summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/hid/wacom_sys.c2
-rw-r--r--drivers/input/input-mt.c38
-rw-r--r--drivers/input/joystick/analog.c2
-rw-r--r--drivers/input/joystick/xpad.c174
-rw-r--r--drivers/input/keyboard/cap1106.c8
-rw-r--r--drivers/input/mouse/synaptics.c72
-rw-r--r--drivers/input/touchscreen/atmel_mxt_ts.c366
-rw-r--r--drivers/input/touchscreen/edt-ft5x06.c1
8 files changed, 461 insertions, 202 deletions
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 3e388ec..f0db7ec 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -1416,6 +1416,7 @@ static void wacom_remove(struct hid_device *hdev)
kfree(wacom);
}
+#ifdef CONFIG_PM
static int wacom_resume(struct hid_device *hdev)
{
struct wacom *wacom = hid_get_drvdata(hdev);
@@ -1436,6 +1437,7 @@ static int wacom_reset_resume(struct hid_device *hdev)
{
return wacom_resume(hdev);
}
+#endif /* CONFIG_PM */
static struct hid_driver wacom_driver = {
.name = "wacom",
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index d398f13..c30204f 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -237,6 +237,31 @@ void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count)
EXPORT_SYMBOL(input_mt_report_pointer_emulation);
/**
+ * input_mt_drop_unused() - Inactivate slots not seen in this frame
+ * @dev: input device with allocated MT slots
+ *
+ * Lift all slots not seen since the last call to this function.
+ */
+void input_mt_drop_unused(struct input_dev *dev)
+{
+ struct input_mt *mt = dev->mt;
+ int i;
+
+ if (!mt)
+ return;
+
+ for (i = 0; i < mt->num_slots; i++) {
+ if (!input_mt_is_used(mt, &mt->slots[i])) {
+ input_mt_slot(dev, i);
+ input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
+ }
+ }
+
+ mt->frame++;
+}
+EXPORT_SYMBOL(input_mt_drop_unused);
+
+/**
* input_mt_sync_frame() - synchronize mt frame
* @dev: input device with allocated MT slots
*
@@ -247,27 +272,18 @@ EXPORT_SYMBOL(input_mt_report_pointer_emulation);
void input_mt_sync_frame(struct input_dev *dev)
{
struct input_mt *mt = dev->mt;
- struct input_mt_slot *s;
bool use_count = false;
if (!mt)
return;
- if (mt->flags & INPUT_MT_DROP_UNUSED) {
- for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
- if (input_mt_is_used(mt, s))
- continue;
- input_mt_slot(dev, s - mt->slots);
- input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
- }
- }
+ if (mt->flags & INPUT_MT_DROP_UNUSED)
+ input_mt_drop_unused(dev);
if ((mt->flags & INPUT_MT_POINTER) && !(mt->flags & INPUT_MT_SEMI_MT))
use_count = true;
input_mt_report_pointer_emulation(dev, use_count);
-
- mt->frame++;
}
EXPORT_SYMBOL(input_mt_sync_frame);
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index 9135606..ab0fdcd 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -158,7 +158,7 @@ static unsigned int get_time_pit(void)
#define GET_TIME(x) rdtscl(x)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "TSC"
-#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_TILE)
+#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_TILE)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "get_cycles"
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 603fe0d..177602c 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -95,7 +95,8 @@
#define XTYPE_XBOX 0
#define XTYPE_XBOX360 1
#define XTYPE_XBOX360W 2
-#define XTYPE_UNKNOWN 3
+#define XTYPE_XBOXONE 3
+#define XTYPE_UNKNOWN 4
static bool dpad_to_buttons;
module_param(dpad_to_buttons, bool, S_IRUGO);
@@ -121,6 +122,7 @@ static const struct xpad_device {
{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+ { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
@@ -231,10 +233,12 @@ static const signed short xpad_abs_triggers[] = {
-1
};
-/* Xbox 360 has a vendor-specific class, so we cannot match it with only
+/*
+ * Xbox 360 has a vendor-specific class, so we cannot match it with only
* USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
* match against vendor id as well. Wired Xbox 360 devices have protocol 1,
- * wireless controllers have protocol 129. */
+ * wireless controllers have protocol 129.
+ */
#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
.idVendor = (vend), \
@@ -245,9 +249,20 @@ static const signed short xpad_abs_triggers[] = {
{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
+/* The Xbox One controller uses subclass 71 and protocol 208. */
+#define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
+ .idVendor = (vend), \
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
+ .bInterfaceSubClass = 71, \
+ .bInterfaceProtocol = (pr)
+#define XPAD_XBOXONE_VENDOR(vend) \
+ { XPAD_XBOXONE_VENDOR_PROTOCOL(vend, 208) }
+
static struct usb_device_id xpad_table[] = {
{ USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */
XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */
+ XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft X-Box One controllers */
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
{ USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
@@ -278,12 +293,10 @@ struct usb_xpad {
struct urb *bulk_out;
unsigned char *bdata;
-#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
struct urb *irq_out; /* urb for interrupt out report */
unsigned char *odata; /* output data */
dma_addr_t odata_dma;
struct mutex odata_mutex;
-#endif
#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
struct xpad_led *led;
@@ -470,6 +483,105 @@ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned cha
xpad360_process_packet(xpad, cmd, &data[4]);
}
+/*
+ * xpadone_process_buttons
+ *
+ * Process a button update packet from an Xbox one controller.
+ */
+static void xpadone_process_buttons(struct usb_xpad *xpad,
+ struct input_dev *dev,
+ unsigned char *data)
+{
+ /* menu/view buttons */
+ input_report_key(dev, BTN_START, data[4] & 0x04);
+ input_report_key(dev, BTN_SELECT, data[4] & 0x08);
+
+ /* buttons A,B,X,Y */
+ input_report_key(dev, BTN_A, data[4] & 0x10);
+ input_report_key(dev, BTN_B, data[4] & 0x20);
+ input_report_key(dev, BTN_X, data[4] & 0x40);
+ input_report_key(dev, BTN_Y, data[4] & 0x80);
+
+ /* digital pad */
+ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
+ /* dpad as buttons (left, right, up, down) */
+ input_report_key(dev, BTN_TRIGGER_HAPPY1, data[5] & 0x04);
+ input_report_key(dev, BTN_TRIGGER_HAPPY2, data[5] & 0x08);
+ input_report_key(dev, BTN_TRIGGER_HAPPY3, data[5] & 0x01);
+ input_report_key(dev, BTN_TRIGGER_HAPPY4, data[5] & 0x02);
+ } else {
+ input_report_abs(dev, ABS_HAT0X,
+ !!(data[5] & 0x08) - !!(data[5] & 0x04));
+ input_report_abs(dev, ABS_HAT0Y,
+ !!(data[5] & 0x02) - !!(data[5] & 0x01));
+ }
+
+ /* TL/TR */
+ input_report_key(dev, BTN_TL, data[5] & 0x10);
+ input_report_key(dev, BTN_TR, data[5] & 0x20);
+
+ /* stick press left/right */
+ input_report_key(dev, BTN_THUMBL, data[5] & 0x40);
+ input_report_key(dev, BTN_THUMBR, data[5] & 0x80);
+
+ if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+ /* left stick */
+ input_report_abs(dev, ABS_X,
+ (__s16) le16_to_cpup((__le16 *)(data + 10)));
+ input_report_abs(dev, ABS_Y,
+ ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
+
+ /* right stick */
+ input_report_abs(dev, ABS_RX,
+ (__s16) le16_to_cpup((__le16 *)(data + 14)));
+ input_report_abs(dev, ABS_RY,
+ ~(__s16) le16_to_cpup((__le16 *)(data + 16)));
+ }
+
+ /* triggers left/right */
+ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+ input_report_key(dev, BTN_TL2,
+ (__u16) le16_to_cpup((__le16 *)(data + 6)));
+ input_report_key(dev, BTN_TR2,
+ (__u16) le16_to_cpup((__le16 *)(data + 8)));
+ } else {
+ input_report_abs(dev, ABS_Z,
+ (__u16) le16_to_cpup((__le16 *)(data + 6)));
+ input_report_abs(dev, ABS_RZ,
+ (__u16) le16_to_cpup((__le16 *)(data + 8)));
+ }
+
+ input_sync(dev);
+}
+
+/*
+ * xpadone_process_packet
+ *
+ * Completes a request by converting the data into events for the
+ * input subsystem. This version is for the Xbox One controller.
+ *
+ * The report format was gleaned from
+ * https://github.com/kylelemons/xbox/blob/master/xbox.go
+ */
+
+static void xpadone_process_packet(struct usb_xpad *xpad,
+ u16 cmd, unsigned char *data)
+{
+ struct input_dev *dev = xpad->dev;
+
+ switch (data[0]) {
+ case 0x20:
+ xpadone_process_buttons(xpad, dev, data);
+ break;
+
+ case 0x07:
+ /* the xbox button has its own special report */
+ input_report_key(dev, BTN_MODE, data[4] & 0x01);
+ input_sync(dev);
+ break;
+ }
+}
+
static void xpad_irq_in(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
@@ -502,6 +614,9 @@ static void xpad_irq_in(struct urb *urb)
case XTYPE_XBOX360W:
xpad360w_process_packet(xpad, 0, xpad->idata);
break;
+ case XTYPE_XBOXONE:
+ xpadone_process_packet(xpad, 0, xpad->idata);
+ break;
default:
xpad_process_packet(xpad, 0, xpad->idata);
}
@@ -535,7 +650,6 @@ static void xpad_bulk_out(struct urb *urb)
}
}
-#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
static void xpad_irq_out(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
@@ -573,6 +687,7 @@ exit:
static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
{
struct usb_endpoint_descriptor *ep_irq_out;
+ int ep_irq_out_idx;
int error;
if (xpad->xtype == XTYPE_UNKNOWN)
@@ -593,7 +708,10 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
goto fail2;
}
- ep_irq_out = &intf->cur_altsetting->endpoint[1].desc;
+ /* Xbox One controller has in/out endpoints swapped. */
+ ep_irq_out_idx = xpad->xtype == XTYPE_XBOXONE ? 0 : 1;
+ ep_irq_out = &intf->cur_altsetting->endpoint[ep_irq_out_idx].desc;
+
usb_fill_int_urb(xpad->irq_out, xpad->udev,
usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
xpad->odata, XPAD_PKT_LEN,
@@ -621,11 +739,6 @@ static void xpad_deinit_output(struct usb_xpad *xpad)
xpad->odata, xpad->odata_dma);
}
}
-#else
-static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) { return 0; }
-static void xpad_deinit_output(struct usb_xpad *xpad) {}
-static void xpad_stop_output(struct usb_xpad *xpad) {}
-#endif
#ifdef CONFIG_JOYSTICK_XPAD_FF
static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
@@ -692,7 +805,7 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect
static int xpad_init_ff(struct usb_xpad *xpad)
{
- if (xpad->xtype == XTYPE_UNKNOWN)
+ if (xpad->xtype == XTYPE_UNKNOWN || xpad->xtype == XTYPE_XBOXONE)
return 0;
input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
@@ -801,6 +914,14 @@ static int xpad_open(struct input_dev *dev)
if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
return -EIO;
+ if (xpad->xtype == XTYPE_XBOXONE) {
+ /* Xbox one controller needs to be initialized. */
+ xpad->odata[0] = 0x05;
+ xpad->odata[1] = 0x20;
+ xpad->irq_out->transfer_buffer_length = 2;
+ return usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+ }
+
return 0;
}
@@ -816,6 +937,7 @@ static void xpad_close(struct input_dev *dev)
static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
{
+ struct usb_xpad *xpad = input_get_drvdata(input_dev);
set_bit(abs, input_dev->absbit);
switch (abs) {
@@ -827,7 +949,10 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
break;
case ABS_Z:
case ABS_RZ: /* the triggers (if mapped to axes) */
- input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
+ if (xpad->xtype == XTYPE_XBOXONE)
+ input_set_abs_params(input_dev, abs, 0, 1023, 0, 0);
+ else
+ input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
break;
case ABS_HAT0X:
case ABS_HAT0Y: /* the d-pad (only if dpad is mapped to axes */
@@ -842,6 +967,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
struct usb_xpad *xpad;
struct input_dev *input_dev;
struct usb_endpoint_descriptor *ep_irq_in;
+ int ep_irq_in_idx;
int i, error;
for (i = 0; xpad_device[i].idVendor; i++) {
@@ -850,6 +976,16 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
break;
}
+ if (xpad_device[i].xtype == XTYPE_XBOXONE &&
+ intf->cur_altsetting->desc.bInterfaceNumber != 0) {
+ /*
+ * The Xbox One controller lists three interfaces all with the
+ * same interface class, subclass and protocol. Differentiate by
+ * interface number.
+ */
+ return -ENODEV;
+ }
+
xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
input_dev = input_allocate_device();
if (!xpad || !input_dev) {
@@ -920,7 +1056,8 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
__set_bit(xpad_common_btn[i], input_dev->keybit);
/* set up model-specific ones */
- if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W) {
+ if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
+ xpad->xtype == XTYPE_XBOXONE) {
for (i = 0; xpad360_btn[i] >= 0; i++)
__set_bit(xpad360_btn[i], input_dev->keybit);
} else {
@@ -933,7 +1070,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
__set_bit(xpad_btn_pad[i], input_dev->keybit);
} else {
for (i = 0; xpad_abs_pad[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+ xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
}
if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
@@ -956,7 +1093,10 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
if (error)
goto fail5;
- ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
+ /* Xbox One controller has in/out endpoints swapped. */
+ ep_irq_in_idx = xpad->xtype == XTYPE_XBOXONE ? 1 : 0;
+ ep_irq_in = &intf->cur_altsetting->endpoint[ep_irq_in_idx].desc;
+
usb_fill_int_urb(xpad->irq_in, udev,
usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c
index f7d7a0d..180b184 100644
--- a/drivers/input/keyboard/cap1106.c
+++ b/drivers/input/keyboard/cap1106.c
@@ -64,7 +64,7 @@ struct cap1106_priv {
struct input_dev *idev;
/* config */
- unsigned int keycodes[CAP1106_NUM_CHN];
+ unsigned short keycodes[CAP1106_NUM_CHN];
};
static const struct reg_default cap1106_reg_defaults[] = {
@@ -272,6 +272,12 @@ static int cap1106_i2c_probe(struct i2c_client *i2c_client,
for (i = 0; i < CAP1106_NUM_CHN; i++)
__set_bit(priv->keycodes[i], priv->idev->keybit);
+ __clear_bit(KEY_RESERVED, priv->idev->keybit);
+
+ priv->idev->keycode = priv->keycodes;
+ priv->idev->keycodesize = sizeof(priv->keycodes[0]);
+ priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes);
+
priv->idev->id.vendor = CAP1106_MANUFACTURER_ID;
priv->idev->id.product = CAP1106_PRODUCT_ID;
priv->idev->id.version = rev;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index ef9e0b8..e8573c6 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -117,6 +117,9 @@ void synaptics_reset(struct psmouse *psmouse)
}
#ifdef CONFIG_MOUSE_PS2_SYNAPTICS
+
+static bool cr48_profile_sensor;
+
struct min_max_quirk {
const char * const *pnp_ids;
int x_min, x_max, y_min, y_max;
@@ -1152,6 +1155,42 @@ static void synaptics_image_sensor_process(struct psmouse *psmouse,
priv->agm_pending = false;
}
+static void synaptics_profile_sensor_process(struct psmouse *psmouse,
+ struct synaptics_hw_state *sgm,
+ int num_fingers)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct synaptics_data *priv = psmouse->private;
+ struct synaptics_hw_state *hw[2] = { sgm, &priv->agm };
+ struct input_mt_pos pos[2];
+ int slot[2], nsemi, i;
+
+ nsemi = clamp_val(num_fingers, 0, 2);
+
+ for (i = 0; i < nsemi; i++) {
+ pos[i].x = hw[i]->x;
+ pos[i].y = synaptics_invert_y(hw[i]->y);
+ }
+
+ input_mt_assign_slots(dev, slot, pos, nsemi);
+
+ for (i = 0; i < nsemi; i++) {
+ input_mt_slot(dev, slot[i]);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
+ input_report_abs(dev, ABS_MT_POSITION_X, pos[i].x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, pos[i].y);
+ input_report_abs(dev, ABS_MT_PRESSURE, hw[i]->z);
+ }
+
+ input_mt_drop_unused(dev);
+ input_mt_report_pointer_emulation(dev, false);
+ input_mt_report_finger_count(dev, num_fingers);
+
+ synaptics_report_buttons(psmouse, sgm);
+
+ input_sync(dev);
+}
+
/*
* called for each full received packet from the touchpad
*/
@@ -1215,6 +1254,11 @@ static void synaptics_process_packet(struct psmouse *psmouse)
finger_width = 0;
}
+ if (cr48_profile_sensor) {
+ synaptics_profile_sensor_process(psmouse, &hw, num_fingers);
+ return;
+ }
+
if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
synaptics_report_semi_mt_data(dev, &hw, &priv->agm,
num_fingers);
@@ -1360,6 +1404,9 @@ static void set_input_params(struct psmouse *psmouse,
set_abs_position_params(dev, priv, ABS_X, ABS_Y);
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
+ if (cr48_profile_sensor)
+ input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) {
set_abs_position_params(dev, priv, ABS_MT_POSITION_X,
ABS_MT_POSITION_Y);
@@ -1371,11 +1418,16 @@ static void set_input_params(struct psmouse *psmouse,
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
__set_bit(BTN_TOOL_QUINTTAP, dev->keybit);
} else if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
- /* Non-image sensors with AGM use semi-mt */
- __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
- input_mt_init_slots(dev, 2, 0);
set_abs_position_params(dev, priv, ABS_MT_POSITION_X,
ABS_MT_POSITION_Y);
+ /*
+ * Profile sensor in CR-48 tracks contacts reasonably well,
+ * other non-image sensors with AGM use semi-mt.
+ */
+ input_mt_init_slots(dev, 2,
+ INPUT_MT_POINTER |
+ (cr48_profile_sensor ?
+ INPUT_MT_TRACK : INPUT_MT_SEMI_MT));
}
if (SYN_CAP_PALMDETECT(priv->capabilities))
@@ -1577,10 +1629,24 @@ static const struct dmi_system_id olpc_dmi_table[] __initconst = {
{ }
};
+static const struct dmi_system_id __initconst cr48_dmi_table[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ {
+ /* Cr-48 Chromebook (Codename Mario) */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IEC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Mario"),
+ },
+ },
+#endif
+ { }
+};
+
void __init synaptics_module_init(void)
{
impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
broken_olpc_ec = dmi_check_system(olpc_dmi_table);
+ cr48_profile_sensor = dmi_check_system(cr48_dmi_table);
}
static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 03b8571..db178ed 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -359,7 +359,6 @@ static int mxt_bootloader_read(struct mxt_data *data,
msg.buf = val;
ret = i2c_transfer(data->client->adapter, &msg, 1);
-
if (ret == 1) {
ret = 0;
} else {
@@ -414,6 +413,7 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
case 0x5b:
bootloader = appmode - 0x26;
break;
+
default:
dev_err(&data->client->dev,
"Appmode i2c address 0x%02x not found\n",
@@ -425,20 +425,20 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
return 0;
}
-static int mxt_probe_bootloader(struct mxt_data *data, bool retry)
+static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
{
struct device *dev = &data->client->dev;
- int ret;
+ int error;
u8 val;
bool crc_failure;
- ret = mxt_lookup_bootloader_address(data, retry);
- if (ret)
- return ret;
+ error = mxt_lookup_bootloader_address(data, alt_address);
+ if (error)
+ return error;
- ret = mxt_bootloader_read(data, &val, 1);
- if (ret)
- return ret;
+ error = mxt_bootloader_read(data, &val, 1);
+ if (error)
+ return error;
/* Check app crc fail mode */
crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
@@ -1064,6 +1064,137 @@ static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
return crc;
}
+static int mxt_prepare_cfg_mem(struct mxt_data *data,
+ const struct firmware *cfg,
+ unsigned int data_pos,
+ unsigned int cfg_start_ofs,
+ u8 *config_mem,
+ size_t config_mem_size)
+{
+ struct device *dev = &data->client->dev;
+ struct mxt_object *object;
+ unsigned int type, instance, size, byte_offset;
+ int offset;
+ int ret;
+ int i;
+ u16 reg;
+ u8 val;
+
+ while (data_pos < cfg->size) {
+ /* Read type, instance, length */
+ ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
+ &type, &instance, &size, &offset);
+ if (ret == 0) {
+ /* EOF */
+ break;
+ } else if (ret != 3) {
+ dev_err(dev, "Bad format: failed to parse object\n");
+ return -EINVAL;
+ }
+ data_pos += offset;
+
+ object = mxt_get_object(data, type);
+ if (!object) {
+ /* Skip object */
+ for (i = 0; i < size; i++) {
+ ret = sscanf(cfg->data + data_pos, "%hhx%n",
+ &val, &offset);
+ if (ret != 1) {
+ dev_err(dev, "Bad format in T%d at %d\n",
+ type, i);
+ return -EINVAL;
+ }
+ data_pos += offset;
+ }
+ continue;
+ }
+
+ if (size > mxt_obj_size(object)) {
+ /*
+ * Either we are in fallback mode due to wrong
+ * config or config from a later fw version,
+ * or the file is corrupt or hand-edited.
+ */
+ dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
+ size - mxt_obj_size(object), type);
+ } else if (mxt_obj_size(object) > size) {
+ /*
+ * If firmware is upgraded, new bytes may be added to
+ * end of objects. It is generally forward compatible
+ * to zero these bytes - previous behaviour will be
+ * retained. However this does invalidate the CRC and
+ * will force fallback mode until the configuration is
+ * updated. We warn here but do nothing else - the
+ * malloc has zeroed the entire configuration.
+ */
+ dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
+ mxt_obj_size(object) - size, type);
+ }
+
+ if (instance >= mxt_obj_instances(object)) {
+ dev_err(dev, "Object instances exceeded!\n");
+ return -EINVAL;
+ }
+
+ reg = object->start_address + mxt_obj_size(object) * instance;
+
+ for (i = 0; i < size; i++) {
+ ret = sscanf(cfg->data + data_pos, "%hhx%n",
+ &val,
+ &offset);
+ if (ret != 1) {
+ dev_err(dev, "Bad format in T%d at %d\n",
+ type, i);
+ return -EINVAL;
+ }
+ data_pos += offset;
+
+ if (i > mxt_obj_size(object))
+ continue;
+
+ byte_offset = reg + i - cfg_start_ofs;
+
+ if (byte_offset >= 0 && byte_offset < config_mem_size) {
+ *(config_mem + byte_offset) = val;
+ } else {
+ dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
+ reg, object->type, byte_offset);
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int mxt_upload_cfg_mem(struct mxt_data *data, unsigned int cfg_start,
+ u8 *config_mem, size_t config_mem_size)
+{
+ unsigned int byte_offset = 0;
+ int error;
+
+ /* Write configuration as blocks */
+ while (byte_offset < config_mem_size) {
+ unsigned int size = config_mem_size - byte_offset;
+
+ if (size > MXT_MAX_BLOCK_WRITE)
+ size = MXT_MAX_BLOCK_WRITE;
+
+ error = __mxt_write_reg(data->client,
+ cfg_start + byte_offset,
+ size, config_mem + byte_offset);
+ if (error) {
+ dev_err(&data->client->dev,
+ "Config write error, ret=%d\n", error);
+ return error;
+ }
+
+ byte_offset += size;
+ }
+
+ return 0;
+}
+
/*
* mxt_update_cfg - download configuration to chip
*
@@ -1087,26 +1218,20 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
{
struct device *dev = &data->client->dev;
struct mxt_info cfg_info;
- struct mxt_object *object;
int ret;
int offset;
int data_pos;
- int byte_offset;
int i;
int cfg_start_ofs;
u32 info_crc, config_crc, calculated_crc;
u8 *config_mem;
size_t config_mem_size;
- unsigned int type, instance, size;
- u8 val;
- u16 reg;
mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
dev_err(dev, "Unrecognised config file\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos = strlen(MXT_CFG_MAGIC);
@@ -1118,8 +1243,7 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
&offset);
if (ret != 1) {
dev_err(dev, "Bad format\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos += offset;
@@ -1127,30 +1251,26 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
if (cfg_info.family_id != data->info.family_id) {
dev_err(dev, "Family ID mismatch!\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
if (cfg_info.variant_id != data->info.variant_id) {
dev_err(dev, "Variant ID mismatch!\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
/* Read CRCs */
ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset);
if (ret != 1) {
dev_err(dev, "Bad format: failed to parse Info CRC\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos += offset;
ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset);
if (ret != 1) {
dev_err(dev, "Bad format: failed to parse Config CRC\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos += offset;
@@ -1166,8 +1286,7 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
} else if (config_crc == data->config_crc) {
dev_dbg(dev, "Config CRC 0x%06X: OK\n",
data->config_crc);
- ret = 0;
- goto release;
+ return 0;
} else {
dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
data->config_crc, config_crc);
@@ -1186,93 +1305,13 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
config_mem = kzalloc(config_mem_size, GFP_KERNEL);
if (!config_mem) {
dev_err(dev, "Failed to allocate memory\n");
- ret = -ENOMEM;
- goto release;
+ return -ENOMEM;
}
- while (data_pos < cfg->size) {
- /* Read type, instance, length */
- ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
- &type, &instance, &size, &offset);
- if (ret == 0) {
- /* EOF */
- break;
- } else if (ret != 3) {
- dev_err(dev, "Bad format: failed to parse object\n");
- ret = -EINVAL;
- goto release_mem;
- }
- data_pos += offset;
-
- object = mxt_get_object(data, type);
- if (!object) {
- /* Skip object */
- for (i = 0; i < size; i++) {
- ret = sscanf(cfg->data + data_pos, "%hhx%n",
- &val,
- &offset);
- data_pos += offset;
- }
- continue;
- }
-
- if (size > mxt_obj_size(object)) {
- /*
- * Either we are in fallback mode due to wrong
- * config or config from a later fw version,
- * or the file is corrupt or hand-edited.
- */
- dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
- size - mxt_obj_size(object), type);
- } else if (mxt_obj_size(object) > size) {
- /*
- * If firmware is upgraded, new bytes may be added to
- * end of objects. It is generally forward compatible
- * to zero these bytes - previous behaviour will be
- * retained. However this does invalidate the CRC and
- * will force fallback mode until the configuration is
- * updated. We warn here but do nothing else - the
- * malloc has zeroed the entire configuration.
- */
- dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
- mxt_obj_size(object) - size, type);
- }
-
- if (instance >= mxt_obj_instances(object)) {
- dev_err(dev, "Object instances exceeded!\n");
- ret = -EINVAL;
- goto release_mem;
- }
-
- reg = object->start_address + mxt_obj_size(object) * instance;
-
- for (i = 0; i < size; i++) {
- ret = sscanf(cfg->data + data_pos, "%hhx%n",
- &val,
- &offset);
- if (ret != 1) {
- dev_err(dev, "Bad format in T%d\n", type);
- ret = -EINVAL;
- goto release_mem;
- }
- data_pos += offset;
-
- if (i > mxt_obj_size(object))
- continue;
-
- byte_offset = reg + i - cfg_start_ofs;
-
- if ((byte_offset >= 0)
- && (byte_offset <= config_mem_size)) {
- *(config_mem + byte_offset) = val;
- } else {
- dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
- reg, object->type, byte_offset);
- ret = -EINVAL;
- goto release_mem;
- }
- }
- }
+ ret = mxt_prepare_cfg_mem(data, cfg, data_pos, cfg_start_ofs,
+ config_mem, config_mem_size);
+ if (ret)
+ goto release_mem;
/* Calculate crc of the received configs (not the raw config file) */
if (data->T7_address < cfg_start_ofs) {
@@ -1286,28 +1325,14 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
data->T7_address - cfg_start_ofs,
config_mem_size);
- if (config_crc > 0 && (config_crc != calculated_crc))
+ if (config_crc > 0 && config_crc != calculated_crc)
dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n",
calculated_crc, config_crc);
- /* Write configuration as blocks */
- byte_offset = 0;
- while (byte_offset < config_mem_size) {
- size = config_mem_size - byte_offset;
-
- if (size > MXT_MAX_BLOCK_WRITE)
- size = MXT_MAX_BLOCK_WRITE;
-
- ret = __mxt_write_reg(data->client,
- cfg_start_ofs + byte_offset,
- size, config_mem + byte_offset);
- if (ret != 0) {
- dev_err(dev, "Config write error, ret=%d\n", ret);
- goto release_mem;
- }
-
- byte_offset += size;
- }
+ ret = mxt_upload_cfg_mem(data, cfg_start_ofs,
+ config_mem, config_mem_size);
+ if (ret)
+ goto release_mem;
mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
@@ -1319,8 +1344,6 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
release_mem:
kfree(config_mem);
-release:
- release_firmware(cfg);
return ret;
}
@@ -1422,10 +1445,12 @@ static int mxt_get_object_table(struct mxt_data *data)
switch (object->type) {
case MXT_GEN_MESSAGE_T5:
- if (data->info.family_id == 0x80) {
+ if (data->info.family_id == 0x80 &&
+ data->info.version < 0x20) {
/*
- * On mXT224 read and discard unused CRC byte
- * otherwise DMA reads are misaligned
+ * On mXT224 firmware versions prior to V2.0
+ * read and discard unused CRC byte otherwise
+ * DMA reads are misaligned.
*/
data->T5_msg_size = mxt_obj_size(object);
} else {
@@ -1433,6 +1458,7 @@ static int mxt_get_object_table(struct mxt_data *data)
data->T5_msg_size = mxt_obj_size(object) - 1;
}
data->T5_address = object->start_address;
+ break;
case MXT_GEN_COMMAND_T6:
data->T6_reportid = min_id;
data->T6_address = object->start_address;
@@ -1638,46 +1664,45 @@ static int mxt_configure_objects(struct mxt_data *data,
static void mxt_config_cb(const struct firmware *cfg, void *ctx)
{
mxt_configure_objects(ctx, cfg);
+ release_firmware(cfg);
}
static int mxt_initialize(struct mxt_data *data)
{
struct i2c_client *client = data->client;
+ int recovery_attempts = 0;
int error;
- bool alt_bootloader_addr = false;
- bool retry = false;
-retry_info:
- error = mxt_get_info(data);
- if (error) {
-retry_bootloader:
- error = mxt_probe_bootloader(data, alt_bootloader_addr);
+ while (1) {
+ error = mxt_get_info(data);
+ if (!error)
+ break;
+
+ /* Check bootloader state */
+ error = mxt_probe_bootloader(data, false);
if (error) {
- if (alt_bootloader_addr) {
+ dev_info(&client->dev, "Trying alternate bootloader address\n");
+ error = mxt_probe_bootloader(data, true);
+ if (error) {
/* Chip is not in appmode or bootloader mode */
return error;
}
+ }
- dev_info(&client->dev, "Trying alternate bootloader address\n");
- alt_bootloader_addr = true;
- goto retry_bootloader;
- } else {
- if (retry) {
- dev_err(&client->dev, "Could not recover from bootloader mode\n");
- /*
- * We can reflash from this state, so do not
- * abort init
- */
- data->in_bootloader = true;
- return 0;
- }
-
- /* Attempt to exit bootloader into app mode */
- mxt_send_bootloader_cmd(data, false);
- msleep(MXT_FW_RESET_TIME);
- retry = true;
- goto retry_info;
+ /* OK, we are in bootloader, see if we can recover */
+ if (++recovery_attempts > 1) {
+ dev_err(&client->dev, "Could not recover from bootloader mode\n");
+ /*
+ * We can reflash from this state, so do not
+ * abort initialization.
+ */
+ data->in_bootloader = true;
+ return 0;
}
+
+ /* Attempt to exit bootloader into app mode */
+ mxt_send_bootloader_cmd(data, false);
+ msleep(MXT_FW_RESET_TIME);
}
/* Get object table information */
@@ -1687,13 +1712,18 @@ retry_bootloader:
return error;
}
- mxt_acquire_irq(data);
+ error = mxt_acquire_irq(data);
if (error)
goto err_free_object_table;
- request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
- &data->client->dev, GFP_KERNEL, data,
- mxt_config_cb);
+ error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
+ &client->dev, GFP_KERNEL, data,
+ mxt_config_cb);
+ if (error) {
+ dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
+ error);
+ goto err_free_object_table;
+ }
return 0;
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 5a6d50c..8857d5b9 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -262,7 +262,6 @@ static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
case M06:
wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
- wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
wrbuf[2] = value;
wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2];
return edt_ft5x06_ts_readwrite(tsdata->client, 4,
OpenPOWER on IntegriCloud