diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/net/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/oaknet.c | 666 |
3 files changed, 0 insertions, 678 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 555b3ad..01ddcbc 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -235,16 +235,6 @@ config BMAC To compile this driver as a module, choose M here: the module will be called bmac. -config OAKNET - tristate "National DP83902AV (Oak ethernet) support" - depends on NET_ETHERNET && PPC && BROKEN - select CRC32 - help - Say Y if your machine has this type of Ethernet network card. - - To compile this driver as a module, choose M here: the module - will be called oaknet. - config ARIADNE tristate "Ariadne support" depends on NET_ETHERNET && ZORRO diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 88b6336..9a86ebf 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -37,8 +37,6 @@ obj-$(CONFIG_CASSINI) += cassini.o obj-$(CONFIG_MACE) += mace.o obj-$(CONFIG_BMAC) += bmac.o -obj-$(CONFIG_OAKNET) += oaknet.o 8390.o - obj-$(CONFIG_DGRS) += dgrs.o obj-$(CONFIG_VORTEX) += 3c59x.o obj-$(CONFIG_TYPHOON) += typhoon.o diff --git a/drivers/net/oaknet.c b/drivers/net/oaknet.c deleted file mode 100644 index 702e3e9..0000000 --- a/drivers/net/oaknet.c +++ /dev/null @@ -1,666 +0,0 @@ -/* - * - * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> - * - * Module name: oaknet.c - * - * Description: - * Driver for the National Semiconductor DP83902AV Ethernet controller - * on-board the IBM PowerPC "Oak" evaluation board. Adapted from the - * various other 8390 drivers written by Donald Becker and Paul Gortmaker. - * - * Additional inspiration from the "tcd8390.c" driver from TiVo, Inc. - * and "enetLib.c" from IBM. - * - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/jiffies.h> - -#include <asm/board.h> -#include <asm/io.h> - -#include "8390.h" - - -/* Preprocessor Defines */ - -#if !defined(TRUE) || TRUE != 1 -#define TRUE 1 -#endif - -#if !defined(FALSE) || FALSE != 0 -#define FALSE 0 -#endif - -#define OAKNET_START_PG 0x20 /* First page of TX buffer */ -#define OAKNET_STOP_PG 0x40 /* Last pagge +1 of RX ring */ - -#define OAKNET_WAIT (2 * HZ / 100) /* 20 ms */ - -/* Experimenting with some fixes for a broken driver... */ - -#define OAKNET_DISINT -#define OAKNET_HEADCHECK -#define OAKNET_RWFIX - - -/* Global Variables */ - -static const char *name = "National DP83902AV"; - -static struct net_device *oaknet_devs; - - -/* Function Prototypes */ - -static int oaknet_open(struct net_device *dev); -static int oaknet_close(struct net_device *dev); - -static void oaknet_reset_8390(struct net_device *dev); -static void oaknet_get_8390_hdr(struct net_device *dev, - struct e8390_pkt_hdr *hdr, int ring_page); -static void oaknet_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void oaknet_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); - -static void oaknet_dma_error(struct net_device *dev, const char *name); - - -/* - * int oaknet_init() - * - * Description: - * This routine performs all the necessary platform-specific initiali- - * zation and set-up for the IBM "Oak" evaluation board's National - * Semiconductor DP83902AV "ST-NIC" Ethernet controller. - * - * Input(s): - * N/A - * - * Output(s): - * N/A - * - * Returns: - * 0 if OK, otherwise system error number on error. - * - */ -static int __init oaknet_init(void) -{ - register int i; - int reg0, regd; - int ret = -ENOMEM; - struct net_device *dev; -#if 0 - unsigned long ioaddr = OAKNET_IO_BASE; -#else - unsigned long ioaddr = ioremap(OAKNET_IO_BASE, OAKNET_IO_SIZE); -#endif - bd_t *bip = (bd_t *)__res; - - if (!ioaddr) - return -ENOMEM; - - dev = alloc_ei_netdev(); - if (!dev) - goto out_unmap; - - ret = -EBUSY; - if (!request_region(OAKNET_IO_BASE, OAKNET_IO_SIZE, name)) - goto out_dev; - - /* Quick register check to see if the device is really there. */ - - ret = -ENODEV; - if ((reg0 = ei_ibp(ioaddr)) == 0xFF) - goto out_region; - - /* - * That worked. Now a more thorough check, using the multicast - * address registers, that the device is definitely out there - * and semi-functional. - */ - - ei_obp(E8390_NODMA + E8390_PAGE1 + E8390_STOP, ioaddr + E8390_CMD); - regd = ei_ibp(ioaddr + 0x0D); - ei_obp(0xFF, ioaddr + 0x0D); - ei_obp(E8390_NODMA + E8390_PAGE0, ioaddr + E8390_CMD); - ei_ibp(ioaddr + EN0_COUNTER0); - - /* It's no good. Fix things back up and leave. */ - - ret = -ENODEV; - if (ei_ibp(ioaddr + EN0_COUNTER0) != 0) { - ei_obp(reg0, ioaddr); - ei_obp(regd, ioaddr + 0x0D); - goto out_region; - } - - SET_MODULE_OWNER(dev); - - /* - * This controller is on an embedded board, so the base address - * and interrupt assignments are pre-assigned and unchageable. - */ - - dev->base_addr = ioaddr; - dev->irq = OAKNET_INT; - - /* - * Disable all chip interrupts for now and ACK all pending - * interrupts. - */ - - ei_obp(0x0, ioaddr + EN0_IMR); - ei_obp(0xFF, ioaddr + EN0_ISR); - - /* Attempt to get the interrupt line */ - - ret = -EAGAIN; - if (request_irq(dev->irq, ei_interrupt, 0, name, dev)) { - printk("%s: unable to request interrupt %d.\n", - name, dev->irq); - goto out_region; - } - - /* Tell the world about what and where we've found. */ - - printk("%s: %s at", dev->name, name); - for (i = 0; i < ETHER_ADDR_LEN; ++i) { - dev->dev_addr[i] = bip->bi_enetaddr[i]; - printk("%c%.2x", (i ? ':' : ' '), dev->dev_addr[i]); - } - printk(", found at %#lx, using IRQ %d.\n", dev->base_addr, dev->irq); - - /* Set up some required driver fields and then we're done. */ - - ei_status.name = name; - ei_status.word16 = FALSE; - ei_status.tx_start_page = OAKNET_START_PG; - ei_status.rx_start_page = OAKNET_START_PG + TX_PAGES; - ei_status.stop_page = OAKNET_STOP_PG; - - ei_status.reset_8390 = &oaknet_reset_8390; - ei_status.block_input = &oaknet_block_input; - ei_status.block_output = &oaknet_block_output; - ei_status.get_8390_hdr = &oaknet_get_8390_hdr; - - dev->open = oaknet_open; - dev->stop = oaknet_close; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; -#endif - - NS8390_init(dev, FALSE); - ret = register_netdev(dev); - if (ret) - goto out_irq; - - oaknet_devs = dev; - return 0; - -out_irq; - free_irq(dev->irq, dev); -out_region: - release_region(OAKNET_IO_BASE, OAKNET_IO_SIZE); -out_dev: - free_netdev(dev); -out_unmap: - iounmap(ioaddr); - return ret; -} - -/* - * static int oaknet_open() - * - * Description: - * This routine is a modest wrapper around ei_open, the 8390-generic, - * driver open routine. This just increments the module usage count - * and passes along the status from ei_open. - * - * Input(s): - * *dev - Pointer to the device structure for this driver. - * - * Output(s): - * *dev - Pointer to the device structure for this driver, potentially - * modified by ei_open. - * - * Returns: - * 0 if OK, otherwise < 0 on error. - * - */ -static int -oaknet_open(struct net_device *dev) -{ - int status = ei_open(dev); - return (status); -} - -/* - * static int oaknet_close() - * - * Description: - * This routine is a modest wrapper around ei_close, the 8390-generic, - * driver close routine. This just decrements the module usage count - * and passes along the status from ei_close. - * - * Input(s): - * *dev - Pointer to the device structure for this driver. - * - * Output(s): - * *dev - Pointer to the device structure for this driver, potentially - * modified by ei_close. - * - * Returns: - * 0 if OK, otherwise < 0 on error. - * - */ -static int -oaknet_close(struct net_device *dev) -{ - int status = ei_close(dev); - return (status); -} - -/* - * static void oaknet_reset_8390() - * - * Description: - * This routine resets the DP83902 chip. - * - * Input(s): - * *dev - Pointer to the device structure for this driver. - * - * Output(s): - * N/A - * - * Returns: - * N/A - * - */ -static void -oaknet_reset_8390(struct net_device *dev) -{ - int base = E8390_BASE; - - /* - * We have no provision of reseting the controller as is done - * in other drivers, such as "ne.c". However, the following - * seems to work well enough in the TiVo driver. - */ - - printk("Resetting %s...\n", dev->name); - ei_obp(E8390_STOP | E8390_NODMA | E8390_PAGE0, base + E8390_CMD); - ei_status.txing = 0; - ei_status.dmaing = 0; -} - -/* - * static void oaknet_get_8390_hdr() - * - * Description: - * This routine grabs the 8390-specific header. It's similar to the - * block input routine, but we don't need to be concerned with ring wrap - * as the header will be at the start of a page, so we optimize accordingly. - * - * Input(s): - * *dev - Pointer to the device structure for this driver. - * *hdr - Pointer to storage for the 8390-specific packet header. - * ring_page - ? - * - * Output(s): - * *hdr - Pointer to the 8390-specific packet header for the just- - * received frame. - * - * Returns: - * N/A - * - */ -static void -oaknet_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page) -{ - int base = dev->base_addr; - - /* - * This should NOT happen. If it does, it is the LAST thing you'll - * see. - */ - - if (ei_status.dmaing) { - oaknet_dma_error(dev, "oaknet_get_8390_hdr"); - return; - } - - ei_status.dmaing |= 0x01; - outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START, base + OAKNET_CMD); - outb_p(sizeof(struct e8390_pkt_hdr), base + EN0_RCNTLO); - outb_p(0, base + EN0_RCNTHI); - outb_p(0, base + EN0_RSARLO); /* On page boundary */ - outb_p(ring_page, base + EN0_RSARHI); - outb_p(E8390_RREAD + E8390_START, base + OAKNET_CMD); - - if (ei_status.word16) - insw(base + OAKNET_DATA, hdr, - sizeof(struct e8390_pkt_hdr) >> 1); - else - insb(base + OAKNET_DATA, hdr, - sizeof(struct e8390_pkt_hdr)); - - /* Byte-swap the packet byte count */ - - hdr->count = le16_to_cpu(hdr->count); - - outb_p(ENISR_RDC, base + EN0_ISR); /* ACK Remote DMA interrupt */ - ei_status.dmaing &= ~0x01; -} - -/* - * XXX - Document me. - */ -static void -oaknet_block_input(struct net_device *dev, int count, struct sk_buff *skb, - int ring_offset) -{ - int base = OAKNET_BASE; - char *buf = skb->data; - - /* - * This should NOT happen. If it does, it is the LAST thing you'll - * see. - */ - - if (ei_status.dmaing) { - oaknet_dma_error(dev, "oaknet_block_input"); - return; - } - -#ifdef OAKNET_DISINT - save_flags(flags); - cli(); -#endif - - ei_status.dmaing |= 0x01; - ei_obp(E8390_NODMA + E8390_PAGE0 + E8390_START, base + E8390_CMD); - ei_obp(count & 0xff, base + EN0_RCNTLO); - ei_obp(count >> 8, base + EN0_RCNTHI); - ei_obp(ring_offset & 0xff, base + EN0_RSARLO); - ei_obp(ring_offset >> 8, base + EN0_RSARHI); - ei_obp(E8390_RREAD + E8390_START, base + E8390_CMD); - if (ei_status.word16) { - ei_isw(base + E8390_DATA, buf, count >> 1); - if (count & 0x01) { - buf[count - 1] = ei_ib(base + E8390_DATA); -#ifdef OAKNET_HEADCHECK - bytes++; -#endif - } - } else { - ei_isb(base + E8390_DATA, buf, count); - } -#ifdef OAKNET_HEADCHECK - /* - * This was for the ALPHA version only, but enough people have - * been encountering problems so it is still here. If you see - * this message you either 1) have a slightly incompatible clone - * or 2) have noise/speed problems with your bus. - */ - - /* DMA termination address check... */ - { - int addr, tries = 20; - do { - /* DON'T check for 'ei_ibp(EN0_ISR) & ENISR_RDC' here - -- it's broken for Rx on some cards! */ - int high = ei_ibp(base + EN0_RSARHI); - int low = ei_ibp(base + EN0_RSARLO); - addr = (high << 8) + low; - if (((ring_offset + bytes) & 0xff) == low) - break; - } while (--tries > 0); - if (tries <= 0) - printk("%s: RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, ring_offset + bytes, addr); - } -#endif - ei_obp(ENISR_RDC, base + EN0_ISR); /* ACK Remote DMA interrupt */ - ei_status.dmaing &= ~0x01; - -#ifdef OAKNET_DISINT - restore_flags(flags); -#endif -} - -/* - * static void oaknet_block_output() - * - * Description: - * This routine... - * - * Input(s): - * *dev - Pointer to the device structure for this driver. - * count - Number of bytes to be transferred. - * *buf - - * start_page - - * - * Output(s): - * N/A - * - * Returns: - * N/A - * - */ -static void -oaknet_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - int base = E8390_BASE; -#if 0 - int bug; -#endif - unsigned long start; -#ifdef OAKNET_DISINT - unsigned long flags; -#endif -#ifdef OAKNET_HEADCHECK - int retries = 0; -#endif - - /* Round the count up for word writes. */ - - if (ei_status.word16 && (count & 0x1)) - count++; - - /* - * This should NOT happen. If it does, it is the LAST thing you'll - * see. - */ - - if (ei_status.dmaing) { - oaknet_dma_error(dev, "oaknet_block_output"); - return; - } - -#ifdef OAKNET_DISINT - save_flags(flags); - cli(); -#endif - - ei_status.dmaing |= 0x01; - - /* Make sure we are in page 0. */ - - ei_obp(E8390_PAGE0 + E8390_START + E8390_NODMA, base + E8390_CMD); - -#ifdef OAKNET_HEADCHECK -retry: -#endif - -#if 0 - /* - * The 83902 documentation states that the processor needs to - * do a "dummy read" before doing the remote write to work - * around a chip bug they don't feel like fixing. - */ - - bug = 0; - while (1) { - unsigned int rdhi; - unsigned int rdlo; - - /* Now the normal output. */ - ei_obp(ENISR_RDC, base + EN0_ISR); - ei_obp(count & 0xff, base + EN0_RCNTLO); - ei_obp(count >> 8, base + EN0_RCNTHI); - ei_obp(0x00, base + EN0_RSARLO); - ei_obp(start_page, base + EN0_RSARHI); - - if (bug++) - break; - - /* Perform the dummy read */ - rdhi = ei_ibp(base + EN0_CRDAHI); - rdlo = ei_ibp(base + EN0_CRDALO); - ei_obp(E8390_RREAD + E8390_START, base + E8390_CMD); - - while (1) { - unsigned int nrdhi; - unsigned int nrdlo; - nrdhi = ei_ibp(base + EN0_CRDAHI); - nrdlo = ei_ibp(base + EN0_CRDALO); - if ((rdhi != nrdhi) || (rdlo != nrdlo)) - break; - } - } -#else -#ifdef OAKNET_RWFIX - /* - * Handle the read-before-write bug the same way as the - * Crynwr packet driver -- the Nat'l Semi. method doesn't work. - * Actually this doesn't always work either, but if you have - * problems with your 83902 this is better than nothing! - */ - - ei_obp(0x42, base + EN0_RCNTLO); - ei_obp(0x00, base + EN0_RCNTHI); - ei_obp(0x42, base + EN0_RSARLO); - ei_obp(0x00, base + EN0_RSARHI); - ei_obp(E8390_RREAD + E8390_START, base + E8390_CMD); - /* Make certain that the dummy read has occurred. */ - udelay(6); -#endif - - ei_obp(ENISR_RDC, base + EN0_ISR); - - /* Now the normal output. */ - ei_obp(count & 0xff, base + EN0_RCNTLO); - ei_obp(count >> 8, base + EN0_RCNTHI); - ei_obp(0x00, base + EN0_RSARLO); - ei_obp(start_page, base + EN0_RSARHI); -#endif /* 0/1 */ - - ei_obp(E8390_RWRITE + E8390_START, base + E8390_CMD); - if (ei_status.word16) { - ei_osw(E8390_BASE + E8390_DATA, buf, count >> 1); - } else { - ei_osb(E8390_BASE + E8390_DATA, buf, count); - } - -#ifdef OAKNET_DISINT - restore_flags(flags); -#endif - - start = jiffies; - -#ifdef OAKNET_HEADCHECK - /* - * This was for the ALPHA version only, but enough people have - * been encountering problems so it is still here. - */ - - { - /* DMA termination address check... */ - int addr, tries = 20; - do { - int high = ei_ibp(base + EN0_RSARHI); - int low = ei_ibp(base + EN0_RSARLO); - addr = (high << 8) + low; - if ((start_page << 8) + count == addr) - break; - } while (--tries > 0); - - if (tries <= 0) { - printk("%s: Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, (start_page << 8) + count, addr); - if (retries++ == 0) - goto retry; - } - } -#endif - - while ((ei_ibp(base + EN0_ISR) & ENISR_RDC) == 0) { - if (time_after(jiffies, start + OAKNET_WAIT)) { - printk("%s: timeout waiting for Tx RDC.\n", dev->name); - oaknet_reset_8390(dev); - NS8390_init(dev, TRUE); - break; - } - } - - ei_obp(ENISR_RDC, base + EN0_ISR); /* Ack intr. */ - ei_status.dmaing &= ~0x01; -} - -/* - * static void oaknet_dma_error() - * - * Description: - * This routine prints out a last-ditch informative message to the console - * indicating that a DMA error occurred. If you see this, it's the last - * thing you'll see. - * - * Input(s): - * *dev - Pointer to the device structure for this driver. - * *name - Informative text (e.g. function name) indicating where the - * DMA error occurred. - * - * Output(s): - * N/A - * - * Returns: - * N/A - * - */ -static void -oaknet_dma_error(struct net_device *dev, const char *name) -{ - printk(KERN_EMERG "%s: DMAing conflict in %s." - "[DMAstat:%d][irqlock:%d][intr:%ld]\n", - dev->name, name, ei_status.dmaing, ei_status.irqlock, - dev->interrupt); -} - -/* - * Oak Ethernet module unload interface. - */ -static void __exit oaknet_cleanup_module (void) -{ - /* Convert to loop once driver supports multiple devices. */ - unregister_netdev(oaknet_dev); - free_irq(oaknet_devs->irq, oaknet_devs); - release_region(oaknet_devs->base_addr, OAKNET_IO_SIZE); - iounmap(ioaddr); - free_netdev(oaknet_devs); -} - -module_init(oaknet_init); -module_exit(oaknet_cleanup_module); -MODULE_LICENSE("GPL"); |
