diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/pci/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pci/host/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/pci/host/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pci/host/pci-dra7xx.c | 11 | ||||
| -rw-r--r-- | drivers/pci/host/pci-exynos.c | 13 | ||||
| -rw-r--r-- | drivers/pci/host/pci-imx6.c | 33 | ||||
| -rw-r--r-- | drivers/pci/host/pci-keystone.c | 10 | ||||
| -rw-r--r-- | drivers/pci/host/pcie-designware-plat.c | 138 | ||||
| -rw-r--r-- | drivers/pci/host/pcie-designware.c | 29 | ||||
| -rw-r--r-- | drivers/pci/host/pcie-designware.h | 6 | ||||
| -rw-r--r-- | drivers/pci/host/pcie-qcom.c | 12 | ||||
| -rw-r--r-- | drivers/pci/host/pcie-spear13xx.c | 14 |
12 files changed, 203 insertions, 77 deletions
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index be3f631..2154092 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o # Some architectures use the generic PCI setup functions # obj-$(CONFIG_ALPHA) += setup-irq.o +obj-$(CONFIG_ARC) += setup-irq.o obj-$(CONFIG_ARM) += setup-irq.o obj-$(CONFIG_ARM64) += setup-irq.o obj-$(CONFIG_UNICORE32) += setup-irq.o diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 4f8e951..391623e 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -16,6 +16,7 @@ config PCI_MVEBU depends on ARCH_MVEBU || ARCH_DOVE depends on OF + config PCIE_XILINX_NWL bool "NWL PCIe Core" depends on ARCH_ZYNQMP @@ -26,6 +27,17 @@ config PCIE_XILINX_NWL or End Point. The current option selection will only support root port enabling. +config PCIE_DW_PLAT + bool "Platform bus based DesignWare PCIe Controller" + select PCIE_DW + ---help--- + This selects the DesignWare PCIe controller support. Select this if + you have a PCIe controller on Platform bus. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config PCIE_DW bool diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 2c7efd8..3ccd743 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o +obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o obj-$(CONFIG_PCI_IMX6) += pci-imx6.o diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c index 923607b..2ca3a1f 100644 --- a/drivers/pci/host/pci-dra7xx.c +++ b/drivers/pci/host/pci-dra7xx.c @@ -10,7 +10,6 @@ * published by the Free Software Foundation. */ -#include <linux/delay.h> #include <linux/err.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -108,7 +107,6 @@ static int dra7xx_pcie_establish_link(struct pcie_port *pp) { struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp); u32 reg; - unsigned int retries; if (dw_pcie_link_up(pp)) { dev_err(pp->dev, "link is already up\n"); @@ -119,14 +117,7 @@ static int dra7xx_pcie_establish_link(struct pcie_port *pp) reg |= LTSSM_EN; dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg); - for (retries = 0; retries < 1000; retries++) { - if (dw_pcie_link_up(pp)) - return 0; - usleep_range(10, 20); - } - - dev_err(pp->dev, "link is not up\n"); - return -EINVAL; + return dw_pcie_wait_for_link(pp); } static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp) diff --git a/drivers/pci/host/pci-exynos.c b/drivers/pci/host/pci-exynos.c index d997d22..2199761 100644 --- a/drivers/pci/host/pci-exynos.c +++ b/drivers/pci/host/pci-exynos.c @@ -318,7 +318,6 @@ static int exynos_pcie_establish_link(struct pcie_port *pp) { struct exynos_pcie *exynos_pcie = to_exynos_pcie(pp); u32 val; - unsigned int retries; if (dw_pcie_link_up(pp)) { dev_err(pp->dev, "Link already up\n"); @@ -357,13 +356,8 @@ static int exynos_pcie_establish_link(struct pcie_port *pp) PCIE_APP_LTSSM_ENABLE); /* check if the link is up or not */ - for (retries = 0; retries < 10; retries++) { - if (dw_pcie_link_up(pp)) { - dev_info(pp->dev, "Link up\n"); - return 0; - } - mdelay(100); - } + if (!dw_pcie_wait_for_link(pp)) + return 0; while (exynos_phy_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED) == 0) { val = exynos_blk_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED); @@ -372,8 +366,7 @@ static int exynos_pcie_establish_link(struct pcie_port *pp) /* power off phy */ exynos_pcie_power_off_phy(pp); - dev_err(pp->dev, "PCIe Link Fail\n"); - return -EINVAL; + return -ETIMEDOUT; } static void exynos_pcie_clear_irq_pulse(struct pcie_port *pp) diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index 8c9b389..eb5a275 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -357,33 +357,14 @@ static void imx6_pcie_init_phy(struct pcie_port *pp) static int imx6_pcie_wait_for_link(struct pcie_port *pp) { - unsigned int retries; + /* check if the link is up or not */ + if (!dw_pcie_wait_for_link(pp)) + return 0; - /* - * Test if the PHY reports that the link is up and also that the LTSSM - * training finished. There are three possible states of the link when - * this code is called: - * 1) The link is DOWN (unlikely) - * The link didn't come up yet for some reason. This usually means - * we have a real problem somewhere, if it happens with a peripheral - * connected. This state calls for inspection of the DEBUG registers. - * 2) The link is UP, but still in LTSSM training - * Wait for the training to finish, which should take a very short - * time. If the training does not finish, we have a problem and we - * need to inspect the DEBUG registers. If the training does finish, - * the link is up and operating correctly. - * 3) The link is UP and no longer in LTSSM training - * The link is up and operating correctly. - */ - for (retries = 0; retries < 200; retries++) { - u32 reg = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1); - if ((reg & PCIE_PHY_DEBUG_R1_XMLH_LINK_UP) && - !(reg & PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING)) - return 0; - usleep_range(1000, 2000); - } - - return -EINVAL; + dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n", + readl(pp->dbi_base + PCIE_PHY_DEBUG_R0), + readl(pp->dbi_base + PCIE_PHY_DEBUG_R1)); + return -ETIMEDOUT; } static int imx6_pcie_wait_for_speed_change(struct pcie_port *pp) diff --git a/drivers/pci/host/pci-keystone.c b/drivers/pci/host/pci-keystone.c index cd70345..b71f55b 100644 --- a/drivers/pci/host/pci-keystone.c +++ b/drivers/pci/host/pci-keystone.c @@ -97,17 +97,15 @@ static int ks_pcie_establish_link(struct keystone_pcie *ks_pcie) return 0; } - ks_dw_pcie_initiate_link_train(ks_pcie); /* check if the link is up or not */ - for (retries = 0; retries < 200; retries++) { - if (dw_pcie_link_up(pp)) - return 0; - usleep_range(100, 1000); + for (retries = 0; retries < 5; retries++) { ks_dw_pcie_initiate_link_train(ks_pcie); + if (!dw_pcie_wait_for_link(pp)) + return 0; } dev_err(pp->dev, "phy link never came up\n"); - return -EINVAL; + return -ETIMEDOUT; } static void ks_pcie_msi_irq_handler(struct irq_desc *desc) diff --git a/drivers/pci/host/pcie-designware-plat.c b/drivers/pci/host/pcie-designware-plat.c new file mode 100644 index 0000000..b350099 --- /dev/null +++ b/drivers/pci/host/pcie-designware-plat.c @@ -0,0 +1,138 @@ +/* + * PCIe RC driver for Synopsys DesignWare Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto <jpinto@synopsys.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/resource.h> +#include <linux/signal.h> +#include <linux/types.h> + +#include "pcie-designware.h" + +struct dw_plat_pcie { + void __iomem *mem_base; + struct pcie_port pp; +}; + +static irqreturn_t dw_plat_pcie_msi_irq_handler(int irq, void *arg) +{ + struct pcie_port *pp = arg; + + return dw_handle_msi_irq(pp); +} + +static void dw_plat_pcie_host_init(struct pcie_port *pp) +{ + dw_pcie_setup_rc(pp); + dw_pcie_wait_for_link(pp); + + if (IS_ENABLED(CONFIG_PCI_MSI)) + dw_pcie_msi_init(pp); +} + +static struct pcie_host_ops dw_plat_pcie_host_ops = { + .host_init = dw_plat_pcie_host_init, +}; + +static int dw_plat_add_pcie_port(struct pcie_port *pp, + struct platform_device *pdev) +{ + int ret; + + pp->irq = platform_get_irq(pdev, 1); + if (pp->irq < 0) + return pp->irq; + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + pp->msi_irq = platform_get_irq(pdev, 0); + if (pp->msi_irq < 0) + return pp->msi_irq; + + ret = devm_request_irq(&pdev->dev, pp->msi_irq, + dw_plat_pcie_msi_irq_handler, + IRQF_SHARED, "dw-plat-pcie-msi", pp); + if (ret) { + dev_err(&pdev->dev, "failed to request MSI IRQ\n"); + return ret; + } + } + + pp->root_bus_nr = -1; + pp->ops = &dw_plat_pcie_host_ops; + + ret = dw_pcie_host_init(pp); + if (ret) { + dev_err(&pdev->dev, "failed to initialize host\n"); + return ret; + } + + return 0; +} + +static int dw_plat_pcie_probe(struct platform_device *pdev) +{ + struct dw_plat_pcie *dw_plat_pcie; + struct pcie_port *pp; + struct resource *res; /* Resource from DT */ + int ret; + + dw_plat_pcie = devm_kzalloc(&pdev->dev, sizeof(*dw_plat_pcie), + GFP_KERNEL); + if (!dw_plat_pcie) + return -ENOMEM; + + pp = &dw_plat_pcie->pp; + pp->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + dw_plat_pcie->mem_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dw_plat_pcie->mem_base)) + return PTR_ERR(dw_plat_pcie->mem_base); + + pp->dbi_base = dw_plat_pcie->mem_base; + + ret = dw_plat_add_pcie_port(pp, pdev); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, dw_plat_pcie); + return 0; +} + +static const struct of_device_id dw_plat_pcie_of_match[] = { + { .compatible = "snps,dw-pcie", }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_plat_pcie_of_match); + +static struct platform_driver dw_plat_pcie_driver = { + .driver = { + .name = "dw-pcie", + .of_match_table = dw_plat_pcie_of_match, + }, + .probe = dw_plat_pcie_probe, +}; + +module_platform_driver(dw_plat_pcie_driver); + +MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>"); +MODULE_DESCRIPTION("Synopsys PCIe host controller glue platform driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index f85f10d..a4cccd3 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -22,6 +22,7 @@ #include <linux/pci_regs.h> #include <linux/platform_device.h> #include <linux/types.h> +#include <linux/delay.h> #include "pcie-designware.h" @@ -69,6 +70,11 @@ #define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) #define PCIE_ATU_UPPER_TARGET 0x91C +/* PCIe Port Logic registers */ +#define PLR_OFFSET 0x700 +#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c) +#define PCIE_PHY_DEBUG_R1_LINK_UP 0x00000010 + static struct pci_ops dw_pcie_ops; int dw_pcie_cfg_read(void __iomem *addr, int size, u32 *val) @@ -380,12 +386,33 @@ static struct msi_controller dw_pcie_msi_chip = { .teardown_irq = dw_msi_teardown_irq, }; +int dw_pcie_wait_for_link(struct pcie_port *pp) +{ + int retries; + + /* check if the link is up or not */ + for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) { + if (dw_pcie_link_up(pp)) { + dev_info(pp->dev, "link up\n"); + return 0; + } + usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX); + } + + dev_err(pp->dev, "phy link never came up\n"); + + return -ETIMEDOUT; +} + int dw_pcie_link_up(struct pcie_port *pp) { + u32 val; + if (pp->ops->link_up) return pp->ops->link_up(pp); - return 0; + val = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1); + return val & PCIE_PHY_DEBUG_R1_LINK_UP; } static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq, diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h index 2356d29..f437f9b 100644 --- a/drivers/pci/host/pcie-designware.h +++ b/drivers/pci/host/pcie-designware.h @@ -22,6 +22,11 @@ #define MAX_MSI_IRQS 32 #define MAX_MSI_CTRLS (MAX_MSI_IRQS / 32) +/* Parameters for the waiting for link up routine */ +#define LINK_WAIT_MAX_RETRIES 10 +#define LINK_WAIT_USLEEP_MIN 90000 +#define LINK_WAIT_USLEEP_MAX 100000 + struct pcie_port { struct device *dev; u8 root_bus_nr; @@ -76,6 +81,7 @@ int dw_pcie_cfg_read(void __iomem *addr, int size, u32 *val); int dw_pcie_cfg_write(void __iomem *addr, int size, u32 val); irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); void dw_pcie_msi_init(struct pcie_port *pp); +int dw_pcie_wait_for_link(struct pcie_port *pp); int dw_pcie_link_up(struct pcie_port *pp); void dw_pcie_setup_rc(struct pcie_port *pp); int dw_pcie_host_init(struct pcie_port *pp); diff --git a/drivers/pci/host/pcie-qcom.c b/drivers/pci/host/pcie-qcom.c index e845fba..f2f90c5 100644 --- a/drivers/pci/host/pcie-qcom.c +++ b/drivers/pci/host/pcie-qcom.c @@ -116,8 +116,6 @@ static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg) static int qcom_pcie_establish_link(struct qcom_pcie *pcie) { - struct device *dev = pcie->dev; - unsigned int retries = 0; u32 val; if (dw_pcie_link_up(&pcie->pp)) @@ -128,15 +126,7 @@ static int qcom_pcie_establish_link(struct qcom_pcie *pcie) val |= PCIE20_ELBI_SYS_CTRL_LT_ENABLE; writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL); - do { - if (dw_pcie_link_up(&pcie->pp)) - return 0; - usleep_range(250, 1000); - } while (retries < 200); - - dev_warn(dev, "phy link never came up\n"); - - return -ETIMEDOUT; + return dw_pcie_wait_for_link(&pcie->pp); } static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie) diff --git a/drivers/pci/host/pcie-spear13xx.c b/drivers/pci/host/pcie-spear13xx.c index a6cd823..a4060b8 100644 --- a/drivers/pci/host/pcie-spear13xx.c +++ b/drivers/pci/host/pcie-spear13xx.c @@ -13,7 +13,6 @@ */ #include <linux/clk.h> -#include <linux/delay.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> @@ -149,7 +148,6 @@ static int spear13xx_pcie_establish_link(struct pcie_port *pp) struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp); struct pcie_app_reg *app_reg = spear13xx_pcie->app_base; u32 exp_cap_off = EXP_CAP_ID_OFFSET; - unsigned int retries; if (dw_pcie_link_up(pp)) { dev_err(pp->dev, "link already up\n"); @@ -200,17 +198,7 @@ static int spear13xx_pcie_establish_link(struct pcie_port *pp) | ((u32)1 << REG_TRANSLATION_ENABLE), &app_reg->app_ctrl_0); - /* check if the link is up or not */ - for (retries = 0; retries < 10; retries++) { - if (dw_pcie_link_up(pp)) { - dev_info(pp->dev, "link up\n"); - return 0; - } - mdelay(100); - } - - dev_err(pp->dev, "link Fail\n"); - return -EINVAL; + return dw_pcie_wait_for_link(pp); } static irqreturn_t spear13xx_pcie_irq_handler(int irq, void *arg) |
