diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/media/video/cx88/cx88-alsa.c | 42 | ||||
| -rw-r--r-- | drivers/media/video/cx88/cx88-reg.h | 13 |
2 files changed, 33 insertions, 22 deletions
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index 76a8c01..ecb9a74 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -136,12 +136,11 @@ static int _cx88_start_audio_dma(snd_cx88_card_t *chip) struct cx88_core *core=chip->core; struct sram_channel *audio_ch = &cx88_sram_channels[SRAM_CH25]; - - dprintk(1, "Starting audio DMA for %i bytes/line and %i (%i) lines at address %08x\n",buf->bpl, chip->num_periods, audio_ch->fifo_size / buf->bpl, audio_ch->fifo_start); + /* Make sure RISC/FIFO are off before changing FIFO/RISC settings */ + cx_clear(MO_AUD_DMACNTRL, 0x11); /* setup fifo + format - out channel */ - cx88_sram_channel_setup(chip->core, &cx88_sram_channels[SRAM_CH25], - buf->bpl, buf->risc.dma); + cx88_sram_channel_setup(chip->core, audio_ch, buf->bpl, buf->risc.dma); /* sets bpl size */ cx_write(MO_AUDD_LNGTH, buf->bpl); @@ -149,27 +148,30 @@ static int _cx88_start_audio_dma(snd_cx88_card_t *chip) /* reset counter */ cx_write(MO_AUDD_GPCNTRL,GP_COUNT_CONTROL_RESET); + dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d lines/irq, " + "%d B/irq\n", buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1, + chip->num_periods, buf->bpl * chip->num_periods); + dprintk(1, "Enabling IRQ, setting mask from 0x%x to 0x%x\n", chip->core->pci_irqmask, chip->core->pci_irqmask | PCI_INT_AUDINT); - /* enable irqs */ - cx_set(MO_PCI_INTMSK, chip->core->pci_irqmask | PCI_INT_AUDINT); - /* Enables corresponding bits at AUD_INT_STAT */ - cx_write(MO_AUD_INTMSK, - (1<<16)| - (1<<12)| - (1<<4)| - (1<<0) - ); + cx_write(MO_AUD_INTMSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC | + AUD_INT_DN_RISCI2 | AUD_INT_DN_RISCI1); + + /* Clean any pending interrupt bits already set */ + cx_write(MO_AUD_INTSTAT, ~0); + + /* enable audio irqs */ + cx_set(MO_PCI_INTMSK, chip->core->pci_irqmask | PCI_INT_AUDINT); /* start dma */ cx_set(MO_DEV_CNTRL2, (1<<5)); /* Enables Risc Processor */ cx_set(MO_AUD_DMACNTRL, 0x11); /* audio downstream FIFO and RISC enable */ if (debug) - cx88_sram_channel_dump(chip->core, &cx88_sram_channels[SRAM_CH25]); + cx88_sram_channel_dump(chip->core, audio_ch); return 0; } @@ -187,12 +189,8 @@ static int _cx88_stop_audio_dma(snd_cx88_card_t *chip) /* disable irqs */ cx_clear(MO_PCI_INTMSK, PCI_INT_AUDINT); - cx_clear(MO_AUD_INTMSK, - (1<<16)| - (1<<12)| - (1<<4)| - (1<<0) - ); + cx_clear(MO_AUD_INTMSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC | + AUD_INT_DN_RISCI2 | AUD_INT_DN_RISCI1); if (debug) cx88_sram_channel_dump(chip->core, &cx88_sram_channels[SRAM_CH25]); @@ -239,14 +237,14 @@ static void cx8801_aud_irq(snd_cx88_card_t *chip) cx88_aud_irqs, ARRAY_SIZE(cx88_aud_irqs), status, mask); /* risc op code error */ - if (status & (1 << 16)) { + if (status & AUD_INT_OPC_ERR) { printk(KERN_WARNING "%s/0: audio risc op code error\n",core->name); cx_clear(MO_AUD_DMACNTRL, 0x11); cx88_sram_channel_dump(core, &cx88_sram_channels[SRAM_CH25]); } /* risc1 downstream */ - if (status & 0x01) { + if (status & AUD_INT_DN_RISCI1) { spin_lock(&chip->reg_lock); count = cx_read(MO_AUDD_GPCNT); spin_unlock(&chip->reg_lock); diff --git a/drivers/media/video/cx88/cx88-reg.h b/drivers/media/video/cx88/cx88-reg.h index 2b1d102..2ec52d1 100644 --- a/drivers/media/video/cx88/cx88-reg.h +++ b/drivers/media/video/cx88/cx88-reg.h @@ -612,6 +612,19 @@ #define SEL_FMRADIO 0x20 // AUD_CTL +#define AUD_INT_DN_RISCI1 (1 << 0) +#define AUD_INT_UP_RISCI1 (1 << 1) +#define AUD_INT_RDS_DN_RISCI1 (1 << 2) +#define AUD_INT_DN_RISCI2 (1 << 4) /* yes, 3 is skipped */ +#define AUD_INT_UP_RISCI2 (1 << 5) +#define AUD_INT_RDS_DN_RISCI2 (1 << 6) +#define AUD_INT_DN_SYNC (1 << 12) +#define AUD_INT_UP_SYNC (1 << 13) +#define AUD_INT_RDS_DN_SYNC (1 << 14) +#define AUD_INT_OPC_ERR (1 << 16) +#define AUD_INT_BER_IRQ (1 << 20) +#define AUD_INT_MCHG_IRQ (1 << 21) + #define EN_BTSC_FORCE_MONO 0 #define EN_BTSC_FORCE_STEREO 1 #define EN_BTSC_FORCE_SAP 2 |
