diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/scsi/sata_sil24.c | 107 |
1 files changed, 62 insertions, 45 deletions
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 04ae1ef..1850c2e 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -988,6 +988,64 @@ static void sil24_host_stop(struct ata_host_set *host_set) kfree(hpriv); } +static void sil24_init_controller(struct pci_dev *pdev, int n_ports, + unsigned long host_flags, + void __iomem *host_base, + void __iomem *port_base) +{ + u32 tmp; + int i; + + /* GPIO off */ + writel(0, host_base + HOST_FLASH_CMD); + + /* clear global reset & mask interrupts during initialization */ + writel(0, host_base + HOST_CTRL); + + /* init ports */ + for (i = 0; i < n_ports; i++) { + void __iomem *port = port_base + i * PORT_REGS_SIZE; + + /* Initial PHY setting */ + writel(0x20c, port + PORT_PHY_CFG); + + /* Clear port RST */ + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_PORT_RST) { + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_PORT_RST, + PORT_CS_PORT_RST, 10, 100); + if (tmp & PORT_CS_PORT_RST) + dev_printk(KERN_ERR, &pdev->dev, + "failed to clear port RST\n"); + } + + /* Configure IRQ WoC */ + if (host_flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); + else + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* Zero error counters. */ + writel(0x8000, port + PORT_DECODE_ERR_THRESH); + writel(0x8000, port + PORT_CRC_ERR_THRESH); + writel(0x8000, port + PORT_HSHK_ERR_THRESH); + writel(0x0000, port + PORT_DECODE_ERR_CNT); + writel(0x0000, port + PORT_CRC_ERR_CNT); + writel(0x0000, port + PORT_HSHK_ERR_CNT); + + /* Always use 64bit activation */ + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); + + /* Clear port multiplier enable and resume bits */ + writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); + } + + /* Turn on interrupts */ + writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); +} + static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; @@ -1076,9 +1134,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } - /* GPIO off */ - writel(0, host_base + HOST_FLASH_CMD); - /* Apply workaround for completion IRQ loss on PCI-X errata */ if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) { tmp = readl(host_base + HOST_CTRL); @@ -1090,56 +1145,18 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; } - /* clear global reset & mask interrupts during initialization */ - writel(0, host_base + HOST_CTRL); - for (i = 0; i < probe_ent->n_ports; i++) { - void __iomem *port = port_base + i * PORT_REGS_SIZE; - unsigned long portu = (unsigned long)port; + unsigned long portu = + (unsigned long)port_base + i * PORT_REGS_SIZE; probe_ent->port[i].cmd_addr = portu; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; ata_std_ports(&probe_ent->port[i]); - - /* Initial PHY setting */ - writel(0x20c, port + PORT_PHY_CFG); - - /* Clear port RST */ - tmp = readl(port + PORT_CTRL_STAT); - if (tmp & PORT_CS_PORT_RST) { - writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); - tmp = ata_wait_register(port + PORT_CTRL_STAT, - PORT_CS_PORT_RST, - PORT_CS_PORT_RST, 10, 100); - if (tmp & PORT_CS_PORT_RST) - dev_printk(KERN_ERR, &pdev->dev, - "failed to clear port RST\n"); - } - - /* Configure IRQ WoC */ - if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); - else - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); - - /* Zero error counters. */ - writel(0x8000, port + PORT_DECODE_ERR_THRESH); - writel(0x8000, port + PORT_CRC_ERR_THRESH); - writel(0x8000, port + PORT_HSHK_ERR_THRESH); - writel(0x0000, port + PORT_DECODE_ERR_CNT); - writel(0x0000, port + PORT_CRC_ERR_CNT); - writel(0x0000, port + PORT_HSHK_ERR_CNT); - - /* Always use 64bit activation */ - writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); - - /* Clear port multiplier enable and resume bits */ - writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); } - /* Turn on interrupts */ - writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); + sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + host_base, port_base); pci_set_master(pdev); |
