,", 5); + mmio32 = !strncmp(options, "mmio32,", 7); + if (mmio || mmio32) { + port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); + port->mapbase = simple_strtoul(options + (mmio ? 5 : 7), + &options, 0); + if (mmio32) + port->regshift = 2; #ifdef CONFIG_FIX_EARLYCON_MEM set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, port->mapbase & PAGE_MASK); @@ -157,11 +178,10 @@ static int __init parse_options(struct early_serial8250_device *device, if (!port->membase) { printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", __func__, - (unsigned long long)port->mapbase); + (unsigned long long) port->mapbase); return -ENOMEM; } #endif - mmio = 1; } else if (!strncmp(options, "io,", 3)) { port->iotype = UPIO_PORT; port->iobase = simple_strtoul(options + 3, &options, 0); @@ -181,11 +201,18 @@ static int __init parse_options(struct early_serial8250_device *device, device->baud); } - printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n", - mmio ? "MMIO" : "I/O port", - mmio ? (unsigned long long) port->mapbase - : (unsigned long long) port->iobase, - device->options); + if (mmio || mmio32) + printk(KERN_INFO + "Early serial console at MMIO%s 0x%llu (options '%s')\n", + mmio32 ? "32" : "", + (unsigned long long)port->mapbase, + device->options); + else + printk(KERN_INFO + "Early serial console at I/O port 0x%lu (options '%s')\n", + port->iobase, + device->options); + return 0; } diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 746a446..53be4d3 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -994,6 +994,7 @@ static int skip_tx_en_setup(struct serial_private *priv, #define PCI_DEVICE_ID_TITAN_800E 0xA014 #define PCI_DEVICE_ID_TITAN_200EI 0xA016 #define PCI_DEVICE_ID_TITAN_200EISI 0xA017 +#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1542,6 +1543,8 @@ enum pci_board_num_t { pbn_b2_4_921600, pbn_b2_8_921600, + pbn_b2_8_1152000, + pbn_b2_bt_1_115200, pbn_b2_bt_2_115200, pbn_b2_bt_4_115200, @@ -1960,6 +1963,13 @@ static struct pciserial_board pci_boards[] __devinitdata = { .uart_offset = 8, }, + [pbn_b2_8_1152000] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 1152000, + .uart_offset = 8, + }, + [pbn_b2_bt_1_115200] = { .flags = FL_BASE2|FL_BASE_BARS, .num_ports = 1, @@ -2875,6 +2885,9 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, + PCI_ANY_ID , PCI_ANY_ID, 0, 0, + pbn_b2_8_1152000 }, /* * Oxford Semiconductor Inc. Tornado PCI express device range. diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index e437ce8..a22e60c 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -542,6 +542,7 @@ config SERIAL_S5PV210 help Serial port support for Samsung's S5P Family of SoC's + config SERIAL_MAX3100 tristate "MAX3100 support" depends on SPI @@ -549,6 +550,22 @@ config SERIAL_MAX3100 help MAX3100 chip support +config SERIAL_MAX3107 + tristate "MAX3107 support" + depends on SPI + select SERIAL_CORE + help + MAX3107 chip support + +config SERIAL_MAX3107_AAVA + tristate "MAX3107 AAVA platform support" + depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB + select SERIAL_CORE + help + Support for the MAX3107 chip configuration found on the AAVA + platform. Includes the extra initialisation and GPIO support + neded for this device. + config SERIAL_DZ bool "DECstation DZ serial driver" depends on MACH_DECSTATION && 32BIT @@ -690,6 +707,33 @@ config SERIAL_SA1100_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) +config SERIAL_MRST_MAX3110 + tristate "SPI UART driver for Max3110" + depends on SPI_DW_PCI + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + help + This is the UART protocol driver for the MAX3110 device on + the Intel Moorestown platform. On other systems use the max3100 + driver. + +config MRST_MAX3110_IRQ + boolean "Enable GPIO IRQ for Max3110 over Moorestown" + default n + depends on SERIAL_MRST_MAX3110 && GPIO_LANGWELL + help + This has to be enabled after Moorestown GPIO driver is loaded + +config SERIAL_MFD_HSU + tristate "Medfield High Speed UART support" + depends on PCI + select SERIAL_CORE + +config SERIAL_MFD_HSU_CONSOLE + boolean "Medfile HSU serial console support" + depends on SERIAL_MFD_HSU=y + select SERIAL_CORE_CONSOLE + config SERIAL_BFIN tristate "Blackfin serial port support" depends on BLACKFIN diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 208a855..1ca4fd5 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -46,6 +46,8 @@ obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o +obj-$(CONFIG_SERIAL_MAX3107) += max3107.o +obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o @@ -84,3 +86,5 @@ obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o +obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o +obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c index 0f11896..f8d8a00 100644 --- a/drivers/serial/altera_uart.c +++ b/drivers/serial/altera_uart.c @@ -394,7 +394,7 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp) static void altera_uart_console_putc(struct uart_port *port, const char c) { while (!(readl(port->membase + ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_TRDY_MSK)) + ALTERA_UART_STATUS_TRDY_MSK)) cpu_relax(); writel(c, port->membase + ALTERA_UART_TXDATA_REG); diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index a182def..3892666 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -217,7 +217,8 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - UART_PUT_TTGR(port, rs485conf->delay_rts_before_send); + if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); @@ -292,7 +293,9 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send); + if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, + atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); @@ -1211,7 +1214,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send); + if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, + atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 511cbf6..a9eff2b 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -957,15 +957,12 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) * Enable the IrDA function if tty->ldisc.num is N_IRDA. * In other cases, disable IrDA function. */ -static void bfin_serial_set_ldisc(struct uart_port *port) +static void bfin_serial_set_ldisc(struct uart_port *port, int ld) { int line = port->line; unsigned short val; - if (line >= port->state->port.tty->driver->num) - return; - - switch (port->state->port.tty->termios->c_line) { + switch (ld) { case N_IRDA: val = UART_GET_GCTL(&bfin_serial_ports[line]); val |= (IREN | RPOLC); diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 31f1723..c856905 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -3724,6 +3724,17 @@ rs_ioctl(struct tty_struct *tty, struct file * file, return e100_enable_rs485(tty, &rs485data); } + case TIOCGRS485: + { + struct serial_rs485 *rs485data = + &(((struct e100_serial *)tty->driver_data)->rs485); + /* This is the ioctl to get RS485 data from user-space */ + if (copy_to_user((struct serial_rs485 *) arg, + rs485data, + sizeof(serial_rs485))) + return -EFAULT; + break; + } case TIOCSERWRRS485: { @@ -3924,7 +3935,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k) */ - lock_kernel(); orig_jiffies = jiffies; while (info->xmit.head != info->xmit.tail || /* More in send queue */ (*info->ostatusadr & 0x007f) || /* more in FIFO */ @@ -3941,7 +3951,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) curr_time_usec - info->last_tx_active_usec; } set_current_state(TASK_RUNNING); - unlock_kernel(); } /* @@ -3981,7 +3990,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp, */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible(info->close_wait, + wait_event_interruptible_tty(info->close_wait, !(info->flags & ASYNC_CLOSING)); #ifdef SERIAL_DO_RESTART if (info->flags & ASYNC_HUP_NOTIFY) @@ -4057,7 +4066,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp, printk("block_til_ready blocking: ttyS%d, count = %d\n", info->line, info->count); #endif + tty_unlock(); schedule(); + tty_lock(); } set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); @@ -4139,7 +4150,7 @@ rs_open(struct tty_struct *tty, struct file * filp) */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible(info->close_wait, + wait_event_interruptible_tty(info->close_wait, !(info->flags & ASYNC_CLOSING)); #ifdef SERIAL_DO_RESTART return ((info->flags & ASYNC_HUP_NOTIFY) ? @@ -4522,8 +4533,8 @@ static int __init rs_init(void) INIT_WORK(&info->work, do_softint); if (info->enabled) { - printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n", - serial_driver->name, info->line, (unsigned int)info->ioport); + printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n", + serial_driver->name, info->line, info->ioport); } } #ifdef CONFIG_ETRAX_FAST_TIMER diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index eacb588..66ecc7a 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -909,13 +909,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, rational_best_approximation(16 * div * baud, sport->port.uartclk, 1 << 16, 1 << 16, &num, &denom); - if (port->state && port->state->port.tty) { - tdiv64 = sport->port.uartclk; - tdiv64 *= num; - do_div(tdiv64, denom * 16 * div); - tty_encode_baud_rate(sport->port.state->port.tty, + tdiv64 = sport->port.uartclk; + tdiv64 *= num; + do_div(tdiv64, denom * 16 * div); + tty_termios_encode_baud_rate(termios, (speed_t)tdiv64, (speed_t)tdiv64); - } num -= 1; denom -= 1; diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index f164ba4..93de907 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -954,12 +954,13 @@ ioc3_change_speed(struct uart_port *the_port, struct ktermios *new_termios, struct ktermios *old_termios) { struct ioc3_port *port = get_ioc3_port(the_port); - unsigned int cflag; + unsigned int cflag, iflag; int baud; int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; struct uart_state *state = the_port->state; cflag = new_termios->c_cflag; + iflag = new_termios->c_iflag; switch (cflag & CSIZE) { case CS5: @@ -1000,12 +1001,12 @@ ioc3_change_speed(struct uart_port *the_port, state->port.tty->low_latency = 1; - if (I_IGNPAR(state->port.tty)) + if (iflag & IGNPAR) the_port->ignore_status_mask &= ~(N_PARITY_ERROR | N_FRAMING_ERROR); - if (I_IGNBRK(state->port.tty)) { + if (iflag & IGNBRK) { the_port->ignore_status_mask &= ~N_BREAK; - if (I_IGNPAR(state->port.tty)) + if (iflag & IGNPAR) the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; } if (!(cflag & CREAD)) { diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 8ad28fc..fcfe826 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -1685,11 +1685,12 @@ ioc4_change_speed(struct uart_port *the_port, { struct ioc4_port *port = get_ioc4_port(the_port, 0); int baud, bits; - unsigned cflag; + unsigned cflag, iflag; int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; struct uart_state *state = the_port->state; cflag = new_termios->c_cflag; + iflag = new_termios->c_iflag; switch (cflag & CSIZE) { case CS5: @@ -1741,12 +1742,12 @@ ioc4_change_speed(struct uart_port *the_port, state->port.tty->low_latency = 1; - if (I_IGNPAR(state->port.tty)) + if (iflag & IGNPAR) the_port->ignore_status_mask &= ~(N_PARITY_ERROR | N_FRAMING_ERROR); - if (I_IGNBRK(state->port.tty)) { + if (iflag & IGNBRK) { the_port->ignore_status_mask &= ~N_BREAK; - if (I_IGNPAR(state->port.tty)) + if (iflag & IGNPAR) the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; } if (!(cflag & CREAD)) { diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c index 3351c3b..beb1afa2 100644 --- a/drivers/serial/max3100.c +++ b/drivers/serial/max3100.c @@ -430,17 +430,14 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios, int baud = 0; unsigned cflag; u32 param_new, param_mask, parity = 0; - struct tty_struct *tty = s->port.state->port.tty; dev_dbg(&s->spi->dev, "%s\n", __func__); - if (!tty) - return; cflag = termios->c_cflag; param_new = 0; param_mask = 0; - baud = tty_get_baud_rate(tty); + baud = tty_termios_baud_rate(termios); param_new = s->conf & MAX3100_BAUD; switch (baud) { case 300: @@ -485,7 +482,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios, default: baud = s->baud; } - tty_encode_baud_rate(tty, baud, baud); + tty_termios_encode_baud_rate(termios, baud, baud); s->baud = baud; param_mask |= MAX3100_BAUD; diff --git a/drivers/serial/max3107-aava.c b/drivers/serial/max3107-aava.c new file mode 100644 index 0000000..a1fe304 --- /dev/null +++ b/drivers/serial/max3107-aava.c @@ -0,0 +1,344 @@ +/* + * max3107.c - spi uart protocol driver for Maxim 3107 + * Based on max3100.c + * by Christian Pellegrin <chripell@evolware.org> + * and max3110.c + * by Feng Tang <feng.tang@intel.com> + * + * Copyright (C) Aavamobile 2009 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/spi/spi.h> +#include <linux/freezer.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/sfi.h> +#include <asm/mrst.h> +#include "max3107.h" + +/* GPIO direction to input function */ +static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration register */ + buf[0] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to input */ + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO configuration register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO direction to output function */ +static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration and data registers */ + buf[0] = MAX3107_GPIOCFG_REG; + buf[1] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to output */ + buf[0] |= (0x0001 << offset); + /* Set value */ + if (value) + buf[1] |= (0x0001 << offset); + else + buf[1] &= ~(0x0001 << offset); + + /* Write new GPIO configuration and data register values */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO conf data w failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO value query function */ +static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO data register */ + buf[0] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Return value */ + return buf[0] & (0x0001 << offset); +} + +/* GPIO value set function */ +static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return; + } + + /* Read current GPIO configuration registers*/ + buf[0] = MAX3107_GPIODATA_REG; + buf[1] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO data and config read failed\n"); + return; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + if (!(buf[1] & (0x0001 << offset))) { + /* Configured as input, can't set value */ + dev_warn(&s->spi->dev, + "Trying to set value for input GPIO\n"); + return; + } + + /* Set value */ + if (value) + buf[0] |= (0x0001 << offset); + else + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO data register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); +} + +/* GPIO chip data */ +static struct gpio_chip max3107_gpio_chip = { + .owner = THIS_MODULE, + .direction_input = max3107_gpio_direction_in, + .direction_output = max3107_gpio_direction_out, + .get = max3107_gpio_get, + .set = max3107_gpio_set, + .can_sleep = 1, + .base = MAX3107_GPIO_BASE, + .ngpio = MAX3107_GPIO_COUNT, +}; + +/** + * max3107_aava_reset - reset on AAVA systems + * @spi: The SPI device we are probing + * + * Reset the device ready for probing. + */ + +static int max3107_aava_reset(struct spi_device *spi) +{ + /* Reset the chip */ + if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { + pr_err("Requesting RESET GPIO failed\n"); + return -EIO; + } + if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { + pr_err("Setting RESET GPIO to 0 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + msleep(MAX3107_RESET_DELAY); + if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { + pr_err("Setting RESET GPIO to 1 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + gpio_free(MAX3107_RESET_GPIO); + msleep(MAX3107_WAKEUP_DELAY); + return 0; +} + +static int max3107_aava_configure(struct max3107_port *s) +{ + int retval; + + /* Initialize GPIO chip data */ + s->chip = max3107_gpio_chip; + s->chip.label = s->spi->modalias; + s->chip.dev = &s->spi->dev; + + /* Add GPIO chip */ + retval = gpiochip_add(&s->chip); + if (retval) { + dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); + return retval; + } + + /* Temporary fix for EV2 boot problems, set modem reset to 0 */ + max3107_gpio_direction_out(&s->chip, 3, 0); + return 0; +} + +#if 0 +/* This will get enabled once we have the board stuff merged for this + specific case */ + +static const struct baud_table brg13_ext[] = { + { 300, MAX3107_BRG13_B300 }, + { 600, MAX3107_BRG13_B600 }, + { 1200, MAX3107_BRG13_B1200 }, + { 2400, MAX3107_BRG13_B2400 }, + { 4800, MAX3107_BRG13_B4800 }, + { 9600, MAX3107_BRG13_B9600 }, + { 19200, MAX3107_BRG13_B19200 }, + { 57600, MAX3107_BRG13_B57600 }, + { 115200, MAX3107_BRG13_B115200 }, + { 230400, MAX3107_BRG13_B230400 }, + { 460800, MAX3107_BRG13_B460800 }, + { 921600, MAX3107_BRG13_B921600 }, + { 0, 0 } +}; + +static void max3107_aava_init(struct max3107_port *s) +{ + /*override for AAVA SC specific*/ + if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { + if (get_koski_build_id() <= KOSKI_EV2) + if (s->ext_clk) { + s->brg_cfg = MAX3107_BRG13_B9600; + s->baud_tbl = (struct baud_table *)brg13_ext; + } + } +} +#endif + +static int __devexit max3107_aava_remove(struct spi_device *spi) +{ + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + /* Remove GPIO chip */ + if (gpiochip_remove(&s->chip)) + dev_warn(&spi->dev, "Removing GPIO chip failed\n"); + + /* Then do the default remove */ + return max3107_remove(spi); +} + +/* Platform data */ +static struct max3107_plat aava_plat_data = { + .loopback = 0, + .ext_clk = 1, +/* .init = max3107_aava_init, */ + .configure = max3107_aava_configure, + .hw_suspend = max3107_hw_susp, + .polled_mode = 0, + .poll_time = 0, +}; + + +static int __devinit max3107_probe_aava(struct spi_device *spi) +{ + int err = max3107_aava_reset(spi); + if (err < 0) + return err; + return max3107_probe(spi, &aava_plat_data); +} + +/* Spi driver data */ +static struct spi_driver max3107_driver = { + .driver = { + .name = "aava-max3107", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = max3107_probe_aava, + .remove = __devexit_p(max3107_aava_remove), + .suspend = max3107_suspend, + .resume = max3107_resume, +}; + +/* Driver init function */ +static int __init max3107_init(void) +{ + return spi_register_driver(&max3107_driver); +} + +/* Driver exit function */ +static void __exit max3107_exit(void) +{ + spi_unregister_driver(&max3107_driver); +} + +module_init(max3107_init); +module_exit(max3107_exit); + +MODULE_DESCRIPTION("MAX3107 driver"); +MODULE_AUTHOR("Aavamobile"); +MODULE_ALIAS("aava-max3107-spi"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/max3107.c b/drivers/serial/max3107.c new file mode 100644 index 0000000..67283c1 --- /dev/null +++ b/drivers/serial/max3107.c @@ -0,0 +1,1197 @@ +/* + * max3107.c - spi uart protocol driver for Maxim 3107 + * Based on max3100.c + * by Christian Pellegrin <chripell@evolware.org> + * and max3110.c + * by Feng Tang <feng.tang@intel.com> + * + * Copyright (C) Aavamobile 2009 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/freezer.h> +#include "max3107.h" + +static const struct baud_table brg26_ext[] = { + { 300, MAX3107_BRG26_B300 }, + { 600, MAX3107_BRG26_B600 }, + { 1200, MAX3107_BRG26_B1200 }, + { 2400, MAX3107_BRG26_B2400 }, + { 4800, MAX3107_BRG26_B4800 }, + { 9600, MAX3107_BRG26_B9600 }, + { 19200, MAX3107_BRG26_B19200 }, + { 57600, MAX3107_BRG26_B57600 }, + { 115200, MAX3107_BRG26_B115200 }, + { 230400, MAX3107_BRG26_B230400 }, + { 460800, MAX3107_BRG26_B460800 }, + { 921600, MAX3107_BRG26_B921600 }, + { 0, 0 } +}; + +static const struct baud_table brg13_int[] = { + { 300, MAX3107_BRG13_IB300 }, + { 600, MAX3107_BRG13_IB600 }, + { 1200, MAX3107_BRG13_IB1200 }, + { 2400, MAX3107_BRG13_IB2400 }, + { 4800, MAX3107_BRG13_IB4800 }, + { 9600, MAX3107_BRG13_IB9600 }, + { 19200, MAX3107_BRG13_IB19200 }, + { 57600, MAX3107_BRG13_IB57600 }, + { 115200, MAX3107_BRG13_IB115200 }, + { 230400, MAX3107_BRG13_IB230400 }, + { 460800, MAX3107_BRG13_IB460800 }, + { 921600, MAX3107_BRG13_IB921600 }, + { 0, 0 } +}; + +static u32 get_new_brg(int baud, struct max3107_port *s) +{ + int i; + const struct baud_table *baud_tbl = s->baud_tbl; + + for (i = 0; i < 13; i++) { + if (baud == baud_tbl[i].baud) + return baud_tbl[i].new_brg; + } + + return 0; +} + +/* Perform SPI transfer for write/read of device register(s) */ +int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) +{ + struct spi_message spi_msg; + struct spi_transfer spi_xfer; + + /* Initialize SPI ,message */ + spi_message_init(&spi_msg); + + /* Initialize SPI transfer */ + memset(&spi_xfer, 0, sizeof spi_xfer); + spi_xfer.len = len; + spi_xfer.tx_buf = tx; + spi_xfer.rx_buf = rx; + spi_xfer.speed_hz = MAX3107_SPI_SPEED; + + /* Add SPI transfer to SPI message */ + spi_message_add_tail(&spi_xfer, &spi_msg); + +#ifdef DBG_TRACE_SPI_DATA + { + int i; + pr_info("tx len %d:\n", spi_xfer.len); + for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) + pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]); + pr_info("\n"); + } +#endif + + /* Perform synchronous SPI transfer */ + if (spi_sync(s->spi, &spi_msg)) { + dev_err(&s->spi->dev, "spi_sync failure\n"); + return -EIO; + } + +#ifdef DBG_TRACE_SPI_DATA + if (spi_xfer.rx_buf) { + int i; + pr_info("rx len %d:\n", spi_xfer.len); + for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) + pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]); + pr_info("\n"); + } +#endif + return 0; +} +EXPORT_SYMBOL_GPL(max3107_rw); + +/* Puts received data to circular buffer */ +static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data, + int len) +{ + struct uart_port *port = &s->port; + struct tty_struct *tty; + + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; + + /* Insert received data */ + tty_insert_flip_string(tty, data, len); + /* Update RX counter */ + port->icount.rx += len; +} + +/* Handle data receiving */ +static void max3107_handlerx(struct max3107_port *s, u16 rxlvl) +{ + int i; + int j; + int len; /* SPI transfer buffer length */ + u16 *buf; + u8 *valid_str; + + if (!s->rx_enabled) + /* RX is disabled */ + return; + + if (rxlvl == 0) { + /* RX fifo is empty */ + return; + } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) { + dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl); + /* Ensure sanity of RX level */ + rxlvl = MAX3107_RX_FIFO_SIZE; + } + if ((s->rxbuf == 0) || (s->rxstr == 0)) { + dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n"); + return; + } + buf = s->rxbuf; + valid_str = s->rxstr; + while (rxlvl) { + pr_debug("rxlvl %d\n", rxlvl); + /* Clear buffer */ + memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2)); + len = 0; + if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) { + /* First disable RX FIFO interrupt */ + pr_debug("Disabling RX INT\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT; + buf[0] |= s->irqen_reg; + len++; + } + /* Just increase the length by amount of words in FIFO since + * buffer was zeroed and SPI transfer of 0x0000 means reading + * from RX FIFO + */ + len += rxlvl; + /* Append RX level query */ + buf[len] = MAX3107_RXFIFOLVL_REG; + len++; + + /* Perform the SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) { + dev_err(&s->spi->dev, "SPI transfer for RX h failed\n"); + return; + } + + /* Skip RX FIFO interrupt disabling word if it was added */ + j = ((len - 1) - rxlvl); + /* Read received words */ + for (i = 0; i < rxlvl; i++, j++) + valid_str[i] = (u8)buf[j]; + put_data_to_circ_buf(s, valid_str, rxlvl); + /* Get new RX level */ + rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK); + } + + if (s->rx_enabled) { + /* RX still enabled, re-enable RX FIFO interrupt */ + pr_debug("Enabling RX INT\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; + buf[0] |= s->irqen_reg; + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n"); + } + + /* Push the received data to receivers */ + if (s->port.state->port.tty) + tty_flip_buffer_push(s->port.state->port.tty); +} + + +/* Handle data sending */ +static void max3107_handletx(struct max3107_port *s) +{ + struct circ_buf *xmit = &s->port.state->xmit; + int i; + unsigned long flags; + int len; /* SPI transfer buffer length */ + u16 *buf; + + if (!s->tx_fifo_empty) + /* Don't send more data before previous data is sent */ + return; + + if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port)) + /* No data to send or TX is stopped */ + return; + + if (!s->txbuf) { + dev_warn(&s->spi->dev, "Txbuf isn't ready\n"); + return; + } + buf = s->txbuf; + /* Get length of data pending in circular buffer */ + len = uart_circ_chars_pending(xmit); + if (len) { + /* Limit to size of TX FIFO */ + if (len > MAX3107_TX_FIFO_SIZE) + len = MAX3107_TX_FIFO_SIZE; + + pr_debug("txlen %d\n", len); + + /* Update TX counter */ + s->port.icount.tx += len; + + /* TX FIFO will no longer be empty */ + s->tx_fifo_empty = 0; + + i = 0; + if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) { + /* First disable TX empty interrupt */ + pr_debug("Disabling TE INT\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT; + buf[i] |= s->irqen_reg; + i++; + len++; + } + /* Add data to send */ + spin_lock_irqsave(&s->port.lock, flags); + for ( ; i < len ; i++) { + buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG); + buf[i] |= ((u16)xmit->buf[xmit->tail] & + MAX3107_SPI_TX_DATA_MASK); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } + spin_unlock_irqrestore(&s->port.lock, flags); + if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) { + /* Enable TX empty interrupt */ + pr_debug("Enabling TE INT\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT; + buf[i] |= s->irqen_reg; + i++; + len++; + } + if (!s->tx_enabled) { + /* Enable TX */ + pr_debug("Enable TX\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT; + buf[i] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + s->tx_enabled = 1; + i++; + len++; + } + + /* Perform the SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, len*2)) { + dev_err(&s->spi->dev, + "SPI transfer TX handling failed\n"); + return; + } + } + + /* Indicate wake up if circular buffer is getting low on data */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + +} + +/* Handle interrupts + * Also reads and returns current RX FIFO level + */ +static u16 handle_interrupt(struct max3107_port *s) +{ + u16 buf[4]; /* Buffer for SPI transfers */ + u8 irq_status; + u16 rx_level; + unsigned long flags; + + /* Read IRQ status register */ + buf[0] = MAX3107_IRQSTS_REG; + /* Read status IRQ status register */ + buf[1] = MAX3107_STS_IRQSTS_REG; + /* Read LSR IRQ status register */ + buf[2] = MAX3107_LSR_IRQSTS_REG; + /* Query RX level */ + buf[3] = MAX3107_RXFIFOLVL_REG; + + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) { + dev_err(&s->spi->dev, + "SPI transfer for INTR handling failed\n"); + return 0; + } + + irq_status = (u8)buf[0]; + pr_debug("IRQSTS %x\n", irq_status); + rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK); + + if (irq_status & MAX3107_IRQ_LSR_BIT) { + /* LSR interrupt */ + if (buf[2] & MAX3107_LSR_RXTO_BIT) + /* RX timeout interrupt, + * handled by normal RX handling + */ + pr_debug("RX TO INT\n"); + } + + if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) { + /* Tx empty interrupt, + * disable TX and set tx_fifo_empty flag + */ + pr_debug("TE INT, disabling TX\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; + buf[0] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer TX dis failed\n"); + s->tx_enabled = 0; + s->tx_fifo_empty = 1; + } + + if (irq_status & MAX3107_IRQ_RXFIFO_BIT) + /* RX FIFO interrupt, + * handled by normal RX handling + */ + pr_debug("RFIFO INT\n"); + + /* Return RX level */ + return rx_level; +} + +/* Trigger work thread*/ +static void max3107_dowork(struct max3107_port *s) +{ + if (!work_pending(&s->work) && !freezing(current) && !s->suspended) + queue_work(s->workqueue, &s->work); + else + dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n"); +} + +/* Work thread */ +static void max3107_work(struct work_struct *w) +{ + struct max3107_port *s = container_of(w, struct max3107_port, work); + u16 rxlvl = 0; + int len; /* SPI transfer buffer length */ + u16 buf[5]; /* Buffer for SPI transfers */ + unsigned long flags; + + /* Start by reading current RX FIFO level */ + buf[0] = MAX3107_RXFIFOLVL_REG; + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer RX lev failed\n"); + rxlvl = 0; + } else { + rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK); + } + + do { + pr_debug("rxlvl %d\n", rxlvl); + + /* Handle RX */ + max3107_handlerx(s, rxlvl); + rxlvl = 0; + + if (s->handle_irq) { + /* Handle pending interrupts + * We also get new RX FIFO level since new data may + * have been received while pushing received data to + * receivers + */ + s->handle_irq = 0; + rxlvl = handle_interrupt(s); + } + + /* Handle TX */ + max3107_handletx(s); + + /* Handle configuration changes */ + len = 0; + spin_lock_irqsave(&s->data_lock, flags); + if (s->mode1_commit) { + pr_debug("mode1_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + buf[len++] |= s->mode1_reg; + s->mode1_commit = 0; + } + if (s->lcr_commit) { + pr_debug("lcr_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG); + buf[len++] |= s->lcr_reg; + s->lcr_commit = 0; + } + if (s->brg_commit) { + pr_debug("brg_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG); + buf[len++] |= ((s->brg_cfg >> 16) & + MAX3107_SPI_TX_DATA_MASK); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG); + buf[len++] |= ((s->brg_cfg >> 8) & + MAX3107_SPI_TX_DATA_MASK); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG); + buf[len++] |= ((s->brg_cfg) & 0xff); + s->brg_commit = 0; + } + spin_unlock_irqrestore(&s->data_lock, flags); + + if (len > 0) { + if (max3107_rw(s, (u8 *)buf, NULL, len * 2)) + dev_err(&s->spi->dev, + "SPI transfer config failed\n"); + } + + /* Reloop if interrupt handling indicated data in RX FIFO */ + } while (rxlvl); + +} + +/* Set sleep mode */ +static void max3107_set_sleep(struct max3107_port *s, int mode) +{ + u16 buf[1]; /* Buffer for SPI transfer */ + unsigned long flags; + pr_debug("enter, mode %d\n", mode); + + buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + switch (mode) { + case MAX3107_DISABLE_FORCED_SLEEP: + s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT; + break; + case MAX3107_ENABLE_FORCED_SLEEP: + s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT; + break; + case MAX3107_DISABLE_AUTOSLEEP: + s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT; + break; + case MAX3107_ENABLE_AUTOSLEEP: + s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT; + break; + default: + spin_unlock_irqrestore(&s->data_lock, flags); + dev_warn(&s->spi->dev, "invalid sleep mode\n"); + return; + } + buf[0] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n"); + + if (mode == MAX3107_DISABLE_AUTOSLEEP || + mode == MAX3107_DISABLE_FORCED_SLEEP) + msleep(MAX3107_WAKEUP_DELAY); +} + +/* Perform full register initialization */ +static void max3107_register_init(struct max3107_port *s) +{ + u16 buf[11]; /* Buffer for SPI transfers */ + + /* 1. Configure baud rate, 9600 as default */ + s->baud = 9600; + /* the below is default*/ + if (s->ext_clk) { + s->brg_cfg = MAX3107_BRG26_B9600; + s->baud_tbl = (struct baud_table *)brg26_ext; + } else { + s->brg_cfg = MAX3107_BRG13_IB9600; + s->baud_tbl = (struct baud_table *)brg13_int; + } + + if (s->pdata->init) + s->pdata->init(s); + + buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG) + | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK); + buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG) + | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK); + buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG) + | ((s->brg_cfg) & 0xff); + + /* 2. Configure LCR register, 8N1 mode by default */ + s->lcr_reg = MAX3107_LCR_WORD_LEN_8; + buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG) + | s->lcr_reg; + + /* 3. Configure MODE 1 register */ + s->mode1_reg = 0; + /* Enable IRQ pin */ + s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT; + /* Disable TX */ + s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; + s->tx_enabled = 0; + /* RX is enabled */ + s->rx_enabled = 1; + buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG) + | s->mode1_reg; + + /* 4. Configure MODE 2 register */ + buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); + if (s->loopback) { + /* Enable loopback */ + buf[5] |= MAX3107_MODE2_LOOPBACK_BIT; + } + /* Reset FIFOs */ + buf[5] |= MAX3107_MODE2_FIFORST_BIT; + s->tx_fifo_empty = 1; + + /* 5. Configure FIFO trigger level register */ + buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG); + /* RX FIFO trigger for 16 words, TX FIFO trigger not used */ + buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0)); + + /* 6. Configure flow control levels */ + buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG); + /* Flow control halt level 96, resume level 48 */ + buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96)); + + /* 7. Configure flow control */ + buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG); + /* Enable auto CTS and auto RTS flow control */ + buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT); + + /* 8. Configure RX timeout register */ + buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG); + /* Timeout after 48 character intervals */ + buf[9] |= 0x0030; + + /* 9. Configure LSR interrupt enable register */ + buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG); + /* Enable RX timeout interrupt */ + buf[10] |= MAX3107_LSR_RXTO_BIT; + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 22)) + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + + /* 10. Clear IRQ status register by reading it */ + buf[0] = MAX3107_IRQSTS_REG; + + /* 11. Configure interrupt enable register */ + /* Enable LSR interrupt */ + s->irqen_reg = MAX3107_IRQ_LSR_BIT; + /* Enable RX FIFO interrupt */ + s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; + buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG) + | s->irqen_reg; + + /* 12. Clear FIFO reset that was set in step 6 */ + buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); + if (s->loopback) { + /* Keep loopback enabled */ + buf[2] |= MAX3107_MODE2_LOOPBACK_BIT; + } + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6)) + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + +} + +/* IRQ handler */ +static irqreturn_t max3107_irq(int irqno, void *dev_id) +{ + struct max3107_port *s = dev_id; + + if (irqno != s->spi->irq) { + /* Unexpected IRQ */ + return IRQ_NONE; + } + + /* Indicate irq */ + s->handle_irq = 1; + + /* Trigger work thread */ + max3107_dowork(s); + + return IRQ_HANDLED; +} + +/* HW suspension function + * + * Currently autosleep is used to decrease current consumption, alternative + * approach would be to set the chip to reset mode if UART is not being + * used but that would mess the GPIOs + * + */ +void max3107_hw_susp(struct max3107_port *s, int suspend) +{ + pr_debug("enter, suspend %d\n", suspend); + + if (suspend) { + /* Suspend requested, + * enable autosleep to decrease current consumption + */ + s->suspended = 1; + max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP); + } else { + /* Resume requested, + * disable autosleep + */ + s->suspended = 0; + max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP); + } +} +EXPORT_SYMBOL_GPL(max3107_hw_susp); + +/* Modem status IRQ enabling */ +static void max3107_enable_ms(struct uart_port *port) +{ + /* Modem status not supported */ +} + +/* Data send function */ +static void max3107_start_tx(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + /* Trigger work thread for sending data */ + max3107_dowork(s); +} + +/* Function for checking that there is no pending transfers */ +static unsigned int max3107_tx_empty(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + pr_debug("returning %d\n", + (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit))); + return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit); +} + +/* Function for stopping RX */ +static void max3107_stop_rx(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + unsigned long flags; + + /* Set RX disabled in MODE 1 register */ + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT; + s->mode1_commit = 1; + spin_unlock_irqrestore(&s->data_lock, flags); + /* Set RX disabled */ + s->rx_enabled = 0; + /* Trigger work thread for doing the actual configuration change */ + max3107_dowork(s); +} + +/* Function for returning control pin states */ +static unsigned int max3107_get_mctrl(struct uart_port *port) +{ + /* DCD and DSR are not wired and CTS/RTS is handled automatically + * so just indicate DSR and CAR asserted + */ + return TIOCM_DSR | TIOCM_CAR; +} + +/* Function for setting control pin states */ +static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* DCD and DSR are not wired and CTS/RTS is hadnled automatically + * so do nothing + */ +} + +/* Function for configuring UART parameters */ +static void max3107_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + struct tty_struct *tty; + int baud; + u16 new_lcr = 0; + u32 new_brg = 0; + unsigned long flags; + + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; + + /* Get new LCR register values */ + /* Word size */ + if ((termios->c_cflag & CSIZE) == CS7) + new_lcr |= MAX3107_LCR_WORD_LEN_7; + else + new_lcr |= MAX3107_LCR_WORD_LEN_8; + + /* Parity */ + if (termios->c_cflag & PARENB) { + new_lcr |= MAX3107_LCR_PARITY_BIT; + if (!(termios->c_cflag & PARODD)) + new_lcr |= MAX3107_LCR_EVENPARITY_BIT; + } + + /* Stop bits */ + if (termios->c_cflag & CSTOPB) { + /* 2 stop bits */ + new_lcr |= MAX3107_LCR_STOPLEN_BIT; + } + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + + /* Set status ignore mask */ + s->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + s->port.ignore_status_mask |= MAX3107_ALL_ERRORS; + + /* Set low latency to immediately handle pushed data */ + s->port.state->port.tty->low_latency = 1; + + /* Get new baud rate generator configuration */ + baud = tty_get_baud_rate(tty); + + spin_lock_irqsave(&s->data_lock, flags); + new_brg = get_new_brg(baud, s); + /* if can't find the corrent config, use previous */ + if (!new_brg) { + baud = s->baud; + new_brg = s->brg_cfg; + } + spin_unlock_irqrestore(&s->data_lock, flags); + tty_termios_encode_baud_rate(termios, baud, baud); + s->baud = baud; + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); + + spin_lock_irqsave(&s->data_lock, flags); + if (s->lcr_reg != new_lcr) { + s->lcr_reg = new_lcr; + s->lcr_commit = 1; + } + if (s->brg_cfg != new_brg) { + s->brg_cfg = new_brg; + s->brg_commit = 1; + } + spin_unlock_irqrestore(&s->data_lock, flags); + + /* Trigger work thread for doing the actual configuration change */ + max3107_dowork(s); +} + +/* Port shutdown function */ +static void max3107_shutdown(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + if (s->suspended && s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); + + /* Free the interrupt */ + free_irq(s->spi->irq, s); + + if (s->workqueue) { + /* Flush and destroy work queue */ + flush_workqueue(s->workqueue); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + } + + /* Suspend HW */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 1); +} + +/* Port startup function */ +static int max3107_startup(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + /* Initialize work queue */ + s->workqueue = create_freezeable_workqueue("max3107"); + if (!s->workqueue) { + dev_err(&s->spi->dev, "Workqueue creation failed\n"); + return -EBUSY; + } + INIT_WORK(&s->work, max3107_work); + + /* Setup IRQ */ + if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING, + "max3107", s)) { + dev_err(&s->spi->dev, "IRQ reguest failed\n"); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + return -EBUSY; + } + + /* Resume HW */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); + + /* Init registers */ + max3107_register_init(s); + + return 0; +} + +/* Port type function */ +static const char *max3107_type(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + return s->spi->modalias; +} + +/* Port release function */ +static void max3107_release_port(struct uart_port *port) +{ + /* Do nothing */ +} + +/* Port request function */ +static int max3107_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +/* Port config function */ +static void max3107_config_port(struct uart_port *port, int flags) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + s->port.type = PORT_MAX3107; +} + +/* Port verify function */ +static int max3107_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107) + return 0; + + return -EINVAL; +} + +/* Port stop TX function */ +static void max3107_stop_tx(struct uart_port *port) +{ + /* Do nothing */ +} + +/* Port break control function */ +static void max3107_break_ctl(struct uart_port *port, int break_state) +{ + /* We don't support break control, do nothing */ +} + + +/* Port functions */ +static struct uart_ops max3107_ops = { + .tx_empty = max3107_tx_empty, + .set_mctrl = max3107_set_mctrl, + .get_mctrl = max3107_get_mctrl, + .stop_tx = max3107_stop_tx, + .start_tx = max3107_start_tx, + .stop_rx = max3107_stop_rx, + .enable_ms = max3107_enable_ms, + .break_ctl = max3107_break_ctl, + .startup = max3107_startup, + .shutdown = max3107_shutdown, + .set_termios = max3107_set_termios, + .type = max3107_type, + .release_port = max3107_release_port, + .request_port = max3107_request_port, + .config_port = max3107_config_port, + .verify_port = max3107_verify_port, +}; + +/* UART driver data */ +static struct uart_driver max3107_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyMAX", + .dev_name = "ttyMAX", + .nr = 1, +}; + +static int driver_registered = 0; + + + +/* 'Generic' platform data */ +static struct max3107_plat generic_plat_data = { + .loopback = 0, + .ext_clk = 1, + .hw_suspend = max3107_hw_susp, + .polled_mode = 0, + .poll_time = 0, +}; + + +/*******************************************************************/ + +/** + * max3107_probe - SPI bus probe entry point + * @spi: the spi device + * + * SPI wants us to probe this device and if appropriate claim it. + * Perform any platform specific requirements and then initialise + * the device. + */ + +int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata) +{ + struct max3107_port *s; + u16 buf[2]; /* Buffer for SPI transfers */ + int retval; + + pr_info("enter max3107 probe\n"); + + /* Allocate port structure */ + s = kzalloc(sizeof(*s), GFP_KERNEL); + if (!s) { + pr_err("Allocating port structure failed\n"); + return -ENOMEM; + } + + s->pdata = pdata; + + /* SPI Rx buffer + * +2 for RX FIFO interrupt + * disabling and RX level query + */ + s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL); + if (!s->rxbuf) { + pr_err("Allocating RX buffer failed\n"); + return -ENOMEM; + } + s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL); + if (!s->rxstr) { + pr_err("Allocating RX buffer failed\n"); + return -ENOMEM; + } + /* SPI Tx buffer + * SPI transfer buffer + * +3 for TX FIFO empty + * interrupt disabling and + * enabling and TX enabling + */ + s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL); + if (!s->txbuf) { + pr_err("Allocating TX buffer failed\n"); + return -ENOMEM; + } + /* Initialize shared data lock */ + spin_lock_init(&s->data_lock); + + /* SPI intializations */ + dev_set_drvdata(&spi->dev, s); + spi->mode = SPI_MODE_0; + spi->dev.platform_data = pdata; + spi->bits_per_word = 16; + s->ext_clk = pdata->ext_clk; + s->loopback = pdata->loopback; + spi_setup(spi); + s->spi = spi; + + /* Check REV ID to ensure we are talking to what we expect */ + buf[0] = MAX3107_REVID_REG; + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n"); + return -EIO; + } + if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 && + (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) { + dev_err(&s->spi->dev, "REVID %x does not match\n", + (buf[0] & MAX3107_SPI_RX_DATA_MASK)); + return -ENODEV; + } + + /* Disable all interrupts */ + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000); + buf[0] |= 0x0000; + + /* Configure clock source */ + buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG); + if (s->ext_clk) { + /* External clock */ + buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT; + } + + /* PLL bypass ON */ + buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT; + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 4)) { + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + return -EIO; + } + + /* Register UART driver */ + if (!driver_registered) { + retval = uart_register_driver(&max3107_uart_driver); + if (retval) { + dev_err(&s->spi->dev, "Registering UART driver failed\n"); + return retval; + } + driver_registered = 1; + } + + /* Initialize UART port data */ + s->port.fifosize = 128; + s->port.ops = &max3107_ops; + s->port.line = 0; + s->port.dev = &spi->dev; + s->port.uartclk = 9600; + s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + s->port.irq = s->spi->irq; + s->port.type = PORT_MAX3107; + + /* Add UART port */ + retval = uart_add_one_port(&max3107_uart_driver, &s->port); + if (retval < 0) { + dev_err(&s->spi->dev, "Adding UART port failed\n"); + return retval; + } + + if (pdata->configure) { + retval = pdata->configure(s); + if (retval < 0) + return retval; + } + + /* Go to suspend mode */ + if (pdata->hw_suspend) + pdata->hw_suspend(s, 1); + + return 0; +} +EXPORT_SYMBOL_GPL(max3107_probe); + +/* Driver remove function */ +int max3107_remove(struct spi_device *spi) +{ + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_info("enter max3107 remove\n"); + + /* Remove port */ + if (uart_remove_one_port(&max3107_uart_driver, &s->port)) + dev_warn(&s->spi->dev, "Removing UART port failed\n"); + + + /* Free TxRx buffer */ + kfree(s->rxbuf); + kfree(s->rxstr); + kfree(s->txbuf); + + /* Free port structure */ + kfree(s); + + return 0; +} +EXPORT_SYMBOL_GPL(max3107_remove); + +/* Driver suspend function */ +int max3107_suspend(struct spi_device *spi, pm_message_t state) +{ +#ifdef CONFIG_PM + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_debug("enter suspend\n"); + + /* Suspend UART port */ + uart_suspend_port(&max3107_uart_driver, &s->port); + + /* Go to suspend mode */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 1); +#endif /* CONFIG_PM */ + return 0; +} +EXPORT_SYMBOL_GPL(max3107_suspend); + +/* Driver resume function */ +int max3107_resume(struct spi_device *spi) +{ +#ifdef CONFIG_PM + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_debug("enter resume\n"); + + /* Resume from suspend */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); + + /* Resume UART port */ + uart_resume_port(&max3107_uart_driver, &s->port); +#endif /* CONFIG_PM */ + return 0; +} +EXPORT_SYMBOL_GPL(max3107_resume); + +static int max3107_probe_generic(struct spi_device *spi) +{ + return max3107_probe(spi, &generic_plat_data); +} + +/* Spi driver data */ +static struct spi_driver max3107_driver = { + .driver = { + .name = "max3107", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = max3107_probe_generic, + .remove = __devexit_p(max3107_remove), + .suspend = max3107_suspend, + .resume = max3107_resume, +}; + +/* Driver init function */ +static int __init max3107_init(void) +{ + pr_info("enter max3107 init\n"); + return spi_register_driver(&max3107_driver); +} + +/* Driver exit function */ +static void __exit max3107_exit(void) +{ + pr_info("enter max3107 exit\n"); + /* Unregister UART driver */ + if (driver_registered) + uart_unregister_driver(&max3107_uart_driver); + spi_unregister_driver(&max3107_driver); +} + +module_init(max3107_init); +module_exit(max3107_exit); + +MODULE_DESCRIPTION("MAX3107 driver"); +MODULE_AUTHOR("Aavamobile"); +MODULE_ALIAS("max3107-spi"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/max3107.h b/drivers/serial/max3107.h new file mode 100644 index 0000000..7ab63239 --- /dev/null +++ b/drivers/serial/max3107.h @@ -0,0 +1,441 @@ +/* + * max3107.h - spi uart protocol driver header for Maxim 3107 + * + * Copyright (C) Aavamobile 2009 + * Based on serial_max3100.h by Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _MAX3107_H +#define _MAX3107_H + +/* Serial error status definitions */ +#define MAX3107_PARITY_ERROR 1 +#define MAX3107_FRAME_ERROR 2 +#define MAX3107_OVERRUN_ERROR 4 +#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \ + MAX3107_FRAME_ERROR | \ + MAX3107_OVERRUN_ERROR) + +/* GPIO definitions */ +#define MAX3107_GPIO_BASE 88 +#define MAX3107_GPIO_COUNT 4 + + +/* GPIO connected to chip's reset pin */ +#define MAX3107_RESET_GPIO 87 + + +/* Chip reset delay */ +#define MAX3107_RESET_DELAY 10 + +/* Chip wakeup delay */ +#define MAX3107_WAKEUP_DELAY 50 + + +/* Sleep mode definitions */ +#define MAX3107_DISABLE_FORCED_SLEEP 0 +#define MAX3107_ENABLE_FORCED_SLEEP 1 +#define MAX3107_DISABLE_AUTOSLEEP 2 +#define MAX3107_ENABLE_AUTOSLEEP 3 + + +/* Definitions for register access with SPI transfers + * + * SPI transfer format: + * + * Master to slave bits xzzzzzzzyyyyyyyy + * Slave to master bits aaaaaaaabbbbbbbb + * + * where: + * x = 0 for reads, 1 for writes + * z = register address + * y = new register value if write, 0 if read + * a = unspecified + * b = register value if read, unspecified if write + */ + +/* SPI speed */ +#define MAX3107_SPI_SPEED (3125000 * 2) + +/* Write bit */ +#define MAX3107_WRITE_BIT (1 << 15) + +/* SPI TX data mask */ +#define MAX3107_SPI_RX_DATA_MASK (0x00ff) + +/* SPI RX data mask */ +#define MAX3107_SPI_TX_DATA_MASK (0x00ff) + +/* Register access masks */ +#define MAX3107_RHR_REG (0x0000) /* RX FIFO */ +#define MAX3107_THR_REG (0x0000) /* TX FIFO */ +#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */ +#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */ +#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */ +#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */ +#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */ +#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */ +#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */ +#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */ +#define MAX3107_MODE1_REG (0x0900) /* MODE1 */ +#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */ +#define MAX3107_LCR_REG (0x0b00) /* LCR */ +#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */ +#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */ +#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */ +#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */ +#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */ +#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */ +#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */ +#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */ +#define MAX3107_XON1_REG (0x1400) /* XON1 character */ +#define MAX3107_XON2_REG (0x1500) /* XON2 character */ +#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */ +#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */ +#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */ +#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */ +#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */ +#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */ +#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */ +#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */ +#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */ +#define MAX3107_REVID_REG (0x1f00) /* Revision identification */ + +/* IRQ register bits */ +#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ +#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */ +#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */ +#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */ +#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */ +#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */ +#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */ +#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */ + +/* LSR register bits */ +#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */ +#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */ +#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */ +#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */ +#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */ +#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */ +#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */ + +/* Special character register bits */ +#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */ +#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */ +#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */ +#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */ +#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */ +#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */ +#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Status register bits */ +#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */ +#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */ +#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */ +#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */ +#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */ +#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */ +#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */ +#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* MODE1 register bits */ +#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */ +#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */ +#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */ +#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */ +#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */ +#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */ +#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */ +#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */ + +/* MODE2 register bits */ +#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */ +#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */ +#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */ +#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */ +#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */ +#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */ +#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */ +#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */ + +/* LCR register bits */ +#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ +#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 + * + * Word length bits table: + * 00 -> 5 bit words + * 01 -> 6 bit words + * 10 -> 7 bit words + * 11 -> 8 bit words + */ +#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit + * + * STOP length bit table: + * 0 -> 1 stop bit + * 1 -> 1-1.5 stop bits if + * word length is 5, + * 2 stop bits otherwise + */ +#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ +#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ +#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ +#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ +#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */ +#define MAX3107_LCR_WORD_LEN_5 (0x0000) +#define MAX3107_LCR_WORD_LEN_6 (0x0001) +#define MAX3107_LCR_WORD_LEN_7 (0x0002) +#define MAX3107_LCR_WORD_LEN_8 (0x0003) + + +/* IRDA register bits */ +#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ +#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ +#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */ +#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */ +#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */ +#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */ +#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Flow control trigger level register masks */ +#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ +#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */ +#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f) +#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4) + +/* FIFO interrupt trigger level register masks */ +#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */ +#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */ +#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f) +#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4) + +/* Flow control register bits */ +#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */ +#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */ +#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs + * are used in conjunction with + * XOFF2 for definition of + * special character */ +#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */ +#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */ +#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1 + * + * SWFLOW bits 1 & 0 table: + * 00 -> no transmitter flow + * control + * 01 -> receiver compares + * XON2 and XOFF2 + * and controls + * transmitter + * 10 -> receiver compares + * XON1 and XOFF1 + * and controls + * transmitter + * 11 -> receiver compares + * XON1, XON2, XOFF1 and + * XOFF2 and controls + * transmitter + */ +#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */ +#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no received flow + * control + * 01 -> transmitter generates + * XON2 and XOFF2 + * 10 -> transmitter generates + * XON1 and XOFF1 + * 11 -> transmitter generates + * XON1, XON2, XOFF1 and + * XOFF2 + */ + +/* GPIO configuration register bits */ +#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */ +#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */ +#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */ +#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */ +#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */ +#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */ +#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */ +#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */ + +/* GPIO DATA register bits */ +#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */ +#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */ +#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */ +#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */ +#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */ +#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */ +#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */ +#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */ + +/* PLL configuration register masks */ +#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */ +#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */ + +/* Baud rate generator configuration register masks and bits */ +#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of + * Baud rate generator divisor + */ +#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */ +#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */ +#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Clock source register bits */ +#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */ +#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */ +#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */ +#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */ +#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ +#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */ +#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ + + +/* HW definitions */ +#define MAX3107_RX_FIFO_SIZE 128 +#define MAX3107_TX_FIFO_SIZE 128 +#define MAX3107_REVID1 0x00a0 +#define MAX3107_REVID2 0x00a1 + + +/* Baud rate generator configuration values for external clock 13MHz */ +#define MAX3107_BRG13_B300 (0x0A9400 | 0x05) +#define MAX3107_BRG13_B600 (0x054A00 | 0x03) +#define MAX3107_BRG13_B1200 (0x02A500 | 0x01) +#define MAX3107_BRG13_B2400 (0x015200 | 0x09) +#define MAX3107_BRG13_B4800 (0x00A900 | 0x04) +#define MAX3107_BRG13_B9600 (0x005400 | 0x0A) +#define MAX3107_BRG13_B19200 (0x002A00 | 0x05) +#define MAX3107_BRG13_B38400 (0x001500 | 0x03) +#define MAX3107_BRG13_B57600 (0x000E00 | 0x02) +#define MAX3107_BRG13_B115200 (0x000700 | 0x01) +#define MAX3107_BRG13_B230400 (0x000300 | 0x08) +#define MAX3107_BRG13_B460800 (0x000100 | 0x0c) +#define MAX3107_BRG13_B921600 (0x000100 | 0x1c) + +/* Baud rate generator configuration values for external clock 26MHz */ +#define MAX3107_BRG26_B300 (0x152800 | 0x0A) +#define MAX3107_BRG26_B600 (0x0A9400 | 0x05) +#define MAX3107_BRG26_B1200 (0x054A00 | 0x03) +#define MAX3107_BRG26_B2400 (0x02A500 | 0x01) +#define MAX3107_BRG26_B4800 (0x015200 | 0x09) +#define MAX3107_BRG26_B9600 (0x00A900 | 0x04) +#define MAX3107_BRG26_B19200 (0x005400 | 0x0A) +#define MAX3107_BRG26_B38400 (0x002A00 | 0x05) +#define MAX3107_BRG26_B57600 (0x001C00 | 0x03) +#define MAX3107_BRG26_B115200 (0x000E00 | 0x02) +#define MAX3107_BRG26_B230400 (0x000700 | 0x01) +#define MAX3107_BRG26_B460800 (0x000300 | 0x08) +#define MAX3107_BRG26_B921600 (0x000100 | 0x0C) + +/* Baud rate generator configuration values for internal clock */ +#define MAX3107_BRG13_IB300 (0x008000 | 0x00) +#define MAX3107_BRG13_IB600 (0x004000 | 0x00) +#define MAX3107_BRG13_IB1200 (0x002000 | 0x00) +#define MAX3107_BRG13_IB2400 (0x001000 | 0x00) +#define MAX3107_BRG13_IB4800 (0x000800 | 0x00) +#define MAX3107_BRG13_IB9600 (0x000400 | 0x00) +#define MAX3107_BRG13_IB19200 (0x000200 | 0x00) +#define MAX3107_BRG13_IB38400 (0x000100 | 0x00) +#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B) +#define MAX3107_BRG13_IB115200 (0x000000 | 0x05) +#define MAX3107_BRG13_IB230400 (0x000000 | 0x03) +#define MAX3107_BRG13_IB460800 (0x000000 | 0x00) +#define MAX3107_BRG13_IB921600 (0x000000 | 0x00) + + +struct baud_table { + int baud; + u32 new_brg; +}; + +struct max3107_port { + /* UART port structure */ + struct uart_port port; + + /* SPI device structure */ + struct spi_device *spi; + +#if defined(CONFIG_GPIOLIB) + /* GPIO chip stucture */ + struct gpio_chip chip; +#endif + + /* Workqueue that does all the magic */ + struct workqueue_struct *workqueue; + struct work_struct work; + + /* Lock for shared data */ + spinlock_t data_lock; + + /* Device configuration */ + int ext_clk; /* 1 if external clock used */ + int loopback; /* Current loopback mode state */ + int baud; /* Current baud rate */ + + /* State flags */ + int suspended; /* Indicates suspend mode */ + int tx_fifo_empty; /* Flag for TX FIFO state */ + int rx_enabled; /* Flag for receiver state */ + int tx_enabled; /* Flag for transmitter state */ + + u16 irqen_reg; /* Current IRQ enable register value */ + /* Shared data */ + u16 mode1_reg; /* Current mode1 register value*/ + int mode1_commit; /* Flag for setting new mode1 register value */ + u16 lcr_reg; /* Current LCR register value */ + int lcr_commit; /* Flag for setting new LCR register value */ + u32 brg_cfg; /* Current Baud rate generator config */ + int brg_commit; /* Flag for setting new baud rate generator + * config + */ + struct baud_table *baud_tbl; + int handle_irq; /* Indicates that IRQ should be handled */ + + /* Rx buffer and str*/ + u16 *rxbuf; + u8 *rxstr; + /* Tx buffer*/ + u16 *txbuf; + + struct max3107_plat *pdata; /* Platform data */ +}; + +/* Platform data structure */ +struct max3107_plat { + /* Loopback mode enable */ + int loopback; + /* External clock enable */ + int ext_clk; + /* Called during the register initialisation */ + void (*init)(struct max3107_port *s); + /* Called when the port is found and configured */ + int (*configure)(struct max3107_port *s); + /* HW suspend function */ + void (*hw_suspend) (struct max3107_port *s, int suspend); + /* Polling mode enable */ + int polled_mode; + /* Polling period if polling mode enabled */ + int poll_time; +}; + +extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len); +extern void max3107_hw_susp(struct max3107_port *s, int suspend); +extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata); +extern int max3107_remove(struct spi_device *spi); +extern int max3107_suspend(struct spi_device *spi, pm_message_t state); +extern int max3107_resume(struct spi_device *spi); + +#endif /* _LINUX_SERIAL_MAX3107_H */ diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c index b5aaef9..3394b7c 100644 --- a/drivers/serial/mcf.c +++ b/drivers/serial/mcf.c @@ -70,16 +70,14 @@ static unsigned int mcf_tx_empty(struct uart_port *port) static unsigned int mcf_get_mctrl(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; unsigned int sigs; - spin_lock_irqsave(&port->lock, flags); sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS; sigs |= (pp->sigs & TIOCM_RTS); sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0); sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0); - spin_unlock_irqrestore(&port->lock, flags); + return sigs; } @@ -88,16 +86,13 @@ static unsigned int mcf_get_mctrl(struct uart_port *port) static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); pp->sigs = sigs; mcf_setppdtr(port->line, (sigs & TIOCM_DTR)); if (sigs & TIOCM_RTS) writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); else writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0); - spin_unlock_irqrestore(&port->lock, flags); } /****************************************************************************/ @@ -105,12 +100,9 @@ static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) static void mcf_start_tx(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); pp->imr |= MCFUART_UIR_TXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); - spin_unlock_irqrestore(&port->lock, flags); } /****************************************************************************/ @@ -118,12 +110,9 @@ static void mcf_start_tx(struct uart_port *port) static void mcf_stop_tx(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); pp->imr &= ~MCFUART_UIR_TXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); - spin_unlock_irqrestore(&port->lock, flags); } /****************************************************************************/ @@ -131,12 +120,9 @@ static void mcf_stop_tx(struct uart_port *port) static void mcf_stop_rx(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); pp->imr &= ~MCFUART_UIR_RXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); - spin_unlock_irqrestore(&port->lock, flags); } /****************************************************************************/ @@ -366,13 +352,22 @@ static irqreturn_t mcf_interrupt(int irq, void *data) struct uart_port *port = data; struct mcf_uart *pp = container_of(port, struct mcf_uart, port); unsigned int isr; + irqreturn_t ret = IRQ_NONE; isr = readb(port->membase + MCFUART_UISR) & pp->imr; - if (isr & MCFUART_UIR_RXREADY) + + spin_lock(&port->lock); + if (isr & MCFUART_UIR_RXREADY) { mcf_rx_chars(pp); - if (isr & MCFUART_UIR_TXREADY) + ret = IRQ_HANDLED; + } + if (isr & MCFUART_UIR_TXREADY) { mcf_tx_chars(pp); - return IRQ_HANDLED; + ret = IRQ_HANDLED; + } + spin_unlock(&port->lock); + + return ret; } /****************************************************************************/ diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c new file mode 100644 index 0000000..bc9af50 --- /dev/null +++ b/drivers/serial/mfd.c @@ -0,0 +1,1498 @@ +/* + * mfd.c: driver for High Speed UART device of Intel Medfield platform + * + * Refer pxa.c, 8250.c and some other drivers in drivers/serial/ + * + * (C) Copyright 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +/* Notes: + * 1. DMA channel allocation: 0/1 channel are assigned to port 0, + * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans + * are used for RX, odd chans for TX + * + * 2. In A0 stepping, UART will not support TX half empty flag + * + * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always + * asserted, only when the HW is reset the DDCD and DDSR will + * be triggered + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/serial_reg.h> +#include <linux/circ_buf.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_core.h> +#include <linux/serial_mfd.h> +#include <linux/dma-mapping.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/debugfs.h> + +#define MFD_HSU_A0_STEPPING 1 + +#define HSU_DMA_BUF_SIZE 2048 + +#define chan_readl(chan, offset) readl(chan->reg + offset) +#define chan_writel(chan, offset, val) writel(val, chan->reg + offset) + +#define mfd_readl(obj, offset) readl(obj->reg + offset) +#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) + +#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10) + +struct hsu_dma_buffer { + u8 *buf; + dma_addr_t dma_addr; + u32 dma_size; + u32 ofs; +}; + +struct hsu_dma_chan { + u32 id; + enum dma_data_direction dirt; + struct uart_hsu_port *uport; + void __iomem *reg; + struct timer_list rx_timer; /* only needed by RX channel */ +}; + +struct uart_hsu_port { + struct uart_port port; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned int lsr_break_flag; + char name[12]; + int index; + struct device *dev; + + struct hsu_dma_chan *txc; + struct hsu_dma_chan *rxc; + struct hsu_dma_buffer txbuf; + struct hsu_dma_buffer rxbuf; + int use_dma; /* flag for DMA/PIO */ + int running; + int dma_tx_on; +}; + +/* Top level data structure of HSU */ +struct hsu_port { + void __iomem *reg; + unsigned long paddr; + unsigned long iolen; + u32 irq; + + struct uart_hsu_port port[3]; + struct hsu_dma_chan chans[10]; + + struct dentry *debugfs; +}; + +static inline unsigned int serial_in(struct uart_hsu_port *up, int offset) +{ + unsigned int val; + + if (offset > UART_MSR) { + offset <<= 2; + val = readl(up->port.membase + offset); + } else + val = (unsigned int)readb(up->port.membase + offset); + + return val; +} + +static inline void serial_out(struct uart_hsu_port *up, int offset, int value) +{ + if (offset > UART_MSR) { + offset <<= 2; + writel(value, up->port.membase + offset); + } else { + unsigned char val = value & 0xff; + writeb(val, up->port.membase + offset); + } +} + +#ifdef CONFIG_DEBUG_FS + +#define HSU_REGS_BUFSIZE 1024 + +static int hsu_show_regs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static ssize_t port_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct uart_hsu_port *up = file->private_data; + char *buf; + u32 len = 0; + ssize_t ret; + + buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MFD HSU port[%d] regs:\n", up->index); + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "IER: \t\t0x%08x\n", serial_in(up, UART_IER)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "IIR: \t\t0x%08x\n", serial_in(up, UART_IIR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "LCR: \t\t0x%08x\n", serial_in(up, UART_LCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MCR: \t\t0x%08x\n", serial_in(up, UART_MCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "LSR: \t\t0x%08x\n", serial_in(up, UART_LSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MSR: \t\t0x%08x\n", serial_in(up, UART_MSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "FOR: \t\t0x%08x\n", serial_in(up, UART_FOR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "PS: \t\t0x%08x\n", serial_in(up, UART_PS)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MUL: \t\t0x%08x\n", serial_in(up, UART_MUL)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "DIV: \t\t0x%08x\n", serial_in(up, UART_DIV)); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static ssize_t dma_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct hsu_dma_chan *chan = file->private_data; + char *buf; + u32 len = 0; + ssize_t ret; + + buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MFD HSU DMA channel [%d] regs:\n", chan->id); + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR)); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static const struct file_operations port_regs_ops = { + .owner = THIS_MODULE, + .open = hsu_show_regs_open, + .read = port_show_regs, +}; + +static const struct file_operations dma_regs_ops = { + .owner = THIS_MODULE, + .open = hsu_show_regs_open, + .read = dma_show_regs, +}; + +static int hsu_debugfs_init(struct hsu_port *hsu) +{ + int i; + char name[32]; + + hsu->debugfs = debugfs_create_dir("hsu", NULL); + if (!hsu->debugfs) + return -ENOMEM; + + for (i = 0; i < 3; i++) { + snprintf(name, sizeof(name), "port_%d_regs", i); + debugfs_create_file(name, S_IFREG | S_IRUGO, + hsu->debugfs, (void *)(&hsu->port[i]), &port_regs_ops); + } + + for (i = 0; i < 6; i++) { + snprintf(name, sizeof(name), "dma_chan_%d_regs", i); + debugfs_create_file(name, S_IFREG | S_IRUGO, + hsu->debugfs, (void *)&hsu->chans[i], &dma_regs_ops); + } + + return 0; +} + +static void hsu_debugfs_remove(struct hsu_port *hsu) +{ + if (hsu->debugfs) + debugfs_remove_recursive(hsu->debugfs); +} + +#else +static inline int hsu_debugfs_init(struct hsu_port *hsu) +{ + return 0; +} + +static inline void hsu_debugfs_remove(struct hsu_port *hsu) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void serial_hsu_enable_ms(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +void hsu_dma_tx(struct uart_hsu_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + struct hsu_dma_buffer *dbuf = &up->txbuf; + int count; + + /* test_and_set_bit may be better, but anyway it's in lock protected mode */ + if (up->dma_tx_on) + return; + + /* Update the circ buf info */ + xmit->tail += dbuf->ofs; + xmit->tail &= UART_XMIT_SIZE - 1; + + up->port.icount.tx += dbuf->ofs; + dbuf->ofs = 0; + + /* Disable the channel */ + chan_writel(up->txc, HSU_CH_CR, 0x0); + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(&up->port)) { + dma_sync_single_for_device(up->port.dev, + dbuf->dma_addr, + dbuf->dma_size, + DMA_TO_DEVICE); + + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + dbuf->ofs = count; + + /* Reprogram the channel */ + chan_writel(up->txc, HSU_CH_D0SAR, dbuf->dma_addr + xmit->tail); + chan_writel(up->txc, HSU_CH_D0TSR, count); + + /* Reenable the channel */ + chan_writel(up->txc, HSU_CH_DCR, 0x1 + | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24)); + up->dma_tx_on = 1; + chan_writel(up->txc, HSU_CH_CR, 0x1); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); +} + +/* The buffer is already cache coherent */ +void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf) +{ + dbuf->ofs = 0; + + chan_writel(rxc, HSU_CH_BSR, 32); + chan_writel(rxc, HSU_CH_MOTSR, 4); + + chan_writel(rxc, HSU_CH_D0SAR, dbuf->dma_addr); + chan_writel(rxc, HSU_CH_D0TSR, dbuf->dma_size); + chan_writel(rxc, HSU_CH_DCR, 0x1 | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ + ); + chan_writel(rxc, HSU_CH_CR, 0x3); + + mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); +} + +/* Protected by spin_lock_irqsave(port->lock) */ +static void serial_hsu_start_tx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + if (up->use_dma) { + hsu_dma_tx(up); + } else if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_hsu_stop_tx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct hsu_dma_chan *txc = up->txc; + + if (up->use_dma) + chan_writel(txc, HSU_CH_CR, 0x0); + else if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +/* This is always called in spinlock protected mode, so + * modify timeout timer is safe here */ +void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) +{ + struct hsu_dma_buffer *dbuf = &up->rxbuf; + struct hsu_dma_chan *chan = up->rxc; + struct uart_port *port = &up->port; + struct tty_struct *tty = port->state->port.tty; + int count; + + if (!tty) + return; + + /* + * First need to know how many is already transferred, + * then check if its a timeout DMA irq, and return + * the trail bytes out, push them up and reenable the + * channel + */ + + /* Timeout IRQ, need wait some time, see Errata 2 */ + if (int_sts & 0xf00) + udelay(2); + + /* Stop the channel */ + chan_writel(chan, HSU_CH_CR, 0x0); + + count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; + if (!count) { + /* Restart the channel before we leave */ + chan_writel(chan, HSU_CH_CR, 0x3); + return; + } + del_timer(&chan->rx_timer); + + dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, + dbuf->dma_size, DMA_FROM_DEVICE); + + /* + * Head will only wrap around when we recycle + * the DMA buffer, and when that happens, we + * explicitly set tail to 0. So head will + * always be greater than tail. + */ + tty_insert_flip_string(tty, dbuf->buf, count); + port->icount.rx += count; + + dma_sync_single_for_device(up->port.dev, dbuf->dma_addr, + dbuf->dma_size, DMA_FROM_DEVICE); + + /* Reprogram the channel */ + chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr); + chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size); + chan_writel(chan, HSU_CH_DCR, 0x1 + | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ + ); + tty_flip_buffer_push(tty); + + chan_writel(chan, HSU_CH_CR, 0x3); + chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ; + add_timer(&chan->rx_timer); + +} + +static void serial_hsu_stop_rx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct hsu_dma_chan *chan = up->rxc; + + if (up->use_dma) + chan_writel(chan, HSU_CH_CR, 0x2); + else { + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); + } +} + +static inline void receive_chars(struct uart_hsu_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned int ch, flag; + unsigned int max_count = 256; + + if (!tty) + return; + + do { + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + + dev_warn(up->dev, "We really rush into ERR/BI case" + "status = 0x%02x", *status); + /* For statistics only */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* Mask off conditions which should be ignored. */ + *status &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + if (up->port.cons && + up->port.cons->index == up->port.line) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && max_count--); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_hsu_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_hsu_stop_tx(&up->port); + return; + } + +#ifndef MFD_HSU_A0_STEPPING + count = up->port.fifosize / 2; +#else + /* + * A0 only supports fully empty IRQ, and the first char written + * into it won't clear the EMPT bit, so we may need be cautious + * by useing a shorter buffer + */ + count = up->port.fifosize - 4; +#endif + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_hsu_stop_tx(&up->port); +} + +static inline void check_modem_status(struct uart_hsu_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + /* We may only get DDCD when HW init and reset */ + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + /* Will start/stop_tx accordingly */ + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +/* + * This handles the interrupt from one port. + */ +static irqreturn_t port_irq(int irq, void *dev_id) +{ + struct uart_hsu_port *up = dev_id; + unsigned int iir, lsr; + unsigned long flags; + + if (unlikely(!up->running)) + return IRQ_NONE; + + spin_lock_irqsave(&up->port.lock, flags); + if (up->use_dma) { + lsr = serial_in(up, UART_LSR); + if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) + dev_warn(up->dev, + "Got lsr irq while using DMA, lsr = 0x%2x\n", + lsr); + check_modem_status(up); + spin_unlock_irqrestore(&up->port.lock, flags); + return IRQ_HANDLED; + } + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) { + spin_unlock_irqrestore(&up->port.lock, flags); + return IRQ_NONE; + } + + lsr = serial_in(up, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr); + check_modem_status(up); + + /* lsr will be renewed during the receive_chars */ + if (lsr & UART_LSR_THRE) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + return IRQ_HANDLED; +} + +static inline void dma_chan_irq(struct hsu_dma_chan *chan) +{ + struct uart_hsu_port *up = chan->uport; + unsigned long flags; + u32 int_sts; + + spin_lock_irqsave(&up->port.lock, flags); + + if (!up->use_dma || !up->running) + goto exit; + + /* + * No matter what situation, need read clear the IRQ status + * There is a bug, see Errata 5, HSD 2900918 + */ + int_sts = chan_readl(chan, HSU_CH_SR); + + /* Rx channel */ + if (chan->dirt == DMA_FROM_DEVICE) + hsu_dma_rx(up, int_sts); + + /* Tx channel */ + if (chan->dirt == DMA_TO_DEVICE) { + chan_writel(chan, HSU_CH_CR, 0x0); + up->dma_tx_on = 0; + hsu_dma_tx(up); + } + +exit: + spin_unlock_irqrestore(&up->port.lock, flags); + return; +} + +static irqreturn_t dma_irq(int irq, void *dev_id) +{ + struct hsu_port *hsu = dev_id; + u32 int_sts, i; + + int_sts = mfd_readl(hsu, HSU_GBL_DMAISR); + + /* Currently we only have 6 channels may be used */ + for (i = 0; i < 6; i++) { + if (int_sts & 0x1) + dma_chan_irq(&hsu->chans[i]); + int_sts >>= 1; + } + + return IRQ_HANDLED; +} + +static unsigned int serial_hsu_tx_empty(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_hsu_get_mctrl(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned char status; + unsigned int ret; + + status = serial_in(up, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_hsu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial_hsu_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * What special to do: + * 1. chose the 64B fifo mode + * 2. make sure not to select half empty mode for A0 stepping + * 3. start dma or pio depends on configuration + * 4. we only allocate dma memory when needed + */ +static int serial_hsu_startup(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); + + /* Clear the interrupt registers. */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* Now, initialize the UART, default is 8n1 */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.mctrl |= TIOCM_OUT2; + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + if (!up->use_dma) + up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE; + else + up->ier = 0; + serial_out(up, UART_IER, up->ier); + + spin_unlock_irqrestore(&up->port.lock, flags); + + /* DMA init */ + if (up->use_dma) { + struct hsu_dma_buffer *dbuf; + struct circ_buf *xmit = &port->state->xmit; + + up->dma_tx_on = 0; + + /* First allocate the RX buffer */ + dbuf = &up->rxbuf; + dbuf->buf = kzalloc(HSU_DMA_BUF_SIZE, GFP_KERNEL); + if (!dbuf->buf) { + up->use_dma = 0; + goto exit; + } + dbuf->dma_addr = dma_map_single(port->dev, + dbuf->buf, + HSU_DMA_BUF_SIZE, + DMA_FROM_DEVICE); + dbuf->dma_size = HSU_DMA_BUF_SIZE; + + /* Start the RX channel right now */ + hsu_dma_start_rx_chan(up->rxc, dbuf); + + /* Next init the TX DMA */ + dbuf = &up->txbuf; + dbuf->buf = xmit->buf; + dbuf->dma_addr = dma_map_single(port->dev, + dbuf->buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + dbuf->dma_size = UART_XMIT_SIZE; + + /* This should not be changed all around */ + chan_writel(up->txc, HSU_CH_BSR, 32); + chan_writel(up->txc, HSU_CH_MOTSR, 4); + dbuf->ofs = 0; + } + +exit: + /* And clear the interrupt registers again for luck. */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + up->running = 1; + return 0; +} + +static void serial_hsu_shutdown(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + del_timer_sync(&up->rxc->rx_timer); + + /* Disable interrupts from this port */ + up->ier = 0; + serial_out(up, UART_IER, 0); + up->running = 0; + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Disable break condition and FIFOs */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +static void +serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct tty_struct *tty = port->state->port.tty; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + u32 mul = 0x3600; + u32 ps = 0x10; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + /* CMSPAR isn't supported by this driver */ + if (tty) + tty->termios->c_cflag &= ~CMSPAR; + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * For those basic low baud rate we can get the direct + * scalar from 2746800, like 115200 = 2746800/24, for those + * higher baud rate, we have to handle them case by case, + * but DIV reg is never touched as its default value 0x3d09 + */ + baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + quot = uart_get_divisor(port, baud); + + switch (baud) { + case 3500000: + mul = 0x3345; + ps = 0xC; + quot = 1; + break; + case 2500000: + mul = 0x2710; + ps = 0x10; + quot = 1; + break; + case 18432000: + mul = 0x2400; + ps = 0x10; + quot = 1; + break; + case 1500000: + mul = 0x1D4C; + ps = 0xc; + quot = 1; + break; + default: + ; + } + + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B; + else if ((up->port.uartclk / quot) < (230400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_16B; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B; + + fcr |= UART_FCR_HSU_64B_FIFO; +#ifdef MFD_HSU_A0_STEPPING + /* A0 doesn't support half empty IRQ */ + fcr |= UART_FCR_FULL_EMPT_TXI; +#endif + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* Update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* Characters to ignore */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* Ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts, disable + * MSI by default + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE | UART_MCR_RTS; + else + up->mcr &= ~UART_MCR_AFE; + + serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_LCR, cval); /* reset DLAB */ + serial_out(up, UART_MUL, mul); /* set MUL */ + serial_out(up, UART_PS, ps); /* set PS */ + up->lcr = cval; /* Save LCR */ + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + serial_out(up, UART_FCR, fcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_hsu_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ +} + +static void serial_hsu_release_port(struct uart_port *port) +{ +} + +static int serial_hsu_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_hsu_config_port(struct uart_port *port, int flags) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + up->port.type = PORT_MFD; +} + +static int +serial_hsu_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* We don't want the core code to modify any port params */ + return -EINVAL; +} + +static const char * +serial_hsu_type(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + return up->name; +} + +/* Mainly for uart console use */ +static struct uart_hsu_port *serial_hsu_ports[3]; +static struct uart_driver serial_hsu_reg; + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* Wait for transmitter & holding register to empty */ +static inline void wait_for_xmitr(struct uart_hsu_port *up) +{ + unsigned int status, tmout = 1000; + + /* Wait up to 1ms for the character to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while (!(status & BOTH_EMPTY)); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +static void serial_hsu_console_putchar(struct uart_port *port, int ch) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_hsu_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_hsu_port *up = serial_hsu_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + /* First save the IER then disable the interrupts */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial_hsu_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static struct console serial_hsu_console; + +static int __init +serial_hsu_console_setup(struct console *co, char *options) +{ + struct uart_hsu_port *up; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (co->index == -1 || co->index >= serial_hsu_reg.nr) + co->index = 0; + up = serial_hsu_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + ret = uart_set_options(&up->port, co, baud, parity, bits, flow); + + return ret; +} + +static struct console serial_hsu_console = { + .name = "ttyMFD", + .write = serial_hsu_console_write, + .device = uart_console_device, + .setup = serial_hsu_console_setup, + .flags = CON_PRINTBUFFER, + .index = 2, + .data = &serial_hsu_reg, +}; +#endif + +struct uart_ops serial_hsu_pops = { + .tx_empty = serial_hsu_tx_empty, + .set_mctrl = serial_hsu_set_mctrl, + .get_mctrl = serial_hsu_get_mctrl, + .stop_tx = serial_hsu_stop_tx, + .start_tx = serial_hsu_start_tx, + .stop_rx = serial_hsu_stop_rx, + .enable_ms = serial_hsu_enable_ms, + .break_ctl = serial_hsu_break_ctl, + .startup = serial_hsu_startup, + .shutdown = serial_hsu_shutdown, + .set_termios = serial_hsu_set_termios, + .pm = serial_hsu_pm, + .type = serial_hsu_type, + .release_port = serial_hsu_release_port, + .request_port = serial_hsu_request_port, + .config_port = serial_hsu_config_port, + .verify_port = serial_hsu_verify_port, +}; + +static struct uart_driver serial_hsu_reg = { + .owner = THIS_MODULE, + .driver_name = "MFD serial", + .dev_name = "ttyMFD", + .major = TTY_MAJOR, + .minor = 128, + .nr = 3, +}; + +#ifdef CONFIG_PM +static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state) +{ + void *priv = pci_get_drvdata(pdev); + struct uart_hsu_port *up; + + /* Make sure this is not the internal dma controller */ + if (priv && (pdev->device != 0x081E)) { + up = priv; + uart_suspend_port(&serial_hsu_reg, &up->port); + } + + pci_save_state(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; +} + +static int serial_hsu_resume(struct pci_dev *pdev) +{ + void *priv = pci_get_drvdata(pdev); + struct uart_hsu_port *up; + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + ret = pci_enable_device(pdev); + if (ret) + dev_warn(&pdev->dev, + "HSU: can't re-enable device, try to continue\n"); + + if (priv && (pdev->device != 0x081E)) { + up = priv; + uart_resume_port(&serial_hsu_reg, &up->port); + } + return 0; +} +#else +#define serial_hsu_suspend NULL +#define serial_hsu_resume NULL +#endif + +/* temp global pointer before we settle down on using one or four PCI dev */ +static struct hsu_port *phsu; + +static int serial_hsu_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct uart_hsu_port *uport; + int index, ret; + + printk(KERN_INFO "HSU: found PCI Serial controller(ID: %04x:%04x)\n", + pdev->vendor, pdev->device); + + switch (pdev->device) { + case 0x081B: + index = 0; + break; + case 0x081C: + index = 1; + break; + case 0x081D: + index = 2; + break; + case 0x081E: + /* internal DMA controller */ + index = 3; + break; + default: + dev_err(&pdev->dev, "HSU: out of index!"); + return -ENODEV; + } + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + if (index == 3) { + /* DMA controller */ + ret = request_irq(pdev->irq, dma_irq, 0, "hsu_dma", phsu); + if (ret) { + dev_err(&pdev->dev, "can not get IRQ\n"); + goto err_disable; + } + pci_set_drvdata(pdev, phsu); + } else { + /* UART port 0~2 */ + uport = &phsu->port[index]; + uport->port.irq = pdev->irq; + uport->port.dev = &pdev->dev; + uport->dev = &pdev->dev; + + ret = request_irq(pdev->irq, port_irq, 0, uport->name, uport); + if (ret) { + dev_err(&pdev->dev, "can not get IRQ\n"); + goto err_disable; + } + uart_add_one_port(&serial_hsu_reg, &uport->port); + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + if (index == 2) { + register_console(&serial_hsu_console); + uport->port.cons = &serial_hsu_console; + } +#endif + pci_set_drvdata(pdev, uport); + } + + return 0; + +err_disable: + pci_disable_device(pdev); + return ret; +} + +static void hsu_dma_rx_timeout(unsigned long data) +{ + struct hsu_dma_chan *chan = (void *)data; + struct uart_hsu_port *up = chan->uport; + struct hsu_dma_buffer *dbuf = &up->rxbuf; + int count = 0; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; + + if (!count) { + mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); + goto exit; + } + + hsu_dma_rx(up, 0); +exit: + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void hsu_global_init(void) +{ + struct hsu_port *hsu; + struct uart_hsu_port *uport; + struct hsu_dma_chan *dchan; + int i, ret; + + hsu = kzalloc(sizeof(struct hsu_port), GFP_KERNEL); + if (!hsu) + return; + + /* Get basic io resource and map it */ + hsu->paddr = 0xffa28000; + hsu->iolen = 0x1000; + + if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global"))) + pr_warning("HSU: error in request mem region\n"); + + hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen); + if (!hsu->reg) { + pr_err("HSU: error in ioremap\n"); + ret = -ENOMEM; + goto err_free_region; + } + + /* Initialise the 3 UART ports */ + uport = hsu->port; + for (i = 0; i < 3; i++) { + uport->port.type = PORT_MFD; + uport->port.iotype = UPIO_MEM; + uport->port.mapbase = (resource_size_t)hsu->paddr + + HSU_PORT_REG_OFFSET + + i * HSU_PORT_REG_LENGTH; + uport->port.membase = hsu->reg + HSU_PORT_REG_OFFSET + + i * HSU_PORT_REG_LENGTH; + + sprintf(uport->name, "hsu_port%d", i); + uport->port.fifosize = 64; + uport->port.ops = &serial_hsu_pops; + uport->port.line = i; + uport->port.flags = UPF_IOREMAP; + /* set the scalable maxim support rate to 2746800 bps */ + uport->port.uartclk = 115200 * 24 * 16; + + uport->running = 0; + uport->txc = &hsu->chans[i * 2]; + uport->rxc = &hsu->chans[i * 2 + 1]; + + serial_hsu_ports[i] = uport; + uport->index = i; + uport++; + } + + /* Initialise 6 dma channels */ + dchan = hsu->chans; + for (i = 0; i < 6; i++) { + dchan->id = i; + dchan->dirt = (i & 0x1) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + dchan->uport = &hsu->port[i/2]; + dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET + + i * HSU_DMA_CHANS_REG_LENGTH; + + /* Work around for RX */ + if (dchan->dirt == DMA_FROM_DEVICE) { + init_timer(&dchan->rx_timer); + dchan->rx_timer.function = hsu_dma_rx_timeout; + dchan->rx_timer.data = (unsigned long)dchan; + } + dchan++; + } + + phsu = hsu; + + hsu_debugfs_init(hsu); + return; + +err_free_region: + release_mem_region(hsu->paddr, hsu->iolen); + kfree(hsu); + return; +} + +static void serial_hsu_remove(struct pci_dev *pdev) +{ + struct hsu_port *hsu; + int i; + + hsu = pci_get_drvdata(pdev); + if (!hsu) + return; + + for (i = 0; i < 3; i++) + uart_remove_one_port(&serial_hsu_reg, &hsu->port[i].port); + + pci_set_drvdata(pdev, NULL); + free_irq(hsu->irq, hsu); + pci_disable_device(pdev); +} + +/* First 3 are UART ports, and the 4th is the DMA */ +static const struct pci_device_id pci_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081E) }, + {}, +}; + +static struct pci_driver hsu_pci_driver = { + .name = "HSU serial", + .id_table = pci_ids, + .probe = serial_hsu_probe, + .remove = __devexit_p(serial_hsu_remove), + .suspend = serial_hsu_suspend, + .resume = serial_hsu_resume, +}; + +static int __init hsu_pci_init(void) +{ + int ret; + + hsu_global_init(); + + ret = uart_register_driver(&serial_hsu_reg); + if (ret) + return ret; + + return pci_register_driver(&hsu_pci_driver); +} + +static void __exit hsu_pci_exit(void) +{ + pci_unregister_driver(&hsu_pci_driver); + uart_unregister_driver(&serial_hsu_reg); + + hsu_debugfs_remove(phsu); + + kfree(phsu); +} + +module_init(hsu_pci_init); +module_exit(hsu_pci_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:medfield-hsu"); diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c new file mode 100644 index 0000000..f6ad1ec --- /dev/null +++ b/drivers/serial/mrst_max3110.c @@ -0,0 +1,844 @@ +/* + * max3110.c - spi uart protocol driver for Maxim 3110 on Moorestown + * + * Copyright (C) Intel 2008 Feng Tang <feng.tang@intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +/* + * Note: + * 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has + * 1 word. If SPI master controller doesn't support sclk frequency change, + * then the char need be sent out one by one with some delay + * + * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE + * interrupt for a low speed UART device + */ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/platform_device.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_core.h> +#include <linux/serial_reg.h> + +#include <linux/kthread.h> +#include <linux/delay.h> +#include <asm/atomic.h> +#include <linux/spi/spi.h> +#include <linux/spi/dw_spi.h> + +#include "mrst_max3110.h" + +#define PR_FMT "mrst_max3110: " + +#define UART_TX_NEEDED 1 +#define CON_TX_NEEDED 2 +#define BIT_IRQ_PENDING 3 + +struct uart_max3110 { + struct uart_port port; + struct spi_device *spi; + char *name; + + wait_queue_head_t wq; + struct task_struct *main_thread; + struct task_struct *read_thread; + struct mutex thread_mutex;; + + u32 baud; + u16 cur_conf; + u8 clock; + u8 parity, word_7bits; + + unsigned long uart_flags; + + /* console related */ + struct circ_buf con_xmit; + + /* irq related */ + u16 irq; +}; + +/* global data structure, may need be removed */ +struct uart_max3110 *pmax; +static inline void receive_char(struct uart_max3110 *max, u8 ch); +static void receive_chars(struct uart_max3110 *max, + unsigned char *str, int len); +static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf); +static void max3110_console_receive(struct uart_max3110 *max); + +int max3110_write_then_read(struct uart_max3110 *max, + const u8 *txbuf, u8 *rxbuf, unsigned len, int always_fast) +{ + struct spi_device *spi = max->spi; + struct spi_message message; + struct spi_transfer x; + int ret; + + if (!txbuf || !rxbuf) + return -EINVAL; + + spi_message_init(&message); + memset(&x, 0, sizeof x); + x.len = len; + x.tx_buf = txbuf; + x.rx_buf = rxbuf; + spi_message_add_tail(&x, &message); + + if (always_fast) + x.speed_hz = 3125000; + else if (max->baud) + x.speed_hz = max->baud; + + /* Do the i/o */ + ret = spi_sync(spi, &message); + return ret; +} + +/* Write a u16 to the device, and return one u16 read back */ +int max3110_out(struct uart_max3110 *max, const u16 out) +{ + u16 tmp; + int ret; + + ret = max3110_write_then_read(max, (u8 *)&out, (u8 *)&tmp, 2, 1); + if (ret) + return ret; + + /* If some valid data is read back */ + if (tmp & MAX3110_READ_DATA_AVAILABLE) + receive_char(max, (tmp & 0xff)); + + return ret; +} + +#define MAX_READ_LEN 20 +/* + * This is usually used to read data from SPIC RX FIFO, which doesn't + * need any delay like flushing character out. It returns how many + * valide bytes are read back + */ +static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf) +{ + u16 out[MAX_READ_LEN], in[MAX_READ_LEN]; + u8 *pbuf, valid_str[MAX_READ_LEN]; + int i, j, bytelen; + + if (len > MAX_READ_LEN) { + pr_err(PR_FMT "read len %d is too large\n", len); + return 0; + } + + bytelen = len * 2; + memset(out, 0, bytelen); + memset(in, 0, bytelen); + + if (max3110_write_then_read(max, (u8 *)out, (u8 *)in, bytelen, 1)) + return 0; + + /* If caller don't provide a buffer, then handle received char */ + pbuf = buf ? buf : valid_str; + + for (i = 0, j = 0; i < len; i++) { + if (in[i] & MAX3110_READ_DATA_AVAILABLE) + pbuf[j++] = (u8)(in[i] & 0xff); + } + + if (j && (pbuf == valid_str)) + receive_chars(max, valid_str, j); + + return j; +} + +static void serial_m3110_con_putchar(struct uart_port *port, int ch) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + struct circ_buf *xmit = &max->con_xmit; + + if (uart_circ_chars_free(xmit)) { + xmit->buf[xmit->head] = (char)ch; + xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1); + } + + + if (!test_and_set_bit(CON_TX_NEEDED, &max->uart_flags)) + wake_up_process(max->main_thread); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void serial_m3110_con_write(struct console *co, + const char *s, unsigned int count) +{ + if (!pmax) + return; + + uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar); +} + +static int __init +serial_m3110_con_setup(struct console *co, char *options) +{ + struct uart_max3110 *max = pmax; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_info(PR_FMT "setting up console\n"); + + if (!max) { + pr_err(PR_FMT "pmax is NULL, return"); + return -ENODEV; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&max->port, co, baud, parity, bits, flow); +} + +static struct tty_driver *serial_m3110_con_device(struct console *co, + int *index) +{ + struct uart_driver *p = co->data; + *index = co->index; + return p->tty_driver; +} + +static struct uart_driver serial_m3110_reg; +static struct console serial_m3110_console = { + .name = "ttyS", + .write = serial_m3110_con_write, + .device = serial_m3110_con_device, + .setup = serial_m3110_con_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_m3110_reg, +}; + +#define MRST_CONSOLE (&serial_m3110_console) + +static unsigned int serial_m3110_tx_empty(struct uart_port *port) +{ + return 1; +} + +static void serial_m3110_stop_tx(struct uart_port *port) +{ + return; +} + +/* stop_rx will be called in spin_lock env */ +static void serial_m3110_stop_rx(struct uart_port *port) +{ + return; +} + +#define WORDS_PER_XFER 128 +static inline void send_circ_buf(struct uart_max3110 *max, + struct circ_buf *xmit) +{ + int len, left = 0; + u16 obuf[WORDS_PER_XFER], ibuf[WORDS_PER_XFER]; + u8 valid_str[WORDS_PER_XFER]; + int i, j; + + while (!uart_circ_empty(xmit)) { + left = uart_circ_chars_pending(xmit); + while (left) { + len = (left >= WORDS_PER_XFER) ? WORDS_PER_XFER : left; + + memset(obuf, 0, len * 2); + memset(ibuf, 0, len * 2); + for (i = 0; i < len; i++) { + obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + } + max3110_write_then_read(max, (u8 *)obuf, + (u8 *)ibuf, len * 2, 0); + + for (i = 0, j = 0; i < len; i++) { + if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE) + valid_str[j++] = (u8)(ibuf[i] & 0xff); + } + + if (j) + receive_chars(max, valid_str, j); + + max->port.icount.tx += len; + left -= len; + } + } +} + +static void transmit_char(struct uart_max3110 *max) +{ + struct uart_port *port = &max->port; + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + send_circ_buf(max, xmit); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + serial_m3110_stop_tx(port); +} + +/* This will be called by uart_write() and tty_write, can't + * go to sleep */ +static void serial_m3110_start_tx(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + + if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags)) + wake_up_process(max->main_thread); +} + +static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len) +{ + struct uart_port *port = &max->port; + struct tty_struct *tty; + int usable; + + /* If uart is not opened, just return */ + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; /* receive some char before the tty is opened */ + + while (len) { + usable = tty_buffer_request_room(tty, len); + if (usable) { + tty_insert_flip_string(tty, str, usable); + str += usable; + port->icount.rx += usable; + tty_flip_buffer_push(tty); + } + len -= usable; + } +} + +static inline void receive_char(struct uart_max3110 *max, u8 ch) +{ + receive_chars(max, &ch, 1); +} + +static void max3110_console_receive(struct uart_max3110 *max) +{ + int loop = 1, num, total = 0; + u8 recv_buf[512], *pbuf; + + pbuf = recv_buf; + do { + num = max3110_read_multi(max, 8, pbuf); + + if (num) { + loop = 10; + pbuf += num; + total += num; + + if (total >= 500) { + receive_chars(max, recv_buf, total); + pbuf = recv_buf; + total = 0; + } + } + } while (--loop); + + if (total) + receive_chars(max, recv_buf, total); +} + +static int max3110_main_thread(void *_max) +{ + struct uart_max3110 *max = _max; + wait_queue_head_t *wq = &max->wq; + int ret = 0; + struct circ_buf *xmit = &max->con_xmit; + + init_waitqueue_head(wq); + pr_info(PR_FMT "start main thread\n"); + + do { + wait_event_interruptible(*wq, max->uart_flags || kthread_should_stop()); + + mutex_lock(&max->thread_mutex); + + if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags)) + max3110_console_receive(max); + + /* first handle console output */ + if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags)) + send_circ_buf(max, xmit); + + /* handle uart output */ + if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags)) + transmit_char(max); + + mutex_unlock(&max->thread_mutex); + + } while (!kthread_should_stop()); + + return ret; +} + +#ifdef CONFIG_MRST_MAX3110_IRQ +static irqreturn_t serial_m3110_irq(int irq, void *dev_id) +{ + struct uart_max3110 *max = dev_id; + + /* max3110's irq is a falling edge, not level triggered, + * so no need to disable the irq */ + if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags)) + wake_up_process(max->main_thread); + + return IRQ_HANDLED; +} +#else +/* if don't use RX IRQ, then need a thread to polling read */ +static int max3110_read_thread(void *_max) +{ + struct uart_max3110 *max = _max; + + pr_info(PR_FMT "start read thread\n"); + do { + mutex_lock(&max->thread_mutex); + max3110_console_receive(max); + mutex_unlock(&max->thread_mutex); + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ / 20); + } while (!kthread_should_stop()); + + return 0; +} +#endif + +static int serial_m3110_startup(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + u16 config = 0; + int ret = 0; + + if (port->line != 0) + pr_err(PR_FMT "uart port startup failed\n"); + + /* firstly disable all IRQ and config it to 115200, 8n1 */ + config = WC_TAG | WC_FIFO_ENABLE + | WC_1_STOPBITS + | WC_8BIT_WORD + | WC_BAUD_DR2; + ret = max3110_out(max, config); + + /* as we use thread to handle tx/rx, need set low latency */ + port->state->port.tty->low_latency = 1; + +#ifdef CONFIG_MRST_MAX3110_IRQ + ret = request_irq(max->irq, serial_m3110_irq, + IRQ_TYPE_EDGE_FALLING, "max3110", max); + if (ret) + return ret; + + /* enable RX IRQ only */ + config |= WC_RXA_IRQ_ENABLE; + max3110_out(max, config); +#else + /* if IRQ is disabled, start a read thread for input data */ + max->read_thread = + kthread_run(max3110_read_thread, max, "max3110_read"); +#endif + + max->cur_conf = config; + return 0; +} + +static void serial_m3110_shutdown(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + u16 config; + + if (max->read_thread) { + kthread_stop(max->read_thread); + max->read_thread = NULL; + } + +#ifdef CONFIG_MRST_MAX3110_IRQ + free_irq(max->irq, max); +#endif + + /* Disable interrupts from this port */ + config = WC_TAG | WC_SW_SHDI; + max3110_out(max, config); +} + +static void serial_m3110_release_port(struct uart_port *port) +{ +} + +static int serial_m3110_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_m3110_config_port(struct uart_port *port, int flags) +{ + /* give it fake type */ + port->type = PORT_PXA; +} + +static int +serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + + +static const char *serial_m3110_type(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + return max->name; +} + +static void +serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + unsigned char cval; + unsigned int baud, parity = 0; + int clk_div = -1; + u16 new_conf = max->cur_conf; + + switch (termios->c_cflag & CSIZE) { + case CS7: + cval = UART_LCR_WLEN7; + new_conf |= WC_7BIT_WORD; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + new_conf |= WC_8BIT_WORD; + break; + } + + baud = uart_get_baud_rate(port, termios, old, 0, 230400); + + /* first calc the div for 1.8MHZ clock case */ + switch (baud) { + case 300: + clk_div = WC_BAUD_DR384; + break; + case 600: + clk_div = WC_BAUD_DR192; + break; + case 1200: + clk_div = WC_BAUD_DR96; + break; + case 2400: + clk_div = WC_BAUD_DR48; + break; + case 4800: + clk_div = WC_BAUD_DR24; + break; + case 9600: + clk_div = WC_BAUD_DR12; + break; + case 19200: + clk_div = WC_BAUD_DR6; + break; + case 38400: + clk_div = WC_BAUD_DR3; + break; + case 57600: + clk_div = WC_BAUD_DR2; + break; + case 115200: + clk_div = WC_BAUD_DR1; + break; + case 230400: + if (max->clock & MAX3110_HIGH_CLK) + break; + default: + /* pick the previous baud rate */ + baud = max->baud; + clk_div = max->cur_conf & WC_BAUD_DIV_MASK; + tty_termios_encode_baud_rate(termios, baud, baud); + } + + if (max->clock & MAX3110_HIGH_CLK) { + clk_div += 1; + /* high clk version max3110 doesn't support B300 */ + if (baud == 300) + baud = 600; + if (baud == 230400) + clk_div = WC_BAUD_DR1; + tty_termios_encode_baud_rate(termios, baud, baud); + } + + new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div; + if (termios->c_cflag & CSTOPB) + new_conf |= WC_2_STOPBITS; + else + new_conf &= ~WC_2_STOPBITS; + + if (termios->c_cflag & PARENB) { + new_conf |= WC_PARITY_ENABLE; + parity |= UART_LCR_PARITY; + } else + new_conf &= ~WC_PARITY_ENABLE; + + if (!(termios->c_cflag & PARODD)) + parity |= UART_LCR_EPAR; + max->parity = parity; + + uart_update_timeout(port, termios->c_cflag, baud); + + new_conf |= WC_TAG; + if (new_conf != max->cur_conf) { + max3110_out(max, new_conf); + max->cur_conf = new_conf; + max->baud = baud; + } +} + +/* don't handle hw handshaking */ +static unsigned int serial_m3110_get_mctrl(struct uart_port *port) +{ + return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR; +} + +static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void serial_m3110_break_ctl(struct uart_port *port, int break_state) +{ +} + +static void serial_m3110_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ +} + +static void serial_m3110_enable_ms(struct uart_port *port) +{ +} + +struct uart_ops serial_m3110_ops = { + .tx_empty = serial_m3110_tx_empty, + .set_mctrl = serial_m3110_set_mctrl, + .get_mctrl = serial_m3110_get_mctrl, + .stop_tx = serial_m3110_stop_tx, + .start_tx = serial_m3110_start_tx, + .stop_rx = serial_m3110_stop_rx, + .enable_ms = serial_m3110_enable_ms, + .break_ctl = serial_m3110_break_ctl, + .startup = serial_m3110_startup, + .shutdown = serial_m3110_shutdown, + .set_termios = serial_m3110_set_termios, /* must have */ + .pm = serial_m3110_pm, + .type = serial_m3110_type, + .release_port = serial_m3110_release_port, + .request_port = serial_m3110_request_port, + .config_port = serial_m3110_config_port, + .verify_port = serial_m3110_verify_port, +}; + +static struct uart_driver serial_m3110_reg = { + .owner = THIS_MODULE, + .driver_name = "MRST serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = 1, + .cons = MRST_CONSOLE, +}; + +static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state) +{ + return 0; +} + +static int serial_m3110_resume(struct spi_device *spi) +{ + return 0; +} + +static struct dw_spi_chip spi0_uart = { + .poll_mode = 1, + .enable_dma = 0, + .type = SPI_FRF_SPI, +}; + +static int serial_m3110_probe(struct spi_device *spi) +{ + struct uart_max3110 *max; + int ret; + unsigned char *buffer; + u16 res; + max = kzalloc(sizeof(*max), GFP_KERNEL); + if (!max) + return -ENOMEM; + + /* set spi info */ + spi->mode = SPI_MODE_0; + spi->bits_per_word = 16; + max->clock = MAX3110_HIGH_CLK; + spi->controller_data = &spi0_uart; + + spi_setup(spi); + + max->port.type = PORT_PXA; /* need apply for a max3110 type */ + max->port.fifosize = 2; /* only have 16b buffer */ + max->port.ops = &serial_m3110_ops; + max->port.line = 0; + max->port.dev = &spi->dev; + max->port.uartclk = 115200; + + max->spi = spi; + max->name = spi->modalias; /* use spi name as the name */ + max->irq = (u16)spi->irq; + + mutex_init(&max->thread_mutex); + + max->word_7bits = 0; + max->parity = 0; + max->baud = 0; + + max->cur_conf = 0; + max->uart_flags = 0; + + /* Check if reading configuration register returns something sane */ + + res = RC_TAG; + ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0); + if (ret < 0 || res == 0 || res == 0xffff) { + printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)", + res); + ret = -ENODEV; + goto err_get_page; + } + buffer = (unsigned char *)__get_free_page(GFP_KERNEL); + if (!buffer) { + ret = -ENOMEM; + goto err_get_page; + } + max->con_xmit.buf = (unsigned char *)buffer; + max->con_xmit.head = max->con_xmit.tail = 0; + + max->main_thread = kthread_run(max3110_main_thread, + max, "max3110_main"); + if (IS_ERR(max->main_thread)) { + ret = PTR_ERR(max->main_thread); + goto err_kthread; + } + + pmax = max; + /* give membase a psudo value to pass serial_core's check */ + max->port.membase = (void *)0xff110000; + uart_add_one_port(&serial_m3110_reg, &max->port); + + return 0; + +err_kthread: + free_page((unsigned long)buffer); +err_get_page: + pmax = NULL; + kfree(max); + return ret; +} + +static int max3110_remove(struct spi_device *dev) +{ + struct uart_max3110 *max = pmax; + + if (!pmax) + return 0; + + pmax = NULL; + uart_remove_one_port(&serial_m3110_reg, &max->port); + + free_page((unsigned long)max->con_xmit.buf); + + if (max->main_thread) + kthread_stop(max->main_thread); + + kfree(max); + return 0; +} + +static struct spi_driver uart_max3110_driver = { + .driver = { + .name = "spi_max3111", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = serial_m3110_probe, + .remove = __devexit_p(max3110_remove), + .suspend = serial_m3110_suspend, + .resume = serial_m3110_resume, +}; + + +int __init serial_m3110_init(void) +{ + int ret = 0; + + ret = uart_register_driver(&serial_m3110_reg); + if (ret) + return ret; + + ret = spi_register_driver(&uart_max3110_driver); + if (ret) + uart_unregister_driver(&serial_m3110_reg); + + return ret; +} + +void __exit serial_m3110_exit(void) +{ + spi_unregister_driver(&uart_max3110_driver); + uart_unregister_driver(&serial_m3110_reg); +} + +module_init(serial_m3110_init); +module_exit(serial_m3110_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("max3110-uart"); diff --git a/drivers/serial/mrst_max3110.h b/drivers/serial/mrst_max3110.h new file mode 100644 index 0000000..363478a --- /dev/null +++ b/drivers/serial/mrst_max3110.h @@ -0,0 +1,59 @@ +#ifndef _MRST_MAX3110_H +#define _MRST_MAX3110_H + +#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */ +#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */ + +/* status bits for all 4 MAX3110 operate modes */ +#define MAX3110_READ_DATA_AVAILABLE (1 << 15) +#define MAX3110_WRITE_BUF_EMPTY (1 << 14) + +#define WC_TAG (3 << 14) +#define RC_TAG (1 << 14) +#define WD_TAG (2 << 14) +#define RD_TAG (0 << 14) + +/* bits def for write configuration */ +#define WC_FIFO_ENABLE_MASK (1 << 13) +#define WC_FIFO_ENABLE (0 << 13) + +#define WC_SW_SHDI (1 << 12) + +#define WC_IRQ_MASK (0xF << 8) +#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */ +#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX availabe irq */ +#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9) +#define WC_REC_ACT_IRQ_ENABLE (1 << 8) + +#define WC_IRDA_ENABLE (1 << 7) + +#define WC_STOPBITS_MASK (1 << 6) +#define WC_2_STOPBITS (1 << 6) +#define WC_1_STOPBITS (0 << 6) + +#define WC_PARITY_ENABLE_MASK (1 << 5) +#define WC_PARITY_ENABLE (1 << 5) + +#define WC_WORDLEN_MASK (1 << 4) +#define WC_7BIT_WORD (1 << 4) +#define WC_8BIT_WORD (0 << 4) + +#define WC_BAUD_DIV_MASK (0xF) +#define WC_BAUD_DR1 (0x0) +#define WC_BAUD_DR2 (0x1) +#define WC_BAUD_DR4 (0x2) +#define WC_BAUD_DR8 (0x3) +#define WC_BAUD_DR16 (0x4) +#define WC_BAUD_DR32 (0x5) +#define WC_BAUD_DR64 (0x6) +#define WC_BAUD_DR128 (0x7) +#define WC_BAUD_DR3 (0x8) +#define WC_BAUD_DR6 (0x9) +#define WC_BAUD_DR12 (0xA) +#define WC_BAUD_DR24 (0xB) +#define WC_BAUD_DR48 (0xC) +#define WC_BAUD_DR96 (0xD) +#define WC_BAUD_DR192 (0xE) +#define WC_BAUD_DR384 (0xF) + +#endif diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 7f28307..cd85112 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -58,9 +58,9 @@ static struct lock_class_key port_lock_key; #define uart_console(port) (0) #endif -static void uart_change_speed(struct uart_state *state, +static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, struct ktermios *old_termios); -static void uart_wait_until_sent(struct tty_struct *tty, int timeout); +static void __uart_wait_until_sent(struct uart_port *port, int timeout); static void uart_change_pm(struct uart_state *state, int pm_state); /* @@ -137,7 +137,7 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) * Startup the port. This will be called once per open. All calls * will be serialised by the per-port mutex. */ -static int uart_startup(struct uart_state *state, int init_hw) +static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw) { struct uart_port *uport = state->uart_port; struct tty_port *port = &state->port; @@ -152,7 +152,7 @@ static int uart_startup(struct uart_state *state, int init_hw) * once we have successfully opened the port. Also set * up the tty->alt_speed kludge */ - set_bit(TTY_IO_ERROR, &port->tty->flags); + set_bit(TTY_IO_ERROR, &tty->flags); if (uport->type == PORT_UNKNOWN) return 0; @@ -177,26 +177,26 @@ static int uart_startup(struct uart_state *state, int init_hw) /* * Initialise the hardware port settings. */ - uart_change_speed(state, NULL); + uart_change_speed(tty, state, NULL); /* * Setup the RTS and DTR signals once the * port is open and ready to respond. */ - if (port->tty->termios->c_cflag & CBAUD) + if (tty->termios->c_cflag & CBAUD) uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); } if (port->flags & ASYNC_CTS_FLOW) { spin_lock_irq(&uport->lock); if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) - port->tty->hw_stopped = 1; + tty->hw_stopped = 1; spin_unlock_irq(&uport->lock); } set_bit(ASYNCB_INITIALIZED, &port->flags); - clear_bit(TTY_IO_ERROR, &port->tty->flags); + clear_bit(TTY_IO_ERROR, &tty->flags); } if (retval && capable(CAP_SYS_ADMIN)) @@ -210,11 +210,10 @@ static int uart_startup(struct uart_state *state, int init_hw) * DTR is dropped if the hangup on close termio flag is on. Calls to * uart_shutdown are serialised by the per-port semaphore. */ -static void uart_shutdown(struct uart_state *state) +static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) { struct uart_port *uport = state->uart_port; struct tty_port *port = &state->port; - struct tty_struct *tty = port->tty; /* * Set the TTY IO error marker @@ -430,11 +429,10 @@ uart_get_divisor(struct uart_port *port, unsigned int baud) EXPORT_SYMBOL(uart_get_divisor); /* FIXME: Consistent locking policy */ -static void -uart_change_speed(struct uart_state *state, struct ktermios *old_termios) +static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, + struct ktermios *old_termios) { struct tty_port *port = &state->port; - struct tty_struct *tty = port->tty; struct uart_port *uport = state->uart_port; struct ktermios *termios; @@ -463,8 +461,8 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios) uport->ops->set_termios(uport, termios, old_termios); } -static inline int -__uart_put_char(struct uart_port *port, struct circ_buf *circ, unsigned char c) +static inline int __uart_put_char(struct uart_port *port, + struct circ_buf *circ, unsigned char c) { unsigned long flags; int ret = 0; @@ -494,8 +492,8 @@ static void uart_flush_chars(struct tty_struct *tty) uart_start(tty); } -static int -uart_write(struct tty_struct *tty, const unsigned char *buf, int count) +static int uart_write(struct tty_struct *tty, + const unsigned char *buf, int count) { struct uart_state *state = tty->driver_data; struct uart_port *port; @@ -675,7 +673,7 @@ static int uart_get_info(struct uart_state *state, return 0; } -static int uart_set_info(struct uart_state *state, +static int uart_set_info(struct tty_struct *tty, struct uart_state *state, struct serial_struct __user *newinfo) { struct serial_struct new_serial; @@ -770,7 +768,7 @@ static int uart_set_info(struct uart_state *state, * We need to shutdown the serial port at the old * port/type/irq combination. */ - uart_shutdown(state); + uart_shutdown(tty, state); } if (change_port) { @@ -869,25 +867,27 @@ static int uart_set_info(struct uart_state *state, "is deprecated.\n", current->comm, tty_name(port->tty, buf)); } - uart_change_speed(state, NULL); + uart_change_speed(tty, state, NULL); } } else - retval = uart_startup(state, 1); + retval = uart_startup(tty, state, 1); exit: mutex_unlock(&port->mutex); return retval; } - -/* - * uart_get_lsr_info - get line status register info. - * Note: uart_ioctl protects us against hangups. +/** + * uart_get_lsr_info - get line status register info + * @tty: tty associated with the UART + * @state: UART being queried + * @value: returned modem value + * + * Note: uart_ioctl protects us against hangups. */ -static int uart_get_lsr_info(struct uart_state *state, - unsigned int __user *value) +static int uart_get_lsr_info(struct tty_struct *tty, + struct uart_state *state, unsigned int __user *value) { struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; unsigned int result; result = uport->ops->tx_empty(uport); @@ -900,7 +900,7 @@ static int uart_get_lsr_info(struct uart_state *state, */ if (uport->x_char || ((uart_circ_chars_pending(&state->xmit) > 0) && - !port->tty->stopped && !port->tty->hw_stopped)) + !tty->stopped && !tty->hw_stopped)) result &= ~TIOCSER_TEMT; return put_user(result, value); @@ -961,7 +961,7 @@ static int uart_break_ctl(struct tty_struct *tty, int break_state) return 0; } -static int uart_do_autoconfig(struct uart_state *state) +static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state) { struct uart_port *uport = state->uart_port; struct tty_port *port = &state->port; @@ -980,7 +980,7 @@ static int uart_do_autoconfig(struct uart_state *state) ret = -EBUSY; if (tty_port_users(port) == 1) { - uart_shutdown(state); + uart_shutdown(tty, state); /* * If we already have a port type configured, @@ -999,7 +999,7 @@ static int uart_do_autoconfig(struct uart_state *state) */ uport->ops->config_port(uport, flags); - ret = uart_startup(state, 1); + ret = uart_startup(tty, state, 1); } mutex_unlock(&port->mutex); return ret; @@ -1122,11 +1122,11 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, break; case TIOCSSERIAL: - ret = uart_set_info(state, uarg); + ret = uart_set_info(tty, state, uarg); break; case TIOCSERCONFIG: - ret = uart_do_autoconfig(state); + ret = uart_do_autoconfig(tty, state); break; case TIOCSERGWILD: /* obsolete */ @@ -1172,7 +1172,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, */ switch (cmd) { case TIOCSERGETLSR: /* Get line status register */ - ret = uart_get_lsr_info(state, uarg); + ret = uart_get_lsr_info(tty, state, uarg); break; default: { @@ -1194,7 +1194,7 @@ static void uart_set_ldisc(struct tty_struct *tty) struct uart_port *uport = state->uart_port; if (uport->ops->set_ldisc) - uport->ops->set_ldisc(uport); + uport->ops->set_ldisc(uport, tty->termios->c_line); } static void uart_set_termios(struct tty_struct *tty, @@ -1219,7 +1219,7 @@ static void uart_set_termios(struct tty_struct *tty, return; } - uart_change_speed(state, old_termios); + uart_change_speed(tty, state, old_termios); /* Handle transition to B0 status */ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) @@ -1272,8 +1272,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) struct uart_state *state = tty->driver_data; struct tty_port *port; struct uart_port *uport; + unsigned long flags; - BUG_ON(!kernel_locked()); + BUG_ON(!tty_locked()); if (!state) return; @@ -1284,9 +1285,12 @@ static void uart_close(struct tty_struct *tty, struct file *filp) pr_debug("uart_close(%d) called\n", uport->line); mutex_lock(&port->mutex); + spin_lock_irqsave(&port->lock, flags); - if (tty_hung_up_p(filp)) + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&port->lock, flags); goto done; + } if ((tty->count == 1) && (port->count != 1)) { /* @@ -1305,8 +1309,10 @@ static void uart_close(struct tty_struct *tty, struct file *filp) tty->name, port->count); port->count = 0; } - if (port->count) + if (port->count) { + spin_unlock_irqrestore(&port->lock, flags); goto done; + } /* * Now we wait for the transmit buffer to clear; and we notify @@ -1314,9 +1320,18 @@ static void uart_close(struct tty_struct *tty, struct file *filp) * setting tty->closing. */ tty->closing = 1; + spin_unlock_irqrestore(&port->lock, flags); - if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait)); + if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) { + /* + * hack: open-coded tty_wait_until_sent to avoid + * recursive tty_lock + */ + long timeout = msecs_to_jiffies(port->closing_wait); + if (wait_event_interruptible_timeout(tty->write_wait, + !tty_chars_in_buffer(tty), timeout) >= 0) + __uart_wait_until_sent(uport, timeout); + } /* * At this point, we stop accepting input. To do this, we @@ -1332,45 +1347,47 @@ static void uart_close(struct tty_struct *tty, struct file *filp) * has completely drained; this is especially * important if there is a transmit FIFO! */ - uart_wait_until_sent(tty, uport->timeout); + __uart_wait_until_sent(uport, uport->timeout); } - uart_shutdown(state); + uart_shutdown(tty, state); uart_flush_buffer(tty); tty_ldisc_flush(tty); - tty->closing = 0; tty_port_tty_set(port, NULL); + spin_lock_irqsave(&port->lock, flags); + tty->closing = 0; if (port->blocked_open) { + spin_unlock_irqrestore(&port->lock, flags); if (port->close_delay) msleep_interruptible(port->close_delay); + spin_lock_irqsave(&port->lock, flags); } else if (!uart_console(uport)) { + spin_unlock_irqrestore(&port->lock, flags); uart_change_pm(state, 3); + spin_lock_irqsave(&port->lock, flags); } /* * Wake up anyone trying to open this port. */ clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); + spin_unlock_irqrestore(&port->lock, flags); wake_up_interruptible(&port->open_wait); done: mutex_unlock(&port->mutex); } -static void uart_wait_until_sent(struct tty_struct *tty, int timeout) +static void __uart_wait_until_sent(struct uart_port *port, int timeout) { - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; unsigned long char_time, expire; if (port->type == PORT_UNKNOWN || port->fifosize == 0) return; - lock_kernel(); - /* * Set the check interval to be 1/5 of the estimated time to * send a single character, and make it at least 1. The check @@ -1416,7 +1433,16 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout) break; } set_current_state(TASK_RUNNING); /* might not be needed */ - unlock_kernel(); +} + +static void uart_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + + tty_lock(); + __uart_wait_until_sent(port, timeout); + tty_unlock(); } /* @@ -1429,16 +1455,19 @@ static void uart_hangup(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct tty_port *port = &state->port; + unsigned long flags; - BUG_ON(!kernel_locked()); + BUG_ON(!tty_locked()); pr_debug("uart_hangup(%d)\n", state->uart_port->line); mutex_lock(&port->mutex); if (port->flags & ASYNC_NORMAL_ACTIVE) { uart_flush_buffer(tty); - uart_shutdown(state); + uart_shutdown(tty, state); + spin_lock_irqsave(&port->lock, flags); port->count = 0; clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); + spin_unlock_irqrestore(&port->lock, flags); tty_port_tty_set(port, NULL); wake_up_interruptible(&port->open_wait); wake_up_interruptible(&port->delta_msr_wait); @@ -1446,15 +1475,19 @@ static void uart_hangup(struct tty_struct *tty) mutex_unlock(&port->mutex); } -/* - * Copy across the serial console cflag setting into the termios settings - * for the initial open of the port. This allows continuity between the - * kernel settings, and the settings init adopts when it opens the port - * for the first time. +/** + * uart_update_termios - update the terminal hw settings + * @tty: tty associated with UART + * @state: UART to update + * + * Copy across the serial console cflag setting into the termios settings + * for the initial open of the port. This allows continuity between the + * kernel settings, and the settings init adopts when it opens the port + * for the first time. */ -static void uart_update_termios(struct uart_state *state) +static void uart_update_termios(struct tty_struct *tty, + struct uart_state *state) { - struct tty_struct *tty = state->port.tty; struct uart_port *port = state->uart_port; if (uart_console(port) && port->cons->cflag) { @@ -1471,7 +1504,7 @@ static void uart_update_termios(struct uart_state *state) /* * Make termios settings take effect. */ - uart_change_speed(state, NULL); + uart_change_speed(tty, state, NULL); /* * And finally enable the RTS and DTR signals. @@ -1481,90 +1514,37 @@ static void uart_update_termios(struct uart_state *state) } } -/* - * Block the open until the port is ready. We must be called with - * the per-port semaphore held. - */ -static int -uart_block_til_ready(struct file *filp, struct uart_state *state) +static int uart_carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); + struct uart_state *state = container_of(port, struct uart_state, port); struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - unsigned int mctrl; - - port->blocked_open++; - port->count--; - - add_wait_queue(&port->open_wait, &wait); - while (1) { - set_current_state(TASK_INTERRUPTIBLE); - - /* - * If we have been hung up, tell userspace/restart open. - */ - if (tty_hung_up_p(filp) || port->tty == NULL) - break; - - /* - * If the port has been closed, tell userspace/restart open. - */ - if (!(port->flags & ASYNC_INITIALIZED)) - break; + int mctrl; + spin_lock_irq(&uport->lock); + uport->ops->enable_ms(uport); + mctrl = uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + if (mctrl & TIOCM_CAR) + return 1; + return 0; +} - /* - * If non-blocking mode is set, or CLOCAL mode is set, - * we don't want to wait for the modem status lines to - * indicate that the port is ready. - * - * Also, if the port is not enabled/configured, we want - * to allow the open to succeed here. Note that we will - * have set TTY_IO_ERROR for a non-existant port. - */ - if ((filp->f_flags & O_NONBLOCK) || - (port->tty->termios->c_cflag & CLOCAL) || - (port->tty->flags & (1 << TTY_IO_ERROR))) - break; +static void uart_dtr_rts(struct tty_port *port, int onoff) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; - /* - * Set DTR to allow modem to know we're waiting. Do - * not set RTS here - we want to make sure we catch - * the data from the modem. - */ - if (port->tty->termios->c_cflag & CBAUD) - uart_set_mctrl(uport, TIOCM_DTR); + if (onoff) { + uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); /* - * and wait for the carrier to indicate that the - * modem is ready for us. + * If this is the first open to succeed, + * adjust things to suit. */ - spin_lock_irq(&uport->lock); - uport->ops->enable_ms(uport); - mctrl = uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); - if (mctrl & TIOCM_CAR) - break; - - mutex_unlock(&port->mutex); - schedule(); - mutex_lock(&port->mutex); - - if (signal_pending(current)) - break; + if (!test_and_set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags)) + uart_update_termios(port->tty, state); } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - - port->count++; - port->blocked_open--; - - if (signal_pending(current)) - return -ERESTARTSYS; - - if (!port->tty || tty_hung_up_p(filp)) - return -EAGAIN; - - return 0; + else + uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); } static struct uart_state *uart_get(struct uart_driver *drv, int line) @@ -1611,7 +1591,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp) struct tty_port *port; int retval, line = tty->index; - BUG_ON(!kernel_locked()); + BUG_ON(!tty_locked()); pr_debug("uart_open(%d) called\n", line); /* @@ -1668,23 +1648,14 @@ static int uart_open(struct tty_struct *tty, struct file *filp) /* * Start up the serial port. */ - retval = uart_startup(state, 0); + retval = uart_startup(tty, state, 0); /* * If we succeeded, wait until the port is ready. */ - if (retval == 0) - retval = uart_block_til_ready(filp, state); mutex_unlock(&port->mutex); - - /* - * If this is the first open to succeed, adjust things to suit. - */ - if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) { - set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); - - uart_update_termios(state); - } + if (retval == 0) + retval = tty_port_block_til_ready(port, tty, filp); fail: return retval; @@ -2010,9 +1981,13 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) struct tty_port *port = &state->port; struct device *tty_dev; struct uart_match match = {uport, drv}; + struct tty_struct *tty; mutex_lock(&port->mutex); + /* Must be inside the mutex lock until we convert to tty_port */ + tty = port->tty; + tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (device_may_wakeup(tty_dev)) { enable_irq_wake(uport->irq); @@ -2105,9 +2080,12 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) ops->set_mctrl(uport, 0); spin_unlock_irq(&uport->lock); if (console_suspend_enabled || !uart_console(uport)) { + /* Protected by port mutex for now */ + struct tty_struct *tty = port->tty; ret = ops->startup(uport); if (ret == 0) { - uart_change_speed(state, NULL); + if (tty) + uart_change_speed(tty, state, NULL); spin_lock_irq(&uport->lock); ops->set_mctrl(uport, uport->mctrl); ops->start_tx(uport); @@ -2119,7 +2097,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) * Clear the "initialized" flag so we won't try * to call the low level drivers shutdown method. */ - uart_shutdown(state); + uart_shutdown(tty, state); } } @@ -2312,6 +2290,11 @@ static const struct tty_operations uart_ops = { #endif }; +static const struct tty_port_operations uart_port_ops = { + .carrier_raised = uart_carrier_raised, + .dtr_rts = uart_dtr_rts, +}; + /** * uart_register_driver - register a driver with the uart core layer * @drv: low level driver structure @@ -2368,6 +2351,7 @@ int uart_register_driver(struct uart_driver *drv) struct tty_port *port = &state->port; tty_port_init(port); + port->ops = &uart_port_ops; port->close_delay = 500; /* .5 seconds */ port->closing_wait = 30000; /* 30 seconds */ tasklet_init(&state->tlet, uart_tasklet_action, diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c index 67ca642..1f36b7e 100644 --- a/drivers/serial/timbuart.c +++ b/drivers/serial/timbuart.c @@ -423,7 +423,7 @@ static struct uart_driver timbuart_driver = { .nr = 1 }; -static int timbuart_probe(struct platform_device *dev) +static int __devinit timbuart_probe(struct platform_device *dev) { int err, irq; struct timbuart_port *uart; @@ -489,7 +489,7 @@ err_mem: return err; } -static int timbuart_remove(struct platform_device *dev) +static int __devexit timbuart_remove(struct platform_device *dev) { struct timbuart_port *uart = platform_get_drvdata(dev); @@ -507,7 +507,7 @@ static struct platform_driver timbuart_platform_driver = { .owner = THIS_MODULE, }, .probe = timbuart_probe, - .remove = timbuart_remove, + .remove = __devexit_p(timbuart_remove), }; /*--------------------------------------------------------------------------*/ diff --git a/drivers/staging/easycap/easycap.h b/drivers/staging/easycap/easycap.h index ad836d2..f3c827e 100644 --- a/drivers/staging/easycap/easycap.h +++ b/drivers/staging/easycap/easycap.h @@ -463,15 +463,12 @@ struct data_buffer audio_buffer[]; void easycap_complete(struct urb *); int easycap_open(struct inode *, struct file *); int easycap_release(struct inode *, struct file *); -int easycap_ioctl(struct inode *, struct file *, \ - unsigned int, unsigned long); +long easycap_ioctl(struct file *, unsigned int, unsigned long); /*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/ #if defined(EASYCAP_IS_VIDEODEV_CLIENT) int easycap_open_noinode(struct file *); int easycap_release_noinode(struct file *); -long easycap_ioctl_noinode(struct file *, \ - unsigned int, unsigned long); int videodev_release(struct video_device *); #endif /*EASYCAP_IS_VIDEODEV_CLIENT*/ /*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ @@ -515,8 +512,7 @@ void easysnd_complete(struct urb *); ssize_t easysnd_read(struct file *, char __user *, size_t, loff_t *); int easysnd_open(struct inode *, struct file *); int easysnd_release(struct inode *, struct file *); -int easysnd_ioctl(struct inode *, struct file *, \ - unsigned int, unsigned long); +long easysnd_ioctl(struct file *, unsigned int, unsigned long); unsigned int easysnd_poll(struct file *, poll_table *); void easysnd_delete(struct kref *); int submit_audio_urbs(struct easycap *); diff --git a/drivers/staging/easycap/easycap_ioctl.c b/drivers/staging/easycap/easycap_ioctl.c index 276b63d..9a42ae0 100644 --- a/drivers/staging/easycap/easycap_ioctl.c +++ b/drivers/staging/easycap/easycap_ioctl.c @@ -25,6 +25,7 @@ */ /*****************************************************************************/ +#include <linux/smp_lock.h> #include "easycap.h" #include "easycap_debug.h" #include "easycap_standard.h" @@ -773,19 +774,10 @@ while (0xFFFFFFFF != easycap_control[i1].id) { SAY("WARNING: failed to adjust mute: control not found\n"); return -ENOENT; } -/****************************************************************************/ -/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/ -#if defined(EASYCAP_IS_VIDEODEV_CLIENT) -long -easycap_ioctl_noinode(struct file *file, unsigned int cmd, unsigned long arg)\ - { - return easycap_ioctl((struct inode *)NULL, file, cmd, arg); -} -#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/ -/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ + /*--------------------------------------------------------------------------*/ -int easycap_ioctl(struct inode *inode, struct file *file, \ - unsigned int cmd, unsigned long arg) +static int easycap_ioctl_bkl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) { static struct easycap *peasycap; static struct usb_device *p; @@ -1956,19 +1948,22 @@ default: { } return 0; } -/****************************************************************************/ -/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/ -#if defined(EASYCAP_IS_VIDEODEV_CLIENT) -long -easysnd_ioctl_noinode(struct file *file, unsigned int cmd, unsigned long arg) + +long easycap_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { - return easysnd_ioctl((struct inode *)NULL, file, cmd, arg); + struct inode *inode = file->f_dentry->d_inode; + long ret; + + lock_kernel(); + ret = easycap_ioctl_bkl(inode, file, cmd, arg); + unlock_kernel(); + + return ret; } -#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/ -/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ + /*--------------------------------------------------------------------------*/ -int easysnd_ioctl(struct inode *inode, struct file *file, \ - unsigned int cmd, unsigned long arg) +static int easysnd_ioctl_bkl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) { struct easycap *peasycap; struct usb_device *p; @@ -2158,6 +2153,19 @@ default: { } return 0; } + +long easysnd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct inode *inode = file->f_dentry->d_inode; + long ret; + + lock_kernel(); + ret = easysnd_ioctl_bkl(inode, file, cmd, arg); + unlock_kernel(); + + return ret; +} + /*****************************************************************************/ int explain_ioctl(__u32 wot) { diff --git a/drivers/staging/easycap/easycap_main.c b/drivers/staging/easycap/easycap_main.c index 09c194c..5a4bbd9 100644 --- a/drivers/staging/easycap/easycap_main.c +++ b/drivers/staging/easycap/easycap_main.c @@ -60,13 +60,13 @@ struct usb_driver easycap_usb_driver = { */ /*---------------------------------------------------------------------------*/ const struct file_operations easycap_fops = { -.owner = THIS_MODULE, -.open = easycap_open, -.release = easycap_release, -.ioctl = easycap_ioctl, -.poll = easycap_poll, -.mmap = easycap_mmap, -.llseek = no_llseek, + .owner = THIS_MODULE, + .open = easycap_open, + .release = easycap_release, + .unlocked_ioctl = easycap_ioctl, + .poll = easycap_poll, + .mmap = easycap_mmap, + .llseek = no_llseek, }; struct vm_operations_struct easycap_vm_ops = { .open = easycap_vma_open, @@ -83,12 +83,12 @@ struct usb_class_driver easycap_class = { #if defined(EASYCAP_IS_VIDEODEV_CLIENT) #if defined(EASYCAP_NEEDS_V4L2_FOPS) const struct v4l2_file_operations v4l2_fops = { -.owner = THIS_MODULE, -.open = easycap_open_noinode, -.release = easycap_release_noinode, -.ioctl = easycap_ioctl_noinode, -.poll = easycap_poll, -.mmap = easycap_mmap, + .owner = THIS_MODULE, + .open = easycap_open_noinode, + .release = easycap_release_noinode, + .unlocked_ioctl = easycap_ioctl, + .poll = easycap_poll, + .mmap = easycap_mmap, }; #endif /*EASYCAP_NEEDS_V4L2_FOPS*/ int video_device_many /*=0*/; @@ -102,12 +102,12 @@ struct video_device *pvideo_array[VIDEO_DEVICE_MANY], *pvideo_device; */ /*--------------------------------------------------------------------------*/ const struct file_operations easysnd_fops = { -.owner = THIS_MODULE, -.open = easysnd_open, -.release = easysnd_release, -.ioctl = easysnd_ioctl, -.read = easysnd_read, -.llseek = no_llseek, + .owner = THIS_MODULE, + .open = easysnd_open, + .release = easysnd_release, + .unlocked_ioctl = easysnd_ioctl, + .read = easysnd_read, + .llseek = no_llseek, }; struct usb_class_driver easysnd_class = { .name = "usb/easysnd%d", diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c index bc1c605..97dae29 100644 --- a/drivers/staging/pohmelfs/inode.c +++ b/drivers/staging/pohmelfs/inode.c @@ -968,12 +968,18 @@ int pohmelfs_setattr_raw(struct inode *inode, struct iattr *attr) goto err_out_exit; } - err = inode_setattr(inode, attr); - if (err) { - dprintk("%s: ino: %llu, failed to set the attributes.\n", __func__, POHMELFS_I(inode)->ino); - goto err_out_exit; + if ((attr->ia_valid & ATTR_SIZE) && + attr->ia_size != i_size_read(inode)) { + err = vmtruncate(inode, attr->ia_size); + if (err) { + dprintk("%s: ino: %llu, failed to set the attributes.\n", __func__, POHMELFS_I(inode)->ino); + goto err_out_exit; + } } + setattr_copy(inode, attr); + mark_inode_dirty(inode); + dprintk("%s: ino: %llu, mode: %o -> %o, uid: %u -> %u, gid: %u -> %u, size: %llu -> %llu.\n", __func__, POHMELFS_I(inode)->ino, inode->i_mode, attr->ia_mode, inode->i_uid, attr->ia_uid, inode->i_gid, attr->ia_gid, inode->i_size, attr->ia_size); @@ -1217,7 +1223,7 @@ void pohmelfs_fill_inode(struct inode *inode, struct netfs_inode_info *info) } } -static void pohmelfs_drop_inode(struct inode *inode) +static int pohmelfs_drop_inode(struct inode *inode) { struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); struct pohmelfs_inode *pi = POHMELFS_I(inode); @@ -1226,7 +1232,7 @@ static void pohmelfs_drop_inode(struct inode *inode) list_del_init(&pi->inode_entry); spin_unlock(&psb->ino_lock); - generic_drop_inode(inode); + return generic_drop_inode(inode); } static struct pohmelfs_inode *pohmelfs_get_inode_from_list(struct pohmelfs_sb *psb, diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c index be5d8db..0574d84 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/staging/usbip/vhci_hcd.c @@ -215,7 +215,7 @@ static int vhci_hub_status(struct usb_hcd *hcd, char *buf) vhci = hcd_to_vhci(hcd); spin_lock_irqsave(&vhci->lock, flags); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { usbip_dbg_vhci_rh("hw accessible flag in on?\n"); goto done; } @@ -269,7 +269,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u32 prev_port_status[VHCI_NPORTS]; - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) return -ETIMEDOUT; /* @@ -1041,7 +1041,7 @@ static int vhci_bus_resume(struct usb_hcd *hcd) dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); spin_lock_irq(&vhci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { rc = -ESHUTDOWN; } else { /* vhci->rh_state = DUMMY_RH_RUNNING; diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 80b4008..239f050 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -41,7 +41,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ -obj-y += early/ +obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 101ffc9..593fc5e 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -564,7 +564,7 @@ static void cxacru_timeout_kill(unsigned long data) } static int cxacru_start_wait_urb(struct urb *urb, struct completion *done, - int* actual_length) + int *actual_length) { struct timer_list timer; @@ -952,7 +952,7 @@ static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw, put_unaligned(cpu_to_le32(addr), (__le32 *)(buf + offb)); offb += 4; addr += l; - if(l) + if (l) memcpy(buf + offb, data + offd, l); if (l < stride) memset(buf + offb + l, 0, stride - l); @@ -967,7 +967,7 @@ static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw, } offb = 0; } - } while(offd < size); + } while (offd < size); dbg("sent fw %#x", fw); ret = 0; @@ -1043,8 +1043,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, if (instance->modem_type->boot_rom_patch) { val = cpu_to_le32(BR_ADDR); ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4); - } - else { + } else { ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0); } if (ret) { @@ -1068,7 +1067,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, } static int cxacru_find_firmware(struct cxacru_data *instance, - char* phase, const struct firmware **fw_p) + char *phase, const struct firmware **fw_p) { struct usbatm_data *usbatm = instance->usbatm; struct device *dev = &usbatm->usb_intf->dev; diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 80f9617..4716e70 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -753,11 +753,13 @@ static struct usb_driver speedtch_usb_driver = { .id_table = speedtch_usb_ids }; -static void speedtch_release_interfaces(struct usb_device *usb_dev, int num_interfaces) { +static void speedtch_release_interfaces(struct usb_device *usb_dev, + int num_interfaces) +{ struct usb_interface *cur_intf; int i; - for(i = 0; i < num_interfaces; i++) + for (i = 0; i < num_interfaces; i++) if ((cur_intf = usb_ifnum_to_if(usb_dev, i))) { usb_set_intfdata(cur_intf, NULL); usb_driver_release_interface(&speedtch_usb_driver, cur_intf); @@ -792,7 +794,7 @@ static int speedtch_bind(struct usbatm_data *usbatm, /* claim all interfaces */ - for (i=0; i < num_interfaces; i++) { + for (i = 0; i < num_interfaces; i++) { cur_intf = usb_ifnum_to_if(usb_dev, i); if ((i != ifnum) && cur_intf) { @@ -842,7 +844,7 @@ static int speedtch_bind(struct usbatm_data *usbatm, use_isoc = 0; /* fall back to bulk if endpoint not found */ - for (i=0; i<desc->desc.bNumEndpoints; i++) { + for (i = 0; i < desc->desc.bNumEndpoints; i++) { const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc; if ((endpoint_desc->bEndpointAddress == target_address)) { diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index ebae944..5b3f555 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -67,6 +67,7 @@ #include <linux/mutex.h> #include <linux/freezer.h> #include <linux/slab.h> +#include <linux/kernel.h> #include <asm/unaligned.h> @@ -2436,7 +2437,6 @@ UEA_ATTR(firmid, 0); /* Retrieve the device End System Identifier (MAC) */ -#define htoi(x) (isdigit(x) ? x-'0' : toupper(x)-'A'+10) static int uea_getesi(struct uea_softc *sc, u_char * esi) { unsigned char mac_str[2 * ETH_ALEN + 1]; @@ -2447,7 +2447,8 @@ static int uea_getesi(struct uea_softc *sc, u_char * esi) return 1; for (i = 0; i < ETH_ALEN; i++) - esi[i] = htoi(mac_str[2 * i]) * 16 + htoi(mac_str[2 * i + 1]); + esi[i] = hex_to_bin(mac_str[2 * i]) * 16 + + hex_to_bin(mac_str[2 * i + 1]); return 0; } diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index 9b53e8d..05bf5a2 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -84,8 +84,8 @@ #ifdef VERBOSE_DEBUG static int usbatm_print_packet(const unsigned char *data, int len); -#define PACKETDEBUG(arg...) usbatm_print_packet (arg) -#define vdbg(arg...) dbg (arg) +#define PACKETDEBUG(arg...) usbatm_print_packet(arg) +#define vdbg(arg...) dbg(arg) #else #define PACKETDEBUG(arg...) #define vdbg(arg...) @@ -273,8 +273,7 @@ static void usbatm_complete(struct urb *urb) if (unlikely(status) && (!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) || - status != -EILSEQ )) - { + status != -EILSEQ)) { if (status == -ESHUTDOWN) return; @@ -494,7 +493,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance, ptr += data_len; __skb_pull(skb, data_len); - if(!left) + if (!left) continue; memset(ptr, 0, left); @@ -506,7 +505,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance, trailer[2] = ctrl->len >> 8; trailer[3] = ctrl->len; - ctrl->crc = ~ crc32_be(ctrl->crc, ptr, left - 4); + ctrl->crc = ~crc32_be(ctrl->crc, ptr, left - 4); trailer[4] = ctrl->crc >> 24; trailer[5] = ctrl->crc >> 16; @@ -516,8 +515,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance, target[3] |= 0x2; /* adjust PTI */ ctrl->len = 0; /* tag this skb finished */ - } - else + } else ctrl->crc = crc32_be(ctrl->crc, ptr, left); } @@ -1146,7 +1144,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->bulk_out); /* tx buffer size must be a positive multiple of the stride */ - instance->tx_channel.buf_size = max (instance->tx_channel.stride, + instance->tx_channel.buf_size = max(instance->tx_channel.stride, snd_buf_bytes - (snd_buf_bytes % instance->tx_channel.stride)); /* rx buffer size must be a positive multiple of the endpoint maxpacket */ @@ -1159,7 +1157,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, goto fail_unbind; } - num_packets = max (1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */ + num_packets = max(1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */ if (num_packets * maxpacket > UDSL_MAX_BUF_SIZE) num_packets--; @@ -1262,7 +1260,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, usb_free_urb(instance->urbs[i]); } - kfree (instance); + kfree(instance); return error; } @@ -1390,9 +1388,8 @@ static int usbatm_print_packet(const unsigned char *data, int len) for (i = 0; i < len;) { buffer[0] = '\0'; sprintf(buffer, "%.3d :", i); - for (j = 0; (j < 16) && (i < len); j++, i++) { + for (j = 0; (j < 16) && (i < len); j++, i++) sprintf(buffer, "%s %2.2x", buffer, data[i]); - } dbg("%s", buffer); } return i; diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h index 0863f85..5fc4894 100644 --- a/drivers/usb/atm/usbatm.h +++ b/drivers/usb/atm/usbatm.h @@ -48,7 +48,7 @@ dev_warn(&(instance)->usb_intf->dev, \ "failed assertion '%s' at line %d", \ __stringify(x), __LINE__); \ - } while(0) + } while (0) #endif #define usb_err(instance, format, arg...) \ @@ -59,7 +59,7 @@ dev_warn(&(instance)->usb_intf->dev , format , ## arg) #ifdef DEBUG #define usb_dbg(instance, format, arg...) \ - dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg) + dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg) #else #define usb_dbg(instance, format, arg...) \ do {} while (0) @@ -104,21 +104,21 @@ struct usbatm_data; /* * Assuming all methods exist and succeed, they are called in this order: * -* bind, heavy_init, atm_start, ..., atm_stop, unbind +* bind, heavy_init, atm_start, ..., atm_stop, unbind */ struct usbatm_driver { const char *driver_name; /* init device ... can sleep, or cause probe() failure */ - int (*bind) (struct usbatm_data *, struct usb_interface *, + int (*bind) (struct usbatm_data *, struct usb_interface *, const struct usb_device_id *id); /* additional device initialization that is too slow to be done in probe() */ - int (*heavy_init) (struct usbatm_data *, struct usb_interface *); + int (*heavy_init) (struct usbatm_data *, struct usb_interface *); /* cleanup device ... can sleep, but can't fail */ - void (*unbind) (struct usbatm_data *, struct usb_interface *); + void (*unbind) (struct usbatm_data *, struct usb_interface *); /* init ATM device ... can sleep, or cause ATM initialization failure */ int (*atm_start) (struct usbatm_data *, struct atm_dev *); @@ -126,9 +126,9 @@ struct usbatm_driver { /* cleanup ATM device ... can sleep, but can't fail */ void (*atm_stop) (struct usbatm_data *, struct atm_dev *); - int bulk_in; /* bulk rx endpoint */ - int isoc_in; /* isochronous rx endpoint */ - int bulk_out; /* bulk tx endpoint */ + int bulk_in; /* bulk rx endpoint */ + int isoc_in; /* isochronous rx endpoint */ + int bulk_out; /* bulk tx endpoint */ unsigned rx_padding; unsigned tx_padding; @@ -156,7 +156,7 @@ struct usbatm_channel { struct usbatm_data { /****************** * public fields * - ******************/ + ******************/ /* mini driver */ struct usbatm_driver *driver; @@ -174,7 +174,7 @@ struct usbatm_data { /******************************** * private fields - do not use * - ********************************/ + ********************************/ struct kref refcount; struct mutex serialize; diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c index 17d167b..48ee0c5 100644 --- a/drivers/usb/atm/xusbatm.c +++ b/drivers/usb/atm/xusbatm.c @@ -49,13 +49,13 @@ static struct usbatm_driver xusbatm_drivers[XUSBATM_DRIVERS_MAX]; static struct usb_device_id xusbatm_usb_ids[XUSBATM_DRIVERS_MAX + 1]; static struct usb_driver xusbatm_usb_driver; -static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int altsetting, u8 ep) +static struct usb_interface *xusbatm_find_intf(struct usb_device *usb_dev, int altsetting, u8 ep) { struct usb_host_interface *alt; struct usb_interface *intf; int i, j; - for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) + for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) if ((intf = usb_dev->actconfig->interface[i]) && (alt = usb_altnum_to_altsetting(intf, altsetting))) for (j = 0; j < alt->desc.bNumEndpoints; j++) if (alt->endpoint[j].desc.bEndpointAddress == ep) @@ -63,7 +63,7 @@ static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int return NULL; } -static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device *usb_dev, +static int xusbatm_capture_intf(struct usbatm_data *usbatm, struct usb_device *usb_dev, struct usb_interface *intf, int altsetting, int claim) { int ifnum = intf->altsetting->desc.bInterfaceNumber; @@ -80,7 +80,7 @@ static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device * return 0; } -static void xusbatm_release_intf (struct usb_device *usb_dev, struct usb_interface *intf, int claimed) +static void xusbatm_release_intf(struct usb_device *usb_dev, struct usb_interface *intf, int claimed) { if (claimed) { usb_set_intfdata(intf, NULL); @@ -147,7 +147,7 @@ static void xusbatm_unbind(struct usbatm_data *usbatm, usb_dbg(usbatm, "%s entered\n", __func__); - for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) { + for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) { struct usb_interface *cur_intf = usb_dev->actconfig->interface[i]; if (cur_intf && (usb_get_intfdata(cur_intf) == usbatm)) { diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c index a22b887..d3e1356 100644 --- a/drivers/usb/c67x00/c67x00-hcd.c +++ b/drivers/usb/c67x00/c67x00-hcd.c @@ -264,7 +264,7 @@ static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg) if (unlikely(hcd->state == HC_STATE_HALT)) return; - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) return; /* Handle Start of frame events */ @@ -282,7 +282,7 @@ static int c67x00_hcd_start(struct usb_hcd *hcd) { hcd->uses_new_polling = 1; hcd->state = HC_STATE_RUNNING; - hcd->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); return 0; } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 89d260d..1833b3a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -636,19 +636,13 @@ static void acm_tty_unregister(struct acm *acm) static int acm_tty_chars_in_buffer(struct tty_struct *tty); -static void acm_port_down(struct acm *acm, int drain) +static void acm_port_down(struct acm *acm) { int i, nr = acm->rx_buflimit; mutex_lock(&open_mutex); if (acm->dev) { usb_autopm_get_interface(acm->control); acm_set_control(acm, acm->ctrlout = 0); - /* try letting the last writes drain naturally */ - if (drain) { - wait_event_interruptible_timeout(acm->drain_wait, - (ACM_NW == acm_wb_is_avail(acm)) || !acm->dev, - ACM_CLOSE_TIMEOUT * HZ); - } usb_kill_urb(acm->ctrlurb); for (i = 0; i < ACM_NW; i++) usb_kill_urb(acm->wb[i].urb); @@ -664,7 +658,7 @@ static void acm_tty_hangup(struct tty_struct *tty) { struct acm *acm = tty->driver_data; tty_port_hangup(&acm->port); - acm_port_down(acm, 0); + acm_port_down(acm); } static void acm_tty_close(struct tty_struct *tty, struct file *filp) @@ -685,7 +679,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&open_mutex); return; } - acm_port_down(acm, 0); + acm_port_down(acm); tty_port_close_end(&acm->port, tty); tty_port_tty_set(&acm->port, NULL); } diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 84f9e52..e325162 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -135,7 +135,7 @@ MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:H * ->lock locks what interrupt accesses. */ struct usblp { - struct usb_device *dev; /* USB device */ + struct usb_device *dev; /* USB device */ struct mutex wmut; struct mutex mut; spinlock_t lock; /* locks rcomplete, wcomplete */ @@ -169,7 +169,8 @@ struct usblp { }; #ifdef DEBUG -static void usblp_dump(struct usblp *usblp) { +static void usblp_dump(struct usblp *usblp) +{ int p; dbg("usblp=0x%p", usblp); @@ -216,8 +217,8 @@ static const struct quirk_printer_struct quirk_printers[] = { { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */ { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */ { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */ - { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */ - { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */ + { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */ + { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */ { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */ { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */ { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */ @@ -254,9 +255,8 @@ static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, i /* High byte has the interface index. Low byte has the alternate setting. */ - if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) { - index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting; - } + if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) + index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting; retval = usb_control_msg(usblp->dev, dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0), @@ -372,7 +372,7 @@ static int usblp_check_status(struct usblp *usblp, int err) return newerr; } -static int handle_bidir (struct usblp *usblp) +static int handle_bidir(struct usblp *usblp) { if (usblp->bidir && usblp->used) { if (usblp_submit_read(usblp) < 0) @@ -395,14 +395,13 @@ static int usblp_open(struct inode *inode, struct file *file) if (minor < 0) return -ENODEV; - mutex_lock (&usblp_mutex); + mutex_lock(&usblp_mutex); retval = -ENODEV; intf = usb_find_interface(&usblp_driver, minor); - if (!intf) { + if (!intf) goto out; - } - usblp = usb_get_intfdata (intf); + usblp = usb_get_intfdata(intf); if (!usblp || !usblp->dev || !usblp->present) goto out; @@ -433,18 +432,18 @@ static int usblp_open(struct inode *inode, struct file *file) retval = -EIO; } out: - mutex_unlock (&usblp_mutex); + mutex_unlock(&usblp_mutex); return retval; } -static void usblp_cleanup (struct usblp *usblp) +static void usblp_cleanup(struct usblp *usblp) { printk(KERN_INFO "usblp%d: removed\n", usblp->minor); kfree(usblp->readbuf); - kfree (usblp->device_id_string); - kfree (usblp->statusbuf); - kfree (usblp); + kfree(usblp->device_id_string); + kfree(usblp->statusbuf); + kfree(usblp); } static void usblp_unlink_urbs(struct usblp *usblp) @@ -458,14 +457,14 @@ static int usblp_release(struct inode *inode, struct file *file) usblp->flags &= ~LP_ABORT; - mutex_lock (&usblp_mutex); + mutex_lock(&usblp_mutex); usblp->used = 0; if (usblp->present) { usblp_unlink_urbs(usblp); usb_autopm_put_interface(usblp->intf); - } else /* finish cleanup from disconnect */ - usblp_cleanup (usblp); - mutex_unlock (&usblp_mutex); + } else /* finish cleanup from disconnect */ + usblp_cleanup(usblp); + mutex_unlock(&usblp_mutex); return 0; } @@ -495,190 +494,190 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) int twoints[2]; int retval = 0; - mutex_lock (&usblp->mut); + mutex_lock(&usblp->mut); if (!usblp->present) { retval = -ENODEV; goto done; } dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd), - _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd) ); + _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd)); if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */ switch (_IOC_NR(cmd)) { - case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */ - if (_IOC_DIR(cmd) != _IOC_READ) { - retval = -EINVAL; - goto done; - } + case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */ + if (_IOC_DIR(cmd) != _IOC_READ) { + retval = -EINVAL; + goto done; + } - length = usblp_cache_device_id_string(usblp); - if (length < 0) { - retval = length; - goto done; - } - if (length > _IOC_SIZE(cmd)) - length = _IOC_SIZE(cmd); /* truncate */ - - if (copy_to_user((void __user *) arg, - usblp->device_id_string, - (unsigned long) length)) { - retval = -EFAULT; - goto done; - } + length = usblp_cache_device_id_string(usblp); + if (length < 0) { + retval = length; + goto done; + } + if (length > _IOC_SIZE(cmd)) + length = _IOC_SIZE(cmd); /* truncate */ + + if (copy_to_user((void __user *) arg, + usblp->device_id_string, + (unsigned long) length)) { + retval = -EFAULT; + goto done; + } - break; + break; - case IOCNR_GET_PROTOCOLS: - if (_IOC_DIR(cmd) != _IOC_READ || - _IOC_SIZE(cmd) < sizeof(twoints)) { - retval = -EINVAL; - goto done; - } + case IOCNR_GET_PROTOCOLS: + if (_IOC_DIR(cmd) != _IOC_READ || + _IOC_SIZE(cmd) < sizeof(twoints)) { + retval = -EINVAL; + goto done; + } - twoints[0] = usblp->current_protocol; - twoints[1] = 0; - for (i = USBLP_FIRST_PROTOCOL; - i <= USBLP_LAST_PROTOCOL; i++) { - if (usblp->protocol[i].alt_setting >= 0) - twoints[1] |= (1<<i); - } + twoints[0] = usblp->current_protocol; + twoints[1] = 0; + for (i = USBLP_FIRST_PROTOCOL; + i <= USBLP_LAST_PROTOCOL; i++) { + if (usblp->protocol[i].alt_setting >= 0) + twoints[1] |= (1<<i); + } - if (copy_to_user((void __user *)arg, - (unsigned char *)twoints, - sizeof(twoints))) { - retval = -EFAULT; - goto done; - } + if (copy_to_user((void __user *)arg, + (unsigned char *)twoints, + sizeof(twoints))) { + retval = -EFAULT; + goto done; + } - break; + break; - case IOCNR_SET_PROTOCOL: - if (_IOC_DIR(cmd) != _IOC_WRITE) { - retval = -EINVAL; - goto done; - } + case IOCNR_SET_PROTOCOL: + if (_IOC_DIR(cmd) != _IOC_WRITE) { + retval = -EINVAL; + goto done; + } #ifdef DEBUG - if (arg == -10) { - usblp_dump(usblp); - break; - } + if (arg == -10) { + usblp_dump(usblp); + break; + } #endif - usblp_unlink_urbs(usblp); - retval = usblp_set_protocol(usblp, arg); - if (retval < 0) { - usblp_set_protocol(usblp, - usblp->current_protocol); - } - break; + usblp_unlink_urbs(usblp); + retval = usblp_set_protocol(usblp, arg); + if (retval < 0) { + usblp_set_protocol(usblp, + usblp->current_protocol); + } + break; - case IOCNR_HP_SET_CHANNEL: - if (_IOC_DIR(cmd) != _IOC_WRITE || - le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 || - usblp->quirks & USBLP_QUIRK_BIDIR) { - retval = -EINVAL; - goto done; - } + case IOCNR_HP_SET_CHANNEL: + if (_IOC_DIR(cmd) != _IOC_WRITE || + le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 || + usblp->quirks & USBLP_QUIRK_BIDIR) { + retval = -EINVAL; + goto done; + } - err = usblp_hp_channel_change_request(usblp, - arg, &newChannel); - if (err < 0) { - dev_err(&usblp->dev->dev, - "usblp%d: error = %d setting " - "HP channel\n", - usblp->minor, err); - retval = -EIO; - goto done; - } + err = usblp_hp_channel_change_request(usblp, + arg, &newChannel); + if (err < 0) { + dev_err(&usblp->dev->dev, + "usblp%d: error = %d setting " + "HP channel\n", + usblp->minor, err); + retval = -EIO; + goto done; + } - dbg("usblp%d requested/got HP channel %ld/%d", - usblp->minor, arg, newChannel); - break; + dbg("usblp%d requested/got HP channel %ld/%d", + usblp->minor, arg, newChannel); + break; - case IOCNR_GET_BUS_ADDRESS: - if (_IOC_DIR(cmd) != _IOC_READ || - _IOC_SIZE(cmd) < sizeof(twoints)) { - retval = -EINVAL; - goto done; - } + case IOCNR_GET_BUS_ADDRESS: + if (_IOC_DIR(cmd) != _IOC_READ || + _IOC_SIZE(cmd) < sizeof(twoints)) { + retval = -EINVAL; + goto done; + } - twoints[0] = usblp->dev->bus->busnum; - twoints[1] = usblp->dev->devnum; - if (copy_to_user((void __user *)arg, - (unsigned char *)twoints, - sizeof(twoints))) { - retval = -EFAULT; - goto done; - } + twoints[0] = usblp->dev->bus->busnum; + twoints[1] = usblp->dev->devnum; + if (copy_to_user((void __user *)arg, + (unsigned char *)twoints, + sizeof(twoints))) { + retval = -EFAULT; + goto done; + } - dbg("usblp%d is bus=%d, device=%d", - usblp->minor, twoints[0], twoints[1]); - break; + dbg("usblp%d is bus=%d, device=%d", + usblp->minor, twoints[0], twoints[1]); + break; - case IOCNR_GET_VID_PID: - if (_IOC_DIR(cmd) != _IOC_READ || - _IOC_SIZE(cmd) < sizeof(twoints)) { - retval = -EINVAL; - goto done; - } + case IOCNR_GET_VID_PID: + if (_IOC_DIR(cmd) != _IOC_READ || + _IOC_SIZE(cmd) < sizeof(twoints)) { + retval = -EINVAL; + goto done; + } - twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor); - twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct); - if (copy_to_user((void __user *)arg, - (unsigned char *)twoints, - sizeof(twoints))) { - retval = -EFAULT; - goto done; - } + twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor); + twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct); + if (copy_to_user((void __user *)arg, + (unsigned char *)twoints, + sizeof(twoints))) { + retval = -EFAULT; + goto done; + } - dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X", - usblp->minor, twoints[0], twoints[1]); - break; + dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X", + usblp->minor, twoints[0], twoints[1]); + break; - case IOCNR_SOFT_RESET: - if (_IOC_DIR(cmd) != _IOC_NONE) { - retval = -EINVAL; - goto done; - } - retval = usblp_reset(usblp); - break; - default: - retval = -ENOTTY; + case IOCNR_SOFT_RESET: + if (_IOC_DIR(cmd) != _IOC_NONE) { + retval = -EINVAL; + goto done; + } + retval = usblp_reset(usblp); + break; + default: + retval = -ENOTTY; } else /* old-style ioctl value */ switch (cmd) { - case LPGETSTATUS: - if ((retval = usblp_read_status(usblp, usblp->statusbuf))) { - if (printk_ratelimit()) - printk(KERN_ERR "usblp%d:" - "failed reading printer status (%d)\n", - usblp->minor, retval); - retval = -EIO; - goto done; - } - status = *usblp->statusbuf; - if (copy_to_user ((void __user *)arg, &status, sizeof(int))) - retval = -EFAULT; - break; + case LPGETSTATUS: + if ((retval = usblp_read_status(usblp, usblp->statusbuf))) { + if (printk_ratelimit()) + printk(KERN_ERR "usblp%d:" + "failed reading printer status (%d)\n", + usblp->minor, retval); + retval = -EIO; + goto done; + } + status = *usblp->statusbuf; + if (copy_to_user((void __user *)arg, &status, sizeof(int))) + retval = -EFAULT; + break; - case LPABORT: - if (arg) - usblp->flags |= LP_ABORT; - else - usblp->flags &= ~LP_ABORT; - break; + case LPABORT: + if (arg) + usblp->flags |= LP_ABORT; + else + usblp->flags &= ~LP_ABORT; + break; - default: - retval = -ENOTTY; + default: + retval = -ENOTTY; } done: - mutex_unlock (&usblp->mut); + mutex_unlock(&usblp->mut); return retval; } @@ -840,7 +839,7 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, lo } done: - mutex_unlock (&usblp->mut); + mutex_unlock(&usblp->mut); return count; } @@ -1023,7 +1022,7 @@ raise_urb: * while you are sending print data, and you don't try to query the * printer status every couple of milliseconds, you will probably be OK. */ -static unsigned int usblp_quirks (__u16 vendor, __u16 product) +static unsigned int usblp_quirks(__u16 vendor, __u16 product) { int i; @@ -1031,7 +1030,7 @@ static unsigned int usblp_quirks (__u16 vendor, __u16 product) if (vendor == quirk_printers[i].vendorId && product == quirk_printers[i].productId) return quirk_printers[i].quirks; - } + } return 0; } @@ -1061,7 +1060,7 @@ static struct usb_class_driver usblp_class = { static ssize_t usblp_show_ieee1284_id(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_interface *intf = to_usb_interface(dev); - struct usblp *usblp = usb_get_intfdata (intf); + struct usblp *usblp = usb_get_intfdata(intf); if (usblp->device_id_string[0] == 0 && usblp->device_id_string[1] == 0) @@ -1075,7 +1074,7 @@ static DEVICE_ATTR(ieee1284_id, S_IRUGO, usblp_show_ieee1284_id, NULL); static int usblp_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct usb_device *dev = interface_to_usbdev (intf); + struct usb_device *dev = interface_to_usbdev(intf); struct usblp *usblp; int protocol; int retval; @@ -1089,7 +1088,7 @@ static int usblp_probe(struct usb_interface *intf, } usblp->dev = dev; mutex_init(&usblp->wmut); - mutex_init (&usblp->mut); + mutex_init(&usblp->mut); spin_lock_init(&usblp->lock); init_waitqueue_head(&usblp->rwait); init_waitqueue_head(&usblp->wwait); @@ -1153,7 +1152,7 @@ static int usblp_probe(struct usb_interface *intf, usblp_check_status(usblp, 0); #endif - usb_set_intfdata (intf, usblp); + usb_set_intfdata(intf, usblp); usblp->present = 1; @@ -1177,7 +1176,7 @@ static int usblp_probe(struct usb_interface *intf, return 0; abort_intfdata: - usb_set_intfdata (intf, NULL); + usb_set_intfdata(intf, NULL); device_remove_file(&intf->dev, &dev_attr_ieee1284_id); abort: kfree(usblp->readbuf); @@ -1340,35 +1339,35 @@ static int usblp_cache_device_id_string(struct usblp *usblp) static void usblp_disconnect(struct usb_interface *intf) { - struct usblp *usblp = usb_get_intfdata (intf); + struct usblp *usblp = usb_get_intfdata(intf); usb_deregister_dev(intf, &usblp_class); if (!usblp || !usblp->dev) { dev_err(&intf->dev, "bogus disconnect\n"); - BUG (); + BUG(); } device_remove_file(&intf->dev, &dev_attr_ieee1284_id); - mutex_lock (&usblp_mutex); - mutex_lock (&usblp->mut); + mutex_lock(&usblp_mutex); + mutex_lock(&usblp->mut); usblp->present = 0; wake_up(&usblp->wwait); wake_up(&usblp->rwait); - usb_set_intfdata (intf, NULL); + usb_set_intfdata(intf, NULL); usblp_unlink_urbs(usblp); - mutex_unlock (&usblp->mut); + mutex_unlock(&usblp->mut); if (!usblp->used) - usblp_cleanup (usblp); - mutex_unlock (&usblp_mutex); + usblp_cleanup(usblp); + mutex_unlock(&usblp_mutex); } static int usblp_suspend(struct usb_interface *intf, pm_message_t message) { - struct usblp *usblp = usb_get_intfdata (intf); + struct usblp *usblp = usb_get_intfdata(intf); usblp_unlink_urbs(usblp); #if 0 /* XXX Do we want this? What if someone is reading, should we fail? */ @@ -1382,10 +1381,10 @@ static int usblp_suspend(struct usb_interface *intf, pm_message_t message) static int usblp_resume(struct usb_interface *intf) { - struct usblp *usblp = usb_get_intfdata (intf); + struct usblp *usblp = usb_get_intfdata(intf); int r; - r = handle_bidir (usblp); + r = handle_bidir(usblp); return r; } @@ -1401,7 +1400,7 @@ static const struct usb_device_id usblp_ids[] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, usblp_ids); +MODULE_DEVICE_TABLE(usb, usblp_ids); static struct usb_driver usblp_driver = { .name = "usblp", @@ -1426,8 +1425,8 @@ static void __exit usblp_exit(void) module_init(usblp_init); module_exit(usblp_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); module_param(proto_bias, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(proto_bias, "Favourite protocol number"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index c2f62a3..f1aaff6 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1668,13 +1668,10 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl) default: if (intf->dev.driver) driver = to_usb_driver(intf->dev.driver); - if (driver == NULL || driver->ioctl == NULL) { + if (driver == NULL || driver->unlocked_ioctl == NULL) { retval = -ENOTTY; } else { - /* keep API that guarantees BKL */ - lock_kernel(); - retval = driver->ioctl(intf, ctl->ioctl_code, buf); - unlock_kernel(); + retval = driver->unlocked_ioctl(intf, ctl->ioctl_code, buf); if (retval == -ENOIOCTLCMD) retval = -ENOTTY; } diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index a6bd53a..d7a4401 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1742,9 +1742,8 @@ static int usb_runtime_suspend(struct device *dev) } /* Prevent the parent from suspending immediately after */ - else if (udev->parent) { + else if (udev->parent) udev->parent->last_busy = jiffies; - } } /* Runtime suspend for a USB interface doesn't mean anything. */ @@ -1786,21 +1785,19 @@ static int usb_runtime_idle(struct device *dev) return 0; } -static struct dev_pm_ops usb_bus_pm_ops = { +static const struct dev_pm_ops usb_bus_pm_ops = { .runtime_suspend = usb_runtime_suspend, .runtime_resume = usb_runtime_resume, .runtime_idle = usb_runtime_idle, }; -#else - -#define usb_bus_pm_ops (*(struct dev_pm_ops *) NULL) - #endif /* CONFIG_USB_SUSPEND */ struct bus_type usb_bus_type = { .name = "usb", .match = usb_device_match, .uevent = usb_uevent, +#ifdef CONFIG_USB_SUSPEND .pm = &usb_bus_pm_ops, +#endif }; diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index 4f84a41..3788e73 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -96,16 +96,21 @@ static ssize_t show_ep_interval(struct device *dev, switch (usb_endpoint_type(ep->desc)) { case USB_ENDPOINT_XFER_CONTROL: - if (ep->udev->speed == USB_SPEED_HIGH) /* uframes per NAK */ + if (ep->udev->speed == USB_SPEED_HIGH) + /* uframes per NAK */ interval = ep->desc->bInterval; break; + case USB_ENDPOINT_XFER_ISOC: interval = 1 << (ep->desc->bInterval - 1); break; + case USB_ENDPOINT_XFER_BULK: - if (ep->udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */ + if (ep->udev->speed == USB_SPEED_HIGH && !in) + /* uframes per NAK */ interval = ep->desc->bInterval; break; + case USB_ENDPOINT_XFER_INT: if (ep->udev->speed == USB_SPEED_HIGH) interval = 1 << (ep->desc->bInterval - 1); diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index 9a34ccb..69ecd3c 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -105,8 +105,10 @@ int usb_choose_configuration(struct usb_device *udev) /* When the first config's first interface is one of Microsoft's * pet nonstandard Ethernet-over-USB protocols, ignore it unless * this kernel has enabled the necessary host side driver. + * But: Don't ignore it if it's the only config. */ - if (i == 0 && desc && (is_rndis(desc) || is_activesync(desc))) { + if (i == 0 && num_configs > 1 && desc && + (is_rndis(desc) || is_activesync(desc))) { #if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE) continue; #else diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 1cf2d1e..c3f9854 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -66,10 +66,7 @@ static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd, * vice versa. */ companion = NULL; - for (;;) { - companion = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, companion); - if (!companion) - break; + for_each_pci_dev(companion) { if (companion->bus != pdev->bus || PCI_SLOT(companion->devfn) != slot) continue; @@ -250,6 +247,9 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (retval != 0) goto err4; set_hs_companion(dev, hcd); + + if (pci_dev_run_wake(dev)) + pm_runtime_put_noidle(&dev->dev); return retval; err4: @@ -292,6 +292,17 @@ void usb_hcd_pci_remove(struct pci_dev *dev) if (!hcd) return; + if (pci_dev_run_wake(dev)) + pm_runtime_get_noresume(&dev->dev); + + /* Fake an interrupt request in order to give the driver a chance + * to test whether the controller hardware has been removed (e.g., + * cardbus physical eject). + */ + local_irq_disable(); + usb_hcd_irq(0, hcd); + local_irq_enable(); + usb_remove_hcd(hcd); if (hcd->driver->flags & HCD_MEMORY) { iounmap(hcd->regs); @@ -317,12 +328,34 @@ void usb_hcd_pci_shutdown(struct pci_dev *dev) if (!hcd) return; - if (hcd->driver->shutdown) + if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && + hcd->driver->shutdown) hcd->driver->shutdown(hcd); } EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown); -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM_OPS + +#ifdef CONFIG_PPC_PMAC +static void powermac_set_asic(struct pci_dev *pci_dev, int enable) +{ + /* Enanble or disable ASIC clocks for USB */ + if (machine_is(powermac)) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node(pci_dev); + if (of_node) + pmac_call_feature(PMAC_FTR_USB_ENABLE, + of_node, 0, enable); + } +} + +#else + +static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable) +{} + +#endif /* CONFIG_PPC_PMAC */ static int check_root_hub_suspended(struct device *dev) { @@ -337,7 +370,7 @@ static int check_root_hub_suspended(struct device *dev) return 0; } -static int hcd_pci_suspend(struct device *dev) +static int suspend_common(struct device *dev, bool do_wakeup) { struct pci_dev *pci_dev = to_pci_dev(dev); struct usb_hcd *hcd = pci_get_drvdata(pci_dev); @@ -352,13 +385,21 @@ static int hcd_pci_suspend(struct device *dev) if (retval) return retval; - /* We might already be suspended (runtime PM -- not yet written) */ - if (pci_dev->current_state != PCI_D0) - return retval; - if (hcd->driver->pci_suspend) { - retval = hcd->driver->pci_suspend(hcd); + /* Optimization: Don't suspend if a root-hub wakeup is + * pending and it would cause the HCD to wake up anyway. + */ + if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) + return -EBUSY; + retval = hcd->driver->pci_suspend(hcd, do_wakeup); suspend_report_result(hcd->driver->pci_suspend, retval); + + /* Check again in case wakeup raced with pci_suspend */ + if (retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) { + if (hcd->driver->pci_resume) + hcd->driver->pci_resume(hcd, false); + retval = -EBUSY; + } if (retval) return retval; } @@ -374,6 +415,48 @@ static int hcd_pci_suspend(struct device *dev) return retval; } +static int resume_common(struct device *dev, int event) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct usb_hcd *hcd = pci_get_drvdata(pci_dev); + int retval; + + if (hcd->state != HC_STATE_SUSPENDED) { + dev_dbg(dev, "can't resume, not suspended!\n"); + return 0; + } + + retval = pci_enable_device(pci_dev); + if (retval < 0) { + dev_err(dev, "can't re-enable after resume, %d!\n", retval); + return retval; + } + + pci_set_master(pci_dev); + + clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + + if (hcd->driver->pci_resume) { + if (event != PM_EVENT_AUTO_RESUME) + wait_for_companions(pci_dev, hcd); + + retval = hcd->driver->pci_resume(hcd, + event == PM_EVENT_RESTORE); + if (retval) { + dev_err(dev, "PCI post-resume error %d!\n", retval); + usb_hc_died(hcd); + } + } + return retval; +} + +#ifdef CONFIG_PM_SLEEP + +static int hcd_pci_suspend(struct device *dev) +{ + return suspend_common(dev, device_may_wakeup(dev)); +} + static int hcd_pci_suspend_noirq(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); @@ -408,16 +491,7 @@ static int hcd_pci_suspend_noirq(struct device *dev) return retval; } -#ifdef CONFIG_PPC_PMAC - /* Disable ASIC clocks for USB */ - if (machine_is(powermac)) { - struct device_node *of_node; - - of_node = pci_device_to_OF_node(pci_dev); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0); - } -#endif + powermac_set_asic(pci_dev, 0); return retval; } @@ -425,69 +499,63 @@ static int hcd_pci_resume_noirq(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); -#ifdef CONFIG_PPC_PMAC - /* Reenable ASIC clocks for USB */ - if (machine_is(powermac)) { - struct device_node *of_node; - - of_node = pci_device_to_OF_node(pci_dev); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, - of_node, 0, 1); - } -#endif + powermac_set_asic(pci_dev, 1); /* Go back to D0 and disable remote wakeup */ pci_back_from_sleep(pci_dev); return 0; } -static int resume_common(struct device *dev, bool hibernated) +static int hcd_pci_resume(struct device *dev) { - struct pci_dev *pci_dev = to_pci_dev(dev); - struct usb_hcd *hcd = pci_get_drvdata(pci_dev); - int retval; + return resume_common(dev, PM_EVENT_RESUME); +} - if (hcd->state != HC_STATE_SUSPENDED) { - dev_dbg(dev, "can't resume, not suspended!\n"); - return 0; - } +static int hcd_pci_restore(struct device *dev) +{ + return resume_common(dev, PM_EVENT_RESTORE); +} - retval = pci_enable_device(pci_dev); - if (retval < 0) { - dev_err(dev, "can't re-enable after resume, %d!\n", retval); - return retval; - } +#else - pci_set_master(pci_dev); +#define hcd_pci_suspend NULL +#define hcd_pci_suspend_noirq NULL +#define hcd_pci_resume_noirq NULL +#define hcd_pci_resume NULL +#define hcd_pci_restore NULL - clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); +#endif /* CONFIG_PM_SLEEP */ - if (hcd->driver->pci_resume) { - /* This call should be made only during system resume, - * not during runtime resume. - */ - wait_for_companions(pci_dev, hcd); +#ifdef CONFIG_PM_RUNTIME - retval = hcd->driver->pci_resume(hcd, hibernated); - if (retval) { - dev_err(dev, "PCI post-resume error %d!\n", retval); - usb_hc_died(hcd); - } - } +static int hcd_pci_runtime_suspend(struct device *dev) +{ + int retval; + + retval = suspend_common(dev, true); + if (retval == 0) + powermac_set_asic(to_pci_dev(dev), 0); + dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval); return retval; } -static int hcd_pci_resume(struct device *dev) +static int hcd_pci_runtime_resume(struct device *dev) { - return resume_common(dev, false); -} + int retval; -static int hcd_pci_restore(struct device *dev) -{ - return resume_common(dev, true); + powermac_set_asic(to_pci_dev(dev), 1); + retval = resume_common(dev, PM_EVENT_AUTO_RESUME); + dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval); + return retval; } +#else + +#define hcd_pci_runtime_suspend NULL +#define hcd_pci_runtime_resume NULL + +#endif /* CONFIG_PM_RUNTIME */ + const struct dev_pm_ops usb_hcd_pci_pm_ops = { .suspend = hcd_pci_suspend, .suspend_noirq = hcd_pci_suspend_noirq, @@ -501,7 +569,9 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = { .poweroff_noirq = hcd_pci_suspend_noirq, .restore_noirq = hcd_pci_resume_noirq, .restore = hcd_pci_restore, + .runtime_suspend = hcd_pci_runtime_suspend, + .runtime_resume = hcd_pci_runtime_resume, }; EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops); -#endif /* CONFIG_PM_SLEEP */ +#endif /* CONFIG_PM_OPS */ diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 12742f1..5cca00a 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -667,7 +667,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) unsigned long flags; char buffer[6]; /* Any root hubs with > 31 ports? */ - if (unlikely(!hcd->rh_registered)) + if (unlikely(!hcd->rh_pollable)) return; if (!hcd->uses_new_polling && !hcd->status_urb) return; @@ -679,7 +679,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) spin_lock_irqsave(&hcd_root_hub_lock, flags); urb = hcd->status_urb; if (urb) { - hcd->poll_pending = 0; + clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags); hcd->status_urb = NULL; urb->actual_length = length; memcpy(urb->transfer_buffer, buffer, length); @@ -690,7 +690,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) spin_lock(&hcd_root_hub_lock); } else { length = 0; - hcd->poll_pending = 1; + set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags); } spin_unlock_irqrestore(&hcd_root_hub_lock, flags); } @@ -699,7 +699,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) * exceed that limit if HZ is 100. The math is more clunky than * maybe expected, this is to make sure that all timers for USB devices * fire at the same time to give the CPU a break inbetween */ - if (hcd->uses_new_polling ? hcd->poll_rh : + if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) : (length == 0 && hcd->status_urb != NULL)) mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); } @@ -736,7 +736,7 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb) mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); /* If a status change has already occurred, report it ASAP */ - else if (hcd->poll_pending) + else if (HCD_POLL_PENDING(hcd)) mod_timer(&hcd->rh_timer, jiffies); retval = 0; done: @@ -1150,8 +1150,7 @@ int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, * finish unlinking the initial failed usb_set_address() * or device descriptor fetch. */ - if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) && - !is_root_hub(urb->dev)) { + if (!HCD_SAW_IRQ(hcd) && !is_root_hub(urb->dev)) { dev_warn(hcd->self.controller, "Unlink after no-IRQ? " "Controller is probably using the wrong IRQ.\n"); set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); @@ -1219,6 +1218,11 @@ static int hcd_alloc_coherent(struct usb_bus *bus, { unsigned char *vaddr; + if (*vaddr_handle == NULL) { + WARN_ON_ONCE(1); + return -EFAULT; + } + vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr), mem_flags, dma_handle); if (!vaddr) @@ -1941,6 +1945,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) dev_dbg(&rhdev->dev, "usb %s%s\n", (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume"); + clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); if (!hcd->driver->bus_resume) return -ENOENT; if (hcd->state == HC_STATE_RUNNING) @@ -1994,8 +1999,10 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) unsigned long flags; spin_lock_irqsave (&hcd_root_hub_lock, flags); - if (hcd->rh_registered) + if (hcd->rh_registered) { + set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); queue_work(pm_wq, &hcd->wakeup_work); + } spin_unlock_irqrestore (&hcd_root_hub_lock, flags); } EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); @@ -2063,8 +2070,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) */ local_irq_save(flags); - if (unlikely(hcd->state == HC_STATE_HALT || - !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) { + if (unlikely(hcd->state == HC_STATE_HALT || !HCD_HW_ACCESSIBLE(hcd))) { rc = IRQ_NONE; } else if (hcd->driver->irq(hcd) == IRQ_NONE) { rc = IRQ_NONE; @@ -2079,6 +2085,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) local_irq_restore(flags); return rc; } +EXPORT_SYMBOL_GPL(usb_hcd_irq); /*-------------------------------------------------------------------------*/ @@ -2098,7 +2105,7 @@ void usb_hc_died (struct usb_hcd *hcd) spin_lock_irqsave (&hcd_root_hub_lock, flags); if (hcd->rh_registered) { - hcd->poll_rh = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); /* make khubd clean up old urbs and devices */ usb_set_device_state (hcd->self.root_hub, @@ -2217,6 +2224,7 @@ int usb_add_hcd(struct usb_hcd *hcd, retval = -ENOMEM; goto err_allocate_root_hub; } + hcd->self.root_hub = rhdev; switch (hcd->driver->flags & HCD_MASK) { case HCD_USB11: @@ -2229,9 +2237,8 @@ int usb_add_hcd(struct usb_hcd *hcd, rhdev->speed = USB_SPEED_SUPER; break; default: - goto err_allocate_root_hub; + goto err_set_rh_speed; } - hcd->self.root_hub = rhdev; /* wakeup flag init defaults to "everything works" for root hubs, * but drivers can override it in reset() if needed, along with @@ -2246,6 +2253,7 @@ int usb_add_hcd(struct usb_hcd *hcd, dev_err(hcd->self.controller, "can't setup\n"); goto err_hcd_driver_setup; } + hcd->rh_pollable = 1; /* NOTE: root hub and controller capabilities may not be the same */ if (device_can_wakeup(hcd->self.controller) @@ -2300,23 +2308,38 @@ int usb_add_hcd(struct usb_hcd *hcd, retval); goto error_create_attr_group; } - if (hcd->uses_new_polling && hcd->poll_rh) + if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) usb_hcd_poll_rh_status(hcd); return retval; error_create_attr_group: + if (HC_IS_RUNNING(hcd->state)) + hcd->state = HC_STATE_QUIESCING; + spin_lock_irq(&hcd_root_hub_lock); + hcd->rh_registered = 0; + spin_unlock_irq(&hcd_root_hub_lock); + +#ifdef CONFIG_USB_SUSPEND + cancel_work_sync(&hcd->wakeup_work); +#endif mutex_lock(&usb_bus_list_lock); - usb_disconnect(&hcd->self.root_hub); + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ mutex_unlock(&usb_bus_list_lock); err_register_root_hub: + hcd->rh_pollable = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); hcd->driver->stop(hcd); + hcd->state = HC_STATE_HALT; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); err_hcd_driver_start: if (hcd->irq >= 0) free_irq(irqnum, hcd); err_request_irq: err_hcd_driver_setup: - hcd->self.root_hub = NULL; - usb_put_dev(rhdev); +err_set_rh_speed: + usb_put_dev(hcd->self.root_hub); err_allocate_root_hub: usb_deregister_bus(&hcd->self); err_register_bus: @@ -2335,8 +2358,13 @@ EXPORT_SYMBOL_GPL(usb_add_hcd); */ void usb_remove_hcd(struct usb_hcd *hcd) { + struct usb_device *rhdev = hcd->self.root_hub; + dev_info(hcd->self.controller, "remove, state %x\n", hcd->state); + usb_get_dev(rhdev); + sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group); + if (HC_IS_RUNNING (hcd->state)) hcd->state = HC_STATE_QUIESCING; @@ -2349,19 +2377,30 @@ void usb_remove_hcd(struct usb_hcd *hcd) cancel_work_sync(&hcd->wakeup_work); #endif - sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group); mutex_lock(&usb_bus_list_lock); - usb_disconnect(&hcd->self.root_hub); + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ mutex_unlock(&usb_bus_list_lock); + /* Prevent any more root-hub status calls from the timer. + * The HCD might still restart the timer (if a port status change + * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke + * the hub_status_data() callback. + */ + hcd->rh_pollable = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + hcd->driver->stop(hcd); hcd->state = HC_STATE_HALT; - hcd->poll_rh = 0; + /* In case the HCD restarted the timer, stop it again. */ + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); del_timer_sync(&hcd->rh_timer); if (hcd->irq >= 0) free_irq(hcd->irq, hcd); + + usb_put_dev(hcd->self.root_hub); usb_deregister_bus(&hcd->self); hcd_buffer_destroy(hcd); } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 70cccc7..84c18971 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -20,6 +20,7 @@ #include <linux/usb.h> #include <linux/usbdevice_fs.h> #include <linux/usb/hcd.h> +#include <linux/usb/quirks.h> #include <linux/kthread.h> #include <linux/mutex.h> #include <linux/freezer.h> @@ -1294,6 +1295,7 @@ descriptor_error: return -ENODEV; } +/* No BKL needed */ static int hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data) { @@ -1801,7 +1803,6 @@ int usb_new_device(struct usb_device *udev) pm_runtime_set_active(&udev->dev); pm_runtime_enable(&udev->dev); - usb_detect_quirks(udev); err = usb_enumerate_device(udev); /* Read descriptors */ if (err < 0) goto fail; @@ -2880,7 +2881,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, } retval = 0; - + /* notify HCD that we have a device connected and addressed */ + if (hcd->driver->update_device) + hcd->driver->update_device(hcd, udev); fail: if (retval) { hub_port_disable(hub, port1, 0); @@ -3111,6 +3114,10 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (status < 0) goto loop; + usb_detect_quirks(udev); + if (udev->quirks & USB_QUIRK_DELAY_INIT) + msleep(1000); + /* consecutive bus-powered hubs aren't reliable; they can * violate the voltage drop budget. if the new child has * a "powered" LED, users should notice we didn't enable it @@ -3463,7 +3470,7 @@ static struct usb_driver hub_driver = { .reset_resume = hub_reset_resume, .pre_reset = hub_pre_reset, .post_reset = hub_post_reset, - .ioctl = hub_ioctl, + .unlocked_ioctl = hub_ioctl, .id_table = hub_id_table, .supports_autosuspend = 1, }; diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 1a27618..095fa53 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -265,13 +265,9 @@ static int remount(struct super_block *sb, int *flags, char *data) return -EINVAL; } - lock_kernel(); - if (usbfs_mount && usbfs_mount->mnt_sb) update_sb(usbfs_mount->mnt_sb); - unlock_kernel(); - return 0; } diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index db99c08..25719da 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -38,6 +38,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Harmony 700-series */ + { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Philips PSC805 audio device */ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 7c05555..419e6b3 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -137,6 +137,16 @@ void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor) } EXPORT_SYMBOL_GPL(usb_anchor_urb); +/* Callers must hold anchor->lock */ +static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor) +{ + urb->anchor = NULL; + list_del(&urb->anchor_list); + usb_put_urb(urb); + if (list_empty(&anchor->urb_list)) + wake_up(&anchor->wait); +} + /** * usb_unanchor_urb - unanchors an URB * @urb: pointer to the urb to anchor @@ -156,17 +166,14 @@ void usb_unanchor_urb(struct urb *urb) return; spin_lock_irqsave(&anchor->lock, flags); - if (unlikely(anchor != urb->anchor)) { - /* we've lost the race to another thread */ - spin_unlock_irqrestore(&anchor->lock, flags); - return; - } - urb->anchor = NULL; - list_del(&urb->anchor_list); + /* + * At this point, we could be competing with another thread which + * has the same intention. To protect the urb from being unanchored + * twice, only the winner of the race gets the job. + */ + if (likely(anchor == urb->anchor)) + __usb_unanchor_urb(urb, anchor); spin_unlock_irqrestore(&anchor->lock, flags); - usb_put_urb(urb); - if (list_empty(&anchor->urb_list)) - wake_up(&anchor->wait); } EXPORT_SYMBOL_GPL(usb_unanchor_urb); @@ -749,20 +756,11 @@ EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs); void usb_unlink_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; - unsigned long flags; - spin_lock_irqsave(&anchor->lock, flags); - while (!list_empty(&anchor->urb_list)) { - victim = list_entry(anchor->urb_list.prev, struct urb, - anchor_list); - usb_get_urb(victim); - spin_unlock_irqrestore(&anchor->lock, flags); - /* this will unanchor the URB */ + while ((victim = usb_get_from_anchor(anchor)) != NULL) { usb_unlink_urb(victim); usb_put_urb(victim); - spin_lock_irqsave(&anchor->lock, flags); } - spin_unlock_irqrestore(&anchor->lock, flags); } EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs); @@ -799,12 +797,11 @@ struct urb *usb_get_from_anchor(struct usb_anchor *anchor) victim = list_entry(anchor->urb_list.next, struct urb, anchor_list); usb_get_urb(victim); - spin_unlock_irqrestore(&anchor->lock, flags); - usb_unanchor_urb(victim); + __usb_unanchor_urb(victim, anchor); } else { - spin_unlock_irqrestore(&anchor->lock, flags); victim = NULL; } + spin_unlock_irqrestore(&anchor->lock, flags); return victim; } @@ -826,12 +823,7 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor) while (!list_empty(&anchor->urb_list)) { victim = list_entry(anchor->urb_list.prev, struct urb, anchor_list); - usb_get_urb(victim); - spin_unlock_irqrestore(&anchor->lock, flags); - /* this may free the URB */ - usb_unanchor_urb(victim); - usb_put_urb(victim); - spin_lock_irqsave(&anchor->lock, flags); + __usb_unanchor_urb(victim, anchor); } spin_unlock_irqrestore(&anchor->lock, flags); } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 5ae14f6..fdd4130 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -317,10 +317,6 @@ static const struct dev_pm_ops usb_device_pm_ops = { .restore = usb_dev_restore, }; -#else - -#define usb_device_pm_ops (*(struct dev_pm_ops *) NULL) - #endif /* CONFIG_PM */ @@ -338,7 +334,9 @@ struct device_type usb_device_type = { .release = usb_release_dev, .uevent = usb_dev_uevent, .devnode = usb_devnode, +#ifdef CONFIG_PM .pm = &usb_device_pm_ops, +#endif }; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 591ae9f..cd27f9b 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -714,6 +714,7 @@ config USB_GADGETFS config USB_FUNCTIONFS tristate "Function Filesystem (EXPERIMENTAL)" depends on EXPERIMENTAL + select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS) help The Function Filesystem (FunctioFS) lets one create USB composite functions in user space in the same way as GadgetFS @@ -722,31 +723,31 @@ config USB_FUNCTIONFS implemented in kernel space (for instance Ethernet, serial or mass storage) and other are implemented in user space. + If you say "y" or "m" here you will be able what kind of + configurations the gadget will provide. + Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_ffs". config USB_FUNCTIONFS_ETH - bool "Include CDC ECM (Ethernet) function" + bool "Include configuration with CDC ECM (Ethernet)" depends on USB_FUNCTIONFS && NET help - Include an CDC ECM (Ethernet) funcion in the CDC ECM (Funcion) - Filesystem. If you also say "y" to the RNDIS query below the - gadget will have two configurations. + Include a configuration with CDC ECM funcion (Ethernet) and the + Funcion Filesystem. config USB_FUNCTIONFS_RNDIS - bool "Include RNDIS (Ethernet) function" + bool "Include configuration with RNDIS (Ethernet)" depends on USB_FUNCTIONFS && NET help - Include an RNDIS (Ethernet) funcion in the Funcion Filesystem. - If you also say "y" to the CDC ECM query above the gadget will - have two configurations. + Include a configuration with RNDIS funcion (Ethernet) and the Filesystem. config USB_FUNCTIONFS_GENERIC bool "Include 'pure' configuration" - depends on USB_FUNCTIONFS && (USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS) + depends on USB_FUNCTIONFS help - Include a configuration with FunctionFS and no Ethernet - configuration. + Include a configuration with the Function Filesystem alone with + no Ethernet interface. config USB_FILE_STORAGE tristate "File-backed Storage Gadget" @@ -863,6 +864,7 @@ config USB_G_NOKIA config USB_G_MULTI tristate "Multifunction Composite Gadget (EXPERIMENTAL)" depends on BLOCK && NET + select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS help The Multifunction Composite Gadget provides Ethernet (RNDIS and/or CDC Ethernet), mass storage and ACM serial link @@ -913,6 +915,34 @@ config USB_G_HID Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_hid". +config USB_G_DBGP + tristate "EHCI Debug Device Gadget" + help + This gadget emulates an EHCI Debug device. This is useful when you want + to interact with an EHCI Debug Port. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_dbgp". + +if USB_G_DBGP +choice + prompt "EHCI Debug Device mode" + default USB_G_DBGP_SERIAL + +config USB_G_DBGP_PRINTK + depends on USB_G_DBGP + bool "printk" + help + Directly printk() received data. No interaction. + +config USB_G_DBGP_SERIAL + depends on USB_G_DBGP + bool "serial" + help + Userland can interact using /dev/ttyGSxxx. +endchoice +endif + # put drivers that need isochronous transfer support (for audio # or video class gadget drivers), or specific hardware, here. config USB_G_WEBCAM diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 9bcde11..27283df 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -44,6 +44,7 @@ g_printer-objs := printer.o g_cdc-objs := cdc2.o g_multi-objs := multi.o g_hid-objs := hid.o +g_dbgp-objs := dbgp.o g_nokia-objs := nokia.o g_webcam-objs := webcam.o @@ -52,7 +53,6 @@ obj-$(CONFIG_USB_AUDIO) += g_audio.o obj-$(CONFIG_USB_ETH) += g_ether.o obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o obj-$(CONFIG_USB_FUNCTIONFS) += g_ffs.o -obj-$(CONFIG_USB_ETH_FUNCTIONFS) += g_eth_ffs.o obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o obj-$(CONFIG_USB_G_SERIAL) += g_serial.o @@ -60,6 +60,7 @@ obj-$(CONFIG_USB_G_PRINTER) += g_printer.o obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o obj-$(CONFIG_USB_G_HID) += g_hid.o +obj-$(CONFIG_USB_G_DBGP) += g_dbgp.o obj-$(CONFIG_USB_G_MULTI) += g_multi.o obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c index a62af7b..b744ccd 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/audio.c @@ -89,7 +89,7 @@ static const struct usb_descriptor_header *otg_desc[] = { /*-------------------------------------------------------------------------*/ -static int __init audio_do_config(struct usb_configuration *c) +static int __ref audio_do_config(struct usb_configuration *c) { /* FIXME alloc iConfiguration string, set it in c->strings */ @@ -113,7 +113,7 @@ static struct usb_configuration audio_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init audio_bind(struct usb_composite_dev *cdev) +static int __ref audio_bind(struct usb_composite_dev *cdev) { int gcnum; int status; diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c index 928137d..1f5ba2f 100644 --- a/drivers/usb/gadget/cdc2.c +++ b/drivers/usb/gadget/cdc2.c @@ -129,7 +129,7 @@ static u8 hostaddr[ETH_ALEN]; /* * We _always_ have both CDC ECM and CDC ACM functions. */ -static int __init cdc_do_config(struct usb_configuration *c) +static int __ref cdc_do_config(struct usb_configuration *c) { int status; @@ -159,7 +159,7 @@ static struct usb_configuration cdc_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init cdc_bind(struct usb_composite_dev *cdev) +static int __ref cdc_bind(struct usb_composite_dev *cdev) { int gcnum; struct usb_gadget *gadget = cdev->gadget; diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 391d169..e483f80 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -673,20 +673,83 @@ static int get_string(struct usb_composite_dev *cdev, * string IDs. Drivers for functions, configurations, or gadgets will * then store that ID in the appropriate descriptors and string table. * - * All string identifier should be allocated using this routine, to - * ensure that for example different functions don't wrongly assign - * different meanings to the same identifier. + * All string identifier should be allocated using this, + * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure + * that for example different functions don't wrongly assign different + * meanings to the same identifier. */ int usb_string_id(struct usb_composite_dev *cdev) { if (cdev->next_string_id < 254) { - /* string id 0 is reserved */ + /* string id 0 is reserved by USB spec for list of + * supported languages */ + /* 255 reserved as well? -- mina86 */ cdev->next_string_id++; return cdev->next_string_id; } return -ENODEV; } +/** + * usb_string_ids() - allocate unused string IDs in batch + * @cdev: the device whose string descriptor IDs are being allocated + * @str: an array of usb_string objects to assign numbers to + * Context: single threaded during gadget setup + * + * @usb_string_ids() is called from bind() callbacks to allocate + * string IDs. Drivers for functions, configurations, or gadgets will + * then copy IDs from the string table to the appropriate descriptors + * and string table for other languages. + * + * All string identifier should be allocated using this, + * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for + * example different functions don't wrongly assign different meanings + * to the same identifier. + */ +int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str) +{ + int next = cdev->next_string_id; + + for (; str->s; ++str) { + if (unlikely(next >= 254)) + return -ENODEV; + str->id = ++next; + } + + cdev->next_string_id = next; + + return 0; +} + +/** + * usb_string_ids_n() - allocate unused string IDs in batch + * @cdev: the device whose string descriptor IDs are being allocated + * @n: number of string IDs to allocate + * Context: single threaded during gadget setup + * + * Returns the first requested ID. This ID and next @n-1 IDs are now + * valid IDs. At least providind that @n is non zore because if it + * is, returns last requested ID which is now very useful information. + * + * @usb_string_ids_n() is called from bind() callbacks to allocate + * string IDs. Drivers for functions, configurations, or gadgets will + * then store that ID in the appropriate descriptors and string table. + * + * All string identifier should be allocated using this, + * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for + * example different functions don't wrongly assign different meanings + * to the same identifier. + */ +int usb_string_ids_n(struct usb_composite_dev *c, unsigned n) +{ + unsigned next = c->next_string_id; + if (unlikely(n > 254 || (unsigned)next + n > 254)) + return -ENODEV; + c->next_string_id += n; + return next + 1; +} + + /*-------------------------------------------------------------------------*/ static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req) @@ -893,6 +956,8 @@ static void composite_disconnect(struct usb_gadget *gadget) spin_lock_irqsave(&cdev->lock, flags); if (cdev->config) reset_config(cdev); + if (composite->disconnect) + composite->disconnect(cdev); spin_unlock_irqrestore(&cdev->lock, flags); } diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c new file mode 100644 index 0000000..0ed50a2 --- /dev/null +++ b/drivers/usb/gadget/dbgp.c @@ -0,0 +1,434 @@ +/* + * dbgp.c -- EHCI Debug Port device gadget + * + * Copyright (C) 2010 Stephane Duverger + * + * Released under the GPLv2. + * + */ + +/* verbose messages */ +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +/* See comments in "zero.c" */ +#include "epautoconf.c" + +#ifdef CONFIG_USB_G_DBGP_SERIAL +#include "u_serial.c" +#endif + +#define DRIVER_VENDOR_ID 0x0525 /* NetChip */ +#define DRIVER_PRODUCT_ID 0xc0de /* undefined */ + +#define USB_DEBUG_MAX_PACKET_SIZE 8 +#define DBGP_REQ_EP0_LEN 128 +#define DBGP_REQ_LEN 512 + +static struct dbgp { + struct usb_gadget *gadget; + struct usb_request *req; + struct usb_ep *i_ep; + struct usb_ep *o_ep; +#ifdef CONFIG_USB_G_DBGP_SERIAL + struct gserial *serial; +#endif +} dbgp; + +static struct usb_device_descriptor device_desc = { + .bLength = sizeof device_desc, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = __constant_cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_VENDOR_SPEC, + .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_ID), + .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_ID), + .bNumConfigurations = 1, +}; + +static struct usb_debug_descriptor dbg_desc = { + .bLength = sizeof dbg_desc, + .bDescriptorType = USB_DT_DEBUG, +}; + +static struct usb_endpoint_descriptor i_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .bEndpointAddress = USB_DIR_IN, +}; + +static struct usb_endpoint_descriptor o_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .bEndpointAddress = USB_DIR_OUT, +}; + +#ifdef CONFIG_USB_G_DBGP_PRINTK +static int dbgp_consume(char *buf, unsigned len) +{ + char c; + + if (!len) + return 0; + + c = buf[len-1]; + if (c != 0) + buf[len-1] = 0; + + printk(KERN_NOTICE "%s%c", buf, c); + return 0; +} + +static void __disable_ep(struct usb_ep *ep) +{ + if (ep && ep->driver_data == dbgp.gadget) { + usb_ep_disable(ep); + ep->driver_data = NULL; + } +} + +static void dbgp_disable_ep(void) +{ + __disable_ep(dbgp.i_ep); + __disable_ep(dbgp.o_ep); +} + +static void dbgp_complete(struct usb_ep *ep, struct usb_request *req) +{ + int stp; + int err = 0; + int status = req->status; + + if (ep == dbgp.i_ep) { + stp = 1; + goto fail; + } + + if (status != 0) { + stp = 2; + goto release_req; + } + + dbgp_consume(req->buf, req->actual); + + req->length = DBGP_REQ_LEN; + err = usb_ep_queue(ep, req, GFP_ATOMIC); + if (err < 0) { + stp = 3; + goto release_req; + } + + return; + +release_req: + kfree(req->buf); + usb_ep_free_request(dbgp.o_ep, req); + dbgp_disable_ep(); +fail: + dev_dbg(&dbgp.gadget->dev, + "complete: failure (%d:%d) ==> %d\n", stp, err, status); +} + +static int dbgp_enable_ep_req(struct usb_ep *ep) +{ + int err, stp; + struct usb_request *req; + + req = usb_ep_alloc_request(ep, GFP_KERNEL); + if (!req) { + err = -ENOMEM; + stp = 1; + goto fail_1; + } + + req->buf = kmalloc(DBGP_REQ_LEN, GFP_KERNEL); + if (!req->buf) { + err = -ENOMEM; + stp = 2; + goto fail_2; + } + + req->complete = dbgp_complete; + req->length = DBGP_REQ_LEN; + err = usb_ep_queue(ep, req, GFP_ATOMIC); + if (err < 0) { + stp = 3; + goto fail_3; + } + + return 0; + +fail_3: + kfree(req->buf); +fail_2: + usb_ep_free_request(dbgp.o_ep, req); +fail_1: + dev_dbg(&dbgp.gadget->dev, + "enable ep req: failure (%d:%d)\n", stp, err); + return err; +} + +static int __enable_ep(struct usb_ep *ep, struct usb_endpoint_descriptor *desc) +{ + int err = usb_ep_enable(ep, desc); + ep->driver_data = dbgp.gadget; + return err; +} + +static int dbgp_enable_ep(void) +{ + int err, stp; + + err = __enable_ep(dbgp.i_ep, &i_desc); + if (err < 0) { + stp = 1; + goto fail_1; + } + + err = __enable_ep(dbgp.o_ep, &o_desc); + if (err < 0) { + stp = 2; + goto fail_2; + } + + err = dbgp_enable_ep_req(dbgp.o_ep); + if (err < 0) { + stp = 3; + goto fail_3; + } + + return 0; + +fail_3: + __disable_ep(dbgp.o_ep); +fail_2: + __disable_ep(dbgp.i_ep); +fail_1: + dev_dbg(&dbgp.gadget->dev, "enable ep: failure (%d:%d)\n", stp, err); + return err; +} +#endif + +static void dbgp_disconnect(struct usb_gadget *gadget) +{ +#ifdef CONFIG_USB_G_DBGP_PRINTK + dbgp_disable_ep(); +#else + gserial_disconnect(dbgp.serial); +#endif +} + +static void dbgp_unbind(struct usb_gadget *gadget) +{ +#ifdef CONFIG_USB_G_DBGP_SERIAL + kfree(dbgp.serial); +#endif + if (dbgp.req) { + kfree(dbgp.req->buf); + usb_ep_free_request(gadget->ep0, dbgp.req); + } + + gadget->ep0->driver_data = NULL; +} + +static int __init dbgp_configure_endpoints(struct usb_gadget *gadget) +{ + int stp; + + usb_ep_autoconfig_reset(gadget); + + dbgp.i_ep = usb_ep_autoconfig(gadget, &i_desc); + if (!dbgp.i_ep) { + stp = 1; + goto fail_1; + } + + dbgp.i_ep->driver_data = gadget; + i_desc.wMaxPacketSize = + __constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE); + + dbgp.o_ep = usb_ep_autoconfig(gadget, &o_desc); + if (!dbgp.o_ep) { + dbgp.i_ep->driver_data = NULL; + stp = 2; + goto fail_2; + } + + dbgp.o_ep->driver_data = gadget; + o_desc.wMaxPacketSize = + __constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE); + + dbg_desc.bDebugInEndpoint = i_desc.bEndpointAddress & 0x7f; + dbg_desc.bDebugOutEndpoint = o_desc.bEndpointAddress & 0x7f; + +#ifdef CONFIG_USB_G_DBGP_SERIAL + dbgp.serial->in = dbgp.i_ep; + dbgp.serial->out = dbgp.o_ep; + + dbgp.serial->in_desc = &i_desc; + dbgp.serial->out_desc = &o_desc; + + if (gserial_setup(gadget, 1) < 0) { + stp = 3; + goto fail_3; + } + + return 0; + +fail_3: + dbgp.o_ep->driver_data = NULL; +#else + return 0; +#endif +fail_2: + dbgp.i_ep->driver_data = NULL; +fail_1: + dev_dbg(&dbgp.gadget->dev, "ep config: failure (%d)\n", stp); + return -ENODEV; +} + +static int __init dbgp_bind(struct usb_gadget *gadget) +{ + int err, stp; + + dbgp.gadget = gadget; + + dbgp.req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); + if (!dbgp.req) { + err = -ENOMEM; + stp = 1; + goto fail; + } + + dbgp.req->buf = kmalloc(DBGP_REQ_EP0_LEN, GFP_KERNEL); + if (!dbgp.req->buf) { + err = -ENOMEM; + stp = 2; + goto fail; + } + + dbgp.req->length = DBGP_REQ_EP0_LEN; + gadget->ep0->driver_data = gadget; + +#ifdef CONFIG_USB_G_DBGP_SERIAL + dbgp.serial = kzalloc(sizeof(struct gserial), GFP_KERNEL); + if (!dbgp.serial) { + stp = 3; + err = -ENOMEM; + goto fail; + } +#endif + err = dbgp_configure_endpoints(gadget); + if (err < 0) { + stp = 4; + goto fail; + } + + dev_dbg(&dbgp.gadget->dev, "bind: success\n"); + return 0; + +fail: + dev_dbg(&gadget->dev, "bind: failure (%d:%d)\n", stp, err); + dbgp_unbind(gadget); + return err; +} + +static void dbgp_setup_complete(struct usb_ep *ep, + struct usb_request *req) +{ + dev_dbg(&dbgp.gadget->dev, "setup complete: %d, %d/%d\n", + req->status, req->actual, req->length); +} + +static int dbgp_setup(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl) +{ + struct usb_request *req = dbgp.req; + u8 request = ctrl->bRequest; + u16 value = le16_to_cpu(ctrl->wValue); + u16 length = le16_to_cpu(ctrl->wLength); + int err = 0; + void *data; + u16 len; + + gadget->ep0->driver_data = gadget; + + if (request == USB_REQ_GET_DESCRIPTOR) { + switch (value>>8) { + case USB_DT_DEVICE: + dev_dbg(&dbgp.gadget->dev, "setup: desc device\n"); + len = sizeof device_desc; + data = &device_desc; + break; + case USB_DT_DEBUG: + dev_dbg(&dbgp.gadget->dev, "setup: desc debug\n"); + len = sizeof dbg_desc; + data = &dbg_desc; + break; + default: + goto fail; + } + } else if (request == USB_REQ_SET_FEATURE && + value == USB_DEVICE_DEBUG_MODE) { + len = 0; + data = NULL; + dev_dbg(&dbgp.gadget->dev, "setup: feat debug\n"); +#ifdef CONFIG_USB_G_DBGP_PRINTK + err = dbgp_enable_ep(); +#else + err = gserial_connect(dbgp.serial, 0); +#endif + if (err < 0) + goto fail; + } else + goto fail; + + if (len >= 0) { + req->length = min(length, len); + req->zero = len < req->length; + if (data && req->length) + memcpy(req->buf, data, req->length); + + req->complete = dbgp_setup_complete; + return usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); + } + +fail: + dev_dbg(&dbgp.gadget->dev, + "setup: failure req %x v %x\n", request, value); + return err; +} + +static struct usb_gadget_driver dbgp_driver = { + .function = "dbgp", + .speed = USB_SPEED_HIGH, + .bind = dbgp_bind, + .unbind = dbgp_unbind, + .setup = dbgp_setup, + .disconnect = dbgp_disconnect, + .driver = { + .owner = THIS_MODULE, + .name = "dbgp" + }, +}; + +static int __init dbgp_init(void) +{ + return usb_gadget_register_driver(&dbgp_driver); +} + +static void __exit dbgp_exit(void) +{ + usb_gadget_unregister_driver(&dbgp_driver); +#ifdef CONFIG_USB_G_DBGP_SERIAL + gserial_cleanup(); +#endif +} + +MODULE_AUTHOR("Stephane Duverger"); +MODULE_LICENSE("GPL"); +module_init(dbgp_init); +module_exit(dbgp_exit); diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 4f9e578..dc65462 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1542,7 +1542,7 @@ static int dummy_hub_status (struct usb_hcd *hcd, char *buf) dum = hcd_to_dummy (hcd); spin_lock_irqsave (&dum->lock, flags); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) goto done; if (dum->resuming && time_after_eq (jiffies, dum->re_timeout)) { @@ -1588,7 +1588,7 @@ static int dummy_hub_control ( int retval = 0; unsigned long flags; - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) return -ETIMEDOUT; dum = hcd_to_dummy (hcd); @@ -1739,7 +1739,7 @@ static int dummy_bus_resume (struct usb_hcd *hcd) dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__); spin_lock_irq (&dum->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { rc = -ESHUTDOWN; } else { dum->rh_state = DUMMY_RH_RUNNING; diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 400f8037..114fa02 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -237,7 +237,7 @@ static u8 hostaddr[ETH_ALEN]; * the first one present. That's to make Microsoft's drivers happy, * and to follow DOCSIS 1.0 (cable modem standard). */ -static int __init rndis_do_config(struct usb_configuration *c) +static int __ref rndis_do_config(struct usb_configuration *c) { /* FIXME alloc iConfiguration string, set it in c->strings */ @@ -270,7 +270,7 @@ MODULE_PARM_DESC(use_eem, "use CDC EEM mode"); /* * We _always_ have an ECM, CDC Subset, or EEM configuration. */ -static int __init eth_do_config(struct usb_configuration *c) +static int __ref eth_do_config(struct usb_configuration *c) { /* FIXME alloc iConfiguration string, set it in c->strings */ @@ -297,7 +297,7 @@ static struct usb_configuration eth_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init eth_bind(struct usb_composite_dev *cdev) +static int __ref eth_bind(struct usb_composite_dev *cdev) { int gcnum; struct usb_gadget *gadget = cdev->gadget; diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 2aaa0f7..e4f5950 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -714,9 +714,7 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value) struct ffs_function *func = ffs->func; ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV; } else if (gadget->ops->ioctl) { - lock_kernel(); ret = gadget->ops->ioctl(gadget, code, value); - unlock_kernel(); } else { ret = -ENOTTY; } @@ -1377,7 +1375,8 @@ static void ffs_data_reset(struct ffs_data *ffs) static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev) { - unsigned i, count; + struct usb_gadget_strings **lang; + int first_id; ENTER(); @@ -1385,7 +1384,9 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev) || test_and_set_bit(FFS_FL_BOUND, &ffs->flags))) return -EBADFD; - ffs_data_get(ffs); + first_id = usb_string_ids_n(cdev, ffs->strings_count); + if (unlikely(first_id < 0)) + return first_id; ffs->ep0req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL); if (unlikely(!ffs->ep0req)) @@ -1393,25 +1394,16 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev) ffs->ep0req->complete = ffs_ep0_complete; ffs->ep0req->context = ffs; - /* Get strings identifiers */ - for (count = ffs->strings_count, i = 0; i < count; ++i) { - struct usb_gadget_strings **lang; - - int id = usb_string_id(cdev); - if (unlikely(id < 0)) { - usb_ep_free_request(cdev->gadget->ep0, ffs->ep0req); - ffs->ep0req = NULL; - return id; - } - - lang = ffs->stringtabs; - do { - (*lang)->strings[i].id = id; - ++lang; - } while (*lang); + lang = ffs->stringtabs; + for (lang = ffs->stringtabs; *lang; ++lang) { + struct usb_string *str = (*lang)->strings; + int id = first_id; + for (; str->s; ++id, ++str) + str->id = id; } ffs->gadget = cdev->gadget; + ffs_data_get(ffs); return 0; } @@ -1480,9 +1472,9 @@ static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count) } -static int functionfs_add(struct usb_composite_dev *cdev, - struct usb_configuration *c, - struct ffs_data *ffs) +static int functionfs_bind_config(struct usb_composite_dev *cdev, + struct usb_configuration *c, + struct ffs_data *ffs) { struct ffs_function *func; int ret; diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 1e00ff9..53e1202 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -142,7 +142,7 @@ static struct usb_descriptor_header *hidg_fs_descriptors[] = { static ssize_t f_hidg_read(struct file *file, char __user *buffer, size_t count, loff_t *ptr) { - struct f_hidg *hidg = (struct f_hidg *)file->private_data; + struct f_hidg *hidg = file->private_data; char *tmp_buff = NULL; unsigned long flags; @@ -200,7 +200,7 @@ static void f_hidg_req_complete(struct usb_ep *ep, struct usb_request *req) static ssize_t f_hidg_write(struct file *file, const char __user *buffer, size_t count, loff_t *offp) { - struct f_hidg *hidg = (struct f_hidg *)file->private_data; + struct f_hidg *hidg = file->private_data; ssize_t status = -ENOMEM; if (!access_ok(VERIFY_READ, buffer, count)) @@ -257,7 +257,7 @@ static ssize_t f_hidg_write(struct file *file, const char __user *buffer, static unsigned int f_hidg_poll(struct file *file, poll_table *wait) { - struct f_hidg *hidg = (struct f_hidg *)file->private_data; + struct f_hidg *hidg = file->private_data; unsigned int ret = 0; poll_wait(file, &hidg->read_queue, wait); diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index e91d1b1..4322587 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -324,7 +324,7 @@ static void loopback_disable(struct usb_function *f) /*-------------------------------------------------------------------------*/ -static int __init loopback_bind_config(struct usb_configuration *c) +static int __ref loopback_bind_config(struct usb_configuration *c) { struct f_loopback *loop; int status; @@ -346,7 +346,7 @@ static int __init loopback_bind_config(struct usb_configuration *c) return status; } -static struct usb_configuration loopback_driver = { +static struct usb_configuration loopback_driver = { .label = "loopback", .strings = loopback_strings, .bind = loopback_bind_config, diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 4ce899c..32cce02 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -316,6 +316,27 @@ static const char fsg_string_interface[] = "Mass Storage"; /*-------------------------------------------------------------------------*/ struct fsg_dev; +struct fsg_common; + +/* FSF callback functions */ +struct fsg_operations { + /* Callback function to call when thread exits. If no + * callback is set or it returns value lower then zero MSF + * will force eject all LUNs it operates on (including those + * marked as non-removable or with prevent_medium_removal flag + * set). */ + int (*thread_exits)(struct fsg_common *common); + + /* Called prior to ejection. Negative return means error, + * zero means to continue with ejection, positive means not to + * eject. */ + int (*pre_eject)(struct fsg_common *common, + struct fsg_lun *lun, int num); + /* Called after ejection. Negative return means error, zero + * or positive is just a success. */ + int (*post_eject)(struct fsg_common *common, + struct fsg_lun *lun, int num); +}; /* Data shared by all the FSG instances. */ @@ -333,7 +354,6 @@ struct fsg_common { struct usb_ep *ep0; /* Copy of gadget->ep0 */ struct usb_request *ep0req; /* Copy of cdev->req */ unsigned int ep0_req_tag; - const char *ep0req_name; struct fsg_buffhd *next_buffhd_to_fill; struct fsg_buffhd *next_buffhd_to_drain; @@ -369,8 +389,8 @@ struct fsg_common { struct completion thread_notifier; struct task_struct *thread_task; - /* Callback function to call when thread exits. */ - int (*thread_exits)(struct fsg_common *common); + /* Callback functions. */ + const struct fsg_operations *ops; /* Gadget's private data. */ void *private_data; @@ -394,12 +414,8 @@ struct fsg_config { const char *lun_name_format; const char *thread_name; - /* Callback function to call when thread exits. If no - * callback is set or it returns value lower then zero MSF - * will force eject all LUNs it operates on (including those - * marked as non-removable or with prevent_medium_removal flag - * set). */ - int (*thread_exits)(struct fsg_common *common); + /* Callback functions. */ + const struct fsg_operations *ops; /* Gadget's private data. */ void *private_data; @@ -435,6 +451,7 @@ static inline int __fsg_is_set(struct fsg_common *common, if (common->fsg) return 1; ERROR(common, "common->fsg is NULL in %s at %u\n", func, line); + WARN_ON(1); return 0; } @@ -623,8 +640,6 @@ static int fsg_setup(struct usb_function *f, /* Respond with data/status */ req->length = min((u16)1, w_length); - fsg->common->ep0req_name = - ctrl->bRequestType & USB_DIR_IN ? "ep0-in" : "ep0-out"; return ep0_queue(fsg->common); } @@ -1395,43 +1410,55 @@ static int do_start_stop(struct fsg_common *common) } else if (!curlun->removable) { curlun->sense_data = SS_INVALID_COMMAND; return -EINVAL; - } - - loej = common->cmnd[4] & 0x02; - start = common->cmnd[4] & 0x01; - - /* eject code from file_storage.c:do_start_stop() */ - - if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */ - (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */ + } else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */ + (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; return -EINVAL; } - if (!start) { - /* Are we allowed to unload the media? */ - if (curlun->prevent_medium_removal) { - LDBG(curlun, "unload attempt prevented\n"); - curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; - return -EINVAL; - } - if (loej) { /* Simulate an unload/eject */ - up_read(&common->filesem); - down_write(&common->filesem); - fsg_lun_close(curlun); - up_write(&common->filesem); - down_read(&common->filesem); - } - } else { + loej = common->cmnd[4] & 0x02; + start = common->cmnd[4] & 0x01; - /* Our emulation doesn't support mounting; the medium is - * available for use as soon as it is loaded. */ + /* Our emulation doesn't support mounting; the medium is + * available for use as soon as it is loaded. */ + if (start) { if (!fsg_lun_is_open(curlun)) { curlun->sense_data = SS_MEDIUM_NOT_PRESENT; return -EINVAL; } + return 0; } - return 0; + + /* Are we allowed to unload the media? */ + if (curlun->prevent_medium_removal) { + LDBG(curlun, "unload attempt prevented\n"); + curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; + return -EINVAL; + } + + if (!loej) + return 0; + + /* Simulate an unload/eject */ + if (common->ops && common->ops->pre_eject) { + int r = common->ops->pre_eject(common, curlun, + curlun - common->luns); + if (unlikely(r < 0)) + return r; + else if (r) + return 0; + } + + up_read(&common->filesem); + down_write(&common->filesem); + fsg_lun_close(curlun); + up_write(&common->filesem); + down_read(&common->filesem); + + return common->ops && common->ops->post_eject + ? min(0, common->ops->post_eject(common, curlun, + curlun - common->luns)) + : 0; } @@ -2610,7 +2637,8 @@ static int fsg_main_thread(void *common_) common->thread_task = NULL; spin_unlock_irq(&common->lock); - if (!common->thread_exits || common->thread_exits(common) < 0) { + if (!common->ops || !common->ops->thread_exits + || common->ops->thread_exits(common) < 0) { struct fsg_lun *curlun = common->luns; unsigned i = common->nluns; @@ -2686,6 +2714,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, common->free_storage_on_release = 0; } + common->ops = cfg->ops; common->private_data = cfg->private_data; common->gadget = gadget; @@ -2807,7 +2836,6 @@ buffhds_first_it: /* Tell the thread to start working */ - common->thread_exits = cfg->thread_exits; common->thread_task = kthread_create(fsg_main_thread, common, OR(cfg->thread_name, "file-storage")); @@ -2990,9 +3018,9 @@ static struct usb_gadget_strings *fsg_strings_array[] = { NULL, }; -static int fsg_add(struct usb_composite_dev *cdev, - struct usb_configuration *c, - struct fsg_common *common) +static int fsg_bind_config(struct usb_composite_dev *cdev, + struct usb_configuration *c, + struct fsg_common *common) { struct fsg_dev *fsg; int rc; @@ -3024,6 +3052,13 @@ static int fsg_add(struct usb_composite_dev *cdev, return rc; } +static inline int __deprecated __maybe_unused +fsg_add(struct usb_composite_dev *cdev, + struct usb_configuration *c, + struct fsg_common *common) +{ + return fsg_bind_config(cdev, c, common); +} /************************* Module parameters *************************/ @@ -3096,8 +3131,8 @@ fsg_config_from_params(struct fsg_config *cfg, cfg->product_name = 0; cfg->release = 0xffff; - cfg->thread_exits = 0; - cfg->private_data = 0; + cfg->ops = NULL; + cfg->private_data = NULL; /* Finalise */ cfg->can_stall = params->stall; diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index 6d3cc44..685d768 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -404,7 +404,7 @@ static void sourcesink_disable(struct usb_function *f) /*-------------------------------------------------------------------------*/ -static int __init sourcesink_bind_config(struct usb_configuration *c) +static int __ref sourcesink_bind_config(struct usb_configuration *c) { struct f_sourcesink *ss; int status; diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index b49d86e..a857b7a 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -56,7 +56,7 @@ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03), * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by * the optional "protocol" module parameter. In addition, the default - * Vendor ID, Product ID, and release number can be overridden. + * Vendor ID, Product ID, release number and serial number can be overridden. * * There is support for multiple logical units (LUNs), each of which has * its own backing file. The number of LUNs can be set using the optional @@ -93,6 +93,8 @@ * removable Default false, boolean for removable media * luns=N Default N = number of filenames, number of * LUNs to support + * nofua=b[,b...] Default false, booleans for ignore FUA flag + * in SCSI WRITE(10,12) commands * stall Default determined according to the type of * USB device controller (usually true), * boolean to permit the driver to halt @@ -106,17 +108,18 @@ * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID * release=0xRRRR Override the USB release number (bcdDevice) + * serial=HHHH... Override serial number (string of hex chars) * buflen=N Default N=16384, buffer size used (will be * rounded down to a multiple of * PAGE_CACHE_SIZE) * * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "ro", - * "removable", "luns", "stall", and "cdrom" options are available; default - * values are used for everything else. + * "removable", "luns", "nofua", "stall", and "cdrom" options are available; + * default values are used for everything else. * * The pathnames of the backing files and the ro settings are available in - * the attribute files "file" and "ro" in the lun<n> subdirectory of the - * gadget's sysfs directory. If the "removable" option is set, writing to + * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of + * the gadget's sysfs directory. If the "removable" option is set, writing to * these files will simulate ejecting/loading the medium (writing an empty * line means eject) and adjusting a write-enable tab. Changes to the ro * setting are not allowed when the medium is loaded or if CD-ROM emulation @@ -270,6 +273,8 @@ #define DRIVER_DESC "File-backed Storage Gadget" #define DRIVER_NAME "g_file_storage" +/* DRIVER_VERSION must be at least 6 characters long, as it is used + * to generate a fallback serial number. */ #define DRIVER_VERSION "20 November 2008" static char fsg_string_manufacturer[64]; @@ -301,8 +306,10 @@ MODULE_LICENSE("Dual BSD/GPL"); static struct { char *file[FSG_MAX_LUNS]; int ro[FSG_MAX_LUNS]; + int nofua[FSG_MAX_LUNS]; unsigned int num_filenames; unsigned int num_ros; + unsigned int num_nofuas; unsigned int nluns; int removable; @@ -314,6 +321,7 @@ static struct { unsigned short vendor; unsigned short product; unsigned short release; + char *serial; unsigned int buflen; int transport_type; @@ -341,6 +349,10 @@ MODULE_PARM_DESC(file, "names of backing files or devices"); module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO); MODULE_PARM_DESC(ro, "true to force read-only"); +module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas, + S_IRUGO); +MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit"); + module_param_named(luns, mod_data.nluns, uint, S_IRUGO); MODULE_PARM_DESC(luns, "number of LUNs"); @@ -353,6 +365,8 @@ MODULE_PARM_DESC(stall, "false to prevent bulk stalls"); module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO); MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk"); +module_param_named(serial, mod_data.serial, charp, S_IRUGO); +MODULE_PARM_DESC(serial, "USB serial number"); /* In the non-TEST version, only the module parameters listed above * are available. */ @@ -1272,7 +1286,8 @@ static int do_write(struct fsg_dev *fsg) curlun->sense_data = SS_INVALID_FIELD_IN_CDB; return -EINVAL; } - if (fsg->cmnd[1] & 0x08) { // FUA + /* FUA */ + if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) { spin_lock(&curlun->filp->f_lock); curlun->filp->f_flags |= O_DSYNC; spin_unlock(&curlun->filp->f_lock); @@ -3126,6 +3141,7 @@ static int fsg_main_thread(void *fsg_) /* The write permissions and store_xxx pointers are set in fsg_bind() */ static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); +static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL); static DEVICE_ATTR(file, 0444, fsg_show_file, NULL); @@ -3197,6 +3213,7 @@ static int __init check_parameters(struct fsg_dev *fsg) { int prot; int gcnum; + int i; /* Store the default values */ mod_data.transport_type = USB_PR_BULK; @@ -3272,13 +3289,65 @@ static int __init check_parameters(struct fsg_dev *fsg) ERROR(fsg, "invalid buflen\n"); return -ETOOSMALL; } + #endif /* CONFIG_USB_FILE_STORAGE_TEST */ + /* Serial string handling. + * On a real device, the serial string would be loaded + * from permanent storage. */ + if (mod_data.serial) { + const char *ch; + unsigned len = 0; + + /* Sanity check : + * The CB[I] specification limits the serial string to + * 12 uppercase hexadecimal characters. + * BBB need at least 12 uppercase hexadecimal characters, + * with a maximum of 126. */ + for (ch = mod_data.serial; *ch; ++ch) { + ++len; + if ((*ch < '0' || *ch > '9') && + (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */ + WARNING(fsg, + "Invalid serial string character: %c; " + "Failing back to default\n", + *ch); + goto fill_serial; + } + } + if (len > 126 || + (mod_data.transport_type == USB_PR_BULK && len < 12) || + (mod_data.transport_type != USB_PR_BULK && len > 12)) { + WARNING(fsg, + "Invalid serial string length; " + "Failing back to default\n"); + goto fill_serial; + } + fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial; + } else { + WARNING(fsg, + "Userspace failed to provide serial number; " + "Failing back to default\n"); +fill_serial: + /* Serial number not specified or invalid, make our own. + * We just encode it from the driver version string, + * 12 characters to comply with both CB[I] and BBB spec. + * Warning : Two devices running the same kernel will have + * the same fallback serial number. */ + for (i = 0; i < 12; i += 2) { + unsigned char c = DRIVER_VERSION[i / 2]; + + if (!c) + break; + sprintf(&fsg_string_serial[i], "%02X", c); + } + } + return 0; } -static int __init fsg_bind(struct usb_gadget *gadget) +static int __ref fsg_bind(struct usb_gadget *gadget) { struct fsg_dev *fsg = the_fsg; int rc; @@ -3305,6 +3374,10 @@ static int __init fsg_bind(struct usb_gadget *gadget) } } + /* Only for removable media? */ + dev_attr_nofua.attr.mode = 0644; + dev_attr_nofua.store = fsg_store_nofua; + /* Find out how many LUNs there should be */ i = mod_data.nluns; if (i == 0) @@ -3330,6 +3403,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) curlun->ro = mod_data.cdrom || mod_data.ro[i]; curlun->initially_ro = curlun->ro; curlun->removable = mod_data.removable; + curlun->nofua = mod_data.nofua[i]; curlun->dev.release = lun_release; curlun->dev.parent = &gadget->dev; curlun->dev.driver = &fsg_driver.driver; @@ -3344,6 +3418,8 @@ static int __init fsg_bind(struct usb_gadget *gadget) if ((rc = device_create_file(&curlun->dev, &dev_attr_ro)) != 0 || (rc = device_create_file(&curlun->dev, + &dev_attr_nofua)) != 0 || + (rc = device_create_file(&curlun->dev, &dev_attr_file)) != 0) { device_unregister(&curlun->dev); goto out; @@ -3447,16 +3523,6 @@ static int __init fsg_bind(struct usb_gadget *gadget) init_utsname()->sysname, init_utsname()->release, gadget->name); - /* On a real device, serial[] would be loaded from permanent - * storage. We just encode it from the driver version string. */ - for (i = 0; i < sizeof fsg_string_serial - 2; i += 2) { - unsigned char c = DRIVER_VERSION[i / 2]; - - if (!c) - break; - sprintf(&fsg_string_serial[i], "%02X", c); - } - fsg->thread_task = kthread_create(fsg_main_thread, fsg, "file-storage-gadget"); if (IS_ERR(fsg->thread_task)) { @@ -3478,8 +3544,8 @@ static int __init fsg_bind(struct usb_gadget *gadget) if (IS_ERR(p)) p = NULL; } - LINFO(curlun, "ro=%d, file: %s\n", - curlun->ro, (p ? p : "(error)")); + LINFO(curlun, "ro=%d, nofua=%d, file: %s\n", + curlun->ro, curlun->nofua, (p ? p : "(error)")); } } kfree(pathbuf); diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index d1af253..a9474f8 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -32,12 +32,13 @@ # include "u_ether.c" static u8 gfs_hostaddr[ETH_ALEN]; -#else -# if !defined CONFIG_USB_FUNCTIONFS_GENERIC -# define CONFIG_USB_FUNCTIONFS_GENERIC +# ifdef CONFIG_USB_FUNCTIONFS_ETH +static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); # endif +#else # define gether_cleanup() do { } while (0) # define gether_setup(gadget, hostaddr) ((int)0) +# define gfs_hostaddr NULL #endif #include "f_fs.c" @@ -107,15 +108,7 @@ static const struct usb_descriptor_header *gfs_otg_desc[] = { enum { GFS_STRING_MANUFACTURER_IDX, GFS_STRING_PRODUCT_IDX, -#ifdef CONFIG_USB_FUNCTIONFS_RNDIS - GFS_STRING_RNDIS_CONFIG_IDX, -#endif -#ifdef CONFIG_USB_FUNCTIONFS_ETH - GFS_STRING_ECM_CONFIG_IDX, -#endif -#ifdef CONFIG_USB_FUNCTIONFS_GENERIC - GFS_STRING_GENERIC_CONFIG_IDX, -#endif + GFS_STRING_FIRST_CONFIG_IDX, }; static char gfs_manufacturer[50]; @@ -126,13 +119,13 @@ static struct usb_string gfs_strings[] = { [GFS_STRING_MANUFACTURER_IDX].s = gfs_manufacturer, [GFS_STRING_PRODUCT_IDX].s = gfs_driver_desc, #ifdef CONFIG_USB_FUNCTIONFS_RNDIS - [GFS_STRING_RNDIS_CONFIG_IDX].s = "FunctionFS + RNDIS", + { .s = "FunctionFS + RNDIS" }, #endif #ifdef CONFIG_USB_FUNCTIONFS_ETH - [GFS_STRING_ECM_CONFIG_IDX].s = "FunctionFS + ECM", + { .s = "FunctionFS + ECM" }, #endif #ifdef CONFIG_USB_FUNCTIONFS_GENERIC - [GFS_STRING_GENERIC_CONFIG_IDX].s = "FunctionFS", + { .s = "FunctionFS" }, #endif { } /* end of list */ }; @@ -146,59 +139,33 @@ static struct usb_gadget_strings *gfs_dev_strings[] = { }; + +struct gfs_configuration { + struct usb_configuration c; + int (*eth)(struct usb_configuration *c, u8 *ethaddr); +} gfs_configurations[] = { #ifdef CONFIG_USB_FUNCTIONFS_RNDIS -static int gfs_do_rndis_config(struct usb_configuration *c); - -static struct usb_configuration gfs_rndis_config_driver = { - .label = "FunctionFS + RNDIS", - .bind = gfs_do_rndis_config, - .bConfigurationValue = 1, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, -}; -# define gfs_add_rndis_config(cdev) \ - usb_add_config(cdev, &gfs_rndis_config_driver) -#else -# define gfs_add_rndis_config(cdev) 0 + { + .eth = rndis_bind_config, + }, #endif - #ifdef CONFIG_USB_FUNCTIONFS_ETH -static int gfs_do_ecm_config(struct usb_configuration *c); - -static struct usb_configuration gfs_ecm_config_driver = { - .label = "FunctionFS + ECM", - .bind = gfs_do_ecm_config, - .bConfigurationValue = 1, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, -}; -# define gfs_add_ecm_config(cdev) \ - usb_add_config(cdev, &gfs_ecm_config_driver) -#else -# define gfs_add_ecm_config(cdev) 0 + { + .eth = eth_bind_config, + }, #endif - #ifdef CONFIG_USB_FUNCTIONFS_GENERIC -static int gfs_do_generic_config(struct usb_configuration *c); - -static struct usb_configuration gfs_generic_config_driver = { - .label = "FunctionFS", - .bind = gfs_do_generic_config, - .bConfigurationValue = 2, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, -}; -# define gfs_add_generic_config(cdev) \ - usb_add_config(cdev, &gfs_generic_config_driver) -#else -# define gfs_add_generic_config(cdev) 0 + { + }, #endif +}; static int gfs_bind(struct usb_composite_dev *cdev); static int gfs_unbind(struct usb_composite_dev *cdev); +static int gfs_do_config(struct usb_configuration *c); static struct usb_composite_driver gfs_driver = { .name = gfs_short_name, @@ -267,7 +234,7 @@ static int functionfs_check_dev_callback(const char *dev_name) static int gfs_bind(struct usb_composite_dev *cdev) { - int ret; + int ret, i; ENTER(); @@ -284,57 +251,32 @@ static int gfs_bind(struct usb_composite_dev *cdev) snprintf(gfs_manufacturer, sizeof gfs_manufacturer, "%s %s with %s", init_utsname()->sysname, init_utsname()->release, cdev->gadget->name); - ret = usb_string_id(cdev); - if (unlikely(ret < 0)) - goto error; - gfs_strings[GFS_STRING_MANUFACTURER_IDX].id = ret; - gfs_dev_desc.iManufacturer = ret; - - ret = usb_string_id(cdev); - if (unlikely(ret < 0)) - goto error; - gfs_strings[GFS_STRING_PRODUCT_IDX].id = ret; - gfs_dev_desc.iProduct = ret; - -#ifdef CONFIG_USB_FUNCTIONFS_RNDIS - ret = usb_string_id(cdev); - if (unlikely(ret < 0)) - goto error; - gfs_strings[GFS_STRING_RNDIS_CONFIG_IDX].id = ret; - gfs_rndis_config_driver.iConfiguration = ret; -#endif -#ifdef CONFIG_USB_FUNCTIONFS_ETH - ret = usb_string_id(cdev); + ret = usb_string_ids_tab(cdev, gfs_strings); if (unlikely(ret < 0)) goto error; - gfs_strings[GFS_STRING_ECM_CONFIG_IDX].id = ret; - gfs_ecm_config_driver.iConfiguration = ret; -#endif -#ifdef CONFIG_USB_FUNCTIONFS_GENERIC - ret = usb_string_id(cdev); - if (unlikely(ret < 0)) - goto error; - gfs_strings[GFS_STRING_GENERIC_CONFIG_IDX].id = ret; - gfs_generic_config_driver.iConfiguration = ret; -#endif + gfs_dev_desc.iManufacturer = gfs_strings[GFS_STRING_MANUFACTURER_IDX].id; + gfs_dev_desc.iProduct = gfs_strings[GFS_STRING_PRODUCT_IDX].id; ret = functionfs_bind(gfs_ffs_data, cdev); if (unlikely(ret < 0)) goto error; - ret = gfs_add_rndis_config(cdev); - if (unlikely(ret < 0)) - goto error_unbind; + for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) { + struct gfs_configuration *c = gfs_configurations + i; - ret = gfs_add_ecm_config(cdev); - if (unlikely(ret < 0)) - goto error_unbind; + ret = GFS_STRING_FIRST_CONFIG_IDX + i; + c->c.label = gfs_strings[ret].s; + c->c.iConfiguration = gfs_strings[ret].id; + c->c.bind = gfs_do_config; + c->c.bConfigurationValue = 1 + i; + c->c.bmAttributes = USB_CONFIG_ATT_SELFPOWER; - ret = gfs_add_generic_config(cdev); - if (unlikely(ret < 0)) - goto error_unbind; + ret = usb_add_config(cdev, &c->c); + if (unlikely(ret < 0)) + goto error_unbind; + } return 0; @@ -368,10 +310,10 @@ static int gfs_unbind(struct usb_composite_dev *cdev) } -static int __gfs_do_config(struct usb_configuration *c, - int (*eth)(struct usb_configuration *c, u8 *ethaddr), - u8 *ethaddr) +static int gfs_do_config(struct usb_configuration *c) { + struct gfs_configuration *gc = + container_of(c, struct gfs_configuration, c); int ret; if (WARN_ON(!gfs_ffs_data)) @@ -382,13 +324,13 @@ static int __gfs_do_config(struct usb_configuration *c, c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - if (eth) { - ret = eth(c, ethaddr); + if (gc->eth) { + ret = gc->eth(c, gfs_hostaddr); if (unlikely(ret < 0)) return ret; } - ret = functionfs_add(c->cdev, c, gfs_ffs_data); + ret = functionfs_bind_config(c->cdev, c, gfs_ffs_data); if (unlikely(ret < 0)) return ret; @@ -406,32 +348,12 @@ static int __gfs_do_config(struct usb_configuration *c, return 0; } -#ifdef CONFIG_USB_FUNCTIONFS_RNDIS -static int gfs_do_rndis_config(struct usb_configuration *c) -{ - ENTER(); - - return __gfs_do_config(c, rndis_bind_config, gfs_hostaddr); -} -#endif #ifdef CONFIG_USB_FUNCTIONFS_ETH -static int gfs_do_ecm_config(struct usb_configuration *c) -{ - ENTER(); - - return __gfs_do_config(c, - can_support_ecm(c->cdev->gadget) - ? ecm_bind_config : geth_bind_config, - gfs_hostaddr); -} -#endif - -#ifdef CONFIG_USB_FUNCTIONFS_GENERIC -static int gfs_do_generic_config(struct usb_configuration *c) +static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) { - ENTER(); - - return __gfs_do_config(c, NULL, NULL); + return can_support_ecm(c->cdev->gadget) + ? ecm_bind_config(c, ethaddr) + : geth_bind_config(c, ethaddr); } #endif diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index b7bf880..1b413a5c 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -1157,7 +1157,7 @@ fail: /* * Creates an output endpoint, and initializes output ports. */ -static int __init gmidi_bind(struct usb_gadget *gadget) +static int __ref gmidi_bind(struct usb_gadget *gadget) { struct gmidi_device *dev; struct usb_ep *in_ep, *out_ep; diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c index 7757226..735495b 100644 --- a/drivers/usb/gadget/hid.c +++ b/drivers/usb/gadget/hid.c @@ -127,7 +127,7 @@ static struct usb_gadget_strings *dev_strings[] = { /****************************** Configurations ******************************/ -static int __init do_config(struct usb_configuration *c) +static int __ref do_config(struct usb_configuration *c) { struct hidg_func_node *e; int func = 0, status = 0; @@ -156,7 +156,7 @@ static struct usb_configuration config_driver = { /****************************** Gadget Bind ******************************/ -static int __init hid_bind(struct usb_composite_dev *cdev) +static int __ref hid_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct list_head *tmp; diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index de8a838..fc35406 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1299,11 +1299,9 @@ static long dev_ioctl (struct file *fd, unsigned code, unsigned long value) struct usb_gadget *gadget = dev->gadget; long ret = -ENOTTY; - if (gadget->ops->ioctl) { - lock_kernel(); + if (gadget->ops->ioctl) ret = gadget->ops->ioctl (gadget, code, value); - unlock_kernel(); - } + return ret; } @@ -1867,13 +1865,9 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) buf += 4; length -= 4; - kbuf = kmalloc (length, GFP_KERNEL); - if (!kbuf) - return -ENOMEM; - if (copy_from_user (kbuf, buf, length)) { - kfree (kbuf); - return -EFAULT; - } + kbuf = memdup_user(buf, length); + if (IS_ERR(kbuf)) + return PTR_ERR(kbuf); spin_lock_irq (&dev->lock); value = -EINVAL; diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index a391351..c2d2a20 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -842,9 +842,9 @@ static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req, VDBG(dev, "req->mapped = 0\n"); } - DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08x\n", - _ep->name, - _req, _req->length, _req->buf, _req->dma); + DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08llx\n", + _ep->name, + _req, _req->length, _req->buf, (unsigned long long)_req->dma); _req->status = -EINPROGRESS; _req->actual = 0; diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c index 705cc1f..585f255 100644 --- a/drivers/usb/gadget/mass_storage.c +++ b/drivers/usb/gadget/mass_storage.c @@ -141,9 +141,14 @@ static int msg_thread_exits(struct fsg_common *common) return 0; } -static int __init msg_do_config(struct usb_configuration *c) +static int __ref msg_do_config(struct usb_configuration *c) { - struct fsg_common *common; + static const struct fsg_operations ops = { + .thread_exits = msg_thread_exits, + }; + static struct fsg_common common; + + struct fsg_common *retp; struct fsg_config config; int ret; @@ -153,13 +158,14 @@ static int __init msg_do_config(struct usb_configuration *c) } fsg_config_from_params(&config, &mod_data); - config.thread_exits = msg_thread_exits; - common = fsg_common_init(0, c->cdev, &config); - if (IS_ERR(common)) - return PTR_ERR(common); + config.ops = &ops; + + retp = fsg_common_init(&common, c->cdev, &config); + if (IS_ERR(retp)) + return PTR_ERR(retp); - ret = fsg_add(c->cdev, c, common); - fsg_common_put(common); + ret = fsg_bind_config(c->cdev, c, &common); + fsg_common_put(&common); return ret; } @@ -176,7 +182,7 @@ static struct usb_configuration msg_config_driver = { /****************************** Gadget Bind ******************************/ -static int __init msg_bind(struct usb_composite_dev *cdev) +static int __ref msg_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; int status; diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index a930d7f..795d762 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -24,6 +24,7 @@ #include <linux/kernel.h> #include <linux/utsname.h> +#include <linux/module.h> #if defined USB_ETH_RNDIS @@ -35,14 +36,13 @@ #define DRIVER_DESC "Multifunction Composite Gadget" -#define DRIVER_VERSION "2009/07/21" -/*-------------------------------------------------------------------------*/ +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Michal Nazarewicz"); +MODULE_LICENSE("GPL"); -#define MULTI_VENDOR_NUM 0x0525 /* XXX NetChip */ -#define MULTI_PRODUCT_NUM 0xa4ab /* XXX */ -/*-------------------------------------------------------------------------*/ +/***************************** All the files... *****************************/ /* * kbuild is not very cooperative with respect to linking separately @@ -57,6 +57,8 @@ #include "config.c" #include "epautoconf.c" +#include "f_mass_storage.c" + #include "u_serial.c" #include "f_acm.c" @@ -68,13 +70,24 @@ #endif #include "u_ether.c" -#undef DBG /* u_ether.c has broken idea about macros */ -#undef VDBG /* so clean up after it */ -#undef ERROR -#undef INFO -#include "f_mass_storage.c" -/*-------------------------------------------------------------------------*/ + +/***************************** Device Descriptor ****************************/ + +#define MULTI_VENDOR_NUM 0x0525 /* XXX NetChip */ +#define MULTI_PRODUCT_NUM 0xa4ab /* XXX */ + + +enum { + __MULTI_NO_CONFIG, +#ifdef CONFIG_USB_G_MULTI_RNDIS + MULTI_RNDIS_CONFIG_NUM, +#endif +#ifdef CONFIG_USB_G_MULTI_CDC + MULTI_CDC_CONFIG_NUM, +#endif +}; + static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, @@ -82,80 +95,82 @@ static struct usb_device_descriptor device_desc = { .bcdUSB = cpu_to_le16(0x0200), - /* .bDeviceClass = USB_CLASS_COMM, */ - /* .bDeviceSubClass = 0, */ - /* .bDeviceProtocol = 0, */ - .bDeviceClass = 0xEF, + .bDeviceClass = USB_CLASS_MISC /* 0xEF */, .bDeviceSubClass = 2, .bDeviceProtocol = 1, - /* .bMaxPacketSize0 = f(hardware) */ /* Vendor and product id can be overridden by module parameters. */ .idVendor = cpu_to_le16(MULTI_VENDOR_NUM), .idProduct = cpu_to_le16(MULTI_PRODUCT_NUM), - /* .bcdDevice = f(hardware) */ - /* .iManufacturer = DYNAMIC */ - /* .iProduct = DYNAMIC */ - /* NO SERIAL NUMBER */ - .bNumConfigurations = 1, }; -static struct usb_otg_descriptor otg_descriptor = { - .bLength = sizeof otg_descriptor, - .bDescriptorType = USB_DT_OTG, - - /* REVISIT SRP-only hardware is possible, although - * it would not be called "OTG" ... - */ - .bmAttributes = USB_OTG_SRP | USB_OTG_HNP, -}; static const struct usb_descriptor_header *otg_desc[] = { - (struct usb_descriptor_header *) &otg_descriptor, + (struct usb_descriptor_header *) &(struct usb_otg_descriptor){ + .bLength = sizeof(struct usb_otg_descriptor), + .bDescriptorType = USB_DT_OTG, + + /* + * REVISIT SRP-only hardware is possible, although + * it would not be called "OTG" ... + */ + .bmAttributes = USB_OTG_SRP | USB_OTG_HNP, + }, NULL, }; -/* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 +enum { + MULTI_STRING_MANUFACTURER_IDX, + MULTI_STRING_PRODUCT_IDX, +#ifdef CONFIG_USB_G_MULTI_RNDIS + MULTI_STRING_RNDIS_CONFIG_IDX, +#endif +#ifdef CONFIG_USB_G_MULTI_CDC + MULTI_STRING_CDC_CONFIG_IDX, +#endif +}; static char manufacturer[50]; static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [MULTI_STRING_MANUFACTURER_IDX].s = manufacturer, + [MULTI_STRING_PRODUCT_IDX].s = DRIVER_DESC, +#ifdef CONFIG_USB_G_MULTI_RNDIS + [MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS", +#endif +#ifdef CONFIG_USB_G_MULTI_CDC + [MULTI_STRING_CDC_CONFIG_IDX].s = "Multifunction with CDC ECM", +#endif { } /* end of list */ }; -static struct usb_gadget_strings stringtab_dev = { - .language = 0x0409, /* en-us */ - .strings = strings_dev, -}; - static struct usb_gadget_strings *dev_strings[] = { - &stringtab_dev, + &(struct usb_gadget_strings){ + .language = 0x0409, /* en-us */ + .strings = strings_dev, + }, NULL, }; -static u8 hostaddr[ETH_ALEN]; /****************************** Configurations ******************************/ -static struct fsg_module_parameters mod_data = { - .stall = 1 -}; -FSG_MODULE_PARAMETERS(/* no prefix */, mod_data); +static struct fsg_module_parameters fsg_mod_data = { .stall = 1 }; +FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data); + +static struct fsg_common fsg_common; + +static u8 hostaddr[ETH_ALEN]; -static struct fsg_common *fsg_common; +/********** RNDIS **********/ #ifdef USB_ETH_RNDIS -static int __init rndis_do_config(struct usb_configuration *c) +static __ref int rndis_do_config(struct usb_configuration *c) { int ret; @@ -172,26 +187,42 @@ static int __init rndis_do_config(struct usb_configuration *c) if (ret < 0) return ret; - ret = fsg_add(c->cdev, c, fsg_common); + ret = fsg_bind_config(c->cdev, c, &fsg_common); if (ret < 0) return ret; return 0; } -static struct usb_configuration rndis_config_driver = { - .label = "Multifunction Composite (RNDIS + MS + ACM)", - .bind = rndis_do_config, - .bConfigurationValue = 2, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, -}; +static int rndis_config_register(struct usb_composite_dev *cdev) +{ + static struct usb_configuration config = { + .bind = rndis_do_config, + .bConfigurationValue = MULTI_RNDIS_CONFIG_NUM, + .bmAttributes = USB_CONFIG_ATT_SELFPOWER, + }; + + config.label = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].s; + config.iConfiguration = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].id; + + return usb_add_config(cdev, &config); +} + +#else + +static int rndis_config_register(struct usb_composite_dev *cdev) +{ + return 0; +} #endif + +/********** CDC ECM **********/ + #ifdef CONFIG_USB_G_MULTI_CDC -static int __init cdc_do_config(struct usb_configuration *c) +static __ref int cdc_do_config(struct usb_configuration *c) { int ret; @@ -208,20 +239,33 @@ static int __init cdc_do_config(struct usb_configuration *c) if (ret < 0) return ret; - ret = fsg_add(c->cdev, c, fsg_common); + ret = fsg_bind_config(c->cdev, c, &fsg_common); if (ret < 0) return ret; return 0; } -static struct usb_configuration cdc_config_driver = { - .label = "Multifunction Composite (CDC + MS + ACM)", - .bind = cdc_do_config, - .bConfigurationValue = 1, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, -}; +static int cdc_config_register(struct usb_composite_dev *cdev) +{ + static struct usb_configuration config = { + .bind = cdc_do_config, + .bConfigurationValue = MULTI_CDC_CONFIG_NUM, + .bmAttributes = USB_CONFIG_ATT_SELFPOWER, + }; + + config.label = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].s; + config.iConfiguration = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].id; + + return usb_add_config(cdev, &config); +} + +#else + +static int cdc_config_register(struct usb_composite_dev *cdev) +{ + return 0; +} #endif @@ -230,7 +274,7 @@ static struct usb_configuration cdc_config_driver = { /****************************** Gadget Bind ******************************/ -static int __init multi_bind(struct usb_composite_dev *cdev) +static int __ref multi_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; int status, gcnum; @@ -252,67 +296,56 @@ static int __init multi_bind(struct usb_composite_dev *cdev) goto fail0; /* set up mass storage function */ - fsg_common = fsg_common_from_params(0, cdev, &mod_data); - if (IS_ERR(fsg_common)) { - status = PTR_ERR(fsg_common); - goto fail1; + { + void *retp; + retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data); + if (IS_ERR(retp)) { + status = PTR_ERR(retp); + goto fail1; + } } - + /* set bcdDevice */ gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) + if (gcnum >= 0) { device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else { - /* We assume that can_support_ecm() tells the truth; - * but if the controller isn't recognized at all then - * that assumption is a bit more likely to be wrong. - */ - WARNING(cdev, "controller '%s' not recognized\n", - gadget->name); + } else { + WARNING(cdev, "controller '%s' not recognized\n", gadget->name); device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099); } - - /* Allocate string descriptor numbers ... note that string - * contents can be overridden by the composite_dev glue. - */ - - /* device descriptor strings: manufacturer, product */ + /* allocate string descriptor numbers */ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", init_utsname()->sysname, init_utsname()->release, gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail2; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - status = usb_string_id(cdev); - if (status < 0) + status = usb_string_ids_tab(cdev, strings_dev); + if (unlikely(status < 0)) goto fail2; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; -#ifdef USB_ETH_RNDIS - /* register our first configuration */ - status = usb_add_config(cdev, &rndis_config_driver); - if (status < 0) + device_desc.iManufacturer = + strings_dev[MULTI_STRING_MANUFACTURER_IDX].id; + device_desc.iProduct = + strings_dev[MULTI_STRING_PRODUCT_IDX].id; + + /* register configurations */ + status = rndis_config_register(cdev); + if (unlikely(status < 0)) goto fail2; -#endif -#ifdef CONFIG_USB_G_MULTI_CDC - /* register our second configuration */ - status = usb_add_config(cdev, &cdc_config_driver); - if (status < 0) + status = cdc_config_register(cdev); + if (unlikely(status < 0)) goto fail2; -#endif - dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); - fsg_common_put(fsg_common); + /* we're done */ + dev_info(&gadget->dev, DRIVER_DESC "\n"); + fsg_common_put(&fsg_common); return 0; + + /* error recovery */ fail2: - fsg_common_put(fsg_common); + fsg_common_put(&fsg_common); fail1: gserial_cleanup(); fail0: @@ -339,18 +372,15 @@ static struct usb_composite_driver multi_driver = { .unbind = __exit_p(multi_unbind), }; -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Michal Nazarewicz"); -MODULE_LICENSE("GPL"); -static int __init g_multi_init(void) +static int __init multi_init(void) { return usb_composite_register(&multi_driver); } -module_init(g_multi_init); +module_init(multi_init); -static void __exit g_multi_cleanup(void) +static void __exit multi_exit(void) { usb_composite_unregister(&multi_driver); } -module_exit(g_multi_cleanup); +module_exit(multi_exit); diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 4c3ac5c..cf241c3 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -25,7 +25,7 @@ #include <linux/ioport.h> #include <linux/sched.h> #include <linux/slab.h> -#include <linux/smp_lock.h> +#include <linux/mutex.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> @@ -70,6 +70,7 @@ #define DRIVER_DESC "Printer Gadget" #define DRIVER_VERSION "2007 OCT 06" +static DEFINE_MUTEX(printer_mutex); static const char shortname [] = "printer"; static const char driver_desc [] = DRIVER_DESC; @@ -476,7 +477,7 @@ printer_open(struct inode *inode, struct file *fd) unsigned long flags; int ret = -EBUSY; - lock_kernel(); + mutex_lock(&printer_mutex); dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev); spin_lock_irqsave(&dev->lock, flags); @@ -492,7 +493,7 @@ printer_open(struct inode *inode, struct file *fd) spin_unlock_irqrestore(&dev->lock, flags); DBG(dev, "printer_open returned %x\n", ret); - unlock_kernel(); + mutex_unlock(&printer_mutex); return ret; } @@ -1346,7 +1347,7 @@ printer_unbind(struct usb_gadget *gadget) set_gadget_data(gadget, NULL); } -static int __init +static int __ref printer_bind(struct usb_gadget *gadget) { struct printer_dev *dev; diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 26193ec..521ebed 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -12,6 +12,8 @@ * published by the Free Software Foundation. */ +#define DEBUG + #include <linux/kernel.h> #include <linux/module.h> #include <linux/spinlock.h> @@ -23,6 +25,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -33,6 +36,7 @@ #include <plat/regs-usb-hsotg.h> #include <mach/regs-sys.h> #include <plat/udc-hs.h> +#include <plat/cpu.h> #define DMA_ADDR_INVALID (~((dma_addr_t)0)) @@ -91,7 +95,9 @@ struct s3c_hsotg_req; * For periodic IN endpoints, we have fifo_size and fifo_load to try * and keep track of the amount of data in the periodic FIFO for each * of these as we don't have a status register that tells us how much - * is in each of them. + * is in each of them. (note, this may actually be useless information + * as in shared-fifo mode periodic in acts like a single-frame packet + * buffer than a fifo) */ struct s3c_hsotg_ep { struct usb_ep ep; @@ -128,6 +134,7 @@ struct s3c_hsotg_ep { * @regs: The memory area mapped for accessing registers. * @regs_res: The resource that was allocated when claiming register space. * @irq: The IRQ number we are using + * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. * @debug_root: root directrory for debugfs. * @debug_file: main status file for debugfs. * @debug_fifo: FIFO status file for debugfs. @@ -145,6 +152,9 @@ struct s3c_hsotg { void __iomem *regs; struct resource *regs_res; int irq; + struct clk *clk; + + unsigned int dedicated_fifos:1; struct dentry *debug_root; struct dentry *debug_file; @@ -310,11 +320,11 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) hsotg->regs + S3C_GNPTXFSIZ); */ - /* set FIFO sizes to 2048/0x1C0 */ + /* set FIFO sizes to 2048/1024 */ writel(2048, hsotg->regs + S3C_GRXFSIZ); writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) | - S3C_GNPTXFSIZ_NPTxFDep(0x1C0), + S3C_GNPTXFSIZ_NPTxFDep(1024), hsotg->regs + S3C_GNPTXFSIZ); /* arange all the rest of the TX FIFOs, as some versions of this @@ -464,7 +474,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, if (to_write == 0) return 0; - if (periodic) { + if (periodic && !hsotg->dedicated_fifos) { u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index)); int size_left; int size_done; @@ -474,6 +484,14 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + /* if shared fifo, we cannot write anything until the + * previous data has been completely sent. + */ + if (hs_ep->fifo_load != 0) { + s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + return -ENOSPC; + } + dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n", __func__, size_left, hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size); @@ -494,6 +512,11 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); return -ENOSPC; } + } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { + can_write = readl(hsotg->regs + S3C_DTXFSTS(hs_ep->index)); + + can_write &= 0xffff; + can_write *= 4; } else { if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) { dev_dbg(hsotg->dev, @@ -505,6 +528,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, } can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts); + can_write *= 4; /* fifo size is in 32bit quantities. */ } dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n", @@ -517,6 +541,17 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, if (can_write > 512) can_write = 512; + /* limit the write to one max-packet size worth of data, but allow + * the transfer to return that it did not run out of fifo space + * doing it. */ + if (to_write > hs_ep->ep.maxpacket) { + to_write = hs_ep->ep.maxpacket; + + s3c_hsotg_en_gsint(hsotg, + periodic ? S3C_GINTSTS_PTxFEmp : + S3C_GINTSTS_NPTxFEmp); + } + /* see if we can write data */ if (to_write > can_write) { @@ -579,12 +614,10 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1; maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1; } else { + maxsize = 64+64; if (hs_ep->dir_in) { - /* maxsize = S3C_DIEPTSIZ0_XferSize_LIMIT + 1; */ - maxsize = 64+64+1; maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1; } else { - maxsize = 0x3f; maxpkt = 2; } } @@ -1353,6 +1386,9 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) read_ptr = hs_req->req.actual; max_req = hs_req->req.length - read_ptr; + dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n", + __func__, to_read, max_req, read_ptr, hs_req->req.length); + if (to_read > max_req) { /* more data appeared than we where willing * to deal with in this request. @@ -1362,9 +1398,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) WARN_ON_ONCE(1); } - dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n", - __func__, to_read, max_req, read_ptr, hs_req->req.length); - hs_ep->total_data += to_read; hs_req->req.actual += to_read; to_read = DIV_ROUND_UP(to_read, 4); @@ -1433,9 +1466,11 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, int epnum, bool was_setup) { + u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum)); struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum]; struct s3c_hsotg_req *hs_req = hs_ep->req; struct usb_request *req = &hs_req->req; + unsigned size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); int result = 0; if (!hs_req) { @@ -1444,9 +1479,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, } if (using_dma(hsotg)) { - u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum)); unsigned size_done; - unsigned size_left; /* Calculate the size of the transfer by checking how much * is left in the endpoint size register and then working it @@ -1456,14 +1489,18 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, * so may overshoot/undershoot the transfer. */ - size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); - size_done = hs_ep->size_loaded - size_left; size_done += hs_ep->last_load; req->actual = size_done; } + /* if there is more request to do, schedule new transfer */ + if (req->actual < req->length && size_left == 0) { + s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true); + return; + } + if (req->actual < req->length && req->short_not_ok) { dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n", __func__, req->actual, req->length); @@ -1758,7 +1795,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, if (dir_in) { s3c_hsotg_complete_in(hsotg, hs_ep); - if (idx == 0) + if (idx == 0 && !hs_ep->req) s3c_hsotg_enqueue_setup(hsotg); } else if (using_dma(hsotg)) { /* We're using DMA, we need to fire an OutDone here @@ -1818,6 +1855,15 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, __func__, idx); clear |= S3C_DIEPMSK_INTknEPMisMsk; } + + /* FIFO has space or is empty (see GAHBCFG) */ + if (hsotg->dedicated_fifos && + ints & S3C_DIEPMSK_TxFIFOEmpty) { + dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n", + __func__, idx); + s3c_hsotg_trytx(hsotg, hs_ep); + clear |= S3C_DIEPMSK_TxFIFOEmpty; + } } writel(clear, hsotg->regs + epint_reg); @@ -2071,17 +2117,12 @@ irq_retry: kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true); /* it seems after a reset we can end up with a situation - * where the TXFIFO still has data in it... try flushing - * it to remove anything that may still be in it. + * where the TXFIFO still has data in it... the docs + * suggest resetting all the fifos, so use the init_fifo + * code to relayout and flush the fifos. */ - if (1) { - writel(S3C_GRSTCTL_TxFNum(0) | S3C_GRSTCTL_TxFFlsh, - hsotg->regs + S3C_GRSTCTL); - - dev_info(hsotg->dev, "GNPTXSTS=%08x\n", - readl(hsotg->regs + S3C_GNPTXSTS)); - } + s3c_hsotg_init_fifo(hsotg); s3c_hsotg_enqueue_setup(hsotg); @@ -2274,6 +2315,12 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, break; } + /* if the hardware has dedicated fifos, we must give each IN EP + * a unique tx-fifo even if it is non-periodic. + */ + if (dir_in && hsotg->dedicated_fifos) + epctrl |= S3C_DxEPCTL_TxFNum(index); + /* for non control endpoints, set PID to D0 */ if (index) epctrl |= S3C_DxEPCTL_SetD0PID; @@ -2563,7 +2610,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | S3C_DIEPMSK_INTknEPMisMsk | - S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk, + S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk | + ((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0), hsotg->regs + S3C_DIEPMSK); /* don't need XferCompl, we get that from RXFIFO in slave mode. In @@ -2732,7 +2780,7 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, */ ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum)); - hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo); + hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; /* if we're using dma, we need to set the next-endpoint pointer * to be something valid. @@ -2753,13 +2801,33 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, */ static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg) { - u32 osc; + struct clk *xusbxti; + u32 pwr, osc; - writel(0, S3C_PHYPWR); + pwr = readl(S3C_PHYPWR); + pwr &= ~0x19; + writel(pwr, S3C_PHYPWR); mdelay(1); osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0; + xusbxti = clk_get(hsotg->dev, "xusbxti"); + if (xusbxti && !IS_ERR(xusbxti)) { + switch (clk_get_rate(xusbxti)) { + case 12*MHZ: + osc |= S3C_PHYCLK_CLKSEL_12M; + break; + case 24*MHZ: + osc |= S3C_PHYCLK_CLKSEL_24M; + break; + default: + case 48*MHZ: + /* default reference clock */ + break; + } + clk_put(xusbxti); + } + writel(osc | 0x10, S3C_PHYCLK); /* issue a full set of resets to the otg and core */ @@ -2772,6 +2840,8 @@ static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg) static void s3c_hsotg_init(struct s3c_hsotg *hsotg) { + u32 cfg4; + /* unmask subset of endpoint interrupts */ writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | @@ -2807,6 +2877,14 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0, hsotg->regs + S3C_GAHBCFG); + + /* check hardware configuration */ + + cfg4 = readl(hsotg->regs + 0x50); + hsotg->dedicated_fifos = (cfg4 >> 25) & 1; + + dev_info(hsotg->dev, "%s fifos\n", + hsotg->dedicated_fifos ? "dedicated" : "shared"); } static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) @@ -3181,13 +3259,20 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->dev = dev; hsotg->plat = plat; + hsotg->clk = clk_get(&pdev->dev, "otg"); + if (IS_ERR(hsotg->clk)) { + dev_err(dev, "cannot get otg clock\n"); + ret = -EINVAL; + goto err_mem; + } + platform_set_drvdata(pdev, hsotg); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "cannot find register resource 0\n"); ret = -EINVAL; - goto err_mem; + goto err_clk; } hsotg->regs_res = request_mem_region(res->start, resource_size(res), @@ -3195,7 +3280,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) if (!hsotg->regs_res) { dev_err(dev, "cannot reserve registers\n"); ret = -ENOENT; - goto err_mem; + goto err_clk; } hsotg->regs = ioremap(res->start, resource_size(res)); @@ -3248,6 +3333,8 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) /* reset the system */ + clk_enable(hsotg->clk); + s3c_hsotg_gate(pdev, true); s3c_hsotg_otgreset(hsotg); @@ -3271,7 +3358,8 @@ err_regs: err_regs_res: release_resource(hsotg->regs_res); kfree(hsotg->regs_res); - +err_clk: + clk_put(hsotg->clk); err_mem: kfree(hsotg); return ret; @@ -3293,6 +3381,9 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) s3c_hsotg_gate(pdev, false); + clk_disable(hsotg->clk); + clk_put(hsotg->clk); + kfree(hsotg); return 0; } diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index f46a609..b22eedb 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -137,7 +137,7 @@ MODULE_PARM_DESC(n_ports, "number of ports to create, default=1"); /*-------------------------------------------------------------------------*/ -static int __init serial_bind_config(struct usb_configuration *c) +static int __ref serial_bind_config(struct usb_configuration *c) { unsigned i; int status = 0; @@ -161,7 +161,7 @@ static struct usb_configuration serial_config_driver = { .bmAttributes = USB_CONFIG_ATT_SELFPOWER, }; -static int __init gs_bind(struct usb_composite_dev *cdev) +static int __ref gs_bind(struct usb_composite_dev *cdev) { int gcnum; struct usb_gadget *gadget = cdev->gadget; diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index 04c462f..484acfb 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -57,10 +57,12 @@ #include <asm/unaligned.h> -/* Thanks to NetChip Technologies for donating this product ID. +/* + * Thanks to NetChip Technologies for donating this product ID. * * DO NOT REUSE THESE IDs with any other driver!! Ever!! - * Instead: allocate your own, using normal USB-IF procedures. */ + * Instead: allocate your own, using normal USB-IF procedures. + */ #define FSG_VENDOR_ID 0x0525 /* NetChip */ #define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */ @@ -84,14 +86,27 @@ #define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args) #define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args) -/* Keep those macros in sync with thos in - * include/linux/ubs/composite.h or else GCC will complain. If they +/* + * Keep those macros in sync with those in + * include/linux/usb/composite.h or else GCC will complain. If they * are identical (the same names of arguments, white spaces in the * same places) GCC will allow redefinition otherwise (even if some - * white space is removed or added) warning will be issued. No - * checking if those symbols is defined is performed because warning - * is desired when those macros were defined by someone else to mean - * something else. */ + * white space is removed or added) warning will be issued. + * + * Those macros are needed here because File Storage Gadget does not + * include the composite.h header. For composite gadgets those macros + * are redundant since composite.h is included any way. + * + * One could check whether those macros are already defined (which + * would indicate composite.h had been included) or not (which would + * indicate we were in FSG) but this is not done because a warning is + * desired if definitions here differ from the ones in composite.h. + * + * We want the definitions to match and be the same in File Storage + * Gadget as well as Mass Storage Function (and so composite gadgets + * using MSF). If someone changes them in composite.h it will produce + * a warning in this file when building MSF. + */ #define DBG(d, fmt, args...) dev_dbg(&(d)->gadget->dev , fmt , ## args) #define VDBG(d, fmt, args...) dev_vdbg(&(d)->gadget->dev , fmt , ## args) #define ERROR(d, fmt, args...) dev_err(&(d)->gadget->dev , fmt , ## args) @@ -269,6 +284,7 @@ struct fsg_lun { unsigned int prevent_medium_removal:1; unsigned int registered:1; unsigned int info_valid:1; + unsigned int nofua:1; u32 sense_data; u32 sense_data_info; @@ -313,9 +329,11 @@ struct fsg_buffhd { enum fsg_buffer_state state; struct fsg_buffhd *next; - /* The NetChip 2280 is faster, and handles some protocol faults + /* + * The NetChip 2280 is faster, and handles some protocol faults * better, if we don't submit any short bulk-out read requests. - * So we will record the intended request length here. */ + * So we will record the intended request length here. + */ unsigned int bulk_out_intended_length; struct usb_request *inreq; @@ -395,8 +413,10 @@ fsg_intf_desc = { .iInterface = FSG_STRING_INTERFACE, }; -/* Three full-speed endpoint descriptors: bulk-in, bulk-out, - * and interrupt-in. */ +/* + * Three full-speed endpoint descriptors: bulk-in, bulk-out, and + * interrupt-in. + */ static struct usb_endpoint_descriptor fsg_fs_bulk_in_desc = { @@ -459,7 +479,7 @@ static struct usb_descriptor_header *fsg_fs_function[] = { * * That means alternate endpoint descriptors (bigger packets) * and a "device qualifier" ... plus more construction options - * for the config descriptor. + * for the configuration descriptor. */ static struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = { @@ -547,8 +567,10 @@ static struct usb_gadget_strings fsg_stringtab = { /*-------------------------------------------------------------------------*/ -/* If the next two routines are called while the gadget is registered, - * the caller must own fsg->filesem for writing. */ +/* + * If the next two routines are called while the gadget is registered, + * the caller must own fsg->filesem for writing. + */ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) { @@ -587,8 +609,10 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) goto out; } - /* If we can't read the file, it's no good. - * If we can't write the file, use it read-only. */ + /* + * If we can't read the file, it's no good. + * If we can't write the file, use it read-only. + */ if (!filp->f_op || !(filp->f_op->read || filp->f_op->aio_read)) { LINFO(curlun, "file not readable: %s\n", filename); goto out; @@ -646,8 +670,10 @@ static void fsg_lun_close(struct fsg_lun *curlun) /*-------------------------------------------------------------------------*/ -/* Sync the file data, don't bother with the metadata. - * This code was copied from fs/buffer.c:sys_fdatasync(). */ +/* + * Sync the file data, don't bother with the metadata. + * This code was copied from fs/buffer.c:sys_fdatasync(). + */ static int fsg_lun_fsync_sub(struct fsg_lun *curlun) { struct file *filp = curlun->filp; @@ -689,6 +715,14 @@ static ssize_t fsg_show_ro(struct device *dev, struct device_attribute *attr, : curlun->initially_ro); } +static ssize_t fsg_show_nofua(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + + return sprintf(buf, "%u\n", curlun->nofua); +} + static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr, char *buf) { @@ -723,26 +757,47 @@ static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr, ssize_t rc = count; struct fsg_lun *curlun = fsg_lun_from_dev(dev); struct rw_semaphore *filesem = dev_get_drvdata(dev); - int i; + unsigned long ro; - if (sscanf(buf, "%d", &i) != 1) + if (strict_strtoul(buf, 2, &ro)) return -EINVAL; - /* Allow the write-enable status to change only while the backing file - * is closed. */ + /* + * Allow the write-enable status to change only while the + * backing file is closed. + */ down_read(filesem); if (fsg_lun_is_open(curlun)) { LDBG(curlun, "read-only status change prevented\n"); rc = -EBUSY; } else { - curlun->ro = !!i; - curlun->initially_ro = !!i; + curlun->ro = ro; + curlun->initially_ro = ro; LDBG(curlun, "read-only status set to %d\n", curlun->ro); } up_read(filesem); return rc; } +static ssize_t fsg_store_nofua(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + unsigned long nofua; + + if (strict_strtoul(buf, 2, &nofua)) + return -EINVAL; + + /* Sync data when switching from async mode to sync */ + if (!nofua && curlun->nofua) + fsg_lun_fsync_sub(curlun); + + curlun->nofua = nofua; + + return count; +} + static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 1da755a..6bb876d 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -704,17 +704,6 @@ static char *host_addr; module_param(host_addr, charp, S_IRUGO); MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); - -static u8 __init nibble(unsigned char c) -{ - if (isdigit(c)) - return c - '0'; - c = toupper(c); - if (isxdigit(c)) - return 10 + c - 'A'; - return 0; -} - static int get_ether_addr(const char *str, u8 *dev_addr) { if (str) { @@ -725,8 +714,8 @@ static int get_ether_addr(const char *str, u8 *dev_addr) if ((*str == '.') || (*str == ':')) str++; - num = nibble(*str++) << 4; - num |= (nibble(*str++)); + num = hex_to_bin(*str++) << 4; + num |= hex_to_bin(*str++); dev_addr [i] = num; } if (is_valid_ether_addr(dev_addr)) diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 3e8dcb5..01e5354 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -18,6 +18,7 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/interrupt.h> #include <linux/device.h> #include <linux/delay.h> diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c index 288d211..de1deb7 100644 --- a/drivers/usb/gadget/webcam.c +++ b/drivers/usb/gadget/webcam.c @@ -308,7 +308,7 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = { * USB configuration */ -static int __init +static int __ref webcam_config_bind(struct usb_configuration *c) { return uvc_bind_config(c, uvc_control_cls, uvc_fs_streaming_cls, @@ -330,7 +330,7 @@ webcam_unbind(struct usb_composite_dev *cdev) return 0; } -static int __init +static int __ref webcam_bind(struct usb_composite_dev *cdev) { int ret; diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 807280d..cf353920 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -264,7 +264,7 @@ static void zero_resume(struct usb_composite_dev *cdev) /*-------------------------------------------------------------------------*/ -static int __init zero_bind(struct usb_composite_dev *cdev) +static int __ref zero_bind(struct usb_composite_dev *cdev) { int gcnum; struct usb_gadget *gadget = cdev->gadget; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index f865be2..2d926ce 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -72,8 +72,9 @@ config USB_EHCI_ROOT_HUB_TT from ARC, and has since changed hands a few times. config USB_EHCI_TT_NEWSCHED - bool "Improved Transaction Translator scheduling (EXPERIMENTAL)" - depends on USB_EHCI_HCD && EXPERIMENTAL + bool "Improved Transaction Translator scheduling" + depends on USB_EHCI_HCD + default y ---help--- This changes the periodic scheduling code to fill more of the low and full speed bandwidth available from the Transaction Translator @@ -84,9 +85,11 @@ config USB_EHCI_TT_NEWSCHED If you have multiple periodic low/fullspeed devices connected to a highspeed USB hub which is connected to a highspeed USB Host Controller, and some of those devices will not work correctly - (possibly due to "ENOSPC" or "-28" errors), say Y. + (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if + you have only one such device and it doesn't work, you could try + saying N. - If unsure, say N. + If unsure, say Y. config USB_EHCI_BIG_ENDIAN_MMIO bool diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index faa6174..2baf8a8 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -228,7 +228,7 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev) * the root hub is either suspended or stopped. */ spin_lock_irqsave(&ehci->lock, flags); - ehci_prepare_ports_for_controller_suspend(ehci); + ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); ehci_writel(ehci, 0, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable); diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 874d200..76b7fd2 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -98,13 +98,18 @@ static void dbg_hcc_params (struct ehci_hcd *ehci, char *label) HCC_64BIT_ADDR(params) ? " 64 bit addr" : ""); } else { ehci_dbg (ehci, - "%s hcc_params %04x thresh %d uframes %s%s%s\n", + "%s hcc_params %04x thresh %d uframes %s%s%s%s%s%s%s\n", label, params, HCC_ISOC_THRES(params), HCC_PGM_FRAMELISTLEN(params) ? "256/512/1024" : "1024", HCC_CANPARK(params) ? " park" : "", - HCC_64BIT_ADDR(params) ? " 64 bit addr" : ""); + HCC_64BIT_ADDR(params) ? " 64 bit addr" : "", + HCC_LPM(params) ? " LPM" : "", + HCC_PER_PORT_CHANGE_EVENT(params) ? " ppce" : "", + HCC_HW_PREFETCH(params) ? " hw prefetch" : "", + HCC_32FRAME_PERIODIC_LIST(params) ? + " 32 peridic list" : ""); } } #else @@ -191,8 +196,9 @@ static int __maybe_unused dbg_status_buf (char *buf, unsigned len, const char *label, u32 status) { return scnprintf (buf, len, - "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s", + "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s%s", label, label [0] ? " " : "", status, + (status & STS_PPCE_MASK) ? " PPCE" : "", (status & STS_ASS) ? " Async" : "", (status & STS_PSS) ? " Periodic" : "", (status & STS_RECL) ? " Recl" : "", @@ -210,8 +216,9 @@ static int __maybe_unused dbg_intr_buf (char *buf, unsigned len, const char *label, u32 enable) { return scnprintf (buf, len, - "%s%sintrenable %02x%s%s%s%s%s%s", + "%s%sintrenable %02x%s%s%s%s%s%s%s", label, label [0] ? " " : "", enable, + (enable & STS_PPCE_MASK) ? " PPCE" : "", (enable & STS_IAA) ? " IAA" : "", (enable & STS_FATAL) ? " FATAL" : "", (enable & STS_FLR) ? " FLR" : "", @@ -228,9 +235,15 @@ static int dbg_command_buf (char *buf, unsigned len, const char *label, u32 command) { return scnprintf (buf, len, - "%s%scommand %06x %s=%d ithresh=%d%s%s%s%s period=%s%s %s", + "%s%scommand %07x %s%s%s%s%s%s=%d ithresh=%d%s%s%s%s " + "period=%s%s %s", label, label [0] ? " " : "", command, - (command & CMD_PARK) ? "park" : "(park)", + (command & CMD_HIRD) ? " HIRD" : "", + (command & CMD_PPCEE) ? " PPCEE" : "", + (command & CMD_FSP) ? " FSP" : "", + (command & CMD_ASPE) ? " ASPE" : "", + (command & CMD_PSPE) ? " PSPE" : "", + (command & CMD_PARK) ? " park" : "(park)", CMD_PARK_CNT (command), (command >> 16) & 0x3f, (command & CMD_LRESET) ? " LReset" : "", @@ -257,11 +270,22 @@ dbg_port_buf (char *buf, unsigned len, const char *label, int port, u32 status) } return scnprintf (buf, len, - "%s%sport %d status %06x%s%s sig=%s%s%s%s%s%s%s%s%s%s", + "%s%sport:%d status %06x %d %s%s%s%s%s%s " + "sig=%s%s%s%s%s%s%s%s%s%s%s", label, label [0] ? " " : "", port, status, + status>>25,/*device address */ + (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ACK ? + " ACK" : "", + (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_NYET ? + " NYET" : "", + (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_STALL ? + " STALL" : "", + (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ERR ? + " ERR" : "", (status & PORT_POWER) ? " POWER" : "", (status & PORT_OWNER) ? " OWNER" : "", sig, + (status & PORT_LPM) ? " LPM" : "", (status & PORT_RESET) ? " RESET" : "", (status & PORT_SUSPEND) ? " SUSPEND" : "", (status & PORT_RESUME) ? " RESUME" : "", @@ -330,6 +354,13 @@ static int debug_async_open(struct inode *, struct file *); static int debug_periodic_open(struct inode *, struct file *); static int debug_registers_open(struct inode *, struct file *); static int debug_async_open(struct inode *, struct file *); +static int debug_lpm_open(struct inode *, struct file *); +static ssize_t debug_lpm_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos); +static ssize_t debug_lpm_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos); +static int debug_lpm_close(struct inode *inode, struct file *file); + static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*); static int debug_close(struct inode *, struct file *); @@ -351,6 +382,13 @@ static const struct file_operations debug_registers_fops = { .read = debug_output, .release = debug_close, }; +static const struct file_operations debug_lpm_fops = { + .owner = THIS_MODULE, + .open = debug_lpm_open, + .read = debug_lpm_read, + .write = debug_lpm_write, + .release = debug_lpm_close, +}; static struct dentry *ehci_debug_root; @@ -674,7 +712,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) spin_lock_irqsave (&ehci->lock, flags); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { size = scnprintf (next, size, "bus %s, device %s\n" "%s\n" @@ -917,51 +955,127 @@ static int debug_registers_open(struct inode *inode, struct file *file) return file->private_data ? 0 : -ENOMEM; } +static int debug_lpm_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static int debug_lpm_close(struct inode *inode, struct file *file) +{ + return 0; +} + +static ssize_t debug_lpm_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + /* TODO: show lpm stats */ + return 0; +} + +static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + char buf[50]; + size_t len; + u32 temp; + unsigned long port; + u32 __iomem *portsc ; + u32 params; + + hcd = bus_to_hcd(file->private_data); + ehci = hcd_to_ehci(hcd); + + len = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, len)) + return -EFAULT; + buf[len] = '\0'; + if (len > 0 && buf[len - 1] == '\n') + buf[len - 1] = '\0'; + + if (strncmp(buf, "enable", 5) == 0) { + if (strict_strtoul(buf + 7, 10, &port)) + return -EINVAL; + params = ehci_readl(ehci, &ehci->caps->hcs_params); + if (port > HCS_N_PORTS(params)) { + ehci_dbg(ehci, "ERR: LPM on bad port %lu\n", port); + return -ENODEV; + } + portsc = &ehci->regs->port_status[port-1]; + temp = ehci_readl(ehci, portsc); + if (!(temp & PORT_DEV_ADDR)) { + ehci_dbg(ehci, "LPM: no device attached\n"); + return -ENODEV; + } + temp |= PORT_LPM; + ehci_writel(ehci, temp, portsc); + printk(KERN_INFO "force enable LPM for port %lu\n", port); + } else if (strncmp(buf, "hird=", 5) == 0) { + unsigned long hird; + if (strict_strtoul(buf + 5, 16, &hird)) + return -EINVAL; + printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird); + temp = ehci_readl(ehci, &ehci->regs->command); + temp &= ~CMD_HIRD; + temp |= hird << 24; + ehci_writel(ehci, temp, &ehci->regs->command); + } else if (strncmp(buf, "disable", 7) == 0) { + if (strict_strtoul(buf + 8, 10, &port)) + return -EINVAL; + params = ehci_readl(ehci, &ehci->caps->hcs_params); + if (port > HCS_N_PORTS(params)) { + ehci_dbg(ehci, "ERR: LPM off bad port %lu\n", port); + return -ENODEV; + } + portsc = &ehci->regs->port_status[port-1]; + temp = ehci_readl(ehci, portsc); + if (!(temp & PORT_DEV_ADDR)) { + ehci_dbg(ehci, "ERR: no device attached\n"); + return -ENODEV; + } + temp &= ~PORT_LPM; + ehci_writel(ehci, temp, portsc); + printk(KERN_INFO "disabled LPM for port %lu\n", port); + } else + return -EOPNOTSUPP; + return count; +} + static inline void create_debug_files (struct ehci_hcd *ehci) { struct usb_bus *bus = &ehci_to_hcd(ehci)->self; ehci->debug_dir = debugfs_create_dir(bus->bus_name, ehci_debug_root); if (!ehci->debug_dir) - goto dir_error; - - ehci->debug_async = debugfs_create_file("async", S_IRUGO, - ehci->debug_dir, bus, - &debug_async_fops); - if (!ehci->debug_async) - goto async_error; - - ehci->debug_periodic = debugfs_create_file("periodic", S_IRUGO, - ehci->debug_dir, bus, - &debug_periodic_fops); - if (!ehci->debug_periodic) - goto periodic_error; - - ehci->debug_registers = debugfs_create_file("registers", S_IRUGO, - ehci->debug_dir, bus, - &debug_registers_fops); - if (!ehci->debug_registers) - goto registers_error; + return; + + if (!debugfs_create_file("async", S_IRUGO, ehci->debug_dir, bus, + &debug_async_fops)) + goto file_error; + + if (!debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus, + &debug_periodic_fops)) + goto file_error; + + if (!debugfs_create_file("registers", S_IRUGO, ehci->debug_dir, bus, + &debug_registers_fops)) + goto file_error; + + if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus, + &debug_lpm_fops)) + goto file_error; + return; -registers_error: - debugfs_remove(ehci->debug_periodic); -periodic_error: - debugfs_remove(ehci->debug_async); -async_error: - debugfs_remove(ehci->debug_dir); -dir_error: - ehci->debug_periodic = NULL; - ehci->debug_async = NULL; - ehci->debug_dir = NULL; +file_error: + debugfs_remove_recursive(ehci->debug_dir); } static inline void remove_debug_files (struct ehci_hcd *ehci) { - debugfs_remove(ehci->debug_registers); - debugfs_remove(ehci->debug_periodic); - debugfs_remove(ehci->debug_async); - debugfs_remove(ehci->debug_dir); + debugfs_remove_recursive(ehci->debug_dir); } #endif /* STUB_DEBUG_FILES */ diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 5cd967d..a416421 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -313,7 +313,8 @@ static int ehci_fsl_drv_suspend(struct device *dev) struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); void __iomem *non_ehci = hcd->regs; - ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd)); + ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), + device_may_wakeup(dev)); if (!fsl_deep_sleep()) return 0; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index a3ef2a9..34a928d 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -36,6 +36,7 @@ #include <linux/dma-mapping.h> #include <linux/debugfs.h> #include <linux/slab.h> +#include <linux/uaccess.h> #include <asm/byteorder.h> #include <asm/io.h> @@ -78,7 +79,13 @@ static const char hcd_name [] = "ehci_hcd"; #define EHCI_TUNE_RL_TT 0 #define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ #define EHCI_TUNE_MULT_TT 1 -#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ +/* + * Some drivers think it's safe to schedule isochronous transfers more than + * 256 ms into the future (partly as a result of an old bug in the scheduling + * code). In an attempt to avoid trouble, we will use a minimum scheduling + * length of 512 frames instead of 256. + */ +#define EHCI_TUNE_FLS 1 /* (medium) 512-frame schedule */ #define EHCI_IAA_MSECS 10 /* arbitrary */ #define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ @@ -100,6 +107,11 @@ static int ignore_oc = 0; module_param (ignore_oc, bool, S_IRUGO); MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); +/* for link power management(LPM) feature */ +static unsigned int hird; +module_param(hird, int, S_IRUGO); +MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n"); + #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) /*-------------------------------------------------------------------------*/ @@ -304,6 +316,7 @@ static void end_unlink_async(struct ehci_hcd *ehci); static void ehci_work(struct ehci_hcd *ehci); #include "ehci-hub.c" +#include "ehci-lpm.c" #include "ehci-mem.c" #include "ehci-q.c" #include "ehci-sched.c" @@ -577,6 +590,11 @@ static int ehci_init(struct usb_hcd *hcd) if (log2_irq_thresh < 0 || log2_irq_thresh > 6) log2_irq_thresh = 0; temp = 1 << (16 + log2_irq_thresh); + if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) { + ehci->has_ppcd = 1; + ehci_dbg(ehci, "enable per-port change event\n"); + temp |= CMD_PPCEE; + } if (HCC_CANPARK(hcc_params)) { /* HW default park == 3, on hardware that supports it (like * NVidia and ALI silicon), maximizes throughput on the async @@ -603,10 +621,22 @@ static int ehci_init(struct usb_hcd *hcd) default: BUG(); } } + if (HCC_LPM(hcc_params)) { + /* support link power management EHCI 1.1 addendum */ + ehci_dbg(ehci, "support lpm\n"); + ehci->has_lpm = 1; + if (hird > 0xf) { + ehci_dbg(ehci, "hird %d invalid, use default 0", + hird); + hird = 0; + } + temp |= hird << 24; + } ehci->command = temp; /* Accept arbitrarily long scatter-gather lists */ - hcd->self.sg_tablesize = ~0; + if (!(hcd->driver->flags & HCD_LOCAL_MEM)) + hcd->self.sg_tablesize = ~0; return 0; } @@ -619,7 +649,6 @@ static int ehci_run (struct usb_hcd *hcd) u32 hcc_params; hcd->uses_new_polling = 1; - hcd->poll_rh = 0; /* EHCI spec section 4.1 */ if ((retval = ehci_reset(ehci)) != 0) { @@ -764,6 +793,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* remote wakeup [4.3.1] */ if (status & STS_PCD) { unsigned i = HCS_N_PORTS (ehci->hcs_params); + u32 ppcd = 0; /* kick root hub later */ pcd_status = status; @@ -772,9 +802,18 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) if (!(cmd & CMD_RUN)) usb_hcd_resume_root_hub(hcd); + /* get per-port change detect bits */ + if (ehci->has_ppcd) + ppcd = status >> 16; + while (i--) { - int pstatus = ehci_readl(ehci, - &ehci->regs->port_status [i]); + int pstatus; + + /* leverage per-port change bits feature */ + if (ehci->has_ppcd && !(ppcd & (1 << i))) + continue; + pstatus = ehci_readl(ehci, + &ehci->regs->port_status[i]); if (pstatus & PORT_OWNER) continue; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index e7d3d8d..796ea0c 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci) } static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, - bool suspending) + bool suspending, bool do_wakeup) { int port; u32 temp; @@ -117,8 +117,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, * when the controller is suspended or resumed. In all other * cases they don't need to be changed. */ - if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || - device_may_wakeup(ehci_to_hcd(ehci)->self.controller)) + if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup) return; /* clear phy low-power mode before changing wakeup flags */ @@ -167,6 +166,10 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg); } } + + /* Does the root hub have a port wakeup pending? */ + if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)) + usb_hcd_resume_root_hub(ehci_to_hcd(ehci)); } static int ehci_bus_suspend (struct usb_hcd *hcd) @@ -316,7 +319,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) if (time_before (jiffies, ehci->next_statechange)) msleep(5); spin_lock_irq (&ehci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { spin_unlock_irq(&ehci->lock); return -ESHUTDOWN; } @@ -603,6 +606,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) u32 mask; int ports, i, retval = 1; unsigned long flags; + u32 ppcd = 0; /* if !USB_SUSPEND, root hub timers won't get shut down ... */ if (!HC_IS_RUNNING(hcd->state)) @@ -632,7 +636,15 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) /* port N changes (bit N)? */ spin_lock_irqsave (&ehci->lock, flags); + + /* get per-port change detect bits */ + if (ehci->has_ppcd) + ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16; + for (i = 0; i < ports; i++) { + /* leverage per-port change bits feature */ + if (ehci->has_ppcd && !(ppcd & (1 << i))) + continue; temp = ehci_readl(ehci, &ehci->regs->port_status [i]); /* @@ -790,6 +802,11 @@ static int ehci_hub_control ( status_reg); break; case USB_PORT_FEAT_C_CONNECTION: + if (ehci->has_lpm) { + /* clear PORTSC bits on disconnect */ + temp &= ~PORT_LPM; + temp &= ~PORT_DEV_ADDR; + } ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC, status_reg); break; diff --git a/drivers/usb/host/ehci-lpm.c b/drivers/usb/host/ehci-lpm.c new file mode 100644 index 0000000..b4d4d63 --- /dev/null +++ b/drivers/usb/host/ehci-lpm.c @@ -0,0 +1,83 @@ +/* ehci-lpm.c EHCI HCD LPM support code + * Copyright (c) 2008 - 2010, Intel Corporation. + * Author: Jacob Pan <jacob.jun.pan@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* this file is part of ehci-hcd.c */ +static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num) +{ + u32 __iomem portsc; + + ehci_dbg(ehci, "set dev address %d for port %d\n", dev_addr, port_num); + if (port_num > HCS_N_PORTS(ehci->hcs_params)) { + ehci_dbg(ehci, "invalid port number %d\n", port_num); + return -ENODEV; + } + portsc = ehci_readl(ehci, &ehci->regs->port_status[port_num-1]); + portsc &= ~PORT_DEV_ADDR; + portsc |= dev_addr<<25; + ehci_writel(ehci, portsc, &ehci->regs->port_status[port_num-1]); + return 0; +} + +/* + * this function is used to check if the device support LPM + * if yes, mark the PORTSC register with PORT_LPM bit + */ +static int ehci_lpm_check(struct ehci_hcd *ehci, int port) +{ + u32 __iomem *portsc ; + u32 val32; + int retval; + + portsc = &ehci->regs->port_status[port-1]; + val32 = ehci_readl(ehci, portsc); + if (!(val32 & PORT_DEV_ADDR)) { + ehci_dbg(ehci, "LPM: no device attached\n"); + return -ENODEV; + } + val32 |= PORT_LPM; + ehci_writel(ehci, val32, portsc); + msleep(5); + val32 |= PORT_SUSPEND; + ehci_dbg(ehci, "Sending LPM 0x%08x to port %d\n", val32, port); + ehci_writel(ehci, val32, portsc); + /* wait for ACK */ + msleep(10); + retval = handshake(ehci, &ehci->regs->port_status[port-1], PORT_SSTS, + PORTSC_SUSPEND_STS_ACK, 125); + dbg_port(ehci, "LPM", port, val32); + if (retval != -ETIMEDOUT) { + ehci_dbg(ehci, "LPM: device ACK for LPM\n"); + val32 |= PORT_LPM; + /* + * now device should be in L1 sleep, let's wake up the device + * so that we can complete enumeration. + */ + ehci_writel(ehci, val32, portsc); + msleep(10); + val32 |= PORT_RESUME; + ehci_writel(ehci, val32, portsc); + } else { + ehci_dbg(ehci, "LPM: device does not ACK, disable LPM %d\n", + retval); + val32 &= ~PORT_LPM; + retval = -ETIMEDOUT; + ehci_writel(ehci, val32, portsc); + } + + return retval; +} diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 5450e62..116ae28 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -38,6 +38,7 @@ #include <linux/gpio.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> +#include <linux/usb/ulpi.h> #include <plat/usb.h> /* @@ -236,6 +237,35 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask) /*-------------------------------------------------------------------------*/ +static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + unsigned reg = 0; + + reg = ULPI_FUNC_CTRL_RESET + /* FUNCTION_CTRL_SET register */ + | (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT) + /* Write */ + | (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) + /* PORTn */ + | ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) + /* start ULPI access*/ + | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT); + + ehci_omap_writel(omap->ehci_base, EHCI_INSNREG05_ULPI, reg); + + /* Wait for ULPI access completion */ + while ((ehci_omap_readl(omap->ehci_base, EHCI_INSNREG05_ULPI) + & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) { + cpu_relax(); + + if (time_after(jiffies, timeout)) { + dev_dbg(omap->dev, "phy reset operation timed out\n"); + break; + } + } +} + /* omap_start_ehc * - Start the TI USBHOST controller */ @@ -425,6 +455,12 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) gpio_set_value(omap->reset_gpio_port[1], 1); } + /* Soft reset the PHY using PHY reset command over ULPI */ + if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) + omap_ehci_soft_phy_reset(omap, 0); + if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) + omap_ehci_soft_phy_reset(omap, 1); + return 0; err_sys_status: diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index d43d176..58b72d7 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -114,6 +114,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) break; case PCI_VENDOR_ID_INTEL: ehci->need_io_watchdog = 0; + ehci->fs_i_thresh = 1; if (pdev->device == 0x27cc) { ehci->broken_periodic = 1; ehci_info(ehci, "using broken periodic workaround\n"); @@ -277,7 +278,7 @@ done: * Also they depend on separate root hub suspend/resume. */ -static int ehci_pci_suspend(struct usb_hcd *hcd) +static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); unsigned long flags; @@ -291,7 +292,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd) * the root hub is either suspended or stopped. */ spin_lock_irqsave (&ehci->lock, flags); - ehci_prepare_ports_for_controller_suspend(ehci); + ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup); ehci_writel(ehci, 0, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable); @@ -361,6 +362,22 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) } #endif +static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int rc = 0; + + if (!udev->parent) /* udev is root hub itself, impossible */ + rc = -1; + /* we only support lpm device connected to root hub yet */ + if (ehci->has_lpm && !udev->parent->parent) { + rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum); + if (!rc) + rc = ehci_lpm_check(ehci, udev->portnum); + } + return rc; +} + static const struct hc_driver ehci_pci_hc_driver = { .description = hcd_name, .product_desc = "EHCI Host Controller", @@ -407,6 +424,11 @@ static const struct hc_driver ehci_pci_hc_driver = { .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, + /* + * call back when device connected and addressed + */ + .update_device = ehci_update_device, + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 11a79c4..233c288 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1126,8 +1126,7 @@ submit_async ( #endif spin_lock_irqsave (&ehci->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &ehci_to_hcd(ehci)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) { rc = -ESHUTDOWN; goto done; } diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 805ec63..a92526d 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -880,8 +880,7 @@ static int intr_submit ( spin_lock_irqsave (&ehci->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &ehci_to_hcd(ehci)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) { status = -ESHUTDOWN; goto done_not_linked; } @@ -1075,15 +1074,6 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream) if (stream->ep) stream->ep->hcpriv = NULL; - if (stream->rescheduled) { - ehci_info (ehci, "ep%d%s-iso rescheduled " - "%lu times in %lu seconds\n", - stream->bEndpointAddress, is_in ? "in" : "out", - stream->rescheduled, - ((jiffies - stream->start)/HZ) - ); - } - kfree(stream); } } @@ -1396,30 +1386,25 @@ iso_stream_schedule ( struct ehci_iso_stream *stream ) { - u32 now, next, start, period; + u32 now, next, start, period, span; int status; unsigned mod = ehci->periodic_size << 3; struct ehci_iso_sched *sched = urb->hcpriv; - struct pci_dev *pdev; - if (sched->span > (mod - SCHEDULE_SLOP)) { - ehci_dbg (ehci, "iso request %p too long\n", urb); - status = -EFBIG; - goto fail; + period = urb->interval; + span = sched->span; + if (!stream->highspeed) { + period <<= 3; + span <<= 3; } - if ((stream->depth + sched->span) > mod) { - ehci_dbg (ehci, "request %p would overflow (%d+%d>%d)\n", - urb, stream->depth, sched->span, mod); + if (span > mod - SCHEDULE_SLOP) { + ehci_dbg (ehci, "iso request %p too long\n", urb); status = -EFBIG; goto fail; } - period = urb->interval; - if (!stream->highspeed) - period <<= 3; - - now = ehci_readl(ehci, &ehci->regs->frame_index) % mod; + now = ehci_readl(ehci, &ehci->regs->frame_index) & (mod - 1); /* Typical case: reuse current schedule, stream is still active. * Hopefully there are no gaps from the host falling behind @@ -1427,34 +1412,35 @@ iso_stream_schedule ( * slot in the schedule, implicitly assuming URB_ISO_ASAP. */ if (likely (!list_empty (&stream->td_list))) { - pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller); - start = stream->next_uframe; + u32 excess; /* For high speed devices, allow scheduling within the - * isochronous scheduling threshold. For full speed devices, - * don't. (Work around for Intel ICH9 bug.) + * isochronous scheduling threshold. For full speed devices + * and Intel PCI-based controllers, don't (work around for + * Intel ICH9 bug). */ - if (!stream->highspeed && - pdev->vendor == PCI_VENDOR_ID_INTEL) + if (!stream->highspeed && ehci->fs_i_thresh) next = now + ehci->i_thresh; else next = now; - /* Fell behind (by up to twice the slop amount)? */ - if (((start - next) & (mod - 1)) >= - mod - 2 * SCHEDULE_SLOP) - start += period * DIV_ROUND_UP( - (next - start) & (mod - 1), - period); - - /* Tried to schedule too far into the future? */ - if (unlikely(((start - now) & (mod - 1)) + sched->span - >= mod - 2 * SCHEDULE_SLOP)) { + /* Fell behind (by up to twice the slop amount)? + * We decide based on the time of the last currently-scheduled + * slot, not the time of the next available slot. + */ + excess = (stream->next_uframe - period - next) & (mod - 1); + if (excess >= mod - 2 * SCHEDULE_SLOP) + start = next + excess - mod + period * + DIV_ROUND_UP(mod - excess, period); + else + start = next + excess + period; + if (start - now >= mod) { + ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n", + urb, start - now - period, period, + mod); status = -EFBIG; goto fail; } - stream->next_uframe = start; - goto ready; } /* need to schedule; when's the next (u)frame we could start? @@ -1463,51 +1449,60 @@ iso_stream_schedule ( * can also help high bandwidth if the dma and irq loads don't * jump until after the queue is primed. */ - start = SCHEDULE_SLOP + (now & ~0x07); - start %= mod; - stream->next_uframe = start; - - /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ - - /* find a uframe slot with enough bandwidth */ - for (; start < (stream->next_uframe + period); start++) { - int enough_space; - - /* check schedule: enough space? */ - if (stream->highspeed) - enough_space = itd_slot_ok (ehci, mod, start, - stream->usecs, period); - else { - if ((start % 8) >= 6) - continue; - enough_space = sitd_slot_ok (ehci, mod, stream, - start, sched, period); + else { + start = SCHEDULE_SLOP + (now & ~0x07); + + /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ + + /* find a uframe slot with enough bandwidth */ + next = start + period; + for (; start < next; start++) { + + /* check schedule: enough space? */ + if (stream->highspeed) { + if (itd_slot_ok(ehci, mod, start, + stream->usecs, period)) + break; + } else { + if ((start % 8) >= 6) + continue; + if (sitd_slot_ok(ehci, mod, stream, + start, sched, period)) + break; + } } - /* schedule it here if there's enough bandwidth */ - if (enough_space) { - stream->next_uframe = start % mod; - goto ready; + /* no room in the schedule */ + if (start == next) { + ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n", + urb, now, now + mod); + status = -ENOSPC; + goto fail; } } - /* no room in the schedule */ - ehci_dbg (ehci, "iso %ssched full %p (now %d max %d)\n", - list_empty (&stream->td_list) ? "" : "re", - urb, now, now + mod); - status = -ENOSPC; + /* Tried to schedule too far into the future? */ + if (unlikely(start - now + span - period + >= mod - 2 * SCHEDULE_SLOP)) { + ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n", + urb, start - now, span - period, + mod - 2 * SCHEDULE_SLOP); + status = -EFBIG; + goto fail; + } -fail: - iso_sched_free (stream, sched); - urb->hcpriv = NULL; - return status; + stream->next_uframe = start & (mod - 1); -ready: /* report high speed start in uframes; full speed, in frames */ urb->start_frame = stream->next_uframe; if (!stream->highspeed) urb->start_frame >>= 3; return 0; + + fail: + iso_sched_free(stream, sched); + urb->hcpriv = NULL; + return status; } /*-------------------------------------------------------------------------*/ @@ -1602,7 +1597,7 @@ itd_link_urb ( struct ehci_iso_sched *iso_sched = urb->hcpriv; struct ehci_itd *itd; - next_uframe = stream->next_uframe % mod; + next_uframe = stream->next_uframe & (mod - 1); if (unlikely (list_empty(&stream->td_list))) { ehci_to_hcd(ehci)->self.bandwidth_allocated @@ -1613,7 +1608,6 @@ itd_link_urb ( (stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out", urb->interval, next_uframe >> 3, next_uframe & 0x7); - stream->start = jiffies; } ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++; @@ -1639,14 +1633,13 @@ itd_link_urb ( itd_patch(ehci, itd, iso_sched, packet, uframe); next_uframe += stream->interval; - stream->depth += stream->interval; - next_uframe %= mod; + next_uframe &= mod - 1; packet++; /* link completed itds into the schedule */ if (((next_uframe >> 3) != frame) || packet == urb->number_of_packets) { - itd_link (ehci, frame % ehci->periodic_size, itd); + itd_link(ehci, frame & (ehci->periodic_size - 1), itd); itd = NULL; } } @@ -1695,7 +1688,6 @@ itd_complete ( t = hc32_to_cpup(ehci, &itd->hw_transaction [uframe]); itd->hw_transaction [uframe] = 0; - stream->depth -= stream->interval; /* report transfer status */ if (unlikely (t & ISO_ERRS)) { @@ -1815,8 +1807,7 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, /* schedule ... need to lock */ spin_lock_irqsave (&ehci->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &ehci_to_hcd(ehci)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) { status = -ESHUTDOWN; goto done_not_linked; } @@ -2024,9 +2015,8 @@ sitd_link_urb ( "sched devp %s ep%d%s-iso [%d] %dms/%04x\n", urb->dev->devpath, stream->bEndpointAddress & 0x0f, (stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out", - (next_uframe >> 3) % ehci->periodic_size, + (next_uframe >> 3) & (ehci->periodic_size - 1), stream->interval, hc32_to_cpu(ehci, stream->splits)); - stream->start = jiffies; } ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++; @@ -2047,13 +2037,12 @@ sitd_link_urb ( sitd->urb = urb; sitd_patch(ehci, stream, sitd, sched, packet); - sitd_link (ehci, (next_uframe >> 3) % ehci->periodic_size, + sitd_link(ehci, (next_uframe >> 3) & (ehci->periodic_size - 1), sitd); next_uframe += stream->interval << 3; - stream->depth += stream->interval << 3; } - stream->next_uframe = next_uframe % mod; + stream->next_uframe = next_uframe & (mod - 1); /* don't need that schedule data any more */ iso_sched_free (stream, sched); @@ -2111,7 +2100,6 @@ sitd_complete ( desc->actual_length = desc->length - SITD_LENGTH(t); urb->actual_length += desc->actual_length; } - stream->depth -= stream->interval << 3; /* handle completion now? */ if ((urb_index + 1) != urb->number_of_packets) @@ -2201,8 +2189,7 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb, /* schedule ... need to lock */ spin_lock_irqsave (&ehci->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &ehci_to_hcd(ehci)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) { status = -ESHUTDOWN; goto done_not_linked; } @@ -2263,7 +2250,7 @@ scan_periodic (struct ehci_hcd *ehci) now_uframe = ehci->next_uframe; if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { clock = ehci_readl(ehci, &ehci->regs->frame_index); - clock_frame = (clock >> 3) % ehci->periodic_size; + clock_frame = (clock >> 3) & (ehci->periodic_size - 1); } else { clock = now_uframe + mod - 1; clock_frame = -1; @@ -2272,7 +2259,7 @@ scan_periodic (struct ehci_hcd *ehci) free_cached_lists(ehci); ehci->clock_frame = clock_frame; } - clock %= mod; + clock &= mod - 1; clock_frame = clock >> 3; for (;;) { @@ -2361,7 +2348,7 @@ restart: * frame is current. */ if (((frame == clock_frame) || - (((frame + 1) % ehci->periodic_size) + (((frame + 1) & (ehci->periodic_size - 1)) == clock_frame)) && live && (q.sitd->hw_results & @@ -2428,7 +2415,8 @@ restart: || ehci->periodic_sched == 0) break; ehci->next_uframe = now_uframe; - now = ehci_readl(ehci, &ehci->regs->frame_index) % mod; + now = ehci_readl(ehci, &ehci->regs->frame_index) & + (mod - 1); if (now_uframe == now) break; @@ -2441,7 +2429,7 @@ restart: } } else { now_uframe++; - now_uframe %= mod; + now_uframe &= mod - 1; } } } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 650a687..bde823f 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -130,6 +130,7 @@ struct ehci_hcd { /* one per controller */ unsigned has_amcc_usb23:1; unsigned need_io_watchdog:1; unsigned broken_periodic:1; + unsigned fs_i_thresh:1; /* Intel iso scheduling */ /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) @@ -140,7 +141,8 @@ struct ehci_hcd { /* one per controller */ #define OHCI_HCCTRL_LEN 0x4 __hc32 *ohci_hcctrl_reg; unsigned has_hostpc:1; - + unsigned has_lpm:1; /* support link power management */ + unsigned has_ppcd:1; /* support per-port change bits */ u8 sbrn; /* packed release number */ /* irq statistics */ @@ -154,9 +156,6 @@ struct ehci_hcd { /* one per controller */ /* debug files */ #ifdef DEBUG struct dentry *debug_dir; - struct dentry *debug_async; - struct dentry *debug_periodic; - struct dentry *debug_registers; #endif }; @@ -401,15 +400,12 @@ struct ehci_iso_stream { u32 refcount; u8 bEndpointAddress; u8 highspeed; - u16 depth; /* depth in uframes */ struct list_head td_list; /* queued itds/sitds */ struct list_head free_list; /* list of unused itds/sitds */ struct usb_device *udev; struct usb_host_endpoint *ep; /* output of (re)scheduling */ - unsigned long start; /* jiffies */ - unsigned long rescheduled; int next_uframe; __hc32 splits; @@ -538,11 +534,11 @@ struct ehci_fstn { /* Prepare the PORTSC wakeup flags during controller suspend/resume */ -#define ehci_prepare_ports_for_controller_suspend(ehci) \ - ehci_adjust_port_wakeup_flags(ehci, true); +#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup) \ + ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup); -#define ehci_prepare_ports_for_controller_resume(ehci) \ - ehci_adjust_port_wakeup_flags(ehci, false); +#define ehci_prepare_ports_for_controller_resume(ehci) \ + ehci_adjust_port_wakeup_flags(ehci, false, false); /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index 35742f8..9bfac65 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -159,7 +159,7 @@ static int hwahc_op_start(struct usb_hcd *usb_hcd) goto error_set_cluster_id; usb_hcd->uses_new_polling = 1; - usb_hcd->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); usb_hcd->state = HC_STATE_RUNNING; result = 0; out: @@ -776,7 +776,7 @@ static int hwahc_probe(struct usb_interface *usb_iface, goto error_alloc; } usb_hcd->wireless = 1; - usb_hcd->flags |= HCD_FLAG_SAW_IRQ; + set_bit(HCD_FLAG_SAW_IRQ, &usb_hcd->flags); wusbhc = usb_hcd_to_wusbhc(usb_hcd); hwahc = container_of(wusbhc, struct hwahc, wusbhc); hwahc_init(hwahc); diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index ca0e98d..3e56303 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1521,7 +1521,7 @@ static int imx21_hc_reset(struct usb_hcd *hcd) return -ETIMEDOUT; } spin_unlock_irq(&imx21->lock); - schedule_timeout(1); + schedule_timeout_uninterruptible(1); spin_lock_irq(&imx21->lock); } spin_unlock_irqrestore(&imx21->lock, flags); diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h index d995351..0f97820 100644 --- a/drivers/usb/host/isp1362.h +++ b/drivers/usb/host/isp1362.h @@ -8,29 +8,7 @@ /* * Platform specific compile time options */ -#if defined(CONFIG_ARCH_KARO) -#include <asm/arch/hardware.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/karo.h> - -#define USE_32BIT 1 - - -/* These options are mutually eclusive */ -#define USE_PLATFORM_DELAY 1 -#define USE_NDELAY 0 -/* - * MAX_ROOT_PORTS: Number of downstream ports - * - * The chip has two USB ports, one of which can be configured as - * an USB device port, so the value of this constant is implementation - * specific. - */ -#define MAX_ROOT_PORTS 2 -#define DUMMY_DELAY_ACCESS do {} while (0) - -/* insert platform specific definitions for other machines here */ -#elif defined(CONFIG_BLACKFIN) +#if defined(CONFIG_BLACKFIN) #include <linux/io.h> #define USE_32BIT 0 diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index dbcafa2..d1a3dfc 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -482,7 +482,6 @@ static int isp1760_run(struct usb_hcd *hcd) u32 chipid; hcd->uses_new_polling = 1; - hcd->poll_rh = 0; hcd->state = HC_STATE_RUNNING; isp1760_enable_interrupts(hcd); @@ -1450,7 +1449,7 @@ static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb, epnum = urb->ep->desc.bEndpointAddress; spin_lock_irqsave(&priv->lock, flags); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &priv_to_hcd(priv)->flags)) { + if (!HCD_HW_ACCESSIBLE(priv_to_hcd(priv))) { rc = -ESHUTDOWN; goto done; } diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 8ad2441..36abd2b 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -645,7 +645,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) hcd->product_desc, hcd_name); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { size -= scnprintf (next, size, "SUSPENDED (no register access)\n"); goto done; @@ -687,7 +687,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) next += temp; temp = scnprintf (next, size, "hub poll timer %s\n", - ohci_to_hcd(ohci)->poll_rh ? "ON" : "off"); + HCD_POLL_RH(ohci_to_hcd(ohci)) ? "ON" : "off"); size -= temp; next += temp; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 02864a2..c3b4ccc 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -212,7 +212,7 @@ static int ohci_urb_enqueue ( spin_lock_irqsave (&ohci->lock, flags); /* don't submit to a dead HC */ - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { retval = -ENODEV; goto fail; } @@ -685,7 +685,7 @@ retry: } /* use rhsc irqs after khubd is fully initialized */ - hcd->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); hcd->uses_new_polling = 1; /* start controller operations */ @@ -822,7 +822,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) else if (ints & OHCI_INTR_RD) { ohci_vdbg(ohci, "resume detect\n"); ohci_writel(ohci, OHCI_INTR_RD, ®s->intrstatus); - hcd->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); if (ohci->autostop) { spin_lock (&ohci->lock); ohci_rh_resume (ohci); diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 65cac8c..cddcda9 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -284,7 +284,7 @@ static int ohci_bus_suspend (struct usb_hcd *hcd) spin_lock_irq (&ohci->lock); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) rc = -ESHUTDOWN; else rc = ohci_rh_suspend (ohci, 0); @@ -302,7 +302,7 @@ static int ohci_bus_resume (struct usb_hcd *hcd) spin_lock_irq (&ohci->lock); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) rc = -ESHUTDOWN; else rc = ohci_rh_resume (ohci); @@ -355,6 +355,11 @@ static void ohci_finish_controller_resume(struct usb_hcd *hcd) ohci_readl(ohci, &ohci->regs->intrenable); msleep(20); } + + /* Does the root hub have a port wakeup pending? */ + if (ohci_readl(ohci, &ohci->regs->intrstatus) & + (OHCI_INTR_RD | OHCI_INTR_RHSC)) + usb_hcd_resume_root_hub(hcd); } /* Carry out polling-, autostop-, and autoresume-related state changes */ @@ -364,7 +369,7 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, int poll_rh = 1; int rhsc_enable; - /* Some broken controllers never turn off RHCS in the interrupt + /* Some broken controllers never turn off RHSC in the interrupt * status register. For their sake we won't re-enable RHSC * interrupts if the interrupt bit is already active. */ @@ -489,7 +494,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) unsigned long flags; spin_lock_irqsave (&ohci->lock, flags); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) goto done; /* undocumented erratum seen on at least rev D */ @@ -533,8 +538,12 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) } } - hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed, - any_connected, rhsc_status); + if (ohci_root_hub_state_changes(ohci, changed, + any_connected, rhsc_status)) + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + else + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + done: spin_unlock_irqrestore (&ohci->lock, flags); @@ -701,7 +710,7 @@ static int ohci_hub_control ( u32 temp; int retval = 0; - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) return -ESHUTDOWN; switch (typeReq) { diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index b8a1148..6bdc8b2 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -392,7 +392,7 @@ static int __devinit ohci_pci_start (struct usb_hcd *hcd) #ifdef CONFIG_PM -static int ohci_pci_suspend(struct usb_hcd *hcd) +static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); unsigned long flags; diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c index 23fd6a8..48ee694 100644 --- a/drivers/usb/host/ohci-ssb.c +++ b/drivers/usb/host/ohci-ssb.c @@ -93,8 +93,11 @@ static void ssb_ohci_detach(struct ssb_device *dev) { struct usb_hcd *hcd = ssb_get_drvdata(dev); + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); usb_remove_hcd(hcd); iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); ssb_device_disable(dev, 0); } @@ -106,10 +109,52 @@ static int ssb_ohci_attach(struct ssb_device *dev) int err = -ENOMEM; u32 tmp, flags = 0; - if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) - flags |= SSB_OHCI_TMSLOW_HOSTMODE; + if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || + dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) + return -EOPNOTSUPP; - ssb_device_enable(dev, flags); + if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) { + /* Put the device into host-mode. */ + flags |= SSB_OHCI_TMSLOW_HOSTMODE; + ssb_device_enable(dev, flags); + } else if (dev->id.coreid == SSB_DEV_USB20_HOST) { + /* + * USB 2.0 special considerations: + * + * In addition to the standard SSB reset sequence, the Host + * Control Register must be programmed to bring the USB core + * and various phy components out of reset. + */ + ssb_device_enable(dev, 0); + ssb_write32(dev, 0x200, 0x7ff); + + /* Change Flush control reg */ + tmp = ssb_read32(dev, 0x400); + tmp &= ~8; + ssb_write32(dev, 0x400, tmp); + tmp = ssb_read32(dev, 0x400); + + /* Change Shim control reg */ + tmp = ssb_read32(dev, 0x304); + tmp &= ~0x100; + ssb_write32(dev, 0x304, tmp); + tmp = ssb_read32(dev, 0x304); + + udelay(1); + + /* Work around for 5354 failures */ + if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) { + /* Change syn01 reg */ + tmp = 0x00fe00fe; + ssb_write32(dev, 0x894, tmp); + + /* Change syn03 reg */ + tmp = ssb_read32(dev, 0x89c); + tmp |= 0x1; + ssb_write32(dev, 0x89c, tmp); + } + } else + ssb_device_enable(dev, 0); hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, dev_name(dev->dev)); @@ -200,6 +245,7 @@ static int ssb_ohci_resume(struct ssb_device *dev) static const struct ssb_device_id ssb_ohci_table[] = { SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), SSB_DEVTABLE_END }; MODULE_DEVICE_TABLE(ssb, ssb_ohci_table); diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index f608dfd..d9c85a2 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -1641,8 +1641,7 @@ static int submit_async(struct oxu_hcd *oxu, struct urb *urb, #endif spin_lock_irqsave(&oxu->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &oxu_to_hcd(oxu)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) { rc = -ESHUTDOWN; goto done; } @@ -2209,8 +2208,7 @@ static int intr_submit(struct oxu_hcd *oxu, struct urb *urb, spin_lock_irqsave(&oxu->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &oxu_to_hcd(oxu)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) { status = -ESHUTDOWN; goto done; } @@ -2715,7 +2713,6 @@ static int oxu_run(struct usb_hcd *hcd) u32 temp, hcc_params; hcd->uses_new_polling = 1; - hcd->poll_rh = 0; /* EHCI spec section 4.1 */ retval = ehci_reset(oxu); diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index bcf9f0e..990f06b 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -813,8 +813,11 @@ static int sl811h_urb_enqueue( #endif /* avoid all allocations within spinlocks */ - if (!hep->hcpriv) + if (!hep->hcpriv) { ep = kzalloc(sizeof *ep, mem_flags); + if (ep == NULL) + return -ENOMEM; + } spin_lock_irqsave(&sl811->lock, flags); diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 98cf0b2..6e7fb5f 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -17,7 +17,6 @@ #include "uhci-hcd.h" -#define uhci_debug_operations (* (const struct file_operations *) NULL) static struct dentry *uhci_debugfs_root; #ifdef DEBUG @@ -495,18 +494,16 @@ static int uhci_debug_open(struct inode *inode, struct file *file) { struct uhci_hcd *uhci = inode->i_private; struct uhci_debug *up; - int ret = -ENOMEM; unsigned long flags; - lock_kernel(); up = kmalloc(sizeof(*up), GFP_KERNEL); if (!up) - goto out; + return -ENOMEM; up->data = kmalloc(MAX_OUTPUT, GFP_KERNEL); if (!up->data) { kfree(up); - goto out; + return -ENOMEM; } up->size = 0; @@ -517,10 +514,7 @@ static int uhci_debug_open(struct inode *inode, struct file *file) file->private_data = up; - ret = 0; -out: - unlock_kernel(); - return ret; + return 0; } static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence) @@ -528,9 +522,9 @@ static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence) struct uhci_debug *up; loff_t new = -1; - lock_kernel(); up = file->private_data; + /* XXX: atomic 64bit seek access, but that needs to be fixed in the VFS */ switch (whence) { case 0: new = off; @@ -539,11 +533,10 @@ static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence) new = file->f_pos + off; break; } - if (new < 0 || new > up->size) { - unlock_kernel(); + + if (new < 0 || new > up->size) return -EINVAL; - } - unlock_kernel(); + return (file->f_pos = new); } @@ -564,7 +557,6 @@ static int uhci_debug_release(struct inode *inode, struct file *file) return 0; } -#undef uhci_debug_operations static const struct file_operations uhci_debug_operations = { .owner = THIS_MODULE, .open = uhci_debug_open, @@ -572,6 +564,7 @@ static const struct file_operations uhci_debug_operations = { .read = uhci_debug_read, .release = uhci_debug_release, }; +#define UHCI_DEBUG_OPS #endif /* CONFIG_DEBUG_FS */ diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 6637e52..f52d04d 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -140,7 +140,7 @@ static void finish_reset(struct uhci_hcd *uhci) uhci->rh_state = UHCI_RH_RESET; uhci->is_stopped = UHCI_IS_STOPPED; uhci_to_hcd(uhci)->state = HC_STATE_HALT; - uhci_to_hcd(uhci)->poll_rh = 0; + clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); uhci->dead = 0; /* Full reset resurrects the controller */ } @@ -176,6 +176,8 @@ static void check_and_reset_hc(struct uhci_hcd *uhci) */ static void configure_hc(struct uhci_hcd *uhci) { + struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); + /* Set the frame length to the default: 1 ms exactly */ outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF); @@ -191,8 +193,11 @@ static void configure_hc(struct uhci_hcd *uhci) mb(); /* Enable PIRQ */ - pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, - USBLEGSUP_DEFAULT); + pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT); + + /* Disable platform-specific non-PME# wakeup */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + pci_write_config_byte(pdev, USBRES_INTEL, 0); } @@ -344,7 +349,10 @@ __acquires(uhci->lock) /* If interrupts don't work and remote wakeup is enabled then * the suspended root hub needs to be polled. */ - uhci_to_hcd(uhci)->poll_rh = (!int_enable && wakeup_enable); + if (!int_enable && wakeup_enable) + set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); + else + clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); uhci_scan_schedule(uhci); uhci_fsbr_off(uhci); @@ -363,7 +371,7 @@ static void start_rh(struct uhci_hcd *uhci) uhci->io_addr + USBINTR); mb(); uhci->rh_state = UHCI_RH_RUNNING; - uhci_to_hcd(uhci)->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); } static void wakeup_rh(struct uhci_hcd *uhci) @@ -589,7 +597,7 @@ static int uhci_start(struct usb_hcd *hcd) struct uhci_hcd *uhci = hcd_to_uhci(hcd); int retval = -EBUSY; int i; - struct dentry *dentry; + struct dentry __maybe_unused *dentry; hcd->uses_new_polling = 1; @@ -599,18 +607,16 @@ static int uhci_start(struct usb_hcd *hcd) INIT_LIST_HEAD(&uhci->idle_qh_list); init_waitqueue_head(&uhci->waitqh); - if (DEBUG_CONFIGURED) { - dentry = debugfs_create_file(hcd->self.bus_name, - S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, - uhci, &uhci_debug_operations); - if (!dentry) { - dev_err(uhci_dev(uhci), "couldn't create uhci " - "debugfs entry\n"); - retval = -ENOMEM; - goto err_create_debug_entry; - } - uhci->dentry = dentry; +#ifdef UHCI_DEBUG_OPS + dentry = debugfs_create_file(hcd->self.bus_name, + S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, + uhci, &uhci_debug_operations); + if (!dentry) { + dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n"); + return -ENOMEM; } + uhci->dentry = dentry; +#endif uhci->frame = dma_alloc_coherent(uhci_dev(uhci), UHCI_NUMFRAMES * sizeof(*uhci->frame), @@ -691,7 +697,9 @@ static int uhci_start(struct usb_hcd *hcd) configure_hc(uhci); uhci->is_initialized = 1; + spin_lock_irq(&uhci->lock); start_rh(uhci); + spin_unlock_irq(&uhci->lock); return 0; /* @@ -722,7 +730,6 @@ err_alloc_frame_cpu: err_alloc_frame: debugfs_remove(uhci->dentry); -err_create_debug_entry: return retval; } @@ -731,7 +738,7 @@ static void uhci_stop(struct usb_hcd *hcd) struct uhci_hcd *uhci = hcd_to_uhci(hcd); spin_lock_irq(&uhci->lock); - if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && !uhci->dead) + if (HCD_HW_ACCESSIBLE(hcd) && !uhci->dead) uhci_hc_died(uhci); uhci_scan_schedule(uhci); spin_unlock_irq(&uhci->lock); @@ -748,7 +755,7 @@ static int uhci_rh_suspend(struct usb_hcd *hcd) int rc = 0; spin_lock_irq(&uhci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) rc = -ESHUTDOWN; else if (uhci->dead) ; /* Dead controllers tell no tales */ @@ -775,7 +782,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd) int rc = 0; spin_lock_irq(&uhci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) rc = -ESHUTDOWN; else if (!uhci->dead) wakeup_rh(uhci); @@ -783,15 +790,16 @@ static int uhci_rh_resume(struct usb_hcd *hcd) return rc; } -static int uhci_pci_suspend(struct usb_hcd *hcd) +static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); + struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); int rc = 0; dev_dbg(uhci_dev(uhci), "%s\n", __func__); spin_lock_irq(&uhci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead) + if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) goto done_okay; /* Already suspended or dead */ if (uhci->rh_state > UHCI_RH_SUSPENDED) { @@ -803,11 +811,15 @@ static int uhci_pci_suspend(struct usb_hcd *hcd) /* All PCI host controllers are required to disable IRQ generation * at the source, so we must turn off PIRQ. */ - pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0); - mb(); - hcd->poll_rh = 0; - - /* FIXME: Enable non-PME# remote wakeup? */ + pci_write_config_word(pdev, USBLEGSUP, 0); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* Enable platform-specific non-PME# wakeup */ + if (do_wakeup) { + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + pci_write_config_byte(pdev, USBRES_INTEL, + USBPORT1EN | USBPORT2EN); + } done_okay: clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -826,7 +838,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated) * even if the controller was dead. */ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - mb(); spin_lock_irq(&uhci->lock); @@ -834,8 +845,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated) if (hibernated) uhci_hc_died(uhci); - /* FIXME: Disable non-PME# remote wakeup? */ - /* The firmware or a boot kernel may have changed the controller * settings during a system wakeup. Check it and reconfigure * to avoid problems. @@ -845,22 +854,20 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated) /* If the controller was dead before, it's back alive now */ configure_hc(uhci); - if (uhci->rh_state == UHCI_RH_RESET) { - - /* The controller had to be reset */ + /* Tell the core if the controller had to be reset */ + if (uhci->rh_state == UHCI_RH_RESET) usb_root_hub_lost_power(hcd->self.root_hub); - suspend_rh(uhci, UHCI_RH_SUSPENDED); - } spin_unlock_irq(&uhci->lock); /* If interrupts don't work and remote wakeup is enabled then * the suspended root hub needs to be polled. */ - if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) { - hcd->poll_rh = 1; - usb_hcd_poll_rh_status(hcd); - } + if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* Does the root hub have a port wakeup pending? */ + usb_hcd_poll_rh_status(hcd); return 0; } #endif diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 26bd1b2..49bf279 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -67,12 +67,17 @@ #define USBPORTSC_RES3 0x4000 /* reserved, write zeroes */ #define USBPORTSC_RES4 0x8000 /* reserved, write zeroes */ -/* Legacy support register */ +/* PCI legacy support register */ #define USBLEGSUP 0xc0 #define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ #define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ #define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */ +/* PCI Intel-specific resume-enable register */ +#define USBRES_INTEL 0xc4 +#define USBPORT1EN 0x01 +#define USBPORT2EN 0x02 + #define UHCI_PTR_BITS cpu_to_le32(0x000F) #define UHCI_PTR_TERM cpu_to_le32(0x0001) #define UHCI_PTR_QH cpu_to_le32(0x0002) diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 8270055..6d59c0f 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -190,7 +190,7 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) spin_lock_irqsave(&uhci->lock, flags); uhci_scan_schedule(uhci); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead) + if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) goto done; uhci_check_ports(uhci); @@ -200,7 +200,7 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) case UHCI_RH_SUSPENDING: case UHCI_RH_SUSPENDED: /* if port change, ask to be resumed */ - if (status) + if (status || uhci->resuming_ports) usb_hcd_resume_root_hub(hcd); break; @@ -246,7 +246,7 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wPortChange, wPortStatus; unsigned long flags; - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead) + if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) return -ETIMEDOUT; spin_lock_irqsave(&uhci->lock, flags); diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index acd582c..d3ade40 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -565,7 +565,7 @@ static void uhci_unlink_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) qh->unlink_frame = uhci->frame_number; /* Force an interrupt so we know when the QH is fully unlinked */ - if (list_empty(&uhci->skel_unlink_qh->node)) + if (list_empty(&uhci->skel_unlink_qh->node) || uhci->is_stopped) uhci_set_next_interrupt(uhci); /* Move the QH from its old list to the end of the unlinking list */ @@ -1667,7 +1667,7 @@ static int uhci_advance_check(struct uhci_hcd *uhci, struct uhci_qh *qh) qh->advance_jiffies = jiffies; goto done; } - ret = 0; + ret = uhci->is_stopped; } /* The queue hasn't advanced; check for timeout */ diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index e0d3401..72b6892 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -68,7 +68,7 @@ static int whc_start(struct usb_hcd *usb_hcd) whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN); usb_hcd->uses_new_polling = 1; - usb_hcd->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); usb_hcd->state = HC_STATE_RUNNING; out: diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index ab5a14f..dc0ab83 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -475,7 +475,7 @@ static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *u || (prev_end & (WHCI_PAGE_SIZE-1)) || (dma_addr & (WHCI_PAGE_SIZE-1)) || std->len + WHCI_PAGE_SIZE > QTD_MAX_XFER_SIZE) { - if (std->len % qset->max_packet != 0) + if (std && std->len % qset->max_packet != 0) return -EINVAL; std = qset_new_std(whc, qset, urb, mem_flags); if (std == NULL) { diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 2eb658d..4e51343 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -391,49 +391,6 @@ struct xhci_ring *xhci_stream_id_to_ring( return ep->stream_info->stream_rings[stream_id]; } -struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci, - unsigned int slot_id, unsigned int ep_index, - unsigned int stream_id) -{ - struct xhci_virt_ep *ep; - - ep = &xhci->devs[slot_id]->eps[ep_index]; - /* Common case: no streams */ - if (!(ep->ep_state & EP_HAS_STREAMS)) - return ep->ring; - - if (stream_id == 0) { - xhci_warn(xhci, - "WARN: Slot ID %u, ep index %u has streams, " - "but URB has no stream ID.\n", - slot_id, ep_index); - return NULL; - } - - if (stream_id < ep->stream_info->num_streams) - return ep->stream_info->stream_rings[stream_id]; - - xhci_warn(xhci, - "WARN: Slot ID %u, ep index %u has " - "stream IDs 1 to %u allocated, " - "but stream ID %u is requested.\n", - slot_id, ep_index, - ep->stream_info->num_streams - 1, - stream_id); - return NULL; -} - -/* Get the right ring for the given URB. - * If the endpoint supports streams, boundary check the URB's stream ID. - * If the endpoint doesn't support streams, return the singular endpoint ring. - */ -struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, - struct urb *urb) -{ - return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id, - xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id); -} - #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING static int xhci_test_radix_tree(struct xhci_hcd *xhci, unsigned int num_streams, @@ -1112,8 +1069,18 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); /* Set up the endpoint ring */ - virt_dev->eps[ep_index].new_ring = - xhci_ring_alloc(xhci, 1, true, mem_flags); + /* + * Isochronous endpoint ring needs bigger size because one isoc URB + * carries multiple packets and it will insert multiple tds to the + * ring. + * This should be replaced with dynamic ring resizing in the future. + */ + if (usb_endpoint_xfer_isoc(&ep->desc)) + virt_dev->eps[ep_index].new_ring = + xhci_ring_alloc(xhci, 8, true, mem_flags); + else + virt_dev->eps[ep_index].new_ring = + xhci_ring_alloc(xhci, 1, true, mem_flags); if (!virt_dev->eps[ep_index].new_ring) { /* Attempt to use the ring cache */ if (virt_dev->num_rings_cached == 0) @@ -1124,6 +1091,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, virt_dev->num_rings_cached--; xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring); } + virt_dev->eps[ep_index].skip = false; ep_ring = virt_dev->eps[ep_index].new_ring; ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state; @@ -1389,6 +1357,22 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, return command; } +void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv) +{ + int last; + + if (!urb_priv) + return; + + last = urb_priv->length - 1; + if (last >= 0) { + int i; + for (i = 0; i <= last; i++) + kfree(urb_priv->td[i]); + } + kfree(urb_priv); +} + void xhci_free_command(struct xhci_hcd *xhci, struct xhci_command *command) { @@ -1588,7 +1572,7 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags) unsigned int num_tests; int i, ret; - num_tests = sizeof(simple_test_vector) / sizeof(simple_test_vector[0]); + num_tests = ARRAY_SIZE(simple_test_vector); for (i = 0; i < num_tests; i++) { ret = xhci_test_trb_in_td(xhci, xhci->event_ring->first_seg, @@ -1601,7 +1585,7 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags) return ret; } - num_tests = sizeof(complex_test_vector) / sizeof(complex_test_vector[0]); + num_tests = ARRAY_SIZE(complex_test_vector); for (i = 0; i < num_tests; i++) { ret = xhci_test_trb_in_td(xhci, complex_test_vector[i].input_seg, @@ -1617,6 +1601,29 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags) return 0; } +static void xhci_set_hc_event_deq(struct xhci_hcd *xhci) +{ + u64 temp; + dma_addr_t deq; + + deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, + xhci->event_ring->dequeue); + if (deq == 0 && !in_interrupt()) + xhci_warn(xhci, "WARN something wrong with SW event ring " + "dequeue ptr.\n"); + /* Update HC event ring dequeue pointer */ + temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp &= ERST_PTR_MASK; + /* Don't clear the EHB bit (which is RW1C) because + * there might be more events to service. + */ + temp &= ~ERST_EHB; + xhci_dbg(xhci, "// Write event ring dequeue pointer, " + "preserving EHB bit\n"); + xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp, + &xhci->ir_set->erst_dequeue); +} + int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) { diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 11482b6..f7efe02 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -53,6 +53,7 @@ static int xhci_pci_setup(struct usb_hcd *hcd) struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval; + u32 temp; hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2; @@ -93,6 +94,14 @@ static int xhci_pci_setup(struct usb_hcd *hcd) return retval; xhci_dbg(xhci, "Reset complete\n"); + temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); + if (HCC_64BIT_ADDR(temp)) { + xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); + } else { + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); + } + xhci_dbg(xhci, "Calling HCD init\n"); /* Initialize HCD and host controller data structures. */ retval = xhci_init(hcd); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index bfc99a9..bc3f4f4 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -301,28 +301,6 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, return 1; } -void xhci_set_hc_event_deq(struct xhci_hcd *xhci) -{ - u64 temp; - dma_addr_t deq; - - deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, - xhci->event_ring->dequeue); - if (deq == 0 && !in_interrupt()) - xhci_warn(xhci, "WARN something wrong with SW event ring " - "dequeue ptr.\n"); - /* Update HC event ring dequeue pointer */ - temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); - temp &= ERST_PTR_MASK; - /* Don't clear the EHB bit (which is RW1C) because - * there might be more events to service. - */ - temp &= ~ERST_EHB; - xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n"); - xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp, - &xhci->ir_set->erst_dequeue); -} - /* Ring the host controller doorbell after placing a command on the ring */ void xhci_ring_cmd_db(struct xhci_hcd *xhci) { @@ -359,11 +337,6 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci, field = xhci_readl(xhci, db_addr) & DB_MASK; field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id); xhci_writel(xhci, field, db_addr); - /* Flush PCI posted writes - FIXME Matthew Wilcox says this - * isn't time-critical and we shouldn't make the CPU wait for - * the flush. - */ - xhci_readl(xhci, db_addr); } } @@ -419,6 +392,50 @@ static struct xhci_segment *find_trb_seg( return cur_seg; } + +static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci, + unsigned int slot_id, unsigned int ep_index, + unsigned int stream_id) +{ + struct xhci_virt_ep *ep; + + ep = &xhci->devs[slot_id]->eps[ep_index]; + /* Common case: no streams */ + if (!(ep->ep_state & EP_HAS_STREAMS)) + return ep->ring; + + if (stream_id == 0) { + xhci_warn(xhci, + "WARN: Slot ID %u, ep index %u has streams, " + "but URB has no stream ID.\n", + slot_id, ep_index); + return NULL; + } + + if (stream_id < ep->stream_info->num_streams) + return ep->stream_info->stream_rings[stream_id]; + + xhci_warn(xhci, + "WARN: Slot ID %u, ep index %u has " + "stream IDs 1 to %u allocated, " + "but stream ID %u is requested.\n", + slot_id, ep_index, + ep->stream_info->num_streams - 1, + stream_id); + return NULL; +} + +/* Get the right ring for the given URB. + * If the endpoint supports streams, boundary check the URB's stream ID. + * If the endpoint doesn't support streams, return the singular endpoint ring. + */ +static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, + struct urb *urb) +{ + return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id, + xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id); +} + /* * Move the xHC's endpoint ring dequeue pointer past cur_td. * Record the new state of the xHC's endpoint ring dequeue segment, @@ -578,16 +595,24 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, struct xhci_td *cur_td, int status, char *adjective) { struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct urb *urb; + struct urb_priv *urb_priv; - cur_td->urb->hcpriv = NULL; - usb_hcd_unlink_urb_from_ep(hcd, cur_td->urb); - xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, cur_td->urb); + urb = cur_td->urb; + urb_priv = urb->hcpriv; + urb_priv->td_cnt++; - spin_unlock(&xhci->lock); - usb_hcd_giveback_urb(hcd, cur_td->urb, status); - kfree(cur_td); - spin_lock(&xhci->lock); - xhci_dbg(xhci, "%s URB given back\n", adjective); + /* Only giveback urb when this is the last td in urb */ + if (urb_priv->td_cnt == urb_priv->length) { + usb_hcd_unlink_urb_from_ep(hcd, urb); + xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb); + + spin_unlock(&xhci->lock); + usb_hcd_giveback_urb(hcd, urb, status); + xhci_urb_free_priv(xhci, urb_priv); + spin_lock(&xhci->lock); + xhci_dbg(xhci, "%s URB given back\n", adjective); + } } /* @@ -1132,7 +1157,6 @@ static void handle_port_status(struct xhci_hcd *xhci, /* Update event ring dequeue pointer before dropping the lock */ inc_deq(xhci, xhci->event_ring, true); - xhci_set_hc_event_deq(xhci); spin_unlock(&xhci->lock); /* Pass this up to the core */ @@ -1258,6 +1282,421 @@ int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code) } /* + * Finish the td processing, remove the td from td list; + * Return 1 if the urb can be given back. + */ +static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, + union xhci_trb *event_trb, struct xhci_transfer_event *event, + struct xhci_virt_ep *ep, int *status, bool skip) +{ + struct xhci_virt_device *xdev; + struct xhci_ring *ep_ring; + unsigned int slot_id; + int ep_index; + struct urb *urb = NULL; + struct xhci_ep_ctx *ep_ctx; + int ret = 0; + struct urb_priv *urb_priv; + u32 trb_comp_code; + + slot_id = TRB_TO_SLOT_ID(event->flags); + xdev = xhci->devs[slot_id]; + ep_index = TRB_TO_EP_ID(event->flags) - 1; + ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); + trb_comp_code = GET_COMP_CODE(event->transfer_len); + + if (skip) + goto td_cleanup; + + if (trb_comp_code == COMP_STOP_INVAL || + trb_comp_code == COMP_STOP) { + /* The Endpoint Stop Command completion will take care of any + * stopped TDs. A stopped TD may be restarted, so don't update + * the ring dequeue pointer or take this TD off any lists yet. + */ + ep->stopped_td = td; + ep->stopped_trb = event_trb; + return 0; + } else { + if (trb_comp_code == COMP_STALL) { + /* The transfer is completed from the driver's + * perspective, but we need to issue a set dequeue + * command for this stalled endpoint to move the dequeue + * pointer past the TD. We can't do that here because + * the halt condition must be cleared first. Let the + * USB class driver clear the stall later. + */ + ep->stopped_td = td; + ep->stopped_trb = event_trb; + ep->stopped_stream = ep_ring->stream_id; + } else if (xhci_requires_manual_halt_cleanup(xhci, + ep_ctx, trb_comp_code)) { + /* Other types of errors halt the endpoint, but the + * class driver doesn't call usb_reset_endpoint() unless + * the error is -EPIPE. Clear the halted status in the + * xHCI hardware manually. + */ + xhci_cleanup_halted_endpoint(xhci, + slot_id, ep_index, ep_ring->stream_id, + td, event_trb); + } else { + /* Update ring dequeue pointer */ + while (ep_ring->dequeue != td->last_trb) + inc_deq(xhci, ep_ring, false); + inc_deq(xhci, ep_ring, false); + } + +td_cleanup: + /* Clean up the endpoint's TD list */ + urb = td->urb; + urb_priv = urb->hcpriv; + + /* Do one last check of the actual transfer length. + * If the host controller said we transferred more data than + * the buffer length, urb->actual_length will be a very big + * number (since it's unsigned). Play it safe and say we didn't + * transfer anything. + */ + if (urb->actual_length > urb->transfer_buffer_length) { + xhci_warn(xhci, "URB transfer length is wrong, " + "xHC issue? req. len = %u, " + "act. len = %u\n", + urb->transfer_buffer_length, + urb->actual_length); + urb->actual_length = 0; + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + } + list_del(&td->td_list); + /* Was this TD slated to be cancelled but completed anyway? */ + if (!list_empty(&td->cancelled_td_list)) + list_del(&td->cancelled_td_list); + + urb_priv->td_cnt++; + /* Giveback the urb when all the tds are completed */ + if (urb_priv->td_cnt == urb_priv->length) + ret = 1; + } + + return ret; +} + +/* + * Process control tds, update urb status and actual_length. + */ +static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, + union xhci_trb *event_trb, struct xhci_transfer_event *event, + struct xhci_virt_ep *ep, int *status) +{ + struct xhci_virt_device *xdev; + struct xhci_ring *ep_ring; + unsigned int slot_id; + int ep_index; + struct xhci_ep_ctx *ep_ctx; + u32 trb_comp_code; + + slot_id = TRB_TO_SLOT_ID(event->flags); + xdev = xhci->devs[slot_id]; + ep_index = TRB_TO_EP_ID(event->flags) - 1; + ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); + trb_comp_code = GET_COMP_CODE(event->transfer_len); + + xhci_debug_trb(xhci, xhci->event_ring->dequeue); + switch (trb_comp_code) { + case COMP_SUCCESS: + if (event_trb == ep_ring->dequeue) { + xhci_warn(xhci, "WARN: Success on ctrl setup TRB " + "without IOC set??\n"); + *status = -ESHUTDOWN; + } else if (event_trb != td->last_trb) { + xhci_warn(xhci, "WARN: Success on ctrl data TRB " + "without IOC set??\n"); + *status = -ESHUTDOWN; + } else { + xhci_dbg(xhci, "Successful control transfer!\n"); + *status = 0; + } + break; + case COMP_SHORT_TX: + xhci_warn(xhci, "WARN: short transfer on control ep\n"); + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + break; + default: + if (!xhci_requires_manual_halt_cleanup(xhci, + ep_ctx, trb_comp_code)) + break; + xhci_dbg(xhci, "TRB error code %u, " + "halted endpoint index = %u\n", + trb_comp_code, ep_index); + /* else fall through */ + case COMP_STALL: + /* Did we transfer part of the data (middle) phase? */ + if (event_trb != ep_ring->dequeue && + event_trb != td->last_trb) + td->urb->actual_length = + td->urb->transfer_buffer_length + - TRB_LEN(event->transfer_len); + else + td->urb->actual_length = 0; + + xhci_cleanup_halted_endpoint(xhci, + slot_id, ep_index, 0, td, event_trb); + return finish_td(xhci, td, event_trb, event, ep, status, true); + } + /* + * Did we transfer any data, despite the errors that might have + * happened? I.e. did we get past the setup stage? + */ + if (event_trb != ep_ring->dequeue) { + /* The event was for the status stage */ + if (event_trb == td->last_trb) { + if (td->urb->actual_length != 0) { + /* Don't overwrite a previously set error code + */ + if ((*status == -EINPROGRESS || *status == 0) && + (td->urb->transfer_flags + & URB_SHORT_NOT_OK)) + /* Did we already see a short data + * stage? */ + *status = -EREMOTEIO; + } else { + td->urb->actual_length = + td->urb->transfer_buffer_length; + } + } else { + /* Maybe the event was for the data stage? */ + if (trb_comp_code != COMP_STOP_INVAL) { + /* We didn't stop on a link TRB in the middle */ + td->urb->actual_length = + td->urb->transfer_buffer_length - + TRB_LEN(event->transfer_len); + xhci_dbg(xhci, "Waiting for status " + "stage event\n"); + return 0; + } + } + } + + return finish_td(xhci, td, event_trb, event, ep, status, false); +} + +/* + * Process isochronous tds, update urb packet status and actual_length. + */ +static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, + union xhci_trb *event_trb, struct xhci_transfer_event *event, + struct xhci_virt_ep *ep, int *status) +{ + struct xhci_ring *ep_ring; + struct urb_priv *urb_priv; + int idx; + int len = 0; + int skip_td = 0; + union xhci_trb *cur_trb; + struct xhci_segment *cur_seg; + u32 trb_comp_code; + + ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + trb_comp_code = GET_COMP_CODE(event->transfer_len); + urb_priv = td->urb->hcpriv; + idx = urb_priv->td_cnt; + + if (ep->skip) { + /* The transfer is partly done */ + *status = -EXDEV; + td->urb->iso_frame_desc[idx].status = -EXDEV; + } else { + /* handle completion code */ + switch (trb_comp_code) { + case COMP_SUCCESS: + td->urb->iso_frame_desc[idx].status = 0; + xhci_dbg(xhci, "Successful isoc transfer!\n"); + break; + case COMP_SHORT_TX: + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + td->urb->iso_frame_desc[idx].status = + -EREMOTEIO; + else + td->urb->iso_frame_desc[idx].status = 0; + break; + case COMP_BW_OVER: + td->urb->iso_frame_desc[idx].status = -ECOMM; + skip_td = 1; + break; + case COMP_BUFF_OVER: + case COMP_BABBLE: + td->urb->iso_frame_desc[idx].status = -EOVERFLOW; + skip_td = 1; + break; + case COMP_STALL: + td->urb->iso_frame_desc[idx].status = -EPROTO; + skip_td = 1; + break; + case COMP_STOP: + case COMP_STOP_INVAL: + break; + default: + td->urb->iso_frame_desc[idx].status = -1; + break; + } + } + + /* calc actual length */ + if (ep->skip) { + td->urb->iso_frame_desc[idx].actual_length = 0; + return finish_td(xhci, td, event_trb, event, ep, status, true); + } + + if (trb_comp_code == COMP_SUCCESS || skip_td == 1) { + td->urb->iso_frame_desc[idx].actual_length = + td->urb->iso_frame_desc[idx].length; + td->urb->actual_length += + td->urb->iso_frame_desc[idx].length; + } else { + for (cur_trb = ep_ring->dequeue, + cur_seg = ep_ring->deq_seg; cur_trb != event_trb; + next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) { + if ((cur_trb->generic.field[3] & + TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) && + (cur_trb->generic.field[3] & + TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK)) + len += + TRB_LEN(cur_trb->generic.field[2]); + } + len += TRB_LEN(cur_trb->generic.field[2]) - + TRB_LEN(event->transfer_len); + + if (trb_comp_code != COMP_STOP_INVAL) { + td->urb->iso_frame_desc[idx].actual_length = len; + td->urb->actual_length += len; + } + } + + if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS) + *status = 0; + + return finish_td(xhci, td, event_trb, event, ep, status, false); +} + +/* + * Process bulk and interrupt tds, update urb status and actual_length. + */ +static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, + union xhci_trb *event_trb, struct xhci_transfer_event *event, + struct xhci_virt_ep *ep, int *status) +{ + struct xhci_ring *ep_ring; + union xhci_trb *cur_trb; + struct xhci_segment *cur_seg; + u32 trb_comp_code; + + ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + trb_comp_code = GET_COMP_CODE(event->transfer_len); + + switch (trb_comp_code) { + case COMP_SUCCESS: + /* Double check that the HW transferred everything. */ + if (event_trb != td->last_trb) { + xhci_warn(xhci, "WARN Successful completion " + "on short TX\n"); + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + } else { + if (usb_endpoint_xfer_bulk(&td->urb->ep->desc)) + xhci_dbg(xhci, "Successful bulk " + "transfer!\n"); + else + xhci_dbg(xhci, "Successful interrupt " + "transfer!\n"); + *status = 0; + } + break; + case COMP_SHORT_TX: + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + break; + default: + /* Others already handled above */ + break; + } + dev_dbg(&td->urb->dev->dev, + "ep %#x - asked for %d bytes, " + "%d bytes untransferred\n", + td->urb->ep->desc.bEndpointAddress, + td->urb->transfer_buffer_length, + TRB_LEN(event->transfer_len)); + /* Fast path - was this the last TRB in the TD for this URB? */ + if (event_trb == td->last_trb) { + if (TRB_LEN(event->transfer_len) != 0) { + td->urb->actual_length = + td->urb->transfer_buffer_length - + TRB_LEN(event->transfer_len); + if (td->urb->transfer_buffer_length < + td->urb->actual_length) { + xhci_warn(xhci, "HC gave bad length " + "of %d bytes left\n", + TRB_LEN(event->transfer_len)); + td->urb->actual_length = 0; + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + } + /* Don't overwrite a previously set error code */ + if (*status == -EINPROGRESS) { + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + } + } else { + td->urb->actual_length = + td->urb->transfer_buffer_length; + /* Ignore a short packet completion if the + * untransferred length was zero. + */ + if (*status == -EREMOTEIO) + *status = 0; + } + } else { + /* Slow path - walk the list, starting from the dequeue + * pointer, to get the actual length transferred. + */ + td->urb->actual_length = 0; + for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg; + cur_trb != event_trb; + next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) { + if ((cur_trb->generic.field[3] & + TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) && + (cur_trb->generic.field[3] & + TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK)) + td->urb->actual_length += + TRB_LEN(cur_trb->generic.field[2]); + } + /* If the ring didn't stop on a Link or No-op TRB, add + * in the actual bytes transferred from the Normal TRB + */ + if (trb_comp_code != COMP_STOP_INVAL) + td->urb->actual_length += + TRB_LEN(cur_trb->generic.field[2]) - + TRB_LEN(event->transfer_len); + } + + return finish_td(xhci, td, event_trb, event, ep, status, false); +} + +/* * If this function returns an error condition, it means it got a Transfer * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address. * At this point, the host controller is probably hosed and should be reset. @@ -1276,10 +1715,11 @@ static int handle_tx_event(struct xhci_hcd *xhci, union xhci_trb *event_trb; struct urb *urb = NULL; int status = -EINPROGRESS; + struct urb_priv *urb_priv; struct xhci_ep_ctx *ep_ctx; u32 trb_comp_code; + int ret = 0; - xhci_dbg(xhci, "In %s\n", __func__); slot_id = TRB_TO_SLOT_ID(event->flags); xdev = xhci->devs[slot_id]; if (!xdev) { @@ -1293,51 +1733,16 @@ static int handle_tx_event(struct xhci_hcd *xhci, ep = &xdev->eps[ep_index]; ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); - if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) { + if (!ep_ring || + (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) { xhci_err(xhci, "ERROR Transfer event for disabled endpoint " "or incorrect stream ring\n"); return -ENODEV; } event_dma = event->buffer; - /* This TRB should be in the TD at the head of this ring's TD list */ - xhci_dbg(xhci, "%s - checking for list empty\n", __func__); - if (list_empty(&ep_ring->td_list)) { - xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n", - TRB_TO_SLOT_ID(event->flags), ep_index); - xhci_dbg(xhci, "Event TRB with TRB type ID %u\n", - (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10); - xhci_print_trb_offsets(xhci, (union xhci_trb *) event); - urb = NULL; - goto cleanup; - } - xhci_dbg(xhci, "%s - getting list entry\n", __func__); - td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list); - - /* Is this a TRB in the currently executing TD? */ - xhci_dbg(xhci, "%s - looking for TD\n", __func__); - event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, - td->last_trb, event_dma); - xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg); - if (!event_seg) { - /* HC is busted, give up! */ - xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n"); - return -ESHUTDOWN; - } - event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)]; - xhci_dbg(xhci, "Event TRB with TRB type ID %u\n", - (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10); - xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n", - lower_32_bits(event->buffer)); - xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n", - upper_32_bits(event->buffer)); - xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n", - (unsigned int) event->transfer_len); - xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n", - (unsigned int) event->flags); - - /* Look for common error cases */ trb_comp_code = GET_COMP_CODE(event->transfer_len); + /* Look for common error cases */ switch (trb_comp_code) { /* Skip codes that require special handling depending on * transfer type @@ -1373,278 +1778,156 @@ static int handle_tx_event(struct xhci_hcd *xhci, xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n"); status = -ENOSR; break; + case COMP_BW_OVER: + xhci_warn(xhci, "WARN: bandwidth overrun event on endpoint\n"); + break; + case COMP_BUFF_OVER: + xhci_warn(xhci, "WARN: buffer overrun event on endpoint\n"); + break; + case COMP_UNDERRUN: + /* + * When the Isoch ring is empty, the xHC will generate + * a Ring Overrun Event for IN Isoch endpoint or Ring + * Underrun Event for OUT Isoch endpoint. + */ + xhci_dbg(xhci, "underrun event on endpoint\n"); + if (!list_empty(&ep_ring->td_list)) + xhci_dbg(xhci, "Underrun Event for slot %d ep %d " + "still with TDs queued?\n", + TRB_TO_SLOT_ID(event->flags), ep_index); + goto cleanup; + case COMP_OVERRUN: + xhci_dbg(xhci, "overrun event on endpoint\n"); + if (!list_empty(&ep_ring->td_list)) + xhci_dbg(xhci, "Overrun Event for slot %d ep %d " + "still with TDs queued?\n", + TRB_TO_SLOT_ID(event->flags), ep_index); + goto cleanup; + case COMP_MISSED_INT: + /* + * When encounter missed service error, one or more isoc tds + * may be missed by xHC. + * Set skip flag of the ep_ring; Complete the missed tds as + * short transfer when process the ep_ring next time. + */ + ep->skip = true; + xhci_dbg(xhci, "Miss service interval error, set skip flag\n"); + goto cleanup; default: if (xhci_is_vendor_info_code(xhci, trb_comp_code)) { status = 0; break; } - xhci_warn(xhci, "ERROR Unknown event condition, HC probably busted\n"); - urb = NULL; + xhci_warn(xhci, "ERROR Unknown event condition, HC probably " + "busted\n"); goto cleanup; } - /* Now update the urb's actual_length and give back to the core */ - /* Was this a control transfer? */ - if (usb_endpoint_xfer_control(&td->urb->ep->desc)) { - xhci_debug_trb(xhci, xhci->event_ring->dequeue); - switch (trb_comp_code) { - case COMP_SUCCESS: - if (event_trb == ep_ring->dequeue) { - xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n"); - status = -ESHUTDOWN; - } else if (event_trb != td->last_trb) { - xhci_warn(xhci, "WARN: Success on ctrl data TRB without IOC set??\n"); - status = -ESHUTDOWN; - } else { - xhci_dbg(xhci, "Successful control transfer!\n"); - status = 0; - } - break; - case COMP_SHORT_TX: - xhci_warn(xhci, "WARN: short transfer on control ep\n"); - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; - break; - default: - if (!xhci_requires_manual_halt_cleanup(xhci, - ep_ctx, trb_comp_code)) - break; - xhci_dbg(xhci, "TRB error code %u, " - "halted endpoint index = %u\n", - trb_comp_code, ep_index); - /* else fall through */ - case COMP_STALL: - /* Did we transfer part of the data (middle) phase? */ - if (event_trb != ep_ring->dequeue && - event_trb != td->last_trb) - td->urb->actual_length = - td->urb->transfer_buffer_length - - TRB_LEN(event->transfer_len); - else - td->urb->actual_length = 0; - - xhci_cleanup_halted_endpoint(xhci, - slot_id, ep_index, 0, td, event_trb); - goto td_cleanup; - } - /* - * Did we transfer any data, despite the errors that might have - * happened? I.e. did we get past the setup stage? + do { + /* This TRB should be in the TD at the head of this ring's + * TD list. */ - if (event_trb != ep_ring->dequeue) { - /* The event was for the status stage */ - if (event_trb == td->last_trb) { - if (td->urb->actual_length != 0) { - /* Don't overwrite a previously set error code */ - if ((status == -EINPROGRESS || - status == 0) && - (td->urb->transfer_flags - & URB_SHORT_NOT_OK)) - /* Did we already see a short data stage? */ - status = -EREMOTEIO; - } else { - td->urb->actual_length = - td->urb->transfer_buffer_length; - } - } else { - /* Maybe the event was for the data stage? */ - if (trb_comp_code != COMP_STOP_INVAL) { - /* We didn't stop on a link TRB in the middle */ - td->urb->actual_length = - td->urb->transfer_buffer_length - - TRB_LEN(event->transfer_len); - xhci_dbg(xhci, "Waiting for status stage event\n"); - urb = NULL; - goto cleanup; - } + if (list_empty(&ep_ring->td_list)) { + xhci_warn(xhci, "WARN Event TRB for slot %d ep %d " + "with no TDs queued?\n", + TRB_TO_SLOT_ID(event->flags), ep_index); + xhci_dbg(xhci, "Event TRB with TRB type ID %u\n", + (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10); + xhci_print_trb_offsets(xhci, (union xhci_trb *) event); + if (ep->skip) { + ep->skip = false; + xhci_dbg(xhci, "td_list is empty while skip " + "flag set. Clear skip flag.\n"); } + ret = 0; + goto cleanup; } - } else { - switch (trb_comp_code) { - case COMP_SUCCESS: - /* Double check that the HW transferred everything. */ - if (event_trb != td->last_trb) { - xhci_warn(xhci, "WARN Successful completion " - "on short TX\n"); - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; - } else { - if (usb_endpoint_xfer_bulk(&td->urb->ep->desc)) - xhci_dbg(xhci, "Successful bulk " - "transfer!\n"); - else - xhci_dbg(xhci, "Successful interrupt " - "transfer!\n"); - status = 0; - } - break; - case COMP_SHORT_TX: - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; - break; - default: - /* Others already handled above */ - break; + + td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list); + /* Is this a TRB in the currently executing TD? */ + event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, + td->last_trb, event_dma); + if (event_seg && ep->skip) { + xhci_dbg(xhci, "Found td. Clear skip flag.\n"); + ep->skip = false; + } + if (!event_seg && + (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc))) { + /* HC is busted, give up! */ + xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not " + "part of current TD\n"); + return -ESHUTDOWN; } - dev_dbg(&td->urb->dev->dev, - "ep %#x - asked for %d bytes, " - "%d bytes untransferred\n", - td->urb->ep->desc.bEndpointAddress, - td->urb->transfer_buffer_length, - TRB_LEN(event->transfer_len)); - /* Fast path - was this the last TRB in the TD for this URB? */ - if (event_trb == td->last_trb) { - if (TRB_LEN(event->transfer_len) != 0) { - td->urb->actual_length = - td->urb->transfer_buffer_length - - TRB_LEN(event->transfer_len); - if (td->urb->transfer_buffer_length < - td->urb->actual_length) { - xhci_warn(xhci, "HC gave bad length " - "of %d bytes left\n", - TRB_LEN(event->transfer_len)); - td->urb->actual_length = 0; - if (td->urb->transfer_flags & - URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; - } - /* Don't overwrite a previously set error code */ - if (status == -EINPROGRESS) { - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; - } - } else { - td->urb->actual_length = td->urb->transfer_buffer_length; - /* Ignore a short packet completion if the - * untransferred length was zero. - */ - if (status == -EREMOTEIO) - status = 0; - } - } else { - /* Slow path - walk the list, starting from the dequeue - * pointer, to get the actual length transferred. - */ - union xhci_trb *cur_trb; - struct xhci_segment *cur_seg; - td->urb->actual_length = 0; - for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg; - cur_trb != event_trb; - next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) { - if ((cur_trb->generic.field[3] & - TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) && - (cur_trb->generic.field[3] & - TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK)) - td->urb->actual_length += - TRB_LEN(cur_trb->generic.field[2]); - } - /* If the ring didn't stop on a Link or No-op TRB, add - * in the actual bytes transferred from the Normal TRB + if (event_seg) { + event_trb = &event_seg->trbs[(event_dma - + event_seg->dma) / sizeof(*event_trb)]; + /* + * No-op TRB should not trigger interrupts. + * If event_trb is a no-op TRB, it means the + * corresponding TD has been cancelled. Just ignore + * the TD. */ - if (trb_comp_code != COMP_STOP_INVAL) - td->urb->actual_length += - TRB_LEN(cur_trb->generic.field[2]) - - TRB_LEN(event->transfer_len); + if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK) + == TRB_TYPE(TRB_TR_NOOP)) { + xhci_dbg(xhci, "event_trb is a no-op TRB. " + "Skip it\n"); + goto cleanup; + } } - } - if (trb_comp_code == COMP_STOP_INVAL || - trb_comp_code == COMP_STOP) { - /* The Endpoint Stop Command completion will take care of any - * stopped TDs. A stopped TD may be restarted, so don't update - * the ring dequeue pointer or take this TD off any lists yet. + + /* Now update the urb's actual_length and give back to + * the core */ - ep->stopped_td = td; - ep->stopped_trb = event_trb; - } else { - if (trb_comp_code == COMP_STALL) { - /* The transfer is completed from the driver's - * perspective, but we need to issue a set dequeue - * command for this stalled endpoint to move the dequeue - * pointer past the TD. We can't do that here because - * the halt condition must be cleared first. Let the - * USB class driver clear the stall later. - */ - ep->stopped_td = td; - ep->stopped_trb = event_trb; - ep->stopped_stream = ep_ring->stream_id; - } else if (xhci_requires_manual_halt_cleanup(xhci, - ep_ctx, trb_comp_code)) { - /* Other types of errors halt the endpoint, but the - * class driver doesn't call usb_reset_endpoint() unless - * the error is -EPIPE. Clear the halted status in the - * xHCI hardware manually. - */ - xhci_cleanup_halted_endpoint(xhci, - slot_id, ep_index, ep_ring->stream_id, td, event_trb); - } else { - /* Update ring dequeue pointer */ - while (ep_ring->dequeue != td->last_trb) - inc_deq(xhci, ep_ring, false); - inc_deq(xhci, ep_ring, false); - } + if (usb_endpoint_xfer_control(&td->urb->ep->desc)) + ret = process_ctrl_td(xhci, td, event_trb, event, ep, + &status); + else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc)) + ret = process_isoc_td(xhci, td, event_trb, event, ep, + &status); + else + ret = process_bulk_intr_td(xhci, td, event_trb, event, + ep, &status); -td_cleanup: - /* Clean up the endpoint's TD list */ - urb = td->urb; - /* Do one last check of the actual transfer length. - * If the host controller said we transferred more data than - * the buffer length, urb->actual_length will be a very big - * number (since it's unsigned). Play it safe and say we didn't - * transfer anything. +cleanup: + /* + * Do not update event ring dequeue pointer if ep->skip is set. + * Will roll back to continue process missed tds. */ - if (urb->actual_length > urb->transfer_buffer_length) { - xhci_warn(xhci, "URB transfer length is wrong, " - "xHC issue? req. len = %u, " - "act. len = %u\n", - urb->transfer_buffer_length, - urb->actual_length); - urb->actual_length = 0; - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; + if (trb_comp_code == COMP_MISSED_INT || !ep->skip) { + inc_deq(xhci, xhci->event_ring, true); } - list_del(&td->td_list); - /* Was this TD slated to be cancelled but completed anyway? */ - if (!list_empty(&td->cancelled_td_list)) - list_del(&td->cancelled_td_list); - /* Leave the TD around for the reset endpoint function to use - * (but only if it's not a control endpoint, since we already - * queued the Set TR dequeue pointer command for stalled - * control endpoints). - */ - if (usb_endpoint_xfer_control(&urb->ep->desc) || - (trb_comp_code != COMP_STALL && - trb_comp_code != COMP_BABBLE)) { - kfree(td); + if (ret) { + urb = td->urb; + urb_priv = urb->hcpriv; + /* Leave the TD around for the reset endpoint function + * to use(but only if it's not a control endpoint, + * since we already queued the Set TR dequeue pointer + * command for stalled control endpoints). + */ + if (usb_endpoint_xfer_control(&urb->ep->desc) || + (trb_comp_code != COMP_STALL && + trb_comp_code != COMP_BABBLE)) + xhci_urb_free_priv(xhci, urb_priv); + + usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb); + xhci_dbg(xhci, "Giveback URB %p, len = %d, " + "status = %d\n", + urb, urb->actual_length, status); + spin_unlock(&xhci->lock); + usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status); + spin_lock(&xhci->lock); } - urb->hcpriv = NULL; - } -cleanup: - inc_deq(xhci, xhci->event_ring, true); - xhci_set_hc_event_deq(xhci); - /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */ - if (urb) { - usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb); - xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n", - urb, urb->actual_length, status); - spin_unlock(&xhci->lock); - usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status); - spin_lock(&xhci->lock); - } + /* + * If ep->skip is set, it means there are missed tds on the + * endpoint ring need to take care of. + * Process them as short transfer until reach the td pointed by + * the event. + */ + } while (ep->skip && trb_comp_code != COMP_MISSED_INT); + return 0; } @@ -1652,7 +1935,7 @@ cleanup: * This function handles all OS-owned events on the event ring. It may drop * xhci->lock between event processing (e.g. to pass up port status changes). */ -void xhci_handle_event(struct xhci_hcd *xhci) +static void xhci_handle_event(struct xhci_hcd *xhci) { union xhci_trb *event; int update_ptrs = 1; @@ -1710,15 +1993,130 @@ void xhci_handle_event(struct xhci_hcd *xhci) return; } - if (update_ptrs) { - /* Update SW and HC event ring dequeue pointer */ + if (update_ptrs) + /* Update SW event ring dequeue pointer */ inc_deq(xhci, xhci->event_ring, true); - xhci_set_hc_event_deq(xhci); - } + /* Are there more items on the event ring? */ xhci_handle_event(xhci); } +/* + * xHCI spec says we can get an interrupt, and if the HC has an error condition, + * we might get bad data out of the event ring. Section 4.10.2.7 has a list of + * indicators of an event TRB error, but we check the status *first* to be safe. + */ +irqreturn_t xhci_irq(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + u32 status; + union xhci_trb *trb; + u64 temp_64; + union xhci_trb *event_ring_deq; + dma_addr_t deq; + + spin_lock(&xhci->lock); + trb = xhci->event_ring->dequeue; + /* Check if the xHC generated the interrupt, or the irq is shared */ + status = xhci_readl(xhci, &xhci->op_regs->status); + if (status == 0xffffffff) + goto hw_died; + + if (!(status & STS_EINT)) { + spin_unlock(&xhci->lock); + xhci_warn(xhci, "Spurious interrupt.\n"); + return IRQ_NONE; + } + xhci_dbg(xhci, "op reg status = %08x\n", status); + xhci_dbg(xhci, "Event ring dequeue ptr:\n"); + xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n", + (unsigned long long) + xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb), + lower_32_bits(trb->link.segment_ptr), + upper_32_bits(trb->link.segment_ptr), + (unsigned int) trb->link.intr_target, + (unsigned int) trb->link.control); + + if (status & STS_FATAL) { + xhci_warn(xhci, "WARNING: Host System Error\n"); + xhci_halt(xhci); +hw_died: + xhci_to_hcd(xhci)->state = HC_STATE_HALT; + spin_unlock(&xhci->lock); + return -ESHUTDOWN; + } + + /* + * Clear the op reg interrupt status first, + * so we can receive interrupts from other MSI-X interrupters. + * Write 1 to clear the interrupt status. + */ + status |= STS_EINT; + xhci_writel(xhci, status, &xhci->op_regs->status); + /* FIXME when MSI-X is supported and there are multiple vectors */ + /* Clear the MSI-X event interrupt status */ + + if (hcd->irq != -1) { + u32 irq_pending; + /* Acknowledge the PCI interrupt */ + irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); + irq_pending |= 0x3; + xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending); + } + + if (xhci->xhc_state & XHCI_STATE_DYING) { + xhci_dbg(xhci, "xHCI dying, ignoring interrupt. " + "Shouldn't IRQs be disabled?\n"); + /* Clear the event handler busy flag (RW1C); + * the event ring should be empty. + */ + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, temp_64 | ERST_EHB, + &xhci->ir_set->erst_dequeue); + spin_unlock(&xhci->lock); + + return IRQ_HANDLED; + } + + event_ring_deq = xhci->event_ring->dequeue; + /* FIXME this should be a delayed service routine + * that clears the EHB. + */ + xhci_handle_event(xhci); + + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + /* If necessary, update the HW's version of the event ring deq ptr. */ + if (event_ring_deq != xhci->event_ring->dequeue) { + deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, + xhci->event_ring->dequeue); + if (deq == 0) + xhci_warn(xhci, "WARN something wrong with SW event " + "ring dequeue ptr.\n"); + /* Update HC event ring dequeue pointer */ + temp_64 &= ERST_PTR_MASK; + temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK); + } + + /* Clear the event handler busy flag (RW1C); event ring is empty. */ + temp_64 |= ERST_EHB; + xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue); + + spin_unlock(&xhci->lock); + + return IRQ_HANDLED; +} + +irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd) +{ + irqreturn_t ret; + + set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + + ret = xhci_irq(hcd); + + return ret; +} + /**** Endpoint Ring Operations ****/ /* @@ -1827,10 +2225,12 @@ static int prepare_transfer(struct xhci_hcd *xhci, unsigned int stream_id, unsigned int num_trbs, struct urb *urb, - struct xhci_td **td, + unsigned int td_index, gfp_t mem_flags) { int ret; + struct urb_priv *urb_priv; + struct xhci_td *td; struct xhci_ring *ep_ring; struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); @@ -1846,24 +2246,29 @@ static int prepare_transfer(struct xhci_hcd *xhci, num_trbs, mem_flags); if (ret) return ret; - *td = kzalloc(sizeof(struct xhci_td), mem_flags); - if (!*td) - return -ENOMEM; - INIT_LIST_HEAD(&(*td)->td_list); - INIT_LIST_HEAD(&(*td)->cancelled_td_list); - ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb); - if (unlikely(ret)) { - kfree(*td); - return ret; + urb_priv = urb->hcpriv; + td = urb_priv->td[td_index]; + + INIT_LIST_HEAD(&td->td_list); + INIT_LIST_HEAD(&td->cancelled_td_list); + + if (td_index == 0) { + ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb); + if (unlikely(ret)) { + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; + return ret; + } } - (*td)->urb = urb; - urb->hcpriv = (void *) (*td); + td->urb = urb; /* Add this TD to the tail of the endpoint ring's TD list */ - list_add_tail(&(*td)->td_list, &ep_ring->td_list); - (*td)->start_seg = ep_ring->enq_seg; - (*td)->first_trb = ep_ring->enqueue; + list_add_tail(&td->td_list, &ep_ring->td_list); + td->start_seg = ep_ring->enq_seg; + td->first_trb = ep_ring->enqueue; + + urb_priv->td[td_index] = td; return 0; } @@ -2002,6 +2407,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, { struct xhci_ring *ep_ring; unsigned int num_trbs; + struct urb_priv *urb_priv; struct xhci_td *td; struct scatterlist *sg; int num_sgs; @@ -2022,9 +2428,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, &td, mem_flags); + num_trbs, urb, 0, mem_flags); if (trb_buff_len < 0) return trb_buff_len; + + urb_priv = urb->hcpriv; + td = urb_priv->td[0]; + /* * Don't give the first TRB to the hardware (by toggling the cycle bit) * until we've finished creating all the other TRBs. The ring's cycle @@ -2145,6 +2555,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index) { struct xhci_ring *ep_ring; + struct urb_priv *urb_priv; struct xhci_td *td; int num_trbs; struct xhci_generic_trb *start_trb; @@ -2190,10 +2601,13 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, &td, mem_flags); + num_trbs, urb, 0, mem_flags); if (ret < 0) return ret; + urb_priv = urb->hcpriv; + td = urb_priv->td[0]; + /* * Don't give the first TRB to the hardware (by toggling the cycle bit) * until we've finished creating all the other TRBs. The ring's cycle @@ -2279,6 +2693,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct xhci_generic_trb *start_trb; int start_cycle; u32 field, length_field; + struct urb_priv *urb_priv; struct xhci_td *td; ep_ring = xhci_urb_to_transfer_ring(xhci, urb); @@ -2306,10 +2721,13 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs++; ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, &td, mem_flags); + num_trbs, urb, 0, mem_flags); if (ret < 0) return ret; + urb_priv = urb->hcpriv; + td = urb_priv->td[0]; + /* * Don't give the first TRB to the hardware (by toggling the cycle bit) * until we've finished creating all the other TRBs. The ring's cycle @@ -2366,6 +2784,224 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, return 0; } +static int count_isoc_trbs_needed(struct xhci_hcd *xhci, + struct urb *urb, int i) +{ + int num_trbs = 0; + u64 addr, td_len, running_total; + + addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset); + td_len = urb->iso_frame_desc[i].length; + + running_total = TRB_MAX_BUFF_SIZE - + (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + if (running_total != 0) + num_trbs++; + + while (running_total < td_len) { + num_trbs++; + running_total += TRB_MAX_BUFF_SIZE; + } + + return num_trbs; +} + +/* This is for isoc transfer */ +static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + struct urb *urb, int slot_id, unsigned int ep_index) +{ + struct xhci_ring *ep_ring; + struct urb_priv *urb_priv; + struct xhci_td *td; + int num_tds, trbs_per_td; + struct xhci_generic_trb *start_trb; + bool first_trb; + int start_cycle; + u32 field, length_field; + int running_total, trb_buff_len, td_len, td_remain_len, ret; + u64 start_addr, addr; + int i, j; + + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; + + num_tds = urb->number_of_packets; + if (num_tds < 1) { + xhci_dbg(xhci, "Isoc URB with zero packets?\n"); + return -EINVAL; + } + + if (!in_interrupt()) + dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d)," + " addr = %#llx, num_tds = %d\n", + urb->ep->desc.bEndpointAddress, + urb->transfer_buffer_length, + urb->transfer_buffer_length, + (unsigned long long)urb->transfer_dma, + num_tds); + + start_addr = (u64) urb->transfer_dma; + start_trb = &ep_ring->enqueue->generic; + start_cycle = ep_ring->cycle_state; + + /* Queue the first TRB, even if it's zero-length */ + for (i = 0; i < num_tds; i++) { + first_trb = true; + + running_total = 0; + addr = start_addr + urb->iso_frame_desc[i].offset; + td_len = urb->iso_frame_desc[i].length; + td_remain_len = td_len; + + trbs_per_td = count_isoc_trbs_needed(xhci, urb, i); + + ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, + urb->stream_id, trbs_per_td, urb, i, mem_flags); + if (ret < 0) + return ret; + + urb_priv = urb->hcpriv; + td = urb_priv->td[i]; + + for (j = 0; j < trbs_per_td; j++) { + u32 remainder = 0; + field = 0; + + if (first_trb) { + /* Queue the isoc TRB */ + field |= TRB_TYPE(TRB_ISOC); + /* Assume URB_ISO_ASAP is set */ + field |= TRB_SIA; + if (i > 0) + field |= ep_ring->cycle_state; + first_trb = false; + } else { + /* Queue other normal TRBs */ + field |= TRB_TYPE(TRB_NORMAL); + field |= ep_ring->cycle_state; + } + + /* Chain all the TRBs together; clear the chain bit in + * the last TRB to indicate it's the last TRB in the + * chain. + */ + if (j < trbs_per_td - 1) { + field |= TRB_CHAIN; + } else { + td->last_trb = ep_ring->enqueue; + field |= TRB_IOC; + } + + /* Calculate TRB length */ + trb_buff_len = TRB_MAX_BUFF_SIZE - + (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + if (trb_buff_len > td_remain_len) + trb_buff_len = td_remain_len; + + remainder = xhci_td_remainder(td_len - running_total); + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); + queue_trb(xhci, ep_ring, false, false, + lower_32_bits(addr), + upper_32_bits(addr), + length_field, + /* We always want to know if the TRB was short, + * or we won't get an event when it completes. + * (Unless we use event data TRBs, which are a + * waste of space and HC resources.) + */ + field | TRB_ISP); + running_total += trb_buff_len; + + addr += trb_buff_len; + td_remain_len -= trb_buff_len; + } + + /* Check TD length */ + if (running_total != td_len) { + xhci_err(xhci, "ISOC TD length unmatch\n"); + return -EINVAL; + } + } + + wmb(); + start_trb->field[3] |= start_cycle; + + ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id); + return 0; +} + +/* + * Check transfer ring to guarantee there is enough room for the urb. + * Update ISO URB start_frame and interval. + * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to + * update the urb->start_frame by now. + * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input. + */ +int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, + struct urb *urb, int slot_id, unsigned int ep_index) +{ + struct xhci_virt_device *xdev; + struct xhci_ring *ep_ring; + struct xhci_ep_ctx *ep_ctx; + int start_frame; + int xhci_interval; + int ep_interval; + int num_tds, num_trbs, i; + int ret; + + xdev = xhci->devs[slot_id]; + ep_ring = xdev->eps[ep_index].ring; + ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); + + num_trbs = 0; + num_tds = urb->number_of_packets; + for (i = 0; i < num_tds; i++) + num_trbs += count_isoc_trbs_needed(xhci, urb, i); + + /* Check the ring to guarantee there is enough room for the whole urb. + * Do not insert any td of the urb to the ring if the check failed. + */ + ret = prepare_ring(xhci, ep_ring, ep_ctx->ep_info & EP_STATE_MASK, + num_trbs, mem_flags); + if (ret) + return ret; + + start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index); + start_frame &= 0x3fff; + + urb->start_frame = start_frame; + if (urb->dev->speed == USB_SPEED_LOW || + urb->dev->speed == USB_SPEED_FULL) + urb->start_frame >>= 3; + + xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info); + ep_interval = urb->interval; + /* Convert to microframes */ + if (urb->dev->speed == USB_SPEED_LOW || + urb->dev->speed == USB_SPEED_FULL) + ep_interval *= 8; + /* FIXME change this to a warning and a suggestion to use the new API + * to set the polling interval (once the API is added). + */ + if (xhci_interval != ep_interval) { + if (!printk_ratelimit()) + dev_dbg(&urb->dev->dev, "Driver uses different interval" + " (%d microframe%s) than xHCI " + "(%d microframe%s)\n", + ep_interval, + ep_interval == 1 ? "" : "s", + xhci_interval, + xhci_interval == 1 ? "" : "s"); + urb->interval = xhci_interval; + /* Convert back to frames for LS/FS devices */ + if (urb->dev->speed == USB_SPEED_LOW || + urb->dev->speed == USB_SPEED_FULL) + urb->interval /= 8; + } + return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); +} + /**** Command Ring Operations ****/ /* Generic function for queueing a command TRB on the command ring. diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 3998f72..d5c550e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -20,6 +20,7 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/pci.h> #include <linux/irq.h> #include <linux/log2.h> #include <linux/module.h> @@ -171,22 +172,84 @@ int xhci_reset(struct xhci_hcd *xhci) return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); } +/* + * Free IRQs + * free all IRQs request + */ +static void xhci_free_irq(struct xhci_hcd *xhci) +{ + int i; + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); -#if 0 -/* Set up MSI-X table for entry 0 (may claim other entries later) */ -static int xhci_setup_msix(struct xhci_hcd *xhci) + /* return if using legacy interrupt */ + if (xhci_to_hcd(xhci)->irq >= 0) + return; + + if (xhci->msix_entries) { + for (i = 0; i < xhci->msix_count; i++) + if (xhci->msix_entries[i].vector) + free_irq(xhci->msix_entries[i].vector, + xhci_to_hcd(xhci)); + } else if (pdev->irq >= 0) + free_irq(pdev->irq, xhci_to_hcd(xhci)); + + return; +} + +/* + * Set up MSI + */ +static int xhci_setup_msi(struct xhci_hcd *xhci) { int ret; + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + + ret = pci_enable_msi(pdev); + if (ret) { + xhci_err(xhci, "failed to allocate MSI entry\n"); + return ret; + } + + ret = request_irq(pdev->irq, (irq_handler_t)xhci_msi_irq, + 0, "xhci_hcd", xhci_to_hcd(xhci)); + if (ret) { + xhci_err(xhci, "disable MSI interrupt\n"); + pci_disable_msi(pdev); + } + + return ret; +} + +/* + * Set up MSI-X + */ +static int xhci_setup_msix(struct xhci_hcd *xhci) +{ + int i, ret = 0; struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); - xhci->msix_count = 0; - /* XXX: did I do this right? ixgbe does kcalloc for more than one */ - xhci->msix_entries = kmalloc(sizeof(struct msix_entry), GFP_KERNEL); + /* + * calculate number of msi-x vectors supported. + * - HCS_MAX_INTRS: the max number of interrupts the host can handle, + * with max number of interrupters based on the xhci HCSPARAMS1. + * - num_online_cpus: maximum msi-x vectors per CPUs core. + * Add additional 1 vector to ensure always available interrupt. + */ + xhci->msix_count = min(num_online_cpus() + 1, + HCS_MAX_INTRS(xhci->hcs_params1)); + + xhci->msix_entries = + kmalloc((sizeof(struct msix_entry))*xhci->msix_count, + GFP_KERNEL); if (!xhci->msix_entries) { xhci_err(xhci, "Failed to allocate MSI-X entries\n"); return -ENOMEM; } - xhci->msix_entries[0].entry = 0; + + for (i = 0; i < xhci->msix_count; i++) { + xhci->msix_entries[i].entry = i; + xhci->msix_entries[i].vector = 0; + } ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count); if (ret) { @@ -194,20 +257,19 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) goto free_entries; } - /* - * Pass the xhci pointer value as the request_irq "cookie". - * If more irqs are added, this will need to be unique for each one. - */ - ret = request_irq(xhci->msix_entries[0].vector, &xhci_irq, 0, - "xHCI", xhci_to_hcd(xhci)); - if (ret) { - xhci_err(xhci, "Failed to allocate MSI-X interrupt\n"); - goto disable_msix; + for (i = 0; i < xhci->msix_count; i++) { + ret = request_irq(xhci->msix_entries[i].vector, + (irq_handler_t)xhci_msi_irq, + 0, "xhci_hcd", xhci_to_hcd(xhci)); + if (ret) + goto disable_msix; } - xhci_dbg(xhci, "Finished setting up MSI-X\n"); - return 0; + + return ret; disable_msix: + xhci_err(xhci, "disable MSI-X interrupt\n"); + xhci_free_irq(xhci); pci_disable_msix(pdev); free_entries: kfree(xhci->msix_entries); @@ -215,21 +277,23 @@ free_entries: return ret; } -/* XXX: code duplication; can xhci_setup_msix call this? */ /* Free any IRQs and disable MSI-X */ static void xhci_cleanup_msix(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); - if (!xhci->msix_entries) - return; - free_irq(xhci->msix_entries[0].vector, xhci); - pci_disable_msix(pdev); - kfree(xhci->msix_entries); - xhci->msix_entries = NULL; - xhci_dbg(xhci, "Finished cleaning up MSI-X\n"); + xhci_free_irq(xhci); + + if (xhci->msix_entries) { + pci_disable_msix(pdev); + kfree(xhci->msix_entries); + xhci->msix_entries = NULL; + } else { + pci_disable_msi(pdev); + } + + return; } -#endif /* * Initialize memory for HCD and xHC (one-time init). @@ -257,100 +321,8 @@ int xhci_init(struct usb_hcd *hcd) return retval; } -/* - * Called in interrupt context when there might be work - * queued on the event ring - * - * xhci->lock must be held by caller. - */ -static void xhci_work(struct xhci_hcd *xhci) -{ - u32 temp; - u64 temp_64; - - /* - * Clear the op reg interrupt status first, - * so we can receive interrupts from other MSI-X interrupters. - * Write 1 to clear the interrupt status. - */ - temp = xhci_readl(xhci, &xhci->op_regs->status); - temp |= STS_EINT; - xhci_writel(xhci, temp, &xhci->op_regs->status); - /* FIXME when MSI-X is supported and there are multiple vectors */ - /* Clear the MSI-X event interrupt status */ - - /* Acknowledge the interrupt */ - temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); - temp |= 0x3; - xhci_writel(xhci, temp, &xhci->ir_set->irq_pending); - /* Flush posted writes */ - xhci_readl(xhci, &xhci->ir_set->irq_pending); - - if (xhci->xhc_state & XHCI_STATE_DYING) - xhci_dbg(xhci, "xHCI dying, ignoring interrupt. " - "Shouldn't IRQs be disabled?\n"); - else - /* FIXME this should be a delayed service routine - * that clears the EHB. - */ - xhci_handle_event(xhci); - - /* Clear the event handler busy flag (RW1C); the event ring should be empty. */ - temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); - xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue); - /* Flush posted writes -- FIXME is this necessary? */ - xhci_readl(xhci, &xhci->ir_set->irq_pending); -} - /*-------------------------------------------------------------------------*/ -/* - * xHCI spec says we can get an interrupt, and if the HC has an error condition, - * we might get bad data out of the event ring. Section 4.10.2.7 has a list of - * indicators of an event TRB error, but we check the status *first* to be safe. - */ -irqreturn_t xhci_irq(struct usb_hcd *hcd) -{ - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - u32 temp, temp2; - union xhci_trb *trb; - - spin_lock(&xhci->lock); - trb = xhci->event_ring->dequeue; - /* Check if the xHC generated the interrupt, or the irq is shared */ - temp = xhci_readl(xhci, &xhci->op_regs->status); - temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending); - if (temp == 0xffffffff && temp2 == 0xffffffff) - goto hw_died; - - if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) { - spin_unlock(&xhci->lock); - return IRQ_NONE; - } - xhci_dbg(xhci, "op reg status = %08x\n", temp); - xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2); - xhci_dbg(xhci, "Event ring dequeue ptr:\n"); - xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n", - (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb), - lower_32_bits(trb->link.segment_ptr), - upper_32_bits(trb->link.segment_ptr), - (unsigned int) trb->link.intr_target, - (unsigned int) trb->link.control); - - if (temp & STS_FATAL) { - xhci_warn(xhci, "WARNING: Host System Error\n"); - xhci_halt(xhci); -hw_died: - xhci_to_hcd(xhci)->state = HC_STATE_HALT; - spin_unlock(&xhci->lock); - return -ESHUTDOWN; - } - - xhci_work(xhci); - spin_unlock(&xhci->lock); - - return IRQ_HANDLED; -} #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING void xhci_event_ring_work(unsigned long arg) @@ -423,21 +395,36 @@ int xhci_run(struct usb_hcd *hcd) { u32 temp; u64 temp_64; + u32 ret; struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); void (*doorbell)(struct xhci_hcd *) = NULL; hcd->uses_new_polling = 1; - hcd->poll_rh = 0; xhci_dbg(xhci, "xhci_run\n"); -#if 0 /* FIXME: MSI not setup yet */ - /* Do this at the very last minute */ + /* unregister the legacy interrupt */ + if (hcd->irq) + free_irq(hcd->irq, hcd); + hcd->irq = -1; + ret = xhci_setup_msix(xhci); - if (!ret) - return ret; + if (ret) + /* fall back to msi*/ + ret = xhci_setup_msi(xhci); + + if (ret) { + /* fall back to legacy interrupt*/ + ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, + hcd->irq_descr, hcd); + if (ret) { + xhci_err(xhci, "request interrupt %d failed\n", + pdev->irq); + return ret; + } + hcd->irq = pdev->irq; + } - return -ENOSYS; -#endif #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING init_timer(&xhci->event_ring_timer); xhci->event_ring_timer.data = (unsigned long) xhci; @@ -495,7 +482,6 @@ int xhci_run(struct usb_hcd *hcd) return -ENODEV; } - xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp); if (doorbell) (*doorbell)(xhci); if (xhci->quirks & XHCI_NEC_HOST) @@ -522,11 +508,9 @@ void xhci_stop(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); xhci_reset(xhci); + xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); -#if 0 /* No MSI yet */ - xhci_cleanup_msix(xhci); -#endif #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING /* Tell the event ring poll function not to reschedule */ xhci->zombie = 1; @@ -560,11 +544,8 @@ void xhci_shutdown(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); - spin_unlock_irq(&xhci->lock); - -#if 0 xhci_cleanup_msix(xhci); -#endif + spin_unlock_irq(&xhci->lock); xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n", xhci_readl(xhci, &xhci->op_regs->status)); @@ -720,7 +701,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) unsigned long flags; int ret = 0; unsigned int slot_id, ep_index; - + struct urb_priv *urb_priv; + int size, i; if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0) return -EINVAL; @@ -734,12 +716,36 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) ret = -EINVAL; goto exit; } - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { if (!in_interrupt()) xhci_dbg(xhci, "urb submitted during PCI suspend\n"); ret = -ESHUTDOWN; goto exit; } + + if (usb_endpoint_xfer_isoc(&urb->ep->desc)) + size = urb->number_of_packets; + else + size = 1; + + urb_priv = kzalloc(sizeof(struct urb_priv) + + size * sizeof(struct xhci_td *), mem_flags); + if (!urb_priv) + return -ENOMEM; + + for (i = 0; i < size; i++) { + urb_priv->td[i] = kzalloc(sizeof(struct xhci_td), mem_flags); + if (!urb_priv->td[i]) { + urb_priv->length = i; + xhci_urb_free_priv(xhci, urb_priv); + return -ENOMEM; + } + } + + urb_priv->length = size; + urb_priv->td_cnt = 0; + urb->hcpriv = urb_priv; + if (usb_endpoint_xfer_control(&urb->ep->desc)) { /* Check to see if the max packet size for the default control * endpoint changed during FS device enumeration @@ -788,11 +794,18 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) slot_id, ep_index); spin_unlock_irqrestore(&xhci->lock, flags); } else { - ret = -EINVAL; + spin_lock_irqsave(&xhci->lock, flags); + if (xhci->xhc_state & XHCI_STATE_DYING) + goto dying; + ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb, + slot_id, ep_index); + spin_unlock_irqrestore(&xhci->lock, flags); } exit: return ret; dying: + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for " "non-responsive xHCI host.\n", urb->ep->desc.bEndpointAddress, urb); @@ -800,6 +813,47 @@ dying: return -ESHUTDOWN; } +/* Get the right ring for the given URB. + * If the endpoint supports streams, boundary check the URB's stream ID. + * If the endpoint doesn't support streams, return the singular endpoint ring. + */ +static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, + struct urb *urb) +{ + unsigned int slot_id; + unsigned int ep_index; + unsigned int stream_id; + struct xhci_virt_ep *ep; + + slot_id = urb->dev->slot_id; + ep_index = xhci_get_endpoint_index(&urb->ep->desc); + stream_id = urb->stream_id; + ep = &xhci->devs[slot_id]->eps[ep_index]; + /* Common case: no streams */ + if (!(ep->ep_state & EP_HAS_STREAMS)) + return ep->ring; + + if (stream_id == 0) { + xhci_warn(xhci, + "WARN: Slot ID %u, ep index %u has streams, " + "but URB has no stream ID.\n", + slot_id, ep_index); + return NULL; + } + + if (stream_id < ep->stream_info->num_streams) + return ep->stream_info->stream_rings[stream_id]; + + xhci_warn(xhci, + "WARN: Slot ID %u, ep index %u has " + "stream IDs 1 to %u allocated, " + "but stream ID %u is requested.\n", + slot_id, ep_index, + ep->stream_info->num_streams - 1, + stream_id); + return NULL; +} + /* * Remove the URB's TD from the endpoint ring. This may cause the HC to stop * USB transfers, potentially stopping in the middle of a TRB buffer. The HC @@ -834,9 +888,10 @@ dying: int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { unsigned long flags; - int ret; + int ret, i; u32 temp; struct xhci_hcd *xhci; + struct urb_priv *urb_priv; struct xhci_td *td; unsigned int ep_index; struct xhci_ring *ep_ring; @@ -851,12 +906,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) temp = xhci_readl(xhci, &xhci->op_regs->status); if (temp == 0xffffffff) { xhci_dbg(xhci, "HW died, freeing TD.\n"); - td = (struct xhci_td *) urb->hcpriv; + urb_priv = urb->hcpriv; usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&xhci->lock, flags); usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN); - kfree(td); + xhci_urb_free_priv(xhci, urb_priv); return ret; } if (xhci->xhc_state & XHCI_STATE_DYING) { @@ -884,9 +939,14 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) xhci_dbg(xhci, "Endpoint ring:\n"); xhci_debug_ring(xhci, ep_ring); - td = (struct xhci_td *) urb->hcpriv; - list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list); + urb_priv = urb->hcpriv; + + for (i = urb_priv->td_cnt; i < urb_priv->length; i++) { + td = urb_priv->td[i]; + list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list); + } + /* Queue a stop endpoint command, but only if this is * the first cancellation to be handled. */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 6c7e343..34a60d9 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -720,6 +720,14 @@ struct xhci_virt_ep { struct timer_list stop_cmd_timer; int stop_cmds_pending; struct xhci_hcd *xhci; + /* + * Sometimes the xHC can not process isochronous endpoint ring quickly + * enough, and it will miss some isoc tds on the ring and generate + * a Missed Service Error Event. + * Set skip flag when receive a Missed Service Error Event and + * process the missed tds on the endpoint ring. + */ + bool skip; }; struct xhci_virt_device { @@ -911,6 +919,9 @@ struct xhci_event_cmd { /* Control transfer TRB specific fields */ #define TRB_DIR_IN (1<<16) +/* Isochronous TRB specific fields */ +#define TRB_SIA (1<<31) + struct xhci_generic_trb { u32 field[4]; }; @@ -1082,6 +1093,12 @@ struct xhci_scratchpad { dma_addr_t *sp_dma_buffers; }; +struct urb_priv { + int length; + int td_cnt; + struct xhci_td *td[0]; +}; + /* * Each segment table entry is 4*32bits long. 1K seems like an ok size: * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table, @@ -1130,7 +1147,7 @@ struct xhci_hcd { int page_size; /* Valid values are 12 to 20, inclusive */ int page_shift; - /* only one MSI vector for now, but might need more later */ + /* msi-x vectors */ int msix_count; struct msix_entry *msix_entries; /* data structures */ @@ -1327,11 +1344,6 @@ void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci, struct xhci_ring *xhci_dma_to_transfer_ring( struct xhci_virt_ep *ep, u64 address); -struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, - struct urb *urb); -struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci, - unsigned int slot_id, unsigned int ep_index, - unsigned int stream_id); struct xhci_ring *xhci_stream_id_to_ring( struct xhci_virt_device *dev, unsigned int ep_index, @@ -1339,6 +1351,7 @@ struct xhci_ring *xhci_stream_id_to_ring( struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, bool allocate_in_ctx, bool allocate_completion, gfp_t mem_flags); +void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv); void xhci_free_command(struct xhci_hcd *xhci, struct xhci_command *command); @@ -1358,6 +1371,7 @@ void xhci_stop(struct usb_hcd *hcd); void xhci_shutdown(struct usb_hcd *hcd); int xhci_get_frame(struct usb_hcd *hcd); irqreturn_t xhci_irq(struct usb_hcd *hcd); +irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd); int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev); void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev); int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, @@ -1386,8 +1400,6 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg, int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code); void xhci_ring_cmd_db(struct xhci_hcd *xhci); void *xhci_setup_one_noop(struct xhci_hcd *xhci); -void xhci_handle_event(struct xhci_hcd *xhci); -void xhci_set_hc_event_deq(struct xhci_hcd *xhci); int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id); int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id); @@ -1401,6 +1413,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); +int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, + struct urb *urb, int slot_id, unsigned int ep_index); int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed); int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 82e1663..aecf380 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -650,7 +650,7 @@ static int ftdi_elan_open(struct inode *inode, struct file *file) static int ftdi_elan_release(struct inode *inode, struct file *file) { - struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data; + struct usb_ftdi *ftdi = file->private_data; if (ftdi == NULL) return -ENODEV; up(&ftdi->sw_lock); /* decrement the count on our device */ @@ -673,7 +673,7 @@ static ssize_t ftdi_elan_read(struct file *file, char __user *buffer, int bytes_read = 0; int retry_on_empty = 10; int retry_on_timeout = 5; - struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data; + struct usb_ftdi *ftdi = file->private_data; if (ftdi->disconnected > 0) { return -ENODEV; } diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 7dc9d3c..2de49c8 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/sched.h> -#include <linux/smp_lock.h> +#include <linux/mutex.h> #include <linux/poll.h> #include <linux/usb/iowarrior.h> @@ -61,6 +61,7 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); /* Module parameters */ +static DEFINE_MUTEX(iowarrior_mutex); static int debug = 0; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "debug=1 enables debugging messages"); @@ -282,7 +283,7 @@ static ssize_t iowarrior_read(struct file *file, char __user *buffer, int read_idx; int offset; - dev = (struct iowarrior *)file->private_data; + dev = file->private_data; /* verify that the device wasn't unplugged */ if (dev == NULL || !dev->present) @@ -348,7 +349,7 @@ static ssize_t iowarrior_write(struct file *file, char *buf = NULL; /* for IOW24 and IOW56 we need a buffer */ struct urb *int_out_urb = NULL; - dev = (struct iowarrior *)file->private_data; + dev = file->private_data; mutex_lock(&dev->mutex); /* verify that the device wasn't unplugged */ @@ -483,7 +484,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, int retval; int io_res; /* checks for bytes read/written and copy_to/from_user results */ - dev = (struct iowarrior *)file->private_data; + dev = file->private_data; if (dev == NULL) { return -ENODEV; } @@ -493,7 +494,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, return -ENOMEM; /* lock this object */ - lock_kernel(); + mutex_lock(&iowarrior_mutex); mutex_lock(&dev->mutex); /* verify that the device wasn't unplugged */ @@ -585,7 +586,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, error_out: /* unlock the device */ mutex_unlock(&dev->mutex); - unlock_kernel(); + mutex_unlock(&iowarrior_mutex); kfree(buffer); return retval; } @@ -602,12 +603,12 @@ static int iowarrior_open(struct inode *inode, struct file *file) dbg("%s", __func__); - lock_kernel(); + mutex_lock(&iowarrior_mutex); subminor = iminor(inode); interface = usb_find_interface(&iowarrior_driver, subminor); if (!interface) { - unlock_kernel(); + mutex_unlock(&iowarrior_mutex); err("%s - error, can't find device for minor %d", __func__, subminor); return -ENODEV; @@ -617,7 +618,7 @@ static int iowarrior_open(struct inode *inode, struct file *file) dev = usb_get_intfdata(interface); if (!dev) { mutex_unlock(&iowarrior_open_disc_lock); - unlock_kernel(); + mutex_unlock(&iowarrior_mutex); return -ENODEV; } @@ -644,7 +645,7 @@ static int iowarrior_open(struct inode *inode, struct file *file) out: mutex_unlock(&dev->mutex); - unlock_kernel(); + mutex_unlock(&iowarrior_mutex); return retval; } @@ -656,7 +657,7 @@ static int iowarrior_release(struct inode *inode, struct file *file) struct iowarrior *dev; int retval = 0; - dev = (struct iowarrior *)file->private_data; + dev = file->private_data; if (dev == NULL) { return -ENODEV; } diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 8547bf9..6482c6e 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -448,7 +448,7 @@ static int tower_release (struct inode *inode, struct file *file) dbg(2, "%s: enter", __func__); - dev = (struct lego_usb_tower *)file->private_data; + dev = file->private_data; if (dev == NULL) { dbg(1, "%s: object is NULL", __func__); @@ -597,7 +597,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, dbg(2, "%s: enter, count = %Zd", __func__, count); - dev = (struct lego_usb_tower *)file->private_data; + dev = file->private_data; /* lock this object */ if (mutex_lock_interruptible(&dev->lock)) { @@ -686,7 +686,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t dbg(2, "%s: enter, count = %Zd", __func__, count); - dev = (struct lego_usb_tower *)file->private_data; + dev = file->private_data; /* lock this object */ if (mutex_lock_interruptible(&dev->lock)) { diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index a85771b..cc13ae6 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -32,7 +32,7 @@ #include <linux/kernel.h> #include <linux/signal.h> #include <linux/sched.h> -#include <linux/smp_lock.h> +#include <linux/mutex.h> #include <linux/errno.h> #include <linux/random.h> #include <linux/poll.h> @@ -72,6 +72,7 @@ struct rio_usb_data { struct mutex lock; /* general race avoidance */ }; +static DEFINE_MUTEX(rio500_mutex); static struct rio_usb_data rio_instance; static int open_rio(struct inode *inode, struct file *file) @@ -79,12 +80,12 @@ static int open_rio(struct inode *inode, struct file *file) struct rio_usb_data *rio = &rio_instance; /* against disconnect() */ - lock_kernel(); + mutex_lock(&rio500_mutex); mutex_lock(&(rio->lock)); if (rio->isopen || !rio->present) { mutex_unlock(&(rio->lock)); - unlock_kernel(); + mutex_unlock(&rio500_mutex); return -EBUSY; } rio->isopen = 1; @@ -94,7 +95,7 @@ static int open_rio(struct inode *inode, struct file *file) mutex_unlock(&(rio->lock)); dev_info(&rio->rio_dev->dev, "Rio opened.\n"); - unlock_kernel(); + mutex_unlock(&rio500_mutex); return 0; } @@ -491,7 +492,7 @@ static void disconnect_rio(struct usb_interface *intf) struct rio_usb_data *rio = usb_get_intfdata (intf); usb_set_intfdata (intf, NULL); - lock_kernel(); + mutex_lock(&rio500_mutex); if (rio) { usb_deregister_dev(intf, &usb_rio_class); @@ -501,7 +502,7 @@ static void disconnect_rio(struct usb_interface *intf) /* better let it finish - the release will do whats needed */ rio->rio_dev = NULL; mutex_unlock(&(rio->lock)); - unlock_kernel(); + mutex_unlock(&rio500_mutex); return; } kfree(rio->ibuf); @@ -512,7 +513,7 @@ static void disconnect_rio(struct usb_interface *intf) rio->present = 0; mutex_unlock(&(rio->lock)); } - unlock_kernel(); + mutex_unlock(&rio500_mutex); } static const struct usb_device_id rio_table[] = { diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index d25814c..70d00e9 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2487,7 +2487,7 @@ sisusb_release(struct inode *inode, struct file *file) { struct sisusb_usb_data *sisusb; - if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) + if (!(sisusb = file->private_data)) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2519,7 +2519,7 @@ sisusb_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) u16 buf16; u32 buf32, address; - if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) + if (!(sisusb = file->private_data)) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2661,7 +2661,7 @@ sisusb_write(struct file *file, const char __user *buffer, size_t count, u16 buf16; u32 buf32, address; - if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) + if (!(sisusb = file->private_data)) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2804,7 +2804,7 @@ sisusb_lseek(struct file *file, loff_t offset, int orig) struct sisusb_usb_data *sisusb; loff_t ret; - if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) + if (!(sisusb = file->private_data)) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2969,7 +2969,7 @@ sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) long retval = 0; u32 __user *argp = (u32 __user *)arg; - if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) + if (!(sisusb = file->private_data)) return -ENODEV; mutex_lock(&sisusb->lock); diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 7828c76..d00dde1 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -16,7 +16,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/mutex.h> #include <asm/uaccess.h> @@ -30,6 +29,7 @@ #define IOCTL_GET_DRV_VERSION 2 +static DEFINE_MUTEX(lcd_mutex); static const struct usb_device_id id_table[] = { { .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, }, { }, @@ -74,12 +74,12 @@ static int lcd_open(struct inode *inode, struct file *file) struct usb_interface *interface; int subminor, r; - lock_kernel(); + mutex_lock(&lcd_mutex); subminor = iminor(inode); interface = usb_find_interface(&lcd_driver, subminor); if (!interface) { - unlock_kernel(); + mutex_unlock(&lcd_mutex); err ("USBLCD: %s - error, can't find device for minor %d", __func__, subminor); return -ENODEV; @@ -89,7 +89,7 @@ static int lcd_open(struct inode *inode, struct file *file) dev = usb_get_intfdata(interface); if (!dev) { mutex_unlock(&open_disc_mutex); - unlock_kernel(); + mutex_unlock(&lcd_mutex); return -ENODEV; } @@ -101,13 +101,13 @@ static int lcd_open(struct inode *inode, struct file *file) r = usb_autopm_get_interface(interface); if (r < 0) { kref_put(&dev->kref, lcd_delete); - unlock_kernel(); + mutex_unlock(&lcd_mutex); return r; } /* save our object in the file's private structure */ file->private_data = dev; - unlock_kernel(); + mutex_unlock(&lcd_mutex); return 0; } @@ -116,7 +116,7 @@ static int lcd_release(struct inode *inode, struct file *file) { struct usb_lcd *dev; - dev = (struct usb_lcd *)file->private_data; + dev = file->private_data; if (dev == NULL) return -ENODEV; @@ -132,7 +132,7 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, l int retval = 0; int bytes_read; - dev = (struct usb_lcd *)file->private_data; + dev = file->private_data; /* do a blocking bulk read to get data from the device */ retval = usb_bulk_msg(dev->udev, @@ -158,20 +158,20 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) u16 bcdDevice; char buf[30]; - dev = (struct usb_lcd *)file->private_data; + dev = file->private_data; if (dev == NULL) return -ENODEV; switch (cmd) { case IOCTL_GET_HARD_VERSION: - lock_kernel(); + mutex_lock(&lcd_mutex); bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice); sprintf(buf,"%1d%1d.%1d%1d", (bcdDevice & 0xF000)>>12, (bcdDevice & 0xF00)>>8, (bcdDevice & 0xF0)>>4, (bcdDevice & 0xF)); - unlock_kernel(); + mutex_unlock(&lcd_mutex); if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0) return -EFAULT; break; @@ -217,7 +217,7 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz struct urb *urb = NULL; char *buf = NULL; - dev = (struct usb_lcd *)file->private_data; + dev = file->private_data; /* verify that we actually have some data to write */ if (count == 0) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 16dffe9..eef370e 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -136,7 +136,7 @@ try_iso: iso_out = e; } } - if ((in && out) || (iso_in && iso_out)) + if ((in && out) || iso_in || iso_out) goto found; } return -EINVAL; @@ -162,6 +162,9 @@ found: dev->in_iso_pipe = usb_rcvisocpipe (udev, iso_in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + } + + if (iso_out) { dev->iso_out = &iso_out->desc; dev->out_iso_pipe = usb_sndisocpipe (udev, iso_out->desc.bEndpointAddress @@ -1378,7 +1381,6 @@ static void iso_callback (struct urb *urb) break; } } - simple_free_urb (urb); ctx->pending--; if (ctx->pending == 0) { @@ -1495,6 +1497,7 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param, } simple_free_urb (urbs [i]); + urbs[i] = NULL; context.pending--; context.submit_error = 1; break; @@ -1504,6 +1507,10 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param, wait_for_completion (&context.done); + for (i = 0; i < param->sglen; i++) { + if (urbs[i]) + simple_free_urb(urbs[i]); + } /* * Isochronous transfers are expected to fail sometimes. As an * arbitrary limit, we will report an error if any submissions @@ -1548,6 +1555,7 @@ fail: * off just killing the userspace task and waiting for it to exit. */ +/* No BKL needed */ static int usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf) { @@ -2170,7 +2178,7 @@ static struct usb_driver usbtest_driver = { .name = "usbtest", .id_table = id_table, .probe = usbtest_probe, - .ioctl = usbtest_ioctl, + .unlocked_ioctl = usbtest_ioctl, .disconnect = usbtest_disconnect, .suspend = usbtest_suspend, .resume = usbtest_resume, diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 61c76b1..44cb37b 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -646,17 +646,14 @@ static int mon_bin_open(struct inode *inode, struct file *file) size_t size; int rc; - lock_kernel(); mutex_lock(&mon_lock); if ((mbus = mon_bus_lookup(iminor(inode))) == NULL) { mutex_unlock(&mon_lock); - unlock_kernel(); return -ENODEV; } if (mbus != &mon_bus0 && mbus->u_bus == NULL) { printk(KERN_ERR TAG ": consistency error on open\n"); mutex_unlock(&mon_lock); - unlock_kernel(); return -ENODEV; } @@ -689,7 +686,6 @@ static int mon_bin_open(struct inode *inode, struct file *file) file->private_data = rp; mutex_unlock(&mon_lock); - unlock_kernel(); return 0; err_allocbuff: @@ -698,7 +694,6 @@ err_allocvec: kfree(rp); err_alloc: mutex_unlock(&mon_lock); - unlock_kernel(); return rc; } @@ -954,7 +949,7 @@ static int mon_bin_queued(struct mon_reader_bin *rp) /* */ -static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +static long mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct mon_reader_bin *rp = file->private_data; // struct mon_bus* mbus = rp->r.m_bus; @@ -1009,7 +1004,7 @@ static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg) mutex_lock(&rp->fetch_lock); spin_lock_irqsave(&rp->b_lock, flags); - mon_free_buff(rp->b_vec, size/CHUNK_SIZE); + mon_free_buff(rp->b_vec, rp->b_size/CHUNK_SIZE); kfree(rp->b_vec); rp->b_vec = vec; rp->b_size = size; @@ -1094,19 +1089,6 @@ static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return ret; } -static long mon_bin_unlocked_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - int ret; - - lock_kernel(); - ret = mon_bin_ioctl(file, cmd, arg); - unlock_kernel(); - - return ret; -} - - #ifdef CONFIG_COMPAT static long mon_bin_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) @@ -1250,7 +1232,7 @@ static const struct file_operations mon_fops_binary = { .read = mon_bin_read, /* .write = mon_text_write, */ .poll = mon_bin_poll, - .unlocked_ioctl = mon_bin_unlocked_ioctl, + .unlocked_ioctl = mon_bin_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = mon_bin_compat_ioctl, #endif diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 3b795c5..540c766 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -704,7 +704,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, #ifdef CONFIG_USB_MUSB_HDRC_HCD if (int_usb & MUSB_INTR_CONNECT) { struct usb_hcd *hcd = musb_to_hcd(musb); - void __iomem *mbase = musb->mregs; handled = IRQ_HANDLED; musb->is_active = 1; @@ -717,9 +716,9 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, if (is_peripheral_active(musb)) { /* REVISIT HNP; just force disconnect */ } - musb_writew(mbase, MUSB_INTRTXE, musb->epmask); - musb_writew(mbase, MUSB_INTRRXE, musb->epmask & 0xfffe); - musb_writeb(mbase, MUSB_INTRUSBE, 0xf7); + musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask); + musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe); + musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7); #endif musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED |USB_PORT_STAT_HIGH_SPEED diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index bba76af..c79a5e3 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -92,29 +92,29 @@ static const struct musb_register_map musb_regmap[] = { { "LS_EOF1", 0x7E, 8 }, { "SOFT_RST", 0x7F, 8 }, { "DMA_CNTLch0", 0x204, 16 }, - { "DMA_ADDRch0", 0x208, 16 }, - { "DMA_COUNTch0", 0x20C, 16 }, + { "DMA_ADDRch0", 0x208, 32 }, + { "DMA_COUNTch0", 0x20C, 32 }, { "DMA_CNTLch1", 0x214, 16 }, - { "DMA_ADDRch1", 0x218, 16 }, - { "DMA_COUNTch1", 0x21C, 16 }, + { "DMA_ADDRch1", 0x218, 32 }, + { "DMA_COUNTch1", 0x21C, 32 }, { "DMA_CNTLch2", 0x224, 16 }, - { "DMA_ADDRch2", 0x228, 16 }, - { "DMA_COUNTch2", 0x22C, 16 }, + { "DMA_ADDRch2", 0x228, 32 }, + { "DMA_COUNTch2", 0x22C, 32 }, { "DMA_CNTLch3", 0x234, 16 }, - { "DMA_ADDRch3", 0x238, 16 }, - { "DMA_COUNTch3", 0x23C, 16 }, + { "DMA_ADDRch3", 0x238, 32 }, + { "DMA_COUNTch3", 0x23C, 32 }, { "DMA_CNTLch4", 0x244, 16 }, - { "DMA_ADDRch4", 0x248, 16 }, - { "DMA_COUNTch4", 0x24C, 16 }, + { "DMA_ADDRch4", 0x248, 32 }, + { "DMA_COUNTch4", 0x24C, 32 }, { "DMA_CNTLch5", 0x254, 16 }, - { "DMA_ADDRch5", 0x258, 16 }, - { "DMA_COUNTch5", 0x25C, 16 }, + { "DMA_ADDRch5", 0x258, 32 }, + { "DMA_COUNTch5", 0x25C, 32 }, { "DMA_CNTLch6", 0x264, 16 }, - { "DMA_ADDRch6", 0x268, 16 }, - { "DMA_COUNTch6", 0x26C, 16 }, + { "DMA_ADDRch6", 0x268, 32 }, + { "DMA_COUNTch6", 0x26C, 32 }, { "DMA_CNTLch7", 0x274, 16 }, - { "DMA_ADDRch7", 0x278, 16 }, - { "DMA_COUNTch7", 0x27C, 16 }, + { "DMA_ADDRch7", 0x278, 32 }, + { "DMA_COUNTch7", 0x27C, 32 }, { } /* Terminating Entry */ }; diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 21b9788..59bef8f 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -402,6 +402,9 @@ __acquires(musb->lock) musb->g.a_alt_hnp_support = 1; break; #endif + case USB_DEVICE_DEBUG_MODE: + handled = 0; + break; stall: default: handled = -EINVAL; diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 92e85e0..43233c3 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -244,7 +244,7 @@ int musb_hub_control( spin_lock_irqsave(&musb->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) { spin_unlock_irqrestore(&musb->lock, flags); return -ESHUTDOWN; } diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index dc66e43..6dc107f 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -173,10 +173,7 @@ static int dma_channel_program(struct dma_channel *channel, musb_channel->max_packet_sz = packet_sz; channel->status = MUSB_DMA_STATUS_BUSY; - if ((mode == 1) && (len >= packet_sz)) - configure_channel(channel, packet_sz, 1, dma_addr, len); - else - configure_channel(channel, packet_sz, 0, dma_addr, len); + configure_channel(channel, packet_sz, mode, dma_addr, len); return true; } diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index e06d65e..2111a24 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -32,8 +32,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/mux.h> - #include "musb_core.h" #include "omap2430.h" @@ -194,10 +192,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data) u32 l; struct omap_musb_board_data *data = board_data; -#if defined(CONFIG_ARCH_OMAP2430) - omap_cfg_reg(AE5_2430_USB0HS_STP); -#endif - /* We require some kind of external transceiver, hooked * up through ULPI. TWL4030-family PMICs include one, * which needs a driver, drivers aren't always needed. diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 3d2d3e5..3b12895 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -49,8 +49,6 @@ config USB_ULPI Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. - The only chip currently supported is NXP's ISP1504 - config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" depends on TWL4030_CORE && REGULATOR_TWL4030 diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c index d331b22..ccc8195 100644 --- a/drivers/usb/otg/ulpi.c +++ b/drivers/usb/otg/ulpi.c @@ -31,30 +31,110 @@ #define ULPI_ID(vendor, product) (((vendor) << 16) | (product)) -#define TR_FLAG(flags, a, b) (((flags) & a) ? b : 0) - /* ULPI hardcoded IDs, used for probing */ static unsigned int ulpi_ids[] = { ULPI_ID(0x04cc, 0x1504), /* NXP ISP1504 */ + ULPI_ID(0x0424, 0x0006), /* SMSC USB3319 */ }; -static int ulpi_set_flags(struct otg_transceiver *otg) +static int ulpi_set_otg_flags(struct otg_transceiver *otg) { - unsigned int flags = 0; + unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN | + ULPI_OTG_CTRL_DM_PULLDOWN; - if (otg->flags & USB_OTG_PULLUP_ID) + if (otg->flags & ULPI_OTG_ID_PULLUP) flags |= ULPI_OTG_CTRL_ID_PULLUP; - if (otg->flags & USB_OTG_PULLDOWN_DM) - flags |= ULPI_OTG_CTRL_DM_PULLDOWN; + /* + * ULPI Specification rev.1.1 default + * for Dp/DmPulldown is enabled. + */ + if (otg->flags & ULPI_OTG_DP_PULLDOWN_DIS) + flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN; - if (otg->flags & USB_OTG_PULLDOWN_DP) - flags |= ULPI_OTG_CTRL_DP_PULLDOWN; + if (otg->flags & ULPI_OTG_DM_PULLDOWN_DIS) + flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN; - if (otg->flags & USB_OTG_EXT_VBUS_INDICATOR) + if (otg->flags & ULPI_OTG_EXTVBUSIND) flags |= ULPI_OTG_CTRL_EXTVBUSIND; - return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL)); + return otg_io_write(otg, flags, ULPI_OTG_CTRL); +} + +static int ulpi_set_fc_flags(struct otg_transceiver *otg) +{ + unsigned int flags = 0; + + /* + * ULPI Specification rev.1.1 default + * for XcvrSelect is Full Speed. + */ + if (otg->flags & ULPI_FC_HS) + flags |= ULPI_FUNC_CTRL_HIGH_SPEED; + else if (otg->flags & ULPI_FC_LS) + flags |= ULPI_FUNC_CTRL_LOW_SPEED; + else if (otg->flags & ULPI_FC_FS4LS) + flags |= ULPI_FUNC_CTRL_FS4LS; + else + flags |= ULPI_FUNC_CTRL_FULL_SPEED; + + if (otg->flags & ULPI_FC_TERMSEL) + flags |= ULPI_FUNC_CTRL_TERMSELECT; + + /* + * ULPI Specification rev.1.1 default + * for OpMode is Normal Operation. + */ + if (otg->flags & ULPI_FC_OP_NODRV) + flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; + else if (otg->flags & ULPI_FC_OP_DIS_NRZI) + flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI; + else if (otg->flags & ULPI_FC_OP_NSYNC_NEOP) + flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP; + else + flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + + /* + * ULPI Specification rev.1.1 default + * for SuspendM is Powered. + */ + flags |= ULPI_FUNC_CTRL_SUSPENDM; + + return otg_io_write(otg, flags, ULPI_FUNC_CTRL); +} + +static int ulpi_set_ic_flags(struct otg_transceiver *otg) +{ + unsigned int flags = 0; + + if (otg->flags & ULPI_IC_AUTORESUME) + flags |= ULPI_IFC_CTRL_AUTORESUME; + + if (otg->flags & ULPI_IC_EXTVBUS_INDINV) + flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS; + + if (otg->flags & ULPI_IC_IND_PASSTHRU) + flags |= ULPI_IFC_CTRL_PASSTHRU; + + if (otg->flags & ULPI_IC_PROTECT_DIS) + flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE; + + return otg_io_write(otg, flags, ULPI_IFC_CTRL); +} + +static int ulpi_set_flags(struct otg_transceiver *otg) +{ + int ret; + + ret = ulpi_set_otg_flags(otg); + if (ret) + return ret; + + ret = ulpi_set_ic_flags(otg); + if (ret) + return ret; + + return ulpi_set_fc_flags(otg); } static int ulpi_init(struct otg_transceiver *otg) @@ -81,6 +161,31 @@ static int ulpi_init(struct otg_transceiver *otg) return -ENODEV; } +static int ulpi_set_host(struct otg_transceiver *otg, struct usb_bus *host) +{ + unsigned int flags = otg_io_read(otg, ULPI_IFC_CTRL); + + if (!host) { + otg->host = NULL; + return 0; + } + + otg->host = host; + + flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE | + ULPI_IFC_CTRL_3_PIN_SERIAL_MODE | + ULPI_IFC_CTRL_CARKITMODE); + + if (otg->flags & ULPI_IC_6PIN_SERIAL) + flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE; + else if (otg->flags & ULPI_IC_3PIN_SERIAL) + flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE; + else if (otg->flags & ULPI_IC_CARKIT) + flags |= ULPI_IFC_CTRL_CARKITMODE; + + return otg_io_write(otg, flags, ULPI_IFC_CTRL); +} + static int ulpi_set_vbus(struct otg_transceiver *otg, bool on) { unsigned int flags = otg_io_read(otg, ULPI_OTG_CTRL); @@ -88,14 +193,14 @@ static int ulpi_set_vbus(struct otg_transceiver *otg, bool on) flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT); if (on) { - if (otg->flags & USB_OTG_DRV_VBUS) + if (otg->flags & ULPI_OTG_DRVVBUS) flags |= ULPI_OTG_CTRL_DRVVBUS; - if (otg->flags & USB_OTG_DRV_VBUS_EXT) + if (otg->flags & ULPI_OTG_DRVVBUS_EXT) flags |= ULPI_OTG_CTRL_DRVVBUS_EXT; } - return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL)); + return otg_io_write(otg, flags, ULPI_OTG_CTRL); } struct otg_transceiver * @@ -112,6 +217,7 @@ otg_ulpi_create(struct otg_io_access_ops *ops, otg->flags = flags; otg->io_ops = ops; otg->init = ulpi_init; + otg->set_host = ulpi_set_host; otg->set_vbus = ulpi_set_vbus; return otg; diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index bd8aab0..916b2b6 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -642,6 +642,15 @@ config USB_SERIAL_ZIO To compile this driver as a module, choose M here: the module will be called zio. +config USB_SERIAL_SSU100 + tristate "USB Quatech SSU-100 Single Port Serial Driver" + help + Say Y here if you want to use the Quatech SSU-100 single + port usb to serial adapter. + + To compile this driver as a module, choose M here: the + module will be called ssu100. + config USB_SERIAL_DEBUG tristate "USB Debugging Device" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index e54c728..40ebe17 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o +obj-$(CONFIG_USB_SERIAL_SSU100) += ssu100.o obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 8b8c797..2bef441 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -126,6 +126,10 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ + { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */ + { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */ + { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */ + { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */ { } /* Terminating Entry */ }; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index fd35f73..b92070c 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -609,8 +609,10 @@ static void digi_wakeup_write_lock(struct work_struct *work) static void digi_wakeup_write(struct usb_serial_port *port) { struct tty_struct *tty = tty_port_tty_get(&port->port); - tty_wakeup(tty); - tty_kref_put(tty); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } } @@ -1682,7 +1684,7 @@ static int digi_read_inb_callback(struct urb *urb) priv->dp_throttle_restart = 1; /* receive data */ - if (opcode == DIGI_CMD_RECEIVE_DATA) { + if (tty && opcode == DIGI_CMD_RECEIVE_DATA) { /* get flag from port_status */ flag = 0; @@ -1763,10 +1765,12 @@ static int digi_read_oob_callback(struct urb *urb) return -1; tty = tty_port_tty_get(&port->port); + rts = 0; - rts = tty->termios->c_cflag & CRTSCTS; + if (tty) + rts = tty->termios->c_cflag & CRTSCTS; - if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) { + if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) { spin_lock(&priv->dp_port_lock); /* convert from digi flags to termiox flags */ if (val & DIGI_READ_INPUT_SIGNALS_CTS) { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index e298dc4..eb12d9b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -157,6 +157,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) }, @@ -746,6 +749,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index d01946d..6e612c5 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -40,6 +40,11 @@ #define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ +/* US Interface Navigator (http://www.usinterface.com/) */ +#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */ +#define FTDI_USINT_WKEY_PID 0xb811 /* Navigator WKEY and FSK lines */ +#define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */ + /* OOCDlink by Joern Kaipf <joernk@web.de> * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ @@ -1032,3 +1037,8 @@ #define XVERVE_SIGNALYZER_SH2_PID 0xBCA2 #define XVERVE_SIGNALYZER_SH4_PID 0xBCA4 +/* + * Segway Robotic Mobility Platform USB interface (using VID 0x0403) + * Submitted by John G. Rogers + */ +#define SEGWAY_RMP200_PID 0xe729 diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index a817ced..ca92f67 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -208,18 +208,23 @@ retry: urb->transfer_buffer_length = count; usb_serial_debug_data(debug, &port->dev, __func__, count, urb->transfer_buffer); + spin_lock_irqsave(&port->lock, flags); + port->tx_bytes += count; + spin_unlock_irqrestore(&port->lock, flags); + + clear_bit(i, &port->write_urbs_free); result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { dev_err(&port->dev, "%s - error submitting urb: %d\n", __func__, result); + set_bit(i, &port->write_urbs_free); + spin_lock_irqsave(&port->lock, flags); + port->tx_bytes -= count; + spin_unlock_irqrestore(&port->lock, flags); + clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); return result; } - clear_bit(i, &port->write_urbs_free); - - spin_lock_irqsave(&port->lock, flags); - port->tx_bytes += count; - spin_unlock_irqrestore(&port->lock, flags); /* Try sending off another urb, unless in irq context (in which case * there will be no free urb). */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 0fca265..dc47f98 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1298,7 +1298,7 @@ static int download_fw(struct edgeport_serial *serial) kfree(header); kfree(rom_desc); kfree(ti_manuf_desc); - return status; + return -EINVAL; } /* verify the write -- must do this in order for @@ -1321,7 +1321,7 @@ static int download_fw(struct edgeport_serial *serial) kfree(header); kfree(rom_desc); kfree(ti_manuf_desc); - return status; + return -EINVAL; } kfree(vheader); diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 28913fa..4735931 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -534,7 +534,6 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */ { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ - { USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC smartphone modems */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 74551cb2..efc7211 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -1,6 +1,8 @@ /* * Infinity Unlimited USB Phoenix driver * + * Copyright (C) 2010 James Courtier-Dutton (James@superbug.co.uk) + * Copyright (C) 2007 Alain Degreffe (eczema@ecze.com) * * Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás) @@ -40,7 +42,7 @@ static int debug; /* * Version Information */ -#define DRIVER_VERSION "v0.11" +#define DRIVER_VERSION "v0.12" #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" static const struct usb_device_id id_table[] = { @@ -81,6 +83,9 @@ struct iuu_private { u8 *dbgbuf; /* debug buffer */ u8 len; int vcc; /* vcc (either 3 or 5 V) */ + u32 baud; + u32 boost; + u32 clk; }; @@ -157,13 +162,14 @@ static int iuu_tiocmset(struct tty_struct *tty, struct file *file, port->number, set, clear); spin_lock_irqsave(&priv->lock, flags); - if (set & TIOCM_RTS) - priv->tiostatus = TIOCM_RTS; - if (!(set & TIOCM_RTS) && priv->tiostatus == TIOCM_RTS) { + if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) { dbg("%s TIOCMSET RESET called !!!", __func__); priv->reset = 1; } + if (set & TIOCM_RTS) + priv->tiostatus = TIOCM_RTS; + spin_unlock_irqrestore(&priv->lock, flags); return 0; } @@ -851,20 +857,24 @@ static int iuu_uart_off(struct usb_serial_port *port) return status; } -static int iuu_uart_baud(struct usb_serial_port *port, u32 baud, +static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base, u32 *actual, u8 parity) { int status; + u32 baud; u8 *dataout; u8 DataCount = 0; u8 T1Frekvens = 0; u8 T1reload = 0; unsigned int T1FrekvensHZ = 0; + dbg("%s - enter baud_base=%d", __func__, baud_base); dataout = kmalloc(sizeof(u8) * 5, GFP_KERNEL); if (!dataout) return -ENOMEM; + /*baud = (((priv->clk / 35) * baud_base) / 100000); */ + baud = baud_base; if (baud < 1200 || baud > 230400) { kfree(dataout); @@ -948,15 +958,20 @@ static void iuu_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { const u32 supported_mask = CMSPAR|PARENB|PARODD; - + struct iuu_private *priv = usb_get_serial_port_data(port); unsigned int cflag = tty->termios->c_cflag; int status; u32 actual; u32 parity; int csize = CS7; - int baud = 9600; /* Fixed for the moment */ + int baud; u32 newval = cflag & supported_mask; + /* Just use the ospeed. ispeed should be the same. */ + baud = tty->termios->c_ospeed; + + dbg("%s - enter c_ospeed or baud=%d", __func__, baud); + /* compute the parity parameter */ parity = 0; if (cflag & CMSPAR) { /* Using mark space */ @@ -976,15 +991,15 @@ static void iuu_set_termios(struct tty_struct *tty, /* set it */ status = iuu_uart_baud(port, - (clockmode == 2) ? 16457 : 9600 * boost / 100, + baud * priv->boost / 100, &actual, parity); /* set the termios value to the real one, so the user now what has * changed. We support few fields so its easies to copy the old hw * settings back over and then adjust them */ - if (old_termios) - tty_termios_copy_hw(tty->termios, old_termios); + if (old_termios) + tty_termios_copy_hw(tty->termios, old_termios); if (status != 0) /* Set failed - return old bits */ return; /* Re-encode speed, parity and csize */ @@ -1018,6 +1033,7 @@ static void iuu_close(struct usb_serial_port *port) static void iuu_init_termios(struct tty_struct *tty) { + dbg("%s - enter", __func__); *(tty->termios) = tty_std_termios; tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600 | TIOCM_CTS | CSTOPB | PARENB; @@ -1033,10 +1049,16 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) struct usb_serial *serial = port->serial; u8 *buf; int result; + int baud; u32 actual; struct iuu_private *priv = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); + baud = tty->termios->c_ospeed; + tty->termios->c_ispeed = baud; + /* Re-encode speed */ + tty_encode_baud_rate(tty, baud, baud); + + dbg("%s - port %d, baud %d", __func__, port->number, baud); usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); @@ -1071,23 +1093,29 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) iuu_uart_on(port); if (boost < 100) boost = 100; + priv->boost = boost; + priv->baud = baud; switch (clockmode) { case 2: /* 3.680 Mhz */ + priv->clk = IUU_CLK_3680000; iuu_clk(port, IUU_CLK_3680000 * boost / 100); result = - iuu_uart_baud(port, 9600 * boost / 100, &actual, + iuu_uart_baud(port, baud * boost / 100, &actual, IUU_PARITY_EVEN); break; case 3: /* 6.00 Mhz */ iuu_clk(port, IUU_CLK_6000000 * boost / 100); + priv->clk = IUU_CLK_6000000; + /* Ratio of 6000000 to 3500000 for baud 9600 */ result = iuu_uart_baud(port, 16457 * boost / 100, &actual, IUU_PARITY_EVEN); break; default: /* 3.579 Mhz */ iuu_clk(port, IUU_CLK_3579000 * boost / 100); + priv->clk = IUU_CLK_3579000; result = - iuu_uart_baud(port, 9600 * boost / 100, &actual, + iuu_uart_baud(port, baud * boost / 100, &actual, IUU_PARITY_EVEN); } diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5cd30e43..9fc6ea2 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -145,7 +145,10 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_E143D 0x143D #define HUAWEI_PRODUCT_E143E 0x143E #define HUAWEI_PRODUCT_E143F 0x143F +#define HUAWEI_PRODUCT_K4505 0x1464 +#define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_E14AC 0x14AC +#define HUAWEI_PRODUCT_ETS1220 0x1803 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -264,9 +267,6 @@ static void option_instat_callback(struct urb *urb); #define BANDRICH_PRODUCT_1011 0x1011 #define BANDRICH_PRODUCT_1012 0x1012 -#define AMOI_VENDOR_ID 0x1614 -#define AMOI_PRODUCT_9508 0x0800 - #define QUALCOMM_VENDOR_ID 0x05C6 #define CMOTECH_VENDOR_ID 0x16d8 @@ -482,8 +482,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) }, - { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */ @@ -1017,6 +1019,13 @@ static int option_probe(struct usb_serial *serial, serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff) return -ENODEV; + /* Don't bind network interfaces on Huawei K3765 & K4505 */ + if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID && + (serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 || + serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) && + serial->interface->cur_altsetting->desc.bInterfaceNumber == 1) + return -ENODEV; + data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); if (!data) diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c new file mode 100644 index 0000000..6e82d4f --- /dev/null +++ b/drivers/usb/serial/ssu100.c @@ -0,0 +1,698 @@ +/* + * usb-serial driver for Quatech SSU-100 + * + * based on ftdi_sio.c and the original serqt_usb.c from Quatech + * + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define QT_OPEN_CLOSE_CHANNEL 0xca +#define QT_SET_GET_DEVICE 0xc2 +#define QT_SET_GET_REGISTER 0xc0 +#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc +#define QT_SET_ATF 0xcd +#define QT_GET_SET_UART 0xc1 +#define QT_TRANSFER_IN 0xc0 +#define QT_HW_FLOW_CONTROL_MASK 0xc5 +#define QT_SW_FLOW_CONTROL_MASK 0xc6 + +#define MODEM_CTL_REGISTER 0x04 +#define MODEM_STATUS_REGISTER 0x06 + + +#define SERIAL_LSR_OE 0x02 +#define SERIAL_LSR_PE 0x04 +#define SERIAL_LSR_FE 0x08 +#define SERIAL_LSR_BI 0x10 + +#define SERIAL_LSR_TEMT 0x40 + +#define SERIAL_MCR_DTR 0x01 +#define SERIAL_MCR_RTS 0x02 +#define SERIAL_MCR_LOOP 0x10 + +#define SERIAL_MSR_CTS 0x10 +#define SERIAL_MSR_CD 0x80 +#define SERIAL_MSR_RI 0x40 +#define SERIAL_MSR_DSR 0x20 +#define SERIAL_MSR_MASK 0xf0 + +#define SERIAL_CRTSCTS ((SERIAL_MCR_RTS << 8) | SERIAL_MSR_CTS) + +#define SERIAL_8_DATA 0x03 +#define SERIAL_7_DATA 0x02 +#define SERIAL_6_DATA 0x01 +#define SERIAL_5_DATA 0x00 + +#define SERIAL_ODD_PARITY 0X08 +#define SERIAL_EVEN_PARITY 0X18 + +#define MAX_BAUD_RATE 460800 + +#define ATC_DISABLED 0x00 +#define DUPMODE_BITS 0xc0 +#define RR_BITS 0x03 +#define LOOPMODE_BITS 0x41 +#define RS232_MODE 0x00 +#define RTSCTS_TO_CONNECTOR 0x40 +#define CLKS_X4 0x02 +#define FULLPWRBIT 0x00000080 +#define NEXT_BOARD_POWER_BIT 0x00000004 + +static int debug = 1; + +/* Version Information */ +#define DRIVER_VERSION "v0.1" +#define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver" + +#define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */ +#define QUATECH_SSU100 0xC020 /* SSU100 */ + +static const struct usb_device_id id_table[] = { + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)}, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table); + + +static struct usb_driver ssu100_driver = { + .name = "ssu100", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .suspend = usb_serial_suspend, + .resume = usb_serial_resume, + .no_dynamic_id = 1, + .supports_autosuspend = 1, +}; + +struct ssu100_port_private { + u8 shadowLSR; + u8 shadowMSR; + wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ + unsigned short max_packet_size; +}; + +static void ssu100_release(struct usb_serial *serial) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port); + + dbg("%s", __func__); + kfree(priv); +} + +static inline int ssu100_control_msg(struct usb_device *dev, + u8 request, u16 data, u16 index) +{ + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + request, 0x40, data, index, + NULL, 0, 300); +} + +static inline int ssu100_setdevice(struct usb_device *dev, u8 *data) +{ + u16 x = ((u16)(data[1] << 8) | (u16)(data[0])); + + return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0); +} + + +static inline int ssu100_getdevice(struct usb_device *dev, u8 *data) +{ + return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_SET_GET_DEVICE, 0xc0, 0, 0, + data, 3, 300); +} + +static inline int ssu100_getregister(struct usb_device *dev, + unsigned short uart, + unsigned short reg, + u8 *data) +{ + return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_SET_GET_REGISTER, 0xc0, reg, + uart, data, sizeof(*data), 300); + +} + + +static inline int ssu100_setregister(struct usb_device *dev, + unsigned short uart, + u16 data) +{ + u16 value = (data << 8) | MODEM_CTL_REGISTER; + + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + QT_SET_GET_REGISTER, 0x40, value, uart, + NULL, 0, 300); + +} + +#define set_mctrl(dev, set) update_mctrl((dev), (set), 0) +#define clear_mctrl(dev, clear) update_mctrl((dev), 0, (clear)) + +/* these do not deal with device that have more than 1 port */ +static inline int update_mctrl(struct usb_device *dev, unsigned int set, + unsigned int clear) +{ + unsigned urb_value; + int result; + + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { + dbg("%s - DTR|RTS not being set|cleared", __func__); + return 0; /* no change */ + } + + clear &= ~set; /* 'set' takes precedence over 'clear' */ + urb_value = 0; + if (set & TIOCM_DTR) + urb_value |= SERIAL_MCR_DTR; + if (set & TIOCM_RTS) + urb_value |= SERIAL_MCR_RTS; + + result = ssu100_setregister(dev, 0, urb_value); + if (result < 0) + dbg("%s Error from MODEM_CTRL urb", __func__); + + return result; +} + +static int ssu100_initdevice(struct usb_device *dev) +{ + u8 *data; + int result = 0; + + dbg("%s", __func__); + + data = kzalloc(3, GFP_KERNEL); + if (!data) + return -ENOMEM; + + result = ssu100_getdevice(dev, data); + if (result < 0) { + dbg("%s - get_device failed %i", __func__, result); + goto out; + } + + data[1] &= ~FULLPWRBIT; + + result = ssu100_setdevice(dev, data); + if (result < 0) { + dbg("%s - setdevice failed %i", __func__, result); + goto out; + } + + result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0); + if (result < 0) { + dbg("%s - set prebuffer level failed %i", __func__, result); + goto out; + } + + result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0); + if (result < 0) { + dbg("%s - set ATFprebuffer level failed %i", __func__, result); + goto out; + } + + result = ssu100_getdevice(dev, data); + if (result < 0) { + dbg("%s - get_device failed %i", __func__, result); + goto out; + } + + data[0] &= ~(RR_BITS | DUPMODE_BITS); + data[0] |= CLKS_X4; + data[1] &= ~(LOOPMODE_BITS); + data[1] |= RS232_MODE; + + result = ssu100_setdevice(dev, data); + if (result < 0) { + dbg("%s - setdevice failed %i", __func__, result); + goto out; + } + +out: kfree(data); + return result; + +} + + +static void ssu100_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) +{ + struct usb_device *dev = port->serial->dev; + struct ktermios *termios = tty->termios; + u16 baud, divisor, remainder; + unsigned int cflag = termios->c_cflag; + u16 urb_value = 0; /* will hold the new flags */ + int result; + + dbg("%s", __func__); + + if (cflag & PARENB) { + if (cflag & PARODD) + urb_value |= SERIAL_ODD_PARITY; + else + urb_value |= SERIAL_EVEN_PARITY; + } + + switch (cflag & CSIZE) { + case CS5: + urb_value |= SERIAL_5_DATA; + break; + case CS6: + urb_value |= SERIAL_6_DATA; + break; + case CS7: + urb_value |= SERIAL_7_DATA; + break; + default: + case CS8: + urb_value |= SERIAL_8_DATA; + break; + } + + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; + + dbg("%s - got baud = %d\n", __func__, baud); + + + divisor = MAX_BAUD_RATE / baud; + remainder = MAX_BAUD_RATE % baud; + if (((remainder * 2) >= baud) && (baud != 110)) + divisor++; + + urb_value = urb_value << 8; + + result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value); + if (result < 0) + dbg("%s - set uart failed", __func__); + + if (cflag & CRTSCTS) + result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, + SERIAL_CRTSCTS, 0); + else + result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, + 0, 0); + if (result < 0) + dbg("%s - set HW flow control failed", __func__); + + if (I_IXOFF(tty) || I_IXON(tty)) { + u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty))); + + result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, + x, 0); + } else + result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, + 0, 0); + + if (result < 0) + dbg("%s - set SW flow control failed", __func__); + +} + + +static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_device *dev = port->serial->dev; + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + u8 *data; + int result; + + dbg("%s - port %d", __func__, port->number); + + data = kzalloc(2, GFP_KERNEL); + if (!data) + return -ENOMEM; + + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_OPEN_CLOSE_CHANNEL, + QT_TRANSFER_IN, 0x01, + 0, data, 2, 300); + if (result < 0) { + dbg("%s - open failed %i", __func__, result); + kfree(data); + return result; + } + + priv->shadowLSR = data[0] & (SERIAL_LSR_OE | SERIAL_LSR_PE | + SERIAL_LSR_FE | SERIAL_LSR_BI); + + priv->shadowMSR = data[1] & (SERIAL_MSR_CTS | SERIAL_MSR_DSR | + SERIAL_MSR_RI | SERIAL_MSR_CD); + + kfree(data); + +/* set to 9600 */ + result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300); + if (result < 0) + dbg("%s - set uart failed", __func__); + + if (tty) + ssu100_set_termios(tty, port, tty->termios); + + return usb_serial_generic_open(tty, port); +} + +static void ssu100_close(struct usb_serial_port *port) +{ + dbg("%s", __func__); + usb_serial_generic_close(port); +} + +static int get_serial_info(struct usb_serial_port *port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + tmp.line = port->serial->minor; + tmp.port = 0; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = port->bulk_out_size; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = 30*HZ; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int ssu100_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + + dbg("%s cmd 0x%04x", __func__, cmd); + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(port, + (struct serial_struct __user *) arg); + + case TIOCMIWAIT: + while (priv != NULL) { + u8 prevMSR = priv->shadowMSR & SERIAL_MSR_MASK; + interruptible_sleep_on(&priv->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + else { + u8 diff = (priv->shadowMSR & SERIAL_MSR_MASK) ^ prevMSR; + if (!diff) + return -EIO; /* no change => error */ + + /* Return 0 if caller wanted to know about + these bits */ + + if (((arg & TIOCM_RNG) && (diff & SERIAL_MSR_RI)) || + ((arg & TIOCM_DSR) && (diff & SERIAL_MSR_DSR)) || + ((arg & TIOCM_CD) && (diff & SERIAL_MSR_CD)) || + ((arg & TIOCM_CTS) && (diff & SERIAL_MSR_CTS))) + return 0; + } + } + return 0; + + default: + break; + } + + dbg("%s arg not supported", __func__); + + return -ENOIOCTLCMD; +} + +static void ssu100_set_max_packet_size(struct usb_serial_port *port) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + struct usb_device *udev = serial->dev; + + struct usb_interface *interface = serial->interface; + struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc; + + unsigned num_endpoints; + int i; + + num_endpoints = interface->cur_altsetting->desc.bNumEndpoints; + dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints); + + for (i = 0; i < num_endpoints; i++) { + dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1, + interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize); + ep_desc = &interface->cur_altsetting->endpoint[i].desc; + } + + /* set max packet size based on descriptor */ + priv->max_packet_size = ep_desc->wMaxPacketSize; + + dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size); +} + +static int ssu100_attach(struct usb_serial *serial) +{ + struct ssu100_port_private *priv; + struct usb_serial_port *port = *serial->port; + + dbg("%s", __func__); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__, + sizeof(*priv)); + return -ENOMEM; + } + + init_waitqueue_head(&priv->delta_msr_wait); + usb_set_serial_port_data(port, priv); + + ssu100_set_max_packet_size(port); + + return ssu100_initdevice(serial->dev); +} + +static int ssu100_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_device *dev = port->serial->dev; + u8 *d; + int r; + + dbg("%s\n", __func__); + + d = kzalloc(2, GFP_KERNEL); + if (!d) + return -ENOMEM; + + r = ssu100_getregister(dev, 0, MODEM_CTL_REGISTER, d); + if (r < 0) + goto mget_out; + + r = ssu100_getregister(dev, 0, MODEM_STATUS_REGISTER, d+1); + if (r < 0) + goto mget_out; + + r = (d[0] & SERIAL_MCR_DTR ? TIOCM_DTR : 0) | + (d[0] & SERIAL_MCR_RTS ? TIOCM_RTS : 0) | + (d[1] & SERIAL_MSR_CTS ? TIOCM_CTS : 0) | + (d[1] & SERIAL_MSR_CD ? TIOCM_CAR : 0) | + (d[1] & SERIAL_MSR_RI ? TIOCM_RI : 0) | + (d[1] & SERIAL_MSR_DSR ? TIOCM_DSR : 0); + +mget_out: + kfree(d); + return r; +} + +static int ssu100_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_device *dev = port->serial->dev; + + dbg("%s\n", __func__); + return update_mctrl(dev, set, clear); +} + +static void ssu100_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_device *dev = port->serial->dev; + + dbg("%s\n", __func__); + + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) { + /* Disable flow control */ + if (!on && + ssu100_setregister(dev, 0, 0) < 0) + dev_err(&port->dev, "error from flowcontrol urb\n"); + /* drop RTS and DTR */ + if (on) + set_mctrl(dev, TIOCM_DTR | TIOCM_RTS); + else + clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS); + } + mutex_unlock(&port->serial->disc_mutex); +} + +static int ssu100_process_packet(struct tty_struct *tty, + struct usb_serial_port *port, + struct ssu100_port_private *priv, + char *packet, int len) +{ + int i; + char flag; + char *ch; + + dbg("%s - port %d", __func__, port->number); + + if (len < 4) { + dbg("%s - malformed packet", __func__); + return 0; + } + + if ((packet[0] == 0x1b) && (packet[1] == 0x1b) && + ((packet[2] == 0x00) || (packet[2] == 0x01))) { + if (packet[2] == 0x00) + priv->shadowLSR = packet[3] & (SERIAL_LSR_OE | + SERIAL_LSR_PE | + SERIAL_LSR_FE | + SERIAL_LSR_BI); + + if (packet[2] == 0x01) { + priv->shadowMSR = packet[3]; + wake_up_interruptible(&priv->delta_msr_wait); + } + + len -= 4; + ch = packet + 4; + } else + ch = packet; + + if (!len) + return 0; /* status only */ + + if (port->port.console && port->sysrq) { + for (i = 0; i < len; i++, ch++) { + if (!usb_serial_handle_sysrq_char(tty, port, *ch)) + tty_insert_flip_char(tty, *ch, flag); + } + } else + tty_insert_flip_string_fixed_flag(tty, ch, flag, len); + + return len; +} + +static void ssu100_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + char *data = (char *)urb->transfer_buffer; + struct tty_struct *tty; + int count = 0; + int i; + int len; + + dbg("%s", __func__); + + tty = tty_port_tty_get(&port->port); + if (!tty) + return; + + for (i = 0; i < urb->actual_length; i += priv->max_packet_size) { + len = min_t(int, urb->actual_length - i, priv->max_packet_size); + count += ssu100_process_packet(tty, port, priv, &data[i], len); + } + + if (count) + tty_flip_buffer_push(tty); + tty_kref_put(tty); +} + + +static struct usb_serial_driver ssu100_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ssu100", + }, + .description = DRIVER_DESC, + .id_table = id_table, + .usb_driver = &ssu100_driver, + .num_ports = 1, + .bulk_in_size = 256, + .bulk_out_size = 256, + .open = ssu100_open, + .close = ssu100_close, + .attach = ssu100_attach, + .release = ssu100_release, + .dtr_rts = ssu100_dtr_rts, + .process_read_urb = ssu100_process_read_urb, + .tiocmget = ssu100_tiocmget, + .tiocmset = ssu100_tiocmset, + .ioctl = ssu100_ioctl, + .set_termios = ssu100_set_termios, +}; + +static int __init ssu100_init(void) +{ + int retval; + + dbg("%s", __func__); + + /* register with usb-serial */ + retval = usb_serial_register(&ssu100_device); + + if (retval) + goto failed_usb_sio_register; + + retval = usb_register(&ssu100_driver); + if (retval) + goto failed_usb_register; + + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); + + return 0; + +failed_usb_register: + usb_serial_deregister(&ssu100_device); +failed_usb_sio_register: + return retval; +} + +static void __exit ssu100_exit(void) +{ + usb_deregister(&ssu100_driver); + usb_serial_deregister(&ssu100_device); +} + +module_init(ssu100_init); +module_exit(ssu100_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 941c2d4..2a982e6 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -653,6 +653,7 @@ exit: return id; } +/* Caller must hold table_lock */ static struct usb_serial_driver *search_serial_device( struct usb_interface *iface) { @@ -718,17 +719,23 @@ int usb_serial_probe(struct usb_interface *interface, int num_ports = 0; int max_endpoints; - lock_kernel(); /* guard against unloading a serial driver module */ + mutex_lock(&table_lock); type = search_serial_device(interface); if (!type) { - unlock_kernel(); + mutex_unlock(&table_lock); dbg("none matched"); return -ENODEV; } + if (!try_module_get(type->driver.owner)) { + mutex_unlock(&table_lock); + dev_err(&interface->dev, "module get failed, exiting\n"); + return -EIO; + } + mutex_unlock(&table_lock); + serial = create_serial(dev, interface, type); if (!serial) { - unlock_kernel(); dev_err(&interface->dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -737,20 +744,11 @@ int usb_serial_probe(struct usb_interface *interface, if (type->probe) { const struct usb_device_id *id; - if (!try_module_get(type->driver.owner)) { - unlock_kernel(); - dev_err(&interface->dev, - "module get failed, exiting\n"); - kfree(serial); - return -EIO; - } - id = get_iface_id(type, interface); retval = type->probe(serial, id); module_put(type->driver.owner); if (retval) { - unlock_kernel(); dbg("sub driver rejected device"); kfree(serial); return retval; @@ -822,7 +820,6 @@ int usb_serial_probe(struct usb_interface *interface, * properly during a later invocation of usb_serial_probe */ if (num_bulk_in == 0 || num_bulk_out == 0) { - unlock_kernel(); dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n"); kfree(serial); return -ENODEV; @@ -835,7 +832,6 @@ int usb_serial_probe(struct usb_interface *interface, if (type == &usb_serial_generic_device) { num_ports = num_bulk_out; if (num_ports == 0) { - unlock_kernel(); dev_err(&interface->dev, "Generic device with no bulk out, not allowed.\n"); kfree(serial); @@ -847,7 +843,6 @@ int usb_serial_probe(struct usb_interface *interface, /* if this device type has a calc_num_ports function, call it */ if (type->calc_num_ports) { if (!try_module_get(type->driver.owner)) { - unlock_kernel(); dev_err(&interface->dev, "module get failed, exiting\n"); kfree(serial); @@ -878,7 +873,6 @@ int usb_serial_probe(struct usb_interface *interface, max_endpoints = max(max_endpoints, num_interrupt_out); max_endpoints = max(max_endpoints, (int)serial->num_ports); serial->num_port_pointers = max_endpoints; - unlock_kernel(); dbg("%s - setting up %d port structures for this device", __func__, max_endpoints); @@ -1077,6 +1071,8 @@ int usb_serial_probe(struct usb_interface *interface, dev_set_name(&port->dev, "ttyUSB%d", port->number); dbg ("%s - registering %s", __func__, dev_name(&port->dev)); port->dev_state = PORT_REGISTERING; + device_enable_async_suspend(&port->dev); + retval = device_add(&port->dev); if (retval) { dev_err(&port->dev, "Error registering port device, " @@ -1349,6 +1345,7 @@ int usb_serial_register(struct usb_serial_driver *driver) driver->description = driver->driver.name; /* Add this device to our list of devices */ + mutex_lock(&table_lock); list_add(&driver->driver_list, &usb_serial_driver_list); retval = usb_serial_bus_register(driver); @@ -1360,6 +1357,7 @@ int usb_serial_register(struct usb_serial_driver *driver) printk(KERN_INFO "USB Serial support registered for %s\n", driver->description); + mutex_unlock(&table_lock); return retval; } EXPORT_SYMBOL_GPL(usb_serial_register); @@ -1370,8 +1368,10 @@ void usb_serial_deregister(struct usb_serial_driver *device) /* must be called with BKL held */ printk(KERN_INFO "USB Serial deregistering driver %s\n", device->description); + mutex_lock(&table_lock); list_del(&device->driver_list); usb_serial_bus_deregister(device); + mutex_unlock(&table_lock); } EXPORT_SYMBOL_GPL(usb_serial_deregister); diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 54cc942..6542ca4 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -269,7 +269,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) /* The firmware will time-out commands after 20 seconds. Some commands * can legitimately take longer than this, so we use a different * command that only waits for the interrupt and then sends status, - * without having to send a new ATAPI command to the device. + * without having to send a new ATAPI command to the device. * * NOTE: There is some indication that a data transfer after a timeout * may not work, but that is a condition that should never happen. @@ -324,14 +324,14 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) /* Find the length we desire to read. */ switch (srb->cmnd[0]) { - case INQUIRY: - case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */ - case MODE_SENSE: - case MODE_SENSE_10: - length = le16_to_cpu(fst->Count); - break; - default: - length = scsi_bufflen(srb); + case INQUIRY: + case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */ + case MODE_SENSE: + case MODE_SENSE_10: + length = le16_to_cpu(fst->Count); + break; + default: + length = scsi_bufflen(srb); } /* verify that this amount is legal */ @@ -414,7 +414,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) /* should never hit here -- filtered in usb.c */ US_DEBUGP ("freecom unimplemented direction: %d\n", us->srb->sc_data_direction); - // Return fail, SCSI seems to handle this better. + /* Return fail, SCSI seems to handle this better. */ return USB_STOR_TRANSPORT_FAILED; break; } @@ -494,8 +494,7 @@ static void pdump (void *ibuffer, int length) offset = 0; } offset += sprintf (line+offset, "%08x:", i); - } - else if ((i & 7) == 0) { + } else if ((i & 7) == 0) { offset += sprintf (line+offset, " -"); } offset += sprintf (line+offset, " %02x", buffer[i] & 0xff); diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index e9cbc14..6b9982c 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -1456,8 +1456,7 @@ static int isd200_init_info(struct us_data *us) int retStatus = ISD200_GOOD; struct isd200_info *info; - info = (struct isd200_info *) - kzalloc(sizeof(struct isd200_info), GFP_KERNEL); + info = kzalloc(sizeof(struct isd200_info), GFP_KERNEL); if (!info) retStatus = ISD200_ERROR; else { diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index a7d0bf9..90bb017 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -336,6 +336,7 @@ static int usb_stor_control_thread(void * __us) else { US_DEBUG(usb_stor_show_command(us->srb)); us->proto_handler(us->srb, us); + usb_mark_last_busy(us->pusb_dev); } /* lock access to the state */ @@ -845,6 +846,7 @@ static int usb_stor_scan_thread(void * __us) /* Should we unbind if no devices were detected? */ } + usb_autopm_put_interface(us->pusb_intf); complete_and_exit(&us->scanning_done, 0); } @@ -968,6 +970,7 @@ int usb_stor_probe2(struct us_data *us) goto BadDevice; } + usb_autopm_get_interface_no_resume(us->pusb_intf); wake_up_process(th); return 0; @@ -1040,6 +1043,7 @@ static struct usb_driver usb_storage_driver = { .pre_reset = usb_stor_pre_reset, .post_reset = usb_stor_post_reset, .id_table = usb_storage_usb_ids, + .supports_autosuspend = 1, .soft_unbind = 1, }; diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index d110588..552679b 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -142,7 +142,7 @@ static int skel_release(struct inode *inode, struct file *file) { struct usb_skel *dev; - dev = (struct usb_skel *)file->private_data; + dev = file->private_data; if (dev == NULL) return -ENODEV; @@ -162,7 +162,7 @@ static int skel_flush(struct file *file, fl_owner_t id) struct usb_skel *dev; int res; - dev = (struct usb_skel *)file->private_data; + dev = file->private_data; if (dev == NULL) return -ENODEV; @@ -246,7 +246,7 @@ static ssize_t skel_read(struct file *file, char *buffer, size_t count, int rv; bool ongoing_io; - dev = (struct usb_skel *)file->private_data; + dev = file->private_data; /* if we cannot read at all, return EOF */ if (!dev->bulk_in_urb || !count) @@ -401,7 +401,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, char *buf = NULL; size_t writesize = min(count, (size_t)MAX_TRANSFER); - dev = (struct usb_skel *)file->private_data; + dev = file->private_data; /* verify that we actually have some data to write */ if (count == 0) diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 3b3f574..26bf7cb 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -283,7 +283,8 @@ static inline int fbcon_is_inactive(struct vc_data *vc, struct fb_info *info) struct fbcon_ops *ops = info->fbcon_par; return (info->state != FBINFO_STATE_RUNNING || - vc->vc_mode != KD_TEXT || ops->graphics); + vc->vc_mode != KD_TEXT || ops->graphics) && + !vt_force_oops_output(vc); } static inline int get_color(struct vc_data *vc, struct fb_info *info, @@ -1073,6 +1074,7 @@ static void fbcon_init(struct vc_data *vc, int init) if (p->userfont) charcnt = FNTCHARCNT(p->fontdata); + vc->vc_panic_force_write = !!(info->flags & FBINFO_CAN_FORCE_OUTPUT); vc->vc_can_do_color = (fb_get_color_depth(&info->var, &info->fix)!=1); vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800; if (charcnt == 256) { diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 182dd6f..54e32c5 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1108,7 +1108,6 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512) charmap += 4 * cmapsz; #endif - unlock_kernel(); spin_lock_irq(&vga_lock); /* First, the Sequencer */ vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x1); @@ -1192,7 +1191,6 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512) vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0); } spin_unlock_irq(&vga_lock); - lock_kernel(); return 0; } diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c index e66b8b1..d8b12c3 100644 --- a/drivers/video/w100fb.c +++ b/drivers/video/w100fb.c @@ -858,9 +858,9 @@ unsigned long w100fb_gpio_read(int port) void w100fb_gpio_write(int port, unsigned long value) { if (port==W100_GPIO_PORT_A) - value = writel(value, remapped_regs + mmGPIO_DATA); + writel(value, remapped_regs + mmGPIO_DATA); else - value = writel(value, remapped_regs + mmGPIO_DATA2); + writel(value, remapped_regs + mmGPIO_DATA2); } EXPORT_SYMBOL(w100fb_gpio_read); EXPORT_SYMBOL(w100fb_gpio_write); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index b04b184..4d2992a 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -73,6 +73,13 @@ config WM8350_WATCHDOG # ARM Architecture +config ARM_SP805_WATCHDOG + tristate "ARM SP805 Watchdog" + depends on ARM_AMBA + help + ARM Primecell SP805 Watchdog timer. This will reboot your system when + the timeout is reached. + config AT91RM9200_WATCHDOG tristate "AT91RM9200 watchdog" depends on ARCH_AT91RM9200 @@ -401,6 +408,17 @@ config ALIM7101_WDT Most people will say N. +config F71808E_WDT + tristate "Fintek F71808E and F71882FG Watchdog" + depends on X86 && EXPERIMENTAL + help + This is the driver for the hardware watchdog on the Fintek + F71808E and F71882FG Super I/O controllers. + + You can compile this driver directly into the kernel, or use + it as a module. The module will be called f71808e_wdt. + + config GEODE_WDT tristate "AMD Geode CS5535/CS5536 Watchdog" depends on CS5535_MFGPT diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index e30289a..8374503 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o # ALPHA Architecture # ARM Architecture +obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o @@ -66,6 +67,7 @@ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o +obj-$(CONFIG_F71808E_WDT) += f71808e_wdt.o obj-$(CONFIG_GEODE_WDT) += geodewdt.o obj-$(CONFIG_SC520_WDT) += sc520_wdt.o obj-$(CONFIG_SBC_FITPC2_WATCHDOG) += sbc_fitpc2_wdt.o diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c new file mode 100644 index 0000000..7e5c266 --- /dev/null +++ b/drivers/watchdog/f71808e_wdt.c @@ -0,0 +1,768 @@ +/*************************************************************************** + * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> * + * Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com> * + * Copyright (C) 2010 Giel van Schijndel <me@mortis.eu> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +#include <linux/err.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/uaccess.h> +#include <linux/watchdog.h> + +#define DRVNAME "f71808e_wdt" + +#define SIO_F71808FG_LD_WDT 0x07 /* Watchdog timer logical device */ +#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ +#define SIO_LOCK_KEY 0xAA /* Key to diasble Super-I/O */ + +#define SIO_REG_LDSEL 0x07 /* Logical device select */ +#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ +#define SIO_REG_DEVREV 0x22 /* Device revision */ +#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */ +#define SIO_REG_ENABLE 0x30 /* Logical device enable */ +#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ + +#define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */ +#define SIO_F71808_ID 0x0901 /* Chipset ID */ +#define SIO_F71858_ID 0x0507 /* Chipset ID */ +#define SIO_F71862_ID 0x0601 /* Chipset ID */ +#define SIO_F71882_ID 0x0541 /* Chipset ID */ +#define SIO_F71889_ID 0x0723 /* Chipset ID */ + +#define F71882FG_REG_START 0x01 + +#define F71808FG_REG_WDO_CONF 0xf0 +#define F71808FG_REG_WDT_CONF 0xf5 +#define F71808FG_REG_WD_TIME 0xf6 + +#define F71808FG_FLAG_WDOUT_EN 7 + +#define F71808FG_FLAG_WDTMOUT_STS 5 +#define F71808FG_FLAG_WD_EN 5 +#define F71808FG_FLAG_WD_PULSE 4 +#define F71808FG_FLAG_WD_UNIT 3 + +/* Default values */ +#define WATCHDOG_TIMEOUT 60 /* 1 minute default timeout */ +#define WATCHDOG_MAX_TIMEOUT (60 * 255) +#define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for + watchdog signal */ + +static unsigned short force_id; +module_param(force_id, ushort, 0); +MODULE_PARM_DESC(force_id, "Override the detected device ID"); + +static const int max_timeout = WATCHDOG_MAX_TIMEOUT; +static int timeout = 60; /* default timeout in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1<= timeout <=" + __MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH; +module_param(pulse_width, uint, 0); +MODULE_PARM_DESC(pulse_width, + "Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms" + " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")"); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0444); +MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); + +static unsigned int start_withtimeout; +module_param(start_withtimeout, uint, 0); +MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with" + " given initial timeout. Zero (default) disables this feature."); + +enum chips { f71808fg, f71858fg, f71862fg, f71882fg, f71889fg }; + +static const char *f71808e_names[] = { + "f71808fg", + "f71858fg", + "f71862fg", + "f71882fg", + "f71889fg", +}; + +/* Super-I/O Function prototypes */ +static inline int superio_inb(int base, int reg); +static inline int superio_inw(int base, int reg); +static inline void superio_outb(int base, int reg, u8 val); +static inline void superio_set_bit(int base, int reg, int bit); +static inline void superio_clear_bit(int base, int reg, int bit); +static inline int superio_enter(int base); +static inline void superio_select(int base, int ld); +static inline void superio_exit(int base); + +struct watchdog_data { + unsigned short sioaddr; + enum chips type; + unsigned long opened; + struct mutex lock; + char expect_close; + struct watchdog_info ident; + + unsigned short timeout; + u8 timer_val; /* content for the wd_time register */ + char minutes_mode; + u8 pulse_val; /* pulse width flag */ + char pulse_mode; /* enable pulse output mode? */ + char caused_reboot; /* last reboot was by the watchdog */ +}; + +static struct watchdog_data watchdog = { + .lock = __MUTEX_INITIALIZER(watchdog.lock), +}; + +/* Super I/O functions */ +static inline int superio_inb(int base, int reg) +{ + outb(reg, base); + return inb(base + 1); +} + +static int superio_inw(int base, int reg) +{ + int val; + val = superio_inb(base, reg) << 8; + val |= superio_inb(base, reg + 1); + return val; +} + +static inline void superio_outb(int base, int reg, u8 val) +{ + outb(reg, base); + outb(val, base + 1); +} + +static inline void superio_set_bit(int base, int reg, int bit) +{ + unsigned long val = superio_inb(base, reg); + __set_bit(bit, &val); + superio_outb(base, reg, val); +} + +static inline void superio_clear_bit(int base, int reg, int bit) +{ + unsigned long val = superio_inb(base, reg); + __clear_bit(bit, &val); + superio_outb(base, reg, val); +} + +static inline int superio_enter(int base) +{ + /* Don't step on other drivers' I/O space by accident */ + if (!request_muxed_region(base, 2, DRVNAME)) { + printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n", + (int)base); + return -EBUSY; + } + + /* according to the datasheet the key must be send twice! */ + outb(SIO_UNLOCK_KEY, base); + outb(SIO_UNLOCK_KEY, base); + + return 0; +} + +static inline void superio_select(int base, int ld) +{ + outb(SIO_REG_LDSEL, base); + outb(ld, base + 1); +} + +static inline void superio_exit(int base) +{ + outb(SIO_LOCK_KEY, base); + release_region(base, 2); +} + +static int watchdog_set_timeout(int timeout) +{ + if (timeout <= 0 + || timeout > max_timeout) { + printk(KERN_ERR DRVNAME ": watchdog timeout out of range\n"); + return -EINVAL; + } + + mutex_lock(&watchdog.lock); + + watchdog.timeout = timeout; + if (timeout > 0xff) { + watchdog.timer_val = DIV_ROUND_UP(timeout, 60); + watchdog.minutes_mode = true; + } else { + watchdog.timer_val = timeout; + watchdog.minutes_mode = false; + } + + mutex_unlock(&watchdog.lock); + + return 0; +} + +static int watchdog_set_pulse_width(unsigned int pw) +{ + int err = 0; + + mutex_lock(&watchdog.lock); + + if (pw <= 1) { + watchdog.pulse_val = 0; + } else if (pw <= 25) { + watchdog.pulse_val = 1; + } else if (pw <= 125) { + watchdog.pulse_val = 2; + } else if (pw <= 5000) { + watchdog.pulse_val = 3; + } else { + printk(KERN_ERR DRVNAME ": pulse width out of range\n"); + err = -EINVAL; + goto exit_unlock; + } + + watchdog.pulse_mode = pw; + +exit_unlock: + mutex_unlock(&watchdog.lock); + return err; +} + +static int watchdog_keepalive(void) +{ + int err = 0; + + mutex_lock(&watchdog.lock); + err = superio_enter(watchdog.sioaddr); + if (err) + goto exit_unlock; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + if (watchdog.minutes_mode) + /* select minutes for timer units */ + superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_UNIT); + else + /* select seconds for timer units */ + superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_UNIT); + + /* Set timer value */ + superio_outb(watchdog.sioaddr, F71808FG_REG_WD_TIME, + watchdog.timer_val); + + superio_exit(watchdog.sioaddr); + +exit_unlock: + mutex_unlock(&watchdog.lock); + return err; +} + +static int watchdog_start(void) +{ + /* Make sure we don't die as soon as the watchdog is enabled below */ + int err = watchdog_keepalive(); + if (err) + return err; + + mutex_lock(&watchdog.lock); + err = superio_enter(watchdog.sioaddr); + if (err) + goto exit_unlock; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + /* Watchdog pin configuration */ + switch (watchdog.type) { + case f71808fg: + /* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */ + superio_clear_bit(watchdog.sioaddr, 0x2a, 3); + superio_clear_bit(watchdog.sioaddr, 0x2b, 3); + break; + + case f71882fg: + /* Set pin 56 to WDTRST# */ + superio_set_bit(watchdog.sioaddr, 0x29, 1); + break; + + default: + /* + * 'default' label to shut up the compiler and catch + * programmer errors + */ + err = -ENODEV; + goto exit_superio; + } + + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0); + superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDO_CONF, + F71808FG_FLAG_WDOUT_EN); + + superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_EN); + + if (watchdog.pulse_mode) { + /* Select "pulse" output mode with given duration */ + u8 wdt_conf = superio_inb(watchdog.sioaddr, + F71808FG_REG_WDT_CONF); + + /* Set WD_PSWIDTH bits (1:0) */ + wdt_conf = (wdt_conf & 0xfc) | (watchdog.pulse_val & 0x03); + /* Set WD_PULSE to "pulse" mode */ + wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE); + + superio_outb(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + wdt_conf); + } else { + /* Select "level" output mode */ + superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_PULSE); + } + +exit_superio: + superio_exit(watchdog.sioaddr); +exit_unlock: + mutex_unlock(&watchdog.lock); + + return err; +} + +static int watchdog_stop(void) +{ + int err = 0; + + mutex_lock(&watchdog.lock); + err = superio_enter(watchdog.sioaddr); + if (err) + goto exit_unlock; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_EN); + + superio_exit(watchdog.sioaddr); + +exit_unlock: + mutex_unlock(&watchdog.lock); + + return err; +} + +static int watchdog_get_status(void) +{ + int status = 0; + + mutex_lock(&watchdog.lock); + status = (watchdog.caused_reboot) ? WDIOF_CARDRESET : 0; + mutex_unlock(&watchdog.lock); + + return status; +} + +static bool watchdog_is_running(void) +{ + /* + * if we fail to determine the watchdog's status assume it to be + * running to be on the safe side + */ + bool is_running = true; + + mutex_lock(&watchdog.lock); + if (superio_enter(watchdog.sioaddr)) + goto exit_unlock; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + is_running = (superio_inb(watchdog.sioaddr, SIO_REG_ENABLE) & BIT(0)) + && (superio_inb(watchdog.sioaddr, F71808FG_REG_WDT_CONF) + & F71808FG_FLAG_WD_EN); + + superio_exit(watchdog.sioaddr); + +exit_unlock: + mutex_unlock(&watchdog.lock); + return is_running; +} + +/* /dev/watchdog api */ + +static int watchdog_open(struct inode *inode, struct file *file) +{ + int err; + + /* If the watchdog is alive we don't need to start it again */ + if (test_and_set_bit(0, &watchdog.opened)) + return -EBUSY; + + err = watchdog_start(); + if (err) { + clear_bit(0, &watchdog.opened); + return err; + } + + if (nowayout) + __module_get(THIS_MODULE); + + watchdog.expect_close = 0; + return nonseekable_open(inode, file); +} + +static int watchdog_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &watchdog.opened); + + if (!watchdog.expect_close) { + watchdog_keepalive(); + printk(KERN_CRIT DRVNAME + ": Unexpected close, not stopping watchdog!\n"); + } else if (!nowayout) { + watchdog_stop(); + } + return 0; +} + +/* + * watchdog_write: + * @file: file handle to the watchdog + * @buf: buffer to write + * @count: count of bytes + * @ppos: pointer to the position to write. No seeks allowed + * + * A write to a watchdog device is defined as a keepalive signal. Any + * write of data will do, as we we don't define content meaning. + */ + +static ssize_t watchdog_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + bool expect_close = false; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + expect_close = (c == 'V'); + } + + /* Properly order writes across fork()ed processes */ + mutex_lock(&watchdog.lock); + watchdog.expect_close = expect_close; + mutex_unlock(&watchdog.lock); + } + + /* someone wrote to us, we should restart timer */ + watchdog_keepalive(); + } + return count; +} + +/* + * watchdog_ioctl: + * @inode: inode of the device + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. + */ +static long watchdog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int status; + int new_options; + int new_timeout; + union { + struct watchdog_info __user *ident; + int __user *i; + } uarg; + + uarg.i = (int __user *)arg; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &watchdog.ident, + sizeof(watchdog.ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + status = watchdog_get_status(); + if (status < 0) + return status; + return put_user(status, uarg.i); + + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + + case WDIOC_SETOPTIONS: + if (get_user(new_options, uarg.i)) + return -EFAULT; + + if (new_options & WDIOS_DISABLECARD) + watchdog_stop(); + + if (new_options & WDIOS_ENABLECARD) + return watchdog_start(); + + + case WDIOC_KEEPALIVE: + watchdog_keepalive(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + + if (watchdog_set_timeout(new_timeout)) + return -EINVAL; + + watchdog_keepalive(); + /* Fall */ + + case WDIOC_GETTIMEOUT: + return put_user(watchdog.timeout, uarg.i); + + default: + return -ENOTTY; + + } +} + +static int watchdog_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + watchdog_stop(); + return NOTIFY_DONE; +} + +static const struct file_operations watchdog_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .open = watchdog_open, + .release = watchdog_release, + .write = watchdog_write, + .unlocked_ioctl = watchdog_ioctl, +}; + +static struct miscdevice watchdog_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &watchdog_fops, +}; + +static struct notifier_block watchdog_notifier = { + .notifier_call = watchdog_notify_sys, +}; + +static int __init watchdog_init(int sioaddr) +{ + int wdt_conf, err = 0; + + /* No need to lock watchdog.lock here because no entry points + * into the module have been registered yet. + */ + watchdog.sioaddr = sioaddr; + watchdog.ident.options = WDIOC_SETTIMEOUT + | WDIOF_MAGICCLOSE + | WDIOF_KEEPALIVEPING; + + snprintf(watchdog.ident.identity, + sizeof(watchdog.ident.identity), "%s watchdog", + f71808e_names[watchdog.type]); + + err = superio_enter(sioaddr); + if (err) + return err; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF); + watchdog.caused_reboot = wdt_conf & F71808FG_FLAG_WDTMOUT_STS; + + superio_exit(sioaddr); + + err = watchdog_set_timeout(timeout); + if (err) + return err; + err = watchdog_set_pulse_width(pulse_width); + if (err) + return err; + + err = register_reboot_notifier(&watchdog_notifier); + if (err) + return err; + + err = misc_register(&watchdog_miscdev); + if (err) { + printk(KERN_ERR DRVNAME + ": cannot register miscdev on minor=%d\n", + watchdog_miscdev.minor); + goto exit_reboot; + } + + if (start_withtimeout) { + if (start_withtimeout <= 0 + || start_withtimeout > max_timeout) { + printk(KERN_ERR DRVNAME + ": starting timeout out of range\n"); + err = -EINVAL; + goto exit_miscdev; + } + + err = watchdog_start(); + if (err) { + printk(KERN_ERR DRVNAME + ": cannot start watchdog timer\n"); + goto exit_miscdev; + } + + mutex_lock(&watchdog.lock); + err = superio_enter(sioaddr); + if (err) + goto exit_unlock; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + if (start_withtimeout > 0xff) { + /* select minutes for timer units */ + superio_set_bit(sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_UNIT); + superio_outb(sioaddr, F71808FG_REG_WD_TIME, + DIV_ROUND_UP(start_withtimeout, 60)); + } else { + /* select seconds for timer units */ + superio_clear_bit(sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_UNIT); + superio_outb(sioaddr, F71808FG_REG_WD_TIME, + start_withtimeout); + } + + superio_exit(sioaddr); + mutex_unlock(&watchdog.lock); + + if (nowayout) + __module_get(THIS_MODULE); + + printk(KERN_INFO DRVNAME + ": watchdog started with initial timeout of %u sec\n", + start_withtimeout); + } + + return 0; + +exit_unlock: + mutex_unlock(&watchdog.lock); +exit_miscdev: + misc_deregister(&watchdog_miscdev); +exit_reboot: + unregister_reboot_notifier(&watchdog_notifier); + + return err; +} + +static int __init f71808e_find(int sioaddr) +{ + u16 devid; + int err = superio_enter(sioaddr); + if (err) + return err; + + devid = superio_inw(sioaddr, SIO_REG_MANID); + if (devid != SIO_FINTEK_ID) { + pr_debug(DRVNAME ": Not a Fintek device\n"); + err = -ENODEV; + goto exit; + } + + devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); + switch (devid) { + case SIO_F71808_ID: + watchdog.type = f71808fg; + break; + case SIO_F71882_ID: + watchdog.type = f71882fg; + break; + case SIO_F71862_ID: + case SIO_F71889_ID: + /* These have a watchdog, though it isn't implemented (yet). */ + err = -ENOSYS; + goto exit; + case SIO_F71858_ID: + /* Confirmed (by datasheet) not to have a watchdog. */ + err = -ENODEV; + goto exit; + default: + printk(KERN_INFO DRVNAME ": Unrecognized Fintek device: %04x\n", + (unsigned int)devid); + err = -ENODEV; + goto exit; + } + + printk(KERN_INFO DRVNAME ": Found %s watchdog chip, revision %d\n", + f71808e_names[watchdog.type], + (int)superio_inb(sioaddr, SIO_REG_DEVREV)); +exit: + superio_exit(sioaddr); + return err; +} + +static int __init f71808e_init(void) +{ + static const unsigned short addrs[] = { 0x2e, 0x4e }; + int err = -ENODEV; + int i; + + for (i = 0; i < ARRAY_SIZE(addrs); i++) { + err = f71808e_find(addrs[i]); + if (err == 0) + break; + } + if (i == ARRAY_SIZE(addrs)) + return err; + + return watchdog_init(addrs[i]); +} + +static void __exit f71808e_exit(void) +{ + if (watchdog_is_running()) { + printk(KERN_WARNING DRVNAME + ": Watchdog timer still running, stopping it\n"); + watchdog_stop(); + } + misc_deregister(&watchdog_miscdev); + unregister_reboot_notifier(&watchdog_notifier); +} + +MODULE_DESCRIPTION("F71808E Watchdog Driver"); +MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>"); +MODULE_LICENSE("GPL"); + +module_init(f71808e_init); +module_exit(f71808e_exit); diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 809e716..fd312fc 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -246,8 +246,8 @@ static int __devinit cru_detect(unsigned long map_entry, physical_bios_offset); printk(KERN_DEBUG "hpwdt: CRU Length: 0x%lx\n", cru_length); - printk(KERN_DEBUG "hpwdt: CRU Mapped Address: 0x%x\n", - (unsigned int)&cru_rom_addr); + printk(KERN_DEBUG "hpwdt: CRU Mapped Address: %p\n", + &cru_rom_addr); } iounmap(bios32_map); return retval; diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 3009325..ae53662 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -532,21 +532,22 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) static int __devexit s3c2410wdt_remove(struct platform_device *dev) { - s3c2410wdt_cpufreq_deregister(); - - release_resource(wdt_mem); - kfree(wdt_mem); - wdt_mem = NULL; + misc_deregister(&s3c2410wdt_miscdev); - free_irq(wdt_irq->start, dev); - wdt_irq = NULL; + s3c2410wdt_cpufreq_deregister(); clk_disable(wdt_clock); clk_put(wdt_clock); wdt_clock = NULL; + free_irq(wdt_irq->start, dev); + wdt_irq = NULL; + iounmap(wdt_base); - misc_deregister(&s3c2410wdt_miscdev); + + release_resource(wdt_mem); + kfree(wdt_mem); + wdt_mem = NULL; return 0; } diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c index 9c40f48..0461858 100644 --- a/drivers/watchdog/sch311x_wdt.c +++ b/drivers/watchdog/sch311x_wdt.c @@ -425,6 +425,8 @@ static int __devinit sch311x_wdt_probe(struct platform_device *pdev) val = therm_trip ? 0x06 : 0x04; outb(val, sch311x_wdt_data.runtime_reg + RESGEN); + sch311x_wdt_miscdev.parent = dev; + err = misc_register(&sch311x_wdt_miscdev); if (err != 0) { dev_err(dev, "cannot register miscdev on minor=%d (err=%d)\n", @@ -432,8 +434,6 @@ static int __devinit sch311x_wdt_probe(struct platform_device *pdev) goto exit_release_region3; } - sch311x_wdt_miscdev.parent = dev; - dev_info(dev, "SMSC SCH311x WDT initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c new file mode 100644 index 0000000..9127eda --- /dev/null +++ b/drivers/watchdog/sp805_wdt.c @@ -0,0 +1,387 @@ +/* + * drivers/char/watchdog/sp805-wdt.c + * + * Watchdog driver for ARM SP805 watchdog module + * + * Copyright (C) 2010 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2 or later. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/device.h> +#include <linux/resource.h> +#include <linux/amba/bus.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/math64.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/uaccess.h> +#include <linux/watchdog.h> + +/* default timeout in seconds */ +#define DEFAULT_TIMEOUT 60 + +#define MODULE_NAME "sp805-wdt" + +/* watchdog register offsets and masks */ +#define WDTLOAD 0x000 + #define LOAD_MIN 0x00000001 + #define LOAD_MAX 0xFFFFFFFF +#define WDTVALUE 0x004 +#define WDTCONTROL 0x008 + /* control register masks */ + #define INT_ENABLE (1 << 0) + #define RESET_ENABLE (1 << 1) +#define WDTINTCLR 0x00C +#define WDTRIS 0x010 +#define WDTMIS 0x014 + #define INT_MASK (1 << 0) +#define WDTLOCK 0xC00 + #define UNLOCK 0x1ACCE551 + #define LOCK 0x00000001 + +/** + * struct sp805_wdt: sp805 wdt device structure + * + * lock: spin lock protecting dev structure and io access + * base: base address of wdt + * clk: clock structure of wdt + * dev: amba device structure of wdt + * status: current status of wdt + * load_val: load value to be set for current timeout + * timeout: current programmed timeout + */ +struct sp805_wdt { + spinlock_t lock; + void __iomem *base; + struct clk *clk; + struct amba_device *adev; + unsigned long status; + #define WDT_BUSY 0 + #define WDT_CAN_BE_CLOSED 1 + unsigned int load_val; + unsigned int timeout; +}; + +/* local variables */ +static struct sp805_wdt *wdt; +static int nowayout = WATCHDOG_NOWAYOUT; + +/* This routine finds load value that will reset system in required timout */ +static void wdt_setload(unsigned int timeout) +{ + u64 load, rate; + + rate = clk_get_rate(wdt->clk); + + /* + * sp805 runs counter with given value twice, after the end of first + * counter it gives an interrupt and then starts counter again. If + * interrupt already occured then it resets the system. This is why + * load is half of what should be required. + */ + load = div_u64(rate, 2) * timeout - 1; + + load = (load > LOAD_MAX) ? LOAD_MAX : load; + load = (load < LOAD_MIN) ? LOAD_MIN : load; + + spin_lock(&wdt->lock); + wdt->load_val = load; + /* roundup timeout to closest positive integer value */ + wdt->timeout = div_u64((load + 1) * 2 + (rate / 2), rate); + spin_unlock(&wdt->lock); +} + +/* returns number of seconds left for reset to occur */ +static u32 wdt_timeleft(void) +{ + u64 load, rate; + + rate = clk_get_rate(wdt->clk); + + spin_lock(&wdt->lock); + load = readl(wdt->base + WDTVALUE); + + /*If the interrupt is inactive then time left is WDTValue + WDTLoad. */ + if (!(readl(wdt->base + WDTRIS) & INT_MASK)) + load += wdt->load_val + 1; + spin_unlock(&wdt->lock); + + return div_u64(load, rate); +} + +/* enables watchdog timers reset */ +static void wdt_enable(void) +{ + spin_lock(&wdt->lock); + + writel(UNLOCK, wdt->base + WDTLOCK); + writel(wdt->load_val, wdt->base + WDTLOAD); + writel(INT_MASK, wdt->base + WDTINTCLR); + writel(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL); + writel(LOCK, wdt->base + WDTLOCK); + + spin_unlock(&wdt->lock); +} + +/* disables watchdog timers reset */ +static void wdt_disable(void) +{ + spin_lock(&wdt->lock); + + writel(UNLOCK, wdt->base + WDTLOCK); + writel(0, wdt->base + WDTCONTROL); + writel(0, wdt->base + WDTLOAD); + writel(LOCK, wdt->base + WDTLOCK); + + spin_unlock(&wdt->lock); +} + +static ssize_t sp805_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + clear_bit(WDT_CAN_BE_CLOSED, &wdt->status); + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + /* Check for Magic Close character */ + if (c == 'V') { + set_bit(WDT_CAN_BE_CLOSED, + &wdt->status); + break; + } + } + } + wdt_enable(); + } + return len; +} + +static const struct watchdog_info ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = MODULE_NAME, +}; + +static long sp805_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret = -ENOTTY; + unsigned int timeout; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ret = copy_to_user((struct watchdog_info *)arg, &ident, + sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + ret = put_user(0, (int *)arg); + break; + + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + + case WDIOC_SETTIMEOUT: + ret = get_user(timeout, (unsigned int *)arg); + if (ret) + break; + + wdt_setload(timeout); + + wdt_enable(); + /* Fall through */ + + case WDIOC_GETTIMEOUT: + ret = put_user(wdt->timeout, (unsigned int *)arg); + break; + case WDIOC_GETTIMELEFT: + ret = put_user(wdt_timeleft(), (unsigned int *)arg); + break; + } + return ret; +} + +static int sp805_wdt_open(struct inode *inode, struct file *file) +{ + int ret = 0; + + if (test_and_set_bit(WDT_BUSY, &wdt->status)) + return -EBUSY; + + ret = clk_enable(wdt->clk); + if (ret) { + dev_err(&wdt->adev->dev, "clock enable fail"); + goto err; + } + + wdt_enable(); + + /* can not be closed, once enabled */ + clear_bit(WDT_CAN_BE_CLOSED, &wdt->status); + return nonseekable_open(inode, file); + +err: + clear_bit(WDT_BUSY, &wdt->status); + return ret; +} + +static int sp805_wdt_release(struct inode *inode, struct file *file) +{ + if (!test_bit(WDT_CAN_BE_CLOSED, &wdt->status)) { + clear_bit(WDT_BUSY, &wdt->status); + dev_warn(&wdt->adev->dev, "Device closed unexpectedly\n"); + return 0; + } + + wdt_disable(); + clk_disable(wdt->clk); + clear_bit(WDT_BUSY, &wdt->status); + + return 0; +} + +static const struct file_operations sp805_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = sp805_wdt_write, + .unlocked_ioctl = sp805_wdt_ioctl, + .open = sp805_wdt_open, + .release = sp805_wdt_release, +}; + +static struct miscdevice sp805_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &sp805_wdt_fops, +}; + +static int __devinit +sp805_wdt_probe(struct amba_device *adev, struct amba_id *id) +{ + int ret = 0; + + if (!request_mem_region(adev->res.start, resource_size(&adev->res), + "sp805_wdt")) { + dev_warn(&adev->dev, "Failed to get memory region resource\n"); + ret = -ENOENT; + goto err; + } + + wdt = kzalloc(sizeof(*wdt), GFP_KERNEL); + if (!wdt) { + dev_warn(&adev->dev, "Kzalloc failed\n"); + ret = -ENOMEM; + goto err_kzalloc; + } + + wdt->clk = clk_get(&adev->dev, NULL); + if (IS_ERR(wdt->clk)) { + dev_warn(&adev->dev, "Clock not found\n"); + ret = PTR_ERR(wdt->clk); + goto err_clk_get; + } + + wdt->base = ioremap(adev->res.start, resource_size(&adev->res)); + if (!wdt->base) { + ret = -ENOMEM; + dev_warn(&adev->dev, "ioremap fail\n"); + goto err_ioremap; + } + + wdt->adev = adev; + spin_lock_init(&wdt->lock); + wdt_setload(DEFAULT_TIMEOUT); + + ret = misc_register(&sp805_wdt_miscdev); + if (ret < 0) { + dev_warn(&adev->dev, "cannot register misc device\n"); + goto err_misc_register; + } + + dev_info(&adev->dev, "registration successful\n"); + return 0; + +err_misc_register: + iounmap(wdt->base); +err_ioremap: + clk_put(wdt->clk); +err_clk_get: + kfree(wdt); + wdt = NULL; +err_kzalloc: + release_mem_region(adev->res.start, resource_size(&adev->res)); +err: + dev_err(&adev->dev, "Probe Failed!!!\n"); + return ret; +} + +static int __devexit sp805_wdt_remove(struct amba_device *adev) +{ + misc_deregister(&sp805_wdt_miscdev); + iounmap(wdt->base); + clk_put(wdt->clk); + kfree(wdt); + release_mem_region(adev->res.start, resource_size(&adev->res)); + + return 0; +} + +static struct amba_id sp805_wdt_ids[] __initdata = { + { + .id = 0x00141805, + .mask = 0x00ffffff, + }, + { 0, 0 }, +}; + +static struct amba_driver sp805_wdt_driver = { + .drv = { + .name = MODULE_NAME, + }, + .id_table = sp805_wdt_ids, + .probe = sp805_wdt_probe, + .remove = __devexit_p(sp805_wdt_remove), +}; + +static int __init sp805_wdt_init(void) +{ + return amba_driver_register(&sp805_wdt_driver); +} +module_init(sp805_wdt_init); + +static void __exit sp805_wdt_exit(void) +{ + amba_driver_unregister(&sp805_wdt_driver); +} +module_exit(sp805_wdt_exit); + +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, + "Set to 1 to keep watchdog running after device release"); + +MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_DESCRIPTION("ARM SP805 Watchdog Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index 7b22e3c..6130c88 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -60,19 +60,6 @@ #define PFX "wdt_pci: " -/* - * Until Access I/O gets their application for a PCI vendor ID approved, - * I don't think that it's appropriate to move these constants into the - * regular pci_ids.h file. -- JPN 2000/01/18 - */ - -#ifndef PCI_VENDOR_ID_ACCESSIO -#define PCI_VENDOR_ID_ACCESSIO 0x494f -#endif -#ifndef PCI_DEVICE_ID_WDG_CSM -#define PCI_DEVICE_ID_WDG_CSM 0x22c0 -#endif - /* We can only use 1 card due to the /dev/watchdog restriction */ static int dev_count; @@ -743,7 +730,7 @@ static void __devexit wdtpci_remove_one(struct pci_dev *pdev) static struct pci_device_id wdtpci_pci_tbl[] = { { .vendor = PCI_VENDOR_ID_ACCESSIO, - .device = PCI_DEVICE_ID_WDG_CSM, + .device = PCI_DEVICE_ID_ACCESSIO_WDG_CSM, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, }, diff --git a/drivers/zorro/proc.c b/drivers/zorro/proc.c index 3c7046d..cafc504 100644 --- a/drivers/zorro/proc.c +++ b/drivers/zorro/proc.c @@ -22,8 +22,9 @@ static loff_t proc_bus_zorro_lseek(struct file *file, loff_t off, int whence) { loff_t new = -1; + struct inode *inode = file->f_path.dentry->d_inode; - lock_kernel(); + mutex_lock(&inode->i_mutex); switch (whence) { case 0: new = off; @@ -35,12 +36,12 @@ proc_bus_zorro_lseek(struct file *file, loff_t off, int whence) new = sizeof(struct ConfigDev) + off; break; } - if (new < 0 || new > sizeof(struct ConfigDev)) { - unlock_kernel(); - return -EINVAL; - } - unlock_kernel(); - return (file->f_pos = new); + if (new < 0 || new > sizeof(struct ConfigDev)) + new = -EINVAL; + else + file->f_pos = new; + mutex_unlock(&inode->i_mutex); + return new; } static ssize_t @@ -67,7 +68,7 @@ proc_bus_zorro_read(struct file *file, char __user *buf, size_t nbytes, loff_t * cd.cd_BoardAddr = (void *)zorro_resource_start(z); cd.cd_BoardSize = zorro_resource_len(z); - if (copy_to_user(buf, &cd, nbytes)) + if (copy_to_user(buf, (void *)&cd + pos, nbytes)) return -EFAULT; *ppos += nbytes; |
