diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mtd/chips/cfi_cmdset_0001.c | 14 |
1 files changed, 11 insertions, 3 deletions
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index dbbd2ed..7751443 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -2043,7 +2043,7 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip { struct cfi_private *cfi = map->fldrv_priv; struct cfi_pri_intelext *extp = cfi->cmdset_priv; - int udelay; + int mdelay; int ret; adr += chip->start; @@ -2072,9 +2072,17 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip * If Instant Individual Block Locking supported then no need * to delay. */ - udelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1000000/HZ : 0; + /* + * Unlocking may take up to 1.4 seconds on some Intel flashes. So + * lets use a max of 1.5 seconds (1500ms) as timeout. + * + * See "Clear Block Lock-Bits Time" on page 40 in + * "3 Volt Intel StrataFlash Memory" 28F128J3,28F640J3,28F320J3 manual + * from February 2003 + */ + mdelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1500 : 0; - ret = WAIT_TIMEOUT(map, chip, adr, udelay, udelay * 100); + ret = WAIT_TIMEOUT(map, chip, adr, mdelay, mdelay * 1000); if (ret) { map_write(map, CMD(0x70), adr); chip->state = FL_STATUS; |
