diff options
Diffstat (limited to 'drivers')
220 files changed, 8271 insertions, 3179 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index d7f9839..8a851d0 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -9,6 +9,7 @@ menuconfig ACPI depends on PCI depends on PM select PNP + select CPU_IDLE default y ---help--- Advanced Configuration and Power Interface (ACPI) support for @@ -253,13 +254,6 @@ config ACPI_PCI_SLOT help you correlate PCI bus addresses with the physical geography of your slots. If you are unsure, say N. -config ACPI_SYSTEM - bool - default y - help - This driver will enable your system to shut down using ACPI, and - dump your ACPI DSDT table using /proc/acpi/dsdt. - config X86_PM_TIMER bool "Power Management Timer Support" if EMBEDDED depends on X86 @@ -287,7 +281,7 @@ config ACPI_CONTAINER support physical cpu/memory hot-plug. If one selects "m", this driver can be loaded with - "modprobe acpi_container". + "modprobe container". config ACPI_HOTPLUG_MEMORY tristate "Memory Hotplug" diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 65d90c7..b130ea0 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -52,7 +52,7 @@ obj-$(CONFIG_ACPI_PROCESSOR) += processor.o obj-$(CONFIG_ACPI_CONTAINER) += container.o obj-$(CONFIG_ACPI_THERMAL) += thermal.o obj-y += power.o -obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o +obj-y += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o obj-$(CONFIG_ACPI_NUMA) += numa.o obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 9684cc8..22ce489 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -538,10 +538,9 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags) if (ACPI_FAILURE(status)) { ACPI_WARNING((AE_INFO, "Truncating %u table entries!", - (unsigned) - (acpi_gbl_root_table_list.size - - acpi_gbl_root_table_list. - count))); + (unsigned) (table_count - + (acpi_gbl_root_table_list. + count - 2)))); break; } } diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c index da9450bc..9c9897d 100644 --- a/drivers/acpi/acpica/uteval.c +++ b/drivers/acpi/acpica/uteval.c @@ -116,9 +116,9 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) return_ACPI_STATUS(AE_NO_MEMORY); } - /* Default return value is SUPPORTED */ + /* Default return value is 0, NOT-SUPPORTED */ - return_desc->integer.value = ACPI_UINT32_MAX; + return_desc->integer.value = 0; walk_state->return_desc = return_desc; /* Compare input string to static table of supported interfaces */ @@ -127,10 +127,8 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) if (!ACPI_STRCMP (string_desc->string.pointer, acpi_interfaces_supported[i])) { - - /* The interface is supported */ - - return_ACPI_STATUS(AE_OK); + return_desc->integer.value = ACPI_UINT32_MAX; + goto done; } } @@ -141,15 +139,14 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) */ status = acpi_os_validate_interface(string_desc->string.pointer); if (ACPI_SUCCESS(status)) { - - /* The interface is supported */ - - return_ACPI_STATUS(AE_OK); + return_desc->integer.value = ACPI_UINT32_MAX; } - /* The interface is not supported */ +done: + ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO, "ACPI: BIOS _OSI(%s) %ssupported\n", + string_desc->string.pointer, + return_desc->integer.value == 0 ? "not-" : "")); - return_desc->integer.value = 0; return_ACPI_STATUS(AE_OK); } diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 65132f9..69cbc57 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -138,6 +138,29 @@ static int acpi_battery_technology(struct acpi_battery *battery) static int acpi_battery_get_state(struct acpi_battery *battery); +static int acpi_battery_is_charged(struct acpi_battery *battery) +{ + /* either charging or discharging */ + if (battery->state != 0) + return 0; + + /* battery not reporting charge */ + if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN || + battery->capacity_now == 0) + return 0; + + /* good batteries update full_charge as the batteries degrade */ + if (battery->full_charge_capacity == battery->capacity_now) + return 1; + + /* fallback to using design values for broken batteries */ + if (battery->design_capacity == battery->capacity_now) + return 1; + + /* we don't do any sort of metric based on percentages */ + return 0; +} + static int acpi_battery_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -155,7 +178,7 @@ static int acpi_battery_get_property(struct power_supply *psy, val->intval = POWER_SUPPLY_STATUS_DISCHARGING; else if (battery->state & 0x02) val->intval = POWER_SUPPLY_STATUS_CHARGING; - else if (battery->state == 0) + else if (acpi_battery_is_charged(battery)) val->intval = POWER_SUPPLY_STATUS_FULL; else val->intval = POWER_SUPPLY_STATUS_UNKNOWN; diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c index 17020c1..fe0cdf8 100644 --- a/drivers/acpi/container.c +++ b/drivers/acpi/container.c @@ -163,7 +163,7 @@ static void container_notify_cb(acpi_handle handle, u32 type, void *context) case ACPI_NOTIFY_BUS_CHECK: /* Fall through */ case ACPI_NOTIFY_DEVICE_CHECK: - printk("Container driver received %s event\n", + printk(KERN_WARNING "Container driver received %s event\n", (type == ACPI_NOTIFY_BUS_CHECK) ? "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"); status = acpi_bus_get_device(handle, &device); @@ -174,7 +174,8 @@ static void container_notify_cb(acpi_handle handle, u32 type, void *context) kobject_uevent(&device->dev.kobj, KOBJ_ONLINE); else - printk("Failed to add container\n"); + printk(KERN_WARNING + "Failed to add container\n"); } } else { if (ACPI_SUCCESS(status)) { diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 5b30b8d..35094f2 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -855,10 +855,14 @@ fdd_out: static ssize_t show_docked(struct device *dev, struct device_attribute *attr, char *buf) { + struct acpi_device *tmp; + struct dock_station *dock_station = *((struct dock_station **) dev->platform_data); - return snprintf(buf, PAGE_SIZE, "%d\n", dock_present(dock_station)); + if (ACPI_SUCCESS(acpi_bus_get_device(dock_station->handle, &tmp))) + return snprintf(buf, PAGE_SIZE, "1\n"); + return snprintf(buf, PAGE_SIZE, "0\n"); } static DEVICE_ATTR(docked, S_IRUGO, show_docked, NULL); @@ -984,7 +988,7 @@ static int dock_add(acpi_handle handle) ret = device_create_file(&dock_device->dev, &dev_attr_docked); if (ret) { - printk("Error %d adding sysfs file\n", ret); + printk(KERN_ERR "Error %d adding sysfs file\n", ret); platform_device_unregister(dock_device); kfree(dock_station); dock_station = NULL; @@ -992,7 +996,7 @@ static int dock_add(acpi_handle handle) } ret = device_create_file(&dock_device->dev, &dev_attr_undock); if (ret) { - printk("Error %d adding sysfs file\n", ret); + printk(KERN_ERR "Error %d adding sysfs file\n", ret); device_remove_file(&dock_device->dev, &dev_attr_docked); platform_device_unregister(dock_device); kfree(dock_station); @@ -1001,7 +1005,7 @@ static int dock_add(acpi_handle handle) } ret = device_create_file(&dock_device->dev, &dev_attr_uid); if (ret) { - printk("Error %d adding sysfs file\n", ret); + printk(KERN_ERR "Error %d adding sysfs file\n", ret); device_remove_file(&dock_device->dev, &dev_attr_docked); device_remove_file(&dock_device->dev, &dev_attr_undock); platform_device_unregister(dock_device); @@ -1011,7 +1015,7 @@ static int dock_add(acpi_handle handle) } ret = device_create_file(&dock_device->dev, &dev_attr_flags); if (ret) { - printk("Error %d adding sysfs file\n", ret); + printk(KERN_ERR "Error %d adding sysfs file\n", ret); device_remove_file(&dock_device->dev, &dev_attr_docked); device_remove_file(&dock_device->dev, &dev_attr_undock); device_remove_file(&dock_device->dev, &dev_attr_uid); diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index a2b82c9..2fe1506 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -120,6 +120,8 @@ static struct acpi_ec { spinlock_t curr_lock; } *boot_ec, *first_ec; +static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */ + /* -------------------------------------------------------------------------- Transaction Management -------------------------------------------------------------------------- */ @@ -259,6 +261,8 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); acpi_disable_gpe(NULL, ec->gpe); } + if (EC_FLAGS_MSI) + udelay(ACPI_EC_DELAY); /* start transaction */ spin_lock_irqsave(&ec->curr_lock, tmp); /* following two actions should be kept atomic */ @@ -967,6 +971,11 @@ int __init acpi_ec_ecdt_probe(void) /* * Generate a boot ec context */ + if (dmi_name_in_vendors("Micro-Star") || + dmi_name_in_vendors("Notebook")) { + pr_info(PREFIX "Enabling special treatment for EC from MSI.\n"); + EC_FLAGS_MSI = 1; + } status = acpi_get_table(ACPI_SIG_ECDT, 1, (struct acpi_table_header **)&ecdt_ptr); if (ACPI_SUCCESS(status)) { @@ -982,7 +991,7 @@ int __init acpi_ec_ecdt_probe(void) saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL); if (!saved_ec) return -ENOMEM; - memcpy(&saved_ec, boot_ec, sizeof(saved_ec)); + memcpy(saved_ec, boot_ec, sizeof(*saved_ec)); /* fall through */ } /* This workaround is needed only on some broken machines, diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index adec3d1..5479b9f 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -255,12 +255,12 @@ static int acpi_platform_notify(struct device *dev) } type = acpi_get_bus_type(dev->bus); if (!type) { - DBG("No ACPI bus support for %s\n", dev->bus_id); + DBG("No ACPI bus support for %s\n", dev_name(dev)); ret = -EINVAL; goto end; } if ((ret = type->find_device(dev, &handle)) != 0) - DBG("Can't get handler for %s\n", dev->bus_id); + DBG("Can't get handler for %s\n", dev_name(dev)); end: if (!ret) acpi_bind_one(dev, handle); @@ -271,10 +271,10 @@ static int acpi_platform_notify(struct device *dev) acpi_get_name(dev->archdata.acpi_handle, ACPI_FULL_PATHNAME, &buffer); - DBG("Device %s -> %s\n", dev->bus_id, (char *)buffer.pointer); + DBG("Device %s -> %s\n", dev_name(dev), (char *)buffer.pointer); kfree(buffer.pointer); } else - DBG("Device %s -> No ACPI support\n", dev->bus_id); + DBG("Device %s -> No ACPI support\n", dev_name(dev)); #endif return ret; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 6729a49..b3193ec 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -228,10 +228,10 @@ void acpi_os_vprintf(const char *fmt, va_list args) if (acpi_in_debugger) { kdb_printf("%s", buffer); } else { - printk("%s", buffer); + printk(KERN_CONT "%s", buffer); } #else - printk("%s", buffer); + printk(KERN_CONT "%s", buffer); #endif } @@ -1317,6 +1317,54 @@ acpi_os_validate_interface (char *interface) return AE_SUPPORT; } +#ifdef CONFIG_X86 + +struct aml_port_desc { + uint start; + uint end; + char* name; + char warned; +}; + +static struct aml_port_desc aml_invalid_port_list[] = { + {0x20, 0x21, "PIC0", 0}, + {0xA0, 0xA1, "PIC1", 0}, + {0x4D0, 0x4D1, "ELCR", 0} +}; + +/* + * valid_aml_io_address() + * + * if valid, return true + * else invalid, warn once, return false + */ +static bool valid_aml_io_address(uint address, uint length) +{ + int i; + int entries = sizeof(aml_invalid_port_list) / sizeof(struct aml_port_desc); + + for (i = 0; i < entries; ++i) { + if ((address >= aml_invalid_port_list[i].start && + address <= aml_invalid_port_list[i].end) || + (address + length >= aml_invalid_port_list[i].start && + address + length <= aml_invalid_port_list[i].end)) + { + if (!aml_invalid_port_list[i].warned) + { + printk(KERN_ERR "ACPI: Denied BIOS AML access" + " to invalid port 0x%x+0x%x (%s)\n", + address, length, + aml_invalid_port_list[i].name); + aml_invalid_port_list[i].warned = 1; + } + return false; /* invalid */ + } + } + return true; /* valid */ +} +#else +static inline bool valid_aml_io_address(uint address, uint length) { return true; } +#endif /****************************************************************************** * * FUNCTION: acpi_os_validate_address @@ -1346,6 +1394,8 @@ acpi_os_validate_address ( switch (space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: + if (!valid_aml_io_address(address, length)) + return AE_AML_ILLEGAL_ADDRESS; case ACPI_ADR_SPACE_SYSTEM_MEMORY: /* Only interference checks against SystemIO and SytemMemory are needed */ diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 1c6e73c..6c772ca 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -593,7 +593,7 @@ static int acpi_pci_link_allocate(struct acpi_pci_link *link) return -ENODEV; } else { acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_USING; - printk(PREFIX "%s [%s] enabled at IRQ %d\n", + printk(KERN_WARNING PREFIX "%s [%s] enabled at IRQ %d\n", acpi_device_name(link->device), acpi_device_bid(link->device), link->irq.active); } diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 66a9d81..7bc22a4 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -66,43 +66,17 @@ ACPI_MODULE_NAME("processor_idle"); #define ACPI_PROCESSOR_FILE_POWER "power" #define US_TO_PM_TIMER_TICKS(t) ((t * (PM_TIMER_FREQUENCY/1000)) / 1000) #define PM_TIMER_TICK_NS (1000000000ULL/PM_TIMER_FREQUENCY) -#ifndef CONFIG_CPU_IDLE -#define C2_OVERHEAD 4 /* 1us (3.579 ticks per us) */ -#define C3_OVERHEAD 4 /* 1us (3.579 ticks per us) */ -static void (*pm_idle_save) (void) __read_mostly; -#else #define C2_OVERHEAD 1 /* 1us */ #define C3_OVERHEAD 1 /* 1us */ -#endif #define PM_TIMER_TICKS_TO_US(p) (((p) * 1000)/(PM_TIMER_FREQUENCY/1000)) static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER; -#ifdef CONFIG_CPU_IDLE module_param(max_cstate, uint, 0000); -#else -module_param(max_cstate, uint, 0644); -#endif static unsigned int nocst __read_mostly; module_param(nocst, uint, 0000); -#ifndef CONFIG_CPU_IDLE -/* - * bm_history -- bit-mask with a bit per jiffy of bus-master activity - * 1000 HZ: 0xFFFFFFFF: 32 jiffies = 32ms - * 800 HZ: 0xFFFFFFFF: 32 jiffies = 40ms - * 100 HZ: 0x0000000F: 4 jiffies = 40ms - * reduce history for more aggressive entry into C3 - */ -static unsigned int bm_history __read_mostly = - (HZ >= 800 ? 0xFFFFFFFF : ((1U << (HZ / 25)) - 1)); -module_param(bm_history, uint, 0644); - -static int acpi_processor_set_power_policy(struct acpi_processor *pr); - -#else /* CONFIG_CPU_IDLE */ static unsigned int latency_factor __read_mostly = 2; module_param(latency_factor, uint, 0644); -#endif /* * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3. @@ -224,71 +198,6 @@ static void acpi_safe_halt(void) current_thread_info()->status |= TS_POLLING; } -#ifndef CONFIG_CPU_IDLE - -static void -acpi_processor_power_activate(struct acpi_processor *pr, - struct acpi_processor_cx *new) -{ - struct acpi_processor_cx *old; - - if (!pr || !new) - return; - - old = pr->power.state; - - if (old) - old->promotion.count = 0; - new->demotion.count = 0; - - /* Cleanup from old state. */ - if (old) { - switch (old->type) { - case ACPI_STATE_C3: - /* Disable bus master reload */ - if (new->type != ACPI_STATE_C3 && pr->flags.bm_check) - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - break; - } - } - - /* Prepare to use new state. */ - switch (new->type) { - case ACPI_STATE_C3: - /* Enable bus master reload */ - if (old->type != ACPI_STATE_C3 && pr->flags.bm_check) - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1); - break; - } - - pr->power.state = new; - - return; -} - -static atomic_t c3_cpu_count; - -/* Common C-state entry for C2, C3, .. */ -static void acpi_cstate_enter(struct acpi_processor_cx *cstate) -{ - /* Don't trace irqs off for idle */ - stop_critical_timings(); - if (cstate->entry_method == ACPI_CSTATE_FFH) { - /* Call into architectural FFH based C-state */ - acpi_processor_ffh_cstate_enter(cstate); - } else { - int unused; - /* IO port based C-state */ - inb(cstate->address); - /* Dummy wait op - must do something useless after P_LVL2 read - because chipsets cannot guarantee that STPCLK# signal - gets asserted in time to freeze execution properly. */ - unused = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - start_critical_timings(); -} -#endif /* !CONFIG_CPU_IDLE */ - #ifdef ARCH_APICTIMER_STOPS_ON_C3 /* @@ -390,421 +299,6 @@ static int tsc_halts_in_c(int state) } #endif -#ifndef CONFIG_CPU_IDLE -static void acpi_processor_idle(void) -{ - struct acpi_processor *pr = NULL; - struct acpi_processor_cx *cx = NULL; - struct acpi_processor_cx *next_state = NULL; - int sleep_ticks = 0; - u32 t1, t2 = 0; - - /* - * Interrupts must be disabled during bus mastering calculations and - * for C2/C3 transitions. - */ - local_irq_disable(); - - pr = __get_cpu_var(processors); - if (!pr) { - local_irq_enable(); - return; - } - - /* - * Check whether we truly need to go idle, or should - * reschedule: - */ - if (unlikely(need_resched())) { - local_irq_enable(); - return; - } - - cx = pr->power.state; - if (!cx || acpi_idle_suspend) { - if (pm_idle_save) { - pm_idle_save(); /* enables IRQs */ - } else { - acpi_safe_halt(); - local_irq_enable(); - } - - return; - } - - /* - * Check BM Activity - * ----------------- - * Check for bus mastering activity (if required), record, and check - * for demotion. - */ - if (pr->flags.bm_check) { - u32 bm_status = 0; - unsigned long diff = jiffies - pr->power.bm_check_timestamp; - - if (diff > 31) - diff = 31; - - pr->power.bm_activity <<= diff; - - acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); - if (bm_status) { - pr->power.bm_activity |= 0x1; - acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1); - } - /* - * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect - * the true state of bus mastering activity; forcing us to - * manually check the BMIDEA bit of each IDE channel. - */ - else if (errata.piix4.bmisx) { - if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01) - || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01)) - pr->power.bm_activity |= 0x1; - } - - pr->power.bm_check_timestamp = jiffies; - - /* - * If bus mastering is or was active this jiffy, demote - * to avoid a faulty transition. Note that the processor - * won't enter a low-power state during this call (to this - * function) but should upon the next. - * - * TBD: A better policy might be to fallback to the demotion - * state (use it for this quantum only) istead of - * demoting -- and rely on duration as our sole demotion - * qualification. This may, however, introduce DMA - * issues (e.g. floppy DMA transfer overrun/underrun). - */ - if ((pr->power.bm_activity & 0x1) && - cx->demotion.threshold.bm) { - local_irq_enable(); - next_state = cx->demotion.state; - goto end; - } - } - -#ifdef CONFIG_HOTPLUG_CPU - /* - * Check for P_LVL2_UP flag before entering C2 and above on - * an SMP system. We do it here instead of doing it at _CST/P_LVL - * detection phase, to work cleanly with logical CPU hotplug. - */ - if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) && - !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) - cx = &pr->power.states[ACPI_STATE_C1]; -#endif - - /* - * Sleep: - * ------ - * Invoke the current Cx state to put the processor to sleep. - */ - if (cx->type == ACPI_STATE_C2 || cx->type == ACPI_STATE_C3) { - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - if (need_resched()) { - current_thread_info()->status |= TS_POLLING; - local_irq_enable(); - return; - } - } - - switch (cx->type) { - - case ACPI_STATE_C1: - /* - * Invoke C1. - * Use the appropriate idle routine, the one that would - * be used without acpi C-states. - */ - if (pm_idle_save) { - pm_idle_save(); /* enables IRQs */ - } else { - acpi_safe_halt(); - local_irq_enable(); - } - - /* - * TBD: Can't get time duration while in C1, as resumes - * go to an ISR rather than here. Need to instrument - * base interrupt handler. - * - * Note: the TSC better not stop in C1, sched_clock() will - * skew otherwise. - */ - sleep_ticks = 0xFFFFFFFF; - - break; - - case ACPI_STATE_C2: - /* Get start time (ticks) */ - t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); - /* Tell the scheduler that we are going deep-idle: */ - sched_clock_idle_sleep_event(); - /* Invoke C2 */ - acpi_state_timer_broadcast(pr, cx, 1); - acpi_cstate_enter(cx); - /* Get end time (ticks) */ - t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); - -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) - /* TSC halts in C2, so notify users */ - if (tsc_halts_in_c(ACPI_STATE_C2)) - mark_tsc_unstable("possible TSC halt in C2"); -#endif - /* Compute time (ticks) that we were actually asleep */ - sleep_ticks = ticks_elapsed(t1, t2); - - /* Tell the scheduler how much we idled: */ - sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); - - /* Re-enable interrupts */ - local_irq_enable(); - /* Do not account our idle-switching overhead: */ - sleep_ticks -= cx->latency_ticks + C2_OVERHEAD; - - current_thread_info()->status |= TS_POLLING; - acpi_state_timer_broadcast(pr, cx, 0); - break; - - case ACPI_STATE_C3: - acpi_unlazy_tlb(smp_processor_id()); - /* - * Must be done before busmaster disable as we might - * need to access HPET ! - */ - acpi_state_timer_broadcast(pr, cx, 1); - /* - * disable bus master - * bm_check implies we need ARB_DIS - * !bm_check implies we need cache flush - * bm_control implies whether we can do ARB_DIS - * - * That leaves a case where bm_check is set and bm_control is - * not set. In that case we cannot do much, we enter C3 - * without doing anything. - */ - if (pr->flags.bm_check && pr->flags.bm_control) { - if (atomic_inc_return(&c3_cpu_count) == - num_online_cpus()) { - /* - * All CPUs are trying to go to C3 - * Disable bus master arbitration - */ - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1); - } - } else if (!pr->flags.bm_check) { - /* SMP with no shared cache... Invalidate cache */ - ACPI_FLUSH_CPU_CACHE(); - } - - /* Get start time (ticks) */ - t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); - /* Invoke C3 */ - /* Tell the scheduler that we are going deep-idle: */ - sched_clock_idle_sleep_event(); - acpi_cstate_enter(cx); - /* Get end time (ticks) */ - t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); - if (pr->flags.bm_check && pr->flags.bm_control) { - /* Enable bus master arbitration */ - atomic_dec(&c3_cpu_count); - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); - } - -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) - /* TSC halts in C3, so notify users */ - if (tsc_halts_in_c(ACPI_STATE_C3)) - mark_tsc_unstable("TSC halts in C3"); -#endif - /* Compute time (ticks) that we were actually asleep */ - sleep_ticks = ticks_elapsed(t1, t2); - /* Tell the scheduler how much we idled: */ - sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); - - /* Re-enable interrupts */ - local_irq_enable(); - /* Do not account our idle-switching overhead: */ - sleep_ticks -= cx->latency_ticks + C3_OVERHEAD; - - current_thread_info()->status |= TS_POLLING; - acpi_state_timer_broadcast(pr, cx, 0); - break; - - default: - local_irq_enable(); - return; - } - cx->usage++; - if ((cx->type != ACPI_STATE_C1) && (sleep_ticks > 0)) - cx->time += sleep_ticks; - - next_state = pr->power.state; - -#ifdef CONFIG_HOTPLUG_CPU - /* Don't do promotion/demotion */ - if ((cx->type == ACPI_STATE_C1) && (num_online_cpus() > 1) && - !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) { - next_state = cx; - goto end; - } -#endif - - /* - * Promotion? - * ---------- - * Track the number of longs (time asleep is greater than threshold) - * and promote when the count threshold is reached. Note that bus - * mastering activity may prevent promotions. - * Do not promote above max_cstate. - */ - if (cx->promotion.state && - ((cx->promotion.state - pr->power.states) <= max_cstate)) { - if (sleep_ticks > cx->promotion.threshold.ticks && - cx->promotion.state->latency <= - pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) { - cx->promotion.count++; - cx->demotion.count = 0; - if (cx->promotion.count >= - cx->promotion.threshold.count) { - if (pr->flags.bm_check) { - if (! - (pr->power.bm_activity & cx-> - promotion.threshold.bm)) { - next_state = - cx->promotion.state; - goto end; - } - } else { - next_state = cx->promotion.state; - goto end; - } - } - } - } - - /* - * Demotion? - * --------- - * Track the number of shorts (time asleep is less than time threshold) - * and demote when the usage threshold is reached. - */ - if (cx->demotion.state) { - if (sleep_ticks < cx->demotion.threshold.ticks) { - cx->demotion.count++; - cx->promotion.count = 0; - if (cx->demotion.count >= cx->demotion.threshold.count) { - next_state = cx->demotion.state; - goto end; - } - } - } - - end: - /* - * Demote if current state exceeds max_cstate - * or if the latency of the current state is unacceptable - */ - if ((pr->power.state - pr->power.states) > max_cstate || - pr->power.state->latency > - pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) { - if (cx->demotion.state) - next_state = cx->demotion.state; - } - - /* - * New Cx State? - * ------------- - * If we're going to start using a new Cx state we must clean up - * from the previous and prepare to use the new. - */ - if (next_state != pr->power.state) - acpi_processor_power_activate(pr, next_state); -} - -static int acpi_processor_set_power_policy(struct acpi_processor *pr) -{ - unsigned int i; - unsigned int state_is_set = 0; - struct acpi_processor_cx *lower = NULL; - struct acpi_processor_cx *higher = NULL; - struct acpi_processor_cx *cx; - - - if (!pr) - return -EINVAL; - - /* - * This function sets the default Cx state policy (OS idle handler). - * Our scheme is to promote quickly to C2 but more conservatively - * to C3. We're favoring C2 for its characteristics of low latency - * (quick response), good power savings, and ability to allow bus - * mastering activity. Note that the Cx state policy is completely - * customizable and can be altered dynamically. - */ - - /* startup state */ - for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { - cx = &pr->power.states[i]; - if (!cx->valid) - continue; - - if (!state_is_set) - pr->power.state = cx; - state_is_set++; - break; - } - - if (!state_is_set) - return -ENODEV; - - /* demotion */ - for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { - cx = &pr->power.states[i]; - if (!cx->valid) - continue; - - if (lower) { - cx->demotion.state = lower; - cx->demotion.threshold.ticks = cx->latency_ticks; - cx->demotion.threshold.count = 1; - if (cx->type == ACPI_STATE_C3) - cx->demotion.threshold.bm = bm_history; - } - - lower = cx; - } - - /* promotion */ - for (i = (ACPI_PROCESSOR_MAX_POWER - 1); i > 0; i--) { - cx = &pr->power.states[i]; - if (!cx->valid) - continue; - - if (higher) { - cx->promotion.state = higher; - cx->promotion.threshold.ticks = cx->latency_ticks; - if (cx->type >= ACPI_STATE_C2) - cx->promotion.threshold.count = 4; - else - cx->promotion.threshold.count = 10; - if (higher->type == ACPI_STATE_C3) - cx->promotion.threshold.bm = bm_history; - } - - higher = cx; - } - - return 0; -} -#endif /* !CONFIG_CPU_IDLE */ - static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) { @@ -1047,11 +541,7 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) */ cx->valid = 1; -#ifndef CONFIG_CPU_IDLE - cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency); -#else cx->latency_ticks = cx->latency; -#endif return; } @@ -1121,7 +611,6 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr, " for C3 to be enabled on SMP systems\n")); return; } - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); } /* @@ -1132,11 +621,16 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr, */ cx->valid = 1; -#ifndef CONFIG_CPU_IDLE - cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency); -#else cx->latency_ticks = cx->latency; -#endif + /* + * On older chipsets, BM_RLD needs to be set + * in order for Bus Master activity to wake the + * system from C3. Newer chipsets handle DMA + * during C3 automatically and BM_RLD is a NOP. + * In either case, the proper way to + * handle BM_RLD is to set it and leave it set. + */ + acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1); return; } @@ -1201,20 +695,6 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr) pr->power.count = acpi_processor_power_verify(pr); -#ifndef CONFIG_CPU_IDLE - /* - * Set Default Policy - * ------------------ - * Now that we know which states are supported, set the default - * policy. Note that this policy can be changed dynamically - * (e.g. encourage deeper sleeps to conserve battery life when - * not on AC). - */ - result = acpi_processor_set_power_policy(pr); - if (result) - return result; -#endif - /* * if one state of type C2 or C3 is available, mark this * CPU as being "idle manageable" @@ -1312,69 +792,6 @@ static const struct file_operations acpi_processor_power_fops = { .release = single_release, }; -#ifndef CONFIG_CPU_IDLE - -int acpi_processor_cst_has_changed(struct acpi_processor *pr) -{ - int result = 0; - - if (boot_option_idle_override) - return 0; - - if (!pr) - return -EINVAL; - - if (nocst) { - return -ENODEV; - } - - if (!pr->flags.power_setup_done) - return -ENODEV; - - /* - * Fall back to the default idle loop, when pm_idle_save had - * been initialized. - */ - if (pm_idle_save) { - pm_idle = pm_idle_save; - /* Relies on interrupts forcing exit from idle. */ - synchronize_sched(); - } - - pr->flags.power = 0; - result = acpi_processor_get_power_info(pr); - if ((pr->flags.power == 1) && (pr->flags.power_setup_done)) - pm_idle = acpi_processor_idle; - - return result; -} - -#ifdef CONFIG_SMP -static void smp_callback(void *v) -{ - /* we already woke the CPU up, nothing more to do */ -} - -/* - * This function gets called when a part of the kernel has a new latency - * requirement. This means we need to get all processors out of their C-state, - * and then recalculate a new suitable C-state. Just do a cross-cpu IPI; that - * wakes them all right up. - */ -static int acpi_processor_latency_notify(struct notifier_block *b, - unsigned long l, void *v) -{ - smp_call_function(smp_callback, NULL, 1); - return NOTIFY_OK; -} - -static struct notifier_block acpi_processor_latency_notifier = { - .notifier_call = acpi_processor_latency_notify, -}; - -#endif - -#else /* CONFIG_CPU_IDLE */ /** * acpi_idle_bm_check - checks if bus master activity was detected @@ -1383,7 +800,7 @@ static int acpi_idle_bm_check(void) { u32 bm_status = 0; - acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); + acpi_get_register_unlocked(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); if (bm_status) acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1); /* @@ -1400,25 +817,6 @@ static int acpi_idle_bm_check(void) } /** - * acpi_idle_update_bm_rld - updates the BM_RLD bit depending on target state - * @pr: the processor - * @target: the new target state - */ -static inline void acpi_idle_update_bm_rld(struct acpi_processor *pr, - struct acpi_processor_cx *target) -{ - if (pr->flags.bm_rld_set && target->type != ACPI_STATE_C3) { - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - pr->flags.bm_rld_set = 0; - } - - if (!pr->flags.bm_rld_set && target->type == ACPI_STATE_C3) { - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1); - pr->flags.bm_rld_set = 1; - } -} - -/** * acpi_idle_do_entry - a helper function that does C2 and C3 type entry * @cx: cstate data * @@ -1473,9 +871,6 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, return 0; } - if (pr->flags.bm_check) - acpi_idle_update_bm_rld(pr, cx); - t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); acpi_idle_do_entry(cx); t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); @@ -1527,9 +922,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, */ acpi_state_timer_broadcast(pr, cx, 1); - if (pr->flags.bm_check) - acpi_idle_update_bm_rld(pr, cx); - if (cx->type == ACPI_STATE_C3) ACPI_FLUSH_CPU_CACHE(); @@ -1621,8 +1013,6 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, */ acpi_state_timer_broadcast(pr, cx, 1); - acpi_idle_update_bm_rld(pr, cx); - /* * disable bus master * bm_check implies we need ARB_DIS @@ -1795,8 +1185,6 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) return ret; } -#endif /* CONFIG_CPU_IDLE */ - int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *device) { @@ -1825,10 +1213,6 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, "ACPI: processor limited to max C-state %d\n", max_cstate); first_run++; -#if !defined(CONFIG_CPU_IDLE) && defined(CONFIG_SMP) - pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY, - &acpi_processor_latency_notifier); -#endif } if (!pr) @@ -1852,11 +1236,9 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, * platforms that only support C1. */ if (pr->flags.power) { -#ifdef CONFIG_CPU_IDLE acpi_processor_setup_cpuidle(pr); if (cpuidle_register_device(&pr->power.dev)) return -EIO; -#endif printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id); for (i = 1; i <= pr->power.count; i++) @@ -1864,13 +1246,6 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, printk(" C%d[C%d]", i, pr->power.states[i].type); printk(")\n"); - -#ifndef CONFIG_CPU_IDLE - if (pr->id == 0) { - pm_idle_save = pm_idle; - pm_idle = acpi_processor_idle; - } -#endif } /* 'power' [R] */ @@ -1889,34 +1264,12 @@ int acpi_processor_power_exit(struct acpi_processor *pr, if (boot_option_idle_override) return 0; -#ifdef CONFIG_CPU_IDLE cpuidle_unregister_device(&pr->power.dev); -#endif pr->flags.power_setup_done = 0; if (acpi_device_dir(device)) remove_proc_entry(ACPI_PROCESSOR_FILE_POWER, acpi_device_dir(device)); -#ifndef CONFIG_CPU_IDLE - - /* Unregister the idle handler when processor #0 is removed. */ - if (pr->id == 0) { - if (pm_idle_save) - pm_idle = pm_idle_save; - - /* - * We are about to unload the current idle thread pm callback - * (pm_idle), Wait for all processors to update cached/local - * copies of pm_idle before proceeding. - */ - cpu_idle_wait(); -#ifdef CONFIG_SMP - pm_qos_remove_notifier(PM_QOS_CPU_DMA_LATENCY, - &acpi_processor_latency_notifier); -#endif - } -#endif - return 0; } diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 846e227..9cc769b 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -31,14 +31,6 @@ #include <linux/init.h> #include <linux/cpufreq.h> -#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/mutex.h> - -#include <asm/uaccess.h> -#endif - #ifdef CONFIG_X86 #include <asm/cpufeature.h> #endif @@ -434,96 +426,6 @@ int acpi_processor_notify_smm(struct module *calling_module) EXPORT_SYMBOL(acpi_processor_notify_smm); -#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF -/* /proc/acpi/processor/../performance interface (DEPRECATED) */ - -static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file); -static struct file_operations acpi_processor_perf_fops = { - .owner = THIS_MODULE, - .open = acpi_processor_perf_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_processor *pr = seq->private; - int i; - - - if (!pr) - goto end; - - if (!pr->performance) { - seq_puts(seq, "<not supported>\n"); - goto end; - } - - seq_printf(seq, "state count: %d\n" - "active state: P%d\n", - pr->performance->state_count, pr->performance->state); - - seq_puts(seq, "states:\n"); - for (i = 0; i < pr->performance->state_count; i++) - seq_printf(seq, - " %cP%d: %d MHz, %d mW, %d uS\n", - (i == pr->performance->state ? '*' : ' '), i, - (u32) pr->performance->states[i].core_frequency, - (u32) pr->performance->states[i].power, - (u32) pr->performance->states[i].transition_latency); - - end: - return 0; -} - -static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_processor_perf_seq_show, - PDE(inode)->data); -} - -static void acpi_cpufreq_add_file(struct acpi_processor *pr) -{ - struct acpi_device *device = NULL; - - - if (acpi_bus_get_device(pr->handle, &device)) - return; - - /* add file 'performance' [R/W] */ - proc_create_data(ACPI_PROCESSOR_FILE_PERFORMANCE, S_IFREG | S_IRUGO, - acpi_device_dir(device), - &acpi_processor_perf_fops, acpi_driver_data(device)); - return; -} - -static void acpi_cpufreq_remove_file(struct acpi_processor *pr) -{ - struct acpi_device *device = NULL; - - - if (acpi_bus_get_device(pr->handle, &device)) - return; - - /* remove file 'performance' */ - remove_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE, - acpi_device_dir(device)); - - return; -} - -#else -static void acpi_cpufreq_add_file(struct acpi_processor *pr) -{ - return; -} -static void acpi_cpufreq_remove_file(struct acpi_processor *pr) -{ - return; -} -#endif /* CONFIG_X86_ACPI_CPUFREQ_PROC_INTF */ - static int acpi_processor_get_psd(struct acpi_processor *pr) { int result = 0; @@ -747,14 +649,12 @@ err_ret: } EXPORT_SYMBOL(acpi_processor_preregister_performance); - int acpi_processor_register_performance(struct acpi_processor_performance *performance, unsigned int cpu) { struct acpi_processor *pr; - if (!(acpi_processor_ppc_status & PPC_REGISTERED)) return -EINVAL; @@ -781,8 +681,6 @@ acpi_processor_register_performance(struct acpi_processor_performance return -EIO; } - acpi_cpufreq_add_file(pr); - mutex_unlock(&performance_mutex); return 0; } @@ -795,7 +693,6 @@ acpi_processor_unregister_performance(struct acpi_processor_performance { struct acpi_processor *pr; - mutex_lock(&performance_mutex); pr = per_cpu(processors, cpu); @@ -808,8 +705,6 @@ acpi_processor_unregister_performance(struct acpi_processor_performance kfree(pr->performance->states); pr->performance = NULL; - acpi_cpufreq_remove_file(pr); - mutex_unlock(&performance_mutex); return; diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 7e3c609..5192666 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -90,31 +90,6 @@ void __init acpi_old_suspend_ordering(void) old_suspend_ordering = true; } -/* - * According to the ACPI specification the BIOS should make sure that ACPI is - * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, - * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI - * on such systems during resume. Unfortunately that doesn't help in - * particularly pathological cases in which SCI_EN has to be set directly on - * resume, although the specification states very clearly that this flag is - * owned by the hardware. The set_sci_en_on_resume variable will be set in such - * cases. - */ -static bool set_sci_en_on_resume; -/* - * The ACPI specification wants us to save NVS memory regions during hibernation - * and to restore them during the subsequent resume. However, it is not certain - * if this mechanism is going to work on all machines, so we allow the user to - * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line - * option. - */ -static bool s4_no_nvs; - -void __init acpi_s4_no_nvs(void) -{ - s4_no_nvs = true; -} - /** * acpi_pm_disable_gpes - Disable the GPEs. */ @@ -193,6 +168,18 @@ static void acpi_pm_end(void) #endif /* CONFIG_ACPI_SLEEP */ #ifdef CONFIG_SUSPEND +/* + * According to the ACPI specification the BIOS should make sure that ACPI is + * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, + * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI + * on such systems during resume. Unfortunately that doesn't help in + * particularly pathological cases in which SCI_EN has to be set directly on + * resume, although the specification states very clearly that this flag is + * owned by the hardware. The set_sci_en_on_resume variable will be set in such + * cases. + */ +static bool set_sci_en_on_resume; + extern void do_suspend_lowlevel(void); static u32 acpi_suspend_states[] = { @@ -396,6 +383,20 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { #endif /* CONFIG_SUSPEND */ #ifdef CONFIG_HIBERNATION +/* + * The ACPI specification wants us to save NVS memory regions during hibernation + * and to restore them during the subsequent resume. However, it is not certain + * if this mechanism is going to work on all machines, so we allow the user to + * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line + * option. + */ +static bool s4_no_nvs; + +void __init acpi_s4_no_nvs(void) +{ + s4_no_nvs = true; +} + static unsigned long s4_hardware_signature; static struct acpi_table_facs *facs; static bool nosigcheck; @@ -679,7 +680,7 @@ static void acpi_power_off_prepare(void) static void acpi_power_off(void) { /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ - printk("%s called\n", __func__); + printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); acpi_enable_wakeup_device(ACPI_STATE_S5); acpi_enter_sleep_state(ACPI_STATE_S5); diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index 775c97a..a885295 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -293,7 +293,12 @@ static void __init check_multiple_madt(void) int __init acpi_table_init(void) { - acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0); + acpi_status status; + + status = acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0); + if (ACPI_FAILURE(status)) + return 1; + check_multiple_madt(); return 0; } diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index f261737..bb5ed05 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1020,7 +1020,7 @@ acpi_video_device_brightness_seq_show(struct seq_file *seq, void *offset) } seq_printf(seq, "levels: "); - for (i = 0; i < dev->brightness->count; i++) + for (i = 2; i < dev->brightness->count; i++) seq_printf(seq, " %d", dev->brightness->levels[i]); seq_printf(seq, "\ncurrent: %d\n", dev->brightness->curr); @@ -1059,7 +1059,7 @@ acpi_video_device_write_brightness(struct file *file, return -EFAULT; /* validate through the list of available levels */ - for (i = 0; i < dev->brightness->count; i++) + for (i = 2; i < dev->brightness->count; i++) if (level == dev->brightness->levels[i]) { if (ACPI_SUCCESS (acpi_video_device_lcd_set_level(dev, level))) @@ -1260,7 +1260,7 @@ static int acpi_video_bus_POST_info_seq_show(struct seq_file *seq, void *offset) printk(KERN_WARNING PREFIX "This indicates a BIOS bug. Please contact the manufacturer.\n"); } - printk("%llx\n", options); + printk(KERN_WARNING "%llx\n", options); seq_printf(seq, "can POST: <integrated video>"); if (options & 2) seq_printf(seq, " <PCI video>"); @@ -1712,7 +1712,7 @@ acpi_video_get_next_level(struct acpi_video_device *device, max = max_below = 0; min = min_above = 255; /* Find closest level to level_current */ - for (i = 0; i < device->brightness->count; i++) { + for (i = 2; i < device->brightness->count; i++) { l = device->brightness->levels[i]; if (abs(l - level_current) < abs(delta)) { delta = l - level_current; @@ -1722,7 +1722,7 @@ acpi_video_get_next_level(struct acpi_video_device *device, } /* Ajust level_current to closest available level */ level_current += delta; - for (i = 0; i < device->brightness->count; i++) { + for (i = 2; i < device->brightness->count; i++) { l = device->brightness->levels[i]; if (l < min) min = l; @@ -2006,6 +2006,12 @@ static int acpi_video_bus_add(struct acpi_device *device) device->pnp.bus_id[3] = '0' + instance; instance ++; } + /* a hack to fix the duplicate name "VGA" problem on Pa 3553 */ + if (!strcmp(device->pnp.bus_id, "VGA")) { + if (instance) + device->pnp.bus_id[3] = '0' + instance; + instance++; + } video->device = device; strcpy(acpi_device_name(device), ACPI_VIDEO_BUS_NAME); diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 77bba4c..a603bbf 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -61,9 +61,14 @@ #define EM_MSG_LED_VALUE_ON 0x00010000 static int ahci_skip_host_reset; +static int ahci_ignore_sss; + module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); +module_param_named(ignore_sss, ahci_ignore_sss, int, 0444); +MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)"); + static int ahci_enable_alpm(struct ata_port *ap, enum link_pm policy); static void ahci_disable_alpm(struct ata_port *ap); @@ -2692,8 +2697,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) host->iomap = pcim_iomap_table(pdev); host->private_data = hpriv; - if (!(hpriv->cap & HOST_CAP_SSS)) + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) host->flags |= ATA_HOST_PARALLEL_SCAN; + else + printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); if (pi.flags & ATA_FLAG_EM) ahci_reset_em(host); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 88c2428..9fbf059 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -164,6 +164,11 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +static bool ata_sstatus_online(u32 sstatus) +{ + return (sstatus & 0xf) == 0x3; +} + /** * ata_link_next - link iteration helper * @link: the previous link, NULL to start @@ -1015,18 +1020,6 @@ static const char *sata_spd_string(unsigned int spd) return spd_str[spd - 1]; } -void ata_dev_disable(struct ata_device *dev) -{ - if (ata_dev_enabled(dev)) { - if (ata_msg_drv(dev->link->ap)) - ata_dev_printk(dev, KERN_WARNING, "disabled\n"); - ata_acpi_on_disable(dev); - ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | - ATA_DNXFER_QUIET); - dev->class++; - } -} - static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy) { struct ata_link *link = dev->link; @@ -2239,6 +2232,40 @@ retry: return rc; } +static int ata_do_link_spd_horkage(struct ata_device *dev) +{ + struct ata_link *plink = ata_dev_phys_link(dev); + u32 target, target_limit; + + if (!sata_scr_valid(plink)) + return 0; + + if (dev->horkage & ATA_HORKAGE_1_5_GBPS) + target = 1; + else + return 0; + + target_limit = (1 << target) - 1; + + /* if already on stricter limit, no need to push further */ + if (plink->sata_spd_limit <= target_limit) + return 0; + + plink->sata_spd_limit = target_limit; + + /* Request another EH round by returning -EAGAIN if link is + * going faster than the target speed. Forward progress is + * guaranteed by setting sata_spd_limit to target_limit above. + */ + if (plink->sata_spd > target) { + ata_dev_printk(dev, KERN_INFO, + "applying link speed limit horkage to %s\n", + sata_spd_string(target)); + return -EAGAIN; + } + return 0; +} + static inline u8 ata_dev_knobble(struct ata_device *dev) { struct ata_port *ap = dev->link->ap; @@ -2329,6 +2356,10 @@ int ata_dev_configure(struct ata_device *dev) return 0; } + rc = ata_do_link_spd_horkage(dev); + if (rc) + return rc; + /* let ACPI work its magic */ rc = ata_acpi_on_devcfg(dev); if (rc) @@ -2784,7 +2815,7 @@ int ata_bus_probe(struct ata_port *ap) /* This is the last chance, better to slow * down than lose it. */ - sata_down_spd_limit(&ap->link); + sata_down_spd_limit(&ap->link, 0); ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); } } @@ -2880,21 +2911,27 @@ void ata_port_disable(struct ata_port *ap) /** * sata_down_spd_limit - adjust SATA spd limit downward * @link: Link to adjust SATA spd limit for + * @spd_limit: Additional limit * * Adjust SATA spd limit of @link downward. Note that this * function only adjusts the limit. The change must be applied * using sata_set_spd(). * + * If @spd_limit is non-zero, the speed is limited to equal to or + * lower than @spd_limit if such speed is supported. If + * @spd_limit is slower than any supported speed, only the lowest + * supported speed is allowed. + * * LOCKING: * Inherited from caller. * * RETURNS: * 0 on success, negative errno on failure */ -int sata_down_spd_limit(struct ata_link *link) +int sata_down_spd_limit(struct ata_link *link, u32 spd_limit) { u32 sstatus, spd, mask; - int rc, highbit; + int rc, bit; if (!sata_scr_valid(link)) return -EOPNOTSUPP; @@ -2903,7 +2940,7 @@ int sata_down_spd_limit(struct ata_link *link) * If not, use cached value in link->sata_spd. */ rc = sata_scr_read(link, SCR_STATUS, &sstatus); - if (rc == 0) + if (rc == 0 && ata_sstatus_online(sstatus)) spd = (sstatus >> 4) & 0xf; else spd = link->sata_spd; @@ -2913,8 +2950,8 @@ int sata_down_spd_limit(struct ata_link *link) return -EINVAL; /* unconditionally mask off the highest bit */ - highbit = fls(mask) - 1; - mask &= ~(1 << highbit); + bit = fls(mask) - 1; + mask &= ~(1 << bit); /* Mask off all speeds higher than or equal to the current * one. Force 1.5Gbps if current SPD is not available. @@ -2928,6 +2965,15 @@ int sata_down_spd_limit(struct ata_link *link) if (!mask) return -EINVAL; + if (spd_limit) { + if (mask & ((1 << spd_limit) - 1)) + mask &= (1 << spd_limit) - 1; + else { + bit = ffs(mask) - 1; + mask = 1 << bit; + } + } + link->sata_spd_limit = mask; ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n", @@ -4215,6 +4261,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + /* Devices which aren't very happy with higher link speeds */ + { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, + /* End Marker */ { } }; @@ -4709,8 +4758,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_qc_new - Request an available ATA command, for queueing - * @ap: Port associated with device @dev - * @dev: Device from whom we request an available command structure + * @ap: target port * * LOCKING: * None. @@ -5175,7 +5223,7 @@ bool ata_phys_link_online(struct ata_link *link) u32 sstatus; if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && - (sstatus & 0xf) == 0x3) + ata_sstatus_online(sstatus)) return true; return false; } @@ -5199,7 +5247,7 @@ bool ata_phys_link_offline(struct ata_link *link) u32 sstatus; if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && - (sstatus & 0xf) != 0x3) + !ata_sstatus_online(sstatus)) return true; return false; } @@ -5412,8 +5460,8 @@ void ata_dev_init(struct ata_device *dev) dev->horkage = 0; spin_unlock_irqrestore(ap->lock, flags); - memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, - sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); + memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0, + ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN); dev->pio_mask = UINT_MAX; dev->mwdma_mask = UINT_MAX; dev->udma_mask = UINT_MAX; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 8147a83..ce2ef04 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -82,6 +82,10 @@ enum { ATA_EH_FASTDRAIN_INTERVAL = 3000, ATA_EH_UA_TRIES = 5, + + /* probe speed down parameters, see ata_eh_schedule_probe() */ + ATA_EH_PROBE_TRIAL_INTERVAL = 60000, /* 1 min */ + ATA_EH_PROBE_TRIALS = 2, }; /* The following table determines how we sequence resets. Each entry @@ -1176,6 +1180,32 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc) } /** + * ata_dev_disable - disable ATA device + * @dev: ATA device to disable + * + * Disable @dev. + * + * Locking: + * EH context. + */ +void ata_dev_disable(struct ata_device *dev) +{ + if (!ata_dev_enabled(dev)) + return; + + if (ata_msg_drv(dev->link->ap)) + ata_dev_printk(dev, KERN_WARNING, "disabled\n"); + ata_acpi_on_disable(dev); + ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET); + dev->class++; + + /* From now till the next successful probe, ering is used to + * track probe failures. Clear accumulated device error info. + */ + ata_ering_clear(&dev->ering); +} + +/** * ata_eh_detach_dev - detach ATA device * @dev: ATA device to detach * @@ -1849,7 +1879,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, /* speed down? */ if (verdict & ATA_EH_SPDN_SPEED_DOWN) { /* speed down SATA link speed if possible */ - if (sata_down_spd_limit(link) == 0) { + if (sata_down_spd_limit(link, 0) == 0) { action |= ATA_EH_RESET; goto done; } @@ -2601,11 +2631,11 @@ int ata_eh_reset(struct ata_link *link, int classify, } if (try == max_tries - 1) { - sata_down_spd_limit(link); + sata_down_spd_limit(link, 0); if (slave) - sata_down_spd_limit(slave); + sata_down_spd_limit(slave, 0); } else if (rc == -EPIPE) - sata_down_spd_limit(failed_link); + sata_down_spd_limit(failed_link, 0); if (hardreset) reset = hardreset; @@ -2744,6 +2774,8 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, readid_flags, dev->id); switch (rc) { case 0: + /* clear error info accumulated during probe */ + ata_ering_clear(&dev->ering); new_mask |= 1 << dev->devno; break; case -ENOENT: @@ -2947,9 +2979,24 @@ static int ata_eh_skip_recovery(struct ata_link *link) return 1; } +static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg) +{ + u64 interval = msecs_to_jiffies(ATA_EH_PROBE_TRIAL_INTERVAL); + u64 now = get_jiffies_64(); + int *trials = void_arg; + + if (ent->timestamp < now - min(now, interval)) + return -1; + + (*trials)++; + return 0; +} + static int ata_eh_schedule_probe(struct ata_device *dev) { struct ata_eh_context *ehc = &dev->link->eh_context; + struct ata_link *link = ata_dev_phys_link(dev); + int trials = 0; if (!(ehc->i.probe_mask & (1 << dev->devno)) || (ehc->did_probe_mask & (1 << dev->devno))) @@ -2962,6 +3009,25 @@ static int ata_eh_schedule_probe(struct ata_device *dev) ehc->saved_xfer_mode[dev->devno] = 0; ehc->saved_ncq_enabled &= ~(1 << dev->devno); + /* Record and count probe trials on the ering. The specific + * error mask used is irrelevant. Because a successful device + * detection clears the ering, this count accumulates only if + * there are consecutive failed probes. + * + * If the count is equal to or higher than ATA_EH_PROBE_TRIALS + * in the last ATA_EH_PROBE_TRIAL_INTERVAL, link speed is + * forced to 1.5Gbps. + * + * This is to work around cases where failed link speed + * negotiation results in device misdetection leading to + * infinite DEVXCHG or PHRDY CHG events. + */ + ata_ering_record(&dev->ering, 0, AC_ERR_OTHER); + ata_ering_map(&dev->ering, ata_count_probe_trials_cb, &trials); + + if (trials > ATA_EH_PROBE_TRIALS) + sata_down_spd_limit(link, 1); + return 1; } @@ -2969,7 +3035,11 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) { struct ata_eh_context *ehc = &dev->link->eh_context; - ehc->tries[dev->devno]--; + /* -EAGAIN from EH routine indicates retry without prejudice. + * The requester is responsible for ensuring forward progress. + */ + if (err != -EAGAIN) + ehc->tries[dev->devno]--; switch (err) { case -ENODEV: @@ -2979,12 +3049,13 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) /* give it just one more chance */ ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1); case -EIO: - if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) { + if (ehc->tries[dev->devno] == 1) { /* This is the last chance, better to slow * down than lose it. */ - sata_down_spd_limit(ata_dev_phys_link(dev)); - ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); + sata_down_spd_limit(ata_dev_phys_link(dev), 0); + if (dev->pio_mode > XFER_PIO_0) + ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); } } diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 98ca07a..619f2c3 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -729,7 +729,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap, if (tries) { /* consecutive revalidation failures? speed down */ if (reval_failed) - sata_down_spd_limit(link); + sata_down_spd_limit(link, 0); else reval_failed = 1; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 3c4c5ae..b9747fa 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -415,6 +415,7 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, /** * ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl + * @ap: target port * @sdev: SCSI device to get identify data for * @arg: User buffer area for identify data * diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 0b299b0..714cb04 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -773,18 +773,32 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, else iowrite32_rep(data_addr, buf, words); + /* Transfer trailing bytes, if any */ if (unlikely(slop)) { - __le32 pad; + unsigned char pad[4]; + + /* Point buf to the tail of buffer */ + buf += buflen - slop; + + /* + * Use io*_rep() accessors here as well to avoid pointlessly + * swapping bytes to and fro on the big endian machines... + */ if (rw == READ) { - pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); - memcpy(buf + buflen - slop, &pad, slop); + if (slop < 3) + ioread16_rep(data_addr, pad, 1); + else + ioread32_rep(data_addr, pad, 1); + memcpy(buf, pad, slop); } else { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); + memcpy(pad, buf, slop); + if (slop < 3) + iowrite16_rep(data_addr, pad, 1); + else + iowrite32_rep(data_addr, pad, 1); } - words++; } - return words << 2; + return (buflen + 1) & ~1; } EXPORT_SYMBOL_GPL(ata_sff_data_xfer32); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index fe2839e..cea8014 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -79,7 +79,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, unsigned int tag); extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev); -extern void ata_dev_disable(struct ata_device *dev); extern void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay); extern void ata_port_flush_task(struct ata_port *ap); @@ -100,7 +99,7 @@ extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags); extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, unsigned int readid_flags); extern int ata_dev_configure(struct ata_device *dev); -extern int sata_down_spd_limit(struct ata_link *link); +extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); @@ -160,6 +159,7 @@ extern void ata_scsi_error(struct Scsi_Host *host); extern void ata_port_wait_eh(struct ata_port *ap); extern void ata_eh_fastdrain_timerfn(unsigned long arg); extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); +extern void ata_dev_disable(struct ata_device *dev); extern void ata_eh_detach_dev(struct ata_device *dev); extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev, unsigned int action); diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 3080f37..f1b26f7 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -12,7 +12,7 @@ * * Probe code based on drivers/ide/legacy/qd65xx.c * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by - * Samuel Thibault <samuel.thibault@fnac.net> + * Samuel Thibault <samuel.thibault@ens-lyon.org> */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 79a6c9a..ba556d3 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -110,7 +110,8 @@ static const struct via_isa_bridge { { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, - { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES}, + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, @@ -593,6 +594,7 @@ static int via_reinit_one(struct pci_dev *pdev) #endif static const struct pci_device_id via[] = { + { PCI_VDEVICE(VIA, 0x0415), }, { PCI_VDEVICE(VIA, 0x0571), }, { PCI_VDEVICE(VIA, 0x0581), }, { PCI_VDEVICE(VIA, 0x1571), }, diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index f2d8a020..4ae1a41 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -663,8 +663,8 @@ static const struct pci_device_id mv_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x5081), chip_508x }, /* RocketRAID 1720/174x have different identifiers */ { PCI_VDEVICE(TTI, 0x1720), chip_6042 }, - { PCI_VDEVICE(TTI, 0x1740), chip_508x }, - { PCI_VDEVICE(TTI, 0x1742), chip_508x }, + { PCI_VDEVICE(TTI, 0x1740), chip_6042 }, + { PCI_VDEVICE(TTI, 0x1742), chip_6042 }, { PCI_VDEVICE(MARVELL, 0x6040), chip_604x }, { PCI_VDEVICE(MARVELL, 0x6041), chip_604x }, diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index c49ad0e..55a8eed 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -421,26 +421,33 @@ static struct ata_port_operations nv_generic_ops = { .hardreset = ATA_OP_NULL, }; -/* OSDL bz3352 reports that nf2/3 controllers can't determine device - * signature reliably. Also, the following thread reports detection - * failure on cold boot with the standard debouncing timing. +/* nf2 is ripe with hardreset related problems. + * + * kernel bz#3352 reports nf2/3 controllers can't determine device + * signature reliably. The following thread reports detection failure + * on cold boot with the standard debouncing timing. * * http://thread.gmane.org/gmane.linux.ide/34098 * - * Debounce with hotplug timing and request follow-up SRST. + * And bz#12176 reports that hardreset simply doesn't work on nf2. + * Give up on it and just don't do hardreset. */ static struct ata_port_operations nv_nf2_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_generic_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, - .hardreset = nv_noclassify_hardreset, }; -/* CK804 finally gets hardreset right */ +/* For initial probing after boot and hot plugging, hardreset mostly + * works fine on CK804 but curiously, reprobing on the initial port by + * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS + * in somewhat undeterministic way. Use noclassify hardreset. + */ static struct ata_port_operations nv_ck804_ops = { .inherits = &nv_common_ops, .freeze = nv_ck804_freeze, .thaw = nv_ck804_thaw, + .hardreset = nv_noclassify_hardreset, .host_stop = nv_ck804_host_stop, }; diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 9f02959..d009160 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -324,7 +324,7 @@ static void sil_fill_sg(struct ata_queued_cmd *qc) prd->addr = cpu_to_le32(addr); prd->flags_len = cpu_to_le32(sg_len); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len); last_prd = prd; prd++; diff --git a/drivers/base/base.h b/drivers/base/base.h index 0a5f055..9f50f1b 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -88,8 +88,6 @@ extern void driver_detach(struct device_driver *drv); extern int driver_probe_device(struct device_driver *drv, struct device *dev); extern void sysdev_shutdown(void); -extern int sysdev_suspend(pm_message_t state); -extern int sysdev_resume(void); extern char *make_class_name(const char *name, struct kobject *kobj); diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 315bed8..1352312 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -18,9 +18,11 @@ */ #include <linux/device.h> +#include <linux/delay.h> #include <linux/module.h> #include <linux/kthread.h> #include <linux/wait.h> +#include <linux/async.h> #include "base.h" #include "power/power.h" @@ -168,6 +170,21 @@ int driver_probe_done(void) } /** + * wait_for_device_probe + * Wait for device probing to be completed. + * + * Note: this function polls at 100 msec intervals. + */ +int wait_for_device_probe(void) +{ + /* wait for the known devices to complete their probing */ + while (driver_probe_done() != 0) + msleep(100); + async_synchronize_full(); + return 0; +} + +/** * driver_probe_device - attempt to bind device & driver together * @drv: driver to bind a device to * @dev: device to try to bind to the driver diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 670c9d6..2d14f4a 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -333,7 +333,6 @@ static void dpm_power_up(pm_message_t state) */ void device_power_up(pm_message_t state) { - sysdev_resume(); dpm_power_up(state); } EXPORT_SYMBOL_GPL(device_power_up); @@ -577,8 +576,6 @@ int device_power_down(pm_message_t state) } dev->power.status = DPM_OFF_IRQ; } - if (!error) - error = sysdev_suspend(state); if (error) dpm_power_up(resume_event(state)); return error; diff --git a/drivers/base/sys.c b/drivers/base/sys.c index c98c31e..b428c8c 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -303,7 +303,6 @@ void sysdev_unregister(struct sys_device * sysdev) * is guaranteed by virtue of the fact that child devices are registered * after their parents. */ - void sysdev_shutdown(void) { struct sysdev_class * cls; @@ -363,7 +362,6 @@ static void __sysdev_resume(struct sys_device *dev) * This is only called by the device PM core, so we let them handle * all synchronization. */ - int sysdev_suspend(pm_message_t state) { struct sysdev_class * cls; @@ -432,7 +430,7 @@ aux_driver: } return ret; } - +EXPORT_SYMBOL_GPL(sysdev_suspend); /** * sysdev_resume - Bring system devices back to life. @@ -442,7 +440,6 @@ aux_driver: * * Note: Interrupts are disabled when called. */ - int sysdev_resume(void) { struct sysdev_class * cls; @@ -463,7 +460,7 @@ int sysdev_resume(void) } return 0; } - +EXPORT_SYMBOL_GPL(sysdev_resume); int __init system_bus_init(void) { diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h index c237527..5e41e6d 100644 --- a/drivers/block/aoe/aoe.h +++ b/drivers/block/aoe/aoe.h @@ -18,6 +18,7 @@ enum { AOECMD_ATA, AOECMD_CFG, + AOECMD_VEND_MIN = 0xf0, AOEFL_RSP = (1<<3), AOEFL_ERR = (1<<2), diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c index 30de5b1..c6099ba 100644 --- a/drivers/block/aoe/aoenet.c +++ b/drivers/block/aoe/aoenet.c @@ -142,6 +142,8 @@ aoenet_rcv(struct sk_buff *skb, struct net_device *ifp, struct packet_type *pt, aoecmd_cfg_rsp(skb); break; default: + if (h->cmd >= AOECMD_VEND_MIN) + break; /* don't complain about vendor commands */ printk(KERN_INFO "aoe: unknown cmd %d\n", h->cmd); } exit: diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 69e1df7..4234c11 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -1730,7 +1730,7 @@ static int __init fd_test_drive_present( int drive ) timeout = jiffies + 2*HZ+HZ/2; while (time_before(jiffies, timeout)) - if (!(mfp.par_dt_reg & 0x20)) + if (!(st_mfp.par_dt_reg & 0x20)) break; status = FDC_READ( FDCREG_STATUS ); @@ -1747,7 +1747,7 @@ static int __init fd_test_drive_present( int drive ) /* dummy seek command to make WP bit accessible */ FDC_WRITE( FDCREG_DATA, 0 ); FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK ); - while( mfp.par_dt_reg & 0x20 ) + while( st_mfp.par_dt_reg & 0x20 ) ; status = FDC_READ( FDCREG_STATUS ); } diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 01e6938..d2cb67b 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3390,6 +3390,203 @@ static void free_hba(int i) kfree(p); } +/* Send a message CDB to the firmware. */ +static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type) +{ + typedef struct { + CommandListHeader_struct CommandHeader; + RequestBlock_struct Request; + ErrDescriptor_struct ErrorDescriptor; + } Command; + static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct); + Command *cmd; + dma_addr_t paddr64; + uint32_t paddr32, tag; + void __iomem *vaddr; + int i, err; + + vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); + if (vaddr == NULL) + return -ENOMEM; + + /* The Inbound Post Queue only accepts 32-bit physical addresses for the + CCISS commands, so they must be allocated from the lower 4GiB of + memory. */ + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + iounmap(vaddr); + return -ENOMEM; + } + + cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); + if (cmd == NULL) { + iounmap(vaddr); + return -ENOMEM; + } + + /* This must fit, because of the 32-bit consistent DMA mask. Also, + although there's no guarantee, we assume that the address is at + least 4-byte aligned (most likely, it's page-aligned). */ + paddr32 = paddr64; + + cmd->CommandHeader.ReplyQueue = 0; + cmd->CommandHeader.SGList = 0; + cmd->CommandHeader.SGTotal = 0; + cmd->CommandHeader.Tag.lower = paddr32; + cmd->CommandHeader.Tag.upper = 0; + memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); + + cmd->Request.CDBLen = 16; + cmd->Request.Type.Type = TYPE_MSG; + cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE; + cmd->Request.Type.Direction = XFER_NONE; + cmd->Request.Timeout = 0; /* Don't time out */ + cmd->Request.CDB[0] = opcode; + cmd->Request.CDB[1] = type; + memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */ + + cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command); + cmd->ErrorDescriptor.Addr.upper = 0; + cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct); + + writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); + + for (i = 0; i < 10; i++) { + tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); + if ((tag & ~3) == paddr32) + break; + schedule_timeout_uninterruptible(HZ); + } + + iounmap(vaddr); + + /* we leak the DMA buffer here ... no choice since the controller could + still complete the command. */ + if (i == 10) { + printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n", + opcode, type); + return -ETIMEDOUT; + } + + pci_free_consistent(pdev, cmd_sz, cmd, paddr64); + + if (tag & 2) { + printk(KERN_ERR "cciss: controller message %02x:%02x failed\n", + opcode, type); + return -EIO; + } + + printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n", + opcode, type); + return 0; +} + +#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0) +#define cciss_noop(p) cciss_message(p, 3, 0) + +static __devinit int cciss_reset_msi(struct pci_dev *pdev) +{ +/* the #defines are stolen from drivers/pci/msi.h. */ +#define msi_control_reg(base) (base + PCI_MSI_FLAGS) +#define PCI_MSIX_FLAGS_ENABLE (1 << 15) + + int pos; + u16 control = 0; + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSI_FLAGS_ENABLE) { + printk(KERN_INFO "cciss: resetting MSI\n"); + pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE); + } + } + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSIX_FLAGS_ENABLE) { + printk(KERN_INFO "cciss: resetting MSI-X\n"); + pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE); + } + } + + return 0; +} + +/* This does a hard reset of the controller using PCI power management + * states. */ +static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev) +{ + u16 pmcsr, saved_config_space[32]; + int i, pos; + + printk(KERN_INFO "cciss: using PCI PM to reset controller\n"); + + /* This is very nearly the same thing as + + pci_save_state(pci_dev); + pci_set_power_state(pci_dev, PCI_D3hot); + pci_set_power_state(pci_dev, PCI_D0); + pci_restore_state(pci_dev); + + but we can't use these nice canned kernel routines on + kexec, because they also check the MSI/MSI-X state in PCI + configuration space and do the wrong thing when it is + set/cleared. Also, the pci_save/restore_state functions + violate the ordering requirements for restoring the + configuration space from the CCISS document (see the + comment below). So we roll our own .... */ + + for (i = 0; i < 32; i++) + pci_read_config_word(pdev, 2*i, &saved_config_space[i]); + + pos = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pos == 0) { + printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n"); + return -ENODEV; + } + + /* Quoting from the Open CISS Specification: "The Power + * Management Control/Status Register (CSR) controls the power + * state of the device. The normal operating state is D0, + * CSR=00h. The software off state is D3, CSR=03h. To reset + * the controller, place the interface device in D3 then to + * D0, this causes a secondary PCI reset which will reset the + * controller." */ + + /* enter the D3hot power management state */ + pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D3hot; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + schedule_timeout_uninterruptible(HZ >> 1); + + /* enter the D0 power management state */ + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D0; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + schedule_timeout_uninterruptible(HZ >> 1); + + /* Restore the PCI configuration space. The Open CISS + * Specification says, "Restore the PCI Configuration + * Registers, offsets 00h through 60h. It is important to + * restore the command register, 16-bits at offset 04h, + * last. Do not restore the configuration status register, + * 16-bits at offset 06h." Note that the offset is 2*i. */ + for (i = 0; i < 32; i++) { + if (i == 2 || i == 3) + continue; + pci_write_config_word(pdev, 2*i, saved_config_space[i]); + } + wmb(); + pci_write_config_word(pdev, 4, saved_config_space[2]); + + return 0; +} + /* * This is it. Find all the controllers and register them. I really hate * stealing all these major device numbers. @@ -3404,6 +3601,24 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, int dac, return_code; InquiryData_struct *inq_buff = NULL; + if (reset_devices) { + /* Reset the controller with a PCI power-cycle */ + if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev)) + return -ENODEV; + + /* Some devices (notably the HP Smart Array 5i Controller) + need a little pause here */ + schedule_timeout_uninterruptible(30*HZ); + + /* Now try to get the controller to respond to a no-op */ + for (i=0; i<12; i++) { + if (cciss_noop(pdev) == 0) + break; + else + printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : "")); + } + } + i = alloc_cciss_hba(); if (i < 0) return -1; diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index cf29cc4..83d8ed3 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -558,6 +558,8 @@ static void process_fd_request(void); static void recalibrate_floppy(void); static void floppy_shutdown(unsigned long); +static int floppy_request_regions(int); +static void floppy_release_regions(int); static int floppy_grab_irq_and_dma(void); static void floppy_release_irq_and_dma(void); @@ -4274,8 +4276,7 @@ static int __init floppy_init(void) FDCS->rawcmd = 2; if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) { /* free ioports reserved by floppy_grab_irq_and_dma() */ - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); + floppy_release_regions(fdc); FDCS->address = -1; FDCS->version = FDC_NONE; continue; @@ -4284,8 +4285,7 @@ static int __init floppy_init(void) FDCS->version = get_fdc_version(); if (FDCS->version == FDC_NONE) { /* free ioports reserved by floppy_grab_irq_and_dma() */ - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); + floppy_release_regions(fdc); FDCS->address = -1; continue; } @@ -4358,6 +4358,47 @@ out_put_disk: static DEFINE_SPINLOCK(floppy_usage_lock); +static const struct io_region { + int offset; + int size; +} io_regions[] = { + { 2, 1 }, + /* address + 3 is sometimes reserved by pnp bios for motherboard */ + { 4, 2 }, + /* address + 6 is reserved, and may be taken by IDE. + * Unfortunately, Adaptec doesn't know this :-(, */ + { 7, 1 }, +}; + +static void floppy_release_allocated_regions(int fdc, const struct io_region *p) +{ + while (p != io_regions) { + p--; + release_region(FDCS->address + p->offset, p->size); + } +} + +#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)])) + +static int floppy_request_regions(int fdc) +{ + const struct io_region *p; + + for (p = io_regions; p < ARRAY_END(io_regions); p++) { + if (!request_region(FDCS->address + p->offset, p->size, "floppy")) { + DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset); + floppy_release_allocated_regions(fdc, p); + return -EBUSY; + } + } + return 0; +} + +static void floppy_release_regions(int fdc) +{ + floppy_release_allocated_regions(fdc, ARRAY_END(io_regions)); +} + static int floppy_grab_irq_and_dma(void) { unsigned long flags; @@ -4399,18 +4440,8 @@ static int floppy_grab_irq_and_dma(void) for (fdc = 0; fdc < N_FDC; fdc++) { if (FDCS->address != -1) { - if (!request_region(FDCS->address + 2, 4, "floppy")) { - DPRINT("Floppy io-port 0x%04lx in use\n", - FDCS->address + 2); - goto cleanup1; - } - if (!request_region(FDCS->address + 7, 1, "floppy DIR")) { - DPRINT("Floppy io-port 0x%04lx in use\n", - FDCS->address + 7); - goto cleanup2; - } - /* address + 6 is reserved, and may be taken by IDE. - * Unfortunately, Adaptec doesn't know this :-(, */ + if (floppy_request_regions(fdc)) + goto cleanup; } } for (fdc = 0; fdc < N_FDC; fdc++) { @@ -4432,15 +4463,11 @@ static int floppy_grab_irq_and_dma(void) fdc = 0; irqdma_allocated = 1; return 0; -cleanup2: - release_region(FDCS->address + 2, 4); -cleanup1: +cleanup: fd_free_irq(); fd_free_dma(); - while (--fdc >= 0) { - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); - } + while (--fdc >= 0) + floppy_release_regions(fdc); spin_lock_irqsave(&floppy_usage_lock, flags); usage_count--; spin_unlock_irqrestore(&floppy_usage_lock, flags); @@ -4501,10 +4528,8 @@ static void floppy_release_irq_and_dma(void) #endif old_fdc = fdc; for (fdc = 0; fdc < N_FDC; fdc++) - if (FDCS->address != -1) { - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); - } + if (FDCS->address != -1) + floppy_release_regions(fdc); fdc = old_fdc; } diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 34f80fa..8299e2d 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -549,6 +549,15 @@ static void do_nbd_request(struct request_queue * q) BUG_ON(lo->magic != LO_MAGIC); + if (unlikely(!lo->sock)) { + printk(KERN_ERR "%s: Attempted send on closed socket\n", + lo->disk->disk_name); + req->errors++; + nbd_end_request(req); + spin_lock_irq(q->queue_lock); + continue; + } + spin_lock_irq(&lo->queue_lock); list_add_tail(&req->queuelist, &lo->waiting_queue); spin_unlock_irq(&lo->queue_lock); diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index 9dfa271..c397b3d 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -422,7 +422,7 @@ static void xs(char *buf, char *targ, int len) for (k = 0; k < len; k++) { char c = *buf++; - if (c != ' ' || c != l) + if (c != ' ' && c != l) l = *targ++ = c; } if (l == ' ') diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index f5be808..735bbe2 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -761,7 +761,7 @@ source "drivers/char/hw_random/Kconfig" config NVRAM tristate "/dev/nvram support" - depends on ATARI || X86 || ARM || GENERIC_NVRAM + depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM ---help--- If you say Y here and create a character special file /dev/nvram with major number 10 and minor number 144 using mknod ("man mknod"), diff --git a/drivers/char/scc.h b/drivers/char/scc.h index 93998f5..341b114 100644 --- a/drivers/char/scc.h +++ b/drivers/char/scc.h @@ -387,7 +387,7 @@ struct scc_port { /* The SCC needs 3.5 PCLK cycles recovery time between to register * accesses. PCLK runs with 8 MHz on an Atari, so this delay is 3.5 * * 125 ns = 437.5 ns. This is too short for udelay(). - * 10/16/95: A tstb mfp.par_dt_reg takes 600ns (sure?) and thus should be + * 10/16/95: A tstb st_mfp.par_dt_reg takes 600ns (sure?) and thus should be * quite right */ diff --git a/drivers/char/sx.c b/drivers/char/sx.c index b60be7b..518f2a2 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -1713,8 +1713,8 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, for (i = 0; i < SX_NBOARDS; i++) sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags); sx_dprintk(SX_DEBUG_FIRMWARE, "\n"); - unlock_kernel(); - return -EIO; + rc = -EIO; + goto out; } switch (cmd) { @@ -1746,8 +1746,10 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc); break; case SXIO_DO_RAMTEST: - if (sx_initialized) /* Already initialized: better not ramtest the board. */ - return -EPERM; + if (sx_initialized) { /* Already initialized: better not ramtest the board. */ + rc = -EPERM; + break; + } if (IS_SX_BOARD(board)) { rc = do_memtest(board, 0, 0x7000); if (!rc) @@ -1787,7 +1789,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, nbytes - i : SX_CHUNK_SIZE)) { kfree(tmp); rc = -EFAULT; - break; + goto out; } memcpy_toio(board->base2 + offset + i, tmp, (i + SX_CHUNK_SIZE > nbytes) ? @@ -1844,6 +1846,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, rc = -ENOTTY; break; } +out: unlock_kernel(); func_exit(); return rc; diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index 726ee8a..ecba494 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -4,7 +4,7 @@ * SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module * Specifications at www.trustedcomputinggroup.org * - * Copyright (C) 2005, Marcel Selhorst <selhorst@crypto.rub.de> + * Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com> * Sirrix AG - security technologies, http://www.sirrix.com and * Applied Data Security Group, Ruhr-University Bochum, Germany * Project-Homepage: http://www.prosec.rub.de/tpm @@ -636,7 +636,7 @@ static void __exit cleanup_inf(void) module_init(init_inf); module_exit(cleanup_inf); -MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>"); +MODULE_AUTHOR("Marcel Selhorst <m.selhorst@sirrix.com>"); MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2"); MODULE_VERSION("1.9"); MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 6a2b036..6f45b16 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -117,11 +117,7 @@ static inline cputime64_t get_cpu_idle_time_jiffy(unsigned int cpu, busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.irq); busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.softirq); busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.steal); - - if (!dbs_tuners_ins.ignore_nice) { - busy_time = cputime64_add(busy_time, - kstat_cpu(cpu).cpustat.nice); - } + busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.nice); idle_time = cputime64_sub(cur_wall_time, busy_time); if (wall) @@ -137,23 +133,6 @@ static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall) if (idle_time == -1ULL) return get_cpu_idle_time_jiffy(cpu, wall); - if (dbs_tuners_ins.ignore_nice) { - cputime64_t cur_nice; - unsigned long cur_nice_jiffies; - struct cpu_dbs_info_s *dbs_info; - - dbs_info = &per_cpu(cpu_dbs_info, cpu); - cur_nice = cputime64_sub(kstat_cpu(cpu).cpustat.nice, - dbs_info->prev_cpu_nice); - /* - * Assumption: nice time between sampling periods will be - * less than 2^32 jiffies for 32 bit sys - */ - cur_nice_jiffies = (unsigned long) - cputime64_to_jiffies64(cur_nice); - dbs_info->prev_cpu_nice = kstat_cpu(cpu).cpustat.nice; - return idle_time + jiffies_to_usecs(cur_nice_jiffies); - } return idle_time; } @@ -319,6 +298,9 @@ static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy, dbs_info = &per_cpu(cpu_dbs_info, j); dbs_info->prev_cpu_idle = get_cpu_idle_time(j, &dbs_info->prev_cpu_wall); + if (dbs_tuners_ins.ignore_nice) + dbs_info->prev_cpu_nice = kstat_cpu(j).cpustat.nice; + } mutex_unlock(&dbs_mutex); @@ -419,6 +401,23 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) j_dbs_info->prev_cpu_idle); j_dbs_info->prev_cpu_idle = cur_idle_time; + if (dbs_tuners_ins.ignore_nice) { + cputime64_t cur_nice; + unsigned long cur_nice_jiffies; + + cur_nice = cputime64_sub(kstat_cpu(j).cpustat.nice, + j_dbs_info->prev_cpu_nice); + /* + * Assumption: nice time between sampling periods will + * be less than 2^32 jiffies for 32 bit sys + */ + cur_nice_jiffies = (unsigned long) + cputime64_to_jiffies64(cur_nice); + + j_dbs_info->prev_cpu_nice = kstat_cpu(j).cpustat.nice; + idle_time += jiffies_to_usecs(cur_nice_jiffies); + } + if (unlikely(!wall_time || wall_time < idle_time)) continue; @@ -575,6 +574,10 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j, &j_dbs_info->prev_cpu_wall); + if (dbs_tuners_ins.ignore_nice) { + j_dbs_info->prev_cpu_nice = + kstat_cpu(j).cpustat.nice; + } } this_dbs_info->cpu = cpu; /* diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index a589930..280a9d2 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -518,6 +518,7 @@ struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, v dma_chan_name(chan), err); else break; + chan->private = NULL; chan = NULL; } } @@ -536,6 +537,7 @@ void dma_release_channel(struct dma_chan *chan) WARN_ONCE(chan->client_count != 1, "chan reference count %d != 1\n", chan->client_count); dma_chan_put(chan); + chan->private = NULL; mutex_unlock(&dma_list_mutex); } EXPORT_SYMBOL_GPL(dma_release_channel); diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 6b702cc..a97c07e 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -560,7 +560,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned long flags) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - struct dw_dma_slave *dws = dwc->dws; + struct dw_dma_slave *dws = chan->private; struct dw_desc *prev; struct dw_desc *first; u32 ctllo; @@ -790,7 +790,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) cfghi = DWC_CFGH_FIFO_MODE; cfglo = 0; - dws = dwc->dws; + dws = chan->private; if (dws) { /* * We need controller-specific data to set up slave @@ -866,7 +866,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan) spin_lock_bh(&dwc->lock); list_splice_init(&dwc->free_list, &list); dwc->descs_allocated = 0; - dwc->dws = NULL; /* Disable interrupts */ channel_clear_bit(dw, MASK.XFER, dwc->mask); diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index 00fdd18..b252b20 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -139,8 +139,6 @@ struct dw_dma_chan { struct list_head queue; struct list_head free_list; - struct dw_dma_slave *dws; - unsigned int descs_allocated; }; diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 7be2cf3..a5dd7a6 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -412,6 +412,7 @@ fw_card_add(struct fw_card *card, { u32 *config_rom; size_t length; + int err; card->max_receive = max_receive; card->link_speed = link_speed; @@ -422,7 +423,13 @@ fw_card_add(struct fw_card *card, list_add_tail(&card->link, &card_list); mutex_unlock(&card_mutex); - return card->driver->enable(card, config_rom, length); + err = card->driver->enable(card, config_rom, length); + if (err < 0) { + mutex_lock(&card_mutex); + list_del(&card->link); + mutex_unlock(&card_mutex); + } + return err; } EXPORT_SYMBOL(fw_card_add); diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c index 261b9aa..05aa2d4 100644 --- a/drivers/firmware/memmap.c +++ b/drivers/firmware/memmap.c @@ -1,7 +1,7 @@ /* * linux/drivers/firmware/memmap.c * Copyright (C) 2008 SUSE LINUX Products GmbH - * by Bernhard Walle <bwalle@suse.de> + * by Bernhard Walle <bernhard.walle@gmx.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License v2.0 as published by diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 5130b72..3a22eb9 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -70,7 +70,7 @@ config DRM_I915 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - depends on FB + select FB tristate "i915 driver" help Choose this option if you have a system that has Intel 830M, 845G, @@ -80,18 +80,17 @@ config DRM_I915 XFree86 4.4 and above. If unsure, build this and i830 as modules and the X server will load the correct one. -endchoice - config DRM_I915_KMS bool "Enable modesetting on intel by default" depends on DRM_I915 help - Choose this option if you want kernel modesetting enabled by default, - and you have a new enough userspace to support this. Running old - userspaces with this enabled will cause pain. Note that this causes - the driver to bind to PCI devices, which precludes loading things - like intelfb. + Choose this option if you want kernel modesetting enabled by default, + and you have a new enough userspace to support this. Running old + userspaces with this enabled will cause pain. Note that this causes + the driver to bind to PCI devices, which precludes loading things + like intelfb. +endchoice config DRM_MGA tristate "Matrox g200/g400" diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index bfce099..94a7688 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1741,9 +1741,8 @@ out: * RETURNS: * Zero on success, errno on failure. */ -void drm_fb_release(struct file *filp) +void drm_fb_release(struct drm_file *priv) { - struct drm_file *priv = filp->private_data; struct drm_device *dev = priv->minor->dev; struct drm_framebuffer *fb, *tfb; diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 964c5eb..733028b 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -512,8 +512,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, if (drm_mode_equal(&saved_mode, &crtc->mode)) { if (saved_x != crtc->x || saved_y != crtc->y || depth_changed || bpp_changed) { - crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, - old_fb); + ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, + old_fb); goto done; } } @@ -552,7 +552,9 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, /* Set up the DPLL and any encoders state that needs to adjust or depend * on the DPLL. */ - crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb); + ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb); + if (!ret) + goto done; list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { @@ -752,6 +754,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) if (!drm_crtc_helper_set_mode(set->crtc, set->mode, set->x, set->y, old_fb)) { + DRM_ERROR("failed to set mode on crtc %p\n", + set->crtc); ret = -EINVAL; goto fail_set_mode; } @@ -765,7 +769,10 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) old_fb = set->crtc->fb; if (set->crtc->fb != set->fb) set->crtc->fb = set->fb; - crtc_funcs->mode_set_base(set->crtc, set->x, set->y, old_fb); + ret = crtc_funcs->mode_set_base(set->crtc, + set->x, set->y, old_fb); + if (ret != 0) + goto fail_set_mode; } kfree(save_encoders); @@ -775,8 +782,12 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) fail_set_mode: set->crtc->enabled = save_enabled; count = 0; - list_for_each_entry(connector, &dev->mode_config.connector_list, head) + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (!connector->encoder) + continue; + connector->encoder->crtc = save_crtcs[count++]; + } fail_no_encoder: kfree(save_crtcs); count = 0; diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index b06a537..6c020fe 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -457,6 +457,9 @@ int drm_release(struct inode *inode, struct file *filp) if (dev->driver->driver_features & DRIVER_GEM) drm_gem_release(dev, file_priv); + if (dev->driver->driver_features & DRIVER_MODESET) + drm_fb_release(file_priv); + mutex_lock(&dev->ctxlist_mutex); if (!list_empty(&dev->ctxlist)) { struct drm_ctx_list *pos, *n; diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 6915fb8..88d3368 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -104,8 +104,8 @@ drm_gem_init(struct drm_device *dev) if (drm_mm_init(&mm->offset_manager, DRM_FILE_PAGE_OFFSET_START, DRM_FILE_PAGE_OFFSET_SIZE)) { - drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM); drm_ht_remove(&mm->offset_hash); + drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM); return -ENOMEM; } @@ -295,35 +295,37 @@ drm_gem_flink_ioctl(struct drm_device *dev, void *data, return -EBADF; again: - if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) - return -ENOMEM; + if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) { + ret = -ENOMEM; + goto err; + } spin_lock(&dev->object_name_lock); - if (obj->name) { - args->name = obj->name; + if (!obj->name) { + ret = idr_get_new_above(&dev->object_name_idr, obj, 1, + &obj->name); + args->name = (uint64_t) obj->name; spin_unlock(&dev->object_name_lock); - return 0; - } - ret = idr_get_new_above(&dev->object_name_idr, obj, 1, - &obj->name); - spin_unlock(&dev->object_name_lock); - if (ret == -EAGAIN) - goto again; - if (ret != 0) { - mutex_lock(&dev->struct_mutex); - drm_gem_object_unreference(obj); - mutex_unlock(&dev->struct_mutex); - return ret; - } + if (ret == -EAGAIN) + goto again; - /* - * Leave the reference from the lookup around as the - * name table now holds one - */ - args->name = (uint64_t) obj->name; + if (ret != 0) + goto err; - return 0; + /* Allocate a reference for the name table. */ + drm_gem_object_reference(obj); + } else { + args->name = (uint64_t) obj->name; + spin_unlock(&dev->object_name_lock); + ret = 0; + } + +err: + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; } /** @@ -448,6 +450,7 @@ drm_gem_object_handle_free(struct kref *kref) spin_lock(&dev->object_name_lock); if (obj->name) { idr_remove(&dev->object_name_idr, obj->name); + obj->name = 0; spin_unlock(&dev->object_name_lock); /* * The object name held a reference to this object, drop @@ -460,6 +463,26 @@ drm_gem_object_handle_free(struct kref *kref) } EXPORT_SYMBOL(drm_gem_object_handle_free); +void drm_gem_vm_open(struct vm_area_struct *vma) +{ + struct drm_gem_object *obj = vma->vm_private_data; + + drm_gem_object_reference(obj); +} +EXPORT_SYMBOL(drm_gem_vm_open); + +void drm_gem_vm_close(struct vm_area_struct *vma) +{ + struct drm_gem_object *obj = vma->vm_private_data; + struct drm_device *dev = obj->dev; + + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); +} +EXPORT_SYMBOL(drm_gem_vm_close); + + /** * drm_gem_mmap - memory map routine for GEM objects * @filp: DRM file pointer @@ -521,6 +544,14 @@ int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma) #endif vma->vm_page_prot = __pgprot(prot); + /* Take a ref for this mapping of the object, so that the fault + * handler can dereference the mmap offset's pointer to the object. + * This reference is cleaned up by the corresponding vm_close + * (which should happen whether the vma was created by this call, or + * by a vm_open due to mremap or partial unmap or whatever). + */ + drm_gem_object_reference(obj); + vma->vm_file = filp; /* Needed for drm_vm_open() */ drm_vm_open_locked(vma); diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 69aa0ab..3795dbc 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -276,6 +276,7 @@ int drm_irq_uninstall(struct drm_device * dev) for (i = 0; i < dev->num_crtcs; i++) { DRM_WAKEUP(&dev->vbl_queue[i]); dev->vblank_enabled[i] = 0; + dev->last_vblank[i] = dev->driver->get_vblank_counter(dev, i); } spin_unlock_irqrestore(&dev->vbl_lock, irqflags); diff --git a/drivers/gpu/drm/drm_memory.c b/drivers/gpu/drm/drm_memory.c index 803bc9e..bcc869b 100644 --- a/drivers/gpu/drm/drm_memory.c +++ b/drivers/gpu/drm/drm_memory.c @@ -171,9 +171,14 @@ EXPORT_SYMBOL(drm_core_ioremap); void drm_core_ioremap_wc(struct drm_map *map, struct drm_device *dev) { - map->handle = ioremap_wc(map->offset, map->size); + if (drm_core_has_AGP(dev) && + dev->agp && dev->agp->cant_use_aperture && map->type == _DRM_AGP) + map->handle = agp_remap(map->offset, map->size, dev); + else + map->handle = ioremap_wc(map->offset, map->size); } EXPORT_SYMBOL(drm_core_ioremap_wc); + void drm_core_ioremapfree(struct drm_map *map, struct drm_device *dev) { if (!map->handle || !map->size) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index ee64b73..2d797ff 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -202,7 +202,7 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init) dev_priv->ring.map.flags = 0; dev_priv->ring.map.mtrr = 0; - drm_core_ioremap(&dev_priv->ring.map, dev); + drm_core_ioremap_wc(&dev_priv->ring.map, dev); if (dev_priv->ring.map.handle == NULL) { i915_dma_cleanup(dev); @@ -731,8 +731,11 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_HAS_GEM: value = dev_priv->has_gem; break; + case I915_PARAM_NUM_FENCES_AVAIL: + value = dev_priv->num_fence_regs - dev_priv->fence_reg_start; + break; default: - DRM_ERROR("Unknown parameter %d\n", param->param); + DRM_DEBUG("Unknown parameter %d\n", param->param); return -EINVAL; } @@ -764,8 +767,15 @@ static int i915_setparam(struct drm_device *dev, void *data, case I915_SETPARAM_ALLOW_BATCHBUFFER: dev_priv->allow_batchbuffer = param->value; break; + case I915_SETPARAM_NUM_USED_FENCES: + if (param->value > dev_priv->num_fence_regs || + param->value < 0) + return -EINVAL; + /* Userspace can use first N regs */ + dev_priv->fence_reg_start = param->value; + break; default: - DRM_ERROR("unknown parameter %d\n", param->param); + DRM_DEBUG("unknown parameter %d\n", param->param); return -EINVAL; } @@ -966,10 +976,6 @@ static int i915_load_modeset_init(struct drm_device *dev) if (ret) goto kfree_devname; - dev_priv->mm.gtt_mapping = - io_mapping_create_wc(dev->agp->base, - dev->agp->agp_info.aper_size * 1024*1024); - /* Allow hardware batchbuffers unless told otherwise. */ dev_priv->allow_batchbuffer = 1; @@ -1081,6 +1087,23 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto free_priv; } + dev_priv->mm.gtt_mapping = + io_mapping_create_wc(dev->agp->base, + dev->agp->agp_info.aper_size * 1024*1024); + /* Set up a WC MTRR for non-PAT systems. This is more common than + * one would think, because the kernel disables PAT on first + * generation Core chips because WC PAT gets overridden by a UC + * MTRR if present. Even if a UC MTRR isn't present. + */ + dev_priv->mm.gtt_mtrr = mtrr_add(dev->agp->base, + dev->agp->agp_info.aper_size * + 1024 * 1024, + MTRR_TYPE_WRCOMB, 1); + if (dev_priv->mm.gtt_mtrr < 0) { + DRM_INFO("MTRR allocation failed\n. Graphics " + "performance may suffer.\n"); + } + #ifdef CONFIG_HIGHMEM64G /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */ dev_priv->has_gem = 0; @@ -1089,6 +1112,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev_priv->has_gem = 1; #endif + dev->driver->get_vblank_counter = i915_get_vblank_counter; + if (IS_GM45(dev)) + dev->driver->get_vblank_counter = gm45_get_vblank_counter; + i915_gem_load(dev); /* Init HWS */ @@ -1145,8 +1172,14 @@ int i915_driver_unload(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + io_mapping_free(dev_priv->mm.gtt_mapping); + if (dev_priv->mm.gtt_mtrr >= 0) { + mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base, + dev->agp->agp_info.aper_size * 1024 * 1024); + dev_priv->mm.gtt_mtrr = -1; + } + if (drm_core_check_feature(dev, DRIVER_MODESET)) { - io_mapping_free(dev_priv->mm.gtt_mapping); drm_irq_uninstall(dev); } diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index f8b3df0..b293ef0 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -27,6 +27,7 @@ * */ +#include <linux/device.h> #include "drmP.h" #include "drm.h" #include "i915_drm.h" @@ -66,6 +67,14 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) i915_save_state(dev); + /* If KMS is active, we do the leavevt stuff here */ + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + if (i915_gem_idle(dev)) + dev_err(&dev->pdev->dev, + "GEM idle failed, resume may fail\n"); + drm_irq_uninstall(dev); + } + intel_opregion_free(dev); if (state.event == PM_EVENT_SUSPEND) { @@ -79,6 +88,9 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) static int i915_resume(struct drm_device *dev) { + struct drm_i915_private *dev_priv = dev->dev_private; + int ret = 0; + pci_set_power_state(dev->pdev, PCI_D0); pci_restore_state(dev->pdev); if (pci_enable_device(dev->pdev)) @@ -89,11 +101,26 @@ static int i915_resume(struct drm_device *dev) intel_opregion_init(dev); - return 0; + /* KMS EnterVT equivalent */ + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + mutex_lock(&dev->struct_mutex); + dev_priv->mm.suspended = 0; + + ret = i915_gem_init_ringbuffer(dev); + if (ret != 0) + ret = -1; + mutex_unlock(&dev->struct_mutex); + + drm_irq_install(dev); + } + + return ret; } static struct vm_operations_struct i915_gem_vm_ops = { .fault = i915_gem_fault, + .open = drm_gem_vm_open, + .close = drm_gem_vm_close, }; static struct drm_driver driver = { @@ -112,7 +139,6 @@ static struct drm_driver driver = { .suspend = i915_suspend, .resume = i915_resume, .device_is_agp = i915_driver_device_is_agp, - .get_vblank_counter = i915_get_vblank_counter, .enable_vblank = i915_enable_vblank, .disable_vblank = i915_disable_vblank, .irq_preinstall = i915_driver_irq_preinstall, diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index e1351825..17fa408 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -184,6 +184,8 @@ typedef struct drm_i915_private { unsigned int lvds_dither:1; unsigned int lvds_vbt:1; unsigned int int_crt_support:1; + unsigned int lvds_use_ssc:1; + int lvds_ssc_freq; struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */ int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ @@ -284,6 +286,7 @@ typedef struct drm_i915_private { struct drm_mm gtt_space; struct io_mapping *gtt_mapping; + int gtt_mtrr; /** * List of objects currently involved in rendering from the @@ -534,6 +537,7 @@ extern int i915_vblank_pipe_get(struct drm_device *dev, void *data, extern int i915_enable_vblank(struct drm_device *dev, int crtc); extern void i915_disable_vblank(struct drm_device *dev, int crtc); extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc); +extern u32 gm45_get_vblank_counter(struct drm_device *dev, int crtc); extern int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv); extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask); @@ -601,6 +605,7 @@ int i915_gem_init_object(struct drm_gem_object *obj); void i915_gem_free_object(struct drm_gem_object *obj); int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment); void i915_gem_object_unpin(struct drm_gem_object *obj); +int i915_gem_object_unbind(struct drm_gem_object *obj); void i915_gem_lastclose(struct drm_device *dev); uint32_t i915_get_gem_seqno(struct drm_device *dev); void i915_gem_retire_requests(struct drm_device *dev); @@ -613,6 +618,7 @@ int i915_gem_init_ringbuffer(struct drm_device *dev); void i915_gem_cleanup_ringbuffer(struct drm_device *dev); int i915_gem_do_init(struct drm_device *dev, unsigned long start, unsigned long end); +int i915_gem_idle(struct drm_device *dev); int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write); @@ -784,6 +790,11 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev)) #define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev)) +/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte + * rows, which changed the alignment requirements and fence programming. + */ +#define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \ + IS_I915GM(dev))) #define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index debad5c..28b726d 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -34,10 +34,6 @@ #define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) -static void -i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain); static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); @@ -52,7 +48,7 @@ static void i915_gem_object_free_page_list(struct drm_gem_object *obj); static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment); -static void i915_gem_object_get_fence_reg(struct drm_gem_object *obj); +static int i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write); static void i915_gem_clear_fence_reg(struct drm_gem_object *obj); static int i915_gem_evict_something(struct drm_device *dev); static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj, @@ -567,6 +563,7 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) pgoff_t page_offset; unsigned long pfn; int ret = 0; + bool write = !!(vmf->flags & FAULT_FLAG_WRITE); /* We don't use vmf->pgoff since that has the fake offset */ page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >> @@ -585,8 +582,13 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) /* Need a new fence register? */ if (obj_priv->fence_reg == I915_FENCE_REG_NONE && - obj_priv->tiling_mode != I915_TILING_NONE) - i915_gem_object_get_fence_reg(obj); + obj_priv->tiling_mode != I915_TILING_NONE) { + ret = i915_gem_object_get_fence_reg(obj, write); + if (ret) { + mutex_unlock(&dev->struct_mutex); + return VM_FAULT_SIGBUS; + } + } pfn = ((dev->agp->base + obj_priv->gtt_offset) >> PAGE_SHIFT) + page_offset; @@ -601,8 +603,6 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) case -EAGAIN: return VM_FAULT_OOM; case -EFAULT: - case -EBUSY: - DRM_ERROR("can't insert pfn?? fault or busy...\n"); return VM_FAULT_SIGBUS; default: return VM_FAULT_NOPAGE; @@ -678,6 +678,30 @@ out_free_list: return ret; } +static void +i915_gem_free_mmap_offset(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + struct drm_gem_mm *mm = dev->mm_private; + struct drm_map_list *list; + + list = &obj->map_list; + drm_ht_remove_item(&mm->offset_hash, &list->hash); + + if (list->file_offset_node) { + drm_mm_put_block(list->file_offset_node); + list->file_offset_node = NULL; + } + + if (list->map) { + drm_free(list->map, sizeof(struct drm_map), DRM_MEM_DRIVER); + list->map = NULL; + } + + obj_priv->mmap_offset = 0; +} + /** * i915_gem_get_gtt_alignment - return required GTT alignment for an object * @obj: object to check @@ -752,8 +776,11 @@ i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, if (!obj_priv->mmap_offset) { ret = i915_gem_create_mmap_offset(obj); - if (ret) + if (ret) { + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return ret; + } } args->offset = obj_priv->mmap_offset; @@ -1024,6 +1051,9 @@ i915_gem_retire_requests(struct drm_device *dev) drm_i915_private_t *dev_priv = dev->dev_private; uint32_t seqno; + if (!dev_priv->hw_status_page) + return; + seqno = i915_get_gem_seqno(dev); while (!list_empty(&dev_priv->mm.request_list)) { @@ -1211,7 +1241,7 @@ i915_gem_object_wait_rendering(struct drm_gem_object *obj) /** * Unbinds an object from the GTT aperture. */ -static int +int i915_gem_object_unbind(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; @@ -1445,21 +1475,26 @@ static void i915_write_fence_reg(struct drm_i915_fence_reg *reg) drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; int regnum = obj_priv->fence_reg; + int tile_width; uint32_t val; uint32_t pitch_val; if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) || (obj_priv->gtt_offset & (obj->size - 1))) { - WARN(1, "%s: object not 1M or size aligned\n", __func__); + WARN(1, "%s: object 0x%08x not 1M or size (0x%zx) aligned\n", + __func__, obj_priv->gtt_offset, obj->size); return; } - if (obj_priv->tiling_mode == I915_TILING_Y && (IS_I945G(dev) || - IS_I945GM(dev) || - IS_G33(dev))) - pitch_val = (obj_priv->stride / 128) - 1; + if (obj_priv->tiling_mode == I915_TILING_Y && + HAS_128_BYTE_Y_TILING(dev)) + tile_width = 128; else - pitch_val = (obj_priv->stride / 512) - 1; + tile_width = 512; + + /* Note: pitch better be a power of two tile widths */ + pitch_val = obj_priv->stride / tile_width; + pitch_val = ffs(pitch_val) - 1; val = obj_priv->gtt_offset; if (obj_priv->tiling_mode == I915_TILING_Y) @@ -1483,7 +1518,8 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) || (obj_priv->gtt_offset & (obj->size - 1))) { - WARN(1, "%s: object not 1M or size aligned\n", __func__); + WARN(1, "%s: object 0x%08x not 1M or size aligned\n", + __func__, obj_priv->gtt_offset); return; } @@ -1503,6 +1539,7 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) /** * i915_gem_object_get_fence_reg - set up a fence reg for an object * @obj: object to map through a fence reg + * @write: object is about to be written * * When mapping objects through the GTT, userspace wants to be able to write * to them without having to worry about swizzling if the object is tiled. @@ -1513,8 +1550,8 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) * It then sets up the reg based on the object's properties: address, pitch * and tiling format. */ -static void -i915_gem_object_get_fence_reg(struct drm_gem_object *obj) +static int +i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write) { struct drm_device *dev = obj->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -1527,12 +1564,18 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj) WARN(1, "allocating a fence for non-tiled object?\n"); break; case I915_TILING_X: - WARN(obj_priv->stride & (512 - 1), - "object is X tiled but has non-512B pitch\n"); + if (!obj_priv->stride) + return -EINVAL; + WARN((obj_priv->stride & (512 - 1)), + "object 0x%08x is X tiled but has non-512B pitch\n", + obj_priv->gtt_offset); break; case I915_TILING_Y: - WARN(obj_priv->stride & (128 - 1), - "object is Y tiled but has non-128B pitch\n"); + if (!obj_priv->stride) + return -EINVAL; + WARN((obj_priv->stride & (128 - 1)), + "object 0x%08x is Y tiled but has non-128B pitch\n", + obj_priv->gtt_offset); break; } @@ -1563,10 +1606,11 @@ try_again: * objects to finish before trying again. */ if (i == dev_priv->num_fence_regs) { - ret = i915_gem_object_wait_rendering(reg->obj); + ret = i915_gem_object_set_to_gtt_domain(reg->obj, 0); if (ret) { - WARN(ret, "wait_rendering failed: %d\n", ret); - return; + WARN(ret != -ERESTARTSYS, + "switch to GTT domain failed: %d\n", ret); + return ret; } goto try_again; } @@ -1591,6 +1635,8 @@ try_again: i915_write_fence_reg(reg); else i830_write_fence_reg(reg); + + return 0; } /** @@ -1631,7 +1677,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) if (dev_priv->mm.suspended) return -EBUSY; if (alignment == 0) - alignment = PAGE_SIZE; + alignment = i915_gem_get_gtt_alignment(obj); if (alignment & (PAGE_SIZE - 1)) { DRM_ERROR("Invalid object alignment requested %u\n", alignment); return -EINVAL; @@ -1974,30 +2020,28 @@ i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) * drm_agp_chipset_flush */ static void -i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain) +i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; uint32_t invalidate_domains = 0; uint32_t flush_domains = 0; - BUG_ON(read_domains & I915_GEM_DOMAIN_CPU); - BUG_ON(write_domain == I915_GEM_DOMAIN_CPU); + BUG_ON(obj->pending_read_domains & I915_GEM_DOMAIN_CPU); + BUG_ON(obj->pending_write_domain == I915_GEM_DOMAIN_CPU); #if WATCH_BUF DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n", __func__, obj, - obj->read_domains, read_domains, - obj->write_domain, write_domain); + obj->read_domains, obj->pending_read_domains, + obj->write_domain, obj->pending_write_domain); #endif /* * If the object isn't moving to a new write domain, * let the object stay in multiple read domains */ - if (write_domain == 0) - read_domains |= obj->read_domains; + if (obj->pending_write_domain == 0) + obj->pending_read_domains |= obj->read_domains; else obj_priv->dirty = 1; @@ -2007,15 +2051,17 @@ i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, * any read domains which differ from the old * write domain */ - if (obj->write_domain && obj->write_domain != read_domains) { + if (obj->write_domain && + obj->write_domain != obj->pending_read_domains) { flush_domains |= obj->write_domain; - invalidate_domains |= read_domains & ~obj->write_domain; + invalidate_domains |= + obj->pending_read_domains & ~obj->write_domain; } /* * Invalidate any read caches which may have * stale data. That is, any new read domains. */ - invalidate_domains |= read_domains & ~obj->read_domains; + invalidate_domains |= obj->pending_read_domains & ~obj->read_domains; if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) { #if WATCH_BUF DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n", @@ -2024,9 +2070,15 @@ i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, i915_gem_clflush_object(obj); } - if ((write_domain | flush_domains) != 0) - obj->write_domain = write_domain; - obj->read_domains = read_domains; + /* The actual obj->write_domain will be updated with + * pending_write_domain after we emit the accumulated flush for all + * of our domain changes in execbuffers (which clears objects' + * write_domains). So if we have a current write domain that we + * aren't changing, set pending_write_domain to that. + */ + if (flush_domains == 0 && obj->pending_write_domain == 0) + obj->pending_write_domain = obj->write_domain; + obj->read_domains = obj->pending_read_domains; dev->invalidate_domains |= invalidate_domains; dev->flush_domains |= flush_domains; @@ -2229,6 +2281,8 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, (int) reloc.offset, reloc.read_domains, reloc.write_domain); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); return -EINVAL; } @@ -2458,13 +2512,15 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, if (dev_priv->mm.wedged) { DRM_ERROR("Execbuf while wedged\n"); mutex_unlock(&dev->struct_mutex); - return -EIO; + ret = -EIO; + goto pre_mutex_err; } if (dev_priv->mm.suspended) { DRM_ERROR("Execbuf while VT-switched.\n"); mutex_unlock(&dev->struct_mutex); - return -EBUSY; + ret = -EBUSY; + goto pre_mutex_err; } /* Look up object handles */ @@ -2532,9 +2588,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, struct drm_gem_object *obj = object_list[i]; /* Compute new gpu domains and update invalidate/flush */ - i915_gem_object_set_to_gpu_domain(obj, - obj->pending_read_domains, - obj->pending_write_domain); + i915_gem_object_set_to_gpu_domain(obj); } i915_verify_inactive(dev, __FILE__, __LINE__); @@ -2553,6 +2607,12 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, (void)i915_add_request(dev, dev->flush_domains); } + for (i = 0; i < args->buffer_count; i++) { + struct drm_gem_object *obj = object_list[i]; + + obj->write_domain = obj->pending_write_domain; + } + i915_verify_inactive(dev, __FILE__, __LINE__); #if WATCH_COHERENCY @@ -2610,15 +2670,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_verify_inactive(dev, __FILE__, __LINE__); - /* Copy the new buffer offsets back to the user's exec list. */ - ret = copy_to_user((struct drm_i915_relocation_entry __user *) - (uintptr_t) args->buffers_ptr, - exec_list, - sizeof(*exec_list) * args->buffer_count); - if (ret) - DRM_ERROR("failed to copy %d exec entries " - "back to user (%d)\n", - args->buffer_count, ret); err: for (i = 0; i < pinned; i++) i915_gem_object_unpin(object_list[i]); @@ -2628,6 +2679,18 @@ err: mutex_unlock(&dev->struct_mutex); + if (!ret) { + /* Copy the new buffer offsets back to the user's exec list. */ + ret = copy_to_user((struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + exec_list, + sizeof(*exec_list) * args->buffer_count); + if (ret) + DRM_ERROR("failed to copy %d exec entries " + "back to user (%d)\n", + args->buffer_count, ret); + } + pre_mutex_err: drm_free(object_list, sizeof(*object_list) * args->buffer_count, DRM_MEM_DRIVER); @@ -2652,6 +2715,14 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) DRM_ERROR("Failure to bind: %d", ret); return ret; } + /* + * Pre-965 chips need a fence register set up in order to + * properly handle tiled surfaces. + */ + if (!IS_I965G(dev) && + obj_priv->fence_reg == I915_FENCE_REG_NONE && + obj_priv->tiling_mode != I915_TILING_NONE) + i915_gem_object_get_fence_reg(obj, true); } obj_priv->pin_count++; @@ -2723,6 +2794,7 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data, if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) { DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n", args->handle); + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return -EINVAL; } @@ -2803,6 +2875,13 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, return -EBADF; } + /* Update the active list for the hardware's current position. + * Otherwise this only updates on a delayed timer or when irqs are + * actually unmasked, and our working set ends up being larger than + * required. + */ + i915_gem_retire_requests(dev); + obj_priv = obj->driver_private; /* Don't count being on the flushing list against the object being * done. Otherwise, a buffer left on the flushing list but not getting @@ -2855,9 +2934,6 @@ int i915_gem_init_object(struct drm_gem_object *obj) void i915_gem_free_object(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; - struct drm_gem_mm *mm = dev->mm_private; - struct drm_map_list *list; - struct drm_map *map; struct drm_i915_gem_object *obj_priv = obj->driver_private; while (obj_priv->pin_count > 0) @@ -2868,19 +2944,7 @@ void i915_gem_free_object(struct drm_gem_object *obj) i915_gem_object_unbind(obj); - list = &obj->map_list; - drm_ht_remove_item(&mm->offset_hash, &list->hash); - - if (list->file_offset_node) { - drm_mm_put_block(list->file_offset_node); - list->file_offset_node = NULL; - } - - map = list->map; - if (map) { - drm_free(map, sizeof(*map), DRM_MEM_DRIVER); - list->map = NULL; - } + i915_gem_free_mmap_offset(obj); drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER); drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); @@ -2919,7 +2983,7 @@ i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head) return 0; } -static int +int i915_gem_idle(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; @@ -3065,6 +3129,7 @@ i915_gem_init_hws(struct drm_device *dev) if (dev_priv->hw_status_page == NULL) { DRM_ERROR("Failed to map status page.\n"); memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); + i915_gem_object_unpin(obj); drm_gem_object_unreference(obj); return -EINVAL; } @@ -3077,6 +3142,31 @@ i915_gem_init_hws(struct drm_device *dev) return 0; } +static void +i915_gem_cleanup_hws(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + + if (dev_priv->hws_obj == NULL) + return; + + obj = dev_priv->hws_obj; + obj_priv = obj->driver_private; + + kunmap(obj_priv->page_list[0]); + i915_gem_object_unpin(obj); + drm_gem_object_unreference(obj); + dev_priv->hws_obj = NULL; + + memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); + dev_priv->hw_status_page = NULL; + + /* Write high address into HWS_PGA when disabling. */ + I915_WRITE(HWS_PGA, 0x1ffff000); +} + int i915_gem_init_ringbuffer(struct drm_device *dev) { @@ -3094,6 +3184,7 @@ i915_gem_init_ringbuffer(struct drm_device *dev) obj = drm_gem_object_alloc(dev, 128 * 1024); if (obj == NULL) { DRM_ERROR("Failed to allocate ringbuffer\n"); + i915_gem_cleanup_hws(dev); return -ENOMEM; } obj_priv = obj->driver_private; @@ -3101,6 +3192,7 @@ i915_gem_init_ringbuffer(struct drm_device *dev) ret = i915_gem_object_pin(obj, 4096); if (ret != 0) { drm_gem_object_unreference(obj); + i915_gem_cleanup_hws(dev); return ret; } @@ -3118,7 +3210,9 @@ i915_gem_init_ringbuffer(struct drm_device *dev) if (ring->map.handle == NULL) { DRM_ERROR("Failed to map ringbuffer.\n"); memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); + i915_gem_object_unpin(obj); drm_gem_object_unreference(obj); + i915_gem_cleanup_hws(dev); return -EINVAL; } ring->ring_obj = obj; @@ -3198,20 +3292,7 @@ i915_gem_cleanup_ringbuffer(struct drm_device *dev) dev_priv->ring.ring_obj = NULL; memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); - if (dev_priv->hws_obj != NULL) { - struct drm_gem_object *obj = dev_priv->hws_obj; - struct drm_i915_gem_object *obj_priv = obj->driver_private; - - kunmap(obj_priv->page_list[0]); - i915_gem_object_unpin(obj); - drm_gem_object_unreference(obj); - dev_priv->hws_obj = NULL; - memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); - dev_priv->hw_status_page = NULL; - - /* Write high address into HWS_PGA when disabling. */ - I915_WRITE(HWS_PGA, 0x1ffff000); - } + i915_gem_cleanup_hws(dev); } int @@ -3229,10 +3310,6 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data, dev_priv->mm.wedged = 0; } - dev_priv->mm.gtt_mapping = io_mapping_create_wc(dev->agp->base, - dev->agp->agp_info.aper_size - * 1024 * 1024); - mutex_lock(&dev->struct_mutex); dev_priv->mm.suspended = 0; @@ -3255,7 +3332,6 @@ int i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv = dev->dev_private; int ret; if (drm_core_check_feature(dev, DRIVER_MODESET)) @@ -3264,7 +3340,6 @@ i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, ret = i915_gem_idle(dev); drm_irq_uninstall(dev); - io_mapping_free(dev_priv->mm.gtt_mapping); return ret; } @@ -3273,6 +3348,9 @@ i915_gem_lastclose(struct drm_device *dev) { int ret; + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return; + ret = i915_gem_idle(dev); if (ret) DRM_ERROR("failed to idle hardware: %d\n", ret); @@ -3294,7 +3372,7 @@ i915_gem_load(struct drm_device *dev) /* Old X drivers will take 0-2 for front, back, depth buffers */ dev_priv->fence_reg_start = 3; - if (IS_I965G(dev)) + if (IS_I965G(dev) || IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) dev_priv->num_fence_regs = 16; else dev_priv->num_fence_regs = 8; diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 241f39b..7fb4191 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -173,6 +173,73 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) dev_priv->mm.bit_6_swizzle_y = swizzle_y; } + +/** + * Returns the size of the fence for a tiled object of the given size. + */ +static int +i915_get_fence_size(struct drm_device *dev, int size) +{ + int i; + int start; + + if (IS_I965G(dev)) { + /* The 965 can have fences at any page boundary. */ + return ALIGN(size, 4096); + } else { + /* Align the size to a power of two greater than the smallest + * fence size. + */ + if (IS_I9XX(dev)) + start = 1024 * 1024; + else + start = 512 * 1024; + + for (i = start; i < size; i <<= 1) + ; + + return i; + } +} + +/* Check pitch constriants for all chips & tiling formats */ +static bool +i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) +{ + int tile_width; + + /* Linear is always fine */ + if (tiling_mode == I915_TILING_NONE) + return true; + + if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)) + tile_width = 128; + else + tile_width = 512; + + /* 965+ just needs multiples of tile width */ + if (IS_I965G(dev)) { + if (stride & (tile_width - 1)) + return false; + return true; + } + + /* Pre-965 needs power of two tile widths */ + if (stride < tile_width) + return false; + + if (stride & (stride - 1)) + return false; + + /* We don't handle the aperture area covered by the fence being bigger + * than the object size. + */ + if (i915_get_fence_size(dev, size) != size) + return false; + + return true; +} + /** * Sets the tiling mode of an object, returning the required swizzling of * bit 6 of addresses in the object. @@ -191,6 +258,11 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, return -EINVAL; obj_priv = obj->driver_private; + if (!i915_tiling_ok(dev, args->stride, obj->size, args->tiling_mode)) { + drm_gem_object_unreference(obj); + return -EINVAL; + } + mutex_lock(&dev->struct_mutex); if (args->tiling_mode == I915_TILING_NONE) { @@ -207,12 +279,28 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE; } } - obj_priv->tiling_mode = args->tiling_mode; - obj_priv->stride = args->stride; + if (args->tiling_mode != obj_priv->tiling_mode) { + int ret; - mutex_unlock(&dev->struct_mutex); + /* Unbind the object, as switching tiling means we're + * switching the cache organization due to fencing, probably. + */ + ret = i915_gem_object_unbind(obj); + if (ret != 0) { + WARN(ret != -ERESTARTSYS, + "failed to unbind object for tiling switch"); + args->tiling_mode = obj_priv->tiling_mode; + mutex_unlock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + + return ret; + } + obj_priv->tiling_mode = args->tiling_mode; + } + obj_priv->stride = args->stride; drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return 0; } @@ -251,9 +339,8 @@ i915_gem_get_tiling(struct drm_device *dev, void *data, DRM_ERROR("unknown tiling mode\n"); } - mutex_unlock(&dev->struct_mutex); - drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return 0; } diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 6290219..548ff2c 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -174,6 +174,19 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) return count; } +u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + int reg = pipe ? PIPEB_FRMCOUNT_GM45 : PIPEA_FRMCOUNT_GM45; + + if (!i915_pipe_enabled(dev, pipe)) { + DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe); + return 0; + } + + return I915_READ(reg); +} + irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 2731625..9d6539a 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -186,12 +186,12 @@ #define FENCE_REG_830_0 0x2000 #define I830_FENCE_START_MASK 0x07f80000 #define I830_FENCE_TILING_Y_SHIFT 12 -#define I830_FENCE_SIZE_BITS(size) ((get_order(size >> 19) - 1) << 8) +#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8) #define I830_FENCE_PITCH_SHIFT 4 #define I830_FENCE_REG_VALID (1<<0) #define I915_FENCE_START_MASK 0x0ff00000 -#define I915_FENCE_SIZE_BITS(size) ((get_order(size >> 20) - 1) << 8) +#define I915_FENCE_SIZE_BITS(size) ((ffs((size) >> 20) - 1) << 8) #define FENCE_REG_965_0 0x03000 #define I965_FENCE_PITCH_SHIFT 2 @@ -1371,6 +1371,9 @@ #define PIPE_FRAME_LOW_SHIFT 24 #define PIPE_PIXEL_MASK 0x00ffffff #define PIPE_PIXEL_SHIFT 0 +/* GM45+ just has to be different */ +#define PIPEA_FRMCOUNT_GM45 0x70040 +#define PIPEA_FLIPCOUNT_GM45 0x70044 /* Cursor A & B regs */ #define CURACNTR 0x70080 @@ -1439,6 +1442,9 @@ #define PIPEBSTAT 0x71024 #define PIPEBFRAMEHIGH 0x71040 #define PIPEBFRAMEPIXEL 0x71044 +#define PIPEB_FRMCOUNT_GM45 0x71040 +#define PIPEB_FLIPCOUNT_GM45 0x71044 + /* Display B control */ #define DSPBCNTR 0x71180 diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 4ca82a0..65be30d 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -135,6 +135,14 @@ parse_general_features(struct drm_i915_private *dev_priv, if (general) { dev_priv->int_tv_support = general->int_tv_support; dev_priv->int_crt_support = general->int_crt_support; + dev_priv->lvds_use_ssc = general->enable_ssc; + + if (dev_priv->lvds_use_ssc) { + if (IS_I855(dev_priv->dev)) + dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48; + else + dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96; + } } } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 31c3732..65b635c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -90,12 +90,12 @@ typedef struct { #define I9XX_DOT_MAX 400000 #define I9XX_VCO_MIN 1400000 #define I9XX_VCO_MAX 2800000 -#define I9XX_N_MIN 3 -#define I9XX_N_MAX 8 +#define I9XX_N_MIN 1 +#define I9XX_N_MAX 6 #define I9XX_M_MIN 70 #define I9XX_M_MAX 120 #define I9XX_M1_MIN 10 -#define I9XX_M1_MAX 20 +#define I9XX_M1_MAX 22 #define I9XX_M2_MIN 5 #define I9XX_M2_MAX 9 #define I9XX_P_SDVO_DAC_MIN 5 @@ -189,9 +189,7 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc) return limit; } -/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ - -static void i8xx_clock(int refclk, intel_clock_t *clock) +static void intel_clock(int refclk, intel_clock_t *clock) { clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = clock->p1 * clock->p2; @@ -199,25 +197,6 @@ static void i8xx_clock(int refclk, intel_clock_t *clock) clock->dot = clock->vco / clock->p; } -/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */ - -static void i9xx_clock(int refclk, intel_clock_t *clock) -{ - clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); - clock->p = clock->p1 * clock->p2; - clock->vco = refclk * clock->m / (clock->n + 2); - clock->dot = clock->vco / clock->p; -} - -static void intel_clock(struct drm_device *dev, int refclk, - intel_clock_t *clock) -{ - if (IS_I9XX(dev)) - i9xx_clock (refclk, clock); - else - i8xx_clock (refclk, clock); -} - /** * Returns whether any output on the specified pipe is of the specified type */ @@ -238,7 +217,7 @@ bool intel_pipe_has_type (struct drm_crtc *crtc, int type) return false; } -#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } +#define INTELPllInvalid(s) do { DRM_DEBUG(s); return false; } while (0) /** * Returns whether the given set of divisors are valid for a given refclk with * the given connectors. @@ -318,7 +297,7 @@ static bool intel_find_best_PLL(struct drm_crtc *crtc, int target, clock.p1 <= limit->p1.max; clock.p1++) { int this_err; - intel_clock(dev, refclk, &clock); + intel_clock(refclk, &clock); if (!intel_PLL_is_valid(crtc, &clock)) continue; @@ -343,7 +322,7 @@ intel_wait_for_vblank(struct drm_device *dev) udelay(20000); } -static void +static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { @@ -361,11 +340,21 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; u32 dspcntr, alignment; + int ret; /* no fb bound */ if (!crtc->fb) { DRM_DEBUG("No FB bound\n"); - return; + return 0; + } + + switch (pipe) { + case 0: + case 1: + break; + default: + DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); + return -EINVAL; } intel_fb = to_intel_framebuffer(crtc->fb); @@ -377,28 +366,30 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, alignment = 64 * 1024; break; case I915_TILING_X: - if (IS_I9XX(dev)) - alignment = 1024 * 1024; - else - alignment = 512 * 1024; + /* pin() will align the object as required by fence */ + alignment = 0; break; case I915_TILING_Y: /* FIXME: Is this true? */ DRM_ERROR("Y tiled not allowed for scan out buffers\n"); - return; + return -EINVAL; default: BUG(); } - if (i915_gem_object_pin(intel_fb->obj, alignment)) - return; - - i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1); - - Start = obj_priv->gtt_offset; - Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + mutex_lock(&dev->struct_mutex); + ret = i915_gem_object_pin(intel_fb->obj, alignment); + if (ret != 0) { + mutex_unlock(&dev->struct_mutex); + return ret; + } - I915_WRITE(dspstride, crtc->fb->pitch); + ret = i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1); + if (ret != 0) { + i915_gem_object_unpin(intel_fb->obj); + mutex_unlock(&dev->struct_mutex); + return ret; + } dspcntr = I915_READ(dspcntr_reg); /* Mask out pixel format bits in case we change it */ @@ -419,11 +410,17 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, break; default: DRM_ERROR("Unknown color depth\n"); - return; + i915_gem_object_unpin(intel_fb->obj); + mutex_unlock(&dev->struct_mutex); + return -EINVAL; } I915_WRITE(dspcntr_reg, dspcntr); + Start = obj_priv->gtt_offset; + Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y); + I915_WRITE(dspstride, crtc->fb->pitch); if (IS_I965G(dev)) { I915_WRITE(dspbase, Offset); I915_READ(dspbase); @@ -440,27 +437,24 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, intel_fb = to_intel_framebuffer(old_fb); i915_gem_object_unpin(intel_fb->obj); } + mutex_unlock(&dev->struct_mutex); if (!dev->primary->master) - return; + return 0; master_priv = dev->primary->master->driver_priv; if (!master_priv->sarea_priv) - return; + return 0; - switch (pipe) { - case 0: - master_priv->sarea_priv->pipeA_x = x; - master_priv->sarea_priv->pipeA_y = y; - break; - case 1: + if (pipe) { master_priv->sarea_priv->pipeB_x = x; master_priv->sarea_priv->pipeB_y = y; - break; - default: - DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); - break; + } else { + master_priv->sarea_priv->pipeA_x = x; + master_priv->sarea_priv->pipeA_y = y; } + + return 0; } @@ -708,11 +702,11 @@ static int intel_panel_fitter_pipe (struct drm_device *dev) return 1; } -static void intel_crtc_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) +static int intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -732,13 +726,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; - int refclk; + int refclk, num_outputs = 0; intel_clock_t clock; u32 dpll = 0, fp = 0, dspcntr, pipeconf; bool ok, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; + int ret; drm_vblank_pre_modeset(dev, pipe); @@ -755,6 +750,8 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, case INTEL_OUTPUT_SDVO: case INTEL_OUTPUT_HDMI: is_sdvo = true; + if (intel_output->needs_tv_clock) + is_tv = true; break; case INTEL_OUTPUT_DVO: is_dvo = true; @@ -766,9 +763,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, is_crt = true; break; } + + num_outputs++; } - if (IS_I9XX(dev)) { + if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) { + refclk = dev_priv->lvds_ssc_freq * 1000; + DRM_DEBUG("using SSC reference clock of %d MHz\n", refclk / 1000); + } else if (IS_I9XX(dev)) { refclk = 96000; } else { refclk = 48000; @@ -777,7 +779,7 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); - return; + return -EINVAL; } fp = clock.n << 16 | clock.m1 << 8 | clock.m2; @@ -827,11 +829,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, } } - if (is_tv) { + if (is_sdvo && is_tv) + dpll |= PLL_REF_INPUT_TVCLKINBC; + else if (is_tv) /* XXX: just matching BIOS for now */ -/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; - } + else if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; @@ -948,9 +953,13 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(dspcntr_reg, dspcntr); /* Flush the plane changes */ - intel_pipe_set_base(crtc, x, y, old_fb); + ret = intel_pipe_set_base(crtc, x, y, old_fb); + if (ret != 0) + return ret; drm_vblank_post_modeset(dev, pipe); + + return 0; } /** Loads the palette/gamma unit for the CRTC with the prepared values */ @@ -999,6 +1008,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, temp = CURSOR_MODE_DISABLE; addr = 0; bo = NULL; + mutex_lock(&dev->struct_mutex); goto finish; } @@ -1021,18 +1031,19 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, } /* we only need to pin inside GTT if cursor is non-phy */ + mutex_lock(&dev->struct_mutex); if (!dev_priv->cursor_needs_physical) { ret = i915_gem_object_pin(bo, PAGE_SIZE); if (ret) { DRM_ERROR("failed to pin cursor bo\n"); - goto fail; + goto fail_locked; } addr = obj_priv->gtt_offset; } else { ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1); if (ret) { DRM_ERROR("failed to attach phys object\n"); - goto fail; + goto fail_locked; } addr = obj_priv->phys_obj->handle->busaddr; } @@ -1052,10 +1063,9 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo); } else i915_gem_object_unpin(intel_crtc->cursor_bo); - mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(intel_crtc->cursor_bo); - mutex_unlock(&dev->struct_mutex); } + mutex_unlock(&dev->struct_mutex); intel_crtc->cursor_addr = addr; intel_crtc->cursor_bo = bo; @@ -1063,6 +1073,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, return 0; fail: mutex_lock(&dev->struct_mutex); +fail_locked: drm_gem_object_unreference(bo); mutex_unlock(&dev->struct_mutex); return ret; @@ -1290,7 +1301,7 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) } /* XXX: Handle the 100Mhz refclk */ - i9xx_clock(96000, &clock); + intel_clock(96000, &clock); } else { bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN); @@ -1302,9 +1313,9 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) { /* XXX: might not be 66MHz */ - i8xx_clock(66000, &clock); + intel_clock(66000, &clock); } else - i8xx_clock(48000, &clock); + intel_clock(48000, &clock); } else { if (dpll & PLL_P1_DIVIDE_BY_TWO) clock.p1 = 2; @@ -1317,7 +1328,7 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) else clock.p2 = 2; - i8xx_clock(48000, &clock); + intel_clock(48000, &clock); } } @@ -1452,6 +1463,7 @@ static int intel_connector_clones(struct drm_device *dev, int type_mask) static void intel_setup_outputs(struct drm_device *dev) { + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_connector *connector; intel_crt_init(dev); @@ -1463,13 +1475,16 @@ static void intel_setup_outputs(struct drm_device *dev) if (IS_I9XX(dev)) { int found; - found = intel_sdvo_init(dev, SDVOB); - if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) - intel_hdmi_init(dev, SDVOB); - - found = intel_sdvo_init(dev, SDVOC); - if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) - intel_hdmi_init(dev, SDVOC); + if (I915_READ(SDVOB) & SDVO_DETECTED) { + found = intel_sdvo_init(dev, SDVOB); + if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) + intel_hdmi_init(dev, SDVOB); + } + if (!IS_G4X(dev) || (I915_READ(SDVOB) & SDVO_DETECTED)) { + found = intel_sdvo_init(dev, SDVOC); + if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) + intel_hdmi_init(dev, SDVOC); + } } else intel_dvo_init(dev); @@ -1592,7 +1607,9 @@ intel_user_framebuffer_create(struct drm_device *dev, ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj); if (ret) { + mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return NULL; } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 8a4cc50..957daef 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -82,6 +82,7 @@ struct intel_output { struct intel_i2c_chan *i2c_bus; /* for control functions */ struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */ bool load_detect_temp; + bool needs_tv_clock; void *dev_priv; }; diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index afd1217..b7f0ebe 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -473,7 +473,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, ret = intel_framebuffer_create(dev, &mode_cmd, &fb, fbo); if (ret) { DRM_ERROR("failed to allocate fb.\n"); - goto out_unref; + goto out_unpin; } list_add(&fb->filp_head, &dev->mode_config.fb_kernel_list); @@ -484,7 +484,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, info = framebuffer_alloc(sizeof(struct intelfb_par), device); if (!info) { ret = -ENOMEM; - goto out_unref; + goto out_unpin; } par = info->par; @@ -513,7 +513,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, size); if (!info->screen_base) { ret = -ENOSPC; - goto out_unref; + goto out_unpin; } info->screen_size = size; @@ -608,6 +608,8 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, mutex_unlock(&dev->struct_mutex); return 0; +out_unpin: + i915_gem_object_unpin(fbo); out_unref: drm_gem_object_unreference(fbo); mutex_unlock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index b36a521..0d211af 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -27,6 +27,7 @@ * Jesse Barnes <jesse.barnes@intel.com> */ +#include <linux/dmi.h> #include <linux/i2c.h> #include "drmP.h" #include "drm.h" @@ -311,10 +312,8 @@ static int intel_lvds_get_modes(struct drm_connector *connector) if (dev_priv->panel_fixed_mode != NULL) { struct drm_display_mode *mode; - mutex_lock(&dev->mode_config.mutex); mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); drm_mode_probed_add(connector, mode); - mutex_unlock(&dev->mode_config.mutex); return 1; } @@ -405,6 +404,16 @@ void intel_lvds_init(struct drm_device *dev) u32 lvds; int pipe; + /* Blacklist machines that we know falsely report LVDS. */ + /* FIXME: add a check for the Aopen Mini PC */ + + /* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */ + if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") || + dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) { + DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n"); + return; + } + intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); if (!intel_output) { return; @@ -458,7 +467,7 @@ void intel_lvds_init(struct drm_device *dev) dev_priv->panel_fixed_mode = drm_mode_duplicate(dev, scan); mutex_unlock(&dev->mode_config.mutex); - goto out; /* FIXME: check for quirks */ + goto out; } mutex_unlock(&dev->mode_config.mutex); } @@ -472,8 +481,6 @@ void intel_lvds_init(struct drm_device *dev) if (dev_priv->panel_fixed_mode) { dev_priv->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; - drm_mode_probed_add(connector, - dev_priv->panel_fixed_mode); goto out; } } @@ -492,7 +499,7 @@ void intel_lvds_init(struct drm_device *dev) if (dev_priv->panel_fixed_mode) { dev_priv->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; - goto out; /* FIXME: check for quirks */ + goto out; } } @@ -500,38 +507,6 @@ void intel_lvds_init(struct drm_device *dev) if (!dev_priv->panel_fixed_mode) goto failed; - /* FIXME: detect aopen & mac mini type stuff automatically? */ - /* - * Blacklist machines with BIOSes that list an LVDS panel without - * actually having one. - */ - if (IS_I945GM(dev)) { - /* aopen mini pc */ - if (dev->pdev->subsystem_vendor == 0xa0a0) - goto failed; - - if ((dev->pdev->subsystem_vendor == 0x8086) && - (dev->pdev->subsystem_device == 0x7270)) { - /* It's a Mac Mini or Macbook Pro. - * - * Apple hardware is out to get us. The macbook pro - * has a real LVDS panel, but the mac mini does not, - * and they have the same device IDs. We'll - * distinguish by panel size, on the assumption - * that Apple isn't about to make any machines with an - * 800x600 display. - */ - - if (dev_priv->panel_fixed_mode != NULL && - dev_priv->panel_fixed_mode->hdisplay == 800 && - dev_priv->panel_fixed_mode->vdisplay == 600) { - DRM_DEBUG("Suspected Mac Mini, ignoring the LVDS\n"); - goto failed; - } - } - } - - out: drm_sysfs_connector_add(connector); return; diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 4072154..fbe6f39 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -40,13 +40,59 @@ struct intel_sdvo_priv { struct intel_i2c_chan *i2c_bus; int slaveaddr; + + /* Register for the SDVO device: SDVOB or SDVOC */ int output_device; - u16 active_outputs; + /* Active outputs controlled by this SDVO output */ + uint16_t controlled_output; + /* + * Capabilities of the SDVO device returned by + * i830_sdvo_get_capabilities() + */ struct intel_sdvo_caps caps; + + /* Pixel clock limitations reported by the SDVO device, in kHz */ int pixel_clock_min, pixel_clock_max; + /** + * This is set if we're going to treat the device as TV-out. + * + * While we have these nice friendly flags for output types that ought + * to decide this for us, the S-Video output on our HDMI+S-Video card + * shows up as RGB1 (VGA). + */ + bool is_tv; + + /** + * This is set if we treat the device as HDMI, instead of DVI. + */ + bool is_hdmi; + + /** + * Returned SDTV resolutions allowed for the current format, if the + * device reported it. + */ + struct intel_sdvo_sdtv_resolution_reply sdtv_resolutions; + + /** + * Current selected TV format. + * + * This is stored in the same structure that's passed to the device, for + * convenience. + */ + struct intel_sdvo_tv_format tv_format; + + /* + * supported encoding mode, used to determine whether HDMI is + * supported + */ + struct intel_sdvo_encode encode; + + /* DDC bus used by this SDVO output */ + uint8_t ddc_bus; + int save_sdvo_mult; u16 save_active_outputs; struct intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2; @@ -147,9 +193,9 @@ static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, #define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} /** Mapping of command numbers to names, for debug output */ -const static struct _sdvo_cmd_name { - u8 cmd; - char *name; +static const struct _sdvo_cmd_name { + u8 cmd; + char *name; } sdvo_cmd_names[] = { SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET), SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS), @@ -186,8 +232,35 @@ const static struct _sdvo_cmd_name { SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS), SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT), SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_RESOLUTION_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_POWER_STATES), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POWER_STATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODER_POWER_STATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DISPLAY_POWER_STATE), SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS), + /* HDMI op code */ + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_PIXEL_REPLI), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PIXEL_REPLI), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY_CAP), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_COLORIMETRY), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_AUDIO_STAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_STAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INDEX), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_INDEX), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INFO), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_AV_SPLIT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_AV_SPLIT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_TXRATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_TXRATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_DATA), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA), }; #define SDVO_NAME(dev_priv) ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC") @@ -506,6 +579,50 @@ static bool intel_sdvo_set_output_timing(struct intel_output *intel_output, SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd); } +static bool +intel_sdvo_create_preferred_input_timing(struct intel_output *output, + uint16_t clock, + uint16_t width, + uint16_t height) +{ + struct intel_sdvo_preferred_input_timing_args args; + uint8_t status; + + args.clock = clock; + args.width = width; + args.height = height; + intel_sdvo_write_cmd(output, SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING, + &args, sizeof(args)); + status = intel_sdvo_read_response(output, NULL, 0); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return true; +} + +static bool intel_sdvo_get_preferred_input_timing(struct intel_output *output, + struct intel_sdvo_dtd *dtd) +{ + bool status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1, + NULL, 0); + + status = intel_sdvo_read_response(output, &dtd->part1, + sizeof(dtd->part1)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2, + NULL, 0); + + status = intel_sdvo_read_response(output, &dtd->part2, + sizeof(dtd->part2)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return false; +} static int intel_sdvo_get_clock_rate_mult(struct intel_output *intel_output) { @@ -536,36 +653,12 @@ static bool intel_sdvo_set_clock_rate_mult(struct intel_output *intel_output, u8 return true; } -static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - /* Make the CRTC code factor in the SDVO pixel multiplier. The SDVO - * device will be told of the multiplier during mode_set. - */ - adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); - return true; -} - -static void intel_sdvo_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) +static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd, + struct drm_display_mode *mode) { - struct drm_device *dev = encoder->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_crtc *crtc = encoder->crtc; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct intel_output *intel_output = enc_to_intel_output(encoder); - struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; - u16 width, height; - u16 h_blank_len, h_sync_len, v_blank_len, v_sync_len; - u16 h_sync_offset, v_sync_offset; - u32 sdvox; - struct intel_sdvo_dtd output_dtd; - int sdvo_pixel_multiply; - - if (!mode) - return; + uint16_t width, height; + uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len; + uint16_t h_sync_offset, v_sync_offset; width = mode->crtc_hdisplay; height = mode->crtc_vdisplay; @@ -580,93 +673,423 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; - output_dtd.part1.clock = mode->clock / 10; - output_dtd.part1.h_active = width & 0xff; - output_dtd.part1.h_blank = h_blank_len & 0xff; - output_dtd.part1.h_high = (((width >> 8) & 0xf) << 4) | + dtd->part1.clock = mode->clock / 10; + dtd->part1.h_active = width & 0xff; + dtd->part1.h_blank = h_blank_len & 0xff; + dtd->part1.h_high = (((width >> 8) & 0xf) << 4) | ((h_blank_len >> 8) & 0xf); - output_dtd.part1.v_active = height & 0xff; - output_dtd.part1.v_blank = v_blank_len & 0xff; - output_dtd.part1.v_high = (((height >> 8) & 0xf) << 4) | + dtd->part1.v_active = height & 0xff; + dtd->part1.v_blank = v_blank_len & 0xff; + dtd->part1.v_high = (((height >> 8) & 0xf) << 4) | ((v_blank_len >> 8) & 0xf); - output_dtd.part2.h_sync_off = h_sync_offset; - output_dtd.part2.h_sync_width = h_sync_len & 0xff; - output_dtd.part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | + dtd->part2.h_sync_off = h_sync_offset; + dtd->part2.h_sync_width = h_sync_len & 0xff; + dtd->part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | (v_sync_len & 0xf); - output_dtd.part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) | + dtd->part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) | ((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) | ((v_sync_len & 0x30) >> 4); - output_dtd.part2.dtd_flags = 0x18; + dtd->part2.dtd_flags = 0x18; if (mode->flags & DRM_MODE_FLAG_PHSYNC) - output_dtd.part2.dtd_flags |= 0x2; + dtd->part2.dtd_flags |= 0x2; if (mode->flags & DRM_MODE_FLAG_PVSYNC) - output_dtd.part2.dtd_flags |= 0x4; + dtd->part2.dtd_flags |= 0x4; + + dtd->part2.sdvo_flags = 0; + dtd->part2.v_sync_off_high = v_sync_offset & 0xc0; + dtd->part2.reserved = 0; +} + +static void intel_sdvo_get_mode_from_dtd(struct drm_display_mode * mode, + struct intel_sdvo_dtd *dtd) +{ + uint16_t width, height; + uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len; + uint16_t h_sync_offset, v_sync_offset; + + width = mode->crtc_hdisplay; + height = mode->crtc_vdisplay; + + /* do some mode translations */ + h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start; + h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; + + v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start; + v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; + + h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; + v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; + + mode->hdisplay = dtd->part1.h_active; + mode->hdisplay += ((dtd->part1.h_high >> 4) & 0x0f) << 8; + mode->hsync_start = mode->hdisplay + dtd->part2.h_sync_off; + mode->hsync_start += (dtd->part2.sync_off_width_high & 0xa0) << 2; + mode->hsync_end = mode->hsync_start + dtd->part2.h_sync_width; + mode->hsync_end += (dtd->part2.sync_off_width_high & 0x30) << 4; + mode->htotal = mode->hdisplay + dtd->part1.h_blank; + mode->htotal += (dtd->part1.h_high & 0xf) << 8; + + mode->vdisplay = dtd->part1.v_active; + mode->vdisplay += ((dtd->part1.v_high >> 4) & 0x0f) << 8; + mode->vsync_start = mode->vdisplay; + mode->vsync_start += (dtd->part2.v_sync_off_width >> 4) & 0xf; + mode->vsync_start += (dtd->part2.sync_off_width_high & 0x0a) << 2; + mode->vsync_start += dtd->part2.v_sync_off_high & 0xc0; + mode->vsync_end = mode->vsync_start + + (dtd->part2.v_sync_off_width & 0xf); + mode->vsync_end += (dtd->part2.sync_off_width_high & 0x3) << 4; + mode->vtotal = mode->vdisplay + dtd->part1.v_blank; + mode->vtotal += (dtd->part1.v_high & 0xf) << 8; + + mode->clock = dtd->part1.clock * 10; + + mode->flags &= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC); + if (dtd->part2.dtd_flags & 0x2) + mode->flags |= DRM_MODE_FLAG_PHSYNC; + if (dtd->part2.dtd_flags & 0x4) + mode->flags |= DRM_MODE_FLAG_PVSYNC; +} + +static bool intel_sdvo_get_supp_encode(struct intel_output *output, + struct intel_sdvo_encode *encode) +{ + uint8_t status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_SUPP_ENCODE, NULL, 0); + status = intel_sdvo_read_response(output, encode, sizeof(*encode)); + if (status != SDVO_CMD_STATUS_SUCCESS) { /* non-support means DVI */ + memset(encode, 0, sizeof(*encode)); + return false; + } + + return true; +} + +static bool intel_sdvo_set_encode(struct intel_output *output, uint8_t mode) +{ + uint8_t status; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_ENCODE, &mode, 1); + status = intel_sdvo_read_response(output, NULL, 0); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_set_colorimetry(struct intel_output *output, + uint8_t mode) +{ + uint8_t status; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_COLORIMETRY, &mode, 1); + status = intel_sdvo_read_response(output, NULL, 0); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +#if 0 +static void intel_sdvo_dump_hdmi_buf(struct intel_output *output) +{ + int i, j; + uint8_t set_buf_index[2]; + uint8_t av_split; + uint8_t buf_size; + uint8_t buf[48]; + uint8_t *pos; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_AV_SPLIT, NULL, 0); + intel_sdvo_read_response(output, &av_split, 1); + + for (i = 0; i <= av_split; i++) { + set_buf_index[0] = i; set_buf_index[1] = 0; + intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_INDEX, + set_buf_index, 2); + intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_INFO, NULL, 0); + intel_sdvo_read_response(output, &buf_size, 1); + + pos = buf; + for (j = 0; j <= buf_size; j += 8) { + intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_DATA, + NULL, 0); + intel_sdvo_read_response(output, pos, 8); + pos += 8; + } + } +} +#endif + +static void intel_sdvo_set_hdmi_buf(struct intel_output *output, int index, + uint8_t *data, int8_t size, uint8_t tx_rate) +{ + uint8_t set_buf_index[2]; + + set_buf_index[0] = index; + set_buf_index[1] = 0; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_INDEX, set_buf_index, 2); + + for (; size > 0; size -= 8) { + intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_DATA, data, 8); + data += 8; + } + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_TXRATE, &tx_rate, 1); +} + +static uint8_t intel_sdvo_calc_hbuf_csum(uint8_t *data, uint8_t size) +{ + uint8_t csum = 0; + int i; + + for (i = 0; i < size; i++) + csum += data[i]; + + return 0x100 - csum; +} + +#define DIP_TYPE_AVI 0x82 +#define DIP_VERSION_AVI 0x2 +#define DIP_LEN_AVI 13 + +struct dip_infoframe { + uint8_t type; + uint8_t version; + uint8_t len; + uint8_t checksum; + union { + struct { + /* Packet Byte #1 */ + uint8_t S:2; + uint8_t B:2; + uint8_t A:1; + uint8_t Y:2; + uint8_t rsvd1:1; + /* Packet Byte #2 */ + uint8_t R:4; + uint8_t M:2; + uint8_t C:2; + /* Packet Byte #3 */ + uint8_t SC:2; + uint8_t Q:2; + uint8_t EC:3; + uint8_t ITC:1; + /* Packet Byte #4 */ + uint8_t VIC:7; + uint8_t rsvd2:1; + /* Packet Byte #5 */ + uint8_t PR:4; + uint8_t rsvd3:4; + /* Packet Byte #6~13 */ + uint16_t top_bar_end; + uint16_t bottom_bar_start; + uint16_t left_bar_end; + uint16_t right_bar_start; + } avi; + struct { + /* Packet Byte #1 */ + uint8_t channel_count:3; + uint8_t rsvd1:1; + uint8_t coding_type:4; + /* Packet Byte #2 */ + uint8_t sample_size:2; /* SS0, SS1 */ + uint8_t sample_frequency:3; + uint8_t rsvd2:3; + /* Packet Byte #3 */ + uint8_t coding_type_private:5; + uint8_t rsvd3:3; + /* Packet Byte #4 */ + uint8_t channel_allocation; + /* Packet Byte #5 */ + uint8_t rsvd4:3; + uint8_t level_shift:4; + uint8_t downmix_inhibit:1; + } audio; + uint8_t payload[28]; + } __attribute__ ((packed)) u; +} __attribute__((packed)); + +static void intel_sdvo_set_avi_infoframe(struct intel_output *output, + struct drm_display_mode * mode) +{ + struct dip_infoframe avi_if = { + .type = DIP_TYPE_AVI, + .version = DIP_VERSION_AVI, + .len = DIP_LEN_AVI, + }; + + avi_if.checksum = intel_sdvo_calc_hbuf_csum((uint8_t *)&avi_if, + 4 + avi_if.len); + intel_sdvo_set_hdmi_buf(output, 1, (uint8_t *)&avi_if, 4 + avi_if.len, + SDVO_HBUF_TX_VSYNC); +} + +static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *output = enc_to_intel_output(encoder); + struct intel_sdvo_priv *dev_priv = output->dev_priv; - output_dtd.part2.sdvo_flags = 0; - output_dtd.part2.v_sync_off_high = v_sync_offset & 0xc0; - output_dtd.part2.reserved = 0; + if (!dev_priv->is_tv) { + /* Make the CRTC code factor in the SDVO pixel multiplier. The + * SDVO device will be told of the multiplier during mode_set. + */ + adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); + } else { + struct intel_sdvo_dtd output_dtd; + bool success; + + /* We need to construct preferred input timings based on our + * output timings. To do that, we have to set the output + * timings, even though this isn't really the right place in + * the sequence to do it. Oh well. + */ + + + /* Set output timings */ + intel_sdvo_get_dtd_from_mode(&output_dtd, mode); + intel_sdvo_set_target_output(output, + dev_priv->controlled_output); + intel_sdvo_set_output_timing(output, &output_dtd); + + /* Set the input timing to the screen. Assume always input 0. */ + intel_sdvo_set_target_input(output, true, false); + + + success = intel_sdvo_create_preferred_input_timing(output, + mode->clock / 10, + mode->hdisplay, + mode->vdisplay); + if (success) { + struct intel_sdvo_dtd input_dtd; - /* Set the output timing to the screen */ - intel_sdvo_set_target_output(intel_output, sdvo_priv->active_outputs); - intel_sdvo_set_output_timing(intel_output, &output_dtd); + intel_sdvo_get_preferred_input_timing(output, + &input_dtd); + intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd); + + } else { + return false; + } + } + return true; +} + +static void intel_sdvo_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = encoder->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_output *output = enc_to_intel_output(encoder); + struct intel_sdvo_priv *sdvo_priv = output->dev_priv; + u32 sdvox = 0; + int sdvo_pixel_multiply; + struct intel_sdvo_in_out_map in_out; + struct intel_sdvo_dtd input_dtd; + u8 status; + + if (!mode) + return; + + /* First, set the input mapping for the first input to our controlled + * output. This is only correct if we're a single-input device, in + * which case the first input is the output from the appropriate SDVO + * channel on the motherboard. In a two-input device, the first input + * will be SDVOB and the second SDVOC. + */ + in_out.in0 = sdvo_priv->controlled_output; + in_out.in1 = 0; + + intel_sdvo_write_cmd(output, SDVO_CMD_SET_IN_OUT_MAP, + &in_out, sizeof(in_out)); + status = intel_sdvo_read_response(output, NULL, 0); + + if (sdvo_priv->is_hdmi) { + intel_sdvo_set_avi_infoframe(output, mode); + sdvox |= SDVO_AUDIO_ENABLE; + } + + intel_sdvo_get_dtd_from_mode(&input_dtd, mode); + + /* If it's a TV, we already set the output timing in mode_fixup. + * Otherwise, the output timing is equal to the input timing. + */ + if (!sdvo_priv->is_tv) { + /* Set the output timing to the screen */ + intel_sdvo_set_target_output(output, + sdvo_priv->controlled_output); + intel_sdvo_set_output_timing(output, &input_dtd); + } /* Set the input timing to the screen. Assume always input 0. */ - intel_sdvo_set_target_input(intel_output, true, false); + intel_sdvo_set_target_input(output, true, false); - /* We would like to use i830_sdvo_create_preferred_input_timing() to + /* We would like to use intel_sdvo_create_preferred_input_timing() to * provide the device with a timing it can support, if it supports that * feature. However, presumably we would need to adjust the CRTC to * output the preferred timing, and we don't support that currently. */ - intel_sdvo_set_input_timing(intel_output, &output_dtd); +#if 0 + success = intel_sdvo_create_preferred_input_timing(output, clock, + width, height); + if (success) { + struct intel_sdvo_dtd *input_dtd; + + intel_sdvo_get_preferred_input_timing(output, &input_dtd); + intel_sdvo_set_input_timing(output, &input_dtd); + } +#else + intel_sdvo_set_input_timing(output, &input_dtd); +#endif switch (intel_sdvo_get_pixel_multiplier(mode)) { case 1: - intel_sdvo_set_clock_rate_mult(intel_output, + intel_sdvo_set_clock_rate_mult(output, SDVO_CLOCK_RATE_MULT_1X); break; case 2: - intel_sdvo_set_clock_rate_mult(intel_output, + intel_sdvo_set_clock_rate_mult(output, SDVO_CLOCK_RATE_MULT_2X); break; case 4: - intel_sdvo_set_clock_rate_mult(intel_output, + intel_sdvo_set_clock_rate_mult(output, SDVO_CLOCK_RATE_MULT_4X); break; } /* Set the SDVO control regs. */ - if (0/*IS_I965GM(dev)*/) { - sdvox = SDVO_BORDER_ENABLE; - } else { - sdvox = I915_READ(sdvo_priv->output_device); - switch (sdvo_priv->output_device) { - case SDVOB: - sdvox &= SDVOB_PRESERVE_MASK; - break; - case SDVOC: - sdvox &= SDVOC_PRESERVE_MASK; - break; - } - sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; - } + if (IS_I965G(dev)) { + sdvox |= SDVO_BORDER_ENABLE | + SDVO_VSYNC_ACTIVE_HIGH | + SDVO_HSYNC_ACTIVE_HIGH; + } else { + sdvox |= I915_READ(sdvo_priv->output_device); + switch (sdvo_priv->output_device) { + case SDVOB: + sdvox &= SDVOB_PRESERVE_MASK; + break; + case SDVOC: + sdvox &= SDVOC_PRESERVE_MASK; + break; + } + sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; + } if (intel_crtc->pipe == 1) sdvox |= SDVO_PIPE_B_SELECT; sdvo_pixel_multiply = intel_sdvo_get_pixel_multiplier(mode); if (IS_I965G(dev)) { - /* done in crtc_mode_set as the dpll_md reg must be written - early */ - } else if (IS_I945G(dev) || IS_I945GM(dev)) { - /* done in crtc_mode_set as it lives inside the - dpll register */ + /* done in crtc_mode_set as the dpll_md reg must be written early */ + } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) { + /* done in crtc_mode_set as it lives inside the dpll register */ } else { sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT; } - intel_sdvo_write_sdvox(intel_output, sdvox); + intel_sdvo_write_sdvox(output, sdvox); } static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode) @@ -714,7 +1137,7 @@ static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode) if (0) intel_sdvo_set_encoder_power_state(intel_output, mode); - intel_sdvo_set_active_outputs(intel_output, sdvo_priv->active_outputs); + intel_sdvo_set_active_outputs(intel_output, sdvo_priv->controlled_output); } return; } @@ -752,6 +1175,9 @@ static void intel_sdvo_save(struct drm_connector *connector) &sdvo_priv->save_output_dtd[o]); } } + if (sdvo_priv->is_tv) { + /* XXX: Save TV format/enhancements. */ + } sdvo_priv->save_SDVOX = I915_READ(sdvo_priv->output_device); } @@ -759,7 +1185,6 @@ static void intel_sdvo_save(struct drm_connector *connector) static void intel_sdvo_restore(struct drm_connector *connector) { struct drm_device *dev = connector->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_output *intel_output = to_intel_output(connector); struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; int o; @@ -790,7 +1215,11 @@ static void intel_sdvo_restore(struct drm_connector *connector) intel_sdvo_set_clock_rate_mult(intel_output, sdvo_priv->save_sdvo_mult); - I915_WRITE(sdvo_priv->output_device, sdvo_priv->save_SDVOX); + if (sdvo_priv->is_tv) { + /* XXX: Restore TV format/enhancements. */ + } + + intel_sdvo_write_sdvox(intel_output, sdvo_priv->save_SDVOX); if (sdvo_priv->save_SDVOX & SDVO_ENABLE) { @@ -916,20 +1345,173 @@ static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connect status = intel_sdvo_read_response(intel_output, &response, 2); DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]); + + if (status != SDVO_CMD_STATUS_SUCCESS) + return connector_status_unknown; + if ((response[0] != 0) || (response[1] != 0)) return connector_status_connected; else return connector_status_disconnected; } -static int intel_sdvo_get_modes(struct drm_connector *connector) +static void intel_sdvo_get_ddc_modes(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; /* set the bus switch and get the modes */ - intel_sdvo_set_control_bus_switch(intel_output, SDVO_CONTROL_BUS_DDC2); + intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); intel_ddc_get_modes(intel_output); +#if 0 + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + /* Mac mini hack. On this device, I get DDC through the analog, which + * load-detects as disconnected. I fail to DDC through the SDVO DDC, + * but it does load-detect as connected. So, just steal the DDC bits + * from analog when we fail at finding it the right way. + */ + crt = xf86_config->output[0]; + intel_output = crt->driver_private; + if (intel_output->type == I830_OUTPUT_ANALOG && + crt->funcs->detect(crt) == XF86OutputStatusDisconnected) { + I830I2CInit(pScrn, &intel_output->pDDCBus, GPIOA, "CRTDDC_A"); + edid_mon = xf86OutputGetEDID(crt, intel_output->pDDCBus); + xf86DestroyI2CBusRec(intel_output->pDDCBus, true, true); + } + if (edid_mon) { + xf86OutputSetEDID(output, edid_mon); + modes = xf86OutputGetEDIDModes(output); + } +#endif +} + +/** + * This function checks the current TV format, and chooses a default if + * it hasn't been set. + */ +static void +intel_sdvo_check_tv_format(struct intel_output *output) +{ + struct intel_sdvo_priv *dev_priv = output->dev_priv; + struct intel_sdvo_tv_format format, unset; + uint8_t status; + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_TV_FORMAT, NULL, 0); + status = intel_sdvo_read_response(output, &format, sizeof(format)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return; + + memset(&unset, 0, sizeof(unset)); + if (memcmp(&format, &unset, sizeof(format))) { + DRM_DEBUG("%s: Choosing default TV format of NTSC-M\n", + SDVO_NAME(dev_priv)); + + format.ntsc_m = true; + intel_sdvo_write_cmd(output, SDVO_CMD_SET_TV_FORMAT, NULL, 0); + status = intel_sdvo_read_response(output, NULL, 0); + } +} + +/* + * Set of SDVO TV modes. + * Note! This is in reply order (see loop in get_tv_modes). + * XXX: all 60Hz refresh? + */ +struct drm_display_mode sdvo_tv_modes[] = { + { DRM_MODE("320x200", DRM_MODE_TYPE_DRIVER, 5815680, 321, 384, 416, + 200, 0, 232, 201, 233, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("320x240", DRM_MODE_TYPE_DRIVER, 6814080, 321, 384, 416, + 240, 0, 272, 241, 273, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("400x300", DRM_MODE_TYPE_DRIVER, 9910080, 401, 464, 496, + 300, 0, 332, 301, 333, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 16913280, 641, 704, 736, + 350, 0, 382, 351, 383, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 19121280, 641, 704, 736, + 400, 0, 432, 401, 433, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 19121280, 641, 704, 736, + 400, 0, 432, 401, 433, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("704x480", DRM_MODE_TYPE_DRIVER, 24624000, 705, 768, 800, + 480, 0, 512, 481, 513, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("704x576", DRM_MODE_TYPE_DRIVER, 29232000, 705, 768, 800, + 576, 0, 608, 577, 609, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x350", DRM_MODE_TYPE_DRIVER, 18751680, 721, 784, 816, + 350, 0, 382, 351, 383, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 21199680, 721, 784, 816, + 400, 0, 432, 401, 433, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 25116480, 721, 784, 816, + 480, 0, 512, 481, 513, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x540", DRM_MODE_TYPE_DRIVER, 28054080, 721, 784, 816, + 540, 0, 572, 541, 573, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 29816640, 721, 784, 816, + 576, 0, 608, 577, 609, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("768x576", DRM_MODE_TYPE_DRIVER, 31570560, 769, 832, 864, + 576, 0, 608, 577, 609, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 34030080, 801, 864, 896, + 600, 0, 632, 601, 633, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 36581760, 833, 896, 928, + 624, 0, 656, 625, 657, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("920x766", DRM_MODE_TYPE_DRIVER, 48707040, 921, 984, 1016, + 766, 0, 798, 767, 799, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 53827200, 1025, 1088, 1120, + 768, 0, 800, 769, 801, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 87265920, 1281, 1344, 1376, + 1024, 0, 1056, 1025, 1057, 4196112, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, +}; + +static void intel_sdvo_get_tv_modes(struct drm_connector *connector) +{ + struct intel_output *output = to_intel_output(connector); + uint32_t reply = 0; + uint8_t status; + int i = 0; + + intel_sdvo_check_tv_format(output); + + /* Read the list of supported input resolutions for the selected TV + * format. + */ + intel_sdvo_write_cmd(output, SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT, + NULL, 0); + status = intel_sdvo_read_response(output, &reply, 3); + if (status != SDVO_CMD_STATUS_SUCCESS) + return; + + for (i = 0; i < ARRAY_SIZE(sdvo_tv_modes); i++) + if (reply & (1 << i)) + drm_mode_probed_add(connector, &sdvo_tv_modes[i]); +} + +static int intel_sdvo_get_modes(struct drm_connector *connector) +{ + struct intel_output *output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = output->dev_priv; + + if (sdvo_priv->is_tv) + intel_sdvo_get_tv_modes(connector); + else + intel_sdvo_get_ddc_modes(connector); + if (list_empty(&connector->probed_modes)) return 0; return 1; @@ -978,6 +1560,65 @@ static const struct drm_encoder_funcs intel_sdvo_enc_funcs = { }; +/** + * Choose the appropriate DDC bus for control bus switch command for this + * SDVO output based on the controlled output. + * + * DDC bus number assignment is in a priority order of RGB outputs, then TMDS + * outputs, then LVDS outputs. + */ +static void +intel_sdvo_select_ddc_bus(struct intel_sdvo_priv *dev_priv) +{ + uint16_t mask = 0; + unsigned int num_bits; + + /* Make a mask of outputs less than or equal to our own priority in the + * list. + */ + switch (dev_priv->controlled_output) { + case SDVO_OUTPUT_LVDS1: + mask |= SDVO_OUTPUT_LVDS1; + case SDVO_OUTPUT_LVDS0: + mask |= SDVO_OUTPUT_LVDS0; + case SDVO_OUTPUT_TMDS1: + mask |= SDVO_OUTPUT_TMDS1; + case SDVO_OUTPUT_TMDS0: + mask |= SDVO_OUTPUT_TMDS0; + case SDVO_OUTPUT_RGB1: + mask |= SDVO_OUTPUT_RGB1; + case SDVO_OUTPUT_RGB0: + mask |= SDVO_OUTPUT_RGB0; + break; + } + + /* Count bits to find what number we are in the priority list. */ + mask &= dev_priv->caps.output_flags; + num_bits = hweight16(mask); + if (num_bits > 3) { + /* if more than 3 outputs, default to DDC bus 3 for now */ + num_bits = 3; + } + + /* Corresponds to SDVO_CONTROL_BUS_DDCx */ + dev_priv->ddc_bus = 1 << num_bits; +} + +static bool +intel_sdvo_get_digital_encoding_mode(struct intel_output *output) +{ + struct intel_sdvo_priv *sdvo_priv = output->dev_priv; + uint8_t status; + + intel_sdvo_set_target_output(output, sdvo_priv->controlled_output); + + intel_sdvo_write_cmd(output, SDVO_CMD_GET_ENCODE, NULL, 0); + status = intel_sdvo_read_response(output, &sdvo_priv->is_hdmi, 1); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + return true; +} + bool intel_sdvo_init(struct drm_device *dev, int output_device) { struct drm_connector *connector; @@ -1040,45 +1681,76 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); - memset(&sdvo_priv->active_outputs, 0, sizeof(sdvo_priv->active_outputs)); + if (sdvo_priv->caps.output_flags & + (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) { + if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0) + sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS0; + else + sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1; + + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_TMDS; + connector_type = DRM_MODE_CONNECTOR_DVID; - /* TODO, CVBS, SVID, YPRPB & SCART outputs. */ - if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) + if (intel_sdvo_get_supp_encode(intel_output, + &sdvo_priv->encode) && + intel_sdvo_get_digital_encoding_mode(intel_output) && + sdvo_priv->is_hdmi) { + /* enable hdmi encoding mode if supported */ + intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI); + intel_sdvo_set_colorimetry(intel_output, + SDVO_COLORIMETRY_RGB256); + connector_type = DRM_MODE_CONNECTOR_HDMIA; + } + } + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0) { - sdvo_priv->active_outputs = SDVO_OUTPUT_RGB0; + sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_TVDAC; + connector_type = DRM_MODE_CONNECTOR_SVIDEO; + sdvo_priv->is_tv = true; + intel_output->needs_tv_clock = true; + } + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) + { + sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0; connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_DAC; connector_type = DRM_MODE_CONNECTOR_VGA; } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1) { - sdvo_priv->active_outputs = SDVO_OUTPUT_RGB1; + sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1; connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_DAC; connector_type = DRM_MODE_CONNECTOR_VGA; } - else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0) + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0) { - sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS0; + sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0; connector->display_info.subpixel_order = SubPixelHorizontalRGB; - encoder_type = DRM_MODE_ENCODER_TMDS; - connector_type = DRM_MODE_CONNECTOR_DVID; + encoder_type = DRM_MODE_ENCODER_LVDS; + connector_type = DRM_MODE_CONNECTOR_LVDS; } - else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1) + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1) { - sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS1; + sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1; connector->display_info.subpixel_order = SubPixelHorizontalRGB; - encoder_type = DRM_MODE_ENCODER_TMDS; - connector_type = DRM_MODE_CONNECTOR_DVID; + encoder_type = DRM_MODE_ENCODER_LVDS; + connector_type = DRM_MODE_CONNECTOR_LVDS; } else { unsigned char bytes[2]; + sdvo_priv->controlled_output = 0; memcpy (bytes, &sdvo_priv->caps.output_flags, 2); - DRM_DEBUG("%s: No active RGB or TMDS outputs (0x%02x%02x)\n", + DRM_DEBUG("%s: Unknown SDVO output type (0x%02x%02x)\n", SDVO_NAME(sdvo_priv), bytes[0], bytes[1]); + encoder_type = DRM_MODE_ENCODER_NONE; + connector_type = DRM_MODE_CONNECTOR_Unknown; goto err_i2c; } @@ -1089,6 +1761,8 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); drm_sysfs_connector_add(connector); + intel_sdvo_select_ddc_bus(sdvo_priv); + /* Set the input timing to the screen. Assume always input 0. */ intel_sdvo_set_target_input(intel_output, true, false); diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h index 861a43f..1117b9c 100644 --- a/drivers/gpu/drm/i915/intel_sdvo_regs.h +++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h @@ -173,6 +173,9 @@ struct intel_sdvo_get_trained_inputs_response { * Returns two struct intel_sdvo_output_flags structures. */ #define SDVO_CMD_GET_IN_OUT_MAP 0x06 +struct intel_sdvo_in_out_map { + u16 in0, in1; +}; /** * Sets the current mapping of SDVO inputs to outputs on the device. @@ -206,7 +209,8 @@ struct intel_sdvo_get_trained_inputs_response { struct intel_sdvo_get_interrupt_event_source_response { u16 interrupt_status; unsigned int ambient_light_interrupt:1; - unsigned int pad:7; + unsigned int hdmi_audio_encrypt_change:1; + unsigned int pad:6; } __attribute__((packed)); /** @@ -305,23 +309,411 @@ struct intel_sdvo_set_target_input_args { # define SDVO_CLOCK_RATE_MULT_4X (1 << 3) #define SDVO_CMD_GET_SUPPORTED_TV_FORMATS 0x27 +/** 5 bytes of bit flags for TV formats shared by all TV format functions */ +struct intel_sdvo_tv_format { + unsigned int ntsc_m:1; + unsigned int ntsc_j:1; + unsigned int ntsc_443:1; + unsigned int pal_b:1; + unsigned int pal_d:1; + unsigned int pal_g:1; + unsigned int pal_h:1; + unsigned int pal_i:1; + + unsigned int pal_m:1; + unsigned int pal_n:1; + unsigned int pal_nc:1; + unsigned int pal_60:1; + unsigned int secam_b:1; + unsigned int secam_d:1; + unsigned int secam_g:1; + unsigned int secam_k:1; + + unsigned int secam_k1:1; + unsigned int secam_l:1; + unsigned int secam_60:1; + unsigned int hdtv_std_smpte_240m_1080i_59:1; + unsigned int hdtv_std_smpte_240m_1080i_60:1; + unsigned int hdtv_std_smpte_260m_1080i_59:1; + unsigned int hdtv_std_smpte_260m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080i_50:1; + + unsigned int hdtv_std_smpte_274m_1080i_59:1; + unsigned int hdtv_std_smpte_274m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080p_23:1; + unsigned int hdtv_std_smpte_274m_1080p_24:1; + unsigned int hdtv_std_smpte_274m_1080p_25:1; + unsigned int hdtv_std_smpte_274m_1080p_29:1; + unsigned int hdtv_std_smpte_274m_1080p_30:1; + unsigned int hdtv_std_smpte_274m_1080p_50:1; + + unsigned int hdtv_std_smpte_274m_1080p_59:1; + unsigned int hdtv_std_smpte_274m_1080p_60:1; + unsigned int hdtv_std_smpte_295m_1080i_50:1; + unsigned int hdtv_std_smpte_295m_1080p_50:1; + unsigned int hdtv_std_smpte_296m_720p_59:1; + unsigned int hdtv_std_smpte_296m_720p_60:1; + unsigned int hdtv_std_smpte_296m_720p_50:1; + unsigned int hdtv_std_smpte_293m_480p_59:1; + + unsigned int hdtv_std_smpte_170m_480i_59:1; + unsigned int hdtv_std_iturbt601_576i_50:1; + unsigned int hdtv_std_iturbt601_576p_50:1; + unsigned int hdtv_std_eia_7702a_480i_60:1; + unsigned int hdtv_std_eia_7702a_480p_60:1; + unsigned int pad:3; +} __attribute__((packed)); #define SDVO_CMD_GET_TV_FORMAT 0x28 #define SDVO_CMD_SET_TV_FORMAT 0x29 +/** Returns the resolutiosn that can be used with the given TV format */ +#define SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT 0x83 +struct intel_sdvo_sdtv_resolution_request { + unsigned int ntsc_m:1; + unsigned int ntsc_j:1; + unsigned int ntsc_443:1; + unsigned int pal_b:1; + unsigned int pal_d:1; + unsigned int pal_g:1; + unsigned int pal_h:1; + unsigned int pal_i:1; + + unsigned int pal_m:1; + unsigned int pal_n:1; + unsigned int pal_nc:1; + unsigned int pal_60:1; + unsigned int secam_b:1; + unsigned int secam_d:1; + unsigned int secam_g:1; + unsigned int secam_k:1; + + unsigned int secam_k1:1; + unsigned int secam_l:1; + unsigned int secam_60:1; + unsigned int pad:5; +} __attribute__((packed)); + +struct intel_sdvo_sdtv_resolution_reply { + unsigned int res_320x200:1; + unsigned int res_320x240:1; + unsigned int res_400x300:1; + unsigned int res_640x350:1; + unsigned int res_640x400:1; + unsigned int res_640x480:1; + unsigned int res_704x480:1; + unsigned int res_704x576:1; + + unsigned int res_720x350:1; + unsigned int res_720x400:1; + unsigned int res_720x480:1; + unsigned int res_720x540:1; + unsigned int res_720x576:1; + unsigned int res_768x576:1; + unsigned int res_800x600:1; + unsigned int res_832x624:1; + + unsigned int res_920x766:1; + unsigned int res_1024x768:1; + unsigned int res_1280x1024:1; + unsigned int pad:5; +} __attribute__((packed)); + +/* Get supported resolution with squire pixel aspect ratio that can be + scaled for the requested HDTV format */ +#define SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT 0x85 + +struct intel_sdvo_hdtv_resolution_request { + unsigned int hdtv_std_smpte_240m_1080i_59:1; + unsigned int hdtv_std_smpte_240m_1080i_60:1; + unsigned int hdtv_std_smpte_260m_1080i_59:1; + unsigned int hdtv_std_smpte_260m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080i_50:1; + unsigned int hdtv_std_smpte_274m_1080i_59:1; + unsigned int hdtv_std_smpte_274m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080p_23:1; + + unsigned int hdtv_std_smpte_274m_1080p_24:1; + unsigned int hdtv_std_smpte_274m_1080p_25:1; + unsigned int hdtv_std_smpte_274m_1080p_29:1; + unsigned int hdtv_std_smpte_274m_1080p_30:1; + unsigned int hdtv_std_smpte_274m_1080p_50:1; + unsigned int hdtv_std_smpte_274m_1080p_59:1; + unsigned int hdtv_std_smpte_274m_1080p_60:1; + unsigned int hdtv_std_smpte_295m_1080i_50:1; + + unsigned int hdtv_std_smpte_295m_1080p_50:1; + unsigned int hdtv_std_smpte_296m_720p_59:1; + unsigned int hdtv_std_smpte_296m_720p_60:1; + unsigned int hdtv_std_smpte_296m_720p_50:1; + unsigned int hdtv_std_smpte_293m_480p_59:1; + unsigned int hdtv_std_smpte_170m_480i_59:1; + unsigned int hdtv_std_iturbt601_576i_50:1; + unsigned int hdtv_std_iturbt601_576p_50:1; + + unsigned int hdtv_std_eia_7702a_480i_60:1; + unsigned int hdtv_std_eia_7702a_480p_60:1; + unsigned int pad:6; +} __attribute__((packed)); + +struct intel_sdvo_hdtv_resolution_reply { + unsigned int res_640x480:1; + unsigned int res_800x600:1; + unsigned int res_1024x768:1; + unsigned int res_1280x960:1; + unsigned int res_1400x1050:1; + unsigned int res_1600x1200:1; + unsigned int res_1920x1440:1; + unsigned int res_2048x1536:1; + + unsigned int res_2560x1920:1; + unsigned int res_3200x2400:1; + unsigned int res_3840x2880:1; + unsigned int pad1:5; + + unsigned int res_848x480:1; + unsigned int res_1064x600:1; + unsigned int res_1280x720:1; + unsigned int res_1360x768:1; + unsigned int res_1704x960:1; + unsigned int res_1864x1050:1; + unsigned int res_1920x1080:1; + unsigned int res_2128x1200:1; + + unsigned int res_2560x1400:1; + unsigned int res_2728x1536:1; + unsigned int res_3408x1920:1; + unsigned int res_4264x2400:1; + unsigned int res_5120x2880:1; + unsigned int pad2:3; + + unsigned int res_768x480:1; + unsigned int res_960x600:1; + unsigned int res_1152x720:1; + unsigned int res_1124x768:1; + unsigned int res_1536x960:1; + unsigned int res_1680x1050:1; + unsigned int res_1728x1080:1; + unsigned int res_1920x1200:1; + + unsigned int res_2304x1440:1; + unsigned int res_2456x1536:1; + unsigned int res_3072x1920:1; + unsigned int res_3840x2400:1; + unsigned int res_4608x2880:1; + unsigned int pad3:3; + + unsigned int res_1280x1024:1; + unsigned int pad4:7; + + unsigned int res_1280x768:1; + unsigned int pad5:7; +} __attribute__((packed)); + +/* Get supported power state returns info for encoder and monitor, rely on + last SetTargetInput and SetTargetOutput calls */ #define SDVO_CMD_GET_SUPPORTED_POWER_STATES 0x2a +/* Get power state returns info for encoder and monitor, rely on last + SetTargetInput and SetTargetOutput calls */ +#define SDVO_CMD_GET_POWER_STATE 0x2b #define SDVO_CMD_GET_ENCODER_POWER_STATE 0x2b #define SDVO_CMD_SET_ENCODER_POWER_STATE 0x2c # define SDVO_ENCODER_STATE_ON (1 << 0) # define SDVO_ENCODER_STATE_STANDBY (1 << 1) # define SDVO_ENCODER_STATE_SUSPEND (1 << 2) # define SDVO_ENCODER_STATE_OFF (1 << 3) +# define SDVO_MONITOR_STATE_ON (1 << 4) +# define SDVO_MONITOR_STATE_STANDBY (1 << 5) +# define SDVO_MONITOR_STATE_SUSPEND (1 << 6) +# define SDVO_MONITOR_STATE_OFF (1 << 7) + +#define SDVO_CMD_GET_MAX_PANEL_POWER_SEQUENCING 0x2d +#define SDVO_CMD_GET_PANEL_POWER_SEQUENCING 0x2e +#define SDVO_CMD_SET_PANEL_POWER_SEQUENCING 0x2f +/** + * The panel power sequencing parameters are in units of milliseconds. + * The high fields are bits 8:9 of the 10-bit values. + */ +struct sdvo_panel_power_sequencing { + u8 t0; + u8 t1; + u8 t2; + u8 t3; + u8 t4; + + unsigned int t0_high:2; + unsigned int t1_high:2; + unsigned int t2_high:2; + unsigned int t3_high:2; + + unsigned int t4_high:2; + unsigned int pad:6; +} __attribute__((packed)); + +#define SDVO_CMD_GET_MAX_BACKLIGHT_LEVEL 0x30 +struct sdvo_max_backlight_reply { + u8 max_value; + u8 default_value; +} __attribute__((packed)); + +#define SDVO_CMD_GET_BACKLIGHT_LEVEL 0x31 +#define SDVO_CMD_SET_BACKLIGHT_LEVEL 0x32 + +#define SDVO_CMD_GET_AMBIENT_LIGHT 0x33 +struct sdvo_get_ambient_light_reply { + u16 trip_low; + u16 trip_high; + u16 value; +} __attribute__((packed)); +#define SDVO_CMD_SET_AMBIENT_LIGHT 0x34 +struct sdvo_set_ambient_light_reply { + u16 trip_low; + u16 trip_high; + unsigned int enable:1; + unsigned int pad:7; +} __attribute__((packed)); + +/* Set display power state */ +#define SDVO_CMD_SET_DISPLAY_POWER_STATE 0x7d +# define SDVO_DISPLAY_STATE_ON (1 << 0) +# define SDVO_DISPLAY_STATE_STANDBY (1 << 1) +# define SDVO_DISPLAY_STATE_SUSPEND (1 << 2) +# define SDVO_DISPLAY_STATE_OFF (1 << 3) + +#define SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS 0x84 +struct intel_sdvo_enhancements_reply { + unsigned int flicker_filter:1; + unsigned int flicker_filter_adaptive:1; + unsigned int flicker_filter_2d:1; + unsigned int saturation:1; + unsigned int hue:1; + unsigned int brightness:1; + unsigned int contrast:1; + unsigned int overscan_h:1; + + unsigned int overscan_v:1; + unsigned int position_h:1; + unsigned int position_v:1; + unsigned int sharpness:1; + unsigned int dot_crawl:1; + unsigned int dither:1; + unsigned int max_tv_chroma_filter:1; + unsigned int max_tv_luma_filter:1; +} __attribute__((packed)); + +/* Picture enhancement limits below are dependent on the current TV format, + * and thus need to be queried and set after it. + */ +#define SDVO_CMD_GET_MAX_FLICKER_FITER 0x4d +#define SDVO_CMD_GET_MAX_ADAPTIVE_FLICKER_FITER 0x7b +#define SDVO_CMD_GET_MAX_2D_FLICKER_FITER 0x52 +#define SDVO_CMD_GET_MAX_SATURATION 0x55 +#define SDVO_CMD_GET_MAX_HUE 0x58 +#define SDVO_CMD_GET_MAX_BRIGHTNESS 0x5b +#define SDVO_CMD_GET_MAX_CONTRAST 0x5e +#define SDVO_CMD_GET_MAX_OVERSCAN_H 0x61 +#define SDVO_CMD_GET_MAX_OVERSCAN_V 0x64 +#define SDVO_CMD_GET_MAX_POSITION_H 0x67 +#define SDVO_CMD_GET_MAX_POSITION_V 0x6a +#define SDVO_CMD_GET_MAX_SHARPNESS_V 0x6d +#define SDVO_CMD_GET_MAX_TV_CHROMA 0x74 +#define SDVO_CMD_GET_MAX_TV_LUMA 0x77 +struct intel_sdvo_enhancement_limits_reply { + u16 max_value; + u16 default_value; +} __attribute__((packed)); -#define SDVO_CMD_SET_TV_RESOLUTION_SUPPORT 0x93 +#define SDVO_CMD_GET_LVDS_PANEL_INFORMATION 0x7f +#define SDVO_CMD_SET_LVDS_PANEL_INFORMATION 0x80 +# define SDVO_LVDS_COLOR_DEPTH_18 (0 << 0) +# define SDVO_LVDS_COLOR_DEPTH_24 (1 << 0) +# define SDVO_LVDS_CONNECTOR_SPWG (0 << 2) +# define SDVO_LVDS_CONNECTOR_OPENLDI (1 << 2) +# define SDVO_LVDS_SINGLE_CHANNEL (0 << 4) +# define SDVO_LVDS_DUAL_CHANNEL (1 << 4) + +#define SDVO_CMD_GET_FLICKER_FILTER 0x4e +#define SDVO_CMD_SET_FLICKER_FILTER 0x4f +#define SDVO_CMD_GET_ADAPTIVE_FLICKER_FITER 0x50 +#define SDVO_CMD_SET_ADAPTIVE_FLICKER_FITER 0x51 +#define SDVO_CMD_GET_2D_FLICKER_FITER 0x53 +#define SDVO_CMD_SET_2D_FLICKER_FITER 0x54 +#define SDVO_CMD_GET_SATURATION 0x56 +#define SDVO_CMD_SET_SATURATION 0x57 +#define SDVO_CMD_GET_HUE 0x59 +#define SDVO_CMD_SET_HUE 0x5a +#define SDVO_CMD_GET_BRIGHTNESS 0x5c +#define SDVO_CMD_SET_BRIGHTNESS 0x5d +#define SDVO_CMD_GET_CONTRAST 0x5f +#define SDVO_CMD_SET_CONTRAST 0x60 +#define SDVO_CMD_GET_OVERSCAN_H 0x62 +#define SDVO_CMD_SET_OVERSCAN_H 0x63 +#define SDVO_CMD_GET_OVERSCAN_V 0x65 +#define SDVO_CMD_SET_OVERSCAN_V 0x66 +#define SDVO_CMD_GET_POSITION_H 0x68 +#define SDVO_CMD_SET_POSITION_H 0x69 +#define SDVO_CMD_GET_POSITION_V 0x6b +#define SDVO_CMD_SET_POSITION_V 0x6c +#define SDVO_CMD_GET_SHARPNESS 0x6e +#define SDVO_CMD_SET_SHARPNESS 0x6f +#define SDVO_CMD_GET_TV_CHROMA 0x75 +#define SDVO_CMD_SET_TV_CHROMA 0x76 +#define SDVO_CMD_GET_TV_LUMA 0x78 +#define SDVO_CMD_SET_TV_LUMA 0x79 +struct intel_sdvo_enhancements_arg { + u16 value; +}__attribute__((packed)); + +#define SDVO_CMD_GET_DOT_CRAWL 0x70 +#define SDVO_CMD_SET_DOT_CRAWL 0x71 +# define SDVO_DOT_CRAWL_ON (1 << 0) +# define SDVO_DOT_CRAWL_DEFAULT_ON (1 << 1) + +#define SDVO_CMD_GET_DITHER 0x72 +#define SDVO_CMD_SET_DITHER 0x73 +# define SDVO_DITHER_ON (1 << 0) +# define SDVO_DITHER_DEFAULT_ON (1 << 1) #define SDVO_CMD_SET_CONTROL_BUS_SWITCH 0x7a -# define SDVO_CONTROL_BUS_PROM 0x0 -# define SDVO_CONTROL_BUS_DDC1 0x1 -# define SDVO_CONTROL_BUS_DDC2 0x2 -# define SDVO_CONTROL_BUS_DDC3 0x3 +# define SDVO_CONTROL_BUS_PROM (1 << 0) +# define SDVO_CONTROL_BUS_DDC1 (1 << 1) +# define SDVO_CONTROL_BUS_DDC2 (1 << 2) +# define SDVO_CONTROL_BUS_DDC3 (1 << 3) + +/* HDMI op codes */ +#define SDVO_CMD_GET_SUPP_ENCODE 0x9d +#define SDVO_CMD_GET_ENCODE 0x9e +#define SDVO_CMD_SET_ENCODE 0x9f + #define SDVO_ENCODE_DVI 0x0 + #define SDVO_ENCODE_HDMI 0x1 +#define SDVO_CMD_SET_PIXEL_REPLI 0x8b +#define SDVO_CMD_GET_PIXEL_REPLI 0x8c +#define SDVO_CMD_GET_COLORIMETRY_CAP 0x8d +#define SDVO_CMD_SET_COLORIMETRY 0x8e + #define SDVO_COLORIMETRY_RGB256 0x0 + #define SDVO_COLORIMETRY_RGB220 0x1 + #define SDVO_COLORIMETRY_YCrCb422 0x3 + #define SDVO_COLORIMETRY_YCrCb444 0x4 +#define SDVO_CMD_GET_COLORIMETRY 0x8f +#define SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER 0x90 +#define SDVO_CMD_SET_AUDIO_STAT 0x91 +#define SDVO_CMD_GET_AUDIO_STAT 0x92 +#define SDVO_CMD_SET_HBUF_INDEX 0x93 +#define SDVO_CMD_GET_HBUF_INDEX 0x94 +#define SDVO_CMD_GET_HBUF_INFO 0x95 +#define SDVO_CMD_SET_HBUF_AV_SPLIT 0x96 +#define SDVO_CMD_GET_HBUF_AV_SPLIT 0x97 +#define SDVO_CMD_SET_HBUF_DATA 0x98 +#define SDVO_CMD_GET_HBUF_DATA 0x99 +#define SDVO_CMD_SET_HBUF_TXRATE 0x9a +#define SDVO_CMD_GET_HBUF_TXRATE 0x9b + #define SDVO_HBUF_TX_DISABLED (0 << 6) + #define SDVO_HBUF_TX_ONCE (2 << 6) + #define SDVO_HBUF_TX_VSYNC (3 << 6) +#define SDVO_CMD_GET_AUDIO_TX_INFO 0x9c + +struct intel_sdvo_encode{ + u8 dvi_rev; + u8 hdmi_rev; +} __attribute__ ((packed)); diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index fbb35dc..56485d6 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -411,7 +411,7 @@ struct tv_mode { * These values account for -1s required. */ -const static struct tv_mode tv_modes[] = { +static const struct tv_mode tv_modes[] = { { .name = "NTSC-M", .clock = 107520, diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 63212d7..92965db 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -557,8 +557,10 @@ static int radeon_do_engine_reset(struct drm_device * dev) } static void radeon_cp_init_ring_buffer(struct drm_device * dev, - drm_radeon_private_t * dev_priv) + drm_radeon_private_t *dev_priv, + struct drm_file *file_priv) { + struct drm_radeon_master_private *master_priv; u32 ring_start, cur_read_ptr; u32 tmp; @@ -677,6 +679,14 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, dev_priv->scratch[2] = 0; RADEON_WRITE(RADEON_LAST_CLEAR_REG, 0); + /* reset sarea copies of these */ + master_priv = file_priv->master->driver_priv; + if (master_priv->sarea_priv) { + master_priv->sarea_priv->last_frame = 0; + master_priv->sarea_priv->last_dispatch = 0; + master_priv->sarea_priv->last_clear = 0; + } + radeon_do_wait_for_idle(dev_priv); /* Sync everything up */ @@ -1039,9 +1049,9 @@ static int radeon_do_init_cp(struct drm_device *dev, drm_radeon_init_t *init, #if __OS_HAS_AGP if (dev_priv->flags & RADEON_IS_AGP) { - drm_core_ioremap(dev_priv->cp_ring, dev); - drm_core_ioremap(dev_priv->ring_rptr, dev); - drm_core_ioremap(dev->agp_buffer_map, dev); + drm_core_ioremap_wc(dev_priv->cp_ring, dev); + drm_core_ioremap_wc(dev_priv->ring_rptr, dev); + drm_core_ioremap_wc(dev->agp_buffer_map, dev); if (!dev_priv->cp_ring->handle || !dev_priv->ring_rptr->handle || !dev->agp_buffer_map->handle) { @@ -1215,7 +1225,7 @@ static int radeon_do_init_cp(struct drm_device *dev, drm_radeon_init_t *init, } radeon_cp_load_microcode(dev_priv); - radeon_cp_init_ring_buffer(dev, dev_priv); + radeon_cp_init_ring_buffer(dev, dev_priv, file_priv); dev_priv->last_buf = 0; @@ -1281,7 +1291,7 @@ static int radeon_do_cleanup_cp(struct drm_device * dev) * * Charl P. Botha <http://cpbotha.net> */ -static int radeon_do_resume_cp(struct drm_device * dev) +static int radeon_do_resume_cp(struct drm_device *dev, struct drm_file *file_priv) { drm_radeon_private_t *dev_priv = dev->dev_private; @@ -1304,7 +1314,7 @@ static int radeon_do_resume_cp(struct drm_device * dev) } radeon_cp_load_microcode(dev_priv); - radeon_cp_init_ring_buffer(dev, dev_priv); + radeon_cp_init_ring_buffer(dev, dev_priv, file_priv); radeon_do_engine_reset(dev); radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1); @@ -1479,8 +1489,7 @@ int radeon_cp_idle(struct drm_device *dev, void *data, struct drm_file *file_pri */ int radeon_cp_resume(struct drm_device *dev, void *data, struct drm_file *file_priv) { - - return radeon_do_resume_cp(dev); + return radeon_do_resume_cp(dev, file_priv); } int radeon_engine_reset(struct drm_device *dev, void *data, struct drm_file *file_priv) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 6cad69e..1cc9674 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1300,7 +1300,13 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) }, @@ -1605,6 +1611,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) }, { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) }, + { HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) }, @@ -1612,10 +1619,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, @@ -1626,8 +1629,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) }, { HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) }, - { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, - { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, { } }; diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e899f51..8851197 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -348,6 +348,9 @@ #define USB_VENDOR_ID_PLAYDOTCOM 0x0b43 #define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII 0x0003 +#define USB_VENDOR_ID_POWERCOM 0x0d9f +#define USB_DEVICE_ID_POWERCOM_UPS 0x0002 + #define USB_VENDOR_ID_SAITEK 0x06a3 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17 diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 7324496..02b19db 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -267,8 +267,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, default: { struct hid_device *hid = dev->hid; - if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) - return -EINVAL; + if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) { + ret = -EINVAL; + break; + } if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) { int len; @@ -277,8 +279,9 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, len = strlen(hid->name) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); - return copy_to_user(user_arg, hid->name, len) ? + ret = copy_to_user(user_arg, hid->name, len) ? -EFAULT : len; + break; } if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) { @@ -288,12 +291,13 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, len = strlen(hid->phys) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); - return copy_to_user(user_arg, hid->phys, len) ? + ret = copy_to_user(user_arg, hid->phys, len) ? -EFAULT : len; + break; } } - ret = -ENOTTY; + ret = -ENOTTY; } unlock_kernel(); return ret; diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 609caff..5f81ddf 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -1872,7 +1872,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address, devid = superio_inw(sioaddr, SIO_REG_MANID); if (devid != SIO_FINTEK_ID) { - printk(KERN_INFO DRVNAME ": Not a Fintek device\n"); + pr_debug(DRVNAME ": Not a Fintek device\n"); goto exit; } @@ -1932,7 +1932,7 @@ static int __init f71882fg_device_add(unsigned short address, res.name = f71882fg_pdev->name; err = acpi_check_resource_conflict(&res); if (err) - return err; + goto exit_device_put; err = platform_device_add_resources(f71882fg_pdev, &res, 1); if (err) { diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index 0370524..29c83b5 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -153,7 +153,10 @@ static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3}; static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3}; static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3}; static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3}; +static struct axis_conversion lis3lv02d_axis_xy_rotated_left_usd = {-2, 1, -3}; static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3}; +static struct axis_conversion lis3lv02d_axis_xy_rotated_right = {2, -1, 3}; +static struct axis_conversion lis3lv02d_axis_xy_swap_yz_inverted = {2, -1, -3}; #define AXIS_DMI_MATCH(_ident, _name, _axis) { \ .ident = _ident, \ @@ -163,6 +166,18 @@ static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3}; }, \ .driver_data = &lis3lv02d_axis_##_axis \ } + +#define AXIS_DMI_MATCH2(_ident, _class1, _name1, \ + _class2, _name2, \ + _axis) { \ + .ident = _ident, \ + .callback = lis3lv02d_dmi_matched, \ + .matches = { \ + DMI_MATCH(DMI_##_class1, _name1), \ + DMI_MATCH(DMI_##_class2, _name2), \ + }, \ + .driver_data = &lis3lv02d_axis_##_axis \ +} static struct dmi_system_id lis3lv02d_dmi_ids[] = { /* product names are truncated to match all kinds of a same model */ AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted), @@ -172,10 +187,22 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted), AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted), AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), + AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd), + AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd), + AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right), + AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted), + /* Intel-based HP Pavilion dv5 */ + AXIS_DMI_MATCH2("HPDV5_I", + PRODUCT_NAME, "HP Pavilion dv5", + BOARD_NAME, "3603", + x_inverted), + /* AMD-based HP Pavilion dv5 */ + AXIS_DMI_MATCH2("HPDV5_A", + PRODUCT_NAME, "HP Pavilion dv5", + BOARD_NAME, "3600", + y_inverted), { NULL, } /* Laptop models without axis info (yet): - * "NC651xx" "HP Compaq 651" - * "NC671xx" "HP Compaq 671" * "NC6910" "HP Compaq 6910" * HP Compaq 8710x Notebook PC / Mobile Workstation * "NC2400" "HP Compaq nc2400" @@ -208,9 +235,49 @@ static struct delayed_led_classdev hpled_led = { .set_brightness = hpled_set, }; +static acpi_status +lis3lv02d_get_resource(struct acpi_resource *resource, void *context) +{ + if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) { + struct acpi_resource_extended_irq *irq; + u32 *device_irq = context; + + irq = &resource->data.extended_irq; + *device_irq = irq->interrupts[0]; + } + + return AE_OK; +} + +static void lis3lv02d_enum_resources(struct acpi_device *device) +{ + acpi_status status; + + status = acpi_walk_resources(device->handle, METHOD_NAME__CRS, + lis3lv02d_get_resource, &adev.irq); + if (ACPI_FAILURE(status)) + printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n"); +} + +static s16 lis3lv02d_read_16(acpi_handle handle, int reg) +{ + u8 lo, hi; + + adev.read(handle, reg - 1, &lo); + adev.read(handle, reg, &hi); + /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ + return (s16)((hi << 8) | lo); +} + +static s16 lis3lv02d_read_8(acpi_handle handle, int reg) +{ + s8 lo; + adev.read(handle, reg, &lo); + return lo; +} + static int lis3lv02d_add(struct acpi_device *device) { - u8 val; int ret; if (!device) @@ -224,10 +291,22 @@ static int lis3lv02d_add(struct acpi_device *device) strcpy(acpi_device_class(device), ACPI_MDPS_CLASS); device->driver_data = &adev; - lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val); - if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) { + lis3lv02d_acpi_read(device->handle, WHO_AM_I, &adev.whoami); + switch (adev.whoami) { + case LIS_DOUBLE_ID: + printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n"); + adev.read_data = lis3lv02d_read_16; + adev.mdps_max_val = 2048; + break; + case LIS_SINGLE_ID: + printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n"); + adev.read_data = lis3lv02d_read_8; + adev.mdps_max_val = 128; + break; + default: printk(KERN_ERR DRIVER_NAME - ": Accelerometer chip not LIS3LV02D{L,Q}\n"); + ": unknown sensor type 0x%X\n", adev.whoami); + return -EINVAL; } /* If possible use a "standard" axes order */ @@ -242,6 +321,9 @@ static int lis3lv02d_add(struct acpi_device *device) if (ret) return ret; + /* obtain IRQ number of our device from ACPI */ + lis3lv02d_enum_resources(adev.device); + ret = lis3lv02d_init_device(&adev); if (ret) { flush_work(&hpled_led.work); diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 219d2d0..8bb2158 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -3,7 +3,7 @@ * * Copyright (C) 2007-2008 Yan Burman * Copyright (C) 2008 Eric Piel - * Copyright (C) 2008 Pavel Machek + * Copyright (C) 2008-2009 Pavel Machek * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -35,6 +35,7 @@ #include <linux/poll.h> #include <linux/freezer.h> #include <linux/uaccess.h> +#include <linux/miscdevice.h> #include <acpi/acpi_drivers.h> #include <asm/atomic.h> #include "lis3lv02d.h" @@ -52,24 +53,14 @@ * joystick. */ -/* Maximum value our axis may get for the input device (signed 12 bits) */ -#define MDPS_MAX_VAL 2048 +struct acpi_lis3lv02d adev = { + .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait), +}; -struct acpi_lis3lv02d adev; EXPORT_SYMBOL_GPL(adev); static int lis3lv02d_add_fs(struct acpi_device *device); -static s16 lis3lv02d_read_16(acpi_handle handle, int reg) -{ - u8 lo, hi; - - adev.read(handle, reg, &lo); - adev.read(handle, reg + 1, &hi); - /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ - return (s16)((hi << 8) | lo); -} - /** * lis3lv02d_get_axis - For the given axis, give the value converted * @axis: 1,2,3 - can also be negative @@ -98,9 +89,9 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) { int position[3]; - position[0] = lis3lv02d_read_16(handle, OUTX_L); - position[1] = lis3lv02d_read_16(handle, OUTY_L); - position[2] = lis3lv02d_read_16(handle, OUTZ_L); + position[0] = adev.read_data(handle, OUTX); + position[1] = adev.read_data(handle, OUTY); + position[2] = adev.read_data(handle, OUTZ); *x = lis3lv02d_get_axis(adev.ac.x, position); *y = lis3lv02d_get_axis(adev.ac.y, position); @@ -110,26 +101,13 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) void lis3lv02d_poweroff(acpi_handle handle) { adev.is_on = 0; - /* disable X,Y,Z axis and power down */ - adev.write(handle, CTRL_REG1, 0x00); } EXPORT_SYMBOL_GPL(lis3lv02d_poweroff); void lis3lv02d_poweron(acpi_handle handle) { - u8 val; - adev.is_on = 1; adev.init(handle); - adev.write(handle, FF_WU_CFG, 0); - /* - * BDU: LSB and MSB values are not updated until both have been read. - * So the value read will always be correct. - * IEN: Interrupt for free-fall and DD, not for data-ready. - */ - adev.read(handle, CTRL_REG2, &val); - val |= CTRL2_BDU | CTRL2_IEN; - adev.write(handle, CTRL_REG2, val); } EXPORT_SYMBOL_GPL(lis3lv02d_poweron); @@ -162,6 +140,140 @@ static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev) mutex_unlock(&dev->lock); } +static irqreturn_t lis302dl_interrupt(int irq, void *dummy) +{ + /* + * Be careful: on some HP laptops the bios force DD when on battery and + * the lid is closed. This leads to interrupts as soon as a little move + * is done. + */ + atomic_inc(&adev.count); + + wake_up_interruptible(&adev.misc_wait); + kill_fasync(&adev.async_queue, SIGIO, POLL_IN); + return IRQ_HANDLED; +} + +static int lis3lv02d_misc_open(struct inode *inode, struct file *file) +{ + int ret; + + if (test_and_set_bit(0, &adev.misc_opened)) + return -EBUSY; /* already open */ + + atomic_set(&adev.count, 0); + + /* + * The sensor can generate interrupts for free-fall and direction + * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep + * the things simple and _fast_ we activate it only for free-fall, so + * no need to read register (very slow with ACPI). For the same reason, + * we forbid shared interrupts. + * + * IRQF_TRIGGER_RISING seems pointless on HP laptops because the + * io-apic is not configurable (and generates a warning) but I keep it + * in case of support for other hardware. + */ + ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING, + DRIVER_NAME, &adev); + + if (ret) { + clear_bit(0, &adev.misc_opened); + printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq); + return -EBUSY; + } + lis3lv02d_increase_use(&adev); + printk("lis3: registered interrupt %d\n", adev.irq); + return 0; +} + +static int lis3lv02d_misc_release(struct inode *inode, struct file *file) +{ + fasync_helper(-1, file, 0, &adev.async_queue); + lis3lv02d_decrease_use(&adev); + free_irq(adev.irq, &adev); + clear_bit(0, &adev.misc_opened); /* release the device */ + return 0; +} + +static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf, + size_t count, loff_t *pos) +{ + DECLARE_WAITQUEUE(wait, current); + u32 data; + unsigned char byte_data; + ssize_t retval = 1; + + if (count < 1) + return -EINVAL; + + add_wait_queue(&adev.misc_wait, &wait); + while (true) { + set_current_state(TASK_INTERRUPTIBLE); + data = atomic_xchg(&adev.count, 0); + if (data) + break; + + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + goto out; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + goto out; + } + + schedule(); + } + + if (data < 255) + byte_data = data; + else + byte_data = 255; + + /* make sure we are not going into copy_to_user() with + * TASK_INTERRUPTIBLE state */ + set_current_state(TASK_RUNNING); + if (copy_to_user(buf, &byte_data, sizeof(byte_data))) + retval = -EFAULT; + +out: + __set_current_state(TASK_RUNNING); + remove_wait_queue(&adev.misc_wait, &wait); + + return retval; +} + +static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait) +{ + poll_wait(file, &adev.misc_wait, wait); + if (atomic_read(&adev.count)) + return POLLIN | POLLRDNORM; + return 0; +} + +static int lis3lv02d_misc_fasync(int fd, struct file *file, int on) +{ + return fasync_helper(fd, file, on, &adev.async_queue); +} + +static const struct file_operations lis3lv02d_misc_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = lis3lv02d_misc_read, + .open = lis3lv02d_misc_open, + .release = lis3lv02d_misc_release, + .poll = lis3lv02d_misc_poll, + .fasync = lis3lv02d_misc_fasync, +}; + +static struct miscdevice lis3lv02d_misc_device = { + .minor = MISC_DYNAMIC_MINOR, + .name = "freefall", + .fops = &lis3lv02d_misc_fops, +}; + /** * lis3lv02d_joystick_kthread - Kthread polling function * @data: unused - here to conform to threadfn prototype @@ -203,7 +315,6 @@ static void lis3lv02d_joystick_close(struct input_dev *input) lis3lv02d_decrease_use(&adev); } - static inline void lis3lv02d_calibrate_joystick(void) { lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib); @@ -231,9 +342,9 @@ int lis3lv02d_joystick_enable(void) adev.idev->close = lis3lv02d_joystick_close; set_bit(EV_ABS, adev.idev->evbit); - input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); - input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); - input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_X, -adev.mdps_max_val, adev.mdps_max_val, 3, 3); + input_set_abs_params(adev.idev, ABS_Y, -adev.mdps_max_val, adev.mdps_max_val, 3, 3); + input_set_abs_params(adev.idev, ABS_Z, -adev.mdps_max_val, adev.mdps_max_val, 3, 3); err = input_register_device(adev.idev); if (err) { @@ -250,6 +361,7 @@ void lis3lv02d_joystick_disable(void) if (!adev.idev) return; + misc_deregister(&lis3lv02d_misc_device); input_unregister_device(adev.idev); adev.idev = NULL; } @@ -268,6 +380,19 @@ int lis3lv02d_init_device(struct acpi_lis3lv02d *dev) if (lis3lv02d_joystick_enable()) printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); + printk("lis3_init_device: irq %d\n", dev->irq); + + /* if we did not get an IRQ from ACPI - we have nothing more to do */ + if (!dev->irq) { + printk(KERN_ERR DRIVER_NAME + ": No IRQ in ACPI. Disabling /dev/freefall\n"); + goto out; + } + + printk("lis3: registering device\n"); + if (misc_register(&lis3lv02d_misc_device)) + printk(KERN_ERR DRIVER_NAME ": misc_register failed\n"); +out: lis3lv02d_decrease_use(dev); return 0; } @@ -351,6 +476,6 @@ int lis3lv02d_remove_fs(void) EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs); MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); -MODULE_AUTHOR("Yan Burman and Eric Piel"); +MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h index 223f1c0..75972bf 100644 --- a/drivers/hwmon/lis3lv02d.h +++ b/drivers/hwmon/lis3lv02d.h @@ -22,12 +22,15 @@ /* * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to * be connected via SPI. There exists also several similar chips (such as LIS302DL or - * LIS3L02DQ) but not in the HP laptops and they have slightly different registers. + * LIS3L02DQ) and they have slightly different registers, but we can provide a + * common interface for all of them. * They can also be connected via I²C. */ -#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */ -#define LIS302DL_ID 0x3B /* Also the LIS202DL! */ +/* 2-byte registers */ +#define LIS_DOUBLE_ID 0x3A /* LIS3LV02D[LQ] */ +/* 1-byte registers */ +#define LIS_SINGLE_ID 0x3B /* LIS[32]02DL and others */ enum lis3lv02d_reg { WHO_AM_I = 0x0F, @@ -44,10 +47,13 @@ enum lis3lv02d_reg { STATUS_REG = 0x27, OUTX_L = 0x28, OUTX_H = 0x29, + OUTX = 0x29, OUTY_L = 0x2A, OUTY_H = 0x2B, + OUTY = 0x2B, OUTZ_L = 0x2C, OUTZ_H = 0x2D, + OUTZ = 0x2D, FF_WU_CFG = 0x30, FF_WU_SRC = 0x31, FF_WU_ACK = 0x32, @@ -159,6 +165,10 @@ struct acpi_lis3lv02d { acpi_status (*write) (acpi_handle handle, int reg, u8 val); acpi_status (*read) (acpi_handle handle, int reg, u8 *ret); + u8 whoami; /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */ + s16 (*read_data) (acpi_handle handle, int reg); + int mdps_max_val; + struct input_dev *idev; /* input device */ struct task_struct *kthread; /* kthread for input */ struct mutex lock; @@ -170,6 +180,11 @@ struct acpi_lis3lv02d { unsigned char is_on; /* whether the device is on or off */ unsigned char usage; /* usage counter */ struct axis_conversion ac; /* hw -> logical axis */ + + u32 irq; /* IRQ number */ + struct fasync_struct *async_queue; /* queue for the misc device */ + wait_queue_head_t misc_wait; /* Wait queue for the misc device */ + unsigned long misc_opened; /* bit0: whether the device is open */ }; int lis3lv02d_init_device(struct acpi_lis3lv02d *dev); diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c index b0ce378..73f77a9 100644 --- a/drivers/hwmon/vt1211.c +++ b/drivers/hwmon/vt1211.c @@ -1262,7 +1262,7 @@ static int __init vt1211_device_add(unsigned short address) res.name = pdev->name; err = acpi_check_resource_conflict(&res); if (err) - goto EXIT; + goto EXIT_DEV_PUT; err = platform_device_add_resources(pdev, &res, 1); if (err) { diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index cb808d0..feae743 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -1548,7 +1548,7 @@ static int __init sensors_w83627ehf_init(void) err = acpi_check_resource_conflict(&res); if (err) - goto exit; + goto exit_device_put; err = platform_device_add_resources(pdev, &res, 1); if (err) { diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c index 5b2e3af4..08c4fa3 100644 --- a/drivers/ide/qd65xx.c +++ b/drivers/ide/qd65xx.c @@ -16,7 +16,7 @@ /* * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by - * Samuel Thibault <samuel.thibault@fnac.net> + * Samuel Thibault <samuel.thibault@ens-lyon.org> */ #include <linux/module.h> diff --git a/drivers/ide/qd65xx.h b/drivers/ide/qd65xx.h index 6636f96..d7e67a1 100644 --- a/drivers/ide/qd65xx.h +++ b/drivers/ide/qd65xx.h @@ -4,7 +4,7 @@ /* * Authors: Petr Soucek <petr@ryston.cz> - * Samuel Thibault <samuel.thibault@fnac.net> + * Samuel Thibault <samuel.thibault@ens-lyon.org> */ /* truncates a in [b,c] */ diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index a329e6b..3838bc4 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -1823,6 +1823,10 @@ static int dv1394_open(struct inode *inode, struct file *file) #endif + printk(KERN_INFO "%s: NOTE, the dv1394 interface is unsupported " + "and will not be available in the new firewire driver stack. " + "Try libraw1394 based programs instead.\n", current->comm); + return 0; } @@ -2567,10 +2571,6 @@ static int __init dv1394_init_module(void) { int ret; - printk(KERN_WARNING - "NOTE: The dv1394 driver is unsupported and may be removed in a " - "future Linux release. Use raw1394 instead.\n"); - cdev_init(&dv1394_cdev, &dv1394_fops); dv1394_cdev.owner = THIS_MODULE; ret = cdev_add(&dv1394_cdev, IEEE1394_DV1394_DEV, 16); diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index a343385..f14813b 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -328,7 +328,7 @@ static void dispatch_io(int rw, unsigned int num_regions, struct dpages old_pages = *dp; if (sync) - rw |= (1 << BIO_RW_SYNC); + rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); /* * For multiple regions we need to be careful to rewind diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 3073618..0a225da 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -344,7 +344,7 @@ static int run_io_job(struct kcopyd_job *job) { int r; struct dm_io_request io_req = { - .bi_rw = job->rw | (1 << BIO_RW_SYNC), + .bi_rw = job->rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG), .mem.type = DM_IO_PAGE_LIST, .mem.ptr.pl = job->pages, .mem.offset = job->offset, diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 1e3aea9..09658b2 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -25,13 +25,13 @@ static inline dev_info_t *which_dev(mddev_t *mddev, sector_t sector) { dev_info_t *hash; linear_conf_t *conf = mddev_to_conf(mddev); + sector_t idx = sector >> conf->sector_shift; /* * sector_div(a,b) returns the remainer and sets a to a/b */ - sector >>= conf->sector_shift; - (void)sector_div(sector, conf->spacing); - hash = conf->hash_table[sector]; + (void)sector_div(idx, conf->spacing); + hash = conf->hash_table[idx]; while (sector >= hash->num_sectors + hash->start_sector) hash++; diff --git a/drivers/md/md.c b/drivers/md/md.c index 41e2509..03b4cd0 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -474,7 +474,7 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, * causes ENOTSUPP, we allocate a spare bio... */ struct bio *bio = bio_alloc(GFP_NOIO, 1); - int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNC); + int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG); bio->bi_bdev = rdev->bdev; bio->bi_sector = sector; @@ -531,7 +531,7 @@ int sync_page_io(struct block_device *bdev, sector_t sector, int size, struct completion event; int ret; - rw |= (1 << BIO_RW_SYNC); + rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); bio->bi_bdev = bdev; bio->bi_sector = sector; @@ -1481,6 +1481,11 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) if (find_rdev_nr(mddev, rdev->desc_nr)) return -EBUSY; } + if (mddev->max_disks && rdev->desc_nr >= mddev->max_disks) { + printk(KERN_WARNING "md: %s: array is limited to %d devices\n", + mdname(mddev), mddev->max_disks); + return -EBUSY; + } bdevname(rdev->bdev,b); while ( (s=strchr(b, '/')) != NULL) *s = '!'; @@ -2441,6 +2446,15 @@ static void analyze_sbs(mddev_t * mddev) i = 0; rdev_for_each(rdev, tmp, mddev) { + if (rdev->desc_nr >= mddev->max_disks || + i > mddev->max_disks) { + printk(KERN_WARNING + "md: %s: %s: only %d devices permitted\n", + mdname(mddev), bdevname(rdev->bdev, b), + mddev->max_disks); + kick_rdev_from_array(rdev); + continue; + } if (rdev != freshest) if (super_types[mddev->major_version]. validate_super(mddev, rdev)) { @@ -4614,13 +4628,6 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev) * noticed in interrupt contexts ... */ - if (rdev->desc_nr == mddev->max_disks) { - printk(KERN_WARNING "%s: can not hot-add to full array!\n", - mdname(mddev)); - err = -EBUSY; - goto abort_unbind_export; - } - rdev->raid_disk = -1; md_update_sb(mddev, 1); @@ -4634,9 +4641,6 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev) md_new_event(mddev); return 0; -abort_unbind_export: - unbind_rdev_from_array(rdev); - abort_export: export_rdev(rdev); return err; diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 7b4f5f7..01e3cff 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1640,7 +1640,8 @@ static void raid1d(mddev_t *mddev) } bio = r1_bio->bios[r1_bio->read_disk]; - if ((disk=read_balance(conf, r1_bio)) == -1) { + if ((disk=read_balance(conf, r1_bio)) == -1 || + disk == r1_bio->read_disk) { printk(KERN_ALERT "raid1: %s: unrecoverable I/O" " read error for block %llu\n", bdevname(bio->bi_bdev,b), diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index de7adaf..78412c9 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -318,7 +318,6 @@ static int simple_std_setup(struct dvb_frontend *fe, u8 *config, u8 *cb) { struct tuner_simple_priv *priv = fe->tuner_priv; - u8 tuneraddr; int rc; /* tv norm specific stuff for multi-norm tuners */ @@ -387,6 +386,7 @@ static int simple_std_setup(struct dvb_frontend *fe, case TUNER_PHILIPS_TUV1236D: { + struct tuner_i2c_props i2c = priv->i2c_props; /* 0x40 -> ATSC antenna input 1 */ /* 0x48 -> ATSC antenna input 2 */ /* 0x00 -> NTSC antenna input 1 */ @@ -398,17 +398,15 @@ static int simple_std_setup(struct dvb_frontend *fe, buffer[1] = 0x04; } /* set to the correct mode (analog or digital) */ - tuneraddr = priv->i2c_props.addr; - priv->i2c_props.addr = 0x0a; - rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2); + i2c.addr = 0x0a; + rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2); if (2 != rc) tuner_warn("i2c i/o error: rc == %d " "(should be 2)\n", rc); - rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2); + rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2); if (2 != rc) tuner_warn("i2c i/o error: rc == %d " "(should be 2)\n", rc); - priv->i2c_props.addr = tuneraddr; break; } } diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index 0c733c6..069d847 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -364,16 +364,15 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, enum dmx_success success) { struct dmxdev_filter *dmxdevfilter = filter->priv; - unsigned long flags; int ret; if (dmxdevfilter->buffer.error) { wake_up(&dmxdevfilter->buffer.queue); return 0; } - spin_lock_irqsave(&dmxdevfilter->dev->lock, flags); + spin_lock(&dmxdevfilter->dev->lock); if (dmxdevfilter->state != DMXDEV_STATE_GO) { - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); return 0; } del_timer(&dmxdevfilter->timer); @@ -392,7 +391,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, } if (dmxdevfilter->params.sec.flags & DMX_ONESHOT) dmxdevfilter->state = DMXDEV_STATE_DONE; - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); wake_up(&dmxdevfilter->buffer.queue); return 0; } @@ -404,12 +403,11 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, { struct dmxdev_filter *dmxdevfilter = feed->priv; struct dvb_ringbuffer *buffer; - unsigned long flags; int ret; - spin_lock_irqsave(&dmxdevfilter->dev->lock, flags); + spin_lock(&dmxdevfilter->dev->lock); if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) { - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); return 0; } @@ -419,7 +417,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, else buffer = &dmxdevfilter->dev->dvr_buffer; if (buffer->error) { - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); wake_up(&buffer->queue); return 0; } @@ -430,7 +428,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, dvb_ringbuffer_flush(buffer); buffer->error = ret; } - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); wake_up(&buffer->queue); return 0; } diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c index a2c1fd5..e2eca0b 100644 --- a/drivers/media/dvb/dvb-core/dvb_demux.c +++ b/drivers/media/dvb/dvb-core/dvb_demux.c @@ -399,9 +399,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, size_t count) { - unsigned long flags; - - spin_lock_irqsave(&demux->lock, flags); + spin_lock(&demux->lock); while (count--) { if (buf[0] == 0x47) @@ -409,17 +407,16 @@ void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, buf += 188; } - spin_unlock_irqrestore(&demux->lock, flags); + spin_unlock(&demux->lock); } EXPORT_SYMBOL(dvb_dmx_swfilter_packets); void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count) { - unsigned long flags; int p = 0, i, j; - spin_lock_irqsave(&demux->lock, flags); + spin_lock(&demux->lock); if (demux->tsbufp) { i = demux->tsbufp; @@ -452,18 +449,17 @@ void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count) } bailout: - spin_unlock_irqrestore(&demux->lock, flags); + spin_unlock(&demux->lock); } EXPORT_SYMBOL(dvb_dmx_swfilter); void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count) { - unsigned long flags; int p = 0, i, j; u8 tmppack[188]; - spin_lock_irqsave(&demux->lock, flags); + spin_lock(&demux->lock); if (demux->tsbufp) { i = demux->tsbufp; @@ -504,7 +500,7 @@ void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count) } bailout: - spin_unlock_irqrestore(&demux->lock, flags); + spin_unlock(&demux->lock); } EXPORT_SYMBOL(dvb_dmx_swfilter_204); diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 67cbce8..4dfed6a 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -98,11 +98,16 @@ * - blacklisted KWorld radio in hid-core.c and hid-ids.h * 2008-12-03 Mark Lord <mlord@pobox.com> * - add support for DealExtreme USB Radio + * 2009-01-31 Bob Ross <pigiron@gmx.com> + * - correction of stereo detection/setting + * - correction of signal strength indicator scaling + * 2009-01-31 Rick Bronson <rick@efn.org> + * Tobias Lorenz <tobias.lorenz@gmx.net> + * - add LED status output * * ToDo: * - add firmware download/update support * - RDS support: interrupt mode, instead of polling - * - add LED status output (check if that's not already done in firmware) */ @@ -882,6 +887,30 @@ static int si470x_rds_on(struct si470x_device *radio) /************************************************************************** + * General Driver Functions - LED_REPORT + **************************************************************************/ + +/* + * si470x_set_led_state - sets the led state + */ +static int si470x_set_led_state(struct si470x_device *radio, + unsigned char led_state) +{ + unsigned char buf[LED_REPORT_SIZE]; + int retval; + + buf[0] = LED_REPORT; + buf[1] = LED_COMMAND; + buf[2] = led_state; + + retval = si470x_set_report(radio, (void *) &buf, sizeof(buf)); + + return (retval < 0) ? -EINVAL : 0; +} + + + +/************************************************************************** * RDS Driver Functions **************************************************************************/ @@ -1385,20 +1414,22 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, }; /* stereo indicator == stereo (instead of mono) */ - if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1) - tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - else + if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 0) tuner->rxsubchans = V4L2_TUNER_SUB_MONO; + else + tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; /* mono/stereo selector */ - if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 1) - tuner->audmode = V4L2_TUNER_MODE_MONO; - else + if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0) tuner->audmode = V4L2_TUNER_MODE_STEREO; + else + tuner->audmode = V4L2_TUNER_MODE_MONO; /* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */ - tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI) - * 0x0101; + /* measured in units of dbµV in 1 db increments (max at ~75 dbµV) */ + tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI); + /* the ideal factor is 0xffff/75 = 873,8 */ + tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10); /* automatic frequency control: -1: freq to low, 1 freq to high */ /* AFCRL does only indicate that freq. differs, not if too low/high */ @@ -1632,6 +1663,9 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, /* set initial frequency */ si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */ + /* set led to connect state */ + si470x_set_led_state(radio, BLINK_GREEN_LED); + /* rds buffer allocation */ radio->buf_size = rds_buf * 3; radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL); @@ -1715,6 +1749,9 @@ static void si470x_usb_driver_disconnect(struct usb_interface *intf) cancel_delayed_work_sync(&radio->work); usb_set_intfdata(intf, NULL); if (radio->users == 0) { + /* set led to disconnect state */ + si470x_set_led_state(radio, BLINK_ORANGE_LED); + video_unregister_device(radio->videodev); kfree(radio->buffer); kfree(radio); diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 2ed2452..65e4901 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -422,6 +422,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) if (urb == NULL) break; + BUG_ON(!gspca_dev->dev); gspca_dev->urb[i] = NULL; if (!gspca_dev->present) usb_kill_urb(urb); @@ -1950,8 +1951,12 @@ void gspca_disconnect(struct usb_interface *intf) { struct gspca_dev *gspca_dev = usb_get_intfdata(intf); + mutex_lock(&gspca_dev->usb_lock); gspca_dev->present = 0; + mutex_unlock(&gspca_dev->usb_lock); + destroy_urbs(gspca_dev); + gspca_dev->dev = NULL; usb_set_intfdata(intf, NULL); /* release the device */ diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index f6b3ef6..c13bd2a 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -393,7 +393,7 @@ static int ivtv_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo return 0; } - v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt); + v4l2_subdev_call(itv->sd_video, video, g_fmt, fmt); vbifmt->service_set = ivtv_get_service_set(vbifmt); return 0; } @@ -1748,6 +1748,18 @@ static long ivtv_default(struct file *file, void *fh, int cmd, void *arg) break; } + case IVTV_IOC_DMA_FRAME: + case VIDEO_GET_PTS: + case VIDEO_GET_FRAME_COUNT: + case VIDEO_GET_EVENT: + case VIDEO_PLAY: + case VIDEO_STOP: + case VIDEO_FREEZE: + case VIDEO_CONTINUE: + case VIDEO_COMMAND: + case VIDEO_TRY_COMMAND: + return ivtv_decoder_ioctls(file, cmd, (void *)arg); + default: return -EINVAL; } @@ -1790,18 +1802,6 @@ static long ivtv_serialized_ioctl(struct ivtv *itv, struct file *filp, ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); return 0; - case IVTV_IOC_DMA_FRAME: - case VIDEO_GET_PTS: - case VIDEO_GET_FRAME_COUNT: - case VIDEO_GET_EVENT: - case VIDEO_PLAY: - case VIDEO_STOP: - case VIDEO_FREEZE: - case VIDEO_CONTINUE: - case VIDEO_COMMAND: - case VIDEO_TRY_COMMAND: - return ivtv_decoder_ioctls(filp, cmd, (void *)arg); - default: break; } diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c index 1a4d046..aa266e1 100644 --- a/drivers/mfd/htc-egpio.c +++ b/drivers/mfd/htc-egpio.c @@ -286,7 +286,7 @@ static int __init egpio_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) goto fail; - ei->base_addr = ioremap_nocache(res->start, res->end - res->start); + ei->base_addr = ioremap_nocache(res->start, resource_size(res)); if (!ei->base_addr) goto fail; pr_debug("EGPIO phys=%08x virt=%p\n", (u32)res->start, ei->base_addr); @@ -307,7 +307,7 @@ static int __init egpio_probe(struct platform_device *pdev) ei->nchips = pdata->num_chips; ei->chip = kzalloc(sizeof(struct egpio_chip) * ei->nchips, GFP_KERNEL); - if (!ei) { + if (!ei->chip) { ret = -ENOMEM; goto fail; } diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 24508e2..2e3605765 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -626,7 +626,6 @@ static int __devinit pcf50633_probe(struct i2c_client *client, } if (client->irq) { - set_irq_handler(client->irq, handle_level_irq); ret = request_irq(client->irq, pcf50633_irq, IRQF_TRIGGER_LOW, "pcf50633", pcf); @@ -679,6 +678,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client) static struct i2c_device_id pcf50633_id_table[] = { {"pcf50633", 0x73}, + {/* end of list */} }; static struct i2c_driver pcf50633_driver = { diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 0e5761f..4c7b796 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1050,7 +1050,7 @@ static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm, return gpiochip_add(gchip); } -static int sm501_register_gpio(struct sm501_devdata *sm) +static int __devinit sm501_register_gpio(struct sm501_devdata *sm) { struct sm501_gpio *gpio = &sm->gpio; resource_size_t iobase = sm->io_res->start + SM501_GPIO; @@ -1321,7 +1321,7 @@ static unsigned int sm501_mem_local[] = { * Common init code for an SM501 */ -static int sm501_init_dev(struct sm501_devdata *sm) +static int __devinit sm501_init_dev(struct sm501_devdata *sm) { struct sm501_initdata *idata; struct sm501_platdata *pdata; @@ -1397,7 +1397,7 @@ static int sm501_init_dev(struct sm501_devdata *sm) return 0; } -static int sm501_plat_probe(struct platform_device *dev) +static int __devinit sm501_plat_probe(struct platform_device *dev) { struct sm501_devdata *sm; int ret; @@ -1586,8 +1586,8 @@ static struct sm501_platdata sm501_pci_platdata = { .gpio_base = -1, }; -static int sm501_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) +static int __devinit sm501_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) { struct sm501_devdata *sm; int err; @@ -1693,7 +1693,7 @@ static void sm501_dev_remove(struct sm501_devdata *sm) sm501_gpio_remove(sm); } -static void sm501_pci_remove(struct pci_dev *dev) +static void __devexit sm501_pci_remove(struct pci_dev *dev) { struct sm501_devdata *sm = pci_get_drvdata(dev); @@ -1727,16 +1727,16 @@ static struct pci_device_id sm501_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, sm501_pci_tbl); -static struct pci_driver sm501_pci_drv = { +static struct pci_driver sm501_pci_driver = { .name = "sm501", .id_table = sm501_pci_tbl, .probe = sm501_pci_probe, - .remove = sm501_pci_remove, + .remove = __devexit_p(sm501_pci_remove), }; MODULE_ALIAS("platform:sm501"); -static struct platform_driver sm501_plat_drv = { +static struct platform_driver sm501_plat_driver = { .driver = { .name = "sm501", .owner = THIS_MODULE, @@ -1749,14 +1749,14 @@ static struct platform_driver sm501_plat_drv = { static int __init sm501_base_init(void) { - platform_driver_register(&sm501_plat_drv); - return pci_register_driver(&sm501_pci_drv); + platform_driver_register(&sm501_plat_driver); + return pci_register_driver(&sm501_pci_driver); } static void __exit sm501_base_exit(void) { - platform_driver_unregister(&sm501_plat_drv); - pci_unregister_driver(&sm501_pci_drv); + platform_driver_unregister(&sm501_plat_driver); + pci_unregister_driver(&sm501_pci_driver); } module_init(sm501_base_init); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index e7ab003..68826f1 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -38,7 +38,7 @@ #include <linux/i2c.h> #include <linux/i2c/twl4030.h> -#ifdef CONFIG_ARM +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) #include <mach/cpu.h> #endif diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index f92595c..84d5ea1 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1111,7 +1111,7 @@ int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref) do { schedule_timeout_interruptible(1); reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1); - } while (tries-- && (reg & WM8350_AUXADC_POLL)); + } while (--tries && (reg & WM8350_AUXADC_POLL)); if (!tries) dev_err(wm8350->dev, "adc chn %d read timeout\n", channel); @@ -1297,14 +1297,29 @@ static void wm8350_client_dev_register(struct wm8350 *wm8350, int wm8350_device_init(struct wm8350 *wm8350, int irq, struct wm8350_platform_data *pdata) { - int ret = -EINVAL; + int ret; u16 id1, id2, mask_rev; u16 cust_id, mode, chip_rev; /* get WM8350 revision and config mode */ - wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1); - wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2); - wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev); + ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read ID: %d\n", ret); + goto err; + } + + ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read ID: %d\n", ret); + goto err; + } + + ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), + &mask_rev); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read revision: %d\n", ret); + goto err; + } id1 = be16_to_cpu(id1); id2 = be16_to_cpu(id2); @@ -1404,14 +1419,12 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, return ret; } - if (pdata && pdata->init) { - ret = pdata->init(wm8350); - if (ret != 0) { - dev_err(wm8350->dev, "Platform init() failed: %d\n", - ret); - goto err; - } - } + wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF); mutex_init(&wm8350->auxadc_mutex); mutex_init(&wm8350->irq_mutex); @@ -1430,6 +1443,15 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, } wm8350->chip_irq = irq; + if (pdata && pdata->init) { + ret = pdata->init(wm8350); + if (ret != 0) { + dev_err(wm8350->dev, "Platform init() failed: %d\n", + ret); + goto err; + } + } + wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0); wm8350_client_dev_register(wm8350, "wm8350-codec", diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c index 68887b8..9a4cc95 100644 --- a/drivers/mfd/wm8350-regmap.c +++ b/drivers/mfd/wm8350-regmap.c @@ -3188,7 +3188,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = { { 0x7CFF, 0x0C00, 0x7FFF }, /* R1 - ID */ { 0x0000, 0x0000, 0x0000 }, /* R2 */ { 0xBE3B, 0xBE3B, 0x8000 }, /* R3 - System Control 1 */ - { 0xFCF7, 0xFCF7, 0xF800 }, /* R4 - System Control 2 */ + { 0xFEF7, 0xFEF7, 0xF800 }, /* R4 - System Control 2 */ { 0x80FF, 0x80FF, 0x8000 }, /* R5 - System Hibernate */ { 0xFB0E, 0xFB0E, 0x0000 }, /* R6 - Interface Control */ { 0x0000, 0x0000, 0x0000 }, /* R7 */ diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 5607319..c64e679 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -217,6 +217,7 @@ config DELL_LAPTOP depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL + depends on POWER_SUPPLY default n ---help--- This driver adds support for rfkill and backlight control to Dell diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index bf5e4d0..558bf3f 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -35,7 +35,7 @@ struct ssc_device *ssc_request(unsigned int ssc_num) if (!ssc_valid) { spin_unlock(&user_lock); - dev_dbg(&ssc->pdev->dev, "could not find requested device\n"); + pr_err("ssc: ssc%d platform device is missing\n", ssc_num); return ERR_PTR(-ENODEV); } diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 10c421b..f26667a 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -207,7 +207,7 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data) &device_ccb->recv_ctrl); /* give iLO some time to process stop request */ - for (retries = 1000; retries > 0; retries--) { + for (retries = MAX_WAIT; retries > 0; retries--) { doorbell_set(driver_ccb); udelay(1); if (!(ioread32(&device_ccb->send_ctrl) & (1 << CTRL_BITPOS_A)) @@ -309,7 +309,7 @@ static int ilo_ccb_open(struct ilo_hwinfo *hw, struct ccb_data *data, int slot) doorbell_clr(driver_ccb); /* make sure iLO is really handling requests */ - for (i = 1000; i > 0; i--) { + for (i = MAX_WAIT; i > 0; i--) { if (ilo_pkt_dequeue(hw, driver_ccb, SENDQ, &pkt_id, NULL, NULL)) break; udelay(1); @@ -326,7 +326,7 @@ static int ilo_ccb_open(struct ilo_hwinfo *hw, struct ccb_data *data, int slot) return 0; free: - pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa); + ilo_ccb_close(pdev, data); out: return error; } diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h index a281207..b64a20e 100644 --- a/drivers/misc/hpilo.h +++ b/drivers/misc/hpilo.h @@ -19,6 +19,8 @@ #define MAX_ILO_DEV 1 /* max number of files */ #define MAX_OPEN (MAX_CCB * MAX_ILO_DEV) +/* spin counter for open/close delay */ +#define MAX_WAIT 10000 /* * Per device, used to track global memory allocations. diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index a5bd658..275b788 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved. */ /* @@ -514,7 +514,8 @@ struct xpc_channel_uv { /* partition's notify mq */ struct xpc_send_msg_slot_uv *send_msg_slots; - struct xpc_notify_mq_msg_uv *recv_msg_slots; + void *recv_msg_slots; /* each slot will hold a xpc_notify_mq_msg_uv */ + /* structure plus the user's payload */ struct xpc_fifo_head_uv msg_slot_free_list; struct xpc_fifo_head_uv recv_msg_list; /* deliverable payloads */ diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index f17f7d4..29c0502 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2008-2009 Silicon Graphics, Inc. All Rights Reserved. */ /* @@ -1010,8 +1010,8 @@ xpc_allocate_recv_msg_slot_uv(struct xpc_channel *ch) continue; for (entry = 0; entry < nentries; entry++) { - msg_slot = ch_uv->recv_msg_slots + entry * - ch->entry_size; + msg_slot = ch_uv->recv_msg_slots + + entry * ch->entry_size; msg_slot->hdr.msg_slot_number = entry; } @@ -1308,9 +1308,8 @@ xpc_handle_notify_mq_msg_uv(struct xpc_partition *part, /* we're dealing with a normal message sent via the notify_mq */ ch_uv = &ch->sn.uv; - msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots + - (msg->hdr.msg_slot_number % ch->remote_nentries) * - ch->entry_size); + msg_slot = ch_uv->recv_msg_slots + + (msg->hdr.msg_slot_number % ch->remote_nentries) * ch->entry_size; BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number); BUG_ON(msg_slot->hdr.size != 0); diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 45b1f43..513eb09 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -584,7 +584,7 @@ static int mmc_blk_probe(struct mmc_card *card) if (err) goto out; - string_get_size(get_capacity(md->disk) << 9, STRING_UNITS_2, + string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2, cap_str, sizeof(cap_str)); printk(KERN_INFO "%s: %s %s %s %s\n", md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index b92b172..b9f1e84 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -494,7 +494,7 @@ static int mmc_test_basic_read(struct mmc_test_card *test) sg_init_one(&sg, test->buffer, 512); - ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1); + ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 0); if (ret) return ret; diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 76bfe16..2b1196e 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1548,9 +1548,10 @@ static bool filter(struct dma_chan *chan, void *slave) { struct dw_dma_slave *dws = slave; - if (dws->dma_dev == chan->device->dev) + if (dws->dma_dev == chan->device->dev) { + chan->private = dws; return true; - else + } else return false; } #endif diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index db37490..a631c81 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -55,6 +55,7 @@ #define VS30 (1 << 25) #define SDVS18 (0x5 << 9) #define SDVS30 (0x6 << 9) +#define SDVS33 (0x7 << 9) #define SDVSCLR 0xFFFFF1FF #define SDVSDET 0x00000400 #define AUTOIDLE 0x1 @@ -375,6 +376,32 @@ static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status) } #endif /* CONFIG_MMC_DEBUG */ +/* + * MMC controller internal state machines reset + * + * Used to reset command or data internal state machines, using respectively + * SRC or SRD bit of SYSCTL register + * Can be called from interrupt context + */ +static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host, + unsigned long bit) +{ + unsigned long i = 0; + unsigned long limit = (loops_per_jiffy * + msecs_to_jiffies(MMC_TIMEOUT_MS)); + + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | bit); + + while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) && + (i++ < limit)) + cpu_relax(); + + if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit) + dev_err(mmc_dev(host->mmc), + "Timeout waiting on controller reset in %s\n", + __func__); +} /* * MMC controller IRQ handler @@ -403,21 +430,17 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) (status & CMD_CRC)) { if (host->cmd) { if (status & CMD_TIMEOUT) { - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, - SYSCTL) | SRC); - while (OMAP_HSMMC_READ(host->base, - SYSCTL) & SRC) - ; - + mmc_omap_reset_controller_fsm(host, SRC); host->cmd->error = -ETIMEDOUT; } else { host->cmd->error = -EILSEQ; } end_cmd = 1; } - if (host->data) + if (host->data) { mmc_dma_cleanup(host); + mmc_omap_reset_controller_fsm(host, SRD); + } } if ((status & DATA_TIMEOUT) || (status & DATA_CRC)) { @@ -426,12 +449,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) mmc_dma_cleanup(host); else host->data->error = -EILSEQ; - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, - SYSCTL) | SRD); - while (OMAP_HSMMC_READ(host->base, - SYSCTL) & SRD) - ; + mmc_omap_reset_controller_fsm(host, SRD); end_trans = 1; } } @@ -456,13 +474,20 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) } /* - * Switch MMC operating voltage + * Switch MMC interface voltage ... only relevant for MMC1. + * + * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver. + * The MMC2 transceiver controls are used instead of DAT4..DAT7. + * Some chips, like eMMC ones, use internal transceivers. */ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd) { u32 reg_val = 0; int ret; + if (host->id != OMAP_MMC1_DEVID) + return 0; + /* Disable the clocks */ clk_disable(host->fclk); clk_disable(host->iclk); @@ -485,19 +510,26 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd) OMAP_HSMMC_WRITE(host->base, HCTL, OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); reg_val = OMAP_HSMMC_READ(host->base, HCTL); + /* * If a MMC dual voltage card is detected, the set_ios fn calls * this fn with VDD bit set for 1.8V. Upon card removal from the * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF. * - * Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is - * set in HCTL. + * Cope with a bit of slop in the range ... per data sheets: + * - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max, + * but recommended values are 1.71V to 1.89V + * - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max, + * but recommended values are 2.7V to 3.3V + * + * Board setup code shouldn't permit anything very out-of-range. + * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the + * middle range) but VSIM can't power DAT4..DAT7 at more than 3V. */ - if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) || - ((1 << vdd) == MMC_VDD_33_34))) - reg_val |= SDVS30; - if ((1 << vdd) == MMC_VDD_165_195) + if ((1 << vdd) <= MMC_VDD_23_24) reg_val |= SDVS18; + else + reg_val |= SDVS30; OMAP_HSMMC_WRITE(host->base, HCTL, reg_val); @@ -517,16 +549,15 @@ static void mmc_omap_detect(struct work_struct *work) { struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, mmc_carddetect_work); + struct omap_mmc_slot_data *slot = &mmc_slot(host); + + host->carddetect = slot->card_detect(slot->card_detect_irq); sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch"); if (host->carddetect) { mmc_detect_change(host->mmc, (HZ * 200) / 1000); } else { - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, SYSCTL) | SRD); - while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD) - ; - + mmc_omap_reset_controller_fsm(host, SRD); mmc_detect_change(host->mmc, (HZ * 50) / 1000); } } @@ -538,7 +569,6 @@ static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id) { struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id; - host->carddetect = mmc_slot(host).card_detect(irq); schedule_work(&host->mmc_carddetect_work); return IRQ_HANDLED; @@ -757,10 +787,14 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); /* - * Reset bus voltage to 3V if it got set to 1.8V earlier. + * Reset interface voltage to 3V if it's 1.8V now; + * only relevant on MMC-1, the others always use 1.8V. + * * REVISIT: If we are able to detect cards after unplugging * a 1.8V card, this code should not be needed. */ + if (host->id != OMAP_MMC1_DEVID) + break; if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { int vdd = fls(host->mmc->ocr_avail) - 1; if (omap_mmc_switch_opcond(host, vdd) != 0) @@ -784,7 +818,9 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } if (host->id == OMAP_MMC1_DEVID) { - /* Only MMC1 can operate at 3V/1.8V */ + /* Only MMC1 can interface at 3V without some flavor + * of external transceiver; but they all handle 1.8V. + */ if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && (ios->vdd == DUAL_VOLT_OCR_BIT)) { /* @@ -1137,7 +1173,9 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state) " level suspend\n"); } - if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { + if (host->id == OMAP_MMC1_DEVID + && !(OMAP_HSMMC_READ(host->base, HCTL) + & SDVSDET)) { OMAP_HSMMC_WRITE(host->base, HCTL, OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 35a98ee..f4a67c6 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -329,7 +329,7 @@ static void do_pio_write(struct s3cmci_host *host) to_ptr = host->base + host->sdidata; - while ((fifo = fifo_free(host))) { + while ((fifo = fifo_free(host)) > 3) { if (!host->pio_bytes) { res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr); diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index f07255c..8cff5f5 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -144,8 +144,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | SDHCI_QUIRK_RESET_AFTER_REQUEST | - SDHCI_QUIRK_BROKEN_SMALL_PIO | - SDHCI_QUIRK_FORCE_HIGHSPEED; + SDHCI_QUIRK_BROKEN_SMALL_PIO; } /* diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 6b2d1f9..f52f305 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1636,8 +1636,7 @@ int sdhci_add_host(struct sdhci_host *host) mmc->f_max = host->max_clk; mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; - if ((caps & SDHCI_CAN_DO_HISPD) || - (host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED)) + if (caps & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED; mmc->ocr_avail = 0; @@ -1723,7 +1722,9 @@ int sdhci_add_host(struct sdhci_host *host) #endif #ifdef SDHCI_USE_LEDS_CLASS - host->led.name = mmc_hostname(mmc); + snprintf(host->led_name, sizeof(host->led_name), + "%s::", mmc_hostname(mmc)); + host->led.name = host->led_name; host->led.brightness = LED_OFF; host->led.default_trigger = mmc_hostname(mmc); host->led.brightness_set = sdhci_led_control; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 3efba23..ebb8365 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -208,8 +208,6 @@ struct sdhci_host { #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) /* Controller has an issue with buffer bits for small transfers */ #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) -/* Controller supports high speed but doesn't have the caps bit set */ -#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ @@ -222,6 +220,7 @@ struct sdhci_host { #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) struct led_classdev led; /* LED control */ + char led_name[32]; #endif spinlock_t lock; /* Mutex */ diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 7df6bbf..6f6a0f6 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -453,7 +453,7 @@ static struct platform_driver sa1100_mtd_driver = { .resume = sa1100_mtd_resume, .shutdown = sa1100_mtd_shutdown, .driver = { - .name = "flash", + .name = "sa1100-mtd", .owner = THIS_MODULE, }, }; @@ -474,4 +474,4 @@ module_exit(sa1100_mtd_exit); MODULE_AUTHOR("Nicolas Pitre"); MODULE_DESCRIPTION("SA1100 CFI map driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:flash"); +MODULE_ALIAS("platform:sa1100-mtd"); diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index c98c1570..47a33ce 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -139,7 +139,8 @@ static int atmel_nand_device_ready(struct mtd_info *mtd) struct nand_chip *nand_chip = mtd->priv; struct atmel_nand_host *host = nand_chip->priv; - return gpio_get_value(host->board->rdy_pin); + return gpio_get_value(host->board->rdy_pin) ^ + !!host->board->rdy_pin_active_low; } /* diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c index d15d8b7..54b52e5 100644 --- a/drivers/net/arm/etherh.c +++ b/drivers/net/arm/etherh.c @@ -646,7 +646,7 @@ static const struct net_device_ops etherh_netdev_ops = { .ndo_get_stats = ei_get_stats, .ndo_set_multicast_list = ei_set_multicast_list, .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_set_mac_addr, + .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = ei_poll, diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c index ad4cdd2..0b28fcc 100644 --- a/drivers/parport/parport_atari.c +++ b/drivers/parport/parport_atari.c @@ -84,7 +84,7 @@ parport_atari_frob_control(struct parport *p, unsigned char mask, static unsigned char parport_atari_read_status(struct parport *p) { - return ((mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) | + return ((st_mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) | PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR); } @@ -193,9 +193,9 @@ static int __init parport_atari_init(void) sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5); local_irq_restore(flags); /* MFP port I0 as input. */ - mfp.data_dir &= ~1; + st_mfp.data_dir &= ~1; /* MFP port I0 interrupt on high->low edge. */ - mfp.active_edge &= ~1; + st_mfp.active_edge &= ~1; p = parport_register_port((unsigned long)&sound_ym.wd_data, IRQ_MFP_BUSY, PARPORT_DMA_NONE, &parport_atari_ops); diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index 101ed49..032db81 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -64,6 +64,11 @@ struct parport_pc_pci { static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *card, int autoirq, int autodma) { + /* the rule described below doesn't hold for this device */ + if (dev->device == PCI_DEVICE_ID_NETMOS_9835 && + dev->subsystem_vendor == PCI_VENDOR_ID_IBM && + dev->subsystem_device == 0x0299) + return -ENODEV; /* * Netmos uses the subdevice ID to indicate the number of parallel * and serial ports. The form is 0x00PS, where <P> is the number of diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 3dfecb2..f3f6865 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -61,6 +61,8 @@ /* global iommu list, set NULL for ignored DMAR units */ static struct intel_iommu **g_iommus; +static int rwbf_quirk; + /* * 0: Present * 1-11: Reserved @@ -268,7 +270,12 @@ static long list_size; static void domain_remove_dev_info(struct dmar_domain *domain); -int dmar_disabled; +#ifdef CONFIG_DMAR_DEFAULT_ON +int dmar_disabled = 0; +#else +int dmar_disabled = 1; +#endif /*CONFIG_DMAR_DEFAULT_ON*/ + static int __initdata dmar_map_gfx = 1; static int dmar_forcedac; static int intel_iommu_strict; @@ -284,9 +291,12 @@ static int __init intel_iommu_setup(char *str) if (!str) return -EINVAL; while (*str) { - if (!strncmp(str, "off", 3)) { + if (!strncmp(str, "on", 2)) { + dmar_disabled = 0; + printk(KERN_INFO "Intel-IOMMU: enabled\n"); + } else if (!strncmp(str, "off", 3)) { dmar_disabled = 1; - printk(KERN_INFO"Intel-IOMMU: disabled\n"); + printk(KERN_INFO "Intel-IOMMU: disabled\n"); } else if (!strncmp(str, "igfx_off", 8)) { dmar_map_gfx = 0; printk(KERN_INFO @@ -777,7 +787,7 @@ static void iommu_flush_write_buffer(struct intel_iommu *iommu) u32 val; unsigned long flag; - if (!cap_rwbf(iommu->cap)) + if (!rwbf_quirk && !cap_rwbf(iommu->cap)) return; val = iommu->gcmd | DMA_GCMD_WBF; @@ -3129,3 +3139,15 @@ static struct iommu_ops intel_iommu_ops = { .unmap = intel_iommu_unmap_range, .iova_to_phys = intel_iommu_iova_to_phys, }; + +static void __devinit quirk_iommu_rwbf(struct pci_dev *dev) +{ + /* + * Mobile 4 Series Chipset neglects to set RWBF capability, + * but needs it: + */ + printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n"); + rwbf_quirk = 1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf); diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 44f15ff..baba2eb 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -103,14 +103,12 @@ static void msix_set_enable(struct pci_dev *dev, int enable) } } -/* - * Essentially, this is ((1 << (1 << x)) - 1), but without the - * undefinedness of a << 32. - */ static inline __attribute_const__ u32 msi_mask(unsigned x) { - static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff }; - return mask[x]; + /* Don't shift by >= width of type */ + if (x >= 5) + return 0xffffffff; + return (1 << (1 << x)) - 1; } static void msix_flush_writes(struct irq_desc *desc) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index ab1d615..93eac14 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -355,6 +355,8 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state) int i = 0; if (drv && drv->suspend) { + pci_power_t prev = pci_dev->current_state; + pci_dev->state_saved = false; i = drv->suspend(pci_dev, state); @@ -365,12 +367,16 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state) if (pci_dev->state_saved) goto Fixup; - if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0)) + if (pci_dev->current_state != PCI_D0 + && pci_dev->current_state != PCI_UNKNOWN) { + WARN_ONCE(pci_dev->current_state != prev, + "PCI PM: Device state not saved by %pF\n", + drv->suspend); goto Fixup; + } } pci_save_state(pci_dev); - pci_dev->state_saved = true; /* * This is for compatibility with existing code with legacy PM support. */ @@ -424,35 +430,20 @@ static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) pci_fixup_device(pci_fixup_resume_early, pci_dev); } -static int pci_pm_default_resume(struct pci_dev *pci_dev) +static void pci_pm_default_resume(struct pci_dev *pci_dev) { pci_fixup_device(pci_fixup_resume, pci_dev); if (!pci_is_bridge(pci_dev)) pci_enable_wake(pci_dev, PCI_D0, false); - - return pci_pm_reenable_device(pci_dev); -} - -static void pci_pm_default_suspend_generic(struct pci_dev *pci_dev) -{ - /* If device is enabled at this point, disable it */ - pci_disable_enabled_device(pci_dev); - /* - * Save state with interrupts enabled, because in principle the bus the - * device is on may be put into a low power state after this code runs. - */ - pci_save_state(pci_dev); } static void pci_pm_default_suspend(struct pci_dev *pci_dev) { - pci_pm_default_suspend_generic(pci_dev); - + /* Disable non-bridge devices without PM support */ if (!pci_is_bridge(pci_dev)) - pci_prepare_to_sleep(pci_dev); - - pci_fixup_device(pci_fixup_suspend, pci_dev); + pci_disable_enabled_device(pci_dev); + pci_save_state(pci_dev); } static bool pci_has_legacy_pm_support(struct pci_dev *pci_dev) @@ -497,21 +488,49 @@ static void pci_pm_complete(struct device *dev) static int pci_pm_suspend(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; - int error = 0; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_SUSPEND); - if (drv && drv->pm && drv->pm->suspend) { - error = drv->pm->suspend(dev); - suspend_report_result(drv->pm->suspend, error); + if (!pm) { + pci_pm_default_suspend(pci_dev); + goto Fixup; } - if (!error) - pci_pm_default_suspend(pci_dev); + pci_dev->state_saved = false; - return error; + if (pm->suspend) { + pci_power_t prev = pci_dev->current_state; + int error; + + error = pm->suspend(dev); + suspend_report_result(pm->suspend, error); + if (error) + return error; + + if (pci_dev->state_saved) + goto Fixup; + + if (pci_dev->current_state != PCI_D0 + && pci_dev->current_state != PCI_UNKNOWN) { + WARN_ONCE(pci_dev->current_state != prev, + "PCI PM: State of device not saved by %pF\n", + pm->suspend); + goto Fixup; + } + } + + if (!pci_dev->state_saved) { + pci_save_state(pci_dev); + if (!pci_is_bridge(pci_dev)) + pci_prepare_to_sleep(pci_dev); + } + + Fixup: + pci_fixup_device(pci_fixup_suspend, pci_dev); + + return 0; } static int pci_pm_suspend_noirq(struct device *dev) @@ -554,7 +573,7 @@ static int pci_pm_resume_noirq(struct device *dev) static int pci_pm_resume(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int error = 0; /* @@ -567,12 +586,16 @@ static int pci_pm_resume(struct device *dev) if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); - error = pci_pm_default_resume(pci_dev); + pci_pm_default_resume(pci_dev); - if (!error && drv && drv->pm && drv->pm->resume) - error = drv->pm->resume(dev); + if (pm) { + if (pm->resume) + error = pm->resume(dev); + } else { + pci_pm_reenable_device(pci_dev); + } - return error; + return 0; } #else /* !CONFIG_SUSPEND */ @@ -589,21 +612,31 @@ static int pci_pm_resume(struct device *dev) static int pci_pm_freeze(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; - int error = 0; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_FREEZE); - if (drv && drv->pm && drv->pm->freeze) { - error = drv->pm->freeze(dev); - suspend_report_result(drv->pm->freeze, error); + if (!pm) { + pci_pm_default_suspend(pci_dev); + return 0; } - if (!error) - pci_pm_default_suspend_generic(pci_dev); + pci_dev->state_saved = false; - return error; + if (pm->freeze) { + int error; + + error = pm->freeze(dev); + suspend_report_result(pm->freeze, error); + if (error) + return error; + } + + if (!pci_dev->state_saved) + pci_save_state(pci_dev); + + return 0; } static int pci_pm_freeze_noirq(struct device *dev) @@ -646,16 +679,18 @@ static int pci_pm_thaw_noirq(struct device *dev) static int pci_pm_thaw(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int error = 0; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); - pci_pm_reenable_device(pci_dev); - - if (drv && drv->pm && drv->pm->thaw) - error = drv->pm->thaw(dev); + if (pm) { + if (pm->thaw) + error = pm->thaw(dev); + } else { + pci_pm_reenable_device(pci_dev); + } return error; } @@ -663,22 +698,29 @@ static int pci_pm_thaw(struct device *dev) static int pci_pm_poweroff(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int error = 0; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_HIBERNATE); - if (!drv || !drv->pm) - return 0; + if (!pm) { + pci_pm_default_suspend(pci_dev); + goto Fixup; + } + + pci_dev->state_saved = false; - if (drv->pm->poweroff) { - error = drv->pm->poweroff(dev); - suspend_report_result(drv->pm->poweroff, error); + if (pm->poweroff) { + error = pm->poweroff(dev); + suspend_report_result(pm->poweroff, error); } - if (!error) - pci_pm_default_suspend(pci_dev); + if (!pci_dev->state_saved && !pci_is_bridge(pci_dev)) + pci_prepare_to_sleep(pci_dev); + + Fixup: + pci_fixup_device(pci_fixup_suspend, pci_dev); return error; } @@ -719,7 +761,7 @@ static int pci_pm_restore_noirq(struct device *dev) static int pci_pm_restore(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct device_driver *drv = dev->driver; + struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int error = 0; /* @@ -732,10 +774,14 @@ static int pci_pm_restore(struct device *dev) if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); - error = pci_pm_default_resume(pci_dev); + pci_pm_default_resume(pci_dev); - if (!error && drv && drv->pm && drv->pm->restore) - error = drv->pm->restore(dev); + if (pm) { + if (pm->restore) + error = pm->restore(dev); + } else { + pci_pm_reenable_device(pci_dev); + } return error; } diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index db7ec14..dfc4e0d 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -768,8 +768,8 @@ pci_read_rom(struct kobject *kobj, struct bin_attribute *bin_attr, return -EINVAL; rom = pci_map_rom(pdev, &size); /* size starts out as PCI window size */ - if (!rom) - return 0; + if (!rom || !size) + return -EIO; if (off >= size) count = 0; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 4880755..6d61200 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1418,10 +1418,10 @@ int pci_restore_standard_config(struct pci_dev *dev) break; } - dev->current_state = PCI_D0; + pci_update_current_state(dev, PCI_D0); Restore: - return pci_restore_state(dev); + return dev->state_saved ? pci_restore_state(dev) : 0; } /** @@ -1540,16 +1540,21 @@ void pci_release_region(struct pci_dev *pdev, int bar) } /** - * pci_request_region - Reserved PCI I/O and memory resource + * __pci_request_region - Reserved PCI I/O and memory resource * @pdev: PCI device whose resources are to be reserved * @bar: BAR to be reserved * @res_name: Name to be associated with resource. + * @exclusive: whether the region access is exclusive or not * * Mark the PCI region associated with PCI device @pdev BR @bar as * being reserved by owner @res_name. Do not access any * address inside the PCI regions unless this call returns * successfully. * + * If @exclusive is set, then the region is marked so that userspace + * is explicitly not allowed to map the resource via /dev/mem or + * sysfs MMIO access. + * * Returns 0 on success, or %EBUSY on error. A warning * message is also printed on failure. */ @@ -1588,12 +1593,12 @@ err_out: } /** - * pci_request_region - Reserved PCI I/O and memory resource + * pci_request_region - Reserve PCI I/O and memory resource * @pdev: PCI device whose resources are to be reserved * @bar: BAR to be reserved - * @res_name: Name to be associated with resource. + * @res_name: Name to be associated with resource * - * Mark the PCI region associated with PCI device @pdev BR @bar as + * Mark the PCI region associated with PCI device @pdev BAR @bar as * being reserved by owner @res_name. Do not access any * address inside the PCI regions unless this call returns * successfully. diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 26ddf78a..07c0aa5 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -16,21 +16,21 @@ extern int pci_mmap_fits(struct pci_dev *pdev, int resno, #endif /** - * Firmware PM callbacks + * struct pci_platform_pm_ops - Firmware PM callbacks * - * @is_manageable - returns 'true' if given device is power manageable by the - * platform firmware + * @is_manageable: returns 'true' if given device is power manageable by the + * platform firmware * - * @set_state - invokes the platform firmware to set the device's power state + * @set_state: invokes the platform firmware to set the device's power state * - * @choose_state - returns PCI power state of given device preferred by the - * platform; to be used during system-wide transitions from a - * sleeping state to the working state and vice versa + * @choose_state: returns PCI power state of given device preferred by the + * platform; to be used during system-wide transitions from a + * sleeping state to the working state and vice versa * - * @can_wakeup - returns 'true' if given device is capable of waking up the - * system from a sleeping state + * @can_wakeup: returns 'true' if given device is capable of waking up the + * system from a sleeping state * - * @sleep_wake - enables/disables the system wake up capability of given device + * @sleep_wake: enables/disables the system wake up capability of given device * * If given platform is generally capable of power managing PCI devices, all of * these callbacks are mandatory. diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 586b6f7..b0367f1 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -718,9 +718,9 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev) /* * All PCIe functions are in one slot, remove one function will remove - * the the whole slot, so just wait + * the whole slot, so just wait until we are the last function left. */ - if (!list_empty(&parent->subordinate->devices)) + if (!list_is_last(&pdev->bus_list, &parent->subordinate->devices)) goto out; /* All functions are removed, so just disable ASPM for the link */ diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 99a914a..f9b874e 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -55,25 +55,13 @@ static int pcie_portdrv_suspend(struct pci_dev *dev, pm_message_t state) } -static int pcie_portdrv_suspend_late(struct pci_dev *dev, pm_message_t state) -{ - return pci_save_state(dev); -} - -static int pcie_portdrv_resume_early(struct pci_dev *dev) -{ - return pci_restore_state(dev); -} - static int pcie_portdrv_resume(struct pci_dev *dev) { - pcie_portdrv_restore_config(dev); + pci_set_master(dev); return pcie_port_device_resume(dev); } #else #define pcie_portdrv_suspend NULL -#define pcie_portdrv_suspend_late NULL -#define pcie_portdrv_resume_early NULL #define pcie_portdrv_resume NULL #endif @@ -292,8 +280,6 @@ static struct pci_driver pcie_portdriver = { .remove = pcie_portdrv_remove, .suspend = pcie_portdrv_suspend, - .suspend_late = pcie_portdrv_suspend_late, - .resume_early = pcie_portdrv_resume_early, .resume = pcie_portdrv_resume, .err_handler = &pcie_portdrv_err_handler, diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 132a781..36864a9 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -55,6 +55,7 @@ void pci_disable_rom(struct pci_dev *pdev) /** * pci_get_rom_size - obtain the actual size of the ROM image + * @pdev: target PCI device * @rom: kernel virtual pointer to image of ROM * @size: size of PCI window * return: size of actual ROM image @@ -63,7 +64,7 @@ void pci_disable_rom(struct pci_dev *pdev) * The PCI window size could be much larger than the * actual image size. */ -size_t pci_get_rom_size(void __iomem *rom, size_t size) +size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size) { void __iomem *image; int last_image; @@ -72,8 +73,10 @@ size_t pci_get_rom_size(void __iomem *rom, size_t size) do { void __iomem *pds; /* Standard PCI ROMs start out with these bytes 55 AA */ - if (readb(image) != 0x55) + if (readb(image) != 0x55) { + dev_err(&pdev->dev, "Invalid ROM contents\n"); break; + } if (readb(image + 1) != 0xAA) break; /* get the PCI data structure and check its signature */ @@ -159,7 +162,7 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) * size is much larger than the actual size of the ROM. * True size is important if the ROM is going to be copied. */ - *size = pci_get_rom_size(rom, *size); + *size = pci_get_rom_size(pdev, rom, *size); return rom; } diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 1a266d4..b3866ad 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -42,6 +42,7 @@ config ASUS_LAPTOP depends on LEDS_CLASS depends on NEW_LEDS depends on BACKLIGHT_CLASS_DEVICE + depends on INPUT ---help--- This is the new Linux driver for Asus laptops. It may also support some MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate @@ -61,6 +62,7 @@ config DELL_LAPTOP depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL + depends on POWER_SUPPLY default n ---help--- This driver adds support for rfkill and backlight control to Dell @@ -300,6 +302,7 @@ config INTEL_MENLOW config EEEPC_LAPTOP tristate "Eee PC Hotkey Driver (EXPERIMENTAL)" depends on ACPI + depends on INPUT depends on EXPERIMENTAL select BACKLIGHT_CLASS_DEVICE select HWMON diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index 8fb8b35..56af6cf 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -46,6 +46,7 @@ #include <acpi/acpi_drivers.h> #include <acpi/acpi_bus.h> #include <asm/uaccess.h> +#include <linux/input.h> #define ASUS_LAPTOP_VERSION "0.42" @@ -181,6 +182,8 @@ struct asus_hotk { u8 light_level; //light sensor level u8 light_switch; //light sensor switch value u16 event_count[128]; //count for each event TODO make this better + struct input_dev *inputdev; + u16 *keycode_map; }; /* @@ -250,6 +253,37 @@ ASUS_LED(rled, "record"); ASUS_LED(pled, "phone"); ASUS_LED(gled, "gaming"); +struct key_entry { + char type; + u8 code; + u16 keycode; +}; + +enum { KE_KEY, KE_END }; + +static struct key_entry asus_keymap[] = { + {KE_KEY, 0x30, KEY_VOLUMEUP}, + {KE_KEY, 0x31, KEY_VOLUMEDOWN}, + {KE_KEY, 0x32, KEY_MUTE}, + {KE_KEY, 0x33, KEY_SWITCHVIDEOMODE}, + {KE_KEY, 0x34, KEY_SWITCHVIDEOMODE}, + {KE_KEY, 0x40, KEY_PREVIOUSSONG}, + {KE_KEY, 0x41, KEY_NEXTSONG}, + {KE_KEY, 0x43, KEY_STOP}, + {KE_KEY, 0x45, KEY_PLAYPAUSE}, + {KE_KEY, 0x50, KEY_EMAIL}, + {KE_KEY, 0x51, KEY_WWW}, + {KE_KEY, 0x5C, BTN_EXTRA}, /* Performance */ + {KE_KEY, 0x5D, KEY_WLAN}, + {KE_KEY, 0x61, KEY_SWITCHVIDEOMODE}, + {KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */ + {KE_KEY, 0x82, KEY_CAMERA}, + {KE_KEY, 0x8A, KEY_TV}, + {KE_KEY, 0x95, KEY_MEDIA}, + {KE_KEY, 0x99, KEY_PHONE}, + {KE_END, 0}, +}; + /* * This function evaluates an ACPI method, given an int as parameter, the * method is searched within the scope of the handle, can be NULL. The output @@ -720,8 +754,68 @@ static ssize_t store_gps(struct device *dev, struct device_attribute *attr, return store_status(buf, count, NULL, GPS_ON); } +/* + * Hotkey functions + */ +static struct key_entry *asus_get_entry_by_scancode(int code) +{ + struct key_entry *key; + + for (key = asus_keymap; key->type != KE_END; key++) + if (code == key->code) + return key; + + return NULL; +} + +static struct key_entry *asus_get_entry_by_keycode(int code) +{ + struct key_entry *key; + + for (key = asus_keymap; key->type != KE_END; key++) + if (code == key->keycode && key->type == KE_KEY) + return key; + + return NULL; +} + +static int asus_getkeycode(struct input_dev *dev, int scancode, int *keycode) +{ + struct key_entry *key = asus_get_entry_by_scancode(scancode); + + if (key && key->type == KE_KEY) { + *keycode = key->keycode; + return 0; + } + + return -EINVAL; +} + +static int asus_setkeycode(struct input_dev *dev, int scancode, int keycode) +{ + struct key_entry *key; + int old_keycode; + + if (keycode < 0 || keycode > KEY_MAX) + return -EINVAL; + + key = asus_get_entry_by_scancode(scancode); + if (key && key->type == KE_KEY) { + old_keycode = key->keycode; + key->keycode = keycode; + set_bit(keycode, dev->keybit); + if (!asus_get_entry_by_keycode(old_keycode)) + clear_bit(old_keycode, dev->keybit); + return 0; + } + + return -EINVAL; +} + static void asus_hotk_notify(acpi_handle handle, u32 event, void *data) { + static struct key_entry *key; + /* TODO Find a better way to handle events count. */ if (!hotk) return; @@ -738,10 +832,24 @@ static void asus_hotk_notify(acpi_handle handle, u32 event, void *data) lcd_blank(FB_BLANK_POWERDOWN); } - acpi_bus_generate_proc_event(hotk->device, event, - hotk->event_count[event % 128]++); - - return; + acpi_bus_generate_netlink_event(hotk->device->pnp.device_class, + dev_name(&hotk->device->dev), event, + hotk->event_count[event % 128]++); + + if (hotk->inputdev) { + key = asus_get_entry_by_scancode(event); + if (!key) + return ; + + switch (key->type) { + case KE_KEY: + input_report_key(hotk->inputdev, key->keycode, 1); + input_sync(hotk->inputdev); + input_report_key(hotk->inputdev, key->keycode, 0); + input_sync(hotk->inputdev); + break; + } + } } #define ASUS_CREATE_DEVICE_ATTR(_name) \ @@ -959,6 +1067,38 @@ static int asus_hotk_get_info(void) return AE_OK; } +static int asus_input_init(void) +{ + const struct key_entry *key; + int result; + + hotk->inputdev = input_allocate_device(); + if (!hotk->inputdev) { + printk(ASUS_INFO "Unable to allocate input device\n"); + return 0; + } + hotk->inputdev->name = "Asus Laptop extra buttons"; + hotk->inputdev->phys = ASUS_HOTK_FILE "/input0"; + hotk->inputdev->id.bustype = BUS_HOST; + hotk->inputdev->getkeycode = asus_getkeycode; + hotk->inputdev->setkeycode = asus_setkeycode; + + for (key = asus_keymap; key->type != KE_END; key++) { + switch (key->type) { + case KE_KEY: + set_bit(EV_KEY, hotk->inputdev->evbit); + set_bit(key->keycode, hotk->inputdev->keybit); + break; + } + } + result = input_register_device(hotk->inputdev); + if (result) { + printk(ASUS_INFO "Unable to register input device\n"); + input_free_device(hotk->inputdev); + } + return result; +} + static int asus_hotk_check(void) { int result = 0; @@ -1044,7 +1184,7 @@ static int asus_hotk_add(struct acpi_device *device) /* GPS is on by default */ write_status(NULL, 1, GPS_ON); - end: +end: if (result) { kfree(hotk->name); kfree(hotk); @@ -1091,10 +1231,17 @@ static void asus_led_exit(void) ASUS_LED_UNREGISTER(gled); } +static void asus_input_exit(void) +{ + if (hotk->inputdev) + input_unregister_device(hotk->inputdev); +} + static void __exit asus_laptop_exit(void) { asus_backlight_exit(); asus_led_exit(); + asus_input_exit(); acpi_bus_unregister_driver(&asus_hotk_driver); sysfs_remove_group(&asuspf_device->dev.kobj, &asuspf_attribute_group); @@ -1216,6 +1363,10 @@ static int __init asus_laptop_init(void) printk(ASUS_INFO "Brightness ignored, must be controlled by " "ACPI video driver\n"); + result = asus_input_init(); + if (result) + goto fail_input; + result = asus_led_init(dev); if (result) goto fail_led; @@ -1242,22 +1393,25 @@ static int __init asus_laptop_init(void) return 0; - fail_sysfs: +fail_sysfs: platform_device_del(asuspf_device); - fail_platform_device2: +fail_platform_device2: platform_device_put(asuspf_device); - fail_platform_device1: +fail_platform_device1: platform_driver_unregister(&asuspf_driver); - fail_platform_driver: +fail_platform_driver: asus_led_exit(); - fail_led: +fail_led: + asus_input_exit(); + +fail_input: asus_backlight_exit(); - fail_backlight: +fail_backlight: return result; } diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c index 1e74988..d63f26e 100644 --- a/drivers/platform/x86/asus_acpi.c +++ b/drivers/platform/x86/asus_acpi.c @@ -143,6 +143,7 @@ struct asus_hotk { S1300N, S5200N*/ A4S, /* Z81sp */ F3Sa, /* (Centrino) */ + R1F, END_MODEL } model; /* Models currently supported */ u16 event_count[128]; /* Count for each event TODO make this better */ @@ -420,7 +421,18 @@ static struct model_data model_conf[END_MODEL] = { .display_get = "\\ADVG", .display_set = "SDSP", }, - + { + .name = "R1F", + .mt_bt_switch = "BLED", + .mt_mled = "MLED", + .mt_wled = "WLED", + .mt_lcd_switch = "\\Q10", + .lcd_status = "\\GP06", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\INFB" + } }; /* procdir we use */ @@ -1165,6 +1177,8 @@ static int asus_model_match(char *model) return W3V; else if (strncmp(model, "W5A", 3) == 0) return W5A; + else if (strncmp(model, "R1F", 3) == 0) + return R1F; else if (strncmp(model, "A4S", 3) == 0) return A4S; else if (strncmp(model, "F3Sa", 4) == 0) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 9d93cb9..786ed86 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -30,6 +30,7 @@ #include <linux/uaccess.h> #include <linux/input.h> #include <linux/rfkill.h> +#include <linux/pci.h> #define EEEPC_LAPTOP_VERSION "0.1" @@ -161,6 +162,10 @@ static struct key_entry eeepc_keymap[] = { {KE_KEY, 0x13, KEY_MUTE }, {KE_KEY, 0x14, KEY_VOLUMEDOWN }, {KE_KEY, 0x15, KEY_VOLUMEUP }, + {KE_KEY, 0x1a, KEY_COFFEE }, + {KE_KEY, 0x1b, KEY_ZOOM }, + {KE_KEY, 0x1c, KEY_PROG2 }, + {KE_KEY, 0x1d, KEY_PROG3 }, {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE }, @@ -510,7 +515,43 @@ static int eeepc_hotk_check(void) static void notify_brn(void) { struct backlight_device *bd = eeepc_backlight_device; - bd->props.brightness = read_brightness(bd); + if (bd) + bd->props.brightness = read_brightness(bd); +} + +static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) +{ + struct pci_dev *dev; + struct pci_bus *bus = pci_find_bus(0, 1); + + if (event != ACPI_NOTIFY_BUS_CHECK) + return; + + if (!bus) { + printk(EEEPC_WARNING "Unable to find PCI bus 1?\n"); + return; + } + + if (get_acpi(CM_ASL_WLAN) == 1) { + dev = pci_get_slot(bus, 0); + if (dev) { + /* Device already present */ + pci_dev_put(dev); + return; + } + dev = pci_scan_single_device(bus, 0); + if (dev) { + pci_bus_assign_resources(bus); + if (pci_bus_add_device(dev)) + printk(EEEPC_ERR "Unable to hotplug wifi\n"); + } + } else { + dev = pci_get_slot(bus, 0); + if (dev) { + pci_remove_bus_device(dev); + pci_dev_put(dev); + } + } } static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) @@ -520,8 +561,9 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) return; if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX) notify_brn(); - acpi_bus_generate_proc_event(ehotk->device, event, - ehotk->event_count[event % 128]++); + acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class, + dev_name(&ehotk->device->dev), event, + ehotk->event_count[event % 128]++); if (ehotk->inputdev) { key = eepc_get_entry_by_scancode(event); if (key) { @@ -539,6 +581,45 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) } } +static int eeepc_register_rfkill_notifier(char *node) +{ + acpi_status status = AE_OK; + acpi_handle handle; + + status = acpi_get_handle(NULL, node, &handle); + + if (ACPI_SUCCESS(status)) { + status = acpi_install_notify_handler(handle, + ACPI_SYSTEM_NOTIFY, + eeepc_rfkill_notify, + NULL); + if (ACPI_FAILURE(status)) + printk(EEEPC_WARNING + "Failed to register notify on %s\n", node); + } else + return -ENODEV; + + return 0; +} + +static void eeepc_unregister_rfkill_notifier(char *node) +{ + acpi_status status = AE_OK; + acpi_handle handle; + + status = acpi_get_handle(NULL, node, &handle); + + if (ACPI_SUCCESS(status)) { + status = acpi_remove_notify_handler(handle, + ACPI_SYSTEM_NOTIFY, + eeepc_rfkill_notify); + if (ACPI_FAILURE(status)) + printk(EEEPC_ERR + "Error removing rfkill notify handler %s\n", + node); + } +} + static int eeepc_hotk_add(struct acpi_device *device) { acpi_status status = AE_OK; @@ -558,7 +639,7 @@ static int eeepc_hotk_add(struct acpi_device *device) ehotk->device = device; result = eeepc_hotk_check(); if (result) - goto end; + goto ehotk_fail; status = acpi_install_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY, eeepc_hotk_notify, ehotk); if (ACPI_FAILURE(status)) @@ -569,18 +650,25 @@ static int eeepc_hotk_add(struct acpi_device *device) RFKILL_TYPE_WLAN); if (!ehotk->eeepc_wlan_rfkill) - goto end; + goto wlan_fail; ehotk->eeepc_wlan_rfkill->name = "eeepc-wlan"; ehotk->eeepc_wlan_rfkill->toggle_radio = eeepc_wlan_rfkill_set; ehotk->eeepc_wlan_rfkill->get_state = eeepc_wlan_rfkill_state; - if (get_acpi(CM_ASL_WLAN) == 1) + if (get_acpi(CM_ASL_WLAN) == 1) { ehotk->eeepc_wlan_rfkill->state = RFKILL_STATE_UNBLOCKED; - else + rfkill_set_default(RFKILL_TYPE_WLAN, + RFKILL_STATE_UNBLOCKED); + } else { ehotk->eeepc_wlan_rfkill->state = RFKILL_STATE_SOFT_BLOCKED; - rfkill_register(ehotk->eeepc_wlan_rfkill); + rfkill_set_default(RFKILL_TYPE_WLAN, + RFKILL_STATE_SOFT_BLOCKED); + } + result = rfkill_register(ehotk->eeepc_wlan_rfkill); + if (result) + goto wlan_fail; } if (get_acpi(CM_ASL_BLUETOOTH) != -1) { @@ -588,27 +676,47 @@ static int eeepc_hotk_add(struct acpi_device *device) rfkill_allocate(&device->dev, RFKILL_TYPE_BLUETOOTH); if (!ehotk->eeepc_bluetooth_rfkill) - goto end; + goto bluetooth_fail; ehotk->eeepc_bluetooth_rfkill->name = "eeepc-bluetooth"; ehotk->eeepc_bluetooth_rfkill->toggle_radio = eeepc_bluetooth_rfkill_set; ehotk->eeepc_bluetooth_rfkill->get_state = eeepc_bluetooth_rfkill_state; - if (get_acpi(CM_ASL_BLUETOOTH) == 1) + if (get_acpi(CM_ASL_BLUETOOTH) == 1) { ehotk->eeepc_bluetooth_rfkill->state = RFKILL_STATE_UNBLOCKED; - else + rfkill_set_default(RFKILL_TYPE_BLUETOOTH, + RFKILL_STATE_UNBLOCKED); + } else { ehotk->eeepc_bluetooth_rfkill->state = RFKILL_STATE_SOFT_BLOCKED; - rfkill_register(ehotk->eeepc_bluetooth_rfkill); - } + rfkill_set_default(RFKILL_TYPE_BLUETOOTH, + RFKILL_STATE_SOFT_BLOCKED); + } - end: - if (result) { - kfree(ehotk); - ehotk = NULL; + result = rfkill_register(ehotk->eeepc_bluetooth_rfkill); + if (result) + goto bluetooth_fail; } + + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); + + return 0; + + bluetooth_fail: + if (ehotk->eeepc_bluetooth_rfkill) + rfkill_free(ehotk->eeepc_bluetooth_rfkill); + rfkill_unregister(ehotk->eeepc_wlan_rfkill); + ehotk->eeepc_wlan_rfkill = NULL; + wlan_fail: + if (ehotk->eeepc_wlan_rfkill) + rfkill_free(ehotk->eeepc_wlan_rfkill); + ehotk_fail: + kfree(ehotk); + ehotk = NULL; + return result; } @@ -622,6 +730,10 @@ static int eeepc_hotk_remove(struct acpi_device *device, int type) eeepc_hotk_notify); if (ACPI_FAILURE(status)) printk(EEEPC_ERR "Error removing notify handler\n"); + + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); + kfree(ehotk); return 0; } @@ -737,13 +849,21 @@ static void eeepc_backlight_exit(void) { if (eeepc_backlight_device) backlight_device_unregister(eeepc_backlight_device); - if (ehotk->inputdev) - input_unregister_device(ehotk->inputdev); + eeepc_backlight_device = NULL; +} + +static void eeepc_rfkill_exit(void) +{ if (ehotk->eeepc_wlan_rfkill) rfkill_unregister(ehotk->eeepc_wlan_rfkill); if (ehotk->eeepc_bluetooth_rfkill) rfkill_unregister(ehotk->eeepc_bluetooth_rfkill); - eeepc_backlight_device = NULL; +} + +static void eeepc_input_exit(void) +{ + if (ehotk->inputdev) + input_unregister_device(ehotk->inputdev); } static void eeepc_hwmon_exit(void) @@ -762,6 +882,8 @@ static void eeepc_hwmon_exit(void) static void __exit eeepc_laptop_exit(void) { eeepc_backlight_exit(); + eeepc_rfkill_exit(); + eeepc_input_exit(); eeepc_hwmon_exit(); acpi_bus_unregister_driver(&eeepc_hotk_driver); sysfs_remove_group(&platform_device->dev.kobj, @@ -865,6 +987,8 @@ fail_platform_driver: fail_hwmon: eeepc_backlight_exit(); fail_backlight: + eeepc_input_exit(); + eeepc_rfkill_exit(); return result; } diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 65dc415..45940f3 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -166,6 +166,7 @@ struct fujitsu_hotkey_t { struct platform_device *pf_device; struct kfifo *fifo; spinlock_t fifo_lock; + int rfkill_supported; int rfkill_state; int logolamp_registered; int kblamps_registered; @@ -526,7 +527,7 @@ static ssize_t show_lid_state(struct device *dev, struct device_attribute *attr, char *buf) { - if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD) + if (!(fujitsu_hotkey->rfkill_supported & 0x100)) return sprintf(buf, "unknown\n"); if (fujitsu_hotkey->rfkill_state & 0x100) return sprintf(buf, "open\n"); @@ -538,7 +539,7 @@ static ssize_t show_dock_state(struct device *dev, struct device_attribute *attr, char *buf) { - if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD) + if (!(fujitsu_hotkey->rfkill_supported & 0x200)) return sprintf(buf, "unknown\n"); if (fujitsu_hotkey->rfkill_state & 0x200) return sprintf(buf, "docked\n"); @@ -550,7 +551,7 @@ static ssize_t show_radios_state(struct device *dev, struct device_attribute *attr, char *buf) { - if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD) + if (!(fujitsu_hotkey->rfkill_supported & 0x20)) return sprintf(buf, "unknown\n"); if (fujitsu_hotkey->rfkill_state & 0x20) return sprintf(buf, "on\n"); @@ -928,8 +929,17 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) ; /* No action, result is discarded */ vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i); - fujitsu_hotkey->rfkill_state = - call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); + fujitsu_hotkey->rfkill_supported = + call_fext_func(FUNC_RFKILL, 0x0, 0x0, 0x0); + + /* Make sure our bitmask of supported functions is cleared if the + RFKILL function block is not implemented, like on the S7020. */ + if (fujitsu_hotkey->rfkill_supported == UNSUPPORTED_CMD) + fujitsu_hotkey->rfkill_supported = 0; + + if (fujitsu_hotkey->rfkill_supported) + fujitsu_hotkey->rfkill_state = + call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); /* Suspect this is a keymap of the application panel, print it */ printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n", @@ -1005,8 +1015,9 @@ static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event, input = fujitsu_hotkey->input; - fujitsu_hotkey->rfkill_state = - call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); + if (fujitsu_hotkey->rfkill_supported) + fujitsu_hotkey->rfkill_state = + call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); switch (event) { case ACPI_FUJITSU_NOTIFY_CODE1: diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index de91dda..f41135f 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -463,9 +463,11 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) return 0; register_wwan_err: - rfkill_unregister(bluetooth_rfkill); + if (bluetooth_rfkill) + rfkill_unregister(bluetooth_rfkill); register_bluetooth_error: - rfkill_unregister(wifi_rfkill); + if (wifi_rfkill) + rfkill_unregister(wifi_rfkill); add_sysfs_error: cleanup_sysfs(device); return err; diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index f30db36..c47a44d 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -507,7 +507,7 @@ static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc) hkey_num = result & 0xf; - if (hkey_num < 0 || hkey_num > ARRAY_SIZE(pcc->keymap)) { + if (hkey_num < 0 || hkey_num >= ARRAY_SIZE(pcc->keymap)) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "hotkey number out of range: %d\n", hkey_num)); diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index e988ec1..41aec2a 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -199,7 +199,8 @@ static int adapter_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { - struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb); + struct pcf50633_mbc *mbc = container_of(psy, + struct pcf50633_mbc, adapter); int ret = 0; switch (psp) { diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index cced4d1..81450fb 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -241,6 +241,12 @@ config RTC_DRV_M41T80_WDT If you say Y here you will get support for the watchdog timer in the ST M41T60 and M41T80 RTC chips series. +config RTC_DRV_DM355EVM + tristate "TI DaVinci DM355 EVM RTC" + depends on MFD_DM355EVM_MSP + help + Supports the RTC firmware in the MSP430 on the DM355 EVM. + config RTC_DRV_TWL92330 boolean "TI TWL92330/Menelaus" depends on MENELAUS diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 6e28021..0e697aa 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o +obj-$(CONFIG_RTC_DRV_DM355EVM) += rtc-dm355evm.o obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o obj-$(CONFIG_RTC_DRV_DS1286) += rtc-ds1286.o obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o diff --git a/drivers/rtc/rtc-au1xxx.c b/drivers/rtc/rtc-au1xxx.c index 8906a68..979ed04 100644 --- a/drivers/rtc/rtc-au1xxx.c +++ b/drivers/rtc/rtc-au1xxx.c @@ -81,7 +81,7 @@ static int __devinit au1xtoy_rtc_probe(struct platform_device *pdev) if (au_readl(SYS_TOYTRIM) != 32767) { /* wait until hardware gives access to TRIM register */ t = 0x00100000; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S) && t--) + while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S) && --t) msleep(1); if (!t) { diff --git a/drivers/rtc/rtc-dm355evm.c b/drivers/rtc/rtc-dm355evm.c new file mode 100644 index 0000000..58d4e18 --- /dev/null +++ b/drivers/rtc/rtc-dm355evm.c @@ -0,0 +1,175 @@ +/* + * rtc-dm355evm.c - access battery-backed counter in MSP430 firmware + * + * Copyright (c) 2008 by David Brownell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/rtc.h> +#include <linux/platform_device.h> + +#include <linux/i2c/dm355evm_msp.h> + + +/* + * The MSP430 firmware on the DM355 EVM uses a watch crystal to feed + * a 1 Hz counter. When a backup battery is supplied, that makes a + * reasonable RTC for applications where alarms and non-NTP drift + * compensation aren't important. + * + * The only real glitch is the inability to read or write all four + * counter bytes atomically: the count may increment in the middle + * of an operation, causing trouble when the LSB rolls over. + * + * This driver was tested with firmware revision A4. + */ +union evm_time { + u8 bytes[4]; + u32 value; +}; + +static int dm355evm_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + union evm_time time; + int status; + int tries = 0; + + do { + /* + * Read LSB(0) to MSB(3) bytes. Defend against the counter + * rolling over by re-reading until the value is stable, + * and assuming the four reads take at most a few seconds. + */ + status = dm355evm_msp_read(DM355EVM_MSP_RTC_0); + if (status < 0) + return status; + if (tries && time.bytes[0] == status) + break; + time.bytes[0] = status; + + status = dm355evm_msp_read(DM355EVM_MSP_RTC_1); + if (status < 0) + return status; + if (tries && time.bytes[1] == status) + break; + time.bytes[1] = status; + + status = dm355evm_msp_read(DM355EVM_MSP_RTC_2); + if (status < 0) + return status; + if (tries && time.bytes[2] == status) + break; + time.bytes[2] = status; + + status = dm355evm_msp_read(DM355EVM_MSP_RTC_3); + if (status < 0) + return status; + if (tries && time.bytes[3] == status) + break; + time.bytes[3] = status; + + } while (++tries < 5); + + dev_dbg(dev, "read timestamp %08x\n", time.value); + + rtc_time_to_tm(le32_to_cpu(time.value), tm); + return 0; +} + +static int dm355evm_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + union evm_time time; + unsigned long value; + int status; + + rtc_tm_to_time(tm, &value); + time.value = cpu_to_le32(value); + + dev_dbg(dev, "write timestamp %08x\n", time.value); + + /* + * REVISIT handle non-atomic writes ... maybe just retry until + * byte[1] sticks (no rollover)? + */ + status = dm355evm_msp_write(time.bytes[0], DM355EVM_MSP_RTC_0); + if (status < 0) + return status; + + status = dm355evm_msp_write(time.bytes[1], DM355EVM_MSP_RTC_1); + if (status < 0) + return status; + + status = dm355evm_msp_write(time.bytes[2], DM355EVM_MSP_RTC_2); + if (status < 0) + return status; + + status = dm355evm_msp_write(time.bytes[3], DM355EVM_MSP_RTC_3); + if (status < 0) + return status; + + return 0; +} + +static struct rtc_class_ops dm355evm_rtc_ops = { + .read_time = dm355evm_rtc_read_time, + .set_time = dm355evm_rtc_set_time, +}; + +/*----------------------------------------------------------------------*/ + +static int __devinit dm355evm_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc; + + rtc = rtc_device_register(pdev->name, + &pdev->dev, &dm355evm_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + dev_err(&pdev->dev, "can't register RTC device, err %ld\n", + PTR_ERR(rtc)); + return PTR_ERR(rtc); + } + platform_set_drvdata(pdev, rtc); + + return 0; +} + +static int __devexit dm355evm_rtc_remove(struct platform_device *pdev) +{ + struct rtc_device *rtc = platform_get_drvdata(pdev); + + rtc_device_unregister(rtc); + platform_set_drvdata(pdev, NULL); + return 0; +} + +/* + * I2C is used to talk to the MSP430, but this platform device is + * exposed by an MFD driver that manages I2C communications. + */ +static struct platform_driver rtc_dm355evm_driver = { + .probe = dm355evm_rtc_probe, + .remove = __devexit_p(dm355evm_rtc_remove), + .driver = { + .owner = THIS_MODULE, + .name = "rtc-dm355evm", + }, +}; + +static int __init dm355evm_rtc_init(void) +{ + return platform_driver_register(&rtc_dm355evm_driver); +} +module_init(dm355evm_rtc_init); + +static void __exit dm355evm_rtc_exit(void) +{ + platform_driver_unregister(&rtc_dm355evm_driver); +} +module_exit(dm355evm_rtc_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c index e54b5c6..e01b955 100644 --- a/drivers/rtc/rtc-ds1390.c +++ b/drivers/rtc/rtc-ds1390.c @@ -122,7 +122,6 @@ static const struct rtc_class_ops ds1390_rtc_ops = { static int __devinit ds1390_probe(struct spi_device *spi) { - struct rtc_device *rtc; unsigned char tmp; struct ds1390 *chip; int res; diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c index bd56a03..bb8cc05 100644 --- a/drivers/rtc/rtc-pxa.c +++ b/drivers/rtc/rtc-pxa.c @@ -485,7 +485,7 @@ static void __exit pxa_rtc_exit(void) module_init(pxa_rtc_init); module_exit(pxa_rtc_exit); -MODULE_AUTHOR("Robert Jarzmik"); +MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>"); MODULE_DESCRIPTION("PXA27x/PXA3xx Realtime Clock Driver (RTC)"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:pxa-rtc"); diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index bd59149..08c23a9 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -57,6 +57,8 @@ static void dasd_device_tasklet(struct dasd_device *); static void dasd_block_tasklet(struct dasd_block *); static void do_kick_device(struct work_struct *); static void dasd_return_cqr_cb(struct dasd_ccw_req *, void *); +static void dasd_device_timeout(unsigned long); +static void dasd_block_timeout(unsigned long); /* * SECTION: Operations on the device structure. @@ -99,6 +101,8 @@ struct dasd_device *dasd_alloc_device(void) (unsigned long) device); INIT_LIST_HEAD(&device->ccw_queue); init_timer(&device->timer); + device->timer.function = dasd_device_timeout; + device->timer.data = (unsigned long) device; INIT_WORK(&device->kick_work, do_kick_device); device->state = DASD_STATE_NEW; device->target = DASD_STATE_NEW; @@ -138,6 +142,8 @@ struct dasd_block *dasd_alloc_block(void) INIT_LIST_HEAD(&block->ccw_queue); spin_lock_init(&block->queue_lock); init_timer(&block->timer); + block->timer.function = dasd_block_timeout; + block->timer.data = (unsigned long) block; return block; } @@ -915,19 +921,10 @@ static void dasd_device_timeout(unsigned long ptr) */ void dasd_device_set_timer(struct dasd_device *device, int expires) { - if (expires == 0) { - if (timer_pending(&device->timer)) - del_timer(&device->timer); - return; - } - if (timer_pending(&device->timer)) { - if (mod_timer(&device->timer, jiffies + expires)) - return; - } - device->timer.function = dasd_device_timeout; - device->timer.data = (unsigned long) device; - device->timer.expires = jiffies + expires; - add_timer(&device->timer); + if (expires == 0) + del_timer(&device->timer); + else + mod_timer(&device->timer, jiffies + expires); } /* @@ -935,8 +932,7 @@ void dasd_device_set_timer(struct dasd_device *device, int expires) */ void dasd_device_clear_timer(struct dasd_device *device) { - if (timer_pending(&device->timer)) - del_timer(&device->timer); + del_timer(&device->timer); } static void dasd_handle_killed_request(struct ccw_device *cdev, @@ -1586,19 +1582,10 @@ static void dasd_block_timeout(unsigned long ptr) */ void dasd_block_set_timer(struct dasd_block *block, int expires) { - if (expires == 0) { - if (timer_pending(&block->timer)) - del_timer(&block->timer); - return; - } - if (timer_pending(&block->timer)) { - if (mod_timer(&block->timer, jiffies + expires)) - return; - } - block->timer.function = dasd_block_timeout; - block->timer.data = (unsigned long) block; - block->timer.expires = jiffies + expires; - add_timer(&block->timer); + if (expires == 0) + del_timer(&block->timer); + else + mod_timer(&block->timer, jiffies + expires); } /* @@ -1606,8 +1593,7 @@ void dasd_block_set_timer(struct dasd_block *block, int expires) */ void dasd_block_clear_timer(struct dasd_block *block) { - if (timer_pending(&block->timer)) - del_timer(&block->timer); + del_timer(&block->timer); } /* diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index 300e28a..3433990 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -677,7 +677,7 @@ static ssize_t dasd_ff_show(struct device *dev, struct device_attribute *attr, struct dasd_devmap *devmap; int ff_flag; - devmap = dasd_find_busid(dev->bus_id); + devmap = dasd_find_busid(dev_name(dev)); if (!IS_ERR(devmap)) ff_flag = (devmap->features & DASD_FEATURE_FAILFAST) != 0; else diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index 1fd8f21..4377e93 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -280,8 +280,11 @@ sclp_dispatch_evbufs(struct sccb_header *sccb) rc = 0; for (offset = sizeof(struct sccb_header); offset < sccb->length; offset += evbuf->length) { - /* Search for event handler */ evbuf = (struct evbuf_header *) ((addr_t) sccb + offset); + /* Check for malformed hardware response */ + if (evbuf->length == 0) + break; + /* Search for event handler */ reg = NULL; list_for_each(l, &sclp_reg_list) { reg = list_entry(l, struct sclp_register, list); diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 5063904..77ab6e3 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -19,6 +19,7 @@ #include <linux/memory.h> #include <asm/chpid.h> #include <asm/sclp.h> +#include <asm/setup.h> #include "sclp.h" @@ -474,6 +475,10 @@ static void __init add_memory_merged(u16 rn) goto skip_add; if (start + size > VMEM_MAX_PHYS) size = VMEM_MAX_PHYS - start; + if (memory_end_set && (start >= memory_end)) + goto skip_add; + if (memory_end_set && (start + size > memory_end)) + size = memory_end - start; add_memory(0, start, size); skip_add: first_rn = rn; diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index a1a511b..ed1e728 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -1573,9 +1573,6 @@ static int ibmvfc_queuecommand(struct scsi_cmnd *cmnd, vfc_cmd->resp_len = sizeof(vfc_cmd->rsp); vfc_cmd->cancel_key = (unsigned long)cmnd->device->hostdata; vfc_cmd->tgt_scsi_id = rport->port_id; - if ((rport->supported_classes & FC_COS_CLASS3) && - (fc_host_supported_classes(vhost->host) & FC_COS_CLASS3)) - vfc_cmd->flags = IBMVFC_CLASS_3_ERR; vfc_cmd->iu.xfer_len = scsi_bufflen(cmnd); int_to_scsilun(cmnd->device->lun, &vfc_cmd->iu.lun); memcpy(vfc_cmd->iu.cdb, cmnd->cmnd, cmnd->cmd_len); @@ -3266,6 +3263,7 @@ static int ibmvfc_alloc_target(struct ibmvfc_host *vhost, u64 scsi_id) return -ENOMEM; } + memset(tgt, 0, sizeof(*tgt)); tgt->scsi_id = scsi_id; tgt->new_scsi_id = scsi_id; tgt->vhost = vhost; @@ -3576,9 +3574,18 @@ static void ibmvfc_log_ae(struct ibmvfc_host *vhost, int events) static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt) { struct ibmvfc_host *vhost = tgt->vhost; - struct fc_rport *rport; + struct fc_rport *rport = tgt->rport; unsigned long flags; + if (rport) { + tgt_dbg(tgt, "Setting rport roles\n"); + fc_remote_port_rolechg(rport, tgt->ids.roles); + spin_lock_irqsave(vhost->host->host_lock, flags); + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE); + spin_unlock_irqrestore(vhost->host->host_lock, flags); + return; + } + tgt_dbg(tgt, "Adding rport\n"); rport = fc_remote_port_add(vhost->host, 0, &tgt->ids); spin_lock_irqsave(vhost->host->host_lock, flags); diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h index 87dafd0..b21e071 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.h +++ b/drivers/scsi/ibmvscsi/ibmvfc.h @@ -32,7 +32,7 @@ #define IBMVFC_DRIVER_VERSION "1.0.4" #define IBMVFC_DRIVER_DATE "(November 14, 2008)" -#define IBMVFC_DEFAULT_TIMEOUT 15 +#define IBMVFC_DEFAULT_TIMEOUT 60 #define IBMVFC_INIT_TIMEOUT 120 #define IBMVFC_MAX_REQUESTS_DEFAULT 100 diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 74d07d1..c9aa761 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -432,6 +432,7 @@ static int map_sg_data(struct scsi_cmnd *cmd, sdev_printk(KERN_ERR, cmd->device, "Can't allocate memory " "for indirect table\n"); + scsi_dma_unmap(cmd); return 0; } } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 257c241..809d32d 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1998,6 +1998,8 @@ int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev) if (!shost->can_queue) shost->can_queue = ISCSI_DEF_XMIT_CMDS_MAX; + if (!shost->transportt->eh_timed_out) + shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out; return scsi_add_host(shost, pdev); } EXPORT_SYMBOL_GPL(iscsi_host_add); @@ -2020,7 +2022,6 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size); if (!shost) return NULL; - shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out; if (qdepth > ISCSI_MAX_CMD_PER_LUN || qdepth < 1) { if (qdepth != 0) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index a8f30bd..a730248 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -5258,6 +5258,7 @@ lpfc_send_els_event(struct lpfc_vport *vport, sizeof(struct lpfc_name)); break; default: + kfree(els_data); return; } memcpy(els_data->wwpn, &ndlp->nlp_portname, sizeof(struct lpfc_name)); diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 33a3c13..f4c5722 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1265,13 +1265,6 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags)) msleep(1000); - if (ha->mqenable) { - if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS) - qla_printk(KERN_WARNING, ha, - "Queue delete failed.\n"); - vha->req_ques[0] = ha->req_q_map[0]->id; - } - qla24xx_disable_vp(vha); fc_remove_host(vha->host); @@ -1293,6 +1286,12 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) vha->host_no, vha->vp_idx, vha)); } + if (ha->mqenable) { + if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS) + qla_printk(KERN_WARNING, ha, + "Queue delete failed.\n"); + } + scsi_host_put(vha->host); qla_printk(KERN_INFO, ha, "vport %d deleted\n", id); return 0; diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 023ee77..e0c5bb5 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2135,6 +2135,7 @@ struct qla_msix_entry { /* Work events. */ enum qla_work_type { QLA_EVT_AEN, + QLA_EVT_IDC_ACK, }; @@ -2149,6 +2150,10 @@ struct qla_work_evt { enum fc_host_event_code code; u32 data; } aen; + struct { +#define QLA_IDC_ACK_REGS 7 + uint16_t mb[QLA_IDC_ACK_REGS]; + } idc_ack; } u; }; diff --git a/drivers/scsi/qla2xxx/qla_devtbl.h b/drivers/scsi/qla2xxx/qla_devtbl.h index d78d35e..d6ea69d 100644 --- a/drivers/scsi/qla2xxx/qla_devtbl.h +++ b/drivers/scsi/qla2xxx/qla_devtbl.h @@ -72,7 +72,7 @@ static char *qla2x00_model_name[QLA_MODEL_NAMES*2] = { "QLA2462", "Sun PCI-X 2.0 to 4Gb FC, Dual Channel", /* 0x141 */ "QLE2460", "Sun PCI-Express to 2Gb FC, Single Channel", /* 0x142 */ "QLE2462", "Sun PCI-Express to 4Gb FC, Single Channel", /* 0x143 */ - "QEM2462" "Server I/O Module 4Gb FC, Dual Channel", /* 0x144 */ + "QEM2462", "Server I/O Module 4Gb FC, Dual Channel", /* 0x144 */ "QLE2440", "PCI-Express to 4Gb FC, Single Channel", /* 0x145 */ "QLE2464", "PCI-Express to 4Gb FC, Quad Channel", /* 0x146 */ "QLA2440", "PCI-X 2.0 to 4Gb FC, Single Channel", /* 0x147 */ diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 7abb045..ffff425 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -1402,6 +1402,8 @@ struct access_chip_rsp_84xx { #define MBA_IDC_NOTIFY 0x8101 #define MBA_IDC_TIME_EXT 0x8102 +#define MBC_IDC_ACK 0x101 + struct nvram_81xx { /* NVRAM header. */ uint8_t id[4]; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index a336b4b..6de283f 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -72,6 +72,7 @@ extern int qla2x00_loop_reset(scsi_qla_host_t *); extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int); extern int qla2x00_post_aen_work(struct scsi_qla_host *, enum fc_host_event_code, u32); +extern int qla2x00_post_idc_ack_work(struct scsi_qla_host *, uint16_t *); extern void qla2x00_abort_fcport_cmds(fc_port_t *); extern struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *, @@ -266,6 +267,8 @@ qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *); extern int qla84xx_verify_chip(struct scsi_qla_host *, uint16_t *); +extern int qla81xx_idc_ack(scsi_qla_host_t *, uint16_t *); + /* * Global Function Prototypes in qla_isr.c source file. */ @@ -376,10 +379,8 @@ extern int qla2x00_dfs_remove(scsi_qla_host_t *); /* Globa function prototypes for multi-q */ extern int qla25xx_request_irq(struct rsp_que *); -extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *, - uint8_t); -extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *, - uint8_t); +extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *); +extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *); extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t, uint16_t, uint8_t, uint8_t); extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t, diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index f6368a1..9865017 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1226,9 +1226,8 @@ qla24xx_config_rings(struct scsi_qla_host *vha) icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_18); - icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_22); + icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22); icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23); - ha->rsp_q_map[0]->options = icb->firmware_options_2; WRT_REG_DWORD(®->isp25mq.req_q_in, 0); WRT_REG_DWORD(®->isp25mq.req_q_out, 0); @@ -3493,7 +3492,7 @@ qla25xx_init_queues(struct qla_hw_data *ha) rsp = ha->rsp_q_map[i]; if (rsp) { rsp->options &= ~BIT_0; - ret = qla25xx_init_rsp_que(base_vha, rsp, rsp->options); + ret = qla25xx_init_rsp_que(base_vha, rsp); if (ret != QLA_SUCCESS) DEBUG2_17(printk(KERN_WARNING "%s Rsp que:%d init failed\n", __func__, @@ -3507,7 +3506,7 @@ qla25xx_init_queues(struct qla_hw_data *ha) if (req) { /* Clear outstanding commands array. */ req->options &= ~BIT_0; - ret = qla25xx_init_req_que(base_vha, req, req->options); + ret = qla25xx_init_req_que(base_vha, req); if (ret != QLA_SUCCESS) DEBUG2_17(printk(KERN_WARNING "%s Req que:%d init failed\n", __func__, diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index e28ad81..f250e5b 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -266,6 +266,40 @@ qla2x00_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0) } } +static void +qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr) +{ + static char *event[] = + { "Complete", "Request Notification", "Time Extension" }; + int rval; + struct device_reg_24xx __iomem *reg24 = &vha->hw->iobase->isp24; + uint16_t __iomem *wptr; + uint16_t cnt, timeout, mb[QLA_IDC_ACK_REGS]; + + /* Seed data -- mailbox1 -> mailbox7. */ + wptr = (uint16_t __iomem *)®24->mailbox1; + for (cnt = 0; cnt < QLA_IDC_ACK_REGS; cnt++, wptr++) + mb[cnt] = RD_REG_WORD(wptr); + + DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- " + "%04x %04x %04x %04x %04x %04x %04x.\n", vha->host_no, + event[aen & 0xff], + mb[0], mb[1], mb[2], mb[3], mb[4], mb[5], mb[6])); + + /* Acknowledgement needed? [Notify && non-zero timeout]. */ + timeout = (descr >> 8) & 0xf; + if (aen != MBA_IDC_NOTIFY || !timeout) + return; + + DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- " + "ACK timeout=%d.\n", vha->host_no, event[aen & 0xff], timeout)); + + rval = qla2x00_post_idc_ack_work(vha, mb); + if (rval != QLA_SUCCESS) + qla_printk(KERN_WARNING, vha->hw, + "IDC failed to post ACK.\n"); +} + /** * qla2x00_async_event() - Process aynchronous events. * @ha: SCSI driver HA context @@ -714,21 +748,9 @@ skip_rio: "%04x %04x %04x\n", vha->host_no, mb[1], mb[2], mb[3])); break; case MBA_IDC_COMPLETE: - DEBUG2(printk("scsi(%ld): Inter-Driver Commucation " - "Complete -- %04x %04x %04x\n", vha->host_no, mb[1], mb[2], - mb[3])); - break; case MBA_IDC_NOTIFY: - DEBUG2(printk("scsi(%ld): Inter-Driver Commucation " - "Request Notification -- %04x %04x %04x\n", vha->host_no, - mb[1], mb[2], mb[3])); - /**** Mailbox registers 4 - 7 valid!!! */ - break; case MBA_IDC_TIME_EXT: - DEBUG2(printk("scsi(%ld): Inter-Driver Commucation " - "Time Extension -- %04x %04x %04x\n", vha->host_no, mb[1], - mb[2], mb[3])); - /**** Mailbox registers 4 - 7 valid!!! */ + qla81xx_idc_event(vha, mb[0], mb[1]); break; } @@ -1707,7 +1729,6 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) struct qla_hw_data *ha; struct rsp_que *rsp; struct device_reg_24xx __iomem *reg; - uint16_t msix_disabled_hccr = 0; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -1720,17 +1741,8 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) spin_lock_irq(&ha->hardware_lock); - msix_disabled_hccr = rsp->options; - if (!rsp->id) - msix_disabled_hccr &= __constant_cpu_to_le32(BIT_22); - else - msix_disabled_hccr &= __constant_cpu_to_le32(BIT_6); - qla24xx_process_response_queue(rsp); - if (!msix_disabled_hccr) - WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); - spin_unlock_irq(&ha->hardware_lock); return IRQ_HANDLED; diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index f94ffbb..4c7504c 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3090,8 +3090,7 @@ verify_done: } int -qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, - uint8_t options) +qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req) { int rval; unsigned long flags; @@ -3101,7 +3100,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, struct qla_hw_data *ha = vha->hw; mcp->mb[0] = MBC_INITIALIZE_MULTIQ; - mcp->mb[1] = options; + mcp->mb[1] = req->options; mcp->mb[2] = MSW(LSD(req->dma)); mcp->mb[3] = LSW(LSD(req->dma)); mcp->mb[6] = MSW(MSD(req->dma)); @@ -3128,7 +3127,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, mcp->tov = 60; spin_lock_irqsave(&ha->hardware_lock, flags); - if (!(options & BIT_0)) { + if (!(req->options & BIT_0)) { WRT_REG_DWORD(®->req_q_in, 0); WRT_REG_DWORD(®->req_q_out, 0); } @@ -3142,8 +3141,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, } int -qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, - uint8_t options) +qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) { int rval; unsigned long flags; @@ -3153,7 +3151,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, struct qla_hw_data *ha = vha->hw; mcp->mb[0] = MBC_INITIALIZE_MULTIQ; - mcp->mb[1] = options; + mcp->mb[1] = rsp->options; mcp->mb[2] = MSW(LSD(rsp->dma)); mcp->mb[3] = LSW(LSD(rsp->dma)); mcp->mb[6] = MSW(MSD(rsp->dma)); @@ -3178,7 +3176,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, mcp->tov = 60; spin_lock_irqsave(&ha->hardware_lock, flags); - if (!(options & BIT_0)) { + if (!(rsp->options & BIT_0)) { WRT_REG_DWORD(®->rsp_q_out, 0); WRT_REG_DWORD(®->rsp_q_in, 0); } @@ -3193,3 +3191,29 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, return rval; } +int +qla81xx_idc_ack(scsi_qla_host_t *vha, uint16_t *mb) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); + + mcp->mb[0] = MBC_IDC_ACK; + memcpy(&mcp->mb[1], mb, QLA_IDC_ACK_REGS * sizeof(uint16_t)); + mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; + mcp->in_mb = MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, + vha->host_no, rval, mcp->mb[0])); + } else { + DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); + } + + return rval; +} diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index f53179c4..3f23932 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -396,7 +396,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL); - memset(vha->req_ques, 0, sizeof(vha->req_ques) * QLA_MAX_HOST_QUES); + memset(vha->req_ques, 0, sizeof(vha->req_ques)); vha->req_ques[0] = ha->req_q_map[0]->id; host->can_queue = ha->req_q_map[0]->length + 128; host->this_id = 255; @@ -471,7 +471,7 @@ qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req) if (req) { req->options |= BIT_0; - ret = qla25xx_init_req_que(vha, req, req->options); + ret = qla25xx_init_req_que(vha, req); } if (ret == QLA_SUCCESS) qla25xx_free_req_que(vha, req); @@ -486,7 +486,7 @@ qla25xx_delete_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) if (rsp) { rsp->options |= BIT_0; - ret = qla25xx_init_rsp_que(vha, rsp, rsp->options); + ret = qla25xx_init_rsp_que(vha, rsp); } if (ret == QLA_SUCCESS) qla25xx_free_rsp_que(vha, rsp); @@ -502,7 +502,7 @@ int qla25xx_update_req_que(struct scsi_qla_host *vha, uint8_t que, uint8_t qos) req->options |= BIT_3; req->qos = qos; - ret = qla25xx_init_req_que(vha, req, req->options); + ret = qla25xx_init_req_que(vha, req); if (ret != QLA_SUCCESS) DEBUG2_17(printk(KERN_WARNING "%s failed\n", __func__)); /* restore options bit */ @@ -632,7 +632,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options, req->max_q_depth = ha->req_q_map[0]->max_q_depth; mutex_unlock(&ha->vport_lock); - ret = qla25xx_init_req_que(base_vha, req, options); + ret = qla25xx_init_req_que(base_vha, req); if (ret != QLA_SUCCESS) { qla_printk(KERN_WARNING, ha, "%s failed\n", __func__); mutex_lock(&ha->vport_lock); @@ -710,7 +710,7 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options, if (ret) goto que_failed; - ret = qla25xx_init_rsp_que(base_vha, rsp, options); + ret = qla25xx_init_rsp_que(base_vha, rsp); if (ret != QLA_SUCCESS) { qla_printk(KERN_WARNING, ha, "%s failed\n", __func__); mutex_lock(&ha->vport_lock); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index c11f872..2f5f725 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2522,6 +2522,19 @@ qla2x00_post_aen_work(struct scsi_qla_host *vha, enum fc_host_event_code code, return qla2x00_post_work(vha, e, 1); } +int +qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb) +{ + struct qla_work_evt *e; + + e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK, 1); + if (!e) + return QLA_FUNCTION_FAILED; + + memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t)); + return qla2x00_post_work(vha, e, 1); +} + static void qla2x00_do_work(struct scsi_qla_host *vha) { @@ -2539,6 +2552,9 @@ qla2x00_do_work(struct scsi_qla_host *vha) fc_host_post_event(vha->host, fc_get_event_number(), e->u.aen.code, e->u.aen.data); break; + case QLA_EVT_IDC_ACK: + qla81xx_idc_ack(vha, e->u.idc_ack.mb); + break; } if (e->flags & QLA_EVT_FLAG_FREE) kfree(e); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 9c3b694..2848279 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -684,7 +684,7 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) "end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start, le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size))); - switch (le32_to_cpu(region->code)) { + switch (le32_to_cpu(region->code) & 0xff) { case FLT_REG_FW: ha->flt_region_fw = start; break; diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index cfa4c11..79f7053 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.00-k2" +#define QLA2XXX_VERSION "8.03.00-k3" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 66505bb..8f4de20 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -317,6 +317,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, return sdev; out_device_destroy: + scsi_device_set_state(sdev, SDEV_DEL); transport_destroy_device(&sdev->sdev_gendev); put_device(&sdev->sdev_gendev); out: diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 8f0bd3f..516925d 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1078,7 +1078,7 @@ sg_ioctl(struct inode *inode, struct file *filp, case BLKTRACESETUP: return blk_trace_setup(sdp->device->request_queue, sdp->disk->disk_name, - sdp->device->sdev_gendev.devt, + MKDEV(SCSI_GENERIC_MAJOR, sdp->index), (char *)arg); case BLKTRACESTART: return blk_trace_startstop(sdp->device->request_queue, 1); diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0d934bf..b4b3981 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2083,6 +2083,20 @@ static int serial8250_startup(struct uart_port *port) serial8250_set_mctrl(&up->port, up->port.mctrl); + /* Serial over Lan (SoL) hack: + Intel 8257x Gigabit ethernet chips have a + 16550 emulation, to be used for Serial Over Lan. + Those chips take a longer time than a normal + serial device to signalize that a transmission + data was queued. Due to that, the above test generally + fails. One solution would be to delay the reading of + iir. However, this is not reliable, since the timeout + is variable. So, let's just don't test if we receive + TX irq. This way, we'll never enable UART_BUG_TXEN. + */ + if (up->port.flags & UPF_NO_TXEN_TEST) + goto dont_test_tx_en; + /* * Do a quick test to see if we receive an * interrupt when we enable the TX irq. @@ -2102,6 +2116,7 @@ static int serial8250_startup(struct uart_port *port) up->bugs &= ~UART_BUG_TXEN; } +dont_test_tx_en: spin_unlock_irqrestore(&up->port.lock, flags); /* diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 536d8e5..533f820 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -798,6 +798,21 @@ pci_default_setup(struct serial_private *priv, return setup_port(priv, port, bar, offset, board->reg_shift); } +static int skip_tx_en_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_NO_TXEN_TEST; + printk(KERN_DEBUG "serial8250: skipping TxEn test for device " + "[%04x:%04x] subsystem [%04x:%04x]\n", + priv->dev->vendor, + priv->dev->device, + priv->dev->subsystem_vendor, + priv->dev->subsystem_device); + + return pci_default_setup(priv, board, port, idx); +} + /* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B @@ -864,6 +879,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .init = pci_inteli960ni_init, .setup = pci_default_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_8257X_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573L_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573E_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, /* * ITE */ diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 89362d7..8f58f7f 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -877,6 +877,10 @@ static int atmel_startup(struct uart_port *port) } } + /* Save current CSR for comparison in atmel_tasklet_func() */ + atmel_port->irq_status_prev = UART_GET_CSR(port); + atmel_port->irq_status = atmel_port->irq_status_prev; + /* * Finally, enable the serial port */ diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 92187e2..ac79cbe 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -84,6 +84,8 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) brd->pci_dev = pdev; if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM) brd->maxports = 4; + else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8) + brd->maxports = 8; else brd->maxports = 2; @@ -212,6 +214,7 @@ static struct pci_device_id jsm_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 }, { 0, } }; MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c index 49698ca..f5ed972 100644 --- a/drivers/spi/spi_gpio.c +++ b/drivers/spi/spi_gpio.c @@ -114,7 +114,7 @@ static inline void setmosi(const struct spi_device *spi, int is_on) static inline int getmiso(const struct spi_device *spi) { - return gpio_get_value(SPI_MISO_GPIO); + return !!gpio_get_value(SPI_MISO_GPIO); } #undef pdata diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 6b996db..604bd1e 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -27,6 +27,7 @@ menuconfig ANDROID_RAM_CONSOLE_ERROR_CORRECTION bool "Android RAM Console Enable error correction" default n depends on ANDROID_RAM_CONSOLE + depends on !ANDROID_RAM_CONSOLE_EARLY_INIT select REED_SOLOMON select REED_SOLOMON_ENC8 select REED_SOLOMON_DEC8 diff --git a/drivers/staging/android/ram_console.c b/drivers/staging/android/ram_console.c index bf00685..643ac5c 100644 --- a/drivers/staging/android/ram_console.c +++ b/drivers/staging/android/ram_console.c @@ -224,9 +224,23 @@ static int __init ram_console_init(struct ram_console_buffer *buffer, ram_console_buffer_size = buffer_size - sizeof(struct ram_console_buffer); + if (ram_console_buffer_size > buffer_size) { + pr_err("ram_console: buffer %p, invalid size %d, datasize %d\n", + buffer, buffer_size, ram_console_buffer_size); + return 0; + } + #ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION ram_console_buffer_size -= (DIV_ROUND_UP(ram_console_buffer_size, ECC_BLOCK_SIZE) + 1) * ECC_SIZE; + + if (ram_console_buffer_size > buffer_size) { + pr_err("ram_console: buffer %p, invalid size %d, " + "non-ecc datasize %d\n", + buffer, buffer_size, ram_console_buffer_size); + return 0; + } + ram_console_par_buffer = buffer->data + ram_console_buffer_size; diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c index 903270c..33daff0 100644 --- a/drivers/staging/android/timed_gpio.c +++ b/drivers/staging/android/timed_gpio.c @@ -50,7 +50,7 @@ static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *att if (hrtimer_active(&gpio_data->timer)) { ktime_t r = hrtimer_get_remaining(&gpio_data->timer); struct timeval t = ktime_to_timeval(r); - remaining = t.tv_sec * 1000 + t.tv_usec; + remaining = t.tv_sec * 1000 + t.tv_usec / 1000; } else remaining = 0; diff --git a/drivers/staging/at76_usb/Kconfig b/drivers/staging/at76_usb/Kconfig index 4c0e55e..8606f96 100644 --- a/drivers/staging/at76_usb/Kconfig +++ b/drivers/staging/at76_usb/Kconfig @@ -1,6 +1,6 @@ config USB_ATMEL tristate "Atmel at76c503/at76c505/at76c505a USB cards" - depends on MAC80211 && WLAN_80211 && USB + depends on WLAN_80211 && USB default N select FW_LOADER ---help--- diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c index 185533e..c8e4d31 100644 --- a/drivers/staging/at76_usb/at76_usb.c +++ b/drivers/staging/at76_usb/at76_usb.c @@ -6,7 +6,6 @@ * Copyright (c) 2004 Nick Jones * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com> * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org> - * Copyright (c) 2007 Kalle Valo <kalle.valo@iki.fi> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -17,13 +16,6 @@ * Atmel AT76C503A/505/505A. * * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed - * - * TODO for the mac80211 port: - * o adhoc support - * o RTS/CTS support - * o Power Save Mode support - * o support for short/long preambles - * o export variables through debugfs/sysfs */ #include <linux/init.h> @@ -44,7 +36,7 @@ #include <net/ieee80211_radiotap.h> #include <linux/firmware.h> #include <linux/leds.h> -#include <net/mac80211.h> +#include <net/ieee80211.h> #include "at76_usb.h" @@ -84,43 +76,31 @@ #define DBG_WE_EVENTS 0x08000000 /* dump wireless events */ #define DBG_FW 0x10000000 /* firmware download */ #define DBG_DFU 0x20000000 /* device firmware upgrade */ -#define DBG_CMD 0x40000000 -#define DBG_MAC80211 0x80000000 #define DBG_DEFAULTS 0 /* Use our own dbg macro */ #define at76_dbg(bits, format, arg...) \ -do { \ - if (at76_debug & (bits)) \ - printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \ -} while (0) - -#define at76_dbg_dump(bits, buf, len, format, arg...) \ -do { \ - if (at76_debug & (bits)) { \ + do { \ + if (at76_debug & (bits)) \ printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \ - print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \ - } \ -} while (0) + } while (0) static int at76_debug = DBG_DEFAULTS; -#define FIRMWARE_IS_WPA(ver) ((ver.major == 1) && (ver.minor == 103)) - /* Protect against concurrent firmware loading and parsing */ static struct mutex fw_mutex; static struct fwentry firmwares[] = { - [0] = { "" }, - [BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" }, - [BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" }, - [BOARD_503] = { "atmel_at76c503-rfmd.bin" }, - [BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" }, - [BOARD_505] = { "atmel_at76c505-rfmd.bin" }, - [BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" }, - [BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" }, - [BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" }, + [0] = {""}, + [BOARD_503_ISL3861] = {"atmel_at76c503-i3861.bin"}, + [BOARD_503_ISL3863] = {"atmel_at76c503-i3863.bin"}, + [BOARD_503] = {"atmel_at76c503-rfmd.bin"}, + [BOARD_503_ACC] = {"atmel_at76c503-rfmd-acc.bin"}, + [BOARD_505] = {"atmel_at76c505-rfmd.bin"}, + [BOARD_505_2958] = {"atmel_at76c505-rfmd2958.bin"}, + [BOARD_505A] = {"atmel_at76c505a-rfmd2958.bin"}, + [BOARD_505AMX] = {"atmel_at76c505amx-rfmd.bin"}, }; #define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) @@ -130,133 +110,135 @@ static struct usb_device_id dev_table[] = { * at76c503-i3861 */ /* Generic AT76C503/3861 device */ - { USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Linksys WUSB11 v2.1/v2.6 */ - { USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Netgear MA101 rev. A */ - { USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Tekram U300C / Allnet ALL0193 */ - { USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* HP HN210W J7801A */ - { USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Sitecom/Z-Com/Zyxel M4Y-750 */ - { USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Dynalink/Askey WLL013 (intersil) */ - { USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* EZ connect 11Mpbs Wireless USB Adapter SMC2662W v1 */ - { USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* BenQ AWL300 */ - { USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Addtron AWU-120, Compex WLU11 */ - { USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Intel AP310 AnyPoint II USB */ - { USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Dynalink L11U */ - { USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Arescom WL-210, FCC id 07J-GL2411USB */ - { USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* I-O DATA WN-B11/USB */ - { USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* BT Voyager 1010 */ - { USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* * at76c503-i3863 */ /* Generic AT76C503/3863 device */ - { USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) }, + {USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863)}, /* Samsung SWL-2100U */ - { USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) }, + {USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863)}, /* * at76c503-rfmd */ /* Generic AT76C503/RFMD device */ - { USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503)}, /* Dynalink/Askey WLL013 (rfmd) */ - { USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503)}, /* Linksys WUSB11 v2.6 */ - { USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503)}, /* Network Everywhere NWU11B */ - { USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503)}, /* Netgear MA101 rev. B */ - { USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503)}, /* D-Link DWL-120 rev. E */ - { USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503)}, /* Actiontec 802UAT1, HWU01150-01UK */ - { USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503)}, /* AirVast W-Buddie WN210 */ - { USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503)}, /* Dick Smith Electronics XH1153 802.11b USB adapter */ - { USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503)}, /* CNet CNUSB611 */ - { USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503)}, /* FiberLine FL-WL200U */ - { USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503)}, /* BenQ AWL400 USB stick */ - { USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503)}, /* 3Com 3CRSHEW696 */ - { USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503)}, /* Siemens Santis ADSL WLAN USB adapter WLL 013 */ - { USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503)}, /* Belkin F5D6050, version 2 */ - { USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503)}, /* iBlitzz, BWU613 (not *B or *SB) */ - { USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503)}, /* Gigabyte GN-WLBM101 */ - { USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503)}, /* Planex GW-US11S */ - { USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503)}, /* Internal WLAN adapter in h5[4,5]xx series iPAQs */ - { USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503)}, /* Corega Wireless LAN USB-11 mini */ - { USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503)}, /* Corega Wireless LAN USB-11 mini2 */ - { USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503)}, /* Uniden PCW100 */ - { USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503)}, /* * at76c503-rfmd-acc */ /* SMC2664W */ - { USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) }, + {USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC)}, /* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */ - { USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) }, + {USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC)}, /* * at76c505-rfmd */ /* Generic AT76C505/RFMD */ - { USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) }, + {USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505)}, /* * at76c505-rfmd2958 */ /* Generic AT76C505/RFMD, OvisLink WL-1130USB */ - { USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)}, /* Fiberline FL-WL240U */ - { USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958)}, /* CNet CNUSB-611G */ - { USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958)}, /* Linksys WUSB11 v2.8 */ - { USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958)}, /* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */ - { USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958)}, /* Corega WLAN USB Stick 11 */ - { USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)}, /* Microstar MSI Box MS6978 */ - { USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958)}, /* * at76c505a-rfmd2958 */ /* Generic AT76C505A device */ - { USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) }, + {USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A)}, /* Generic AT76C505AS device */ - { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) }, + {USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A)}, /* Siemens Gigaset USB WLAN Adapter 11 */ - { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) }, + {USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A)}, + /* OQO Model 01+ Internal Wi-Fi */ + {USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A)}, /* * at76c505amx-rfmd */ /* Generic AT76C505AMX device */ - { USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) }, - { } + {USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX)}, + {} }; MODULE_DEVICE_TABLE(usb, dev_table); @@ -264,8 +246,26 @@ MODULE_DEVICE_TABLE(usb, dev_table); /* Supported rates of this hardware, bit 7 marks basic rates */ static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 }; +/* Frequency of each channel in MHz */ +static const long channel_frequency[] = { + 2412, 2417, 2422, 2427, 2432, 2437, 2442, + 2447, 2452, 2457, 2462, 2467, 2472, 2484 +}; + +#define NUM_CHANNELS ARRAY_SIZE(channel_frequency) + static const char *const preambles[] = { "long", "short", "auto" }; +static const char *const mac_states[] = { + [MAC_INIT] = "INIT", + [MAC_SCANNING] = "SCANNING", + [MAC_AUTH] = "AUTH", + [MAC_ASSOC] = "ASSOC", + [MAC_JOINING] = "JOINING", + [MAC_CONNECTED] = "CONNECTED", + [MAC_OWN_IBSS] = "OWN_IBSS" +}; + /* Firmware download */ /* DFU states */ #define STATE_IDLE 0x00 @@ -300,30 +300,17 @@ struct dfu_status { static inline int at76_is_intersil(enum board_type board) { - if (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863) - return 1; - return 0; + return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863); } static inline int at76_is_503rfmd(enum board_type board) { - if (board == BOARD_503 || board == BOARD_503_ACC) - return 1; - return 0; -} - -static inline int at76_is_505(enum board_type board) -{ - if (board == BOARD_505 || board == BOARD_505_2958) - return 1; - return 0; + return (board == BOARD_503 || board == BOARD_503_ACC); } static inline int at76_is_505a(enum board_type board) { - if (board == BOARD_505A || board == BOARD_505AMX) - return 1; - return 0; + return (board == BOARD_505A || board == BOARD_505AMX); } /* Load a block of the first (internal) part of the firmware */ @@ -504,6 +491,41 @@ exit: return ret; } +/* Report that the scan results are ready */ +static inline void at76_iwevent_scan_complete(struct net_device *netdev) +{ + union iwreq_data wrqu; + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(netdev, SIOCGIWSCAN, &wrqu, NULL); + at76_dbg(DBG_WE_EVENTS, "%s: SIOCGIWSCAN sent", netdev->name); +} + +static inline void at76_iwevent_bss_connect(struct net_device *netdev, + u8 *bssid) +{ + union iwreq_data wrqu; + wrqu.data.length = 0; + wrqu.data.flags = 0; + memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL); + at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name, + __func__); +} + +static inline void at76_iwevent_bss_disconnect(struct net_device *netdev) +{ + union iwreq_data wrqu; + wrqu.data.length = 0; + wrqu.data.flags = 0; + memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL); + at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name, + __func__); +} + #define HEX2STR_BUFFERS 4 #define HEX2STR_MAX_LEN 64 #define BIN2HEX(x) ((x) < 10 ? '0' + (x) : (x) + 'A' - 10) @@ -575,6 +597,37 @@ static void at76_ledtrig_tx_activity(void) mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4); } +/* Check if the given ssid is hidden */ +static inline int at76_is_hidden_ssid(u8 *ssid, int length) +{ + static const u8 zeros[32]; + + if (length == 0) + return 1; + + if (length == 1 && ssid[0] == ' ') + return 1; + + return (memcmp(ssid, zeros, length) == 0); +} + +static inline void at76_free_bss_list(struct at76_priv *priv) +{ + struct list_head *next, *ptr; + unsigned long flags; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + priv->curr_bss = NULL; + + list_for_each_safe(ptr, next, &priv->bss_list) { + list_del(ptr); + kfree(list_entry(ptr, struct bss_info, list)); + } + + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); +} + static int at76_remap(struct usb_device *udev) { int ret; @@ -598,7 +651,7 @@ static int at76_get_op_mode(struct usb_device *udev) return -ENOMEM; ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33, USB_TYPE_VENDOR | USB_DIR_IN | - USB_RECIP_INTERFACE, 0x01, 0, &op_mode, 1, + USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1, USB_CTRL_GET_TIMEOUT); saved = *op_mode; kfree(op_mode); @@ -676,7 +729,7 @@ exit: kfree(hwcfg); if (ret < 0) printk(KERN_ERR "%s: cannot get HW Config (error %d)\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -685,15 +738,15 @@ static struct reg_domain const *at76_get_reg_domain(u16 code) { int i; static struct reg_domain const fd_tab[] = { - { 0x10, "FCC (USA)", 0x7ff }, /* ch 1-11 */ - { 0x20, "IC (Canada)", 0x7ff }, /* ch 1-11 */ - { 0x30, "ETSI (most of Europe)", 0x1fff }, /* ch 1-13 */ - { 0x31, "Spain", 0x600 }, /* ch 10-11 */ - { 0x32, "France", 0x1e00 }, /* ch 10-13 */ - { 0x40, "MKK (Japan)", 0x2000 }, /* ch 14 */ - { 0x41, "MKK1 (Japan)", 0x3fff }, /* ch 1-14 */ - { 0x50, "Israel", 0x3fc }, /* ch 3-9 */ - { 0x00, "<unknown>", 0xffffffff } /* ch 1-32 */ + {0x10, "FCC (USA)", 0x7ff}, /* ch 1-11 */ + {0x20, "IC (Canada)", 0x7ff}, /* ch 1-11 */ + {0x30, "ETSI (most of Europe)", 0x1fff}, /* ch 1-13 */ + {0x31, "Spain", 0x600}, /* ch 10-11 */ + {0x32, "France", 0x1e00}, /* ch 10-13 */ + {0x40, "MKK (Japan)", 0x2000}, /* ch 14 */ + {0x41, "MKK1 (Japan)", 0x3fff}, /* ch 1-14 */ + {0x50, "Israel", 0x3fc}, /* ch 3-9 */ + {0x00, "<unknown>", 0xffffffff} /* ch 1-32 */ }; /* Last entry is fallback for unknown domain code */ @@ -731,7 +784,7 @@ static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd) ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22, USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_INTERFACE, cmd, 0, stat_buf, - sizeof(stat_buf), USB_CTRL_GET_TIMEOUT); + 40, USB_CTRL_GET_TIMEOUT); if (ret >= 0) ret = stat_buf[5]; kfree(stat_buf); @@ -739,24 +792,6 @@ static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd) return ret; } -#define MAKE_CMD_CASE(c) case (c): return #c - -static const char *at76_get_cmd_string(u8 cmd_status) -{ - switch (cmd_status) { - MAKE_CMD_CASE(CMD_SET_MIB); - MAKE_CMD_CASE(CMD_GET_MIB); - MAKE_CMD_CASE(CMD_SCAN); - MAKE_CMD_CASE(CMD_JOIN); - MAKE_CMD_CASE(CMD_START_IBSS); - MAKE_CMD_CASE(CMD_RADIO_ON); - MAKE_CMD_CASE(CMD_RADIO_OFF); - MAKE_CMD_CASE(CMD_STARTUP); - } - - return "UNKNOWN"; -} - static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf, int buf_size) { @@ -772,10 +807,6 @@ static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf, cmd_buf->size = cpu_to_le16(buf_size); memcpy(cmd_buf->data, buf, buf_size); - at76_dbg_dump(DBG_CMD, cmd_buf, sizeof(struct at76_command) + buf_size, - "issuing command %s (0x%02x)", - at76_get_cmd_string(cmd), cmd); - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e, USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, 0, 0, cmd_buf, @@ -813,13 +844,13 @@ static int at76_wait_completion(struct at76_priv *priv, int cmd) status = at76_get_cmd_status(priv->udev, cmd); if (status < 0) { printk(KERN_ERR "%s: at76_get_cmd_status failed: %d\n", - wiphy_name(priv->hw->wiphy), status); + priv->netdev->name, status); break; } at76_dbg(DBG_WAIT_COMPLETE, "%s: Waiting on cmd %d, status = %d (%s)", - wiphy_name(priv->hw->wiphy), cmd, status, + priv->netdev->name, cmd, status, at76_get_cmd_status_string(status)); if (status != CMD_STATUS_IN_PROGRESS @@ -830,7 +861,7 @@ static int at76_wait_completion(struct at76_priv *priv, int cmd) if (time_after(jiffies, timeout)) { printk(KERN_ERR "%s: completion timeout for command %d\n", - wiphy_name(priv->hw->wiphy), cmd); + priv->netdev->name, cmd); status = -ETIMEDOUT; break; } @@ -853,7 +884,7 @@ static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf) if (ret != CMD_STATUS_COMPLETE) { printk(KERN_INFO "%s: set_mib: at76_wait_completion failed " - "with %d\n", wiphy_name(priv->hw->wiphy), ret); + "with %d\n", priv->netdev->name, ret); ret = -EIO; } @@ -874,7 +905,7 @@ static int at76_set_radio(struct at76_priv *priv, int enable) ret = at76_set_card_command(priv->udev, cmd, NULL, 0); if (ret < 0) printk(KERN_ERR "%s: at76_set_card_command(%d) failed: %d\n", - wiphy_name(priv->hw->wiphy), cmd, ret); + priv->netdev->name, cmd, ret); else ret = 1; @@ -895,7 +926,44 @@ static int at76_set_pm_mode(struct at76_priv *priv) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (pm_mode) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); + + return ret; +} + +/* Set the association id for power save mode */ +static int at76_set_associd(struct at76_priv *priv, u16 id) +{ + int ret = 0; + + priv->mib_buf.type = MIB_MAC_MGMT; + priv->mib_buf.size = 2; + priv->mib_buf.index = offsetof(struct mib_mac_mgmt, station_id); + priv->mib_buf.data.word = cpu_to_le16(id); + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + printk(KERN_ERR "%s: set_mib (associd) failed: %d\n", + priv->netdev->name, ret); + + return ret; +} + +/* Set the listen interval for power save mode */ +static int at76_set_listen_interval(struct at76_priv *priv, u16 interval) +{ + int ret = 0; + + priv->mib_buf.type = MIB_MAC; + priv->mib_buf.size = 2; + priv->mib_buf.index = offsetof(struct mib_mac, listen_interval); + priv->mib_buf.data.word = cpu_to_le16(interval); + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + printk(KERN_ERR + "%s: set_mib (listen_interval) failed: %d\n", + priv->netdev->name, ret); return ret; } @@ -912,7 +980,7 @@ static int at76_set_preamble(struct at76_priv *priv, u8 type) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (preamble) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -929,7 +997,7 @@ static int at76_set_frag(struct at76_priv *priv, u16 size) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (frag threshold) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -946,7 +1014,7 @@ static int at76_set_rts(struct at76_priv *priv, u16 size) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (rts) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -963,41 +1031,24 @@ static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (autorate fallback) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } -static int at76_set_tkip_bssid(struct at76_priv *priv, const void *addr) +static int at76_add_mac_address(struct at76_priv *priv, void *addr) { int ret = 0; - priv->mib_buf.type = MIB_MAC_ENCRYPTION; + priv->mib_buf.type = MIB_MAC_ADDR; priv->mib_buf.size = ETH_ALEN; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, tkip_bssid); + priv->mib_buf.index = offsetof(struct mib_mac_addr, mac_addr); memcpy(priv->mib_buf.data.addr, addr, ETH_ALEN); ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) - printk(KERN_ERR "%s: set_mib (MAC_ENCRYPTION, tkip_bssid) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - - return ret; -} - -static int at76_reset_rsc(struct at76_priv *priv) -{ - int ret = 0; - - priv->mib_buf.type = MIB_MAC_ENCRYPTION; - priv->mib_buf.size = 4 * 8; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, key_rsc); - memset(priv->mib_buf.data.data, 0 , priv->mib_buf.size); - - ret = at76_set_mib(priv, &priv->mib_buf); - if (ret < 0) - printk(KERN_ERR "%s: set_mib (MAC_ENCRYPTION, key_rsc) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + printk(KERN_ERR "%s: set_mib (MAC_ADDR, mac_addr) failed: %d\n", + priv->netdev->name, ret); return ret; } @@ -1016,16 +1067,16 @@ static void at76_dump_mib_mac_addr(struct at76_priv *priv) sizeof(struct mib_mac_addr)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC_ADDR) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %s res 0x%x 0x%x", - wiphy_name(priv->hw->wiphy), + priv->netdev->name, mac2str(m->mac_addr), m->res[0], m->res[1]); for (i = 0; i < ARRAY_SIZE(m->group_addr); i++) at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %s, " - "status %d", wiphy_name(priv->hw->wiphy), i, + "status %d", priv->netdev->name, i, mac2str(m->group_addr[i]), m->group_addr_status[i]); exit: kfree(m); @@ -1045,13 +1096,13 @@ static void at76_dump_mib_mac_wep(struct at76_priv *priv) sizeof(struct mib_mac_wep)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC_WEP) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u " "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u " - "encr_level %u key %d", wiphy_name(priv->hw->wiphy), + "encr_level %u key %d", priv->netdev->name, m->privacy_invoked, m->wep_default_key_id, m->wep_key_mapping_len, m->exclude_unencrypted, le32_to_cpu(m->wep_icv_error_count), @@ -1063,55 +1114,12 @@ static void at76_dump_mib_mac_wep(struct at76_priv *priv) for (i = 0; i < WEP_KEYS; i++) at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %s", - wiphy_name(priv->hw->wiphy), i, + priv->netdev->name, i, hex2str(m->wep_default_keyvalue[i], key_len)); exit: kfree(m); } -static void at76_dump_mib_mac_encryption(struct at76_priv *priv) -{ - int i; - int ret; - /*int key_len;*/ - struct mib_mac_encryption *m; - - m = kmalloc(sizeof(struct mib_mac_encryption), GFP_KERNEL); - if (!m) - return; - - ret = at76_get_mib(priv->udev, MIB_MAC_ENCRYPTION, m, - sizeof(struct mib_mac_encryption)); - if (ret < 0) { - dev_err(&priv->udev->dev, - "%s: at76_get_mib (MAC_ENCRYPTION) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - goto exit; - } - - at76_dbg(DBG_MIB, - "%s: MIB MAC_ENCRYPTION: tkip_bssid %s priv_invoked %u " - "ciph_key_id %u grp_key_id %u excl_unencr %u " - "ckip_key_perm %u wep_icv_err %u wep_excluded %u", - wiphy_name(priv->hw->wiphy), mac2str(m->tkip_bssid), - m->privacy_invoked, m->cipher_default_key_id, - m->cipher_default_group_key_id, m->exclude_unencrypted, - m->ckip_key_permutation, - le32_to_cpu(m->wep_icv_error_count), - le32_to_cpu(m->wep_excluded_count)); - - /*key_len = (m->encryption_level == 1) ? - WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;*/ - - for (i = 0; i < CIPHER_KEYS; i++) - at76_dbg(DBG_MIB, "%s: MIB MAC_ENCRYPTION: key %d: %s", - wiphy_name(priv->hw->wiphy), i, - hex2str(m->cipher_default_keyvalue[i], - CIPHER_KEY_LEN)); -exit: - kfree(m); -} - static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) { int ret; @@ -1125,7 +1133,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) sizeof(struct mib_mac_mgmt)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC_MGMT) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } @@ -1136,7 +1144,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) "pm_mode %d ibss_change %d res %d " "multi_domain_capability_implemented %d " "international_roaming %d country_string %.3s", - wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period), + priv->netdev->name, le16_to_cpu(m->beacon_period), le16_to_cpu(m->CFP_max_duration), le16_to_cpu(m->medium_occupancy_limit), le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window), @@ -1161,7 +1169,7 @@ static void at76_dump_mib_mac(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } @@ -1171,8 +1179,7 @@ static void at76_dump_mib_mac(struct at76_priv *priv) "scan_type %d scan_channel %d probe_delay %u " "min_channel_time %d max_channel_time %d listen_int %d " "desired_ssid %s desired_bssid %s desired_bsstype %d", - wiphy_name(priv->hw->wiphy), - le32_to_cpu(m->max_tx_msdu_lifetime), + priv->netdev->name, le32_to_cpu(m->max_tx_msdu_lifetime), le32_to_cpu(m->max_rx_lifetime), le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold), le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax), @@ -1198,7 +1205,7 @@ static void at76_dump_mib_phy(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (PHY) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } @@ -1207,7 +1214,7 @@ static void at76_dump_mib_phy(struct at76_priv *priv) "mpdu_max_length %d cca_mode_supported %d operation_rate_set " "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d " "phy_type %d current_reg_domain %d", - wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold), + priv->netdev->name, le32_to_cpu(m->ed_threshold), le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time), le16_to_cpu(m->preamble_length), le16_to_cpu(m->plcp_header_length), @@ -1231,14 +1238,13 @@ static void at76_dump_mib_local(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (LOCAL) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d " "txautorate_fallback %d ssid_size %d promiscuous_mode %d " - "preamble_type %d", wiphy_name(priv->hw->wiphy), - m->beacon_enable, + "preamble_type %d", priv->netdev->name, m->beacon_enable, m->txautorate_fallback, m->ssid_size, m->promiscuous_mode, m->preamble_type); exit: @@ -1257,21 +1263,118 @@ static void at76_dump_mib_mdomain(struct at76_priv *priv) sizeof(struct mib_mdomain)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MDOMAIN) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %s", - wiphy_name(priv->hw->wiphy), + priv->netdev->name, hex2str(m->channel_list, sizeof(m->channel_list))); at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %s", - wiphy_name(priv->hw->wiphy), + priv->netdev->name, hex2str(m->tx_powerlevel, sizeof(m->tx_powerlevel))); exit: kfree(m); } +static int at76_get_current_bssid(struct at76_priv *priv) +{ + int ret = 0; + struct mib_mac_mgmt *mac_mgmt = + kmalloc(sizeof(struct mib_mac_mgmt), GFP_KERNEL); + + if (!mac_mgmt) { + ret = -ENOMEM; + goto exit; + } + + ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, mac_mgmt, + sizeof(struct mib_mac_mgmt)); + if (ret < 0) { + printk(KERN_ERR "%s: at76_get_mib failed: %d\n", + priv->netdev->name, ret); + goto error; + } + memcpy(priv->bssid, mac_mgmt->current_bssid, ETH_ALEN); + printk(KERN_INFO "%s: using BSSID %s\n", priv->netdev->name, + mac2str(priv->bssid)); +error: + kfree(mac_mgmt); +exit: + return ret; +} + +static int at76_get_current_channel(struct at76_priv *priv) +{ + int ret = 0; + struct mib_phy *phy = kmalloc(sizeof(struct mib_phy), GFP_KERNEL); + + if (!phy) { + ret = -ENOMEM; + goto exit; + } + ret = at76_get_mib(priv->udev, MIB_PHY, phy, sizeof(struct mib_phy)); + if (ret < 0) { + printk(KERN_ERR "%s: at76_get_mib(MIB_PHY) failed: %d\n", + priv->netdev->name, ret); + goto error; + } + priv->channel = phy->channel_id; +error: + kfree(phy); +exit: + return ret; +} + +/** + * at76_start_scan - start a scan + * + * @use_essid - use the configured ESSID in non passive mode + */ +static int at76_start_scan(struct at76_priv *priv, int use_essid) +{ + struct at76_req_scan scan; + + memset(&scan, 0, sizeof(struct at76_req_scan)); + memset(scan.bssid, 0xff, ETH_ALEN); + + if (use_essid) { + memcpy(scan.essid, priv->essid, IW_ESSID_MAX_SIZE); + scan.essid_size = priv->essid_size; + } else + scan.essid_size = 0; + + /* jal: why should we start at a certain channel? we do scan the whole + range allowed by reg domain. */ + scan.channel = priv->channel; + + /* atmelwlandriver differs between scan type 0 and 1 (active/passive) + For ad-hoc mode, it uses type 0 only. */ + scan.scan_type = priv->scan_mode; + + /* INFO: For probe_delay, not multiplying by 1024 as this will be + slightly less than min_channel_time + (per spec: probe delay < min. channel time) */ + scan.min_channel_time = cpu_to_le16(priv->scan_min_time); + scan.max_channel_time = cpu_to_le16(priv->scan_max_time); + scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000); + scan.international_scan = 0; + + /* other values are set to 0 for type 0 */ + + at76_dbg(DBG_PROGRESS, "%s: start_scan (use_essid = %d, intl = %d, " + "channel = %d, probe_delay = %d, scan_min_time = %d, " + "scan_max_time = %d)", + priv->netdev->name, use_essid, + scan.international_scan, scan.channel, + le16_to_cpu(scan.probe_delay), + le16_to_cpu(scan.min_channel_time), + le16_to_cpu(scan.max_channel_time)); + + return at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); +} + /* Enable monitor mode */ static int at76_start_monitor(struct at76_priv *priv) { @@ -1292,6 +1395,86 @@ static int at76_start_monitor(struct at76_priv *priv) return ret; } +static int at76_start_ibss(struct at76_priv *priv) +{ + struct at76_req_ibss bss; + int ret; + + WARN_ON(priv->mac_state != MAC_OWN_IBSS); + if (priv->mac_state != MAC_OWN_IBSS) + return -EBUSY; + + memset(&bss, 0, sizeof(struct at76_req_ibss)); + memset(bss.bssid, 0xff, ETH_ALEN); + memcpy(bss.essid, priv->essid, IW_ESSID_MAX_SIZE); + bss.essid_size = priv->essid_size; + bss.bss_type = ADHOC_MODE; + bss.channel = priv->channel; + + ret = at76_set_card_command(priv->udev, CMD_START_IBSS, &bss, + sizeof(struct at76_req_ibss)); + if (ret < 0) { + printk(KERN_ERR "%s: start_ibss failed: %d\n", + priv->netdev->name, ret); + return ret; + } + + ret = at76_wait_completion(priv, CMD_START_IBSS); + if (ret != CMD_STATUS_COMPLETE) { + printk(KERN_ERR "%s: start_ibss failed to complete, %d\n", + priv->netdev->name, ret); + return ret; + } + + ret = at76_get_current_bssid(priv); + if (ret < 0) + return ret; + + ret = at76_get_current_channel(priv); + if (ret < 0) + return ret; + + /* not sure what this is good for ??? */ + priv->mib_buf.type = MIB_MAC_MGMT; + priv->mib_buf.size = 1; + priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change); + priv->mib_buf.data.byte = 0; + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) { + printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n", + priv->netdev->name, ret); + return ret; + } + + netif_carrier_on(priv->netdev); + netif_start_queue(priv->netdev); + return 0; +} + +/* Request card to join BSS in managed or ad-hoc mode */ +static int at76_join_bss(struct at76_priv *priv, struct bss_info *ptr) +{ + struct at76_req_join join; + + BUG_ON(!ptr); + + memset(&join, 0, sizeof(struct at76_req_join)); + memcpy(join.bssid, ptr->bssid, ETH_ALEN); + memcpy(join.essid, ptr->ssid, ptr->ssid_len); + join.essid_size = ptr->ssid_len; + join.bss_type = (priv->iw_mode == IW_MODE_ADHOC ? 1 : 2); + join.channel = ptr->channel; + join.timeout = cpu_to_le16(2000); + + at76_dbg(DBG_PROGRESS, + "%s join addr %s ssid %s type %d ch %d timeout %d", + priv->netdev->name, mac2str(join.bssid), join.essid, + join.bss_type, join.channel, le16_to_cpu(join.timeout)); + return at76_set_card_command(priv->udev, CMD_JOIN, &join, + sizeof(struct at76_req_join)); +} + /* Calculate padding from txbuf->wlength (which excludes the USB TX header), likely to compensate a flaw in the AT76C503A USB part ... */ static inline int at76_calc_padding(int wlen) @@ -1310,6 +1493,14 @@ static inline int at76_calc_padding(int wlen) return 0; } +/* We are doing a lot of things here in an interrupt. Need + a bh handler (Watching TV with a TV card is probably + a good test: if you see flickers, we are doing too much. + Currently I do see flickers... even with our tasklet :-( ) + Maybe because the bttv driver and usb-uhci use the same interrupt +*/ +/* Or maybe because our BH handler is preempting bttv's BH handler.. BHs don't + * solve everything.. (alex) */ static void at76_rx_callback(struct urb *urb) { struct at76_priv *priv = urb->context; @@ -1319,6 +1510,1758 @@ static void at76_rx_callback(struct urb *urb) return; } +static void at76_tx_callback(struct urb *urb) +{ + struct at76_priv *priv = urb->context; + struct net_device_stats *stats = &priv->stats; + unsigned long flags; + struct at76_tx_buffer *mgmt_buf; + int ret; + + switch (urb->status) { + case 0: + stats->tx_packets++; + break; + case -ENOENT: + case -ECONNRESET: + /* urb has been unlinked */ + return; + default: + at76_dbg(DBG_URB, "%s - nonzero tx status received: %d", + __func__, urb->status); + stats->tx_errors++; + break; + } + + spin_lock_irqsave(&priv->mgmt_spinlock, flags); + mgmt_buf = priv->next_mgmt_bulk; + priv->next_mgmt_bulk = NULL; + spin_unlock_irqrestore(&priv->mgmt_spinlock, flags); + + if (!mgmt_buf) { + netif_wake_queue(priv->netdev); + return; + } + + /* we don't copy the padding bytes, but add them + to the length */ + memcpy(priv->bulk_out_buffer, mgmt_buf, + le16_to_cpu(mgmt_buf->wlength) + AT76_TX_HDRLEN); + usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, + priv->bulk_out_buffer, + le16_to_cpu(mgmt_buf->wlength) + mgmt_buf->padding + + AT76_TX_HDRLEN, at76_tx_callback, priv); + ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); + if (ret) + printk(KERN_ERR "%s: error in tx submit urb: %d\n", + priv->netdev->name, ret); + + kfree(mgmt_buf); +} + +/* Send a management frame on bulk-out. txbuf->wlength must be set */ +static int at76_tx_mgmt(struct at76_priv *priv, struct at76_tx_buffer *txbuf) +{ + unsigned long flags; + int ret; + int urb_status; + void *oldbuf = NULL; + + netif_carrier_off(priv->netdev); /* stop netdev watchdog */ + netif_stop_queue(priv->netdev); /* stop tx data packets */ + + spin_lock_irqsave(&priv->mgmt_spinlock, flags); + + urb_status = priv->tx_urb->status; + if (urb_status == -EINPROGRESS) { + /* cannot transmit now, put in the queue */ + oldbuf = priv->next_mgmt_bulk; + priv->next_mgmt_bulk = txbuf; + } + spin_unlock_irqrestore(&priv->mgmt_spinlock, flags); + + if (oldbuf) { + /* a data/mgmt tx is already pending in the URB - + if this is no error in some situations we must + implement a queue or silently modify the old msg */ + printk(KERN_ERR "%s: removed pending mgmt buffer %s\n", + priv->netdev->name, hex2str(oldbuf, 64)); + kfree(oldbuf); + return 0; + } + + txbuf->tx_rate = TX_RATE_1MBIT; + txbuf->padding = at76_calc_padding(le16_to_cpu(txbuf->wlength)); + memset(txbuf->reserved, 0, sizeof(txbuf->reserved)); + + if (priv->next_mgmt_bulk) + printk(KERN_ERR "%s: URB status %d, but mgmt is pending\n", + priv->netdev->name, urb_status); + + at76_dbg(DBG_TX_MGMT, + "%s: tx mgmt: wlen %d tx_rate %d pad %d %s", + priv->netdev->name, le16_to_cpu(txbuf->wlength), + txbuf->tx_rate, txbuf->padding, + hex2str(txbuf->packet, le16_to_cpu(txbuf->wlength))); + + /* txbuf was not consumed above -> send mgmt msg immediately */ + memcpy(priv->bulk_out_buffer, txbuf, + le16_to_cpu(txbuf->wlength) + AT76_TX_HDRLEN); + usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, + priv->bulk_out_buffer, + le16_to_cpu(txbuf->wlength) + txbuf->padding + + AT76_TX_HDRLEN, at76_tx_callback, priv); + ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); + if (ret) + printk(KERN_ERR "%s: error in tx submit urb: %d\n", + priv->netdev->name, ret); + + kfree(txbuf); + + return ret; +} + +/* Go to the next information element */ +static inline void next_ie(struct ieee80211_info_element **ie) +{ + *ie = (struct ieee80211_info_element *)(&(*ie)->data[(*ie)->len]); +} + +/* Challenge is the challenge string (in TLV format) + we got with seq_nr 2 for shared secret authentication only and + send in seq_nr 3 WEP encrypted to prove we have the correct WEP key; + otherwise it is NULL */ +static int at76_auth_req(struct at76_priv *priv, struct bss_info *bss, + int seq_nr, struct ieee80211_info_element *challenge) +{ + struct at76_tx_buffer *tx_buffer; + struct ieee80211_hdr_3addr *mgmt; + struct ieee80211_auth *req; + int buf_len = (seq_nr != 3 ? AUTH_FRAME_SIZE : + AUTH_FRAME_SIZE + 1 + 1 + challenge->len); + + BUG_ON(!bss); + BUG_ON(seq_nr == 3 && !challenge); + tx_buffer = kmalloc(buf_len + MAX_PADDING_SIZE, GFP_ATOMIC); + if (!tx_buffer) + return -ENOMEM; + + req = (struct ieee80211_auth *)tx_buffer->packet; + mgmt = &req->header; + + /* make wireless header */ + /* first auth msg is not encrypted, only the second (seq_nr == 3) */ + mgmt->frame_ctl = + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH | + (seq_nr == 3 ? IEEE80211_FCTL_PROTECTED : 0)); + + mgmt->duration_id = cpu_to_le16(0x8000); + memcpy(mgmt->addr1, bss->bssid, ETH_ALEN); + memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN); + memcpy(mgmt->addr3, bss->bssid, ETH_ALEN); + mgmt->seq_ctl = cpu_to_le16(0); + + req->algorithm = cpu_to_le16(priv->auth_mode); + req->transaction = cpu_to_le16(seq_nr); + req->status = cpu_to_le16(0); + + if (seq_nr == 3) + memcpy(req->info_element, challenge, 1 + 1 + challenge->len); + + /* init. at76_priv tx header */ + tx_buffer->wlength = cpu_to_le16(buf_len - AT76_TX_HDRLEN); + at76_dbg(DBG_TX_MGMT, "%s: AuthReq bssid %s alg %d seq_nr %d", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(req->algorithm), le16_to_cpu(req->transaction)); + if (seq_nr == 3) + at76_dbg(DBG_TX_MGMT, "%s: AuthReq challenge: %s ...", + priv->netdev->name, hex2str(req->info_element, 18)); + + /* either send immediately (if no data tx is pending + or put it in pending list */ + return at76_tx_mgmt(priv, tx_buffer); +} + +static int at76_assoc_req(struct at76_priv *priv, struct bss_info *bss) +{ + struct at76_tx_buffer *tx_buffer; + struct ieee80211_hdr_3addr *mgmt; + struct ieee80211_assoc_request *req; + struct ieee80211_info_element *ie; + char *essid; + int essid_len; + u16 capa; + + BUG_ON(!bss); + + tx_buffer = kmalloc(ASSOCREQ_MAX_SIZE + MAX_PADDING_SIZE, GFP_ATOMIC); + if (!tx_buffer) + return -ENOMEM; + + req = (struct ieee80211_assoc_request *)tx_buffer->packet; + mgmt = &req->header; + ie = req->info_element; + + /* make wireless header */ + mgmt->frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_ASSOC_REQ); + + mgmt->duration_id = cpu_to_le16(0x8000); + memcpy(mgmt->addr1, bss->bssid, ETH_ALEN); + memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN); + memcpy(mgmt->addr3, bss->bssid, ETH_ALEN); + mgmt->seq_ctl = cpu_to_le16(0); + + /* we must set the Privacy bit in the capabilities to assure an + Agere-based AP with optional WEP transmits encrypted frames + to us. AP only set the Privacy bit in their capabilities + if WEP is mandatory in the BSS! */ + capa = bss->capa; + if (priv->wep_enabled) + capa |= WLAN_CAPABILITY_PRIVACY; + if (priv->preamble_type != PREAMBLE_TYPE_LONG) + capa |= WLAN_CAPABILITY_SHORT_PREAMBLE; + req->capability = cpu_to_le16(capa); + + req->listen_interval = cpu_to_le16(2 * bss->beacon_interval); + + /* write TLV data elements */ + + ie->id = MFIE_TYPE_SSID; + ie->len = bss->ssid_len; + memcpy(ie->data, bss->ssid, bss->ssid_len); + next_ie(&ie); + + ie->id = MFIE_TYPE_RATES; + ie->len = sizeof(hw_rates); + memcpy(ie->data, hw_rates, sizeof(hw_rates)); + next_ie(&ie); /* ie points behind the supp_rates field */ + + /* init. at76_priv tx header */ + tx_buffer->wlength = cpu_to_le16((u8 *)ie - (u8 *)mgmt); + + ie = req->info_element; + essid = ie->data; + essid_len = min_t(int, IW_ESSID_MAX_SIZE, ie->len); + + next_ie(&ie); /* points to IE of rates now */ + at76_dbg(DBG_TX_MGMT, + "%s: AssocReq bssid %s capa 0x%04x ssid %.*s rates %s", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(req->capability), essid_len, essid, + hex2str(ie->data, ie->len)); + + /* either send immediately (if no data tx is pending + or put it in pending list */ + return at76_tx_mgmt(priv, tx_buffer); +} + +/* We got to check the bss_list for old entries */ +static void at76_bss_list_timeout(unsigned long par) +{ + struct at76_priv *priv = (struct at76_priv *)par; + unsigned long flags; + struct list_head *lptr, *nptr; + struct bss_info *ptr; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + list_for_each_safe(lptr, nptr, &priv->bss_list) { + + ptr = list_entry(lptr, struct bss_info, list); + + if (ptr != priv->curr_bss + && time_after(jiffies, ptr->last_rx + BSS_LIST_TIMEOUT)) { + at76_dbg(DBG_BSS_TABLE_RM, + "%s: bss_list: removing old BSS %s ch %d", + priv->netdev->name, mac2str(ptr->bssid), + ptr->channel); + list_del(&ptr->list); + kfree(ptr); + } + } + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); + /* restart the timer */ + mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT); +} + +static inline void at76_set_mac_state(struct at76_priv *priv, + enum mac_state mac_state) +{ + at76_dbg(DBG_MAC_STATE, "%s state: %s", priv->netdev->name, + mac_states[mac_state]); + priv->mac_state = mac_state; +} + +static void at76_dump_bss_table(struct at76_priv *priv) +{ + struct bss_info *ptr; + unsigned long flags; + struct list_head *lptr; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + at76_dbg(DBG_BSS_TABLE, "%s BSS table (curr=%p):", priv->netdev->name, + priv->curr_bss); + + list_for_each(lptr, &priv->bss_list) { + ptr = list_entry(lptr, struct bss_info, list); + at76_dbg(DBG_BSS_TABLE, "0x%p: bssid %s channel %d ssid %.*s " + "(%s) capa 0x%04x rates %s rssi %d link %d noise %d", + ptr, mac2str(ptr->bssid), ptr->channel, ptr->ssid_len, + ptr->ssid, hex2str(ptr->ssid, ptr->ssid_len), + ptr->capa, hex2str(ptr->rates, ptr->rates_len), + ptr->rssi, ptr->link_qual, ptr->noise_level); + } + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); +} + +/* Called upon successful association to mark interface as connected */ +static void at76_work_assoc_done(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_assoc_done); + + mutex_lock(&priv->mtx); + + WARN_ON(priv->mac_state != MAC_ASSOC); + WARN_ON(!priv->curr_bss); + if (priv->mac_state != MAC_ASSOC || !priv->curr_bss) + goto exit; + + if (priv->iw_mode == IW_MODE_INFRA) { + if (priv->pm_mode != AT76_PM_OFF) { + /* calculate the listen interval in units of + beacon intervals of the curr_bss */ + u32 pm_period_beacon = (priv->pm_period >> 10) / + priv->curr_bss->beacon_interval; + + pm_period_beacon = max(pm_period_beacon, 2u); + pm_period_beacon = min(pm_period_beacon, 0xffffu); + + at76_dbg(DBG_PM, + "%s: pm_mode %d assoc id 0x%x listen int %d", + priv->netdev->name, priv->pm_mode, + priv->assoc_id, pm_period_beacon); + + at76_set_associd(priv, priv->assoc_id); + at76_set_listen_interval(priv, (u16)pm_period_beacon); + } + schedule_delayed_work(&priv->dwork_beacon, BEACON_TIMEOUT); + } + at76_set_pm_mode(priv); + + netif_carrier_on(priv->netdev); + netif_wake_queue(priv->netdev); + at76_set_mac_state(priv, MAC_CONNECTED); + at76_iwevent_bss_connect(priv->netdev, priv->curr_bss->bssid); + at76_dbg(DBG_PROGRESS, "%s: connected to BSSID %s", + priv->netdev->name, mac2str(priv->curr_bss->bssid)); + +exit: + mutex_unlock(&priv->mtx); +} + +/* We only store the new mac address in netdev struct, + it gets set when the netdev is opened. */ +static int at76_set_mac_address(struct net_device *netdev, void *addr) +{ + struct sockaddr *mac = addr; + memcpy(netdev->dev_addr, mac->sa_data, ETH_ALEN); + return 1; +} + +static struct net_device_stats *at76_get_stats(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + return &priv->stats; +} + +static struct iw_statistics *at76_get_wireless_stats(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "RETURN qual %d level %d noise %d updated %d", + priv->wstats.qual.qual, priv->wstats.qual.level, + priv->wstats.qual.noise, priv->wstats.qual.updated); + + return &priv->wstats; +} + +static void at76_set_multicast(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + int promisc; + + promisc = ((netdev->flags & IFF_PROMISC) != 0); + if (promisc != priv->promisc) { + /* This gets called in interrupt, must reschedule */ + priv->promisc = promisc; + schedule_work(&priv->work_set_promisc); + } +} + +/* Stop all network activity, flush all pending tasks */ +static void at76_quiesce(struct at76_priv *priv) +{ + unsigned long flags; + + netif_stop_queue(priv->netdev); + netif_carrier_off(priv->netdev); + + at76_set_mac_state(priv, MAC_INIT); + + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + cancel_delayed_work(&priv->dwork_restart); + + spin_lock_irqsave(&priv->mgmt_spinlock, flags); + kfree(priv->next_mgmt_bulk); + priv->next_mgmt_bulk = NULL; + spin_unlock_irqrestore(&priv->mgmt_spinlock, flags); +} + +/******************************************************************************* + * at76_priv implementations of iw_handler functions: + */ +static int at76_iw_handler_commit(struct net_device *netdev, + struct iw_request_info *info, + void *null, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s %s: restarting the device", netdev->name, + __func__); + + if (priv->mac_state != MAC_INIT) + at76_quiesce(priv); + + /* Wait half second before the restart to process subsequent + * requests from the same iwconfig in a single restart */ + schedule_delayed_work(&priv->dwork_restart, HZ / 2); + + return 0; +} + +static int at76_iw_handler_get_name(struct net_device *netdev, + struct iw_request_info *info, + char *name, char *extra) +{ + strcpy(name, "IEEE 802.11b"); + at76_dbg(DBG_IOCTL, "%s: SIOCGIWNAME - name %s", netdev->name, name); + return 0; +} + +static int at76_iw_handler_set_freq(struct net_device *netdev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int chan = -1; + int ret = -EIWCOMMIT; + at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - freq.m %d freq.e %d", + netdev->name, freq->m, freq->e); + + if ((freq->e == 0) && (freq->m <= 1000)) + /* Setting by channel number */ + chan = freq->m; + else { + /* Setting by frequency - search the table */ + int mult = 1; + int i; + + for (i = 0; i < (6 - freq->e); i++) + mult *= 10; + + for (i = 0; i < NUM_CHANNELS; i++) { + if (freq->m == (channel_frequency[i] * mult)) + chan = i + 1; + } + } + + if (chan < 1 || !priv->domain) + /* non-positive channels are invalid + * we need a domain info to set the channel + * either that or an invalid frequency was + * provided by the user */ + ret = -EINVAL; + else if (!(priv->domain->channel_map & (1 << (chan - 1)))) { + printk(KERN_INFO "%s: channel %d not allowed for domain %s\n", + priv->netdev->name, chan, priv->domain->name); + ret = -EINVAL; + } + + if (ret == -EIWCOMMIT) { + priv->channel = chan; + at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - ch %d", netdev->name, + chan); + } + + return ret; +} + +static int at76_iw_handler_get_freq(struct net_device *netdev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + freq->m = priv->channel; + freq->e = 0; + + if (priv->channel) + at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - freq %ld x 10e%d", + netdev->name, channel_frequency[priv->channel - 1], 6); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - ch %d", netdev->name, + priv->channel); + + return 0; +} + +static int at76_iw_handler_set_mode(struct net_device *netdev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWMODE - %d", netdev->name, *mode); + + if ((*mode != IW_MODE_ADHOC) && (*mode != IW_MODE_INFRA) && + (*mode != IW_MODE_MONITOR)) + return -EINVAL; + + priv->iw_mode = *mode; + if (priv->iw_mode != IW_MODE_INFRA) + priv->pm_mode = AT76_PM_OFF; + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_mode(struct net_device *netdev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + *mode = priv->iw_mode; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWMODE - %d", netdev->name, *mode); + + return 0; +} + +static int at76_iw_handler_get_range(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + /* inspired by atmel.c */ + struct at76_priv *priv = netdev_priv(netdev); + struct iw_range *range = (struct iw_range *)extra; + int i; + + data->length = sizeof(struct iw_range); + memset(range, 0, sizeof(struct iw_range)); + + /* TODO: range->throughput = xxxxxx; */ + + range->min_nwid = 0x0000; + range->max_nwid = 0x0000; + + /* this driver doesn't maintain sensitivity information */ + range->sensitivity = 0; + + range->max_qual.qual = 100; + range->max_qual.level = 100; + range->max_qual.noise = 0; + range->max_qual.updated = IW_QUAL_NOISE_INVALID; + + range->avg_qual.qual = 50; + range->avg_qual.level = 50; + range->avg_qual.noise = 0; + range->avg_qual.updated = IW_QUAL_NOISE_INVALID; + + range->bitrate[0] = 1000000; + range->bitrate[1] = 2000000; + range->bitrate[2] = 5500000; + range->bitrate[3] = 11000000; + range->num_bitrates = 4; + + range->min_rts = 0; + range->max_rts = MAX_RTS_THRESHOLD; + + range->min_frag = MIN_FRAG_THRESHOLD; + range->max_frag = MAX_FRAG_THRESHOLD; + + range->pmp_flags = IW_POWER_PERIOD; + range->pmt_flags = IW_POWER_ON; + range->pm_capa = IW_POWER_PERIOD | IW_POWER_ALL_R; + + range->encoding_size[0] = WEP_SMALL_KEY_LEN; + range->encoding_size[1] = WEP_LARGE_KEY_LEN; + range->num_encoding_sizes = 2; + range->max_encoding_tokens = WEP_KEYS; + + /* both WL-240U and Linksys WUSB11 v2.6 specify 15 dBm as output power + - take this for all (ignore antenna gains) */ + range->txpower[0] = 15; + range->num_txpower = 1; + range->txpower_capa = IW_TXPOW_DBM; + + range->we_version_source = WIRELESS_EXT; + range->we_version_compiled = WIRELESS_EXT; + + /* same as the values used in atmel.c */ + range->retry_capa = IW_RETRY_LIMIT; + range->retry_flags = IW_RETRY_LIMIT; + range->r_time_flags = 0; + range->min_retry = 1; + range->max_retry = 255; + + range->num_channels = NUM_CHANNELS; + range->num_frequency = 0; + + for (i = 0; i < NUM_CHANNELS; i++) { + /* test if channel map bit is raised */ + if (priv->domain->channel_map & (0x1 << i)) { + range->num_frequency += 1; + + range->freq[i].i = i + 1; + range->freq[i].m = channel_frequency[i] * 100000; + range->freq[i].e = 1; /* freq * 10^1 */ + } + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRANGE", netdev->name); + + return 0; +} + +static int at76_iw_handler_set_spy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWSPY - number of addresses %d", + netdev->name, data->length); + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_set_spy(priv->netdev, info, (union iwreq_data *)data, + extra); + spin_unlock_bh(&priv->spy_spinlock); + + return ret; +} + +static int at76_iw_handler_get_spy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_get_spy(priv->netdev, info, + (union iwreq_data *)data, extra); + spin_unlock_bh(&priv->spy_spinlock); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWSPY - number of addresses %d", + netdev->name, data->length); + + return ret; +} + +static int at76_iw_handler_set_thrspy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWTHRSPY - number of addresses %d)", + netdev->name, data->length); + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_set_thrspy(netdev, info, (union iwreq_data *)data, + extra); + spin_unlock_bh(&priv->spy_spinlock); + + return ret; +} + +static int at76_iw_handler_get_thrspy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret; + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_get_thrspy(netdev, info, (union iwreq_data *)data, + extra); + spin_unlock_bh(&priv->spy_spinlock); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWTHRSPY - number of addresses %d)", + netdev->name, data->length); + + return ret; +} + +static int at76_iw_handler_set_wap(struct net_device *netdev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWAP - wap/bssid %s", netdev->name, + mac2str(ap_addr->sa_data)); + + /* if the incoming address == ff:ff:ff:ff:ff:ff, the user has + chosen any or auto AP preference */ + if (is_broadcast_ether_addr(ap_addr->sa_data) + || is_zero_ether_addr(ap_addr->sa_data)) + priv->wanted_bssid_valid = 0; + else { + /* user wants to set a preferred AP address */ + priv->wanted_bssid_valid = 1; + memcpy(priv->wanted_bssid, ap_addr->sa_data, ETH_ALEN); + } + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_wap(struct net_device *netdev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + ap_addr->sa_family = ARPHRD_ETHER; + memcpy(ap_addr->sa_data, priv->bssid, ETH_ALEN); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWAP - wap/bssid %s", netdev->name, + mac2str(ap_addr->sa_data)); + + return 0; +} + +static int at76_iw_handler_set_scan(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWSCAN", netdev->name); + + if (mutex_lock_interruptible(&priv->mtx)) + return -EINTR; + + if (!netif_running(netdev)) { + ret = -ENETDOWN; + goto exit; + } + + /* jal: we don't allow "iwlist ethX scan" while we are + in monitor mode */ + if (priv->iw_mode == IW_MODE_MONITOR) { + ret = -EBUSY; + goto exit; + } + + /* Discard old scan results */ + if ((jiffies - priv->last_scan) > (20 * HZ)) + priv->scan_state = SCAN_IDLE; + priv->last_scan = jiffies; + + /* Initiate a scan command */ + if (priv->scan_state == SCAN_IN_PROGRESS) { + ret = -EBUSY; + goto exit; + } + + priv->scan_state = SCAN_IN_PROGRESS; + + at76_quiesce(priv); + + /* Try to do passive or active scan if WE asks as. */ + if (wrqu->data.length + && wrqu->data.length == sizeof(struct iw_scan_req)) { + struct iw_scan_req *req = (struct iw_scan_req *)extra; + + if (req->scan_type == IW_SCAN_TYPE_PASSIVE) + priv->scan_mode = SCAN_TYPE_PASSIVE; + else if (req->scan_type == IW_SCAN_TYPE_ACTIVE) + priv->scan_mode = SCAN_TYPE_ACTIVE; + + /* Sanity check values? */ + if (req->min_channel_time > 0) + priv->scan_min_time = req->min_channel_time; + + if (req->max_channel_time > 0) + priv->scan_max_time = req->max_channel_time; + } + + /* change to scanning state */ + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + +exit: + mutex_unlock(&priv->mtx); + return ret; +} + +static int at76_iw_handler_get_scan(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + unsigned long flags; + struct list_head *lptr, *nptr; + struct bss_info *curr_bss; + struct iw_event *iwe = kmalloc(sizeof(struct iw_event), GFP_KERNEL); + char *curr_val, *curr_pos = extra; + int i; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWSCAN", netdev->name); + + if (!iwe) + return -ENOMEM; + + if (priv->scan_state != SCAN_COMPLETED) { + /* scan not yet finished */ + kfree(iwe); + return -EAGAIN; + } + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + list_for_each_safe(lptr, nptr, &priv->bss_list) { + curr_bss = list_entry(lptr, struct bss_info, list); + + iwe->cmd = SIOCGIWAP; + iwe->u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe->u.ap_addr.sa_data, curr_bss->bssid, 6); + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_ADDR_LEN); + + iwe->u.data.length = curr_bss->ssid_len; + iwe->cmd = SIOCGIWESSID; + iwe->u.data.flags = 1; + + curr_pos = iwe_stream_add_point(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + curr_bss->ssid); + + iwe->cmd = SIOCGIWMODE; + iwe->u.mode = (curr_bss->capa & WLAN_CAPABILITY_IBSS) ? + IW_MODE_ADHOC : + (curr_bss->capa & WLAN_CAPABILITY_ESS) ? + IW_MODE_MASTER : IW_MODE_AUTO; + /* IW_MODE_AUTO = 0 which I thought is + * the most logical value to return in this case */ + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_UINT_LEN); + + iwe->cmd = SIOCGIWFREQ; + iwe->u.freq.m = curr_bss->channel; + iwe->u.freq.e = 0; + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_FREQ_LEN); + + iwe->cmd = SIOCGIWENCODE; + if (curr_bss->capa & WLAN_CAPABILITY_PRIVACY) + iwe->u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe->u.data.flags = IW_ENCODE_DISABLED; + + iwe->u.data.length = 0; + curr_pos = iwe_stream_add_point(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + NULL); + + /* Add quality statistics */ + iwe->cmd = IWEVQUAL; + iwe->u.qual.noise = 0; + iwe->u.qual.updated = + IW_QUAL_NOISE_INVALID | IW_QUAL_LEVEL_UPDATED; + iwe->u.qual.level = (curr_bss->rssi * 100 / 42); + if (iwe->u.qual.level > 100) + iwe->u.qual.level = 100; + if (at76_is_intersil(priv->board_type)) + iwe->u.qual.qual = curr_bss->link_qual; + else { + iwe->u.qual.qual = 0; + iwe->u.qual.updated |= IW_QUAL_QUAL_INVALID; + } + /* Add new value to event */ + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_QUAL_LEN); + + /* Rate: stuffing multiple values in a single event requires + * a bit more of magic - Jean II */ + curr_val = curr_pos + IW_EV_LCP_LEN; + + iwe->cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe->u.bitrate.fixed = 0; + iwe->u.bitrate.disabled = 0; + /* Max 8 values */ + for (i = 0; i < curr_bss->rates_len; i++) { + /* Bit rate given in 500 kb/s units (+ 0x80) */ + iwe->u.bitrate.value = + ((curr_bss->rates[i] & 0x7f) * 500000); + /* Add new value to event */ + curr_val = iwe_stream_add_value(info, curr_pos, + curr_val, + extra + + IW_SCAN_MAX_DATA, iwe, + IW_EV_PARAM_LEN); + } + + /* Check if we added any event */ + if ((curr_val - curr_pos) > IW_EV_LCP_LEN) + curr_pos = curr_val; + + /* more information may be sent back using IWECUSTOM */ + + } + + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); + + data->length = (curr_pos - extra); + data->flags = 0; + + kfree(iwe); + return 0; +} + +static int at76_iw_handler_set_essid(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWESSID - %s", netdev->name, extra); + + if (data->flags) { + memcpy(priv->essid, extra, data->length); + priv->essid_size = data->length; + } else + priv->essid_size = 0; /* Use any SSID */ + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_essid(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + if (priv->essid_size) { + /* not the ANY ssid in priv->essid */ + data->flags = 1; + data->length = priv->essid_size; + memcpy(extra, priv->essid, data->length); + } else { + /* the ANY ssid was specified */ + if (priv->mac_state == MAC_CONNECTED && priv->curr_bss) { + /* report the SSID we have found */ + data->flags = 1; + data->length = priv->curr_bss->ssid_len; + memcpy(extra, priv->curr_bss->ssid, data->length); + } else { + /* report ANY back */ + data->flags = 0; + data->length = 0; + } + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWESSID - %.*s", netdev->name, + data->length, extra); + + return 0; +} + +static int at76_iw_handler_set_rate(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *bitrate, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWRATE - %d", netdev->name, + bitrate->value); + + switch (bitrate->value) { + case -1: + priv->txrate = TX_RATE_AUTO; + break; /* auto rate */ + case 1000000: + priv->txrate = TX_RATE_1MBIT; + break; + case 2000000: + priv->txrate = TX_RATE_2MBIT; + break; + case 5500000: + priv->txrate = TX_RATE_5_5MBIT; + break; + case 11000000: + priv->txrate = TX_RATE_11MBIT; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int at76_iw_handler_get_rate(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *bitrate, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + switch (priv->txrate) { + /* return max rate if RATE_AUTO */ + case TX_RATE_AUTO: + bitrate->value = 11000000; + break; + case TX_RATE_1MBIT: + bitrate->value = 1000000; + break; + case TX_RATE_2MBIT: + bitrate->value = 2000000; + break; + case TX_RATE_5_5MBIT: + bitrate->value = 5500000; + break; + case TX_RATE_11MBIT: + bitrate->value = 11000000; + break; + default: + ret = -EINVAL; + } + + bitrate->fixed = (priv->txrate != TX_RATE_AUTO); + bitrate->disabled = 0; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRATE - %d", netdev->name, + bitrate->value); + + return ret; +} + +static int at76_iw_handler_set_rts(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + int rthr = rts->value; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWRTS - value %d disabled %s", + netdev->name, rts->value, (rts->disabled) ? "true" : "false"); + + if (rts->disabled) + rthr = MAX_RTS_THRESHOLD; + + if ((rthr < 0) || (rthr > MAX_RTS_THRESHOLD)) + ret = -EINVAL; + else + priv->rts_threshold = rthr; + + return ret; +} + +static int at76_iw_handler_get_rts(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + rts->value = priv->rts_threshold; + rts->disabled = (rts->value >= MAX_RTS_THRESHOLD); + rts->fixed = 1; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRTS - value %d disabled %s", + netdev->name, rts->value, (rts->disabled) ? "true" : "false"); + + return 0; +} + +static int at76_iw_handler_set_frag(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *frag, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + int fthr = frag->value; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWFRAG - value %d, disabled %s", + netdev->name, frag->value, + (frag->disabled) ? "true" : "false"); + + if (frag->disabled) + fthr = MAX_FRAG_THRESHOLD; + + if ((fthr < MIN_FRAG_THRESHOLD) || (fthr > MAX_FRAG_THRESHOLD)) + ret = -EINVAL; + else + priv->frag_threshold = fthr & ~0x1; /* get an even value */ + + return ret; +} + +static int at76_iw_handler_get_frag(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *frag, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + frag->value = priv->frag_threshold; + frag->disabled = (frag->value >= MAX_FRAG_THRESHOLD); + frag->fixed = 1; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWFRAG - value %d, disabled %s", + netdev->name, frag->value, + (frag->disabled) ? "true" : "false"); + + return 0; +} + +static int at76_iw_handler_get_txpow(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *power, char *extra) +{ + power->value = 15; + power->fixed = 1; /* No power control */ + power->disabled = 0; + power->flags = IW_TXPOW_DBM; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWTXPOW - txpow %d dBm", netdev->name, + power->value); + + return 0; +} + +/* jal: short retry is handled by the firmware (at least 0.90.x), + while long retry is not (?) */ +static int at76_iw_handler_set_retry(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *retry, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWRETRY disabled %d flags 0x%x val %d", + netdev->name, retry->disabled, retry->flags, retry->value); + + if (!retry->disabled && (retry->flags & IW_RETRY_LIMIT)) { + if ((retry->flags & IW_RETRY_MIN) || + !(retry->flags & IW_RETRY_MAX)) + priv->short_retry_limit = retry->value; + else + ret = -EINVAL; + } else + ret = -EINVAL; + + return ret; +} + +/* Adapted (ripped) from atmel.c */ +static int at76_iw_handler_get_retry(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *retry, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRETRY", netdev->name); + + retry->disabled = 0; /* Can't be disabled */ + retry->flags = IW_RETRY_LIMIT; + retry->value = priv->short_retry_limit; + + return 0; +} + +static int at76_iw_handler_set_encode(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *encoding, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int index = (encoding->flags & IW_ENCODE_INDEX) - 1; + int len = encoding->length; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWENCODE - enc.flags %08x " + "pointer %p len %d", netdev->name, encoding->flags, + encoding->pointer, encoding->length); + at76_dbg(DBG_IOCTL, + "%s: SIOCSIWENCODE - old wepstate: enabled %s key_id %d " + "auth_mode %s", netdev->name, + (priv->wep_enabled) ? "true" : "false", priv->wep_key_id, + (priv->auth_mode == + WLAN_AUTH_SHARED_KEY) ? "restricted" : "open"); + + /* take the old default key if index is invalid */ + if ((index < 0) || (index >= WEP_KEYS)) + index = priv->wep_key_id; + + if (len > 0) { + if (len > WEP_LARGE_KEY_LEN) + len = WEP_LARGE_KEY_LEN; + + memset(priv->wep_keys[index], 0, WEP_KEY_LEN); + memcpy(priv->wep_keys[index], extra, len); + priv->wep_keys_len[index] = (len <= WEP_SMALL_KEY_LEN) ? + WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN; + priv->wep_enabled = 1; + } + + priv->wep_key_id = index; + priv->wep_enabled = ((encoding->flags & IW_ENCODE_DISABLED) == 0); + + if (encoding->flags & IW_ENCODE_RESTRICTED) + priv->auth_mode = WLAN_AUTH_SHARED_KEY; + if (encoding->flags & IW_ENCODE_OPEN) + priv->auth_mode = WLAN_AUTH_OPEN; + + at76_dbg(DBG_IOCTL, + "%s: SIOCSIWENCODE - new wepstate: enabled %s key_id %d " + "key_len %d auth_mode %s", netdev->name, + (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1, + priv->wep_keys_len[priv->wep_key_id], + (priv->auth_mode == + WLAN_AUTH_SHARED_KEY) ? "restricted" : "open"); + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_encode(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *encoding, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int index = (encoding->flags & IW_ENCODE_INDEX) - 1; + + if ((index < 0) || (index >= WEP_KEYS)) + index = priv->wep_key_id; + + encoding->flags = + (priv->auth_mode == WLAN_AUTH_SHARED_KEY) ? + IW_ENCODE_RESTRICTED : IW_ENCODE_OPEN; + + if (!priv->wep_enabled) + encoding->flags |= IW_ENCODE_DISABLED; + + if (encoding->pointer) { + encoding->length = priv->wep_keys_len[index]; + + memcpy(extra, priv->wep_keys[index], priv->wep_keys_len[index]); + + encoding->flags |= (index + 1); + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWENCODE - enc.flags %08x " + "pointer %p len %d", netdev->name, encoding->flags, + encoding->pointer, encoding->length); + at76_dbg(DBG_IOCTL, + "%s: SIOCGIWENCODE - wepstate: enabled %s key_id %d " + "key_len %d auth_mode %s", netdev->name, + (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1, + priv->wep_keys_len[priv->wep_key_id], + (priv->auth_mode == + WLAN_AUTH_SHARED_KEY) ? "restricted" : "open"); + + return 0; +} + +static int at76_iw_handler_set_power(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *prq, char *extra) +{ + int err = -EIWCOMMIT; + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, + "%s: SIOCSIWPOWER - disabled %s flags 0x%x value 0x%x", + netdev->name, (prq->disabled) ? "true" : "false", prq->flags, + prq->value); + + if (prq->disabled) + priv->pm_mode = AT76_PM_OFF; + else { + switch (prq->flags & IW_POWER_MODE) { + case IW_POWER_ALL_R: + case IW_POWER_ON: + break; + default: + err = -EINVAL; + goto exit; + } + if (prq->flags & IW_POWER_PERIOD) + priv->pm_period = prq->value; + + if (prq->flags & IW_POWER_TIMEOUT) { + err = -EINVAL; + goto exit; + } + priv->pm_mode = AT76_PM_ON; + } +exit: + return err; +} + +static int at76_iw_handler_get_power(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *power, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + power->disabled = (priv->pm_mode == AT76_PM_OFF); + if (!power->disabled) { + power->flags = IW_POWER_PERIOD | IW_POWER_ALL_R; + power->value = priv->pm_period; + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWPOWER - %s flags 0x%x value 0x%x", + netdev->name, power->disabled ? "disabled" : "enabled", + power->flags, power->value); + + return 0; +} + +/******************************************************************************* + * Private IOCTLS + */ +static int at76_iw_set_short_preamble(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int val = *((int *)name); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_SHORT_PREAMBLE, %d", + netdev->name, val); + + if (val < PREAMBLE_TYPE_LONG || val > PREAMBLE_TYPE_AUTO) + ret = -EINVAL; + else + priv->preamble_type = val; + + return ret; +} + +static int at76_iw_get_short_preamble(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + snprintf(wrqu->name, sizeof(wrqu->name), "%s (%d)", + preambles[priv->preamble_type], priv->preamble_type); + return 0; +} + +static int at76_iw_set_debug(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + char *ptr; + u32 val; + + if (data->length > 0) { + val = simple_strtol(extra, &ptr, 0); + + if (ptr == extra) + val = DBG_DEFAULTS; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG input %d: %s -> 0x%x", + netdev->name, data->length, extra, val); + } else + val = DBG_DEFAULTS; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG, old 0x%x, new 0x%x", + netdev->name, at76_debug, val); + + /* jal: some more output to pin down lockups */ + at76_dbg(DBG_IOCTL, "%s: netif running %d queue_stopped %d " + "carrier_ok %d", netdev->name, netif_running(netdev), + netif_queue_stopped(netdev), netif_carrier_ok(netdev)); + + at76_debug = val; + + return 0; +} + +static int at76_iw_get_debug(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + snprintf(wrqu->name, sizeof(wrqu->name), "0x%08x", at76_debug); + return 0; +} + +static int at76_iw_set_powersave_mode(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int val = *((int *)name); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_POWERSAVE_MODE, %d (%s)", + netdev->name, val, + val == AT76_PM_OFF ? "active" : val == AT76_PM_ON ? "save" : + val == AT76_PM_SMART ? "smart save" : "<invalid>"); + if (val < AT76_PM_OFF || val > AT76_PM_SMART) + ret = -EINVAL; + else + priv->pm_mode = val; + + return ret; +} + +static int at76_iw_get_powersave_mode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int *param = (int *)extra; + + param[0] = priv->pm_mode; + return 0; +} + +static int at76_iw_set_scan_times(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int mint = *((int *)name); + int maxt = *((int *)name + 1); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_TIMES - min %d max %d", + netdev->name, mint, maxt); + if (mint <= 0 || maxt <= 0 || mint > maxt) + ret = -EINVAL; + else { + priv->scan_min_time = mint; + priv->scan_max_time = maxt; + } + + return ret; +} + +static int at76_iw_get_scan_times(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int *param = (int *)extra; + + param[0] = priv->scan_min_time; + param[1] = priv->scan_max_time; + return 0; +} + +static int at76_iw_set_scan_mode(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int val = *((int *)name); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_MODE - mode %s", + netdev->name, (val = SCAN_TYPE_ACTIVE) ? "active" : + (val = SCAN_TYPE_PASSIVE) ? "passive" : "<invalid>"); + + if (val != SCAN_TYPE_ACTIVE && val != SCAN_TYPE_PASSIVE) + ret = -EINVAL; + else + priv->scan_mode = val; + + return ret; +} + +static int at76_iw_get_scan_mode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int *param = (int *)extra; + + param[0] = priv->scan_mode; + return 0; +} + +#define AT76_SET_HANDLER(h, f) [h - SIOCIWFIRST] = (iw_handler) f + +/* Standard wireless handlers */ +static const iw_handler at76_handlers[] = { + AT76_SET_HANDLER(SIOCSIWCOMMIT, at76_iw_handler_commit), + AT76_SET_HANDLER(SIOCGIWNAME, at76_iw_handler_get_name), + AT76_SET_HANDLER(SIOCSIWFREQ, at76_iw_handler_set_freq), + AT76_SET_HANDLER(SIOCGIWFREQ, at76_iw_handler_get_freq), + AT76_SET_HANDLER(SIOCSIWMODE, at76_iw_handler_set_mode), + AT76_SET_HANDLER(SIOCGIWMODE, at76_iw_handler_get_mode), + AT76_SET_HANDLER(SIOCGIWRANGE, at76_iw_handler_get_range), + AT76_SET_HANDLER(SIOCSIWSPY, at76_iw_handler_set_spy), + AT76_SET_HANDLER(SIOCGIWSPY, at76_iw_handler_get_spy), + AT76_SET_HANDLER(SIOCSIWTHRSPY, at76_iw_handler_set_thrspy), + AT76_SET_HANDLER(SIOCGIWTHRSPY, at76_iw_handler_get_thrspy), + AT76_SET_HANDLER(SIOCSIWAP, at76_iw_handler_set_wap), + AT76_SET_HANDLER(SIOCGIWAP, at76_iw_handler_get_wap), + AT76_SET_HANDLER(SIOCSIWSCAN, at76_iw_handler_set_scan), + AT76_SET_HANDLER(SIOCGIWSCAN, at76_iw_handler_get_scan), + AT76_SET_HANDLER(SIOCSIWESSID, at76_iw_handler_set_essid), + AT76_SET_HANDLER(SIOCGIWESSID, at76_iw_handler_get_essid), + AT76_SET_HANDLER(SIOCSIWRATE, at76_iw_handler_set_rate), + AT76_SET_HANDLER(SIOCGIWRATE, at76_iw_handler_get_rate), + AT76_SET_HANDLER(SIOCSIWRTS, at76_iw_handler_set_rts), + AT76_SET_HANDLER(SIOCGIWRTS, at76_iw_handler_get_rts), + AT76_SET_HANDLER(SIOCSIWFRAG, at76_iw_handler_set_frag), + AT76_SET_HANDLER(SIOCGIWFRAG, at76_iw_handler_get_frag), + AT76_SET_HANDLER(SIOCGIWTXPOW, at76_iw_handler_get_txpow), + AT76_SET_HANDLER(SIOCSIWRETRY, at76_iw_handler_set_retry), + AT76_SET_HANDLER(SIOCGIWRETRY, at76_iw_handler_get_retry), + AT76_SET_HANDLER(SIOCSIWENCODE, at76_iw_handler_set_encode), + AT76_SET_HANDLER(SIOCGIWENCODE, at76_iw_handler_get_encode), + AT76_SET_HANDLER(SIOCSIWPOWER, at76_iw_handler_set_power), + AT76_SET_HANDLER(SIOCGIWPOWER, at76_iw_handler_get_power) +}; + +#define AT76_SET_PRIV(h, f) [h - SIOCIWFIRSTPRIV] = (iw_handler) f + +/* Private wireless handlers */ +static const iw_handler at76_priv_handlers[] = { + AT76_SET_PRIV(AT76_SET_SHORT_PREAMBLE, at76_iw_set_short_preamble), + AT76_SET_PRIV(AT76_GET_SHORT_PREAMBLE, at76_iw_get_short_preamble), + AT76_SET_PRIV(AT76_SET_DEBUG, at76_iw_set_debug), + AT76_SET_PRIV(AT76_GET_DEBUG, at76_iw_get_debug), + AT76_SET_PRIV(AT76_SET_POWERSAVE_MODE, at76_iw_set_powersave_mode), + AT76_SET_PRIV(AT76_GET_POWERSAVE_MODE, at76_iw_get_powersave_mode), + AT76_SET_PRIV(AT76_SET_SCAN_TIMES, at76_iw_set_scan_times), + AT76_SET_PRIV(AT76_GET_SCAN_TIMES, at76_iw_get_scan_times), + AT76_SET_PRIV(AT76_SET_SCAN_MODE, at76_iw_set_scan_mode), + AT76_SET_PRIV(AT76_GET_SCAN_MODE, at76_iw_get_scan_mode), +}; + +/* Names and arguments of private wireless handlers */ +static const struct iw_priv_args at76_priv_args[] = { + /* 0 - long, 1 - short */ + {AT76_SET_SHORT_PREAMBLE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"}, + + {AT76_GET_SHORT_PREAMBLE, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_preamble"}, + + /* we must pass the new debug mask as a string, because iwpriv cannot + * parse hex numbers starting with 0x :-( */ + {AT76_SET_DEBUG, + IW_PRIV_TYPE_CHAR | 10, 0, "set_debug"}, + + {AT76_GET_DEBUG, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_debug"}, + + /* 1 - active, 2 - power save, 3 - smart power save */ + {AT76_SET_POWERSAVE_MODE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_powersave"}, + + {AT76_GET_POWERSAVE_MODE, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_powersave"}, + + /* min_channel_time, max_channel_time */ + {AT76_SET_SCAN_TIMES, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_scan_times"}, + + {AT76_GET_SCAN_TIMES, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, "get_scan_times"}, + + /* 0 - active, 1 - passive scan */ + {AT76_SET_SCAN_MODE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_scan_mode"}, + + {AT76_GET_SCAN_MODE, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_scan_mode"}, +}; + +static const struct iw_handler_def at76_handler_def = { + .num_standard = ARRAY_SIZE(at76_handlers), + .num_private = ARRAY_SIZE(at76_priv_handlers), + .num_private_args = ARRAY_SIZE(at76_priv_args), + .standard = at76_handlers, + .private = at76_priv_handlers, + .private_args = at76_priv_args, + .get_wireless_stats = at76_get_wireless_stats, +}; + +static const u8 snapsig[] = { 0xaa, 0xaa, 0x03 }; + +/* RFC 1042 encapsulates Ethernet frames in 802.2 SNAP (0xaa, 0xaa, 0x03) with + * a SNAP OID of 0 (0x00, 0x00, 0x00) */ +static const u8 rfc1042sig[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; + +static int at76_tx(struct sk_buff *skb, struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + struct net_device_stats *stats = &priv->stats; + int ret = 0; + int wlen; + int submit_len; + struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer; + struct ieee80211_hdr_3addr *i802_11_hdr = + (struct ieee80211_hdr_3addr *)tx_buffer->packet; + u8 *payload = i802_11_hdr->payload; + struct ethhdr *eh = (struct ethhdr *)skb->data; + + if (netif_queue_stopped(netdev)) { + printk(KERN_ERR "%s: %s called while netdev is stopped\n", + netdev->name, __func__); + /* skip this packet */ + dev_kfree_skb(skb); + return 0; + } + + if (priv->tx_urb->status == -EINPROGRESS) { + printk(KERN_ERR "%s: %s called while tx urb is pending\n", + netdev->name, __func__); + /* skip this packet */ + dev_kfree_skb(skb); + return 0; + } + + if (skb->len < ETH_HLEN) { + printk(KERN_ERR "%s: %s: skb too short (%d)\n", + netdev->name, __func__, skb->len); + dev_kfree_skb(skb); + return 0; + } + + at76_ledtrig_tx_activity(); /* tell ledtrigger we send a packet */ + + /* we can get rid of memcpy if we set netdev->hard_header_len to + reserve enough space, but we would need to keep the skb around */ + + if (ntohs(eh->h_proto) <= ETH_DATA_LEN) { + /* this is a 802.3 packet */ + if (skb->len >= ETH_HLEN + sizeof(rfc1042sig) + && skb->data[ETH_HLEN] == rfc1042sig[0] + && skb->data[ETH_HLEN + 1] == rfc1042sig[1]) { + /* higher layer delivered SNAP header - keep it */ + memcpy(payload, skb->data + ETH_HLEN, + skb->len - ETH_HLEN); + wlen = IEEE80211_3ADDR_LEN + skb->len - ETH_HLEN; + } else { + printk(KERN_ERR "%s: dropping non-SNAP 802.2 packet " + "(DSAP 0x%02x SSAP 0x%02x cntrl 0x%02x)\n", + priv->netdev->name, skb->data[ETH_HLEN], + skb->data[ETH_HLEN + 1], + skb->data[ETH_HLEN + 2]); + dev_kfree_skb(skb); + return 0; + } + } else { + /* add RFC 1042 header in front */ + memcpy(payload, rfc1042sig, sizeof(rfc1042sig)); + memcpy(payload + sizeof(rfc1042sig), &eh->h_proto, + skb->len - offsetof(struct ethhdr, h_proto)); + wlen = IEEE80211_3ADDR_LEN + sizeof(rfc1042sig) + skb->len - + offsetof(struct ethhdr, h_proto); + } + + /* make wireless header */ + i802_11_hdr->frame_ctl = + cpu_to_le16(IEEE80211_FTYPE_DATA | + (priv->wep_enabled ? IEEE80211_FCTL_PROTECTED : 0) | + (priv->iw_mode == + IW_MODE_INFRA ? IEEE80211_FCTL_TODS : 0)); + + if (priv->iw_mode == IW_MODE_ADHOC) { + memcpy(i802_11_hdr->addr1, eh->h_dest, ETH_ALEN); + memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN); + memcpy(i802_11_hdr->addr3, priv->bssid, ETH_ALEN); + } else if (priv->iw_mode == IW_MODE_INFRA) { + memcpy(i802_11_hdr->addr1, priv->bssid, ETH_ALEN); + memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN); + memcpy(i802_11_hdr->addr3, eh->h_dest, ETH_ALEN); + } + + i802_11_hdr->duration_id = cpu_to_le16(0); + i802_11_hdr->seq_ctl = cpu_to_le16(0); + + /* setup 'Atmel' header */ + tx_buffer->wlength = cpu_to_le16(wlen); + tx_buffer->tx_rate = priv->txrate; + /* for broadcast destination addresses, the firmware 0.100.x + seems to choose the highest rate set with CMD_STARTUP in + basic_rate_set replacing this value */ + + memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved)); + + tx_buffer->padding = at76_calc_padding(wlen); + submit_len = wlen + AT76_TX_HDRLEN + tx_buffer->padding; + + at76_dbg(DBG_TX_DATA_CONTENT, "%s skb->data %s", priv->netdev->name, + hex2str(skb->data, 32)); + at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr %s", + priv->netdev->name, + le16_to_cpu(tx_buffer->wlength), + tx_buffer->padding, tx_buffer->tx_rate, + hex2str(i802_11_hdr, sizeof(*i802_11_hdr))); + at76_dbg(DBG_TX_DATA_CONTENT, "%s payload %s", priv->netdev->name, + hex2str(payload, 48)); + + /* send stuff */ + netif_stop_queue(netdev); + netdev->trans_start = jiffies; + + usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer, + submit_len, at76_tx_callback, priv); + ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); + if (ret) { + stats->tx_errors++; + printk(KERN_ERR "%s: error in tx submit urb: %d\n", + netdev->name, ret); + if (ret == -EINVAL) + printk(KERN_ERR + "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n", + priv->netdev->name, priv->tx_urb, + priv->tx_urb->hcpriv, priv->tx_urb->complete); + } else { + stats->tx_bytes += skb->len; + dev_kfree_skb(skb); + } + + return ret; +} + +static void at76_tx_timeout(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + + if (!priv) + return; + dev_warn(&netdev->dev, "tx timeout."); + + usb_unlink_urb(priv->tx_urb); + priv->stats.tx_errors++; +} + static int at76_submit_rx_urb(struct at76_priv *priv) { int ret; @@ -1327,7 +3270,7 @@ static int at76_submit_rx_urb(struct at76_priv *priv) if (!priv->rx_urb) { printk(KERN_ERR "%s: %s: priv->rx_urb is NULL\n", - wiphy_name(priv->hw->wiphy), __func__); + priv->netdev->name, __func__); return -EFAULT; } @@ -1335,7 +3278,7 @@ static int at76_submit_rx_urb(struct at76_priv *priv) skb = dev_alloc_skb(sizeof(struct at76_rx_buffer)); if (!skb) { printk(KERN_ERR "%s: cannot allocate rx skbuff\n", - wiphy_name(priv->hw->wiphy)); + priv->netdev->name); ret = -ENOMEM; goto exit; } @@ -1355,18 +3298,110 @@ static int at76_submit_rx_urb(struct at76_priv *priv) "usb_submit_urb returned -ENODEV"); else printk(KERN_ERR "%s: rx, usb_submit_urb failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); } exit: if (ret < 0 && ret != -ENODEV) printk(KERN_ERR "%s: cannot submit rx urb - please unload the " "driver and/or power cycle the device\n", - wiphy_name(priv->hw->wiphy)); + priv->netdev->name); return ret; } +static int at76_open(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + at76_dbg(DBG_PROC_ENTRY, "%s(): entry", __func__); + + if (mutex_lock_interruptible(&priv->mtx)) + return -EINTR; + + /* if netdev->dev_addr != priv->mac_addr we must + set the mac address in the device ! */ + if (compare_ether_addr(netdev->dev_addr, priv->mac_addr)) { + if (at76_add_mac_address(priv, netdev->dev_addr) >= 0) + at76_dbg(DBG_PROGRESS, "%s: set new MAC addr %s", + netdev->name, mac2str(netdev->dev_addr)); + } + + priv->scan_state = SCAN_IDLE; + priv->last_scan = jiffies; + + ret = at76_submit_rx_urb(priv); + if (ret < 0) { + printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n", + netdev->name, ret); + goto error; + } + + schedule_delayed_work(&priv->dwork_restart, 0); + + at76_dbg(DBG_PROC_ENTRY, "%s(): end", __func__); +error: + mutex_unlock(&priv->mtx); + return ret < 0 ? ret : 0; +} + +static int at76_stop(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_DEVSTART, "%s: ENTER", __func__); + + if (mutex_lock_interruptible(&priv->mtx)) + return -EINTR; + + at76_quiesce(priv); + + if (!priv->device_unplugged) { + /* We are called by "ifconfig ethX down", not because the + * device is not available anymore. */ + at76_set_radio(priv, 0); + + /* We unlink rx_urb because at76_open() re-submits it. + * If unplugged, at76_delete_device() takes care of it. */ + usb_kill_urb(priv->rx_urb); + } + + /* free the bss_list */ + at76_free_bss_list(priv); + + mutex_unlock(&priv->mtx); + at76_dbg(DBG_DEVSTART, "%s: EXIT", __func__); + + return 0; +} + +static void at76_ethtool_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *info) +{ + struct at76_priv *priv = netdev_priv(netdev); + + strncpy(info->driver, DRIVER_NAME, sizeof(info->driver)); + strncpy(info->version, DRIVER_VERSION, sizeof(info->version)); + + usb_make_path(priv->udev, info->bus_info, sizeof(info->bus_info)); + + snprintf(info->fw_version, sizeof(info->fw_version), "%d.%d.%d-%d", + priv->fw_version.major, priv->fw_version.minor, + priv->fw_version.patch, priv->fw_version.build); +} + +static u32 at76_ethtool_get_link(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + return priv->mac_state == MAC_CONNECTED; +} + +static struct ethtool_ops at76_ethtool_ops = { + .get_drvinfo = at76_ethtool_get_drvinfo, + .get_link = at76_ethtool_get_link, +}; + /* Download external firmware */ static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe) { @@ -1463,6 +3498,406 @@ exit: return ret; } +static int at76_match_essid(struct at76_priv *priv, struct bss_info *ptr) +{ + /* common criteria for both modi */ + + int ret = (priv->essid_size == 0 /* ANY ssid */ || + (priv->essid_size == ptr->ssid_len && + !memcmp(priv->essid, ptr->ssid, ptr->ssid_len))); + if (!ret) + at76_dbg(DBG_BSS_MATCH, + "%s bss table entry %p: essid didn't match", + priv->netdev->name, ptr); + return ret; +} + +static inline int at76_match_mode(struct at76_priv *priv, struct bss_info *ptr) +{ + int ret; + + if (priv->iw_mode == IW_MODE_ADHOC) + ret = ptr->capa & WLAN_CAPABILITY_IBSS; + else + ret = ptr->capa & WLAN_CAPABILITY_ESS; + if (!ret) + at76_dbg(DBG_BSS_MATCH, + "%s bss table entry %p: mode didn't match", + priv->netdev->name, ptr); + return ret; +} + +static int at76_match_rates(struct at76_priv *priv, struct bss_info *ptr) +{ + int i; + + for (i = 0; i < ptr->rates_len; i++) { + u8 rate = ptr->rates[i]; + + if (!(rate & 0x80)) + continue; + + /* this is a basic rate we have to support + (see IEEE802.11, ch. 7.3.2.2) */ + if (rate != (0x80 | hw_rates[0]) + && rate != (0x80 | hw_rates[1]) + && rate != (0x80 | hw_rates[2]) + && rate != (0x80 | hw_rates[3])) { + at76_dbg(DBG_BSS_MATCH, + "%s: bss table entry %p: basic rate %02x not " + "supported", priv->netdev->name, ptr, rate); + return 0; + } + } + + /* if we use short preamble, the bss must support it */ + if (priv->preamble_type == PREAMBLE_TYPE_SHORT && + !(ptr->capa & WLAN_CAPABILITY_SHORT_PREAMBLE)) { + at76_dbg(DBG_BSS_MATCH, + "%s: %p does not support short preamble", + priv->netdev->name, ptr); + return 0; + } else + return 1; +} + +static inline int at76_match_wep(struct at76_priv *priv, struct bss_info *ptr) +{ + if (!priv->wep_enabled && ptr->capa & WLAN_CAPABILITY_PRIVACY) { + /* we have disabled WEP, but the BSS signals privacy */ + at76_dbg(DBG_BSS_MATCH, + "%s: bss table entry %p: requires encryption", + priv->netdev->name, ptr); + return 0; + } + /* otherwise if the BSS does not signal privacy it may well + accept encrypted packets from us ... */ + return 1; +} + +static inline int at76_match_bssid(struct at76_priv *priv, struct bss_info *ptr) +{ + if (!priv->wanted_bssid_valid || + !compare_ether_addr(ptr->bssid, priv->wanted_bssid)) + return 1; + + at76_dbg(DBG_BSS_MATCH, + "%s: requested bssid - %s does not match", + priv->netdev->name, mac2str(priv->wanted_bssid)); + at76_dbg(DBG_BSS_MATCH, + " AP bssid - %s of bss table entry %p", + mac2str(ptr->bssid), ptr); + return 0; +} + +/** + * at76_match_bss - try to find a matching bss in priv->bss + * + * last - last bss tried + * + * last == NULL signals a new round starting with priv->bss_list.next + * this function must be called inside an acquired priv->bss_list_spinlock + * otherwise the timeout on bss may remove the newly chosen entry + */ +static struct bss_info *at76_match_bss(struct at76_priv *priv, + struct bss_info *last) +{ + struct bss_info *ptr = NULL; + struct list_head *curr; + + curr = last ? last->list.next : priv->bss_list.next; + while (curr != &priv->bss_list) { + ptr = list_entry(curr, struct bss_info, list); + if (at76_match_essid(priv, ptr) && at76_match_mode(priv, ptr) + && at76_match_wep(priv, ptr) && at76_match_rates(priv, ptr) + && at76_match_bssid(priv, ptr)) + break; + curr = curr->next; + } + + if (curr == &priv->bss_list) + ptr = NULL; + /* otherwise ptr points to the struct bss_info we have chosen */ + + at76_dbg(DBG_BSS_TABLE, "%s %s: returned %p", priv->netdev->name, + __func__, ptr); + return ptr; +} + +/* Start joining a matching BSS, or create own IBSS */ +static void at76_work_join(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_join); + int ret; + unsigned long flags; + + mutex_lock(&priv->mtx); + + WARN_ON(priv->mac_state != MAC_JOINING); + if (priv->mac_state != MAC_JOINING) + goto exit; + + /* secure the access to priv->curr_bss ! */ + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + priv->curr_bss = at76_match_bss(priv, priv->curr_bss); + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); + + if (!priv->curr_bss) { + /* here we haven't found a matching (i)bss ... */ + if (priv->iw_mode == IW_MODE_ADHOC) { + at76_set_mac_state(priv, MAC_OWN_IBSS); + at76_start_ibss(priv); + goto exit; + } + /* haven't found a matching BSS in infra mode - try again */ + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + goto exit; + } + + ret = at76_join_bss(priv, priv->curr_bss); + if (ret < 0) { + printk(KERN_ERR "%s: join_bss failed with %d\n", + priv->netdev->name, ret); + goto exit; + } + + ret = at76_wait_completion(priv, CMD_JOIN); + if (ret != CMD_STATUS_COMPLETE) { + if (ret != CMD_STATUS_TIME_OUT) + printk(KERN_ERR "%s: join_bss completed with %d\n", + priv->netdev->name, ret); + else + printk(KERN_INFO "%s: join_bss ssid %s timed out\n", + priv->netdev->name, + mac2str(priv->curr_bss->bssid)); + + /* retry next BSS immediately */ + schedule_work(&priv->work_join); + goto exit; + } + + /* here we have joined the (I)BSS */ + if (priv->iw_mode == IW_MODE_ADHOC) { + struct bss_info *bptr = priv->curr_bss; + at76_set_mac_state(priv, MAC_CONNECTED); + /* get ESSID, BSSID and channel for priv->curr_bss */ + priv->essid_size = bptr->ssid_len; + memcpy(priv->essid, bptr->ssid, bptr->ssid_len); + memcpy(priv->bssid, bptr->bssid, ETH_ALEN); + priv->channel = bptr->channel; + at76_iwevent_bss_connect(priv->netdev, bptr->bssid); + netif_carrier_on(priv->netdev); + netif_start_queue(priv->netdev); + /* just to be sure */ + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + } else { + /* send auth req */ + priv->retries = AUTH_RETRIES; + at76_set_mac_state(priv, MAC_AUTH); + at76_auth_req(priv, priv->curr_bss, 1, NULL); + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__); + schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Reap scan results */ +static void at76_dwork_get_scan(struct work_struct *work) +{ + int status; + int ret; + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_get_scan.work); + + mutex_lock(&priv->mtx); + WARN_ON(priv->mac_state != MAC_SCANNING); + if (priv->mac_state != MAC_SCANNING) + goto exit; + + status = at76_get_cmd_status(priv->udev, CMD_SCAN); + if (status < 0) { + printk(KERN_ERR "%s: %s: at76_get_cmd_status failed with %d\n", + priv->netdev->name, __func__, status); + status = CMD_STATUS_IN_PROGRESS; + /* INFO: Hope it was a one off error - if not, scanning + further down the line and stop this cycle */ + } + at76_dbg(DBG_PROGRESS, + "%s %s: got cmd_status %d (state %s, need_any %d)", + priv->netdev->name, __func__, status, + mac_states[priv->mac_state], priv->scan_need_any); + + if (status != CMD_STATUS_COMPLETE) { + if ((status != CMD_STATUS_IN_PROGRESS) && + (status != CMD_STATUS_IDLE)) + printk(KERN_ERR "%s: %s: Bad scan status: %s\n", + priv->netdev->name, __func__, + at76_get_cmd_status_string(status)); + + /* the first cmd status after scan start is always a IDLE -> + start the timer to poll again until COMPLETED */ + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer for %d ticks", + __func__, __LINE__, SCAN_POLL_INTERVAL); + schedule_delayed_work(&priv->dwork_get_scan, + SCAN_POLL_INTERVAL); + goto exit; + } + + if (at76_debug & DBG_BSS_TABLE) + at76_dump_bss_table(priv); + + if (priv->scan_need_any) { + ret = at76_start_scan(priv, 0); + if (ret < 0) + printk(KERN_ERR + "%s: %s: start_scan (ANY) failed with %d\n", + priv->netdev->name, __func__, ret); + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer for %d ticks", __func__, + __LINE__, SCAN_POLL_INTERVAL); + schedule_delayed_work(&priv->dwork_get_scan, + SCAN_POLL_INTERVAL); + priv->scan_need_any = 0; + } else { + priv->scan_state = SCAN_COMPLETED; + /* report the end of scan to user space */ + at76_iwevent_scan_complete(priv->netdev); + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Handle loss of beacons from the AP */ +static void at76_dwork_beacon(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_beacon.work); + + mutex_lock(&priv->mtx); + if (priv->mac_state != MAC_CONNECTED || priv->iw_mode != IW_MODE_INFRA) + goto exit; + + /* We haven't received any beacons from out AP for BEACON_TIMEOUT */ + printk(KERN_INFO "%s: lost beacon bssid %s\n", + priv->netdev->name, mac2str(priv->curr_bss->bssid)); + + netif_carrier_off(priv->netdev); + netif_stop_queue(priv->netdev); + at76_iwevent_bss_disconnect(priv->netdev); + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + +exit: + mutex_unlock(&priv->mtx); +} + +/* Handle authentication response timeout */ +static void at76_dwork_auth(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_auth.work); + + mutex_lock(&priv->mtx); + WARN_ON(priv->mac_state != MAC_AUTH); + if (priv->mac_state != MAC_AUTH) + goto exit; + + at76_dbg(DBG_PROGRESS, "%s: authentication response timeout", + priv->netdev->name); + + if (priv->retries-- >= 0) { + at76_auth_req(priv, priv->curr_bss, 1, NULL); + at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", + __func__, __LINE__); + schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT); + } else { + /* try to get next matching BSS */ + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Handle association response timeout */ +static void at76_dwork_assoc(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_assoc.work); + + mutex_lock(&priv->mtx); + WARN_ON(priv->mac_state != MAC_ASSOC); + if (priv->mac_state != MAC_ASSOC) + goto exit; + + at76_dbg(DBG_PROGRESS, "%s: association response timeout", + priv->netdev->name); + + if (priv->retries-- >= 0) { + at76_assoc_req(priv, priv->curr_bss); + at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", + __func__, __LINE__); + schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT); + } else { + /* try to get next matching BSS */ + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Read new bssid in ad-hoc mode */ +static void at76_work_new_bss(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_new_bss); + int ret; + struct mib_mac_mgmt mac_mgmt; + + mutex_lock(&priv->mtx); + + ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, &mac_mgmt, + sizeof(struct mib_mac_mgmt)); + if (ret < 0) { + printk(KERN_ERR "%s: at76_get_mib failed: %d\n", + priv->netdev->name, ret); + goto exit; + } + + at76_dbg(DBG_PROGRESS, "ibss_change = 0x%2x", mac_mgmt.ibss_change); + memcpy(priv->bssid, mac_mgmt.current_bssid, ETH_ALEN); + at76_dbg(DBG_PROGRESS, "using BSSID %s", mac2str(priv->bssid)); + + at76_iwevent_bss_connect(priv->netdev, priv->bssid); + + priv->mib_buf.type = MIB_MAC_MGMT; + priv->mib_buf.size = 1; + priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change); + priv->mib_buf.data.byte = 0; + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n", + priv->netdev->name, ret); + +exit: + mutex_unlock(&priv->mtx); +} + static int at76_startup_device(struct at76_priv *priv) { struct at76_card_config *ccfg = &priv->card_config; @@ -1470,14 +3905,14 @@ static int at76_startup_device(struct at76_priv *priv) at76_dbg(DBG_PARAMS, "%s param: ssid %.*s (%s) mode %s ch %d wep %s key %d " - "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size, - priv->essid, hex2str(priv->essid, IW_ESSID_MAX_SIZE), + "keylen %d", priv->netdev->name, priv->essid_size, priv->essid, + hex2str(priv->essid, IW_ESSID_MAX_SIZE), priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra", priv->channel, priv->wep_enabled ? "enabled" : "disabled", priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]); at76_dbg(DBG_PARAMS, "%s param: preamble %s rts %d retry %d frag %d " - "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy), + "txrate %s auth_mode %d", priv->netdev->name, preambles[priv->preamble_type], priv->rts_threshold, priv->short_retry_limit, priv->frag_threshold, priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate == @@ -1488,7 +3923,7 @@ static int at76_startup_device(struct at76_priv *priv) at76_dbg(DBG_PARAMS, "%s param: pm_mode %d pm_period %d auth_mode %s " "scan_times %d %d scan_mode %s", - wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period, + priv->netdev->name, priv->pm_mode, priv->pm_period, priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret", priv->scan_min_time, priv->scan_max_time, priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive"); @@ -1522,8 +3957,7 @@ static int at76_startup_device(struct at76_priv *priv) ccfg->ssid_len = priv->essid_size; ccfg->wep_default_key_id = priv->wep_key_id; - memcpy(ccfg->wep_default_key_value, priv->wep_keys, - sizeof(priv->wep_keys)); + memcpy(ccfg->wep_default_key_value, priv->wep_keys, 4 * WEP_KEY_LEN); ccfg->short_preamble = priv->preamble_type; ccfg->beacon_period = cpu_to_le16(priv->beacon_period); @@ -1532,7 +3966,7 @@ static int at76_startup_device(struct at76_priv *priv) sizeof(struct at76_card_config)); if (ret < 0) { printk(KERN_ERR "%s: at76_set_card_command failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -1578,6 +4012,69 @@ static int at76_startup_device(struct at76_priv *priv) return 0; } +/* Restart the interface */ +static void at76_dwork_restart(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_restart.work); + + mutex_lock(&priv->mtx); + + netif_carrier_off(priv->netdev); /* stop netdev watchdog */ + netif_stop_queue(priv->netdev); /* stop tx data packets */ + + at76_startup_device(priv); + + if (priv->iw_mode != IW_MODE_MONITOR) { + priv->netdev->type = ARPHRD_ETHER; + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + } else { + priv->netdev->type = ARPHRD_IEEE80211_RADIOTAP; + at76_start_monitor(priv); + } + + mutex_unlock(&priv->mtx); +} + +/* Initiate scanning */ +static void at76_work_start_scan(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_start_scan); + int ret; + + mutex_lock(&priv->mtx); + + WARN_ON(priv->mac_state != MAC_SCANNING); + if (priv->mac_state != MAC_SCANNING) + goto exit; + + /* only clear the bss list when a scan is actively initiated, + * otherwise simply rely on at76_bss_list_timeout */ + if (priv->scan_state == SCAN_IN_PROGRESS) { + at76_free_bss_list(priv); + priv->scan_need_any = 1; + } else + priv->scan_need_any = 0; + + ret = at76_start_scan(priv, 1); + + if (ret < 0) + printk(KERN_ERR "%s: %s: start_scan failed with %d\n", + priv->netdev->name, __func__, ret); + else { + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer for %d ticks", + __func__, __LINE__, SCAN_POLL_INTERVAL); + schedule_delayed_work(&priv->dwork_get_scan, + SCAN_POLL_INTERVAL); + } + +exit: + mutex_unlock(&priv->mtx); +} + /* Enable or disable promiscuous mode */ static void at76_work_set_promisc(struct work_struct *work) { @@ -1595,7 +4092,7 @@ static void at76_work_set_promisc(struct work_struct *work) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (promiscuous_mode) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); mutex_unlock(&priv->mtx); } @@ -1611,759 +4108,1088 @@ static void at76_work_submit_rx(struct work_struct *work) mutex_unlock(&priv->mtx); } -static void at76_rx_tasklet(unsigned long param) +/* We got an association response */ +static void at76_rx_mgmt_assoc(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - struct urb *urb = (struct urb *)param; - struct at76_priv *priv = urb->context; - struct at76_rx_buffer *buf; - struct ieee80211_rx_status rx_status = { 0 }; - - if (priv->device_unplugged) { - at76_dbg(DBG_DEVSTART, "device unplugged"); - if (urb) - at76_dbg(DBG_DEVSTART, "urb status %d", urb->status); + struct ieee80211_assoc_response *resp = + (struct ieee80211_assoc_response *)buf->packet; + u16 assoc_id = le16_to_cpu(resp->aid); + u16 status = le16_to_cpu(resp->status); + + at76_dbg(DBG_RX_MGMT, "%s: rx AssocResp bssid %s capa 0x%04x status " + "0x%04x assoc_id 0x%04x rates %s", priv->netdev->name, + mac2str(resp->header.addr3), le16_to_cpu(resp->capability), + status, assoc_id, hex2str(resp->info_element->data, + resp->info_element->len)); + + if (priv->mac_state != MAC_ASSOC) { + printk(KERN_INFO "%s: AssocResp in state %s ignored\n", + priv->netdev->name, mac_states[priv->mac_state]); return; } - if (!priv->rx_skb || !priv->rx_skb->data) - return; - - buf = (struct at76_rx_buffer *)priv->rx_skb->data; - - if (urb->status != 0) { - if (urb->status != -ENOENT && urb->status != -ECONNRESET) - at76_dbg(DBG_URB, - "%s %s: - nonzero Rx bulk status received: %d", - __func__, wiphy_name(priv->hw->wiphy), - urb->status); - return; + BUG_ON(!priv->curr_bss); + + cancel_delayed_work(&priv->dwork_assoc); + if (status == WLAN_STATUS_SUCCESS) { + struct bss_info *ptr = priv->curr_bss; + priv->assoc_id = assoc_id & 0x3fff; + /* update iwconfig params */ + memcpy(priv->bssid, ptr->bssid, ETH_ALEN); + memcpy(priv->essid, ptr->ssid, ptr->ssid_len); + priv->essid_size = ptr->ssid_len; + priv->channel = ptr->channel; + schedule_work(&priv->work_assoc_done); + } else { + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); } +} - at76_dbg(DBG_RX_ATMEL_HDR, - "%s: rx frame: rate %d rssi %d noise %d link %d", - wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi, - buf->noise_level, buf->link_quality); - - skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength) + AT76_RX_HDRLEN); - at76_dbg_dump(DBG_RX_DATA, &priv->rx_skb->data[AT76_RX_HDRLEN], - priv->rx_skb->len, "RX: len=%d", - (int)(priv->rx_skb->len - AT76_RX_HDRLEN)); +/* Process disassociation request from the AP */ +static void at76_rx_mgmt_disassoc(struct at76_priv *priv, + struct at76_rx_buffer *buf) +{ + struct ieee80211_disassoc *resp = + (struct ieee80211_disassoc *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &resp->header; + + at76_dbg(DBG_RX_MGMT, + "%s: rx DisAssoc bssid %s reason 0x%04x destination %s", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(resp->reason), mac2str(mgmt->addr1)); + + /* We are not connected, ignore */ + if (priv->mac_state == MAC_SCANNING || priv->mac_state == MAC_INIT + || !priv->curr_bss) + return; - rx_status.signal = buf->rssi; - /* FIXME: is rate_idx still present in structure? */ - rx_status.rate_idx = buf->rx_rate; - rx_status.flag |= RX_FLAG_DECRYPTED; - rx_status.flag |= RX_FLAG_IV_STRIPPED; + /* Not our BSSID, ignore */ + if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid)) + return; - skb_pull(priv->rx_skb, AT76_RX_HDRLEN); - at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d", - priv->rx_skb->len, priv->rx_skb->data_len); - ieee80211_rx_irqsafe(priv->hw, priv->rx_skb, &rx_status); + /* Not for our STA and not broadcast, ignore */ + if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1) + && !is_broadcast_ether_addr(mgmt->addr1)) + return; - /* Use a new skb for the next receive */ - priv->rx_skb = NULL; + if (priv->mac_state != MAC_ASSOC && priv->mac_state != MAC_CONNECTED + && priv->mac_state != MAC_JOINING) { + printk(KERN_INFO "%s: DisAssoc in state %s ignored\n", + priv->netdev->name, mac_states[priv->mac_state]); + return; + } - at76_submit_rx_urb(priv); + if (priv->mac_state == MAC_CONNECTED) { + netif_carrier_off(priv->netdev); + netif_stop_queue(priv->netdev); + at76_iwevent_bss_disconnect(priv->netdev); + } + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); } -/* Load firmware into kernel memory and parse it */ -static struct fwentry *at76_load_firmware(struct usb_device *udev, - enum board_type board_type) +static void at76_rx_mgmt_auth(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - int ret; - char *str; - struct at76_fw_header *fwh; - struct fwentry *fwe = &firmwares[board_type]; - - mutex_lock(&fw_mutex); - - if (fwe->loaded) { - at76_dbg(DBG_FW, "re-using previously loaded fw"); - goto exit; + struct ieee80211_auth *resp = (struct ieee80211_auth *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &resp->header; + int seq_nr = le16_to_cpu(resp->transaction); + int alg = le16_to_cpu(resp->algorithm); + int status = le16_to_cpu(resp->status); + + at76_dbg(DBG_RX_MGMT, + "%s: rx AuthFrame bssid %s alg %d seq_nr %d status %d " + "destination %s", priv->netdev->name, mac2str(mgmt->addr3), + alg, seq_nr, status, mac2str(mgmt->addr1)); + + if (alg == WLAN_AUTH_SHARED_KEY && seq_nr == 2) + at76_dbg(DBG_RX_MGMT, "%s: AuthFrame challenge %s ...", + priv->netdev->name, hex2str(resp->info_element, 18)); + + if (priv->mac_state != MAC_AUTH) { + printk(KERN_INFO "%s: ignored AuthFrame in state %s\n", + priv->netdev->name, mac_states[priv->mac_state]); + return; } - - at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname); - ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev); - if (ret < 0) { - dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n", - fwe->fwname); - dev_printk(KERN_ERR, &udev->dev, - "you may need to download the firmware from " - "http://developer.berlios.de/projects/at76c503a/\n"); - goto exit; + if (priv->auth_mode != alg) { + printk(KERN_INFO "%s: ignored AuthFrame for alg %d\n", + priv->netdev->name, alg); + return; } - at76_dbg(DBG_FW, "got it."); - fwh = (struct at76_fw_header *)(fwe->fw->data); + BUG_ON(!priv->curr_bss); - if (fwe->fw->size <= sizeof(*fwh)) { - dev_printk(KERN_ERR, &udev->dev, - "firmware is too short (0x%zx)\n", fwe->fw->size); - goto exit; + /* Not our BSSID or not for our STA, ignore */ + if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid) + || compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1)) + return; + + cancel_delayed_work(&priv->dwork_auth); + if (status != WLAN_STATUS_SUCCESS) { + /* try to join next bss */ + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + return; } - /* CRC currently not checked */ - fwe->board_type = le32_to_cpu(fwh->board_type); - if (fwe->board_type != board_type) { - dev_printk(KERN_ERR, &udev->dev, - "board type mismatch, requested %u, got %u\n", - board_type, fwe->board_type); - goto exit; + if (priv->auth_mode == WLAN_AUTH_OPEN || seq_nr == 4) { + priv->retries = ASSOC_RETRIES; + at76_set_mac_state(priv, MAC_ASSOC); + at76_assoc_req(priv, priv->curr_bss); + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__); + schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT); + return; } - fwe->fw_version.major = fwh->major; - fwe->fw_version.minor = fwh->minor; - fwe->fw_version.patch = fwh->patch; - fwe->fw_version.build = fwh->build; + WARN_ON(seq_nr != 2); + at76_auth_req(priv, priv->curr_bss, seq_nr + 1, resp->info_element); + at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", __func__, + __LINE__); + schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT); +} - str = (char *)fwh + le32_to_cpu(fwh->str_offset); - fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset); - fwe->intfw_size = le32_to_cpu(fwh->int_fw_len); - fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset); - fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len); +static void at76_rx_mgmt_deauth(struct at76_priv *priv, + struct at76_rx_buffer *buf) +{ + struct ieee80211_disassoc *resp = + (struct ieee80211_disassoc *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &resp->header; + + at76_dbg(DBG_RX_MGMT | DBG_PROGRESS, + "%s: rx DeAuth bssid %s reason 0x%04x destination %s", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(resp->reason), mac2str(mgmt->addr1)); + + if (priv->mac_state != MAC_AUTH && priv->mac_state != MAC_ASSOC + && priv->mac_state != MAC_CONNECTED) { + printk(KERN_INFO "%s: DeAuth in state %s ignored\n", + priv->netdev->name, mac_states[priv->mac_state]); + return; + } - fwe->loaded = 1; + BUG_ON(!priv->curr_bss); - dev_printk(KERN_DEBUG, &udev->dev, - "using firmware %s (version %d.%d.%d-%d)\n", - fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build); + /* Not our BSSID, ignore */ + if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid)) + return; - at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type, - le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len), - le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len)); - at76_dbg(DBG_DEVSTART, "firmware id %s", str); + /* Not for our STA and not broadcast, ignore */ + if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1) + && !is_broadcast_ether_addr(mgmt->addr1)) + return; -exit: - mutex_unlock(&fw_mutex); + if (priv->mac_state == MAC_CONNECTED) + at76_iwevent_bss_disconnect(priv->netdev); - if (fwe->loaded) - return fwe; - else - return NULL; + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); } -static void at76_mac80211_tx_callback(struct urb *urb) +static void at76_rx_mgmt_beacon(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - struct at76_priv *priv = urb->context; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb); + int varpar_len; + /* beacon content */ + struct ieee80211_beacon *bdata = (struct ieee80211_beacon *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &bdata->header; + + struct list_head *lptr; + struct bss_info *match; /* entry matching addr3 with its bssid */ + int new_entry = 0; + int len; + struct ieee80211_info_element *ie; + int have_ssid = 0; + int have_rates = 0; + int have_channel = 0; + int keep_going = 1; + unsigned long flags; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + if (priv->mac_state == MAC_CONNECTED) { + /* in state MAC_CONNECTED we use the mgmt_timer to control + the beacon of the BSS */ + BUG_ON(!priv->curr_bss); + + if (!compare_ether_addr(priv->curr_bss->bssid, mgmt->addr3)) { + /* We got our AP's beacon, defer the timeout handler. + Kill pending work first, as schedule_delayed_work() + won't do it. */ + cancel_delayed_work(&priv->dwork_beacon); + schedule_delayed_work(&priv->dwork_beacon, + BEACON_TIMEOUT); + priv->curr_bss->rssi = buf->rssi; + priv->beacons_received++; + goto exit; + } + } - at76_dbg(DBG_MAC80211, "%s()", __func__); + /* look if we have this BSS already in the list */ + match = NULL; - switch (urb->status) { - case 0: - /* success */ - /* FIXME: - * is the frame really ACKed when tx_callback is called ? */ - info->flags |= IEEE80211_TX_STAT_ACK; - break; - case -ENOENT: - case -ECONNRESET: - /* fail, urb has been unlinked */ - /* FIXME: add error message */ - break; - default: - at76_dbg(DBG_URB, "%s - nonzero tx status received: %d", - __func__, urb->status); - break; + if (!list_empty(&priv->bss_list)) { + list_for_each(lptr, &priv->bss_list) { + struct bss_info *bss_ptr = + list_entry(lptr, struct bss_info, list); + if (!compare_ether_addr(bss_ptr->bssid, mgmt->addr3)) { + match = bss_ptr; + break; + } + } } - memset(&info->status, 0, sizeof(info->status)); + if (!match) { + /* BSS not in the list - append it */ + match = kzalloc(sizeof(struct bss_info), GFP_ATOMIC); + if (!match) { + at76_dbg(DBG_BSS_TABLE, + "%s: cannot kmalloc new bss info (%zd byte)", + priv->netdev->name, sizeof(struct bss_info)); + goto exit; + } + new_entry = 1; + list_add_tail(&match->list, &priv->bss_list); + } - ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb); + match->capa = le16_to_cpu(bdata->capability); + match->beacon_interval = le16_to_cpu(bdata->beacon_interval); + match->rssi = buf->rssi; + match->link_qual = buf->link_quality; + match->noise_level = buf->noise_level; + memcpy(match->bssid, mgmt->addr3, ETH_ALEN); + at76_dbg(DBG_RX_BEACON, "%s: bssid %s", priv->netdev->name, + mac2str(match->bssid)); + + ie = bdata->info_element; + + /* length of var length beacon parameters */ + varpar_len = min_t(int, le16_to_cpu(buf->wlength) - + sizeof(struct ieee80211_beacon), + BEACON_MAX_DATA_LENGTH); + + /* This routine steps through the bdata->data array to get + * some useful information about the access point. + * Currently, this implementation supports receipt of: SSID, + * supported transfer rates and channel, in any order, with some + * tolerance for intermittent unknown codes (although this + * functionality may not be necessary as the useful information will + * usually arrive in consecutively, but there have been some + * reports of some of the useful information fields arriving in a + * different order). + * It does not support any more IE types although MFIE_TYPE_TIM may + * be supported (on my AP at least). + * The bdata->data array is about 1500 bytes long but only ~36 of those + * bytes are useful, hence the have_ssid etc optimizations. */ + + while (keep_going && + ((&ie->data[ie->len] - (u8 *)bdata->info_element) <= + varpar_len)) { + + switch (ie->id) { + + case MFIE_TYPE_SSID: + if (have_ssid) + break; - priv->tx_skb = NULL; + len = min_t(int, IW_ESSID_MAX_SIZE, ie->len); - ieee80211_wake_queues(priv->hw); -} + /* we copy only if this is a new entry, + or the incoming SSID is not a hidden SSID. This + will protect us from overwriting a real SSID read + in a ProbeResponse with a hidden one from a + following beacon. */ + if (!new_entry && at76_is_hidden_ssid(ie->data, len)) { + have_ssid = 1; + break; + } -static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct at76_priv *priv = hw->priv; - struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - int padding, submit_len, ret; + match->ssid_len = len; + memcpy(match->ssid, ie->data, len); + at76_dbg(DBG_RX_BEACON, "%s: SSID - %.*s", + priv->netdev->name, len, match->ssid); + have_ssid = 1; + break; - at76_dbg(DBG_MAC80211, "%s()", __func__); + case MFIE_TYPE_RATES: + if (have_rates) + break; - if (priv->tx_urb->status == -EINPROGRESS) { - printk(KERN_ERR "%s: %s called while tx urb is pending\n", - wiphy_name(priv->hw->wiphy), __func__); - return NETDEV_TX_BUSY; - } + match->rates_len = + min_t(int, sizeof(match->rates), ie->len); + memcpy(match->rates, ie->data, match->rates_len); + have_rates = 1; + at76_dbg(DBG_RX_BEACON, "%s: SUPPORTED RATES %s", + priv->netdev->name, + hex2str(ie->data, ie->len)); + break; - ieee80211_stop_queues(hw); + case MFIE_TYPE_DS_SET: + if (have_channel) + break; - at76_ledtrig_tx_activity(); /* tell ledtrigger we send a packet */ + match->channel = ie->data[0]; + have_channel = 1; + at76_dbg(DBG_RX_BEACON, "%s: CHANNEL - %d", + priv->netdev->name, match->channel); + break; - WARN_ON(priv->tx_skb != NULL); + case MFIE_TYPE_CF_SET: + case MFIE_TYPE_TIM: + case MFIE_TYPE_IBSS_SET: + default: + at76_dbg(DBG_RX_BEACON, "%s: beacon IE id %d len %d %s", + priv->netdev->name, ie->id, ie->len, + hex2str(ie->data, ie->len)); + break; + } - priv->tx_skb = skb; - padding = at76_calc_padding(skb->len); - submit_len = AT76_TX_HDRLEN + skb->len + padding; + /* advance to the next informational element */ + next_ie(&ie); - /* setup 'Atmel' header */ - memset(tx_buffer, 0, sizeof(*tx_buffer)); - tx_buffer->padding = padding; - tx_buffer->wlength = cpu_to_le16(skb->len); - tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value; - if (FIRMWARE_IS_WPA(priv->fw_version) && info->control.hw_key) { - tx_buffer->key_id = (info->control.hw_key->keyidx); - tx_buffer->cipher_type = - priv->keys[info->control.hw_key->keyidx].cipher; - tx_buffer->cipher_length = - priv->keys[info->control.hw_key->keyidx].keylen; - tx_buffer->reserved = 0; - } else { - tx_buffer->key_id = 0; - tx_buffer->cipher_type = 0; - tx_buffer->cipher_length = 0; - tx_buffer->reserved = 0; - }; - /* memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved)); */ - memcpy(tx_buffer->packet, skb->data, skb->len); + /* Optimization: after all, the bdata->data array is + * varpar_len bytes long, whereas we get all of the useful + * information after only ~36 bytes, this saves us a lot of + * time (and trouble as the remaining portion of the array + * could be full of junk) + * Comment this out if you want to see what other information + * comes from the AP - although little of it may be useful */ + } - at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr", - wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength), - tx_buffer->padding, tx_buffer->tx_rate); + at76_dbg(DBG_RX_BEACON, "%s: Finished processing beacon data", + priv->netdev->name); - /* send stuff */ - at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len, - "%s(): tx_buffer %d bytes:", __func__, submit_len); - usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer, - submit_len, at76_mac80211_tx_callback, priv); - ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); - if (ret) { - printk(KERN_ERR "%s: error in tx submit urb: %d\n", - wiphy_name(priv->hw->wiphy), ret); - if (ret == -EINVAL) - printk(KERN_ERR - "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n", - wiphy_name(priv->hw->wiphy), priv->tx_urb, - priv->tx_urb->hcpriv, priv->tx_urb->complete); - } + match->last_rx = jiffies; /* record last rx of beacon */ - return 0; +exit: + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); } -static int at76_mac80211_start(struct ieee80211_hw *hw) +/* Calculate the link level from a given rx_buffer */ +static void at76_calc_level(struct at76_priv *priv, struct at76_rx_buffer *buf, + struct iw_quality *qual) { - struct at76_priv *priv = hw->priv; - int ret; - - at76_dbg(DBG_MAC80211, "%s()", __func__); + /* just a guess for now, might be different for other chips */ + int max_rssi = 42; - mutex_lock(&priv->mtx); - - ret = at76_submit_rx_urb(priv); - if (ret < 0) { - printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - goto error; - } + qual->level = (buf->rssi * 100 / max_rssi); + if (qual->level > 100) + qual->level = 100; + qual->updated |= IW_QUAL_LEVEL_UPDATED; +} - at76_startup_device(priv); +/* Calculate the link quality from a given rx_buffer */ +static void at76_calc_qual(struct at76_priv *priv, struct at76_rx_buffer *buf, + struct iw_quality *qual) +{ + if (at76_is_intersil(priv->board_type)) + qual->qual = buf->link_quality; + else { + unsigned long elapsed; - at76_start_monitor(priv); + /* Update qual at most once a second */ + elapsed = jiffies - priv->beacons_last_qual; + if (elapsed < 1 * HZ) + return; -error: - mutex_unlock(&priv->mtx); + qual->qual = qual->level * priv->beacons_received * + msecs_to_jiffies(priv->beacon_period) / elapsed; - return 0; + priv->beacons_last_qual = jiffies; + priv->beacons_received = 0; + } + qual->qual = (qual->qual > 100) ? 100 : qual->qual; + qual->updated |= IW_QUAL_QUAL_UPDATED; } -static void at76_mac80211_stop(struct ieee80211_hw *hw) +/* Calculate the noise quality from a given rx_buffer */ +static void at76_calc_noise(struct at76_priv *priv, struct at76_rx_buffer *buf, + struct iw_quality *qual) { - struct at76_priv *priv = hw->priv; - - at76_dbg(DBG_MAC80211, "%s()", __func__); - - mutex_lock(&priv->mtx); + qual->noise = 0; + qual->updated |= IW_QUAL_NOISE_INVALID; +} - if (!priv->device_unplugged) { - /* We are called by "ifconfig ethX down", not because the - * device is not available anymore. */ - if (at76_set_radio(priv, 0) == 1) - at76_wait_completion(priv, CMD_RADIO_ON); +static void at76_update_wstats(struct at76_priv *priv, + struct at76_rx_buffer *buf) +{ + struct iw_quality *qual = &priv->wstats.qual; - /* We unlink rx_urb because at76_open() re-submits it. - * If unplugged, at76_delete_device() takes care of it. */ - usb_kill_urb(priv->rx_urb); + if (buf->rssi && priv->mac_state == MAC_CONNECTED) { + qual->updated = 0; + at76_calc_level(priv, buf, qual); + at76_calc_qual(priv, buf, qual); + at76_calc_noise(priv, buf, qual); + } else { + qual->qual = 0; + qual->level = 0; + qual->noise = 0; + qual->updated = IW_QUAL_ALL_INVALID; } - - mutex_unlock(&priv->mtx); } -static int at76_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) +static void at76_rx_mgmt(struct at76_priv *priv, struct at76_rx_buffer *buf) { - struct at76_priv *priv = hw->priv; - int ret = 0; + struct ieee80211_hdr_3addr *mgmt = + (struct ieee80211_hdr_3addr *)buf->packet; + u16 framectl = le16_to_cpu(mgmt->frame_ctl); + + /* update wstats */ + if (priv->mac_state != MAC_INIT && priv->mac_state != MAC_SCANNING) { + /* jal: this is a dirty hack needed by Tim in ad-hoc mode */ + /* Data packets always seem to have a 0 link level, so we + only read link quality info from management packets. + Atmel driver actually averages the present, and previous + values, we just present the raw value at the moment - TJS */ + if (priv->iw_mode == IW_MODE_ADHOC + || (priv->curr_bss + && !compare_ether_addr(mgmt->addr3, + priv->curr_bss->bssid))) + at76_update_wstats(priv, buf); + } - at76_dbg(DBG_MAC80211, "%s()", __func__); + at76_dbg(DBG_RX_MGMT_CONTENT, "%s rx mgmt framectl 0x%x %s", + priv->netdev->name, framectl, + hex2str(mgmt, le16_to_cpu(buf->wlength))); - mutex_lock(&priv->mtx); + switch (framectl & IEEE80211_FCTL_STYPE) { + case IEEE80211_STYPE_BEACON: + case IEEE80211_STYPE_PROBE_RESP: + at76_rx_mgmt_beacon(priv, buf); + break; + + case IEEE80211_STYPE_ASSOC_RESP: + at76_rx_mgmt_assoc(priv, buf); + break; - switch (conf->type) { - case NL80211_IFTYPE_STATION: - priv->iw_mode = IW_MODE_INFRA; + case IEEE80211_STYPE_DISASSOC: + at76_rx_mgmt_disassoc(priv, buf); break; + + case IEEE80211_STYPE_AUTH: + at76_rx_mgmt_auth(priv, buf); + break; + + case IEEE80211_STYPE_DEAUTH: + at76_rx_mgmt_deauth(priv, buf); + break; + default: - ret = -EOPNOTSUPP; - goto exit; + printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n", + priv->netdev->name, framectl); } -exit: - mutex_unlock(&priv->mtx); - - return ret; + return; } -static void at76_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) +/* Convert the 802.11 header into an ethernet-style header, make skb + * ready for consumption by netif_rx() */ +static void at76_ieee80211_to_eth(struct sk_buff *skb, int iw_mode) { - at76_dbg(DBG_MAC80211, "%s()", __func__); -} + struct ieee80211_hdr_3addr *i802_11_hdr; + struct ethhdr *eth_hdr_p; + u8 *src_addr; + u8 *dest_addr; -static int at76_join(struct at76_priv *priv) -{ - struct at76_req_join join; - int ret; + i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data; - memset(&join, 0, sizeof(struct at76_req_join)); - memcpy(join.essid, priv->essid, priv->essid_size); - join.essid_size = priv->essid_size; - memcpy(join.bssid, priv->bssid, ETH_ALEN); - join.bss_type = INFRASTRUCTURE_MODE; - join.channel = priv->channel; - join.timeout = cpu_to_le16(2000); + /* That would be the ethernet header if the hardware converted + * the frame for us. Make sure the source and the destination + * match the 802.11 header. Which hardware does it? */ + eth_hdr_p = (struct ethhdr *)skb_pull(skb, IEEE80211_3ADDR_LEN); - at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__); - ret = at76_set_card_command(priv->udev, CMD_JOIN, &join, - sizeof(struct at76_req_join)); + dest_addr = i802_11_hdr->addr1; + if (iw_mode == IW_MODE_ADHOC) + src_addr = i802_11_hdr->addr2; + else + src_addr = i802_11_hdr->addr3; - if (ret < 0) { - printk(KERN_ERR "%s: at76_set_card_command failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - return 0; - } + if (!compare_ether_addr(eth_hdr_p->h_source, src_addr) && + !compare_ether_addr(eth_hdr_p->h_dest, dest_addr)) + /* Yes, we already have an ethernet header */ + skb_reset_mac_header(skb); + else { + u16 len; + + /* Need to build an ethernet header */ + if (!memcmp(skb->data, snapsig, sizeof(snapsig))) { + /* SNAP frame - decapsulate, keep proto */ + skb_push(skb, offsetof(struct ethhdr, h_proto) - + sizeof(rfc1042sig)); + len = 0; + } else { + /* 802.3 frame, proto is length */ + len = skb->len; + skb_push(skb, ETH_HLEN); + } - ret = at76_wait_completion(priv, CMD_JOIN); - at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret); - if (ret != CMD_STATUS_COMPLETE) { - printk(KERN_ERR "%s: at76_wait_completion failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - return 0; + skb_reset_mac_header(skb); + eth_hdr_p = eth_hdr(skb); + /* This needs to be done in this order (eth_hdr_p->h_dest may + * overlap src_addr) */ + memcpy(eth_hdr_p->h_source, src_addr, ETH_ALEN); + memcpy(eth_hdr_p->h_dest, dest_addr, ETH_ALEN); + if (len) + eth_hdr_p->h_proto = htons(len); } - at76_set_tkip_bssid(priv, priv->bssid); - at76_set_pm_mode(priv); - - return 0; + skb->protocol = eth_type_trans(skb, skb->dev); } -static void at76_dwork_hw_scan(struct work_struct *work) +/* Check for fragmented data in priv->rx_skb. If the packet was no fragment + or it was the last of a fragment set a skb containing the whole packet + is returned for further processing. Otherwise we get NULL and are + done and the packet is either stored inside the fragment buffer + or thrown away. Every returned skb starts with the ieee802_11 header + and contains _no_ FCS at the end */ +static struct sk_buff *at76_check_for_rx_frags(struct at76_priv *priv) { - struct at76_priv *priv = container_of(work, struct at76_priv, - dwork_hw_scan.work); - int ret; + struct sk_buff *skb = priv->rx_skb; + struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data; + struct ieee80211_hdr_3addr *i802_11_hdr = + (struct ieee80211_hdr_3addr *)buf->packet; + /* seq_ctrl, fragment_number, sequence number of new packet */ + u16 sctl = le16_to_cpu(i802_11_hdr->seq_ctl); + u16 fragnr = sctl & 0xf; + u16 seqnr = sctl >> 4; + u16 frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl); - ret = at76_get_cmd_status(priv->udev, CMD_SCAN); - at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret); + /* Length including the IEEE802.11 header, but without the trailing + * FCS and without the Atmel Rx header */ + int length = le16_to_cpu(buf->wlength) - IEEE80211_FCS_LEN; - /* FIXME: add maximum time for scan to complete */ + /* where does the data payload start in skb->data ? */ + u8 *data = i802_11_hdr->payload; - if (ret != CMD_STATUS_COMPLETE) { - queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan, - SCAN_POLL_INTERVAL); - goto exit; + /* length of payload, excl. the trailing FCS */ + int data_len = length - IEEE80211_3ADDR_LEN; + + int i; + struct rx_data_buf *bptr, *optr; + unsigned long oldest = ~0UL; + + at76_dbg(DBG_RX_FRAGS, + "%s: rx data frame_ctl %04x addr2 %s seq/frag %d/%d " + "length %d data %d: %s ...", priv->netdev->name, frame_ctl, + mac2str(i802_11_hdr->addr2), seqnr, fragnr, length, data_len, + hex2str(data, 32)); + + at76_dbg(DBG_RX_FRAGS_SKB, "%s: incoming skb: head %p data %p " + "tail %p end %p len %d", priv->netdev->name, skb->head, + skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), + skb->len); + + if (data_len < 0) { + /* make sure data starts in the buffer */ + printk(KERN_INFO "%s: data frame too short\n", + priv->netdev->name); + return NULL; } - ieee80211_scan_completed(priv->hw); + WARN_ON(length <= AT76_RX_HDRLEN); + if (length <= AT76_RX_HDRLEN) + return NULL; - if (is_valid_ether_addr(priv->bssid)) { - ieee80211_wake_queues(priv->hw); - at76_join(priv); + /* remove the at76_rx_buffer header - we don't need it anymore */ + /* we need the IEEE802.11 header (for the addresses) if this packet + is the first of a chain */ + skb_pull(skb, AT76_RX_HDRLEN); + + /* remove FCS at end */ + skb_trim(skb, length); + + at76_dbg(DBG_RX_FRAGS_SKB, "%s: trimmed skb: head %p data %p tail %p " + "end %p len %d data %p data_len %d", priv->netdev->name, + skb->head, skb->data, skb_tail_pointer(skb), + skb_end_pointer(skb), skb->len, data, data_len); + + if (fragnr == 0 && !(frame_ctl & IEEE80211_FCTL_MOREFRAGS)) { + /* unfragmented packet received */ + /* Use a new skb for the next receive */ + priv->rx_skb = NULL; + at76_dbg(DBG_RX_FRAGS, "%s: unfragmented", priv->netdev->name); + return skb; } - ieee80211_wake_queues(priv->hw); + /* look if we've got a chain for the sender address. + afterwards optr points to first free or the oldest entry, + or, if i < NR_RX_DATA_BUF, bptr points to the entry for the + sender address */ + /* determining the oldest entry doesn't cope with jiffies wrapping + but I don't care to delete a young entry at these rare moments ... */ + + bptr = priv->rx_data; + optr = NULL; + for (i = 0; i < NR_RX_DATA_BUF; i++, bptr++) { + if (!bptr->skb) { + optr = bptr; + oldest = 0UL; + continue; + } -exit: - return; -} + if (!compare_ether_addr(i802_11_hdr->addr2, bptr->sender)) + break; -static int at76_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) -{ - struct at76_priv *priv = hw->priv; - struct at76_req_scan scan; - int ret; + if (!optr) { + optr = bptr; + oldest = bptr->last_rx; + } else if (bptr->last_rx < oldest) + optr = bptr; + } - at76_dbg(DBG_MAC80211, "%s():", __func__); - at76_dbg_dump(DBG_MAC80211, ssid, len, "ssid %zd bytes:", len); + if (i < NR_RX_DATA_BUF) { + + at76_dbg(DBG_RX_FRAGS, "%s: %d. cacheentry (seq/frag = %d/%d) " + "matched sender addr", + priv->netdev->name, i, bptr->seqnr, bptr->fragnr); + + /* bptr points to an entry for the sender address */ + if (bptr->seqnr == seqnr) { + int left; + /* the fragment has the current sequence number */ + if (((bptr->fragnr + 1) & 0xf) != fragnr) { + /* wrong fragment number -> ignore it */ + /* is & 0xf necessary above ??? */ + at76_dbg(DBG_RX_FRAGS, + "%s: frag nr mismatch: %d + 1 != %d", + priv->netdev->name, bptr->fragnr, + fragnr); + return NULL; + } + bptr->last_rx = jiffies; + /* the next following fragment number -> + add the data at the end */ + + /* for test only ??? */ + left = skb_tailroom(bptr->skb); + if (left < data_len) + printk(KERN_INFO + "%s: only %d byte free (need %d)\n", + priv->netdev->name, left, data_len); + else + memcpy(skb_put(bptr->skb, data_len), data, + data_len); + + bptr->fragnr = fragnr; + if (frame_ctl & IEEE80211_FCTL_MOREFRAGS) + return NULL; + + /* this was the last fragment - send it */ + skb = bptr->skb; + bptr->skb = NULL; /* free the entry */ + at76_dbg(DBG_RX_FRAGS, "%s: last frag of seq %d", + priv->netdev->name, seqnr); + return skb; + } - mutex_lock(&priv->mtx); + /* got another sequence number */ + if (fragnr == 0) { + /* it's the start of a new chain - replace the + old one by this */ + /* bptr->sender has the correct value already */ + at76_dbg(DBG_RX_FRAGS, + "%s: start of new seq %d, removing old seq %d", + priv->netdev->name, seqnr, bptr->seqnr); + bptr->seqnr = seqnr; + bptr->fragnr = 0; + bptr->last_rx = jiffies; + /* swap bptr->skb and priv->rx_skb */ + skb = bptr->skb; + bptr->skb = priv->rx_skb; + priv->rx_skb = skb; + } else { + /* it from the middle of a new chain -> + delete the old entry and skip the new one */ + at76_dbg(DBG_RX_FRAGS, + "%s: middle of new seq %d (%d) " + "removing old seq %d", + priv->netdev->name, seqnr, fragnr, + bptr->seqnr); + dev_kfree_skb(bptr->skb); + bptr->skb = NULL; + } + return NULL; + } - ieee80211_stop_queues(hw); + /* if we didn't find a chain for the sender address, optr + points either to the first free or the oldest entry */ - memset(&scan, 0, sizeof(struct at76_req_scan)); - memset(scan.bssid, 0xFF, ETH_ALEN); - scan.scan_type = SCAN_TYPE_ACTIVE; - if (priv->essid_size > 0) { - memcpy(scan.essid, ssid, len); - scan.essid_size = len; + if (fragnr != 0) { + /* this is not the begin of a fragment chain ... */ + at76_dbg(DBG_RX_FRAGS, + "%s: no chain for non-first fragment (%d)", + priv->netdev->name, fragnr); + return NULL; } - scan.min_channel_time = cpu_to_le16(priv->scan_min_time); - scan.max_channel_time = cpu_to_le16(priv->scan_max_time); - scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000); - scan.international_scan = 0; - at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__); - ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); + BUG_ON(!optr); + if (optr->skb) { + /* swap the skb's */ + skb = optr->skb; + optr->skb = priv->rx_skb; + priv->rx_skb = skb; - if (ret < 0) { - err("CMD_SCAN failed: %d", ret); - goto exit; - } + at76_dbg(DBG_RX_FRAGS, + "%s: free old contents: sender %s seq/frag %d/%d", + priv->netdev->name, mac2str(optr->sender), + optr->seqnr, optr->fragnr); - queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan, - SCAN_POLL_INTERVAL); + } else { + /* take the skb from priv->rx_skb */ + optr->skb = priv->rx_skb; + /* let at76_submit_rx_urb() allocate a new skb */ + priv->rx_skb = NULL; -exit: - mutex_unlock(&priv->mtx); + at76_dbg(DBG_RX_FRAGS, "%s: use a free entry", + priv->netdev->name); + } + memcpy(optr->sender, i802_11_hdr->addr2, ETH_ALEN); + optr->seqnr = seqnr; + optr->fragnr = 0; + optr->last_rx = jiffies; - return 0; + return NULL; } -static int at76_config(struct ieee80211_hw *hw, u32 changed) +/* Rx interrupt: we expect the complete data buffer in priv->rx_skb */ +static void at76_rx_data(struct at76_priv *priv) { - struct at76_priv *priv = hw->priv; - struct ieee80211_conf *conf = &hw->conf; + struct net_device *netdev = priv->netdev; + struct net_device_stats *stats = &priv->stats; + struct sk_buff *skb = priv->rx_skb; + struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data; + struct ieee80211_hdr_3addr *i802_11_hdr; + int length = le16_to_cpu(buf->wlength); - at76_dbg(DBG_MAC80211, "%s(): channel %d radio %d", - __func__, conf->channel->hw_value, conf->radio_enabled); - at76_dbg_dump(DBG_MAC80211, priv->essid, priv->essid_size, "ssid:"); - at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:"); + at76_dbg(DBG_RX_DATA, "%s received data packet: %s", netdev->name, + hex2str(skb->data, AT76_RX_HDRLEN)); - mutex_lock(&priv->mtx); + at76_dbg(DBG_RX_DATA_CONTENT, "rx packet: %s", + hex2str(skb->data + AT76_RX_HDRLEN, length)); - priv->channel = conf->channel->hw_value; + skb = at76_check_for_rx_frags(priv); + if (!skb) + return; - if (is_valid_ether_addr(priv->bssid)) { - at76_join(priv); - ieee80211_wake_queues(priv->hw); - } else { - ieee80211_stop_queues(priv->hw); - at76_start_monitor(priv); - }; + /* Atmel header and the FCS are already removed */ + i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data; - mutex_unlock(&priv->mtx); + skb->dev = netdev; + skb->ip_summed = CHECKSUM_NONE; /* TODO: should check CRC */ - return 0; -} + if (is_broadcast_ether_addr(i802_11_hdr->addr1)) { + if (!compare_ether_addr(i802_11_hdr->addr1, netdev->broadcast)) + skb->pkt_type = PACKET_BROADCAST; + else + skb->pkt_type = PACKET_MULTICAST; + } else if (compare_ether_addr(i802_11_hdr->addr1, netdev->dev_addr)) + skb->pkt_type = PACKET_OTHERHOST; -static int at76_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct at76_priv *priv = hw->priv; + at76_ieee80211_to_eth(skb, priv->iw_mode); - at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:"); + netdev->last_rx = jiffies; + netif_rx(skb); + stats->rx_packets++; + stats->rx_bytes += length; - mutex_lock(&priv->mtx); + return; +} - memcpy(priv->bssid, conf->bssid, ETH_ALEN); -// memcpy(priv->essid, conf->ssid, conf->ssid_len); -// priv->essid_size = conf->ssid_len; +static void at76_rx_monitor_mode(struct at76_priv *priv) +{ + struct at76_rx_radiotap *rt; + u8 *payload; + int skblen; + struct net_device *netdev = priv->netdev; + struct at76_rx_buffer *buf = + (struct at76_rx_buffer *)priv->rx_skb->data; + /* length including the IEEE802.11 header and the trailing FCS, + but not at76_rx_buffer */ + int length = le16_to_cpu(buf->wlength); + struct sk_buff *skb = priv->rx_skb; + struct net_device_stats *stats = &priv->stats; - if (is_valid_ether_addr(priv->bssid)) { - /* mac80211 is joining a bss */ - ieee80211_wake_queues(priv->hw); - at76_join(priv); - } else - ieee80211_stop_queues(priv->hw); + if (length < IEEE80211_FCS_LEN) { + /* buffer contains no data */ + at76_dbg(DBG_MONITOR_MODE, + "%s: MONITOR MODE: rx skb without data", + priv->netdev->name); + return; + } - mutex_unlock(&priv->mtx); + skblen = sizeof(struct at76_rx_radiotap) + length; - return 0; + skb = dev_alloc_skb(skblen); + if (!skb) { + printk(KERN_ERR "%s: MONITOR MODE: dev_alloc_skb for radiotap " + "header returned NULL\n", priv->netdev->name); + return; + } + + skb_put(skb, skblen); + + rt = (struct at76_rx_radiotap *)skb->data; + payload = skb->data + sizeof(struct at76_rx_radiotap); + + rt->rt_hdr.it_version = 0; + rt->rt_hdr.it_pad = 0; + rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct at76_rx_radiotap)); + rt->rt_hdr.it_present = cpu_to_le32(AT76_RX_RADIOTAP_PRESENT); + + rt->rt_tsft = cpu_to_le64(le32_to_cpu(buf->rx_time)); + rt->rt_rate = hw_rates[buf->rx_rate] & (~0x80); + rt->rt_signal = buf->rssi; + rt->rt_noise = buf->noise_level; + rt->rt_flags = IEEE80211_RADIOTAP_F_FCS; + if (buf->fragmentation) + rt->rt_flags |= IEEE80211_RADIOTAP_F_FRAG; + + memcpy(payload, buf->packet, length); + skb->dev = netdev; + skb->ip_summed = CHECKSUM_NONE; + skb_reset_mac_header(skb); + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = htons(ETH_P_802_2); + + netdev->last_rx = jiffies; + netif_rx(skb); + stats->rx_packets++; + stats->rx_bytes += length; } -/* must be atomic */ -static void at76_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, int mc_count, - struct dev_addr_list *mc_list) +/* Check if we spy on the sender address in buf and update stats */ +static void at76_iwspy_update(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - struct at76_priv *priv = hw->priv; - int flags; - - at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x " - "total_flags=0x%08x mc_count=%d", - __func__, changed_flags, *total_flags, mc_count); + struct ieee80211_hdr_3addr *hdr = + (struct ieee80211_hdr_3addr *)buf->packet; + struct iw_quality qual; - flags = changed_flags & AT76_SUPPORTED_FILTERS; - *total_flags = AT76_SUPPORTED_FILTERS; + /* We can only set the level here */ + qual.updated = IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID; + qual.level = 0; + qual.noise = 0; + at76_calc_level(priv, buf, &qual); - /* FIXME: access to priv->promisc should be protected with - * priv->mtx, but it's impossible because this function needs to be - * atomic */ + spin_lock_bh(&priv->spy_spinlock); - if (flags && !priv->promisc) { - /* mac80211 wants us to enable promiscuous mode */ - priv->promisc = 1; - } else if (!flags && priv->promisc) { - /* we need to disable promiscuous mode */ - priv->promisc = 0; - } else - return; + if (priv->spy_data.spy_number > 0) + wireless_spy_update(priv->netdev, hdr->addr2, &qual); - queue_work(hw->workqueue, &priv->work_set_promisc); + spin_unlock_bh(&priv->spy_spinlock); } -static int at76_set_key_oldfw(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, - struct ieee80211_key_conf *key) +static void at76_rx_tasklet(unsigned long param) { - struct at76_priv *priv = hw->priv; - - int i; - - at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d " - "key->keylen %d", - __func__, cmd, key->alg, key->keyidx, key->keylen); + struct urb *urb = (struct urb *)param; + struct at76_priv *priv = urb->context; + struct net_device *netdev = priv->netdev; + struct at76_rx_buffer *buf; + struct ieee80211_hdr_3addr *i802_11_hdr; + u16 frame_ctl; - if (key->alg != ALG_WEP) - return -EOPNOTSUPP; + if (priv->device_unplugged) { + at76_dbg(DBG_DEVSTART, "device unplugged"); + if (urb) + at76_dbg(DBG_DEVSTART, "urb status %d", urb->status); + return; + } - key->hw_key_idx = key->keyidx; + if (!priv->rx_skb || !netdev || !priv->rx_skb->data) + return; - mutex_lock(&priv->mtx); + buf = (struct at76_rx_buffer *)priv->rx_skb->data; - switch (cmd) { - case SET_KEY: - memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen); - priv->wep_keys_len[key->keyidx] = key->keylen; + i802_11_hdr = (struct ieee80211_hdr_3addr *)buf->packet; - /* FIXME: find out how to do this properly */ - priv->wep_key_id = key->keyidx; + frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl); - break; - case DISABLE_KEY: - default: - priv->wep_keys_len[key->keyidx] = 0; - break; + if (urb->status != 0) { + if (urb->status != -ENOENT && urb->status != -ECONNRESET) + at76_dbg(DBG_URB, + "%s %s: - nonzero Rx bulk status received: %d", + __func__, netdev->name, urb->status); + return; } - priv->wep_enabled = 0; + at76_dbg(DBG_RX_ATMEL_HDR, + "%s: rx frame: rate %d rssi %d noise %d link %d %s", + priv->netdev->name, buf->rx_rate, buf->rssi, buf->noise_level, + buf->link_quality, hex2str(i802_11_hdr, 48)); + if (priv->iw_mode == IW_MODE_MONITOR) { + at76_rx_monitor_mode(priv); + goto exit; + } - for (i = 0; i < WEP_KEYS; i++) { - if (priv->wep_keys_len[i] != 0) - priv->wep_enabled = 1; + /* there is a new bssid around, accept it: */ + if (buf->newbss && priv->iw_mode == IW_MODE_ADHOC) { + at76_dbg(DBG_PROGRESS, "%s: rx newbss", netdev->name); + schedule_work(&priv->work_new_bss); } - at76_startup_device(priv); + switch (frame_ctl & IEEE80211_FCTL_FTYPE) { + case IEEE80211_FTYPE_DATA: + at76_rx_data(priv); + break; - mutex_unlock(&priv->mtx); + case IEEE80211_FTYPE_MGMT: + /* jal: TODO: find out if we can update iwspy also on + other frames than management (might depend on the + radio chip / firmware version !) */ - return 0; -} + at76_iwspy_update(priv, buf); -static int at76_set_key_newfw(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, - struct ieee80211_key_conf *key) -{ - struct at76_priv *priv = hw->priv; - int ret = -EOPNOTSUPP; - - at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d " - "key->keylen %d", - __func__, cmd, key->alg, key->keyidx, key->keylen); + at76_rx_mgmt(priv, buf); + break; - mutex_lock(&priv->mtx); + case IEEE80211_FTYPE_CTL: + at76_dbg(DBG_RX_CTRL, "%s: ignored ctrl frame: %04x", + priv->netdev->name, frame_ctl); + break; - priv->mib_buf.type = MIB_MAC_ENCRYPTION; + default: + printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n", + priv->netdev->name, frame_ctl); + } +exit: + at76_submit_rx_urb(priv); +} - if (cmd == DISABLE_KEY) { - priv->mib_buf.size = CIPHER_KEY_LEN; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - cipher_default_keyvalue[key->keyidx]); - memset(priv->mib_buf.data.data, 0, CIPHER_KEY_LEN); - if (at76_set_mib(priv, &priv->mib_buf) != CMD_STATUS_COMPLETE) - ret = -EOPNOTSUPP; /* -EIO would be probably better */ - else { +/* Load firmware into kernel memory and parse it */ +static struct fwentry *at76_load_firmware(struct usb_device *udev, + enum board_type board_type) +{ + int ret; + char *str; + struct at76_fw_header *fwh; + struct fwentry *fwe = &firmwares[board_type]; - priv->keys[key->keyidx].cipher = CIPHER_NONE; - priv->keys[key->keyidx].keylen = 0; - }; - if (priv->default_group_key == key->keyidx) - priv->default_group_key = 0xff; + mutex_lock(&fw_mutex); - if (priv->default_pairwise_key == key->keyidx) - priv->default_pairwise_key = 0xff; - /* If default pairwise key is removed, fall back to - * group key? */ - ret = 0; + if (fwe->loaded) { + at76_dbg(DBG_FW, "re-using previously loaded fw"); goto exit; - }; - - if (cmd == SET_KEY) { - /* store key into MIB */ - priv->mib_buf.size = CIPHER_KEY_LEN; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - cipher_default_keyvalue[key->keyidx]); - memset(priv->mib_buf.data.data, 0, CIPHER_KEY_LEN); - memcpy(priv->mib_buf.data.data, key->key, key->keylen); - - switch (key->alg) { - case ALG_WEP: - if (key->keylen == 5) { - priv->keys[key->keyidx].cipher = - CIPHER_WEP64; - priv->keys[key->keyidx].keylen = 8; - } else if (key->keylen == 13) { - priv->keys[key->keyidx].cipher = - CIPHER_WEP128; - /* Firmware needs this */ - priv->keys[key->keyidx].keylen = 8; - } else { - ret = -EOPNOTSUPP; - goto exit; - }; - break; - case ALG_TKIP: - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - priv->keys[key->keyidx].cipher = CIPHER_TKIP; - priv->keys[key->keyidx].keylen = 12; - break; + } - case ALG_CCMP: - if (!at76_is_505a(priv->board_type)) { - ret = -EOPNOTSUPP; - goto exit; - }; - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - priv->keys[key->keyidx].cipher = CIPHER_CCMP; - priv->keys[key->keyidx].keylen = 16; - break; + at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname); + ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev); + if (ret < 0) { + dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n", + fwe->fwname); + dev_printk(KERN_ERR, &udev->dev, + "you may need to download the firmware from " + "http://developer.berlios.de/projects/at76c503a/"); + goto exit; + } - default: - ret = -EOPNOTSUPP; - goto exit; - }; - - priv->mib_buf.data.data[38] = priv->keys[key->keyidx].cipher; - priv->mib_buf.data.data[39] = 1; /* Taken from atmelwlandriver, - not documented */ - - if (is_valid_ether_addr(address)) - /* Pairwise key */ - priv->mib_buf.data.data[39] |= (KEY_PAIRWISE | KEY_TX); - else if (is_broadcast_ether_addr(address)) - /* Group key */ - priv->mib_buf.data.data[39] |= (KEY_TX); - else /* Key used only for transmission ??? */ - priv->mib_buf.data.data[39] |= (KEY_TX); - - if (at76_set_mib(priv, &priv->mib_buf) != - CMD_STATUS_COMPLETE) { - ret = -EOPNOTSUPP; /* -EIO would be probably better */ - goto exit; - }; + at76_dbg(DBG_FW, "got it."); + fwh = (struct at76_fw_header *)(fwe->fw->data); - if ((key->alg == ALG_TKIP) || (key->alg == ALG_CCMP)) - at76_reset_rsc(priv); + if (fwe->fw->size <= sizeof(*fwh)) { + dev_printk(KERN_ERR, &udev->dev, + "firmware is too short (0x%zx)\n", fwe->fw->size); + goto exit; + } - key->hw_key_idx = key->keyidx; + /* CRC currently not checked */ + fwe->board_type = le32_to_cpu(fwh->board_type); + if (fwe->board_type != board_type) { + dev_printk(KERN_ERR, &udev->dev, + "board type mismatch, requested %u, got %u\n", + board_type, fwe->board_type); + goto exit; + } - /* Set up default keys */ - if (is_broadcast_ether_addr(address)) - priv->default_group_key = key->keyidx; - if (is_valid_ether_addr(address)) - priv->default_pairwise_key = key->keyidx; + fwe->fw_version.major = fwh->major; + fwe->fw_version.minor = fwh->minor; + fwe->fw_version.patch = fwh->patch; + fwe->fw_version.build = fwh->build; - /* Set up encryption MIBs */ + str = (char *)fwh + le32_to_cpu(fwh->str_offset); + fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset); + fwe->intfw_size = le32_to_cpu(fwh->int_fw_len); + fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset); + fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len); - /* first block of settings */ - priv->mib_buf.size = 3; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - privacy_invoked); - priv->mib_buf.data.data[0] = 1; /* privacy_invoked */ - priv->mib_buf.data.data[1] = priv->default_pairwise_key; - priv->mib_buf.data.data[2] = priv->default_group_key; + fwe->loaded = 1; - ret = at76_set_mib(priv, &priv->mib_buf); - if (ret != CMD_STATUS_COMPLETE) - goto exit; + dev_printk(KERN_DEBUG, &udev->dev, + "using firmware %s (version %d.%d.%d-%d)\n", + fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build); - /* second block of settings */ - priv->mib_buf.size = 3; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - exclude_unencrypted); - priv->mib_buf.data.data[0] = 1; /* exclude_unencrypted */ - priv->mib_buf.data.data[1] = 0; /* wep_encryption_type */ - priv->mib_buf.data.data[2] = 0; /* ckip_key_permutation */ + at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type, + le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len), + le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len)); + at76_dbg(DBG_DEVSTART, "firmware id %s", str); - ret = at76_set_mib(priv, &priv->mib_buf); - if (ret != CMD_STATUS_COMPLETE) - goto exit; - ret = 0; - }; exit: - at76_dump_mib_mac_encryption(priv); - mutex_unlock(&priv->mtx); - return ret; -} - -static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, - struct ieee80211_key_conf *key) -{ - struct at76_priv *priv = hw->priv; - - at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d " - "key->keylen %d", - __func__, cmd, key->alg, key->keyidx, key->keylen); + mutex_unlock(&fw_mutex); - if (FIRMWARE_IS_WPA(priv->fw_version)) - return at76_set_key_newfw(hw, cmd, local_address, address, key); + if (fwe->loaded) + return fwe; else - return at76_set_key_oldfw(hw, cmd, local_address, address, key); - + return NULL; } -static const struct ieee80211_ops at76_ops = { - .tx = at76_mac80211_tx, - .add_interface = at76_add_interface, - .remove_interface = at76_remove_interface, - .config = at76_config, - .config_interface = at76_config_interface, - .configure_filter = at76_configure_filter, - .start = at76_mac80211_start, - .stop = at76_mac80211_stop, - .hw_scan = at76_hw_scan, - .set_key = at76_set_key, -}; - /* Allocate network device and initialize private data */ static struct at76_priv *at76_alloc_new_device(struct usb_device *udev) { - struct ieee80211_hw *hw; + struct net_device *netdev; struct at76_priv *priv; + int i; - hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops); - if (!hw) { - printk(KERN_ERR DRIVER_NAME ": could not register" - " ieee80211_hw\n"); + /* allocate memory for our device state and initialize it */ + netdev = alloc_etherdev(sizeof(struct at76_priv)); + if (!netdev) { + dev_printk(KERN_ERR, &udev->dev, "out of memory\n"); return NULL; } - priv = hw->priv; - priv->hw = hw; + priv = netdev_priv(netdev); priv->udev = udev; + priv->netdev = netdev; mutex_init(&priv->mtx); + INIT_WORK(&priv->work_assoc_done, at76_work_assoc_done); + INIT_WORK(&priv->work_join, at76_work_join); + INIT_WORK(&priv->work_new_bss, at76_work_new_bss); + INIT_WORK(&priv->work_start_scan, at76_work_start_scan); INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc); INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx); - INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan); + INIT_DELAYED_WORK(&priv->dwork_restart, at76_dwork_restart); + INIT_DELAYED_WORK(&priv->dwork_get_scan, at76_dwork_get_scan); + INIT_DELAYED_WORK(&priv->dwork_beacon, at76_dwork_beacon); + INIT_DELAYED_WORK(&priv->dwork_auth, at76_dwork_auth); + INIT_DELAYED_WORK(&priv->dwork_assoc, at76_dwork_assoc); + + spin_lock_init(&priv->mgmt_spinlock); + priv->next_mgmt_bulk = NULL; + priv->mac_state = MAC_INIT; + + /* initialize empty BSS list */ + priv->curr_bss = NULL; + INIT_LIST_HEAD(&priv->bss_list); + spin_lock_init(&priv->bss_list_spinlock); + + init_timer(&priv->bss_list_timer); + priv->bss_list_timer.data = (unsigned long)priv; + priv->bss_list_timer.function = at76_bss_list_timeout; + + spin_lock_init(&priv->spy_spinlock); + + /* mark all rx data entries as unused */ + for (i = 0; i < NR_RX_DATA_BUF; i++) + priv->rx_data[i].skb = NULL; priv->rx_tasklet.func = at76_rx_tasklet; priv->rx_tasklet.data = 0; @@ -2371,9 +5197,6 @@ static struct at76_priv *at76_alloc_new_device(struct usb_device *udev) priv->pm_mode = AT76_PM_OFF; priv->pm_period = 0; - /* unit us */ - priv->hw->channel_change_time = 100000; - return priv; } @@ -2436,42 +5259,11 @@ static int at76_alloc_urbs(struct at76_priv *priv, return 0; } -static struct ieee80211_rate at76_rates[] = { - { .bitrate = 10, .hw_value = TX_RATE_1MBIT, }, - { .bitrate = 20, .hw_value = TX_RATE_2MBIT, }, - { .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, }, - { .bitrate = 110, .hw_value = TX_RATE_11MBIT, }, -}; - -static struct ieee80211_channel at76_channels[] = { - { .center_freq = 2412, .hw_value = 1 }, - { .center_freq = 2417, .hw_value = 2 }, - { .center_freq = 2422, .hw_value = 3 }, - { .center_freq = 2427, .hw_value = 4 }, - { .center_freq = 2432, .hw_value = 5 }, - { .center_freq = 2437, .hw_value = 6 }, - { .center_freq = 2442, .hw_value = 7 }, - { .center_freq = 2447, .hw_value = 8 }, - { .center_freq = 2452, .hw_value = 9 }, - { .center_freq = 2457, .hw_value = 10 }, - { .center_freq = 2462, .hw_value = 11 }, - { .center_freq = 2467, .hw_value = 12 }, - { .center_freq = 2472, .hw_value = 13 }, - { .center_freq = 2484, .hw_value = 14 } -}; - -static struct ieee80211_supported_band at76_supported_band = { - .channels = at76_channels, - .n_channels = ARRAY_SIZE(at76_channels), - .bitrates = at76_rates, - .n_bitrates = ARRAY_SIZE(at76_rates), -}; - /* Register network device and initialize the hardware */ static int at76_init_new_device(struct at76_priv *priv, struct usb_interface *interface) { - struct device *dev = &interface->dev; + struct net_device *netdev = priv->netdev; int ret; /* set up the endpoint information */ @@ -2487,11 +5279,14 @@ static int at76_init_new_device(struct at76_priv *priv, /* MAC address */ ret = at76_get_hw_config(priv); if (ret < 0) { - dev_err(dev, "cannot get MAC address\n"); + dev_printk(KERN_ERR, &interface->dev, + "cannot get MAC address\n"); goto exit; } priv->domain = at76_get_reg_domain(priv->regulatory_domain); + /* init. netdev->dev_addr */ + memcpy(netdev->dev_addr, priv->mac_addr, ETH_ALEN); priv->channel = DEF_CHANNEL; priv->iw_mode = IW_MODE_INFRA; @@ -2501,54 +5296,47 @@ static int at76_init_new_device(struct at76_priv *priv, priv->txrate = TX_RATE_AUTO; priv->preamble_type = PREAMBLE_TYPE_LONG; priv->beacon_period = 100; + priv->beacons_last_qual = jiffies; priv->auth_mode = WLAN_AUTH_OPEN; priv->scan_min_time = DEF_SCAN_MIN_TIME; priv->scan_max_time = DEF_SCAN_MAX_TIME; priv->scan_mode = SCAN_TYPE_ACTIVE; - priv->default_pairwise_key = 0xff; - priv->default_group_key = 0xff; - - /* mac80211 initialisation */ - priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &at76_supported_band; - if (FIRMWARE_IS_WPA(priv->fw_version) && - (at76_is_503rfmd(priv->board_type) || - at76_is_505(priv->board_type))) - priv->hw->flags = IEEE80211_HW_SIGNAL_UNSPEC; - else - priv->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_UNSPEC; - - priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); - - SET_IEEE80211_DEV(priv->hw, &interface->dev); - SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); - - ret = ieee80211_register_hw(priv->hw); + netdev->flags &= ~IFF_MULTICAST; /* not yet or never */ + netdev->open = at76_open; + netdev->stop = at76_stop; + netdev->get_stats = at76_get_stats; + netdev->ethtool_ops = &at76_ethtool_ops; + + /* Add pointers to enable iwspy support. */ + priv->wireless_data.spy_data = &priv->spy_data; + netdev->wireless_data = &priv->wireless_data; + + netdev->hard_start_xmit = at76_tx; + netdev->tx_timeout = at76_tx_timeout; + netdev->watchdog_timeo = 2 * HZ; + netdev->wireless_handlers = &at76_handler_def; + netdev->set_multicast_list = at76_set_multicast; + netdev->set_mac_address = at76_set_mac_address; + dev_alloc_name(netdev, "wlan%d"); + + ret = register_netdev(priv->netdev); if (ret) { - dev_err(dev, "cannot register mac80211 hw (status %d)!\n", ret); + dev_printk(KERN_ERR, &interface->dev, + "cannot register netdevice (status %d)!\n", ret); goto exit; } + priv->netdev_registered = 1; - priv->mac80211_registered = 1; + printk(KERN_INFO "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n", + netdev->name, dev_name(&interface->dev), mac2str(priv->mac_addr), + priv->fw_version.major, priv->fw_version.minor, + priv->fw_version.patch, priv->fw_version.build); + printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n", netdev->name, + priv->regulatory_domain, priv->domain->name); - dev_info(dev, "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n", - wiphy_name(priv->hw->wiphy), - dev_name(&interface->dev), mac2str(priv->mac_addr), - priv->fw_version.major, priv->fw_version.minor, - priv->fw_version.patch, priv->fw_version.build); - dev_info(dev, "%s: regulatory domain 0x%02x: %s\n", - wiphy_name(priv->hw->wiphy), - priv->regulatory_domain, priv->domain->name); - dev_info(dev, "%s: WPA support: ", wiphy_name(priv->hw->wiphy)); - if (!FIRMWARE_IS_WPA(priv->fw_version)) - printk("none\n"); - else { - if (!at76_is_505a(priv->board_type)) - printk("TKIP\n"); - else - printk("TKIP, AES/CCMP\n"); - }; + /* we let this timer run the whole time this driver instance lives */ + mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT); exit: return ret; @@ -2556,13 +5344,15 @@ exit: static void at76_delete_device(struct at76_priv *priv) { + int i; + at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__); /* The device is gone, don't bother turning it off */ priv->device_unplugged = 1; - if (priv->mac80211_registered) - ieee80211_unregister_hw(priv->hw); + if (priv->netdev_registered) + unregister_netdev(priv->netdev); /* assuming we used keventd, it must quiesce too */ flush_scheduled_work(); @@ -2583,11 +5373,25 @@ static void at76_delete_device(struct at76_priv *priv) if (priv->rx_skb) kfree_skb(priv->rx_skb); + at76_free_bss_list(priv); + del_timer_sync(&priv->bss_list_timer); + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + + if (priv->mac_state == MAC_CONNECTED) + at76_iwevent_bss_disconnect(priv->netdev); + + for (i = 0; i < NR_RX_DATA_BUF; i++) + if (priv->rx_data[i].skb) { + dev_kfree_skb(priv->rx_data[i].skb); + priv->rx_data[i].skb = NULL; + } usb_put_dev(priv->udev); - at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw", - __func__); - ieee80211_free_hw(priv->hw); + at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/netdev", __func__); + free_netdev(priv->netdev); /* priv is in netdev */ at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__); } @@ -2621,8 +5425,8 @@ static int at76_probe(struct usb_interface *interface, we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */ if (op_mode == OPMODE_HW_CONFIG_MODE) { - dev_err(&interface->dev, - "cannot handle a device in HW_CONFIG_MODE\n"); + dev_printk(KERN_ERR, &interface->dev, + "cannot handle a device in HW_CONFIG_MODE\n"); ret = -EBUSY; goto error; } @@ -2630,12 +5434,13 @@ static int at76_probe(struct usb_interface *interface, if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) { /* download internal firmware part */ - dev_dbg(&interface->dev, "downloading internal firmware\n"); + dev_printk(KERN_DEBUG, &interface->dev, + "downloading internal firmware\n"); ret = at76_load_internal_fw(udev, fwe); if (ret < 0) { - dev_err(&interface->dev, - "error %d downloading internal firmware\n", - ret); + dev_printk(KERN_ERR, &interface->dev, + "error %d downloading internal firmware\n", + ret); goto error; } usb_put_dev(udev); @@ -2660,7 +5465,8 @@ static int at76_probe(struct usb_interface *interface, need_ext_fw = 1; if (need_ext_fw) { - dev_dbg(&interface->dev, "downloading external firmware\n"); + dev_printk(KERN_DEBUG, &interface->dev, + "downloading external firmware\n"); ret = at76_load_external_fw(udev, fwe); if (ret) @@ -2669,8 +5475,8 @@ static int at76_probe(struct usb_interface *interface, /* Re-check firmware version */ ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv)); if (ret < 0) { - dev_err(&interface->dev, - "error %d getting firmware version\n", ret); + dev_printk(KERN_ERR, &interface->dev, + "error %d getting firmware version\n", ret); goto error; } } @@ -2681,6 +5487,7 @@ static int at76_probe(struct usb_interface *interface, goto error; } + SET_NETDEV_DEV(priv->netdev, &interface->dev); usb_set_intfdata(interface, priv); memcpy(&priv->fw_version, &fwv, sizeof(struct mib_fw_version)); @@ -2708,7 +5515,7 @@ static void at76_disconnect(struct usb_interface *interface) if (!priv) return; - printk(KERN_INFO "%s: disconnecting\n", wiphy_name(priv->hw->wiphy)); + printk(KERN_INFO "%s: disconnecting\n", priv->netdev->name); at76_delete_device(priv); dev_printk(KERN_INFO, &interface->dev, "disconnected\n"); } @@ -2764,8 +5571,5 @@ MODULE_AUTHOR("Alex <alex@foogod.com>"); MODULE_AUTHOR("Nick Jones"); MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@hotmail.com>"); MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"); -MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>"); -MODULE_AUTHOR("Kalle Valo <kalle.valo@iki.fi>"); -MODULE_AUTHOR("Milan Plzik <milan.plzik@gmail.com>"); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/at76_usb/at76_usb.h b/drivers/staging/at76_usb/at76_usb.h index 8bb352f..b20be9d 100644 --- a/drivers/staging/at76_usb/at76_usb.h +++ b/drivers/staging/at76_usb/at76_usb.h @@ -34,6 +34,23 @@ enum board_type { BOARD_505AMX = 8 }; +/* our private ioctl's */ +/* preamble length (0 - long, 1 - short, 2 - auto) */ +#define AT76_SET_SHORT_PREAMBLE (SIOCIWFIRSTPRIV + 0) +#define AT76_GET_SHORT_PREAMBLE (SIOCIWFIRSTPRIV + 1) +/* which debug channels are enabled */ +#define AT76_SET_DEBUG (SIOCIWFIRSTPRIV + 2) +#define AT76_GET_DEBUG (SIOCIWFIRSTPRIV + 3) +/* power save mode (incl. the Atmel proprietary smart save mode) */ +#define AT76_SET_POWERSAVE_MODE (SIOCIWFIRSTPRIV + 4) +#define AT76_GET_POWERSAVE_MODE (SIOCIWFIRSTPRIV + 5) +/* min and max channel times for scan */ +#define AT76_SET_SCAN_TIMES (SIOCIWFIRSTPRIV + 6) +#define AT76_GET_SCAN_TIMES (SIOCIWFIRSTPRIV + 7) +/* scan mode (0 - active, 1 - passive) */ +#define AT76_SET_SCAN_MODE (SIOCIWFIRSTPRIV + 8) +#define AT76_GET_SCAN_MODE (SIOCIWFIRSTPRIV + 9) + #define CMD_STATUS_IDLE 0x00 #define CMD_STATUS_COMPLETE 0x01 #define CMD_STATUS_UNKNOWN 0x02 @@ -65,7 +82,6 @@ enum board_type { #define MIB_MAC 0x03 #define MIB_MAC_MGMT 0x05 #define MIB_MAC_WEP 0x06 -#define MIB_MAC_ENCRYPTION 0x06 #define MIB_PHY 0x07 #define MIB_FW_VERSION 0x08 #define MIB_MDOMAIN 0x09 @@ -90,26 +106,6 @@ enum board_type { #define AT76_PM_ON 2 #define AT76_PM_SMART 3 -/* cipher values for encryption keys */ -#define CIPHER_NONE 0 /* this value is only guessed */ -#define CIPHER_WEP64 1 -#define CIPHER_TKIP 2 -#define CIPHER_CCMP 3 -#define CIPHER_CCX 4 /* for consistency sake only */ -#define CIPHER_WEP128 5 - -/* bit flags key types for encryption keys */ -#define KEY_PAIRWISE 2 -#define KEY_TX 4 - -#define CIPHER_KEYS (4) -#define CIPHER_KEY_LEN (40) - -struct key_config { - u8 cipher; - u8 keylen; -}; - struct hwcfg_r505 { u8 cr39_values[14]; u8 reserved1[14]; @@ -151,9 +147,6 @@ union at76_hwcfg { #define WEP_SMALL_KEY_LEN (40 / 8) #define WEP_LARGE_KEY_LEN (104 / 8) -#define WEP_KEYS (4) - - struct at76_card_config { u8 exclude_unencrypted; @@ -168,7 +161,7 @@ struct at76_card_config { u8 privacy_invoked; u8 wep_default_key_id; /* 0..3 */ u8 current_ssid[32]; - u8 wep_default_key_value[4][WEP_LARGE_KEY_LEN]; + u8 wep_default_key_value[4][WEP_KEY_LEN]; u8 ssid_len; u8 short_preamble; __le16 beacon_period; @@ -193,7 +186,7 @@ struct at76_rx_buffer { u8 link_quality; u8 noise_level; __le32 rx_time; - u8 packet[IEEE80211_MAX_FRAG_THRESHOLD]; + u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN]; } __attribute__((packed)); /* Length of Atmel-specific Tx header before 802.11 frame */ @@ -203,11 +196,8 @@ struct at76_tx_buffer { __le16 wlength; u8 tx_rate; u8 padding; - u8 key_id; - u8 cipher_type; - u8 cipher_length; - u8 reserved; - u8 packet[IEEE80211_MAX_FRAG_THRESHOLD]; + u8 reserved[4]; + u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN]; } __attribute__((packed)); /* defines for scan_type below */ @@ -254,7 +244,6 @@ struct set_mib_buffer { u8 byte; __le16 word; u8 addr[ETH_ALEN]; - u8 data[256]; /* we need more space for mib_mac_encryption */ } data; } __attribute__((packed)); @@ -328,24 +317,10 @@ struct mib_mac_wep { u8 exclude_unencrypted; __le32 wep_icv_error_count; __le32 wep_excluded_count; - u8 wep_default_keyvalue[WEP_KEYS][WEP_LARGE_KEY_LEN]; + u8 wep_default_keyvalue[WEP_KEYS][WEP_KEY_LEN]; u8 encryption_level; /* 1 for 40bit, 2 for 104bit encryption */ } __attribute__((packed)); -struct mib_mac_encryption { - u8 cipher_default_keyvalue[CIPHER_KEYS][CIPHER_KEY_LEN]; - u8 tkip_bssid[6]; - u8 privacy_invoked; - u8 cipher_default_key_id; - u8 cipher_default_group_key_id; - u8 exclude_unencrypted; - u8 wep_encryption_type; - u8 ckip_key_permutation; /* bool */ - __le32 wep_icv_error_count; - __le32 wep_excluded_count; - u8 key_rsc[CIPHER_KEYS][8]; -} __attribute__((packed)); - struct mib_phy { __le32 ed_threshold; @@ -389,6 +364,16 @@ struct at76_fw_header { __le32 ext_fw_len; /* external firmware image length */ } __attribute__((packed)); +enum mac_state { + MAC_INIT, + MAC_SCANNING, + MAC_AUTH, + MAC_ASSOC, + MAC_JOINING, + MAC_CONNECTED, + MAC_OWN_IBSS +}; + /* a description of a regulatory domain and the allowed channels */ struct reg_domain { u16 code; @@ -396,6 +381,47 @@ struct reg_domain { u32 channel_map; /* if bit N is set, channel (N+1) is allowed */ }; +/* how long do we keep a (I)BSS in the bss_list in jiffies + this should be long enough for the user to retrieve the table + (by iwlist ?) after the device started, because all entries from + other channels than the one the device locks on get removed, too */ +#define BSS_LIST_TIMEOUT (120 * HZ) +/* struct to store BSS info found during scan */ +#define BSS_LIST_MAX_RATE_LEN 32 /* 32 rates should be enough ... */ + +struct bss_info { + struct list_head list; + + u8 bssid[ETH_ALEN]; /* bssid */ + u8 ssid[IW_ESSID_MAX_SIZE]; /* essid */ + u8 ssid_len; /* length of ssid above */ + u8 channel; + u16 capa; /* BSS capabilities */ + u16 beacon_interval; /* beacon interval, Kus (1024 microseconds) */ + u8 rates[BSS_LIST_MAX_RATE_LEN]; /* supported rates in units of + 500 kbps, ORed with 0x80 for + basic rates */ + u8 rates_len; + + /* quality of received beacon */ + u8 rssi; + u8 link_qual; + u8 noise_level; + + unsigned long last_rx; /* time (jiffies) of last beacon received */ +}; + +/* a rx data buffer to collect rx fragments */ +struct rx_data_buf { + u8 sender[ETH_ALEN]; /* sender address */ + u16 seqnr; /* sequence number */ + u16 fragnr; /* last fragment received */ + unsigned long last_rx; /* jiffies of last rx */ + struct sk_buff *skb; /* == NULL if entry is free */ +}; + +#define NR_RX_DATA_BUF 8 + /* Data for one loaded firmware file */ struct fwentry { const char *const fwname; @@ -412,9 +438,11 @@ struct fwentry { struct at76_priv { struct usb_device *udev; /* USB device pointer */ + struct net_device *netdev; /* net device pointer */ + struct net_device_stats stats; /* net device stats */ + struct iw_statistics wstats; /* wireless stats */ struct sk_buff *rx_skb; /* skbuff for receiving data */ - struct sk_buff *tx_skb; /* skbuff for transmitting data */ void *bulk_out_buffer; /* buffer for sending data */ struct urb *tx_urb; /* URB for sending data */ @@ -426,17 +454,26 @@ struct at76_priv { struct mutex mtx; /* locks this structure */ /* work queues */ + struct work_struct work_assoc_done; + struct work_struct work_join; + struct work_struct work_new_bss; + struct work_struct work_start_scan; struct work_struct work_set_promisc; struct work_struct work_submit_rx; - struct delayed_work dwork_hw_scan; + struct delayed_work dwork_restart; + struct delayed_work dwork_get_scan; + struct delayed_work dwork_beacon; + struct delayed_work dwork_auth; + struct delayed_work dwork_assoc; struct tasklet_struct rx_tasklet; /* the WEP stuff */ int wep_enabled; /* 1 if WEP is enabled */ int wep_key_id; /* key id to be used */ - u8 wep_keys[WEP_KEYS][WEP_LARGE_KEY_LEN]; /* WEP keys */ - u8 wep_keys_len[WEP_KEYS]; /* length of WEP keys */ + u8 wep_keys[WEP_KEYS][WEP_KEY_LEN]; /* the four WEP keys, + 5 or 13 bytes are used */ + u8 wep_keys_len[WEP_KEYS]; /* the length of the above keys */ int channel; int iw_mode; @@ -458,13 +495,44 @@ struct at76_priv { int scan_mode; /* SCAN_TYPE_ACTIVE, SCAN_TYPE_PASSIVE */ int scan_need_any; /* if set, need to scan for any ESSID */ + /* the list we got from scanning */ + spinlock_t bss_list_spinlock; /* protects bss_list operations */ + struct list_head bss_list; /* list of BSS we got beacons from */ + struct timer_list bss_list_timer; /* timer to purge old entries + from bss_list */ + struct bss_info *curr_bss; /* current BSS */ u16 assoc_id; /* current association ID, if associated */ + u8 wanted_bssid[ETH_ALEN]; + int wanted_bssid_valid; /* != 0 if wanted_bssid is to be used */ + + /* some data for infrastructure mode only */ + spinlock_t mgmt_spinlock; /* this spinlock protects access to + next_mgmt_bulk */ + + struct at76_tx_buffer *next_mgmt_bulk; /* pending management msg to + send via bulk out */ + enum mac_state mac_state; + enum { + SCAN_IDLE, + SCAN_IN_PROGRESS, + SCAN_COMPLETED + } scan_state; + time_t last_scan; + + int retries; /* remaining retries in case of timeout when + * sending AuthReq or AssocReq */ u8 pm_mode; /* power management mode */ u32 pm_period; /* power management period in microseconds */ struct reg_domain const *domain; /* reg domain description */ + /* iwspy support */ + spinlock_t spy_spinlock; + struct iw_spy_data spy_data; + + struct iw_public_data wireless_data; + /* These fields contain HW config provided by the device (not all of * these fields are used by all board types) */ u8 mac_addr[ETH_ALEN]; @@ -472,6 +540,9 @@ struct at76_priv { struct at76_card_config card_config; + /* store rx fragments until complete */ + struct rx_data_buf rx_data[NR_RX_DATA_BUF]; + enum board_type board_type; struct mib_fw_version fw_version; @@ -479,20 +550,58 @@ struct at76_priv { unsigned int netdev_registered:1; struct set_mib_buffer mib_buf; /* global buffer for set_mib calls */ + /* beacon counting */ int beacon_period; /* period of mgmt beacons, Kus */ + int beacons_received; + unsigned long beacons_last_qual; /* time we restarted counting + beacons */ +}; - struct ieee80211_hw *hw; - int mac80211_registered; - - struct key_config keys[4]; /* installed key types */ - u8 default_pairwise_key; - u8 default_group_key; +struct at76_rx_radiotap { + struct ieee80211_radiotap_header rt_hdr; + __le64 rt_tsft; + u8 rt_flags; + u8 rt_rate; + s8 rt_signal; + s8 rt_noise; }; -#define AT76_SUPPORTED_FILTERS FIF_PROMISC_IN_BSS +#define AT76_RX_RADIOTAP_PRESENT \ + ((1 << IEEE80211_RADIOTAP_TSFT) | \ + (1 << IEEE80211_RADIOTAP_FLAGS) | \ + (1 << IEEE80211_RADIOTAP_RATE) | \ + (1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) | \ + (1 << IEEE80211_RADIOTAP_DB_ANTNOISE)) + +#define BEACON_MAX_DATA_LENGTH 1500 + +/* the maximum size of an AssocReq packet */ +#define ASSOCREQ_MAX_SIZE \ + (AT76_TX_HDRLEN + sizeof(struct ieee80211_assoc_request) + \ + 1 + 1 + IW_ESSID_MAX_SIZE + 1 + 1 + 4) + +/* for shared secret auth, add the challenge text size */ +#define AUTH_FRAME_SIZE (AT76_TX_HDRLEN + sizeof(struct ieee80211_auth)) + +/* Maximal number of AuthReq retries */ +#define AUTH_RETRIES 3 +/* Maximal number of AssocReq retries */ +#define ASSOC_RETRIES 3 + +/* Beacon timeout in managed mode when we are connected */ +#define BEACON_TIMEOUT (10 * HZ) + +/* Timeout for authentication response */ +#define AUTH_TIMEOUT (1 * HZ) + +/* Timeout for association response */ +#define ASSOC_TIMEOUT (1 * HZ) + +/* Polling interval when scan is running */ #define SCAN_POLL_INTERVAL (HZ / 4) +/* Command completion timeout */ #define CMD_COMPLETION_TIMEOUT (5 * HZ) #define DEF_RTS_THRESHOLD 1536 @@ -502,6 +611,8 @@ struct at76_priv { #define DEF_SCAN_MIN_TIME 10 #define DEF_SCAN_MAX_TIME 120 +#define MAX_RTS_THRESHOLD (MAX_FRAG_THRESHOLD + 1) + /* the max padding size for tx in bytes (see calc_padding) */ #define MAX_PADDING_SIZE 53 diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 5ffe269..ab69c1b 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -622,7 +622,7 @@ static int set_ctrl_bits(void) } /* sets ctrl & data port bits according to current signals values */ -static void set_bits(void) +static void panel_set_bits(void) { set_data_bits(); set_ctrl_bits(); @@ -707,12 +707,12 @@ static void lcd_send_serial(int byte) */ for (bit = 0; bit < 8; bit++) { bits.cl = BIT_CLR; /* CLK low */ - set_bits(); + panel_set_bits(); bits.da = byte & 1; - set_bits(); + panel_set_bits(); udelay(2); /* maintain the data during 2 us before CLK up */ bits.cl = BIT_SET; /* CLK high */ - set_bits(); + panel_set_bits(); udelay(1); /* maintain the strobe during 1 us */ byte >>= 1; } @@ -727,7 +727,7 @@ static void lcd_backlight(int on) /* The backlight is activated by seting the AUTOFEED line to +5V */ spin_lock(&pprt_lock); bits.bl = on; - set_bits(); + panel_set_bits(); spin_unlock(&pprt_lock); } diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 8bcde8c..b2ceb4a 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_PCI) += host/ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ +obj-$(CONFIG_USB_ISP1760_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_FHCI_HCD) += host/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 97ba4a9..326dd7f 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1349,9 +1349,6 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, - { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */ - .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ - }, { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index c54fc40..a4301dc 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -298,19 +298,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); /** - * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled - * @dev: USB Host Controller being resumed - * - * Store this function in the HCD's struct pci_driver as .resume_early. - */ -int usb_hcd_pci_resume_early(struct pci_dev *dev) -{ - pci_restore_state(dev); - return 0; -} -EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early); - -/** * usb_hcd_pci_resume - power management resume of a PCI-based HCD * @dev: USB Host Controller being resumed * @@ -333,6 +320,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev) } #endif + pci_restore_state(dev); + hcd = pci_get_drvdata(dev); if (hcd->state != HC_STATE_SUSPENDED) { dev_dbg(hcd->self.controller, diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 5b94a56..f750eb1 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev); #ifdef CONFIG_PM extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg); -extern int usb_hcd_pci_resume_early(struct pci_dev *dev); extern int usb_hcd_pci_resume(struct pci_dev *dev); #endif /* CONFIG_PM */ diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index d6c5bcd..d701bf4 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -1622,6 +1622,8 @@ static int qe_ep_disable(struct usb_ep *_ep) nuke(ep, -ESHUTDOWN); ep->desc = NULL; ep->stopped = 1; + ep->tx_req = NULL; + qe_ep_reset(udc, ep->epnum); spin_unlock_irqrestore(&udc->lock, flags); cpm_muram_free(cpm_muram_offset(ep->rxbase)); @@ -1681,14 +1683,11 @@ static void qe_free_request(struct usb_ep *_ep, struct usb_request *_req) kfree(req); } -/* queues (submits) an I/O request to an endpoint */ -static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, - gfp_t gfp_flags) +static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req) { struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); struct qe_req *req = container_of(_req, struct qe_req, req); struct qe_udc *udc; - unsigned long flags; int reval; udc = ep->udc; @@ -1732,7 +1731,7 @@ static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, list_add_tail(&req->queue, &ep->queue); dev_vdbg(udc->dev, "gadget have request in %s! %d\n", ep->name, req->req.length); - spin_lock_irqsave(&udc->lock, flags); + /* push the request to device */ if (ep_is_in(ep)) reval = ep_req_send(ep, req); @@ -1748,11 +1747,24 @@ static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, if (ep->dir == USB_DIR_OUT) reval = ep_req_receive(ep, req); - spin_unlock_irqrestore(&udc->lock, flags); - return 0; } +/* queues (submits) an I/O request to an endpoint */ +static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); + struct qe_udc *udc = ep->udc; + unsigned long flags; + int ret; + + spin_lock_irqsave(&udc->lock, flags); + ret = __qe_ep_queue(_ep, _req); + spin_unlock_irqrestore(&udc->lock, flags); + return ret; +} + /* dequeues (cancels, unlinks) an I/O request from an endpoint */ static int qe_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) { @@ -2008,7 +2020,7 @@ static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value, udc->ep0_dir = USB_DIR_IN; /* data phase */ - status = qe_ep_queue(&ep->ep, &req->req, GFP_ATOMIC); + status = __qe_ep_queue(&ep->ep, &req->req); if (status == 0) return; @@ -2151,6 +2163,9 @@ static int reset_irq(struct qe_udc *udc) { unsigned char i; + if (udc->usb_state == USB_STATE_DEFAULT) + return 0; + qe_usb_disable(); out_8(&udc->usb_regs->usb_usadr, 0); @@ -2442,8 +2457,12 @@ static int __devinit qe_udc_reg_init(struct qe_udc *udc) struct usb_ctlr __iomem *qe_usbregs; qe_usbregs = udc->usb_regs; - /* Init the usb register */ + /* Spec says that we must enable the USB controller to change mode. */ out_8(&qe_usbregs->usb_usmod, 0x01); + /* Mode changed, now disable it, since muram isn't initialized yet. */ + out_8(&qe_usbregs->usb_usmod, 0x00); + + /* Initialize the rest. */ out_be16(&qe_usbregs->usb_usbmr, 0); out_8(&qe_usbregs->usb_uscom, 0); out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR); @@ -2604,6 +2623,10 @@ static int __devinit qe_udc_probe(struct of_device *ofdev, (unsigned long)udc_controller); /* request irq and disable DR */ udc_controller->usb_irq = irq_of_parse_and_map(np, 0); + if (!udc_controller->usb_irq) { + ret = -EINVAL; + goto err_noirq; + } ret = request_irq(udc_controller->usb_irq, qe_udc_irq, 0, driver_name, udc_controller); @@ -2625,6 +2648,8 @@ static int __devinit qe_udc_probe(struct of_device *ofdev, err6: free_irq(udc_controller->usb_irq, udc_controller); err5: + irq_dispose_mapping(udc_controller->usb_irq); +err_noirq: if (udc_controller->nullmap) { dma_unmap_single(udc_controller->gadget.dev.parent, udc_controller->nullp, 256, @@ -2648,7 +2673,7 @@ err2: iounmap(udc_controller->usb_regs); err1: kfree(udc_controller); - + udc_controller = NULL; return ret; } @@ -2710,6 +2735,7 @@ static int __devexit qe_udc_remove(struct of_device *ofdev) kfree(ep->txframe); free_irq(udc_controller->usb_irq, udc_controller); + irq_dispose_mapping(udc_controller->usb_irq); tasklet_kill(&udc_controller->rx_tasklet); diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 9b36205..0ce4e28 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -904,8 +904,8 @@ static void pxa25x_ep_fifo_flush(struct usb_ep *_ep) /* most IN status is the same, but ISO can't stall */ *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR - | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) - ? 0 : UDCCS_BI_SST; + | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + ? 0 : UDCCS_BI_SST); } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bb21fb0..abb9a77 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif .shutdown = usb_hcd_pci_shutdown, diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 5d625c3..f9961b4 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 944f7e0..cf5e4cf 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif /* PM */ }; diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 2291c5f..958751c 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -227,13 +227,13 @@ void scan_async_work(struct work_struct *work) * Now that the ASL is updated, complete the removal of any * removed qsets. */ - spin_lock(&whc->lock); + spin_lock_irq(&whc->lock); list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) { qset_remove_complete(whc, qset); } - spin_unlock(&whc->lock); + spin_unlock_irq(&whc->lock); } /** diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index 7dc85a0..df8b85f 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -255,13 +255,13 @@ void scan_periodic_work(struct work_struct *work) * Now that the PZL is updated, complete the removal of any * removed qsets. */ - spin_lock(&whc->lock); + spin_lock_irq(&whc->lock); list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { qset_remove_complete(whc, qset); } - spin_unlock(&whc->lock); + spin_unlock_irq(&whc->lock); } /** diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 537f953..6d106e7 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -621,9 +621,9 @@ static int __init aircable_init(void) goto failed_usb_register; return 0; -failed_serial_register: - usb_serial_deregister(&aircable_device); failed_usb_register: + usb_serial_deregister(&aircable_device); +failed_serial_register: return retval; } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7559733..f92f4d7 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -662,6 +662,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -1064,8 +1065,10 @@ static int set_serial_info(struct tty_struct *tty, if (!capable(CAP_SYS_ADMIN)) { if (((new_serial.flags & ~ASYNC_USR_MASK) != - (priv->flags & ~ASYNC_USR_MASK))) + (priv->flags & ~ASYNC_USR_MASK))) { + unlock_kernel(); return -EPERM; + } priv->flags = ((priv->flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK)); priv->custom_divisor = new_serial.custom_divisor; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 1b62eff..e300c84 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -844,6 +844,9 @@ #define TML_VID 0x1B91 /* Vendor ID */ #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ +/* NDI Polaris System */ +#define FTDI_NDI_HUC_PID 0xDA70 + /* Propox devices */ #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6c89da9..bfd0b68 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -199,14 +199,15 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define NOVATELWIRELESS_PRODUCT_MC950D 0x4400 /* FUTURE NOVATEL PRODUCTS */ -#define NOVATELWIRELESS_PRODUCT_EVDO_1 0x6000 -#define NOVATELWIRELESS_PRODUCT_HSPA_1 0x7000 -#define NOVATELWIRELESS_PRODUCT_EMBEDDED_1 0x8000 -#define NOVATELWIRELESS_PRODUCT_GLOBAL_1 0x9000 -#define NOVATELWIRELESS_PRODUCT_EVDO_2 0x6001 -#define NOVATELWIRELESS_PRODUCT_HSPA_2 0x7001 -#define NOVATELWIRELESS_PRODUCT_EMBEDDED_2 0x8001 -#define NOVATELWIRELESS_PRODUCT_GLOBAL_2 0x9001 +#define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED 0X6000 +#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0X6001 +#define NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED 0X7000 +#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED 0X7001 +#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED 0X8000 +#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0X8001 +#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0X9000 +#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0X9001 +#define NOVATELWIRELESS_PRODUCT_GLOBAL 0XA001 /* AMOI PRODUCTS */ #define AMOI_VENDOR_ID 0x1614 @@ -216,6 +217,27 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define DELL_VENDOR_ID 0x413C +/* Dell modems */ +#define DELL_PRODUCT_5700_MINICARD 0x8114 +#define DELL_PRODUCT_5500_MINICARD 0x8115 +#define DELL_PRODUCT_5505_MINICARD 0x8116 +#define DELL_PRODUCT_5700_EXPRESSCARD 0x8117 +#define DELL_PRODUCT_5510_EXPRESSCARD 0x8118 + +#define DELL_PRODUCT_5700_MINICARD_SPRINT 0x8128 +#define DELL_PRODUCT_5700_MINICARD_TELUS 0x8129 + +#define DELL_PRODUCT_5720_MINICARD_VZW 0x8133 +#define DELL_PRODUCT_5720_MINICARD_SPRINT 0x8134 +#define DELL_PRODUCT_5720_MINICARD_TELUS 0x8135 +#define DELL_PRODUCT_5520_MINICARD_CINGULAR 0x8136 +#define DELL_PRODUCT_5520_MINICARD_GENERIC_L 0x8137 +#define DELL_PRODUCT_5520_MINICARD_GENERIC_I 0x8138 + +#define DELL_PRODUCT_5730_MINICARD_SPRINT 0x8180 +#define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181 +#define DELL_PRODUCT_5730_MINICARD_VZW 0x8182 + #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da #define KYOCERA_PRODUCT_KPC680 0x180a @@ -274,12 +296,6 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ERICSSON_VENDOR_ID 0x0bdb #define ERICSSON_PRODUCT_F3507G 0x1900 -/* Pantech products */ -#define PANTECH_VENDOR_ID 0x106c -#define PANTECH_PRODUCT_PC5740 0x3701 -#define PANTECH_PRODUCT_PC5750 0x3702 /* PX-500 */ -#define PANTECH_PRODUCT_UM150 0x3711 - static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -395,31 +411,37 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_1) }, /* Novatel EVDO product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_1) }, /* Novatel HSPA product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_1) }, /* Novatel Embedded product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_1) }, /* Novatel Global product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_2) }, /* Novatel EVDO product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_2) }, /* Novatel HSPA product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_2) }, /* Novatel Embedded product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_2) }, /* Novatel Global product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) }, /* Novatel EVDO product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) }, /* Novatel EVDO product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) }, /* Novatel HSPA product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) }, /* Novatel EVDO Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) }, /* Novatel HSPA Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL) }, /* Novatel Global product */ { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) }, - { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8129) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8133) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8136) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8138) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8147) }, /* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5505_MINICARD) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_EXPRESSCARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5510_EXPRESSCARD) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_SPRINT) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_TELUS) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_VZW) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_SPRINT) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_TELUS) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_CINGULAR) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_L) }, /* Dell Wireless HSDPA 5520 */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_I) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8147) }, /* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, @@ -488,9 +510,6 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) }, - { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5740) }, - { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5750) }, - { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_UM150) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index baf5911..2620bf6 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -176,7 +176,7 @@ static unsigned int product_5052_count; /* the array dimension is the number of default entries plus */ /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */ /* null entry */ -static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_3410[10+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -185,9 +185,11 @@ static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, }; -static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, @@ -195,7 +197,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; -static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -208,6 +210,8 @@ static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index b7ea5db..f323c60 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -30,6 +30,8 @@ #define IBM_VENDOR_ID 0x04b3 #define TI_3410_PRODUCT_ID 0x3410 #define IBM_4543_PRODUCT_ID 0x4543 +#define IBM_454B_PRODUCT_ID 0x454b +#define IBM_454C_PRODUCT_ID 0x454c #define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 2a42b86..727c506 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -64,6 +64,7 @@ */ #define VENDOR_ID_NOKIA 0x0421 #define VENDOR_ID_NIKON 0x04b0 +#define VENDOR_ID_PENTAX 0x0a17 #define VENDOR_ID_MOTOROLA 0x22b8 /*********************************************************************** @@ -158,6 +159,7 @@ static int slave_configure(struct scsi_device *sdev) switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) { case VENDOR_ID_NOKIA: case VENDOR_ID_NIKON: + case VENDOR_ID_PENTAX: case VENDOR_ID_MOTOROLA: if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK))) diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 1d5438e..fb65d221 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -558,32 +558,10 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb) if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) { - /* The command succeeded. If the capacity is odd - * (i.e., if the sector number is even) then the - * "always-even" heuristic would be wrong for this - * device. Issue a WARN() so that the kerneloops.org - * project will be notified and we will then know to - * mark the device with a CAPACITY_OK flag. Hopefully - * this will occur for only a few devices. - * - * Use the sign of us->last_sector_hacks to tell whether - * the warning has already been issued; we don't need - * more than one warning per device. + /* The command succeeded. We know this device doesn't + * have the last-sector bug, so stop checking it. */ - if (!(sector & 1) && us->use_last_sector_hacks > 0) { - unsigned vid = le16_to_cpu( - us->pusb_dev->descriptor.idVendor); - unsigned pid = le16_to_cpu( - us->pusb_dev->descriptor.idProduct); - unsigned rev = le16_to_cpu( - us->pusb_dev->descriptor.bcdDevice); - - WARN(1, "%s: Successful last sector success at %u, " - "device %04x:%04x:%04x\n", - sdkp->disk->disk_name, sector, - vid, pid, rev); - us->use_last_sector_hacks = -1; - } + us->use_last_sector_hacks = 0; } else { /* The command failed. Allow up to 3 retries in case this @@ -599,14 +577,6 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb) srb->result = SAM_STAT_CHECK_CONDITION; memcpy(srb->sense_buffer, record_not_found, sizeof(record_not_found)); - - /* In theory we might want to issue a WARN() here if the - * capacity is even, since it could indicate the device - * has the READ CAPACITY bug _and_ the real capacity is - * odd. But it could also indicate that the device - * simply can't access its last sector, a failure mode - * which is surprisingly common. So no warning. - */ } done: diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 69269f7..50dc33a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1214,7 +1214,7 @@ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, "Datafab", "KECF-USB", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_INQUIRY ), + US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), /* Reported by Rauch Wolke <rauchwolke@gmx.net> */ UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, @@ -1354,21 +1354,6 @@ UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), - -/* Submitted by Per Winkvist <per.winkvist@uk.com> */ -UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff, - "Pentax", - "Optio S/S4", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_INQUIRY ), - -/* Reported by Jaak Ristioja <Ristioja@gmail.com> */ -UNUSUAL_DEV( 0x0a17, 0x006e, 0x0100, 0x0100, - "Pentax", - "K10D", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_CAPACITY ), - /* These are virtual windows driver CDs, which the zd1211rw driver * automatically converts into WLAN devices. */ UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index f026770..fb19803 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1054,9 +1054,7 @@ config FB_RIVA_BACKLIGHT config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86_32 - select AGP - select AGP_INTEL + depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1119,9 +1117,7 @@ config FB_CARILLO_RANCH config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86 - select AGP - select AGP_INTEL + depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 8058572..018850c 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -841,7 +841,7 @@ static int tt_detect(void) tt_dmasnd.ctrl = DMASND_CTRL_OFF; udelay(20); /* wait a while for things to settle down */ } - mono_moni = (mfp.par_dt_reg & 0x80) == 0; + mono_moni = (st_mfp.par_dt_reg & 0x80) == 0; tt_get_par(&par); tt_encode_var(&atafb_predefined[0], &par); @@ -2035,7 +2035,7 @@ static int stste_detect(void) tt_dmasnd.ctrl = DMASND_CTRL_OFF; udelay(20); /* wait a while for things to settle down */ } - mono_moni = (mfp.par_dt_reg & 0x80) == 0; + mono_moni = (st_mfp.par_dt_reg & 0x80) == 0; stste_get_par(&par); stste_encode_var(&atafb_predefined[0], &par); @@ -2086,20 +2086,20 @@ static void st_ovsc_switch(void) return; local_irq_save(flags); - mfp.tim_ct_b = 0x10; - mfp.active_edge |= 8; - mfp.tim_ct_b = 0; - mfp.tim_dt_b = 0xf0; - mfp.tim_ct_b = 8; - while (mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */ + st_mfp.tim_ct_b = 0x10; + st_mfp.active_edge |= 8; + st_mfp.tim_ct_b = 0; + st_mfp.tim_dt_b = 0xf0; + st_mfp.tim_ct_b = 8; + while (st_mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */ ; - new = mfp.tim_dt_b; + new = st_mfp.tim_dt_b; do { udelay(LINE_DELAY); old = new; - new = mfp.tim_dt_b; + new = st_mfp.tim_dt_b; } while (old != new); - mfp.tim_ct_b = 0x10; + st_mfp.tim_ct_b = 0x10; udelay(SYNC_DELAY); if (atari_switches & ATARI_SWITCH_OVSC_IKBD) diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index db16112..2181ce4 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -1475,7 +1475,7 @@ static int aty128fb_set_par(struct fb_info *info) aty128_set_pll(&par->pll, par); aty128_set_fifo(&par->fifo_reg, par); - config = aty_ld_le32(CONFIG_CNTL) & ~3; + config = aty_ld_le32(CNFG_CNTL) & ~3; #if defined(__BIG_ENDIAN) if (par->crtc.bpp == 32) @@ -1484,7 +1484,7 @@ static int aty128fb_set_par(struct fb_info *info) config |= 1; /* make aperture do 16 bit swapping */ #endif - aty_st_le32(CONFIG_CNTL, config); + aty_st_le32(CNFG_CNTL, config); aty_st_8(CRTC_EXT_CNTL + 1, 0); /* turn the video back on */ info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3; @@ -1875,7 +1875,7 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i u32 dac; /* Get the chip revision */ - chip_rev = (aty_ld_le32(CONFIG_CNTL) >> 16) & 0x1F; + chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F; strcpy(video_card, "Rage128 XX "); video_card[8] = ent->device >> 8; @@ -2057,7 +2057,7 @@ static int __devinit aty128_probe(struct pci_dev *pdev, const struct pci_device_ /* Grab memory size from the card */ // How does this relate to the resource length from the PCI hardware? - par->vram_size = aty_ld_le32(CONFIG_MEMSIZE) & 0x03FFFFFF; + par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF; /* Virtualize the framebuffer */ info->screen_base = ioremap(fb_addr, par->vram_size); @@ -2365,7 +2365,6 @@ static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, int dx static void aty128_set_suspend(struct aty128fb_par *par, int suspend) { u32 pmgt; - u16 pwr_command; struct pci_dev *pdev = par->pdev; if (!par->pm_reg) @@ -2374,6 +2373,8 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend) /* Set the chip into the appropriate suspend mode (we use D2, * D3 would require a complete re-initialisation of the chip, * including PCI config registers, clocks, AGP configuration, ...) + * + * For resume, the core will have already brought us back to D0 */ if (suspend) { /* Make sure CRTC2 is reset. Remove that the day we decide to @@ -2391,17 +2392,9 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend) aty_st_le32(BUS_CNTL1, 0x00000010); aty_st_le32(MEM_POWER_MISC, 0x0c830000); mdelay(100); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); + /* Switch PCI power management to D2 */ - pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, - (pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); - } else { - /* Switch back PCI power management to D0 */ - mdelay(100); - pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); - mdelay(100); + pci_set_power_state(pdev, PCI_D2); } } @@ -2410,6 +2403,12 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state) struct fb_info *info = pci_get_drvdata(pdev); struct aty128fb_par *par = info->par; + /* Because we may change PCI D state ourselves, we need to + * first save the config space content so the core can + * restore it properly on resume. + */ + pci_save_state(pdev); + /* We don't do anything but D2, for now we return 0, but * we may want to change that. How do we know if the BIOS * can properly take care of D3 ? Also, with swsusp, we @@ -2476,6 +2475,11 @@ static int aty128_do_resume(struct pci_dev *pdev) if (pdev->dev.power.power_state.event == PM_EVENT_ON) return 0; + /* PCI state will have been restored by the core, so + * we should be in D0 now with our config space fully + * restored + */ + /* Wakeup chip */ aty128_set_suspend(par, 0); par->asleep = 0; diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index cc6b470..1207c20 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -135,7 +135,7 @@ #if defined(CONFIG_PM) || defined(CONFIG_PMAC_BACKLIGHT) || \ defined (CONFIG_FB_ATY_GENERIC_LCD) || defined(CONFIG_FB_ATY_BACKLIGHT) static const u32 lt_lcd_regs[] = { - CONFIG_PANEL_LG, + CNFG_PANEL_LG, LCD_GEN_CNTL_LG, DSTN_CONTROL_LG, HFB_PITCH_ADDR_LG, @@ -446,7 +446,7 @@ static int __devinit correct_chipset(struct atyfb_par *par) par->pll_limits.ecp_max = aty_chips[i].ecp_max; par->features = aty_chips[i].features; - chip_id = aty_ld_le32(CONFIG_CHIP_ID, par); + chip_id = aty_ld_le32(CNFG_CHIP_ID, par); type = chip_id & CFG_CHIP_TYPE; rev = (chip_id & CFG_CHIP_REV) >> 24; @@ -629,7 +629,7 @@ static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc) crtc->lcd_index = aty_ld_le32(LCD_INDEX, par); aty_st_le32(LCD_INDEX, crtc->lcd_index, par); } - crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par); + crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par); crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par); @@ -676,7 +676,7 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc) aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl & ~(CRTC_EXT_DISP_EN | CRTC_EN), par); /* update non-shadow registers first */ - aty_st_lcd(CONFIG_PANEL, crtc->lcd_config_panel, par); + aty_st_lcd(CNFG_PANEL, crtc->lcd_config_panel, par); aty_st_lcd(LCD_GEN_CNTL, crtc->lcd_gen_cntl & ~(CRTC_RW_SELECT | SHADOW_EN | SHADOW_RW_EN), par); @@ -858,7 +858,7 @@ static int aty_var_to_crtc(const struct fb_info *info, if (!M64_HAS(MOBIL_BUS)) crtc->lcd_index |= CRTC2_DISPLAY_DIS; - crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par) | 0x4000; + crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par) | 0x4000; crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par) & ~CRTC_RW_SELECT; crtc->lcd_gen_cntl &= @@ -1978,7 +1978,7 @@ static int aty_power_mgmt(int sleep, struct atyfb_par *par) return timeout ? 0 : -EIO; } -#endif +#endif /* CONFIG_PPC_PMAC */ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) { @@ -2002,9 +2002,15 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) par->asleep = 1; par->lock_blank = 1; + /* Because we may change PCI D state ourselves, we need to + * first save the config space content so the core can + * restore it properly on resume. + */ + pci_save_state(pdev); + #ifdef CONFIG_PPC_PMAC /* Set chip to "suspend" mode */ - if (aty_power_mgmt(1, par)) { + if (machine_is(powermac) && aty_power_mgmt(1, par)) { par->asleep = 0; par->lock_blank = 0; atyfb_blank(FB_BLANK_UNBLANK, info); @@ -2047,11 +2053,15 @@ static int atyfb_pci_resume(struct pci_dev *pdev) acquire_console_sem(); + /* PCI state will have been restored by the core, so + * we should be in D0 now with our config space fully + * restored + */ + #ifdef CONFIG_PPC_PMAC - if (pdev->dev.power.power_state.event == 2) + if (machine_is(powermac) && + pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) aty_power_mgmt(0, par); -#else - pci_set_power_state(pdev, PCI_D0); #endif aty_resume_chip(info); @@ -2254,7 +2264,7 @@ static int __devinit aty_init(struct fb_info *info) if (!M64_HAS(INTEGRATED)) { u32 stat0; u8 dac_type, dac_subtype, clk_type; - stat0 = aty_ld_le32(CONFIG_STAT0, par); + stat0 = aty_ld_le32(CNFG_STAT0, par); par->bus_type = (stat0 >> 0) & 0x07; par->ram_type = (stat0 >> 3) & 0x07; ramname = aty_gx_ram[par->ram_type]; @@ -2324,7 +2334,7 @@ static int __devinit aty_init(struct fb_info *info) par->dac_ops = &aty_dac_ct; par->pll_ops = &aty_pll_ct; par->bus_type = PCI; - par->ram_type = (aty_ld_le32(CONFIG_STAT0, par) & 0x07); + par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07); ramname = aty_ct_ram[par->ram_type]; /* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */ if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM) @@ -2433,7 +2443,7 @@ static int __devinit aty_init(struct fb_info *info) } if (M64_HAS(MAGIC_VRAM_SIZE)) { - if (aty_ld_le32(CONFIG_STAT1, par) & 0x40000000) + if (aty_ld_le32(CNFG_STAT1, par) & 0x40000000) info->fix.smem_len += 0x400000; } @@ -2946,7 +2956,7 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev, * Fix PROMs idea of MEM_CNTL settings... */ mem = aty_ld_le32(MEM_CNTL, par); - chip_id = aty_ld_le32(CONFIG_CHIP_ID, par); + chip_id = aty_ld_le32(CNFG_CHIP_ID, par); if (((chip_id & CFG_CHIP_TYPE) == VT_CHIP_ID) && !((chip_id >> 24) & 1)) { switch (mem & 0x0f) { case 3: @@ -2964,7 +2974,7 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev, default: break; } - if ((aty_ld_le32(CONFIG_STAT0, par) & 7) >= SDRAM) + if ((aty_ld_le32(CNFG_STAT0, par) & 7) >= SDRAM) mem &= ~(0x00700000); } mem &= ~(0xcf80e000); /* Turn off all undocumented bits. */ @@ -3572,7 +3582,7 @@ static int __init atyfb_atari_probe(void) } /* Fake pci_id for correct_chipset() */ - switch (aty_ld_le32(CONFIG_CHIP_ID, par) & CFG_CHIP_TYPE) { + switch (aty_ld_le32(CNFG_CHIP_ID, par) & CFG_CHIP_TYPE) { case 0x00d7: par->pci_id = PCI_CHIP_MACH64GX; break; diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index d0f1a7f..16bb7e3 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -1936,8 +1936,8 @@ static void fixup_memory_mappings(struct radeonfb_info *rinfo) OUTREG(CRTC_GEN_CNTL, save_crtc_gen_cntl | CRTC_DISP_REQ_EN_B); mdelay(100); - aper_base = INREG(CONFIG_APER_0_BASE); - aper_size = INREG(CONFIG_APER_SIZE); + aper_base = INREG(CNFG_APER_0_BASE); + aper_size = INREG(CNFG_APER_SIZE); #ifdef SET_MC_FB_FROM_APERTURE /* Set framebuffer to be at the same address as set in PCI BAR */ @@ -2024,11 +2024,11 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo) ~CRTC_H_CUTOFF_ACTIVE_EN); } } else { - tmp = INREG(CONFIG_MEMSIZE); + tmp = INREG(CNFG_MEMSIZE); } /* mem size is bits [28:0], mask off the rest */ - rinfo->video_ram = tmp & CONFIG_MEMSIZE_MASK; + rinfo->video_ram = tmp & CNFG_MEMSIZE_MASK; /* * Hack to get around some busted production M6's @@ -2228,7 +2228,7 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev, */ rinfo->errata = 0; if (rinfo->family == CHIP_FAMILY_R300 && - (INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) + (INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) == CFG_ATI_REV_A11) rinfo->errata |= CHIP_ERRATA_R300_CG; diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 675abda..ca5f0dc 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -333,7 +333,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) if (!rinfo->has_CRTC2) { tmp = INPLL(pllSCLK_CNTL); - if ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13) + if ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13) tmp &= ~(SCLK_CNTL__FORCE_CP | SCLK_CNTL__FORCE_RB); tmp &= ~(SCLK_CNTL__FORCE_HDP | SCLK_CNTL__FORCE_DISP1 | SCLK_CNTL__FORCE_TOP | SCLK_CNTL__FORCE_SE | @@ -468,9 +468,9 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) /*RAGE_6::A11 A12 A12N1 A13, RV250::A11 A12, R300*/ if ((rinfo->family == CHIP_FAMILY_RV250 && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) || + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) || ((rinfo->family == CHIP_FAMILY_RV100) && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) { + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) { tmp |= SCLK_CNTL__FORCE_CP; tmp |= SCLK_CNTL__FORCE_VIP; } @@ -486,7 +486,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) /* RV200::A11 A12 RV250::A11 A12 */ if (((rinfo->family == CHIP_FAMILY_RV200) || (rinfo->family == CHIP_FAMILY_RV250)) && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) tmp |= SCLK_MORE_CNTL__FORCEON; OUTPLL(pllSCLK_MORE_CNTL, tmp); @@ -497,7 +497,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) /* RV200::A11 A12, RV250::A11 A12 */ if (((rinfo->family == CHIP_FAMILY_RV200) || (rinfo->family == CHIP_FAMILY_RV250)) && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) { + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) { tmp = INPLL(pllPLL_PWRMGT_CNTL); tmp |= PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE; OUTPLL(pllPLL_PWRMGT_CNTL, tmp); @@ -702,7 +702,7 @@ static void radeon_pm_restore_regs(struct radeonfb_info *rinfo) OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]); OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]); OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]); OUTREG(DISP_PWR_MAN, rinfo->save_regs[10]); @@ -1723,7 +1723,7 @@ static void radeon_reinitialize_M10(struct radeonfb_info *rinfo) OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]); OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]); OUTREG(OV0_BASE_ADDR, rinfo->save_regs[80]); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); OUTREG(BUS_CNTL, rinfo->save_regs[36]); OUTREG(BUS_CNTL1, rinfo->save_regs[14]); OUTREG(MPP_TB_CONFIG, rinfo->save_regs[37]); @@ -1961,7 +1961,7 @@ static void radeon_pm_m9p_reconfigure_mc(struct radeonfb_info *rinfo) OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, rinfo->save_regs[68] /*0x141555ff*/); OUTMC(rinfo, ixMC_IMP_CNTL_0, rinfo->save_regs[71] /*0x00009249*/); OUTREG(MC_IND_INDEX, 0); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); mdelay(20); } @@ -2361,7 +2361,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo) OUTMC(rinfo, ixMC_IMP_CNTL_0, 0x00009249); OUTREG(MC_IND_INDEX, 0); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); radeon_pm_full_reset_sdram(rinfo); @@ -2509,9 +2509,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo) static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend) { - u16 pwr_cmd; u32 tmp; - int i; if (!rinfo->pm_reg) return; @@ -2557,32 +2555,14 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend) } } - for (i = 0; i < 64; ++i) - pci_read_config_dword(rinfo->pdev, i * 4, - &rinfo->cfg_save[i]); - /* Switch PCI power management to D2. */ pci_disable_device(rinfo->pdev); - for (;;) { - pci_read_config_word( - rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, - &pwr_cmd); - if (pwr_cmd & 2) - break; - pci_write_config_word( - rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, - (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2); - mdelay(500); - } + pci_save_state(rinfo->pdev); + pci_set_power_state(rinfo->pdev, PCI_D2); } else { printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n", pci_name(rinfo->pdev)); - /* Switch back PCI powermanagment to D0 */ - mdelay(200); - pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0); - mdelay(500); - if (rinfo->family <= CHIP_FAMILY_RV250) { /* Reset the SDRAM controller */ radeon_pm_full_reset_sdram(rinfo); @@ -2598,37 +2578,10 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend) } } -static int radeon_restore_pci_cfg(struct radeonfb_info *rinfo) -{ - int i; - static u32 radeon_cfg_after_resume[64]; - - for (i = 0; i < 64; ++i) - pci_read_config_dword(rinfo->pdev, i * 4, - &radeon_cfg_after_resume[i]); - - if (radeon_cfg_after_resume[PCI_BASE_ADDRESS_0/4] - == rinfo->cfg_save[PCI_BASE_ADDRESS_0/4]) - return 0; /* assume everything is ok */ - - for (i = PCI_BASE_ADDRESS_0/4; i < 64; ++i) { - if (radeon_cfg_after_resume[i] != rinfo->cfg_save[i]) - pci_write_config_dword(rinfo->pdev, i * 4, - rinfo->cfg_save[i]); - } - pci_write_config_word(rinfo->pdev, PCI_CACHE_LINE_SIZE, - rinfo->cfg_save[PCI_CACHE_LINE_SIZE/4]); - pci_write_config_word(rinfo->pdev, PCI_COMMAND, - rinfo->cfg_save[PCI_COMMAND/4]); - return 1; -} - - int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) { struct fb_info *info = pci_get_drvdata(pdev); struct radeonfb_info *rinfo = info->par; - int i; if (mesg.event == pdev->dev.power.power_state.event) return 0; @@ -2674,6 +2627,11 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) pmac_suspend_agp_for_card(pdev); #endif /* CONFIG_PPC_PMAC */ + /* It's unclear whether or when the generic code will do that, so let's + * do it ourselves. We save state before we do any power management + */ + pci_save_state(pdev); + /* If we support wakeup from poweroff, we save all regs we can including cfg * space */ @@ -2698,9 +2656,6 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) mdelay(20); OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON)); } - // FIXME: Use PCI layer - for (i = 0; i < 64; ++i) - pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]); pci_disable_device(pdev); } /* If we support D2, we go to it (should be fixed later with a flag forcing @@ -2717,6 +2672,13 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) return 0; } +static int radeon_check_power_loss(struct radeonfb_info *rinfo) +{ + return rinfo->save_regs[4] != INPLL(CLK_PIN_CNTL) || + rinfo->save_regs[2] != INPLL(MCLK_CNTL) || + rinfo->save_regs[3] != INPLL(SCLK_CNTL); +} + int radeonfb_pci_resume(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); @@ -2735,20 +2697,13 @@ int radeonfb_pci_resume(struct pci_dev *pdev) printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n", pci_name(pdev), pdev->dev.power.power_state.event); - - if (pci_enable_device(pdev)) { - rc = -ENODEV; - printk(KERN_ERR "radeonfb (%s): can't enable PCI device !\n", - pci_name(pdev)); - goto bail; - } - pci_set_master(pdev); - + /* PCI state will have been restored by the core, so + * we should be in D0 now with our config space fully + * restored + */ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { - /* Wakeup chip. Check from config space if we were powered off - * (todo: additionally, check CLK_PIN_CNTL too) - */ - if ((rinfo->pm_mode & radeon_pm_off) && radeon_restore_pci_cfg(rinfo)) { + /* Wakeup chip */ + if ((rinfo->pm_mode & radeon_pm_off) && radeon_check_power_loss(rinfo)) { if (rinfo->reinit_func != NULL) rinfo->reinit_func(rinfo); else { diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index 3ea1b00..7351e66 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h @@ -361,8 +361,6 @@ struct radeonfb_info { #ifdef CONFIG_FB_RADEON_I2C struct radeon_i2c_chan i2c[4]; #endif - - u32 cfg_save[64]; }; diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 363b3cb..63d7594 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o -obj-$(CONFIG_BACKLIGHT_DA903X) += da903x.o +obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x_bl.c index 93bb434..93bb434 100644 --- a/drivers/video/backlight/da903x.c +++ b/drivers/video/backlight/da903x_bl.c diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c index 2a423d3..90cfdda 100644 --- a/drivers/video/bfin-t350mcqb-fb.c +++ b/drivers/video/bfin-t350mcqb-fb.c @@ -447,7 +447,7 @@ static irqreturn_t bfin_t350mcqb_irq_error(int irq, void *dev_id) return IRQ_HANDLED; } -static int __init bfin_t350mcqb_probe(struct platform_device *pdev) +static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev) { struct bfin_t350mcqbfb_info *info; struct fb_info *fbinfo; diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c index 91b78e6..f53b9f1 100644 --- a/drivers/video/fbcmap.c +++ b/drivers/video/fbcmap.c @@ -250,10 +250,6 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info) int rc, size = cmap->len * sizeof(u16); struct fb_cmap umap; - if (cmap->start < 0 || (!info->fbops->fb_setcolreg && - !info->fbops->fb_setcmap)) - return -EINVAL; - memset(&umap, 0, sizeof(struct fb_cmap)); rc = fb_alloc_cmap(&umap, cmap->len, cmap->transp != NULL); if (rc) @@ -262,11 +258,23 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info) copy_from_user(umap.green, cmap->green, size) || copy_from_user(umap.blue, cmap->blue, size) || (cmap->transp && copy_from_user(umap.transp, cmap->transp, size))) { - fb_dealloc_cmap(&umap); - return -EFAULT; + rc = -EFAULT; + goto out; } umap.start = cmap->start; + if (!lock_fb_info(info)) { + rc = -ENODEV; + goto out; + } + if (cmap->start < 0 || (!info->fbops->fb_setcolreg && + !info->fbops->fb_setcmap)) { + rc = -EINVAL; + goto out1; + } rc = fb_set_cmap(&umap, info); +out1: + unlock_fb_info(info); +out: fb_dealloc_cmap(&umap); return rc; } diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 756efeb..cfd9dce 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1013,132 +1013,139 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, struct fb_var_screeninfo var; struct fb_fix_screeninfo fix; struct fb_con2fbmap con2fb; + struct fb_cmap cmap_from; struct fb_cmap_user cmap; struct fb_event event; void __user *argp = (void __user *)arg; long ret = 0; - fb = info->fbops; - if (!fb) - return -ENODEV; - switch (cmd) { case FBIOGET_VSCREENINFO: - ret = copy_to_user(argp, &info->var, - sizeof(var)) ? -EFAULT : 0; + if (!lock_fb_info(info)) + return -ENODEV; + var = info->var; + unlock_fb_info(info); + + ret = copy_to_user(argp, &var, sizeof(var)) ? -EFAULT : 0; break; case FBIOPUT_VSCREENINFO: - if (copy_from_user(&var, argp, sizeof(var))) { - ret = -EFAULT; - break; - } + if (copy_from_user(&var, argp, sizeof(var))) + return -EFAULT; + if (!lock_fb_info(info)) + return -ENODEV; acquire_console_sem(); info->flags |= FBINFO_MISC_USEREVENT; ret = fb_set_var(info, &var); info->flags &= ~FBINFO_MISC_USEREVENT; release_console_sem(); - if (ret == 0 && copy_to_user(argp, &var, sizeof(var))) + unlock_fb_info(info); + if (!ret && copy_to_user(argp, &var, sizeof(var))) ret = -EFAULT; break; case FBIOGET_FSCREENINFO: - ret = copy_to_user(argp, &info->fix, - sizeof(fix)) ? -EFAULT : 0; + if (!lock_fb_info(info)) + return -ENODEV; + fix = info->fix; + unlock_fb_info(info); + + ret = copy_to_user(argp, &fix, sizeof(fix)) ? -EFAULT : 0; break; case FBIOPUTCMAP: if (copy_from_user(&cmap, argp, sizeof(cmap))) - ret = -EFAULT; - else - ret = fb_set_user_cmap(&cmap, info); + return -EFAULT; + ret = fb_set_user_cmap(&cmap, info); break; case FBIOGETCMAP: if (copy_from_user(&cmap, argp, sizeof(cmap))) - ret = -EFAULT; - else - ret = fb_cmap_to_user(&info->cmap, &cmap); + return -EFAULT; + if (!lock_fb_info(info)) + return -ENODEV; + cmap_from = info->cmap; + unlock_fb_info(info); + ret = fb_cmap_to_user(&cmap_from, &cmap); break; case FBIOPAN_DISPLAY: - if (copy_from_user(&var, argp, sizeof(var))) { - ret = -EFAULT; - break; - } + if (copy_from_user(&var, argp, sizeof(var))) + return -EFAULT; + if (!lock_fb_info(info)) + return -ENODEV; acquire_console_sem(); ret = fb_pan_display(info, &var); release_console_sem(); + unlock_fb_info(info); if (ret == 0 && copy_to_user(argp, &var, sizeof(var))) - ret = -EFAULT; + return -EFAULT; break; case FBIO_CURSOR: ret = -EINVAL; break; case FBIOGET_CON2FBMAP: if (copy_from_user(&con2fb, argp, sizeof(con2fb))) - ret = -EFAULT; - else if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) - ret = -EINVAL; - else { - con2fb.framebuffer = -1; - event.info = info; - event.data = &con2fb; - fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, - &event); - ret = copy_to_user(argp, &con2fb, - sizeof(con2fb)) ? -EFAULT : 0; - } + return -EFAULT; + if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) + return -EINVAL; + con2fb.framebuffer = -1; + event.data = &con2fb; + + if (!lock_fb_info(info)) + return -ENODEV; + event.info = info; + fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event); + unlock_fb_info(info); + + ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0; break; case FBIOPUT_CON2FBMAP: - if (copy_from_user(&con2fb, argp, sizeof(con2fb))) { - ret = -EFAULT; - break; - } - if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) { - ret = -EINVAL; - break; - } - if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX) { - ret = -EINVAL; - break; - } + if (copy_from_user(&con2fb, argp, sizeof(con2fb))) + return -EFAULT; + if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) + return -EINVAL; + if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX) + return -EINVAL; if (!registered_fb[con2fb.framebuffer]) request_module("fb%d", con2fb.framebuffer); if (!registered_fb[con2fb.framebuffer]) { ret = -EINVAL; break; } - event.info = info; event.data = &con2fb; + if (!lock_fb_info(info)) + return -ENODEV; + event.info = info; ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, &event); + unlock_fb_info(info); break; case FBIOBLANK: + if (!lock_fb_info(info)) + return -ENODEV; acquire_console_sem(); info->flags |= FBINFO_MISC_USEREVENT; ret = fb_blank(info, arg); info->flags &= ~FBINFO_MISC_USEREVENT; release_console_sem(); - break;; + unlock_fb_info(info); + break; default: - if (fb->fb_ioctl == NULL) - ret = -ENOTTY; - else + if (!lock_fb_info(info)) + return -ENODEV; + fb = info->fbops; + if (fb->fb_ioctl) ret = fb->fb_ioctl(info, cmd, arg); + else + ret = -ENOTTY; + unlock_fb_info(info); } return ret; } static long fb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -__acquires(&info->lock) -__releases(&info->lock) { struct inode *inode = file->f_path.dentry->d_inode; int fbidx = iminor(inode); - struct fb_info *info; - long ret; + struct fb_info *info = registered_fb[fbidx]; - info = registered_fb[fbidx]; - mutex_lock(&info->lock); - ret = do_fb_ioctl(info, cmd, arg); - mutex_unlock(&info->lock); - return ret; + return do_fb_ioctl(info, cmd, arg); } #ifdef CONFIG_COMPAT @@ -1257,8 +1264,6 @@ static int fb_get_fscreeninfo(struct fb_info *info, unsigned int cmd, static long fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -__acquires(&info->lock) -__releases(&info->lock) { struct inode *inode = file->f_path.dentry->d_inode; int fbidx = iminor(inode); @@ -1266,7 +1271,6 @@ __releases(&info->lock) struct fb_ops *fb = info->fbops; long ret = -ENOIOCTLCMD; - mutex_lock(&info->lock); switch(cmd) { case FBIOGET_VSCREENINFO: case FBIOPUT_VSCREENINFO: @@ -1292,7 +1296,6 @@ __releases(&info->lock) ret = fb->fb_compat_ioctl(info, cmd, arg); break; } - mutex_unlock(&info->lock); return ret; } #endif diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/geode/gx1fb_core.c index 751e491..f20eff8 100644 --- a/drivers/video/geode/gx1fb_core.c +++ b/drivers/video/geode/gx1fb_core.c @@ -136,13 +136,10 @@ static int gx1fb_set_par(struct fb_info *info) { struct geodefb_par *par = info->par; - if (info->var.bits_per_pixel == 16) { + if (info->var.bits_per_pixel == 16) info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_dealloc_cmap(&info->cmap); - } else { + else info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); - } info->fix.line_length = gx1_line_delta(info->var.xres, info->var.bits_per_pixel); @@ -315,6 +312,10 @@ static struct fb_info * __init gx1fb_init_fbinfo(struct device *dev) if (!par->panel_x) par->enable_crt = 1; /* fall back to CRT if no panel is specified */ + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { + framebuffer_release(info); + return NULL; + } return info; } @@ -374,8 +375,11 @@ static int __init gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id * release_mem_region(gx1_gx_base() + 0x8300, 0x100); } - if (info) + if (info) { + fb_dealloc_cmap(&info->cmap); framebuffer_release(info); + } + return ret; } @@ -395,6 +399,7 @@ static void gx1fb_remove(struct pci_dev *pdev) iounmap(par->dc_regs); release_mem_region(gx1_gx_base() + 0x8300, 0x100); + fb_dealloc_cmap(&info->cmap); pci_set_drvdata(pdev, NULL); framebuffer_release(info); diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c index 4841189..2552cac 100644 --- a/drivers/video/geode/gxfb_core.c +++ b/drivers/video/geode/gxfb_core.c @@ -171,13 +171,10 @@ static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) static int gxfb_set_par(struct fb_info *info) { - if (info->var.bits_per_pixel > 8) { + if (info->var.bits_per_pixel > 8) info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_dealloc_cmap(&info->cmap); - } else { + else info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); - } info->fix.line_length = gx_line_delta(info->var.xres, info->var.bits_per_pixel); @@ -331,6 +328,11 @@ static struct fb_info * __init gxfb_init_fbinfo(struct device *dev) info->var.grayscale = 0; + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { + framebuffer_release(info); + return NULL; + } + return info; } @@ -443,8 +445,10 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i pci_release_region(pdev, 1); } - if (info) + if (info) { + fb_dealloc_cmap(&info->cmap); framebuffer_release(info); + } return ret; } @@ -467,6 +471,7 @@ static void gxfb_remove(struct pci_dev *pdev) iounmap(par->gp_regs); pci_release_region(pdev, 1); + fb_dealloc_cmap(&info->cmap); pci_set_drvdata(pdev, NULL); framebuffer_release(info); diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c index b965ecd..889cbe3 100644 --- a/drivers/video/geode/lxfb_core.c +++ b/drivers/video/geode/lxfb_core.c @@ -278,13 +278,10 @@ static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) static int lxfb_set_par(struct fb_info *info) { - if (info->var.bits_per_pixel > 8) { + if (info->var.bits_per_pixel > 8) info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_dealloc_cmap(&info->cmap); - } else { + else info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); - } info->fix.line_length = lx_get_pitch(info->var.xres, info->var.bits_per_pixel); @@ -451,6 +448,11 @@ static struct fb_info * __init lxfb_init_fbinfo(struct device *dev) info->pseudo_palette = (void *)par + sizeof(struct lxfb_par); + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { + framebuffer_release(info); + return NULL; + } + info->var.grayscale = 0; return info; @@ -579,8 +581,10 @@ err: pci_release_region(pdev, 3); } - if (info) + if (info) { + fb_dealloc_cmap(&info->cmap); framebuffer_release(info); + } return ret; } @@ -604,6 +608,7 @@ static void lxfb_remove(struct pci_dev *pdev) iounmap(par->vp_regs); pci_release_region(pdev, 3); + fb_dealloc_cmap(&info->cmap); pci_set_drvdata(pdev, NULL); framebuffer_release(info); } diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index 2c8dff9..1ed3d55 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -115,7 +115,7 @@ static struct w1_therm_family_converter w1_therm_families[] = { static inline int w1_DS18B20_convert_temp(u8 rom[9]) { - s16 t = (rom[1] << 8) | rom[0]; + int t = ((s16)rom[1] << 8) | rom[0]; t = t*1000/16; return t; } diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 09a3d55..325c10f 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -406,7 +406,7 @@ config ITCO_WDT ---help--- Hardware driver for the intel TCO timer based watchdog devices. These drivers are included in the Intel 82801 I/O Controller - Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB + Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB controller hub. The TCO (Total Cost of Ownership) timer is a watchdog timer diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 5531691..e35d545 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -107,10 +107,10 @@ static int at91_wdt_close(struct inode *inode, struct file *file) static int at91_wdt_settimeout(int new_time) { /* - * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz + * All counting occurs at SLOW_CLOCK / 128 = 256 Hz * * Since WDV is a 16-bit counter, the maximum period is - * 65536 / 0.256 = 256 seconds. + * 65536 / 256 = 256 seconds. */ if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) return -EINVAL; diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index b1da287..a56ac84 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -18,6 +18,7 @@ #include <linux/errno.h> #include <linux/fs.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/miscdevice.h> #include <linux/module.h> diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index 2474ebc..d8264ad 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -1,7 +1,7 @@ /* * intel TCO vendor specific watchdog driver support * - * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,7 +19,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_vendor_support" -#define DRV_VERSION "1.02" +#define DRV_VERSION "1.03" #define PFX DRV_NAME ": " /* Includes */ @@ -77,6 +77,26 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n * 20.6 seconds. */ +static void supermicro_old_pre_start(unsigned long acpibase) +{ + unsigned long val32; + + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); /* Needed to activate watchdog */ +} + +static void supermicro_old_pre_stop(unsigned long acpibase) +{ + unsigned long val32; + + /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ + val32 = inl(SMI_EN); + val32 |= 0x00002000; /* Turn on SMI clearing watchdog */ + outl(val32, SMI_EN); /* Needed to deactivate watchdog */ +} + static void supermicro_old_pre_keepalive(unsigned long acpibase) { /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ @@ -228,14 +248,18 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat) void iTCO_vendor_pre_start(unsigned long acpibase, unsigned int heartbeat) { - if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_start(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_start(heartbeat); } EXPORT_SYMBOL(iTCO_vendor_pre_start); void iTCO_vendor_pre_stop(unsigned long acpibase) { - if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_stop(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_stop(); } EXPORT_SYMBOL(iTCO_vendor_pre_stop); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 5b395a4..3523349 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -1,7 +1,7 @@ /* - * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) + * intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets) * - * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -63,7 +63,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.04" +#define DRV_VERSION "1.05" #define PFX DRV_NAME ": " /* Includes */ @@ -236,16 +236,16 @@ MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); /* Address definitions for the TCO */ /* TCO base address */ -#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 +#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 /* SMI Control and Enable Register */ -#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 +#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 #define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Curr. Value */ #define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */ -#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ -#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ -#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ -#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */ +#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ +#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ +#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ +#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */ #define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */ #define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */ #define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */ @@ -338,7 +338,6 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void) static int iTCO_wdt_start(void) { unsigned int val; - unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -351,11 +350,6 @@ static int iTCO_wdt_start(void) return -EIO; } - /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ - val32 = inl(SMI_EN); - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ - outl(val32, SMI_EN); - /* Force the timer to its reload value by writing to the TCO_RLD register */ if (iTCO_wdt_private.iTCO_version == 2) @@ -378,7 +372,6 @@ static int iTCO_wdt_start(void) static int iTCO_wdt_stop(void) { unsigned int val; - unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -390,11 +383,6 @@ static int iTCO_wdt_stop(void) outw(val, TCO1_CNT); val = inw(TCO1_CNT); - /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ - val32 = inl(SMI_EN); - val32 |= 0x00002000; - outl(val32, SMI_EN); - /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); @@ -649,6 +637,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, int ret; u32 base_address; unsigned long RCBA; + unsigned long val32; /* * Find the ACPI/PM base I/O address which is the base @@ -695,6 +684,10 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, ret = -EIO; goto out; } + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index 9b91617..56892a1 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -45,6 +45,13 @@ static int xen_suspend(void *data) err); return err; } + err = sysdev_suspend(PMSG_SUSPEND); + if (err) { + printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n", + err); + device_power_up(PMSG_RESUME); + return err; + } xen_mm_pin_all(); gnttab_suspend(); @@ -61,6 +68,7 @@ static int xen_suspend(void *data) gnttab_resume(); xen_mm_unpin_all(); + sysdev_resume(); device_power_up(PMSG_RESUME); if (!*cancelled) { |
