diff options
Diffstat (limited to 'drivers')
234 files changed, 3571 insertions, 1938 deletions
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index b6667ff..88b5a2c 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -543,6 +543,13 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, package_element = *top_object_list; + /* We must have a valid Package object */ + + if (!package_element || + (package_element->common.type != ACPI_TYPE_PACKAGE)) { + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + /* * The sub_object_list will now point to an array of the * four IRQ elements: Address, Pin, Source and source_index diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 942d14a..d51a17c 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -72,6 +72,7 @@ * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary * and must be dword aligned * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3 + * ICH7 errata #16 - MWDMA1 timings are incorrect * * Should have been BIOS fixed: * 450NX: errata #19 - DMA hangs on old 450NX @@ -94,7 +95,7 @@ #include <linux/dmi.h> #define DRV_NAME "ata_piix" -#define DRV_VERSION "2.12" +#define DRV_VERSION "2.13" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ @@ -136,6 +137,7 @@ enum piix_controller_ids { ich_pata_33, /* ICH up to UDMA 33 only */ ich_pata_66, /* ICH up to 66 Mhz */ ich_pata_100, /* ICH up to UDMA 100 */ + ich_pata_100_nomwdma1, /* ICH up to UDMA 100 but with no MWDMA1*/ ich5_sata, ich6_sata, ich6m_sata, @@ -216,8 +218,8 @@ static const struct pci_device_id piix_pci_tbl[] = { /* ICH6 (and 6) (i915) UDMA 100 */ { 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* ICH7/7-R (i945, i975) UDMA 100*/ - { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, - { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 }, + { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 }, /* ICH8 Mobile PATA Controller */ { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, @@ -487,6 +489,15 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &ich_pata_ops, }, + [ich_pata_100_nomwdma1] = + { + .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2_ONLY, + .udma_mask = ATA_UDMA5, + .port_ops = &ich_pata_ops, + }, + [ich5_sata] = { .flags = PIIX_SATA_FLAGS, @@ -594,6 +605,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ + { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */ /* end marker */ { 0, } }; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 17c5d48..c924230 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4091,7 +4091,9 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, /* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */ if (ata_class_enabled(new_class) && - new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) { + new_class != ATA_DEV_ATA && + new_class != ATA_DEV_ATAPI && + new_class != ATA_DEV_SEMB) { ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n", dev->class, new_class); rc = -ENODEV; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 0183131..94919ad 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2783,6 +2783,12 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, } else if (dev->class == ATA_DEV_UNKNOWN && ehc->tries[dev->devno] && ata_class_enabled(ehc->classes[dev->devno])) { + /* Temporarily set dev->class, it will be + * permanently set once all configurations are + * complete. This is necessary because new + * device configuration is done in two + * separate loops. + */ dev->class = ehc->classes[dev->devno]; if (dev->class == ATA_DEV_PMP) @@ -2790,6 +2796,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, else rc = ata_dev_read_id(dev, &dev->class, readid_flags, dev->id); + + /* read_id might have changed class, store and reset */ + ehc->classes[dev->devno] = dev->class; + dev->class = ATA_DEV_UNKNOWN; + switch (rc) { case 0: /* clear error info accumulated during probe */ @@ -2799,13 +2810,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, case -ENOENT: /* IDENTIFY was issued to non-existent * device. No need to reset. Just - * thaw and kill the device. + * thaw and ignore the device. */ ata_eh_thaw_port(ap); - dev->class = ATA_DEV_UNKNOWN; break; default: - dev->class = ATA_DEV_UNKNOWN; goto err; } } @@ -2826,11 +2835,15 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, dev->class == ATA_DEV_PMP) continue; + dev->class = ehc->classes[dev->devno]; + ehc->i.flags |= ATA_EHI_PRINTINFO; rc = ata_dev_configure(dev); ehc->i.flags &= ~ATA_EHI_PRINTINFO; - if (rc) + if (rc) { + dev->class = ATA_DEV_UNKNOWN; goto err; + } spin_lock_irqsave(ap->lock, flags); ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; @@ -3494,6 +3507,8 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap) */ static void ata_eh_handle_port_resume(struct ata_port *ap) { + struct ata_link *link; + struct ata_device *dev; unsigned long flags; int rc = 0; @@ -3508,6 +3523,17 @@ static void ata_eh_handle_port_resume(struct ata_port *ap) WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED)); + /* + * Error timestamps are in jiffies which doesn't run while + * suspended and PHY events during resume isn't too uncommon. + * When the two are combined, it can lead to unnecessary speed + * downs if the machine is suspended and resumed repeatedly. + * Clear error history. + */ + ata_for_each_link(link, ap, HOST_FIRST) + ata_for_each_dev(dev, link, ALL) + ata_ering_clear(&dev->ering); + ata_acpi_set_state(ap, PMSG_ON); if (ap->ops->port_resume) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 2733b0c..3423160 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -313,7 +313,7 @@ ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr, return ap->ops->em_show(ap, buf); return -EINVAL; } -DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO, +DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR, ata_scsi_em_message_show, ata_scsi_em_message_store); EXPORT_SYMBOL_GPL(dev_attr_em_message); @@ -366,7 +366,7 @@ ata_scsi_activity_store(struct device *dev, struct device_attribute *attr, } return -EINVAL; } -DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show, +DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show, ata_scsi_activity_store); EXPORT_SYMBOL_GPL(dev_attr_sw_activity); @@ -2142,13 +2142,14 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf) static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) { + int form_factor = ata_id_form_factor(args->id); + int media_rotation_rate = ata_id_rotation_rate(args->id); + rbuf[1] = 0xb1; rbuf[3] = 0x3c; - if (ata_id_major_version(args->id) > 7) { - rbuf[4] = args->id[217] >> 8; - rbuf[5] = args->id[217]; - rbuf[7] = args->id[168] & 0xf; - } + rbuf[4] = media_rotation_rate >> 8; + rbuf[5] = media_rotation_rate; + rbuf[7] = form_factor; return 0; } @@ -2376,7 +2377,23 @@ saving_not_supp: */ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) { - u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */ + struct ata_device *dev = args->dev; + u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */ + u8 log_per_phys = 0; + u16 lowest_aligned = 0; + u16 word_106 = dev->id[106]; + u16 word_209 = dev->id[209]; + + if ((word_106 & 0xc000) == 0x4000) { + /* Number and offset of logical sectors per physical sector */ + if (word_106 & (1 << 13)) + log_per_phys = word_106 & 0xf; + if ((word_209 & 0xc000) == 0x4000) { + u16 first = dev->id[209] & 0x3fff; + if (first > 0) + lowest_aligned = (1 << log_per_phys) - first; + } + } VPRINTK("ENTER\n"); @@ -2407,6 +2424,11 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) /* sector size */ rbuf[10] = ATA_SECT_SIZE >> 8; rbuf[11] = ATA_SECT_SIZE & 0xff; + + rbuf[12] = 0; + rbuf[13] = log_per_phys; + rbuf[14] = (lowest_aligned >> 8) & 0x3f; + rbuf[15] = lowest_aligned; } return 0; diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 5fedb3d..2f3c9be 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -2,7 +2,7 @@ * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer * (C) 2005 Red Hat Inc * Alan Cox <alan@lxorguk.ukuu.org.uk> - * (C) 2007 Bartlomiej Zolnierkiewicz + * (C) 2007,2009 Bartlomiej Zolnierkiewicz * * Based in part on linux/drivers/ide/pci/pdc202xx_old.c * @@ -158,7 +158,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) u32 len; /* Check we keep host level locking here */ - if (adev->dma_mode >= XFER_UDMA_2) + if (adev->dma_mode > XFER_UDMA_2) iowrite8(ioread8(clock) | sel66, clock); else iowrite8(ioread8(clock) & ~sel66, clock); @@ -212,7 +212,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) iowrite8(ioread8(clock) & ~sel66, clock); } /* Flip back to 33Mhz for PIO */ - if (adev->dma_mode >= XFER_UDMA_2) + if (adev->dma_mode > XFER_UDMA_2) iowrite8(ioread8(clock) & ~sel66, clock); ata_bmdma_stop(qc); pdc202xx_set_piomode(ap, adev); diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index c2e90e1..36b8629 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -205,6 +205,7 @@ struct cmdhdr_tbl_entry { * Description information bitdefs */ enum { + CMD_DESC_RES = (1 << 11), VENDOR_SPECIFIC_BIST = (1 << 10), CMD_DESC_SNOOP_ENABLE = (1 << 9), FPDMA_QUEUED_CMD = (1 << 8), @@ -332,13 +333,14 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, dma_addr_t sg_addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); - VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n", - sg_addr, sg_len); + VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n", + (unsigned long long)sg_addr, sg_len); /* warn if each s/g element is not dword aligned */ if (sg_addr & 0x03) ata_port_printk(qc->ap, KERN_ERR, - "s/g addr unaligned : 0x%x\n", sg_addr); + "s/g addr unaligned : 0x%llx\n", + (unsigned long long)sg_addr); if (sg_len & 0x03) ata_port_printk(qc->ap, KERN_ERR, "s/g len unaligned : 0x%x\n", sg_len); @@ -387,7 +389,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) void __iomem *hcr_base = host_priv->hcr_base; unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); struct command_desc *cd; - u32 desc_info = CMD_DESC_SNOOP_ENABLE; + u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE; u32 num_prde = 0; u32 ttl_dwords = 0; dma_addr_t cd_paddr; @@ -840,7 +842,7 @@ issue_srst: /* device reset/SRST is a control register update FIS, uses tag0 */ sata_fsl_setup_cmd_hdr_entry(pp, 0, - SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); + SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */ ata_tf_to_fis(&tf, pmp, 0, cfis); @@ -886,7 +888,8 @@ issue_srst: * using ATA signature D2H register FIS to the host controller. */ - sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5); + sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, + 0, 0, 5); tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */ ata_tf_to_fis(&tf, pmp, 0, cfis); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 870dcfd..23714ae 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -293,6 +293,10 @@ enum { FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */ FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */ + PHY_MODE9_GEN2 = 0x398, + PHY_MODE9_GEN1 = 0x39c, + PHYCFG_OFS = 0x3a0, /* only in 65n devices */ + MV5_PHY_MODE = 0x74, MV5_LTMODE = 0x30, MV5_PHY_CTL = 0x0C, @@ -609,6 +613,8 @@ static int mv_soc_reset_hc(struct mv_host_priv *hpriv, static void mv_soc_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio); +static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int port); static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio); static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no); @@ -807,6 +813,14 @@ static const struct mv_hw_ops mv_soc_ops = { .reset_bus = mv_soc_reset_bus, }; +static const struct mv_hw_ops mv_soc_65n_ops = { + .phy_errata = mv_soc_65n_phy_errata, + .enable_leds = mv_soc_enable_leds, + .reset_hc = mv_soc_reset_hc, + .reset_flash = mv_soc_reset_flash, + .reset_bus = mv_soc_reset_bus, +}; + /* * Functions */ @@ -3397,6 +3411,53 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio) return; } +static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + u32 reg; + + reg = readl(port_mmio + PHY_MODE3); + reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */ + reg |= (0x1 << 27); + reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */ + reg |= (0x1 << 29); + writel(reg, port_mmio + PHY_MODE3); + + reg = readl(port_mmio + PHY_MODE4); + reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */ + reg |= (0x1 << 16); + writel(reg, port_mmio + PHY_MODE4); + + reg = readl(port_mmio + PHY_MODE9_GEN2); + reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */ + reg |= 0x8; + reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */ + writel(reg, port_mmio + PHY_MODE9_GEN2); + + reg = readl(port_mmio + PHY_MODE9_GEN1); + reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */ + reg |= 0x8; + reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */ + writel(reg, port_mmio + PHY_MODE9_GEN1); +} + +/** + * soc_is_65 - check if the soc is 65 nano device + * + * Detect the type of the SoC, this is done by reading the PHYCFG_OFS + * register, this register should contain non-zero value and it exists only + * in the 65 nano devices, when reading it from older devices we get 0. + */ +static bool soc_is_65n(struct mv_host_priv *hpriv) +{ + void __iomem *port0_mmio = mv_port_base(hpriv->base, 0); + + if (readl(port0_mmio + PHYCFG_OFS)) + return true; + return false; +} + static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i) { u32 ifcfg = readl(port_mmio + SATA_IFCFG); @@ -3737,7 +3798,10 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) } break; case chip_soc: - hpriv->ops = &mv_soc_ops; + if (soc_is_65n(hpriv)) + hpriv->ops = &mv_soc_65n_ops; + else + hpriv->ops = &mv_soc_ops; hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE | MV_HP_ERRATA_60X1C0; break; @@ -3800,7 +3864,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) n_hc = mv_get_hc_count(host->ports[0]->flags); for (port = 0; port < host->n_ports; port++) - hpriv->ops->read_preamp(hpriv, port, mmio); + if (hpriv->ops->read_preamp) + hpriv->ops->read_preamp(hpriv, port, mmio); rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc); if (rc) diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index dce3dcc..eb05a3c 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -213,8 +213,9 @@ struct pdc_host_priv { static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); -static void pdc_eng_timeout(struct ata_port *ap); -static void pdc_20621_phy_reset(struct ata_port *ap); +static void pdc_error_handler(struct ata_port *ap); +static void pdc_freeze(struct ata_port *ap); +static void pdc_thaw(struct ata_port *ap); static int pdc_port_start(struct ata_port *ap); static void pdc20621_qc_prep(struct ata_queued_cmd *qc); static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); @@ -233,6 +234,10 @@ static void pdc20621_put_to_dimm(struct ata_host *host, void *psource, u32 offset, u32 size); static void pdc20621_irq_clear(struct ata_port *ap); static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc); +static int pdc_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void pdc_post_internal_cmd(struct ata_queued_cmd *qc); +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc); static struct scsi_host_template pdc_sata_sht = { @@ -243,20 +248,24 @@ static struct scsi_host_template pdc_sata_sht = { /* TODO: inherit from base port_ops after converting to new EH */ static struct ata_port_operations pdc_20621_ops = { - .sff_tf_load = pdc_tf_load_mmio, - .sff_tf_read = ata_sff_tf_read, - .sff_check_status = ata_sff_check_status, - .sff_exec_command = pdc_exec_command_mmio, - .sff_dev_select = ata_sff_dev_select, - .phy_reset = pdc_20621_phy_reset, + .inherits = &ata_sff_port_ops, + + .check_atapi_dma = pdc_check_atapi_dma, .qc_prep = pdc20621_qc_prep, .qc_issue = pdc20621_qc_issue, - .qc_fill_rtf = ata_sff_qc_fill_rtf, - .sff_data_xfer = ata_sff_data_xfer, - .eng_timeout = pdc_eng_timeout, - .sff_irq_clear = pdc20621_irq_clear, - .sff_irq_on = ata_sff_irq_on, + + .freeze = pdc_freeze, + .thaw = pdc_thaw, + .softreset = pdc_softreset, + .error_handler = pdc_error_handler, + .lost_interrupt = ATA_OP_NULL, + .post_internal_cmd = pdc_post_internal_cmd, + .port_start = pdc_port_start, + + .sff_tf_load = pdc_tf_load_mmio, + .sff_exec_command = pdc_exec_command_mmio, + .sff_irq_clear = pdc20621_irq_clear, }; static const struct ata_port_info pdc_port_info[] = { @@ -310,14 +319,6 @@ static int pdc_port_start(struct ata_port *ap) return 0; } -static void pdc_20621_phy_reset(struct ata_port *ap) -{ - VPRINTK("ENTER\n"); - ap->cbl = ATA_CBL_SATA; - ata_port_probe(ap); - ata_bus_reset(ap); -} - static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf, unsigned int portno, unsigned int total_len) @@ -686,8 +687,11 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc) static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc) { switch (qc->tf.protocol) { - case ATA_PROT_DMA: case ATA_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + break; + /*FALLTHROUGH*/ + case ATA_PROT_DMA: pdc20621_packet_start(qc); return 0; @@ -786,12 +790,7 @@ static inline unsigned int pdc20621_host_intr(struct ata_port *ap, static void pdc20621_irq_clear(struct ata_port *ap) { - struct ata_host *host = ap->host; - void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; - - mmio += PDC_CHIP0_OFS; - - readl(mmio + PDC_20621_SEQMASK); + ioread8(ap->ioaddr.status_addr); } static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance) @@ -859,46 +858,119 @@ static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance) return IRQ_RETVAL(handled); } -static void pdc_eng_timeout(struct ata_port *ap) +static void pdc_freeze(struct ata_port *ap) { - u8 drv_stat; - struct ata_host *host = ap->host; - struct ata_queued_cmd *qc; - unsigned long flags; + void __iomem *mmio = ap->ioaddr.cmd_addr; + u32 tmp; - DPRINTK("ENTER\n"); + /* FIXME: if all 4 ATA engines are stopped, also stop HDMA engine */ - spin_lock_irqsave(&host->lock, flags); + tmp = readl(mmio + PDC_CTLSTAT); + tmp |= PDC_MASK_INT; + tmp &= ~PDC_DMA_ENABLE; + writel(tmp, mmio + PDC_CTLSTAT); + readl(mmio + PDC_CTLSTAT); /* flush */ +} - qc = ata_qc_from_tag(ap, ap->link.active_tag); +static void pdc_thaw(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.cmd_addr; + u32 tmp; - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - ata_port_printk(ap, KERN_ERR, "command timeout\n"); - qc->err_mask |= __ac_err_mask(ata_wait_idle(ap)); - break; + /* FIXME: start HDMA engine, if zero ATA engines running */ - default: - drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); + /* clear IRQ */ + ioread8(ap->ioaddr.status_addr); - ata_port_printk(ap, KERN_ERR, - "unknown timeout, cmd 0x%x stat 0x%x\n", - qc->tf.command, drv_stat); + /* turn IRQ back on */ + tmp = readl(mmio + PDC_CTLSTAT); + tmp &= ~PDC_MASK_INT; + writel(tmp, mmio + PDC_CTLSTAT); + readl(mmio + PDC_CTLSTAT); /* flush */ +} - qc->err_mask |= ac_err_mask(drv_stat); - break; +static void pdc_reset_port(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT; + unsigned int i; + u32 tmp; + + /* FIXME: handle HDMA copy engine */ + + for (i = 11; i > 0; i--) { + tmp = readl(mmio); + if (tmp & PDC_RESET) + break; + + udelay(100); + + tmp |= PDC_RESET; + writel(tmp, mmio); } - spin_unlock_irqrestore(&host->lock, flags); - ata_eh_qc_complete(qc); - DPRINTK("EXIT\n"); + tmp &= ~PDC_RESET; + writel(tmp, mmio); + readl(mmio); /* flush */ +} + +static int pdc_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + pdc_reset_port(link->ap); + return ata_sff_softreset(link, class, deadline); +} + +static void pdc_error_handler(struct ata_port *ap) +{ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) + pdc_reset_port(ap); + + ata_std_error_handler(ap); +} + +static void pdc_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* make DMA engine forget about the failed command */ + if (qc->flags & ATA_QCFLAG_FAILED) + pdc_reset_port(ap); +} + +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc) +{ + u8 *scsicmd = qc->scsicmd->cmnd; + int pio = 1; /* atapi dma off by default */ + + /* Whitelist commands that may use DMA. */ + switch (scsicmd[0]) { + case WRITE_12: + case WRITE_10: + case WRITE_6: + case READ_12: + case READ_10: + case READ_6: + case 0xad: /* READ_DVD_STRUCTURE */ + case 0xbe: /* READ_CD */ + pio = 0; + } + /* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */ + if (scsicmd[0] == WRITE_10) { + unsigned int lba = + (scsicmd[2] << 24) | + (scsicmd[3] << 16) | + (scsicmd[4] << 8) | + scsicmd[5]; + if (lba >= 0xFFFF4FA2) + pio = 1; + } + return pio; } static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON(tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); + tf->protocol == ATAPI_PROT_DMA); ata_sff_tf_load(ap, tf); } @@ -906,7 +978,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON(tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); + tf->protocol == ATAPI_PROT_DMA); ata_sff_exec_command(ap, tf); } diff --git a/drivers/base/iommu.c b/drivers/base/iommu.c index 9f0e672..8ad4ffe 100644 --- a/drivers/base/iommu.c +++ b/drivers/base/iommu.c @@ -18,6 +18,8 @@ #include <linux/bug.h> #include <linux/types.h> +#include <linux/module.h> +#include <linux/slab.h> #include <linux/errno.h> #include <linux/iommu.h> diff --git a/drivers/base/platform.c b/drivers/base/platform.c index b5b6c97..8b4708e 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -217,7 +217,6 @@ int platform_device_add_data(struct platform_device *pdev, const void *data, if (d) { memcpy(d, data, size); pdev->dev.platform_data = d; - pdev->platform_data = d; } return d ? 0 : -ENOMEM; } @@ -247,21 +246,6 @@ int platform_device_add(struct platform_device *pdev) else dev_set_name(&pdev->dev, pdev->name); - /* We will remove platform_data field from struct device - * if all platform devices pass its platform specific data - * from platform_device. The conversion is going to be a - * long time, so we allow the two cases coexist to make - * this kind of fix more easily*/ - if (pdev->platform_data && pdev->dev.platform_data) { - printk(KERN_ERR - "%s: use which platform_data?\n", - dev_name(&pdev->dev)); - } else if (pdev->platform_data) { - pdev->dev.platform_data = pdev->platform_data; - } else if (pdev->dev.platform_data) { - pdev->platform_data = pdev->dev.platform_data; - } - for (i = 0; i < pdev->num_resources; i++) { struct resource *p, *r = &pdev->resource[i]; @@ -1028,7 +1012,7 @@ static __initdata LIST_HEAD(early_platform_device_list); /** * early_platform_driver_register - * @edrv: early_platform driver structure + * @epdrv: early_platform driver structure * @buf: string passed from early_param() */ int __init early_platform_driver_register(struct early_platform_driver *epdrv, @@ -1112,7 +1096,7 @@ void __init early_platform_driver_register_all(char *class_str) /** * early_platform_match - * @edrv: early platform driver structure + * @epdrv: early platform driver structure * @id: id to match against */ static __init struct platform_device * @@ -1130,7 +1114,7 @@ early_platform_match(struct early_platform_driver *epdrv, int id) /** * early_platform_left - * @edrv: early platform driver structure + * @epdrv: early platform driver structure * @id: return true if id or above exists */ static __init int early_platform_left(struct early_platform_driver *epdrv, diff --git a/drivers/char/random.c b/drivers/char/random.c index f824ef8..b2ced39 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1665,15 +1665,20 @@ EXPORT_SYMBOL(secure_dccp_sequence_number); * value is not cryptographically secure but for several uses the cost of * depleting entropy is too high */ +DEFINE_PER_CPU(__u32 [4], get_random_int_hash); unsigned int get_random_int(void) { - /* - * Use IP's RNG. It suits our purpose perfectly: it re-keys itself - * every second, from the entropy pool (and thus creates a limited - * drain on it), and uses halfMD4Transform within the second. We - * also mix it with jiffies and the PID: - */ - return secure_ip_id((__force __be32)(current->pid + jiffies)); + struct keydata *keyptr; + __u32 *hash = get_cpu_var(get_random_int_hash); + int ret; + + keyptr = get_keyptr(); + hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret; + + ret = half_md4_transform(hash, keyptr->secret); + put_cpu_var(get_random_int_hash); + + return ret; } /* diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index aed2b29..39a05b5 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -408,7 +408,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = { &sysrq_showlocks_op, /* d */ &sysrq_term_op, /* e */ &sysrq_moom_op, /* f */ - /* g: May be registered by ppc for kgdb */ + /* g: May be registered for the kernel debugger */ NULL, /* g */ NULL, /* h - reserved for help */ &sysrq_kill_op, /* i */ @@ -433,7 +433,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = { &sysrq_sync_op, /* s */ &sysrq_showstate_op, /* t */ &sysrq_mountro_op, /* u */ - /* v: May be registered at init time by SMP VOYAGER */ + /* v: May be registered for frame buffer console restore */ NULL, /* v */ &sysrq_showstate_blocked_op, /* w */ /* x: May be registered on ppc/powerpc for xmon */ diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index a2dee0e..e6ce632 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -400,6 +400,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, case KIOCSOUND: if (!perm) goto eperm; + /* FIXME: This is an old broken API but we need to keep it + supported and somehow separate the historic advertised + tick rate from any real one */ if (arg) arg = CLOCK_TICK_RATE / arg; kd_mksound(arg, 0); @@ -417,6 +420,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, */ ticks = HZ * ((arg >> 16) & 0xffff) / 1000; count = ticks ? (arg & 0xffff) : 0; + /* FIXME: This is an old broken API but we need to keep it + supported and somehow separate the historic advertised + tick rate from any real one */ if (count) count = CLOCK_TICK_RATE / count; kd_mksound(count, ticks); diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 92438e9..5a87384 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -804,11 +804,14 @@ dma_async_memcpy_buf_to_buf(struct dma_chan *chan, void *dest, dma_addr_t dma_dest, dma_src; dma_cookie_t cookie; int cpu; + unsigned long flags; dma_src = dma_map_single(dev->dev, src, len, DMA_TO_DEVICE); dma_dest = dma_map_single(dev->dev, dest, len, DMA_FROM_DEVICE); - tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, - DMA_CTRL_ACK); + flags = DMA_CTRL_ACK | + DMA_COMPL_SRC_UNMAP_SINGLE | + DMA_COMPL_DEST_UNMAP_SINGLE; + tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags); if (!tx) { dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE); @@ -850,11 +853,12 @@ dma_async_memcpy_buf_to_pg(struct dma_chan *chan, struct page *page, dma_addr_t dma_dest, dma_src; dma_cookie_t cookie; int cpu; + unsigned long flags; dma_src = dma_map_single(dev->dev, kdata, len, DMA_TO_DEVICE); dma_dest = dma_map_page(dev->dev, page, offset, len, DMA_FROM_DEVICE); - tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, - DMA_CTRL_ACK); + flags = DMA_CTRL_ACK | DMA_COMPL_SRC_UNMAP_SINGLE; + tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags); if (!tx) { dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE); @@ -898,12 +902,13 @@ dma_async_memcpy_pg_to_pg(struct dma_chan *chan, struct page *dest_pg, dma_addr_t dma_dest, dma_src; dma_cookie_t cookie; int cpu; + unsigned long flags; dma_src = dma_map_page(dev->dev, src_pg, src_off, len, DMA_TO_DEVICE); dma_dest = dma_map_page(dev->dev, dest_pg, dest_off, len, DMA_FROM_DEVICE); - tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, - DMA_CTRL_ACK); + flags = DMA_CTRL_ACK; + tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags); if (!tx) { dma_unmap_page(dev->dev, dma_src, len, DMA_TO_DEVICE); diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index a27c0fb..fb7da51 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -531,9 +531,7 @@ static int __init dmatest_init(void) chan = dma_request_channel(mask, filter, NULL); if (chan) { err = dmatest_add_channel(chan); - if (err == 0) - continue; - else { + if (err) { dma_release_channel(chan); break; /* add_channel failed, punt */ } diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index e4fc33c..1955ee8 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1063,22 +1063,31 @@ static void ioat_dma_cleanup_tasklet(unsigned long data) static void ioat_dma_unmap(struct ioat_dma_chan *ioat_chan, struct ioat_desc_sw *desc) { - /* - * yes we are unmapping both _page and _single - * alloc'd regions with unmap_page. Is this - * *really* that bad? - */ - if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) - pci_unmap_page(ioat_chan->device->pdev, - pci_unmap_addr(desc, dst), - pci_unmap_len(desc, len), - PCI_DMA_FROMDEVICE); - - if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) - pci_unmap_page(ioat_chan->device->pdev, - pci_unmap_addr(desc, src), - pci_unmap_len(desc, len), - PCI_DMA_TODEVICE); + if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (desc->async_tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) + pci_unmap_single(ioat_chan->device->pdev, + pci_unmap_addr(desc, dst), + pci_unmap_len(desc, len), + PCI_DMA_FROMDEVICE); + else + pci_unmap_page(ioat_chan->device->pdev, + pci_unmap_addr(desc, dst), + pci_unmap_len(desc, len), + PCI_DMA_FROMDEVICE); + } + + if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (desc->async_tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) + pci_unmap_single(ioat_chan->device->pdev, + pci_unmap_addr(desc, src), + pci_unmap_len(desc, len), + PCI_DMA_TODEVICE); + else + pci_unmap_page(ioat_chan->device->pdev, + pci_unmap_addr(desc, src), + pci_unmap_len(desc, len), + PCI_DMA_TODEVICE); + } } /** @@ -1363,6 +1372,7 @@ static int ioat_dma_self_test(struct ioatdma_device *device) int err = 0; struct completion cmp; unsigned long tmo; + unsigned long flags; src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL); if (!src) @@ -1392,8 +1402,9 @@ static int ioat_dma_self_test(struct ioatdma_device *device) DMA_TO_DEVICE); dma_dest = dma_map_single(dma_chan->device->dev, dest, IOAT_TEST_SIZE, DMA_FROM_DEVICE); + flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE; tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src, - IOAT_TEST_SIZE, 0); + IOAT_TEST_SIZE, flags); if (!tx) { dev_err(&device->pdev->dev, "Self-test prep failed, disabling\n"); diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index e202a6c..9a5bc1a 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1272,7 +1272,8 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id) /* Other interrupts do not interfere with this channel */ spin_lock(&ichan->lock); if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 && - ((curbuf >> chan_id) & 1) == ichan->active_buffer)) { + ((curbuf >> chan_id) & 1) == ichan->active_buffer && + !list_is_last(ichan->queue.next, &ichan->queue))) { int i = 100; /* This doesn't help. See comment in ipu_disable_channel() */ @@ -1547,7 +1548,7 @@ static irqreturn_t ic_sof_irq(int irq, void *dev_id) struct idmac_channel *ichan = dev_id; printk(KERN_DEBUG "Got SOF IRQ %d on Channel %d\n", irq, ichan->dma_chan.chan_id); - disable_irq(irq); + disable_irq_nosync(irq); return IRQ_HANDLED; } @@ -1556,7 +1557,7 @@ static irqreturn_t ic_eof_irq(int irq, void *dev_id) struct idmac_channel *ichan = dev_id; printk(KERN_DEBUG "Got EOF IRQ %d on Channel %d\n", irq, ichan->dma_chan.chan_id); - disable_irq(irq); + disable_irq_nosync(irq); return IRQ_HANDLED; } diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index 7b7ddc2..420a96e 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -754,11 +754,11 @@ static int __init ibft_check_nic_for(struct ibft_nic *nic, int entry) rc = 1; break; case ibft_eth_ip_addr: - if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp))) + if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr))) rc = 1; break; case ibft_eth_subnet_mask: - if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp))) + if (nic->subnet_mask_prefix) rc = 1; break; case ibft_eth_origin: diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 3a22eb9..17b24c5 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -71,6 +71,7 @@ config DRM_I915 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB + select FRAMEBUFFER_CONSOLE if !EMBEDDED tristate "i915 driver" help Choose this option if you have a system that has Intel 830M, 845G, diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index a04639d..4589044 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -561,7 +561,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, int saved_x, saved_y; struct drm_encoder *encoder; bool ret = true; - bool depth_changed, bpp_changed; adjusted_mode = drm_mode_duplicate(dev, mode); @@ -570,15 +569,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, if (!crtc->enabled) return true; - if (old_fb && crtc->fb) { - depth_changed = (old_fb->depth != crtc->fb->depth); - bpp_changed = (old_fb->bits_per_pixel != - crtc->fb->bits_per_pixel); - } else { - depth_changed = true; - bpp_changed = true; - } - saved_mode = crtc->mode; saved_x = crtc->x; saved_y = crtc->y; @@ -590,15 +580,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, crtc->x = x; crtc->y = y; - if (drm_mode_equal(&saved_mode, &crtc->mode)) { - if (saved_x != crtc->x || saved_y != crtc->y || - depth_changed || bpp_changed) { - ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, - old_fb); - goto done; - } - } - /* Pass our mode to the connectors and the CRTC to give them a chance to * adjust it according to limitations or connector properties, and also * a chance to reject the mode entirely. diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index c4ada8b..f01def1 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -456,7 +456,8 @@ int drm_ioctl(struct inode *inode, struct file *filp, retcode = -EINVAL; } else if (((ioctl->flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)) || ((ioctl->flags & DRM_AUTH) && !file_priv->authenticated) || - ((ioctl->flags & DRM_MASTER) && !file_priv->is_master)) { + ((ioctl->flags & DRM_MASTER) && !file_priv->is_master) || + (!(ioctl->flags & DRM_CONTROL_ALLOW) && (file_priv->minor->type == DRM_MINOR_CONTROL))) { retcode = -EACCES; } else { if (cmd & (IOC_IN | IOC_OUT)) { diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index ef87861..b9631e3 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -402,14 +402,14 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, if (dev->driver->load) { ret = dev->driver->load(dev, ent->driver_data); if (ret) - goto err_g3; + goto err_g4; } /* setup the grouping for the legacy output */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group); if (ret) - goto err_g3; + goto err_g4; } list_add_tail(&dev->driver_item, &driver->device_list); @@ -420,8 +420,11 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, return 0; -err_g3: +err_g4: drm_put_minor(&dev->primary); +err_g3: + if (drm_core_check_feature(dev, DRIVER_MODESET)) + drm_put_minor(&dev->control); err_g2: pci_disable_device(pdev); err_g1: @@ -502,11 +505,11 @@ void drm_put_dev(struct drm_device *dev) dev->agp = NULL; } - drm_ht_remove(&dev->map_hash); - drm_ctxbitmap_cleanup(dev); - list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) drm_rmmap(dev, r_list->map); + drm_ht_remove(&dev->map_hash); + + drm_ctxbitmap_cleanup(dev); if (drm_core_check_feature(dev, DRIVER_MODESET)) drm_put_minor(&dev->control); diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 022876a..8f93729 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -489,9 +489,7 @@ int drm_sysfs_device_add(struct drm_minor *minor) return 0; - device_unregister(&minor->kdev); err_out: - return err; } diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 051134c..53d5445 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1011,8 +1011,16 @@ static int i915_load_modeset_init(struct drm_device *dev) /* Basic memrange allocator for stolen space (aka vram) */ drm_mm_init(&dev_priv->vram, 0, prealloc_size); - /* Let GEM Manage from end of prealloc space to end of aperture */ - i915_gem_do_init(dev, prealloc_size, agp_size); + /* Let GEM Manage from end of prealloc space to end of aperture. + * + * However, leave one page at the end still bound to the scratch page. + * There are a number of places where the hardware apparently + * prefetches past the end of the object, and we've seen multiple + * hangs with the GPU head pointer stuck in a batchbuffer bound + * at the last page of the aperture. One page should be enough to + * keep any prefetching inside of the aperture. + */ + i915_gem_do_init(dev, prealloc_size, agp_size - 4096); ret = i915_gem_init_ringbuffer(dev); if (ret) @@ -1350,6 +1358,7 @@ struct drm_ioctl_desc i915_ioctls[] = { DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0), DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0), DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0), + DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0), }; int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 2506592..9b149fe 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -283,6 +283,7 @@ typedef struct drm_i915_private { u8 saveAR[21]; u8 saveDACMASK; u8 saveCR[37]; + uint64_t saveFENCE[16]; struct { struct drm_mm gtt_space; @@ -705,13 +706,8 @@ extern void intel_modeset_cleanup(struct drm_device *dev); #define I915_WRITE16(reg, val) writel(val, dev_priv->regs + (reg)) #define I915_READ8(reg) readb(dev_priv->regs + (reg)) #define I915_WRITE8(reg, val) writeb(val, dev_priv->regs + (reg)) -#ifdef writeq #define I915_WRITE64(reg, val) writeq(val, dev_priv->regs + (reg)) -#else -#define I915_WRITE64(reg, val) (writel(val, dev_priv->regs + (reg)), \ - writel(upper_32_bits(val), dev_priv->regs + \ - (reg) + 4)) -#endif +#define I915_READ64(reg) readq(dev_priv->regs + (reg)) #define POSTING_READ(reg) (void)I915_READ(reg) #define I915_VERBOSE 0 @@ -790,7 +786,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); (dev)->pci_device == 0x2E22 || \ (dev)->pci_device == 0x2E32) -#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) +#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \ + (dev)->pci_device == 0x2A12) #define IS_GM45(dev) ((dev)->pci_device == 0x2A42) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ee896d9..b189b49c 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1691,11 +1691,20 @@ static int i915_wait_request(struct drm_device *dev, uint32_t seqno) { drm_i915_private_t *dev_priv = dev->dev_private; + u32 ier; int ret = 0; BUG_ON(seqno == 0); if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) { + ier = I915_READ(IER); + if (!ier) { + DRM_ERROR("something (likely vbetool) disabled " + "interrupts, re-enabling\n"); + i915_driver_irq_preinstall(dev); + i915_driver_irq_postinstall(dev); + } + dev_priv->mm.waiting_gem_seqno = seqno; i915_user_irq_get(dev); ret = wait_event_interruptible(dev_priv->irq_queue, diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5211947..15da44c 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -526,6 +526,7 @@ #define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) #define D_STATE 0x6104 #define CG_2D_DIS 0x6200 +#define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24) #define CG_3D_DIS 0x6204 /* diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index d669cc2..ce8a213 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -349,6 +349,18 @@ int i915_save_state(struct drm_device *dev) for (i = 0; i < 3; i++) dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2)); + /* Fences */ + if (IS_I965G(dev)) { + for (i = 0; i < 16; i++) + dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8)); + } else { + for (i = 0; i < 8; i++) + dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4)); + + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + for (i = 0; i < 8; i++) + dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4)); + } i915_save_vga(dev); return 0; @@ -371,6 +383,18 @@ int i915_restore_state(struct drm_device *dev) /* Display arbitration */ I915_WRITE(DSPARB, dev_priv->saveDSPARB); + /* Fences */ + if (IS_I965G(dev)) { + for (i = 0; i < 16; i++) + I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]); + } else { + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]); + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]); + } + /* Pipe & plane A info */ /* Prime the clock */ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 9bdd959..19148c3 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -161,7 +161,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector) hotplug_en &= CRT_FORCE_HOTPLUG_MASK; hotplug_en |= CRT_HOTPLUG_FORCE_DETECT; - if (IS_GM45(dev)) + if (IS_G4X(dev)) hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bdcda36..3387cf3 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1804,6 +1804,37 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) } } +int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data; + struct drm_crtc *crtc = NULL; + int pipe = -1; + + if (!dev_priv) { + DRM_ERROR("called with no initialization\n"); + return -EINVAL; + } + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + if (crtc->base.id == pipe_from_crtc_id->crtc_id) { + pipe = intel_crtc->pipe; + break; + } + } + + if (pipe == -1) { + DRM_ERROR("no such CRTC id\n"); + return -EINVAL; + } + + pipe_from_crtc_id->pipe = pipe; + + return 0; +} + struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe) { struct drm_crtc *crtc = NULL; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 957daef..cd4b9c5 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -109,7 +109,7 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, void intel_i2c_destroy(struct intel_i2c_chan *chan); int intel_ddc_get_modes(struct intel_output *intel_output); extern bool intel_ddc_probe(struct intel_output *intel_output); - +void intel_i2c_quirk_set(struct drm_device *dev, bool enable); extern void intel_crt_init(struct drm_device *dev); extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg); extern bool intel_sdvo_init(struct drm_device *dev, int output_device); @@ -125,6 +125,8 @@ extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector); extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, struct drm_crtc *crtc); +int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, + struct drm_file *file_priv); extern void intel_wait_for_vblank(struct drm_device *dev); extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe); extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output, diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 3e094be..e4652dc 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -864,7 +864,7 @@ static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3) static struct sysrq_key_op sysrq_intelfb_restore_op = { .handler = intelfb_sysrq, - .help_msg = "force-fb(G)", + .help_msg = "force-fb(V)", .action_msg = "Restore framebuffer console", }; @@ -898,7 +898,7 @@ int intelfb_probe(struct drm_device *dev) ret = intelfb_single_fb_probe(dev); } - register_sysrq_key('g', &sysrq_intelfb_restore_op); + register_sysrq_key('v', &sysrq_intelfb_restore_op); return ret; } diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 5503742..d0983bb 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -155,11 +155,18 @@ intel_hdmi_detect(struct drm_connector *connector) temp = I915_READ(PORT_HOTPLUG_EN); - I915_WRITE(PORT_HOTPLUG_EN, - temp | - HDMIB_HOTPLUG_INT_EN | - HDMIC_HOTPLUG_INT_EN | - HDMID_HOTPLUG_INT_EN); + switch (hdmi_priv->sdvox_reg) { + case SDVOB: + temp |= HDMIB_HOTPLUG_INT_EN; + break; + case SDVOC: + temp |= HDMIC_HOTPLUG_INT_EN; + break; + default: + return connector_status_unknown; + } + + I915_WRITE(PORT_HOTPLUG_EN, temp); POSTING_READ(PORT_HOTPLUG_EN); diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 5ee9d4c..f7061f6 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -34,6 +34,21 @@ #include "i915_drm.h" #include "i915_drv.h" +void intel_i2c_quirk_set(struct drm_device *dev, bool enable) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* When using bit bashing for I2C, this bit needs to be set to 1 */ + if (!IS_IGD(dev)) + return; + if (enable) + I915_WRITE(CG_2D_DIS, + I915_READ(CG_2D_DIS) | DPCUNIT_CLOCK_GATE_DISABLE); + else + I915_WRITE(CG_2D_DIS, + I915_READ(CG_2D_DIS) & (~DPCUNIT_CLOCK_GATE_DISABLE)); +} + /* * Intel GPIO access functions */ @@ -153,8 +168,10 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, goto out_free; /* JJJ: raise SCL and SDA? */ + intel_i2c_quirk_set(dev, true); set_data(chan, 1); set_clock(chan, 1); + intel_i2c_quirk_set(dev, false); udelay(20); return chan; diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6619f26..439a865 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -384,7 +384,51 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = { .destroy = intel_lvds_enc_destroy, }; +static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id) +{ + DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident); + return 1; +} +/* These systems claim to have LVDS, but really don't */ +static const struct dmi_system_id __initdata intel_no_lvds[] = { + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Apple Mac Mini (Core series)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Apple Mac Mini (Core 2 series)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "MSI IM-945GSE-A", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MSI"), + DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Dell Studio Hybrid", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"), + }, + }, + + /* FIXME: add a check for the Aopen Mini PC */ + + { } /* terminating entry */ +}; /** * intel_lvds_init - setup LVDS connectors on this device @@ -404,15 +448,9 @@ void intel_lvds_init(struct drm_device *dev) u32 lvds; int pipe; - /* Blacklist machines that we know falsely report LVDS. */ - /* FIXME: add a check for the Aopen Mini PC */ - - /* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */ - if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") || - dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) { - DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n"); + /* Skip init on machines we know falsely report LVDS */ + if (dmi_check_system(intel_no_lvds)) return; - } intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); if (!intel_output) { diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index 07d7ec9..e0910fe 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -27,6 +27,7 @@ #include <linux/fb.h> #include "drmP.h" #include "intel_drv.h" +#include "i915_drv.h" /** * intel_ddc_probe @@ -52,7 +53,10 @@ bool intel_ddc_probe(struct intel_output *intel_output) } }; + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2); + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); + if (ret == 2) return true; @@ -70,8 +74,10 @@ int intel_ddc_get_modes(struct intel_output *intel_output) struct edid *edid; int ret = 0; + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); edid = drm_get_edid(&intel_output->base, &intel_output->ddc_bus->adapter); + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); if (edid) { drm_mode_connector_update_edid_property(&intel_output->base, edid); diff --git a/drivers/gpu/drm/r128/r128_cce.c b/drivers/gpu/drm/r128/r128_cce.c index 32de4ce..077c045 100644 --- a/drivers/gpu/drm/r128/r128_cce.c +++ b/drivers/gpu/drm/r128/r128_cce.c @@ -511,9 +511,9 @@ static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init) #if __OS_HAS_AGP if (!dev_priv->is_pci) { - drm_core_ioremap(dev_priv->cce_ring, dev); - drm_core_ioremap(dev_priv->ring_rptr, dev); - drm_core_ioremap(dev->agp_buffer_map, dev); + drm_core_ioremap_wc(dev_priv->cce_ring, dev); + drm_core_ioremap_wc(dev_priv->ring_rptr, dev); + drm_core_ioremap_wc(dev->agp_buffer_map, dev); if (!dev_priv->cce_ring->handle || !dev_priv->ring_rptr->handle || !dev->agp_buffer_map->handle) { diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index ed4d27e..8071d96 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -99,9 +99,10 @@ * 1.27- Add support for IGP GART * 1.28- Add support for VBL on CRTC2 * 1.29- R500 3D cmd buffer support + * 1.30- Add support for occlusion queries */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 29 +#define DRIVER_MINOR 30 #define DRIVER_PATCHLEVEL 0 /* diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 7359d9d..acbce57 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -151,7 +151,7 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input, if (fnmode) { int do_translate; - trans = apple_find_translation((hid->product < 0x220 || + trans = apple_find_translation((hid->product < 0x21d || hid->product >= 0x300) ? powerbook_fn_keys : apple_fn_keys, usage->code); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 5746a59..8551693 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1293,6 +1293,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) }, @@ -1824,6 +1825,9 @@ int hid_check_keys_pressed(struct hid_device *hid) struct hid_input *hidinput; int i; + if (!(hid->claimed & HID_CLAIMED_INPUT)) + return 0; + list_for_each_entry(hidinput, &hid->inputs, list) { for (i = 0; i < BITS_TO_LONGS(KEY_MAX); i++) if (hidinput->input->key[i]) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index bdeda4c..4d5ee2b 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -113,6 +113,11 @@ #define USB_VENDOR_ID_BERKSHIRE 0x0c98 #define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140 +#define USB_VENDOR_ID_CH 0x068e +#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2 +#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4 +#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff + #define USB_VENDOR_ID_CHERRY 0x046a #define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023 @@ -292,6 +297,7 @@ #define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286 #define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294 #define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295 +#define USB_DEVICE_ID_LOGITECH_G25_WHEEL 0xc299 #define USB_DEVICE_ID_LOGITECH_ELITE_KBD 0xc30a #define USB_DEVICE_ID_S510_RECEIVER 0xc50c #define USB_DEVICE_ID_S510_RECEIVER_2 0xc517 diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c index 7b80cb6..7afbaa0 100644 --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -297,6 +297,8 @@ static const struct hid_device_id lg_devices[] = { .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2), .driver_data = LG_FF }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL), + .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2), .driver_data = LG_FF2 }, { } diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index e263d47..00ccf4b 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -285,8 +285,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) { int len; - if (!hid->name) - return 0; + if (!hid->name) { + ret = 0; + break; + } len = strlen(hid->name) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); @@ -297,8 +299,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) { int len; - if (!hid->phys) - return 0; + if (!hid->phys) { + ret = 0; + break; + } len = strlen(hid->phys) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 4306cb1..ac8049b 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -662,8 +662,8 @@ void usbhid_close(struct hid_device *hid) spin_lock_irq(&usbhid->lock); if (!--hid->open) { spin_unlock_irq(&usbhid->lock); + hid_cancel_delayed_stuff(usbhid); usb_kill_urb(usbhid->urbin); - flush_scheduled_work(); usbhid->intf->needs_remote_wakeup = 0; } else { spin_unlock_irq(&usbhid->lock); @@ -898,7 +898,7 @@ static int usbhid_parse(struct hid_device *hid) goto err; } - hid->quirks = quirks; + hid->quirks |= quirks; return 0; err: diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 4391717..d8f7423 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -50,6 +50,9 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET }, diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 0897ede..bff0103 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -348,6 +348,7 @@ static int validate_hwmon_pack(struct atk_data *data, union acpi_object *obj) return 0; } +#ifdef DEBUG static char const *atk_sensor_type(union acpi_object *flags) { u64 type = flags->integer.value & ATK_TYPE_MASK; @@ -370,6 +371,7 @@ static char const *atk_sensor_type(union acpi_object *flags) return what; } +#endif static void atk_print_sensor(struct atk_data *data, union acpi_object *obj) { diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index dbfb30c..0bdab95 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -1462,7 +1462,8 @@ static struct w83781d_data *w83781d_update_device(struct device *dev) data->pwm[i] = w83781d_read_value(data, W83781D_REG_PWM[i]); - if ((data->type != w83782d || !client->driver) + /* Only W83782D on SMBus has PWM3 and PWM4 */ + if ((data->type != w83782d || !client) && i == 1) break; } diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index d420cc5..e25e139 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -104,7 +104,7 @@ static int sclhi(struct i2c_algo_bit_data *adap) * chips may hold it low ("clock stretching") while they * are processing data internally. */ - if (time_after_eq(jiffies, start + adap->timeout)) + if (time_after(jiffies, start + adap->timeout)) return -ETIMEDOUT; cond_resched(); } diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 6318f7d..78d42aa 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -287,10 +287,21 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */ DEB2("NOT ACK received after data byte\n"); + pca_stop(adap); goto out; case 0x38: /* Arbitration lost during SLA+W, SLA+R or data bytes */ DEB2("Arbitration lost\n"); + /* + * The PCA9564 data sheet (2006-09-01) says "A + * START condition will be transmitted when the + * bus becomes free (STOP or SCL and SDA high)" + * when the STA bit is set (p. 11). + * + * In case this won't work, try pca_reset() + * instead. + */ + pca_start(adap); goto out; case 0x58: /* Data byte has been received; NOT ACK has been returned */ diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index a48c8ae..f1c6ca7 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -467,7 +467,7 @@ config I2C_PXA_SLAVE config I2C_S3C2410 tristate "S3C2410 I2C Driver" - depends on ARCH_S3C2410 + depends on ARCH_S3C2410 || ARCH_S3C64XX help Say Y here to include support for I2C controller in the Samsung S3C2410 based System-on-Chip devices. diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 981e080..d108450 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -284,7 +284,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 39066de..d627fce 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -306,7 +306,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 220f4a1..f7d6fe9 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -126,7 +126,7 @@ static int amd756_transaction(struct i2c_adapter *adap) } while ((temp & (GS_HST_STS | GS_SMB_STS)) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp); goto abort; } @@ -143,7 +143,7 @@ static int amd756_transaction(struct i2c_adapter *adap) } while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "Completion timeout!\n"); goto abort; } diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 3fcf78e..b5db8b8 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -531,16 +531,16 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) rbdf = cpm->rbase; for (i = 0; i < CPM_MAXBD; i++) { - cpm->rxbuf[i] = dma_alloc_coherent( - NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL); + cpm->rxbuf[i] = dma_alloc_coherent(&cpm->ofdev->dev, + CPM_MAX_READ + 1, + &cpm->rxdma[i], GFP_KERNEL); if (!cpm->rxbuf[i]) { ret = -ENOMEM; goto out_muram; } out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1)); - cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent( - NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL); + cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL); if (!cpm->txbuf[i]) { ret = -ENOMEM; goto out_muram; @@ -585,10 +585,10 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) out_muram: for (i = 0; i < CPM_MAXBD; i++) { if (cpm->rxbuf[i]) - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->rxbuf[i], cpm->rxdma[i]); if (cpm->txbuf[i]) - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->txbuf[i], cpm->txdma[i]); } cpm_muram_free(cpm->dp_addr); @@ -619,9 +619,9 @@ static void cpm_i2c_shutdown(struct cpm_i2c *cpm) /* Free all memory */ for (i = 0; i < CPM_MAXBD; i++) { - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->rxbuf[i], cpm->rxdma[i]); - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->txbuf[i], cpm->txdma[i]); } diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 1041184..9d2c5ad 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -237,7 +237,7 @@ static int i801_transaction(int xact) status = inb_p(SMBHSTSTS); } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); - result = i801_check_post(status, timeout >= MAX_TIMEOUT); + result = i801_check_post(status, timeout > MAX_TIMEOUT); if (result < 0) return result; @@ -257,9 +257,9 @@ static void i801_wait_hwpec(void) } while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_TIMEOUT)); - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) dev_dbg(&I801_dev->dev, "PEC Timeout!\n"); - } + outb_p(status, SMBHSTSTS); } @@ -344,7 +344,7 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_TIMEOUT)); - result = i801_check_post(status, timeout >= MAX_TIMEOUT); + result = i801_check_post(status, timeout > MAX_TIMEOUT); if (result < 0) return result; diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index b9c01aa..9f6b8e0 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -112,7 +112,7 @@ static int sch_transaction(void) } while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_err(&sch_adapter.dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 4af5c09..dd778d7 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -164,7 +164,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) return 0; } -#ifdef CONFIG_PPC_52xx +#ifdef CONFIG_PPC_MPC52xx static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, @@ -188,7 +188,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler) { - const struct mpc52xx_i2c_divider *div = NULL; + const struct mpc_i2c_divider *div = NULL; unsigned int pvr = mfspr(SPRN_PVR); u32 divider; int i; @@ -203,7 +203,7 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler) * We want to choose an FDR/DFSR that generates an I2C bus speed that * is equal to or lower than the requested speed. */ - for (i = 0; i < ARRAY_SIZE(mpc52xx_i2c_dividers); i++) { + for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) { div = &mpc_i2c_dividers_52xx[i]; /* Old MPC5200 rev A CPUs do not support the high bits */ if (div->fdr & 0xc0 && pvr == 0x80822011) @@ -219,20 +219,23 @@ static void mpc_i2c_setclock_52xx(struct device_node *node, struct mpc_i2c *i2c, u32 clock, u32 prescaler) { - int fdr = mpc52xx_i2c_get_fdr(node, clock, prescaler); + int ret, fdr; + + ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler); + fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ - if (fdr < 0) - fdr = 0x3f; /* backward compatibility */ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); - dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr); + + if (ret >= 0) + dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr); } -#else /* !CONFIG_PPC_52xx */ +#else /* !CONFIG_PPC_MPC52xx */ static void mpc_i2c_setclock_52xx(struct device_node *node, struct mpc_i2c *i2c, u32 clock, u32 prescaler) { } -#endif /* CONFIG_PPC_52xx*/ +#endif /* CONFIG_PPC_MPC52xx*/ #ifdef CONFIG_FSL_SOC static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { @@ -321,14 +324,17 @@ static void mpc_i2c_setclock_8xxx(struct device_node *node, struct mpc_i2c *i2c, u32 clock, u32 prescaler) { - int fdr = mpc_i2c_get_fdr_8xxx(node, clock, prescaler); + int ret, fdr; + + ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler); + fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ - if (fdr < 0) - fdr = 0x1031; /* backward compatibility */ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR); - dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", - clock, fdr >> 8, fdr & 0xff); + + if (ret >= 0) + dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", + clock, fdr >> 8, fdr & 0xff); } #else /* !CONFIG_FSL_SOC */ diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 2ff4683..ec11d1c 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -173,7 +173,7 @@ static int nforce2_check_status(struct i2c_adapter *adap) temp = inb_p(NVIDIA_SMB_STS); } while ((!temp) && (timeout++ < MAX_TIMEOUT)); - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); if (smbus->can_abort) nforce2_abort(adap); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index c1405c8..acc7143 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -265,10 +265,10 @@ static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c) show_state(i2c); } - if (timeout <= 0) + if (timeout < 0) show_state(i2c); - return timeout <= 0 ? I2C_RETRY : 0; + return timeout < 0 ? I2C_RETRY : 0; } static int i2c_pxa_wait_master(struct pxa_i2c *i2c) @@ -612,7 +612,7 @@ static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) show_state(i2c); } - if (timeout <= 0) { + if (timeout < 0) { show_state(i2c); dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index f320ab2..139f0c7 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -256,7 +256,7 @@ static int sis5595_transaction(struct i2c_adapter *adap) } while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 50c3610..70ca41e 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -173,7 +173,7 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size) } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 7e1594b..8295885 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -132,7 +132,7 @@ static int sis96x_transaction(int size) } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp); result = -ETIMEDOUT; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 3d4e099..925eb9e 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -312,7 +312,6 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->rq; int err, sense_key, do_end_request = 0; - u8 quiet = rq->cmd_flags & REQ_QUIET; /* get the IDE error register */ err = ide_read_error(drive); @@ -347,7 +346,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) } else { cdrom_saw_media_change(drive); - if (blk_fs_request(rq) && !quiet) + if (blk_fs_request(rq) && !blk_rq_quiet(rq)) printk(KERN_ERR PFX "%s: tray open\n", drive->name); } @@ -382,7 +381,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) * No point in retrying after an illegal request or data * protect error. */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "command error", stat); do_end_request = 1; break; @@ -391,14 +390,14 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) * No point in re-trying a zillion times on a bad sector. * If we got here the error is not correctable. */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "media error " "(bad sector)", stat); do_end_request = 1; break; case BLANK_CHECK: /* disk appears blank? */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "media error (blank)", stat); do_end_request = 1; diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index 8d71086..62f9cf2 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -410,6 +410,7 @@ int cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count) ptr = wq->sq_rptr + count; sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2); while (ptr != wq->sq_wptr) { + sqp->signaled = 0; insert_sq_cqe(wq, cq, sqp); ptr++; sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2); diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c index 8dc2bb7..b368406 100644 --- a/drivers/infiniband/hw/ipath/ipath_fs.c +++ b/drivers/infiniband/hw/ipath/ipath_fs.c @@ -347,7 +347,7 @@ static int ipathfs_fill_super(struct super_block *sb, void *data, spin_unlock_irqrestore(&ipath_devs_lock, flags); ret = create_device_files(sb, dd); if (ret) { - deactivate_super(sb); + deactivate_locked_super(sb); goto bail; } spin_lock_irqsave(&ipath_devs_lock, flags); diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h index 9974e88..8a7dd67 100644 --- a/drivers/infiniband/hw/mlx4/mlx4_ib.h +++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h @@ -86,6 +86,7 @@ struct mlx4_ib_mr { struct mlx4_ib_fast_reg_page_list { struct ib_fast_reg_page_list ibfrpl; + __be64 *mapped_page_list; dma_addr_t map; }; diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index 8e4d26d..8f3666b 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -231,7 +231,11 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device if (!mfrpl) return ERR_PTR(-ENOMEM); - mfrpl->ibfrpl.page_list = dma_alloc_coherent(&dev->dev->pdev->dev, + mfrpl->ibfrpl.page_list = kmalloc(size, GFP_KERNEL); + if (!mfrpl->ibfrpl.page_list) + goto err_free; + + mfrpl->mapped_page_list = dma_alloc_coherent(&dev->dev->pdev->dev, size, &mfrpl->map, GFP_KERNEL); if (!mfrpl->ibfrpl.page_list) @@ -242,6 +246,7 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device return &mfrpl->ibfrpl; err_free: + kfree(mfrpl->ibfrpl.page_list); kfree(mfrpl); return ERR_PTR(-ENOMEM); } @@ -252,8 +257,9 @@ void mlx4_ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list) struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(page_list); int size = page_list->max_page_list_len * sizeof (u64); - dma_free_coherent(&dev->dev->pdev->dev, size, page_list->page_list, + dma_free_coherent(&dev->dev->pdev->dev, size, mfrpl->mapped_page_list, mfrpl->map); + kfree(mfrpl->ibfrpl.page_list); kfree(mfrpl); } diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index f385a24..20724ae 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1365,7 +1365,7 @@ static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr) int i; for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i) - wr->wr.fast_reg.page_list->page_list[i] = + mfrpl->mapped_page_list[i] = cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] | MLX4_MTT_FLAG_PRESENT); diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index 13d7674..75223f5 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -599,6 +599,7 @@ static struct scsi_host_template iscsi_iser_sht = { .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler= iscsi_eh_device_reset, .eh_target_reset_handler= iscsi_eh_target_reset, + .target_alloc = iscsi_target_alloc, .use_clustering = DISABLE_CLUSTERING, .proc_name = "iscsi_iser", .this_id = -1, diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index bc4e40f..2d1415e 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -226,7 +226,7 @@ static int get_compatible_type(struct ff_device *ff, int effect_type) */ static void ml_combine_effects(struct ff_effect *effect, struct ml_effect_state *state, - int gain) + unsigned int gain) { struct ff_effect *new = state->effect; unsigned int strong, weak, i; diff --git a/drivers/input/input.c b/drivers/input/input.c index 935a1835..e54e002 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -29,6 +29,23 @@ MODULE_LICENSE("GPL"); #define INPUT_DEVICES 256 +/* + * EV_ABS events which should not be cached are listed here. + */ +static unsigned int input_abs_bypass_init_data[] __initdata = { + ABS_MT_TOUCH_MAJOR, + ABS_MT_TOUCH_MINOR, + ABS_MT_WIDTH_MAJOR, + ABS_MT_WIDTH_MINOR, + ABS_MT_ORIENTATION, + ABS_MT_POSITION_X, + ABS_MT_POSITION_Y, + ABS_MT_TOOL_TYPE, + ABS_MT_BLOB_ID, + 0 +}; +static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; + static LIST_HEAD(input_dev_list); static LIST_HEAD(input_handler_list); @@ -161,6 +178,10 @@ static void input_handle_event(struct input_dev *dev, disposition = INPUT_PASS_TO_HANDLERS; } break; + case SYN_MT_REPORT: + dev->sync = 0; + disposition = INPUT_PASS_TO_HANDLERS; + break; } break; @@ -192,6 +213,11 @@ static void input_handle_event(struct input_dev *dev, case EV_ABS: if (is_event_supported(code, dev->absbit, ABS_MAX)) { + if (test_bit(code, input_abs_bypass)) { + disposition = INPUT_PASS_TO_HANDLERS; + break; + } + value = input_defuzz_abs_event(value, dev->abs[code], dev->absfuzz[code]); @@ -1634,10 +1660,20 @@ static const struct file_operations input_fops = { .open = input_open_file, }; +static void __init input_init_abs_bypass(void) +{ + const unsigned int *p; + + for (p = input_abs_bypass_init_data; *p; p++) + input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p); +} + static int __init input_init(void) { int err; + input_init_abs_bypass(); + err = class_register(&input_class); if (err) { printk(KERN_ERR "input: unable to register input_dev class\n"); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 4224f01..012a5e7 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -843,7 +843,13 @@ static const struct input_device_id joydev_blacklist[] = { INPUT_DEVICE_ID_MATCH_KEYBIT, .evbit = { BIT_MASK(EV_KEY) }, .keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) }, - }, /* Avoid itouchpads, touchscreens and tablets */ + }, /* Avoid itouchpads and touchscreens */ + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | + INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) }, + }, /* Avoid tablets, digitisers and similar devices */ { } /* Terminating entry */ }; diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 444dec0..df3f8aa 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -895,6 +895,13 @@ static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = { }; /* + * Amilo Xi 3650 key release for light touch bar not working + */ +static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { + 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U +}; + +/* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ @@ -1560,6 +1567,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkbd_amilo_pa1510_forced_release_keys, }, + { + .ident = "Fujitsu Amilo Xi 3650", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_xi3650_forced_release_keys, + }, { } }; diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 058fa8b..87ec7b1 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -100,8 +100,20 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) /* disable keyboard interrupt and schedule for handling */ if (cpu_is_omap24xx()) { int i; - for (i = 0; i < omap_kp->rows; i++) - disable_irq(gpio_to_irq(row_gpios[i])); + + for (i = 0; i < omap_kp->rows; i++) { + int gpio_irq = gpio_to_irq(row_gpios[i]); + /* + * The interrupt which we're currently handling should + * be disabled _nosync() to avoid deadlocks waiting + * for this handler to complete. All others should + * be disabled the regular way for SMP safety. + */ + if (gpio_irq == irq) + disable_irq_nosync(gpio_irq); + else + disable_irq(gpio_irq); + } } else /* disable keyboard interrupt and schedule for handling */ omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index cbedf95..daecc75 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -37,6 +37,7 @@ #define ALPS_FW_BK_2 0x40 static const struct alps_model_info alps_model_data[] = { + { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ { { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */ { { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, { { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 454b961..e0140fd 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -255,15 +255,22 @@ MODULE_PARM_DESC(debug, "Activate debugging output"); */ static int atp_geyser_init(struct usb_device *udev) { - char data[8]; + char *data; int size; int i; + int ret; + + data = kmalloc(8, GFP_KERNEL); + if (!data) { + err("Out of memory"); + return -ENOMEM; + } size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), ATP_GEYSER_MODE_READ_REQUEST_ID, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, ATP_GEYSER_MODE_REQUEST_VALUE, - ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { dprintk("atp_geyser_init: read error\n"); @@ -271,7 +278,8 @@ static int atp_geyser_init(struct usb_device *udev) dprintk("appletouch[%d]: %d\n", i, data[i]); err("Failed to read mode from device."); - return -EIO; + ret = -EIO; + goto out_free; } /* Apply the mode switch */ @@ -281,7 +289,7 @@ static int atp_geyser_init(struct usb_device *udev) ATP_GEYSER_MODE_WRITE_REQUEST_ID, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, ATP_GEYSER_MODE_REQUEST_VALUE, - ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { dprintk("atp_geyser_init: write error\n"); @@ -289,9 +297,13 @@ static int atp_geyser_init(struct usb_device *udev) dprintk("appletouch[%d]: %d\n", i, data[i]); err("Failed to request geyser raw mode"); - return -EIO; + ret = -EIO; + goto out_free; } - return 0; + ret = 0; +out_free: + kfree(data); + return ret; } /* diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 2998a6a..2d8fc0b 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -51,6 +51,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232 +/* Macbook5,1 (unibody), aka wellspring3 */ +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -72,6 +76,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), + /* Macbook5,1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), /* Terminating entry */ {} }; @@ -96,14 +104,23 @@ struct bt_data { u8 rel_y; /* relative y coordinate */ }; -/* trackpad header structure */ -struct tp_header { - u8 unknown1[16]; /* constants, timers, etc */ - u8 fingers; /* number of fingers on trackpad */ - u8 unknown2[9]; /* constants, timers, etc */ +/* trackpad header types */ +enum tp_type { + TYPE1, /* plain trackpad */ + TYPE2 /* button integrated in trackpad */ }; -/* trackpad finger structure */ +/* trackpad finger data offsets, le16-aligned */ +#define FINGER_TYPE1 (13 * sizeof(__le16)) +#define FINGER_TYPE2 (15 * sizeof(__le16)) + +/* trackpad button data offsets */ +#define BUTTON_TYPE2 15 + +/* list of device capability bits */ +#define HAS_INTEGRATED_BUTTON 1 + +/* trackpad finger structure, le16-aligned */ struct tp_finger { __le16 origin; /* zero when switching track finger */ __le16 abs_x; /* absolute x coodinate */ @@ -117,13 +134,11 @@ struct tp_finger { __le16 force_minor; /* trackpad force, minor axis? */ __le16 unused[3]; /* zeros */ __le16 multi; /* one finger: varies, more fingers: constant */ -}; +} __attribute__((packed,aligned(2))); -/* trackpad data structure, empirically at least ten fingers */ -struct tp_data { - struct tp_header header; - struct tp_finger finger[16]; -}; +/* trackpad finger data size, empirically at least ten fingers */ +#define SIZEOF_FINGER sizeof(struct tp_finger) +#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER) /* device-specific parameters */ struct bcm5974_param { @@ -136,9 +151,12 @@ struct bcm5974_param { /* device-specific configuration */ struct bcm5974_config { int ansi, iso, jis; /* the product id of this device */ + int caps; /* device capability bitmask */ int bt_ep; /* the endpoint of the button interface */ int bt_datalen; /* data length of the button interface */ int tp_ep; /* the endpoint of the trackpad interface */ + enum tp_type tp_type; /* type of trackpad interface */ + int tp_offset; /* offset to trackpad finger data */ int tp_datalen; /* data length of the trackpad interface */ struct bcm5974_param p; /* finger pressure limits */ struct bcm5974_param w; /* finger width limits */ @@ -158,7 +176,7 @@ struct bcm5974 { struct urb *bt_urb; /* button usb request block */ struct bt_data *bt_data; /* button transferred data */ struct urb *tp_urb; /* trackpad usb request block */ - struct tp_data *tp_data; /* trackpad transferred data */ + u8 *tp_data; /* trackpad transferred data */ int fingers; /* number of fingers on trackpad */ }; @@ -183,8 +201,9 @@ static const struct bcm5974_config bcm5974_config_table[] = { USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, + 0, 0x84, sizeof(struct bt_data), - 0x81, sizeof(struct tp_data), + 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, { DIM_X, DIM_X / SN_COORD, -4824, 5342 }, @@ -194,13 +213,26 @@ static const struct bcm5974_config bcm5974_config_table[] = { USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, + 0, 0x84, sizeof(struct bt_data), - 0x81, sizeof(struct tp_data), + 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, { DIM_X, DIM_X / SN_COORD, -4824, 4824 }, { DIM_Y, DIM_Y / SN_COORD, -172, 4290 } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING3_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING3_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4460, 5166 }, + { DIM_Y, DIM_Y / SN_COORD, -75, 6700 } + }, {} }; @@ -257,6 +289,7 @@ static void setup_events_to_report(struct input_dev *input_dev, __set_bit(BTN_TOOL_FINGER, input_dev->keybit); __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); __set_bit(BTN_LEFT, input_dev->keybit); } @@ -266,6 +299,11 @@ static int report_bt_state(struct bcm5974 *dev, int size) if (size != sizeof(struct bt_data)) return -EIO; + dprintk(7, + "bcm5974: button data: %x %x %x %x\n", + dev->bt_data->unknown1, dev->bt_data->button, + dev->bt_data->rel_x, dev->bt_data->rel_y); + input_report_key(dev->input, BTN_LEFT, dev->bt_data->button); input_sync(dev->input); @@ -276,29 +314,37 @@ static int report_bt_state(struct bcm5974 *dev, int size) static int report_tp_state(struct bcm5974 *dev, int size) { const struct bcm5974_config *c = &dev->cfg; - const struct tp_finger *f = dev->tp_data->finger; + const struct tp_finger *f; struct input_dev *input = dev->input; - const int fingers = (size - 26) / 28; - int raw_p, raw_w, raw_x, raw_y; - int ptest = 0, origin = 0, nmin = 0, nmax = 0; + int raw_p, raw_w, raw_x, raw_y, raw_n; + int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0; int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; - if (size < 26 || (size - 26) % 28 != 0) + if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0) return -EIO; + /* finger data, le16-aligned */ + f = (const struct tp_finger *)(dev->tp_data + c->tp_offset); + raw_n = (size - c->tp_offset) / SIZEOF_FINGER; + /* always track the first finger; when detached, start over */ - if (fingers) { + if (raw_n) { raw_p = raw2int(f->force_major); raw_w = raw2int(f->size_major); raw_x = raw2int(f->abs_x); raw_y = raw2int(f->abs_y); dprintk(9, - "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n", - raw_p, raw_w, raw_x, raw_y); + "bcm5974: " + "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n", + raw_p, raw_w, raw_x, raw_y, raw_n); ptest = int2bound(&c->p, raw_p); origin = raw2int(f->origin); + + /* set the integrated button if applicable */ + if (c->tp_type == TYPE2) + ibt = raw2int(dev->tp_data[BUTTON_TYPE2]); } /* while tracking finger still valid, count all fingers */ @@ -307,12 +353,13 @@ static int report_tp_state(struct bcm5974 *dev, int size) abs_w = int2bound(&c->w, raw_w); abs_x = int2bound(&c->x, raw_x - c->x.devmin); abs_y = int2bound(&c->y, c->y.devmax - raw_y); - for (; f != dev->tp_data->finger + fingers; f++) { + while (raw_n--) { ptest = int2bound(&c->p, raw2int(f->force_major)); if (ptest > PRESSURE_LOW) nmax++; if (ptest > PRESSURE_HIGH) nmin++; + f++; } } @@ -324,7 +371,8 @@ static int report_tp_state(struct bcm5974 *dev, int size) input_report_key(input, BTN_TOUCH, dev->fingers > 0); input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1); input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2); - input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2); + input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3); + input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3); input_report_abs(input, ABS_PRESSURE, abs_p); input_report_abs(input, ABS_TOOL_WIDTH, abs_w); @@ -335,11 +383,15 @@ static int report_tp_state(struct bcm5974 *dev, int size) dprintk(8, "bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d " - "nmin: %d nmax: %d n: %d\n", - abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers); + "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w, + abs_x, abs_y, nmin, nmax, dev->fingers, ibt); } + /* type 2 reports button events via ibt only */ + if (c->tp_type == TYPE2) + input_report_key(input, BTN_LEFT, ibt); + input_sync(input); return 0; @@ -649,6 +701,8 @@ static int bcm5974_probe(struct usb_interface *iface, input_dev->name = "bcm5974"; input_dev->phys = dev->phys; usb_to_input_id(dev->udev, &input_dev->id); + /* report driver capabilities via the version field */ + input_dev->id.version = cfg->caps; input_dev->dev.parent = &iface->dev; input_set_drvdata(input_dev, dev); diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 6ab0eb1a..4bc78892 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1,7 +1,7 @@ /* - * Elantech Touchpad driver (v5) + * Elantech Touchpad driver (v6) * - * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -178,6 +178,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) struct elantech_data *etd = psmouse->private; unsigned char *packet = psmouse->packet; int fingers; + static int old_fingers; if (etd->fw_version_maj == 0x01) { /* byte 0: D U p1 p2 1 p3 R L @@ -190,6 +191,14 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) fingers = (packet[0] & 0xc0) >> 6; } + if (etd->jumpy_cursor) { + /* Discard packets that are likely to have bogus coordinates */ + if (fingers > old_fingers) { + elantech_debug("elantech.c: discarding packet\n"); + goto discard_packet_v1; + } + } + input_report_key(dev, BTN_TOUCH, fingers != 0); /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0 @@ -216,6 +225,9 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) } input_sync(dev); + + discard_packet_v1: + old_fingers = fingers; } /* @@ -363,9 +375,14 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) rc = -1; break; } + } + + if (rc == 0) { /* - * Read back reg 0x10. The touchpad is probably initalising - * and not ready until we read back the value we just wrote. + * Read back reg 0x10. For hardware version 1 we must make + * sure the absolute mode bit is set. For hardware version 2 + * the touchpad is probably initalising and not ready until + * we read back the value we just wrote. */ do { rc = elantech_read_reg(psmouse, 0x10, &val); @@ -373,12 +390,18 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) break; tries--; elantech_debug("elantech.c: retrying read (%d).\n", - tries); + tries); msleep(ETP_READ_BACK_DELAY); } while (tries > 0); - if (rc) + + if (rc) { pr_err("elantech.c: failed to read back register 0x10.\n"); - break; + } else if (etd->hw_version == 1 && + !(val & ETP_R10_ABSOLUTE_MODE)) { + pr_err("elantech.c: touchpad refuses " + "to switch to absolute mode.\n"); + rc = -1; + } } if (rc) @@ -662,6 +685,17 @@ int elantech_init(struct psmouse *psmouse) param[0], param[1], param[2]); etd->capabilities = param[0]; + /* + * This firmware seems to suffer from misreporting coordinates when + * a touch action starts causing the mouse cursor or scrolled page + * to jump. Enable a workaround. + */ + if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) { + pr_info("elantech.c: firmware version 2.34 detected, " + "enabling jumpy cursor workaround\n"); + etd->jumpy_cursor = 1; + } + if (elantech_set_absolute_mode(psmouse)) { pr_err("elantech.c: failed to put touchpad into absolute mode.\n"); goto init_fail; diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index bee282b..ed848cc 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -1,7 +1,7 @@ /* - * Elantech Touchpad driver (v5) + * Elantech Touchpad driver (v6) * - * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -104,6 +104,7 @@ struct elantech_data { unsigned char fw_version_min; unsigned char hw_version; unsigned char paritycheck; + unsigned char jumpy_cursor; unsigned char parity[256]; }; diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index df81b0a..15ac320 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -61,6 +61,12 @@ static const struct dmi_system_id lifebook_dmi_table[] = { }, }, { + .ident = "Lifebook B-2130", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"), + }, + }, + { .ident = "Lifebook B213x/B2150", .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"), diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c index 57953c0..f412c69 100644 --- a/drivers/input/serio/sa1111ps2.c +++ b/drivers/input/serio/sa1111ps2.c @@ -77,7 +77,7 @@ static irqreturn_t ps2_txint(int irq, void *dev_id) spin_lock(&ps2if->lock); status = sa1111_readl(ps2if->base + SA1111_PS2STAT); if (ps2if->head == ps2if->tail) { - disable_irq(irq); + disable_irq_nosync(irq); /* done */ } else if (status & PS2STAT_TXE) { sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA); diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index 677680e..9710bfd 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -11,7 +11,7 @@ * Copyright (c) 2000 Daniel Egger <egger@suse.de> * Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com> * Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be> - * Copyright (c) 2002-2008 Ping Cheng <pingc@wacom.com> + * Copyright (c) 2002-2009 Ping Cheng <pingc@wacom.com> * * ChangeLog: * v0.1 (vp) - Initial release @@ -67,6 +67,7 @@ * v1.47 (pc) - Added support for Bamboo * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A) + * v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28 */ /* @@ -87,7 +88,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.49" +#define DRIVER_VERSION "v1.50" #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>" #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 484496d..b8624f2 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -289,6 +289,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi 5000); /* 5 secs */ } while (result < 0 && limit++ < 5); + /* No need to parse the Descriptor. It isn't an error though */ if (result < 0) goto out; @@ -368,9 +369,8 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi } } - result = 0; - out: + result = 0; kfree(report); return result; } @@ -425,6 +425,15 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i endpoint = &intf->cur_altsetting->endpoint[0].desc; + /* Initialize touch_x_max and touch_y_max in case it is not defined */ + if (wacom_wac->features->type == TABLETPC) { + features->touch_x_max = 1023; + features->touch_y_max = 1023; + } else { + features->touch_x_max = 0; + features->touch_y_max = 0; + } + /* TabletPC need to retrieve the physical and logical maximum from report descriptor */ if (wacom_wac->features->type == TABLETPC) { if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 4ab0702..948e167 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -200,8 +200,9 @@ static int tsc2007_read_values(struct tsc2007 *tsc) static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle) { struct tsc2007 *ts = container_of(handle, struct tsc2007, timer); + unsigned long flags; - spin_lock_irq(&ts->lock); + spin_lock_irqsave(&ts->lock, flags); if (unlikely(!ts->get_pendown_state() && ts->pendown)) { struct input_dev *input = ts->input; @@ -222,7 +223,7 @@ static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle) tsc2007_send_event(ts); } - spin_unlock_irq(&ts->lock); + spin_unlock_irqrestore(&ts->lock, flags); return HRTIMER_NORESTART; } @@ -235,7 +236,7 @@ static irqreturn_t tsc2007_irq(int irq, void *handle) spin_lock_irqsave(&ts->lock, flags); if (likely(ts->get_pendown_state())) { - disable_irq(ts->irq); + disable_irq_nosync(ts->irq); hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), HRTIMER_MODE_REL); } diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index e868264..f100c7f 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -256,7 +256,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid) struct ucb1400_ts *ucb = devid; if (irqnr == ucb->irq) { - disable_irq(ucb->irq); + disable_irq_nosync(ucb->irq); ucb->irq_pending = 1; wake_up(&ucb->ts_wait); return IRQ_HANDLED; diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c index b129409..bff72d8 100644 --- a/drivers/isdn/capi/capifs.c +++ b/drivers/isdn/capi/capifs.c @@ -75,15 +75,17 @@ static int capifs_remount(struct super_block *s, int *flags, char *data) } } - kfree(s->s_options); - s->s_options = new_opt; + mutex_lock(&s->s_root->d_inode->i_mutex); + replace_mount_options(s, new_opt); config.setuid = setuid; config.setgid = setgid; config.uid = uid; config.gid = gid; config.mode = mode; + mutex_unlock(&s->s_root->d_inode->i_mutex); + return 0; } @@ -154,13 +156,16 @@ void capifs_new_ncci(unsigned int number, dev_t device) if (!inode) return; inode->i_ino = number+2; + + dentry = get_node(number); + + /* config contents is protected by root's i_mutex */ inode->i_uid = config.setuid ? config.uid : current_fsuid(); inode->i_gid = config.setgid ? config.gid : current_fsgid(); inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; init_special_inode(inode, S_IFCHR|config.mode, device); //inode->i_op = &capifs_file_inode_operations; - dentry = get_node(number); if (!IS_ERR(dentry) && !dentry->d_inode) d_instantiate(dentry, inode); mutex_unlock(&capifs_root->d_inode->i_mutex); diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 1fb91ed..47c68bc 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -986,6 +986,9 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) oldindex = index; oldpage = page; + bitmap->filemap[bitmap->file_pages++] = page; + bitmap->last_page_size = count; + if (outofdate) { /* * if bitmap is out of date, dirty the @@ -998,15 +1001,9 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) write_page(bitmap, page, 1); ret = -EIO; - if (bitmap->flags & BITMAP_WRITE_ERROR) { - /* release, page not in filemap yet */ - put_page(page); + if (bitmap->flags & BITMAP_WRITE_ERROR) goto err; - } } - - bitmap->filemap[bitmap->file_pages++] = page; - bitmap->last_page_size = count; } paddr = kmap_atomic(page, KM_USER0); if (bitmap->flags & BITMAP_HOSTENDIAN) @@ -1016,9 +1013,11 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) kunmap_atomic(paddr, KM_USER0); if (b) { /* if the disk bit is set, set the memory bit */ - bitmap_set_memory_bits(bitmap, i << CHUNK_BLOCK_SHIFT(bitmap), - ((i+1) << (CHUNK_BLOCK_SHIFT(bitmap)) >= start) - ); + int needed = ((sector_t)(i+1) << (CHUNK_BLOCK_SHIFT(bitmap)) + >= start); + bitmap_set_memory_bits(bitmap, + (sector_t)i << CHUNK_BLOCK_SHIFT(bitmap), + needed); bit_cnt++; set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN); } @@ -1154,8 +1153,9 @@ void bitmap_daemon_work(struct bitmap *bitmap) spin_lock_irqsave(&bitmap->lock, flags); clear_page_attr(bitmap, page, BITMAP_PAGE_CLEAN); } - bmc = bitmap_get_counter(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap), - &blocks, 0); + bmc = bitmap_get_counter(bitmap, + (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap), + &blocks, 0); if (bmc) { /* if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc); @@ -1169,7 +1169,8 @@ void bitmap_daemon_work(struct bitmap *bitmap) } else if (*bmc == 1) { /* we can clear the bit */ *bmc = 0; - bitmap_count_page(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap), + bitmap_count_page(bitmap, + (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap), -1); /* clear the bit */ @@ -1514,7 +1515,7 @@ void bitmap_dirty_bits(struct bitmap *bitmap, unsigned long s, unsigned long e) unsigned long chunk; for (chunk = s; chunk <= e; chunk++) { - sector_t sec = chunk << CHUNK_BLOCK_SHIFT(bitmap); + sector_t sec = (sector_t)chunk << CHUNK_BLOCK_SHIFT(bitmap); bitmap_set_memory_bits(bitmap, sec, 1); bitmap_file_set_bit(bitmap, sec); } diff --git a/drivers/md/md.c b/drivers/md/md.c index 612343f..fccc834 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3066,11 +3066,8 @@ array_state_store(mddev_t *mddev, const char *buf, size_t len) } else err = -EBUSY; spin_unlock_irq(&mddev->write_lock); - } else { - mddev->ro = 0; - mddev->recovery_cp = MaxSector; - err = do_md_run(mddev); - } + } else + err = -EINVAL; break; case active: if (mddev->pers) { @@ -4297,6 +4294,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) { int err = 0; struct gendisk *disk = mddev->gendisk; + mdk_rdev_t *rdev; if (atomic_read(&mddev->openers) > is_open) { printk("md: %s still in use.\n",mdname(mddev)); @@ -4339,6 +4337,13 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) /* tell userspace to handle 'inactive' */ sysfs_notify_dirent(mddev->sysfs_state); + list_for_each_entry(rdev, &mddev->disks, same_set) + if (rdev->raid_disk >= 0) { + char nm[20]; + sprintf(nm, "rd%d", rdev->raid_disk); + sysfs_remove_link(&mddev->kobj, nm); + } + set_capacity(disk, 0); mddev->changed = 1; @@ -4359,7 +4364,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) * Free resources if final stop */ if (mode == 0) { - mdk_rdev_t *rdev; printk(KERN_INFO "md: %s stopped.\n", mdname(mddev)); @@ -4371,13 +4375,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) } mddev->bitmap_offset = 0; - list_for_each_entry(rdev, &mddev->disks, same_set) - if (rdev->raid_disk >= 0) { - char nm[20]; - sprintf(nm, "rd%d", rdev->raid_disk); - sysfs_remove_link(&mddev->kobj, nm); - } - /* make sure all md_delayed_delete calls have finished */ flush_scheduled_work(); @@ -5705,37 +5702,38 @@ static void status_unused(struct seq_file *seq) static void status_resync(struct seq_file *seq, mddev_t * mddev) { - sector_t max_blocks, resync, res; - unsigned long dt, db, rt; + sector_t max_sectors, resync, res; + unsigned long dt, db; + sector_t rt; int scale; unsigned int per_milli; - resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active))/2; + resync = mddev->curr_resync - atomic_read(&mddev->recovery_active); if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) - max_blocks = mddev->resync_max_sectors >> 1; + max_sectors = mddev->resync_max_sectors; else - max_blocks = mddev->dev_sectors / 2; + max_sectors = mddev->dev_sectors; /* * Should not happen. */ - if (!max_blocks) { + if (!max_sectors) { MD_BUG(); return; } /* Pick 'scale' such that (resync>>scale)*1000 will fit - * in a sector_t, and (max_blocks>>scale) will fit in a + * in a sector_t, and (max_sectors>>scale) will fit in a * u32, as those are the requirements for sector_div. * Thus 'scale' must be at least 10 */ scale = 10; if (sizeof(sector_t) > sizeof(unsigned long)) { - while ( max_blocks/2 > (1ULL<<(scale+32))) + while ( max_sectors/2 > (1ULL<<(scale+32))) scale++; } res = (resync>>scale)*1000; - sector_div(res, (u32)((max_blocks>>scale)+1)); + sector_div(res, (u32)((max_sectors>>scale)+1)); per_milli = res; { @@ -5756,25 +5754,35 @@ static void status_resync(struct seq_file *seq, mddev_t * mddev) (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ? "resync" : "recovery"))), per_milli/10, per_milli % 10, - (unsigned long long) resync, - (unsigned long long) max_blocks); + (unsigned long long) resync/2, + (unsigned long long) max_sectors/2); /* - * We do not want to overflow, so the order of operands and - * the * 100 / 100 trick are important. We do a +1 to be - * safe against division by zero. We only estimate anyway. - * * dt: time from mark until now * db: blocks written from mark until now * rt: remaining time + * + * rt is a sector_t, so could be 32bit or 64bit. + * So we divide before multiply in case it is 32bit and close + * to the limit. + * We scale the divisor (db) by 32 to avoid loosing precision + * near the end of resync when the number of remaining sectors + * is close to 'db'. + * We then divide rt by 32 after multiplying by db to compensate. + * The '+1' avoids division by zero if db is very small. */ dt = ((jiffies - mddev->resync_mark) / HZ); if (!dt) dt++; db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active)) - mddev->resync_mark_cnt; - rt = (dt * ((unsigned long)(max_blocks-resync) / (db/2/100+1)))/100; - seq_printf(seq, " finish=%lu.%lumin", rt / 60, (rt % 60)/6); + rt = max_sectors - resync; /* number of remaining sectors */ + sector_div(rt, db/32+1); + rt *= dt; + rt >>= 5; + + seq_printf(seq, " finish=%lu.%lumin", (unsigned long)rt / 60, + ((unsigned long)rt % 60)/6); seq_printf(seq, " speed=%ldK/sec", db/2/dt); } @@ -5965,7 +5973,7 @@ static int md_seq_show(struct seq_file *seq, void *v) return 0; } -static struct seq_operations md_seq_ops = { +static const struct seq_operations md_seq_ops = { .start = md_seq_start, .next = md_seq_next, .stop = md_seq_stop, diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 81a54f1..499620a 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1809,17 +1809,17 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i r10_bio->sector = sect; raid10_find_phys(conf, r10_bio); - /* Need to check if this section will still be + + /* Need to check if the array will still be * degraded */ - for (j=0; j<conf->copies;j++) { - int d = r10_bio->devs[j].devnum; - if (conf->mirrors[d].rdev == NULL || - test_bit(Faulty, &conf->mirrors[d].rdev->flags)) { + for (j=0; j<conf->raid_disks; j++) + if (conf->mirrors[j].rdev == NULL || + test_bit(Faulty, &conf->mirrors[j].rdev->flags)) { still_degraded = 1; break; } - } + must_sync = bitmap_start_sync(mddev->bitmap, sect, &sync_blocks, still_degraded); diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index 1dba8f0..5cf6c45 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -153,7 +153,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, mult = (fmi->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000; v->rangelow = RSF16_MINFREQ / mult; v->rangehigh = RSF16_MAXFREQ / mult; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO; + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; v->capability = fmi->flags & V4L2_TUNER_CAP_LOW; v->audmode = V4L2_TUNER_MODE_STEREO; v->signal = fmi_getsigstr(fmi); diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index c09ca86..935ff9b 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -233,7 +233,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, mult = (fmr2->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000; v->rangelow = RSF16_MINFREQ / mult; v->rangehigh = RSF16_MAXFREQ / mult; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO; + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; v->capability = fmr2->flags&V4L2_TUNER_CAP_LOW; v->audmode = fmr2->stereo ? V4L2_TUNER_MODE_STEREO: V4L2_TUNER_MODE_MONO; diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 5f58272..c4d181d 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -774,6 +774,7 @@ static int cafe_cam_init(struct cafe_camera *cam) ret = __cafe_cam_reset(cam); if (ret) goto out; + chip.ident = V4L2_IDENT_NONE; chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR; chip.match.addr = cam->sensor_addr; ret = sensor_call(cam, core, g_chip_ident, &chip); diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 0c49a98..1dc070d 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -472,7 +472,7 @@ static int dvb_register(struct cx23885_tsport *port) static struct xc2028_ctrl ctl = { .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, - .scode_table = XC3028_FE_OREN538, + .demod = XC3028_FE_OREN538, }; fe = dvb_attach(xc2028_attach, diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index b0195e8..db2ac9a 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -305,14 +305,17 @@ int ivtv_waitq(wait_queue_head_t *waitq) /* Generic utility functions */ int ivtv_msleep_timeout(unsigned int msecs, int intr) { - int ret; int timeout = msecs_to_jiffies(msecs); do { set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); timeout = schedule_timeout(timeout); - if (intr && (ret = signal_pending(current))) - return ret; + if (intr) { + int ret = signal_pending(current); + + if (ret) + return ret; + } } while (timeout); return 0; } diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c index ceb05bd..85ac707 100644 --- a/drivers/media/video/ivtv/ivtv-gpio.c +++ b/drivers/media/video/ivtv/ivtv-gpio.c @@ -190,8 +190,8 @@ static int subdev_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) mask = itv->card->gpio_audio_detect.mask; if (mask == 0 || (read_reg(IVTV_REG_GPIO_IN) & mask)) - vt->rxsubchans = V4L2_TUNER_MODE_STEREO | - V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + vt->rxsubchans = V4L2_TUNER_SUB_STEREO | + V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; else vt->rxsubchans = V4L2_TUNER_SUB_MONO; return 0; diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 4a2d464..c342a9f 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -180,7 +180,7 @@ int ivtv_set_speed(struct ivtv *itv, int speed) /* Wait for any DMA to finish */ prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); - while (itv->i_flags & IVTV_F_I_DMA) { + while (test_bit(IVTV_F_I_DMA, &itv->i_flags)) { got_sig = signal_pending(current); if (got_sig) break; @@ -1710,7 +1710,8 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) we are waiting unlock first and later lock again. */ mutex_unlock(&itv->serialize_lock); prepare_to_wait(&itv->event_waitq, &wait, TASK_INTERRUPTIBLE); - if ((itv->i_flags & (IVTV_F_I_EV_DEC_STOPPED|IVTV_F_I_EV_VSYNC)) == 0) + if (!test_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags) && + !test_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags)) schedule(); finish_wait(&itv->event_waitq, &wait); mutex_lock(&itv->serialize_lock); diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index 01c14d2..cd9db0b 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -196,7 +196,7 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA bytes_needed, s->name); return -1; } - if (rc && !s->buffers_stolen && (s->s_flags & IVTV_F_S_APPL_IO)) { + if (rc && !s->buffers_stolen && test_bit(IVTV_F_S_APPL_IO, &s->s_flags)) { IVTV_WARN("All %s stream buffers are full. Dropping data.\n", s->name); IVTV_WARN("Cause: the application is not reading fast enough.\n"); } diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index 7912ed6..c087537 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -1063,7 +1063,8 @@ static int ivtv_yuv_udma_frame(struct ivtv *itv, struct ivtv_dma_frame *args) prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); /* if no UDMA is pending and no UDMA is in progress, then the DMA is finished */ - while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) { + while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) || + test_bit(IVTV_F_I_UDMA, &itv->i_flags)) { /* don't interrupt if the DMA is in progress but break off a still pending DMA. */ got_sig = signal_pending(current); diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 66e6eb5..fa6bb85 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -298,7 +298,8 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv, prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); /* if no UDMA is pending and no UDMA is in progress, then the DMA is finished */ - while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) { + while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) || + test_bit(IVTV_F_I_UDMA, &itv->i_flags)) { /* don't interrupt if the DMA is in progress but break off a still pending DMA. */ got_sig = signal_pending(current); diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 399412d..507dc85 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1726,14 +1726,17 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message) static int __uvc_resume(struct usb_interface *intf, int reset) { struct uvc_device *dev = usb_get_intfdata(intf); - int ret; uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n", intf->cur_altsetting->desc.bInterfaceNumber); if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) { - if (reset && (ret = uvc_ctrl_resume_device(dev)) < 0) - return ret; + if (reset) { + int ret = uvc_ctrl_resume_device(dev); + + if (ret < 0) + return ret; + } return uvc_status_resume(dev); } diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index a95e173..6ce974d 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video, /* Buffers are already allocated, bail out. */ if (video->urb_size) - return 0; + return video->urb_size / psize; /* Compute the number of packets. Bulk endpoints might transfer UVC * payloads accross multiple URBs. diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 88f10d6..be64a50 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -42,6 +42,12 @@ printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\ } while (0) +/* Zero out the end of the struct pointed to by p. Everthing after, but + * not including, the specified field is cleared. */ +#define CLEAR_AFTER_FIELD(p, field) \ + memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \ + 0, sizeof(*(p)) - offsetof(typeof(*(p)), field) - sizeof((p)->field)) + struct std_descr { v4l2_std_id std; const char *descr; @@ -544,39 +550,39 @@ static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type) switch (type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: - if (ops->vidioc_try_fmt_vid_cap) + if (ops->vidioc_g_fmt_vid_cap) return 0; break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (ops->vidioc_try_fmt_vid_overlay) + if (ops->vidioc_g_fmt_vid_overlay) return 0; break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: - if (ops->vidioc_try_fmt_vid_out) + if (ops->vidioc_g_fmt_vid_out) return 0; break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: - if (ops->vidioc_try_fmt_vid_out_overlay) + if (ops->vidioc_g_fmt_vid_out_overlay) return 0; break; case V4L2_BUF_TYPE_VBI_CAPTURE: - if (ops->vidioc_try_fmt_vbi_cap) + if (ops->vidioc_g_fmt_vbi_cap) return 0; break; case V4L2_BUF_TYPE_VBI_OUTPUT: - if (ops->vidioc_try_fmt_vbi_out) + if (ops->vidioc_g_fmt_vbi_out) return 0; break; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: - if (ops->vidioc_try_fmt_sliced_vbi_cap) + if (ops->vidioc_g_fmt_sliced_vbi_cap) return 0; break; case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - if (ops->vidioc_try_fmt_sliced_vbi_out) + if (ops->vidioc_g_fmt_sliced_vbi_out) return 0; break; case V4L2_BUF_TYPE_PRIVATE: - if (ops->vidioc_try_fmt_type_private) + if (ops->vidioc_g_fmt_type_private) return 0; break; } @@ -782,44 +788,53 @@ static long __video_do_ioctl(struct file *file, switch (f->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.pix); v4l_print_pix_fmt(vfd, &f->fmt.pix); if (ops->vidioc_s_fmt_vid_cap) ret = ops->vidioc_s_fmt_vid_cap(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_s_fmt_vid_overlay) ret = ops->vidioc_s_fmt_vid_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.pix); v4l_print_pix_fmt(vfd, &f->fmt.pix); if (ops->vidioc_s_fmt_vid_out) ret = ops->vidioc_s_fmt_vid_out(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_s_fmt_vid_out_overlay) ret = ops->vidioc_s_fmt_vid_out_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_s_fmt_vbi_cap) ret = ops->vidioc_s_fmt_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_s_fmt_vbi_out) ret = ops->vidioc_s_fmt_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_s_fmt_sliced_vbi_cap) ret = ops->vidioc_s_fmt_sliced_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_s_fmt_sliced_vbi_out) ret = ops->vidioc_s_fmt_sliced_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_PRIVATE: + /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */ if (ops->vidioc_s_fmt_type_private) ret = ops->vidioc_s_fmt_type_private(file, fh, f); @@ -836,46 +851,55 @@ static long __video_do_ioctl(struct file *file, v4l2_type_names)); switch (f->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.pix); if (ops->vidioc_try_fmt_vid_cap) ret = ops->vidioc_try_fmt_vid_cap(file, fh, f); if (!ret) v4l_print_pix_fmt(vfd, &f->fmt.pix); break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_try_fmt_vid_overlay) ret = ops->vidioc_try_fmt_vid_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.pix); if (ops->vidioc_try_fmt_vid_out) ret = ops->vidioc_try_fmt_vid_out(file, fh, f); if (!ret) v4l_print_pix_fmt(vfd, &f->fmt.pix); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_try_fmt_vid_out_overlay) ret = ops->vidioc_try_fmt_vid_out_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_try_fmt_vbi_cap) ret = ops->vidioc_try_fmt_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_try_fmt_vbi_out) ret = ops->vidioc_try_fmt_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_try_fmt_sliced_vbi_cap) ret = ops->vidioc_try_fmt_sliced_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_try_fmt_sliced_vbi_out) ret = ops->vidioc_try_fmt_sliced_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_PRIVATE: + /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */ if (ops->vidioc_try_fmt_type_private) ret = ops->vidioc_try_fmt_type_private(file, fh, f); @@ -898,6 +922,9 @@ static long __video_do_ioctl(struct file *file, if (ret) break; + if (p->type < V4L2_BUF_TYPE_PRIVATE) + CLEAR_AFTER_FIELD(p, memory); + ret = ops->vidioc_reqbufs(file, fh, p); dbgarg(cmd, "count=%d, type=%s, memory=%s\n", p->count, diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 092333b..643ccca 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1863,22 +1863,20 @@ static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag) { - int num = -1, i; - - for (i = 0; i < NUM_FORMATS; i++) { - if (zoran_formats[i].flags & flag) - num++; - if (num == fmt->index) - break; + unsigned int num, i; + + for (num = i = 0; i < NUM_FORMATS; i++) { + if (zoran_formats[i].flags & flag && num++ == fmt->index) { + strncpy(fmt->description, zoran_formats[i].name, + sizeof(fmt->description) - 1); + /* fmt struct pre-zeroed, so adding '\0' not neeed */ + fmt->pixelformat = zoran_formats[i].fourcc; + if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED) + fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; + return 0; + } } - if (fmt->index < 0 /* late, but not too late */ || i == NUM_FORMATS) - return -EINVAL; - - strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description)-1); - fmt->pixelformat = zoran_formats[i].fourcc; - if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED) - fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; - return 0; + return -EINVAL; } static int zoran_enum_fmt_vid_cap(struct file *file, void *__fh, diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c index 2e2a592..a71e245 100644 --- a/drivers/misc/isl29003.c +++ b/drivers/misc/isl29003.c @@ -64,6 +64,7 @@ struct isl29003_data { struct i2c_client *client; struct mutex lock; u8 reg_cache[ISL29003_NUM_CACHABLE_REGS]; + u8 power_state_before_suspend; }; static int gain_range[] = { @@ -411,6 +412,9 @@ static int __devexit isl29003_remove(struct i2c_client *client) #ifdef CONFIG_PM static int isl29003_suspend(struct i2c_client *client, pm_message_t mesg) { + struct isl29003_data *data = i2c_get_clientdata(client); + + data->power_state_before_suspend = isl29003_get_power_state(client); return isl29003_set_power_state(client, 0); } @@ -421,10 +425,11 @@ static int isl29003_resume(struct i2c_client *client) /* restore registers from cache */ for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++) - if (!i2c_smbus_write_byte_data(client, i, data->reg_cache[i])) + if (i2c_smbus_write_byte_data(client, i, data->reg_cache[i])) return -EIO; - return 0; + return isl29003_set_power_state(client, + data->power_state_before_suspend); } #else diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index fe8041e..b25e9b6 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -254,6 +254,14 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.data.blocks = req->nr_sectors; /* + * The block layer doesn't support all sector count + * restrictions, so we need to be prepared for too big + * requests. + */ + if (brq.data.blocks > card->host->max_blk_count) + brq.data.blocks = card->host->max_blk_count; + + /* * After a read error, we redo the request one sector at a time * in order to accurately determine which sectors can be read * successfully. diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index fa073ab..2649117 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -706,7 +706,7 @@ static void mmc_power_up(struct mmc_host *host) * This delay should be sufficient to allow the power supply * to reach the minimum voltage. */ - mmc_delay(2); + mmc_delay(10); host->ios.clock = host->f_min; host->ios.power_mode = MMC_POWER_ON; @@ -716,7 +716,7 @@ static void mmc_power_up(struct mmc_host *host) * This delay must be at least 74 clock sizes, or 1 ms, or the * time required to reach a stable voltage. */ - mmc_delay(2); + mmc_delay(10); } static void mmc_power_off(struct mmc_host *host) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index a663429..36875dc 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -514,6 +514,7 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id) } host = mmc_priv(mmc); + host->mmc = mmc; /* Bits 12 thru 19 is the designer */ host->hw_designer = (dev->periphid >> 12) & 0xff; /* Bits 20 thru 23 is the revison */ @@ -545,7 +546,6 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id) host->mclk = clk_get_rate(host->clk); DBG(host, "eventual mclk rate: %u Hz\n", host->mclk); } - host->mmc = mmc; host->base = ioremap(dev->res.start, SZ_4K); if (!host->base) { ret = -ENOMEM; diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index b5c375d..c643d0f 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -825,24 +825,23 @@ static int __exit mvsd_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int mvsd_suspend(struct platform_device *dev, pm_message_t state, - u32 level) +static int mvsd_suspend(struct platform_device *dev, pm_message_t state) { struct mmc_host *mmc = platform_get_drvdata(dev); int ret = 0; - if (mmc && level == SUSPEND_DISABLE) + if (mmc) ret = mmc_suspend_host(mmc, state); return ret; } -static int mvsd_resume(struct platform_device *dev, u32 level) +static int mvsd_resume(struct platform_device *dev) { - struct mmc_host *mmc = platform_dev_get_drvdata(dev); + struct mmc_host *mmc = platform_get_drvdata(dev); int ret = 0; - if (mmc && level == RESUME_ENABLE) + if (mmc) ret = mmc_resume_host(mmc); return ret; diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 5570849..bfa25c0 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -157,8 +157,6 @@ struct mmc_omap_host { struct timer_list dma_timer; unsigned dma_len; - short power_pin; - struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS]; struct mmc_omap_slot *current_slot; spinlock_t slot_lock; diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index cd37962..65be279 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -522,8 +522,8 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot)); if (IS_ERR(host)) { - ret = PTR_ERR(host); - goto unmap; + dev_err(&pdev->dev, "cannot allocate host\n"); + return ERR_PTR(PTR_ERR(host)); } slot = sdhci_priv(host); @@ -541,7 +541,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc)); if (ret) { dev_err(&pdev->dev, "cannot request region\n"); - return ERR_PTR(ret); + goto free; } addr = pci_resource_start(pdev, bar); @@ -572,6 +572,8 @@ unmap: release: pci_release_region(pdev, bar); + +free: sdhci_free_host(host); return ERR_PTR(ret); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index f20a834..65c6f99 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -125,7 +125,7 @@ #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ - SDHCI_INT_DATA_END_BIT) + SDHCI_INT_DATA_END_BIT | SDHCI_ADMA_ERROR) #define SDHCI_INT_ALL_MASK ((unsigned int)-1) #define SDHCI_ACMD12_ERR 0x3C diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 8185b1f..cc6369e 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -54,7 +54,7 @@ #define SR_SRWD 0x80 /* SR write protect */ /* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_COUNT 100000 +#define MAX_READY_WAIT_JIFFIES (10 * HZ) /* eg. M25P128 specs 6s max sector erase */ #define CMD_SIZE 4 #ifdef CONFIG_M25PXX_USE_FAST_READ @@ -139,20 +139,20 @@ static inline int write_enable(struct m25p *flash) */ static int wait_till_ready(struct m25p *flash) { - int count; + unsigned long deadline; int sr; - /* one chip guarantees max 5 msec wait here after page writes, - * but potentially three seconds (!) after page erase. - */ - for (count = 0; count < MAX_READY_WAIT_COUNT; count++) { + deadline = jiffies + MAX_READY_WAIT_JIFFIES; + + do { if ((sr = read_sr(flash)) < 0) break; else if (!(sr & SR_WIP)) return 0; - /* REVISIT sometimes sleeping would be best */ - } + cond_resched(); + + } while (!time_after_eq(jiffies, deadline)); return 1; } @@ -246,10 +246,12 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) mutex_lock(&flash->lock); /* whole-chip erase? */ - if (len == flash->mtd.size && erase_chip(flash)) { - instr->state = MTD_ERASE_FAILED; - mutex_unlock(&flash->lock); - return -EIO; + if (len == flash->mtd.size) { + if (erase_chip(flash)) { + instr->state = MTD_ERASE_FAILED; + mutex_unlock(&flash->lock); + return -EIO; + } /* REVISIT in some cases we could speed up erasing large regions * by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index fdd6ae8..bccb4b1 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -48,11 +48,11 @@ static LIST_HEAD(mtd_notifiers); */ static void mtd_release(struct device *dev) { - struct mtd_info *mtd = dev_to_mtd(dev); + dev_t index = MTD_DEVT(dev_to_mtd(dev)->index); /* remove /dev/mtdXro node if needed */ - if (MTD_DEVT(mtd->index)) - device_destroy(mtd_class, MTD_DEVT(mtd->index) + 1); + if (index) + device_destroy(mtd_class, index + 1); } static ssize_t mtd_type_show(struct device *dev, @@ -132,6 +132,17 @@ static ssize_t mtd_writesize_show(struct device *dev, } static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL); +static ssize_t mtd_subpagesize_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mtd_info *mtd = dev_to_mtd(dev); + unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft; + + return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize); + +} +static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL); + static ssize_t mtd_oobsize_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -169,6 +180,7 @@ static struct attribute *mtd_attrs[] = { &dev_attr_size.attr, &dev_attr_erasesize.attr, &dev_attr_writesize.attr, + &dev_attr_subpagesize.attr, &dev_attr_oobsize.attr, &dev_attr_numeraseregions.attr, &dev_attr_name.attr, diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index 92285d0..af8b42e 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -74,8 +74,7 @@ static int get_sb_mtd_aux(struct file_system_type *fs_type, int flags, ret = fill_super(sb, data, flags & MS_SILENT ? 1 : 0); if (ret < 0) { - up_write(&sb->s_umount); - deactivate_super(sb); + deactivate_locked_super(sb); return ret; } diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 448487e..a740053 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -338,12 +338,12 @@ static int ixp4xx_mdio_register(void) if (cpu_is_ixp43x()) { /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH)) - return -ENOSYS; + return -ENODEV; mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT; } else { /* All MII PHY accesses use NPE-B Ethernet registers */ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0)) - return -ENOSYS; + return -ENODEV; mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; } @@ -1174,7 +1174,7 @@ static int __devinit eth_init_one(struct platform_device *pdev) regs_phys = IXP4XX_EthC_BASE_PHYS; break; default: - err = -ENOSYS; + err = -ENODEV; goto err_free; } @@ -1189,15 +1189,10 @@ static int __devinit eth_init_one(struct platform_device *pdev) goto err_free; } - if (register_netdev(dev)) { - err = -EIO; - goto err_npe_rel; - } - port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name); if (!port->mem_res) { err = -EBUSY; - goto err_unreg; + goto err_npe_rel; } port->plat = plat; @@ -1215,20 +1210,25 @@ static int __devinit eth_init_one(struct platform_device *pdev) snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy); port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0, PHY_INTERFACE_MODE_MII); - if (IS_ERR(port->phydev)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(port->phydev); - } + if ((err = IS_ERR(port->phydev))) + goto err_free_mem; port->phydev->irq = PHY_POLL; + if ((err = register_netdev(dev))) + goto err_phy_dis; + printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy, npe_name(port->npe)); return 0; -err_unreg: - unregister_netdev(dev); +err_phy_dis: + phy_disconnect(port->phydev); +err_free_mem: + npe_port_tab[NPE_ID(port->id)] = NULL; + platform_set_drvdata(pdev, NULL); + release_resource(port->mem_res); err_npe_rel: npe_release(port->npe); err_free: @@ -1242,6 +1242,7 @@ static int __devexit eth_remove_one(struct platform_device *pdev) struct port *port = netdev_priv(dev); unregister_netdev(dev); + phy_disconnect(port->phydev); npe_port_tab[NPE_ID(port->id)] = NULL; platform_set_drvdata(pdev, NULL); npe_release(port->npe); diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index d478391..b0cb29d 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -54,8 +54,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "2.0.0" -#define DRV_MODULE_RELDATE "April 2, 2009" +#define DRV_MODULE_VERSION "2.0.1" +#define DRV_MODULE_RELDATE "May 6, 2009" #define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-4.6.16.fw" #define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-4.6.16.fw" #define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-4.6.17.fw" @@ -2600,6 +2600,7 @@ bnx2_get_hw_tx_cons(struct bnx2_napi *bnapi) /* Tell compiler that status block fields can change. */ barrier(); cons = *bnapi->hw_tx_cons_ptr; + barrier(); if (unlikely((cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT)) cons++; return cons; @@ -2879,6 +2880,7 @@ bnx2_get_hw_rx_cons(struct bnx2_napi *bnapi) /* Tell compiler that status block fields can change. */ barrier(); cons = *bnapi->hw_rx_cons_ptr; + barrier(); if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT)) cons++; return cons; diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 553a899..46d312b 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -1706,10 +1706,8 @@ void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave * Called with RTNL */ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) - __releases(&bond->curr_slave_lock) - __releases(&bond->lock) __acquires(&bond->lock) - __acquires(&bond->curr_slave_lock) + __releases(&bond->lock) { struct bonding *bond = netdev_priv(bond_dev); struct sockaddr *sa = addr; @@ -1745,9 +1743,6 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) } } - write_unlock_bh(&bond->curr_slave_lock); - read_unlock(&bond->lock); - if (swap_slave) { alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave); alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave); @@ -1755,16 +1750,15 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr, bond->alb_info.rlb_enabled); + read_lock(&bond->lock); alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr); if (bond->alb_info.rlb_enabled) { /* inform clients mac address has changed */ rlb_req_update_slave_clients(bond, bond->curr_active_slave); } + read_unlock(&bond->lock); } - read_lock(&bond->lock); - write_lock_bh(&bond->curr_slave_lock); - return 0; } diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 63369b6..7482402 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2213,33 +2213,24 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in { struct bonding *bond = netdev_priv(bond_dev); struct slave *slave; - int i, found = 0; - - if (info->slave_id < 0) { - return -ENODEV; - } + int i, res = -ENODEV; read_lock(&bond->lock); bond_for_each_slave(bond, slave, i) { if (i == (int)info->slave_id) { - found = 1; + res = 0; + strcpy(info->slave_name, slave->dev->name); + info->link = slave->link; + info->state = slave->state; + info->link_failure_count = slave->link_failure_count; break; } } read_unlock(&bond->lock); - if (found) { - strcpy(info->slave_name, slave->dev->name); - info->link = slave->link; - info->state = slave->state; - info->link_failure_count = slave->link_failure_count; - } else { - return -ENODEV; - } - - return 0; + return res; } /*-------------------------------- Monitoring -------------------------------*/ @@ -5167,16 +5158,15 @@ int bond_create(char *name, struct bond_params *params) up_write(&bonding_rwsem); rtnl_unlock(); /* allows sysfs registration of net device */ res = bond_create_sysfs_entry(netdev_priv(bond_dev)); - if (res < 0) { - rtnl_lock(); - down_write(&bonding_rwsem); - bond_deinit(bond_dev); - unregister_netdevice(bond_dev); - goto out_rtnl; - } + if (res < 0) + goto out_unreg; return 0; +out_unreg: + rtnl_lock(); + down_write(&bonding_rwsem); + unregister_netdevice(bond_dev); out_bond: bond_deinit(bond_dev); out_netdev: @@ -5191,7 +5181,6 @@ static int __init bonding_init(void) { int i; int res; - struct bonding *bond; printk(KERN_INFO "%s", version); @@ -5222,13 +5211,6 @@ static int __init bonding_init(void) goto out; err: - list_for_each_entry(bond, &bond_dev_list, bond_list) { - bond_work_cancel_all(bond); - destroy_workqueue(bond->wq); - } - - bond_destroy_sysfs(); - rtnl_lock(); bond_free_all(); rtnl_unlock(); diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index e1bd690..4f68aeb 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -3779,7 +3779,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, adapter->params.info = ai; adapter->params.nports = ai->nports0 + ai->nports1; - adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1); + adapter->params.chan_map = (!!ai->nports0) | (!!ai->nports1 << 1); adapter->params.rev = t3_read_reg(adapter, A_PL_REV); /* * We used to only run the "adapter check task" once a second if diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6a46cee..b1419e2 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3738,7 +3738,7 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); - if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags))) + if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 6e317ca..16a4138 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include <asm/io.h> #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0100" +#define DRV_VERSION "EHEA_0101" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 604c844..b22dab9 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -545,14 +545,17 @@ static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array, x &= (arr_len - 1); pref = skb_array[x]; - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); - - pref = (skb_array[x]->data); - prefetch(pref); - prefetch(pref + EHEA_CACHE_LINE); - prefetch(pref + EHEA_CACHE_LINE * 2); - prefetch(pref + EHEA_CACHE_LINE * 3); + if (pref) { + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); + + pref = (skb_array[x]->data); + prefetch(pref); + prefetch(pref + EHEA_CACHE_LINE); + prefetch(pref + EHEA_CACHE_LINE * 2); + prefetch(pref + EHEA_CACHE_LINE * 3); + } + skb = skb_array[skb_index]; skb_array[skb_index] = NULL; return skb; @@ -569,12 +572,14 @@ static inline struct sk_buff *get_skb_by_index_ll(struct sk_buff **skb_array, x &= (arr_len - 1); pref = skb_array[x]; - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); + if (pref) { + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); - pref = (skb_array[x]->data); - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); + pref = (skb_array[x]->data); + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); + } skb = skb_array[wqe_index]; skb_array[wqe_index] = NULL; diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 08c8014..e253435 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -2006,7 +2006,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; u32 rctl; u32 srrctl = 0; - int i, j; + int i; rctl = rd32(E1000_RCTL); @@ -2071,8 +2071,6 @@ static void igb_setup_rctl(struct igb_adapter *adapter) if (adapter->vfs_allocated_count) { u32 vmolr; - j = adapter->rx_ring[0].reg_idx; - /* set all queue drop enable bits */ wr32(E1000_QDE, ALL_QUEUES); srrctl |= E1000_SRRCTL_DROP_EN; @@ -2080,16 +2078,16 @@ static void igb_setup_rctl(struct igb_adapter *adapter) /* disable queue 0 to prevent tail write w/o re-config */ wr32(E1000_RXDCTL(0), 0); - vmolr = rd32(E1000_VMOLR(j)); + vmolr = rd32(E1000_VMOLR(adapter->vfs_allocated_count)); if (rctl & E1000_RCTL_LPE) vmolr |= E1000_VMOLR_LPE; - if (adapter->num_rx_queues > 0) + if (adapter->num_rx_queues > 1) vmolr |= E1000_VMOLR_RSSE; - wr32(E1000_VMOLR(j), vmolr); + wr32(E1000_VMOLR(adapter->vfs_allocated_count), vmolr); } for (i = 0; i < adapter->num_rx_queues; i++) { - j = adapter->rx_ring[i].reg_idx; + int j = adapter->rx_ring[i].reg_idx; wr32(E1000_SRRCTL(j), srrctl); } diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 7942c4d..9ee873e 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -951,7 +951,6 @@ static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, if (err) { mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn); goto out; - return err; } qp->event = mlx4_en_sqp_event; diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index b3185bf..a400d71 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -393,12 +393,12 @@ struct mv643xx_eth_private { struct work_struct tx_timeout_task; struct napi_struct napi; + u8 oom; u8 work_link; u8 work_tx; u8 work_tx_end; u8 work_rx; u8 work_rx_refill; - u8 work_rx_oom; int skb_size; struct sk_buff_head rx_recycle; @@ -661,7 +661,7 @@ static int rxq_refill(struct rx_queue *rxq, int budget) dma_get_cache_alignment() - 1); if (skb == NULL) { - mp->work_rx_oom |= 1 << rxq->index; + mp->oom = 1; goto oom; } @@ -1255,7 +1255,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) spin_lock_bh(&mp->mib_counters_lock); p->good_octets_received += mib_read(mp, 0x00); - p->good_octets_received += (u64)mib_read(mp, 0x04) << 32; p->bad_octets_received += mib_read(mp, 0x08); p->internal_mac_transmit_err += mib_read(mp, 0x0c); p->good_frames_received += mib_read(mp, 0x10); @@ -1269,7 +1268,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) p->frames_512_to_1023_octets += mib_read(mp, 0x30); p->frames_1024_to_max_octets += mib_read(mp, 0x34); p->good_octets_sent += mib_read(mp, 0x38); - p->good_octets_sent += (u64)mib_read(mp, 0x3c) << 32; p->good_frames_sent += mib_read(mp, 0x40); p->excessive_collision += mib_read(mp, 0x44); p->multicast_frames_sent += mib_read(mp, 0x48); @@ -2167,8 +2165,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) mp = container_of(napi, struct mv643xx_eth_private, napi); - mp->work_rx_refill |= mp->work_rx_oom; - mp->work_rx_oom = 0; + if (unlikely(mp->oom)) { + mp->oom = 0; + del_timer(&mp->rx_oom); + } work_done = 0; while (work_done < budget) { @@ -2182,8 +2182,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) continue; } - queue_mask = mp->work_tx | mp->work_tx_end | - mp->work_rx | mp->work_rx_refill; + queue_mask = mp->work_tx | mp->work_tx_end | mp->work_rx; + if (likely(!mp->oom)) + queue_mask |= mp->work_rx_refill; + if (!queue_mask) { if (mv643xx_eth_collect_events(mp)) continue; @@ -2204,7 +2206,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) txq_maybe_wake(mp->txq + queue); } else if (mp->work_rx & queue_mask) { work_done += rxq_process(mp->rxq + queue, work_tbd); - } else if (mp->work_rx_refill & queue_mask) { + } else if (!mp->oom && (mp->work_rx_refill & queue_mask)) { work_done += rxq_refill(mp->rxq + queue, work_tbd); } else { BUG(); @@ -2212,7 +2214,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) } if (work_done < budget) { - if (mp->work_rx_oom) + if (mp->oom) mod_timer(&mp->rx_oom, jiffies + (HZ / 10)); napi_complete(napi); wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT); @@ -2372,7 +2374,7 @@ static int mv643xx_eth_open(struct net_device *dev) rxq_refill(mp->rxq + i, INT_MAX); } - if (mp->work_rx_oom) { + if (mp->oom) { mp->rx_oom.expires = jiffies + (HZ / 10); add_timer(&mp->rx_oom); } diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index eb66f65..7d83896 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -374,18 +374,17 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, dev->ethtool_ops = &ne2k_pci_ethtool_ops; NS8390_init(dev, 0); + memcpy(dev->dev_addr, SA_prom, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + i = register_netdev(dev); if (i) goto err_out_free_netdev; - for(i = 0; i < 6; i++) - dev->dev_addr[i] = SA_prom[i]; printk("%s: %s found at %#lx, IRQ %d, %pM.\n", dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq, dev->dev_addr); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - return 0; err_out_free_netdev: diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index eceadf7..bf4af52 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -664,7 +664,7 @@ static int netconsole_netdev_event(struct notifier_block *this, struct netconsole_target *nt; struct net_device *dev = ptr; - if (!(event == NETDEV_CHANGENAME)) + if (!(event == NETDEV_CHANGENAME || event == NETDEV_UNREGISTER)) goto done; spin_lock_irqsave(&target_list_lock, flags); @@ -675,6 +675,15 @@ static int netconsole_netdev_event(struct notifier_block *this, case NETDEV_CHANGENAME: strlcpy(nt->np.dev_name, dev->name, IFNAMSIZ); break; + case NETDEV_UNREGISTER: + if (!nt->enabled) + break; + netpoll_cleanup(&nt->np); + nt->enabled = 0; + printk(KERN_INFO "netconsole: network logging stopped" + ", interface %s unregistered\n", + dev->name); + break; } } netconsole_target_put(nt); diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 8ee2103..dfc6cf7 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -180,6 +180,20 @@ config USB_NET_CDCETHER IEEE 802 "local assignment" bit is set in the address, a "usbX" name is used instead. +config USB_NET_CDC_EEM + tristate "CDC EEM support" + depends on USB_USBNET && EXPERIMENTAL + help + This option supports devices conforming to the Communication Device + Class (CDC) Ethernet Emulation Model, a specification that's easy to + implement in device firmware. The CDC EEM specifications are available + from <http://www.usb.org/>. + + This driver creates an interface named "ethX", where X depends on + what other networking devices you have in use. However, if the + IEEE 802 "local assignment" bit is set in the address, a "usbX" + name is used instead. + config USB_NET_DM9601 tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices" depends on USB_USBNET diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 88a87eeb3..c8aef62 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_RTL8150) += rtl8150.o obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o +obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o obj-$(CONFIG_USB_NET_GL620A) += gl620a.o diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c new file mode 100644 index 0000000..80e0177 --- /dev/null +++ b/drivers/net/usb/cdc_eem.c @@ -0,0 +1,381 @@ +/* + * USB CDC EEM network interface driver + * Copyright (C) 2009 Oberthur Technologies + * by Omar Laazimani, Olivier Condemine + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ctype.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/crc32.h> +#include <linux/usb/cdc.h> +#include <linux/usb/usbnet.h> + + +/* + * This driver is an implementation of the CDC "Ethernet Emulation + * Model" (EEM) specification, which encapsulates Ethernet frames + * for transport over USB using a simpler USB device model than the + * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet"). + * + * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf + * + * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24, + * 2.6.27 and 2.6.30rc2 kernel. + * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel). + * build on 23-April-2009 + */ + +#define EEM_HEAD 2 /* 2 byte header */ + +/*-------------------------------------------------------------------------*/ + +static void eem_linkcmd_complete(struct urb *urb) +{ + dev_kfree_skb(urb->context); + usb_free_urb(urb); +} + +static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb) +{ + struct urb *urb; + int status; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) + goto fail; + + usb_fill_bulk_urb(urb, dev->udev, dev->out, + skb->data, skb->len, eem_linkcmd_complete, skb); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + usb_free_urb(urb); +fail: + dev_kfree_skb(skb); + devwarn(dev, "link cmd failure\n"); + return; + } +} + +static int eem_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status = 0; + + status = usbnet_get_endpoints(dev, intf); + if (status < 0) { + usb_set_intfdata(intf, NULL); + usb_driver_release_interface(driver_of(intf), intf); + return status; + } + + /* no jumbogram (16K) support for now */ + + dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN; + + return 0; +} + +/* + * EEM permits packing multiple Ethernet frames into USB transfers + * (a "bundle"), but for TX we don't try to do that. + */ +static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + struct sk_buff *skb2 = NULL; + u16 len = skb->len; + u32 crc = 0; + int padlen = 0; + + /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is + * zero, stick two bytes of zero length EEM packet on the end. + * Else the framework would add invalid single byte padding, + * since it can't know whether ZLPs will be handled right by + * all the relevant hardware and software. + */ + if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket)) + padlen += 2; + + if (!skb_cloned(skb)) { + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + + if ((tailroom >= ETH_FCS_LEN + padlen) + && (headroom >= EEM_HEAD)) + goto done; + + if ((headroom + tailroom) + > (EEM_HEAD + ETH_FCS_LEN + padlen)) { + skb->data = memmove(skb->head + + EEM_HEAD, + skb->data, + skb->len); + skb_set_tail_pointer(skb, len); + goto done; + } + } + + skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags); + if (!skb2) + return NULL; + + dev_kfree_skb_any(skb); + skb = skb2; + +done: + /* we don't use the "no Ethernet CRC" option */ + crc = crc32_le(~0, skb->data, skb->len); + crc = ~crc; + + put_unaligned_le32(crc, skb_put(skb, 4)); + + /* EEM packet header format: + * b0..13: length of ethernet frame + * b14: bmCRC (1 == valid Ethernet CRC) + * b15: bmType (0 == data) + */ + len = skb->len; + put_unaligned_le16(BIT(14) | len, skb_push(skb, 2)); + + /* Bundle a zero length EEM packet if needed */ + if (padlen) + put_unaligned_le16(0, skb_put(skb, 2)); + + return skb; +} + +static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + /* + * Our task here is to strip off framing, leaving skb with one + * data frame for the usbnet framework code to process. But we + * may have received multiple EEM payloads, or command payloads. + * So we must process _everything_ as if it's a header, except + * maybe the last data payload + * + * REVISIT the framework needs updating so that when we consume + * all payloads (the last or only message was a command, or a + * zero length EEM packet) that is not accounted as an rx_error. + */ + do { + struct sk_buff *skb2 = NULL; + u16 header; + u16 len = 0; + + /* incomplete EEM header? */ + if (skb->len < EEM_HEAD) + return 0; + + /* + * EEM packet header format: + * b0..14: EEM type dependant (Data or Command) + * b15: bmType + */ + header = get_unaligned_le16(skb->data); + skb_pull(skb, EEM_HEAD); + + /* + * The bmType bit helps to denote when EEM + * packet is data or command : + * bmType = 0 : EEM data payload + * bmType = 1 : EEM (link) command + */ + if (header & BIT(15)) { + u16 bmEEMCmd; + + /* + * EEM (link) command packet: + * b0..10: bmEEMCmdParam + * b11..13: bmEEMCmd + * b14: bmReserved (must be 0) + * b15: 1 (EEM command) + */ + if (header & BIT(14)) { + devdbg(dev, "reserved command %04x\n", header); + continue; + } + + bmEEMCmd = (header >> 11) & 0x7; + switch (bmEEMCmd) { + + /* Responding to echo requests is mandatory. */ + case 0: /* Echo command */ + len = header & 0x7FF; + + /* bogus command? */ + if (skb->len < len) + return 0; + + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + goto next; + skb_trim(skb2, len); + put_unaligned_le16(BIT(15) | (1 << 11) | len, + skb_push(skb2, 2)); + eem_linkcmd(dev, skb2); + break; + + /* + * Host may choose to ignore hints. + * - suspend: peripheral ready to suspend + * - response: suggest N millisec polling + * - response complete: suggest N sec polling + */ + case 2: /* Suspend hint */ + case 3: /* Response hint */ + case 4: /* Response complete hint */ + continue; + + /* + * Hosts should never receive host-to-peripheral + * or reserved command codes; or responses to an + * echo command we didn't send. + */ + case 1: /* Echo response */ + case 5: /* Tickle */ + default: /* reserved */ + devwarn(dev, "unexpected link command %d\n", + bmEEMCmd); + continue; + } + + } else { + u32 crc, crc2; + int is_last; + + /* zero length EEM packet? */ + if (header == 0) + continue; + + /* + * EEM data packet header : + * b0..13: length of ethernet frame + * b14: bmCRC + * b15: 0 (EEM data) + */ + len = header & 0x3FFF; + + /* bogus EEM payload? */ + if (skb->len < len) + return 0; + + /* bogus ethernet frame? */ + if (len < (ETH_HLEN + ETH_FCS_LEN)) + goto next; + + /* + * Treat the last payload differently: framework + * code expects our "fixup" to have stripped off + * headers, so "skb" is a data packet (or error). + * Else if it's not the last payload, keep "skb" + * for further processing. + */ + is_last = (len == skb->len); + if (is_last) + skb2 = skb; + else { + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + return 0; + } + + crc = get_unaligned_le32(skb2->data + + len - ETH_FCS_LEN); + skb_trim(skb2, len - ETH_FCS_LEN); + + /* + * The bmCRC helps to denote when the CRC field in + * the Ethernet frame contains a calculated CRC: + * bmCRC = 1 : CRC is calculated + * bmCRC = 0 : CRC = 0xDEADBEEF + */ + if (header & BIT(14)) + crc2 = ~crc32_le(~0, skb2->data, len); + else + crc2 = 0xdeadbeef; + + if (is_last) + return crc == crc2; + + if (unlikely(crc != crc2)) { + dev->stats.rx_errors++; + dev_kfree_skb_any(skb2); + } else + usbnet_skb_return(dev, skb2); + } + +next: + skb_pull(skb, len); + } while (skb->len); + + return 1; +} + +static const struct driver_info eem_info = { + .description = "CDC EEM Device", + .flags = FLAG_ETHER, + .bind = eem_bind, + .rx_fixup = eem_rx_fixup, + .tx_fixup = eem_tx_fixup, +}; + +/*-------------------------------------------------------------------------*/ + +static const struct usb_device_id products[] = { +{ + USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM, + USB_CDC_PROTO_EEM), + .driver_info = (unsigned long) &eem_info, +}, +{ + /* EMPTY == end of list */ +}, +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver eem_driver = { + .name = "cdc_eem", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, +}; + + +static int __init eem_init(void) +{ + return usb_register(&eem_driver); +} +module_init(eem_init); + +static void __exit eem_exit(void) +{ + usb_deregister(&eem_driver); +} +module_exit(eem_exit); + +MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>"); +MODULE_DESCRIPTION("USB CDC EEM"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index dc16653..5a72833 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -941,6 +941,16 @@ static int smsc95xx_reset(struct usbnet *dev) if (netif_msg_ifup(dev)) devdbg(dev, "ID_REV = 0x%08x", read_buf); + /* Configure GPIO pins as LED outputs */ + write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED | + LED_GPIO_CFG_FDX_LED; + ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf); + if (ret < 0) { + devwarn(dev, "Failed to write LED_GPIO_CFG register, ret=%d", + ret); + return ret; + } + /* Init Tx */ write_buf = 0; ret = smsc95xx_write_reg(dev, FLOW, write_buf); @@ -1231,6 +1241,11 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0424, 0x9500), .driver_info = (unsigned long) &smsc95xx_info, }, + { + /* SMSC9512/9514 USB Hub & Ethernet Device */ + USB_DEVICE(0x0424, 0xec00), + .driver_info = (unsigned long) &smsc95xx_info, + }, { }, /* END */ }; MODULE_DEVICE_TABLE(usb, products); diff --git a/drivers/net/usb/smsc95xx.h b/drivers/net/usb/smsc95xx.h index 66b5c84..86bc449 100644 --- a/drivers/net/usb/smsc95xx.h +++ b/drivers/net/usb/smsc95xx.h @@ -99,6 +99,9 @@ #define PM_CTL_WUPS_MULTI_ (0x00000003) #define LED_GPIO_CFG (0x24) +#define LED_GPIO_CFG_SPD_LED (0x01000000) +#define LED_GPIO_CFG_LNK_LED (0x00100000) +#define LED_GPIO_CFG_FDX_LED (0x00010000) #define GPIO_CFG (0x28) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 9c82a39..4d1d479 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -616,10 +616,11 @@ static int virtnet_open(struct net_device *dev) static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, struct scatterlist *data, int out, int in) { - struct scatterlist sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; + struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; struct virtio_net_ctrl_hdr ctrl; virtio_net_ctrl_ack status = ~0; unsigned int tmp; + int i; if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) { BUG(); /* Caller should know better */ @@ -637,7 +638,8 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, sg_init_table(sg, out + in); sg_set_buf(&sg[0], &ctrl, sizeof(ctrl)); - memcpy(&sg[1], data, sizeof(struct scatterlist) * (out + in - 2)); + for_each_sg(data, s, out + in - 2, i) + sg_set_buf(&sg[i + 1], sg_virt(s), s->length); sg_set_buf(&sg[out + in - 1], &status, sizeof(status)); if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0) @@ -692,7 +694,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) promisc = ((dev->flags & IFF_PROMISC) != 0); allmulti = ((dev->flags & IFF_ALLMULTI) != 0); - sg_set_buf(sg, &promisc, sizeof(promisc)); + sg_init_one(sg, &promisc, sizeof(promisc)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX, VIRTIO_NET_CTRL_RX_PROMISC, @@ -700,7 +702,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) dev_warn(&dev->dev, "Failed to %sable promisc mode.\n", promisc ? "en" : "dis"); - sg_set_buf(sg, &allmulti, sizeof(allmulti)); + sg_init_one(sg, &allmulti, sizeof(allmulti)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX, VIRTIO_NET_CTRL_RX_ALLMULTI, @@ -716,6 +718,8 @@ static void virtnet_set_rx_mode(struct net_device *dev) return; } + sg_init_table(sg, 2); + /* Store the unicast list and count in the front of the buffer */ mac_data->entries = dev->uc_count; addr = dev->uc_list; @@ -744,24 +748,24 @@ static void virtnet_set_rx_mode(struct net_device *dev) kfree(buf); } -static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) +static void virtnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) { struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; - sg_set_buf(&sg, &vid, sizeof(vid)); + sg_init_one(&sg, &vid, sizeof(vid)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN, VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1, 0)) dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid); } -static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) +static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) { struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; - sg_set_buf(&sg, &vid, sizeof(vid)); + sg_init_one(&sg, &vid, sizeof(vid)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN, VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1, 0)) @@ -794,8 +798,8 @@ static const struct net_device_ops virtnet_netdev = { .ndo_set_mac_address = virtnet_set_mac_address, .ndo_set_rx_mode = virtnet_set_rx_mode, .ndo_change_mtu = virtnet_change_mtu, - .ndo_vlan_rx_add_vid = virnet_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = virnet_vlan_rx_kill_vid, + .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = virtnet_netpoll, #endif diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 3bf7d3f..765a7f5 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -1249,7 +1249,7 @@ static int __devinit hss_init_one(struct platform_device *pdev) return -ENOMEM; if ((port->npe = npe_request(0)) == NULL) { - err = -ENOSYS; + err = -ENODEV; goto err_free; } @@ -1311,7 +1311,7 @@ static int __init hss_init_module(void) if ((ixp4xx_read_feature_bits() & (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) != (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) - return -ENOSYS; + return -ENODEV; spin_lock_init(&npe_lock); diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index c36d3a3..d734757 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -6501,7 +6501,10 @@ static int airo_get_encode(struct net_device *dev, /* Copy the key to the user buffer */ dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf)); - memcpy(extra, buf, dwrq->length); + if (dwrq->length != -1) + memcpy(extra, buf, dwrq->length); + else + dwrq->length = 0; return 0; } @@ -6659,7 +6662,10 @@ static int airo_get_encodeext(struct net_device *dev, /* Copy the key to the user buffer */ ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf)); - memcpy(extra, buf, ext->key_len); + if (ext->key_len != -1) + memcpy(extra, buf, ext->key_len); + else + ext->key_len = 0; return 0; } diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index a08bc8a..32df27a 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -214,7 +214,7 @@ static struct pci_driver ath5k_pci_driver = { * Prototypes - MAC 802.11 stack related functions */ static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb); -static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel); +static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan); static int ath5k_reset_wake(struct ath5k_softc *sc); static int ath5k_start(struct ieee80211_hw *hw); static void ath5k_stop(struct ieee80211_hw *hw); @@ -1038,16 +1038,13 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) if (chan->center_freq != sc->curchan->center_freq || chan->hw_value != sc->curchan->hw_value) { - sc->curchan = chan; - sc->curband = &sc->sbands[chan->band]; - /* * To switch channels clear any pending DMA operations; * wait long enough for the RX fifo to drain, reset the * hardware at the new frequency, and then re-enable * the relevant bits of the h/w. */ - return ath5k_reset(sc, true, true); + return ath5k_reset(sc, chan); } return 0; @@ -2314,7 +2311,7 @@ ath5k_init(struct ath5k_softc *sc) sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | AR5K_INT_FATAL | AR5K_INT_GLOBAL; - ret = ath5k_reset(sc, false, false); + ret = ath5k_reset(sc, NULL); if (ret) goto done; @@ -2599,18 +2596,25 @@ drop_packet: return NETDEV_TX_OK; } +/* + * Reset the hardware. If chan is not NULL, then also pause rx/tx + * and change to the given channel. + */ static int -ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel) +ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan) { struct ath5k_hw *ah = sc->ah; int ret; ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); - if (stop) { + if (chan) { ath5k_hw_set_imr(ah, 0); ath5k_txq_cleanup(sc); ath5k_rx_stop(sc); + + sc->curchan = chan; + sc->curband = &sc->sbands[chan->band]; } ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); if (ret) { @@ -2648,7 +2652,7 @@ ath5k_reset_wake(struct ath5k_softc *sc) { int ret; - ret = ath5k_reset(sc, true, true); + ret = ath5k_reset(sc, sc->curchan); if (!ret) ieee80211_wake_queues(sc->hw); diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 9770bb3..4904a07 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -424,7 +424,7 @@ ath5k_debug_dump_bands(struct ath5k_softc *sc) for (b = 0; b < IEEE80211_NUM_BANDS; b++) { struct ieee80211_supported_band *band = &sc->sbands[b]; - char bname[5]; + char bname[6]; switch (band->band) { case IEEE80211_BAND_2GHZ: strcpy(bname, "2 GHz"); diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index edfa5e1..bd438d8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -101,8 +101,8 @@ struct iwl_cfg iwl6000_2agn_cfg = { .eeprom_ver = EEPROM_5000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, .mod_params = &iwl50_mod_params, - .valid_tx_ant = ANT_BC, - .valid_rx_ant = ANT_BC, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, .need_pll_cfg = false, }; @@ -117,8 +117,8 @@ struct iwl_cfg iwl6050_2agn_cfg = { .eeprom_ver = EEPROM_5000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, .mod_params = &iwl50_mod_params, - .valid_tx_ant = ANT_BC, - .valid_rx_ant = ANT_BC, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, .need_pll_cfg = false, }; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 1ef4192..3bb28db 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3636,7 +3636,9 @@ static struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x0085, 0x1112, iwl6000_2ag_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1122, iwl6000_2ag_cfg)}, {IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000_2agn_cfg)}, {IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000_2agn_cfg)}, {IWL_PCI_DEVICE(0x0082, PCI_ANY_ID, iwl6000_2agn_cfg)}, {IWL_PCI_DEVICE(0x0085, PCI_ANY_ID, iwl6000_3agn_cfg)}, {IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)}, diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 23644cf..e7c65c4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -925,11 +925,11 @@ void iwl_bg_scan_completed(struct work_struct *work) IWL_DEBUG_SCAN(priv, "SCAN complete scan\n"); + ieee80211_scan_completed(priv->hw, false); + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - ieee80211_scan_completed(priv->hw, false); - /* Since setting the TXPOWER may have been deferred while * performing the scan, fire one off */ mutex_lock(&priv->mutex); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 5798fe4..44ab03a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -719,6 +719,14 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, { unsigned long flags; int ret = 0; + __le16 key_flags = 0; + + key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); + key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags &= ~STA_KEY_FLG_INVALID; + + if (sta_id == priv->hw_params.bcast_sta_id) + key_flags |= STA_KEY_MULTICAST_MSK; keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; @@ -738,6 +746,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, "no space for a new key"); + priv->stations[sta_id].sta.key.key_flags = key_flags; + + /* This copy is acutally not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); @@ -754,9 +765,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv, { u8 sta_id = IWL_INVALID_STATION; unsigned long flags; - __le16 key_flags = 0; int i; - DECLARE_MAC_BUF(mac); sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { @@ -771,16 +780,8 @@ void iwl_update_tkip_key(struct iwl_priv *priv, return; } - key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags &= ~STA_KEY_FLG_INVALID; - - if (sta_id == priv->hw_params.bcast_sta_id) - key_flags |= STA_KEY_MULTICAST_MSK; - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; for (i = 0; i < 5; i++) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 617c423..4cce661 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1694,7 +1694,6 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) rxq->free_count = 0; spin_unlock_irqrestore(&rxq->lock, flags); } -EXPORT_SYMBOL(iwl3945_rx_queue_reset); /* * this should be called while priv->lock is locked @@ -1745,7 +1744,6 @@ static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rx rxq->bd = NULL; rxq->rb_stts = NULL; } -EXPORT_SYMBOL(iwl3945_rx_queue_free); /* Convert linear signal-to-noise ratio into dB */ diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index db91db7..bebf735 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2558,6 +2558,11 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf) mutex_init(&priv->command_lock); spin_lock_init(&priv->stats_lock); + /* because rndis_command() sleeps we need to use workqueue */ + priv->workqueue = create_singlethread_workqueue("rndis_wlan"); + INIT_WORK(&priv->work, rndis_wext_worker); + INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats); + /* try bind rndis_host */ retval = generic_rndis_bind(usbdev, intf, FLAG_RNDIS_PHYM_WIRELESS); if (retval < 0) @@ -2603,16 +2608,17 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf) disassociate(usbdev, 1); netif_carrier_off(usbdev->net); - /* because rndis_command() sleeps we need to use workqueue */ - priv->workqueue = create_singlethread_workqueue("rndis_wlan"); - INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats); queue_delayed_work(priv->workqueue, &priv->stats_work, round_jiffies_relative(STATS_UPDATE_JIFFIES)); - INIT_WORK(&priv->work, rndis_wext_worker); return 0; fail: + cancel_delayed_work_sync(&priv->stats_work); + cancel_work_sync(&priv->work); + flush_workqueue(priv->workqueue); + destroy_workqueue(priv->workqueue); + kfree(priv); return retval; } diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h index 9718f61..edeff82 100644 --- a/drivers/net/wireless/rtl818x/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187.h @@ -120,6 +120,12 @@ struct rtl8187_priv { __le64 buf; struct sk_buff_head queue; } b_tx_status; /* This queue is used by both -b and non-b devices */ + struct mutex io_mutex; + union { + u8 bits8; + __le16 bits16; + __le32 bits32; + } *io_dmabuf; }; void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); @@ -129,10 +135,14 @@ static inline u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv, { u8 val; + mutex_lock(&priv->io_mutex); usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits8, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits8; + mutex_unlock(&priv->io_mutex); return val; } @@ -147,10 +157,14 @@ static inline u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv, { __le16 val; + mutex_lock(&priv->io_mutex); usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits16, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits16; + mutex_unlock(&priv->io_mutex); return le16_to_cpu(val); } @@ -165,10 +179,14 @@ static inline u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv, { __le32 val; + mutex_lock(&priv->io_mutex); usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits32, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits32; + mutex_unlock(&priv->io_mutex); return le32_to_cpu(val); } @@ -181,10 +199,15 @@ static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr) static inline void rtl818x_iowrite8_idx(struct rtl8187_priv *priv, u8 *addr, u8 val, u8 idx) { + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits8 = val; usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits8, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); } static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val) @@ -195,12 +218,15 @@ static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val) static inline void rtl818x_iowrite16_idx(struct rtl8187_priv *priv, __le16 *addr, u16 val, u8 idx) { - __le16 buf = cpu_to_le16(val); + mutex_lock(&priv->io_mutex); + priv->io_dmabuf->bits16 = cpu_to_le16(val); usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, &buf, sizeof(buf), - HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits16, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); } static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr, @@ -212,12 +238,15 @@ static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr, static inline void rtl818x_iowrite32_idx(struct rtl8187_priv *priv, __le32 *addr, u32 val, u8 idx) { - __le32 buf = cpu_to_le32(val); + mutex_lock(&priv->io_mutex); + priv->io_dmabuf->bits32 = cpu_to_le32(val); usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, &buf, sizeof(buf), - HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits32, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); } static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr, diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index fd81884..bac6cfb 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -1329,6 +1329,14 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, priv = dev->priv; priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B); + /* allocate "DMA aware" buffer for register accesses */ + priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL); + if (!priv->io_dmabuf) { + err = -ENOMEM; + goto err_free_dev; + } + mutex_init(&priv->io_mutex); + SET_IEEE80211_DEV(dev, &intf->dev); usb_set_intfdata(intf, dev); priv->udev = udev; @@ -1495,7 +1503,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, err = ieee80211_register_hw(dev); if (err) { printk(KERN_ERR "rtl8187: Cannot register device\n"); - goto err_free_dev; + goto err_free_dmabuf; } mutex_init(&priv->conf_mutex); skb_queue_head_init(&priv->b_tx_status.queue); @@ -1506,6 +1514,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, return 0; + err_free_dmabuf: + kfree(priv->io_dmabuf); err_free_dev: ieee80211_free_hw(dev); usb_set_intfdata(intf, NULL); @@ -1526,6 +1536,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf) priv = dev->priv; usb_reset_device(priv->udev); usb_put_dev(interface_to_usbdev(intf)); + kfree(priv->io_dmabuf); ieee80211_free_hw(dev); } diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c index 78df281..a098193 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c @@ -88,9 +88,15 @@ static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, __le16 data) rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80); udelay(10); + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits16 = data; usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - addr, 0x8225, &data, sizeof(data), HZ / 2); + addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data), + HZ / 2); + + mutex_unlock(&priv->io_mutex); rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); udelay(10); diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 001b328..a563fbe 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -59,6 +59,10 @@ #define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32)) #define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64)) +#ifndef PHYSICAL_PAGE_MASK +#define PHYSICAL_PAGE_MASK PAGE_MASK +#endif + /* global iommu list, set NULL for ignored DMAR units */ static struct intel_iommu **g_iommus; @@ -1216,7 +1220,7 @@ static void dmar_init_reserved_ranges(void) if (!r->flags || !(r->flags & IORESOURCE_MEM)) continue; addr = r->start; - addr &= PAGE_MASK; + addr &= PHYSICAL_PAGE_MASK; size = r->end - addr; size = PAGE_ALIGN(size); iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr), @@ -2173,7 +2177,8 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, * is not a big problem */ ret = domain_page_mapping(domain, start_paddr, - ((u64)paddr) & PAGE_MASK, size, prot); + ((u64)paddr) & PHYSICAL_PAGE_MASK, + size, prot); if (ret) goto error; @@ -2463,8 +2468,8 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne addr = page_to_phys(sg_page(sg)) + sg->offset; size = aligned_size((u64)addr, sg->length); ret = domain_page_mapping(domain, start_addr + offset, - ((u64)addr) & PAGE_MASK, - size, prot); + ((u64)addr) & PHYSICAL_PAGE_MASK, + size, prot); if (ret) { /* clear the page */ dma_pte_clear_range(domain, start_addr, diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 6f2e629..3627732 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -455,8 +455,6 @@ static int msix_capability_init(struct pci_dev *dev, entry->msi_attrib.default_irq = dev->irq; entry->msi_attrib.pos = pos; entry->mask_base = base; - entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); msix_mask_irq(entry, 1); list_add_tail(&entry->list, &dev->msi_list); @@ -493,6 +491,12 @@ static int msix_capability_init(struct pci_dev *dev, msix_set_enable(dev, 1); dev->msix_enabled = 1; + list_for_each_entry(entry, &dev->msi_list, list) { + int vector = entry->msi_attrib.entry_nr; + entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE + + PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); + } + return 0; } diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index c7ad68b..aa14482 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -95,6 +95,9 @@ struct aer_broadcast_data { static inline pci_ers_result_t merge_result(enum pci_ers_result orig, enum pci_ers_result new) { + if (new == PCI_ERS_RESULT_NONE) + return orig; + switch (orig) { case PCI_ERS_RESULT_CAN_RECOVER: case PCI_ERS_RESULT_RECOVERED: diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index b924e24..091ce70 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -200,7 +200,7 @@ static int slot_reset_iter(struct device *device, void *data) static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev) { - pci_ers_result_t status = PCI_ERS_RESULT_NONE; + pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED; int retval; /* If fatal, restore cfg space for possible link reset at upstream */ diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c index a6341e4..9c8c70c 100644 --- a/drivers/rtc/rtc-twl4030.c +++ b/drivers/rtc/rtc-twl4030.c @@ -495,9 +495,7 @@ static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) { irqstat = rtc_irq_bits; - /* REVISIT alarm may need to wake us from sleep */ - mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | - BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); return 0; } diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 616c60f..3ac27ee 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -97,9 +97,7 @@ static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun) ccw_device_set_online(adapter->ccw_device); zfcp_erp_wait(adapter); - wait_event(adapter->erp_done_wqh, - !(atomic_read(&unit->status) & - ZFCP_STATUS_UNIT_SCSI_WORK_PENDING)); + flush_work(&unit->scsi_work); down(&zfcp_data.config_sema); zfcp_unit_put(unit); @@ -279,6 +277,7 @@ struct zfcp_unit *zfcp_unit_enqueue(struct zfcp_port *port, u64 fcp_lun) atomic_set(&unit->refcount, 0); init_waitqueue_head(&unit->remove_wq); + INIT_WORK(&unit->scsi_work, zfcp_scsi_scan); unit->port = port; unit->fcp_lun = fcp_lun; @@ -525,6 +524,8 @@ int zfcp_adapter_enqueue(struct ccw_device *ccw_device) atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status); + zfcp_fc_nameserver_init(adapter); + if (!zfcp_adapter_scsi_register(adapter)) return 0; @@ -553,7 +554,6 @@ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter) cancel_work_sync(&adapter->scan_work); cancel_work_sync(&adapter->stat_work); - cancel_delayed_work_sync(&adapter->nsp.work); zfcp_adapter_scsi_unregister(adapter); sysfs_remove_group(&adapter->ccw_device->dev.kobj, &zfcp_sysfs_adapter_attrs); @@ -671,8 +671,7 @@ void zfcp_port_dequeue(struct zfcp_port *port) list_del(&port->list); write_unlock_irq(&zfcp_data.config_lock); if (port->rport) - fc_remote_port_delete(port->rport); - port->rport = NULL; + port->rport->dd_data = NULL; zfcp_adapter_put(port->adapter); sysfs_remove_group(&port->sysfs_device.kobj, &zfcp_sysfs_port_attrs); device_unregister(&port->sysfs_device); diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index cfb0dcb..733fe3b 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -108,7 +108,6 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device) /* initialize request counter */ BUG_ON(!zfcp_reqlist_isempty(adapter)); adapter->req_no = 0; - zfcp_fc_nameserver_init(adapter); zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL, ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c index 10cbfd1..8305c87 100644 --- a/drivers/s390/scsi/zfcp_cfdc.c +++ b/drivers/s390/scsi/zfcp_cfdc.c @@ -4,7 +4,7 @@ * Userspace interface for accessing the * Access Control Lists / Control File Data Channel * - * Copyright IBM Corporation 2008 + * Copyright IBM Corporation 2008, 2009 */ #define KMSG_COMPONENT "zfcp" @@ -197,6 +197,7 @@ static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command, retval = -ENXIO; goto free_buffer; } + zfcp_adapter_get(adapter); retval = zfcp_cfdc_sg_setup(data->command, fsf_cfdc->sg, data_user->control_file); diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index a031863..4c362a9 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -255,7 +255,6 @@ enum zfcp_wka_status { /* logical unit status */ #define ZFCP_STATUS_UNIT_SHARED 0x00000004 #define ZFCP_STATUS_UNIT_READONLY 0x00000008 -#define ZFCP_STATUS_UNIT_SCSI_WORK_PENDING 0x00000020 /* FSF request status (this does not have a common part) */ #define ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT 0x00000002 @@ -530,6 +529,7 @@ struct zfcp_unit { struct zfcp_erp_action erp_action; /* pending error recovery */ atomic_t erp_counter; struct zfcp_latencies latencies; + struct work_struct scsi_work; }; /* FSF request */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 631bdb1..fdc9b435 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -719,6 +719,7 @@ static void zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *act) zfcp_qdio_close(adapter); zfcp_fsf_req_dismiss_all(adapter); adapter->fsf_req_seq_no = 0; + zfcp_fc_wka_port_force_offline(&adapter->nsp); /* all ports and units are closed */ zfcp_erp_modify_adapter_status(adapter, "erascl1", NULL, ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR); @@ -1176,48 +1177,6 @@ static void zfcp_erp_action_dequeue(struct zfcp_erp_action *erp_action) } } -struct zfcp_erp_add_work { - struct zfcp_unit *unit; - struct work_struct work; -}; - -static void zfcp_erp_scsi_scan(struct work_struct *work) -{ - struct zfcp_erp_add_work *p = - container_of(work, struct zfcp_erp_add_work, work); - struct zfcp_unit *unit = p->unit; - struct fc_rport *rport = unit->port->rport; - - if (rport && rport->port_state == FC_PORTSTATE_ONLINE) - scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, - scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0); - atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); - zfcp_unit_put(unit); - wake_up(&unit->port->adapter->erp_done_wqh); - kfree(p); -} - -static void zfcp_erp_schedule_work(struct zfcp_unit *unit) -{ - struct zfcp_erp_add_work *p; - - p = kzalloc(sizeof(*p), GFP_KERNEL); - if (!p) { - dev_err(&unit->port->adapter->ccw_device->dev, - "Registering unit 0x%016Lx on port 0x%016Lx failed\n", - (unsigned long long)unit->fcp_lun, - (unsigned long long)unit->port->wwpn); - return; - } - - zfcp_unit_get(unit); - atomic_set_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); - INIT_WORK(&p->work, zfcp_erp_scsi_scan); - p->unit = unit; - if (!queue_work(zfcp_data.work_queue, &p->work)) - zfcp_unit_put(unit); -} - static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) { struct zfcp_adapter *adapter = act->adapter; @@ -1226,11 +1185,11 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) switch (act->action) { case ZFCP_ERP_ACTION_REOPEN_UNIT: - flush_work(&port->rport_work); if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) { - if (!(atomic_read(&unit->status) & - ZFCP_STATUS_UNIT_SCSI_WORK_PENDING)) - zfcp_erp_schedule_work(unit); + zfcp_unit_get(unit); + if (scsi_queue_work(unit->port->adapter->scsi_host, + &unit->scsi_work) <= 0) + zfcp_unit_put(unit); } zfcp_unit_put(unit); break; @@ -1352,6 +1311,11 @@ static int zfcp_erp_thread(void *data) while (!(atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_ERP_THREAD_KILL)) { + + zfcp_rec_dbf_event_thread_lock("erthrd1", adapter); + ignore = down_interruptible(&adapter->erp_ready_sem); + zfcp_rec_dbf_event_thread_lock("erthrd2", adapter); + write_lock_irqsave(&adapter->erp_lock, flags); next = adapter->erp_ready_head.next; write_unlock_irqrestore(&adapter->erp_lock, flags); @@ -1363,10 +1327,6 @@ static int zfcp_erp_thread(void *data) if (zfcp_erp_strategy(act) != ZFCP_ERP_DISMISSED) zfcp_erp_wakeup(adapter); } - - zfcp_rec_dbf_event_thread_lock("erthrd1", adapter); - ignore = down_interruptible(&adapter->erp_ready_sem); - zfcp_rec_dbf_event_thread_lock("erthrd2", adapter); } atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_UP, &adapter->status); diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index f6399ca..2e31b53 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -106,6 +106,7 @@ extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *); extern void zfcp_test_link(struct zfcp_port *); extern void zfcp_fc_link_test_work(struct work_struct *); extern void zfcp_fc_nameserver_init(struct zfcp_adapter *); +extern void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *); /* zfcp_fsf.c */ extern int zfcp_fsf_open_port(struct zfcp_erp_action *); @@ -158,6 +159,7 @@ extern void zfcp_scsi_rport_work(struct work_struct *); extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *); extern void zfcp_scsi_schedule_rport_block(struct zfcp_port *); extern void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *); +extern void zfcp_scsi_scan(struct work_struct *); /* zfcp_sysfs.c */ extern struct attribute_group zfcp_sysfs_unit_attrs; diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index e8d032b..19ae084 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -98,13 +98,6 @@ static void zfcp_wka_port_offline(struct work_struct *work) struct zfcp_wka_port *wka_port = container_of(dw, struct zfcp_wka_port, work); - /* Don't wait forvever. If the wka_port is too busy take it offline - through a new call later */ - if (!wait_event_timeout(wka_port->completion_wq, - atomic_read(&wka_port->refcount) == 0, - HZ >> 1)) - return; - mutex_lock(&wka_port->mutex); if ((atomic_read(&wka_port->refcount) != 0) || (wka_port->status != ZFCP_WKA_PORT_ONLINE)) @@ -142,6 +135,14 @@ void zfcp_fc_nameserver_init(struct zfcp_adapter *adapter) INIT_DELAYED_WORK(&wka_port->work, zfcp_wka_port_offline); } +void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *wka) +{ + cancel_delayed_work_sync(&wka->work); + mutex_lock(&wka->mutex); + wka->status = ZFCP_WKA_PORT_OFFLINE; + mutex_unlock(&wka->mutex); +} + static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, struct fcp_rscn_element *elem) { @@ -372,7 +373,8 @@ static void zfcp_fc_adisc_handler(unsigned long data) if (adisc->els.status) { /* request rejected or timed out */ - zfcp_erp_port_forced_reopen(port, 0, "fcadh_1", NULL); + zfcp_erp_port_forced_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, + "fcadh_1", NULL); goto out; } @@ -431,11 +433,6 @@ void zfcp_fc_link_test_work(struct work_struct *work) container_of(work, struct zfcp_port, test_link_work); int retval; - if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_UNBLOCKED)) { - zfcp_port_put(port); - return; /* port erp is running and will update rport status */ - } - zfcp_port_get(port); port->rport_task = RPORT_DEL; zfcp_scsi_rport_work(&port->rport_work); @@ -542,6 +539,9 @@ static void zfcp_validate_port(struct zfcp_port *port) { struct zfcp_adapter *adapter = port->adapter; + if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC)) + return; + atomic_clear_mask(ZFCP_STATUS_COMMON_NOESC, &port->status); if ((port->supported_classes != 0) || @@ -602,10 +602,8 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft, int max_entries) if (acc->wwpn == fc_host_port_name(adapter->scsi_host)) continue; port = zfcp_get_port_by_wwpn(adapter, acc->wwpn); - if (port) { - zfcp_port_get(port); + if (port) continue; - } port = zfcp_port_enqueue(adapter, acc->wwpn, ZFCP_STATUS_COMMON_NOESC, d_id); @@ -637,7 +635,8 @@ int zfcp_scan_ports(struct zfcp_adapter *adapter) max_entries = chain ? ZFCP_GPN_FT_MAX_ENTRIES : ZFCP_GPN_FT_ENTRIES; max_bytes = chain ? ZFCP_GPN_FT_MAX_SIZE : ZFCP_CT_SIZE_ONE_PAGE; - if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT) + if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT && + fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV) return 0; ret = zfcp_wka_port_get(&adapter->nsp); diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index b29f312..74dee32 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -172,12 +172,16 @@ static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, char *id, struct fsf_link_down_info *link_down) { struct zfcp_adapter *adapter = req->adapter; + unsigned long flags; if (atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED) return; atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status); + + read_lock_irqsave(&zfcp_data.config_lock, flags); zfcp_scsi_schedule_rports_block(adapter); + read_unlock_irqrestore(&zfcp_data.config_lock, flags); if (!link_down) goto out; @@ -645,30 +649,30 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req) } } -static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter) - __releases(&adapter->req_q_lock) - __acquires(&adapter->req_q_lock) +static int zfcp_fsf_sbal_check(struct zfcp_adapter *adapter) { struct zfcp_qdio_queue *req_q = &adapter->req_q; - long ret; - if (atomic_read(&req_q->count) <= -REQUEST_LIST_SIZE) - return -EIO; - if (atomic_read(&req_q->count) > 0) - return 0; + spin_lock_bh(&adapter->req_q_lock); + if (atomic_read(&req_q->count)) + return 1; + spin_unlock_bh(&adapter->req_q_lock); + return 0; +} + +static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter) +{ + long ret; - atomic_dec(&req_q->count); spin_unlock_bh(&adapter->req_q_lock); ret = wait_event_interruptible_timeout(adapter->request_wq, - atomic_read(&req_q->count) >= 0, - 5 * HZ); - spin_lock_bh(&adapter->req_q_lock); - atomic_inc(&req_q->count); - + zfcp_fsf_sbal_check(adapter), 5 * HZ); if (ret > 0) return 0; if (!ret) atomic_inc(&adapter->qdio_outb_full); + + spin_lock_bh(&adapter->req_q_lock); return -EIO; } @@ -766,8 +770,9 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter, static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; - unsigned long flags; - int idx; + unsigned long flags; + int idx; + int with_qtcb = (req->qtcb != NULL); /* put allocated FSF request into hash table */ spin_lock_irqsave(&adapter->req_list_lock, flags); @@ -789,7 +794,7 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) } /* Don't increase for unsolicited status */ - if (req->qtcb) + if (with_qtcb) adapter->fsf_req_seq_no++; adapter->req_no++; @@ -1253,13 +1258,13 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, spin_lock_bh(&adapter->req_q_lock); if (zfcp_fsf_req_sbal_get(adapter)) - goto out; + goto out_unlock; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA, 0, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); - goto out; + goto out_unlock; } sbale = zfcp_qdio_sbale_req(req); @@ -1278,14 +1283,16 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); -out: spin_unlock_bh(&adapter->req_q_lock); if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); zfcp_fsf_req_free(req); + return retval; +out_unlock: + spin_unlock_bh(&adapter->req_q_lock); return retval; } @@ -1352,13 +1359,13 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, spin_lock_bh(&adapter->req_q_lock); if (zfcp_fsf_req_sbal_get(adapter)) - goto out; + goto out_unlock; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); - goto out; + goto out_unlock; } if (data) @@ -1371,14 +1378,18 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, req->handler = zfcp_fsf_exchange_port_data_handler; zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); -out: spin_unlock_bh(&adapter->req_q_lock); + if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); zfcp_fsf_req_free(req); return retval; + +out_unlock: + spin_unlock_bh(&adapter->req_q_lock); + return retval; } static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req) @@ -2472,8 +2483,6 @@ out: static void zfcp_fsf_control_file_handler(struct zfcp_fsf_req *req) { - if (req->qtcb->header.fsf_status != FSF_GOOD) - req->status |= ZFCP_STATUS_FSFREQ_ERROR; } /** diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 58201e1..e8fbeae 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -171,7 +171,7 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt) write_unlock_irqrestore(&adapter->abort_lock, flags); zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL, old_req_id); - return SUCCESS; + return FAILED; /* completion could be in progress */ } old_req->data = NULL; @@ -486,10 +486,12 @@ static void zfcp_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout) */ static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport) { - struct zfcp_port *port = rport->dd_data; + struct zfcp_port *port; write_lock_irq(&zfcp_data.config_lock); - port->rport = NULL; + port = rport->dd_data; + if (port) + port->rport = NULL; write_unlock_irq(&zfcp_data.config_lock); } @@ -503,9 +505,18 @@ static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport) */ static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport) { - struct zfcp_port *port = rport->dd_data; + struct zfcp_port *port; + + write_lock_irq(&zfcp_data.config_lock); + port = rport->dd_data; + if (port) + zfcp_port_get(port); + write_unlock_irq(&zfcp_data.config_lock); - zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL); + if (port) { + zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL); + zfcp_port_put(port); + } } static void zfcp_scsi_rport_register(struct zfcp_port *port) @@ -534,8 +545,10 @@ static void zfcp_scsi_rport_register(struct zfcp_port *port) static void zfcp_scsi_rport_block(struct zfcp_port *port) { - if (port->rport) - fc_remote_port_delete(port->rport); + struct fc_rport *rport = port->rport; + + if (rport) + fc_remote_port_delete(rport); } void zfcp_scsi_schedule_rport_register(struct zfcp_port *port) @@ -583,6 +596,23 @@ void zfcp_scsi_rport_work(struct work_struct *work) } +void zfcp_scsi_scan(struct work_struct *work) +{ + struct zfcp_unit *unit = container_of(work, struct zfcp_unit, + scsi_work); + struct fc_rport *rport; + + flush_work(&unit->port->rport_work); + rport = unit->port->rport; + + if (rport && rport->port_state == FC_PORTSTATE_ONLINE) + scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, + scsilun_to_int((struct scsi_lun *) + &unit->fcp_lun), 0); + + zfcp_unit_put(unit); +} + struct fc_function_template zfcp_transport_functions = { .show_starget_port_id = 1, .show_starget_port_name = 1, diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c index 9a3b8e2..3e51e64 100644 --- a/drivers/s390/scsi/zfcp_sysfs.c +++ b/drivers/s390/scsi/zfcp_sysfs.c @@ -254,12 +254,21 @@ static ssize_t zfcp_sysfs_unit_remove_store(struct device *dev, write_lock_irq(&zfcp_data.config_lock); unit = zfcp_get_unit_by_lun(port, fcp_lun); - if (unit && (atomic_read(&unit->refcount) == 0)) { - zfcp_unit_get(unit); - atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status); - list_move(&unit->list, &unit_remove_lh); - } else - unit = NULL; + if (unit) { + write_unlock_irq(&zfcp_data.config_lock); + /* wait for possible timeout during SCSI probe */ + flush_work(&unit->scsi_work); + write_lock_irq(&zfcp_data.config_lock); + + if (atomic_read(&unit->refcount) == 0) { + zfcp_unit_get(unit); + atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, + &unit->status); + list_move(&unit->list, &unit_remove_lh); + } else { + unit = NULL; + } + } write_unlock_irq(&zfcp_data.config_lock); diff --git a/drivers/scsi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgb3i/cxgb3i.h index d362860..59b0958 100644 --- a/drivers/scsi/cxgb3i/cxgb3i.h +++ b/drivers/scsi/cxgb3i/cxgb3i.h @@ -34,7 +34,7 @@ #include "cxgb3i_offload.h" #include "cxgb3i_ddp.h" -#define CXGB3I_SCSI_QDEPTH_DFLT 128 +#define CXGB3I_SCSI_HOST_QDEPTH 1024 #define CXGB3I_MAX_TARGET CXGB3I_MAX_CONN #define CXGB3I_MAX_LUN 512 #define ISCSI_PDU_NONPAYLOAD_MAX \ diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c index d06a661..99c9125 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_ddp.c +++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c @@ -120,20 +120,26 @@ static void clear_ddp_map(struct cxgb3i_ddp_info *ddp, unsigned int tag, } static inline int ddp_find_unused_entries(struct cxgb3i_ddp_info *ddp, - int start, int max, int count, + unsigned int start, unsigned int max, + unsigned int count, struct cxgb3i_gather_list *gl) { - unsigned int i, j; + unsigned int i, j, k; + /* not enough entries */ + if ((max - start) < count) + return -EBUSY; + + max -= count; spin_lock(&ddp->map_lock); - for (i = start; i <= max;) { - for (j = 0; j < count; j++) { - if (ddp->gl_map[i + j]) + for (i = start; i < max;) { + for (j = 0, k = i; j < count; j++, k++) { + if (ddp->gl_map[k]) break; } if (j == count) { - for (j = 0; j < count; j++) - ddp->gl_map[i + j] = gl; + for (j = 0, k = i; j < count; j++, k++) + ddp->gl_map[k] = gl; spin_unlock(&ddp->map_lock); return i; } @@ -354,7 +360,7 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev *tdev, unsigned int tid, struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi; struct pagepod_hdr hdr; unsigned int npods; - int idx = -1, idx_max; + int idx = -1; int err = -ENOMEM; u32 sw_tag = *tagp; u32 tag; @@ -367,17 +373,17 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev *tdev, unsigned int tid, } npods = (gl->nelem + PPOD_PAGES_MAX - 1) >> PPOD_PAGES_SHIFT; - idx_max = ddp->nppods - npods + 1; if (ddp->idx_last == ddp->nppods) - idx = ddp_find_unused_entries(ddp, 0, idx_max, npods, gl); + idx = ddp_find_unused_entries(ddp, 0, ddp->nppods, npods, gl); else { idx = ddp_find_unused_entries(ddp, ddp->idx_last + 1, - idx_max, npods, gl); - if (idx < 0 && ddp->idx_last >= npods) + ddp->nppods, npods, gl); + if (idx < 0 && ddp->idx_last >= npods) { idx = ddp_find_unused_entries(ddp, 0, - ddp->idx_last - npods + 1, + min(ddp->idx_last + npods, ddp->nppods), npods, gl); + } } if (idx < 0) { ddp_log_debug("xferlen %u, gl %u, npods %u NO DDP.\n", diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index fff8e43..9212400 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -876,13 +876,14 @@ static struct scsi_host_template cxgb3i_host_template = { .proc_name = "cxgb3i", .queuecommand = iscsi_queuecommand, .change_queue_depth = iscsi_change_queue_depth, - .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1, + .can_queue = CXGB3I_SCSI_HOST_QDEPTH, .sg_tablesize = SG_ALL, .max_sectors = 0xFFFF, - .cmd_per_lun = CXGB3I_SCSI_QDEPTH_DFLT, + .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler = iscsi_eh_device_reset, .eh_target_reset_handler = iscsi_eh_target_reset, + .target_alloc = iscsi_target_alloc, .use_clustering = DISABLE_CLUSTERING, .this_id = -1, }; diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index 4d8654c..e11c9c1 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -1737,7 +1737,7 @@ int cxgb3i_c3cn_send_pdus(struct s3_conn *c3cn, struct sk_buff *skb) c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n", c3cn, c3cn->write_seq, c3cn->snd_una, cxgb3_snd_win); - err = -EAGAIN; + err = -ENOBUFS; goto out_err; } @@ -1775,6 +1775,8 @@ done: out_err: if (copied == 0 && err == -EPIPE) copied = c3cn->err ? c3cn->err : -EPIPE; + else + copied = err; goto done; } diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c index 7eebc9a..7091050 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c +++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c @@ -400,17 +400,18 @@ int cxgb3i_conn_xmit_pdu(struct iscsi_task *task) return 0; } - if (err < 0 && err != -EAGAIN) { - kfree_skb(skb); - cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n", - task->itt, skb, skb->len, skb->data_len, err); - iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err); - iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED); + if (err == -EAGAIN || err == -ENOBUFS) { + /* reset skb to send when we are called again */ + tdata->skb = skb; return err; } - /* reset skb to send when we are called again */ - tdata->skb = skb; - return -EAGAIN; + + kfree_skb(skb); + cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n", + task->itt, skb, skb->len, skb->data_len, err); + iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err); + iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED); + return err; } int cxgb3i_pdu_init(void) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 94e1e31..03e1926 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -57,7 +57,7 @@ DEFINE_RWLOCK(fcoe_hostlist_lock); DEFINE_TIMER(fcoe_timer, NULL, 0, 0); DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu); -/* Function Prototyes */ +/* Function Prototypes */ static int fcoe_reset(struct Scsi_Host *shost); static int fcoe_xmit(struct fc_lport *, struct fc_frame *); static int fcoe_rcv(struct sk_buff *, struct net_device *, @@ -138,7 +138,6 @@ static struct scsi_host_template fcoe_shost_template = { /** * fcoe_lport_config() - sets up the fc_lport * @lp: ptr to the fc_lport - * @shost: ptr to the parent scsi host * * Returns: 0 for success */ @@ -256,6 +255,7 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev) rtnl_lock(); memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN); dev_unicast_add(fc->real_dev, flogi_maddr, ETH_ALEN); + dev_mc_add(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0); rtnl_unlock(); /* @@ -380,7 +380,7 @@ static int fcoe_if_destroy(struct net_device *netdev) dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0); rtnl_unlock(); - /* Free the per-CPU revieve threads */ + /* Free the per-CPU receive threads */ fcoe_percpu_clean(lp); /* Free existing skbs */ @@ -720,7 +720,7 @@ static void fcoe_percpu_thread_destroy(unsigned int cpu) } #else /* - * This a non-SMP scenario where the singluar Rx thread is + * This a non-SMP scenario where the singular Rx thread is * being removed. Free all skbs and stop the thread. */ spin_lock_bh(&p->fcoe_rx_list.lock); @@ -777,7 +777,7 @@ static struct notifier_block fcoe_cpu_notifier = { * @skb: the receive skb * @dev: associated net device * @ptype: context - * @odldev: last device + * @olddev: last device * * this function will receive the packet and build fc frame and pass it up * @@ -884,7 +884,6 @@ err2: kfree_skb(skb); return -1; } -EXPORT_SYMBOL_GPL(fcoe_rcv); /** * fcoe_start_io() - pass to netdev to start xmit for fcoe @@ -905,7 +904,7 @@ static inline int fcoe_start_io(struct sk_buff *skb) } /** - * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof + * fcoe_get_paged_crc_eof() - in case we need to alloc a page for crc_eof * @skb: the skb to be xmitted * @tlen: total len * @@ -947,7 +946,7 @@ static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen) /** * fcoe_fc_crc() - calculates FC CRC in this fcoe skb - * @fp: the fc_frame containg data to be checksummed + * @fp: the fc_frame containing data to be checksummed * * This uses crc32() to calculate the crc for fc frame * Return : 32 bit crc @@ -1011,7 +1010,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) wlen = skb->len / FCOE_WORD_TO_BYTE; if (!lp->link_up) { - kfree(skb); + kfree_skb(skb); return 0; } @@ -1062,7 +1061,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) cp = NULL; } - /* adjust skb netowrk/transport offsets to match mac/fcoe/fc */ + /* adjust skb network/transport offsets to match mac/fcoe/fc */ skb_push(skb, elen + hlen); skb_reset_mac_header(skb); skb_reset_network_header(skb); @@ -1123,7 +1122,6 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) return 0; } -EXPORT_SYMBOL_GPL(fcoe_xmit); /** * fcoe_percpu_receive_thread() - recv thread per cpu @@ -1296,17 +1294,16 @@ void fcoe_watchdog(ulong vp) /** - * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue - * @lp: the fc_port for this skb - * @skb: the associated skb to be xmitted + * fcoe_check_wait_queue() - attempt to clear the transmit backlog + * @lp: the fc_lport * * This empties the wait_queue, dequeue the head of the wait_queue queue * and calls fcoe_start_io() for each packet, if all skb have been * transmitted, return qlen or -1 if a error occurs, then restore - * wait_queue and try again later. + * wait_queue and try again later. * * The wait_queue is used when the skb transmit fails. skb will go - * in the wait_queue which will be emptied by the time function OR + * in the wait_queue which will be emptied by the timer function or * by the next skb transmit. * * Returns: 0 for success @@ -1355,10 +1352,6 @@ out: */ static void fcoe_dev_setup() { - /* - * here setup a interface specific wd time to - * monitor the link state - */ register_netdevice_notifier(&fcoe_notifier); } @@ -1437,10 +1430,9 @@ out: /** * fcoe_if_to_netdev() - parse a name buffer to get netdev - * @ifname: fixed array for output parsed ifname * @buffer: incoming buffer to be copied * - * Returns: NULL or ptr to netdeive + * Returns: NULL or ptr to net_device */ static struct net_device *fcoe_if_to_netdev(const char *buffer) { @@ -1458,7 +1450,7 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer) } /** - * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev + * fcoe_netdev_to_module_owner() - finds out the driver module of the netdev * @netdev: the target netdev * * Returns: ptr to the struct module, NULL for failure @@ -1488,7 +1480,7 @@ fcoe_netdev_to_module_owner(const struct net_device *netdev) * Holds the Ethernet driver module by try_module_get() for * the corresponding netdev. * - * Returns: 0 for succsss + * Returns: 0 for success */ static int fcoe_ethdrv_get(const struct net_device *netdev) { @@ -1510,7 +1502,7 @@ static int fcoe_ethdrv_get(const struct net_device *netdev) * Releases the Ethernet driver module by module_put for * the corresponding netdev. * - * Returns: 0 for succsss + * Returns: 0 for success */ static int fcoe_ethdrv_put(const struct net_device *netdev) { @@ -1528,7 +1520,7 @@ static int fcoe_ethdrv_put(const struct net_device *netdev) /** * fcoe_destroy() - handles the destroy from sysfs - * @buffer: expcted to be a eth if name + * @buffer: expected to be an eth if name * @kp: associated kernel param * * Returns: 0 for success @@ -1565,7 +1557,7 @@ out_nodev: /** * fcoe_create() - Handles the create call from sysfs - * @buffer: expcted to be a eth if name + * @buffer: expected to be an eth if name * @kp: associated kernel param * * Returns: 0 for success @@ -1652,7 +1644,6 @@ int fcoe_link_ok(struct fc_lport *lp) return rc; } -EXPORT_SYMBOL_GPL(fcoe_link_ok); /** * fcoe_percpu_clean() - Clear the pending skbs for an lport @@ -1684,7 +1675,6 @@ void fcoe_percpu_clean(struct fc_lport *lp) spin_unlock_bh(&pp->fcoe_rx_list.lock); } } -EXPORT_SYMBOL_GPL(fcoe_percpu_clean); /** * fcoe_clean_pending_queue() - Dequeue a skb and free it @@ -1705,7 +1695,6 @@ void fcoe_clean_pending_queue(struct fc_lport *lp) } spin_unlock_bh(&fc->fcoe_pending_queue.lock); } -EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue); /** * fcoe_reset() - Resets the fcoe @@ -1719,11 +1708,10 @@ int fcoe_reset(struct Scsi_Host *shost) fc_lport_reset(lport); return 0; } -EXPORT_SYMBOL_GPL(fcoe_reset); /** * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device - * @device: this is currently ptr to net_device + * @dev: this is currently ptr to net_device * * Returns: NULL or the located fcoe_softc */ @@ -1757,11 +1745,10 @@ struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev) return (fc) ? fc->ctlr.lp : NULL; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup); /** * fcoe_hostlist_add() - Add a lport to lports list - * @lp: ptr to the fc_lport to badded + * @lp: ptr to the fc_lport to be added * * Returns: 0 for success */ @@ -1778,11 +1765,10 @@ int fcoe_hostlist_add(const struct fc_lport *lp) } return 0; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_add); /** * fcoe_hostlist_remove() - remove a lport from lports list - * @lp: ptr to the fc_lport to badded + * @lp: ptr to the fc_lport to be removed * * Returns: 0 for success */ @@ -1798,7 +1784,6 @@ int fcoe_hostlist_remove(const struct fc_lport *lp) return 0; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_remove); /** * fcoe_init() - fcoe module loading initialization diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index f410f4a..62ba0f3 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -122,7 +122,7 @@ static void fcoe_ctlr_reset_fcfs(struct fcoe_ctlr *fip) } /** - * fcoe_ctrl_destroy() - Disable and tear-down the FCoE controller. + * fcoe_ctlr_destroy() - Disable and tear-down the FCoE controller. * @fip: FCoE controller. * * This is called by FCoE drivers before freeing the &fcoe_ctlr. diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index c09d775..dd689de 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -3654,6 +3654,7 @@ static int ipr_slave_configure(struct scsi_device *sdev) { struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata; struct ipr_resource_entry *res; + struct ata_port *ap = NULL; unsigned long lock_flags = 0; spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); @@ -3672,12 +3673,16 @@ static int ipr_slave_configure(struct scsi_device *sdev) } if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res)) sdev->allow_restart = 1; - if (ipr_is_gata(res) && res->sata_port) { + if (ipr_is_gata(res) && res->sata_port) + ap = res->sata_port->ap; + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + + if (ap) { scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN); - ata_sas_slave_configure(sdev, res->sata_port->ap); - } else { + ata_sas_slave_configure(sdev, ap); + } else scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun); - } + return 0; } spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); return 0; diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index b3e5e08..b7c092d6 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -463,7 +463,7 @@ static int iscsi_sw_tcp_pdu_init(struct iscsi_task *task, } if (err) { - iscsi_conn_failure(conn, err); + /* got invalid offset/len */ return -EIO; } return 0; @@ -851,6 +851,7 @@ static struct scsi_host_template iscsi_sw_tcp_sht = { .use_clustering = DISABLE_CLUSTERING, .slave_alloc = iscsi_sw_tcp_slave_alloc, .slave_configure = iscsi_sw_tcp_slave_configure, + .target_alloc = iscsi_target_alloc, .proc_name = "iscsi_tcp", .this_id = -1, }; diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index e57556ea..4c880656 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -113,6 +113,11 @@ void fc_disc_stop_rports(struct fc_disc *disc) lport->tt.rport_logoff(rport); } + list_for_each_entry_safe(rdata, next, &disc->rogue_rports, peers) { + rport = PRIV_TO_RPORT(rdata); + lport->tt.rport_logoff(rport); + } + mutex_unlock(&disc->disc_mutex); } @@ -131,23 +136,32 @@ static void fc_disc_rport_callback(struct fc_lport *lport, { struct fc_rport_libfc_priv *rdata = rport->dd_data; struct fc_disc *disc = &lport->disc; - int found = 0; FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event, rport->port_id); - if (event == RPORT_EV_CREATED) { + switch (event) { + case RPORT_EV_CREATED: if (disc) { - found = 1; mutex_lock(&disc->disc_mutex); list_add_tail(&rdata->peers, &disc->rports); mutex_unlock(&disc->disc_mutex); } + break; + case RPORT_EV_LOGO: + case RPORT_EV_FAILED: + case RPORT_EV_STOP: + mutex_lock(&disc->disc_mutex); + mutex_lock(&rdata->rp_mutex); + if (rdata->trans_state == FC_PORTSTATE_ROGUE) + list_del(&rdata->peers); + mutex_unlock(&rdata->rp_mutex); + mutex_unlock(&disc->disc_mutex); + break; + default: + break; } - if (!found) - FC_DEBUG_DISC("The rport (%6x) is not maintained " - "by the discovery layer\n", rport->port_id); } /** @@ -439,6 +453,7 @@ static int fc_disc_new_target(struct fc_disc *disc, rdata = rport->dd_data; rdata->ops = &fc_disc_rport_ops; rdata->rp_state = RPORT_ST_INIT; + list_add_tail(&rdata->peers, &disc->rogue_rports); lport->tt.rport_login(rport); } } @@ -461,21 +476,29 @@ static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport) /** * fc_disc_done() - Discovery has been completed * @disc: FC discovery context + * Locking Note: This function expects that the disc mutex is locked before + * it is called. The discovery callback is then made with the lock released, + * and the lock is re-taken before returning from this function */ static void fc_disc_done(struct fc_disc *disc) { struct fc_lport *lport = disc->lport; + enum fc_disc_event event; FC_DEBUG_DISC("Discovery complete for port (%6x)\n", fc_host_port_id(lport->host)); - disc->disc_callback(lport, disc->event); + event = disc->event; disc->event = DISC_EV_NONE; if (disc->requested) fc_disc_gpn_ft_req(disc); else disc->pending = 0; + + mutex_unlock(&disc->disc_mutex); + disc->disc_callback(lport, event); + mutex_lock(&disc->disc_mutex); } /** @@ -622,6 +645,8 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len) rdata = rport->dd_data; rdata->ops = &fc_disc_rport_ops; rdata->local_port = lport; + list_add_tail(&rdata->peers, + &disc->rogue_rports); lport->tt.rport_login(rport); } else FC_DBG("Failed to allocate memory for " @@ -681,8 +706,8 @@ static void fc_disc_timeout(struct work_struct *work) * @fp: response frame * @lp_arg: Fibre Channel host port instance * - * Locking Note: This function expects that the disc_mutex is locked - * before it is called. + * Locking Note: This function is called without disc mutex held, and + * should do all its processing with the mutex held */ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, void *disc_arg) @@ -695,11 +720,13 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, unsigned int len; int error; + mutex_lock(&disc->disc_mutex); FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n", fc_host_port_id(disc->lport->host)); if (IS_ERR(fp)) { fc_disc_error(disc, fp); + mutex_unlock(&disc->disc_mutex); return; } @@ -744,6 +771,8 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, disc->seq_count++; } fc_frame_free(fp); + + mutex_unlock(&disc->disc_mutex); } /** @@ -757,7 +786,6 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp) { struct fc_lport *lport; - struct fc_rport *rport; struct fc_rport *new_rport; struct fc_rport_libfc_priv *rdata; @@ -766,15 +794,12 @@ static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp) if (dp->ids.port_id == fc_host_port_id(lport->host)) goto out; - rport = lport->tt.rport_lookup(lport, dp->ids.port_id); - if (rport) - fc_disc_del_target(disc, rport); - new_rport = lport->tt.rport_create(dp); if (new_rport) { rdata = new_rport->dd_data; rdata->ops = &fc_disc_rport_ops; kfree(dp); + list_add_tail(&rdata->peers, &disc->rogue_rports); lport->tt.rport_login(new_rport); } return; @@ -836,6 +861,7 @@ int fc_disc_init(struct fc_lport *lport) INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout); mutex_init(&disc->disc_mutex); INIT_LIST_HEAD(&disc->rports); + INIT_LIST_HEAD(&disc->rogue_rports); disc->lport = lport; disc->delay = FC_DISC_DELAY; diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c index dd47fe6..5878b34 100644 --- a/drivers/scsi/libfc/fc_elsct.c +++ b/drivers/scsi/libfc/fc_elsct.c @@ -41,7 +41,7 @@ static struct fc_seq *fc_elsct_send(struct fc_lport *lport, void *arg, u32 timer_msec) { enum fc_rctl r_ctl; - u32 did; + u32 did = FC_FID_NONE; enum fc_fh_type fh_type; int rc; diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index f555ae9..521f996 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -713,7 +713,7 @@ done: static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg) { struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; - struct fc_lport *lp; + struct fc_lport *lport = fsp->lp; struct fc_frame_header *fh; struct fcp_txrdy *dd; u8 r_ctl; @@ -724,9 +724,8 @@ static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg) fh = fc_frame_header_get(fp); r_ctl = fh->fh_r_ctl; - lp = fsp->lp; - if (!(lp->state & LPORT_ST_READY)) + if (!(lport->state & LPORT_ST_READY)) goto out; if (fc_fcp_lock_pkt(fsp)) goto out; @@ -779,7 +778,7 @@ errout: if (IS_ERR(fp)) fc_fcp_error(fsp, fp); else if (rc == -ENOMEM) - fc_fcp_reduce_can_queue(lp); + fc_fcp_reduce_can_queue(lport); } static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index b8178ef..e0c2477 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -618,6 +618,11 @@ int fc_fabric_logoff(struct fc_lport *lport) { lport->tt.disc_stop_final(lport); mutex_lock(&lport->lp_mutex); + if (lport->dns_rp) + lport->tt.rport_logoff(lport->dns_rp); + mutex_unlock(&lport->lp_mutex); + lport->tt.rport_flush_queue(); + mutex_lock(&lport->lp_mutex); fc_lport_enter_logo(lport); mutex_unlock(&lport->lp_mutex); cancel_delayed_work_sync(&lport->retry_work); @@ -639,7 +644,12 @@ EXPORT_SYMBOL(fc_fabric_logoff); */ int fc_lport_destroy(struct fc_lport *lport) { + mutex_lock(&lport->lp_mutex); + lport->state = LPORT_ST_NONE; + lport->link_up = 0; lport->tt.frame_send = fc_frame_drop; + mutex_unlock(&lport->lp_mutex); + lport->tt.fcp_abort_io(lport); lport->tt.exch_mgr_reset(lport, 0, 0); return 0; @@ -1032,17 +1042,19 @@ static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RFT_ID response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_RFT_ID) { FC_DBG("Received a RFT_ID response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); @@ -1084,17 +1096,19 @@ static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RPN_ID response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_RPN_ID) { FC_DBG("Received a RPN_ID response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); if (fh && ct && fh->fh_type == FC_TYPE_CT && @@ -1134,17 +1148,19 @@ static void fc_lport_scr_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a SCR response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_SCR) { FC_DBG("Received a SCR response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_ready(lport); @@ -1360,17 +1376,19 @@ static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a LOGO response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_LOGO) { FC_DBG("Received a LOGO response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_reset(lport); @@ -1400,10 +1418,6 @@ static void fc_lport_enter_logo(struct fc_lport *lport) fc_lport_state_enter(lport, LPORT_ST_LOGO); - /* DNS session should be closed so we can release it here */ - if (lport->dns_rp) - lport->tt.rport_logoff(lport->dns_rp); - fp = fc_frame_alloc(lport, sizeof(*logo)); if (!fp) { fc_lport_error(lport, fp); @@ -1444,17 +1458,19 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a FLOGI response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_FLOGI) { FC_DBG("Received a FLOGI response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); did = ntoh24(fh->fh_d_id); if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) { diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 0472bb7..747d73c 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -267,6 +267,10 @@ static void fc_rport_work(struct work_struct *work) "(%6x).\n", ids.port_id); event = RPORT_EV_FAILED; } + if (rport->port_id != FC_FID_DIR_SERV) + if (rport_ops->event_callback) + rport_ops->event_callback(lport, rport, + RPORT_EV_FAILED); put_device(&rport->dev); rport = new_rport; rdata = new_rport->dd_data; @@ -325,11 +329,20 @@ int fc_rport_login(struct fc_rport *rport) int fc_rport_logoff(struct fc_rport *rport) { struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; mutex_lock(&rdata->rp_mutex); FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id); + if (rdata->rp_state == RPORT_ST_NONE) { + FC_DEBUG_RPORT("(%6x): Port (%6x) in NONE state," + " not removing", fc_host_port_id(lport->host), + rport->port_id); + mutex_unlock(&rdata->rp_mutex); + goto out; + } + fc_rport_enter_logo(rport); /* @@ -349,6 +362,7 @@ int fc_rport_logoff(struct fc_rport *rport) mutex_unlock(&rdata->rp_mutex); +out: return 0; } @@ -430,6 +444,7 @@ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp) case RPORT_ST_PRLI: case RPORT_ST_LOGO: rdata->event = RPORT_EV_FAILED; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); break; @@ -494,7 +509,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, struct fc_rport *rport = rp_arg; struct fc_rport_libfc_priv *rdata = rport->dd_data; struct fc_lport *lport = rdata->local_port; - struct fc_els_flogi *plp; + struct fc_els_flogi *plp = NULL; unsigned int tov; u16 csp_seq; u16 cssp_seq; @@ -505,17 +520,19 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_PLOGI) { FC_DBG("Received a PLOGI response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC && (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { @@ -614,17 +631,19 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_PRLI) { FC_DBG("Received a PRLI response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { pp = fc_frame_payload_get(fp, sizeof(*pp)); @@ -646,6 +665,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, } else { FC_DBG("Bad ELS response\n"); rdata->event = RPORT_EV_FAILED; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); } @@ -678,23 +698,26 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_LOGO) { FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { fc_rport_enter_rtv(rport); } else { FC_DBG("Bad ELS response\n"); rdata->event = RPORT_EV_LOGO; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); } @@ -764,17 +787,19 @@ static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_RTV) { FC_DBG("Received a RTV response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { struct fc_els_rtv_acc *rtv; @@ -1007,6 +1032,8 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport, default: FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected " "state %d\n", sid, rdata->rp_state); + fc_frame_free(fp); + return; break; } @@ -1098,6 +1125,8 @@ static void fc_rport_recv_prli_req(struct fc_rport *rport, reason = ELS_RJT_NONE; break; default: + fc_frame_free(rx_fp); + return; break; } len = fr_len(rx_fp) - sizeof(*fh); @@ -1227,6 +1256,11 @@ static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp, "while in state %s\n", ntoh24(fh->fh_s_id), fc_rport_state(rport)); + if (rdata->rp_state == RPORT_ST_NONE) { + fc_frame_free(fp); + return; + } + rjt_data.fp = NULL; rjt_data.reason = ELS_RJT_UNAB; rjt_data.explan = ELS_EXPL_NONE; @@ -1256,7 +1290,13 @@ static void fc_rport_recv_logo_req(struct fc_rport *rport, struct fc_seq *sp, "while in state %s\n", ntoh24(fh->fh_s_id), fc_rport_state(rport)); + if (rdata->rp_state == RPORT_ST_NONE) { + fc_frame_free(fp); + return; + } + rdata->event = RPORT_EV_LOGO; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL); diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 6896283..e72b4ad 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1463,6 +1463,16 @@ int iscsi_change_queue_depth(struct scsi_device *sdev, int depth) } EXPORT_SYMBOL_GPL(iscsi_change_queue_depth); +int iscsi_target_alloc(struct scsi_target *starget) +{ + struct iscsi_cls_session *cls_session = starget_to_session(starget); + struct iscsi_session *session = cls_session->dd_data; + + starget->can_queue = session->scsi_cmds_max; + return 0; +} +EXPORT_SYMBOL_GPL(iscsi_target_alloc); + void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session) { struct iscsi_session *session = cls_session->dd_data; diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 91f8ce4..b579ca9 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -1036,8 +1036,11 @@ flush: rc = conn->session->tt->init_pdu(task, r2t->data_offset + r2t->sent, r2t->data_count); - if (rc) + if (rc) { + iscsi_conn_failure(conn, ISCSI_ERR_XMIT_FAILED); return rc; + } + r2t->sent += r2t->data_count; goto flush; } diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index dcba267..1105f9a 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -443,6 +443,7 @@ struct lpfc_hba { uint32_t hba_flag; /* hba generic flags */ #define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */ +#define DEFER_ERATT 0x4 /* Deferred error attention in progress */ struct lpfc_dmabuf slim2p; MAILBOX_t *mbox; @@ -723,4 +724,3 @@ lpfc_sli_read_hs(struct lpfc_hba *phba) return; } - diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 40cf0f4..c14f0cb 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -51,7 +51,7 @@ #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8" /** - * lpfc_jedec_to_ascii: Hex to ascii convertor according to JEDEC rules. + * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules * @incr: integer to convert. * @hdw: ascii string holding converted integer plus a string terminator. * @@ -82,7 +82,7 @@ lpfc_jedec_to_ascii(int incr, char hdw[]) } /** - * lpfc_drvr_version_show: Return the Emulex driver string with version number. + * lpfc_drvr_version_show - Return the Emulex driver string with version number * @dev: class unused variable. * @attr: device attribute, not used. * @buf: on return contains the module description text. @@ -152,7 +152,7 @@ lpfc_bg_reftag_err_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_info_show: Return some pci info about the host in ascii. + * lpfc_info_show - Return some pci info about the host in ascii * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted text from lpfc_info(). @@ -169,7 +169,7 @@ lpfc_info_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_serialnum_show: Return the hba serial number in ascii. + * lpfc_serialnum_show - Return the hba serial number in ascii * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted text serial number. @@ -188,7 +188,7 @@ lpfc_serialnum_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_temp_sensor_show: Return the temperature sensor level. + * lpfc_temp_sensor_show - Return the temperature sensor level * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted support level. @@ -210,7 +210,7 @@ lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_modeldesc_show: Return the model description of the hba. + * lpfc_modeldesc_show - Return the model description of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd model description. @@ -229,7 +229,7 @@ lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_modelname_show: Return the model name of the hba. + * lpfc_modelname_show - Return the model name of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd model name. @@ -248,7 +248,7 @@ lpfc_modelname_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_programtype_show: Return the program type of the hba. + * lpfc_programtype_show - Return the program type of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -267,7 +267,7 @@ lpfc_programtype_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_mlomgmt_show: Return the Menlo Maintenance sli flag. + * lpfc_mlomgmt_show - Return the Menlo Maintenance sli flag * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the Menlo Maintenance sli flag. @@ -286,7 +286,7 @@ lpfc_mlomgmt_show(struct device *dev, struct device_attribute *attr, char *buf) } /** - * lpfc_vportnum_show: Return the port number in ascii of the hba. + * lpfc_vportnum_show - Return the port number in ascii of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains scsi vpd program type. @@ -305,7 +305,7 @@ lpfc_vportnum_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_fwrev_show: Return the firmware rev running in the hba. + * lpfc_fwrev_show - Return the firmware rev running in the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -326,7 +326,7 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_hdw_show: Return the jedec information about the hba. + * lpfc_hdw_show - Return the jedec information about the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -347,7 +347,7 @@ lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf) } /** - * lpfc_option_rom_version_show: Return the adapter ROM FCode version. + * lpfc_option_rom_version_show - Return the adapter ROM FCode version * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the ROM and FCode ascii strings. @@ -366,7 +366,7 @@ lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_state_show: Return the link state of the port. + * lpfc_state_show - Return the link state of the port * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains text describing the state of the link. @@ -451,7 +451,7 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_num_discovered_ports_show: Return sum of mapped and unmapped vports. + * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the sum of fc mapped and unmapped. @@ -474,7 +474,7 @@ lpfc_num_discovered_ports_show(struct device *dev, } /** - * lpfc_issue_lip: Misnomer, name carried over from long ago. + * lpfc_issue_lip - Misnomer, name carried over from long ago * @shost: Scsi_Host pointer. * * Description: @@ -529,7 +529,7 @@ lpfc_issue_lip(struct Scsi_Host *shost) } /** - * lpfc_do_offline: Issues a mailbox command to bring the link down. + * lpfc_do_offline - Issues a mailbox command to bring the link down * @phba: lpfc_hba pointer. * @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL. * @@ -537,7 +537,7 @@ lpfc_issue_lip(struct Scsi_Host *shost) * Assumes any error from lpfc_do_offline() will be negative. * Can wait up to 5 seconds for the port ring buffers count * to reach zero, prints a warning if it is not zero and continues. - * lpfc_workq_post_event() returns a non-zero return coce if call fails. + * lpfc_workq_post_event() returns a non-zero return code if call fails. * * Returns: * -EIO error posting the event @@ -591,7 +591,7 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) } /** - * lpfc_selective_reset: Offline then onlines the port. + * lpfc_selective_reset - Offline then onlines the port * @phba: lpfc_hba pointer. * * Description: @@ -632,7 +632,7 @@ lpfc_selective_reset(struct lpfc_hba *phba) } /** - * lpfc_issue_reset: Selectively resets an adapter. + * lpfc_issue_reset - Selectively resets an adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the string "selective". @@ -672,7 +672,7 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, } /** - * lpfc_nport_evt_cnt_show: Return the number of nport events. + * lpfc_nport_evt_cnt_show - Return the number of nport events * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the ascii number of nport events. @@ -691,7 +691,7 @@ lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_board_mode_show: Return the state of the board. + * lpfc_board_mode_show - Return the state of the board * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the state of the adapter. @@ -720,7 +720,7 @@ lpfc_board_mode_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_board_mode_store: Puts the hba in online, offline, warm or error state. + * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing one of the strings "online", "offline", "warm" or "error". @@ -766,14 +766,14 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, } /** - * lpfc_get_hba_info: Return various bits of informaton about the adapter. + * lpfc_get_hba_info - Return various bits of informaton about the adapter * @phba: pointer to the adapter structure. - * @mxri max xri count. - * @axri available xri count. - * @mrpi max rpi count. - * @arpi available rpi count. - * @mvpi max vpi count. - * @avpi available vpi count. + * @mxri: max xri count. + * @axri: available xri count. + * @mrpi: max rpi count. + * @arpi: available rpi count. + * @mvpi: max vpi count. + * @avpi: available vpi count. * * Description: * If an integer pointer for an count is not null then the value for the @@ -846,7 +846,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba, } /** - * lpfc_max_rpi_show: Return maximum rpi. + * lpfc_max_rpi_show - Return maximum rpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum rpi count in decimal or "Unknown". @@ -874,7 +874,7 @@ lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_used_rpi_show: Return maximum rpi minus available rpi. + * lpfc_used_rpi_show - Return maximum rpi minus available rpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the used rpi count in decimal or "Unknown". @@ -902,7 +902,7 @@ lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_max_xri_show: Return maximum xri. + * lpfc_max_xri_show - Return maximum xri * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum xri count in decimal or "Unknown". @@ -930,7 +930,7 @@ lpfc_max_xri_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_used_xri_show: Return maximum xpi minus the available xpi. + * lpfc_used_xri_show - Return maximum xpi minus the available xpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the used xri count in decimal or "Unknown". @@ -958,7 +958,7 @@ lpfc_used_xri_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_max_vpi_show: Return maximum vpi. + * lpfc_max_vpi_show - Return maximum vpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum vpi count in decimal or "Unknown". @@ -986,7 +986,7 @@ lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_used_vpi_show: Return maximum vpi minus the available vpi. + * lpfc_used_vpi_show - Return maximum vpi minus the available vpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the used vpi count in decimal or "Unknown". @@ -1014,7 +1014,7 @@ lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_npiv_info_show: Return text about NPIV support for the adapter. + * lpfc_npiv_info_show - Return text about NPIV support for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: text that must be interpreted to determine if npiv is supported. @@ -1042,7 +1042,7 @@ lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_poll_show: Return text about poll support for the adapter. + * lpfc_poll_show - Return text about poll support for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the cfg_poll in hex. @@ -1064,7 +1064,7 @@ lpfc_poll_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_poll_store: Set the value of cfg_poll for the adapter. + * lpfc_poll_store - Set the value of cfg_poll for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: one or more lpfc_polling_flags values. @@ -1136,7 +1136,7 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr, } /** - * lpfc_param_show: Return a cfg attribute value in decimal. + * lpfc_param_show - Return a cfg attribute value in decimal * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1164,7 +1164,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_param_hex_show: Return a cfg attribute value in hex. + * lpfc_param_hex_show - Return a cfg attribute value in hex * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1173,7 +1173,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ * lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the attribute value in hexidecimal. + * @buf: on return contains the attribute value in hexadecimal. * * Returns: size of formatted string. **/ @@ -1192,7 +1192,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_param_init: Intializes a cfg attribute. + * lpfc_param_init - Intializes a cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1226,7 +1226,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, int val) \ } /** - * lpfc_param_set: Set a cfg attribute value. + * lpfc_param_set - Set a cfg attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1260,7 +1260,7 @@ lpfc_##attr##_set(struct lpfc_hba *phba, int val) \ } /** - * lpfc_param_store: Set a vport attribute value. + * lpfc_param_store - Set a vport attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1300,7 +1300,7 @@ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_vport_param_show: Return decimal formatted cfg attribute value. + * lpfc_vport_param_show - Return decimal formatted cfg attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1326,17 +1326,17 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_vport_param_hex_show: Return hex formatted attribute value. + * lpfc_vport_param_hex_show - Return hex formatted attribute value * * Description: * Macro that given an attr e.g. * hba_queue_depth expands into a function with the name * lpfc_hba_queue_depth_show * - * lpfc_##attr##_show: prints the attribute value in hexidecimal. + * lpfc_##attr##_show: prints the attribute value in hexadecimal. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the attribute value in hexidecimal. + * @buf: on return contains the attribute value in hexadecimal. * * Returns: length of formatted string. **/ @@ -1353,7 +1353,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_vport_param_init: Initialize a vport cfg attribute. + * lpfc_vport_param_init - Initialize a vport cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1386,7 +1386,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, int val) \ } /** - * lpfc_vport_param_set: Set a vport cfg attribute. + * lpfc_vport_param_set - Set a vport cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1417,7 +1417,7 @@ lpfc_##attr##_set(struct lpfc_vport *vport, int val) \ } /** - * lpfc_vport_param_store: Set a vport attribute. + * lpfc_vport_param_store - Set a vport attribute * * Description: * Macro that given an attr e.g. hba_queue_depth @@ -1576,7 +1576,7 @@ static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL); static char *lpfc_soft_wwn_key = "C99G71SL8032A"; /** - * lpfc_soft_wwn_enable_store: Allows setting of the wwn if the key is valid. + * lpfc_soft_wwn_enable_store - Allows setting of the wwn if the key is valid * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the string lpfc_soft_wwn_key. @@ -1623,10 +1623,10 @@ static DEVICE_ATTR(lpfc_soft_wwn_enable, S_IWUSR, NULL, lpfc_soft_wwn_enable_store); /** - * lpfc_soft_wwpn_show: Return the cfg soft ww port name of the adapter. + * lpfc_soft_wwpn_show - Return the cfg soft ww port name of the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the wwpn in hexidecimal. + * @buf: on return contains the wwpn in hexadecimal. * * Returns: size of formatted string. **/ @@ -1643,10 +1643,10 @@ lpfc_soft_wwpn_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_soft_wwpn_store: Set the ww port name of the adapter. + * lpfc_soft_wwpn_store - Set the ww port name of the adapter * @dev class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: contains the wwpn in hexidecimal. + * @buf: contains the wwpn in hexadecimal. * @count: number of wwpn bytes in buf * * Returns: @@ -1729,10 +1729,10 @@ static DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR,\ lpfc_soft_wwpn_show, lpfc_soft_wwpn_store); /** - * lpfc_soft_wwnn_show: Return the cfg soft ww node name for the adapter. + * lpfc_soft_wwnn_show - Return the cfg soft ww node name for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the wwnn in hexidecimal. + * @buf: on return contains the wwnn in hexadecimal. * * Returns: size of formatted string. **/ @@ -1747,9 +1747,9 @@ lpfc_soft_wwnn_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_soft_wwnn_store: sets the ww node name of the adapter. + * lpfc_soft_wwnn_store - sets the ww node name of the adapter * @cdev: class device that is converted into a Scsi_host. - * @buf: contains the ww node name in hexidecimal. + * @buf: contains the ww node name in hexadecimal. * @count: number of wwnn bytes in buf. * * Returns: @@ -1845,7 +1845,7 @@ MODULE_PARM_DESC(lpfc_nodev_tmo, "for a device to come back"); /** - * lpfc_nodev_tmo_show: Return the hba dev loss timeout value. + * lpfc_nodev_tmo_show - Return the hba dev loss timeout value * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the dev loss timeout in decimal. @@ -1864,7 +1864,7 @@ lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_nodev_tmo_init: Set the hba nodev timeout value. + * lpfc_nodev_tmo_init - Set the hba nodev timeout value * @vport: lpfc vport structure pointer. * @val: contains the nodev timeout value. * @@ -1905,7 +1905,7 @@ lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val) } /** - * lpfc_update_rport_devloss_tmo: Update dev loss tmo value. + * lpfc_update_rport_devloss_tmo - Update dev loss tmo value * @vport: lpfc vport structure pointer. * * Description: @@ -1926,7 +1926,7 @@ lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) } /** - * lpfc_nodev_tmo_set: Set the vport nodev tmo and devloss tmo values. + * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values * @vport: lpfc vport structure pointer. * @val: contains the tmo value. * @@ -1982,7 +1982,7 @@ lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO, lpfc_vport_param_show(devloss_tmo) /** - * lpfc_devloss_tmo_set: Sets vport nodev tmo, devloss tmo values, changed bit. + * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit * @vport: lpfc vport structure pointer. * @val: contains the tmo value. * @@ -2094,7 +2094,7 @@ MODULE_PARM_DESC(lpfc_restrict_login, lpfc_vport_param_show(restrict_login); /** - * lpfc_restrict_login_init: Set the vport restrict login flag. + * lpfc_restrict_login_init - Set the vport restrict login flag * @vport: lpfc vport structure pointer. * @val: contains the restrict login value. * @@ -2128,7 +2128,7 @@ lpfc_restrict_login_init(struct lpfc_vport *vport, int val) } /** - * lpfc_restrict_login_set: Set the vport restrict login flag. + * lpfc_restrict_login_set - Set the vport restrict login flag * @vport: lpfc vport structure pointer. * @val: contains the restrict login value. * @@ -2201,7 +2201,7 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, */ /** - * lpfc_topology_set: Set the adapters topology field. + * lpfc_topology_set - Set the adapters topology field * @phba: lpfc_hba pointer. * @val: topology value. * @@ -2216,18 +2216,41 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, * non-zero return value from lpfc_issue_lip() * -EINVAL val out of range **/ -static int -lpfc_topology_set(struct lpfc_hba *phba, int val) +static ssize_t +lpfc_topology_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0; + int nolip = 0; + const char *val_buf = buf; int err; uint32_t prev_val; + + if (!strncmp(buf, "nolip ", strlen("nolip "))) { + nolip = 1; + val_buf = &buf[strlen("nolip ")]; + } + + if (!isdigit(val_buf[0])) + return -EINVAL; + if (sscanf(val_buf, "%i", &val) != 1) + return -EINVAL; + if (val >= 0 && val <= 6) { prev_val = phba->cfg_topology; phba->cfg_topology = val; + if (nolip) + return strlen(buf); + err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); - if (err) + if (err) { phba->cfg_topology = prev_val; - return err; + return -EINVAL; + } else + return strlen(buf); } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "%d:0467 lpfc_topology attribute cannot be set to %d, " @@ -2240,14 +2263,12 @@ module_param(lpfc_topology, int, 0); MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology"); lpfc_param_show(topology) lpfc_param_init(topology, 0, 0, 6) -lpfc_param_store(topology) static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR, lpfc_topology_show, lpfc_topology_store); /** - * lpfc_stat_data_ctrl_store: write call back for lpfc_stat_data_ctrl - * sysfs file. + * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file * @dev: Pointer to class device. * @buf: Data buffer. * @count: Size of the data buffer. @@ -2282,7 +2303,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr, unsigned long base, step, bucket_type; if (!strncmp(buf, "setbucket", strlen("setbucket"))) { - if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN) + if (strlen(buf) > (LPFC_MAX_DATA_CTRL_LEN - 1)) return -EINVAL; strcpy(bucket_data, buf); @@ -2411,8 +2432,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr, /** - * lpfc_stat_data_ctrl_show: Read callback function for - * lpfc_stat_data_ctrl sysfs file. + * lpfc_stat_data_ctrl_show - Read function for lpfc_stat_data_ctrl sysfs file * @dev: Pointer to class device object. * @buf: Data buffer. * @@ -2489,8 +2509,7 @@ static DEVICE_ATTR(lpfc_stat_data_ctrl, S_IRUGO | S_IWUSR, /** - * sysfs_drvr_stat_data_read: Read callback function for lpfc_drvr_stat_data - * sysfs attribute. + * sysfs_drvr_stat_data_read - Read function for lpfc_drvr_stat_data attribute * @kobj: Pointer to the kernel object * @bin_attr: Attribute object * @buff: Buffer pointer @@ -2585,7 +2604,7 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = { */ /** - * lpfc_link_speed_set: Set the adapters link speed. + * lpfc_link_speed_set - Set the adapters link speed * @phba: lpfc_hba pointer. * @val: link speed value. * @@ -2601,12 +2620,29 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = { * non-zero return value from lpfc_issue_lip() * -EINVAL val out of range **/ -static int -lpfc_link_speed_set(struct lpfc_hba *phba, int val) +static ssize_t +lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0; + int nolip = 0; + const char *val_buf = buf; int err; uint32_t prev_val; + if (!strncmp(buf, "nolip ", strlen("nolip "))) { + nolip = 1; + val_buf = &buf[strlen("nolip ")]; + } + + if (!isdigit(val_buf[0])) + return -EINVAL; + if (sscanf(val_buf, "%i", &val) != 1) + return -EINVAL; + if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) || ((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) || ((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) || @@ -2614,14 +2650,19 @@ lpfc_link_speed_set(struct lpfc_hba *phba, int val) ((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb))) return -EINVAL; - if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED) + if ((val >= 0 && val <= 8) && (LPFC_LINK_SPEED_BITMAP & (1 << val))) { prev_val = phba->cfg_link_speed; phba->cfg_link_speed = val; + if (nolip) + return strlen(buf); + err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); - if (err) + if (err) { phba->cfg_link_speed = prev_val; - return err; + return -EINVAL; + } else + return strlen(buf); } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -2637,7 +2678,7 @@ MODULE_PARM_DESC(lpfc_link_speed, "Select link speed"); lpfc_param_show(link_speed) /** - * lpfc_link_speed_init: Set the adapters link speed. + * lpfc_link_speed_init - Set the adapters link speed * @phba: lpfc_hba pointer. * @val: link speed value. * @@ -2668,7 +2709,6 @@ lpfc_link_speed_init(struct lpfc_hba *phba, int val) return -EINVAL; } -lpfc_param_store(link_speed) static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR, lpfc_link_speed_show, lpfc_link_speed_store); @@ -2865,7 +2905,7 @@ MODULE_PARM_DESC(lpfc_prot_guard, "host protection guard type"); /* - * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count + * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count * This value can be set to values between 64 and 256. The default value is * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE). @@ -2967,7 +3007,7 @@ struct device_attribute *lpfc_vport_attrs[] = { }; /** - * sysfs_ctlreg_write: Write method for writing to ctlreg. + * sysfs_ctlreg_write - Write method for writing to ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be written to the adapter IOREG space. @@ -3017,7 +3057,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, } /** - * sysfs_ctlreg_read: Read method for reading from ctlreg. + * sysfs_ctlreg_read - Read method for reading from ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: if succesful contains the data from the adapter IOREG space. @@ -3078,7 +3118,7 @@ static struct bin_attribute sysfs_ctlreg_attr = { }; /** - * sysfs_mbox_idle: frees the sysfs mailbox. + * sysfs_mbox_idle - frees the sysfs mailbox * @phba: lpfc_hba pointer **/ static void @@ -3095,7 +3135,7 @@ sysfs_mbox_idle(struct lpfc_hba *phba) } /** - * sysfs_mbox_write: Write method for writing information via mbox. + * sysfs_mbox_write - Write method for writing information via mbox * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be written to sysfs mbox. @@ -3170,7 +3210,7 @@ sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr, } /** - * sysfs_mbox_read: Read method for reading information via mbox. + * sysfs_mbox_read - Read method for reading information via mbox * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be read from sysfs mbox. @@ -3374,7 +3414,7 @@ static struct bin_attribute sysfs_mbox_attr = { }; /** - * lpfc_alloc_sysfs_attr: Creates the ctlreg and mbox entries. + * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries * @vport: address of lpfc vport structure. * * Return codes: @@ -3415,7 +3455,7 @@ out: } /** - * lpfc_free_sysfs_attr: Removes the ctlreg and mbox entries. + * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries * @vport: address of lpfc vport structure. **/ void @@ -3437,7 +3477,7 @@ lpfc_free_sysfs_attr(struct lpfc_vport *vport) */ /** - * lpfc_get_host_port_id: Copy the vport DID into the scsi host port id. + * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id * @shost: kernel scsi host pointer. **/ static void @@ -3450,7 +3490,7 @@ lpfc_get_host_port_id(struct Scsi_Host *shost) } /** - * lpfc_get_host_port_type: Set the value of the scsi host port type. + * lpfc_get_host_port_type - Set the value of the scsi host port type * @shost: kernel scsi host pointer. **/ static void @@ -3482,7 +3522,7 @@ lpfc_get_host_port_type(struct Scsi_Host *shost) } /** - * lpfc_get_host_port_state: Set the value of the scsi host port state. + * lpfc_get_host_port_state - Set the value of the scsi host port state * @shost: kernel scsi host pointer. **/ static void @@ -3520,7 +3560,7 @@ lpfc_get_host_port_state(struct Scsi_Host *shost) } /** - * lpfc_get_host_speed: Set the value of the scsi host speed. + * lpfc_get_host_speed - Set the value of the scsi host speed * @shost: kernel scsi host pointer. **/ static void @@ -3556,7 +3596,7 @@ lpfc_get_host_speed(struct Scsi_Host *shost) } /** - * lpfc_get_host_fabric_name: Set the value of the scsi host fabric name. + * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name * @shost: kernel scsi host pointer. **/ static void @@ -3582,7 +3622,7 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost) } /** - * lpfc_get_stats: Return statistical information about the adapter. + * lpfc_get_stats - Return statistical information about the adapter * @shost: kernel scsi host pointer. * * Notes: @@ -3707,7 +3747,7 @@ lpfc_get_stats(struct Scsi_Host *shost) } /** - * lpfc_reset_stats: Copy the adapter link stats information. + * lpfc_reset_stats - Copy the adapter link stats information * @shost: kernel scsi host pointer. **/ static void @@ -3788,7 +3828,7 @@ lpfc_reset_stats(struct Scsi_Host *shost) */ /** - * lpfc_get_node_by_target: Return the nodelist for a target. + * lpfc_get_node_by_target - Return the nodelist for a target * @starget: kernel scsi target pointer. * * Returns: @@ -3817,7 +3857,7 @@ lpfc_get_node_by_target(struct scsi_target *starget) } /** - * lpfc_get_starget_port_id: Set the target port id to the ndlp DID or -1. + * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1 * @starget: kernel scsi target pointer. **/ static void @@ -3829,7 +3869,7 @@ lpfc_get_starget_port_id(struct scsi_target *starget) } /** - * lpfc_get_starget_node_name: Set the target node name. + * lpfc_get_starget_node_name - Set the target node name * @starget: kernel scsi target pointer. * * Description: Set the target node name to the ndlp node name wwn or zero. @@ -3844,7 +3884,7 @@ lpfc_get_starget_node_name(struct scsi_target *starget) } /** - * lpfc_get_starget_port_name: Set the target port name. + * lpfc_get_starget_port_name - Set the target port name * @starget: kernel scsi target pointer. * * Description: set the target port name to the ndlp port name wwn or zero. @@ -3859,7 +3899,7 @@ lpfc_get_starget_port_name(struct scsi_target *starget) } /** - * lpfc_set_rport_loss_tmo: Set the rport dev loss tmo. + * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo * @rport: fc rport address. * @timeout: new value for dev loss tmo. * @@ -3877,7 +3917,7 @@ lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) } /** - * lpfc_rport_show_function: Return rport target information. + * lpfc_rport_show_function - Return rport target information * * Description: * Macro that uses field to generate a function with the name lpfc_show_rport_ @@ -3905,7 +3945,7 @@ lpfc_show_rport_##field (struct device *dev, \ static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL) /** - * lpfc_set_vport_symbolic_name: Set the vport's symbolic name. + * lpfc_set_vport_symbolic_name - Set the vport's symbolic name * @fc_vport: The fc_vport who's symbolic name has been changed. * * Description: @@ -4048,7 +4088,7 @@ struct fc_function_template lpfc_vport_transport_functions = { }; /** - * lpfc_get_cfgparam: Used during probe_one to init the adapter structure. + * lpfc_get_cfgparam - Used during probe_one to init the adapter structure * @phba: lpfc_hba pointer. **/ void @@ -4097,7 +4137,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) } /** - * lpfc_get_vport_cfgparam: Used during port create, init the vport structure. + * lpfc_get_vport_cfgparam - Used during port create, init the vport structure * @vport: lpfc_vport pointer. **/ void diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 07f4976..f88ce3f 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -184,6 +184,8 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *); struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *); void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *); uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *); +void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t, + uint32_t); void lpfc_reset_barrier(struct lpfc_hba * phba); int lpfc_sli_brdready(struct lpfc_hba *, uint32_t); diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 81cdcf4..52be564 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -47,7 +47,7 @@ #include "lpfc_debugfs.h" #ifdef CONFIG_SCSI_LPFC_DEBUG_FS -/** +/* * debugfs interface * * To access this interface the user should: @@ -95,7 +95,7 @@ module_param(lpfc_debugfs_max_slow_ring_trc, int, 0); MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc, "Set debugfs slow ring trace depth"); -int lpfc_debugfs_mask_disc_trc; +static int lpfc_debugfs_mask_disc_trc; module_param(lpfc_debugfs_mask_disc_trc, int, 0); MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc, "Set debugfs discovery trace mask"); @@ -127,7 +127,7 @@ static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0); static unsigned long lpfc_debugfs_start_time = 0L; /** - * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer. + * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer * @vport: The vport to gather the log info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -187,7 +187,7 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size) } /** - * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer. + * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer * @phba: The HBA to gather the log info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -250,7 +250,7 @@ lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size) static int lpfc_debugfs_last_hbq = -1; /** - * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer. + * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer * @phba: The HBA to gather host buffer info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -369,7 +369,7 @@ skipit: static int lpfc_debugfs_last_hba_slim_off; /** - * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer. + * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer * @phba: The HBA to gather SLIM info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -399,8 +399,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) len += snprintf(buf+len, size-len, "HBA SLIM\n"); lpfc_memcpy_from_slim(buffer, - ((uint8_t *)phba->MBslimaddr) + lpfc_debugfs_last_hba_slim_off, - 1024); + phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024); ptr = (uint32_t *)&buffer[0]; off = lpfc_debugfs_last_hba_slim_off; @@ -426,7 +425,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) } /** - * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer. + * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer * @phba: The HBA to gather Host SLIM info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -501,7 +500,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) } /** - * lpfc_debugfs_nodelist_data - Dump target node list to a buffer. + * lpfc_debugfs_nodelist_data - Dump target node list to a buffer * @vport: The vport to gather target node info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -599,7 +598,7 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) #endif /** - * lpfc_debugfs_disc_trc - Store discovery trace log. + * lpfc_debugfs_disc_trc - Store discovery trace log * @vport: The vport to associate this trace string with for retrieval. * @mask: Log entry classification. * @fmt: Format string to be displayed when dumping the log. @@ -643,7 +642,7 @@ lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt, } /** - * lpfc_debugfs_slow_ring_trc - Store slow ring trace log. + * lpfc_debugfs_slow_ring_trc - Store slow ring trace log * @phba: The phba to associate this trace string with for retrieval. * @fmt: Format string to be displayed when dumping the log. * @data1: 1st data parameter to be applied to @fmt. @@ -682,7 +681,7 @@ lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt, #ifdef CONFIG_SCSI_LPFC_DEBUG_FS /** - * lpfc_debugfs_disc_trc_open - Open the discovery trace log. + * lpfc_debugfs_disc_trc_open - Open the discovery trace log * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -732,7 +731,7 @@ out: } /** - * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log. + * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -782,7 +781,7 @@ out: } /** - * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer. + * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -824,7 +823,7 @@ out: } /** - * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer. + * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -866,7 +865,7 @@ out: } /** - * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer. + * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -993,7 +992,7 @@ lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf, /** - * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file. + * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -1035,7 +1034,7 @@ out: } /** - * lpfc_debugfs_lseek - Seek through a debugfs file. + * lpfc_debugfs_lseek - Seek through a debugfs file * @file: The file pointer to seek through. * @off: The offset to seek to or the amount to seek by. * @whence: Indicates how to seek. @@ -1073,7 +1072,7 @@ lpfc_debugfs_lseek(struct file *file, loff_t off, int whence) } /** - * lpfc_debugfs_read - Read a debugfs file. + * lpfc_debugfs_read - Read a debugfs file * @file: The file pointer to read from. * @buf: The buffer to copy the data to. * @nbytes: The number of bytes to read. @@ -1098,7 +1097,7 @@ lpfc_debugfs_read(struct file *file, char __user *buf, } /** - * lpfc_debugfs_release - Release the buffer used to store debugfs file data. + * lpfc_debugfs_release - Release the buffer used to store debugfs file data * @inode: The inode pointer that contains a vport pointer. (unused) * @file: The file pointer that contains the buffer to release. * @@ -1210,7 +1209,7 @@ static atomic_t lpfc_debugfs_hba_count; #endif /** - * lpfc_debugfs_initialize - Initialize debugfs for a vport. + * lpfc_debugfs_initialize - Initialize debugfs for a vport * @vport: The vport pointer to initialize. * * Description: @@ -1434,7 +1433,7 @@ debug_failed: } /** - * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport. + * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport * @vport: The vport pointer to remove from debugfs. * * Description: diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index f29e548..ffd1089 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -99,6 +99,7 @@ struct lpfc_nodelist { #define NLP_USG_FREE_ACK_BIT 0x8 /* Indicate ndlp memory free invoked */ struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */ + struct lpfc_hba *phba; struct fc_rport *rport; /* Corresponding FC transport port structure */ struct lpfc_vport *vport; diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index a730248..b8b34cf 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -55,7 +55,7 @@ static void lpfc_register_new_vport(struct lpfc_hba *phba, static int lpfc_max_els_tries = 3; /** - * lpfc_els_chk_latt: Check host link attention event for a vport. + * lpfc_els_chk_latt - Check host link attention event for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether there is an outstanding host link @@ -116,7 +116,7 @@ lpfc_els_chk_latt(struct lpfc_vport *vport) } /** - * lpfc_prep_els_iocb: Allocate and prepare a lpfc iocb data structure. + * lpfc_prep_els_iocb - Allocate and prepare a lpfc iocb data structure * @vport: pointer to a host virtual N_Port data structure. * @expectRsp: flag indicating whether response is expected. * @cmdSize: size of the ELS command. @@ -290,7 +290,7 @@ els_iocb_free_pcmb_exit: } /** - * lpfc_issue_fabric_reglogin: Issue fabric registration login for a vport. + * lpfc_issue_fabric_reglogin - Issue fabric registration login for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues a fabric registration login for a @vport. An @@ -386,7 +386,7 @@ fail: } /** - * lpfc_cmpl_els_flogi_fabric: Completion function for flogi to a fabric port. + * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @sp: pointer to service parameter data structure. @@ -509,7 +509,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_flogi_nport: Completion function for flogi to an N_Port. + * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @sp: pointer to service parameter data structure. @@ -626,7 +626,7 @@ fail: } /** - * lpfc_cmpl_els_flogi: Completion callback function for flogi. + * lpfc_cmpl_els_flogi - Completion callback function for flogi * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -751,7 +751,7 @@ out: } /** - * lpfc_issue_els_flogi: Issue an flogi iocb command for a vport. + * lpfc_issue_els_flogi - Issue an flogi iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -849,7 +849,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_els_abort_flogi: Abort all outstanding flogi iocbs. + * lpfc_els_abort_flogi - Abort all outstanding flogi iocbs * @phba: pointer to lpfc hba data structure. * * This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs @@ -898,7 +898,7 @@ lpfc_els_abort_flogi(struct lpfc_hba *phba) } /** - * lpfc_initial_flogi: Issue an initial fabric login for a vport. + * lpfc_initial_flogi - Issue an initial fabric login for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues an initial Fabric Login (FLOGI) for the @vport @@ -949,7 +949,7 @@ lpfc_initial_flogi(struct lpfc_vport *vport) } /** - * lpfc_initial_fdisc: Issue an initial fabric discovery for a vport. + * lpfc_initial_fdisc - Issue an initial fabric discovery for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues an initial Fabric Discover (FDISC) for the @vport @@ -998,7 +998,7 @@ lpfc_initial_fdisc(struct lpfc_vport *vport) } /** - * lpfc_more_plogi: Check and issue remaining plogis for a vport. + * lpfc_more_plogi - Check and issue remaining plogis for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether there are more remaining Port Logins @@ -1031,7 +1031,7 @@ lpfc_more_plogi(struct lpfc_vport *vport) } /** - * lpfc_plogi_confirm_nport: Confirm pologi wwpn matches stored ndlp. + * lpfc_plogi_confirm_nport - Confirm pologi wwpn matches stored ndlp * @phba: pointer to lpfc hba data structure. * @prsp: pointer to response IOCB payload. * @ndlp: pointer to a node-list data structure. @@ -1165,7 +1165,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, } /** - * lpfc_end_rscn: Check and handle more rscn for a vport. + * lpfc_end_rscn - Check and handle more rscn for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether more Registration State Change @@ -1197,7 +1197,7 @@ lpfc_end_rscn(struct lpfc_vport *vport) } /** - * lpfc_cmpl_els_plogi: Completion callback function for plogi. + * lpfc_cmpl_els_plogi - Completion callback function for plogi * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1322,7 +1322,7 @@ out: } /** - * lpfc_issue_els_plogi: Issue an plogi iocb command for a vport. + * lpfc_issue_els_plogi - Issue an plogi iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @did: destination port identifier. * @retry: number of retries to the command IOCB. @@ -1401,7 +1401,7 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry) } /** - * lpfc_cmpl_els_prli: Completion callback function for prli. + * lpfc_cmpl_els_prli - Completion callback function for prli * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1472,7 +1472,7 @@ out: } /** - * lpfc_issue_els_prli: Issue a prli iocb command for a vport. + * lpfc_issue_els_prli - Issue a prli iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1562,7 +1562,7 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_rscn_disc: Perform rscn discovery for a vport. + * lpfc_rscn_disc - Perform rscn discovery for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine performs Registration State Change Notification (RSCN) @@ -1588,7 +1588,7 @@ lpfc_rscn_disc(struct lpfc_vport *vport) } /** - * lpfc_adisc_done: Complete the adisc phase of discovery. + * lpfc_adisc_done - Complete the adisc phase of discovery * @vport: pointer to lpfc_vport hba data structure that finished all ADISCs. * * This function is called when the final ADISC is completed during discovery. @@ -1639,7 +1639,7 @@ lpfc_adisc_done(struct lpfc_vport *vport) } /** - * lpfc_more_adisc: Issue more adisc as needed. + * lpfc_more_adisc - Issue more adisc as needed * @vport: pointer to a host virtual N_Port data structure. * * This routine determines whether there are more ndlps on a @vport @@ -1672,7 +1672,7 @@ lpfc_more_adisc(struct lpfc_vport *vport) } /** - * lpfc_cmpl_els_adisc: Completion callback function for adisc. + * lpfc_cmpl_els_adisc - Completion callback function for adisc * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1760,7 +1760,7 @@ out: } /** - * lpfc_issue_els_adisc: Issue an address discover iocb to an node on a vport. + * lpfc_issue_els_adisc - Issue an address discover iocb to an node on a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1833,7 +1833,7 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_logo: Completion callback function for logo. + * lpfc_cmpl_els_logo - Completion callback function for logo * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1910,7 +1910,7 @@ out: } /** - * lpfc_issue_els_logo: Issue a logo to an node on a vport. + * lpfc_issue_els_logo - Issue a logo to an node on a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1991,7 +1991,7 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_cmd: Completion callback function for generic els command. + * lpfc_cmpl_els_cmd - Completion callback function for generic els command * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2031,7 +2031,7 @@ lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_issue_els_scr: Issue a scr to an node on a vport. + * lpfc_issue_els_scr - Issue a scr to an node on a vport * @vport: pointer to a host virtual N_Port data structure. * @nportid: N_Port identifier to the remote node. * @retry: number of retries to the command IOCB. @@ -2125,7 +2125,7 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) } /** - * lpfc_issue_els_farpr: Issue a farp to an node on a vport. + * lpfc_issue_els_farpr - Issue a farp to an node on a vport * @vport: pointer to a host virtual N_Port data structure. * @nportid: N_Port identifier to the remote node. * @retry: number of retries to the command IOCB. @@ -2236,7 +2236,7 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) } /** - * lpfc_cancel_retry_delay_tmo: Cancel the timer with delayed iocb-cmd retry. + * lpfc_cancel_retry_delay_tmo - Cancel the timer with delayed iocb-cmd retry * @vport: pointer to a host virtual N_Port data structure. * @nlp: pointer to a node-list data structure. * @@ -2291,7 +2291,7 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp) } /** - * lpfc_els_retry_delay: Timer function with a ndlp delayed function timer. + * lpfc_els_retry_delay - Timer function with a ndlp delayed function timer * @ptr: holder for the pointer to the timer function associated data (ndlp). * * This routine is invoked by the ndlp delayed-function timer to check @@ -2333,7 +2333,7 @@ lpfc_els_retry_delay(unsigned long ptr) } /** - * lpfc_els_retry_delay_handler: Work thread handler for ndlp delayed function. + * lpfc_els_retry_delay_handler - Work thread handler for ndlp delayed function * @ndlp: pointer to a node-list data structure. * * This routine is the worker-thread handler for processing the @ndlp delayed @@ -2404,7 +2404,7 @@ lpfc_els_retry_delay_handler(struct lpfc_nodelist *ndlp) } /** - * lpfc_els_retry: Make retry decision on an els command iocb. + * lpfc_els_retry - Make retry decision on an els command iocb * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2732,7 +2732,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_free_data: Free lpfc dma buffer and data structure with an iocb. + * lpfc_els_free_data - Free lpfc dma buffer and data structure with an iocb * @phba: pointer to lpfc hba data structure. * @buf_ptr1: pointer to the lpfc DMA buffer data structure. * @@ -2764,7 +2764,7 @@ lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1) } /** - * lpfc_els_free_bpl: Free lpfc dma buffer and data structure with bpl. + * lpfc_els_free_bpl - Free lpfc dma buffer and data structure with bpl * @phba: pointer to lpfc hba data structure. * @buf_ptr: pointer to the lpfc dma buffer data structure. * @@ -2784,7 +2784,7 @@ lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr) } /** - * lpfc_els_free_iocb: Free a command iocb and its associated resources. + * lpfc_els_free_iocb - Free a command iocb and its associated resources * @phba: pointer to lpfc hba data structure. * @elsiocb: pointer to lpfc els command iocb data structure. * @@ -2877,7 +2877,7 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) } /** - * lpfc_cmpl_els_logo_acc: Completion callback function to logo acc response. + * lpfc_cmpl_els_logo_acc - Completion callback function to logo acc response * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2931,7 +2931,7 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_mbx_cmpl_dflt_rpi: Completion callbk func for unreg dflt rpi mbox cmd. + * lpfc_mbx_cmpl_dflt_rpi - Completion callbk func for unreg dflt rpi mbox cmd * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -2965,7 +2965,7 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_cmpl_els_rsp: Completion callback function for els response iocb cmd. + * lpfc_cmpl_els_rsp - Completion callback function for els response iocb cmd * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -3136,7 +3136,7 @@ out: } /** - * lpfc_els_rsp_acc: Prepare and issue an acc response iocb command. + * lpfc_els_rsp_acc - Prepare and issue an acc response iocb command * @vport: pointer to a host virtual N_Port data structure. * @flag: the els command code to be accepted. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3275,7 +3275,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag, } /** - * lpfc_els_rsp_reject: Propare and issue a rjt response iocb command. + * lpfc_els_rsp_reject - Propare and issue a rjt response iocb command * @vport: pointer to a virtual N_Port data structure. * @rejectError: * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3356,7 +3356,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError, } /** - * lpfc_els_rsp_adisc_acc: Prepare and issue acc response to adisc iocb cmd. + * lpfc_els_rsp_adisc_acc - Prepare and issue acc response to adisc iocb cmd * @vport: pointer to a virtual N_Port data structure. * @oldiocb: pointer to the original lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -3431,7 +3431,7 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, } /** - * lpfc_els_rsp_prli_acc: Prepare and issue acc response to prli iocb cmd. + * lpfc_els_rsp_prli_acc - Prepare and issue acc response to prli iocb cmd * @vport: pointer to a virtual N_Port data structure. * @oldiocb: pointer to the original lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -3529,7 +3529,7 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, } /** - * lpfc_els_rsp_rnid_acc: Issue rnid acc response iocb command. + * lpfc_els_rsp_rnid_acc - Issue rnid acc response iocb command * @vport: pointer to a virtual N_Port data structure. * @format: rnid command format. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3635,7 +3635,7 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format, } /** - * lpfc_els_disc_adisc: Issue remaining adisc iocbs to npr nodes of a vport. + * lpfc_els_disc_adisc - Issue remaining adisc iocbs to npr nodes of a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues Address Discover (ADISC) ELS commands to those @@ -3693,7 +3693,7 @@ lpfc_els_disc_adisc(struct lpfc_vport *vport) } /** - * lpfc_els_disc_plogi: Issue plogi for all npr nodes of a vport before adisc. + * lpfc_els_disc_plogi - Issue plogi for all npr nodes of a vport before adisc * @vport: pointer to a host virtual N_Port data structure. * * This routine issues Port Login (PLOGI) ELS commands to all the N_Ports @@ -3752,7 +3752,7 @@ lpfc_els_disc_plogi(struct lpfc_vport *vport) } /** - * lpfc_els_flush_rscn: Clean up any rscn activities with a vport. + * lpfc_els_flush_rscn - Clean up any rscn activities with a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine cleans up any Registration State Change Notification @@ -3791,7 +3791,7 @@ lpfc_els_flush_rscn(struct lpfc_vport *vport) } /** - * lpfc_rscn_payload_check: Check whether there is a pending rscn to a did. + * lpfc_rscn_payload_check - Check whether there is a pending rscn to a did * @vport: pointer to a host virtual N_Port data structure. * @did: remote destination port identifier. * @@ -3866,7 +3866,7 @@ return_did_out: } /** - * lpfc_rscn_recovery_check: Send recovery event to vport nodes matching rscn + * lpfc_rscn_recovery_check - Send recovery event to vport nodes matching rscn * @vport: pointer to a host virtual N_Port data structure. * * This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the @@ -3895,7 +3895,7 @@ lpfc_rscn_recovery_check(struct lpfc_vport *vport) } /** - * lpfc_send_rscn_event: Send an RSCN event to management application. + * lpfc_send_rscn_event - Send an RSCN event to management application * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @@ -3938,7 +3938,7 @@ lpfc_send_rscn_event(struct lpfc_vport *vport, } /** - * lpfc_els_rcv_rscn: Process an unsolicited rscn iocb. + * lpfc_els_rcv_rscn - Process an unsolicited rscn iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4134,7 +4134,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_handle_rscn: Handle rscn for a vport. + * lpfc_els_handle_rscn - Handle rscn for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine handles the Registration State Configuration Notification @@ -4222,7 +4222,7 @@ lpfc_els_handle_rscn(struct lpfc_vport *vport) } /** - * lpfc_els_rcv_flogi: Process an unsolicited flogi iocb. + * lpfc_els_rcv_flogi - Process an unsolicited flogi iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4336,7 +4336,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_rnid: Process an unsolicited rnid iocb. + * lpfc_els_rcv_rnid - Process an unsolicited rnid iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4391,7 +4391,7 @@ lpfc_els_rcv_rnid(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_lirr: Process an unsolicited lirr iocb. + * lpfc_els_rcv_lirr - Process an unsolicited lirr iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4419,7 +4419,7 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rsp_rps_acc: Completion callbk func for MBX_READ_LNK_STAT mbox cmd. + * lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -4513,7 +4513,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_els_rcv_rps: Process an unsolicited rps iocb. + * lpfc_els_rcv_rps - Process an unsolicited rps iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4590,7 +4590,7 @@ reject_out: } /** - * lpfc_els_rsp_rpl_acc: Issue an accept rpl els command. + * lpfc_els_rsp_rpl_acc - Issue an accept rpl els command * @vport: pointer to a host virtual N_Port data structure. * @cmdsize: size of the ELS command. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -4662,7 +4662,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize, } /** - * lpfc_els_rcv_rpl: Process an unsolicited rpl iocb. + * lpfc_els_rcv_rpl - Process an unsolicited rpl iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4721,7 +4721,7 @@ lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_farp: Process an unsolicited farp request els command. + * lpfc_els_rcv_farp - Process an unsolicited farp request els command * @vport: pointer to a virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4804,7 +4804,7 @@ lpfc_els_rcv_farp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_farpr: Process an unsolicited farp response iocb. + * lpfc_els_rcv_farpr - Process an unsolicited farp response iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4842,7 +4842,7 @@ lpfc_els_rcv_farpr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_fan: Process an unsolicited fan iocb command. + * lpfc_els_rcv_fan - Process an unsolicited fan iocb command * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @fan_ndlp: pointer to a node-list data structure. @@ -4890,7 +4890,7 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_timeout: Handler funciton to the els timer. + * lpfc_els_timeout - Handler funciton to the els timer * @ptr: holder for the timer function associated data. * * This routine is invoked by the ELS timer after timeout. It posts the ELS @@ -4919,7 +4919,7 @@ lpfc_els_timeout(unsigned long ptr) } /** - * lpfc_els_timeout_handler: Process an els timeout event. + * lpfc_els_timeout_handler - Process an els timeout event * @vport: pointer to a virtual N_Port data structure. * * This routine is the actual handler function that processes an ELS timeout @@ -4994,7 +4994,7 @@ lpfc_els_timeout_handler(struct lpfc_vport *vport) } /** - * lpfc_els_flush_cmd: Clean up the outstanding els commands to a vport. + * lpfc_els_flush_cmd - Clean up the outstanding els commands to a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine is used to clean up all the outstanding ELS commands on a @@ -5058,25 +5058,15 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &piocb->iocb; - list_del_init(&piocb->list); - - if (!piocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, piocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } - } + /* Cancell all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); return; } /** - * lpfc_els_flush_all_cmd: Clean up all the outstanding els commands to a HBA. + * lpfc_els_flush_all_cmd - Clean up all the outstanding els commands to a HBA * @phba: pointer to lpfc hba data structure. * * This routine is used to clean up all the outstanding ELS commands on a @@ -5121,23 +5111,16 @@ lpfc_els_flush_all_cmd(struct lpfc_hba *phba) lpfc_sli_issue_abort_iotag(phba, pring, piocb); } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &piocb->iocb; - list_del_init(&piocb->list); - if (!piocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, piocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } - } + + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); + return; } /** - * lpfc_send_els_failure_event: Posts an ELS command failure event. + * lpfc_send_els_failure_event - Posts an ELS command failure event * @phba: Pointer to hba context object. * @cmdiocbp: Pointer to command iocb which reported error. * @rspiocbp: Pointer to response iocb which reported error. @@ -5204,7 +5187,7 @@ lpfc_send_els_failure_event(struct lpfc_hba *phba, } /** - * lpfc_send_els_event: Posts unsolicited els event. + * lpfc_send_els_event - Posts unsolicited els event * @vport: Pointer to vport object. * @ndlp: Pointer FC node object. * @cmd: ELS command code. @@ -5284,7 +5267,7 @@ lpfc_send_els_event(struct lpfc_vport *vport, /** - * lpfc_els_unsol_buffer: Process an unsolicited event data buffer. + * lpfc_els_unsol_buffer - Process an unsolicited event data buffer * @phba: pointer to lpfc hba data structure. * @pring: pointer to a SLI ring. * @vport: pointer to a host virtual N_Port data structure. @@ -5592,7 +5575,7 @@ dropit: } /** - * lpfc_find_vport_by_vpid: Find a vport on a HBA through vport identifier. + * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier * @phba: pointer to lpfc hba data structure. * @vpi: host virtual N_Port identifier. * @@ -5622,7 +5605,7 @@ lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) } /** - * lpfc_els_unsol_event: Process an unsolicited event from an els sli ring. + * lpfc_els_unsol_event - Process an unsolicited event from an els sli ring * @phba: pointer to lpfc hba data structure. * @pring: pointer to a SLI ring. * @elsiocb: pointer to lpfc els iocb data structure. @@ -5710,7 +5693,7 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_do_scr_ns_plogi: Issue a plogi to the name server for scr. + * lpfc_do_scr_ns_plogi - Issue a plogi to the name server for scr * @phba: pointer to lpfc hba data structure. * @vport: pointer to a virtual N_Port data structure. * @@ -5781,7 +5764,7 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport) } /** - * lpfc_cmpl_reg_new_vport: Completion callback function to register new vport. + * lpfc_cmpl_reg_new_vport - Completion callback function to register new vport * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -5850,7 +5833,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_register_new_vport: Register a new vport with a HBA. + * lpfc_register_new_vport - Register a new vport with a HBA * @phba: pointer to lpfc hba data structure. * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. @@ -5899,7 +5882,7 @@ mbox_err_exit: } /** - * lpfc_cmpl_els_fdisc: Completion function for fdisc iocb command. + * lpfc_cmpl_els_fdisc - Completion function for fdisc iocb command * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6007,7 +5990,7 @@ out: } /** - * lpfc_issue_els_fdisc: Issue a fdisc iocb command. + * lpfc_issue_els_fdisc - Issue a fdisc iocb command * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -6101,7 +6084,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_npiv_logo: Completion function with vport logo. + * lpfc_cmpl_els_npiv_logo - Completion function with vport logo * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6136,7 +6119,7 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_issue_els_npiv_logo: Issue a logo off a vport. + * lpfc_issue_els_npiv_logo - Issue a logo off a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @@ -6197,7 +6180,7 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) } /** - * lpfc_fabric_block_timeout: Handler function to the fabric block timer. + * lpfc_fabric_block_timeout - Handler function to the fabric block timer * @ptr: holder for the timer function associated data. * * This routine is invoked by the fabric iocb block timer after @@ -6226,7 +6209,7 @@ lpfc_fabric_block_timeout(unsigned long ptr) } /** - * lpfc_resume_fabric_iocbs: Issue a fabric iocb from driver internal list. + * lpfc_resume_fabric_iocbs - Issue a fabric iocb from driver internal list * @phba: pointer to lpfc hba data structure. * * This routine issues one fabric iocb from the driver internal list to @@ -6285,7 +6268,7 @@ repeat: } /** - * lpfc_unblock_fabric_iocbs: Unblock issuing fabric iocb command. + * lpfc_unblock_fabric_iocbs - Unblock issuing fabric iocb command * @phba: pointer to lpfc hba data structure. * * This routine unblocks the issuing fabric iocb command. The function @@ -6303,7 +6286,7 @@ lpfc_unblock_fabric_iocbs(struct lpfc_hba *phba) } /** - * lpfc_block_fabric_iocbs: Block issuing fabric iocb command. + * lpfc_block_fabric_iocbs - Block issuing fabric iocb command * @phba: pointer to lpfc hba data structure. * * This routine blocks the issuing fabric iocb for a specified amount of @@ -6325,7 +6308,7 @@ lpfc_block_fabric_iocbs(struct lpfc_hba *phba) } /** - * lpfc_cmpl_fabric_iocb: Completion callback function for fabric iocb. + * lpfc_cmpl_fabric_iocb - Completion callback function for fabric iocb * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6384,7 +6367,7 @@ lpfc_cmpl_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_issue_fabric_iocb: Issue a fabric iocb command. + * lpfc_issue_fabric_iocb - Issue a fabric iocb command * @phba: pointer to lpfc hba data structure. * @iocb: pointer to lpfc command iocb data structure. * @@ -6453,7 +6436,7 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb) } /** - * lpfc_fabric_abort_vport: Abort a vport's iocbs from driver fabric iocb list. + * lpfc_fabric_abort_vport - Abort a vport's iocbs from driver fabric iocb list * @vport: pointer to a virtual N_Port data structure. * * This routine aborts all the IOCBs associated with a @vport from the @@ -6468,7 +6451,6 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) LIST_HEAD(completions); struct lpfc_hba *phba = vport->phba; struct lpfc_iocbq *tmp_iocb, *piocb; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list, @@ -6481,19 +6463,13 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** - * lpfc_fabric_abort_nport: Abort a ndlp's iocbs from driver fabric iocb list. + * lpfc_fabric_abort_nport - Abort a ndlp's iocbs from driver fabric iocb list * @ndlp: pointer to a node-list data structure. * * This routine aborts all the IOCBs associated with an @ndlp from the @@ -6506,10 +6482,9 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) { LIST_HEAD(completions); - struct lpfc_hba *phba = ndlp->vport->phba; + struct lpfc_hba *phba = ndlp->phba; struct lpfc_iocbq *tmp_iocb, *piocb; struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING]; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list, @@ -6521,19 +6496,13 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** - * lpfc_fabric_abort_hba: Abort all iocbs on driver fabric iocb list. + * lpfc_fabric_abort_hba - Abort all iocbs on driver fabric iocb list * @phba: pointer to lpfc hba data structure. * * This routine aborts all the IOCBs currently on the driver internal @@ -6546,20 +6515,12 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) void lpfc_fabric_abort_hba(struct lpfc_hba *phba) { LIST_HEAD(completions); - struct lpfc_iocbq *piocb; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_splice_init(&phba->fabric_iocb_list, &completions); spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 311ed6d..e764ce0 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -78,7 +78,7 @@ lpfc_terminate_rport_io(struct fc_rport *rport) return; } - phba = ndlp->vport->phba; + phba = ndlp->phba; lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT, "rport terminate: sid:x%x did:x%x flg:x%x", @@ -276,7 +276,7 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) } /** - * lpfc_alloc_fast_evt: Allocates data structure for posting event. + * lpfc_alloc_fast_evt - Allocates data structure for posting event * @phba: Pointer to hba context object. * * This function is called from the functions which need to post @@ -303,7 +303,7 @@ lpfc_alloc_fast_evt(struct lpfc_hba *phba) { } /** - * lpfc_free_fast_evt: Frees event data structure. + * lpfc_free_fast_evt - Frees event data structure * @phba: Pointer to hba context object. * @evt: Event object which need to be freed. * @@ -319,7 +319,7 @@ lpfc_free_fast_evt(struct lpfc_hba *phba, } /** - * lpfc_send_fastpath_evt: Posts events generated from fast path. + * lpfc_send_fastpath_evt - Posts events generated from fast path * @phba: Pointer to hba context object. * @evtp: Event data structure. * @@ -1858,13 +1858,18 @@ lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) NLP_STE_UNUSED_NODE); } /** - * lpfc_initialize_node: Initialize all fields of node object. + * lpfc_initialize_node - Initialize all fields of node object * @vport: Pointer to Virtual Port object. * @ndlp: Pointer to FC node object. * @did: FC_ID of the node. - * This function is always called when node object need to - * be initialized. It initializes all the fields of the node - * object. + * + * This function is always called when node object need to be initialized. + * It initializes all the fields of the node object. Although the reference + * to phba from @ndlp can be obtained indirectly through it's reference to + * @vport, a direct reference to phba is taken here by @ndlp. This is due + * to the life-span of the @ndlp might go beyond the existence of @vport as + * the final release of ndlp is determined by its reference count. And, the + * operation on @ndlp needs the reference to phba. **/ static inline void lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, @@ -1877,6 +1882,7 @@ lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_delayfunc.data = (unsigned long)ndlp; ndlp->nlp_DID = did; ndlp->vport = vport; + ndlp->phba = vport->phba; ndlp->nlp_sid = NLP_NO_SID; kref_init(&ndlp->kref); NLP_INT_NODE_ACT(ndlp); @@ -2086,7 +2092,6 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) struct lpfc_sli *psli; struct lpfc_sli_ring *pring; struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *icmd; uint32_t rpi, i; lpfc_fabric_abort_nport(ndlp); @@ -2122,19 +2127,9 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) } } - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - icmd = &iocb->iocb; - icmd->ulpStatus = IOSTAT_LOCAL_REJECT; - icmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl)(phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); return 0; } @@ -2186,9 +2181,13 @@ lpfc_unreg_all_rpis(struct lpfc_vport *vport) mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); - if (rc == MBX_NOT_FINISHED) { + if (rc != MBX_TIMEOUT) mempool_free(mbox, phba->mbox_mem_pool); - } + + if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) + lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, + "1836 Could not issue " + "unreg_login(all_rpis) status %d\n", rc); } } @@ -2206,12 +2205,14 @@ lpfc_unreg_default_rpis(struct lpfc_vport *vport) mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); - if (rc == MBX_NOT_FINISHED) { + if (rc != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + + if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, "1815 Could not issue " - "unreg_did (default rpis)\n"); - mempool_free(mbox, phba->mbox_mem_pool); - } + "unreg_did (default rpis) status %d\n", + rc); } } @@ -2470,14 +2471,13 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did) if (ndlp->nlp_flag & NLP_RCV_PLOGI) return NULL; - spin_lock_irq(shost->host_lock); - ndlp->nlp_flag |= NLP_NPR_2B_DISC; - spin_unlock_irq(shost->host_lock); - /* Since this node is marked for discovery, * delay timeout is not needed. */ lpfc_cancel_retry_delay_tmo(vport, ndlp); + spin_lock_irq(shost->host_lock); + ndlp->nlp_flag |= NLP_NPR_2B_DISC; + spin_unlock_irq(shost->host_lock); } else ndlp = NULL; } else { @@ -2740,19 +2740,9 @@ lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - icmd = &iocb->iocb; - icmd->ulpStatus = IOSTAT_LOCAL_REJECT; - icmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } static void @@ -3173,7 +3163,7 @@ lpfc_nlp_release(struct kref *kref) lpfc_nlp_remove(ndlp->vport, ndlp); /* clear the ndlp active flag for all release cases */ - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); NLP_CLR_NODE_ACT(ndlp); spin_unlock_irqrestore(&phba->ndlp_lock, flags); @@ -3181,7 +3171,7 @@ lpfc_nlp_release(struct kref *kref) /* free ndlp memory for final ndlp release */ if (NLP_CHK_FREE_REQ(ndlp)) { kfree(ndlp->lat_data); - mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool); + mempool_free(ndlp, ndlp->phba->nlp_mem_pool); } } @@ -3204,7 +3194,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp) * ndlp reference count that is in the process of being * released. */ - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) { spin_unlock_irqrestore(&phba->ndlp_lock, flags); @@ -3240,7 +3230,7 @@ lpfc_nlp_put(struct lpfc_nodelist *ndlp) "node put: did:x%x flg:x%x refcnt:x%x", ndlp->nlp_DID, ndlp->nlp_flag, atomic_read(&ndlp->kref.refcount)); - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); /* Check the ndlp memory free acknowledge flag to avoid the * possible race condition that kref_put got invoked again diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 06874e6..86d1bdc 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -60,7 +60,7 @@ static struct scsi_transport_template *lpfc_vport_transport_template = NULL; static DEFINE_IDR(lpfc_hba_index); /** - * lpfc_config_port_prep: Perform lpfc initialization prior to config port. + * lpfc_config_port_prep - Perform lpfc initialization prior to config port * @phba: pointer to lpfc hba data structure. * * This routine will do LPFC initialization prior to issuing the CONFIG_PORT @@ -221,7 +221,7 @@ out_free_mbox: } /** - * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd. + * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -242,8 +242,7 @@ lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) } /** - * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox - * command used for getting wake up parameters. + * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -287,7 +286,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) } /** - * lpfc_config_port_post: Perform lpfc initialization after config port. + * lpfc_config_port_post - Perform lpfc initialization after config port * @phba: pointer to lpfc hba data structure. * * This routine will do LPFC initialization after the CONFIG_PORT mailbox @@ -303,6 +302,7 @@ int lpfc_config_port_post(struct lpfc_hba *phba) { struct lpfc_vport *vport = phba->pport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); LPFC_MBOXQ_t *pmb; MAILBOX_t *mb; struct lpfc_dmabuf *mp; @@ -360,6 +360,11 @@ lpfc_config_port_post(struct lpfc_hba *phba) sizeof (struct lpfc_name)); memcpy(&vport->fc_portname, &vport->fc_sparam.portName, sizeof (struct lpfc_name)); + + /* Update the fc_host data structures with new wwn. */ + fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn); + fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn); + /* If no serial number in VPD data, use low 6 bytes of WWNN */ /* This should be consolidated into parse_vpd ? - mr */ if (phba->SerialNumber[0] == 0) { @@ -551,7 +556,7 @@ lpfc_config_port_post(struct lpfc_hba *phba) } /** - * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset. + * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset * @phba: pointer to lpfc HBA data structure. * * This routine will do LPFC uninitialization before the HBA is reset when @@ -583,7 +588,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba) } /** - * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset. + * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset * @phba: pointer to lpfc HBA data structure. * * This routine will do uninitialization after the HBA is reset when bring @@ -599,8 +604,6 @@ lpfc_hba_down_post(struct lpfc_hba *phba) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; struct lpfc_dmabuf *mp, *next_mp; - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; LIST_HEAD(completions); int i; @@ -628,20 +631,9 @@ lpfc_hba_down_post(struct lpfc_hba *phba) pring->txcmplq_cnt = 0; spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, - list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); lpfc_sli_abort_iocb_ring(phba, pring); spin_lock_irq(&phba->hbalock); @@ -652,7 +644,7 @@ lpfc_hba_down_post(struct lpfc_hba *phba) } /** - * lpfc_hb_timeout: The HBA-timer timeout handler. + * lpfc_hb_timeout - The HBA-timer timeout handler * @ptr: unsigned long holds the pointer to lpfc hba data structure. * * This is the HBA-timer timeout handler registered to the lpfc driver. When @@ -686,7 +678,7 @@ lpfc_hb_timeout(unsigned long ptr) } /** - * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function. + * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -721,7 +713,7 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) } /** - * lpfc_hb_timeout_handler: The HBA-timer timeout handler. + * lpfc_hb_timeout_handler - The HBA-timer timeout handler * @phba: pointer to lpfc hba data structure. * * This is the actual HBA-timer timeout handler to be invoked by the worker @@ -830,7 +822,7 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba) } /** - * lpfc_offline_eratt: Bring lpfc offline on hardware error attention. + * lpfc_offline_eratt - Bring lpfc offline on hardware error attention * @phba: pointer to lpfc hba data structure. * * This routine is called to bring the HBA offline when HBA hardware error @@ -857,7 +849,73 @@ lpfc_offline_eratt(struct lpfc_hba *phba) } /** - * lpfc_handle_eratt: The HBA hardware error handler. + * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to handle the deferred HBA hardware error + * conditions. This type of error is indicated by HBA by setting ER1 + * and another ER bit in the host status register. The driver will + * wait until the ER1 bit clears before handling the error condition. + **/ +static void +lpfc_handle_deferred_eratt(struct lpfc_hba *phba) +{ + uint32_t old_host_status = phba->work_hs; + struct lpfc_sli_ring *pring; + struct lpfc_sli *psli = &phba->sli; + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0479 Deferred Adapter Hardware Error " + "Data: x%x x%x x%x\n", + phba->work_hs, + phba->work_status[0], phba->work_status[1]); + + spin_lock_irq(&phba->hbalock); + psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + spin_unlock_irq(&phba->hbalock); + + + /* + * Firmware stops when it triggred erratt. That could cause the I/Os + * dropped by the firmware. Error iocb (I/O) on txcmplq and let the + * SCSI layer retry it after re-establishing link. + */ + pring = &psli->ring[psli->fcp_ring]; + lpfc_sli_abort_iocb_ring(phba, pring); + + /* + * There was a firmware error. Take the hba offline and then + * attempt to restart it. + */ + lpfc_offline_prep(phba); + lpfc_offline(phba); + + /* Wait for the ER1 bit to clear.*/ + while (phba->work_hs & HS_FFER1) { + msleep(100); + phba->work_hs = readl(phba->HSregaddr); + /* If driver is unloading let the worker thread continue */ + if (phba->pport->load_flag & FC_UNLOADING) { + phba->work_hs = 0; + break; + } + } + + /* + * This is to ptrotect against a race condition in which + * first write to the host attention register clear the + * host status register. + */ + if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING))) + phba->work_hs = old_host_status & ~HS_FFER1; + + phba->hba_flag &= ~DEFER_ERATT; + phba->work_status[0] = readl(phba->MBslimaddr + 0xa8); + phba->work_status[1] = readl(phba->MBslimaddr + 0xac); +} + +/** + * lpfc_handle_eratt - The HBA hardware error handler * @phba: pointer to lpfc hba data structure. * * This routine is invoked to handle the following HBA hardware error @@ -895,6 +953,9 @@ lpfc_handle_eratt(struct lpfc_hba *phba) (char *) &board_event, LPFC_NL_VENDOR_ID); + if (phba->hba_flag & DEFER_ERATT) + lpfc_handle_deferred_eratt(phba); + if (phba->work_hs & HS_FFER6) { /* Re-establishing Link */ lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, @@ -976,7 +1037,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba) } /** - * lpfc_handle_latt: The HBA link event handler. + * lpfc_handle_latt - The HBA link event handler * @phba: pointer to lpfc hba data structure. * * This routine is invoked from the worker thread to handle a HBA host @@ -1063,7 +1124,7 @@ lpfc_handle_latt_err_exit: } /** - * lpfc_parse_vpd: Parse VPD (Vital Product Data). + * lpfc_parse_vpd - Parse VPD (Vital Product Data) * @phba: pointer to lpfc hba data structure. * @vpd: pointer to the vital product data. * @len: length of the vital product data in bytes. @@ -1213,7 +1274,7 @@ lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len) } /** - * lpfc_get_hba_model_desc: Retrieve HBA device model name and description. + * lpfc_get_hba_model_desc - Retrieve HBA device model name and description * @phba: pointer to lpfc hba data structure. * @mdp: pointer to the data structure to hold the derived model name. * @descp: pointer to the data structure to hold the derived description. @@ -1322,7 +1383,8 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) m = (typeof(m)){"LPe11000", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_ZEPHYR_DCSP: - m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"}; + m = (typeof(m)){"LP2105", max_speed, "PCIe"}; + GE = 1; break; case PCI_DEVICE_ID_ZMID: m = (typeof(m)){"LPe1150", max_speed, "PCIe"}; @@ -1392,7 +1454,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) } /** - * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring. + * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring * @phba: pointer to lpfc hba data structure. * @pring: pointer to a IOCB ring. * @cnt: the number of IOCBs to be posted to the IOCB ring. @@ -1493,7 +1555,7 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt) } /** - * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring. + * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring * @phba: pointer to lpfc hba data structure. * * This routine posts initial receive IOCB buffers to the ELS ring. The @@ -1518,7 +1580,7 @@ lpfc_post_rcv_buf(struct lpfc_hba *phba) #define S(N,V) (((V)<<(N))|((V)>>(32-(N)))) /** - * lpfc_sha_init: Set up initial array of hash table entries. + * lpfc_sha_init - Set up initial array of hash table entries * @HashResultPointer: pointer to an array as hash table. * * This routine sets up the initial values to the array of hash table entries @@ -1535,7 +1597,7 @@ lpfc_sha_init(uint32_t * HashResultPointer) } /** - * lpfc_sha_iterate: Iterate initial hash table with the working hash table. + * lpfc_sha_iterate - Iterate initial hash table with the working hash table * @HashResultPointer: pointer to an initial/result hash table. * @HashWorkingPointer: pointer to an working hash table. * @@ -1592,7 +1654,7 @@ lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer) } /** - * lpfc_challenge_key: Create challenge key based on WWPN of the HBA. + * lpfc_challenge_key - Create challenge key based on WWPN of the HBA * @RandomChallenge: pointer to the entry of host challenge random number array. * @HashWorking: pointer to the entry of the working hash array. * @@ -1608,7 +1670,7 @@ lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking) } /** - * lpfc_hba_init: Perform special handling for LC HBA initialization. + * lpfc_hba_init - Perform special handling for LC HBA initialization * @phba: pointer to lpfc hba data structure. * @hbainit: pointer to an array of unsigned 32-bit integers. * @@ -1637,7 +1699,7 @@ lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit) } /** - * lpfc_cleanup: Performs vport cleanups before deleting a vport. + * lpfc_cleanup - Performs vport cleanups before deleting a vport * @vport: pointer to a virtual N_Port data structure. * * This routine performs the necessary cleanups before deleting the @vport. @@ -1724,7 +1786,7 @@ lpfc_cleanup(struct lpfc_vport *vport) } /** - * lpfc_stop_vport_timers: Stop all the timers associated with a vport. + * lpfc_stop_vport_timers - Stop all the timers associated with a vport * @vport: pointer to a virtual N_Port data structure. * * This routine stops all the timers associated with a @vport. This function @@ -1741,7 +1803,7 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport) } /** - * lpfc_stop_phba_timers: Stop all the timers associated with an HBA. + * lpfc_stop_phba_timers - Stop all the timers associated with an HBA * @phba: pointer to lpfc hba data structure. * * This routine stops all the timers associated with a HBA. This function is @@ -1761,7 +1823,7 @@ lpfc_stop_phba_timers(struct lpfc_hba *phba) } /** - * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked. + * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked * @phba: pointer to lpfc hba data structure. * * This routine marks a HBA's management interface as blocked. Once the HBA's @@ -1781,7 +1843,7 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba) } /** - * lpfc_online: Initialize and bring a HBA online. + * lpfc_online - Initialize and bring a HBA online * @phba: pointer to lpfc hba data structure. * * This routine initializes the HBA and brings a HBA online. During this @@ -1839,7 +1901,7 @@ lpfc_online(struct lpfc_hba *phba) } /** - * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked. + * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked * @phba: pointer to lpfc hba data structure. * * This routine marks a HBA's management interface as not blocked. Once the @@ -1860,7 +1922,7 @@ lpfc_unblock_mgmt_io(struct lpfc_hba * phba) } /** - * lpfc_offline_prep: Prepare a HBA to be brought offline. + * lpfc_offline_prep - Prepare a HBA to be brought offline * @phba: pointer to lpfc hba data structure. * * This routine is invoked to prepare a HBA to be brought offline. It performs @@ -1917,7 +1979,7 @@ lpfc_offline_prep(struct lpfc_hba * phba) } /** - * lpfc_offline: Bring a HBA offline. + * lpfc_offline - Bring a HBA offline * @phba: pointer to lpfc hba data structure. * * This routine actually brings a HBA offline. It stops all the timers @@ -1962,7 +2024,7 @@ lpfc_offline(struct lpfc_hba *phba) } /** - * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists. + * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists * @phba: pointer to lpfc hba data structure. * * This routine is to free all the SCSI buffers and IOCBs from the driver @@ -2001,7 +2063,7 @@ lpfc_scsi_free(struct lpfc_hba *phba) } /** - * lpfc_create_port: Create an FC port. + * lpfc_create_port - Create an FC port * @phba: pointer to lpfc hba data structure. * @instance: a unique integer ID to this FC port. * @dev: pointer to the device data structure. @@ -2091,7 +2153,7 @@ out: } /** - * destroy_port: Destroy an FC port. + * destroy_port - destroy an FC port * @vport: pointer to an lpfc virtual N_Port data structure. * * This routine destroys a FC port from the upper layer protocol. All the @@ -2116,7 +2178,7 @@ destroy_port(struct lpfc_vport *vport) } /** - * lpfc_get_instance: Get a unique integer ID. + * lpfc_get_instance - Get a unique integer ID * * This routine allocates a unique integer ID from lpfc_hba_index pool. It * uses the kernel idr facility to perform the task. @@ -2139,7 +2201,7 @@ lpfc_get_instance(void) } /** - * lpfc_scan_finished: method for SCSI layer to detect whether scan is done. + * lpfc_scan_finished - method for SCSI layer to detect whether scan is done * @shost: pointer to SCSI host data structure. * @time: elapsed time of the scan in jiffies. * @@ -2197,7 +2259,7 @@ finished: } /** - * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port. + * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port * @shost: pointer to SCSI host data structure. * * This routine initializes a given SCSI host attributes on a FC port. The @@ -2252,7 +2314,7 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost) } /** - * lpfc_enable_msix: Enable MSI-X interrupt mode. + * lpfc_enable_msix - Enable MSI-X interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable the MSI-X interrupt vectors. The kernel @@ -2366,7 +2428,7 @@ msi_fail_out: } /** - * lpfc_disable_msix: Disable MSI-X interrupt mode. + * lpfc_disable_msix - Disable MSI-X interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to release the MSI-X vectors and then disable the @@ -2385,7 +2447,7 @@ lpfc_disable_msix(struct lpfc_hba *phba) } /** - * lpfc_enable_msi: Enable MSI interrupt mode. + * lpfc_enable_msi - Enable MSI interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable the MSI interrupt mode. The kernel @@ -2423,7 +2485,7 @@ lpfc_enable_msi(struct lpfc_hba *phba) } /** - * lpfc_disable_msi: Disable MSI interrupt mode. + * lpfc_disable_msi - Disable MSI interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to disable the MSI interrupt mode. The driver @@ -2441,7 +2503,7 @@ lpfc_disable_msi(struct lpfc_hba *phba) } /** - * lpfc_log_intr_mode: Log the active interrupt mode + * lpfc_log_intr_mode - Log the active interrupt mode * @phba: pointer to lpfc hba data structure. * @intr_mode: active interrupt mode adopted. * @@ -2490,7 +2552,7 @@ lpfc_stop_port(struct lpfc_hba *phba) } /** - * lpfc_enable_intr: Enable device interrupt. + * lpfc_enable_intr - Enable device interrupt * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable device interrupt and associate driver's @@ -2547,7 +2609,7 @@ lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode) } /** - * lpfc_disable_intr: Disable device interrupt. + * lpfc_disable_intr - Disable device interrupt * @phba: pointer to lpfc hba data structure. * * This routine is invoked to disable device interrupt and disassociate the @@ -2574,7 +2636,7 @@ lpfc_disable_intr(struct lpfc_hba *phba) } /** - * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem. + * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem * @pdev: pointer to PCI device * @pid: pointer to PCI device identifier * @@ -3010,7 +3072,7 @@ out: } /** - * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem. + * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem * @pdev: pointer to PCI device * * This routine is to be registered to the kernel's PCI subsystem. When an @@ -3033,8 +3095,6 @@ lpfc_pci_remove_one(struct pci_dev *pdev) lpfc_free_sysfs_attr(vport); - kthread_stop(phba->worker_thread); - /* Release all the vports against this physical port */ vports = lpfc_create_vport_work_array(phba); if (vports != NULL) @@ -3052,7 +3112,12 @@ lpfc_pci_remove_one(struct pci_dev *pdev) * clears the rings, discards all mailbox commands, and resets * the HBA. */ + + /* HBA interrupt will be diabled after this call */ lpfc_sli_hba_down(phba); + /* Stop kthread signal shall trigger work_done one more time */ + kthread_stop(phba->worker_thread); + /* Final cleanup of txcmplq and reset the HBA */ lpfc_sli_brdrestart(phba); lpfc_stop_phba_timers(phba); @@ -3095,7 +3160,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev) } /** - * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management. + * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management * @pdev: pointer to PCI device * @msg: power management message * @@ -3139,7 +3204,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg) } /** - * lpfc_pci_resume_one: lpfc PCI func to resume device for power management. + * lpfc_pci_resume_one - lpfc PCI func to resume device for power management * @pdev: pointer to PCI device * * This routine is to be registered to the kernel's PCI subsystem to support @@ -3204,7 +3269,7 @@ lpfc_pci_resume_one(struct pci_dev *pdev) } /** - * lpfc_io_error_detected: Driver method for handling PCI I/O error detected. + * lpfc_io_error_detected - Driver method for handling PCI I/O error detected * @pdev: pointer to PCI device. * @state: the current PCI connection state. * @@ -3254,7 +3319,7 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, } /** - * lpfc_io_slot_reset: Restart a PCI device from scratch. + * lpfc_io_slot_reset - Restart a PCI device from scratch * @pdev: pointer to PCI device. * * This routine is registered to the PCI subsystem for error handling. This is @@ -3313,7 +3378,7 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) } /** - * lpfc_io_resume: Resume PCI I/O operation. + * lpfc_io_resume - Resume PCI I/O operation * @pdev: pointer to PCI device * * This routine is registered to the PCI subsystem for error handling. It is @@ -3426,7 +3491,7 @@ static struct pci_driver lpfc_driver = { }; /** - * lpfc_init: lpfc module initialization routine. + * lpfc_init - lpfc module initialization routine * * This routine is to be invoked when the lpfc module is loaded into the * kernel. The special kernel macro module_init() is used to indicate the @@ -3472,7 +3537,7 @@ lpfc_init(void) } /** - * lpfc_exit: lpfc module removal routine. + * lpfc_exit - lpfc module removal routine * * This routine is invoked when the lpfc module is removed from the kernel. * The special kernel macro module_exit() is used to indicate the role of diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h index a85b7c1..1aa8570 100644 --- a/drivers/scsi/lpfc/lpfc_logmsg.h +++ b/drivers/scsi/lpfc/lpfc_logmsg.h @@ -27,7 +27,7 @@ #define LOG_FCP 0x40 /* FCP traffic history */ #define LOG_NODE 0x80 /* Node table events */ #define LOG_TEMP 0x100 /* Temperature sensor events */ -#define LOG_BG 0x200 /* BlockBuard events */ +#define LOG_BG 0x200 /* BlockGuard events */ #define LOG_MISC 0x400 /* Miscellaneous events */ #define LOG_SLI 0x800 /* SLI events */ #define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */ diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 34eeb08..134fc7f 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -39,7 +39,7 @@ #include "lpfc_compat.h" /** - * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory. + * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @offset: offset for dumping VPD memory mailbox command. @@ -77,9 +77,10 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset) } /** - * lpfc_dump_mem: Prepare a mailbox command for retrieving wakeup params. + * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. + * * This function create a dump memory mailbox command to dump wake up * parameters. */ @@ -109,7 +110,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param. + * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -132,7 +133,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_async: Prepare a mailbox command for enabling HBA async event. + * lpfc_config_async - Prepare a mailbox command for enabling HBA async event * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @ring: ring number for the asynchronous event to be configured. @@ -159,7 +160,7 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, } /** - * lpfc_heart_beat: Prepare a mailbox command for heart beat. + * lpfc_heart_beat - Prepare a mailbox command for heart beat * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -184,7 +185,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_read_la: Prepare a mailbox command for reading HBA link attention. + * lpfc_read_la - Prepare a mailbox command for reading HBA link attention * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @mp: DMA buffer memory for reading the link attention information into. @@ -228,7 +229,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp) } /** - * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention. + * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -257,7 +258,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA. + * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -305,7 +306,7 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_msi: Prepare a mailbox command for configuring msi-x. + * lpfc_config_msi - Prepare a mailbox command for configuring msi-x * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -383,7 +384,7 @@ lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA. + * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @topology: the link topology for the link to be initialized to. @@ -463,7 +464,7 @@ lpfc_init_link(struct lpfc_hba * phba, } /** - * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters. + * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @vpi: virtual N_Port identifier. @@ -523,7 +524,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) } /** - * lpfc_unreg_did: Prepare a mailbox command for unregistering DID. + * lpfc_unreg_did - Prepare a mailbox command for unregistering DID * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @did: remote port identifier. @@ -555,7 +556,7 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, } /** - * lpfc_read_config: Prepare a mailbox command for reading HBA configuration. + * lpfc_read_config - Prepare a mailbox command for reading HBA configuration * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -581,7 +582,7 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats. + * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -606,7 +607,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_reg_login: Prepare a mailbox command for registering remote login. + * lpfc_reg_login - Prepare a mailbox command for registering remote login * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @did: remote port identifier. @@ -677,7 +678,7 @@ lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, } /** - * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login. + * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @rpi: remote port identifier @@ -709,7 +710,7 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, } /** - * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier. + * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port). @@ -741,7 +742,7 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid, } /** - * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id. + * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @pmb: pointer to the driver internal queue element for mailbox command. @@ -771,7 +772,7 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) } /** - * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB) + * lpfc_config_pcb_setup - Set up IOCB rings in the Port Control Block (PCB) * @phba: pointer to lpfc hba data structure. * * This routine sets up and initializes the IOCB rings in the Port Control @@ -835,7 +836,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba) } /** - * lpfc_read_rev: Prepare a mailbox command for reading HBA revision. + * lpfc_read_rev - Prepare a mailbox command for reading HBA revision * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -861,7 +862,7 @@ lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2. + * lpfc_build_hbq_profile2 - Set up the HBQ Selection Profile 2 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -880,7 +881,7 @@ lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb, } /** - * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3. + * lpfc_build_hbq_profile3 - Set up the HBQ Selection Profile 3 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -902,7 +903,7 @@ lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb, } /** - * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5. + * lpfc_build_hbq_profile5 - Set up the HBQ Selection Profile 5 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -925,7 +926,7 @@ lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb, } /** - * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ. + * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ * @phba: pointer to lpfc hba data structure. * @id: HBQ identifier. * @hbq_desc: pointer to the HBA descriptor data structure. @@ -999,7 +1000,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id, } /** - * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring. + * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring * @phba: pointer to lpfc hba data structure. * @ring: * @pmb: pointer to the driver internal queue element for mailbox command. @@ -1057,7 +1058,7 @@ lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_port: Prepare a mailbox command for configuring port. + * lpfc_config_port - Prepare a mailbox command for configuring port * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -1227,7 +1228,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_kill_board: Prepare a mailbox command for killing board. + * lpfc_kill_board - Prepare a mailbox command for killing board * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -1253,7 +1254,7 @@ lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue. + * lpfc_mbox_put - Put a mailbox cmd into the tail of driver's mailbox queue * @phba: pointer to lpfc hba data structure. * @mbq: pointer to the driver internal queue element for mailbox command. * @@ -1277,7 +1278,7 @@ lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) } /** - * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue. + * lpfc_mbox_get - Remove a mailbox cmd from the head of driver's mailbox queue * @phba: pointer to lpfc hba data structure. * * Driver maintains a internal mailbox command queue implemented as a linked @@ -1304,7 +1305,7 @@ lpfc_mbox_get(struct lpfc_hba * phba) } /** - * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list. + * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list * @phba: pointer to lpfc hba data structure. * @mbq: pointer to the driver internal queue element for mailbox command. * @@ -1327,7 +1328,7 @@ lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) } /** - * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value. + * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value * @phba: pointer to lpfc hba data structure. * @cmd: mailbox command code. * diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index a4bba20..35a9767 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -41,7 +41,7 @@ /** - * lpfc_mem_alloc: create and allocate all PCI and memory pools + * lpfc_mem_alloc - create and allocate all PCI and memory pools * @phba: HBA to allocate pools for * * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool, @@ -136,12 +136,12 @@ lpfc_mem_alloc(struct lpfc_hba * phba) } /** - * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc + * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc * @phba: HBA to free memory for * * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, * lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and - * lpfc_nodelist. Also frees the VPI bitmask. + * lpfc_nodelist. Also frees the VPI bitmask * * Returns: None **/ @@ -212,7 +212,7 @@ lpfc_mem_free(struct lpfc_hba * phba) } /** - * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool + * lpfc_mbuf_alloc - Allocate an mbuf from the lpfc_mbuf_pool PCI pool * @phba: HBA which owns the pool to allocate from * @mem_flags: indicates if this is a priority (MEM_PRI) allocation * @handle: used to return the DMA-mapped address of the mbuf @@ -249,7 +249,7 @@ lpfc_mbuf_alloc(struct lpfc_hba *phba, int mem_flags, dma_addr_t *handle) } /** - * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked) + * __lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (locked) * @phba: HBA which owns the pool to return to * @virt: mbuf to free * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed @@ -278,7 +278,7 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) } /** - * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked) + * lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked) * @phba: HBA which owns the pool to return to * @virt: mbuf to free * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed @@ -291,7 +291,6 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) * Returns: None **/ void - lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) { unsigned long iflags; @@ -303,7 +302,7 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) } /** - * lpfc_els_hbq_alloc: Allocate an HBQ buffer + * lpfc_els_hbq_alloc - Allocate an HBQ buffer * @phba: HBA to allocate HBQ buffer for * * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI @@ -335,7 +334,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba) } /** - * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc + * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc * @phba: HBA buffer was allocated for * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc * @@ -355,7 +354,7 @@ lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp) } /** - * lpfc_in_buf_free: Free a DMA buffer + * lpfc_in_buf_free - Free a DMA buffer * @phba: HBA buffer is associated with * @mp: Buffer to free * diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 8f548ad..08cdc77 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -192,7 +192,6 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING]; struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *cmd; /* Abort outstanding I/O on NPort <nlp_DID> */ lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_DISCOVERY, @@ -223,19 +222,10 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); + lpfc_cancel_retry_delay_tmo(phba->pport, ndlp); return 0; } diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 36fd2e7..167b66d 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -112,7 +112,7 @@ lpfc_debug_save_dif(struct scsi_cmnd *cmnd) } /** - * lpfc_update_stats: Update statistical data for the command completion. + * lpfc_update_stats - Update statistical data for the command completion * @phba: Pointer to HBA object. * @lpfc_cmd: lpfc scsi command object pointer. * @@ -165,8 +165,7 @@ lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) } /** - * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change - * event. + * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event * @phba: Pointer to HBA context object. * @vport: Pointer to vport object. * @ndlp: Pointer to FC node associated with the target. @@ -220,7 +219,7 @@ lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba, } /** - * lpfc_rampdown_queue_depth: Post RAMP_DOWN_QUEUE event to worker thread. + * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread * @phba: The Hba for which this call is being executed. * * This routine is called when there is resource error in driver or firmware. @@ -261,7 +260,7 @@ lpfc_rampdown_queue_depth(struct lpfc_hba *phba) } /** - * lpfc_rampup_queue_depth: Post RAMP_UP_QUEUE event for worker thread. + * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread * @phba: The Hba for which this call is being executed. * * This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine @@ -273,14 +272,14 @@ lpfc_rampdown_queue_depth(struct lpfc_hba *phba) **/ static inline void lpfc_rampup_queue_depth(struct lpfc_vport *vport, - struct scsi_device *sdev) + uint32_t queue_depth) { unsigned long flags; struct lpfc_hba *phba = vport->phba; uint32_t evt_posted; atomic_inc(&phba->num_cmd_success); - if (vport->cfg_lun_queue_depth <= sdev->queue_depth) + if (vport->cfg_lun_queue_depth <= queue_depth) return; spin_lock_irqsave(&phba->hbalock, flags); if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) || @@ -303,7 +302,7 @@ lpfc_rampup_queue_depth(struct lpfc_vport *vport, } /** - * lpfc_ramp_down_queue_handler: WORKER_RAMP_DOWN_QUEUE event handler. + * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler * @phba: The Hba for which this call is being executed. * * This routine is called to process WORKER_RAMP_DOWN_QUEUE event for worker @@ -361,7 +360,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) } /** - * lpfc_ramp_up_queue_handler: WORKER_RAMP_UP_QUEUE event handler. + * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler * @phba: The Hba for which this call is being executed. * * This routine is called to process WORKER_RAMP_UP_QUEUE event for worker @@ -410,7 +409,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) } /** - * lpfc_scsi_dev_block: set all scsi hosts to block state. + * lpfc_scsi_dev_block - set all scsi hosts to block state * @phba: Pointer to HBA context object. * * This function walks vport list and set each SCSI host to block state @@ -439,7 +438,7 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba) } /** - * lpfc_new_scsi_buf: Scsi buffer allocator. + * lpfc_new_scsi_buf - Scsi buffer allocator * @vport: The virtual port for which this call being executed. * * This routine allocates a scsi buffer, which contains all the necessary @@ -563,7 +562,7 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport) } /** - * lpfc_get_scsi_buf: Get a scsi buffer from lpfc_scsi_buf_list list of Hba. + * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba * @phba: The Hba for which this call is being executed. * * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list @@ -592,7 +591,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba) } /** - * lpfc_release_scsi_buf: Return a scsi buffer back to hba lpfc_scsi_buf_list list. + * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list * @phba: The Hba for which this call is being executed. * @psb: The scsi buffer which is being released. * @@ -611,7 +610,7 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) } /** - * lpfc_scsi_prep_dma_buf: Routine to do DMA mapping for scsi buffer. + * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer * @phba: The Hba for which this call is being executed. * @lpfc_cmd: The scsi buffer which is going to be mapped. * @@ -738,7 +737,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) * Due to difference in data length between DIF/non-DIF paths, * we need to set word 4 of IOCB here */ - iocb_cmd->un.fcpi.fcpi_parm = le32_to_cpu(scsi_bufflen(scsi_cmnd)); + iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd); return 0; } @@ -823,9 +822,9 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc) /** * lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command * @sc: in: SCSI command - * @apptagmask out: app tag mask - * @apptagval out: app tag value - * @reftag out: ref tag (reference tag) + * @apptagmask: out: app tag mask + * @apptagval: out: app tag value + * @reftag: out: ref tag (reference tag) * * Description: * Extract DIF paramters from the command if possible. Otherwise, @@ -1413,7 +1412,7 @@ out: } /** - * lpfc_send_scsi_error_event: Posts an event when there is SCSI error. + * lpfc_send_scsi_error_event - Posts an event when there is SCSI error * @phba: Pointer to hba context object. * @vport: Pointer to vport object. * @lpfc_cmd: Pointer to lpfc scsi command which reported the error. @@ -1505,7 +1504,7 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport, } /** - * lpfc_scsi_unprep_dma_buf: Routine to un-map DMA mapping of scatter gather. + * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather * @phba: The Hba for which this call is being executed. * @psb: The scsi buffer which is going to be un-mapped. * @@ -1530,7 +1529,7 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) } /** - * lpfc_handler_fcp_err: FCP response handler. + * lpfc_handler_fcp_err - FCP response handler * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @rsp_iocb: The response IOCB which contains FCP error. @@ -1674,7 +1673,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /** - * lpfc_scsi_cmd_iocb_cmpl: Scsi cmnd IOCB completion routine. + * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine * @phba: The Hba for which this call is being executed. * @pIocbIn: The command IOCBQ for the scsi cmnd. * @pIocbOut: The response IOCBQ for the scsi cmnd . @@ -1694,10 +1693,12 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, struct lpfc_nodelist *pnode = rdata->pnode; struct scsi_cmnd *cmd = lpfc_cmd->pCmd; int result; - struct scsi_device *sdev, *tmp_sdev; + struct scsi_device *tmp_sdev; int depth = 0; unsigned long flags; struct lpfc_fast_path_event *fast_path_evt; + struct Scsi_Host *shost = cmd->device->host; + uint32_t queue_depth, scsi_id; lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; lpfc_cmd->status = pIocbOut->iocb.ulpStatus; @@ -1808,11 +1809,10 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, lpfc_update_stats(phba, lpfc_cmd); result = cmd->result; - sdev = cmd->device; if (vport->cfg_max_scsicmpl_time && time_after(jiffies, lpfc_cmd->start_time + msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) { - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); if (pnode && NLP_CHK_NODE_ACT(pnode)) { if (pnode->cmd_qdepth > atomic_read(&pnode->cmd_pending) && @@ -1825,22 +1825,26 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, pnode->last_change_time = jiffies; } - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); } else if (pnode && NLP_CHK_NODE_ACT(pnode)) { if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) && time_after(jiffies, pnode->last_change_time + msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) { - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); pnode->cmd_qdepth += pnode->cmd_qdepth * LPFC_TGTQ_RAMPUP_PCENT / 100; if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH) pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; pnode->last_change_time = jiffies; - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); } } lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); + + /* The sdev is not guaranteed to be valid post scsi_done upcall. */ + queue_depth = cmd->device->queue_depth; + scsi_id = cmd->device->id; cmd->scsi_done(cmd); if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { @@ -1848,28 +1852,28 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, * If there is a thread waiting for command completion * wake up the thread. */ - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); lpfc_cmd->pCmd = NULL; if (lpfc_cmd->waitq) wake_up(lpfc_cmd->waitq); - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); lpfc_release_scsi_buf(phba, lpfc_cmd); return; } if (!result) - lpfc_rampup_queue_depth(vport, sdev); + lpfc_rampup_queue_depth(vport, queue_depth); if (!result && pnode && NLP_CHK_NODE_ACT(pnode) && ((jiffies - pnode->last_ramp_up_time) > LPFC_Q_RAMP_UP_INTERVAL * HZ) && ((jiffies - pnode->last_q_full_time) > LPFC_Q_RAMP_UP_INTERVAL * HZ) && - (vport->cfg_lun_queue_depth > sdev->queue_depth)) { - shost_for_each_device(tmp_sdev, sdev->host) { + (vport->cfg_lun_queue_depth > queue_depth)) { + shost_for_each_device(tmp_sdev, shost) { if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){ - if (tmp_sdev->id != sdev->id) + if (tmp_sdev->id != scsi_id) continue; if (tmp_sdev->ordered_tags) scsi_adjust_queue_depth(tmp_sdev, @@ -1885,7 +1889,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, } lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode, 0xFFFFFFFF, - sdev->queue_depth - 1, sdev->queue_depth); + queue_depth , queue_depth + 1); } /* @@ -1896,8 +1900,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, NLP_CHK_NODE_ACT(pnode)) { pnode->last_q_full_time = jiffies; - shost_for_each_device(tmp_sdev, sdev->host) { - if (tmp_sdev->id != sdev->id) + shost_for_each_device(tmp_sdev, shost) { + if (tmp_sdev->id != scsi_id) continue; depth = scsi_track_queue_full(tmp_sdev, tmp_sdev->queue_depth - 1); @@ -1909,7 +1913,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, * scsi_track_queue_full. */ if (depth == -1) - depth = sdev->host->cmd_per_lun; + depth = shost->cmd_per_lun; if (depth) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, @@ -1925,17 +1929,17 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, * If there is a thread waiting for command completion * wake up the thread. */ - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); lpfc_cmd->pCmd = NULL; if (lpfc_cmd->waitq) wake_up(lpfc_cmd->waitq); - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); lpfc_release_scsi_buf(phba, lpfc_cmd); } /** - * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB. + * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB * @data: A pointer to the immediate command data portion of the IOCB. * @fcp_cmnd: The FCP Command that is provided by the SCSI layer. * @@ -1953,7 +1957,7 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd) } /** - * lpfc_scsi_prep_cmnd: Routine to convert scsi cmnd to FCP information unit. + * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: The scsi command which needs to send. * @pnode: Pointer to lpfc_nodelist. @@ -2047,7 +2051,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /** - * lpfc_scsi_prep_task_mgmt_cmnd: Convert scsi TM cmnd to FCP information unit. + * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @lun: Logical unit number. @@ -2110,7 +2114,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, } /** - * lpc_taskmgmt_def_cmpl: IOCB completion routine for task management command. + * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command * @phba: The Hba for which this call is being executed. * @cmdiocbq: Pointer to lpfc_iocbq data structure. * @rspiocbq: Pointer to lpfc_iocbq data structure. @@ -2131,7 +2135,7 @@ lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba, } /** - * lpfc_scsi_tgt_reset: Target reset handler. + * lpfc_scsi_tgt_reset - Target reset handler * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure * @vport: The virtual port for which this call is being executed. * @tgt_id: Target ID. @@ -2198,7 +2202,7 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport, } /** - * lpfc_info: Info entry point of scsi_host_template data structure. + * lpfc_info - Info entry point of scsi_host_template data structure * @host: The scsi host for which this call is being executed. * * This routine provides module information about hba. @@ -2236,7 +2240,7 @@ lpfc_info(struct Scsi_Host *host) } /** - * lpfc_poll_rearm_time: Routine to modify fcp_poll timer of hba. + * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba * @phba: The Hba for which this call is being executed. * * This routine modifies fcp_poll_timer field of @phba by cfg_poll_tmo. @@ -2253,7 +2257,7 @@ static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba) } /** - * lpfc_poll_start_timer: Routine to start fcp_poll_timer of HBA. + * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA * @phba: The Hba for which this call is being executed. * * This routine starts the fcp_poll_timer of @phba. @@ -2264,7 +2268,7 @@ void lpfc_poll_start_timer(struct lpfc_hba * phba) } /** - * lpfc_poll_timeout: Restart polling timer. + * lpfc_poll_timeout - Restart polling timer * @ptr: Map to lpfc_hba data structure pointer. * * This routine restarts fcp_poll timer, when FCP ring polling is enable @@ -2283,8 +2287,7 @@ void lpfc_poll_timeout(unsigned long ptr) } /** - * lpfc_queuecommand: Queuecommand entry point of Scsi Host Templater data - * structure. + * lpfc_queuecommand - scsi_host_template queuecommand entry point * @cmnd: Pointer to scsi_cmnd data structure. * @done: Pointer to done routine. * @@ -2450,7 +2453,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) } /** - * lpfc_block_error_handler: Routine to block error handler. + * lpfc_block_error_handler - Routine to block error handler * @cmnd: Pointer to scsi_cmnd data structure. * * This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD. @@ -2472,8 +2475,7 @@ lpfc_block_error_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_abort_handler: Eh_abort_handler entry point of Scsi Host Template data - *structure. + * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine aborts @cmnd pending in base driver. @@ -2578,8 +2580,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_device_reset_handler: eh_device_reset entry point of Scsi Host Template - *data structure. + * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine does a device reset by sending a TARGET_RESET task management @@ -2587,7 +2588,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) * * Return code : * 0x2003 - Error - * 0ex2002 - Success + * 0x2002 - Success **/ static int lpfc_device_reset_handler(struct scsi_cmnd *cmnd) @@ -2707,8 +2708,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_bus_reset_handler: eh_bus_reset_handler entry point of Scsi Host - * Template data structure. + * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine does target reset to all target on @cmnd->device->host. @@ -2808,8 +2808,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_slave_alloc: slave_alloc entry point of Scsi Host Template data - * structure. + * lpfc_slave_alloc - scsi_host_template slave_alloc entry point * @sdev: Pointer to scsi_device. * * This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's @@ -2883,8 +2882,7 @@ lpfc_slave_alloc(struct scsi_device *sdev) } /** - * lpfc_slave_configure: slave_configure entry point of Scsi Host Templater data - * structure. + * lpfc_slave_configure - scsi_host_template slave_configure entry point * @sdev: Pointer to scsi_device. * * This routine configures following items @@ -2925,7 +2923,7 @@ lpfc_slave_configure(struct scsi_device *sdev) } /** - * lpfc_slave_destroy: slave_destroy entry point of SHT data structure. + * lpfc_slave_destroy - slave_destroy entry point of SHT data structure * @sdev: Pointer to scsi_device. * * This routine sets @sdev hostatdata filed to null. diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index a36a120..eb5c75c 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -68,7 +68,7 @@ typedef enum _lpfc_iocb_type { } lpfc_iocb_type; /** - * lpfc_cmd_iocb: Get next command iocb entry in the ring. + * lpfc_cmd_iocb - Get next command iocb entry in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -85,7 +85,7 @@ lpfc_cmd_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_resp_iocb: Get next response iocb entry in the ring. + * lpfc_resp_iocb - Get next response iocb entry in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -102,7 +102,7 @@ lpfc_resp_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * __lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * __lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool * @phba: Pointer to HBA context object. * * This function is called with hbalock held. This function @@ -121,7 +121,7 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba) } /** - * lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool * @phba: Pointer to HBA context object. * * This function is called with no lock held. This function @@ -142,7 +142,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba) } /** - * __lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * __lpfc_sli_release_iocbq - Release iocb to the iocb pool * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -164,7 +164,7 @@ __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) } /** - * lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * lpfc_sli_release_iocbq - Release iocb to the iocb pool * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -185,8 +185,40 @@ lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) } /** - * lpfc_sli_iocb_cmd_type: Get the iocb type. - * @iocb_cmnd : iocb command code. + * lpfc_sli_cancel_iocbs - Cancel all iocbs from a list. + * @phba: Pointer to HBA context object. + * @iocblist: List of IOCBs. + * @ulpstatus: ULP status in IOCB command field. + * @ulpWord4: ULP word-4 in IOCB command field. + * + * This function is called with a list of IOCBs to cancel. It cancels the IOCB + * on the list by invoking the complete callback function associated with the + * IOCB with the provided @ulpstatus and @ulpword4 set to the IOCB commond + * fields. + **/ +void +lpfc_sli_cancel_iocbs(struct lpfc_hba *phba, struct list_head *iocblist, + uint32_t ulpstatus, uint32_t ulpWord4) +{ + struct lpfc_iocbq *piocb; + + while (!list_empty(iocblist)) { + list_remove_head(iocblist, piocb, struct lpfc_iocbq, list); + + if (!piocb->iocb_cmpl) + lpfc_sli_release_iocbq(phba, piocb); + else { + piocb->iocb.ulpStatus = ulpstatus; + piocb->iocb.un.ulpWord[4] = ulpWord4; + (piocb->iocb_cmpl) (phba, piocb, piocb); + } + } + return; +} + +/** + * lpfc_sli_iocb_cmd_type - Get the iocb type + * @iocb_cmnd: iocb command code. * * This function is called by ring event handler function to get the iocb type. * This function translates the iocb command to an iocb command type used to @@ -295,7 +327,7 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd) } /** - * lpfc_sli_ring_map: Issue config_ring mbox for all rings. + * lpfc_sli_ring_map - Issue config_ring mbox for all rings * @phba: Pointer to HBA context object. * * This function is called from SLI initialization code @@ -338,7 +370,7 @@ lpfc_sli_ring_map(struct lpfc_hba *phba) } /** - * lpfc_sli_ringtxcmpl_put: Adds new iocb to the txcmplq. + * lpfc_sli_ringtxcmpl_put - Adds new iocb to the txcmplq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to the driver iocb object. @@ -370,7 +402,7 @@ lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_ringtx_get: Get first element of the txq. + * lpfc_sli_ringtx_get - Get first element of the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -391,7 +423,7 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_next_iocb_slot: Get next iocb slot in the ring. + * lpfc_sli_next_iocb_slot - Get next iocb slot in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -445,7 +477,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_next_iotag: Get an iotag for the iocb. + * lpfc_sli_next_iotag - Get an iotag for the iocb * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -520,7 +552,7 @@ lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) } /** - * lpfc_sli_submit_iocb: Submit an iocb to the firmware. + * lpfc_sli_submit_iocb - Submit an iocb to the firmware * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @iocb: Pointer to iocb slot in the ring. @@ -577,7 +609,7 @@ lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_update_full_ring: Update the chip attention register. + * lpfc_sli_update_full_ring - Update the chip attention register * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -608,7 +640,7 @@ lpfc_sli_update_full_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_update_ring: Update chip attention register. + * lpfc_sli_update_ring - Update chip attention register * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -632,7 +664,7 @@ lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_resume_iocb: Process iocbs in the txq. + * lpfc_sli_resume_iocb - Process iocbs in the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -672,7 +704,7 @@ lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_next_hbq_slot: Get next hbq entry for the HBQ. + * lpfc_sli_next_hbq_slot - Get next hbq entry for the HBQ * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @@ -717,7 +749,7 @@ lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno) } /** - * lpfc_sli_hbqbuf_free_all: Free all the hbq buffers. + * lpfc_sli_hbqbuf_free_all - Free all the hbq buffers * @phba: Pointer to HBA context object. * * This function is called with no lock held to free all the @@ -771,7 +803,7 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba) } /** - * lpfc_sli_hbq_to_firmware: Post the hbq buffer to firmware. + * lpfc_sli_hbq_to_firmware - Post the hbq buffer to firmware * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @hbq_buf: Pointer to HBQ buffer. @@ -818,8 +850,8 @@ static struct lpfc_hbq_init lpfc_els_hbq = { .profile = 0, .ring_mask = (1 << LPFC_ELS_RING), .buffer_count = 0, - .init_count = 20, - .add_count = 5, + .init_count = 40, + .add_count = 40, }; /* HBQ for the extra ring if needed */ @@ -841,7 +873,7 @@ struct lpfc_hbq_init *lpfc_hbq_defs[] = { }; /** - * lpfc_sli_hbqbuf_fill_hbqs: Post more hbq buffers to HBQ. + * lpfc_sli_hbqbuf_fill_hbqs - Post more hbq buffers to HBQ * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @count: Number of HBQ buffers to be posted. @@ -901,7 +933,7 @@ err: } /** - * lpfc_sli_hbqbuf_add_hbqs: Post more HBQ buffers to firmware. + * lpfc_sli_hbqbuf_add_hbqs - Post more HBQ buffers to firmware * @phba: Pointer to HBA context object. * @qno: HBQ number. * @@ -917,7 +949,7 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) } /** - * lpfc_sli_hbqbuf_init_hbqs: Post initial buffers to the HBQ. + * lpfc_sli_hbqbuf_init_hbqs - Post initial buffers to the HBQ * @phba: Pointer to HBA context object. * @qno: HBQ queue number. * @@ -933,7 +965,7 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno) } /** - * lpfc_sli_hbqbuf_find: Find the hbq buffer associated with a tag. + * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag * @phba: Pointer to HBA context object. * @tag: Tag of the hbq buffer. * @@ -966,7 +998,7 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag) } /** - * lpfc_sli_free_hbq: Give back the hbq buffer to firmware. + * lpfc_sli_free_hbq - Give back the hbq buffer to firmware * @phba: Pointer to HBA context object. * @hbq_buffer: Pointer to HBQ buffer. * @@ -988,7 +1020,7 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer) } /** - * lpfc_sli_chk_mbx_command: Check if the mailbox is a legitimate mailbox. + * lpfc_sli_chk_mbx_command - Check if the mailbox is a legitimate mailbox * @mbxCommand: mailbox command code. * * This function is called by the mailbox event handler function to verify @@ -1064,8 +1096,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) } /** - * lpfc_sli_wake_mbox_wait: Completion handler for mbox issued from - * lpfc_sli_issue_mbox_wait. + * lpfc_sli_wake_mbox_wait - lpfc_sli_issue_mbox_wait mbox completion handler * @phba: Pointer to HBA context object. * @pmboxq: Pointer to mailbox command. * @@ -1096,7 +1127,7 @@ lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) /** - * lpfc_sli_def_mbox_cmpl: Default mailbox completion handler. + * lpfc_sli_def_mbox_cmpl - Default mailbox completion handler * @phba: Pointer to HBA context object. * @pmb: Pointer to mailbox object. * @@ -1140,7 +1171,7 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_sli_handle_mb_event: Handle mailbox completions from firmware. + * lpfc_sli_handle_mb_event - Handle mailbox completions from firmware * @phba: Pointer to HBA context object. * * This function is called with no lock held. This function processes all @@ -1260,7 +1291,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) } /** - * lpfc_sli_get_buff: Get the buffer associated with the buffer tag. + * lpfc_sli_get_buff - Get the buffer associated with the buffer tag * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @tag: buffer tag. @@ -1288,7 +1319,7 @@ lpfc_sli_get_buff(struct lpfc_hba *phba, /** - * lpfc_sli_process_unsol_iocb: Unsolicited iocb handler. + * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @saveq: Pointer to the unsolicited iocb. @@ -1484,7 +1515,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_iocbq_lookup: Find command iocb for the given response iocb. + * lpfc_sli_iocbq_lookup - Find command iocb for the given response iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @prspiocb: Pointer to response iocb object. @@ -1521,7 +1552,7 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba, } /** - * lpfc_sli_process_sol_iocb: process solicited iocb completion. + * lpfc_sli_process_sol_iocb - process solicited iocb completion * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @saveq: Pointer to the response iocb to be processed. @@ -1597,7 +1628,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, * Ring <ringno> handler: unexpected completion IoTag * <IoTag> */ - lpfc_printf_vlog(cmdiocbp->vport, KERN_WARNING, LOG_SLI, + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, "0322 Ring %d handler: " "unexpected completion IoTag x%x " "Data: x%x x%x x%x x%x\n", @@ -1614,7 +1645,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_rsp_pointers_error: Response ring pointer error handler. + * lpfc_sli_rsp_pointers_error - Response ring pointer error handler * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -1652,7 +1683,7 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_poll_eratt: Error attention polling timer timeout handler. + * lpfc_poll_eratt - Error attention polling timer timeout handler * @ptr: Pointer to address of HBA context object. * * This function is invoked by the Error Attention polling timer when the @@ -1682,7 +1713,7 @@ void lpfc_poll_eratt(unsigned long ptr) } /** - * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode. + * lpfc_sli_poll_fcp_ring - Handle FCP ring completion in polling mode * @phba: Pointer to HBA context object. * * This function is called from lpfc_queuecommand, lpfc_poll_timeout, @@ -1845,7 +1876,7 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) } /** - * lpfc_sli_handle_fast_ring_event: Handle ring events on FCP ring. + * lpfc_sli_handle_fast_ring_event - Handle ring events on FCP ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mask: Host attention register mask for this ring. @@ -2037,7 +2068,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba, } /** - * lpfc_sli_handle_slow_ring_event: Handle ring events for non-FCP rings. + * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mask: Host attention register mask for this ring. @@ -2311,7 +2342,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, } /** - * lpfc_sli_abort_iocb_ring: Abort all iocbs in the ring. + * lpfc_sli_abort_iocb_ring - Abort all iocbs in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -2325,7 +2356,6 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { LIST_HEAD(completions); struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *cmd = NULL; if (pring->ringno == LPFC_ELS_RING) { lpfc_fabric_abort_hba(phba); @@ -2344,23 +2374,13 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** - * lpfc_sli_flush_fcp_rings: flush all iocbs in the fcp ring. + * lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring * @phba: Pointer to HBA context object. * * This function flushes all iocbs in the fcp ring and frees all the iocb @@ -2374,8 +2394,6 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba) { LIST_HEAD(txq); LIST_HEAD(txcmplq); - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; @@ -2393,38 +2411,16 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); /* Flush the txq */ - while (!list_empty(&txq)) { - iocb = list_get_first(&txq, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); /* Flush the txcmpq */ - while (!list_empty(&txcmplq)) { - iocb = list_get_first(&txcmplq, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); } /** - * lpfc_sli_brdready: Check for host status bits. + * lpfc_sli_brdready - Check for host status bits * @phba: Pointer to HBA context object. * @mask: Bit mask to be checked. * @@ -2484,7 +2480,7 @@ lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask) #define BARRIER_TEST_PATTERN (0xdeadbeef) /** - * lpfc_reset_barrier: Make HBA ready for HBA reset. + * lpfc_reset_barrier - Make HBA ready for HBA reset * @phba: Pointer to HBA context object. * * This function is called before resetting an HBA. This @@ -2564,7 +2560,7 @@ restore_hc: } /** - * lpfc_sli_brdkill: Issue a kill_board mailbox command. + * lpfc_sli_brdkill - Issue a kill_board mailbox command * @phba: Pointer to HBA context object. * * This function issues a kill_board mailbox command and waits for @@ -2651,7 +2647,7 @@ lpfc_sli_brdkill(struct lpfc_hba *phba) } /** - * lpfc_sli_brdreset: Reset the HBA. + * lpfc_sli_brdreset - Reset the HBA * @phba: Pointer to HBA context object. * * This function resets the HBA by writing HC_INITFF to the control @@ -2714,7 +2710,7 @@ lpfc_sli_brdreset(struct lpfc_hba *phba) } /** - * lpfc_sli_brdrestart: Restart the HBA. + * lpfc_sli_brdrestart - Restart the HBA * @phba: Pointer to HBA context object. * * This function is called in the SLI initialization code path to @@ -2781,7 +2777,7 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba) } /** - * lpfc_sli_chipset_init: Wait for the restart of the HBA after a restart. + * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart * @phba: Pointer to HBA context object. * * This function is called after a HBA restart to wait for successful @@ -2876,7 +2872,7 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) } /** - * lpfc_sli_hbq_count: Get the number of HBQs to be configured. + * lpfc_sli_hbq_count - Get the number of HBQs to be configured * * This function calculates and returns the number of HBQs required to be * configured. @@ -2888,7 +2884,7 @@ lpfc_sli_hbq_count(void) } /** - * lpfc_sli_hbq_entry_count: Calculate total number of hbq entries. + * lpfc_sli_hbq_entry_count - Calculate total number of hbq entries * * This function adds the number of hbq entries in every HBQ to get * the total number of hbq entries required for the HBA and returns @@ -2907,7 +2903,7 @@ lpfc_sli_hbq_entry_count(void) } /** - * lpfc_sli_hbq_size: Calculate memory required for all hbq entries. + * lpfc_sli_hbq_size - Calculate memory required for all hbq entries * * This function calculates amount of memory required for all hbq entries * to be configured and returns the total memory required. @@ -2919,7 +2915,7 @@ lpfc_sli_hbq_size(void) } /** - * lpfc_sli_hbq_setup: configure and initialize HBQs. + * lpfc_sli_hbq_setup - configure and initialize HBQs * @phba: Pointer to HBA context object. * * This function is called during the SLI initialization to configure @@ -2988,7 +2984,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba) } /** - * lpfc_sli_config_port: Issue config port mailbox command. + * lpfc_sli_config_port - Issue config port mailbox command * @phba: Pointer to HBA context object. * @sli_mode: sli mode - 2/3 * @@ -3114,7 +3110,7 @@ do_prep_failed: /** - * lpfc_sli_hba_setup: SLI intialization function. + * lpfc_sli_hba_setup - SLI intialization function * @phba: Pointer to HBA context object. * * This function is the main SLI intialization function. This function @@ -3206,7 +3202,7 @@ lpfc_sli_hba_setup_error: /** - * lpfc_mbox_timeout: Timeout call back function for mbox timer. + * lpfc_mbox_timeout - Timeout call back function for mbox timer * @ptr: context object - pointer to hba structure. * * This is the callback function for mailbox timer. The mailbox @@ -3237,7 +3233,7 @@ lpfc_mbox_timeout(unsigned long ptr) /** - * lpfc_mbox_timeout_handler: Worker thread function to handle mailbox timeout. + * lpfc_mbox_timeout_handler - Worker thread function to handle mailbox timeout * @phba: Pointer to HBA context object. * * This function is called from worker thread when a mailbox command times out. @@ -3252,6 +3248,21 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; + /* Check the pmbox pointer first. There is a race condition + * between the mbox timeout handler getting executed in the + * worklist and the mailbox actually completing. When this + * race condition occurs, the mbox_active will be NULL. + */ + spin_lock_irq(&phba->hbalock); + if (pmbox == NULL) { + lpfc_printf_log(phba, KERN_WARNING, + LOG_MBOX | LOG_SLI, + "0353 Active Mailbox cleared - mailbox timeout " + "exiting\n"); + spin_unlock_irq(&phba->hbalock); + return; + } + /* Mbox cmd <mbxCommand> timeout */ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "0310 Mailbox command x%x timeout Data: x%x x%x x%p\n", @@ -3259,6 +3270,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) phba->pport->port_state, phba->sli.sli_flag, phba->sli.mbox_active); + spin_unlock_irq(&phba->hbalock); /* Setting state unknown so lpfc_sli_abort_iocb_ring * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing @@ -3295,7 +3307,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) } /** - * lpfc_sli_issue_mbox: Issue a mailbox command to firmware. + * lpfc_sli_issue_mbox - Issue a mailbox command to firmware * @phba: Pointer to HBA context object. * @pmbox: Pointer to mailbox object. * @flag: Flag indicating how the mailbox need to be processed. @@ -3365,6 +3377,12 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) goto out_not_finished; } + /* If HBA has a deferred error attention, fail the iocb. */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irqrestore(&phba->hbalock, drvr_flag); + goto out_not_finished; + } + psli = &phba->sli; mb = &pmbox->mb; @@ -3632,7 +3650,7 @@ out_not_finished: } /** - * __lpfc_sli_ringtx_put: Add an iocb to the txq. + * __lpfc_sli_ringtx_put - Add an iocb to the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to address of newly added command iocb. @@ -3651,7 +3669,7 @@ __lpfc_sli_ringtx_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_next_iocb: Get the next iocb in the txq. + * lpfc_sli_next_iocb - Get the next iocb in the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to address of newly added command iocb. @@ -3683,7 +3701,7 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * __lpfc_sli_issue_iocb: Lockless version of lpfc_sli_issue_iocb. + * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to command iocb. @@ -3729,6 +3747,10 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, if (unlikely(pci_channel_offline(phba->pcidev))) return IOCB_ERROR; + /* If HBA has a deferred error attention, fail the iocb. */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) + return IOCB_ERROR; + /* * We should never get an IOCB if we are in a < LINK_DOWN state */ @@ -3813,7 +3835,7 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, /** - * lpfc_sli_issue_iocb: Wrapper function for __lpfc_sli_issue_iocb. + * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to command iocb. @@ -3840,7 +3862,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_extra_ring_setup: Extra ring setup function. + * lpfc_extra_ring_setup - Extra ring setup function * @phba: Pointer to HBA context object. * * This function is called while driver attaches with the @@ -3886,7 +3908,7 @@ lpfc_extra_ring_setup( struct lpfc_hba *phba) } /** - * lpfc_sli_async_event_handler: ASYNC iocb handler function. + * lpfc_sli_async_event_handler - ASYNC iocb handler function * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @iocbq: Pointer to iocb object. @@ -3907,6 +3929,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, uint16_t temp; struct temp_event temp_event_data; struct Scsi_Host *shost; + uint32_t *iocb_w; icmd = &iocbq->iocb; evt_code = icmd->un.asyncstat.evt_code; @@ -3914,13 +3937,23 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, if ((evt_code != ASYNC_TEMP_WARN) && (evt_code != ASYNC_TEMP_SAFE)) { + iocb_w = (uint32_t *) icmd; lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0346 Ring %d handler: unexpected ASYNC_STATUS" - " evt_code 0x%x\n", + " evt_code 0x%x \n" + "W0 0x%08x W1 0x%08x W2 0x%08x W3 0x%08x\n" + "W4 0x%08x W5 0x%08x W6 0x%08x W7 0x%08x\n" + "W8 0x%08x W9 0x%08x W10 0x%08x W11 0x%08x\n" + "W12 0x%08x W13 0x%08x W14 0x%08x W15 0x%08x\n", pring->ringno, - icmd->un.asyncstat.evt_code); + icmd->un.asyncstat.evt_code, + iocb_w[0], iocb_w[1], iocb_w[2], iocb_w[3], + iocb_w[4], iocb_w[5], iocb_w[6], iocb_w[7], + iocb_w[8], iocb_w[9], iocb_w[10], iocb_w[11], + iocb_w[12], iocb_w[13], iocb_w[14], iocb_w[15]); + return; } temp_event_data.data = (uint32_t)temp; @@ -3954,7 +3987,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, /** - * lpfc_sli_setup: SLI ring setup function. + * lpfc_sli_setup - SLI ring setup function * @phba: Pointer to HBA context object. * * lpfc_sli_setup sets up rings of the SLI interface with @@ -4076,7 +4109,7 @@ lpfc_sli_setup(struct lpfc_hba *phba) } /** - * lpfc_sli_queue_setup: Queue initialization function. + * lpfc_sli_queue_setup - Queue initialization function * @phba: Pointer to HBA context object. * * lpfc_sli_queue_setup sets up mailbox queues and iocb queues for each @@ -4115,7 +4148,7 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba) } /** - * lpfc_sli_host_down: Vport cleanup function. + * lpfc_sli_host_down - Vport cleanup function * @vport: Pointer to virtual port object. * * lpfc_sli_host_down is called to clean up the resources @@ -4179,22 +4212,14 @@ lpfc_sli_host_down(struct lpfc_vport *vport) spin_unlock_irqrestore(&phba->hbalock, flags); - while (!list_empty(&completions)) { - list_remove_head(&completions, iocb, struct lpfc_iocbq, list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT; - iocb->iocb.un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); return 1; } /** - * lpfc_sli_hba_down: Resource cleanup function for the HBA. + * lpfc_sli_hba_down - Resource cleanup function for the HBA * @phba: Pointer to HBA context object. * * This function cleans up all iocb, buffers, mailbox commands @@ -4216,8 +4241,6 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) struct lpfc_sli_ring *pring; struct lpfc_dmabuf *buf_ptr; LPFC_MBOXQ_t *pmb; - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; int i; unsigned long flags = 0; @@ -4245,18 +4268,9 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) } spin_unlock_irqrestore(&phba->hbalock, flags); - while (!list_empty(&completions)) { - list_remove_head(&completions, iocb, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); spin_lock_irqsave(&phba->hbalock, flags); list_splice_init(&phba->elsbuf, &completions); @@ -4299,7 +4313,7 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) } /** - * lpfc_sli_pcimem_bcopy: SLI memory copy function. + * lpfc_sli_pcimem_bcopy - SLI memory copy function * @srcp: Source memory pointer. * @destp: Destination memory pointer. * @cnt: Number of words required to be copied. @@ -4329,7 +4343,7 @@ lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt) /** - * lpfc_sli_ringpostbuf_put: Function to add a buffer to postbufq. + * lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mp: Pointer to driver buffer object. @@ -4352,8 +4366,7 @@ lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_get_buffer_tag: Tag allocation function for a buffer posted - * using CMD_QUE_XRI64_CX iocb. + * lpfc_sli_get_buffer_tag - allocates a tag for a CMD_QUE_XRI64_CX buffer * @phba: Pointer to HBA context object. * * When HBQ is enabled, buffers are searched based on tags. This function @@ -4378,8 +4391,7 @@ lpfc_sli_get_buffer_tag(struct lpfc_hba *phba) } /** - * lpfc_sli_ring_taggedbuf_get: Search HBQ buffer associated with - * posted using CMD_QUE_XRI64_CX iocb. + * lpfc_sli_ring_taggedbuf_get - find HBQ buffer associated with given tag * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @tag: Buffer tag. @@ -4422,8 +4434,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_ringpostbuf_get: SLI2 buffer search function for - * unsolicited ct and els events. + * lpfc_sli_ringpostbuf_get - search buffers for unsolicited CT and ELS events * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @phys: DMA address of the buffer. @@ -4466,7 +4477,7 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_abort_els_cmpl: Completion handler for the els abort iocbs. + * lpfc_sli_abort_els_cmpl - Completion handler for the els abort iocbs * @phba: Pointer to HBA context object. * @cmdiocb: Pointer to driver command iocb object. * @rspiocb: Pointer to driver response iocb object. @@ -4542,7 +4553,7 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_ignore_els_cmpl: Completion handler for aborted ELS command. + * lpfc_ignore_els_cmpl - Completion handler for aborted ELS command * @phba: Pointer to HBA context object. * @cmdiocb: Pointer to driver command iocb object. * @rspiocb: Pointer to driver response iocb object. @@ -4572,7 +4583,7 @@ lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_sli_issue_abort_iotag: Abort function for a command iocb. + * lpfc_sli_issue_abort_iotag - Abort function for a command iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @cmdiocb: Pointer to driver command iocb object. @@ -4658,15 +4669,14 @@ abort_iotag_exit: } /** - * lpfc_sli_validate_fcp_iocb: Filtering function, used to find commands - * associated with a vport/SCSI target/lun. + * lpfc_sli_validate_fcp_iocb - find commands associated with a vport or LUN * @iocbq: Pointer to driver iocb object. * @vport: Pointer to driver virtual port object. * @tgt_id: SCSI ID of the target. * @lun_id: LUN ID of the scsi device. * @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST * - * This function acts as iocb filter for functions which abort or count + * This function acts as an iocb filter for functions which abort or count * all FCP iocbs pending on a lun/SCSI target/SCSI host. It will return * 0 if the filtering criteria is met for the given iocb and will return * 1 if the filtering criteria is not met. @@ -4724,7 +4734,7 @@ lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport, } /** - * lpfc_sli_sum_iocb: Function to count the number of FCP iocbs pending. + * lpfc_sli_sum_iocb - Function to count the number of FCP iocbs pending * @vport: Pointer to virtual port. * @tgt_id: SCSI ID of the target. * @lun_id: LUN ID of the scsi device. @@ -4762,8 +4772,7 @@ lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id, } /** - * lpfc_sli_abort_fcp_cmpl: Completion handler function for an aborted - * FCP iocb. + * lpfc_sli_abort_fcp_cmpl - Completion handler function for aborted FCP IOCBs * @phba: Pointer to HBA context object * @cmdiocb: Pointer to command iocb object. * @rspiocb: Pointer to response iocb object. @@ -4781,8 +4790,7 @@ lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_sli_abort_iocb: This function issue abort for all SCSI commands - * pending on a SCSI host(vport)/target/lun. + * lpfc_sli_abort_iocb - issue abort for all commands on a host/target/LUN * @vport: Pointer to virtual port. * @pring: Pointer to driver SLI ring object. * @tgt_id: SCSI ID of the target. @@ -4854,8 +4862,7 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_wake_iocb_wait: iocb completion handler for iocb issued using - * lpfc_sli_issue_iocb_wait. + * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler * @phba: Pointer to HBA context object. * @cmdiocbq: Pointer to command iocb. * @rspiocbq: Pointer to response iocb. @@ -4893,7 +4900,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba, } /** - * lpfc_sli_issue_iocb_wait: Synchronous function to issue iocb commands. + * lpfc_sli_issue_iocb_wait - Synchronous function to issue iocb commands * @phba: Pointer to HBA context object.. * @pring: Pointer to sli ring. * @piocb: Pointer to command iocb. @@ -5000,7 +5007,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba, } /** - * lpfc_sli_issue_mbox_wait: Synchronous function to issue mailbox. + * lpfc_sli_issue_mbox_wait - Synchronous function to issue mailbox * @phba: Pointer to HBA context object. * @pmboxq: Pointer to driver mailbox object. * @timeout: Timeout in number of seconds. @@ -5070,7 +5077,7 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq, } /** - * lpfc_sli_flush_mbox_queue: mailbox queue cleanup function. + * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function * @phba: Pointer to HBA context. * * This function is called to cleanup any pending mailbox @@ -5113,7 +5120,7 @@ lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba) } /** - * lpfc_sli_check_eratt: check error attention events + * lpfc_sli_check_eratt - check error attention events * @phba: Pointer to HBA context. * * This function is called form timer soft interrupt context to check HBA's @@ -5145,11 +5152,31 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba) return 0; } + /* + * If there is deferred error attention, do not check for error + * attention + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return 0; + } + /* Read chip Host Attention (HA) register */ ha_copy = readl(phba->HAregaddr); if (ha_copy & HA_ERATT) { /* Read host status register to retrieve error event */ lpfc_sli_read_hs(phba); + + /* Check if there is a deferred error condition is active */ + if ((HS_FFER1 & phba->work_hs) && + ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | + HS_FFER6 | HS_FFER7) & phba->work_hs)) { + phba->hba_flag |= DEFER_ERATT; + /* Clear all interrupt enable conditions */ + writel(0, phba->HCregaddr); + readl(phba->HCregaddr); + } + /* Set the driver HA work bitmap */ phba->work_ha |= HA_ERATT; /* Indicate polling handles this ERATT */ @@ -5162,7 +5189,7 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba) } /** - * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver. + * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * @@ -5238,6 +5265,16 @@ lpfc_sp_intr_handler(int irq, void *dev_id) /* Indicate interrupt handler handles ERATT */ phba->hba_flag |= HBA_ERATT_HANDLED; } + + /* + * If there is deferred error attention, do not check for any + * interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } + /* Clear up only attention source related to slow-path */ writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)), phba->HAregaddr); @@ -5309,8 +5346,22 @@ lpfc_sp_intr_handler(int irq, void *dev_id) } } spin_lock_irqsave(&phba->hbalock, iflag); - if (work_ha_copy & HA_ERATT) + if (work_ha_copy & HA_ERATT) { lpfc_sli_read_hs(phba); + /* + * Check if there is a deferred error condition + * is active + */ + if ((HS_FFER1 & phba->work_hs) && + ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | + HS_FFER6 | HS_FFER7) & phba->work_hs)) { + phba->hba_flag |= DEFER_ERATT; + /* Clear all interrupt enable conditions */ + writel(0, phba->HCregaddr); + readl(phba->HCregaddr); + } + } + if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) { pmb = phba->sli.mbox_active; pmbox = &pmb->mb; @@ -5423,7 +5474,7 @@ send_current_mbox: } /* lpfc_sp_intr_handler */ /** - * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver. + * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * @@ -5474,6 +5525,14 @@ lpfc_fp_intr_handler(int irq, void *dev_id) ha_copy = readl(phba->HAregaddr); /* Clear up only attention source related to fast-path */ spin_lock_irqsave(&phba->hbalock, iflag); + /* + * If there is deferred error attention, do not check for + * any interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)), phba->HAregaddr); readl(phba->HAregaddr); /* flush */ @@ -5510,7 +5569,7 @@ lpfc_fp_intr_handler(int irq, void *dev_id) } /* lpfc_fp_intr_handler */ /** - * lpfc_intr_handler: The device-level interrupt handler of lpfc driver. + * lpfc_intr_handler - The device-level interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * @@ -5566,6 +5625,14 @@ lpfc_intr_handler(int irq, void *dev_id) phba->hba_flag |= HBA_ERATT_HANDLED; } + /* + * If there is deferred error attention, do not check for any interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } + /* Clear attention sources except link and error attentions */ writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr); readl(phba->HAregaddr); /* flush */ diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 7e32e95..e599519 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2008 Emulex. All rights reserved. * + * Copyright (C) 2004-2009 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.0" +#define LPFC_DRIVER_VERSION "8.3.1" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" @@ -26,4 +26,4 @@ #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \ LPFC_DRIVER_VERSION -#define LPFC_COPYRIGHT "Copyright(c) 2004-2008 Emulex. All rights reserved." +#define LPFC_COPYRIGHT "Copyright(c) 2004-2009 Emulex. All rights reserved." diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 63b54c6..917ad56 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -206,7 +206,7 @@ lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport) } /** - * lpfc_discovery_wait: Wait for driver discovery to quiesce. + * lpfc_discovery_wait - Wait for driver discovery to quiesce * @vport: The virtual port for which this call is being executed. * * This driver calls this routine specifically from lpfc_vport_delete @@ -741,7 +741,7 @@ lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports) /** - * lpfc_vport_reset_stat_data: Reset the statistical data for the vport. + * lpfc_vport_reset_stat_data - Reset the statistical data for the vport * @vport: Pointer to vport object. * * This function resets the statistical data for the vport. This function @@ -763,8 +763,7 @@ lpfc_vport_reset_stat_data(struct lpfc_vport *vport) /** - * lpfc_alloc_bucket: Allocate data buffer required for collecting - * statistical data. + * lpfc_alloc_bucket - Allocate data buffer required for statistical data * @vport: Pointer to vport object. * * This function allocates data buffer required for all the FC @@ -797,8 +796,7 @@ lpfc_alloc_bucket(struct lpfc_vport *vport) } /** - * lpfc_free_bucket: Free data buffer required for collecting - * statistical data. + * lpfc_free_bucket - Free data buffer required for statistical data * @vport: Pointer to vport object. * * Th function frees statistical data buffer of all the FC diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index a91f514..f3da592 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -636,6 +636,14 @@ _base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc) static irqreturn_t _base_interrupt(int irq, void *bus_id) { + union reply_descriptor { + u64 word; + struct { + u32 low; + u32 high; + } u; + }; + union reply_descriptor rd; u32 post_index, post_index_next, completed_cmds; u8 request_desript_type; u16 smid; @@ -656,7 +664,8 @@ _base_interrupt(int irq, void *bus_id) completed_cmds = 0; do { - if (ioc->reply_post_free[post_index].Words == ~0ULL) + rd.word = ioc->reply_post_free[post_index].Words; + if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX) goto out; reply = 0; cb_idx = 0xFF; @@ -721,7 +730,7 @@ _base_interrupt(int irq, void *bus_id) for (i = 0 ; i < completed_cmds; i++) { post_index = post_index_next; /* poison the reply post descriptor */ - ioc->reply_post_free[post_index_next].Words = ~0ULL; + ioc->reply_post_free[post_index_next].Words = ULLONG_MAX; post_index_next = (post_index == (ioc->reply_post_queue_depth - 1)) ? 0 : post_index + 1; @@ -1387,6 +1396,64 @@ mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid, } /** + * _base_display_dell_branding - Disply branding string + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc) +{ + char dell_branding[MPT2SAS_DELL_BRANDING_SIZE]; + + if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL) + return; + + memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE); + switch (ioc->pdev->subsystem_device) { + case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_6GBPS_SAS_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + default: + sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device); + break; + } + + printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X)," + " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding, + ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor, + ioc->pdev->subsystem_device); +} + +/** * _base_display_ioc_capabilities - Disply IOC's capabilities. * @ioc: per adapter object * @@ -1427,6 +1494,8 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) i++; } + _base_display_dell_branding(ioc); + i = 0; printk("), "); printk("Capabilities=("); @@ -3068,7 +3137,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, /* initialize Reply Post Free Queue */ for (i = 0; i < ioc->reply_post_queue_depth; i++) - ioc->reply_post_free[i].Words = ~0ULL; + ioc->reply_post_free[i].Words = ULLONG_MAX; r = _base_send_ioc_init(ioc, VF_ID, sleep_flag); if (r) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 6945ff4..babd4cc 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -68,11 +68,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>" #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "00.100.11.16" +#define MPT2SAS_DRIVER_VERSION "01.100.02.00" #define MPT2SAS_MAJOR_VERSION 00 #define MPT2SAS_MINOR_VERSION 100 -#define MPT2SAS_BUILD_VERSION 11 -#define MPT2SAS_RELEASE_VERSION 16 +#define MPT2SAS_BUILD_VERSION 02 +#define MPT2SAS_RELEASE_VERSION 00 /* * Set MPT2SAS_SG_DEPTH value based on user input. @@ -130,6 +130,30 @@ #define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT /* + * Dell HBA branding + */ +#define MPT2SAS_DELL_BRANDING_SIZE 32 + +#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA" +#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter" +#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated" +#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular" +#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded" +#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200" +#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS" + +/* + * Dell HBA SSDIDs + */ +#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C +#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D +#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E +#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F +#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20 +#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21 +#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22 + +/* * per target private data */ #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 2d4f85c..ba6ab17 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -64,6 +64,9 @@ static struct fasync_struct *async_queue; static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait); +static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, + u8 *issue_reset); + /** * enum block_state - blocking state * @NON_BLOCKING: non blocking @@ -378,10 +381,22 @@ _ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp) void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) { + int i; + u8 issue_reset; + switch (reset_phase) { case MPT2_IOC_PRE_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!(ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_REGISTERED)) + continue; + if ((ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_RELEASED)) + continue; + _ctl_send_release(ioc, i, &issue_reset); + } break; case MPT2_IOC_AFTER_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " @@ -395,6 +410,17 @@ mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) case MPT2_IOC_DONE_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!(ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_REGISTERED)) + continue; + if ((ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_RELEASED)) + continue; + ioc->diag_buffer_status[i] |= + MPT2_DIAG_BUFFER_IS_DIAG_RESET; + } break; } } @@ -714,8 +740,10 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) { - if (_ctl_do_task_abort(ioc, &karg, tm_request)) + if (_ctl_do_task_abort(ioc, &karg, tm_request)) { + mpt2sas_base_free_smid(ioc, smid); goto out; + } } mutex_lock(&ioc->tm_cmds.mutex); @@ -915,9 +943,9 @@ _ctl_getiocinfo(void __user *arg) karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn); karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus); karg.firmware_version = ioc->facts.FWVersion.Word; - strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION, - MPT2_IOCTL_VERSION_LENGTH); - karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0'; + strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME); + strcat(karg.driver_version, "-"); + strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION); karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); if (copy_to_user(arg, &karg, sizeof(karg))) { @@ -1551,81 +1579,38 @@ _ctl_diag_query(void __user *arg) } /** - * _ctl_diag_release - request to send Diag Release Message to firmware - * @arg - user space buffer containing ioctl content - * @state - NON_BLOCKING or BLOCKING + * _ctl_send_release - Diag Release Message + * @ioc: per adapter object + * @buffer_type - specifies either TRACE or SNAPSHOT + * @issue_reset - specifies whether host reset is required. * - * This allows ownership of the specified buffer to returned to the driver, - * allowing an application to read the buffer without fear that firmware is - * overwritting information in the buffer. */ -static long -_ctl_diag_release(void __user *arg, enum block_state state) +static int +_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset) { - struct mpt2_diag_release karg; - struct MPT2SAS_ADAPTER *ioc; - void *request_data; - int rc; Mpi2DiagReleaseRequest_t *mpi_request; Mpi2DiagReleaseReply_t *mpi_reply; - u8 buffer_type; - unsigned long timeleft; u16 smid; u16 ioc_status; - u8 issue_reset = 0; - - if (copy_from_user(&karg, arg, sizeof(karg))) { - printk(KERN_ERR "failure at %s:%d/%s()!\n", - __FILE__, __LINE__, __func__); - return -EFAULT; - } - if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) - return -ENODEV; + u32 ioc_state; + int rc; + unsigned long timeleft; dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, __func__)); - buffer_type = karg.unique_id & 0x000000ff; - if (!_ctl_diag_capability(ioc, buffer_type)) { - printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " - "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); - return -EPERM; - } - - if ((ioc->diag_buffer_status[buffer_type] & - MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { - printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " - "registered\n", ioc->name, __func__, buffer_type); - return -EINVAL; - } - - if (karg.unique_id != ioc->unique_id[buffer_type]) { - printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " - "registered\n", ioc->name, __func__, karg.unique_id); - return -EINVAL; - } - - if (ioc->diag_buffer_status[buffer_type] & - MPT2_DIAG_BUFFER_IS_RELEASED) { - printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " - "is already released\n", ioc->name, __func__, - buffer_type); - return 0; - } - - request_data = ioc->diag_buffer[buffer_type]; + rc = 0; + *issue_reset = 0; - if (!request_data) { - printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " - "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); - return -ENOMEM; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "skipping due to FAULT state\n", ioc->name, + __func__)); + rc = -EAGAIN; + goto out; } - if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) - return -EAGAIN; - else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) - return -ERESTARTSYS; - if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", ioc->name, __func__); @@ -1641,7 +1626,6 @@ _ctl_diag_release(void __user *arg, enum block_state state) goto out; } - rc = 0; ioc->ctl_cmds.status = MPT2_CMD_PENDING; memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); @@ -1660,8 +1644,9 @@ _ctl_diag_release(void __user *arg, enum block_state state) _debug_dump_mf(mpi_request, sizeof(Mpi2DiagReleaseRequest_t)/4); if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) - issue_reset = 1; - goto issue_host_reset; + *issue_reset = 1; + rc = -EFAULT; + goto out; } /* process the completed Reply Message Frame */ @@ -1687,14 +1672,101 @@ _ctl_diag_release(void __user *arg, enum block_state state) rc = -EFAULT; } - issue_host_reset: + out: + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + return rc; +} + +/** + * _ctl_diag_release - request to send Diag Release Message to firmware + * @arg - user space buffer containing ioctl content + * @state - NON_BLOCKING or BLOCKING + * + * This allows ownership of the specified buffer to returned to the driver, + * allowing an application to read the buffer without fear that firmware is + * overwritting information in the buffer. + */ +static long +_ctl_diag_release(void __user *arg, enum block_state state) +{ + struct mpt2_diag_release karg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data; + int rc; + u8 buffer_type; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " + "registered\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + if (ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_RELEASED) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " + "is already released\n", ioc->name, __func__, + buffer_type); + return 0; + } + + request_data = ioc->diag_buffer[buffer_type]; + + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + /* buffers were released by due to host reset */ + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_DIAG_RESET)) { + ioc->diag_buffer_status[buffer_type] |= + MPT2_DIAG_BUFFER_IS_RELEASED; + ioc->diag_buffer_status[buffer_type] &= + ~MPT2_DIAG_BUFFER_IS_DIAG_RESET; + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " + "was released due to host reset\n", ioc->name, __func__, + buffer_type); + return 0; + } + + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + rc = _ctl_send_release(ioc, buffer_type, &issue_reset); + if (issue_reset) mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); - out: - - ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; mutex_unlock(&ioc->ctl_cmds.mutex); return rc; } diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h index dbb6c0c..4da1143 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h @@ -50,7 +50,7 @@ #endif #define MPT2SAS_DEV_NAME "mpt2ctl" -#define MPT2_MAGIC_NUMBER 'm' +#define MPT2_MAGIC_NUMBER 'L' #define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */ /** @@ -295,8 +295,9 @@ struct mpt2_ioctl_btdh_mapping { /* status bits for ioc->diag_buffer_status */ -#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01) -#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02) +#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01) +#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02) +#define MPT2_DIAG_BUFFER_IS_DIAG_RESET (0x04) /* application flags for mpt2_diag_register, mpt2_diag_query */ #define MPT2_APP_FLAGS_APP_OWNED (0x0001) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 0c463c4..e3a7967 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -119,7 +119,7 @@ struct sense_info { */ struct fw_event_work { struct list_head list; - struct delayed_work work; + struct work_struct work; struct MPT2SAS_ADAPTER *ioc; u8 VF_ID; u8 host_reset_handling; @@ -516,12 +516,8 @@ _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc, handle = sas_device->handle; parent_handle = sas_device->parent_handle; sas_address = sas_device->sas_address; - if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) { + if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) _scsih_sas_device_remove(ioc, sas_device); - } else if (!sas_device->starget) { - mpt2sas_transport_port_remove(ioc, sas_address, parent_handle); - _scsih_sas_device_remove(ioc, sas_device); - } } /** @@ -1203,7 +1199,9 @@ scsih_target_destroy(struct scsi_target *starget) rphy = dev_to_rphy(starget->dev.parent); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, rphy->identify.sas_address); - if (sas_device) + if (sas_device && (sas_device->starget == starget) && + (sas_device->id == starget->id) && + (sas_device->channel == starget->channel)) sas_device->starget = NULL; spin_unlock_irqrestore(&ioc->sas_device_lock, flags); @@ -2009,8 +2007,8 @@ _scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) spin_lock_irqsave(&ioc->fw_event_lock, flags); list_add_tail(&fw_event->list, &ioc->fw_event_list); - INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work); - queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1); + INIT_WORK(&fw_event->work, _firmware_event_work); + queue_work(ioc->firmware_event_thread, &fw_event->work); spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } @@ -2054,7 +2052,7 @@ _scsih_fw_event_requeue(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work return; spin_lock_irqsave(&ioc->fw_event_lock, flags); - queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay); + queue_work(ioc->firmware_event_thread, &fw_event->work); spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } @@ -2863,8 +2861,9 @@ scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) struct sense_info data; const void *sense_data = mpt2sas_base_get_sense_buffer(ioc, smid); - memcpy(scmd->sense_buffer, sense_data, + u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, le32_to_cpu(mpi_reply->SenseCount)); + memcpy(scmd->sense_buffer, sense_data, sz); _scsih_normalize_sense(scmd->sense_buffer, &data); /* failure prediction threshold exceeded */ if (data.asc == 0x5D) @@ -3923,7 +3922,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, mpt2sas_scsih_issue_tm(ioc, handle, lun, MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30); - termination_count += le32_to_cpu(mpi_reply->TerminationCount); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) && (mpi_reply->ResponseCode == @@ -3933,10 +3932,10 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, continue; mpt2sas_scsih_issue_tm(ioc, handle, lun, - MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30); + MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; termination_count += le32_to_cpu(mpi_reply->TerminationCount); } - ioc->tm_cmds.status = MPT2_CMD_NOT_USED; ioc->broadcast_aen_busy = 0; mutex_unlock(&ioc->tm_cmds.mutex); @@ -4962,7 +4961,7 @@ static void _firmware_event_work(struct work_struct *work) { struct fw_event_work *fw_event = container_of(work, - struct fw_event_work, work.work); + struct fw_event_work, work); unsigned long flags; struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 2a5f077..1ce6b24 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -205,6 +205,74 @@ static unsigned _osd_req_alist_elem_size(struct osd_request *or, unsigned len) osdv2_attr_list_elem_size(len); } +static void _osd_req_alist_elem_encode(struct osd_request *or, + void *attr_last, const struct osd_attr *oa) +{ + if (osd_req_is_ver1(or)) { + struct osdv1_attributes_list_element *attr = attr_last; + + attr->attr_page = cpu_to_be32(oa->attr_page); + attr->attr_id = cpu_to_be32(oa->attr_id); + attr->attr_bytes = cpu_to_be16(oa->len); + memcpy(attr->attr_val, oa->val_ptr, oa->len); + } else { + struct osdv2_attributes_list_element *attr = attr_last; + + attr->attr_page = cpu_to_be32(oa->attr_page); + attr->attr_id = cpu_to_be32(oa->attr_id); + attr->attr_bytes = cpu_to_be16(oa->len); + memcpy(attr->attr_val, oa->val_ptr, oa->len); + } +} + +static int _osd_req_alist_elem_decode(struct osd_request *or, + void *cur_p, struct osd_attr *oa, unsigned max_bytes) +{ + unsigned inc; + if (osd_req_is_ver1(or)) { + struct osdv1_attributes_list_element *attr = cur_p; + + if (max_bytes < sizeof(*attr)) + return -1; + + oa->len = be16_to_cpu(attr->attr_bytes); + inc = _osd_req_alist_elem_size(or, oa->len); + if (inc > max_bytes) + return -1; + + oa->attr_page = be32_to_cpu(attr->attr_page); + oa->attr_id = be32_to_cpu(attr->attr_id); + + /* OSD1: On empty attributes we return a pointer to 2 bytes + * of zeros. This keeps similar behaviour with OSD2. + * (See below) + */ + oa->val_ptr = likely(oa->len) ? attr->attr_val : + (u8 *)&attr->attr_bytes; + } else { + struct osdv2_attributes_list_element *attr = cur_p; + + if (max_bytes < sizeof(*attr)) + return -1; + + oa->len = be16_to_cpu(attr->attr_bytes); + inc = _osd_req_alist_elem_size(or, oa->len); + if (inc > max_bytes) + return -1; + + oa->attr_page = be32_to_cpu(attr->attr_page); + oa->attr_id = be32_to_cpu(attr->attr_id); + + /* OSD2: For convenience, on empty attributes, we return 8 bytes + * of zeros here. This keeps the same behaviour with OSD2r04, + * and is nice with null terminating ASCII fields. + * oa->val_ptr == NULL marks the end-of-list, or error. + */ + oa->val_ptr = likely(oa->len) ? attr->attr_val : attr->reserved; + } + return inc; +} + static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head) { return osd_req_is_ver1(or) ? @@ -282,9 +350,9 @@ _osd_req_sec_params(struct osd_request *or) struct osd_cdb *ocdb = &or->cdb; if (osd_req_is_ver1(or)) - return &ocdb->v1.sec_params; + return (struct osd_security_parameters *)&ocdb->v1.sec_params; else - return &ocdb->v2.sec_params; + return (struct osd_security_parameters *)&ocdb->v2.sec_params; } void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device) @@ -612,9 +680,9 @@ static int _osd_req_list_objects(struct osd_request *or, WARN_ON(or->in.bio); bio = bio_map_kern(q, list, len, or->alloc_flags); - if (!bio) { + if (IS_ERR(bio)) { OSD_ERR("!!! Failed to allocate list_objects BIO\n"); - return -ENOMEM; + return PTR_ERR(bio); } bio->bi_rw &= ~(1 << BIO_RW); @@ -798,7 +866,6 @@ int osd_req_add_set_attr_list(struct osd_request *or, attr_last = or->set_attr.buff + total_bytes; for (; nelem; --nelem) { - struct osd_attributes_list_element *attr; unsigned elem_size = _osd_req_alist_elem_size(or, oa->len); total_bytes += elem_size; @@ -811,11 +878,7 @@ int osd_req_add_set_attr_list(struct osd_request *or, or->set_attr.buff + or->set_attr.total_bytes; } - attr = attr_last; - attr->attr_page = cpu_to_be32(oa->attr_page); - attr->attr_id = cpu_to_be32(oa->attr_id); - attr->attr_bytes = cpu_to_be16(oa->len); - memcpy(attr->attr_val, oa->val_ptr, oa->len); + _osd_req_alist_elem_encode(or, attr_last, oa); attr_last += elem_size; ++oa; @@ -1070,15 +1133,10 @@ int osd_req_decode_get_attr_list(struct osd_request *or, } for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) { - struct osd_attributes_list_element *attr = cur_p; - unsigned inc; + int inc = _osd_req_alist_elem_decode(or, cur_p, oa, + returned_bytes - cur_bytes); - oa->len = be16_to_cpu(attr->attr_bytes); - inc = _osd_req_alist_elem_size(or, oa->len); - OSD_DEBUG("oa->len=%d inc=%d cur_bytes=%d\n", - oa->len, inc, cur_bytes); - cur_bytes += inc; - if (cur_bytes > returned_bytes) { + if (inc < 0) { OSD_ERR("BAD FOOD from target. list not valid!" "c=%d r=%d n=%d\n", cur_bytes, returned_bytes, n); @@ -1086,10 +1144,7 @@ int osd_req_decode_get_attr_list(struct osd_request *or, break; } - oa->attr_page = be32_to_cpu(attr->attr_page); - oa->attr_id = be32_to_cpu(attr->attr_id); - oa->val_ptr = attr->attr_val; - + cur_bytes += inc; cur_p += inc; ++oa; } @@ -1159,6 +1214,24 @@ static int _osd_req_finalize_attr_page(struct osd_request *or) return ret; } +static inline void osd_sec_parms_set_out_offset(bool is_v1, + struct osd_security_parameters *sec_parms, osd_cdb_offset offset) +{ + if (is_v1) + sec_parms->v1.data_out_integrity_check_offset = offset; + else + sec_parms->v2.data_out_integrity_check_offset = offset; +} + +static inline void osd_sec_parms_set_in_offset(bool is_v1, + struct osd_security_parameters *sec_parms, osd_cdb_offset offset) +{ + if (is_v1) + sec_parms->v1.data_in_integrity_check_offset = offset; + else + sec_parms->v2.data_in_integrity_check_offset = offset; +} + static int _osd_req_finalize_data_integrity(struct osd_request *or, bool has_in, bool has_out, const u8 *cap_key) { @@ -1182,8 +1255,8 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or, or->out_data_integ.get_attributes_bytes = cpu_to_be64( or->enc_get_attr.total_bytes); - sec_parms->data_out_integrity_check_offset = - osd_req_encode_offset(or, or->out.total_bytes, &pad); + osd_sec_parms_set_out_offset(osd_req_is_ver1(or), sec_parms, + osd_req_encode_offset(or, or->out.total_bytes, &pad)); ret = _req_append_segment(or, pad, &seg, or->out.last_seg, &or->out); @@ -1203,8 +1276,8 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or, }; unsigned pad; - sec_parms->data_in_integrity_check_offset = - osd_req_encode_offset(or, or->in.total_bytes, &pad); + osd_sec_parms_set_in_offset(osd_req_is_ver1(or), sec_parms, + osd_req_encode_offset(or, or->in.total_bytes, &pad)); ret = _req_append_segment(or, pad, &seg, or->in.last_seg, &or->in); diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c index f644c95..22b59e1 100644 --- a/drivers/scsi/osd/osd_uld.c +++ b/drivers/scsi/osd/osd_uld.c @@ -173,26 +173,26 @@ static const struct file_operations osd_fops = { .unlocked_ioctl = osd_uld_ioctl, }; -struct osd_dev *osduld_path_lookup(const char *path) +struct osd_dev *osduld_path_lookup(const char *name) { - struct nameidata nd; + struct path path; struct inode *inode; struct cdev *cdev; struct osd_uld_device *uninitialized_var(oud); int error; - if (!path || !*path) { + if (!name || !*name) { OSD_ERR("Mount with !path || !*path\n"); return ERR_PTR(-EINVAL); } - error = path_lookup(path, LOOKUP_FOLLOW, &nd); + error = kern_path(name, LOOKUP_FOLLOW, &path); if (error) { - OSD_ERR("path_lookup of %s faild=>%d\n", path, error); + OSD_ERR("path_lookup of %s failed=>%d\n", name, error); return ERR_PTR(error); } - inode = nd.path.dentry->d_inode; + inode = path.dentry->d_inode; error = -EINVAL; /* Not the right device e.g osd_uld_device */ if (!S_ISCHR(inode->i_mode)) { OSD_DEBUG("!S_ISCHR()\n"); @@ -202,15 +202,15 @@ struct osd_dev *osduld_path_lookup(const char *path) cdev = inode->i_cdev; if (!cdev) { OSD_ERR("Before mounting an OSD Based filesystem\n"); - OSD_ERR(" user-mode must open+close the %s device\n", path); - OSD_ERR(" Example: bash: echo < %s\n", path); + OSD_ERR(" user-mode must open+close the %s device\n", name); + OSD_ERR(" Example: bash: echo < %s\n", name); goto out; } /* The Magic wand. Is it our char-dev */ /* TODO: Support sg devices */ if (cdev->owner != THIS_MODULE) { - OSD_ERR("Error mounting %s - is not an OSD device\n", path); + OSD_ERR("Error mounting %s - is not an OSD device\n", name); goto out; } @@ -220,7 +220,7 @@ struct osd_dev *osduld_path_lookup(const char *path) error = 0; out: - path_put(&nd.path); + path_put(&path); return error ? ERR_PTR(error) : &oud->od; } EXPORT_SYMBOL(osduld_path_lookup); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index d1cb64a..bb218c8 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1291,10 +1291,8 @@ static inline int scsi_target_queue_ready(struct Scsi_Host *shost, if (--starget->target_blocked == 0) { SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget, "unblocking target at zero depth\n")); - } else { - blk_plug_device(sdev->request_queue); + } else return 0; - } } if (scsi_target_is_busy(starget)) { diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 3fcb64b..8404423 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -50,6 +50,7 @@ #include <linux/string_helpers.h> #include <linux/async.h> #include <asm/uaccess.h> +#include <asm/unaligned.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -1344,12 +1345,8 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, return -EINVAL; } - sector_size = (buffer[8] << 24) | (buffer[9] << 16) | - (buffer[10] << 8) | buffer[11]; - lba = (((u64)buffer[0] << 56) | ((u64)buffer[1] << 48) | - ((u64)buffer[2] << 40) | ((u64)buffer[3] << 32) | - ((u64)buffer[4] << 24) | ((u64)buffer[5] << 16) | - ((u64)buffer[6] << 8) | (u64)buffer[7]); + sector_size = get_unaligned_be32(&buffer[8]); + lba = get_unaligned_be64(&buffer[0]); sd_read_protection_type(sdkp, buffer); @@ -1400,10 +1397,8 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, return -EINVAL; } - sector_size = (buffer[4] << 24) | (buffer[5] << 16) | - (buffer[6] << 8) | buffer[7]; - lba = (buffer[0] << 24) | (buffer[1] << 16) | - (buffer[2] << 8) | buffer[3]; + sector_size = get_unaligned_be32(&buffer[4]); + lba = get_unaligned_be32(&buffer[0]); if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) { sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 82312df..e1716f1 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -179,7 +179,7 @@ typedef struct sg_device { /* holds the state of each scsi generic device */ /* tasklet or soft irq callback */ static void sg_rq_end_io(struct request *rq, int uptodate); static int sg_start_req(Sg_request *srp, unsigned char *cmd); -static void sg_finish_rem_req(Sg_request * srp); +static int sg_finish_rem_req(Sg_request * srp); static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size); static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp); @@ -518,7 +518,7 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp) goto err_out; } err_out: - sg_finish_rem_req(srp); + err = sg_finish_rem_req(srp); return (0 == err) ? count : err; } @@ -1696,9 +1696,10 @@ static int sg_start_req(Sg_request *srp, unsigned char *cmd) return res; } -static void -sg_finish_rem_req(Sg_request * srp) +static int sg_finish_rem_req(Sg_request * srp) { + int ret = 0; + Sg_fd *sfp = srp->parentfp; Sg_scatter_hold *req_schp = &srp->data; @@ -1710,12 +1711,14 @@ sg_finish_rem_req(Sg_request * srp) if (srp->rq) { if (srp->bio) - blk_rq_unmap_user(srp->bio); + ret = blk_rq_unmap_user(srp->bio); blk_put_request(srp->rq); } sg_remove_request(sfp, srp); + + return ret; } static int diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index d92ff51..291236e 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -309,6 +309,11 @@ int sr_drive_status(struct cdrom_device_info *cdi, int slot) if (0 == sr_test_unit_ready(cd->device, &sshdr)) return CDS_DISC_OK; + /* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */ + if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY + && sshdr.asc == 0x04 && sshdr.ascq == 0x01) + return CDS_DRIVE_NOT_READY; + if (!cdrom_get_media_event(cdi, &med)) { if (med.media_present) return CDS_DISC_OK; diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 7ba7d70..7be52fe 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -23,16 +23,18 @@ static char *serial_version = "$Revision: 1.25 $"; #include <linux/mm.h> #include <linux/slab.h> #include <linux/init.h> -#include <asm/uaccess.h> #include <linux/kernel.h> #include <linux/mutex.h> #include <linux/bitops.h> +#include <linux/seq_file.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/uaccess.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/irq.h> #include <asm/dma.h> #include <asm/system.h> -#include <linux/delay.h> #include <arch/svinto.h> @@ -456,7 +458,6 @@ static struct e100_serial rs_table[] = { #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) -static struct ktermios *serial_termios[NR_PORTS]; #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER static struct fast_timer fast_timers[NR_PORTS]; #endif @@ -4257,151 +4258,132 @@ rs_open(struct tty_struct *tty, struct file * filp) return 0; } +#ifdef CONFIG_PROC_FS /* * /proc fs routines.... */ -static int line_info(char *buf, struct e100_serial *info) +static void seq_line_info(struct seq_file *m, struct e100_serial *info) { - char stat_buf[30]; - int ret; unsigned long tmp; - ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d", - info->line, (unsigned long)info->ioport, info->irq); + seq_printf(m, "%d: uart:E100 port:%lX irq:%d", + info->line, (unsigned long)info->ioport, info->irq); if (!info->ioport || (info->type == PORT_UNKNOWN)) { - ret += sprintf(buf+ret, "\n"); - return ret; + seq_printf(m, "\n"); + return; } - stat_buf[0] = 0; - stat_buf[1] = 0; - if (!E100_RTS_GET(info)) - strcat(stat_buf, "|RTS"); - if (!E100_CTS_GET(info)) - strcat(stat_buf, "|CTS"); - if (!E100_DTR_GET(info)) - strcat(stat_buf, "|DTR"); - if (!E100_DSR_GET(info)) - strcat(stat_buf, "|DSR"); - if (!E100_CD_GET(info)) - strcat(stat_buf, "|CD"); - if (!E100_RI_GET(info)) - strcat(stat_buf, "|RI"); - - ret += sprintf(buf+ret, " baud:%d", info->baud); - - ret += sprintf(buf+ret, " tx:%lu rx:%lu", + seq_printf(m, " baud:%d", info->baud); + seq_printf(m, " tx:%lu rx:%lu", (unsigned long)info->icount.tx, (unsigned long)info->icount.rx); tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - if (tmp) { - ret += sprintf(buf+ret, " tx_pend:%lu/%lu", - (unsigned long)tmp, - (unsigned long)SERIAL_XMIT_SIZE); - } + if (tmp) + seq_printf(m, " tx_pend:%lu/%lu", + (unsigned long)tmp, + (unsigned long)SERIAL_XMIT_SIZE); - ret += sprintf(buf+ret, " rx_pend:%lu/%lu", - (unsigned long)info->recv_cnt, - (unsigned long)info->max_recv_cnt); + seq_printf(m, " rx_pend:%lu/%lu", + (unsigned long)info->recv_cnt, + (unsigned long)info->max_recv_cnt); #if 1 if (info->port.tty) { - if (info->port.tty->stopped) - ret += sprintf(buf+ret, " stopped:%i", - (int)info->port.tty->stopped); + seq_printf(m, " stopped:%i", + (int)info->port.tty->stopped); if (info->port.tty->hw_stopped) - ret += sprintf(buf+ret, " hw_stopped:%i", - (int)info->port.tty->hw_stopped); + seq_printf(m, " hw_stopped:%i", + (int)info->port.tty->hw_stopped); } { unsigned char rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) - ret += sprintf(buf+ret, " xoff_detect:1"); + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) + seq_printf(m, " xoff_detect:1"); } #endif - - - if (info->icount.frame) - ret += sprintf(buf+ret, " fe:%lu", - (unsigned long)info->icount.frame); + seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); if (info->icount.parity) - ret += sprintf(buf+ret, " pe:%lu", - (unsigned long)info->icount.parity); + seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); if (info->icount.brk) - ret += sprintf(buf+ret, " brk:%lu", - (unsigned long)info->icount.brk); + seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); if (info->icount.overrun) - ret += sprintf(buf+ret, " oe:%lu", - (unsigned long)info->icount.overrun); + seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); /* * Last thing is the RS-232 status lines */ - ret += sprintf(buf+ret, " %s\n", stat_buf+1); - return ret; + if (!E100_RTS_GET(info)) + seq_puts(m, "|RTS"); + if (!E100_CTS_GET(info)) + seq_puts(m, "|CTS"); + if (!E100_DTR_GET(info)) + seq_puts(m, "|DTR"); + if (!E100_DSR_GET(info)) + seq_puts(m, "|DSR"); + if (!E100_CD_GET(info)) + seq_puts(m, "|CD"); + if (!E100_RI_GET(info)) + seq_puts(m, "|RI"); + seq_puts(m, "\n"); } -int rs_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) + +static int crisv10_proc_show(struct seq_file *m, void *v) { - int i, len = 0, l; - off_t begin = 0; + int i; - len += sprintf(page, "serinfo:1.0 driver:%s\n", - serial_version); - for (i = 0; i < NR_PORTS && len < 4000; i++) { + seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); + + for (i = 0; i < NR_PORTS; i++) { if (!rs_table[i].enabled) continue; - l = line_info(page + len, &rs_table[i]); - len += l; - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + seq_line_info(m, &rs_table[i]); } #ifdef DEBUG_LOG_INCLUDED for (i = 0; i < debug_log_pos; i++) { - len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data)); - len += sprintf(page + len, debug_log[i].string, debug_log[i].value); - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + seq_printf(m, "%-4i %lu.%lu ", + i, debug_log[i].time, + timer_data_to_ns(debug_log[i].timer_data)); + seq_printf(m, debug_log[i].string, debug_log[i].value); } - len += sprintf(page + len, "debug_log %i/%i %li bytes\n", - i, DEBUG_LOG_SIZE, begin+len); + seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); debug_log_pos = 0; #endif + return 0; +} - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); +static int crisv10_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, crisv10_proc_show, NULL); } +static const struct file_operations crisv10_proc_fops = { + .owner = THIS_MODULE, + .open = crisv10_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + + /* Finally, routines used to initialize the serial driver. */ -static void -show_serial_version(void) +static void show_serial_version(void) { printk(KERN_INFO - "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n", + "ETRAX 100LX serial-driver %s, " + "(c) 2000-2004 Axis Communications AB\r\n", &serial_version[11]); /* "$Revision: x.yy" */ } @@ -4425,13 +4407,14 @@ static const struct tty_operations rs_ops = { .break_ctl = rs_break, .send_xchar = rs_send_xchar, .wait_until_sent = rs_wait_until_sent, - .read_proc = rs_read_proc, .tiocmget = rs_tiocmget, - .tiocmset = rs_tiocmset + .tiocmset = rs_tiocmset, +#ifdef CONFIG_PROC_FS + .proc_fops = &crisv10_proc_fops, +#endif }; -static int __init -rs_init(void) +static int __init rs_init(void) { int i; struct e100_serial *info; diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index 8871aaa..c0a3e27 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -130,8 +130,6 @@ struct jsm_board struct pci_dev *pci_dev; u32 maxports; /* MAX ports this board can handle */ - spinlock_t bd_lock; /* Used to protect board */ - spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and * the interrupt routine from each other. */ diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index d2d32a1..b3604aa 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -88,7 +88,6 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device else brd->maxports = 2; - spin_lock_init(&brd->bd_lock); spin_lock_init(&brd->bd_intr_lock); /* store which revision we have */ diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c index 32f3eaf..9e150b1 100644 --- a/drivers/serial/nwpserial.c +++ b/drivers/serial/nwpserial.c @@ -145,11 +145,13 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) ch = dcr_read(up->dcr_host, UART_RX); if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) tty_insert_flip_char(tty, ch, TTY_NORMAL); - } while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR); + } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); tty_flip_buffer_push(tty); ret = IRQ_HANDLED; + /* clear interrupt */ + dcr_write(up->dcr_host, UART_IIR, 1); out: spin_unlock(&up->port.lock); return ret; diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c index 06936d1..3e37852 100644 --- a/drivers/serial/s3c6400.c +++ b/drivers/serial/s3c6400.c @@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c6400_uart_inf = { .name = "Samsung S3C6400 UART", .type = PORT_S3C6400, .fifosize = 64, + .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, .rx_fifofull = S3C2440_UFSTAT_RXFULL, diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index e06686a..93b5d75 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -508,6 +508,7 @@ s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) struct baud_calc { struct s3c24xx_uart_clksrc *clksrc; unsigned int calc; + unsigned int divslot; unsigned int quot; struct clk *src; }; @@ -517,6 +518,7 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc, struct s3c24xx_uart_clksrc *clksrc, unsigned int baud) { + struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long rate; calc->src = clk_get(port->dev, clksrc->name); @@ -527,8 +529,24 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc, rate /= clksrc->divisor; calc->clksrc = clksrc; - calc->quot = (rate + (8 * baud)) / (16 * baud); - calc->calc = (rate / (calc->quot * 16)); + + if (ourport->info->has_divslot) { + unsigned long div = rate / baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we calculated + * by not multiplying the baud by 16) as it is easy enough + * to recalculate. + */ + + calc->quot = div / 16; + calc->calc = rate / div; + } else { + calc->quot = (rate + (8 * baud)) / (16 * baud); + calc->calc = (rate / (calc->quot * 16)); + } calc->quot--; return 1; @@ -611,6 +629,30 @@ static unsigned int s3c24xx_serial_getclk(struct uart_port *port, return best->quot; } +/* udivslot_table[] + * + * This table takes the fractional value of the baud divisor and gives + * the recommended setting for the UDIVSLOT register. + */ +static u16 udivslot_table[16] = { + [0] = 0x0000, + [1] = 0x0080, + [2] = 0x0808, + [3] = 0x0888, + [4] = 0x2222, + [5] = 0x4924, + [6] = 0x4A52, + [7] = 0x54AA, + [8] = 0x5555, + [9] = 0xD555, + [10] = 0xD5D5, + [11] = 0xDDD5, + [12] = 0xDDDD, + [13] = 0xDFDD, + [14] = 0xDFDF, + [15] = 0xFFDF, +}; + static void s3c24xx_serial_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -623,6 +665,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, unsigned int baud, quot; unsigned int ulcon; unsigned int umcon; + unsigned int udivslot = 0; /* * We don't support modem control lines. @@ -644,6 +687,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, /* check to see if we need to change clock source */ if (ourport->clksrc != clksrc || ourport->baudclk != clk) { + dbg("selecting clock %p\n", clk); s3c24xx_serial_setsource(port, clksrc); if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { @@ -658,6 +702,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; } + if (ourport->info->has_divslot) { + unsigned int div = ourport->baudclk_rate / baud; + + udivslot = udivslot_table[div & 15]; + dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); + } + switch (termios->c_cflag & CSIZE) { case CS5: dbg("config: 5bits/char\n"); @@ -697,12 +748,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, spin_lock_irqsave(&port->lock, flags); - dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot); + dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", + ulcon, quot, udivslot); wr_regl(port, S3C2410_ULCON, ulcon); wr_regl(port, S3C2410_UBRDIV, quot); wr_regl(port, S3C2410_UMCON, umcon); + if (ourport->info->has_divslot) + wr_regl(port, S3C2443_DIVSLOT, udivslot); + dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", rd_regl(port, S3C2410_ULCON), rd_regl(port, S3C2410_UCON), diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h index 571d6b9..7afb948 100644 --- a/drivers/serial/samsung.h +++ b/drivers/serial/samsung.h @@ -21,6 +21,10 @@ struct s3c24xx_uart_info { unsigned long tx_fifoshift; unsigned long tx_fifofull; + /* uart port features */ + + unsigned int has_divslot:1; + /* clock source control */ int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 885194a..3f3c08c 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1373,6 +1373,9 @@ static void cleanup(struct spi_device *spi) { struct chip_data *chip = spi_get_ctldata(spi); + if (!chip) + return; + if (gpio_is_valid(chip->gpio_cs)) gpio_free(chip->gpio_cs); diff --git a/drivers/staging/comedi/TODO b/drivers/staging/comedi/TODO index 5578129..15c9348 100644 --- a/drivers/staging/comedi/TODO +++ b/drivers/staging/comedi/TODO @@ -11,4 +11,3 @@ Please send patches to Greg Kroah-Hartman <greg@kroah.com> and copy: Ian Abbott <abbotti@mev.co.uk> Frank Mori Hess <fmhess@users.sourceforge.net> - David Schleef <ds@schleef.org> diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h index a42caa3..a69cf33 100644 --- a/drivers/staging/rt2870/rt2870.h +++ b/drivers/staging/rt2870/rt2870.h @@ -145,6 +145,7 @@ {USB_DEVICE(0x0789,0x0162)}, /* Logitec */ \ {USB_DEVICE(0x0789,0x0163)}, /* Logitec */ \ {USB_DEVICE(0x0789,0x0164)}, /* Logitec */ \ + {USB_DEVICE(0x7392,0x7717)}, /* Edimax */ \ { }/* Terminating entry */ \ } diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h index 12215fc..db446b7 100644 --- a/drivers/staging/rtl8187se/r8180.h +++ b/drivers/staging/rtl8187se/r8180.h @@ -19,7 +19,7 @@ #define R8180H -#define RTL8180_MODULE_NAME "rtl8180" +#define RTL8180_MODULE_NAME "r8180" #define DMESG(x,a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a) #define DMESGW(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a) #define DMESGE(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a) diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 6ecd12d..e10413c 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -640,11 +640,9 @@ void rtl8180_proc_init_one(struct net_device *dev) { struct proc_dir_entry *e; struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - priv->dir_dev = create_proc_entry(dev->name, - S_IFDIR | S_IRUGO | S_IXUGO, - rtl8180_proc); + priv->dir_dev = rtl8180_proc; if (!priv->dir_dev) { - DMESGE("Unable to initialize /proc/net/rtl8180/%s\n", + DMESGE("Unable to initialize /proc/net/r8180/%s\n", dev->name); return; } @@ -654,7 +652,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/stats-hw\n", + "/proc/net/r8180/%s/stats-hw\n", dev->name); } @@ -663,7 +661,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/stats-rx\n", + "/proc/net/r8180/%s/stats-rx\n", dev->name); } @@ -673,7 +671,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/stats-tx\n", + "/proc/net/r8180/%s/stats-tx\n", dev->name); } #if 0 @@ -702,7 +700,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/registers\n", + "/proc/net/r8180/%s/registers\n", dev->name); } } @@ -977,13 +975,6 @@ void check_tx_ring(struct net_device *dev, int pri) *tmp & (1<<15)? "ok": "err", *(tmp+4)); } - DMESG("nic at %d", - (nic-nicbegin) / 8 /4); - DMESG("tail at %d", ((int)tail - (int)begin) /8 /4); - DMESG("head at %d", ((int)head - (int)begin) /8 /4); - DMESG("check free desc returns %d", check_nic_enought_desc(dev,pri)); - DMESG("free desc is %d\n", get_curr_tx_free_desc(dev,pri)); - //rtl8180_reset(dev); return; } @@ -1736,17 +1727,7 @@ short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count, * descriptor's buffer must be 256 byte aligned * we shouldn't be here, since we set DMA mask ! */ - DMESGW("Fixing TX alignment"); - desc = (u32*)((u8*)desc + 256); -#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR)) - desc = (u32*)((u64)desc &~ 0xff); - dma_desc = (dma_addr_t)((u8*)dma_desc + 256); - dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff); -#else - desc = (u32*)((u32)desc &~ 0xff); - dma_desc = (dma_addr_t)((u8*)dma_desc + 256); - dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff); -#endif + WARN(1, "DMA buffer is not aligned\n"); } tmp=desc; for (i=0;i<count;i++) @@ -1984,18 +1965,7 @@ short alloc_rx_desc_ring(struct net_device *dev, u16 bufsize, int count) * descriptor's buffer must be 256 byte aligned * should never happen since we specify the DMA mask */ - - DMESGW("Fixing RX alignment"); - desc = (u32*)((u8*)desc + 256); -#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR)) - desc = (u32*)((u64)desc &~ 0xff); - dma_desc = (dma_addr_t)((u8*)dma_desc + 256); - dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff); -#else - desc = (u32*)((u32)desc &~ 0xff); - dma_desc = (dma_addr_t)((u8*)dma_desc + 256); - dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff); -#endif + WARN(1, "DMA buffer is not aligned\n"); } priv->rxring=desc; diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index 9c3f9439..3b2d528 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -386,7 +386,7 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id if (err) goto error_free_hw; - usb_set_intfdata(intf, priv); + usb_set_intfdata(intf, dev); return 0; @@ -415,10 +415,15 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter) static void wb35_disconnect(struct usb_interface *intf) { - struct wbsoft_priv *priv = usb_get_intfdata(intf); + struct ieee80211_hw *hw = usb_get_intfdata(intf); + struct wbsoft_priv *priv = hw->priv; wb35_hw_halt(priv); + ieee80211_stop_queues(hw); + ieee80211_unregister_hw(hw); + ieee80211_free_hw(hw); + usb_set_intfdata(intf, NULL); usb_put_dev(interface_to_usbdev(intf)); } diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 89299a5..0716cdb 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -27,6 +27,8 @@ obj-$(CONFIG_USB_WUSB) += wusbcore/ obj-$(CONFIG_USB_ACM) += class/ obj-$(CONFIG_USB_PRINTER) += class/ +obj-$(CONFIG_USB_WDM) += class/ +obj-$(CONFIG_USB_TMC) += class/ obj-$(CONFIG_USB_STORAGE) += storage/ obj-$(CONFIG_USB) += storage/ diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 6789089..56802d2 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -227,8 +227,14 @@ static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf) static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf) { - return snprintf(buf, PAGE_SIZE, "%d.%02u\n", - value / 100, abs(value) % 100); + if (likely(value >= 0)) { + return snprintf(buf, PAGE_SIZE, "%u.%02u\n", + value / 100, value % 100); + } else { + value = -value; + return snprintf(buf, PAGE_SIZE, "-%u.%02u\n", + value / 100, value % 100); + } } static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf) diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 4154be3..58c4d37 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -38,7 +38,7 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len) uchar = (c & 0x1f) << 6; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c; @@ -49,13 +49,13 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len) uchar = (c & 0x0f) << 12; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c << 6; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8100f1d..0ab8474b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -56,6 +56,7 @@ static __u16 vendor = FTDI_VID; static __u16 product; struct ftdi_private { + struct kref kref; ftdi_chip_type_t chip_type; /* type of device, either SIO or FT8U232AM */ int baud_base; /* baud base clock for divisor setting */ @@ -669,6 +670,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(ADI_VID, ADI_GNICE_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, + { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -1352,6 +1355,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) return -ENOMEM; } + kref_init(&priv->kref); spin_lock_init(&priv->rx_lock); spin_lock_init(&priv->tx_lock); init_waitqueue_head(&priv->delta_msr_wait); @@ -1468,6 +1472,13 @@ static void ftdi_shutdown(struct usb_serial *serial) dbg("%s", __func__); } +static void ftdi_sio_priv_release(struct kref *k) +{ + struct ftdi_private *priv = container_of(k, struct ftdi_private, kref); + + kfree(priv); +} + static int ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1482,7 +1493,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) if (priv) { usb_set_serial_port_data(port, NULL); - kfree(priv); + kref_put(&priv->kref, ftdi_sio_priv_release); } return 0; @@ -1547,7 +1558,8 @@ static int ftdi_open(struct tty_struct *tty, dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); - + else + kref_get(&priv->kref); return result; } /* ftdi_open */ @@ -1589,11 +1601,11 @@ static void ftdi_close(struct tty_struct *tty, mutex_unlock(&port->serial->disc_mutex); /* cancel any scheduled reading */ - cancel_delayed_work(&priv->rx_work); - flush_scheduled_work(); + cancel_delayed_work_sync(&priv->rx_work); /* shutdown our bulk read */ usb_kill_urb(port->read_urb); + kref_put(&priv->kref, ftdi_sio_priv_release); } /* ftdi_close */ diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index c09f658..12330fa1 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -920,6 +920,12 @@ #define JETI_SPC1201_PID 0x04b2 /* + * Marvell SheevaPlug + */ +#define MARVELL_VID 0x9e88 +#define MARVELL_SHEEVAPLUG_PID 0x9e8f + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fa65a3b..4b8b690 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -160,8 +160,9 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* Reported by Andrew Nayenko <relan@bk.ru> */ -UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592, +/* Reported by Andrew Nayenko <relan@bk.ru> + * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */ +UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610, "Nokia", "Nokia 6288", US_SC_DEVICE, US_PR_DEVICE, NULL, diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 7826bdc..0048f11 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1128,13 +1128,6 @@ config FB_INTEL 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. Say Y if you have and plan to use such a board. - If you say Y here and want DDC/I2C support you must first say Y to - "I2C support" and "I2C bit-banging support" in the character devices - section. - - If you say M here then "I2C support" and "I2C bit-banging support" - can be build either as modules or built-in. - To compile this driver as a module, choose M here: the module will be called intelfb. @@ -1207,11 +1200,10 @@ config FB_MATROX_G pixel and 32 bpp packed pixel. You can also use font widths different from 8. - If you need support for G400 secondary head, you must first say Y to - "I2C support" in the character devices section, and then to - "Matrox I2C support" and "G400 second head support" here in the - framebuffer section. G450/G550 secondary head and digital output - are supported without additional modules. + If you need support for G400 secondary head, you must say Y to + "Matrox I2C support" and "G400 second head support" right below. + G450/G550 secondary head and digital output are supported without + additional modules. The driver starts in monitor mode. You must use the matroxset tool (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to @@ -1310,13 +1302,6 @@ config FB_RADEON a framebuffer device. There are both PCI and AGP versions. You don't need to choose this to run the Radeon in plain VGA mode. - If you say Y here and want DDC/I2C support you must first say Y to - "I2C support" and "I2C bit-banging support" in the character devices - section. - - If you say M here then "I2C support" and "I2C bit-banging support" - can be build either as modules or built-in. - There is a product page at http://apps.ati.com/ATIcompare/ diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 0dbd6c6..d8d0be5 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -56,7 +56,6 @@ obj-$(CONFIG_FB_CT65550) += chipsfb.o obj-$(CONFIG_FB_IMSTT) += imsttfb.o obj-$(CONFIG_FB_FM2) += fm2fb.o obj-$(CONFIG_FB_VT8623) += vt8623fb.o -obj-$(CONFIG_FB_CYBLA) += cyblafb.o obj-$(CONFIG_FB_TRIDENT) += tridentfb.o obj-$(CONFIG_FB_LE80578) += vermilion/ obj-$(CONFIG_FB_S3) += s3fb.o diff --git a/drivers/video/cfbfillrect.c b/drivers/video/cfbfillrect.c index 64b3576..ba9f58b 100644 --- a/drivers/video/cfbfillrect.c +++ b/drivers/video/cfbfillrect.c @@ -9,10 +9,6 @@ * * NOTES: * - * The code for depths like 24 that don't have integer number of pixels per - * long is broken and needs to be fixed. For now I turned these types of - * mode off. - * * Also need to add code to deal with cards endians that are different than * the native cpu endians. I also need to deal with MSB position in the word. * @@ -139,7 +135,7 @@ bitfill_unaligned(struct fb_info *p, unsigned long __iomem *dst, int dst_idx, // Trailing bits if (last) - FB_WRITEL(comp(pat, FB_READL(dst), first), dst); + FB_WRITEL(comp(pat, FB_READL(dst), last), dst); } } @@ -281,7 +277,7 @@ bitfill_unaligned_rev(struct fb_info *p, unsigned long __iomem *dst, void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) { - unsigned long pat, fg; + unsigned long pat, pat2, fg; unsigned long width = rect->width, height = rect->height; int bits = BITS_PER_LONG, bytes = bits >> 3; u32 bpp = p->var.bits_per_pixel; @@ -297,7 +293,7 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) else fg = rect->color; - pat = pixel_to_pat( bpp, fg); + pat = pixel_to_pat(bpp, fg); dst = (unsigned long __iomem *)((unsigned long)p->screen_base & ~(bytes-1)); dst_idx = ((unsigned long)p->screen_base & (bytes - 1))*8; @@ -333,17 +329,16 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) dst_idx += p->fix.line_length*8; } } else { - int right; - int r; - int rot = (left-dst_idx) % bpp; + int right, r; void (*fill_op)(struct fb_info *p, unsigned long __iomem *dst, int dst_idx, unsigned long pat, int left, int right, unsigned n, int bits) = NULL; - - /* rotate pattern to correct start position */ - pat = pat << rot | pat >> (bpp-rot); - - right = bpp-left; +#ifdef __LITTLE_ENDIAN + right = left; + left = bpp - right; +#else + right = bpp - left; +#endif switch (rect->rop) { case ROP_XOR: fill_op = bitfill_unaligned_rev; @@ -352,17 +347,18 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) fill_op = bitfill_unaligned; break; default: - printk( KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n"); + printk(KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n"); fill_op = bitfill_unaligned; break; } while (height--) { - dst += dst_idx >> (ffs(bits) - 1); + dst += dst_idx / bits; dst_idx &= (bits - 1); - fill_op(p, dst, dst_idx, pat, left, right, + r = dst_idx % bpp; + /* rotate pattern to the correct start position */ + pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp)); + fill_op(p, dst, dst_idx, pat2, left, right, width*bpp, bits); - r = (p->fix.line_length*8) % bpp; - pat = pat << (bpp-r) | pat >> r; dst_idx += p->fix.line_length*8; } } diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index d012edd..38e86b8 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1282,7 +1282,7 @@ static int vgacon_font_get(struct vc_data *c, struct console_font *font) font->charcount = vga_512_chars ? 512 : 256; if (!font->data) return 0; - return vgacon_do_font_op(&state, font->data, 0, 0); + return vgacon_do_font_op(&state, font->data, 0, vga_512_chars); } #else diff --git a/drivers/video/fb_draw.h b/drivers/video/fb_draw.h index 1db6221..04c01fa 100644 --- a/drivers/video/fb_draw.h +++ b/drivers/video/fb_draw.h @@ -33,11 +33,11 @@ pixel_to_pat( u32 bpp, u32 pixel) case 8: return 0x0101010101010101ul*pixel; case 12: - return 0x0001001001001001ul*pixel; + return 0x1001001001001001ul*pixel; case 16: return 0x0001000100010001ul*pixel; case 24: - return 0x0000000001000001ul*pixel; + return 0x0001000001000001ul*pixel; case 32: return 0x0000000100000001ul*pixel; default: @@ -58,11 +58,11 @@ pixel_to_pat( u32 bpp, u32 pixel) case 8: return 0x01010101ul*pixel; case 12: - return 0x00001001ul*pixel; + return 0x01001001ul*pixel; case 16: return 0x00010001ul*pixel; case 24: - return 0x00000001ul*pixel; + return 0x01000001ul*pixel; case 32: return 0x00000001ul*pixel; default: @@ -167,4 +167,17 @@ static inline unsigned long fb_rev_pixels_in_long(unsigned long val, #endif /* CONFIG_FB_CFB_REV_PIXELS_IN_BYTE */ +#define cpu_to_le_long _cpu_to_le_long(BITS_PER_LONG) +#define _cpu_to_le_long(x) __cpu_to_le_long(x) +#define __cpu_to_le_long(x) cpu_to_le##x + +#define le_long_to_cpu _le_long_to_cpu(BITS_PER_LONG) +#define _le_long_to_cpu(x) __le_long_to_cpu(x) +#define __le_long_to_cpu(x) le##x##_to_cpu + +static inline unsigned long rolx(unsigned long word, unsigned int shift, unsigned int x) +{ + return (word << shift) | (word >> (x - shift)); +} + #endif /* FB_DRAW_H */ diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index fe5b519..1a83709 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -75,7 +75,7 @@ struct gbefb_par { static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024; static void *gbe_mem; static dma_addr_t gbe_dma_addr; -unsigned long gbe_mem_phys; +static unsigned long gbe_mem_phys; static struct { uint16_t *cpu; @@ -185,8 +185,8 @@ static struct fb_videomode default_mode_LCD __initdata = { .vmode = FB_VMODE_NONINTERLACED, }; -struct fb_videomode *default_mode __initdata = &default_mode_CRT; -struct fb_var_screeninfo *default_var __initdata = &default_var_CRT; +static struct fb_videomode *default_mode __initdata = &default_mode_CRT; +static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT; static int flat_panel_enabled = 0; @@ -205,7 +205,7 @@ static void gbe_reset(void) * console. */ -void gbe_turn_off(void) +static void gbe_turn_off(void) { int i; unsigned int val, x, y, vpixen_off; @@ -1097,7 +1097,7 @@ static void gbefb_create_sysfs(struct device *dev) * Initialization */ -int __init gbefb_setup(char *options) +static int __init gbefb_setup(char *options) { char *this_opt; @@ -1283,7 +1283,7 @@ static struct platform_driver gbefb_driver = { static struct platform_device *gbefb_device; -int __init gbefb_init(void) +static int __init gbefb_init(void) { int ret = platform_driver_register(&gbefb_driver); if (!ret) { @@ -1301,7 +1301,7 @@ int __init gbefb_init(void) return ret; } -void __exit gbefb_exit(void) +static void __exit gbefb_exit(void) { platform_device_unregister(gbefb_device); platform_driver_unregister(&gbefb_driver); diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 21b3692..9894de1 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -1152,11 +1152,11 @@ static struct fb_ops mx3fb_ops = { */ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) { - struct mx3fb_data *drv_data = platform_get_drvdata(pdev); - struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; acquire_console_sem(); - fb_set_suspend(drv_data->fbi, 1); + fb_set_suspend(mx3fb->fbi, 1); release_console_sem(); if (mx3_fbi->blank == FB_BLANK_UNBLANK) { @@ -1172,16 +1172,16 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) */ static int mx3fb_resume(struct platform_device *pdev) { - struct mx3fb_data *drv_data = platform_get_drvdata(pdev); - struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; if (mx3_fbi->blank == FB_BLANK_UNBLANK) { sdc_enable_channel(mx3_fbi); - sdc_set_brightness(mx3fb, drv_data->backlight_level); + sdc_set_brightness(mx3fb, mx3fb->backlight_level); } acquire_console_sem(); - fb_set_suspend(drv_data->fbi, 0); + fb_set_suspend(mx3fb->fbi, 0); release_console_sem(); return 0; diff --git a/drivers/video/sysfillrect.c b/drivers/video/sysfillrect.c index f94d6b6..33ee3d3 100644 --- a/drivers/video/sysfillrect.c +++ b/drivers/video/sysfillrect.c @@ -124,7 +124,7 @@ bitfill_unaligned(struct fb_info *p, unsigned long *dst, int dst_idx, /* Trailing bits */ if (last) - *dst = comp(pat, *dst, first); + *dst = comp(pat, *dst, last); } } @@ -242,7 +242,7 @@ bitfill_unaligned_rev(struct fb_info *p, unsigned long *dst, int dst_idx, void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect) { - unsigned long pat, fg; + unsigned long pat, pat2, fg; unsigned long width = rect->width, height = rect->height; int bits = BITS_PER_LONG, bytes = bits >> 3; u32 bpp = p->var.bits_per_pixel; @@ -292,17 +292,16 @@ void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect) dst_idx += p->fix.line_length*8; } } else { - int right; - int r; - int rot = (left-dst_idx) % bpp; + int right, r; void (*fill_op)(struct fb_info *p, unsigned long *dst, int dst_idx, unsigned long pat, int left, int right, unsigned n, int bits) = NULL; - - /* rotate pattern to correct start position */ - pat = pat << rot | pat >> (bpp-rot); - - right = bpp-left; +#ifdef __LITTLE_ENDIAN + right = left; + left = bpp - right; +#else + right = bpp - left; +#endif switch (rect->rop) { case ROP_XOR: fill_op = bitfill_unaligned_rev; @@ -311,18 +310,19 @@ void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect) fill_op = bitfill_unaligned; break; default: - printk(KERN_ERR "cfb_fillrect(): unknown rop, " + printk(KERN_ERR "sys_fillrect(): unknown rop, " "defaulting to ROP_COPY\n"); fill_op = bitfill_unaligned; break; } while (height--) { - dst += dst_idx >> (ffs(bits) - 1); + dst += dst_idx / bits; dst_idx &= (bits - 1); - fill_op(p, dst, dst_idx, pat, left, right, + r = dst_idx % bpp; + /* rotate pattern to the correct start position */ + pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp)); + fill_op(p, dst, dst_idx, pat2, left, right, width*bpp, bits); - r = (p->fix.line_length*8) % bpp; - pat = pat << (bpp-r) | pat >> r; dst_idx += p->fix.line_length*8; } } diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index e327b848..a0fec29 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -2103,7 +2103,7 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry) static int __devinit via_pci_probe(void) { - unsigned int default_xres, default_yres; + unsigned long default_xres, default_yres; char *tmpc, *tmpm; char *tmpc_sec, *tmpm_sec; int vmode_index; @@ -2196,8 +2196,8 @@ static int __devinit via_pci_probe(void) viafb_FB_MM = viaparinfo->fbmem_virt; tmpm = viafb_mode; tmpc = strsep(&tmpm, "x"); - strict_strtoul(tmpc, 0, (unsigned long *)&default_xres); - strict_strtoul(tmpm, 0, (unsigned long *)&default_yres); + strict_strtoul(tmpc, 0, &default_xres); + strict_strtoul(tmpm, 0, &default_yres); vmode_index = viafb_get_mode_index(default_xres, default_yres, 0); DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index); diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index efa4b36..f5bbd9e 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -513,7 +513,8 @@ static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr char *buf) { return sprintf(buf, "%llu\n", - (u64)balloon_stats.target_pages << PAGE_SHIFT); + (unsigned long long)balloon_stats.target_pages + << PAGE_SHIFT); } static ssize_t store_target(struct sys_device *dev, |
