summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/Kconfig6
-rw-r--r--drivers/net/arm/ep93xx_eth.c40
-rw-r--r--drivers/net/ehea/ehea_main.c11
-rw-r--r--drivers/net/irda/stir4200.c3
-rw-r--r--drivers/net/myri10ge/myri10ge.c1
-rw-r--r--drivers/net/s2io.c11
-rw-r--r--drivers/net/skge.c3
-rw-r--r--drivers/net/sky2.c9
-rw-r--r--drivers/net/tokenring/proteon.c9
-rw-r--r--drivers/net/tokenring/skisa.c9
-rw-r--r--drivers/net/wan/n2.c6
11 files changed, 53 insertions, 55 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e38846e..28c17d1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2112,7 +2112,7 @@ config SKGE
config SKY2
tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI
select CRC32
---help---
This driver supports Gigabit Ethernet adapters based on the
@@ -2120,8 +2120,8 @@ config SKY2
Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
- This driver does not support the original Yukon chipset: a seperate
- driver, skge, is provided for Yukon-based adapters.
+ There is companion driver for the older Marvell Yukon and
+ Genesis based adapters: skge.
To compile this driver as a module, choose M here: the module
will be called sky2. This is recommended.
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 127561c..8ebd68e 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -193,12 +193,9 @@ static struct net_device_stats *ep93xx_get_stats(struct net_device *dev)
static int ep93xx_rx(struct net_device *dev, int *budget)
{
struct ep93xx_priv *ep = netdev_priv(dev);
- int tail_offset;
int rx_done;
int processed;
- tail_offset = rdl(ep, REG_RXSTSQCURADD) - ep->descs_dma_addr;
-
rx_done = 0;
processed = 0;
while (*budget > 0) {
@@ -211,36 +208,28 @@ static int ep93xx_rx(struct net_device *dev, int *budget)
entry = ep->rx_pointer;
rstat = ep->descs->rstat + entry;
- if ((void *)rstat - (void *)ep->descs == tail_offset) {
+
+ rstat0 = rstat->rstat0;
+ rstat1 = rstat->rstat1;
+ if (!(rstat0 & RSTAT0_RFP) || !(rstat1 & RSTAT1_RFP)) {
rx_done = 1;
break;
}
- rstat0 = rstat->rstat0;
- rstat1 = rstat->rstat1;
rstat->rstat0 = 0;
rstat->rstat1 = 0;
- if (!(rstat0 & RSTAT0_RFP))
- printk(KERN_CRIT "ep93xx_rx: buffer not done "
- " %.8x %.8x\n", rstat0, rstat1);
if (!(rstat0 & RSTAT0_EOF))
printk(KERN_CRIT "ep93xx_rx: not end-of-frame "
" %.8x %.8x\n", rstat0, rstat1);
if (!(rstat0 & RSTAT0_EOB))
printk(KERN_CRIT "ep93xx_rx: not end-of-buffer "
" %.8x %.8x\n", rstat0, rstat1);
- if (!(rstat1 & RSTAT1_RFP))
- printk(KERN_CRIT "ep93xx_rx: buffer1 not done "
- " %.8x %.8x\n", rstat0, rstat1);
if ((rstat1 & RSTAT1_BUFFER_INDEX) >> 16 != entry)
printk(KERN_CRIT "ep93xx_rx: entry mismatch "
" %.8x %.8x\n", rstat0, rstat1);
if (!(rstat0 & RSTAT0_RWE)) {
- printk(KERN_NOTICE "ep93xx_rx: receive error "
- " %.8x %.8x\n", rstat0, rstat1);
-
ep->stats.rx_errors++;
if (rstat0 & RSTAT0_OE)
ep->stats.rx_fifo_errors++;
@@ -301,13 +290,8 @@ err:
static int ep93xx_have_more_rx(struct ep93xx_priv *ep)
{
- struct ep93xx_rstat *rstat;
- int tail_offset;
-
- rstat = ep->descs->rstat + ep->rx_pointer;
- tail_offset = rdl(ep, REG_RXSTSQCURADD) - ep->descs_dma_addr;
-
- return !((void *)rstat - (void *)ep->descs == tail_offset);
+ struct ep93xx_rstat *rstat = ep->descs->rstat + ep->rx_pointer;
+ return !!((rstat->rstat0 & RSTAT0_RFP) && (rstat->rstat1 & RSTAT1_RFP));
}
static int ep93xx_poll(struct net_device *dev, int *budget)
@@ -347,7 +331,7 @@ static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev)
struct ep93xx_priv *ep = netdev_priv(dev);
int entry;
- if (unlikely(skb->len) > MAX_PKT_SIZE) {
+ if (unlikely(skb->len > MAX_PKT_SIZE)) {
ep->stats.tx_dropped++;
dev_kfree_skb(skb);
return NETDEV_TX_OK;
@@ -379,10 +363,8 @@ static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev)
static void ep93xx_tx_complete(struct net_device *dev)
{
struct ep93xx_priv *ep = netdev_priv(dev);
- int tail_offset;
int wake;
- tail_offset = rdl(ep, REG_TXSTSQCURADD) - ep->descs_dma_addr;
wake = 0;
spin_lock(&ep->tx_pending_lock);
@@ -393,15 +375,13 @@ static void ep93xx_tx_complete(struct net_device *dev)
entry = ep->tx_clean_pointer;
tstat = ep->descs->tstat + entry;
- if ((void *)tstat - (void *)ep->descs == tail_offset)
- break;
tstat0 = tstat->tstat0;
+ if (!(tstat0 & TSTAT0_TXFP))
+ break;
+
tstat->tstat0 = 0;
- if (!(tstat0 & TSTAT0_TXFP))
- printk(KERN_CRIT "ep93xx_tx_complete: buffer not done "
- " %.8x\n", tstat0);
if (tstat0 & TSTAT0_FA)
printk(KERN_CRIT "ep93xx_tx_complete: frame aborted "
" %.8x\n", tstat0);
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index eb7d44d..4538c99 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -586,8 +586,8 @@ int ehea_sense_port_attr(struct ehea_port *port)
u64 hret;
struct hcp_ehea_port_cb0 *cb0;
- cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
- if (!cb0) {
+ cb0 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC); /* May be called via */
+ if (!cb0) { /* ehea_neq_tasklet() */
ehea_error("no mem for cb0");
ret = -ENOMEM;
goto out;
@@ -765,8 +765,7 @@ static void ehea_parse_eqe(struct ehea_adapter *adapter, u64 eqe)
if (EHEA_BMASK_GET(NEQE_PORT_UP, eqe)) {
if (!netif_carrier_ok(port->netdev)) {
- ret = ehea_sense_port_attr(
- port);
+ ret = ehea_sense_port_attr(port);
if (ret) {
ehea_error("failed resensing port "
"attributes");
@@ -1502,7 +1501,7 @@ static void ehea_promiscuous(struct net_device *dev, int enable)
if ((enable && port->promisc) || (!enable && !port->promisc))
return;
- cb7 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb7 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC);
if (!cb7) {
ehea_error("no mem for cb7");
goto out;
@@ -1606,7 +1605,7 @@ static void ehea_add_multicast_entry(struct ehea_port* port, u8* mc_mac_addr)
struct ehea_mc_list *ehea_mcl_entry;
u64 hret;
- ehea_mcl_entry = kzalloc(sizeof(*ehea_mcl_entry), GFP_KERNEL);
+ ehea_mcl_entry = kzalloc(sizeof(*ehea_mcl_entry), GFP_ATOMIC);
if (!ehea_mcl_entry) {
ehea_error("no mem for mcl_entry");
return;
diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
index be8a66e..3b4c478 100644
--- a/drivers/net/irda/stir4200.c
+++ b/drivers/net/irda/stir4200.c
@@ -15,8 +15,7 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
+* the Free Software Foundation; either version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index fdbb0d7..806081b 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -2416,7 +2416,6 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
* firmware image, and set tx.boundary to 4KB.
*/
-#define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE 0x0132
#define PCI_DEVICE_ID_INTEL_E5000_PCIE23 0x25f7
#define PCI_DEVICE_ID_INTEL_E5000_PCIE47 0x25fa
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index a231ab7..33569ec 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -5985,6 +5985,11 @@ static int set_rxd_buffer_pointer(nic_t *sp, RxD_t *rxdp, buffAdd_t *ba,
((RxD3_t*)rxdp)->Buffer1_ptr = *temp1;
} else {
*skb = dev_alloc_skb(size);
+ if (!(*skb)) {
+ DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n",
+ dev->name);
+ return -ENOMEM;
+ }
((RxD3_t*)rxdp)->Buffer2_ptr = *temp2 =
pci_map_single(sp->pdev, (*skb)->data,
dev->mtu + 4,
@@ -6007,7 +6012,11 @@ static int set_rxd_buffer_pointer(nic_t *sp, RxD_t *rxdp, buffAdd_t *ba,
((RxD3_t*)rxdp)->Buffer2_ptr = *temp2;
} else {
*skb = dev_alloc_skb(size);
-
+ if (!(*skb)) {
+ DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n",
+ dev->name);
+ return -ENOMEM;
+ }
((RxD3_t*)rxdp)->Buffer0_ptr = *temp0 =
pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN,
PCI_DMA_FROMDEVICE);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index e7e4149..b294903 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -11,8 +11,7 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 95efdb5..16616f5 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -10,8 +10,7 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -3239,7 +3238,11 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
dev->poll = sky2_poll;
dev->weight = NAPI_WEIGHT;
#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = sky2_netpoll;
+ /* Network console (only works on port 0)
+ * because netpoll makes assumptions about NAPI
+ */
+ if (port == 0)
+ dev->poll_controller = sky2_netpoll;
#endif
sky2 = netdev_priv(dev);
diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c
index 4f75696..cb7dbb6 100644
--- a/drivers/net/tokenring/proteon.c
+++ b/drivers/net/tokenring/proteon.c
@@ -370,6 +370,10 @@ static int __init proteon_init(void)
dev->dma = dma[i];
pdev = platform_device_register_simple("proteon",
i, NULL, 0);
+ if (IS_ERR(pdev)) {
+ free_netdev(dev);
+ continue;
+ }
err = setup_card(dev, &pdev->dev);
if (!err) {
proteon_dev[i] = pdev;
@@ -385,9 +389,10 @@ static int __init proteon_init(void)
/* Probe for cards. */
if (num == 0) {
printk(KERN_NOTICE "proteon.c: No cards found.\n");
- return (-ENODEV);
+ platform_driver_unregister(&proteon_driver);
+ return -ENODEV;
}
- return (0);
+ return 0;
}
static void __exit proteon_cleanup(void)
diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c
index d6ba41c..33afea3 100644
--- a/drivers/net/tokenring/skisa.c
+++ b/drivers/net/tokenring/skisa.c
@@ -380,6 +380,10 @@ static int __init sk_isa_init(void)
dev->dma = dma[i];
pdev = platform_device_register_simple("skisa",
i, NULL, 0);
+ if (IS_ERR(pdev)) {
+ free_netdev(dev);
+ continue;
+ }
err = setup_card(dev, &pdev->dev);
if (!err) {
sk_isa_dev[i] = pdev;
@@ -395,9 +399,10 @@ static int __init sk_isa_init(void)
/* Probe for cards. */
if (num == 0) {
printk(KERN_NOTICE "skisa.c: No cards found.\n");
- return (-ENODEV);
+ platform_driver_unregister(&sk_isa_driver);
+ return -ENODEV;
}
- return (0);
+ return 0;
}
static void __exit sk_isa_cleanup(void)
diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c
index dcf46ad..5c322df 100644
--- a/drivers/net/wan/n2.c
+++ b/drivers/net/wan/n2.c
@@ -500,7 +500,7 @@ static int __init n2_init(void)
#ifdef MODULE
printk(KERN_INFO "n2: no card initialized\n");
#endif
- return -ENOSYS; /* no parameters specified, abort */
+ return -EINVAL; /* no parameters specified, abort */
}
printk(KERN_INFO "%s\n", version);
@@ -538,11 +538,11 @@ static int __init n2_init(void)
n2_run(io, irq, ram, valid[0], valid[1]);
if (*hw == '\x0')
- return first_card ? 0 : -ENOSYS;
+ return first_card ? 0 : -EINVAL;
}while(*hw++ == ':');
printk(KERN_ERR "n2: invalid hardware parameters\n");
- return first_card ? 0 : -ENOSYS;
+ return first_card ? 0 : -EINVAL;
}
OpenPOWER on IntegriCloud