diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/block/swim3.c | 39 | ||||
| -rw-r--r-- | drivers/ide/pmac.c | 92 | ||||
| -rw-r--r-- | drivers/macintosh/mediabay.c | 328 |
3 files changed, 195 insertions, 264 deletions
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c index 6380ad8..59ca2b7 100644 --- a/drivers/block/swim3.c +++ b/drivers/block/swim3.c @@ -200,7 +200,7 @@ struct floppy_state { int ejected; wait_queue_head_t wait; int wanted; - struct device_node* media_bay; /* NULL when not in bay */ + struct macio_dev *mdev; char dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)]; }; @@ -303,14 +303,13 @@ static int swim3_readbit(struct floppy_state *fs, int bit) static void do_fd_request(struct request_queue * q) { int i; - for(i=0;i<floppy_count;i++) - { -#ifdef CONFIG_PMAC_MEDIABAY - if (floppy_states[i].media_bay && - check_media_bay(floppy_states[i].media_bay, MB_FD)) + + for(i=0; i<floppy_count; i++) { + struct floppy_state *fs = &floppy_states[i]; + if (fs->mdev->media_bay && + check_media_bay(fs->mdev->media_bay) != MB_FD) continue; -#endif /* CONFIG_PMAC_MEDIABAY */ - start_request(&floppy_states[i]); + start_request(fs); } } @@ -849,10 +848,9 @@ static int floppy_ioctl(struct block_device *bdev, fmode_t mode, if ((cmd & 0x80) && !capable(CAP_SYS_ADMIN)) return -EPERM; -#ifdef CONFIG_PMAC_MEDIABAY - if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD)) + if (fs->mdev->media_bay && + check_media_bay(fs->mdev->media_bay) != MB_FD) return -ENXIO; -#endif switch (cmd) { case FDEJECT: @@ -876,10 +874,9 @@ static int floppy_open(struct block_device *bdev, fmode_t mode) int n, err = 0; if (fs->ref_count == 0) { -#ifdef CONFIG_PMAC_MEDIABAY - if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD)) + if (fs->mdev->media_bay && + check_media_bay(fs->mdev->media_bay) != MB_FD) return -ENXIO; -#endif out_8(&sw->setup, S_IBM_DRIVE | S_FCLK_DIV2); out_8(&sw->control_bic, 0xff); out_8(&sw->mode, 0x95); @@ -963,10 +960,9 @@ static int floppy_revalidate(struct gendisk *disk) struct swim3 __iomem *sw; int ret, n; -#ifdef CONFIG_PMAC_MEDIABAY - if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD)) + if (fs->mdev->media_bay && + check_media_bay(fs->mdev->media_bay) != MB_FD) return -ENXIO; -#endif sw = fs->swim3; grab_drive(fs, revalidating, 0); @@ -1009,7 +1005,6 @@ static const struct block_device_operations floppy_fops = { static int swim3_add_device(struct macio_dev *mdev, int index) { struct device_node *swim = mdev->ofdev.node; - struct device_node *mediabay; struct floppy_state *fs = &floppy_states[index]; int rc = -EBUSY; @@ -1036,9 +1031,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index) } dev_set_drvdata(&mdev->ofdev.dev, fs); - mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ? - swim->parent : NULL; - if (mediabay == NULL) + if (mdev->media_bay == NULL) pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1); memset(fs, 0, sizeof(*fs)); @@ -1068,7 +1061,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index) fs->secpercyl = 36; fs->secpertrack = 18; fs->total_secs = 2880; - fs->media_bay = mediabay; + fs->mdev = mdev; init_waitqueue_head(&fs->wait); fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space); @@ -1093,7 +1086,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index) init_timer(&fs->timeout); printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count, - mediabay ? "in media bay" : ""); + mdev->media_bay ? "in media bay" : ""); return 0; diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 97642a7a..7a4e788 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -43,10 +43,7 @@ #include <asm/pmac_feature.h> #include <asm/sections.h> #include <asm/irq.h> - -#ifndef CONFIG_PPC64 #include <asm/mediabay.h> -#endif #define DRV_NAME "ide-pmac" @@ -59,13 +56,14 @@ typedef struct pmac_ide_hwif { int irq; int kind; int aapl_bus_id; - unsigned mediabay : 1; unsigned broken_dma : 1; unsigned broken_dma_warn : 1; struct device_node* node; struct macio_dev *mdev; u32 timings[4]; volatile u32 __iomem * *kauai_fcr; + ide_hwif_t *hwif; + /* Those fields are duplicating what is in hwif. We currently * can't use the hwif ones because of some assumptions that are * beeing done by the generic code about the kind of dma controller @@ -854,6 +852,11 @@ sanitize_timings(pmac_ide_hwif_t *pmif) pmif->timings[2] = pmif->timings[3] = value2; } +static int on_media_bay(pmac_ide_hwif_t *pmif) +{ + return pmif->mdev && pmif->mdev->media_bay != NULL; +} + /* Suspend call back, should be called after the child devices * have actually been suspended */ @@ -866,7 +869,7 @@ static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif) disable_irq(pmif->irq); /* The media bay will handle itself just fine */ - if (pmif->mediabay) + if (on_media_bay(pmif)) return 0; /* Kauai has bus control FCRs directly here */ @@ -889,7 +892,7 @@ static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif) static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif) { /* Hard reset & re-enable controller (do we really need to reset ? -BenH) */ - if (!pmif->mediabay) { + if (!on_media_bay(pmif)) { ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1); ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1); msleep(10); @@ -950,13 +953,11 @@ static void pmac_ide_init_dev(ide_drive_t *drive) pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - if (pmif->mediabay) { -#ifdef CONFIG_PMAC_MEDIABAY - if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) { + if (on_media_bay(pmif)) { + if (check_media_bay(pmif->mdev->media_bay) == MB_CD) { drive->dev_flags &= ~IDE_DFLAG_NOPROBE; return; } -#endif drive->dev_flags |= IDE_DFLAG_NOPROBE; } } @@ -1072,26 +1073,23 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, writel(KAUAI_FCR_UATA_MAGIC | KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr); - - pmif->mediabay = 0; /* Make sure we have sane timings */ sanitize_timings(pmif); + /* If we are on a media bay, wait for it to settle and lock it */ + if (pmif->mdev) + lock_media_bay(pmif->mdev->media_bay); + host = ide_host_alloc(&d, hws, 1); - if (host == NULL) - return -ENOMEM; - hwif = host->ports[0]; + if (host == NULL) { + rc = -ENOMEM; + goto bail; + } + hwif = pmif->hwif = host->ports[0]; -#ifndef CONFIG_PPC64 - /* XXX FIXME: Media bay stuff need re-organizing */ - if (np->parent && np->parent->name - && strcasecmp(np->parent->name, "media-bay") == 0) { -#ifdef CONFIG_PMAC_MEDIABAY - media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, - hwif); -#endif /* CONFIG_PMAC_MEDIABAY */ - pmif->mediabay = 1; + if (on_media_bay(pmif)) { + /* Fixup bus ID for media bay */ if (!bidp) pmif->aapl_bus_id = 1; } else if (pmif->kind == controller_ohare) { @@ -1100,9 +1098,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, * units, I keep the old way */ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1); - } else -#endif - { + } else { /* This is necessary to enable IDE when net-booting */ ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1); ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1); @@ -1112,17 +1108,21 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, } printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), " - "bus ID %d%s, irq %d\n", model_name[pmif->kind], - pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, - pmif->mediabay ? " (mediabay)" : "", hw->irq); + "bus ID %d%s, irq %d\n", model_name[pmif->kind], + pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, + on_media_bay(pmif) ? " (mediabay)" : "", hw->irq); rc = ide_host_register(host, &d, hws); - if (rc) { - ide_host_free(host); - return rc; - } + if (rc) + pmif->hwif = NULL; - return 0; + if (pmif->mdev) + unlock_media_bay(pmif->mdev->media_bay); + + bail: + if (rc && host) + ide_host_free(host); + return rc; } static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base) @@ -1362,6 +1362,25 @@ pmac_ide_pci_resume(struct pci_dev *pdev) return rc; } +#ifdef CONFIG_PMAC_MEDIABAY +static void pmac_ide_macio_mb_event(struct macio_dev* mdev, int mb_state) +{ + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + + switch(mb_state) { + case MB_CD: + if (!pmif->hwif->present) + ide_port_scan(pmif->hwif); + break; + default: + if (pmif->hwif->present) + ide_port_unregister_devices(pmif->hwif); + } +} +#endif /* CONFIG_PMAC_MEDIABAY */ + + static struct of_device_id pmac_ide_macio_match[] = { { @@ -1386,6 +1405,9 @@ static struct macio_driver pmac_ide_macio_driver = .probe = pmac_ide_macio_attach, .suspend = pmac_ide_macio_suspend, .resume = pmac_ide_macio_resume, +#ifdef CONFIG_PMAC_MEDIABAY + .mediabay_event = pmac_ide_macio_mb_event, +#endif }; static const struct pci_device_id pmac_ide_pci_match[] = { diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 029ad8c..08002b8 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -33,15 +33,6 @@ #include <linux/adb.h> #include <linux/pmu.h> - -#define MB_DEBUG - -#ifdef MB_DEBUG -#define MBDBG(fmt, arg...) printk(KERN_INFO fmt , ## arg) -#else -#define MBDBG(fmt, arg...) do { } while (0) -#endif - #define MB_FCR32(bay, r) ((bay)->base + ((r) >> 2)) #define MB_FCR8(bay, r) (((volatile u8 __iomem *)((bay)->base)) + (r)) @@ -76,28 +67,14 @@ struct media_bay_info { int index; int cached_gpio; int sleeping; + int user_lock; struct mutex lock; -#ifdef CONFIG_BLK_DEV_IDE_PMAC - ide_hwif_t *cd_port; - void __iomem *cd_base; - int cd_irq; - int cd_retry; -#endif -#if defined(CONFIG_BLK_DEV_IDE_PMAC) - int cd_index; -#endif }; #define MAX_BAYS 2 static struct media_bay_info media_bays[MAX_BAYS]; -int media_bay_count = 0; - -#ifdef CONFIG_BLK_DEV_IDE_PMAC -/* check the busy bit in the media-bay ide interface - (assumes the media-bay contains an ide device) */ -#define MB_IDE_READY(i) ((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0) -#endif +static int media_bay_count = 0; /* * Wait that number of ms between each step in normal polling mode @@ -130,21 +107,11 @@ int media_bay_count = 0; /* * Wait this many ticks after an IDE device (e.g. CD-ROM) is inserted - * (or until the device is ready) before waiting for busy bit to disappear + * (or until the device is ready) before calling into the driver */ #define MB_IDE_WAIT 1000 /* - * Timeout waiting for busy bit of an IDE device to go down - */ -#define MB_IDE_TIMEOUT 5000 - -/* - * Max retries of the full power up/down sequence for an IDE device - */ -#define MAX_CD_RETRIES 3 - -/* * States of a media bay */ enum { @@ -153,7 +120,6 @@ enum { mb_enabling_bay, /* enable bits set, waiting MB_RESET_DELAY */ mb_resetting, /* reset bit unset, waiting MB_SETUP_DELAY */ mb_ide_resetting, /* IDE reset bit unser, waiting MB_IDE_WAIT */ - mb_ide_waiting, /* Waiting for BUSY bit to go away until MB_IDE_TIMEOUT */ mb_up, /* Media bay full */ mb_powering_down /* Powering down (avoid too fast down/up) */ }; @@ -373,12 +339,12 @@ static inline void set_mb_power(struct media_bay_info* bay, int onoff) if (onoff) { bay->ops->power(bay, 1); bay->state = mb_powering_up; - MBDBG("mediabay%d: powering up\n", bay->index); + pr_debug("mediabay%d: powering up\n", bay->index); } else { /* Make sure everything is powered down & disabled */ bay->ops->power(bay, 0); bay->state = mb_powering_down; - MBDBG("mediabay%d: powering down\n", bay->index); + pr_debug("mediabay%d: powering down\n", bay->index); } bay->timer = msecs_to_jiffies(MB_POWER_DELAY); } @@ -387,107 +353,118 @@ static void poll_media_bay(struct media_bay_info* bay) { int id = bay->ops->content(bay); - if (id == bay->last_value) { - if (id != bay->content_id) { - bay->value_count += msecs_to_jiffies(MB_POLL_DELAY); - if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) { - /* If the device type changes without going thru - * "MB_NO", we force a pass by "MB_NO" to make sure - * things are properly reset - */ - if ((id != MB_NO) && (bay->content_id != MB_NO)) { - id = MB_NO; - MBDBG("mediabay%d: forcing MB_NO\n", bay->index); - } - MBDBG("mediabay%d: switching to %d\n", bay->index, id); - set_mb_power(bay, id != MB_NO); - bay->content_id = id; - if (id == MB_NO) { -#ifdef CONFIG_BLK_DEV_IDE_PMAC - bay->cd_retry = 0; -#endif - printk(KERN_INFO "media bay %d is empty\n", bay->index); - } - } - } - } else { + static char *mb_content_types[] = { + "a floppy drive", + "a floppy drive", + "an unsuported audio device", + "an ATA device", + "an unsupported PCI device", + "an unknown device", + }; + + if (id != bay->last_value) { bay->last_value = id; bay->value_count = 0; + return; + } + if (id == bay->content_id) + return; + + bay->value_count += msecs_to_jiffies(MB_POLL_DELAY); + if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) { + /* If the device type changes without going thru + * "MB_NO", we force a pass by "MB_NO" to make sure + * things are properly reset + */ + if ((id != MB_NO) && (bay->content_id != MB_NO)) { + id = MB_NO; + pr_debug("mediabay%d: forcing MB_NO\n", bay->index); + } + pr_debug("mediabay%d: switching to %d\n", bay->index, id); + set_mb_power(bay, id != MB_NO); + bay->content_id = id; + if (id >= MB_NO || id < 0) + printk(KERN_INFO "mediabay%d: Bay is now empty\n", bay->index); + else + printk(KERN_INFO "mediabay%d: Bay contains %s\n", + bay->index, mb_content_types[id]); } } -#ifdef CONFIG_BLK_DEV_IDE_PMAC -int check_media_bay(struct device_node *which_bay, int what) +int check_media_bay(struct macio_dev *baydev) { - int i; + struct media_bay_info* bay; + int id; - for (i=0; i<media_bay_count; i++) - if (media_bays[i].mdev && which_bay == media_bays[i].mdev->ofdev.node) { - if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up) - return 0; - media_bays[i].cd_index = -1; - return -EINVAL; - } - return -ENODEV; + if (baydev == NULL) + return MB_NO; + + /* This returns an instant snapshot, not locking, sine + * we may be called with the bay lock held. The resulting + * fuzzyness of the result if called at the wrong time is + * not actually a huge deal + */ + bay = macio_get_drvdata(baydev); + if (bay == NULL) + return MB_NO; + id = bay->content_id; + if (bay->state != mb_up) + return MB_NO; + if (id == MB_FD1) + return MB_FD; + return id; } -EXPORT_SYMBOL(check_media_bay); +EXPORT_SYMBOL_GPL(check_media_bay); -int check_media_bay_by_base(unsigned long base, int what) +void lock_media_bay(struct macio_dev *baydev) { - int i; - - for (i=0; i<media_bay_count; i++) - if (media_bays[i].mdev && base == (unsigned long) media_bays[i].cd_base) { - if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up) - return 0; - media_bays[i].cd_index = -1; - return -EINVAL; - } + struct media_bay_info* bay; - return -ENODEV; + if (baydev == NULL) + return; + bay = macio_get_drvdata(baydev); + if (bay == NULL) + return; + mutex_lock(&bay->lock); + bay->user_lock = 1; } -EXPORT_SYMBOL_GPL(check_media_bay_by_base); +EXPORT_SYMBOL_GPL(lock_media_bay); -int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base, - int irq, ide_hwif_t *hwif) +void unlock_media_bay(struct macio_dev *baydev) { - int i; + struct media_bay_info* bay; - for (i=0; i<media_bay_count; i++) { - struct media_bay_info* bay = &media_bays[i]; - - if (bay->mdev && which_bay == bay->mdev->ofdev.node) { - int timeout = 5000, index = hwif->index; - - mutex_lock(&bay->lock); - - bay->cd_port = hwif; - bay->cd_base = (void __iomem *) base; - bay->cd_irq = irq; - - if ((MB_CD != bay->content_id) || bay->state != mb_up) { - mutex_unlock(&bay->lock); - return 0; - } - printk(KERN_DEBUG "Registered ide%d for media bay %d\n", index, i); - do { - if (MB_IDE_READY(i)) { - bay->cd_index = index; - mutex_unlock(&bay->lock); - return 0; - } - mdelay(1); - } while(--timeout); - printk(KERN_DEBUG "Timeount waiting IDE in bay %d\n", i); - mutex_unlock(&bay->lock); - return -ENODEV; - } + if (baydev == NULL) + return; + bay = macio_get_drvdata(baydev); + if (bay == NULL) + return; + if (bay->user_lock) { + bay->user_lock = 0; + mutex_unlock(&bay->lock); } +} +EXPORT_SYMBOL_GPL(unlock_media_bay); - return -ENODEV; +static int mb_broadcast_hotplug(struct device *dev, void *data) +{ + struct media_bay_info* bay = data; + struct macio_dev *mdev; + struct macio_driver *drv; + int state; + + if (dev->bus != &macio_bus_type) + return 0; + + state = bay->state == mb_up ? bay->content_id : MB_NO; + if (state == MB_FD1) + state = MB_FD; + mdev = to_macio_device(dev); + drv = to_macio_driver(dev->driver); + if (dev->driver && drv->mediabay_event) + drv->mediabay_event(mdev, state); + return 0; } -EXPORT_SYMBOL_GPL(media_bay_set_ide_infos); -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ static void media_bay_step(int i) { @@ -497,8 +474,8 @@ static void media_bay_step(int i) if (bay->state != mb_powering_down) poll_media_bay(bay); - /* If timer expired or polling IDE busy, run state machine */ - if ((bay->state != mb_ide_waiting) && (bay->timer != 0)) { + /* If timer expired run state machine */ + if (bay->timer != 0) { bay->timer -= msecs_to_jiffies(MB_POLL_DELAY); if (bay->timer > 0) return; @@ -508,100 +485,50 @@ static void media_bay_step(int i) switch(bay->state) { case mb_powering_up: if (bay->ops->setup_bus(bay, bay->last_value) < 0) { - MBDBG("mediabay%d: device not supported (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: device not supported (kind:%d)\n", + i, bay->content_id); set_mb_power(bay, 0); break; } bay->timer = msecs_to_jiffies(MB_RESET_DELAY); bay->state = mb_enabling_bay; - MBDBG("mediabay%d: enabling (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: enabling (kind:%d)\n", i, bay->content_id); break; case mb_enabling_bay: bay->ops->un_reset(bay); bay->timer = msecs_to_jiffies(MB_SETUP_DELAY); bay->state = mb_resetting; - MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: releasing bay reset (kind:%d)\n", + i, bay->content_id); break; case mb_resetting: if (bay->content_id != MB_CD) { - MBDBG("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: bay is up (kind:%d)\n", i, + bay->content_id); bay->state = mb_up; + device_for_each_child(&bay->mdev->ofdev.dev, + bay, mb_broadcast_hotplug); break; } -#ifdef CONFIG_BLK_DEV_IDE_PMAC - MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: releasing ATA reset (kind:%d)\n", + i, bay->content_id); bay->ops->un_reset_ide(bay); bay->timer = msecs_to_jiffies(MB_IDE_WAIT); bay->state = mb_ide_resetting; -#else - printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i); - set_mb_power(bay, 0); -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ break; -#ifdef CONFIG_BLK_DEV_IDE_PMAC + case mb_ide_resetting: - bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT); - bay->state = mb_ide_waiting; - MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id); + bay->state = mb_up; + device_for_each_child(&bay->mdev->ofdev.dev, + bay, mb_broadcast_hotplug); break; - case mb_ide_waiting: - if (bay->cd_base == NULL) { - bay->timer = 0; - bay->state = mb_up; - MBDBG("mediabay%d: up before IDE init\n", i); - break; - } else if (MB_IDE_READY(i)) { - bay->timer = 0; - bay->state = mb_up; - if (bay->cd_index < 0) { - printk("mediabay %d, registering IDE...\n", i); - pmu_suspend(); - ide_port_scan(bay->cd_port); - if (bay->cd_port->present) - bay->cd_index = bay->cd_port->index; - pmu_resume(); - } - if (bay->cd_index == -1) { - /* We eventually do a retry */ - bay->cd_retry++; - printk("IDE register error\n"); - set_mb_power(bay, 0); - } else { - printk(KERN_DEBUG "media-bay %d is ide%d\n", i, bay->cd_index); - MBDBG("mediabay %d IDE ready\n", i); - } - break; - } else if (bay->timer > 0) - bay->timer -= msecs_to_jiffies(MB_POLL_DELAY); - if (bay->timer <= 0) { - printk("\nIDE Timeout in bay %d !, IDE state is: 0x%02x\n", - i, readb(bay->cd_base + 0x70)); - MBDBG("mediabay%d: nIDE Timeout !\n", i); - set_mb_power(bay, 0); - bay->timer = 0; - } - break; -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ + case mb_powering_down: bay->state = mb_empty; -#ifdef CONFIG_BLK_DEV_IDE_PMAC - if (bay->cd_index >= 0) { - printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i, - bay->cd_index); - ide_port_unregister_devices(bay->cd_port); - bay->cd_index = -1; - } - if (bay->cd_retry) { - if (bay->cd_retry > MAX_CD_RETRIES) { - /* Should add an error sound (sort of beep in dmasound) */ - printk("\nmedia-bay %d, IDE device badly inserted or unrecognised\n", i); - } else { - /* Force a new power down/up sequence */ - bay->content_id = MB_NO; - } - } -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ - MBDBG("mediabay%d: end of power down\n", i); + device_for_each_child(&bay->mdev->ofdev.dev, + bay, mb_broadcast_hotplug); + pr_debug("mediabay%d: end of power down\n", i); break; } } @@ -676,11 +603,6 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de bay->last_value = bay->ops->content(bay); bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY); bay->state = mb_empty; - do { - msleep(MB_POLL_DELAY); - media_bay_step(i); - } while((bay->state != mb_empty) && - (bay->state != mb_up)); /* Mark us ready by filling our mdev data */ macio_set_drvdata(mdev, bay); @@ -725,7 +647,7 @@ static int media_bay_resume(struct macio_dev *mdev) set_mb_power(bay, 0); msleep(MB_POWER_DELAY); if (bay->ops->content(bay) != bay->content_id) { - printk("mediabay%d: content changed during sleep...\n", bay->index); + printk("mediabay%d: Content changed during sleep...\n", bay->index); mutex_unlock(&bay->lock); return 0; } @@ -733,9 +655,6 @@ static int media_bay_resume(struct macio_dev *mdev) bay->last_value = bay->content_id; bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY); bay->timer = msecs_to_jiffies(MB_POWER_DELAY); -#ifdef CONFIG_BLK_DEV_IDE_PMAC - bay->cd_retry = 0; -#endif do { msleep(MB_POLL_DELAY); media_bay_step(bay->index); @@ -823,9 +742,6 @@ static int __init media_bay_init(void) for (i=0; i<MAX_BAYS; i++) { memset((char *)&media_bays[i], 0, sizeof(struct media_bay_info)); media_bays[i].content_id = -1; -#ifdef CONFIG_BLK_DEV_IDE_PMAC - media_bays[i].cd_index = -1; -#endif } if (!machine_is(powermac)) return 0; |
