diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ide/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/ide/ppc/pmac.c | 125 | ||||
| -rw-r--r-- | drivers/macintosh/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/macintosh/Makefile | 1 | ||||
| -rw-r--r-- | drivers/macintosh/via-pmu-led.c | 144 |
5 files changed, 164 insertions, 126 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index d633081..d1266fe2 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -774,11 +774,18 @@ config BLK_DEV_IDEDMA_PMAC performance. config BLK_DEV_IDE_PMAC_BLINK - bool "Blink laptop LED on drive activity" + bool "Blink laptop LED on drive activity (DEPRECATED)" depends on BLK_DEV_IDE_PMAC && ADB_PMU + select ADB_PMU_LED + select LEDS_TRIGGERS + select LEDS_TRIGGER_IDE_DISK help This option enables the use of the sleep LED as a hard drive activity LED. + This option is deprecated, it only selects ADB_PMU_LED and + LEDS_TRIGGER_IDE_DISK and changes the code in the new led class + device to default to the ide-disk trigger (which should be set + from userspace via sysfs). config BLK_DEV_IDE_SWARM tristate "IDE for Sibyte evaluation boards" diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index ffca8b6..e8ef345 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -421,107 +421,6 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive); #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ /* - * Below is the code for blinking the laptop LED along with hard - * disk activity. - */ - -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - -/* Set to 50ms minimum led-on time (also used to limit frequency - * of requests sent to the PMU - */ -#define PMU_HD_BLINK_TIME (HZ/50) - -static struct adb_request pmu_blink_on, pmu_blink_off; -static spinlock_t pmu_blink_lock; -static unsigned long pmu_blink_stoptime; -static int pmu_blink_ledstate; -static struct timer_list pmu_blink_timer; -static int pmu_ide_blink_enabled; - - -static void -pmu_hd_blink_timeout(unsigned long data) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_blink_lock, flags); - - /* We may have been triggered again in a racy way, check - * that we really want to switch it off - */ - if (time_after(pmu_blink_stoptime, jiffies)) - goto done; - - /* Previous req. not complete, try 100ms more */ - if (pmu_blink_off.complete == 0) - mod_timer(&pmu_blink_timer, jiffies + PMU_HD_BLINK_TIME); - else if (pmu_blink_ledstate) { - pmu_request(&pmu_blink_off, NULL, 4, 0xee, 4, 0, 0); - pmu_blink_ledstate = 0; - } -done: - spin_unlock_irqrestore(&pmu_blink_lock, flags); -} - -static void -pmu_hd_kick_blink(void *data, int rw) -{ - unsigned long flags; - - pmu_blink_stoptime = jiffies + PMU_HD_BLINK_TIME; - wmb(); - mod_timer(&pmu_blink_timer, pmu_blink_stoptime); - /* Fast path when LED is already ON */ - if (pmu_blink_ledstate == 1) - return; - spin_lock_irqsave(&pmu_blink_lock, flags); - if (pmu_blink_on.complete && !pmu_blink_ledstate) { - pmu_request(&pmu_blink_on, NULL, 4, 0xee, 4, 0, 1); - pmu_blink_ledstate = 1; - } - spin_unlock_irqrestore(&pmu_blink_lock, flags); -} - -static int -pmu_hd_blink_init(void) -{ - struct device_node *dt; - const char *model; - - /* Currently, I only enable this feature on KeyLargo based laptops, - * older laptops may support it (at least heathrow/paddington) but - * I don't feel like loading those venerable old machines with so - * much additional interrupt & PMU activity... - */ - if (pmu_get_model() != PMU_KEYLARGO_BASED) - return 0; - - dt = of_find_node_by_path("/"); - if (dt == NULL) - return 0; - model = (const char *)get_property(dt, "model", NULL); - if (model == NULL) - return 0; - if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 && - strncmp(model, "iBook", strlen("iBook")) != 0) { - of_node_put(dt); - return 0; - } - of_node_put(dt); - - pmu_blink_on.complete = 1; - pmu_blink_off.complete = 1; - spin_lock_init(&pmu_blink_lock); - init_timer(&pmu_blink_timer); - pmu_blink_timer.function = pmu_hd_blink_timeout; - - return 1; -} - -#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */ - -/* * N.B. this can't be an initfunc, because the media-bay task can * call ide_[un]register at any time. */ @@ -1192,23 +1091,6 @@ pmac_ide_do_suspend(ide_hwif_t *hwif) pmif->timings[0] = 0; pmif->timings[1] = 0; -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - /* Note: This code will be called for every hwif, thus we'll - * try several time to stop the LED blinker timer, but that - * should be harmless - */ - if (pmu_ide_blink_enabled) { - unsigned long flags; - - /* Make sure we don't hit the PMU blink */ - spin_lock_irqsave(&pmu_blink_lock, flags); - if (pmu_blink_ledstate) - del_timer(&pmu_blink_timer); - pmu_blink_ledstate = 0; - spin_unlock_irqrestore(&pmu_blink_lock, flags); - } -#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */ - disable_irq(pmif->irq); /* The media bay will handle itself just fine */ @@ -1376,13 +1258,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->selectproc = pmac_ide_selectproc; hwif->speedproc = pmac_ide_tune_chipset; -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - pmu_ide_blink_enabled = pmu_hd_blink_init(); - - if (pmu_ide_blink_enabled) - hwif->led_act = pmu_hd_kick_blink; -#endif - printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, pmif->mediabay ? " (mediabay)" : "", hwif->irq); diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 37cd6ee..062dac2 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -78,6 +78,17 @@ config ADB_PMU this device; you should do so if your machine is one of those mentioned above. +config ADB_PMU_LED + bool "Support for the Power/iBook front LED" + depends on ADB_PMU + select LEDS_CLASS + help + Support the front LED on Power/iBooks as a generic LED that can + be triggered by any of the supported triggers. To get the + behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this + and the ide-disk LED trigger and configure appropriately through + sysfs. + config PMAC_SMU bool "Support for SMU based PowerMacs" depends on PPC_PMAC64 diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile index 45a268f..b53d45f 100644 --- a/drivers/macintosh/Makefile +++ b/drivers/macintosh/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_INPUT_ADBHID) += adbhid.o obj-$(CONFIG_ANSLCD) += ans-lcd.o obj-$(CONFIG_ADB_PMU) += via-pmu.o via-pmu-event.o +obj-$(CONFIG_ADB_PMU_LED) += via-pmu-led.o obj-$(CONFIG_PMAC_BACKLIGHT) += via-pmu-backlight.o obj-$(CONFIG_ADB_CUDA) += via-cuda.o obj-$(CONFIG_PMAC_APM_EMU) += apm_emu.o diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c new file mode 100644 index 0000000..af8375ed --- /dev/null +++ b/drivers/macintosh/via-pmu-led.c @@ -0,0 +1,144 @@ +/* + * via-pmu LED class device + * + * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/leds.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <asm/prom.h> + +static spinlock_t pmu_blink_lock; +static struct adb_request pmu_blink_req; +/* -1: no change, 0: request off, 1: request on */ +static int requested_change; +static int sleeping; + +static void pmu_req_done(struct adb_request * req) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + /* if someone requested a change in the meantime + * (we only see the last one which is fine) + * then apply it now */ + if (requested_change != -1 && !sleeping) + pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change); + /* reset requested change */ + requested_change = -1; + spin_unlock_irqrestore(&pmu_blink_lock, flags); +} + +static void pmu_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + switch (brightness) { + case LED_OFF: + requested_change = 0; + break; + case LED_FULL: + requested_change = 1; + break; + default: + goto out; + break; + } + /* if request isn't done, then don't do anything */ + if (pmu_blink_req.complete && !sleeping) + pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change); + out: + spin_unlock_irqrestore(&pmu_blink_lock, flags); +} + +static struct led_classdev pmu_led = { + .name = "pmu-front-led", +#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK + .default_trigger = "ide-disk", +#endif + .brightness_set = pmu_led_set, +}; + +#ifdef CONFIG_PM +static int pmu_led_sleep_call(struct pmu_sleep_notifier *self, int when) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + + switch (when) { + case PBOOK_SLEEP_REQUEST: + sleeping = 1; + break; + case PBOOK_WAKE: + sleeping = 0; + break; + default: + /* do nothing */ + break; + } + spin_unlock_irqrestore(&pmu_blink_lock, flags); + + return PBOOK_SLEEP_OK; +} + +static struct pmu_sleep_notifier via_pmu_led_sleep_notif = { + .notifier_call = pmu_led_sleep_call, +}; +#endif + +static int __init via_pmu_led_init(void) +{ + struct device_node *dt; + const char *model; + + /* only do this on keylargo based models */ + if (pmu_get_model() != PMU_KEYLARGO_BASED) + return -ENODEV; + + dt = of_find_node_by_path("/"); + if (dt == NULL) + return -ENODEV; + model = (const char *)get_property(dt, "model", NULL); + if (model == NULL) + return -ENODEV; + if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 && + strncmp(model, "iBook", strlen("iBook")) != 0) { + of_node_put(dt); + /* ignore */ + return -ENODEV; + } + of_node_put(dt); + + spin_lock_init(&pmu_blink_lock); + /* no outstanding req */ + pmu_blink_req.complete = 1; + pmu_blink_req.done = pmu_req_done; +#ifdef CONFIG_PM + pmu_register_sleep_notifier(&via_pmu_led_sleep_notif); +#endif + return led_classdev_register(NULL, &pmu_led); +} + +late_initcall(via_pmu_led_init); |
