diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/leds/leds-lp5521.c | 821 |
1 files changed, 821 insertions, 0 deletions
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c new file mode 100644 index 0000000..3782f31 --- /dev/null +++ b/drivers/leds/leds-lp5521.c @@ -0,0 +1,821 @@ +/* + * LP5521 LED chip driver. + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/ctype.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <linux/leds.h> +#include <linux/leds-lp5521.h> +#include <linux/workqueue.h> +#include <linux/slab.h> + +#define LP5521_PROGRAM_LENGTH 32 /* in bytes */ + +#define LP5521_MAX_LEDS 3 /* Maximum number of LEDs */ +#define LP5521_MAX_ENGINES 3 /* Maximum number of engines */ + +#define LP5521_ENG_MASK_BASE 0x30 /* 00110000 */ +#define LP5521_ENG_STATUS_MASK 0x07 /* 00000111 */ + +#define LP5521_CMD_LOAD 0x15 /* 00010101 */ +#define LP5521_CMD_RUN 0x2a /* 00101010 */ +#define LP5521_CMD_DIRECT 0x3f /* 00111111 */ +#define LP5521_CMD_DISABLED 0x00 /* 00000000 */ + +/* Registers */ +#define LP5521_REG_ENABLE 0x00 +#define LP5521_REG_OP_MODE 0x01 +#define LP5521_REG_R_PWM 0x02 +#define LP5521_REG_G_PWM 0x03 +#define LP5521_REG_B_PWM 0x04 +#define LP5521_REG_R_CURRENT 0x05 +#define LP5521_REG_G_CURRENT 0x06 +#define LP5521_REG_B_CURRENT 0x07 +#define LP5521_REG_CONFIG 0x08 +#define LP5521_REG_R_CHANNEL_PC 0x09 +#define LP5521_REG_G_CHANNEL_PC 0x0A +#define LP5521_REG_B_CHANNEL_PC 0x0B +#define LP5521_REG_STATUS 0x0C +#define LP5521_REG_RESET 0x0D +#define LP5521_REG_GPO 0x0E +#define LP5521_REG_R_PROG_MEM 0x10 +#define LP5521_REG_G_PROG_MEM 0x30 +#define LP5521_REG_B_PROG_MEM 0x50 + +#define LP5521_PROG_MEM_BASE LP5521_REG_R_PROG_MEM +#define LP5521_PROG_MEM_SIZE 0x20 + +/* Base register to set LED current */ +#define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT + +/* Base register to set the brightness */ +#define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM + +/* Bits in ENABLE register */ +#define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */ +#define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */ +#define LP5521_EXEC_RUN 0x2A + +/* Bits in CONFIG register */ +#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ +#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ +#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ +#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ +#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ +#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ +#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ +#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ +#define LP5521_CLK_INT 1 /* Internal clock */ +#define LP5521_CLK_AUTO 2 /* Automatic clock selection */ + +/* Status */ +#define LP5521_EXT_CLK_USED 0x08 + +struct lp5521_engine { + const struct attribute_group *attributes; + int id; + u8 mode; + u8 prog_page; + u8 engine_mask; +}; + +struct lp5521_led { + int id; + u8 chan_nr; + u8 led_current; + u8 max_current; + struct led_classdev cdev; + struct work_struct brightness_work; + u8 brightness; +}; + +struct lp5521_chip { + struct lp5521_platform_data *pdata; + struct mutex lock; /* Serialize control */ + struct i2c_client *client; + struct lp5521_engine engines[LP5521_MAX_ENGINES]; + struct lp5521_led leds[LP5521_MAX_LEDS]; + u8 num_channels; + u8 num_leds; +}; + +#define cdev_to_led(c) container_of(c, struct lp5521_led, cdev) +#define engine_to_lp5521(eng) container_of((eng), struct lp5521_chip, \ + engines[(eng)->id - 1]) +#define led_to_lp5521(led) container_of((led), struct lp5521_chip, \ + leds[(led)->id]) + +static void lp5521_led_brightness_work(struct work_struct *work); + +static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf) +{ + s32 ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) + return -EIO; + + *buf = ret; + return 0; +} + +static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode) +{ + struct lp5521_chip *chip = engine_to_lp5521(engine); + struct i2c_client *client = chip->client; + int ret; + u8 engine_state; + + /* Only transition between RUN and DIRECT mode are handled here */ + if (mode == LP5521_CMD_LOAD) + return 0; + + if (mode == LP5521_CMD_DISABLED) + mode = LP5521_CMD_DIRECT; + + ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state); + + /* set mode only for this engine */ + engine_state &= ~(engine->engine_mask); + mode &= engine->engine_mask; + engine_state |= mode; + ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state); + + return ret; +} + +static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern) +{ + struct lp5521_chip *chip = engine_to_lp5521(eng); + struct i2c_client *client = chip->client; + int ret; + int addr; + u8 mode; + + /* move current engine to direct mode and remember the state */ + ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT); + usleep_range(1000, 10000); + ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode); + + /* For loading, all the engines to load mode */ + lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); + usleep_range(1000, 10000); + lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); + usleep_range(1000, 10000); + + addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE; + i2c_smbus_write_i2c_block_data(client, + addr, + LP5521_PROG_MEM_SIZE, + pattern); + + ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode); + return ret; +} + +static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr) +{ + return lp5521_write(chip->client, + LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, + curr); +} + +static void lp5521_init_engine(struct lp5521_chip *chip, + const struct attribute_group *attr_group) +{ + int i; + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { + chip->engines[i].id = i + 1; + chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2); + chip->engines[i].prog_page = i; + chip->engines[i].attributes = &attr_group[i]; + } +} + +static int lp5521_configure(struct i2c_client *client, + const struct attribute_group *attr_group) +{ + struct lp5521_chip *chip = i2c_get_clientdata(client); + int ret; + + lp5521_init_engine(chip, attr_group); + + lp5521_write(client, LP5521_REG_RESET, 0xff); + + usleep_range(10000, 20000); + + /* Set all PWMs to direct control mode */ + ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F); + + /* Enable auto-powersave, set charge pump to auto, red to battery */ + ret |= lp5521_write(client, LP5521_REG_CONFIG, + LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); + + /* Initialize all channels PWM to zero -> leds off */ + ret |= lp5521_write(client, LP5521_REG_R_PWM, 0); + ret |= lp5521_write(client, LP5521_REG_G_PWM, 0); + ret |= lp5521_write(client, LP5521_REG_B_PWM, 0); + + /* Set engines are set to run state when OP_MODE enables engines */ + ret |= lp5521_write(client, LP5521_REG_ENABLE, + LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM | + LP5521_EXEC_RUN); + /* enable takes 500us */ + usleep_range(500, 20000); + + return ret; +} + +static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf) +{ + int ret; + u8 status; + + ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status); + if (ret < 0) + return ret; + + /* Check that ext clock is really in use if requested */ + if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT) + if ((status & LP5521_EXT_CLK_USED) == 0) + return -EIO; + return 0; +} + +static void lp5521_set_brightness(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct lp5521_led *led = cdev_to_led(cdev); + led->brightness = (u8)brightness; + schedule_work(&led->brightness_work); +} + +static void lp5521_led_brightness_work(struct work_struct *work) +{ + struct lp5521_led *led = container_of(work, + struct lp5521_led, + brightness_work); + struct lp5521_chip *chip = led_to_lp5521(led); + struct i2c_client *client = chip->client; + + mutex_lock(&chip->lock); + lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr, + led->brightness); + mutex_unlock(&chip->lock); +} + +/* Detect the chip by setting its ENABLE register and reading it back. */ +static int lp5521_detect(struct i2c_client *client) +{ + int ret; + u8 buf; + + ret = lp5521_write(client, LP5521_REG_ENABLE, + LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM); + if (ret) + return ret; + usleep_range(1000, 10000); + ret = lp5521_read(client, LP5521_REG_ENABLE, &buf); + if (ret) + return ret; + if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM)) + return -ENODEV; + + return 0; +} + +/* Set engine mode and create appropriate sysfs attributes, if required. */ +static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode) +{ + struct lp5521_chip *chip = engine_to_lp5521(engine); + struct i2c_client *client = chip->client; + struct device *dev = &client->dev; + int ret = 0; + + /* if in that mode already do nothing, except for run */ + if (mode == engine->mode && mode != LP5521_CMD_RUN) + return 0; + + if (mode == LP5521_CMD_RUN) { + ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN); + } else if (mode == LP5521_CMD_LOAD) { + lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); + lp5521_set_engine_mode(engine, LP5521_CMD_LOAD); + + ret = sysfs_create_group(&dev->kobj, engine->attributes); + if (ret) + return ret; + } else if (mode == LP5521_CMD_DISABLED) { + lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); + } + + /* remove load attribute from sysfs if not in load mode */ + if (engine->mode == LP5521_CMD_LOAD && mode != LP5521_CMD_LOAD) + sysfs_remove_group(&dev->kobj, engine->attributes); + + engine->mode = mode; + + return ret; +} + +static int lp5521_do_store_load(struct lp5521_engine *engine, + const char *buf, size_t len) +{ + struct lp5521_chip *chip = engine_to_lp5521(engine); + struct i2c_client *client = chip->client; + int ret, nrchars, offset = 0, i = 0; + char c[3]; + unsigned cmd; + u8 pattern[LP5521_PROGRAM_LENGTH] = {0}; + + while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) { + /* separate sscanfs because length is working only for %s */ + ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); + ret = sscanf(c, "%2x", &cmd); + if (ret != 1) + goto fail; + pattern[i] = (u8)cmd; + + offset += nrchars; + i++; + } + + /* Each instruction is 16bit long. Check that length is even */ + if (i % 2) + goto fail; + + mutex_lock(&chip->lock); + ret = lp5521_load_program(engine, pattern); + mutex_unlock(&chip->lock); + + if (ret) { + dev_err(&client->dev, "failed loading pattern\n"); + return ret; + } + + return len; +fail: + dev_err(&client->dev, "wrong pattern format\n"); + return -EINVAL; +} + +static ssize_t store_engine_load(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + return lp5521_do_store_load(&chip->engines[nr - 1], buf, len); +} + +#define store_load(nr) \ +static ssize_t store_engine##nr##_load(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_load(dev, attr, buf, len, nr); \ +} +store_load(1) +store_load(2) +store_load(3) + +static ssize_t show_engine_mode(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + switch (chip->engines[nr - 1].mode) { + case LP5521_CMD_RUN: + return sprintf(buf, "run\n"); + case LP5521_CMD_LOAD: + return sprintf(buf, "load\n"); + case LP5521_CMD_DISABLED: + return sprintf(buf, "disabled\n"); + default: + return sprintf(buf, "disabled\n"); + } +} + +#define show_mode(nr) \ +static ssize_t show_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + return show_engine_mode(dev, attr, buf, nr); \ +} +show_mode(1) +show_mode(2) +show_mode(3) + +static ssize_t store_engine_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + struct lp5521_engine *engine = &chip->engines[nr - 1]; + mutex_lock(&chip->lock); + + if (!strncmp(buf, "run", 3)) + lp5521_set_mode(engine, LP5521_CMD_RUN); + else if (!strncmp(buf, "load", 4)) + lp5521_set_mode(engine, LP5521_CMD_LOAD); + else if (!strncmp(buf, "disabled", 8)) + lp5521_set_mode(engine, LP5521_CMD_DISABLED); + + mutex_unlock(&chip->lock); + return len; +} + +#define store_mode(nr) \ +static ssize_t store_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_mode(dev, attr, buf, len, nr); \ +} +store_mode(1) +store_mode(2) +store_mode(3) + +static ssize_t show_max_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5521_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->max_current); +} + +static ssize_t show_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5521_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->led_current); +} + +static ssize_t store_current(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5521_led *led = cdev_to_led(led_cdev); + struct lp5521_chip *chip = led_to_lp5521(led); + ssize_t ret; + unsigned long curr; + + if (strict_strtoul(buf, 0, &curr)) + return -EINVAL; + + if (curr > led->max_current) + return -EINVAL; + + mutex_lock(&chip->lock); + ret = lp5521_set_led_current(chip, led->id, curr); + mutex_unlock(&chip->lock); + + if (ret < 0) + return ret; + + led->led_current = (u8)curr; + + return len; +} + +static ssize_t lp5521_selftest(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + int ret; + + mutex_lock(&chip->lock); + ret = lp5521_run_selftest(chip, buf); + mutex_unlock(&chip->lock); + return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); +} + +/* led class device attributes */ +static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current); +static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); + +static struct attribute *lp5521_led_attributes[] = { + &dev_attr_led_current.attr, + &dev_attr_max_current.attr, + NULL, +}; + +static struct attribute_group lp5521_led_attribute_group = { + .attrs = lp5521_led_attributes +}; + +/* device attributes */ +static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO, + show_engine1_mode, store_engine1_mode); +static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO, + show_engine2_mode, store_engine2_mode); +static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO, + show_engine3_mode, store_engine3_mode); +static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load); +static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load); +static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load); +static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL); + +static struct attribute *lp5521_attributes[] = { + &dev_attr_engine1_mode.attr, + &dev_attr_engine2_mode.attr, + &dev_attr_engine3_mode.attr, + &dev_attr_selftest.attr, + NULL +}; + +static struct attribute *lp5521_engine1_attributes[] = { + &dev_attr_engine1_load.attr, + NULL +}; + +static struct attribute *lp5521_engine2_attributes[] = { + &dev_attr_engine2_load.attr, + NULL +}; + +static struct attribute *lp5521_engine3_attributes[] = { + &dev_attr_engine3_load.attr, + NULL +}; + +static const struct attribute_group lp5521_group = { + .attrs = lp5521_attributes, +}; + +static const struct attribute_group lp5521_engine_group[] = { + {.attrs = lp5521_engine1_attributes }, + {.attrs = lp5521_engine2_attributes }, + {.attrs = lp5521_engine3_attributes }, +}; + +static int lp5521_register_sysfs(struct i2c_client *client) +{ + struct device *dev = &client->dev; + return sysfs_create_group(&dev->kobj, &lp5521_group); +} + +static void lp5521_unregister_sysfs(struct i2c_client *client) +{ + struct lp5521_chip *chip = i2c_get_clientdata(client); + struct device *dev = &client->dev; + int i; + + sysfs_remove_group(&dev->kobj, &lp5521_group); + + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { + if (chip->engines[i].mode == LP5521_CMD_LOAD) + sysfs_remove_group(&dev->kobj, + chip->engines[i].attributes); + } + + for (i = 0; i < chip->num_leds; i++) + sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, + &lp5521_led_attribute_group); +} + +static int __init lp5521_init_led(struct lp5521_led *led, + struct i2c_client *client, + int chan, struct lp5521_platform_data *pdata) +{ + struct device *dev = &client->dev; + char name[32]; + int res; + + if (chan >= LP5521_MAX_LEDS) + return -EINVAL; + + if (pdata->led_config[chan].led_current == 0) + return 0; + + led->led_current = pdata->led_config[chan].led_current; + led->max_current = pdata->led_config[chan].max_current; + led->chan_nr = pdata->led_config[chan].chan_nr; + + if (led->chan_nr >= LP5521_MAX_LEDS) { + dev_err(dev, "Use channel numbers between 0 and %d\n", + LP5521_MAX_LEDS - 1); + return -EINVAL; + } + + snprintf(name, sizeof(name), "%s:channel%d", client->name, chan); + led->cdev.brightness_set = lp5521_set_brightness; + led->cdev.name = name; + res = led_classdev_register(dev, &led->cdev); + if (res < 0) { + dev_err(dev, "couldn't register led on channel %d\n", chan); + return res; + } + + res = sysfs_create_group(&led->cdev.dev->kobj, + &lp5521_led_attribute_group); + if (res < 0) { + dev_err(dev, "couldn't register current attribute\n"); + led_classdev_unregister(&led->cdev); + return res; + } + return 0; +} + +static int lp5521_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lp5521_chip *chip; + struct lp5521_platform_data *pdata; + int ret, i, led; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + chip->client = client; + + pdata = client->dev.platform_data; + + if (!pdata) { + dev_err(&client->dev, "no platform data\n"); + ret = -EINVAL; + goto fail1; + } + + mutex_init(&chip->lock); + + chip->pdata = pdata; + + if (pdata->setup_resources) { + ret = pdata->setup_resources(); + if (ret < 0) + goto fail1; + } + + if (pdata->enable) { + pdata->enable(0); + usleep_range(1000, 10000); + pdata->enable(1); + usleep_range(1000, 10000); /* Spec says min 500us */ + } + + ret = lp5521_detect(client); + + if (ret) { + dev_err(&client->dev, "Chip not found\n"); + goto fail2; + } + + dev_info(&client->dev, "%s programmable led chip found\n", id->name); + + ret = lp5521_configure(client, lp5521_engine_group); + if (ret < 0) { + dev_err(&client->dev, "error configuring chip\n"); + goto fail2; + } + + /* Initialize leds */ + chip->num_channels = pdata->num_channels; + chip->num_leds = 0; + led = 0; + for (i = 0; i < pdata->num_channels; i++) { + /* Do not initialize channels that are not connected */ + if (pdata->led_config[i].led_current == 0) + continue; + + ret = lp5521_init_led(&chip->leds[led], client, i, pdata); + if (ret) { + dev_err(&client->dev, "error initializing leds\n"); + goto fail3; + } + chip->num_leds++; + + chip->leds[led].id = led; + /* Set initial LED current */ + lp5521_set_led_current(chip, led, + chip->leds[led].led_current); + + INIT_WORK(&(chip->leds[led].brightness_work), + lp5521_led_brightness_work); + + led++; + } + + ret = lp5521_register_sysfs(client); + if (ret) { + dev_err(&client->dev, "registering sysfs failed\n"); + goto fail3; + } + return ret; +fail3: + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } +fail2: + if (pdata->enable) + pdata->enable(0); + if (pdata->release_resources) + pdata->release_resources(); +fail1: + kfree(chip); + return ret; +} + +static int lp5521_remove(struct i2c_client *client) +{ + struct lp5521_chip *chip = i2c_get_clientdata(client); + int i; + + lp5521_unregister_sysfs(client); + + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } + + if (chip->pdata->enable) + chip->pdata->enable(0); + if (chip->pdata->release_resources) + chip->pdata->release_resources(); + kfree(chip); + return 0; +} + +static const struct i2c_device_id lp5521_id[] = { + { "lp5521", 0 }, /* Three channel chip */ + { } +}; +MODULE_DEVICE_TABLE(i2c, lp5521_id); + +static struct i2c_driver lp5521_driver = { + .driver = { + .name = "lp5521", + }, + .probe = lp5521_probe, + .remove = lp5521_remove, + .id_table = lp5521_id, +}; + +static int __init lp5521_init(void) +{ + int ret; + + ret = i2c_add_driver(&lp5521_driver); + + if (ret < 0) + printk(KERN_ALERT "Adding lp5521 driver failed\n"); + + return ret; +} + +static void __exit lp5521_exit(void) +{ + i2c_del_driver(&lp5521_driver); +} + +module_init(lp5521_init); +module_exit(lp5521_exit); + +MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo"); +MODULE_DESCRIPTION("LP5521 LED engine"); +MODULE_LICENSE("GPL v2"); |