summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/isdn/hardware/eicon/maintidi.c5
-rw-r--r--drivers/isdn/hardware/eicon/message.c18
-rw-r--r--drivers/isdn/hisax/amd7930_fn.c1
-rw-r--r--drivers/isdn/hisax/diva.c2
-rw-r--r--drivers/isdn/hisax/hfc_usb.c4
-rw-r--r--drivers/isdn/hisax/hscx_irq.c2
-rw-r--r--drivers/isdn/hisax/icc.c1
-rw-r--r--drivers/isdn/mISDN/stack.c2
-rw-r--r--drivers/net/benet/be_cmds.h2
-rw-r--r--drivers/net/davinci_emac.c2
-rw-r--r--drivers/net/e100.c26
-rw-r--r--drivers/net/e1000e/defines.h2
-rw-r--r--drivers/net/e1000e/e1000.h14
-rw-r--r--drivers/net/e1000e/hw.h1
-rw-r--r--drivers/net/e1000e/ich8lan.c482
-rw-r--r--drivers/net/e1000e/phy.c15
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c2
-rw-r--r--drivers/net/r8169.c2
-rw-r--r--drivers/net/sky2.c2
-rw-r--r--drivers/net/tokenring/ibmtr.c11
-rw-r--r--drivers/net/usb/Kconfig2
-rw-r--r--drivers/net/usb/cdc_ether.c42
-rw-r--r--drivers/net/virtio_net.c6
-rw-r--r--drivers/net/wireless/ath/ath9k/rc.c2
-rw-r--r--drivers/net/wireless/b43/dma.c15
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c5
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2200.c2
-rw-r--r--drivers/net/wireless/ipw2x00/libipw.h1
-rw-r--r--drivers/net/wireless/ipw2x00/libipw_module.c14
-rw-r--r--drivers/net/wireless/libertas/if_usb.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c5
-rw-r--r--drivers/serial/serial_cs.c8
32 files changed, 546 insertions, 154 deletions
diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c
index 23960cb..41c26e7 100644
--- a/drivers/isdn/hardware/eicon/maintidi.c
+++ b/drivers/isdn/hardware/eicon/maintidi.c
@@ -959,8 +959,9 @@ static int process_idi_event (diva_strace_context_t* pLib,
}
if (!strncmp("State\\Layer2 No1", path, pVar->path_length)) {
char* tmp = &pLib->lines[0].pInterface->Layer2[0];
- dword l2_state;
- diva_strace_read_uint (pVar, &l2_state);
+ dword l2_state;
+ if (diva_strace_read_uint(pVar, &l2_state))
+ return -1;
switch (l2_state) {
case 0:
diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index 27d5dd6..ae89fb8 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c
@@ -2692,7 +2692,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
if (!(fax_control_bits & T30_CONTROL_BIT_MORE_DOCUMENTS)
|| (fax_feature_bits & T30_FEATURE_BIT_MORE_DOCUMENTS))
{
- len = (byte)(&(((T30_INFO *) 0)->universal_6));
+ len = offsetof(T30_INFO, universal_6);
fax_info_change = false;
if (ncpi->length >= 4)
{
@@ -2754,7 +2754,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
for (i = 0; i < w; i++)
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id[i] = fax_parms[4].info[1+i];
((T30_INFO *)(plci->fax_connect_info_buffer))->head_line_len = 0;
- len = (byte)(((T30_INFO *) 0)->station_id + 20);
+ len = offsetof(T30_INFO, station_id) + 20;
w = fax_parms[5].length;
if (w > 20)
w = 20;
@@ -2788,7 +2788,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
}
else
{
- len = (byte)(&(((T30_INFO *) 0)->universal_6));
+ len = offsetof(T30_INFO, universal_6);
}
fax_info_change = true;
@@ -2892,7 +2892,7 @@ static byte connect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
&& (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_ENABLE_NSF)
&& (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_NEGOTIATE_RESP))
{
- len = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ len = offsetof(T30_INFO, station_id) + 20;
if (plci->fax_connect_info_length < len)
{
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0;
@@ -3802,7 +3802,7 @@ static byte manufacturer_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
break;
}
ncpi = &m_parms[1];
- len = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ len = offsetof(T30_INFO, station_id) + 20;
if (plci->fax_connect_info_length < len)
{
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0;
@@ -6844,7 +6844,7 @@ static void nl_ind(PLCI *plci)
if ((plci->requested_options_conn | plci->requested_options | a->requested_options_table[plci->appl->Id-1])
& ((1L << PRIVATE_FAX_SUB_SEP_PWD) | (1L << PRIVATE_FAX_NONSTANDARD)))
{
- i = ((word)(((T30_INFO *) 0)->station_id + 20)) + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len;
+ i = offsetof(T30_INFO, station_id) + 20 + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len;
while (i < plci->NL.RBuffer->length)
plci->ncpi_buffer[++len] = plci->NL.RBuffer->P[i++];
}
@@ -7236,7 +7236,7 @@ static void nl_ind(PLCI *plci)
{
plci->RData[1].P = plci->RData[0].P;
plci->RData[1].PLength = plci->RData[0].PLength;
- plci->RData[0].P = v120_header_buffer + (-((int) v120_header_buffer) & 3);
+ plci->RData[0].P = v120_header_buffer + (-((unsigned long)v120_header_buffer) & 3);
if ((plci->NL.RBuffer->P[0] & V120_HEADER_EXTEND_BIT) || (plci->NL.RLength == 1))
plci->RData[0].PLength = 1;
else
@@ -8473,7 +8473,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp)
fax_control_bits |= T30_CONTROL_BIT_ACCEPT_SEL_POLLING;
}
len = nlc[0];
- pos = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ pos = offsetof(T30_INFO, station_id) + 20;
if (pos < plci->fax_connect_info_length)
{
for (i = 1 + plci->fax_connect_info_buffer[pos]; i != 0; i--)
@@ -8525,7 +8525,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp)
}
PUT_WORD(&(((T30_INFO *)&nlc[1])->control_bits_low), fax_control_bits);
- len = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ len = offsetof(T30_INFO, station_id) + 20;
for (i = 0; i < len; i++)
plci->fax_connect_info_buffer[i] = nlc[1+i];
((T30_INFO *) plci->fax_connect_info_buffer)->head_line_len = 0;
diff --git a/drivers/isdn/hisax/amd7930_fn.c b/drivers/isdn/hisax/amd7930_fn.c
index bf526a7a..d6fdf1f 100644
--- a/drivers/isdn/hisax/amd7930_fn.c
+++ b/drivers/isdn/hisax/amd7930_fn.c
@@ -594,6 +594,7 @@ Amd7930_l1hw(struct PStack *st, int pr, void *arg)
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "Amd7930: l1hw: l2l1 tx_skb exist this shouldn't happen");
skb_queue_tail(&cs->sq, skb);
+ spin_unlock_irqrestore(&cs->lock, flags);
break;
}
if (cs->debug & DEB_DLOG_HEX)
diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c
index 018bd29..0b0c2e5 100644
--- a/drivers/isdn/hisax/diva.c
+++ b/drivers/isdn/hisax/diva.c
@@ -382,7 +382,7 @@ MemwaitforXFW(struct IsdnCardState *cs, int hscx)
{
int to = 50;
- while ((!(MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) {
+ while (((MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) {
udelay(1);
to--;
}
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 9de5420..a420b64 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -817,8 +817,8 @@ collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish)
}
/* we have a complete hdlc packet */
if (finish) {
- if ((!fifo->skbuff->data[fifo->skbuff->len - 1])
- && (fifo->skbuff->len > 3)) {
+ if (fifo->skbuff->len > 3 &&
+ !fifo->skbuff->data[fifo->skbuff->len - 1]) {
if (fifon == HFCUSB_D_RX) {
DBG(HFCUSB_DBG_DCHANNEL,
diff --git a/drivers/isdn/hisax/hscx_irq.c b/drivers/isdn/hisax/hscx_irq.c
index 7b1ad5e..2387d76 100644
--- a/drivers/isdn/hisax/hscx_irq.c
+++ b/drivers/isdn/hisax/hscx_irq.c
@@ -32,7 +32,7 @@ waitforXFW(struct IsdnCardState *cs, int hscx)
{
int to = 50;
- while ((!(READHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) {
+ while (((READHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) {
udelay(1);
to--;
}
diff --git a/drivers/isdn/hisax/icc.c b/drivers/isdn/hisax/icc.c
index 9aba646..c80cbb8 100644
--- a/drivers/isdn/hisax/icc.c
+++ b/drivers/isdn/hisax/icc.c
@@ -468,6 +468,7 @@ ICC_l1hw(struct PStack *st, int pr, void *arg)
if (cs->debug & L1_DEB_WARN)
debugl1(cs, " l2l1 tx_skb exist this shouldn't happen");
skb_queue_tail(&cs->sq, skb);
+ spin_unlock_irqrestore(&cs->lock, flags);
break;
}
if (cs->debug & DEB_DLOG_HEX)
diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
index 3e1532a..0d05ec4 100644
--- a/drivers/isdn/mISDN/stack.c
+++ b/drivers/isdn/mISDN/stack.c
@@ -364,7 +364,7 @@ add_layer2(struct mISDNchannel *ch, struct mISDNstack *st)
static int
st_own_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
{
- if (!ch->st || ch->st->layer1)
+ if (!ch->st || !ch->st->layer1)
return -EINVAL;
return ch->st->layer1->ctrl(ch->st->layer1, cmd, arg);
}
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 76410c1..69dc017 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -68,7 +68,7 @@ enum {
#define CQE_STATUS_COMPL_MASK 0xFFFF
#define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */
#define CQE_STATUS_EXTD_MASK 0xFFFF
-#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */
+#define CQE_STATUS_EXTD_SHIFT 16 /* bits 16 - 31 */
struct be_mcc_compl {
u32 status; /* dword 0 */
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index f1b09c0..79ce8e8 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -2217,7 +2217,7 @@ void emac_poll_controller(struct net_device *ndev)
struct emac_priv *priv = netdev_priv(ndev);
emac_int_disable(priv);
- emac_irq(ndev->irq, priv);
+ emac_irq(ndev->irq, ndev);
emac_int_enable(priv);
}
#endif
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index f428c5f..7462fdf 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1438,19 +1438,31 @@ static int e100_phy_init(struct nic *nic)
} else
DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
- /* Isolate all the PHY ids */
- for (addr = 0; addr < 32; addr++)
- mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
- /* Select the discovered PHY */
- bmcr &= ~BMCR_ISOLATE;
- mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
-
/* Get phy ID */
id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
nic->phy = (u32)id_hi << 16 | (u32)id_lo;
DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
+ /* Select the phy and isolate the rest */
+ for (addr = 0; addr < 32; addr++) {
+ if (addr != nic->mii.phy_id) {
+ mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
+ } else if (nic->phy != phy_82552_v) {
+ bmcr = mdio_read(netdev, addr, MII_BMCR);
+ mdio_write(netdev, addr, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+ }
+ }
+ /*
+ * Workaround for 82552:
+ * Clear the ISOLATE bit on selected phy_id last (mirrored on all
+ * other phy_id's) using bmcr value from addr discovery loop above.
+ */
+ if (nic->phy == phy_82552_v)
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+
/* Handle National tx phys */
#define NCS_PHY_MODEL_MASK 0xFFF0FFFF
if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index c0f185b..1190167 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -76,6 +76,7 @@
/* Extended Device Control */
#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
@@ -347,6 +348,7 @@
/* Extended Configuration Control and Size */
#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008
#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000
#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 08a4f9d..00989c5 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -141,6 +141,20 @@ struct e1000_info;
#define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */
#define HV_TNCRS_LOWER PHY_REG(778, 30)
+/* BM PHY Copper Specific Status */
+#define BM_CS_STATUS 17
+#define BM_CS_STATUS_LINK_UP 0x0400
+#define BM_CS_STATUS_RESOLVED 0x0800
+#define BM_CS_STATUS_SPEED_MASK 0xC000
+#define BM_CS_STATUS_SPEED_1000 0x8000
+
+/* 82577 Mobile Phy Status Register */
+#define HV_M_STATUS 26
+#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000
+#define HV_M_STATUS_SPEED_MASK 0x0300
+#define HV_M_STATUS_SPEED_1000 0x0200
+#define HV_M_STATUS_LINK_UP 0x0040
+
enum e1000_boards {
board_82571,
board_82572,
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 7b05cf4..aaea41e 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -903,6 +903,7 @@ struct e1000_shadow_ram {
struct e1000_dev_spec_ich8lan {
bool kmrn_lock_loss_workaround_enabled;
struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
+ bool nvm_k1_enabled;
};
struct e1000_hw {
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index b6388b9..51ddb04 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -124,11 +124,25 @@
#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR PHY_REG(768, 26)
+#define HV_SMB_ADDR_PEC_EN 0x0200
+#define HV_SMB_ADDR_VALID 0x0080
+
+/* Strapping Option Register - RO */
+#define E1000_STRAP 0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
+
/* OEM Bits Phy Register */
#define HV_OEM_BITS PHY_REG(768, 25)
#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */
#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
+#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
+
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
@@ -208,6 +222,9 @@ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@@ -483,14 +500,6 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
goto out;
}
- if (hw->mac.type == e1000_pchlan) {
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- E1000_KMRNCTRLSTA_K1_ENABLE);
- if (ret_val)
- goto out;
- }
-
/*
* First we want to see if the MII Status Register reports
* link. If so, then we want to get the current speed/duplex
@@ -500,6 +509,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
if (ret_val)
goto out;
+ if (hw->mac.type == e1000_pchlan) {
+ ret_val = e1000_k1_gig_workaround_hv(hw, link);
+ if (ret_val)
+ goto out;
+ }
+
if (!link)
goto out; /* No link detected */
@@ -794,6 +809,326 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
}
/**
+ * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
+ * @hw: pointer to the HW structure
+ *
+ * SW should configure the LCD from the NVM extended configuration region
+ * as a workaround for certain parts.
+ **/
+static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
+ s32 ret_val;
+ u16 word_addr, reg_data, reg_addr, phy_page = 0;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Initialize the PHY from the NVM on ICH platforms. This
+ * is needed due to an issue where the NVM configuration is
+ * not properly autoloaded after power transitions.
+ * Therefore, after each PHY reset, we will load the
+ * configuration data out of the NVM manually.
+ */
+ if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) ||
+ (hw->mac.type == e1000_pchlan)) {
+ struct e1000_adapter *adapter = hw->adapter;
+
+ /* Check if SW needs to configure the PHY */
+ if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
+ (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) ||
+ (hw->mac.type == e1000_pchlan))
+ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
+ else
+ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+
+ data = er32(FEXTNVM);
+ if (!(data & sw_cfg_mask))
+ goto out;
+
+ /* Wait for basic configuration completes before proceeding */
+ e1000_lan_init_done_ich8lan(hw);
+
+ /*
+ * Make sure HW does not configure LCD from PHY
+ * extended configuration before SW configuration
+ */
+ data = er32(EXTCNF_CTRL);
+ if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
+ goto out;
+
+ cnf_size = er32(EXTCNF_SIZE);
+ cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
+ cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
+ if (!cnf_size)
+ goto out;
+
+ cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
+ cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
+
+ if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
+ (hw->mac.type == e1000_pchlan)) {
+ /*
+ * HW configures the SMBus address and LEDs when the
+ * OEM and LCD Write Enable bits are set in the NVM.
+ * When both NVM bits are cleared, SW will configure
+ * them instead.
+ */
+ data = er32(STRAP);
+ data &= E1000_STRAP_SMBUS_ADDRESS_MASK;
+ reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT;
+ reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
+ ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR,
+ reg_data);
+ if (ret_val)
+ goto out;
+
+ data = er32(LEDCTL);
+ ret_val = e1000_write_phy_reg_hv_locked(hw,
+ HV_LED_CONFIG,
+ (u16)data);
+ if (ret_val)
+ goto out;
+ }
+ /* Configure LCD from extended configuration region. */
+
+ /* cnf_base_addr is in DWORD */
+ word_addr = (u16)(cnf_base_addr << 1);
+
+ for (i = 0; i < cnf_size; i++) {
+ ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
+ &reg_data);
+ if (ret_val)
+ goto out;
+
+ ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
+ 1, &reg_addr);
+ if (ret_val)
+ goto out;
+
+ /* Save off the PHY page for future writes. */
+ if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
+ phy_page = reg_data;
+ continue;
+ }
+
+ reg_addr &= PHY_REG_MASK;
+ reg_addr |= phy_page;
+
+ ret_val = phy->ops.write_phy_reg_locked(hw,
+ (u32)reg_addr,
+ reg_data);
+ if (ret_val)
+ goto out;
+ }
+ }
+
+out:
+ hw->phy.ops.release_phy(hw);
+ return ret_val;
+}
+
+/**
+ * e1000_k1_gig_workaround_hv - K1 Si workaround
+ * @hw: pointer to the HW structure
+ * @link: link up bool flag
+ *
+ * If K1 is enabled for 1Gbps, the MAC might stall when transitioning
+ * from a lower speed. This workaround disables K1 whenever link is at 1Gig
+ * If link is down, the function will restore the default K1 setting located
+ * in the NVM.
+ **/
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
+{
+ s32 ret_val = 0;
+ u16 status_reg = 0;
+ bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;
+
+ if (hw->mac.type != e1000_pchlan)
+ goto out;
+
+ /* Wrap the whole flow with the sw flag */
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+
+ /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
+ if (link) {
+ if (hw->phy.type == e1000_phy_82578) {
+ ret_val = hw->phy.ops.read_phy_reg_locked(hw,
+ BM_CS_STATUS,
+ &status_reg);
+ if (ret_val)
+ goto release;
+
+ status_reg &= BM_CS_STATUS_LINK_UP |
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
+
+ if (status_reg == (BM_CS_STATUS_LINK_UP |
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
+ k1_enable = false;
+ }
+
+ if (hw->phy.type == e1000_phy_82577) {
+ ret_val = hw->phy.ops.read_phy_reg_locked(hw,
+ HV_M_STATUS,
+ &status_reg);
+ if (ret_val)
+ goto release;
+
+ status_reg &= HV_M_STATUS_LINK_UP |
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_MASK;
+
+ if (status_reg == (HV_M_STATUS_LINK_UP |
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_1000))
+ k1_enable = false;
+ }
+
+ /* Link stall fix for link up */
+ ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+ 0x0100);
+ if (ret_val)
+ goto release;
+
+ } else {
+ /* Link stall fix for link down */
+ ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+ 0x4100);
+ if (ret_val)
+ goto release;
+ }
+
+ ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);
+
+release:
+ hw->phy.ops.release_phy(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_configure_k1_ich8lan - Configure K1 power state
+ * @hw: pointer to the HW structure
+ * @enable: K1 state to configure
+ *
+ * Configure the K1 power state based on the provided parameter.
+ * Assumes semaphore already acquired.
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ **/
+static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
+{
+ s32 ret_val = 0;
+ u32 ctrl_reg = 0;
+ u32 ctrl_ext = 0;
+ u32 reg = 0;
+ u16 kmrn_reg = 0;
+
+ ret_val = e1000e_read_kmrn_reg_locked(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ &kmrn_reg);
+ if (ret_val)
+ goto out;
+
+ if (k1_enable)
+ kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
+ else
+ kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
+
+ ret_val = e1000e_write_kmrn_reg_locked(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg);
+ if (ret_val)
+ goto out;
+
+ udelay(20);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_reg = er32(CTRL);
+
+ reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ reg |= E1000_CTRL_FRCSPD;
+ ew32(CTRL, reg);
+
+ ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
+ udelay(20);
+ ew32(CTRL, ctrl_reg);
+ ew32(CTRL_EXT, ctrl_ext);
+ udelay(20);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration
+ * @hw: pointer to the HW structure
+ * @d0_state: boolean if entering d0 or d3 device state
+ *
+ * SW will configure Gbe Disable and LPLU based on the NVM. The four bits are
+ * collectively called OEM bits. The OEM Write Enable bit and SW Config bit
+ * in NVM determines whether HW should configure LPLU and Gbe Disable.
+ **/
+static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
+{
+ s32 ret_val = 0;
+ u32 mac_reg;
+ u16 oem_reg;
+
+ if (hw->mac.type != e1000_pchlan)
+ return ret_val;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
+ mac_reg = er32(EXTCNF_CTRL);
+ if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
+ goto out;
+
+ mac_reg = er32(FEXTNVM);
+ if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
+ goto out;
+
+ mac_reg = er32(PHY_CTRL);
+
+ ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg);
+ if (ret_val)
+ goto out;
+
+ oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU);
+
+ if (d0_state) {
+ if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE)
+ oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+ if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
+ oem_reg |= HV_OEM_BITS_LPLU;
+ } else {
+ if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE)
+ oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+ if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU)
+ oem_reg |= HV_OEM_BITS_LPLU;
+ }
+ /* Restart auto-neg to activate the bits */
+ oem_reg |= HV_OEM_BITS_RESTART_AN;
+ ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg);
+
+out:
+ hw->phy.ops.release_phy(hw);
+
+ return ret_val;
+}
+
+
+/**
* e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
* done after every PHY reset.
**/
@@ -833,10 +1168,20 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
ret_val = hw->phy.ops.acquire_phy(hw);
if (ret_val)
return ret_val;
+
hw->phy.addr = 1;
- e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+ ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+ if (ret_val)
+ goto out;
hw->phy.ops.release_phy(hw);
+ /*
+ * Configure the K1 Si workaround during phy reset assuming there is
+ * link so that it disables K1 if link is in 1Gbps.
+ */
+ ret_val = e1000_k1_gig_workaround_hv(hw, true);
+
+out:
return ret_val;
}
@@ -882,11 +1227,8 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
**/
static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
{
- struct e1000_phy_info *phy = &hw->phy;
- u32 i;
- u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
- s32 ret_val;
- u16 reg, word_addr, reg_data, reg_addr, phy_page = 0;
+ s32 ret_val = 0;
+ u16 reg;
ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
@@ -905,81 +1247,16 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
if (hw->mac.type == e1000_pchlan)
e1e_rphy(hw, BM_WUC, &reg);
- /*
- * Initialize the PHY from the NVM on ICH platforms. This
- * is needed due to an issue where the NVM configuration is
- * not properly autoloaded after power transitions.
- * Therefore, after each PHY reset, we will load the
- * configuration data out of the NVM manually.
- */
- if (hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) {
- struct e1000_adapter *adapter = hw->adapter;
-
- /* Check if SW needs configure the PHY */
- if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
- (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M))
- sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
- else
- sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
-
- data = er32(FEXTNVM);
- if (!(data & sw_cfg_mask))
- return 0;
-
- /* Wait for basic configuration completes before proceeding */
- e1000_lan_init_done_ich8lan(hw);
-
- /*
- * Make sure HW does not configure LCD from PHY
- * extended configuration before SW configuration
- */
- data = er32(EXTCNF_CTRL);
- if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
- return 0;
-
- cnf_size = er32(EXTCNF_SIZE);
- cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
- cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
- if (!cnf_size)
- return 0;
-
- cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
- cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
-
- /* Configure LCD from extended configuration region. */
-
- /* cnf_base_addr is in DWORD */
- word_addr = (u16)(cnf_base_addr << 1);
-
- for (i = 0; i < cnf_size; i++) {
- ret_val = e1000_read_nvm(hw,
- (word_addr + i * 2),
- 1,
- &reg_data);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_nvm(hw,
- (word_addr + i * 2 + 1),
- 1,
- &reg_addr);
- if (ret_val)
- return ret_val;
-
- /* Save off the PHY page for future writes. */
- if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
- phy_page = reg_data;
- continue;
- }
-
- reg_addr |= phy_page;
+ /* Configure the LCD with the extended configuration region in NVM */
+ ret_val = e1000_sw_lcd_config_ich8lan(hw);
+ if (ret_val)
+ goto out;
- ret_val = e1e_wphy(hw, (u32)reg_addr, reg_data);
- if (ret_val)
- return ret_val;
- }
- }
+ /* Configure the LCD with the OEM bits in NVM */
+ if (hw->mac.type == e1000_pchlan)
+ ret_val = e1000_oem_bits_config_ich8lan(hw, true);
+out:
return 0;
}
@@ -2306,6 +2583,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
**/
static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
{
+ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
u16 reg;
u32 ctrl, icr, kab;
s32 ret_val;
@@ -2341,6 +2619,18 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
ew32(PBS, E1000_PBS_16K);
}
+ if (hw->mac.type == e1000_pchlan) {
+ /* Save the NVM K1 bit setting*/
+ ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, &reg);
+ if (ret_val)
+ return ret_val;
+
+ if (reg & E1000_NVM_K1_ENABLE)
+ dev_spec->nvm_k1_enabled = true;
+ else
+ dev_spec->nvm_k1_enabled = false;
+ }
+
ctrl = er32(CTRL);
if (!e1000_check_reset_block(hw)) {
@@ -2386,6 +2676,15 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
if (hw->mac.type == e1000_pchlan)
e1e_rphy(hw, BM_WUC, &reg);
+ ret_val = e1000_sw_lcd_config_ich8lan(hw);
+ if (ret_val)
+ goto out;
+
+ if (hw->mac.type == e1000_pchlan) {
+ ret_val = e1000_oem_bits_config_ich8lan(hw, true);
+ if (ret_val)
+ goto out;
+ }
/*
* For PCH, this write will make sure that any noise
* will be detected as a CRC error and be dropped rather than show up
@@ -2404,6 +2703,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
if (hw->mac.type == e1000_pchlan)
ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+out:
return ret_val;
}
@@ -2708,14 +3008,6 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
if (ret_val)
return ret_val;
- if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- E1000_KMRNCTRLSTA_K1_DISABLE);
- if (ret_val)
- return ret_val;
- }
-
if ((hw->mac.type == e1000_ich8lan) &&
(hw->phy.type == e1000_phy_igp_3) &&
(*speed == SPEED_1000)) {
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index f9d33ab..03175b3 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -95,13 +95,6 @@ static const u16 e1000_igp_2_cable_length_table[] =
/* BM PHY Copper Specific Control 1 */
#define BM_CS_CTRL1 16
-/* BM PHY Copper Specific Status */
-#define BM_CS_STATUS 17
-#define BM_CS_STATUS_LINK_UP 0x0400
-#define BM_CS_STATUS_RESOLVED 0x0800
-#define BM_CS_STATUS_SPEED_MASK 0xC000
-#define BM_CS_STATUS_SPEED_1000 0x8000
-
#define HV_MUX_DATA_CTRL PHY_REG(776, 16)
#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400
#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004
@@ -563,7 +556,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
}
/**
- * e1000_read_kmrn_reg_locked - Read kumeran register
+ * e1000e_read_kmrn_reg_locked - Read kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
@@ -572,7 +565,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
* information retrieved is stored in data.
* Assumes semaphore already acquired.
**/
-s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
{
return __e1000_read_kmrn_reg(hw, offset, data, true);
}
@@ -631,7 +624,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
}
/**
- * e1000_write_kmrn_reg_locked - Write kumeran register
+ * e1000e_write_kmrn_reg_locked - Write kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
@@ -639,7 +632,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
* Write the data to PHY register at the offset using the kumeran interface.
* Assumes semaphore already acquired.
**/
-s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
+s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
{
return __e1000_write_kmrn_reg(hw, offset, data, true);
}
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index bd3447f..94c9ad2 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1760,7 +1760,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"),
PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b),
PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 1f7946c..1b0aa4c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -3379,7 +3379,7 @@ static u16 rtl_rw_cpluscmd(void __iomem *ioaddr)
static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
{
/* Low hurts. Let's disable the filtering. */
- RTL_W16(RxMaxSize, rx_buf_sz);
+ RTL_W16(RxMaxSize, rx_buf_sz + 1);
}
static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 1729ebf..a3d9991 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -4651,6 +4651,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
goto err_out_free_netdev;
}
+ netif_carrier_off(dev);
+
netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
err = request_irq(pdev->irq, sky2_intr,
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 525bbc5..6a3c751 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -1143,9 +1143,16 @@ static void dir_open_adapter (struct net_device *dev)
} else {
char **prphase = printphase;
char **prerror = printerror;
+ int pnr = err / 16 - 1;
+ int enr = err % 16 - 1;
DPRINTK("TR Adapter misc open failure, error code = ");
- printk("0x%x, Phase: %s, Error: %s\n",
- err, prphase[err/16 -1], prerror[err%16 -1]);
+ if (pnr < 0 || pnr >= ARRAY_SIZE(printphase) ||
+ enr < 0 ||
+ enr >= ARRAY_SIZE(printerror))
+ printk("0x%x, invalid Phase/Error.", err);
+ else
+ printk("0x%x, Phase: %s, Error: %s\n", err,
+ prphase[pnr], prerror[enr]);
printk(" retrying after %ds delay...\n",
TR_RETRY_INTERVAL/HZ);
}
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index c47237c..32d9356 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -174,7 +174,7 @@ config USB_NET_CDCETHER
* Ericsson Mobile Broadband Module (all variants)
* Motorola (DM100 and SB4100)
* Broadcom Cable Modem (reference design)
- * Toshiba (PCX1100U and F3507g)
+ * Toshiba (PCX1100U and F3507g/F3607gw)
* ...
This driver creates an interface named "ethX", where X depends on
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 71e65fc..71d7ff3 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -552,20 +552,60 @@ static const struct usb_device_id products [] = {
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &mbm_info,
}, {
- /* Ericsson F3307 */
+ /* Ericsson F3607gw ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &mbm_info,
+}, {
+ /* Ericsson F3607gw ver 3 */
USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &mbm_info,
}, {
+ /* Ericsson F3307 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &mbm_info,
+}, {
+ /* Ericsson F3307 ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &mbm_info,
+}, {
+ /* Ericsson C3607w */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &mbm_info,
+}, {
/* Toshiba F3507g */
USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &mbm_info,
}, {
+ /* Toshiba F3607gw */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &mbm_info,
+}, {
+ /* Toshiba F3607gw ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &mbm_info,
+}, {
/* Dell F3507g */
USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &mbm_info,
+}, {
+ /* Dell F3607gw */
+ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &mbm_info,
+}, {
+ /* Dell F3607gw ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &mbm_info,
},
{ }, // END
};
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 9527467..22a8ca5 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -996,7 +996,7 @@ static unsigned int features[] = {
VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
};
-static struct virtio_driver virtio_net = {
+static struct virtio_driver virtio_net_driver = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
@@ -1009,12 +1009,12 @@ static struct virtio_driver virtio_net = {
static int __init init(void)
{
- return register_virtio_driver(&virtio_net);
+ return register_virtio_driver(&virtio_net_driver);
}
static void __exit fini(void)
{
- unregister_virtio_driver(&virtio_net);
+ unregister_virtio_driver(&virtio_net_driver);
}
module_init(init);
module_exit(fini);
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 0639364..bb72b46 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -679,7 +679,7 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc,
return rate;
if (rate_table->info[rate].valid_single_stream &&
- !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG));
+ !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG))
return rate;
/* This should not happen */
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 8701034..de4e804 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1157,8 +1157,9 @@ struct b43_dmaring *parse_cookie(struct b43_wldev *dev, u16 cookie, int *slot)
}
static int dma_tx_fragment(struct b43_dmaring *ring,
- struct sk_buff *skb)
+ struct sk_buff **in_skb)
{
+ struct sk_buff *skb = *in_skb;
const struct b43_dma_ops *ops = ring->ops;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
u8 *header;
@@ -1224,8 +1225,14 @@ static int dma_tx_fragment(struct b43_dmaring *ring,
}
memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len);
+ memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb));
+ bounce_skb->dev = skb->dev;
+ skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb));
+ info = IEEE80211_SKB_CB(bounce_skb);
+
dev_kfree_skb_any(skb);
skb = bounce_skb;
+ *in_skb = bounce_skb;
meta->skb = skb;
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
@@ -1355,7 +1362,11 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
* static, so we don't need to store it per frame. */
ring->queue_prio = skb_get_queue_mapping(skb);
- err = dma_tx_fragment(ring, skb);
+ /* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing
+ * into the skb data or cb now. */
+ hdr = NULL;
+ info = NULL;
+ err = dma_tx_fragment(ring, &skb);
if (unlikely(err == -ENOKEY)) {
/* Drop this packet, as we don't have the encryption key
* anymore and must not transmit it unencrypted. */
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 240cff1..a741d37 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -6325,8 +6325,10 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
fail:
if (dev) {
- if (registered)
+ if (registered) {
+ unregister_ieee80211(priv->ieee);
unregister_netdev(dev);
+ }
ipw2100_hw_stop_adapter(priv);
@@ -6383,6 +6385,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
/* Unregister the device first - this results in close()
* being called if the device is open. If we free storage
* first, then close() will crash. */
+ unregister_ieee80211(priv->ieee);
unregister_netdev(dev);
/* ipw2100_down will ensure that there is no more pending work
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 61ef890..4539e63 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -11822,6 +11822,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
if (err) {
IPW_ERROR("Failed to register promiscuous network "
"device (error %d).\n", err);
+ unregister_ieee80211(priv->ieee);
unregister_netdev(priv->net_dev);
goto out_remove_sysfs;
}
@@ -11872,6 +11873,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev)
mutex_unlock(&priv->mutex);
+ unregister_ieee80211(priv->ieee);
unregister_netdev(priv->net_dev);
if (priv->rxq) {
diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h
index bf45391..f42ade6 100644
--- a/drivers/net/wireless/ipw2x00/libipw.h
+++ b/drivers/net/wireless/ipw2x00/libipw.h
@@ -1020,6 +1020,7 @@ static inline int libipw_is_cck_rate(u8 rate)
/* ieee80211.c */
extern void free_ieee80211(struct net_device *dev, int monitor);
extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor);
+extern void unregister_ieee80211(struct libipw_device *ieee);
extern int libipw_change_mtu(struct net_device *dev, int new_mtu);
extern void libipw_networks_age(struct libipw_device *ieee,
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index a0e9f6a..be5b809 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -235,16 +235,19 @@ void free_ieee80211(struct net_device *dev, int monitor)
libipw_networks_free(ieee);
/* free cfg80211 resources */
- if (!monitor) {
- wiphy_unregister(ieee->wdev.wiphy);
- kfree(ieee->a_band.channels);
- kfree(ieee->bg_band.channels);
+ if (!monitor)
wiphy_free(ieee->wdev.wiphy);
- }
free_netdev(dev);
}
+void unregister_ieee80211(struct libipw_device *ieee)
+{
+ wiphy_unregister(ieee->wdev.wiphy);
+ kfree(ieee->a_band.channels);
+ kfree(ieee->bg_band.channels);
+}
+
#ifdef CONFIG_LIBIPW_DEBUG
static int debug = 0;
@@ -330,3 +333,4 @@ module_init(libipw_init);
EXPORT_SYMBOL(alloc_ieee80211);
EXPORT_SYMBOL(free_ieee80211);
+EXPORT_SYMBOL(unregister_ieee80211);
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index a8262de..f12d667 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -511,7 +511,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
/* Fill the receive configuration URB and initialise the Rx call back */
usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
- (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
+ skb->data + IPFIELD_ALIGN_OFFSET,
MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
cardp);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index b8f5ee3..14e7bb21 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2389,10 +2389,13 @@ static struct usb_device_id rt73usb_device_table[] = {
{ USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) },
/* MSI */
+ { USB_DEVICE(0x0db0, 0x4600), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Ovislink */
+ { USB_DEVICE(0x1b75, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
/* Ralink */
{ USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
@@ -2420,6 +2423,8 @@ static struct usb_device_id rt73usb_device_table[] = {
/* Planex */
{ USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* WideTell */
+ { USB_DEVICE(0x7167, 0x3840), USB_DEVICE_DATA(&rt73usb_ops) },
/* Zcom */
{ USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
/* ZyXEL */
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index ff4617e..7c7914f 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -879,10 +879,10 @@ static struct pcmcia_device_id serial_ids[] = {
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
- PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
- PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
- PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
+ PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
+ PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
OpenPOWER on IntegriCloud