diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/power/ab8500_bmdata.c | 19 | ||||
-rw-r--r-- | drivers/power/ab8500_fg.c | 146 | ||||
-rw-r--r-- | drivers/power/abx500_chargalg.c | 30 |
3 files changed, 162 insertions, 33 deletions
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index 0bf5236..20c157b 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -192,7 +192,7 @@ static struct abx500_battery_type bat_type_thermistor[] = { .nominal_voltage = 3700, .termination_vol = 4050, .termination_curr = 200, - .recharge_vol = 3990, + .recharge_cap = 95, .normal_cur_lvl = 400, .normal_vol_lvl = 4100, .maint_a_cur_lvl = 400, @@ -219,7 +219,7 @@ static struct abx500_battery_type bat_type_thermistor[] = { .nominal_voltage = 3600, .termination_vol = 4150, .termination_curr = 80, - .recharge_vol = 4130, + .recharge_cap = 95, .normal_cur_lvl = 700, .normal_vol_lvl = 4200, .maint_a_cur_lvl = 600, @@ -247,7 +247,7 @@ static struct abx500_battery_type bat_type_thermistor[] = { .nominal_voltage = 3600, .termination_vol = 4150, .termination_curr = 80, - .recharge_vol = 4130, + .recharge_cap = 95, .normal_cur_lvl = 700, .normal_vol_lvl = 4200, .maint_a_cur_lvl = 600, @@ -278,7 +278,7 @@ static struct abx500_battery_type bat_type_ext_thermistor[] = { .nominal_voltage = 3700, .termination_vol = 4050, .termination_curr = 200, - .recharge_vol = 3990, + .recharge_cap = 95, .normal_cur_lvl = 400, .normal_vol_lvl = 4100, .maint_a_cur_lvl = 400, @@ -310,7 +310,7 @@ static struct abx500_battery_type bat_type_ext_thermistor[] = { .nominal_voltage = 3700, .termination_vol = 4150, .termination_curr = 100, - .recharge_vol = 4130, + .recharge_cap = 95, .normal_cur_lvl = 700, .normal_vol_lvl = 4200, .maint_a_cur_lvl = 600, @@ -337,7 +337,7 @@ static struct abx500_battery_type bat_type_ext_thermistor[] = { .nominal_voltage = 3700, .termination_vol = 4150, .termination_curr = 100, - .recharge_vol = 4130, + .recharge_cap = 95, .normal_cur_lvl = 700, .normal_vol_lvl = 4200, .maint_a_cur_lvl = 600, @@ -364,7 +364,7 @@ static struct abx500_battery_type bat_type_ext_thermistor[] = { .nominal_voltage = 3700, .termination_vol = 4150, .termination_curr = 100, - .recharge_vol = 4130, + .recharge_cap = 95, .normal_cur_lvl = 700, .normal_vol_lvl = 4200, .maint_a_cur_lvl = 600, @@ -405,8 +405,8 @@ static const struct abx500_fg_parameters fg = { .lowbat_threshold = 3100, .battok_falling_th_sel0 = 2860, .battok_raising_th_sel1 = 2860, + .maint_thres = 95, .user_cap_limit = 15, - .maint_thres = 97, }; static const struct abx500_maxim_parameters maxi_params = { @@ -435,6 +435,7 @@ struct abx500_bm_data ab8500_bm_data = { .bkup_bat_v = BUP_VCH_SEL_2P6V, .bkup_bat_i = BUP_ICH_SEL_150UA, .no_maintenance = false, + .capacity_scaling = false, .adc_therm = ABx500_ADC_THERM_BATCTRL, .chg_unknown_bat = false, .enable_overshoot = false, @@ -479,7 +480,7 @@ int __devinit ab8500_bm_of_probe(struct device *dev, bm->chg_unknown_bat = true; bm->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600; bm->bat_type[BATTERY_UNKNOWN].termination_vol = 4150; - bm->bat_type[BATTERY_UNKNOWN].recharge_vol = 4130; + bm->bat_type[BATTERY_UNKNOWN].recharge_cap = 95; bm->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520; bm->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200; } diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index f3dbba8..76fab6b 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -113,6 +113,13 @@ struct ab8500_fg_avg_cap { int sum; }; +struct ab8500_fg_cap_scaling { + bool enable; + int cap_to_scale[2]; + int disable_cap_level; + int scaled_cap; +}; + struct ab8500_fg_battery_capacity { int max_mah_design; int max_mah; @@ -123,6 +130,7 @@ struct ab8500_fg_battery_capacity { int prev_percent; int prev_level; int user_mah; + struct ab8500_fg_cap_scaling cap_scale; }; struct ab8500_fg_flags { @@ -1167,6 +1175,99 @@ static int ab8500_fg_capacity_level(struct ab8500_fg *di) } /** + * ab8500_fg_calculate_scaled_capacity() - Capacity scaling + * @di: pointer to the ab8500_fg structure + * + * Calculates the capacity to be shown to upper layers. Scales the capacity + * to have 100% as a reference from the actual capacity upon removal of charger + * when charging is in maintenance mode. + */ +static int ab8500_fg_calculate_scaled_capacity(struct ab8500_fg *di) +{ + struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale; + int capacity = di->bat_cap.prev_percent; + + if (!cs->enable) + return capacity; + + /* + * As long as we are in fully charge mode scale the capacity + * to show 100%. + */ + if (di->flags.fully_charged) { + cs->cap_to_scale[0] = 100; + cs->cap_to_scale[1] = + max(capacity, di->bm->fg_params->maint_thres); + dev_dbg(di->dev, "Scale cap with %d/%d\n", + cs->cap_to_scale[0], cs->cap_to_scale[1]); + } + + /* Calculates the scaled capacity. */ + if ((cs->cap_to_scale[0] != cs->cap_to_scale[1]) + && (cs->cap_to_scale[1] > 0)) + capacity = min(100, + DIV_ROUND_CLOSEST(di->bat_cap.prev_percent * + cs->cap_to_scale[0], + cs->cap_to_scale[1])); + + if (di->flags.charging) { + if (capacity < cs->disable_cap_level) { + cs->disable_cap_level = capacity; + dev_dbg(di->dev, "Cap to stop scale lowered %d%%\n", + cs->disable_cap_level); + } else if (!di->flags.fully_charged) { + if (di->bat_cap.prev_percent >= + cs->disable_cap_level) { + dev_dbg(di->dev, "Disabling scaled capacity\n"); + cs->enable = false; + capacity = di->bat_cap.prev_percent; + } else { + dev_dbg(di->dev, + "Waiting in cap to level %d%%\n", + cs->disable_cap_level); + capacity = cs->disable_cap_level; + } + } + } + + return capacity; +} + +/** + * ab8500_fg_update_cap_scalers() - Capacity scaling + * @di: pointer to the ab8500_fg structure + * + * To be called when state change from charge<->discharge to update + * the capacity scalers. + */ +static void ab8500_fg_update_cap_scalers(struct ab8500_fg *di) +{ + struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale; + + if (!cs->enable) + return; + if (di->flags.charging) { + di->bat_cap.cap_scale.disable_cap_level = + di->bat_cap.cap_scale.scaled_cap; + dev_dbg(di->dev, "Cap to stop scale at charge %d%%\n", + di->bat_cap.cap_scale.disable_cap_level); + } else { + if (cs->scaled_cap != 100) { + cs->cap_to_scale[0] = cs->scaled_cap; + cs->cap_to_scale[1] = di->bat_cap.prev_percent; + } else { + cs->cap_to_scale[0] = 100; + cs->cap_to_scale[1] = + max(di->bat_cap.prev_percent, + di->bm->fg_params->maint_thres); + } + + dev_dbg(di->dev, "Cap to scale at discharge %d/%d\n", + cs->cap_to_scale[0], cs->cap_to_scale[1]); + } +} + +/** * ab8500_fg_check_capacity_limits() - Check if capacity has changed * @di: pointer to the ab8500_fg structure * @init: capacity is allowed to go up in init mode @@ -1214,16 +1315,24 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init) } else if (di->flags.fully_charged) { /* * We report 100% if algorithm reported fully charged - * unless capacity drops too much + * and show 100% during maintenance charging (scaling). */ if (di->flags.force_full) { di->bat_cap.prev_percent = di->bat_cap.permille / 10; di->bat_cap.prev_mah = di->bat_cap.mah; - } else if (!di->flags.force_full && - di->bat_cap.prev_percent != - (di->bat_cap.permille) / 10 && - (di->bat_cap.permille / 10) < - di->bm->fg_params->maint_thres) { + + changed = true; + + if (!di->bat_cap.cap_scale.enable && + di->bm->capacity_scaling) { + di->bat_cap.cap_scale.enable = true; + di->bat_cap.cap_scale.cap_to_scale[0] = 100; + di->bat_cap.cap_scale.cap_to_scale[1] = + di->bat_cap.prev_percent; + di->bat_cap.cap_scale.disable_cap_level = 100; + } + } else if ( di->bat_cap.prev_percent != + (di->bat_cap.permille) / 10) { dev_dbg(di->dev, "battery reported full " "but capacity dropping: %d\n", @@ -1272,6 +1381,14 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init) } if (changed) { + if (di->bm->capacity_scaling) { + di->bat_cap.cap_scale.scaled_cap = + ab8500_fg_calculate_scaled_capacity(di); + + dev_info(di->dev, "capacity=%d (%d)\n", + di->bat_cap.prev_percent, + di->bat_cap.cap_scale.scaled_cap); + } power_supply_changed(&di->fg_psy); if (di->flags.fully_charged && di->flags.force_full) { dev_dbg(di->dev, "Battery full, notifying.\n"); @@ -1337,7 +1454,7 @@ static void ab8500_fg_algorithm_charging(struct ab8500_fg *di) * Read the FG and calculate the new capacity */ mutex_lock(&di->cc_lock); - if (!di->flags.conv_done) { + if (!di->flags.conv_done && !di->flags.force_full) { /* Wasn't the CC IRQ that got us here */ mutex_unlock(&di->cc_lock); dev_dbg(di->dev, "%s CC conv not done\n", @@ -2027,7 +2144,9 @@ static int ab8500_fg_get_property(struct power_supply *psy, val->intval = di->bat_cap.prev_mah; break; case POWER_SUPPLY_PROP_CAPACITY: - if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && + if (di->bm->capacity_scaling) + val->intval = di->bat_cap.cap_scale.scaled_cap; + else if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && di->flags.batt_id_received) val->intval = 100; else @@ -2091,6 +2210,8 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) break; di->flags.charging = false; di->flags.fully_charged = false; + if (di->bm->capacity_scaling) + ab8500_fg_update_cap_scalers(di); queue_work(di->fg_wq, &di->fg_work); break; case POWER_SUPPLY_STATUS_FULL: @@ -2103,10 +2224,13 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) queue_work(di->fg_wq, &di->fg_work); break; case POWER_SUPPLY_STATUS_CHARGING: - if (di->flags.charging) + if (di->flags.charging && + !di->flags.fully_charged) break; di->flags.charging = true; di->flags.fully_charged = false; + if (di->bm->capacity_scaling) + ab8500_fg_update_cap_scalers(di); queue_work(di->fg_wq, &di->fg_work); break; }; @@ -2146,8 +2270,8 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) case POWER_SUPPLY_PROP_TEMP: switch (ext->type) { case POWER_SUPPLY_TYPE_BATTERY: - if (di->flags.batt_id_received) - di->bat_temp = ret.intval; + if (di->flags.batt_id_received) + di->bat_temp = ret.intval; break; default: break; diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c index 8b69da0..78b6235 100644 --- a/drivers/power/abx500_chargalg.c +++ b/drivers/power/abx500_chargalg.c @@ -33,9 +33,6 @@ /* End-of-charge criteria counter */ #define EOC_COND_CNT 10 -/* Recharge criteria counter */ -#define RCH_COND_CNT 3 - #define to_abx500_chargalg_device_info(x) container_of((x), \ struct abx500_chargalg, chargalg_psy); @@ -196,7 +193,6 @@ enum maxim_ret { * @dev: pointer to the structure device * @charge_status: battery operating status * @eoc_cnt: counter used to determine end-of_charge - * @rch_cnt: counter used to determine start of recharge * @maintenance_chg: indicate if maintenance charge is active * @t_hyst_norm temperature hysteresis when the temperature has been * over or under normal limits @@ -223,7 +219,6 @@ struct abx500_chargalg { struct device *dev; int charge_status; int eoc_cnt; - int rch_cnt; bool maintenance_chg; int t_hyst_norm; int t_hyst_lowhigh; @@ -858,6 +853,7 @@ static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data) union power_supply_propval ret; int i, j; bool psy_found = false; + bool capacity_updated = false; psy = (struct power_supply *)data; ext = dev_get_drvdata(dev); @@ -870,6 +866,16 @@ static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data) if (!psy_found) return 0; + /* + * If external is not registering 'POWER_SUPPLY_PROP_CAPACITY' to its + * property because of handling that sysfs entry on its own, this is + * the place to get the battery capacity. + */ + if (!ext->get_property(ext, POWER_SUPPLY_PROP_CAPACITY, &ret)) { + di->batt_data.percent = ret.intval; + capacity_updated = true; + } + /* Go through all properties for the psy */ for (j = 0; j < ext->num_properties; j++) { enum power_supply_property prop; @@ -1154,7 +1160,8 @@ static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data) } break; case POWER_SUPPLY_PROP_CAPACITY: - di->batt_data.percent = ret.intval; + if (!capacity_updated) + di->batt_data.percent = ret.intval; break; default: break; @@ -1424,16 +1431,13 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) case STATE_WAIT_FOR_RECHARGE_INIT: abx500_chargalg_hold_charging(di); abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE); - di->rch_cnt = RCH_COND_CNT; /* Intentional fallthrough */ case STATE_WAIT_FOR_RECHARGE: - if (di->batt_data.volt <= - di->bm->bat_type[di->bm->batt_id].recharge_vol) { - if (di->rch_cnt-- == 0) - abx500_chargalg_state_to(di, STATE_NORMAL_INIT); - } else - di->rch_cnt = RCH_COND_CNT; + if (di->batt_data.percent <= + di->bm->bat_type[di->bm->batt_id]. + recharge_cap) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); break; case STATE_MAINTENANCE_A_INIT: |