diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/busses/i2c-mpc.c | 1 | ||||
| -rw-r--r-- | drivers/of/base.c | 2 | ||||
| -rw-r--r-- | drivers/spi/mpc52xx_psc_spi.c | 6 |
3 files changed, 4 insertions, 5 deletions
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 27443f0..a9a45fc 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -312,7 +312,6 @@ static struct i2c_adapter mpc_ops = { .name = "MPC adapter", .id = I2C_HW_MPC107, .algo = &mpc_algo, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .timeout = 1, }; diff --git a/drivers/of/base.c b/drivers/of/base.c index 4270eb4..7c79e94 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -410,7 +410,7 @@ struct of_modalias_table { char *modalias; }; static struct of_modalias_table of_modalias_table[] = { - /* Empty for now; add entries as needed */ + { "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" }, }; /** diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index 25eda71..cdb3d31 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -108,13 +108,13 @@ static void mpc52xx_psc_spi_activate_cs(struct spi_device *spi) * Because psc->ccr is defined as 16bit register instead of 32bit * just set the lower byte of BitClkDiv */ - ccr = in_be16(&psc->ccr); + ccr = in_be16((u16 __iomem *)&psc->ccr); ccr &= 0xFF00; if (cs->speed_hz) ccr |= (MCLK / cs->speed_hz - 1) & 0xFF; else /* by default SPI Clk 1MHz */ ccr |= (MCLK / 1000000 - 1) & 0xFF; - out_be16(&psc->ccr, ccr); + out_be16((u16 __iomem *)&psc->ccr, ccr); mps->bits_per_word = cs->bits_per_word; if (mps->activate_cs) @@ -347,7 +347,7 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps) /* Configure 8bit codec mode as a SPI master and use EOF flags */ /* SICR_SIM_CODEC8|SICR_GENCLK|SICR_SPI|SICR_MSTR|SICR_USEEOF */ out_be32(&psc->sicr, 0x0180C800); - out_be16(&psc->ccr, 0x070F); /* by default SPI Clk 1MHz */ + out_be16((u16 __iomem *)&psc->ccr, 0x070F); /* default SPI Clk 1MHz */ /* Set 2ms DTL delay */ out_8(&psc->ctur, 0x00); |
