diff options
Diffstat (limited to 'drivers')
35 files changed, 292 insertions, 516 deletions
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 110e523..bd1f5b6 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -248,7 +248,7 @@ static void icside_build_sglist(ide_drive_t *drive, struct request *rq) * MW1 80 50 50 150 C * MW2 70 25 25 120 C */ -static int icside_set_speed(ide_drive_t *drive, const u8 xfer_mode) +static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) { int cycle_time, use_dma_info = 0; @@ -273,7 +273,7 @@ static int icside_set_speed(ide_drive_t *drive, const u8 xfer_mode) cycle_time = 480; break; default: - return 1; + return; } /* @@ -287,8 +287,6 @@ static int icside_set_speed(ide_drive_t *drive, const u8 xfer_mode) printk("%s: %s selected (peak %dMB/s)\n", drive->name, ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data); - - return ide_config_drive_speed(drive, xfer_mode); } static void icside_dma_host_off(ide_drive_t *drive) @@ -433,7 +431,7 @@ static void icside_dma_init(ide_hwif_t *hwif) hwif->dmatable_cpu = NULL; hwif->dmatable_dma = 0; - hwif->speedproc = icside_set_speed; + hwif->set_dma_mode = icside_set_dma_mode; hwif->autodma = 1; hwif->ide_dma_check = icside_dma_check; diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 4bb42b3..2b4d2a0 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -716,11 +716,9 @@ static void cris_set_pio_mode(ide_drive_t *drive, const u8 pio) } cris_ide_set_speed(TYPE_PIO, setup, strobe, hold); - - (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); } -static int speed_cris_ide(ide_drive_t *drive, const u8 speed) +static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed) { int cyc = 0, dvs = 0, strobe = 0, hold = 0; @@ -759,8 +757,6 @@ static int speed_cris_ide(ide_drive_t *drive, const u8 speed) cris_ide_set_speed(TYPE_UDMA, cyc, dvs, 0); else cris_ide_set_speed(TYPE_DMA, 0, strobe, hold); - - return ide_config_drive_speed(drive, speed); } void __init @@ -791,7 +787,7 @@ init_e100_ide (void) hwif->mmio = 1; hwif->chipset = ide_etrax100; hwif->set_pio_mode = &cris_set_pio_mode; - hwif->speedproc = &speed_cris_ide; + hwif->set_dma_mode = &cris_set_dma_mode; hwif->ata_input_data = &cris_ide_input_data; hwif->ata_output_data = &cris_ide_output_data; hwif->atapi_input_bytes = &cris_atapi_input_bytes; diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 05781fa..b453211 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -774,7 +774,10 @@ int ide_tune_dma(ide_drive_t *drive) if (!speed) return 0; - if (drive->hwif->speedproc(drive, speed)) + if (drive->hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + return 0; + + if (ide_set_dma_mode(drive, speed)) return 0; return 1; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index e5fc2e5..f5e73e2 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -862,9 +862,6 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) return error; } -EXPORT_SYMBOL(ide_config_drive_speed); - - /* * This should get invoked any time we exit the driver to * wait for an interrupt response from a drive. handler() points diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index d97390c..0e2562f 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -349,7 +349,7 @@ void ide_set_pio(ide_drive_t *drive, u8 req_pio) drive->name, host_pio, req_pio, req_pio == 255 ? "(auto-tune)" : "", pio); - hwif->set_pio_mode(drive, pio); + (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio); } EXPORT_SYMBOL_GPL(ide_set_pio); @@ -378,39 +378,83 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) blk_queue_bounce_limit(drive->queue, addr); } +int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) +{ + ide_hwif_t *hwif = drive->hwif; + + if (hwif->set_pio_mode == NULL) + return -1; + + /* + * TODO: temporary hack for some legacy host drivers that didn't + * set transfer mode on the device in ->set_pio_mode method... + */ + if (hwif->set_dma_mode == NULL) { + hwif->set_pio_mode(drive, mode - XFER_PIO_0); + return 0; + } + + if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { + if (ide_config_drive_speed(drive, mode)) + return -1; + hwif->set_pio_mode(drive, mode - XFER_PIO_0); + return 0; + } else { + hwif->set_pio_mode(drive, mode - XFER_PIO_0); + return ide_config_drive_speed(drive, mode); + } +} + +int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) +{ + ide_hwif_t *hwif = drive->hwif; + + if (hwif->set_dma_mode == NULL) + return -1; + + if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { + if (ide_config_drive_speed(drive, mode)) + return -1; + hwif->set_dma_mode(drive, mode); + return 0; + } else { + hwif->set_dma_mode(drive, mode); + return ide_config_drive_speed(drive, mode); + } +} + +EXPORT_SYMBOL_GPL(ide_set_dma_mode); + /** * ide_set_xfer_rate - set transfer rate * @drive: drive to set - * @speed: speed to attempt to set + * @rate: speed to attempt to set * * General helper for setting the speed of an IDE device. This * function knows about user enforced limits from the configuration - * which speedproc() does not. High level drivers should never - * invoke speedproc() directly. + * which ->set_pio_mode/->set_dma_mode does not. */ - + int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { ide_hwif_t *hwif = drive->hwif; - if (hwif->speedproc == NULL) + if (hwif->set_dma_mode == NULL) return -1; rate = ide_rate_filter(drive, rate); - if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) { - if (hwif->set_pio_mode) - hwif->set_pio_mode(drive, rate - XFER_PIO_0); + if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) + return ide_set_pio_mode(drive, rate); - /* - * FIXME: this is incorrect to return zero here but - * since all users of ide_set_xfer_rate() ignore - * the return value it is not a problem currently - */ - return 0; - } + /* + * TODO: transfer modes 0x00-0x07 passed from the user-space are + * currently handled here which needs fixing (please note that such + * case could happen iff the transfer mode has already been set on + * the device by ide-proc.c::set_xfer_rate()). + */ - return hwif->speedproc(drive, rate); + return ide_set_dma_mode(drive, rate); } static void ide_dump_opcode(ide_drive_t *drive) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index a96a8b1..5c0e407 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -397,7 +397,7 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) #endif hwif->set_pio_mode = tmp_hwif->set_pio_mode; - hwif->speedproc = tmp_hwif->speedproc; + hwif->set_dma_mode = tmp_hwif->set_dma_mode; hwif->mdma_filter = tmp_hwif->mdma_filter; hwif->udma_filter = tmp_hwif->udma_filter; hwif->selectproc = tmp_hwif->selectproc; diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index c319f61..aebde49 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -101,14 +101,7 @@ void auide_outsw(unsigned long port, void *addr, u32 count) static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio) { - int mem_sttime; - int mem_stcfg; - - if (ide_config_drive_speed(drive, pio + XFER_PIO_0)) - return; - - mem_sttime = 0; - mem_stcfg = au_readl(MEM_STCFG2); + int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); /* set pio mode! */ switch(pio) { @@ -168,13 +161,9 @@ static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio) au_writel(mem_stcfg,MEM_STCFG2); } -static int auide_tune_chipset(ide_drive_t *drive, const u8 speed) +static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed) { - int mem_sttime; - int mem_stcfg; - - mem_sttime = 0; - mem_stcfg = au_readl(MEM_STCFG2); + int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); switch(speed) { #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA @@ -210,16 +199,11 @@ static int auide_tune_chipset(ide_drive_t *drive, const u8 speed) break; #endif default: - return 1; + return; } - if (ide_config_drive_speed(drive, speed)) - return 1; - au_writel(mem_sttime,MEM_STTIME2); au_writel(mem_stcfg,MEM_STCFG2); - - return 0; } /* @@ -681,6 +665,7 @@ static int au_ide_probe(struct device *dev) #endif hwif->pio_mask = ATA_PIO4; + hwif->host_flags = IDE_HFLAG_POST_SET_MODE; hwif->noprobe = 0; hwif->drives[0].unmask = 1; @@ -701,7 +686,7 @@ static int au_ide_probe(struct device *dev) #endif hwif->set_pio_mode = &au1xxx_set_pio_mode; - hwif->speedproc = &auide_tune_chipset; + hwif->set_dma_mode = &auide_set_dma_mode; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA hwif->dma_off_quietly = &auide_dma_off_quietly; diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 0d5f62c..d6cb2d5 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -87,7 +87,7 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr return chipset_table->ultra_settings; } -static int aec6210_tune_chipset(ide_drive_t *drive, const u8 speed) +static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -111,10 +111,9 @@ static int aec6210_tune_chipset(ide_drive_t *drive, const u8 speed) tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn)))); pci_write_config_byte(dev, 0x54, tmp2); local_irq_restore(flags); - return(ide_config_drive_speed(drive, speed)); } -static int aec6260_tune_chipset(ide_drive_t *drive, const u8 speed) +static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -135,12 +134,11 @@ static int aec6260_tune_chipset(ide_drive_t *drive, const u8 speed) tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit)))); pci_write_config_byte(dev, (0x44|hwif->channel), tmp2); local_irq_restore(flags); - return(ide_config_drive_speed(drive, speed)); } static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) { - (void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0); + drive->hwif->set_dma_mode(drive, pio + XFER_PIO_0); } static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive) @@ -205,9 +203,9 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { if(hwif->mate) hwif->mate->serialized = hwif->serialized = 1; - hwif->speedproc = &aec6210_tune_chipset; + hwif->set_dma_mode = &aec6210_set_mode; } else - hwif->speedproc = &aec6260_tune_chipset; + hwif->set_dma_mode = &aec6260_set_mode; if (!hwif->dma_base) { hwif->drives[0].autotune = hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index d04b966..88f084e 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -283,14 +283,14 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count) #endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */ /** - * ali_tune_pio - set host controller for PIO mode + * ali_set_pio_mode - set host controller for PIO mode * @drive: drive * @pio: PIO mode number * * Program the controller for the given PIO mode. */ -static void ali_tune_pio(ide_drive_t *drive, const u8 pio) +static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -358,21 +358,6 @@ static void ali_tune_pio(ide_drive_t *drive, const u8 pio) } /** - * ali_set_pio_mode - set up drive for PIO mode - * @drive: drive to tune - * @pio: desired mode - * - * Program the controller with the desired PIO timing for the given drive. - * Then set up the drive itself. - */ - -static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ali_tune_pio(drive, pio); - (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); -} - -/** * ali_udma_filter - compute UDMA mask * @drive: IDE device * @@ -401,15 +386,14 @@ static u8 ali_udma_filter(ide_drive_t *drive) } /** - * ali15x3_tune_chipset - set up chipset/drive for new speed - * @drive: drive to configure for - * @speed: desired speed + * ali_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @speed: DMA mode * * Configure the hardware for the desired IDE transfer mode. - * We also do the needed drive configuration through helpers */ -static int ali15x3_tune_chipset(ide_drive_t *drive, const u8 speed) +static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -419,7 +403,7 @@ static int ali15x3_tune_chipset(ide_drive_t *drive, const u8 speed) int m5229_udma = (hwif->channel) ? 0x57 : 0x56; if (speed < XFER_PIO_0) - return 1; + return; if (speed == XFER_UDMA_6) speed1 = 0x47; @@ -450,7 +434,6 @@ static int ali15x3_tune_chipset(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x4b, tmpbyte); } } - return (ide_config_drive_speed(drive, speed)); } /** @@ -699,7 +682,7 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) { hwif->autodma = 0; hwif->set_pio_mode = &ali_set_pio_mode; - hwif->speedproc = &ali15x3_tune_chipset; + hwif->set_dma_mode = &ali_set_dma_mode; hwif->udma_filter = &ali_udma_filter; /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 71d2c67..6ff4089 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -229,20 +229,16 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi } /* - * amd_set_drive() computes timing values configures the drive and - * the chipset to a desired transfer mode. It also can be called - * by upper layers. + * amd_set_drive() computes timing values and configures the chipset + * to a desired transfer mode. It also can be called by upper layers. */ -static int amd_set_drive(ide_drive_t *drive, const u8 speed) +static void amd_set_drive(ide_drive_t *drive, const u8 speed) { ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); struct ide_timing t, p; int T, UT; - if (ide_config_drive_speed(drive, speed)) - return 1; - T = 1000000000 / amd_clock; UT = (amd_config->udma_mask == ATA_UDMA2) ? T : (T / 2); @@ -257,8 +253,6 @@ static int amd_set_drive(ide_drive_t *drive, const u8 speed) if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15; amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t); - - return 0; } /* @@ -395,7 +389,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) hwif->autodma = 0; hwif->set_pio_mode = &amd_set_pio_mode; - hwif->speedproc = &amd_set_drive; + hwif->set_dma_mode = &amd_set_drive; for (i = 0; i < 2; i++) { hwif->drives[i].io_32bit = 1; @@ -437,7 +431,8 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \ .bootable = ON_BOARD, \ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST \ - | IDE_HFLAG_PIO_NO_DOWNGRADE, \ + | IDE_HFLAG_PIO_NO_DOWNGRADE \ + | IDE_HFLAG_POST_SET_MODE, \ .pio_mask = ATA_PIO5, \ } @@ -450,7 +445,8 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \ .bootable = ON_BOARD, \ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST \ - | IDE_HFLAG_PIO_NO_DOWNGRADE, \ + | IDE_HFLAG_PIO_NO_DOWNGRADE \ + | IDE_HFLAG_POST_SET_MODE, \ .pio_mask = ATA_PIO5, \ } diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 178876a3..0eb97f0 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -122,14 +122,14 @@ static void atiixp_dma_host_off(ide_drive_t *drive) } /** - * atiixp_tune_pio - tune a drive attached to a ATIIXP - * @drive: drive to tune - * @pio: desired PIO mode + * atiixp_set_pio_mode - set host controller for PIO mode + * @drive: drive + * @pio: PIO mode number * * Set the interface PIO mode. */ -static void atiixp_tune_pio(ide_drive_t *drive, u8 pio) +static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) { struct pci_dev *dev = drive->hwif->pci_dev; unsigned long flags; @@ -153,23 +153,16 @@ static void atiixp_tune_pio(ide_drive_t *drive, u8 pio) spin_unlock_irqrestore(&atiixp_lock, flags); } -static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - atiixp_tune_pio(drive, pio); - (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); -} - /** - * atiixp_tune_chipset - tune a ATIIXP interface - * @drive: IDE drive to tune - * @speed: speed to configure + * atiixp_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @speed: DMA mode * - * Set a ATIIXP interface channel to the desired speeds. This involves - * requires the right timing data into the ATIIXP configuration space - * then setting the drive parameters appropriately + * Set a ATIIXP host controller to the desired DMA mode. This involves + * programming the right timing data into the PCI configuration space. */ -static int atiixp_speedproc(ide_drive_t *drive, const u8 speed) +static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) { struct pci_dev *dev = drive->hwif->pci_dev; unsigned long flags; @@ -204,9 +197,7 @@ static int atiixp_speedproc(ide_drive_t *drive, const u8 speed) else pio = speed - XFER_PIO_0; - atiixp_tune_pio(drive, pio); - - return ide_config_drive_speed(drive, speed); + atiixp_set_pio_mode(drive, pio); } /** @@ -249,7 +240,7 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) hwif->autodma = 0; hwif->set_pio_mode = &atiixp_set_pio_mode; - hwif->speedproc = &atiixp_speedproc; + hwif->set_dma_mode = &atiixp_set_dma_mode; hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 0b568c6..d50f15e 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -280,10 +280,9 @@ static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) return; cmd64x_tune_pio(drive, pio); - (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); } -static int cmd64x_tune_chipset(ide_drive_t *drive, const u8 speed) +static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -324,13 +323,11 @@ static int cmd64x_tune_chipset(ide_drive_t *drive, const u8 speed) program_cycle_times(drive, 480, 215); break; default: - return 1; + return; } if (speed >= XFER_SW_DMA_0) (void) pci_write_config_byte(dev, pciU, regU); - - return ide_config_drive_speed(drive, speed); } static int cmd64x_config_drive_for_dma (ide_drive_t *drive) @@ -524,7 +521,7 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) pci_read_config_byte(dev, PCI_REVISION_ID, &rev); hwif->set_pio_mode = &cmd64x_set_pio_mode; - hwif->speedproc = &cmd64x_tune_chipset; + hwif->set_dma_mode = &cmd64x_set_dma_mode; hwif->drives[0].autotune = hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 1217d2a..cb2a102 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -96,22 +96,13 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) reg = inb(hwif->dma_base + 0x02 + 8*controller); reg |= 1<<((drive->dn&1)+5); outb(reg, hwif->dma_base + 0x02 + 8*controller); - - (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); } -static int cs5520_tune_chipset(ide_drive_t *drive, const u8 speed) +static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) { printk(KERN_ERR "cs55x0: bad ide timing.\n"); cs5520_set_pio_mode(drive, 0); - - /* - * FIXME: this is incorrect to return zero here but - * since all users of ide_set_xfer_rate() ignore - * the return value it is not a problem currently - */ - return 0; } static int cs5520_config_drive_xfer_rate(ide_drive_t *drive) @@ -150,7 +141,7 @@ static int cs5520_dma_on(ide_drive_t *drive) static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) { hwif->set_pio_mode = &cs5520_set_pio_mode; - hwif->speedproc = &cs5520_tune_chipset; + hwif->set_dma_mode = &cs5520_set_dma_mode; hwif->ide_dma_check = &cs5520_config_drive_xfer_rate; hwif->ide_dma_on = &cs5520_dma_on; diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index 741507b..e412157 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -30,22 +30,6 @@ #include <asm/io.h> #include <asm/irq.h> -/** - * cs5530_xfer_set_mode - set a new transfer mode at the drive - * @drive: drive to tune - * @mode: new mode - * - * Logging wrapper to the IDE driver speed configuration. This can - * probably go away now. - */ - -static int cs5530_set_xfer_mode (ide_drive_t *drive, u8 mode) -{ - printk(KERN_DEBUG "%s: cs5530_set_xfer_mode(%s)\n", - drive->name, ide_xfer_verbose(mode)); - return (ide_config_drive_speed(drive, mode)); -} - /* * Here are the standard PIO mode 0-4 timings for each "format". * Format-0 uses fast data reg timings, with slower command reg timings. @@ -62,20 +46,12 @@ static unsigned int cs5530_pio_timings[2][5] = { #define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132) #define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20)) -static void cs5530_tunepio(ide_drive_t *drive, u8 pio) -{ - unsigned long basereg = CS5530_BASEREG(drive->hwif); - unsigned int format = (inl(basereg + 4) >> 31) & 1; - - outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); -} - /** - * cs5530_set_pio_mode - set PIO mode + * cs5530_set_pio_mode - set host controller for PIO mode * @drive: drive * @pio: PIO mode number * - * Handles setting of PIO mode for both the chipset and drive. + * Handles setting of PIO mode for the chipset. * * The init_hwif_cs5530() routine guarantees that all drives * will have valid default PIO timings set up before we get here. @@ -83,8 +59,10 @@ static void cs5530_tunepio(ide_drive_t *drive, u8 pio) static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio) { - if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0) - cs5530_tunepio(drive, pio); + unsigned long basereg = CS5530_BASEREG(drive->hwif); + unsigned int format = (inl(basereg + 4) >> 31) & 1; + + outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); } /** @@ -142,20 +120,11 @@ static int cs5530_config_dma(ide_drive_t *drive) return 1; } -static int cs5530_tune_chipset(ide_drive_t *drive, const u8 mode) +static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) { unsigned long basereg; unsigned int reg, timings = 0; - /* - * Tell the drive to switch to the new mode; abort on failure. - */ - if (cs5530_set_xfer_mode(drive, mode)) - return 1; /* failure */ - - /* - * Now tune the chipset to match the drive: - */ switch (mode) { case XFER_UDMA_0: timings = 0x00921250; break; case XFER_UDMA_1: timings = 0x00911140; break; @@ -180,8 +149,6 @@ static int cs5530_tune_chipset(ide_drive_t *drive, const u8 mode) outl(reg, basereg + 4); /* write drive0 config register */ outl(timings, basereg + 12); /* write drive1 config register */ } - - return 0; /* success */ } /** @@ -299,7 +266,7 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) hwif->serialized = hwif->mate->serialized = 1; hwif->set_pio_mode = &cs5530_set_pio_mode; - hwif->speedproc = &cs5530_tune_chipset; + hwif->set_dma_mode = &cs5530_set_dma_mode; basereg = CS5530_BASEREG(hwif); d0_timings = inl(basereg + 0); @@ -340,6 +307,7 @@ static ide_pci_device_t cs5530_chipset __devinitdata = { .autodma = AUTODMA, .bootable = ON_BOARD, .pio_mask = ATA_PIO4, + .host_flags = IDE_HFLAG_POST_SET_MODE, }; static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 5d1be65..da606ba 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -131,26 +131,21 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) } } -/**** - * cs5535_set_drive - Configure the drive to the new speed - * @drive: Drive to set up - * @speed: desired speed +/** + * cs5535_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @speed: DMA mode * - * cs5535_set_drive() configures the drive and the chipset to a - * new speed. It also can be called by upper layers. + * Programs the chipset for DMA mode. */ -static int cs5535_set_drive(ide_drive_t *drive, u8 speed) -{ - if (ide_config_drive_speed(drive, speed)) - return 1; +static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed) +{ cs5535_set_speed(drive, speed); - - return 0; } /** - * cs5535_set_pio_mode - PIO setup + * cs5535_set_pio_mode - set host controller for PIO mode * @drive: drive * @pio: PIO mode number * @@ -159,9 +154,6 @@ static int cs5535_set_drive(ide_drive_t *drive, u8 speed) static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio) { - if (ide_config_drive_speed(drive, XFER_PIO_0 + pio)) - return; - cs5535_set_speed(drive, XFER_PIO_0 + pio); } @@ -203,7 +195,7 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif) hwif->autodma = 0; hwif->set_pio_mode = &cs5535_set_pio_mode; - hwif->speedproc = &cs5535_set_drive; + hwif->set_dma_mode = &cs5535_set_dma_mode; hwif->ide_dma_check = &cs5535_dma_check; hwif->atapi_dma = 1; @@ -227,7 +219,7 @@ static ide_pci_device_t cs5535_chipset __devinitdata = { .init_hwif = init_hwif_cs5535, .autodma = AUTODMA, .bootable = ON_BOARD, - .host_flags = IDE_HFLAG_SINGLE, + .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE, .pio_mask = ATA_PIO4, }; diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index a1bb101..218852a 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c @@ -43,7 +43,7 @@ #define HPT343_DEBUG_DRIVE_INFO 0 -static int hpt34x_tune_chipset(ide_drive_t *drive, const u8 speed) +static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed) { struct pci_dev *dev = HWIF(drive)->pci_dev; u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0; @@ -73,13 +73,11 @@ static int hpt34x_tune_chipset(ide_drive_t *drive, const u8 speed) drive->dn, reg1, tmp1, reg2, tmp2, hi_speed, lo_speed); #endif /* HPT343_DEBUG_DRIVE_INFO */ - - return(ide_config_drive_speed(drive, speed)); } static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio) { - (void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio)); + hpt34x_set_mode(drive, XFER_PIO_0 + pio); } static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive) @@ -145,7 +143,8 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif) hwif->autodma = 0; hwif->set_pio_mode = &hpt34x_set_pio_mode; - hwif->speedproc = &hpt34x_tune_chipset; + hwif->set_dma_mode = &hpt34x_set_mode; + hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 0e7d3b6..8812a9b 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -600,7 +600,7 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info) return (*info->settings)[i]; } -static int hpt36x_tune_chipset(ide_drive_t *drive, const u8 speed) +static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -623,11 +623,9 @@ static int hpt36x_tune_chipset(ide_drive_t *drive, const u8 speed) new_itr &= ~0xc0000000; pci_write_config_dword(dev, itr_addr, new_itr); - - return ide_config_drive_speed(drive, speed); } -static int hpt37x_tune_chipset(ide_drive_t *drive, const u8 speed) +static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -647,24 +645,22 @@ static int hpt37x_tune_chipset(ide_drive_t *drive, const u8 speed) if (speed < XFER_MW_DMA_0) new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ pci_write_config_dword(dev, itr_addr, new_itr); - - return ide_config_drive_speed(drive, speed); } -static int hpt3xx_tune_chipset(ide_drive_t *drive, u8 speed) +static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct hpt_info *info = pci_get_drvdata(hwif->pci_dev); if (info->chip_type >= HPT370) - return hpt37x_tune_chipset(drive, speed); + hpt37x_set_mode(drive, speed); else /* hpt368: hpt_minimum_revision(dev, 2) */ - return hpt36x_tune_chipset(drive, speed); + hpt36x_set_mode(drive, speed); } static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio) { - (void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio); + hpt3xx_set_mode(drive, XFER_PIO_0 + pio); } static int hpt3xx_quirkproc(ide_drive_t *drive) @@ -1257,7 +1253,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->select_data = hwif->channel ? 0x54 : 0x50; hwif->set_pio_mode = &hpt3xx_set_pio_mode; - hwif->speedproc = &hpt3xx_tune_chipset; + hwif->set_dma_mode = &hpt3xx_set_mode; hwif->quirkproc = &hpt3xx_quirkproc; hwif->intrproc = &hpt3xx_intrproc; hwif->maskproc = &hpt3xx_maskproc; diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index 76e91ff..ecf4ce0 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -48,15 +48,15 @@ static u8 it8213_dma_2_pio (u8 xfer_rate) { } } -/* - * it8213_tune_pio - tune a drive - * @drive: drive to tune - * @pio: desired PIO mode +/** + * it8213_set_pio_mode - set host controller for PIO mode + * @drive: drive + * @pio: PIO mode number * * Set the interface PIO mode. */ -static void it8213_tune_pio(ide_drive_t *drive, const u8 pio) +static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -105,21 +105,15 @@ static void it8213_tune_pio(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&tune_lock, flags); } -static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - it8213_tune_pio(drive, pio); - ide_config_drive_speed(drive, XFER_PIO_0 + pio); -} - /** - * it8213_tune_chipset - set controller timings - * @drive: Drive to set up - * @speed: speed we want to achieve + * it8213_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @speed: DMA mode * - * Tune the ITE chipset for the desired mode. + * Tune the ITE chipset for the DMA mode. */ -static int it8213_tune_chipset(ide_drive_t *drive, const u8 speed) +static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -152,7 +146,7 @@ static int it8213_tune_chipset(ide_drive_t *drive, const u8 speed) case XFER_SW_DMA_2: break; default: - return -1; + return; } if (speed >= XFER_UDMA_0) { @@ -182,9 +176,7 @@ static int it8213_tune_chipset(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); } - it8213_tune_pio(drive, it8213_dma_2_pio(speed)); - - return ide_config_drive_speed(drive, speed); + it8213_set_pio_mode(drive, it8213_dma_2_pio(speed)); } /** @@ -220,7 +212,7 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif) { u8 reg42h = 0; - hwif->speedproc = &it8213_tune_chipset; + hwif->set_dma_mode = &it8213_set_dma_mode; hwif->set_pio_mode = &it8213_set_pio_mode; hwif->autodma = 0; diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 758a982..1b69d82 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -229,24 +229,24 @@ static void it821x_clock_strategy(ide_drive_t *drive) } /** - * it821x_tunepio - tune a drive - * @drive: drive to tune - * @pio: the desired PIO mode + * it821x_set_pio_mode - set host controller for PIO mode + * @drive: drive + * @pio: PIO mode number * - * Try to tune the drive/host to the desired PIO mode taking into - * the consideration the maximum PIO mode supported by the other - * device on the cable. + * Tune the host to the desired PIO mode taking into the consideration + * the maximum PIO mode supported by the other device on the cable. */ -static int it821x_tunepio(ide_drive_t *drive, u8 set_pio) +static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = drive->hwif; struct it821x_dev *itdev = ide_get_hwifdata(hwif); int unit = drive->select.b.unit; ide_drive_t *pair = &hwif->drives[1 - unit]; + u8 set_pio = pio; /* Spec says 89 ref driver uses 88 */ - static u16 pio[] = { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 }; + static u16 pio_timings[]= { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 }; static u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY }; /* @@ -261,22 +261,12 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio) set_pio = pair_pio; } - if (itdev->smart) - return 0; - /* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */ itdev->want[unit][1] = pio_want[set_pio]; itdev->want[unit][0] = 1; /* PIO is lowest priority */ - itdev->pio[unit] = pio[set_pio]; + itdev->pio[unit] = pio_timings[set_pio]; it821x_clock_strategy(drive); it821x_program(drive, itdev->pio[unit]); - - return ide_config_drive_speed(drive, XFER_PIO_0 + set_pio); -} - -static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - (void)it821x_tunepio(drive, pio); } /** @@ -405,47 +395,24 @@ static int it821x_dma_end(ide_drive_t *drive) } /** - * it821x_tune_chipset - set controller timings - * @drive: Drive to set up - * @speed: speed we want to achieve + * it821x_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @speed: DMA mode * - * Tune the ITE chipset for the desired mode. + * Tune the ITE chipset for the desired DMA mode. */ -static int it821x_tune_chipset(ide_drive_t *drive, const u8 speed) +static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) { - - ide_hwif_t *hwif = drive->hwif; - struct it821x_dev *itdev = ide_get_hwifdata(hwif); - - if (itdev->smart == 0) { - switch (speed) { - /* MWDMA tuning is really hard because our MWDMA and PIO - timings are kept in the same place. We can switch in the - host dma on/off callbacks */ - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_MW_DMA_0: - it821x_tune_mwdma(drive, (speed - XFER_MW_DMA_0)); - break; - case XFER_UDMA_6: - case XFER_UDMA_5: - case XFER_UDMA_4: - case XFER_UDMA_3: - case XFER_UDMA_2: - case XFER_UDMA_1: - case XFER_UDMA_0: - it821x_tune_udma(drive, (speed - XFER_UDMA_0)); - break; - default: - return 1; - } - - return ide_config_drive_speed(drive, speed); - } - - /* don't touch anything in the smart mode */ - return 0; + /* + * MWDMA tuning is really hard because our MWDMA and PIO + * timings are kept in the same place. We can switch in the + * host dma on/off callbacks. + */ + if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_6) + it821x_tune_udma(drive, speed - XFER_UDMA_0); + else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + it821x_tune_mwdma(drive, speed - XFER_MW_DMA_0); } /** @@ -629,14 +596,15 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) printk(KERN_WARNING "it821x: Revision 0x10, workarounds activated.\n"); } - hwif->speedproc = &it821x_tune_chipset; - hwif->set_pio_mode = &it821x_set_pio_mode; + if (idev->smart == 0) { + hwif->set_pio_mode = &it821x_set_pio_mode; + hwif->set_dma_mode = &it821x_set_dma_mode; - /* MWDMA/PIO clock switching for pass through mode */ - if(!idev->smart) { + /* MWDMA/PIO clock switching for pass through mode */ hwif->dma_start = &it821x_dma_start; hwif->ide_dma_end = &it821x_dma_end; - } + } else + hwif->host_flags |= IDE_HFLAG_NO_SET_MODE; hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index d379fba..582b4ca 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -85,21 +85,18 @@ static u8 __devinit ata66_jmicron(ide_hwif_t *hwif) static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio) { - ide_config_drive_speed(drive, XFER_PIO_0 + pio); } /** - * jmicron_tune_chipset - set controller timings - * @drive: Drive to set up - * @speed: speed we want to achieve + * jmicron_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @mode: DMA mode * - * As the JMicron snoops for timings all we actually need to do is - * set the transfer mode on the device. + * As the JMicron snoops for timings we don't need to do anything here. */ -static int jmicron_tune_chipset(ide_drive_t *drive, const u8 speed) +static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode) { - return ide_config_drive_speed(drive, speed); } /** @@ -129,8 +126,8 @@ static int jmicron_config_drive_for_dma (ide_drive_t *drive) static void __devinit init_hwif_jmicron(ide_hwif_t *hwif) { - hwif->speedproc = &jmicron_tune_chipset; hwif->set_pio_mode = &jmicron_set_pio_mode; + hwif->set_dma_mode = &jmicron_set_dma_mode; hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 9560068..ad0bdcb 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -146,19 +146,16 @@ static struct udma_timing { { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ }; -static int pdcnew_tune_chipset(ide_drive_t *drive, const u8 speed) +static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); u8 adj = (drive->dn & 1) ? 0x08 : 0x00; /* - * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will + * IDE core issues SETFEATURES_XFER to the drive first (thanks to + * IDE_HFLAG_POST_SET_MODE in ->host_flags). PDC202xx hardware will * automatically set the timing registers based on 100 MHz PLL output. - */ - if (ide_config_drive_speed(drive, speed)) - return 1; - - /* + * * As we set up the PLL to output 133 MHz for UltraDMA/133 capable * chips, we must override the default register settings... */ @@ -211,13 +208,11 @@ static int pdcnew_tune_chipset(ide_drive_t *drive, const u8 speed) set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f); } - - return 0; } static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) { - (void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio); + pdcnew_set_mode(drive, XFER_PIO_0 + pio); } static u8 pdcnew_cable_detect(ide_hwif_t *hwif) @@ -490,9 +485,9 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) hwif->autodma = 0; hwif->set_pio_mode = &pdcnew_set_pio_mode; + hwif->set_dma_mode = &pdcnew_set_mode; hwif->quirkproc = &pdcnew_quirkproc; - hwif->speedproc = &pdcnew_tune_chipset; hwif->resetproc = &pdcnew_reset; hwif->err_stops_fifo = 1; @@ -583,6 +578,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { .bootable = OFF_BOARD, .pio_mask = ATA_PIO4, .udma_mask = 0x3f, /* udma0-5 */ + .host_flags = IDE_HFLAG_POST_SET_MODE, },{ /* 1 */ .name = "PDC20269", .init_setup = init_setup_pdcnew, @@ -592,6 +588,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { .bootable = OFF_BOARD, .pio_mask = ATA_PIO4, .udma_mask = 0x7f, /* udma0-6*/ + .host_flags = IDE_HFLAG_POST_SET_MODE, },{ /* 2 */ .name = "PDC20270", .init_setup = init_setup_pdc20270, @@ -601,6 +598,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { .bootable = OFF_BOARD, .pio_mask = ATA_PIO4, .udma_mask = 0x3f, /* udma0-5 */ + .host_flags = IDE_HFLAG_POST_SET_MODE, },{ /* 3 */ .name = "PDC20271", .init_setup = init_setup_pdcnew, @@ -610,6 +608,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { .bootable = OFF_BOARD, .pio_mask = ATA_PIO4, .udma_mask = 0x7f, /* udma0-6*/ + .host_flags = IDE_HFLAG_POST_SET_MODE, },{ /* 4 */ .name = "PDC20275", .init_setup = init_setup_pdcnew, @@ -619,6 +618,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { .bootable = OFF_BOARD, .pio_mask = ATA_PIO4, .udma_mask = 0x7f, /* udma0-6*/ + .host_flags = IDE_HFLAG_POST_SET_MODE, },{ /* 5 */ .name = "PDC20276", .init_setup = init_setup_pdc20276, @@ -628,6 +628,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { .bootable = OFF_BOARD, .pio_mask = ATA_PIO4, .udma_mask = 0x7f, /* udma0-6*/ + .host_flags = IDE_HFLAG_POST_SET_MODE, },{ /* 6 */ .name = "PDC20277", .init_setup = init_setup_pdcnew, @@ -637,6 +638,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { .bootable = OFF_BOARD, .pio_mask = ATA_PIO4, .udma_mask = 0x7f, /* udma0-6*/ + .host_flags = IDE_HFLAG_POST_SET_MODE, } }; diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index b578307..8c3e8cf 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -63,7 +63,7 @@ static const char *pdc_quirk_drives[] = { static void pdc_old_disable_66MHz_clock(ide_hwif_t *); -static int pdc202xx_tune_chipset(ide_drive_t *drive, const u8 speed) +static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -138,13 +138,11 @@ static int pdc202xx_tune_chipset(ide_drive_t *drive, const u8 speed) pci_read_config_dword(dev, drive_pci, &drive_conf); printk("0x%08x\n", drive_conf); #endif - - return ide_config_drive_speed(drive, speed); } static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio); + pdc202xx_set_mode(drive, XFER_PIO_0 + pio); } static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif) @@ -330,14 +328,13 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) hwif->autodma = 0; hwif->set_pio_mode = &pdc202xx_set_pio_mode; + hwif->set_dma_mode = &pdc202xx_set_mode; hwif->quirkproc = &pdc202xx_quirkproc; if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246) hwif->resetproc = &pdc202xx_reset; - hwif->speedproc = &pdc202xx_tune_chipset; - hwif->err_stops_fifo = 1; hwif->drives[0].autotune = hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index fd8214a..38c91ba6 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -137,13 +137,14 @@ static u8 piix_dma_2_pio (u8 xfer_rate) { } /** - * piix_tune_pio - tune PIIX for PIO mode - * @drive: drive to tune - * @pio: desired PIO mode + * piix_set_pio_mode - set host controller for PIO mode + * @drive: drive + * @pio: PIO mode number * * Set the interface PIO mode based upon the settings done by AMI BIOS. */ -static void piix_tune_pio (ide_drive_t *drive, u8 pio) + +static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -204,31 +205,15 @@ static void piix_tune_pio (ide_drive_t *drive, u8 pio) } /** - * piix_set_pio_mode - set PIO mode - * @drive: drive to tune - * @pio: desired PIO mode - * - * Set the drive's PIO mode (might be useful if drive is not registered - * in CMOS for any reason). - */ - -static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - piix_tune_pio(drive, pio); - (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); -} - -/** - * piix_tune_chipset - tune a PIIX interface - * @drive: IDE drive to tune - * @speed: speed to configure + * piix_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @speed: DMA mode * - * Set a PIIX interface channel to the desired speeds. This involves - * requires the right timing data into the PIIX configuration space - * then setting the drive parameters appropriately + * Set a PIIX host controller to the desired DMA mode. This involves + * programming the right timing data into the PCI configuration space. */ -static int piix_tune_chipset(ide_drive_t *drive, const u8 speed) +static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -259,7 +244,7 @@ static int piix_tune_chipset(ide_drive_t *drive, const u8 speed) case XFER_MW_DMA_2: case XFER_MW_DMA_1: case XFER_SW_DMA_2: break; - default: return -1; + default: return; } if (speed >= XFER_UDMA_0) { @@ -288,9 +273,7 @@ static int piix_tune_chipset(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); } - piix_tune_pio(drive, piix_dma_2_pio(speed)); - - return ide_config_drive_speed(drive, speed); + piix_set_pio_mode(drive, piix_dma_2_pio(speed)); } /** @@ -448,7 +431,8 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) hwif->autodma = 0; hwif->set_pio_mode = &piix_set_pio_mode; - hwif->speedproc = &piix_tune_chipset; + hwif->set_dma_mode = &piix_set_dma_mode; + hwif->drives[0].autotune = 1; hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index 79ecab6..76f0868 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -68,17 +68,6 @@ static unsigned short sc1200_get_pci_clock (void) return pci_clock; } -extern char *ide_xfer_verbose (byte xfer_rate); - -/* - * Set a new transfer mode at the drive - */ -static int sc1200_set_xfer_mode (ide_drive_t *drive, byte mode) -{ - printk("%s: sc1200_set_xfer_mode(%s)\n", drive->name, ide_xfer_verbose(mode)); - return ide_config_drive_speed(drive, mode); -} - /* * Here are the standard PIO mode 0-4 timings for each "format". * Format-0 uses fast data reg timings, with slower command reg timings. @@ -138,7 +127,7 @@ out: return mask; } -static int sc1200_tune_chipset(ide_drive_t *drive, const u8 mode) +static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) { ide_hwif_t *hwif = HWIF(drive); int unit = drive->select.b.unit; @@ -146,17 +135,9 @@ static int sc1200_tune_chipset(ide_drive_t *drive, const u8 mode) unsigned short pci_clock; unsigned int basereg = hwif->channel ? 0x50 : 0x40; - /* - * Tell the drive to switch to the new mode; abort on failure. - */ - if (sc1200_set_xfer_mode(drive, mode)) - return 1; /* failure */ - pci_clock = sc1200_get_pci_clock(); /* - * Now tune the chipset to match the drive: - * * Note that each DMA mode has several timings associated with it. * The correct timing depends on the fast PCI clock freq. */ @@ -216,8 +197,6 @@ static int sc1200_tune_chipset(ide_drive_t *drive, const u8 mode) } else { pci_write_config_dword(hwif->pci_dev, basereg+12, timings); } - - return 0; /* success */ } /* @@ -286,13 +265,12 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) if (mode != -1) { printk("SC1200: %s: changing (U)DMA mode\n", drive->name); hwif->dma_off_quietly(drive); - if (sc1200_tune_chipset(drive, mode) == 0) + if (ide_set_dma_mode(drive, mode) == 0) hwif->dma_host_on(drive); return; } - if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0) - sc1200_tunepio(drive, pio); + sc1200_tunepio(drive, pio); } #ifdef CONFIG_PM @@ -408,7 +386,7 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif) hwif->autodma = 1; hwif->set_pio_mode = &sc1200_set_pio_mode; - hwif->speedproc = &sc1200_tune_chipset; + hwif->set_dma_mode = &sc1200_set_dma_mode; } hwif->atapi_dma = 1; hwif->ultra_mask = 0x07; @@ -423,7 +401,7 @@ static ide_pci_device_t sc1200_chipset __devinitdata = { .init_hwif = init_hwif_sc1200, .autodma = AUTODMA, .bootable = ON_BOARD, - .host_flags = IDE_HFLAG_ABUSE_DMA_MODES, + .host_flags = IDE_HFLAG_ABUSE_DMA_MODES | IDE_HFLAG_POST_SET_MODE, .pio_mask = ATA_PIO4, }; diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 66a526e..67f06dd 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -190,15 +190,15 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count) } /** - * scc_tune_pio - tune a drive PIO mode - * @drive: drive to tune - * @mode_wanted: the target operating mode + * scc_set_pio_mode - set host controller for PIO mode + * @drive: drive + * @pio: PIO mode number * * Load the timing settings for this device mode into the * controller. */ -static void scc_tune_pio(ide_drive_t *drive, const u8 pio) +static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct scc_ports *ports = ide_get_hwifdata(hwif); @@ -221,22 +221,16 @@ static void scc_tune_pio(ide_drive_t *drive, const u8 pio) out_be32((void __iomem *)pioct_port, reg); } -static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - scc_tune_pio(drive, pio); - ide_config_drive_speed(drive, XFER_PIO_0 + pio); -} - /** - * scc_tune_chipset - tune a drive DMA mode - * @drive: Drive to set up - * @speed: speed we want to achieve + * scc_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @speed: DMA mode * * Load the timing settings for this device mode into the * controller. */ -static int scc_tune_chipset(ide_drive_t *drive, const u8 speed) +static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct scc_ports *ports = ide_get_hwifdata(hwif); @@ -271,7 +265,7 @@ static int scc_tune_chipset(ide_drive_t *drive, const u8 speed) idx = speed - XFER_UDMA_0; break; default: - return 1; + return; } jcactsel = JCACTSELtbl[offset][idx]; @@ -287,8 +281,6 @@ static int scc_tune_chipset(ide_drive_t *drive, const u8 speed) } reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]; out_be32((void __iomem *)udenvt_port, reg); - - return ide_config_drive_speed(drive, speed); } /** @@ -708,8 +700,8 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) hwif->dma_setup = scc_dma_setup; hwif->ide_dma_end = scc_ide_dma_end; - hwif->speedproc = scc_tune_chipset; hwif->set_pio_mode = scc_set_pio_mode; + hwif->set_dma_mode = scc_set_dma_mode; hwif->ide_dma_check = scc_config_drive_for_dma; hwif->ide_dma_test_irq = scc_dma_test_irq; hwif->udma_filter = scc_udma_filter; diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index 0351cf2..49ec0ac 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -124,7 +124,7 @@ static u8 svwks_csb_check (struct pci_dev *dev) return 0; } -static void svwks_tune_pio(ide_drive_t *drive, const u8 pio) +static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio) { static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 }; @@ -145,7 +145,7 @@ static void svwks_tune_pio(ide_drive_t *drive, const u8 pio) } } -static int svwks_tune_chipset(ide_drive_t *drive, const u8 speed) +static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) { static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 }; static const u8 dma_modes[] = { 0x77, 0x21, 0x20 }; @@ -193,14 +193,6 @@ static int svwks_tune_chipset(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing); pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing); pci_write_config_byte(dev, 0x54, ultra_enable); - - return (ide_config_drive_speed(drive, speed)); -} - -static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - svwks_tune_pio(drive, pio); - (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); } static int svwks_config_drive_xfer_rate (ide_drive_t *drive) @@ -384,7 +376,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif) hwif->irq = hwif->channel ? 15 : 14; hwif->set_pio_mode = &svwks_set_pio_mode; - hwif->speedproc = &svwks_tune_chipset; + hwif->set_dma_mode = &svwks_set_dma_mode; hwif->udma_filter = &svwks_udma_filter; hwif->atapi_dma = 1; diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index c292e1d..2635262 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -291,12 +291,8 @@ static void sgiioc4_dma_off_quietly(ide_drive_t *drive) drive->hwif->dma_host_off(drive); } -static int sgiioc4_speedproc(ide_drive_t *drive, const u8 speed) +static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed) { - if (speed != XFER_MW_DMA_2) - return 1; - - return ide_config_drive_speed(drive, speed); } static int sgiioc4_ide_dma_check(ide_drive_t *drive) @@ -595,7 +591,7 @@ ide_init_sgiioc4(ide_hwif_t * hwif) hwif->mwdma_mask = 0x04; hwif->pio_mask = 0x00; hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */ - hwif->speedproc = &sgiioc4_speedproc; + hwif->set_dma_mode = &sgiioc4_set_dma_mode; hwif->selectproc = NULL;/* Use the default routine to select drive */ hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */ hwif->pre_reset = NULL; /* No HBA specific pre_set needed */ diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 5d1e5e5..ce77849 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -165,16 +165,16 @@ out: } /** - * sil_tune_pio - tune a drive - * @drive: drive to tune - * @pio: the desired PIO mode + * sil_set_pio_mode - set host controller for PIO mode + * @drive: drive + * @pio: PIO mode number * * Load the timing settings for this device mode into the * controller. If we are in PIO mode 3 or 4 turn on IORDY * monitoring (bit 9). The TF timing is bits 31:16 */ -static void sil_tune_pio(ide_drive_t *drive, u8 pio) +static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) { const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; @@ -234,21 +234,15 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio) } } -static void sil_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - sil_tune_pio(drive, pio); - (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); -} - /** - * siimage_tune_chipset - set controller timings - * @drive: Drive to set up - * @speed: speed we want to achieve + * sil_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @speed: DMA mode * - * Tune the SII chipset for the desired mode. + * Tune the SiI chipset for the desired DMA mode. */ -static int siimage_tune_chipset(ide_drive_t *drive, const u8 speed) +static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) { u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; @@ -303,7 +297,7 @@ static int siimage_tune_chipset(ide_drive_t *drive, const u8 speed) mode |= ((unit) ? 0x30 : 0x03); break; default: - return 1; + return; } if (hwif->mmio) { @@ -315,7 +309,6 @@ static int siimage_tune_chipset(ide_drive_t *drive, const u8 speed) pci_write_config_word(hwif->pci_dev, ma, multi); pci_write_config_word(hwif->pci_dev, ua, ultra); } - return (ide_config_drive_speed(drive, speed)); } /** @@ -904,8 +897,8 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) hwif->autodma = 0; hwif->resetproc = &siimage_reset; - hwif->speedproc = &siimage_tune_chipset; hwif->set_pio_mode = &sil_set_pio_mode; + hwif->set_dma_mode = &sil_set_dma_mode; hwif->reset_poll = &siimage_reset_poll; hwif->pre_reset = &siimage_pre_reset; hwif->udma_filter = &sil_udma_filter; diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 3e18899..b375ee5 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -451,7 +451,7 @@ static void config_drive_art_rwp (ide_drive_t *drive) } /* Set per-drive active and recovery time */ -static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) +static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -519,20 +519,14 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) } } -static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - config_art_rwp_pio(drive, pio); - (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio); -} - -static int sis5513_tune_chipset(ide_drive_t *drive, const u8 speed) +static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; u32 regdw; u8 drive_pci, reg; - /* See config_art_rwp_pio for drive pci config registers */ + /* See sis_set_pio_mode() for drive PCI config registers */ drive_pci = 0x40; if (chipset_family >= ATA_133) { u32 reg54h; @@ -600,8 +594,6 @@ static int sis5513_tune_chipset(ide_drive_t *drive, const u8 speed) BUG(); break; } - - return ide_config_drive_speed(drive, speed); } static int sis5513_config_xfer_rate(ide_drive_t *drive) @@ -841,7 +833,7 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) hwif->irq = hwif->channel ? 15 : 14; hwif->set_pio_mode = &sis_set_pio_mode; - hwif->speedproc = &sis5513_tune_chipset; + hwif->set_dma_mode = &sis_set_dma_mode; if (chipset_family >= ATA_133) hwif->udma_filter = sis5513_ata133_udma_filter; diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index f492318..2ef26e3 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -75,7 +75,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) /* * Configure the chipset for PIO mode. */ -static void sl82c105_tune_pio(ide_drive_t *drive, const u8 pio) +static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) { struct pci_dev *dev = HWIF(drive)->pci_dev; int reg = 0x44 + drive->dn * 4; @@ -105,9 +105,9 @@ static void sl82c105_tune_pio(ide_drive_t *drive, const u8 pio) } /* - * Configure the drive and chipset for a new transfer speed. + * Configure the chipset for DMA mode. */ -static int sl82c105_tune_chipset(ide_drive_t *drive, const u8 speed) +static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) { static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200}; u16 drv_ctrl; @@ -140,10 +140,8 @@ static int sl82c105_tune_chipset(ide_drive_t *drive, const u8 speed) } break; default: - return -1; + return; } - - return ide_config_drive_speed(drive, speed); } /* @@ -306,17 +304,6 @@ static void sl82c105_resetproc(ide_drive_t *drive) pci_read_config_dword(dev, 0x40, &val); pci_set_drvdata(dev, (void *)val); } - -/* - * We only deal with PIO mode here - DMA mode 'using_dma' is not - * initialised at the point that this function is called. - */ -static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - sl82c105_tune_pio(drive, pio); - - (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); -} /* * Return the revision of the Winbond bridge @@ -383,7 +370,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); hwif->set_pio_mode = &sl82c105_set_pio_mode; - hwif->speedproc = &sl82c105_tune_chipset; + hwif->set_dma_mode = &sl82c105_set_dma_mode; hwif->selectproc = &sl82c105_selectproc; hwif->resetproc = &sl82c105_resetproc; diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index ae8e913..ebac87f 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -42,7 +42,7 @@ static u8 slc90e66_dma_2_pio (u8 xfer_rate) { } } -static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio) +static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -95,13 +95,7 @@ static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio) spin_unlock_irqrestore(&ide_lock, flags); } -static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - slc90e66_tune_pio(drive, pio); - (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); -} - -static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed) +static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -125,7 +119,7 @@ static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed) case XFER_MW_DMA_2: case XFER_MW_DMA_1: case XFER_SW_DMA_2: break; - default: return -1; + default: return; } if (speed >= XFER_UDMA_0) { @@ -144,9 +138,7 @@ static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed) pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); } - slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed)); - - return ide_config_drive_speed(drive, speed); + slc90e66_set_pio_mode(drive, slc90e66_dma_2_pio(speed)); } static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive) @@ -172,8 +164,8 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif) if (!hwif->irq) hwif->irq = hwif->channel ? 15 : 14; - hwif->speedproc = &slc90e66_tune_chipset; hwif->set_pio_mode = &slc90e66_set_pio_mode; + hwif->set_dma_mode = &slc90e66_set_dma_mode; pci_read_config_byte(hwif->pci_dev, 0x47, ®47); diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index e23b9cf..840415d 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c @@ -13,7 +13,7 @@ #include <linux/pci.h> #include <linux/ide.h> -static int tc86c001_tune_chipset(ide_drive_t *drive, const u8 speed) +static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); @@ -39,13 +39,11 @@ static int tc86c001_tune_chipset(ide_drive_t *drive, const u8 speed) scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f; scr |= mode; outw(scr, scr_port); - - return ide_config_drive_speed(drive, speed); } static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio) { - (void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio); + tc86c001_set_mode(drive, XFER_PIO_0 + pio); } /* @@ -193,7 +191,8 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) hwif->config_data = sc_base; hwif->set_pio_mode = &tc86c001_set_pio_mode; - hwif->speedproc = &tc86c001_tune_chipset; + hwif->set_dma_mode = &tc86c001_set_mode; + hwif->busproc = &tc86c001_busproc; hwif->drives[0].autotune = hwif->drives[1].autotune = 1; diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index c3ff066..54e411d 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c @@ -40,7 +40,7 @@ #include <linux/ide.h> #include <linux/init.h> -static int triflex_tune_chipset(ide_drive_t *drive, const u8 speed) +static void triflex_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -82,20 +82,18 @@ static int triflex_tune_chipset(ide_drive_t *drive, const u8 speed) timing = 0x0808; break; default: - return -1; + return; } triflex_timings &= ~(0xFFFF << (16 * unit)); triflex_timings |= (timing << (16 * unit)); pci_write_config_dword(dev, channel_offset, triflex_timings); - - return (ide_config_drive_speed(drive, speed)); } static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio) { - (void)triflex_tune_chipset(drive, XFER_PIO_0 + pio); + triflex_set_mode(drive, XFER_PIO_0 + pio); } static int triflex_config_drive_xfer_rate(ide_drive_t *drive) @@ -111,7 +109,7 @@ static int triflex_config_drive_xfer_rate(ide_drive_t *drive) static void __devinit init_hwif_triflex(ide_hwif_t *hwif) { hwif->set_pio_mode = &triflex_set_pio_mode; - hwif->speedproc = &triflex_tune_chipset; + hwif->set_dma_mode = &triflex_set_mode; if (hwif->dma_base == 0) return; diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index ac094e5..479e496 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -153,21 +153,17 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) * @drive: Drive to set up * @speed: desired speed * - * via_set_drive() computes timing values configures the drive and - * the chipset to a desired transfer mode. It also can be called - * by upper layers. + * via_set_drive() computes timing values configures the chipset to + * a desired transfer mode. It also can be called by upper layers. */ -static int via_set_drive(ide_drive_t *drive, const u8 speed) +static void via_set_drive(ide_drive_t *drive, const u8 speed) { ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev); struct ide_timing t, p; unsigned int T, UT; - if (ide_config_drive_speed(drive, speed)) - return 1; - T = 1000000000 / via_clock; switch (vdev->via_config->udma_mask) { @@ -186,12 +182,10 @@ static int via_set_drive(ide_drive_t *drive, const u8 speed) } via_set_speed(HWIF(drive), drive->dn, &t); - - return 0; } /** - * via_set_pio_mode - PIO setup + * via_set_pio_mode - set host controller for PIO mode * @drive: drive * @pio: PIO mode number * @@ -452,8 +446,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) hwif->autodma = 0; hwif->set_pio_mode = &via_set_pio_mode; - hwif->speedproc = &via_set_drive; - + hwif->set_dma_mode = &via_set_drive; #ifdef CONFIG_PPC_CHRP if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) { @@ -496,7 +489,8 @@ static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = { .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, .bootable = ON_BOARD, .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST - | IDE_HFLAG_PIO_NO_DOWNGRADE, + | IDE_HFLAG_PIO_NO_DOWNGRADE + | IDE_HFLAG_POST_SET_MODE, .pio_mask = ATA_PIO5, },{ /* 1 */ .name = "VP_IDE", @@ -506,7 +500,8 @@ static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = { .enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, .bootable = ON_BOARD, .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST - | IDE_HFLAG_PIO_NO_DOWNGRADE, + | IDE_HFLAG_PIO_NO_DOWNGRADE + | IDE_HFLAG_POST_SET_MODE, .pio_mask = ATA_PIO5, } }; diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 313194a..7d88738 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -611,9 +611,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) drive->name, pio, *timings); #endif - if (ide_config_drive_speed(drive, XFER_PIO_0 + pio)) - return; - *timings = t; pmac_ide_do_update_timings(drive); } @@ -822,11 +819,7 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, } #endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */ -/* - * Speedproc. This function is called by the core to set any of the standard - * DMA timing (MDMA or UDMA) to both the drive and the controller. - */ -static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed) +static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) { int unit = (drive->select.b.unit & 0x01); int ret = 0; @@ -867,25 +860,19 @@ static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed) case XFER_SW_DMA_2: case XFER_SW_DMA_1: case XFER_SW_DMA_0: - return 1; + return; #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ default: ret = 1; } if (ret) - return ret; - - ret = ide_config_drive_speed(drive, speed); - if (ret) - return ret; + return; /* Apply timings to controller */ *timings = tl[0]; *timings2 = tl[1]; pmac_ide_do_update_timings(drive); - - return 0; } /* @@ -1147,7 +1134,8 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->drives[1].unmask = 1; hwif->drives[0].autotune = IDE_TUNE_AUTO; hwif->drives[1].autotune = IDE_TUNE_AUTO; - hwif->host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA; + hwif->host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | + IDE_HFLAG_POST_SET_MODE; hwif->pio_mask = ATA_PIO4; hwif->set_pio_mode = pmac_ide_set_pio_mode; if (pmif->kind == controller_un_ata6 @@ -1156,7 +1144,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->selectproc = pmac_ide_kauai_selectproc; else hwif->selectproc = pmac_ide_selectproc; - hwif->speedproc = pmac_ide_tune_chipset; + hwif->set_dma_mode = pmac_ide_set_dma_mode; printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, |
