summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/Kconfig2
-rw-r--r--drivers/base/devres.c32
-rw-r--r--drivers/base/platform.c2
-rw-r--r--drivers/block/rd.c2
-rw-r--r--drivers/char/drm/drm_dma.c2
-rw-r--r--drivers/char/drm/drm_vm.c2
-rw-r--r--drivers/char/drm/r300_reg.h2
-rw-r--r--drivers/char/genrtc.c4
-rw-r--r--drivers/char/pcmcia/cm4000_cs.c2
-rw-r--r--drivers/char/tpm/Kconfig2
-rw-r--r--drivers/char/tty_io.c8
-rw-r--r--drivers/crypto/Kconfig2
-rw-r--r--drivers/ide/pci/siimage.c2
-rw-r--r--drivers/ieee1394/nodemgr.c2
-rw-r--r--drivers/isdn/capi/Kconfig2
-rw-r--r--drivers/isdn/hardware/eicon/divasync.h2
-rw-r--r--drivers/isdn/hisax/hfc_usb.c4
-rw-r--r--drivers/leds/leds-h1940.c2
-rw-r--r--drivers/macintosh/Kconfig2
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-remote.c2
-rw-r--r--drivers/media/dvb/frontends/dib7000m.c2
-rw-r--r--drivers/media/dvb/frontends/dib7000p.c2
-rw-r--r--drivers/media/dvb/frontends/tda10021.c2
-rw-r--r--drivers/media/dvb/frontends/ves1x93.c2
-rw-r--r--drivers/media/video/em28xx/em28xx-i2c.c2
-rw-r--r--drivers/media/video/em28xx/em28xx-video.c2
-rw-r--r--drivers/media/video/pwc/philips.txt6
-rw-r--r--drivers/media/video/usbvideo/vicam.c2
-rw-r--r--drivers/message/fusion/lsi/mpi_history.txt2
-rw-r--r--drivers/message/fusion/mptbase.c2
-rw-r--r--drivers/mtd/maps/Kconfig2
-rw-r--r--drivers/mtd/maps/nettel.c2
-rw-r--r--drivers/mtd/onenand/onenand_base.c2
-rw-r--r--drivers/net/3c509.c5
-rw-r--r--drivers/net/3c59x.c2
-rw-r--r--drivers/net/atp.c8
-rw-r--r--drivers/net/bonding/bond_main.c2
-rw-r--r--drivers/net/eepro.c2
-rw-r--r--drivers/net/eepro100.c2
-rw-r--r--drivers/net/epic100.c10
-rw-r--r--drivers/net/hamradio/Kconfig2
-rw-r--r--drivers/net/irda/donauboe.h2
-rw-r--r--drivers/net/ixgb/ixgb_ee.c2
-rw-r--r--drivers/net/meth.h2
-rw-r--r--drivers/net/natsemi.c1
-rw-r--r--drivers/net/ne2k-pci.c3
-rw-r--r--drivers/net/sundance.c3
-rw-r--r--drivers/net/tulip/interrupt.c2
-rw-r--r--drivers/net/tulip/winbond-840.c2
-rw-r--r--drivers/net/tulip/xircom_cb.c2
-rw-r--r--drivers/net/typhoon.c2
-rw-r--r--drivers/net/wireless/airport.c2
-rw-r--r--drivers/net/wireless/prism54/isl_ioctl.c2
-rw-r--r--drivers/net/wireless/prism54/islpci_dev.c2
-rw-r--r--drivers/net/wireless/wavelan_cs.c4
-rw-r--r--drivers/net/wireless/wavelan_cs.p.h2
-rw-r--r--drivers/net/yellowfin.c1
-rw-r--r--drivers/pci/pci-driver.c2
-rw-r--r--drivers/rtc/Kconfig2
-rw-r--r--drivers/s390/char/sclp_rw.c2
-rw-r--r--drivers/s390/net/qeth_main.c2
-rw-r--r--drivers/s390/scsi/zfcp_qdio.c2
-rw-r--r--drivers/sbus/char/bpp.c2
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_pci.c2
-rw-r--r--drivers/scsi/aic94xx/Makefile2
-rw-r--r--drivers/scsi/dc395x.c6
-rw-r--r--drivers/scsi/scsi_lib.c2
-rw-r--r--drivers/usb/misc/auerswald.c2
-rw-r--r--drivers/usb/net/usbnet.h2
-rw-r--r--drivers/usb/serial/Kconfig2
-rw-r--r--drivers/usb/serial/aircable.c4
-rw-r--r--drivers/usb/serial/io_edgeport.c4
-rw-r--r--drivers/video/console/softcursor.c2
-rw-r--r--drivers/video/i810/i810_main.c2
-rw-r--r--drivers/video/matrox/matroxfb_Ti3026.c2
-rw-r--r--drivers/video/matrox/matroxfb_accel.c2
-rw-r--r--drivers/video/matrox/matroxfb_base.c2
-rw-r--r--drivers/video/matrox/matroxfb_misc.c2
-rw-r--r--drivers/video/skeletonfb.c2
79 files changed, 110 insertions, 119 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 45dbdc1..c721966 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -435,7 +435,7 @@ config PATA_OPTIDMA
help
This option enables DMA/PIO support for the later OPTi
controllers found on some old motherboards and in some
- latops
+ laptops.
If unsure, say N.
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index e177c95..e1c0730 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -101,19 +101,6 @@ static void add_dr(struct device *dev, struct devres_node *node)
list_add_tail(&node->entry, &dev->devres_head);
}
-/**
- * devres_alloc - Allocate device resource data
- * @release: Release function devres will be associated with
- * @size: Allocation size
- * @gfp: Allocation flags
- *
- * allocate devres of @size bytes. The allocated area is zeroed, then
- * associated with @release. The returned pointer can be passed to
- * other devres_*() functions.
- *
- * RETURNS:
- * Pointer to allocated devres on success, NULL on failure.
- */
#ifdef CONFIG_DEBUG_DEVRES
void * __devres_alloc(dr_release_t release, size_t size, gfp_t gfp,
const char *name)
@@ -128,6 +115,19 @@ void * __devres_alloc(dr_release_t release, size_t size, gfp_t gfp,
}
EXPORT_SYMBOL_GPL(__devres_alloc);
#else
+/**
+ * devres_alloc - Allocate device resource data
+ * @release: Release function devres will be associated with
+ * @size: Allocation size
+ * @gfp: Allocation flags
+ *
+ * Allocate devres of @size bytes. The allocated area is zeroed, then
+ * associated with @release. The returned pointer can be passed to
+ * other devres_*() functions.
+ *
+ * RETURNS:
+ * Pointer to allocated devres on success, NULL on failure.
+ */
void * devres_alloc(dr_release_t release, size_t size, gfp_t gfp)
{
struct devres *dr;
@@ -416,7 +416,7 @@ static int release_nodes(struct device *dev, struct list_head *first,
}
/**
- * devres_release_all - Release all resources
+ * devres_release_all - Release all managed resources
* @dev: Device to release resources for
*
* Release all resources associated with @dev. This function is
@@ -600,7 +600,7 @@ static int devm_kzalloc_match(struct device *dev, void *res, void *data)
}
/**
- * devm_kzalloc - Managed kzalloc
+ * devm_kzalloc - Resource-managed kzalloc
* @dev: Device to allocate memory for
* @size: Allocation size
* @gfp: Allocation gfp flags
@@ -628,7 +628,7 @@ void * devm_kzalloc(struct device *dev, size_t size, gfp_t gfp)
EXPORT_SYMBOL_GPL(devm_kzalloc);
/**
- * devm_kfree - Managed kfree
+ * devm_kfree - Resource-managed kfree
* @dev: Device this memory belongs to
* @p: Memory to free
*
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index eb84d9d..869ff8c 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -360,7 +360,7 @@ EXPORT_SYMBOL_GPL(platform_device_unregister);
* This function creates a simple platform device that requires minimal
* resource and memory management. Canned release function freeing
* memory allocated for the device allows drivers using such devices
- * to be unloaded iwithout waiting for the last reference to the device
+ * to be unloaded without waiting for the last reference to the device
* to be dropped.
*
* This interface is primarily intended for use with legacy drivers
diff --git a/drivers/block/rd.c b/drivers/block/rd.c
index 43d4ebc..a1512da 100644
--- a/drivers/block/rd.c
+++ b/drivers/block/rd.c
@@ -151,7 +151,7 @@ static int ramdisk_commit_write(struct file *file, struct page *page,
}
/*
- * ->writepage to the the blockdev's mapping has to redirty the page so that the
+ * ->writepage to the blockdev's mapping has to redirty the page so that the
* VM doesn't go and steal it. We return AOP_WRITEPAGE_ACTIVATE so that the VM
* won't try to (pointlessly) write the page again for a while.
*
diff --git a/drivers/char/drm/drm_dma.c b/drivers/char/drm/drm_dma.c
index 892db70..32ed19c 100644
--- a/drivers/char/drm/drm_dma.c
+++ b/drivers/char/drm/drm_dma.c
@@ -65,7 +65,7 @@ int drm_dma_setup(drm_device_t * dev)
* \param dev DRM device.
*
* Free all pages associated with DMA buffers, the buffers and pages lists, and
- * finally the the drm_device::dma structure itself.
+ * finally the drm_device::dma structure itself.
*/
void drm_dma_takedown(drm_device_t * dev)
{
diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c
index 35540cf..b5c5b9f 100644
--- a/drivers/char/drm/drm_vm.c
+++ b/drivers/char/drm/drm_vm.c
@@ -157,7 +157,7 @@ static __inline__ struct page *drm_do_vm_nopage(struct vm_area_struct *vma,
* \param address access address.
* \return pointer to the page structure.
*
- * Get the the mapping, find the real physical page to map, get the page, and
+ * Get the mapping, find the real physical page to map, get the page, and
* return it.
*/
static __inline__ struct page *drm_do_vm_shm_nopage(struct vm_area_struct *vma,
diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
index a881f96..ecda760 100644
--- a/drivers/char/drm/r300_reg.h
+++ b/drivers/char/drm/r300_reg.h
@@ -293,7 +293,7 @@ I am fairly certain that they are correct unless stated otherwise in comments.
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c
index 49f914e..9e1fc02 100644
--- a/drivers/char/genrtc.c
+++ b/drivers/char/genrtc.c
@@ -12,7 +12,7 @@
*
* This driver allows use of the real time clock (built into
* nearly all computers) from user space. It exports the /dev/rtc
- * interface supporting various ioctl() and also the /proc/dev/rtc
+ * interface supporting various ioctl() and also the /proc/driver/rtc
* pseudo-file for status information.
*
* The ioctls can be used to set the interrupt behaviour where
@@ -377,7 +377,7 @@ static int gen_rtc_release(struct inode *inode, struct file *file)
#ifdef CONFIG_PROC_FS
/*
- * Info exported via "/proc/rtc".
+ * Info exported via "/proc/driver/rtc".
*/
static int gen_rtc_proc_output(char *buf)
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 561d0e1..fee58e0 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1091,7 +1091,7 @@ static ssize_t cmm_write(struct file *filp, const char __user *buf,
/*
* wait for atr to become valid.
* note: it is important to lock this code. if we dont, the monitor
- * could be run between test_bit and the the call the sleep on the
+ * could be run between test_bit and the call to sleep on the
* atr-queue. if *then* the monitor detects atr valid, it will wake up
* any process on the atr-queue, *but* since we have been interrupted,
* we do not yet sleep on this queue. this would result in a missed
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index fe00c7d..11089be 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -33,7 +33,7 @@ config TCG_NSC
tristate "National Semiconductor TPM Interface"
depends on TCG_TPM && PNPACPI
---help---
- If you have a TPM security chip from National Semicondutor
+ If you have a TPM security chip from National Semiconductor
say Yes and it will be accessible from within Linux. To
compile this driver as a module, choose M here; the module
will be called tpm_nsc.
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index bf5a001..fc662e4 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1573,11 +1573,11 @@ void no_tty(void)
/**
- * stop_tty - propogate flow control
+ * stop_tty - propagate flow control
* @tty: tty to stop
*
* Perform flow control to the driver. For PTY/TTY pairs we
- * must also propogate the TIOCKPKT status. May be called
+ * must also propagate the TIOCKPKT status. May be called
* on an already stopped device and will not re-call the driver
* method.
*
@@ -1607,11 +1607,11 @@ void stop_tty(struct tty_struct *tty)
EXPORT_SYMBOL(stop_tty);
/**
- * start_tty - propogate flow control
+ * start_tty - propagate flow control
* @tty: tty to start
*
* Start a tty that has been stopped if at all possible. Perform
- * any neccessary wakeups and propogate the TIOCPKT status. If this
+ * any neccessary wakeups and propagate the TIOCPKT status. If this
* is the tty was previous stopped and is being started then the
* driver start method is invoked and the line discipline woken.
*
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index f21fe66..f4c6345 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -51,7 +51,7 @@ config CRYPTO_DEV_GEODE
default m
help
Say 'Y' here to use the AMD Geode LX processor on-board AES
- engine for the CryptoAPI AES alogrithm.
+ engine for the CryptoAPI AES algorithm.
To compile this driver as a module, choose M here: the module
will be called geode-aes.
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index c0188de..79cec50 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -831,7 +831,7 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
/*
* Now set up the hw. We have to do this ourselves as
- * the MMIO layout isnt the same as the the standard port
+ * the MMIO layout isnt the same as the standard port
* based I/O
*/
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 6a1a057..835937e 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -1702,7 +1702,7 @@ static int nodemgr_host_thread(void *__hi)
generation = get_hpsb_generation(host);
/* If we get a reset before we are done waiting, then
- * start the the waiting over again */
+ * start the waiting over again */
if (generation != g)
g = generation, i = 0;
}
diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig
index c921d6c..c92f9d7 100644
--- a/drivers/isdn/capi/Kconfig
+++ b/drivers/isdn/capi/Kconfig
@@ -17,7 +17,7 @@ config CAPI_TRACE
help
If you say Y here, the kernelcapi driver can make verbose traces
of CAPI messages. This feature can be enabled/disabled via IOCTL for
- every controler (default disabled).
+ every controller (default disabled).
This will increase the size of the kernelcapi module by 20 KB.
If unsure, say Y.
diff --git a/drivers/isdn/hardware/eicon/divasync.h b/drivers/isdn/hardware/eicon/divasync.h
index af3eb9e..85784a7 100644
--- a/drivers/isdn/hardware/eicon/divasync.h
+++ b/drivers/isdn/hardware/eicon/divasync.h
@@ -216,7 +216,7 @@ typedef struct
#define SERIAL_HOOK_RING 0x85
#define SERIAL_HOOK_DETACH 0x8f
unsigned char Flags; /* function refinements */
- /* parameters passed by the the ATTACH request */
+ /* parameters passed by the ATTACH request */
SERIAL_INT_CB InterruptHandler; /* called on each interrupt */
SERIAL_DPC_CB DeferredHandler; /* called on hook state changes */
void *HandlerContext; /* context for both handlers */
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 99e70d4..1f18f19 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -1217,11 +1217,11 @@ usb_init(hfcusb_data * hfc)
/* aux = output, reset off */
write_usb(hfc, HFCUSB_CIRM, 0x10);
- /* set USB_SIZE to match the the wMaxPacketSize for INT or BULK transfers */
+ /* set USB_SIZE to match the wMaxPacketSize for INT or BULK transfers */
write_usb(hfc, HFCUSB_USB_SIZE,
(hfc->packet_size / 8) | ((hfc->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 1d49d2a..677c993 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -1,5 +1,5 @@
/*
- * drivers/leds/h1940-leds.c
+ * drivers/leds/leds-h1940.c
* Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org>
*
* This file is subject to the terms and conditions of the GNU General Public
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index a32c91e..58926da 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -237,7 +237,7 @@ config PMAC_RACKMETER
tristate "Support for Apple XServe front panel LEDs"
depends on PPC_PMAC
help
- This driver procides some support to control the front panel
+ This driver provides some support to control the front panel
blue LEDs "vu-meter" of the XServer macs.
endif # MACINTOSH_DRIVERS
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index 68ed3a7..9200a30 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -3,7 +3,7 @@
* Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
* see dvb-usb-init.c for copyright information.
*
- * This file contains functions for initializing the the input-device and for handling remote-control-queries.
+ * This file contains functions for initializing the input-device and for handling remote-control-queries.
*/
#include "dvb-usb-common.h"
#include <linux/usb/input.h>
diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c
index f5d40aa..f64546c 100644
--- a/drivers/media/dvb/frontends/dib7000m.c
+++ b/drivers/media/dvb/frontends/dib7000m.c
@@ -266,7 +266,7 @@ static int dib7000m_sad_calib(struct dib7000m_state *state)
{
/* internal */
-// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth
dib7000m_write_word(state, 929, (0 << 1) | (0 << 0));
dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 0349a4b..aece458 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -223,7 +223,7 @@ static int dib7000p_set_bandwidth(struct dvb_frontend *demod, u8 BW_Idx)
static int dib7000p_sad_calib(struct dib7000p_state *state)
{
/* internal */
-// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth
dib7000p_write_word(state, 73, (0 << 1) | (0 << 0));
dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index 1105368..e725f61 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -1,6 +1,6 @@
/*
TDA10021 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb/frontends/ves1x93.c
index 54d7b07..23fd030 100644
--- a/drivers/media/dvb/frontends/ves1x93.c
+++ b/drivers/media/dvb/frontends/ves1x93.c
@@ -306,7 +306,7 @@ static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status)
* The ves1893 sometimes returns sync values that make no sense,
* because, e.g., the SIGNAL bit is 0, while some of the higher
* bits are 1 (and how can there be a CARRIER w/o a SIGNAL?).
- * Tests showed that the the VITERBI and SYNC bits are returned
+ * Tests showed that the VITERBI and SYNC bits are returned
* reliably, while the SIGNAL and CARRIER bits ar sometimes wrong.
* If such a case occurs, we read the value again, until we get a
* valid value.
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 563a831..54ccc6e 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -70,7 +70,7 @@ static int em2800_i2c_send_max4(struct em28xx *dev, unsigned char addr,
ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
if (ret != 2 + len) {
- em28xx_warn("writting to i2c device failed (error=%i)\n", ret);
+ em28xx_warn("writing to i2c device failed (error=%i)\n", ret);
return -EIO;
}
for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index bec6760..2c7b158 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1729,7 +1729,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
endpoint = &interface->cur_altsetting->endpoint[1].desc;
- /* check if the the device has the iso in endpoint at the correct place */
+ /* check if the device has the iso in endpoint at the correct place */
if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
USB_ENDPOINT_XFER_ISOC) {
em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n");
diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt
index f5e8484..f9f3584 100644
--- a/drivers/media/video/pwc/philips.txt
+++ b/drivers/media/video/pwc/philips.txt
@@ -54,9 +54,9 @@ fps
Specifies the desired framerate. Is an integer in the range of 4-30.
fbufs
- This paramter specifies the number of internal buffers to use for storing
+ This parameter specifies the number of internal buffers to use for storing
frames from the cam. This will help if the process that reads images from
- the cam is a bit slow or momentarely busy. However, on slow machines it
+ the cam is a bit slow or momentarily busy. However, on slow machines it
only introduces lag, so choose carefully. The default is 3, which is
reasonable. You can set it between 2 and 5.
@@ -209,7 +209,7 @@ trace
128 0x80 PWCX debugging Off
- For example, to trace the open() & read() fuctions, sum 8 + 4 = 12,
+ For example, to trace the open() & read() functions, sum 8 + 4 = 12,
so you would supply trace=12 during insmod or modprobe. If
you want to turn the initialization and probing tracing off, set trace=0.
The default value for trace is 35 (0x23).
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 876fd27..982b115 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -28,7 +28,7 @@
*
* Portions of this code were also copied from usbvideo.c
*
- * Special thanks to the the whole team at Sourceforge for help making
+ * Special thanks to the whole team at Sourceforge for help making
* this driver become a reality. Notably:
* Andy Armstrong who reverse engineered the color encoding and
* Pavel Machek and Chris Cheney who worked on reverse engineering the
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index d6b4c60..ddc7ae0 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -571,7 +571,7 @@ mpi_fc.h
* 11-02-00 01.01.01 Original release for post 1.0 work
* 12-04-00 01.01.02 Added messages for Common Transport Send and
* Primitive Send.
- * 01-09-01 01.01.03 Modifed some of the new flags to have an MPI prefix
+ * 01-09-01 01.01.03 Modified some of the new flags to have an MPI prefix
* and modified the FcPrimitiveSend flags.
* 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger
* field.
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 97471af..5021d1a 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -3585,7 +3585,7 @@ initChainBuffers(MPT_ADAPTER *ioc)
* index = chain_idx
*
* Calculate the number of chain buffers needed(plus 1) per I/O
- * then multiply the the maximum number of simultaneous cmds
+ * then multiply the maximum number of simultaneous cmds
*
* num_sge = num sge in request frame + last chain buffer
* scale = num sge per chain buffer if no chain element
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index d990d81..5fcd8b3 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -60,7 +60,7 @@ config MTD_PHYSMAP_BANKWIDTH
(i.e., run-time calling physmap_configure()).
config MTD_PHYSMAP_OF
- tristate "Flash device in physical memory map based on OF descirption"
+ tristate "Flash device in physical memory map based on OF description"
depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
help
This provides a 'mapping' driver which allows the NOR Flash and
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 9f53c65..7b96cd02 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -358,7 +358,7 @@ int __init nettel_init(void)
/* Turn other PAR off so the first probe doesn't find it */
*intel1par = 0;
- /* Probe for the the size of the first Intel flash */
+ /* Probe for the size of the first Intel flash */
nettel_intel_map.size = maxsize;
nettel_intel_map.phys = intel0addr;
nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize);
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 000794c..0537fac 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -2192,7 +2192,7 @@ static int onenand_check_maf(int manuf)
* @param mtd MTD device structure
*
* OneNAND detection method:
- * Compare the the values from command with ones from register
+ * Compare the values from command with ones from register
*/
static int onenand_probe(struct mtd_info *mtd)
{
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 9588da3..127f608 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -95,8 +95,7 @@ static int max_interrupt_work = 10;
#include <asm/io.h>
#include <asm/irq.h>
-static char versionA[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n";
-static char versionB[] __initdata = "http://www.scyld.com/network/3c509.html\n";
+static char version[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n";
#if defined(CONFIG_PM) && (defined(CONFIG_MCA) || defined(CONFIG_EISA))
#define EL3_SUSPEND
@@ -360,7 +359,7 @@ static int __init el3_common_init(struct net_device *dev)
printk(", IRQ %d.\n", dev->irq);
if (el3_debug > 0)
- printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB);
+ printk(KERN_INFO "%s", version);
return 0;
}
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 80924f7..f26ca33 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -103,7 +103,7 @@ static int vortex_debug = 1;
static char version[] __devinitdata =
-DRV_NAME ": Donald Becker and others. www.scyld.com/network/vortex.html\n";
+DRV_NAME ": Donald Becker and others.\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver ");
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index 18aba83..82d78ff 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -31,10 +31,8 @@
*/
-static const char versionA[] =
+static const char version[] =
"atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@scyld.com>\n";
-static const char versionB[] =
-" http://www.scyld.com/network/atp.html\n";
/* The user-configurable values.
These may be modified when a driver module is loaded.*/
@@ -324,7 +322,7 @@ static int __init atp_probe1(long ioaddr)
#ifndef MODULE
if (net_debug)
- printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB);
+ printk(KERN_INFO "%s", version);
#endif
printk(KERN_NOTICE "%s: Pocket adapter found at %#3lx, IRQ %d, SAPROM "
@@ -926,7 +924,7 @@ static void set_rx_mode_8012(struct net_device *dev)
static int __init atp_init_module(void) {
if (debug) /* Emit version even if no cards detected. */
- printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB);
+ printk(KERN_INFO "%s", version);
return atp_init();
}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 724bce5..223517d 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3461,7 +3461,7 @@ void bond_unregister_arp(struct bonding *bond)
/*---------------------------- Hashing Policies -----------------------------*/
/*
- * Hash for the the output device based upon layer 3 and layer 4 data. If
+ * Hash for the output device based upon layer 3 and layer 4 data. If
* the packet is a frag or not TCP or UDP, just use layer 3 data. If it is
* altogether not IP, mimic bond_xmit_hash_policy_l2()
*/
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 39654e1..4768023 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1126,7 +1126,7 @@ static void eepro_tx_timeout (struct net_device *dev)
printk (KERN_ERR "%s: transmit timed out, %s?\n", dev->name,
"network cable problem");
/* This is not a duplicate. One message for the console,
- one for the the log file */
+ one for the log file */
printk (KERN_DEBUG "%s: transmit timed out, %s?\n", dev->name,
"network cable problem");
eepro_complete_selreset(ioaddr);
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 6c267c3..98003419 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -28,7 +28,7 @@
*/
static const char * const version =
-"eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html\n"
+"eepro100.c:v1.09j-t 9/29/99 Donald Becker\n"
"eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others\n";
/* A few user-configurable values that apply to all boards.
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 4e3f14c..5e51794 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -93,8 +93,6 @@ static int rx_copybreak;
static char version[] __devinitdata =
DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>\n";
static char version2[] __devinitdata =
-" http://www.scyld.com/network/epic100.html\n";
-static char version3[] __devinitdata =
" (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
@@ -323,8 +321,8 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
#ifndef MODULE
static int printed_version;
if (!printed_version++)
- printk (KERN_INFO "%s" KERN_INFO "%s" KERN_INFO "%s",
- version, version2, version3);
+ printk (KERN_INFO "%s" KERN_INFO "%s",
+ version, version2);
#endif
card_idx++;
@@ -1596,8 +1594,8 @@ static int __init epic_init (void)
{
/* when a module, this is printed whether or not devices are found in probe */
#ifdef MODULE
- printk (KERN_INFO "%s" KERN_INFO "%s" KERN_INFO "%s",
- version, version2, version3);
+ printk (KERN_INFO "%s" KERN_INFO "%s",
+ version, version2);
#endif
return pci_register_driver(&epic_driver);
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 6e90619..36d2c7d 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -140,7 +140,7 @@ config BAYCOM_SER_HDX
modems that connect to a serial interface. The driver supports the
ser12 design in half-duplex mode. This is the old driver. It is
still provided in case your serial interface chip does not work with
- the full-duplex driver. This driver is depreciated. To configure
+ the full-duplex driver. This driver is deprecated. To configure
the driver, use the sethdlc utility available in the standard ax25
utilities package. For information on the modems, see
<http://www.baycom.de/> and
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 2ab173d..1e67720f 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -113,7 +113,7 @@
/* RxOver overflow in Recv FIFO */
/* SipRcv received serial gap (or other condition you set) */
/* Interrupts are enabled by writing a one to the IER register */
-/* Interrupts are cleared by writting a one to the ISR register */
+/* Interrupts are cleared by writing a one to the ISR register */
/* */
/* 6. The remaining registers: 0x6 and 0x3 appear to be */
/* reserved parts of 16 or 32 bit registersthe remainder */
diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c
index f15aebd..52c99d0 100644
--- a/drivers/net/ixgb/ixgb_ee.c
+++ b/drivers/net/ixgb/ixgb_ee.c
@@ -315,7 +315,7 @@ ixgb_wait_eeprom_command(struct ixgb_hw *hw)
* hw - Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*
* Returns:
diff --git a/drivers/net/meth.h b/drivers/net/meth.h
index 84960da..ea3b8fc 100644
--- a/drivers/net/meth.h
+++ b/drivers/net/meth.h
@@ -126,7 +126,7 @@ typedef struct rx_packet {
/* Note: when loopback is set this bit becomes collision control. Setting this bit will */
/* cause a collision to be reported. */
- /* Bits 5 and 6 are used to determine the the Destination address filter mode */
+ /* Bits 5 and 6 are used to determine the Destination address filter mode */
#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 223e0e6..4cf0d3f 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -131,7 +131,6 @@ static const char version[] __devinitdata =
KERN_INFO DRV_NAME " dp8381x driver, version "
DRV_VERSION ", " DRV_RELDATE "\n"
KERN_INFO " originally by Donald Becker <becker@scyld.com>\n"
- KERN_INFO " http://www.scyld.com/network/natsemi.html\n"
KERN_INFO " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index 589785d..995c0a5 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -63,8 +63,7 @@ static int options[MAX_UNITS];
/* These identify the driver base version and may not be removed. */
static char version[] __devinitdata =
-KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " D. Becker/P. Gortmaker\n"
-KERN_INFO " http://www.scyld.com/network/ne2k-pci.html\n";
+KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " D. Becker/P. Gortmaker\n";
#if defined(__powerpc__)
#define inl_le(addr) le32_to_cpu(inl(addr))
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index f51ba31..e1f912d 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -110,8 +110,7 @@ static char *media[MAX_UNITS];
/* These identify the driver base version and may not be removed. */
static char version[] =
-KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n"
-KERN_INFO " http://www.scyld.com/network/sundance.html\n";
+KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Sundance Alta Ethernet driver");
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index 9b08afb..ea89677 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -269,7 +269,7 @@ done:
This would turn on IM for devices that is not contributing
to backlog congestion with unnecessary latency.
- We monitor the the device RX-ring and have:
+ We monitor the device RX-ring and have:
HW Interrupt Mitigation either ON or OFF.
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index fa44070..38f3b99 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -1021,7 +1021,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
np->tx_ring[entry].length |= DescEndRing;
/* Now acquire the irq spinlock.
- * The difficult race is the the ordering between
+ * The difficult race is the ordering between
* increasing np->cur_tx and setting DescOwned:
* - if np->cur_tx is increased first the interrupt
* handler could consider the packet as transmitted
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 985a181..2470b1e 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -1043,7 +1043,7 @@ static int enable_promisc(struct xircom_private *card)
/*
-link_status() checks the the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what.
+link_status() checks the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what.
Must be called in locked state with interrupts disabled
*/
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index f2dd776..f725735 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -639,7 +639,7 @@ typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd,
typhoon_inc_cmd_index(&ring->lastWrite, num_cmd);
- /* "I feel a presence... another warrior is on the the mesa."
+ /* "I feel a presence... another warrior is on the mesa."
*/
wmb();
iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
diff --git a/drivers/net/wireless/airport.c b/drivers/net/wireless/airport.c
index 38fac3b..7d5b8c2 100644
--- a/drivers/net/wireless/airport.c
+++ b/drivers/net/wireless/airport.c
@@ -149,7 +149,7 @@ static int airport_hard_reset(struct orinoco_private *priv)
/* Vitally important. If we don't do this it seems we get an
* interrupt somewhere during the power cycle, since
* hw_unavailable is already set it doesn't get ACKed, we get
- * into an interrupt loop and the the PMU decides to turn us
+ * into an interrupt loop and the PMU decides to turn us
* off. */
disable_irq(dev->irq);
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index 841b3c1..283be4a 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -3054,7 +3054,7 @@ static const iw_handler prism54_handler[] = {
(iw_handler) prism54_set_wap, /* SIOCSIWAP */
(iw_handler) prism54_get_wap, /* SIOCGIWAP */
(iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* SIOCGIWAPLIST depreciated */
+ (iw_handler) NULL, /* SIOCGIWAPLIST deprecated */
(iw_handler) prism54_set_scan, /* SIOCSIWSCAN */
(iw_handler) prism54_get_scan, /* SIOCGIWSCAN */
(iw_handler) prism54_set_essid, /* SIOCSIWESSID */
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index a037b11..0847953 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -115,7 +115,7 @@ isl_upload_firmware(islpci_private *priv)
ISL38XX_MEMORY_WINDOW_SIZE : fw_len;
u32 __iomem *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN;
- /* set the cards base address for writting the data */
+ /* set the card's base address for writing the data */
isl38xx_w32_flush(device_base, reg,
ISL38XX_DIR_MEM_BASE_REG);
wmb(); /* be paranoid */
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 67b867f8..5740d4d 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -176,7 +176,7 @@ psa_write(struct net_device * dev,
volatile u_char __iomem *verify = lp->mem + PSA_ADDR +
(psaoff(0, psa_comp_number) << 1);
- /* Authorize writting to PSA */
+ /* Authorize writing to PSA */
hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN);
while(n-- > 0)
@@ -1676,7 +1676,7 @@ wv_set_frequency(u_long base, /* i/o port of the card */
fee_write(base, 0x60,
dac, 2);
- /* We now should verify here that the EEprom writting was ok */
+ /* We now should verify here that the EEprom writing was ok */
/* ReRead the first area */
fee_read(base, 0x00,
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
index 4d1c490..4b9de00 100644
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ b/drivers/net/wireless/wavelan_cs.p.h
@@ -120,7 +120,7 @@
* the Wavelan itself (NCR -> AT&T -> Lucent).
*
* All started with Anders Klemets <klemets@paul.rutgers.edu>,
- * writting a Wavelan ISA driver for the MACH microkernel. Girish
+ * writing a Wavelan ISA driver for the MACH microkernel. Girish
* Welling <welling@paul.rutgers.edu> had also worked on it.
* Keith Moore modify this for the Pcmcia hardware.
*
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 3f4a7cf..f2a90a7 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -109,7 +109,6 @@ static int gx_fix;
/* These identify the driver base version and may not be removed. */
static char version[] __devinitdata =
KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n"
-KERN_INFO " http://www.scyld.com/network/yellowfin.html\n"
KERN_INFO " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 3bb7739..8e58ea3 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -119,7 +119,7 @@ static inline int pci_create_newid_file(struct pci_driver *drv)
* system is in its list of supported devices. Returns the matching
* pci_device_id structure or %NULL if there is no match.
*
- * Depreciated, don't use this as it will not catch any dynamic ids
+ * Deprecated, don't use this as it will not catch any dynamic ids
* that a driver might want to check for.
*/
const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 5e43983..76422ed 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -98,7 +98,7 @@ config RTC_INTF_DEV_UIE_EMUL
bool "RTC UIE emulation on dev interface"
depends on RTC_INTF_DEV
help
- Provides an emulation for RTC_UIE if the underlaying rtc chip
+ Provides an emulation for RTC_UIE if the underlying rtc chip
driver does not expose RTC_UIE ioctls. Those requests generate
once-per-second update interrupts, used for synchronization.
diff --git a/drivers/s390/char/sclp_rw.c b/drivers/s390/char/sclp_rw.c
index bbd5b8b..d6b06ab 100644
--- a/drivers/s390/char/sclp_rw.c
+++ b/drivers/s390/char/sclp_rw.c
@@ -23,7 +23,7 @@
/*
* The room for the SCCB (only for writing) is not equal to a pages size
- * (as it is specified as the maximum size in the the SCLP documentation)
+ * (as it is specified as the maximum size in the SCLP documentation)
* because of the additional data structure described above.
*/
#define MAX_SCCB_ROOM (PAGE_SIZE - sizeof(struct sclp_buffer))
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index 29d1760..0b96d49 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -2860,7 +2860,7 @@ qeth_flush_buffers(struct qeth_qdio_out_q *queue, int under_int,
if (!atomic_read(&queue->set_pci_flags_count)){
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index cb08ca3..bdf5782 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -222,7 +222,7 @@ zfcp_qdio_handler_error_check(struct zfcp_adapter *adapter, unsigned int status,
* Since we have been using this adapter, it is save to assume
* that it is not failed but recoverable. The card seems to
* report link-up events by self-initiated queue shutdown.
- * That is why we need to clear the the link-down flag
+ * That is why we need to clear the link-down flag
* which is set again in case we have missed by a mile.
*/
zfcp_erp_adapter_reopen(
diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
index 74b999d..4fab0c2 100644
--- a/drivers/sbus/char/bpp.c
+++ b/drivers/sbus/char/bpp.c
@@ -156,7 +156,7 @@ static unsigned short get_pins(unsigned minor)
#define BPP_ICR 0x18
#define BPP_SIZE 0x1A
-/* BPP_CSR. Bits of type RW1 are cleared with writting '1'. */
+/* BPP_CSR. Bits of type RW1 are cleared with writing '1'. */
#define P_DEV_ID_MASK 0xf0000000 /* R */
#define P_DEV_ID_ZEBRA 0x40000000
#define P_DEV_ID_L64854 0xa0000000 /* == NCR 89C100+89C105. Pity. */
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c
index 8d72bba..0bada00 100644
--- a/drivers/scsi/aic7xxx/aic79xx_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -966,7 +966,7 @@ ahd_aic790X_setup(struct ahd_softc *ahd)
| AHD_BUSFREEREV_BUG;
ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG;
- /* If the user requested the the SLOWCRC bit to be set. */
+ /* If the user requested that the SLOWCRC bit to be set. */
if (aic79xx_slowcrc)
ahd->features |= AHD_AIC79XXB_SLOWCRC;
diff --git a/drivers/scsi/aic94xx/Makefile b/drivers/scsi/aic94xx/Makefile
index e6b7012..e78ce0f 100644
--- a/drivers/scsi/aic94xx/Makefile
+++ b/drivers/scsi/aic94xx/Makefile
@@ -6,7 +6,7 @@
#
# This file is licensed under GPLv2.
#
-# This file is part of the the aic94xx driver.
+# This file is part of the aic94xx driver.
#
# The aic94xx driver is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index a965ed3..564ea90 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -541,7 +541,7 @@ static struct ParameterData __devinitdata cfg_data[] = {
/*
- * Safe settings. If set to zero the the BIOS/default values with
+ * Safe settings. If set to zero the BIOS/default values with
* command line overrides will be used. If set to 1 then safe and
* slow settings will be used.
*/
@@ -617,7 +617,7 @@ static void __devinit fix_settings(void)
/*
* Mapping from the eeprom delay index value (index into this array)
- * to the the number of actual seconds that the delay should be for.
+ * to the number of actual seconds that the delay should be for.
*/
static char __devinitdata eeprom_index_to_delay_map[] =
{ 1, 3, 5, 10, 16, 30, 60, 120 };
@@ -4136,7 +4136,7 @@ static void __devinit trms1040_write_all(struct NvRamType *eeprom, unsigned long
* @io_port: base I/O address
* @addr: offset into SEEPROM
*
- * Returns the the byte read.
+ * Returns the byte read.
**/
static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr)
{
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 61fbcdc..1f5a07b 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -173,7 +173,7 @@ int scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
* @retries: number of times to retry request
* @flags: or into request flags;
*
- * returns the req->errors value which is the the scsi_cmnd result
+ * returns the req->errors value which is the scsi_cmnd result
* field.
**/
int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index b5332e6..88fb56d 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -1307,7 +1307,7 @@ static int auerswald_addservice (pauerswald_t cp, pauerscon_t scp)
}
-/* remove a service from the the device
+/* remove a service from the device
scp->id must be set! */
static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp)
{
diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h
index cbb53e0..82db5a8 100644
--- a/drivers/usb/net/usbnet.h
+++ b/drivers/usb/net/usbnet.h
@@ -129,7 +129,7 @@ extern void usbnet_disconnect(struct usb_interface *);
/* Drivers that reuse some of the standard USB CDC infrastructure
- * (notably, using multiple interfaces according to the the CDC
+ * (notably, using multiple interfaces according to the CDC
* union descriptor) get some helper code.
*/
struct cdc_state {
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index ba5d1dc..3efe670 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -558,7 +558,7 @@ config USB_SERIAL_DEBUG
tristate "USB Debugging Device"
depends on USB_SERIAL
help
- Say Y here if you have a USB debugging device used to recieve
+ Say Y here if you have a USB debugging device used to receive
debugging data from another machine. The most common of these
devices is the NetChip TurboCONNECT device.
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index b675735..fbc8c27 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -9,7 +9,7 @@
* The device works as an standard CDC device, it has 2 interfaces, the first
* one is for firmware access and the second is the serial one.
* The protocol is very simply, there are two posibilities reading or writing.
- * When writting the first urb must have a Header that starts with 0x20 0x29 the
+ * When writing the first urb must have a Header that starts with 0x20 0x29 the
* next two bytes must say how much data will be sended.
* When reading the process is almost equal except that the header starts with
* 0x00 0x20.
@@ -18,7 +18,7 @@
* buffer: The First and Second byte is used for a Header, the Third and Fourth
* tells the device the amount of information the package holds.
* Packages are 60 bytes long Header Stuff.
- * When writting to the device the first two bytes of the header are 0x20 0x29
+ * When writing to the device the first two bytes of the header are 0x20 0x29
* When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
* situation, when too much data arrives to the device because it sends the data
* but with out the header. I will use a simply hack to override this situation,
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 18f74ac..4807f96 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2465,7 +2465,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
((edge_serial->is_epic) &&
(!edge_serial->epic_descriptor.Supports.IOSPWriteMCR) &&
(regNum == MCR))) {
- dbg("SendCmdWriteUartReg - Not writting to MCR Register");
+ dbg("SendCmdWriteUartReg - Not writing to MCR Register");
return 0;
}
@@ -2473,7 +2473,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
((edge_serial->is_epic) &&
(!edge_serial->epic_descriptor.Supports.IOSPWriteLCR) &&
(regNum == LCR))) {
- dbg ("SendCmdWriteUartReg - Not writting to LCR Register");
+ dbg ("SendCmdWriteUartReg - Not writing to LCR Register");
return 0;
}
diff --git a/drivers/video/console/softcursor.c b/drivers/video/console/softcursor.c
index f577bd8..03cfb7a 100644
--- a/drivers/video/console/softcursor.c
+++ b/drivers/video/console/softcursor.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/video/softcursor.c
+ * linux/drivers/video/console/softcursor.c
*
* Generic software cursor for frame buffer devices
*
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 7e76019..1a7d778 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1717,7 +1717,7 @@ static int __devinit i810_alloc_agp_mem(struct fb_info *info)
* @info: pointer to device specific info structure
*
* DESCRIPTION:
- * Sets the the user monitor's horizontal and vertical
+ * Sets the user monitor's horizontal and vertical
* frequency limits
*/
static void __devinit i810_init_monspecs(struct fb_info *info)
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c
index a5690a5..9445cdb 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/matrox/matroxfb_Ti3026.c
@@ -72,7 +72,7 @@
* (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
*
* (following author is not in any relation with this code, but his ideas
- * were used when writting this driver)
+ * were used when writing this driver)
*
* FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
*
diff --git a/drivers/video/matrox/matroxfb_accel.c b/drivers/video/matrox/matroxfb_accel.c
index a5c825d..c57aaad 100644
--- a/drivers/video/matrox/matroxfb_accel.c
+++ b/drivers/video/matrox/matroxfb_accel.c
@@ -70,7 +70,7 @@
* (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
*
* (following author is not in any relation with this code, but his ideas
- * were used when writting this driver)
+ * were used when writing this driver)
*
* FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
*
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index cb2aa40..c8559a7 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -93,7 +93,7 @@
* (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
*
* (following author is not in any relation with this code, but his ideas
- * were used when writting this driver)
+ * were used when writing this driver)
*
* FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
*
diff --git a/drivers/video/matrox/matroxfb_misc.c b/drivers/video/matrox/matroxfb_misc.c
index 18886b6..5948e54 100644
--- a/drivers/video/matrox/matroxfb_misc.c
+++ b/drivers/video/matrox/matroxfb_misc.c
@@ -78,7 +78,7 @@
* (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
*
* (following author is not in any relation with this code, but his ideas
- * were used when writting this driver)
+ * were used when writing this driver)
*
* FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
*
diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c
index 842b5cd..836a612 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/skeletonfb.c
@@ -14,7 +14,7 @@
* of it.
*
* First the roles of struct fb_info and struct display have changed. Struct
- * display will go away. The way the the new framebuffer console code will
+ * display will go away. The way the new framebuffer console code will
* work is that it will act to translate data about the tty/console in
* struct vc_data to data in a device independent way in struct fb_info. Then
* various functions in struct fb_ops will be called to store the device
OpenPOWER on IntegriCloud