diff options
Diffstat (limited to 'drivers')
274 files changed, 417 insertions, 458 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index 48bbdbe..26e434a 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -1,5 +1,3 @@ -# drivers/Kconfig - menu "Device Drivers" source "drivers/base/Kconfig" diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 575593a..27c7772 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -7,7 +7,7 @@ * video_detect.c: * Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c * There a Linux specific (Spec does not provide a HID for video devices) is - * assinged + * assigned * * After PCI devices are glued with ACPI devices * acpi_get_pci_dev() can be called to identify ACPI graphics @@ -83,16 +83,16 @@ long acpi_is_video_device(struct acpi_device *device) if (!device) return 0; - /* Does this device able to support video switching ? */ + /* Is this device able to support video switching ? */ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) || ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING; - /* Does this device able to retrieve a video ROM ? */ + /* Is this device able to retrieve a video ROM ? */ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) video_caps |= ACPI_VIDEO_ROM_AVAILABLE; - /* Does this device able to configure which video head to be POSTed ? */ + /* Is this device able to configure which video head to be POSTed ? */ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) && ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) && ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy))) @@ -137,7 +137,7 @@ find_video(acpi_handle handle, u32 lvl, void *context, void **rv) * * if NULL is passed as argument all ACPI devices are enumerated and * all graphics capabilities of physically present devices are - * summerized and returned. This is cached and done only once. + * summarized and returned. This is cached and done only once. */ long acpi_video_get_capabilities(acpi_handle graphics_handle) { diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 9ac4e37..3aadded 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -599,7 +599,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1028, 0x02b0 }, /* ICH7 on unknown Dell */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ - { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unkown HP */ + { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unknown HP */ { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */ { 0x27DF, 0x152D, 0x0778 }, /* ICH7 on unknown Intel */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index bbbb1fa..d210ef2 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -736,7 +736,7 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf, /* * Use io*16_rep() accessors here as well to avoid pointlessly - * swapping bytes to and fro on the big endian machines... + * swapping bytes to and from on the big endian machines... */ if (rw == READ) { ioread16_rep(data_addr, pad, 1); @@ -776,7 +776,7 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, void __iomem *data_addr = ap->ioaddr.data_addr; unsigned int words = buflen >> 2; int slop = buflen & 3; - + if (!(ap->pflags & ATA_PFLAG_PIO32)) return ata_sff_data_xfer(dev, buf, buflen, rw); @@ -795,7 +795,7 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, /* * Use io*_rep() accessors here as well to avoid pointlessly - * swapping bytes to and fro on the big endian machines... + * swapping bytes to and from on the big endian machines... */ if (rw == READ) { if (slop < 3) diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 403f561..71cef9a 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -4,7 +4,7 @@ * Alan Cox <alan@lxorguk.ukuu.org.uk> * * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and - * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de + * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de> * and Alexander Kiausch <alex.kiausch@t-online.de> * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 172b57e..e295f86 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -43,9 +43,9 @@ enum { /* * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and * chained indirect PRDEs upto a max count of 63. - * We are allocating an array of 63 PRDEs contigiously, but PRDE#15 will + * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will * be setup as an indirect descriptor, pointing to it's next - * (contigious) PRDE. Though chained indirect PRDE arrays are + * (contiguous) PRDE. Though chained indirect PRDE arrays are * supported,it will be more efficient to use a direct PRDT and * a single chain/link to indirect PRDE array/PRDT. */ @@ -314,7 +314,7 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, u32 ttl_dwords = 0; /* - * NOTE : direct & indirect prdt's are contigiously allocated + * NOTE : direct & indirect prdt's are contiguously allocated */ struct prde *prd = (struct prde *)&((struct command_desc *) cmd_desc)->prdt; diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index b2c1b37..f734b34 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -1132,7 +1132,7 @@ static int rx_pkt(struct atm_dev *dev) IF_ERR(printk(" cause: packet time out\n");) } else { - IF_ERR(printk(" cause: buffer over flow\n");) + IF_ERR(printk(" cause: buffer overflow\n");) } goto out_free_desc; } diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 979d159..ee95c76 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -188,7 +188,7 @@ EXPORT_SYMBOL_GPL(wait_for_device_probe); * @dev: device to try to bind to the driver * * This function returns -ENODEV if the device is not registered, - * 1 if the device is bound sucessfully and 0 otherwise. + * 1 if the device is bound successfully and 0 otherwise. * * This function must be called with @dev->sem held. When called for a * USB interface, @dev->parent->sem must be held as well. diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 847a9e5..a5af1d6 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -1478,10 +1478,7 @@ void do_fd_request(struct request_queue * q) stdma_lock(floppy_irq, NULL); atari_disable_irq( IRQ_MFP_FDC ); - local_save_flags(flags); /* The request function is called with ints - local_irq_disable(); * disabled... so must save the IPL for later */ redo_fd_request(); - local_irq_restore(flags); atari_enable_irq( IRQ_MFP_FDC ); } diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h index dbaed1e..8098fcc 100644 --- a/drivers/block/cciss_cmd.h +++ b/drivers/block/cciss_cmd.h @@ -5,7 +5,7 @@ //########################################################################### #define CISS_VERSION "1.00" -//general boundary defintions +//general boundary definitions #define SENSEINFOBYTES 32//note that this value may vary between host implementations #define MAXSGENTRIES 31 #define MAXREPLYQS 256 diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index 5b33b85..63bfc54 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -535,7 +535,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv) break; default: - BT_ERR("Unknow packet type:%d", type); + BT_ERR("Unknown packet type:%d", type); print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload, blksz * buf_block_len); diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 4895f0e..aa09193 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -214,7 +214,7 @@ static int hci_uart_send_frame(struct sk_buff *skb) struct hci_uart *hu; if (!hdev) { - BT_ERR("Frame for uknown device (hdev=NULL)"); + BT_ERR("Frame for unknown device (hdev=NULL)"); return -ENODEV; } diff --git a/drivers/char/mem.c b/drivers/char/mem.c index a074fce..42e65cf 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -5,7 +5,7 @@ * * Added devfs support. * Jan-11-1998, C. Scott Ananian <cananian@alumni.princeton.edu> - * Shared /dev/zero mmaping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com> + * Shared /dev/zero mmapping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com> */ #include <linux/mm.h> diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index 1997270..ecb89d7 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -248,7 +248,7 @@ static const struct vm_operations_struct mspec_vm_ops = { /* * mspec_mmap * - * Called when mmaping the device. Initializes the vma with a fault handler + * Called when mmapping the device. Initializes the vma with a fault handler * and private data structure necessary to allocate, track, and free the * underlying pages. */ diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index 6934025..c1d8b54 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -602,7 +602,7 @@ static void receive_char(struct r3964_info *pInfo, const unsigned char c) } break; case R3964_WAIT_FOR_RX_REPEAT: - /* FALLTROUGH */ + /* FALLTHROUGH */ case R3964_IDLE: if (c == STX) { /* Prevent rx_queue from overflow: */ diff --git a/drivers/char/rio/route.h b/drivers/char/rio/route.h index 20ed73f..46e9637 100644 --- a/drivers/char/rio/route.h +++ b/drivers/char/rio/route.h @@ -67,7 +67,7 @@ typedef struct COST_ROUTE COST_ROUTE; struct COST_ROUTE { unsigned char cost; /* Cost down this link */ - unsigned char route[NODE_BYTES]; /* Nodes thorough this route */ + unsigned char route[NODE_BYTES]; /* Nodes through this route */ }; typedef struct ROUTE_STR ROUTE_STR; diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 8e67d5c..6bd5f88 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -315,7 +315,7 @@ EXPORT_SYMBOL(tty_termios_input_baud_rate); * For maximal back compatibility with legacy SYS5/POSIX *nix behaviour * we need to carefully set the bits when the user does not get the * desired speed. We allow small margins and preserve as much of possible - * of the input intent to keep compatiblity. + * of the input intent to keep compatibility. * * Locking: Caller should hold termios lock. This is already held * when calling this function from the driver termios handler. diff --git a/drivers/cpuidle/governor.c b/drivers/cpuidle/governor.c index 70b5964..724c164 100644 --- a/drivers/cpuidle/governor.c +++ b/drivers/cpuidle/governor.c @@ -21,7 +21,7 @@ struct cpuidle_governor *cpuidle_curr_governor; * __cpuidle_find_governor - finds a governor of the specified name * @str: the name * - * Must be called with cpuidle_lock aquired. + * Must be called with cpuidle_lock acquired. */ static struct cpuidle_governor * __cpuidle_find_governor(const char *str) { @@ -39,7 +39,7 @@ static struct cpuidle_governor * __cpuidle_find_governor(const char *str) * @gov: the new target governor * * NOTE: "gov" can be NULL to specify disabled - * Must be called with cpuidle_lock aquired. + * Must be called with cpuidle_lock acquired. */ int cpuidle_switch_governor(struct cpuidle_governor *gov) { diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index 5f753fc..09ad915 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -863,7 +863,7 @@ static int hifn_init_pubrng(struct hifn_device *dev) dev->dmareg |= HIFN_DMAIER_PUBDONE; hifn_write_1(dev, HIFN_1_DMA_IER, dev->dmareg); - dprintk("Chip %s: Public key engine has been sucessfully " + dprintk("Chip %s: Public key engine has been successfully " "initialised.\n", dev->name); } diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 7585c41..c52ac9e 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -99,7 +99,7 @@ static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan, } /** - * atc_desc_get - get a unsused descriptor from free_list + * atc_desc_get - get an unused descriptor from free_list * @atchan: channel we want a new descriptor for */ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c index fddf2b3..d373d17 100644 --- a/drivers/firewire/core-topology.c +++ b/drivers/firewire/core-topology.c @@ -183,7 +183,7 @@ static inline struct fw_node *fw_node(struct list_head *l) * This function builds the tree representation of the topology given * by the self IDs from the latest bus reset. During the construction * of the tree, the function checks that the self IDs are valid and - * internally consistent. On succcess this function returns the + * internally consistent. On success this function returns the * fw_node corresponding to the local card otherwise NULL. */ static struct fw_node *build_tree(struct fw_card *card, diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 5cae0b3..3f7c500 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -272,7 +272,7 @@ EXPORT_SYMBOL(drm_mode_object_find); * functions & device file and adds it to the master fd list. * * RETURNS: - * Zero on success, error code on falure. + * Zero on success, error code on failure. */ int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, const struct drm_framebuffer_funcs *funcs) @@ -2328,7 +2328,7 @@ int drm_mode_connector_property_set_ioctl(struct drm_device *dev, } else if (connector->funcs->set_property) ret = connector->funcs->set_property(connector, property, out_resp->value); - /* store the property value if succesful */ + /* store the property value if successful */ if (!ret) drm_connector_property_set_value(connector, property, out_resp->value); out: diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index abfc27b..a2a3fa5 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1309,7 +1309,7 @@ out_free_list: * i915_gem_release_mmap - remove physical page mappings * @obj: obj in question * - * Preserve the reservation of the mmaping with the DRM core code, but + * Preserve the reservation of the mmapping with the DRM core code, but * relinquish ownership of the pages back to the system. * * It is vital that we remove the page mapping if we have mapped a tiled diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 2b0fe54..40fcf6f 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -70,7 +70,7 @@ static struct drm_fb_helper_funcs intel_fb_helper_funcs = { /** - * Curretly it is assumed that the old framebuffer is reused. + * Currently it is assumed that the old framebuffer is reused. * * LOCKING * caller should hold the mode config lock. diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 083bec2..e7fa327 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2726,7 +2726,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) /* Wrap with our custom algo which switches to DDC mode */ intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo; - /* In defaut case sdvo lvds is false */ + /* In default case sdvo lvds is false */ intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); if (intel_sdvo_output_setup(intel_output, diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index c11dddd..6643afc 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -1141,7 +1141,7 @@ typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS { /* ucTableFormatRevision=1,ucTableContentRevision=2 */ typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 { USHORT usPixelClock; /* in 10KHz; for bios convenient */ - UCHAR ucMisc; /* see PANEL_ENCODER_MISC_xx defintions below */ + UCHAR ucMisc; /* see PANEL_ENCODER_MISC_xx definitions below */ UCHAR ucAction; /* 0: turn off encoder */ /* 1: setup and turn on encoder */ UCHAR ucTruncate; /* bit0=0: Disable truncate */ @@ -1424,7 +1424,7 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO { /* Structures used in FirmwareInfoTable */ /****************************************************************************/ -/* usBIOSCapability Defintion: */ +/* usBIOSCapability Definition: */ /* Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; */ /* Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; */ /* Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; */ @@ -2386,7 +2386,7 @@ typedef struct _ATOM_ANALOG_TV_INFO_V1_2 { } ATOM_ANALOG_TV_INFO_V1_2; /**************************************************************************/ -/* VRAM usage and their defintions */ +/* VRAM usage and their definitions */ /* One chunk of VRAM used by Bios are for HWICON surfaces,EDID data. */ /* Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below. */ @@ -3046,7 +3046,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO { #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3 -/* Byte aligned defintion for BIOS usage */ +/* Byte aligned definition for BIOS usage */ #define ATOM_S0_CRT1_MONOb0 0x01 #define ATOM_S0_CRT1_COLORb0 0x02 #define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0) @@ -3131,7 +3131,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO { #define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30 #define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L -/* Byte aligned defintion for BIOS usage */ +/* Byte aligned definition for BIOS usage */ #define ATOM_S2_TV1_STANDARD_MASKb0 0x0F #define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF #define ATOM_S2_CRT1_DPMS_STATEb2 0x01 @@ -3190,7 +3190,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO { #define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L #define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L -/* Byte aligned defintion for BIOS usage */ +/* Byte aligned definition for BIOS usage */ #define ATOM_S3_CRT1_ACTIVEb0 0x01 #define ATOM_S3_LCD1_ACTIVEb0 0x02 #define ATOM_S3_TV1_ACTIVEb0 0x04 @@ -3230,7 +3230,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO { #define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L #define ATOM_S4_LCD1_REFRESH_SHIFT 8 -/* Byte aligned defintion for BIOS usage */ +/* Byte aligned definition for BIOS usage */ #define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF #define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0 #define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0 @@ -3310,7 +3310,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO { #define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L #define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L -/* Byte aligned defintion for BIOS usage */ +/* Byte aligned definition for BIOS usage */ #define ATOM_S6_DEVICE_CHANGEb0 0x01 #define ATOM_S6_SCALER_CHANGEb0 0x02 #define ATOM_S6_LID_CHANGEb0 0x04 diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 278f646..6740ed2 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -394,11 +394,11 @@ int r600_mc_init(struct radeon_device *rdev) * AGP so that GPU can catch out of VRAM/AGP access */ if (rdev->mc.gtt_location > rdev->mc.mc_vram_size) { - /* Enought place before */ + /* Enough place before */ rdev->mc.vram_location = rdev->mc.gtt_location - rdev->mc.mc_vram_size; } else if (tmp > rdev->mc.mc_vram_size) { - /* Enought place after */ + /* Enough place after */ rdev->mc.vram_location = rdev->mc.gtt_location + rdev->mc.gtt_size; } else { diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index b38c4c8..d10eb43 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -59,7 +59,7 @@ static struct fb_ops radeonfb_ops = { }; /** - * Curretly it is assumed that the old framebuffer is reused. + * Currently it is assumed that the old framebuffer is reused. * * LOCKING * caller should hold the mode config lock. diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c index 38537d9..067167c 100644 --- a/drivers/gpu/drm/radeon/radeon_state.c +++ b/drivers/gpu/drm/radeon/radeon_state.c @@ -1950,7 +1950,7 @@ static void radeon_apply_surface_regs(int surf_index, * Note that refcount can be at most 2, since during a free refcount=3 * might mean we have to allocate a new surface which might not always * be available. - * For example : we allocate three contigous surfaces ABC. If B is + * For example : we allocate three contiguous surfaces ABC. If B is * freed, we suddenly need two surfaces to store A and C, which might * not always be available. */ diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 1381e06..eda4ade 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -378,7 +378,7 @@ static int radeon_bo_move(struct ttm_buffer_object *bo, new_mem->mem_type == TTM_PL_SYSTEM) || (old_mem->mem_type == TTM_PL_SYSTEM && new_mem->mem_type == TTM_PL_TT)) { - /* bind is enought */ + /* bind is enough */ radeon_move_null(bo, new_mem); return 0; } diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index b0efd0d..5e06ee7 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -829,11 +829,11 @@ int rv770_mc_init(struct radeon_device *rdev) * AGP so that GPU can catch out of VRAM/AGP access */ if (rdev->mc.gtt_location > rdev->mc.mc_vram_size) { - /* Enought place before */ + /* Enough place before */ rdev->mc.vram_location = rdev->mc.gtt_location - rdev->mc.mc_vram_size; } else if (tmp > rdev->mc.mc_vram_size) { - /* Enought place after */ + /* Enough place after */ rdev->mc.vram_location = rdev->mc.gtt_location + rdev->mc.gtt_size; } else { diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index c70927e..61c5572 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -427,7 +427,7 @@ static int ttm_bo_kmap_ttm(struct ttm_buffer_object *bo, /* * We need to use vmap to get the desired page protection - * or to make the buffer object look contigous. + * or to make the buffer object look contiguous. */ prot = (mem->placement & TTM_PL_FLAG_CACHED) ? PAGE_KERNEL : diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c index 3671815..e845b75 100644 --- a/drivers/hwmon/adm1029.c +++ b/drivers/hwmon/adm1029.c @@ -432,7 +432,7 @@ static int adm1029_remove(struct i2c_client *client) } /* -function that update the status of the chips (temperature for exemple) +function that update the status of the chips (temperature for example) */ static struct adm1029_data *adm1029_update_device(struct device *dev) { diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index fc36cad..c48a284 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -928,7 +928,7 @@ static void lm93_update_client_common(struct lm93_data *data, data->prochot_interval = lm93_read_byte(client, LM93_REG_PROCHOT_INTERVAL); - /* Fan Boost Termperature registers */ + /* Fan Boost Temperature registers */ for (i = 0; i < 4; i++) data->boost[i] = lm93_read_byte(client, LM93_REG_BOOST(i)); diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index 2cd00b5..9fd4a0d 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -125,7 +125,7 @@ 0 - no debugging messages 1 - some debugging messages, but none during DMA frame transmission 2 - lots of messages, including during DMA frame transmission - (will cause undeflows if your machine is too slow!) + (will cause underflows if your machine is too slow!) */ #define DV1394_DEBUG_LEVEL 0 diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index 72ed339..0677fc7 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -589,7 +589,7 @@ static int cxio_hal_destroy_ctrl_qp(struct cxio_rdev *rdev_p) /* write len bytes of data into addr (32B aligned address) * If data is NULL, clear len byte of memory to zero. - * caller aquires the ctrl_qp lock before the call + * caller acquires the ctrl_qp lock before the call */ static int cxio_hal_ctrl_qp_write_mem(struct cxio_rdev *rdev_p, u32 addr, u32 len, void *data) diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 4bd39c8..37d12e5 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -381,7 +381,7 @@ static const ipath_err_t infinipath_hwe_htclnkbbyte1crcerr = #define IPATH_GPIO_SCL \ (1ULL << (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT)) -/* keep the code below somewhat more readonable; not used elsewhere */ +/* keep the code below somewhat more readable; not used elsewhere */ #define _IPATH_HTLINK0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \ infinipath_hwe_htclnkabyte1crcerr) #define _IPATH_HTLINK1_CRCBITS (infinipath_hwe_htclnkbbyte0crcerr | \ diff --git a/drivers/infiniband/hw/ipath/ipath_sd7220.c b/drivers/infiniband/hw/ipath/ipath_sd7220.c index aa47eb5..2a68d9f 100644 --- a/drivers/infiniband/hw/ipath/ipath_sd7220.c +++ b/drivers/infiniband/hw/ipath/ipath_sd7220.c @@ -614,7 +614,7 @@ static int epb_trans(struct ipath_devdata *dd, u16 reg, u64 i_val, u64 *o_vp) * @wd: Write Data - value to set in register * @mask: ones where data should be spliced into reg. * - * Basic register read/modify/write, with un-needed acesses elided. That is, + * Basic register read/modify/write, with un-needed accesses elided. That is, * a mask of zero will prevent write, while a mask of 0xFF will prevent read. * returns current (presumed, if a write was done) contents of selected * register, or <0 if errors. @@ -989,7 +989,7 @@ static struct rxeq_init { /* Set DFELTHFDR/HDR thresholds */ RXEQ_VAL(7, 8, 0, 0, 0, 0), /* FDR */ RXEQ_VAL(7, 0x21, 0, 0, 0, 0), /* HDR */ - /* Set TLTHFDR/HDR theshold */ + /* Set TLTHFDR/HDR threshold */ RXEQ_VAL(7, 9, 2, 2, 2, 2), /* FDR */ RXEQ_VAL(7, 0x23, 2, 2, 2, 2), /* HDR */ /* Set Preamp setting 2 (ZFR/ZCNT) */ diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 219b103..256a00c 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -352,7 +352,7 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, * anymore, so we do this only if selective signaling is off. * * Further, on 32-bit platforms, we can't use vmap() to make - * the QP buffer virtually contigious. Thus we have to use + * the QP buffer virtually contiguous. Thus we have to use * constant-sized WRs to make sure a WR is always fully within * a single page-sized chunk. * diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index ea9e155..8579f32 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -499,7 +499,7 @@ void iser_conn_init(struct iser_conn *ib_conn) /** * starts the process of connecting to the target - * sleeps untill the connection is established or rejected + * sleeps until the connection is established or rejected */ int iser_connect(struct iser_conn *ib_conn, struct sockaddr_in *src_addr, diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 1c9410d..bcc2d30 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -955,7 +955,7 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed); ret = hp_sdc_init(); - /* after sucessfull initialization give SDC some time to settle + /* after successfull initialization give SDC some time to settle * and then load the hp_sdc_mlc upper layer driver */ if (!ret) schedule_delayed_work(&moduleloader_work, diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c index 820e516..7d2b820 100644 --- a/drivers/input/serio/hp_sdc_mlc.c +++ b/drivers/input/serio/hp_sdc_mlc.c @@ -125,7 +125,7 @@ static void hp_sdc_mlc_isr (int irq, void *dev_id, break; default: - printk(KERN_WARNING PREFIX "Unkown HIL Error status (%x)!\n", data); + printk(KERN_WARNING PREFIX "Unknown HIL Error status (%x)!\n", data); break; } diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c index 35377f5..a12242f 100644 --- a/drivers/input/touchscreen/atmel-wm97xx.c +++ b/drivers/input/touchscreen/atmel-wm97xx.c @@ -59,7 +59,7 @@ #define ATMEL_WM97XX_AC97C_IRQ (29) #define ATMEL_WM97XX_GPIO_DEFAULT (32+16) /* Pin 16 on port B. */ #else -#error Unkown CPU, this driver only supports AT32AP700X CPUs. +#error Unknown CPU, this driver only supports AT32AP700X CPUs. #endif struct continuous { diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index 8fc3b08..6cdcf2a 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -14,7 +14,7 @@ * * Notes: * This is a wm97xx extended touch driver to capture touch - * data in a continuous manner on the Intel XScale archictecture + * data in a continuous manner on the Intel XScale architecture * * Features: * - codecs supported:- WM9705, WM9712, WM9713 @@ -131,7 +131,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) /* When the AC97 queue has been drained we need to allow time * to buffer up samples otherwise we end up spinning polling * for samples. The controller can't have a suitably low - * threashold set to use the notifications it gives. + * threshold set to use the notifications it gives. */ schedule_timeout_uninterruptible(1); diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c index 41e4359..eca54db 100644 --- a/drivers/input/touchscreen/zylonite-wm97xx.c +++ b/drivers/input/touchscreen/zylonite-wm97xx.c @@ -96,7 +96,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) /* When the AC97 queue has been drained we need to allow time * to buffer up samples otherwise we end up spinning polling * for samples. The controller can't have a suitably low - * threashold set to use the notifications it gives. + * threshold set to use the notifications it gives. */ msleep(1); diff --git a/drivers/isdn/act2000/Kconfig b/drivers/isdn/act2000/Kconfig index 3fc1a54..fa2673f 100644 --- a/drivers/isdn/act2000/Kconfig +++ b/drivers/isdn/act2000/Kconfig @@ -1,6 +1,3 @@ -# -# Config.in for IBM Active 2000 ISDN driver -# config ISDN_DRV_ACT2000 tristate "IBM Active 2000 support" depends on ISA @@ -10,4 +7,3 @@ config ISDN_DRV_ACT2000 into the card using a utility which is part of the latest isdn4k-utils package. Please read the file <file:Documentation/isdn/README.act2000> for more information. - diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig index e1afd60..b2a0475 100644 --- a/drivers/isdn/capi/Kconfig +++ b/drivers/isdn/capi/Kconfig @@ -1,6 +1,3 @@ -# -# Config.in for the CAPI subsystem -# config ISDN_DRV_AVMB1_VERBOSE_REASON bool "Verbose reason code reporting" default y @@ -59,4 +56,3 @@ config ISDN_CAPI_CAPIDRV the legacy isdn4linux link layer. If you have a card which is supported by a CAPI driver, but still want to use old features like ippp interfaces or ttyI emulation, say Y/M here. - diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c index 3e6d17f..66b7d7a 100644 --- a/drivers/isdn/capi/capidrv.c +++ b/drivers/isdn/capi/capidrv.c @@ -830,7 +830,7 @@ static void handle_controller(_cmsg * cmsg) case 0: break; case 1: s = "unknown class"; break; case 2: s = "unknown function"; break; - default: s = "unkown error"; break; + default: s = "unknown error"; break; } if (s) printk(KERN_INFO "capidrv-%d: %s from controller 0x%x function %d: %s\n", diff --git a/drivers/isdn/hardware/eicon/di.c b/drivers/isdn/hardware/eicon/di.c index b029d13..cb14ae3 100644 --- a/drivers/isdn/hardware/eicon/di.c +++ b/drivers/isdn/hardware/eicon/di.c @@ -806,7 +806,7 @@ static void xdi_xlog_request (byte Adapter, byte Id, DELIVERY - indication entered isdn_rc function RNR=... - application had returned RNR=... after the look ahead callback - RNum=0 - aplication had not returned any buffer to copy + RNum=0 - application had not returned any buffer to copy this indication and will copy it self COMPLETE - XDI had copied the data to the buffers provided bu the application and is about to issue the diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c index 41c26e7..534978b 100644 --- a/drivers/isdn/hardware/eicon/maintidi.c +++ b/drivers/isdn/hardware/eicon/maintidi.c @@ -385,7 +385,7 @@ static int SuperTraceMessageInput (void* hLib) { } break; default: - diva_mnt_internal_dprintf (0, DLI_ERR, "Unknon IDI Ind (DMA mode): %02x", Ind); + diva_mnt_internal_dprintf (0, DLI_ERR, "Unknown IDI Ind (DMA mode): %02x", Ind); } p += (this_ind_length+1); total_length -= (4 + this_ind_length); @@ -420,7 +420,7 @@ static int SuperTraceMessageInput (void* hLib) { } break; default: - diva_mnt_internal_dprintf (0, DLI_ERR, "Unknon IDI Ind: %02x", Ind); + diva_mnt_internal_dprintf (0, DLI_ERR, "Unknown IDI Ind: %02x", Ind); } } } diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index fc46a26..a64bb6c 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -721,7 +721,7 @@ hfcsusb_setup_bch(struct bchannel *bch, int protocol) switch (protocol) { case (-1): /* used for init */ bch->state = -1; - /* fall trough */ + /* fall through */ case (ISDN_P_NONE): if (bch->state == ISDN_P_NONE) return 0; /* already in idle state */ diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.h b/drivers/isdn/hardware/mISDN/hfcsusb.h index 43efe73..369196a 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.h +++ b/drivers/isdn/hardware/mISDN/hfcsusb.h @@ -150,7 +150,7 @@ symbolic(struct hfcusb_symbolic_list list[], const int num) for (i = 0; list[i].name != NULL; i++) if (list[i].num == num) return list[i].name; - return "<unkown USB Error>"; + return "<unknown USB Error>"; } /* USB descriptor need to contain one of the following EndPoint combination: */ diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c index de352a1..09095c7 100644 --- a/drivers/isdn/hardware/mISDN/mISDNisar.c +++ b/drivers/isdn/hardware/mISDN/mISDNisar.c @@ -860,7 +860,7 @@ isar_pump_statev_modem(struct isar_ch *ch, u8 devt) { pr_debug("%s: pump stev GSTN CLEAR\n", ch->is->name); break; default: - pr_info("u%s: nknown pump stev %x\n", ch->is->name, devt); + pr_info("u%s: unknown pump stev %x\n", ch->is->name, devt); break; } } diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index a420b64..aaaeaaf 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -1086,7 +1086,7 @@ hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg) break; default: DBG(HFCUSB_DBG_STATES, - "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x", pr); + "HFC_USB: hfc_usb_d_l2l1: unknown state : %#x", pr); break; } } diff --git a/drivers/isdn/hysdn/Kconfig b/drivers/isdn/hysdn/Kconfig index c9e4231..e86bc65 100644 --- a/drivers/isdn/hysdn/Kconfig +++ b/drivers/isdn/hysdn/Kconfig @@ -1,6 +1,3 @@ -# -# Config.in for HYSDN ISDN driver -# config HYSDN tristate "Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)" depends on m && PROC_FS && PCI @@ -15,4 +12,3 @@ config HYSDN_CAPI depends on HYSDN && ISDN_CAPI help Say Y here if you like to use Hypercope's CAPI 2.0 interface. - diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index 90b56ed..507e13d 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -1563,7 +1563,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data) *(__be32 *)(p + 4) = cpu_to_be32(CISCO_SLARP_KEEPALIVE); *(__be32 *)(p + 8) = cpu_to_be32(lp->cisco_myseq); *(__be32 *)(p + 12) = cpu_to_be32(lp->cisco_yourseq); - *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliablity, always 0xffff + *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliability, always 0xffff p += 18; isdn_net_write_super(lp, skb); diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index 642d5aa..45df667 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -836,7 +836,7 @@ isdn_ppp_write(int min, struct file *file, const char __user *buf, int count) unsigned short hl; struct sk_buff *skb; /* - * we need to reserve enought space in front of + * we need to reserve enough space in front of * sk_buff. old call to dev_alloc_skb only reserved * 16 bytes, now we are looking what the driver want */ @@ -1326,7 +1326,7 @@ isdn_ppp_xmit(struct sk_buff *skb, struct net_device *netdev) struct sk_buff *new_skb; unsigned short hl; /* - * we need to reserve enought space in front of + * we need to reserve enough space in front of * sk_buff. old call to dev_alloc_skb only reserved * 16 bytes, now we are looking what the driver want. */ @@ -1674,7 +1674,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * - insert new fragment into the proper sequence slot (once that's done * newfrag will be set to NULL) * - reassemble any complete fragment sequence (non-null 'start' - * indicates there is a continguous sequence present) + * indicates there is a contiguous sequence present) * - discard any incomplete sequences that are below minseq -- due * to the fact that sender always increment sequence number, if there * is an incomplete sequence below minseq, no new fragments would diff --git a/drivers/isdn/i4l/isdn_ttyfax.c b/drivers/isdn/i4l/isdn_ttyfax.c index 78f7660..4c41f19 100644 --- a/drivers/isdn/i4l/isdn_ttyfax.c +++ b/drivers/isdn/i4l/isdn_ttyfax.c @@ -470,7 +470,7 @@ isdn_tty_cmd_FCLASS2(char **p, modem_info * info) } return 0; } - /* BADMUL=value - dummy 0=disable errorchk disabled (treshold multiplier) */ + /* BADMUL=value - dummy 0=disable errorchk disabled (threshold multiplier) */ if (!strncmp(p[0], "BADMUL", 6)) { p[0] += 6; switch (*p[0]) { diff --git a/drivers/isdn/icn/Kconfig b/drivers/isdn/icn/Kconfig index 89d15ee..4534f21 100644 --- a/drivers/isdn/icn/Kconfig +++ b/drivers/isdn/icn/Kconfig @@ -1,6 +1,3 @@ -# -# Config.in for ICN ISDN driver -# config ISDN_DRV_ICN tristate "ICN 2B and 4B support" depends on ISA @@ -13,4 +10,3 @@ config ISDN_DRV_ICN separately. See <file:Documentation/isdn/README> and <file:Documentation/isdn/README.icn> for more information. - diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c index 77ee286..43ff4d3 100644 --- a/drivers/isdn/mISDN/dsp_core.c +++ b/drivers/isdn/mISDN/dsp_core.c @@ -110,7 +110,7 @@ * crossconnections and conferences via software if not possible through * hardware. If hardware capability is available, hardware is used. * - * Echo: Is generated by CMX and is used to check performane of hard and + * Echo: Is generated by CMX and is used to check performance of hard and * software CMX. * * The CMX has special functions for conferences with one, two and more diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c index e04bad6..6d4da60 100644 --- a/drivers/isdn/mISDN/tei.c +++ b/drivers/isdn/mISDN/tei.c @@ -725,7 +725,7 @@ tei_id_ver_tout_net(struct FsmInst *fi, int event, void *arg) if (tm->rcnt == 1) { if (*debug & DEBUG_L2_TEI) tm->tei_m.printdebug(fi, - "check req for tei %d sucessful\n", tm->l2->tei); + "check req for tei %d successful\n", tm->l2->tei); mISDN_FsmChangeState(fi, ST_TEI_NOP); } else if (tm->rcnt > 1) { /* duplicate assignment; remove */ diff --git a/drivers/isdn/pcbit/Kconfig b/drivers/isdn/pcbit/Kconfig index ffba6ec..e9b2dd8 100644 --- a/drivers/isdn/pcbit/Kconfig +++ b/drivers/isdn/pcbit/Kconfig @@ -1,6 +1,3 @@ -# -# Config.in for PCBIT ISDN driver -# config ISDN_DRV_PCBIT tristate "PCBIT-D support" depends on ISA && (BROKEN || X86) @@ -11,4 +8,3 @@ config ISDN_DRV_PCBIT the card using a utility which is distributed separately. See <file:Documentation/isdn/README> and <file:Documentation/isdn/README.pcbit> for more information. - diff --git a/drivers/isdn/sc/Kconfig b/drivers/isdn/sc/Kconfig index e6510ca..7469863 100644 --- a/drivers/isdn/sc/Kconfig +++ b/drivers/isdn/sc/Kconfig @@ -1,6 +1,3 @@ -# -# Config.in for Spellcaster ISDN driver -# config ISDN_DRV_SC tristate "Spellcaster support" depends on ISA @@ -9,4 +6,3 @@ config ISDN_DRV_SC driver currently builds only in a modularized version. To build it, choose M here: the module will be called sc. See <file:Documentation/isdn/README.sc> for more information. - diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 8b93644..3fbe41b 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -15,7 +15,7 @@ * * WARNING: This driver has only been testen on Apple's * 1.25 MHz Dual G4 (March 03). It is tuned for a CPU - * temperatur around 57 C. + * temperature around 57 C. * * Copyright (C) 2003, 2004 Samuel Rydh (samuel@ibrium.se) * diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index ed10381..e412980 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -988,7 +988,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad_cipher; } - /* Compatiblity mode for old dm-crypt cipher strings */ + /* Compatibility mode for old dm-crypt cipher strings */ if (!chainmode || (strcmp(chainmode, "plain") == 0 && !ivmode)) { chainmode = "cbc"; ivmode = "plain"; diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c index 7e8f568..48cb154 100644 --- a/drivers/media/common/saa7146_i2c.c +++ b/drivers/media/common/saa7146_i2c.c @@ -98,7 +98,7 @@ static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, __le32 *op) op_count++; - /* loop throgh all bytes of message i */ + /* loop through all bytes of message i */ for(j = 0; j < m[i].len; j++) { /* write back all bytes that could have been read */ m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8)); diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 810f07d..52e4ce4 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -160,7 +160,7 @@ struct tuner_state { * search callback possible return status * * DVBFE_ALGO_SEARCH_SUCCESS - * The frontend search algorithm completed and returned succesfully + * The frontend search algorithm completed and returned successfully * * DVBFE_ALGO_SEARCH_ASLEEP * The frontend search algorithm is sleeping diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c index 0241a7c..8b8558f 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.c +++ b/drivers/media/dvb/dvb-core/dvb_net.c @@ -1396,7 +1396,7 @@ static int dvb_net_do_ioctl(struct inode *inode, struct file *file, return ret; } - /* binary compatiblity cruft */ + /* binary compatibility cruft */ case __NET_ADD_IF_OLD: { struct __dvb_net_if_old *dvbnetif = parg; diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 2ae7f64..bb69f37 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -344,7 +344,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) if (ret) return ret; - err("Unkown Anysee version: %02x %02x %02x. "\ + err("Unknown Anysee version: %02x %02x %02x. "\ "Please report the <linux-dvb@linuxtv.org>.", hw_info[0], hw_info[1], hw_info[2]); diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c index eeef50b..5c0126d 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -242,7 +242,7 @@ static struct dvb_usb_device_properties dibusb1_1_properties = { { &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL }, { &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL }, }, - { "Unkown USB1.1 DVB-T device ???? please report the name to the author", + { "Unknown USB1.1 DVB-T device ???? please report the name to the author", { &dibusb_dib3000mb_table[13], NULL }, { &dibusb_dib3000mb_table[14], NULL }, }, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c index edde87c..6b5ded9 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c @@ -259,7 +259,7 @@ int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d, *state = REMOTE_KEY_REPEAT; break; default: - deb_err("unkown type of remote status: %d\n",keybuf[0]); + deb_err("unknown type of remote status: %d\n",keybuf[0]); break; } return 0; diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c index 9da2cc9..f9702e3 100644 --- a/drivers/media/dvb/dvb-usb/usb-urb.c +++ b/drivers/media/dvb/dvb-usb/usb-urb.c @@ -56,7 +56,7 @@ static void usb_urb_complete(struct urb *urb) stream->complete(stream, b, urb->actual_length); break; default: - err("unkown endpoint type in completition handler."); + err("unknown endpoint type in completition handler."); return; } usb_submit_urb(urb,GFP_ATOMIC); @@ -228,7 +228,7 @@ int usb_urb_init(struct usb_data_stream *stream, struct usb_data_stream_properti case USB_ISOC: return usb_isoc_urb_init(stream); default: - err("unkown URB-type for data transfer."); + err("unknown URB-type for data transfer."); return -EINVAL; } } diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c index 74981ee..7c6431f 100644 --- a/drivers/media/dvb/frontends/au8522_decoder.c +++ b/drivers/media/dvb/frontends/au8522_decoder.c @@ -315,7 +315,7 @@ static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode) if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 || input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) { /* Despite what the table says, for the HVR-950q we still need - to be in CVBS mode for the S-Video input (reason uknown). */ + to be in CVBS mode for the S-Video input (reason unknown). */ /* filter_coef_type = 3; */ filter_coef_type = 5; } else { diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c index ffbcfab..00a4e8f 100644 --- a/drivers/media/dvb/frontends/cx24110.c +++ b/drivers/media/dvb/frontends/cx24110.c @@ -1,4 +1,4 @@ - /* +/* cx24110 - Single Chip Satellite Channel Receiver driver module Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de> based on @@ -96,7 +96,7 @@ static struct {u8 reg; u8 data;} cx24110_regdata[]= {0x42,0x00}, /* @ middle bytes " */ {0x43,0x00}, /* @ LSB " */ /* leave the carrier tracking loop parameters on default */ - /* leave the bit timing loop parameters at gefault */ + /* leave the bit timing loop parameters at default */ {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */ /* the cx24108 data sheet for symbol rates above 15MS/s */ {0x57,0x00}, /* @ Filter sigma delta enabled, positive */ diff --git a/drivers/media/dvb/frontends/cx24113.c b/drivers/media/dvb/frontends/cx24113.c index 075b2b5..e9ee555 100644 --- a/drivers/media/dvb/frontends/cx24113.c +++ b/drivers/media/dvb/frontends/cx24113.c @@ -589,7 +589,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe, info("detected CX24113 variant\n"); break; case REV_CX24113: - info("sucessfully detected\n"); + info("successfully detected\n"); break; default: err("unsupported device id: %x\n", state->rev); diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c index 136b9d2..ad4c8cf 100644 --- a/drivers/media/dvb/frontends/dib3000mb.c +++ b/drivers/media/dvb/frontends/dib3000mb.c @@ -154,7 +154,7 @@ static int dib3000mb_set_frontend(struct dvb_frontend* fe, case BANDWIDTH_AUTO: return -EOPNOTSUPP; default: - err("unkown bandwidth value."); + err("unknown bandwidth value."); return -EINVAL; } } diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c index 0100755..868b78b 100644 --- a/drivers/media/dvb/frontends/drx397xD.c +++ b/drivers/media/dvb/frontends/drx397xD.c @@ -81,7 +81,7 @@ static struct { #include "drx397xD_fw.h" }; -/* use only with writer lock aquired */ +/* use only with writer lock acquired */ static void _drx_release_fw(struct drx397xD_state *s, enum fw_ix ix) { memset(&fw[ix].data[0], 0, sizeof(fw[0].data)); diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c index 056387b..43971e6 100644 --- a/drivers/media/dvb/frontends/lgdt330x.c +++ b/drivers/media/dvb/frontends/lgdt330x.c @@ -479,7 +479,7 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) switch (state->current_modulation) { case QAM_256: case QAM_64: - /* Need to undestand why there are 3 lock levels here */ + /* Need to understand why there are 3 lock levels here */ if ((buf[0] & 0x07) == 0x07) *status |= FE_HAS_CARRIER; break; @@ -520,7 +520,7 @@ static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status) switch (state->current_modulation) { case QAM_256: case QAM_64: - /* Need to undestand why there are 3 lock levels here */ + /* Need to understand why there are 3 lock levels here */ if ((buf[0] & 0x07) == 0x07) *status |= FE_HAS_CARRIER; else diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c index a04c782..1570669 100644 --- a/drivers/media/dvb/frontends/stb0899_drv.c +++ b/drivers/media/dvb/frontends/stb0899_drv.c @@ -1571,7 +1571,7 @@ static enum dvbfe_search stb0899_search(struct dvb_frontend *fe, struct dvb_fron * stb0899_track * periodically check the signal level against a specified * threshold level and perform derotator centering. - * called once we have a lock from a succesful search + * called once we have a lock from a successful search * event. * * Will be called periodically called to maintain the diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 8d65c65..baf3159 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -2425,7 +2425,7 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called */ saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); - /* set event counter 1 treshold to maximum allowed value (rEC p55) */ + /* set event counter 1 threshold to maximum allowed value (rEC p55) */ saa7146_write(dev, ECT1R, 0x3fff ); #endif /* Set RPS1 Address register to point to RPS code (r108 p42) */ @@ -2559,7 +2559,7 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called */ saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); - /* set event counter 1 treshold to maximum allowed value (rEC p55) */ + /* set event counter 1 threshold to maximum allowed value (rEC p55) */ saa7146_write(dev, ECT1R, 0x3fff ); #endif /* Setup BUDGETPATCH MAIN RPS1 "program" (p35) */ diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index 60136688..9c92f9d 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -456,7 +456,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled // use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); - // set event counter 1 treshold to maximum allowed value (rEC p55) + // set event counter 1 threshold to maximum allowed value (rEC p55) saa7146_write(dev, ECT1R, 0x3fff ); #endif // Fix VSYNC level diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index a123908..5f79acb 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -28,7 +28,7 @@ * http://av-usbradio.sourceforge.net/index.php * http://sourceforge.net/projects/av-usbradio/ * Latest release of theirs project was in 2005. - * Probably, this driver could be improved trough using their + * Probably, this driver could be improved through using their * achievements (specifications given). * Also, Faidon Liambotis <paravoid@debian.org> wrote nice driver for this radio * in 2007. He allowed to use his driver to improve current mr800 radio driver. diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index 9b84a0c..cafb7e9 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -294,7 +294,7 @@ struct cx18_av_state { #define CXADEC_QAM_CONST_DEC 0x924 #define CXADEC_QAM_ROTATOR_FREQ 0x948 -/* Bit defintions / settings used in Mako Audio */ +/* Bit definitions / settings used in Mako Audio */ #define CXADEC_PREF_MODE_MONO_LANGA 0 #define CXADEC_PREF_MODE_MONO_LANGB 1 #define CXADEC_PREF_MODE_MONO_LANGC 2 diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 6dd51e2..e12082b 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -1200,7 +1200,7 @@ static struct pci_driver cx18_pci_driver = { .remove = cx18_remove, }; -static int module_start(void) +static int __init module_start(void) { printk(KERN_INFO "cx18: Start initialization, version %s\n", CX18_VERSION); @@ -1224,7 +1224,7 @@ static int module_start(void) return 0; } -static void module_cleanup(void) +static void __exit module_cleanup(void) { pci_unregister_driver(&cx18_pci_driver); } diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h index e23aaac..522ad53 100644 --- a/drivers/media/video/cx18/cx18-mailbox.h +++ b/drivers/media/video/cx18/cx18-mailbox.h @@ -41,7 +41,7 @@ struct cx18; /* * This structure is used by CPU to provide completed buffers information * Its structure is dictrated by the layout of the SCB, required by the - * firmware, but its defintion needs to be here, instead of in cx18-scb.h, + * firmware, but its definition needs to be here, instead of in cx18-scb.h, * for mailbox work order scheduling */ struct cx18_mdl_ack { diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c index 28f48f4..c217441 100644 --- a/drivers/media/video/cx231xx/cx231xx-avcore.c +++ b/drivers/media/video/cx231xx/cx231xx-avcore.c @@ -2414,9 +2414,11 @@ int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev) cx231xx_info("No ACK after %d msec -GPIO I2C failed!", nInit * 10); - /* readAck - throuth clock stretch ,slave has given a SCL signal, - so the SDA data can be directly read. */ + /* + * readAck + * through clock stretch, slave has given a SCL signal, + * so the SDA data can be directly read. + */ status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); if ((dev->gpio_val & 1 << dev->board.tuner_sda_gpio) == 0) { diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index c31284b..fa2d350 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -1957,7 +1957,7 @@ static struct pci_driver cx23885_pci_driver = { .resume = NULL, }; -static int cx23885_init(void) +static int __init cx23885_init(void) { printk(KERN_INFO "cx23885 driver version %d.%d.%d loaded\n", (CX23885_VERSION_CODE >> 16) & 0xff, @@ -1970,7 +1970,7 @@ static int cx23885_init(void) return pci_register_driver(&cx23885_pci_driver); } -static void cx23885_fini(void) +static void __exit cx23885_fini(void) { pci_unregister_driver(&cx23885_pci_driver); } diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 45e13ee..16c6a92 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -940,7 +940,7 @@ int cx23885_dvb_register(struct cx23885_tsport *port) int err, i; /* Here we need to allocate the correct number of frontends, - * as reflected in the cards struct. The reality is that currrently + * as reflected in the cards struct. The reality is that currently * no cx23885 boards support this - yet. But, if we don't modify this * code then the second frontend would never be allocated (later) * and fail with error before the attach in dvb_register(). diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index cf63460..b354111 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -624,7 +624,7 @@ int cx88_reset(struct cx88_core *core) /* setup image format */ cx_andor(MO_COLOR_CTRL, 0x4000, 0x4000); - /* setup FIFO Threshholds */ + /* setup FIFO Thresholds */ cx_write(MO_PDMA_STHRSH, 0x0807); cx_write(MO_PDMA_DTHRSH, 0x0807); diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/video/davinci/dm355_ccdc.c index 4629cabe..3143900 100644 --- a/drivers/media/video/davinci/dm355_ccdc.c +++ b/drivers/media/video/davinci/dm355_ccdc.c @@ -285,7 +285,7 @@ static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam) if ((ccdcparam->med_filt_thres < 0) || (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) { - dev_dbg(dev, "Invalid value of median filter thresold\n"); + dev_dbg(dev, "Invalid value of median filter threshold\n"); return -EINVAL; } @@ -959,7 +959,7 @@ static struct ccdc_hw_device ccdc_hw_dev = { }, }; -static int dm355_ccdc_init(void) +static int __init dm355_ccdc_init(void) { printk(KERN_NOTICE "dm355_ccdc_init\n"); if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0) @@ -969,7 +969,7 @@ static int dm355_ccdc_init(void) return 0; } -static void dm355_ccdc_exit(void) +static void __exit dm355_ccdc_exit(void) { vpfe_unregister_ccdc_device(&ccdc_hw_dev); } diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/video/davinci/dm644x_ccdc.c index 2f19a91..d5fa193 100644 --- a/drivers/media/video/davinci/dm644x_ccdc.c +++ b/drivers/media/video/davinci/dm644x_ccdc.c @@ -859,7 +859,7 @@ static struct ccdc_hw_device ccdc_hw_dev = { }, }; -static int dm644x_ccdc_init(void) +static int __init dm644x_ccdc_init(void) { printk(KERN_NOTICE "dm644x_ccdc_init\n"); if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0) @@ -869,7 +869,7 @@ static int dm644x_ccdc_init(void) return 0; } -static void dm644x_ccdc_exit(void) +static void __exit dm644x_ccdc_exit(void) { vpfe_unregister_ccdc_device(&ccdc_hw_dev); } diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/video/davinci/vpss.c index 6d709ca..453236b 100644 --- a/drivers/media/video/davinci/vpss.c +++ b/drivers/media/video/davinci/vpss.c @@ -53,7 +53,7 @@ struct vpss_hw_ops { int (*enable_clock)(enum vpss_clock_sel clock_sel, int en); /* select input to ccdc */ void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel); - /* clear wbl overlflow bit */ + /* clear wbl overflow bit */ int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel); }; diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index cf3af8d..e39efb4 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -304,7 +304,7 @@ static const __u8 initOv6650[] = { }; static const __u8 ov6650_sensor_init[][8] = { - /* Bright, contrast, etc are set througth SCBB interface. + /* Bright, contrast, etc are set through SCBB interface. * AVCAP on win2 do not send any data on this controls. */ /* Anyway, some registers appears to alter bright and constrat */ diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index fab7ef8..7dbd5ee 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -589,7 +589,7 @@ static void spca500_reinit(struct gspca_dev *gspca_dev) int err; __u8 Data; - /* some unknow command from Aiptek pocket dv and family300 */ + /* some unknown command from Aiptek pocket dv and family300 */ reg_w(gspca_dev, 0x00, 0x0d01, 0x01); reg_w(gspca_dev, 0x00, 0x0d03, 0x00); diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index b74a342..66f9f00 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -1636,7 +1636,7 @@ static const __u16 spca501c_arowana_init_data[][3] = { {} }; -/* Unknow camera from Ori Usbid 0x0000:0x0000 */ +/* Unknown camera from Ori Usbid 0x0000:0x0000 */ /* Based on snoops from Ori Cohen */ static const __u16 spca501c_mysterious_open_data[][3] = { {0x02, 0x000f, 0x0005}, @@ -1945,7 +1945,7 @@ static int sd_init(struct gspca_dev *gspca_dev) goto error; break; case MystFromOriUnknownCamera: - /* UnKnow Ori CMOS Camera data */ + /* Unknown Ori CMOS Camera data */ if (write_vector(gspca_dev, spca501c_mysterious_open_data)) goto error; break; @@ -1978,7 +1978,7 @@ static int sd_start(struct gspca_dev *gspca_dev) write_vector(gspca_dev, spca501c_arowana_open_data); break; case MystFromOriUnknownCamera: - /* UnKnow CMOS Camera data */ + /* Unknown CMOS Camera data */ write_vector(gspca_dev, spca501c_mysterious_init_data); break; default: diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index aa8f995..1a9af2e 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -631,7 +631,7 @@ static void spca504A_acknowledged_command(struct gspca_dev *gspca_dev, count = 200; while (--count > 0) { msleep(10); - /* gsmart mini2 write a each wait setting 1 ms is enought */ + /* gsmart mini2 write a each wait setting 1 ms is enough */ /* reg_w_riv(dev, req, idx, val); */ status = reg_r_12(gspca_dev, 0x01, 0x0001, 1); if (status == endcode) { diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index cdf3357..49c3c12 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7065,7 +7065,7 @@ static int sd_config(struct gspca_dev *gspca_dev, break; default: PDEBUG(D_PROBE, - "Sensor UNKNOW_0 force Tas5130"); + "Sensor UNKNOWN_0 force Tas5130"); sd->sensor = SENSOR_TAS5130CXX; } break; diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 463ec34..7cdbc1a 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -1361,7 +1361,7 @@ static struct pci_driver ivtv_pci_driver = { .remove = ivtv_remove, }; -static int module_start(void) +static int __init module_start(void) { printk(KERN_INFO "ivtv: Start initialization, version %s\n", IVTV_VERSION); @@ -1385,7 +1385,7 @@ static int module_start(void) return 0; } -static void module_cleanup(void) +static void __exit module_cleanup(void) { pci_unregister_driver(&ivtv_pci_driver); } diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c index eccb40a..2052293 100644 --- a/drivers/media/video/ov772x.c +++ b/drivers/media/video/ov772x.c @@ -247,7 +247,7 @@ /* COM5 */ #define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */ -#define AFR_SPPED 0x40 /* Auto frame rate control speed slection */ +#define AFR_SPPED 0x40 /* Auto frame rate control speed selection */ /* Auto frame rate max rate control */ #define AFR_NO_RATE 0x00 /* No reduction of frame rate */ #define AFR_1p2 0x10 /* Max reduction to 1/2 frame rate */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index 5b152ff..5fcad28 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -332,7 +332,7 @@ struct pvr2_hdw { /* Bit mask of PVR2_CVAL_INPUT choices which are valid for the hardware */ unsigned int input_avail_mask; - /* Bit mask of PVR2_CVAL_INPUT choices which are currenly allowed */ + /* Bit mask of PVR2_CVAL_INPUT choices which are currently allowed */ unsigned int input_allowed_mask; /* Location of eeprom or a negative number if none */ diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 2c0bb06..03d3926 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -1980,7 +1980,7 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) wake_up(&dev->fw_data->wait_fw); break; default: - printk(KERN_INFO "s2255 unknwn resp\n"); + printk(KERN_INFO "s2255 unknown resp\n"); } default: pdata++; diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index f87757f..c673901 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -1319,7 +1319,7 @@ static struct pci_driver saa7134_pci_driver = { #endif }; -static int saa7134_init(void) +static int __init saa7134_init(void) { INIT_LIST_HEAD(&saa7134_devlist); printk(KERN_INFO "saa7130/34: v4l2 driver version %d.%d.%d loaded\n", @@ -1333,7 +1333,7 @@ static int saa7134_init(void) return pci_register_driver(&saa7134_pci_driver); } -static void saa7134_fini(void) +static void __exit saa7134_fini(void) { pci_unregister_driver(&saa7134_pci_driver); } diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c index 709affc..e6aa0fb 100644 --- a/drivers/media/video/saa7164/saa7164-core.c +++ b/drivers/media/video/saa7164/saa7164-core.c @@ -724,13 +724,13 @@ static struct pci_driver saa7164_pci_driver = { .resume = NULL, }; -static int saa7164_init(void) +static int __init saa7164_init(void) { printk(KERN_INFO "saa7164 driver loaded\n"); return pci_register_driver(&saa7164_pci_driver); } -static void saa7164_fini(void) +static void __exit saa7164_fini(void) { pci_unregister_driver(&saa7164_pci_driver); } diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index d439c76..cb1de7e 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -106,7 +106,7 @@ struct zoran_params { unsigned long jpeg_markers; /* Which markers should go into the JPEG output. * Unless you exactly know what you do, leave them untouched. * Inluding less markers will make the resulting code - * smaller, but there will be fewer aplications + * smaller, but there will be fewer applications * which can read it. * The presence of the APP and COM marker is * influenced by APP0_len and COM_len ONLY! */ diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index d505b68..e39986a 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -940,7 +940,7 @@ static const struct block_device_operations i2o_block_fops = { * Allocate memory for the i2o_block_device struct, gendisk and request * queue and initialize them as far as no additional information is needed. * - * Returns a pointer to the allocated I2O Block device on succes or a + * Returns a pointer to the allocated I2O Block device on success or a * negative error code on failure. */ static struct i2o_block_device *i2o_block_device_alloc(void) diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 27cf4af..e5ab621 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -132,7 +132,7 @@ u32 i2o_cntxt_list_add(struct i2o_controller * c, void *ptr) * Removes a previously added pointer from the context list and returns * the matching context id. * - * Returns context id on succes or 0 on failure. + * Returns context id on success or 0 on failure. */ u32 i2o_cntxt_list_remove(struct i2o_controller * c, void *ptr) { @@ -198,7 +198,7 @@ void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context) * @c: controller to which the context list belong * @ptr: pointer to which the context id should be fetched * - * Returns context id which matches to the pointer on succes or 0 on + * Returns context id which matches to the pointer on success or 0 on * failure. */ u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr) diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 41c8fe2..ce5eda9 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -92,7 +92,7 @@ static void gru_vma_close(struct vm_area_struct *vma) /* * gru_file_mmap * - * Called when mmaping the device. Initializes the vma with a fault handler + * Called when mmapping the device. Initializes the vma with a fault handler * and private data structure necessary to allocate, track, and free the * underlying pages. */ diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 36a8d53..b8e7c5a 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -231,7 +231,8 @@ static unsigned int sdio_uart_get_mctrl(struct sdio_uart_port *port) return ret; } -static void sdio_uart_write_mctrl(struct sdio_uart_port *port, unsigned int mctrl) +static void sdio_uart_write_mctrl(struct sdio_uart_port *port, + unsigned int mctrl) { unsigned char mcr = 0; @@ -387,7 +388,8 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port) sdio_out(port, UART_IER, port->ier); } -static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *status) +static void sdio_uart_receive_chars(struct sdio_uart_port *port, + unsigned int *status) { struct tty_struct *tty = port->tty; unsigned int ch, flag; @@ -399,7 +401,7 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *s port->icount.rx++; if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { + UART_LSR_FE | UART_LSR_OE))) { /* * For statistics only */ @@ -417,9 +419,9 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *s * Mask off conditions which should be ignored. */ *status &= port->read_status_mask; - if (*status & UART_LSR_BI) { + if (*status & UART_LSR_BI) flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) + else if (*status & UART_LSR_PE) flag = TTY_PARITY; else if (*status & UART_LSR_FE) flag = TTY_FRAME; @@ -574,7 +576,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port) */ sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO); sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); sdio_out(port, UART_FCR, 0); /* @@ -635,7 +637,7 @@ static void sdio_uart_shutdown(struct sdio_uart_port *port) if (port->tty->termios->c_cflag & HUPCL) sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); - /* Disable interrupts from this port */ + /* Disable interrupts from this port */ sdio_release_irq(port->func); port->ier = 0; sdio_out(port, UART_IER, 0); @@ -659,7 +661,7 @@ skip: free_page((unsigned long)port->xmit.buf); } -static int sdio_uart_open (struct tty_struct *tty, struct file * filp) +static int sdio_uart_open(struct tty_struct *tty, struct file *filp) { struct sdio_uart_port *port; int ret; @@ -846,7 +848,7 @@ static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_t struct sdio_uart_port *port = tty->driver_data; unsigned int cflag = tty->termios->c_cflag; -#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) +#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) if ((cflag ^ old_termios->c_cflag) == 0 && RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) @@ -925,7 +927,7 @@ static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file, struct sdio_uart_port *port = tty->driver_data; int result; - result =sdio_uart_claim_func(port); + result = sdio_uart_claim_func(port); if(!result) { sdio_uart_update_mctrl(port, set, clear); sdio_uart_release_func(port); @@ -946,31 +948,31 @@ static int sdio_uart_proc_show(struct seq_file *m, void *v) seq_printf(m, "%d: uart:SDIO", i); if(capable(CAP_SYS_ADMIN)) { seq_printf(m, " tx:%d rx:%d", - port->icount.tx, port->icount.rx); + port->icount.tx, port->icount.rx); if (port->icount.frame) seq_printf(m, " fe:%d", - port->icount.frame); + port->icount.frame); if (port->icount.parity) seq_printf(m, " pe:%d", - port->icount.parity); + port->icount.parity); if (port->icount.brk) seq_printf(m, " brk:%d", - port->icount.brk); + port->icount.brk); if (port->icount.overrun) seq_printf(m, " oe:%d", - port->icount.overrun); + port->icount.overrun); if (port->icount.cts) seq_printf(m, " cts:%d", - port->icount.cts); + port->icount.cts); if (port->icount.dsr) seq_printf(m, " dsr:%d", - port->icount.dsr); + port->icount.dsr); if (port->icount.rng) seq_printf(m, " rng:%d", - port->icount.rng); + port->icount.rng); if (port->icount.dcd) seq_printf(m, " dcd:%d", - port->icount.dcd); + port->icount.dcd); } sdio_uart_port_put(port); seq_putc(m, '\n'); diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 99b74a3..941a4d3 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1360,7 +1360,7 @@ static struct mmc_host_ops s3cmci_ops = { static struct s3c24xx_mci_pdata s3cmci_def_pdata = { /* This is currently here to avoid a number of if (host->pdata) - * checks. Any zero fields to ensure reaonable defaults are picked. */ + * checks. Any zero fields to ensure reasonable defaults are picked. */ }; #ifdef CONFIG_CPU_FREQ diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index 9408099..35c6a23 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/chips/Kconfig - menu "RAM/ROM/Flash chip drivers" depends on MTD!=n @@ -242,4 +240,3 @@ config MTD_XIP then say N. endmenu - diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index c222514..35081ce 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/maps/Kconfig - menu "Self-contained MTD device drivers" depends on MTD!=n @@ -308,4 +306,3 @@ config MTD_DOCPROBE_55AA you have managed to wipe the first block. endmenu - diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 3aa05cd..592016a 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -18,7 +18,7 @@ to specify the offset instead of the absolute address NOTE: - With slram it's only possible to map a contigous memory region. Therfore + With slram it's only possible to map a contiguous memory region. Therefore if there's a device mapped somewhere in the region specified slram will fail to load (see kernel log if modprobe fails). diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig index 5a401d8..265f969 100644 --- a/drivers/mtd/lpddr/Kconfig +++ b/drivers/mtd/lpddr/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/chips/Kconfig - menu "LPDDR flash memory drivers" depends on MTD!=n @@ -20,4 +18,3 @@ config MTD_QINFO_PROBE families of devices. This serves similar purpose of CFI on legacy Flash products endmenu - diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 14be075..847e214a 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/maps/Kconfig - menu "Mapping drivers for chip access" depends on MTD!=n @@ -389,9 +387,9 @@ config MTD_IXP2000 depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000 help This enables MTD access to flash devices on platforms based - on Intel's IXP2000 family of network processors such as the - IXDP425 and Coyote. If you have an IXP2000 based board and - would like to use the flash chips on it, say 'Y'. + on Intel's IXP2000 family of network processors. If you have an + IXP2000 based board and would like to use the flash chips on it, + say 'Y'. config MTD_FORTUNET tristate "CFI Flash device mapped on the FortuNet board" diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 2fda0b6..6264bf1 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/nand/Kconfig - menuconfig MTD_NAND tristate "NAND Device Support" depends on MTD diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index e51c1ed7..b126cf8 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1056,7 +1056,7 @@ static struct nand_ecclayout doc200x_oobinfo = { }; /* Find the (I)NFTL Media Header, and optionally also the mirror media header. - On sucessful return, buf will contain a copy of the media header for + On successful return, buf will contain a copy of the media header for further processing. id is the string to scan for, and will presumably be either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media header. The page #s of the found media headers are placed in mh0_page and diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index db7ae9d..92320a6 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -475,7 +475,7 @@ int __nand_correct_data(unsigned char *buf, * * The b2 shift is there to get rid of the lowest two bits. * We could also do addressbits[b2] >> 1 but for the - * performace it does not make any difference + * performance it does not make any difference */ if (eccsize_mult == 1) byte_addr = (addressbits[b1] << 4) + addressbits[b0]; diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 11dc7e6..68b5b3a 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -875,7 +875,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, * @info: The controller instance. * @nmtd: The driver version of the MTD instance. * - * This routine is called after the chip probe has succesfully completed + * This routine is called after the chip probe has successfully completed * and the relevant per-chip information updated. This call ensure that * we update the internal state accordingly. * diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig index a38f580..3a9f157 100644 --- a/drivers/mtd/onenand/Kconfig +++ b/drivers/mtd/onenand/Kconfig @@ -1,7 +1,3 @@ -# -# linux/drivers/mtd/onenand/Kconfig -# - menuconfig MTD_ONENAND tristate "OneNAND Device Support" depends on MTD diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index b1cd7a1..0a8c7ea 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/ubi/Kconfig - menu "UBI - Unsorted block images" depends on MTD diff --git a/drivers/net/82596.c b/drivers/net/82596.c index ea6b139..1663bc9 100644 --- a/drivers/net/82596.c +++ b/drivers/net/82596.c @@ -19,7 +19,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index 4e6359f..766aabf 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -1633,8 +1633,13 @@ static int amd8111e_enable_link_change(struct amd8111e_priv* lp) readl(lp->mmio + CMD7); return 0; } -/* This function is called when a packet transmission fails to complete within a resonable period, on the assumption that an interrupts have been failed or the interface is locked up. This function will reinitialize the hardware */ +/* + * This function is called when a packet transmission fails to complete + * within a reasonable period, on the assumption that an interrupt have + * failed or the interface is locked up. This function will reinitialize + * the hardware. + */ static void amd8111e_tx_timeout(struct net_device *dev) { struct amd8111e_priv* lp = netdev_priv(dev); diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index b5dc7f5..9d828ae 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -120,7 +120,7 @@ static int irq = 5; /* Default IRQ */ * DAYNA driver mode: * Dayna DL2000/DaynaTalk PC (Half Length), COPS LT-95, * Farallon PhoneNET PC III, Farallon PhoneNET PC II - * Other cards possibly supported mode unkown though: + * Other cards possibly supported mode unknown though: * Dayna DL2000 (Full length), COPS LT/M (Micro-Channel) * * Cards NOT supported by this driver but supported by the ltpc.c diff --git a/drivers/net/ariadne.h b/drivers/net/ariadne.h index bb613f2..727be5c 100644 --- a/drivers/net/ariadne.h +++ b/drivers/net/ariadne.h @@ -244,7 +244,7 @@ struct Am79C960 { #define DLNKTST 0x0010 /* Disable Link Status */ #define DAPC 0x0008 /* Disable Automatic Polarity Correction */ #define MENDECL 0x0004 /* MENDEC Loopback Mode */ -#define LRTTSEL 0x0002 /* Low Receive Treshold/Transmit Mode Select */ +#define LRTTSEL 0x0002 /* Low Receive Threshold/Transmit Mode Select */ #define PORTSEL1 0x0001 /* Port Select Bits */ #define PORTSEL2 0x8000 /* Port Select Bits */ #define INTL 0x4000 /* Internal Loopback */ diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c index 1372e9a9..96506ea 100644 --- a/drivers/net/atl1c/atl1c_main.c +++ b/drivers/net/atl1c/atl1c_main.c @@ -1543,7 +1543,7 @@ static irqreturn_t atl1c_intr(int irq, void *data) if (status & ISR_OVER) if (netif_msg_intr(adapter)) dev_warn(&pdev->dev, - "TX/RX over flow (status = 0x%x)\n", + "TX/RX overflow (status = 0x%x)\n", status & ISR_OVER); /* link event */ diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index e5f9676..21f4077 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -435,7 +435,7 @@ enum be_if_flags { * filtering capabilities. */ struct be_cmd_req_if_create { struct be_cmd_req_hdr hdr; - u32 version; /* ignore currntly */ + u32 version; /* ignore currently */ u32 capability_flags; u32 enable_flags; u8 mac_addr[ETH_ALEN]; diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 876b357..c3a7db3 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1877,7 +1877,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func) goto fw_exit; } - dev_info(&adapter->pdev->dev, "Firmware flashed succesfully\n"); + dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n"); fw_exit: release_firmware(fw); diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index aa76cba..732eafd 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -2536,7 +2536,7 @@ /* [RC 1] A flag to indicate that overflow error occurred in one of the queues. */ #define QM_REG_OVFERROR 0x16805c -/* [RC 7] the Q were the qverflow occurs */ +/* [RC 7] the Q where the overflow occurs */ #define QM_REG_OVFQNUM 0x168058 /* [R 16] Pause state for physical queues 15-0 */ #define QM_REG_PAUSESTATE0 0x168410 diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 9b5936f..a1e7eb9 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -559,7 +559,7 @@ static void rlb_update_rx_clients(struct bonding *bond) } } - /* do not update the entries again untill this counter is zero so that + /* do not update the entries again until this counter is zero so that * not to confuse the clients. */ bond_info->rlb_update_delay_counter = RLB_UPDATE_DELAY; diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 6366061..b8d92c6 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -1285,7 +1285,7 @@ netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev) /* * We do not use Tx completion interrupts to free DMAd Tx packets. - * This is good for performamce but means that we rely on new Tx + * This is good for performance but means that we rely on new Tx * packets arriving to run the destructors of completed packets, * which open up space in their sockets' send queues. Sometimes * we do not get such new packets causing Tx to stall. A single diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c index d768852..75b099c 100644 --- a/drivers/net/ehea/ehea_ethtool.c +++ b/drivers/net/ehea/ehea_ethtool.c @@ -118,7 +118,7 @@ doit: ret = ehea_set_portspeed(port, sp); if (!ret) - ehea_info("%s: Port speed succesfully set: %dMbps " + ehea_info("%s: Port speed successfully set: %dMbps " "%s Duplex", port->netdev->name, port->port_speed, port->full_duplex == 1 ? "Full" : "Half"); @@ -134,7 +134,7 @@ static int ehea_nway_reset(struct net_device *dev) ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG); if (!ret) - ehea_info("%s: Port speed succesfully set: %dMbps " + ehea_info("%s: Port speed successfully set: %dMbps " "%s Duplex", port->netdev->name, port->port_speed, port->full_duplex == 1 ? "Full" : "Half"); diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index ed60fd6..0cab992 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -35,7 +35,7 @@ * driver only supports standard serial hardware (8250, 16450, 16550A) * * This modem usually draws its supply current out of the otherwise unused - * TXD pin of the serial port. Thus a contignuous stream of 0x00-bytes + * TXD pin of the serial port. Thus a contiguous stream of 0x00-bytes * is transmitted to achieve a positive supply voltage. * * hsk: This is a 4800 baud FSK modem, designed for TNC use. It works fine diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 1e8dd8c..8f7d0d1 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -115,7 +115,7 @@ struct smsc_ircc_subsystem_configuration { unsigned short vendor; /* PCI vendor ID */ unsigned short device; /* PCI vendor ID */ unsigned short subvendor; /* PCI subsystem vendor ID */ - unsigned short subdevice; /* PCI sybsystem device ID */ + unsigned short subdevice; /* PCI subsystem device ID */ unsigned short sir_io; /* I/O port for SIR */ unsigned short fir_io; /* I/O port for FIR */ unsigned char fir_irq; /* FIR IRQ */ diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index aa7286b..8739ba8 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -1384,7 +1384,7 @@ static inline void veth_build_dma_list(struct dma_chunk *list, unsigned long done; int i = 1; - /* FIXME: skbs are continguous in real addresses. Do we + /* FIXME: skbs are contiguous in real addresses. Do we * really need to break it into PAGE_SIZE chunks, or can we do * it just at the granularity of iSeries real->absolute * mapping? Indeed, given the way the allocator works, can we diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index a0c5785..b77238d 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -47,7 +47,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c index 51e11c3..c0dbfc1 100644 --- a/drivers/net/lib82596.c +++ b/drivers/net/lib82596.c @@ -47,7 +47,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 03b781a..829b9ec 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -204,7 +204,7 @@ static void mlx4_en_free_rx_desc(struct mlx4_en_priv *priv, en_dbg(DRV, priv, "Freeing fragment:%d\n", nr); dma = be64_to_cpu(rx_desc->data[nr].addr); - en_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma); + en_dbg(DRV, priv, "Unmapping buffer at dma:0x%llx\n", (u64) dma); pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size, PCI_DMA_FROMDEVICE); put_page(skb_frags[nr].page); diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index 8c72799..3d1396a 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -47,7 +47,7 @@ enum { static int inline_thold __read_mostly = MAX_INLINE; module_param_named(inline_thold, inline_thold, int, 0444); -MODULE_PARM_DESC(inline_thold, "treshold for using inline data"); +MODULE_PARM_DESC(inline_thold, "threshold for using inline data"); int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring, u32 size, diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index 4376147b..82c3ebc 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -162,7 +162,7 @@ enum { #define MLX4_EN_DEF_RX_PAUSE 1 #define MLX4_EN_DEF_TX_PAUSE 1 -/* Interval between sucessive polls in the Tx routine when polling is used +/* Interval between successive polls in the Tx routine when polling is used instead of interrupts (in per-core Tx rings) - should be power of 2 */ #define MLX4_EN_TX_POLL_MODER 16 #define MLX4_EN_TX_POLL_TIMEOUT (HZ / 4) diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c index b211613..86fde1a 100644 --- a/drivers/net/ps3_gelic_net.c +++ b/drivers/net/ps3_gelic_net.c @@ -296,7 +296,7 @@ static void gelic_card_reset_chain(struct gelic_card *card, * @card: card structure * @descr: descriptor to re-init * - * return 0 on succes, <0 on failure + * return 0 on success, <0 on failure * * allocates a new rx skb, iommu-maps it and attaches it to the descriptor. * Activate the descriptor state-wise diff --git a/drivers/net/ps3_gelic_wireless.h b/drivers/net/ps3_gelic_wireless.h index 5b631c6..0a88b53 100644 --- a/drivers/net/ps3_gelic_wireless.h +++ b/drivers/net/ps3_gelic_wireless.h @@ -199,7 +199,7 @@ struct gelic_eurus_rssi_info { /* for 'stat' member of gelic_wl_info */ enum gelic_wl_info_status_bit { GELIC_WL_STAT_CONFIGURED, - GELIC_WL_STAT_CH_INFO, /* ch info aquired */ + GELIC_WL_STAT_CH_INFO, /* ch info acquired */ GELIC_WL_STAT_ESSID_SET, /* ESSID specified by userspace */ GELIC_WL_STAT_BSSID_SET, /* BSSID specified by userspace */ GELIC_WL_STAT_WPA_PSK_SET, /* PMK specified by userspace */ diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 4c61051..f726433 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -3651,7 +3651,7 @@ static int ql_adapter_up(struct ql3_adapter *qdev) ql_sem_unlock(qdev, QL_DRVR_SEM_MASK); } else { printk(KERN_ERR PFX - "%s: Could not aquire driver lock.\n", + "%s: Could not acquire driver lock.\n", ndev->name); goto err_lock; } diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 0dd7839..cc42186 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3238,7 +3238,7 @@ static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev) /** * s2io_chk_xpak_counter - Function to check the status of the xpak counters - * @counter : couter value to be updated + * @counter : counter value to be updated * @flag : flag to indicate the status * @type : counter type * Description: diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index c072f7f..9d94a14 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1760,7 +1760,7 @@ static int sis900_rx(struct net_device *net_dev) sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - /* refill the Rx buffer, what if there is not enought + /* refill the Rx buffer, what if there is not enough * memory for new socket buffer ?? */ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { /* @@ -1775,7 +1775,7 @@ static int sis900_rx(struct net_device *net_dev) } /* This situation should never happen, but due to - some unknow bugs, it is possible that + some unknown bugs, it is possible that we are working on NULL sk_buff :-( */ if (sis_priv->rx_skbuff[entry] == NULL) { if (netif_msg_rx_err(sis_priv)) diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/skfp/h/smc.h index 1758d95..026a83b 100644 --- a/drivers/net/skfp/h/smc.h +++ b/drivers/net/skfp/h/smc.h @@ -393,10 +393,10 @@ struct smt_config { */ u_long mac_d_max ; /* MAC : D_Max timer value */ - u_long lct_short ; /* LCT : error threshhold */ - u_long lct_medium ; /* LCT : error threshhold */ - u_long lct_long ; /* LCT : error threshhold */ - u_long lct_extended ; /* LCT : error threshhold */ + u_long lct_short ; /* LCT : error threshold */ + u_long lct_medium ; /* LCT : error threshold */ + u_long lct_long ; /* LCT : error threshold */ + u_long lct_extended ; /* LCT : error threshold */ } ; #ifdef DEBUG diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index b27156eaf..db216a7 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -1002,7 +1002,7 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) } break; default: - printk("ioctl for %s: unknow cmd: %04x\n", dev->name, ioc.cmd); + printk("ioctl for %s: unknown cmd: %04x\n", dev->name, ioc.cmd); status = -EOPNOTSUPP; } // switch diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 6a10d7b..a76cd66 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1975,7 +1975,7 @@ static void sky2_link_down(struct sky2_port *sky2) netif_carrier_off(sky2->netdev); - /* Turn on link LED */ + /* Turn off link LED */ sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); if (netif_msg_link(sky2)) diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index f9cdcbc..24954fe 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -816,7 +816,7 @@ static int smsc911x_mii_probe(struct net_device *dev) SMSC_TRACE(HW, "Passed Loop Back Test"); #endif /* USE_PHY_WORK_AROUND */ - SMSC_TRACE(HW, "phy initialised succesfully"); + SMSC_TRACE(HW, "phy initialised successfully"); return 0; } diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h index b5716bd..016360c 100644 --- a/drivers/net/smsc911x.h +++ b/drivers/net/smsc911x.h @@ -30,7 +30,7 @@ #define SMSC_NAPI_WEIGHT 16 /* implements a PHY loopback test at initialisation time, to ensure a packet - * can be succesfully looped back */ + * can be successfully looped back */ #define USE_PHY_WORK_AROUND #define DPRINTK(nlevel, klevel, fmt, args...) \ diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 90e663f..40b51e6 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -409,7 +409,7 @@ spider_net_free_rx_chain_contents(struct spider_net_card *card) * @card: card structure * @descr: descriptor to re-init * - * Return 0 on succes, <0 on failure. + * Return 0 on success, <0 on failure. * * Allocates a new rx skb, iommu-maps it and attaches it to the * descriptor. Mark the descriptor as activated, ready-to-use. diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c index b624bb5..52586ee 100644 --- a/drivers/net/stmmac/gmac.c +++ b/drivers/net/stmmac/gmac.c @@ -112,7 +112,7 @@ static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode, " (threshold = %d)\n", txmode); csr6 &= ~DMA_CONTROL_TSF; csr6 &= DMA_CONTROL_TC_TX_MASK; - /* Set the transmit threashold */ + /* Set the transmit threshold */ if (txmode <= 32) csr6 |= DMA_CONTROL_TTC_32; else if (txmode <= 64) diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h index 684a363..2e82d6c 100644 --- a/drivers/net/stmmac/gmac.h +++ b/drivers/net/stmmac/gmac.h @@ -154,14 +154,14 @@ enum rx_tx_priority_ratio { #define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */ #define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ #define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ -/* Theshold for Activating the FC */ +/* Threshold for Activating the FC */ enum rfa { act_full_minus_1 = 0x00800000, act_full_minus_2 = 0x00800200, act_full_minus_3 = 0x00800400, act_full_minus_4 = 0x00800600, }; -/* Theshold for Deactivating the FC */ +/* Threshold for Deactivating the FC */ enum rfd { deac_full_minus_1 = 0x00400000, deac_full_minus_2 = 0x00400800, diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index 75fa32e..685cc3a 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -96,7 +96,7 @@ * * Change by Mike Sullivan et al.: * + added turbo card support. No need to use lanaid to configure - * the adapter into isa compatiblity mode. + * the adapter into isa compatibility mode. * * Changes by Burt Silverman to allow the computer to behave nicely when * a cable is pulled or not in place, or a PCMCIA card is removed hot. diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index ebda61bc4..78e12b5 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -426,7 +426,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev) smctr_malloc(dev, 1L); /* Allocate Non-MAC receive data buffers. - * To guarantee a minimum of 256 contigous memory to + * To guarantee a minimum of 256 contiguous memory to * UM_Receive_Packet's lookahead pointer, before a page * change or ring end is encountered, place each rx buffer on * a 256 byte boundary. diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 4469f24..5e9adba 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3798,7 +3798,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma prop = of_get_property(np, "tx-clock", NULL); if (!prop) { printk(KERN_ERR - "ucc_geth: mising tx-clock-name property\n"); + "ucc_geth: missing tx-clock-name property\n"); return -EINVAL; } if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) { diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index 03a6ca0..a007e2a 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -80,16 +80,16 @@ struct ucc_geth { frames) received that were between 128 (Including FCS length==4) and 255 octets */ u32 txok; /* Total number of octets residing in frames - that where involved in succesfull + that where involved in successfull transmission */ u16 txcf; /* Total number of PAUSE control frames transmitted by this MAC */ u8 res4[0x2]; u32 tmca; /* Total number of frames that were transmitted - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ u32 tbca; /* Total number of frames transmitted - succesfully that had destination address + successfully that had destination address field equal to the broadcast address */ u32 rxfok; /* Total number of frames received OK */ u32 rxbok; /* Total number of octets received OK */ @@ -98,9 +98,9 @@ struct ucc_geth { HW because it includes octets in frames that never even reach the UCC */ u32 rmca; /* Total number of frames that were received - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ - u32 rbca; /* Total number of frames received succesfully + u32 rbca; /* Total number of frames received successfully that had destination address equal to the broadcast address */ u32 scar; /* Statistics carry register */ @@ -759,15 +759,15 @@ struct ucc_geth_hardware_statistics { frames) received that were between 128 (Including FCS length==4) and 255 octets */ u32 txok; /* Total number of octets residing in frames - that where involved in succesfull + that where involved in successfull transmission */ u16 txcf; /* Total number of PAUSE control frames transmitted by this MAC */ u32 tmca; /* Total number of frames that were transmitted - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ u32 tbca; /* Total number of frames transmitted - succesfully that had destination address + successfully that had destination address field equal to the broadcast address */ u32 rxfok; /* Total number of frames received OK */ u32 rxbok; /* Total number of octets received OK */ @@ -776,9 +776,9 @@ struct ucc_geth_hardware_statistics { HW because it includes octets in frames that never even reach the UCC */ u32 rmca; /* Total number of frames that were received - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ - u32 rbca; /* Total number of frames received succesfully + u32 rbca; /* Total number of frames received successfully that had destination address equal to the broadcast address */ } __attribute__ ((packed)); diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index c6c9222..0c3c738 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -748,7 +748,7 @@ static int smsc95xx_phy_initialize(struct usbnet *dev) mii_nway_restart(&dev->mii); if (netif_msg_ifup(dev)) - devdbg(dev, "phy initialised succesfully"); + devdbg(dev, "phy initialised successfully"); return 0; } diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 840cff7..4d4c543 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -182,7 +182,7 @@ static inline pvc_device* find_pvc(hdlc_device *hdlc, u16 dlci) if (pvc->dlci == dlci) return pvc; if (pvc->dlci > dlci) - return NULL; /* the listed is sorted */ + return NULL; /* the list is sorted */ pvc = pvc->next; } diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 7ea71b3..ee784e0 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -927,7 +927,7 @@ static int __devinit lmc_init_one(struct pci_dev *pdev, sc->lmc_media = &lmc_t1_media; break; default: - printk(KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name); + printk(KERN_WARNING "%s: LMC UNKNOWN CARD!\n", dev->name); break; } diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 07c32e6..99d2747 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -1114,7 +1114,7 @@ error: * device. See the file header for the format. Run all checks on the * buffer header, then run over each payload's descriptors, verify * their consistency and act on each payload's contents. If - * everything is succesful, update the device's statistics. + * everything is successful, update the device's statistics. * * Note: You need to set the skb to contain only the length of the * received buffer; for that, use skb_trim(skb, RECEIVED_SIZE). diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h index a28c42f..4da0294 100644 --- a/drivers/net/wireless/ath/ath5k/base.h +++ b/drivers/net/wireless/ath/ath5k/base.h @@ -36,7 +36,7 @@ */ /* - * Defintions for the Atheros Wireless LAN controller driver. + * Definitions for the Atheros Wireless LAN controller driver. */ #ifndef _DEV_ATH_ATHVAR_H #define _DEV_ATH_ATHVAR_H @@ -193,7 +193,7 @@ struct ath5k_softc { struct ath5k_txq *cabq; /* content after beacon */ int power_level; /* Requested tx power in dbm */ - bool assoc; /* assocate state */ + bool assoc; /* associate state */ bool enable_beacon; /* true if beacons are on */ }; diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 644962a..81ea52c 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -1492,7 +1492,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) * This info is used to calibrate the baseband power table. Imagine * that for each channel there is a power curve that's hw specific * (depends on amplifier etc) and we try to "correct" this curve using - * offests we pass on to phy chip (baseband -> before amplifier) so that + * offsets we pass on to phy chip (baseband -> before amplifier) so that * it can use accurate power values when setting tx power (takes amplifier's * performance on each channel into account). * diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 1a039f2..6f04cc7 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -117,7 +117,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, /* * This code is used to optimize rf gain on different environments - * (temprature mostly) based on feedback from a power detector. + * (temperature mostly) based on feedback from a power detector. * * It's only used on RF5111 and RF5112, later RF chips seem to have * auto adjustment on hw -notice they have a much smaller BANK 7 and @@ -2675,7 +2675,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, /* Fill curves in reverse order * from lower power (max gain) * to higher power. Use curve -> idx - * backmaping we did on eeprom init */ + * backmapping we did on eeprom init */ u8 idx = pdg_curve_to_idx[pdg]; /* Grab the needed curves by index */ @@ -2777,7 +2777,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, /* Now we have a set of curves for this * channel on tmpL (x range is table_max - table_min * and y values are tmpL[pdg][]) sorted in the same - * order as EEPROM (because we've used the backmaping). + * order as EEPROM (because we've used the backmapping). * So for RF5112 it's from higher power to lower power * and for RF2413 it's from lower power to higher power. * For RF5111 we only have one curve. */ diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 1895d63..0a35ee6 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -969,7 +969,7 @@ static bool ath_rc_update_per(struct ath_softc *sc, * Since this probe succeeded, we allow the next * probe twice as soon. This allows the maxRate * to move up faster if the probes are - * succesful. + * successful. */ ath_rc_priv->probe_time = now_msec - rate_table->probe_interval / 2; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 098dda1..e56b941 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2955,7 +2955,7 @@ static void do_periodic_work(struct b43_wldev *dev) /* Periodic work locking policy: * The whole periodic work handler is protected by * wl->mutex. If another lock is needed somewhere in the - * pwork callchain, it's aquired in-place, where it's needed. + * pwork callchain, it's acquired in-place, where it's needed. */ static void b43_periodic_work_handler(struct work_struct *work) { diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 4b60148..881784b 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2277,7 +2277,7 @@ static void do_periodic_work(struct b43legacy_wldev *dev) /* Periodic work locking policy: * The whole periodic work handler is protected by * wl->mutex. If another lock is needed somewhere in the - * pwork callchain, it's aquired in-place, where it's needed. + * pwork callchain, it's acquired in-place, where it's needed. */ static void b43legacy_periodic_work_handler(struct work_struct *work) { diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 6e2fc0c..64af908 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -551,7 +551,7 @@ static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord, /* get number of entries */ field_count = *(((u16 *) & field_info) + 1); - /* abort if no enought memory */ + /* abort if no enough memory */ total_length = field_len * field_count; if (total_length > *len) { *len = total_length; @@ -3044,7 +3044,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv) IPW_MAX_BDS)) { /* TODO: Support merging buffers if more than * IPW_MAX_BDS are used */ - IPW_DEBUG_INFO("%s: Maximum BD theshold exceeded. " + IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. " "Increase fragmentation level.\n", priv->net_dev->name); } @@ -6820,7 +6820,7 @@ static int ipw2100_wx_get_range(struct net_device *dev, range->max_qual.updated = 7; /* Updated all three */ range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */ - /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ + /* TODO: Find real 'good' to 'bad' threshold value for RSSI */ range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM; range->avg_qual.noise = 0; range->avg_qual.updated = 7; /* Updated all three */ diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index a6ca536..fdbc97b 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -768,7 +768,7 @@ static int ipw_get_ordinal(struct ipw_priv *priv, u32 ord, void *val, u32 * len) /* get number of entries */ field_count = *(((u16 *) & field_info) + 1); - /* abort if not enought memory */ + /* abort if not enough memory */ total_len = field_len * field_count; if (total_len > *len) { *len = total_len; @@ -7732,7 +7732,7 @@ static void ipw_rebuild_decrypted_skb(struct ipw_priv *priv, case SEC_LEVEL_0: break; default: - printk(KERN_ERR "Unknow security level %d\n", + printk(KERN_ERR "Unknown security level %d\n", priv->ieee->sec.level); break; } @@ -8916,7 +8916,7 @@ static int ipw_wx_get_range(struct net_device *dev, range->max_qual.updated = 7; /* Updated all three */ range->avg_qual.qual = 70; - /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ + /* TODO: Find real 'good' to 'bad' threshold value for RSSI */ range->avg_qual.level = 0; /* FIXME to real average level */ range->avg_qual.noise = 0; range->avg_qual.updated = 7; /* Updated all three */ @@ -10289,7 +10289,7 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct libipw_txb *txb, case SEC_LEVEL_0: break; default: - printk(KERN_ERR "Unknow security level %d\n", + printk(KERN_ERR "Unknown security level %d\n", priv->ieee->sec.level); break; } diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index eb2b608..c7b3f17 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -175,7 +175,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv) ieee->host_decrypt = 1; ieee->host_mc_decrypt = 1; - /* Host fragementation in Open mode. Default is enabled. + /* Host fragmentation in Open mode. Default is enabled. * Note: host fragmentation is always enabled if host encryption * is enabled. For cards can do hardware encryption, they must do * hardware fragmentation as well. So we don't need a variable diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c index c430418..d13c885 100644 --- a/drivers/net/wireless/iwmc3200wifi/hal.c +++ b/drivers/net/wireless/iwmc3200wifi/hal.c @@ -411,7 +411,7 @@ static void iwm_build_lmac_hdr(struct iwm_priv *iwm, struct iwm_lmac_hdr *hdr, /* * iwm_hal_send_host_cmd(): sends commands to the UMAC or the LMAC. * Sending command to the LMAC is equivalent to sending a - * regular UMAC command with the LMAC passtrough or the LMAC + * regular UMAC command with the LMAC passthrough or the LMAC * wrapper UMAC command IDs. */ int iwm_hal_send_host_cmd(struct iwm_priv *iwm, diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c index 771a301..8ddb51a 100644 --- a/drivers/net/wireless/iwmc3200wifi/rx.c +++ b/drivers/net/wireless/iwmc3200wifi/rx.c @@ -1448,7 +1448,7 @@ static void iwm_rx_process_packet(struct iwm_priv *iwm, kfree_skb(packet->skb); break; default: - IWM_ERR(iwm, "Unknow ticket action: %d\n", + IWM_ERR(iwm, "Unknown ticket action: %d\n", le16_to_cpu(ticket_node->ticket->action)); kfree_skb(packet->skb); } diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 485a8d40..afe6abe 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -934,7 +934,7 @@ static int if_sdio_probe(struct sdio_func *func, } if (i == ARRAY_SIZE(if_sdio_models)) { - lbs_pr_err("unkown card model 0x%x\n", card->model); + lbs_pr_err("unknown card model 0x%x\n", card->model); ret = -ENODEV; goto free; } diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c index a3eefe1..84200da 100644 --- a/drivers/net/wireless/orinoco/hermes_dld.c +++ b/drivers/net/wireless/orinoco/hermes_dld.c @@ -550,7 +550,7 @@ static const struct { \ #define DEFAULT_PDR(pid) default_pdr_data_##pid -/* HWIF Compatiblity */ +/* HWIF Compatibility */ DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00"); /* PPPPSign */ @@ -656,7 +656,7 @@ int hermes_apply_pda_with_defaults(hermes_t *hw, record_id + 1, pdi); } break; - case 0x5: /* HWIF Compatiblity */ + case 0x5: /* HWIF Compatibility */ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005); break; case 0x108: /* PPPPSign */ diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index bc08464..f7f5c79 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -1897,7 +1897,7 @@ prism54_get_mac(struct net_device *ndev, struct iw_request_info *info, return 0; } -/* Setting policy also clears the MAC acl, even if we don't change the defaut +/* Setting policy also clears the MAC acl, even if we don't change the default * policy */ @@ -2323,7 +2323,7 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, case DOT11_OID_BEACON: send_formatted_event(priv, - "Received a beacon from an unkown AP", + "Received a beacon from an unknown AP", mlme, 0); break; diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index ccd6441..aced057 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -35,7 +35,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 100 diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h index 54d3795..3db9041 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -46,7 +46,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 121 diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index b01edca..d300082 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -46,7 +46,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 120 diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 93eb699..77b5116 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -37,7 +37,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 120 diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 81fe0be..e194332 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -37,7 +37,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 120 diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 33918fd..10c702b 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -3987,7 +3987,7 @@ wavelan_interrupt(int irq, #endif /* Prevent reentrancy. We need to do that because we may have - * multiple interrupt handler running concurently. + * multiple interrupt handler running concurrently. * It is safe because interrupts are disabled before aquiring * the spinlock. */ spin_lock(&lp->spinlock); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 6d66635..2b7f965 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -312,7 +312,7 @@ static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, * zd_mac_tx_failed - callback for failed frames * @dev: the mac80211 wireless device * - * This function is called if a frame couldn't be succesfully be + * This function is called if a frame couldn't be successfully be * transferred. The first frame from the tx queue, will be selected and * reported as error to the upper layers. */ diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index a6b4a5a..f511e70 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -650,7 +650,7 @@ ccio_clear_io_tlb(struct ioc *ioc, dma_addr_t iovp, size_t byte_cnt) * Mark the I/O Pdir entries invalid and blow away the corresponding I/O * TLB entries. * - * FIXME: at some threshhold it might be "cheaper" to just blow + * FIXME: at some threshold it might be "cheaper" to just blow * away the entire I/O TLB instead of individual entries. * * FIXME: Uturn has 256 TLB entries. We don't need to purge every diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig index 9652c3f..8390dca 100644 --- a/drivers/platform/Kconfig +++ b/drivers/platform/Kconfig @@ -1,5 +1,3 @@ -# drivers/platform/Kconfig - if X86 source "drivers/platform/x86/Kconfig" endif diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index a848c7e..edb1690 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -6545,7 +6545,7 @@ static struct ibm_struct volume_driver_data = { * The speeds are stored on handles * (FANA:FAN9), (FANC:FANB), (FANE:FAND). * - * There are three default speed sets, acessible as handles: + * There are three default speed sets, accessible as handles: * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H * * ACPI DSDT switches which set is in use depending on various diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c index 87b4f49..a5135eb 100644 --- a/drivers/pnp/pnpbios/rsparser.c +++ b/drivers/pnp/pnpbios/rsparser.c @@ -191,7 +191,7 @@ static unsigned char *pnpbios_parse_allocated_resource_data(struct pnp_dev *dev, return (unsigned char *)p; break; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); @@ -405,7 +405,7 @@ pnpbios_parse_resource_option_data(unsigned char *p, unsigned char *end, case SMALL_TAG_END: return p + 2; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); @@ -475,7 +475,7 @@ static unsigned char *pnpbios_parse_compatible_ids(unsigned char *p, return (unsigned char *)p; break; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); @@ -744,7 +744,7 @@ static unsigned char *pnpbios_encode_allocated_resource_data(struct pnp_dev return (unsigned char *)p; break; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c index 88cb740..3cbaf18 100644 --- a/drivers/ps3/ps3-sys-manager.c +++ b/drivers/ps3/ps3-sys-manager.c @@ -46,7 +46,7 @@ /** * struct ps3_sys_manager_header - System manager message header. * @version: Header version, currently 1. - * @size: Header size in bytes, curently 16. + * @size: Header size in bytes, currently 16. * @payload_size: Message payload size in bytes. * @service_id: Message type, one of enum ps3_sys_manager_service_id. * @request_tag: Unique number to identify reply. diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c index 0b6b773..539676e 100644 --- a/drivers/rtc/rtc-ds1511.c +++ b/drivers/rtc/rtc-ds1511.c @@ -2,7 +2,7 @@ * An rtc driver for the Dallas DS1511 * * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp> - * Copyright (C) 2007 Andrew Sharp <andy.sharp@onstor.com> + * Copyright (C) 2007 Andrew Sharp <andy.sharp@lsi.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -636,7 +636,7 @@ ds1511_rtc_exit(void) module_init(ds1511_rtc_init); module_exit(ds1511_rtc_exit); -MODULE_AUTHOR("Andrew Sharp <andy.sharp@onstor.com>"); +MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>"); MODULE_DESCRIPTION("Dallas DS1511 RTC driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c index 7d1547b..d491eb2 100644 --- a/drivers/rtc/rtc-stk17ta8.c +++ b/drivers/rtc/rtc-stk17ta8.c @@ -286,7 +286,7 @@ static struct bin_attribute stk17ta8_nvram_attr = { .write = stk17ta8_nvram_write, }; -static int __init stk17ta8_rtc_probe(struct platform_device *pdev) +static int __devinit stk17ta8_rtc_probe(struct platform_device *pdev) { struct rtc_device *rtc; struct resource *res; diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c index 423cd5a..ad741af 100644 --- a/drivers/rtc/rtc-v3020.c +++ b/drivers/rtc/rtc-v3020.c @@ -335,7 +335,7 @@ static int rtc_probe(struct platform_device *pdev) goto err_io; } - /* Make sure frequency measurment mode, test modes, and lock + /* Make sure frequency measurement mode, test modes, and lock * are all disabled */ v3020_set_reg(chip, V3020_STATUS_0, 0x0); diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c index 654daa3..5f23eca 100644 --- a/drivers/s390/block/dasd_proc.c +++ b/drivers/s390/block/dasd_proc.c @@ -215,7 +215,7 @@ dasd_statistics_read(char *page, char **start, off_t off, } prof = &dasd_global_profile; - /* prevent couter 'overflow' on output */ + /* prevent counter 'overflow' on output */ for (factor = 1; (prof->dasd_io_reqs / factor) > 9999999; factor *= 10); diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c index 097d384..f54b1ee 100644 --- a/drivers/s390/char/fs3270.c +++ b/drivers/s390/char/fs3270.c @@ -74,7 +74,7 @@ fs3270_do_io(struct raw3270_view *view, struct raw3270_request *rq) } rc = raw3270_start(view, rq); if (rc == 0) { - /* Started sucessfully. Now wait for completion. */ + /* Started successfully. Now wait for completion. */ wait_event(fp->wait, raw3270_request_final(rq)); } } while (rc == -EACCES); diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c index 8ab5160..c268a2e 100644 --- a/drivers/s390/cio/chp.c +++ b/drivers/s390/cio/chp.c @@ -65,7 +65,7 @@ static void set_chp_logically_online(struct chp_id chpid, int onoff) chpid_to_chp(chpid)->state = onoff; } -/* On succes return 0 if channel-path is varied offline, 1 if it is varied +/* On success return 0 if channel-path is varied offline, 1 if it is varied * online. Return -ENODEV if channel-path is not registered. */ int chp_get_status(struct chp_id chpid) { diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c index 30f5161..2985eb4 100644 --- a/drivers/s390/cio/cmf.c +++ b/drivers/s390/cio/cmf.c @@ -462,7 +462,7 @@ static struct cmb_area cmb_area = { * block of memory, which can not be moved as long as any channel * is active. Therefore, a maximum number of subchannels needs to * be defined somewhere. This is a module parameter, defaulting to - * a resonable value of 1024, or 32 kb of memory. + * a reasonable value of 1024, or 32 kb of memory. * Current kernels don't allow kmalloc with more than 128kb, so the * maximum is 4096. */ diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h index eecb2ee..de7bcce 100644 --- a/drivers/s390/net/qeth_core_mpc.h +++ b/drivers/s390/net/qeth_core_mpc.h @@ -507,7 +507,7 @@ extern unsigned char ULP_ENABLE[]; (PDU_ENCAPSULATION(buffer) + 0x17) #define QETH_ULP_ENABLE_RESP_LINK_TYPE(buffer) \ (PDU_ENCAPSULATION(buffer) + 0x2b) -/* Layer 2 defintions */ +/* Layer 2 definitions */ #define QETH_PROT_LAYER2 0x08 #define QETH_PROT_TCPIP 0x03 #define QETH_PROT_OSN2 0x0a diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c index 58e583b..aa2b60a 100644 --- a/drivers/sbus/char/envctrl.c +++ b/drivers/sbus/char/envctrl.c @@ -92,11 +92,11 @@ #define ENVCTRL_CPUTEMP_MON 1 /* cpu temperature monitor */ #define ENVCTRL_CPUVOLTAGE_MON 2 /* voltage monitor */ #define ENVCTRL_FANSTAT_MON 3 /* fan status monitor */ -#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperarture */ +#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperature */ /* monitor */ #define ENVCTRL_VOLTAGESTAT_MON 5 /* voltage status monitor */ #define ENVCTRL_MTHRBDTEMP_MON 6 /* motherboard temperature */ -#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperarture */ +#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperature */ #define ENVCTRL_GLOBALADDR_MON 8 /* global address */ /* Child device type. diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 36c21b1..b59e240 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -732,7 +732,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int break; case TW_IOCTL_GET_COMPATIBILITY_INFO: tw_ioctl->driver_command.status = 0; - /* Copy compatiblity struct into ioctl data buffer */ + /* Copy compatibility struct into ioctl data buffer */ tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer; memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info)); break; diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index faa0fcf..ff04821 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -8,7 +8,7 @@ Copyright (C) 1999-2009 3ware Inc. - Kernel compatiblity By: Andre Hedrick <andre@suse.com> + Kernel compatibility By: Andre Hedrick <andre@suse.com> Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com> Further tiny build fixes and trivial hoovering Alan Cox diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index f5a9add..07ce9bf 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -1491,7 +1491,7 @@ NCR_700_intr(int irq, void *dev_id) unsigned long flags; int handled = 0; - /* Use the host lock to serialise acess to the 53c700 + /* Use the host lock to serialise access to the 53c700 * hardware. Note: In future, we may need to take the queue * lock to enter the done routines. When that happens, we * need to ensure that for this driver, the host lock and the diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index cdbdec9..83986ed 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -526,10 +526,10 @@ struct aac_driver_ident /* * The adapter interface specs all queues to be located in the same - * physically contigous block. The host structure that defines the + * physically contiguous block. The host structure that defines the * commuication queues will assume they are each a separate physically - * contigous memory region that will support them all being one big - * contigous block. + * contiguous memory region that will support them all being one big + * contiguous block. * There is a command and response queue for each level and direction of * commuication. These regions are accessed by both the host and adapter. */ diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index d598eba..666d515 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -226,7 +226,7 @@ static int aac_comm_init(struct aac_dev * dev) spin_lock_init(&dev->fib_lock); /* - * Allocate the physically contigous space for the commuication + * Allocate the physically contiguous space for the commuication * queue headers. */ diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index b756041..22626ab 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -7969,7 +7969,7 @@ static int advansys_reset(struct scsi_cmnd *scp) ASC_DBG(1, "before AscInitAsc1000Driver()\n"); status = AscInitAsc1000Driver(asc_dvc); - /* Refer to ASC_IERR_* defintions for meaning of 'err_code'. */ + /* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */ if (asc_dvc->err_code) { scmd_printk(KERN_INFO, scp, "SCSI bus reset error: " "0x%x\n", asc_dvc->err_code); diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq index 58bc175..2fb78e3 100644 --- a/drivers/scsi/aic7xxx/aic79xx.seq +++ b/drivers/scsi/aic7xxx/aic79xx.seq @@ -217,7 +217,7 @@ BEGIN_CRITICAL; scbdma_tohost_done: test CCSCBCTL, CCARREN jz fill_qoutfifo_dmadone; /* - * An SCB has been succesfully uploaded to the host. + * An SCB has been successfully uploaded to the host. * If the SCB was uploaded for some reason other than * bad SCSI status (currently only for underruns), we * queue the SCB for normal completion. Otherwise, we @@ -1281,7 +1281,7 @@ END_CRITICAL; * Is it a disconnect message? Set a flag in the SCB to remind us * and await the bus going free. If this is an untagged transaction * store the SCB id for it in our untagged target table for lookup on - * a reselction. + * a reselection. */ mesgin_disconnect: /* diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 63b521d..4d419c1 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -2487,7 +2487,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) /* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy - * LED does. SELINGO is only cleared by a sucessfull + * LED does. SELINGO is only cleared by a successfull * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus). diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 75b2331..1222a7a 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -2335,7 +2335,7 @@ ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd) /* * The sequencer will never re-reference the * in-core SCB. To make sure we are notified - * during reslection, set the MK_MESSAGE flag in + * during reselection, set the MK_MESSAGE flag in * the card's copy of the SCB. */ ahd_outb(ahd, SCB_CONTROL, diff --git a/drivers/scsi/aic7xxx/aic7xxx.seq b/drivers/scsi/aic7xxx/aic7xxx.seq index 1519639..5a4cfc95 100644 --- a/drivers/scsi/aic7xxx/aic7xxx.seq +++ b/drivers/scsi/aic7xxx/aic7xxx.seq @@ -1693,7 +1693,7 @@ if ((ahc->flags & AHC_INITIATORROLE) != 0) { * Is it a disconnect message? Set a flag in the SCB to remind us * and await the bus going free. If this is an untagged transaction * store the SCB id for it in our untagged target table for lookup on - * a reselction. + * a reselection. */ mesgin_disconnect: /* diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c index 8dfb59d..45aa728 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_core.c +++ b/drivers/scsi/aic7xxx/aic7xxx_core.c @@ -1733,7 +1733,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat) /* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy - * LED does. SELINGO is only cleared by a sucessfull + * LED does. SELINGO is only cleared by a successfull * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus). diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index fd2b978..8cb05dc 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -2290,7 +2290,7 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag) * In the non-paging case, the sequencer will * never re-reference the in-core SCB. * To make sure we are notified during - * reslection, set the MK_MESSAGE flag in + * reselection, set the MK_MESSAGE flag in * the card's copy of the SCB. */ if ((ahc->flags & AHC_PAGESCBS) == 0) { diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h index a43e8cd..28aaf34 100644 --- a/drivers/scsi/aic94xx/aic94xx_reg_def.h +++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h @@ -1,5 +1,5 @@ /* - * Aic94xx SAS/SATA driver hardware registers defintions. + * Aic94xx SAS/SATA driver hardware registers definitions. * * Copyright (C) 2004 Adaptec, Inc. All rights reserved. * Copyright (C) 2004 David Chaw <david_chaw@adaptec.com> diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h index a000bc4..bf32041 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h @@ -61,7 +61,7 @@ enum bfa_pport_speed { * Port operational type (in sync with SNIA port type). */ enum bfa_pport_type { - BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unkown */ + BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unknown */ BFA_PPORT_TYPE_TRUNKED = 2, /* Trunked mode */ BFA_PPORT_TYPE_NPORT = 5, /* P2P with switched fabric */ BFA_PPORT_TYPE_NLPORT = 6, /* public loop */ diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h index 31881d2..ade763db 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h @@ -25,7 +25,7 @@ * Temperature sensor status values */ enum bfa_tsensor_status { - BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unkown status */ + BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unknown status */ BFA_TSENSOR_STATUS_FAULTY = 2, /* sensor is faulty */ BFA_TSENSOR_STATUS_BELOW_MIN = 3, /* temperature below mininum */ BFA_TSENSOR_STATUS_NOMINAL = 4, /* normal temperature */ diff --git a/drivers/scsi/bfa/include/protocol/ct.h b/drivers/scsi/bfa/include/protocol/ct.h index c59d663..79d16a9 100644 --- a/drivers/scsi/bfa/include/protocol/ct.h +++ b/drivers/scsi/bfa/include/protocol/ct.h @@ -82,7 +82,7 @@ enum { }; /* - * defintions for CT reason code + * definitions for CT reason code */ enum { CT_RSN_INV_CMD = 0x01, @@ -129,7 +129,7 @@ enum { }; /* - * defintions for the explanation code for all servers + * definitions for the explanation code for all servers */ enum { CT_EXP_AUTH_EXCEPTION = 0xF1, diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index cafb888..10110be 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -1883,7 +1883,7 @@ static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep) bnx2i_ep = ep->dd_data; - /* driver should not attempt connection cleanup untill TCP_CONNECT + /* driver should not attempt connection cleanup until TCP_CONNECT * completes either successfully or fails. Timeout is 9-secs, so * wait for it to complete */ diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index 075e239..6c59c02 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -1509,7 +1509,7 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb, * Try anyway? * * We could, BUT: Sometimes the TRM_S1040 misses to produce a Selection - * Timeout, a Disconnect or a Reselction IRQ, so we would be screwed! + * Timeout, a Disconnect or a Reselection IRQ, so we would be screwed! * (This is likely to be a bug in the hardware. Obviously, most people * only have one initiator per SCSI bus.) * Instead let this fail and have the timer make sure the command is diff --git a/drivers/scsi/dmx3191d.c b/drivers/scsi/dmx3191d.c index fa738ec..207352c 100644 --- a/drivers/scsi/dmx3191d.c +++ b/drivers/scsi/dmx3191d.c @@ -31,7 +31,7 @@ #include <scsi/scsi_host.h> /* - * Defintions for the generic 5380 driver. + * Definitions for the generic 5380 driver. */ #define AUTOSENSE diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index a0e7e71..5be67a6 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -834,7 +834,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba) atomic_read(&hba->resetting) == 0, 60 * HZ); if (atomic_read(&hba->resetting)) { - /* IOP is in unkown state, abort reset */ + /* IOP is in unknown state, abort reset */ printk(KERN_ERR "scsi%d: reset failed\n", hba->host->host_no); return -1; } diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index bd2f771..6486ae4 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -56,7 +56,7 @@ * at the same time. * * When discovery succeeds or fails a callback is made to the lport as - * notification. Currently, succesful discovery causes the lport to take no + * notification. Currently, successful discovery causes the lport to take no * action. A failure will cause the lport to reset. There is likely a circular * locking problem with this implementation. */ diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 2e0746d..ca25ee5 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -1004,7 +1004,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) * iscsi_tcp_task_xmit - xmit normal PDU task * @task: iscsi command task * - * We're expected to return 0 when everything was transmitted succesfully, + * We're expected to return 0 when everything was transmitted successfully, * -EAGAIN if there's still data in the queue, or != 0 for any other kind * of error. */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index e1a30a1..9bd19aa 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -654,7 +654,7 @@ lpfc_selective_reset(struct lpfc_hba *phba) * Notes: * Assumes any error from lpfc_selective_reset() will be negative. * If lpfc_selective_reset() returns zero then the length of the buffer - * is returned which indicates succcess + * is returned which indicates success * * Returns: * -EINVAL if the buffer does not contain the string "selective" @@ -3147,7 +3147,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, * sysfs_ctlreg_read - Read method for reading from ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. - * @buf: if succesful contains the data from the adapter IOREG space. + * @buf: if successful contains the data from the adapter IOREG space. * @off: offset into buffer to beginning of data. * @count: bytes to transfer. * diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 45337cd..a14ab45 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -802,7 +802,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* FLOGI completes successfully */ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS, - "0101 FLOGI completes sucessfully " + "0101 FLOGI completes successfully " "Data: x%x x%x x%x x%x\n", irsp->un.ulpWord[4], sp->cmn.e_d_tov, sp->cmn.w2.r_a_tov, sp->cmn.edtovResolution); @@ -4133,7 +4133,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, /* Indicate we are walking fc_rscn_id_list on this vport */ vport->fc_rscn_flush = 1; spin_unlock_irq(shost->host_lock); - /* Get the array count after sucessfully have the token */ + /* Get the array count after successfully have the token */ rscn_cnt = vport->fc_rscn_id_cnt; /* If we are already processing an RSCN, save the received * RSCN payload buffer, cmdiocb->context2 to process later. diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 562d8ce..82f8ab5 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -645,7 +645,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba) * down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ static int @@ -700,7 +700,7 @@ lpfc_hba_down_post_s3(struct lpfc_hba *phba) * down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ static int @@ -755,7 +755,7 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba) * uninitialization after the HBA is reset when bring down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ int @@ -1254,7 +1254,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba) * routine from the API jump table function pointer from the lpfc_hba struct. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ void @@ -3124,7 +3124,7 @@ static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode) * PCI devices. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3220,7 +3220,7 @@ lpfc_reset_hba(struct lpfc_hba *phba) * support the SLI-3 HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3321,7 +3321,7 @@ lpfc_sli_driver_resource_unset(struct lpfc_hba *phba) * support the SLI-4 HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3642,7 +3642,7 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) * device specific resource setup to support the HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3688,7 +3688,7 @@ lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba) * device specific resource setup to support the HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3753,7 +3753,7 @@ lpfc_free_iocb_list(struct lpfc_hba *phba) * list and set up the IOCB tag array accordingly. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3872,7 +3872,7 @@ lpfc_free_active_sgl(struct lpfc_hba *phba) * list and set up the sgl xritag tag array accordingly. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3986,7 +3986,7 @@ out_free_mem: * enabled and the driver is reinitializing the device. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4146,7 +4146,7 @@ lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba) * PCI device data structure is set. * * Return codes - * pointer to @phba - sucessful + * pointer to @phba - successful * NULL - error **/ static struct lpfc_hba * @@ -4202,7 +4202,7 @@ lpfc_hba_free(struct lpfc_hba *phba) * host with it. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -4365,7 +4365,7 @@ lpfc_post_init_setup(struct lpfc_hba *phba) * with SLI-3 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -4662,7 +4662,7 @@ lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf) * this routine. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - could not allocated memory. **/ static int @@ -4761,7 +4761,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba) * allocation for the port. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4861,7 +4861,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) * HBA consistent with the SLI-4 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4910,7 +4910,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba) * we just use some constant number as place holder. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5218,7 +5218,7 @@ out_error: * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5286,7 +5286,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba) * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5552,7 +5552,7 @@ out_error: * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5599,7 +5599,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba) * Later, this can be used for all the slow-path events. * * Return codes - * 0 - sucessful + * 0 - successful * -ENOMEM - No availble memory **/ static int @@ -5760,7 +5760,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba) * all resources assigned to the PCI function which originates this request. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5923,7 +5923,7 @@ lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi) * with SLI-4 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6052,7 +6052,7 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba) * will be left with MSI-X enabled and leaks its vectors. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6184,7 +6184,7 @@ lpfc_sli_disable_msix(struct lpfc_hba *phba) * is done in this function. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error */ static int @@ -6243,7 +6243,7 @@ lpfc_sli_disable_msi(struct lpfc_hba *phba) * MSI-X -> MSI -> IRQ. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static uint32_t @@ -6333,7 +6333,7 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba) * enabled and leaks its vectors. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6443,7 +6443,7 @@ lpfc_sli4_disable_msix(struct lpfc_hba *phba) * which is done in this function. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6508,7 +6508,7 @@ lpfc_sli4_disable_msi(struct lpfc_hba *phba) * MSI-X -> MSI -> IRQ. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static uint32_t diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 43cbe33..42d4f3d 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1794,7 +1794,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) */ if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) == MBX_SHUTDOWN) { - /* Unknow mailbox command compl */ + /* Unknown mailbox command compl */ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "(%d):0323 Unknown Mailbox command " "x%x (x%x) Cmpl\n", @@ -4163,7 +4163,7 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba, * addition, this routine gets the port vpd data. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - could not allocated memory. **/ static int @@ -11091,7 +11091,7 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba) * sequential. * * Return codes - * 0 - sucessful + * 0 - successful * EIO - The mailbox failed to complete successfully. * When this error occurs, the driver is not guaranteed * to have any rpi regions posted to the device and @@ -11129,7 +11129,7 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba) * maps up to 64 rpi context regions. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No available memory * EIO - The mailbox failed to complete successfully. **/ @@ -11191,7 +11191,7 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) * PAGE_SIZE modulo 64 rpi context headers. * * Returns - * A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful + * A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful * LPFC_RPI_ALLOC_ERROR if no rpis are available. **/ int diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index 512c2cc..d310f49 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -381,7 +381,7 @@ typedef struct { u8 battery_status; /* * BIT 0: battery module missing * BIT 1: VBAD - * BIT 2: temprature high + * BIT 2: temperature high * BIT 3: battery pack missing * BIT 4,5: * 00 - charge complete diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h index b25b747..ce2487a 100644 --- a/drivers/scsi/megaraid/mbox_defs.h +++ b/drivers/scsi/megaraid/mbox_defs.h @@ -497,7 +497,7 @@ typedef struct { * @inserted_drive : channel:Id of inserted drive * @battery_status : bit 0: battery module missing * bit 1: VBAD - * bit 2: temprature high + * bit 2: temperature high * bit 3: battery pack missing * bit 4,5: * 00 - charge complete diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 234f0b7..f9ae803 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -2704,7 +2704,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp) } else { con_log(CL_ANN, (KERN_NOTICE - "megaraid mbox: reset sequence completed sucessfully\n")); + "megaraid mbox: reset sequence completed successfully\n")); } diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 86ab32d..756e509d 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2894,7 +2894,7 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data) #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** - * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request + * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request * @ioc: per adapter object * @scmd: pointer to scsi command object * @mpi_reply: reply mf payload returned from firmware diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index e3c482a..a2d5698 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -6495,7 +6495,7 @@ static void ncr_int_ma (struct ncb *np) ** we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids ** bloat for such a should_not_happen situation). ** In all other situation, we reset the BUS. - ** Are these assumptions reasonnable ? (Wait and see ...) + ** Are these assumptions reasonable ? (Wait and see ...) */ unexpected_phase: dsp -= 8; diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index 2be7d5b..2c98a6e 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -1419,7 +1419,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id) nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! "); /* * TODO: To be implemented improving bus master - * transfer reliablity when BMCNTERR is occurred in + * transfer reliability when BMCNTERR is occurred in * AutoSCSI phase described in specification. */ } diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index 0a97bc9..0e24abd 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -3342,7 +3342,7 @@ static int pmcraid_chr_fasync(int fd, struct file *filep, int mode) * @direction : data transfer direction * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static int pmcraid_build_passthrough_ioadls( struct pmcraid_cmd *cmd, @@ -3401,7 +3401,7 @@ static int pmcraid_build_passthrough_ioadls( * @direction: data transfer direction * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static void pmcraid_release_passthrough_ioadls( struct pmcraid_cmd *cmd, @@ -3429,7 +3429,7 @@ static void pmcraid_release_passthrough_ioadls( * @arg: pointer to pmcraid_passthrough_buffer user buffer * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static long pmcraid_ioctl_passthrough( struct pmcraid_instance *pinstance, diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index 3441b3f..2752b56 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -771,11 +771,11 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = { {0x01180600, IOASC_LOG_LEVEL_MUST, "Recovered Error, soft media error, sector reassignment suggested"}, {0x015D0000, IOASC_LOG_LEVEL_MUST, - "Recovered Error, failure prediction thresold exceeded"}, + "Recovered Error, failure prediction threshold exceeded"}, {0x015D9200, IOASC_LOG_LEVEL_MUST, - "Recovered Error, soft Cache Card Battery error thresold"}, + "Recovered Error, soft Cache Card Battery error threshold"}, {0x015D9200, IOASC_LOG_LEVEL_MUST, - "Recovered Error, soft Cache Card Battery error thresold"}, + "Recovered Error, soft Cache Card Battery error threshold"}, {0x02048000, IOASC_LOG_LEVEL_MUST, "Not Ready, IOA Reset Required"}, {0x02408500, IOASC_LOG_LEVEL_MUST, diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index 723fdec..0fd6ae6 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -613,7 +613,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_send_transport_msg); * @data_buf: pointer to vendor unique data buffer * * Returns: - * 0 on succesful return + * 0 on successful return * otherwise, failing error code * * Notes: diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index fd47cb1..f27e52d 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -666,7 +666,7 @@ EXPORT_SYMBOL(sas_phy_add); * * Note: * This function must only be called on a PHY that has not - * sucessfully been added using sas_phy_add(). + * successfully been added using sas_phy_add(). */ void sas_phy_free(struct sas_phy *phy) { @@ -896,7 +896,7 @@ EXPORT_SYMBOL(sas_port_add); * * Note: * This function must only be called on a PORT that has not - * sucessfully been added using sas_port_add(). + * successfully been added using sas_port_add(). */ void sas_port_free(struct sas_port *port) { @@ -1476,7 +1476,7 @@ EXPORT_SYMBOL(sas_rphy_add); * * Note: * This function must only be called on a remote - * PHY that has not sucessfully been added using + * PHY that has not successfully been added using * sas_rphy_add() (or has been sas_rphy_remove()'d) */ void sas_rphy_free(struct sas_rphy *rphy) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 45374d6..2b38f6a 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev) * * This routine is similar to sym_set_workarounds(), except * that, at this point, we already know that the device was - * succesfully intialized at least once before, and so most + * successfully intialized at least once before, and so most * of the steps taken there are un-needed here. */ static void sym2_reset_workarounds(struct pci_dev *pdev) diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 297deb8..a7bc8b7 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -2692,7 +2692,7 @@ static void sym_int_ma (struct sym_hcb *np) * we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids * bloat for such a should_not_happen situation). * In all other situation, we reset the BUS. - * Are these assumptions reasonnable ? (Wait and see ...) + * Are these assumptions reasonable ? (Wait and see ...) */ unexpected_phase: dsp -= 8; diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 053e63c..5a80cba 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -54,7 +54,7 @@ * * SYM_OPT_LIMIT_COMMAND_REORDERING * When this option is set, the driver tries to limit tagged - * command reordering to some reasonnable value. + * command reordering to some reasonable value. * (set for Linux) */ #if 0 diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c index 093610b..2f6e9d8 100644 --- a/drivers/scsi/wd7000.c +++ b/drivers/scsi/wd7000.c @@ -161,7 +161,7 @@ * * 2003/02/12 - Christoph Hellwig <hch@infradead.org> * - * Cleaned up host template defintion + * Cleaned up host template definition * Removed now obsolete wd7000.h */ diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index d71dfe3..36ede02 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -361,9 +361,9 @@ static const struct pnp_device_id pnp_dev_table[] = { { "LTS0001", 0 }, /* Rockwell's (PORALiNK) 33600 INT PNP */ { "WCI0003", 0 }, - /* Unkown PnP modems */ + /* Unknown PnP modems */ { "PNPCXXX", UNKNOWN_DEV }, - /* More unkown PnP modems */ + /* More unknown PnP modems */ { "PNPDXXX", UNKNOWN_DEV }, { "", 0 } }; diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h index 570b0d9..f6e77f1 100644 --- a/drivers/serial/pmac_zilog.h +++ b/drivers/serial/pmac_zilog.h @@ -73,7 +73,7 @@ static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap) } /* - * Register acessors. Note that we don't need to enforce a recovery + * Register accessors. Note that we don't need to enforce a recovery * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip, * though if we try to use this driver on older machines, we might have * to add it back diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index 0c08f28..46de564 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -313,7 +313,7 @@ static void qe_uart_stop_tx(struct uart_port *port) * This function will attempt to stuff of all the characters from the * kernel's transmit buffer into TX BDs. * - * A return value of non-zero indicates that it sucessfully stuffed all + * A return value of non-zero indicates that it successfully stuffed all * characters from the kernel buffer. * * A return value of zero indicates that there are still characters in the diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 5d23983..d9b4100 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -42,7 +42,7 @@ * This supports acccess to SPI devices using normal userspace I/O calls. * Note that while traditional UNIX/POSIX I/O semantics are half duplex, * and often mask message boundaries, full SPI support requires full duplex - * transfers. There are several kinds of of internal message boundaries to + * transfers. There are several kinds of internal message boundaries to * handle chipselect management and other protocol options. * * SPI has a character major number assigned. We allocate minor numbers diff --git a/drivers/staging/otus/80211core/pub_zfi.h b/drivers/staging/otus/80211core/pub_zfi.h index a35bd5d..60b7d1c 100644 --- a/drivers/staging/otus/80211core/pub_zfi.h +++ b/drivers/staging/otus/80211core/pub_zfi.h @@ -20,7 +20,7 @@ #include "../oal_dt.h" /***** Section 1 : Tunable Parameters *****/ -/* The defintions in this section are tunabel parameters */ +/* The definitions in this section are tunabel parameters */ /* Maximum number of BSS that could be scaned */ #define ZM_MAX_BSS 128 diff --git a/drivers/staging/otus/zdcompat.h b/drivers/staging/otus/zdcompat.h index 84ac433..cdcaef5 100644 --- a/drivers/staging/otus/zdcompat.h +++ b/drivers/staging/otus/zdcompat.h @@ -17,7 +17,7 @@ /* Module Name : zdcompat.h */ /* */ /* Abstract */ -/* This module contains function defintion for compatibility. */ +/* This module contains function definition for compatibility. */ /* */ /* NOTES */ /* Platform dependent. */ diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h index 8216d7e..35ed60b 100644 --- a/drivers/staging/rtl8187se/r8180.h +++ b/drivers/staging/rtl8187se/r8180.h @@ -521,7 +521,7 @@ typedef struct r8180_priv //u32 NumTxOkInPeriod; //YJ,del,080828 u8 TxPollingTimes; - bool bApBufOurFrame;// TRUE if AP buffer our unicast data , we will keep eAwake untill receive data or timeout. + bool bApBufOurFrame;// TRUE if AP buffer our unicast data , we will keep eAwake until receive data or timeout. u8 WaitBufDataBcnCount; u8 WaitBufDataTimeOut; diff --git a/drivers/staging/rtl8192su/r8192S_phyreg.h b/drivers/staging/rtl8192su/r8192S_phyreg.h index 96c7cfa..acf644f 100644 --- a/drivers/staging/rtl8192su/r8192S_phyreg.h +++ b/drivers/staging/rtl8192su/r8192S_phyreg.h @@ -38,7 +38,7 @@ // 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 // 3. RF register 0x00-2E // 4. Bit Mask for BB/RF register -// 5. Other defintion for BB/RF R/W +// 5. Other definition for BB/RF R/W // diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c index 40de151..e89304c 100644 --- a/drivers/telephony/ixj.c +++ b/drivers/telephony/ixj.c @@ -4190,7 +4190,7 @@ static void ixj_aec_start(IXJ *j, int level) ixj_WriteDSPCommand(0x1224, j); ixj_WriteDSPCommand(0xE014, j); - ixj_WriteDSPCommand(0x0003, j); /* Lock threashold at 3dB */ + ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */ ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */ @@ -4235,7 +4235,7 @@ static void ixj_aec_start(IXJ *j, int level) ixj_WriteDSPCommand(0x1224, j); ixj_WriteDSPCommand(0xE014, j); - ixj_WriteDSPCommand(0x0003, j); /* Lock threashold at 3dB */ + ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */ ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */ diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index d171b56..bba4d3e 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1958,7 +1958,7 @@ static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr) goto bad1; /* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to - * the first MEMACESS cmv. Ignore it... + * the first MEMACCESS cmv. Ignore it... */ if (cmv->bFunction != dsc->function) { if (UEA_CHIP_VERSION(sc) == ADI930 diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 2473cf0..b4bd241 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -1,5 +1,5 @@ /** - * drivers/usb/class/usbtmc.c - USB Test & Measurment class driver + * drivers/usb/class/usbtmc.c - USB Test & Measurement class driver * * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany * Copyright (C) 2008 Novell, Inc. diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index da718e8..e80f1af 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1890,7 +1890,7 @@ static void cancel_async_set_config(struct usb_device *udev) * routine gets around the normal restrictions by using a work thread to * submit the change-config request. * - * Returns 0 if the request was succesfully queued, error code otherwise. + * Returns 0 if the request was successfully queued, error code otherwise. * The caller has no way to know whether the queued request will eventually * succeed. */ diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index 7953948..4e36578 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -432,7 +432,7 @@ static void acm_disable(struct usb_function *f) * @length: size of data * Context: irqs blocked, acm->lock held, acm_notify_req non-null * - * Returns zero on sucess or a negative errno. + * Returns zero on success or a negative errno. * * See section 6.3.5 of the CDC 1.1 specification for information * about the only notification we issue: SerialState change. diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 1937d8c..adda120 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1524,7 +1524,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget) * pxa_udc_wakeup - Force udc device out of suspend * @_gadget: usb gadget * - * Returns 0 if succesfull, error code otherwise + * Returns 0 if successfull, error code otherwise */ static int pxa_udc_wakeup(struct usb_gadget *_gadget) { diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f5f5601..d8f4aaa 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -210,7 +210,7 @@ static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, if (error) { ehci_halt(ehci); ehci_to_hcd(ehci)->state = HC_STATE_HALT; - ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n", + ehci_err(ehci, "force halt; handshake %p %08x %08x -> %d\n", ptr, mask, done, error); } diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index 62a226b..00a2985 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -627,7 +627,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd) /* - * Process normal completions(error or sucess) and clean the schedule. + * Process normal completions(error or success) and clean the schedule. * * This is the main path for handing urbs back to drivers. The only other patth * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c index 9ec7fd5..9579cf4 100644 --- a/drivers/usb/wusbcore/crypto.c +++ b/drivers/usb/wusbcore/crypto.c @@ -111,7 +111,7 @@ struct aes_ccm_b1 { * * CCM uses Ax blocks to generate a keystream with which the MIC and * the message's payload are encoded. A0 always encrypts/decrypts the - * MIC. Ax (x>0) are used for the sucesive payload blocks. + * MIC. Ax (x>0) are used for the successive payload blocks. * * The x is the counter, and is increased for each block. */ diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 613a5fc..489b478 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -558,7 +558,7 @@ static void wa_seg_dto_cb(struct urb *urb) /* * Callback for the segment request * - * If succesful transition state (unless already transitioned or + * If successful transition state (unless already transitioned or * outbound transfer); otherwise, take a note of the error, mark this * segment done and try completion. * @@ -1364,7 +1364,7 @@ segment_aborted: /* * Callback for the IN data phase * - * If succesful transition state; otherwise, take a note of the + * If successful transition state; otherwise, take a note of the * error, mark this segment done and try completion. * * Note we don't access until we are sure that the transfer hasn't diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c index c7080d4..0bb665a 100644 --- a/drivers/uwb/i1480/dfu/usb.c +++ b/drivers/uwb/i1480/dfu/usb.c @@ -229,7 +229,7 @@ void i1480_usb_neep_cb(struct urb *urb) * will verify it. * * Set i1480->evt_result with the result of getting the event or its - * size (if succesful). + * size (if successful). * * Delivers the data directly to i1480->evt_buf */ diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c index 0af8916..78510a1 100644 --- a/drivers/uwb/neh.c +++ b/drivers/uwb/neh.c @@ -150,7 +150,7 @@ void uwb_rc_neh_put(struct uwb_rc_neh *neh) * 0xff is invalid, so they must not be used. Initialization * fills up those two in the bitmap so they are not allocated. * - * We spread the allocation around to reduce the posiblity of two + * We spread the allocation around to reduce the possibility of two * consecutive opened @neh's getting the same context ID assigned (to * avoid surprises with late events that timed out long time ago). So * first we search from where @rc->ctx_roll is, if not found, we diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c index 86a853b..7350ed6 100644 --- a/drivers/uwb/wlp/txrx.c +++ b/drivers/uwb/wlp/txrx.c @@ -282,7 +282,7 @@ EXPORT_SYMBOL_GPL(wlp_receive_frame); * and transmission will be done by the calling function. * @dst: On return this will contain the device address to which the * frame is destined. - * @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer, + * @returns: 0 on success no tx : WLP header successfully applied to skb buffer, * calling function can proceed with tx * 1 on success with tx : WLP will take over transmission of this * frame diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index d5e8010..3d886c6 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -964,7 +964,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) if (sinfo->atmel_lcdfb_power_control) sinfo->atmel_lcdfb_power_control(1); - dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n", + dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n", info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base); return 0; diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 913b4a4..1ddeb4c 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -3276,7 +3276,7 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) txtformat = "24 bit interface"; break; default: - txtformat = "unkown format"; + txtformat = "unknown format"; } } else { switch (format & 7) { @@ -3299,7 +3299,7 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) txtformat = "262144 colours (FDPI-2 mode)"; break; default: - txtformat = "unkown format"; + txtformat = "unknown format"; } } PRINTKI("%s%s %s monitor detected: %s\n", diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c index 505c082..2cf7ba5 100644 --- a/drivers/video/backlight/atmel-pwm-bl.c +++ b/drivers/video/backlight/atmel-pwm-bl.c @@ -158,7 +158,7 @@ static int atmel_pwm_bl_probe(struct platform_device *pdev) goto err_free_pwm; } - /* Turn display off by defatult. */ + /* Turn display off by default. */ retval = gpio_direction_output(pwmbl->gpio_on, 0 ^ pdata->on_active_low); if (retval) diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c index 50ec17d..fa32b94 100644 --- a/drivers/video/backlight/tosa_lcd.c +++ b/drivers/video/backlight/tosa_lcd.c @@ -177,7 +177,7 @@ static int __devinit tosa_lcd_probe(struct spi_device *spi) if (!data) return -ENOMEM; - data->is_vga = true; /* defaut to VGA mode */ + data->is_vga = true; /* default to VGA mode */ /* * bits_per_word cannot be configured in platform data diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c index 857b366..6468a29 100644 --- a/drivers/video/console/sticore.c +++ b/drivers/video/console/sticore.c @@ -436,7 +436,7 @@ sti_init_glob_cfg(struct sti_struct *sti, (offs < PCI_BASE_ADDRESS_0 || offs > PCI_BASE_ADDRESS_5)) { printk (KERN_WARNING - "STI pci region maping for region %d (%02x) can't be mapped\n", + "STI pci region mapping for region %d (%02x) can't be mapped\n", i,sti->rm_entry[i]); continue; } diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c index c27ab1e..e59c083 100644 --- a/drivers/video/fb_defio.c +++ b/drivers/video/fb_defio.c @@ -71,7 +71,7 @@ int fb_deferred_io_fsync(struct file *file, struct dentry *dentry, int datasync) { struct fb_info *info = file->private_data; - /* Skip if deferred io is complied-in but disabled on this fbdev */ + /* Skip if deferred io is compiled-in but disabled on this fbdev */ if (!info->fbdefio) return 0; diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index f67db42..695fa01 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -701,7 +701,7 @@ static int gbefb_set_par(struct fb_info *info) blocks of 512x128, 256x128 or 128x128 pixels, respectively for 8bit, 16bit and 32 bit modes (64 kB). They cover the screen with partial tiles on the right and/or bottom of the screen if needed. - For exemple in 640x480 8 bit mode the mapping is: + For example in 640x480 8 bit mode the mapping is: <-------- 640 -----> <---- 512 ----><128|384 offscreen> diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c index 1f74399..319a9a2 100644 --- a/drivers/video/omap/lcd_ams_delta.c +++ b/drivers/video/omap/lcd_ams_delta.c @@ -123,12 +123,12 @@ struct platform_driver ams_delta_panel_driver = { }, }; -static int ams_delta_panel_drv_init(void) +static int __init ams_delta_panel_drv_init(void) { return platform_driver_register(&ams_delta_panel_driver); } -static void ams_delta_panel_drv_cleanup(void) +static void __exit ams_delta_panel_drv_cleanup(void) { platform_driver_unregister(&ams_delta_panel_driver); } diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c index 918ee89..d88a792 100644 --- a/drivers/video/omap/lcd_mipid.c +++ b/drivers/video/omap/lcd_mipid.c @@ -607,7 +607,7 @@ static struct spi_driver mipid_spi_driver = { .remove = __devexit_p(mipid_spi_remove), }; -static int mipid_drv_init(void) +static int __init mipid_drv_init(void) { spi_register_driver(&mipid_spi_driver); @@ -615,7 +615,7 @@ static int mipid_drv_init(void) } module_init(mipid_drv_init); -static void mipid_drv_cleanup(void) +static void __exit mipid_drv_cleanup(void) { spi_unregister_driver(&mipid_spi_driver); } diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c index bba5371..f8601223 100644 --- a/drivers/video/sgivwfb.c +++ b/drivers/video/sgivwfb.c @@ -260,13 +260,13 @@ static int sgivwfb_check_var(struct fb_var_screeninfo *var, var->grayscale = 0; /* No grayscale for now */ /* determine valid resolution and timing */ - for (min_mode = 0; min_mode < DBE_VT_SIZE; min_mode++) { + for (min_mode = 0; min_mode < ARRAY_SIZE(dbeVTimings); min_mode++) { if (dbeVTimings[min_mode].width >= var->xres && dbeVTimings[min_mode].height >= var->yres) break; } - if (min_mode == DBE_VT_SIZE) + if (min_mode == ARRAY_SIZE(dbeVTimings)) return -EINVAL; /* Resolution to high */ /* XXX FIXME - should try to pick best refresh rate */ diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c index 6120f0c..876648e 100644 --- a/drivers/video/stifb.c +++ b/drivers/video/stifb.c @@ -756,9 +756,9 @@ hyperResetPlanes(struct stifb_info *fb, int enable) if (fb->info.var.bits_per_pixel == 32) controlPlaneReg = 0x04000F00; else - controlPlaneReg = 0x00000F00; /* 0x00000800 should be enought, but lets clear all 4 bits */ + controlPlaneReg = 0x00000F00; /* 0x00000800 should be enough, but lets clear all 4 bits */ else - controlPlaneReg = 0x00000F00; /* 0x00000100 should be enought, but lets clear all 4 bits */ + controlPlaneReg = 0x00000F00; /* 0x00000100 should be enough, but lets clear all 4 bits */ switch (enable) { case ENABLE: diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c index ff43c88..9805483 100644 --- a/drivers/video/tdfxfb.c +++ b/drivers/video/tdfxfb.c @@ -52,7 +52,7 @@ * * 0.1.3 (released 1999-11-02) added Attila's panning support, code * reorg, hwcursor address page size alignment - * (for mmaping both frame buffer and regs), + * (for mmapping both frame buffer and regs), * and my changes to get rid of hardcoded * VGA i/o register locations (uses PCI * configuration info now) diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c index c5c32b6..67b3693 100644 --- a/drivers/video/via/dvi.c +++ b/drivers/video/via/dvi.c @@ -467,7 +467,7 @@ static int dvi_get_panel_size_from_DDCv1(void) default: viaparinfo->tmds_setting_info->dvi_panel_size = VIA_RES_1024X768; - DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d !\ + DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d !\ set default panel size.\n", max_h); break; } @@ -534,7 +534,7 @@ static int dvi_get_panel_size_from_DDCv2(void) default: viaparinfo->tmds_setting_info->dvi_panel_size = VIA_RES_1024X768; - DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d!\ + DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d!\ set default panel size.\n", HSize); break; } diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c index 3df17dc..65ccd21 100644 --- a/drivers/video/vt8623fb.c +++ b/drivers/video/vt8623fb.c @@ -446,7 +446,7 @@ static int vt8623fb_set_par(struct fb_info *info) svga_wseq_mask(0x1E, 0xF0, 0xF0); // DI/DVP bus svga_wseq_mask(0x2A, 0x0F, 0x0F); // DI/DVP bus - svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read treshold + svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read threshold vga_wseq(NULL, 0x17, 0x1F); // FIFO depth vga_wseq(NULL, 0x18, 0x4E); svga_wseq_mask(0x1A, 0x08, 0x08); // enable MMIO ? diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c index 381026c..923cc68 100644 --- a/drivers/watchdog/coh901327_wdt.c +++ b/drivers/watchdog/coh901327_wdt.c @@ -508,7 +508,7 @@ void coh901327_watchdog_reset(void) * deactivating the watchdog before it is shut down by it. * * NOTE: on future versions of the watchdog, this restriction is - * gone: the watchdog will be reloaded with a defaul value (1 min) + * gone: the watchdog will be reloaded with a default value (1 min) * instead of last value, and you can conveniently set the watchdog * timeout to 10ms (value = 1) without any problems. */ diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c index b6b3f59..47d7197 100644 --- a/drivers/watchdog/machzwd.c +++ b/drivers/watchdog/machzwd.c @@ -21,7 +21,7 @@ * wd#1 - 2 seconds; * wd#2 - 7.2 ms; * After the expiration of wd#1, it can generate a NMI, SCI, SMI, or - * a system RESET and it starts wd#2 that unconditionaly will RESET + * a system RESET and it starts wd#2 that unconditionally will RESET * the system when the counter reaches zero. * * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index 9748eed..c8eadd4 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -1,7 +1,7 @@ /* * Watchdog driver for SiByte SB1 SoCs * - * Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@onstor.com> + * Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@lsi.com> * * This driver is intended to make the second of two hardware watchdogs * on the Sibyte 12XX and 11XX SoCs available to the user. There are two @@ -326,7 +326,7 @@ static void __exit sbwdog_exit(void) module_init(sbwdog_init); module_exit(sbwdog_exit); -MODULE_AUTHOR("Andrew Sharp <andy.sharp@onstor.com>"); +MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>"); MODULE_DESCRIPTION("SiByte Watchdog"); module_param(timeout, ulong, 0); diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index 3bde56b..5bfb1f2 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -542,7 +542,7 @@ static struct notifier_block wdrtas_notifier = { /** * wdrtas_get_tokens - reads in RTAS tokens * - * returns 0 on succes, <0 on failure + * returns 0 on success, <0 on failure * * wdrtas_get_tokens reads in the tokens for the RTAS calls used in * this watchdog driver. It tolerates, if "get-sensor-state" and @@ -598,7 +598,7 @@ static void wdrtas_unregister_devs(void) /** * wdrtas_register_devs - registers the misc dev handlers * - * returns 0 on succes, <0 on failure + * returns 0 on success, <0 on failure * * wdrtas_register_devs registers the watchdog and temperature watchdog * misc devs @@ -630,7 +630,7 @@ static int wdrtas_register_devs(void) /** * wdrtas_init - init function of the watchdog driver * - * returns 0 on succes, <0 on failure + * returns 0 on success, <0 on failure * * registers the file handlers and the reboot notifier */ |
