diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/pci/hotplug/shpchp_ctrl.c | 152 | ||||
-rw-r--r-- | drivers/pci/hotplug/shpchp_hpc.c | 466 |
2 files changed, 189 insertions, 429 deletions
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 10f3257..4e63814 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -198,7 +198,8 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot, dbg("%s: change to speed %d\n", __FUNCTION__, speed); if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) { - err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__); + err("%s: Issue of set bus speed mode command failed\n", + __FUNCTION__); return WRONG_BUS_FREQUENCY; } return rc; @@ -209,33 +210,26 @@ static int fix_bus_speed(struct controller *ctrl, struct slot *pslot, enum pci_bus_speed msp) { int rc = 0; - - if (flag != 0) { /* Other slots on the same bus are occupied */ - if ( asp < bsp ) { - err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bsp, asp); - return WRONG_BUS_FREQUENCY; + + /* + * If other slots on the same bus are occupied, we cannot + * change the bus speed. + */ + if (flag) { + if (asp < bsp) { + err("%s: speed of bus %x and adapter %x mismatch\n", + __FUNCTION__, bsp, asp); + rc = WRONG_BUS_FREQUENCY; } + return rc; + } + + if (asp < msp) { + if (bsp != asp) + rc = change_bus_speed(ctrl, pslot, asp); } else { - /* Other slots on the same bus are empty */ - if (msp == bsp) { - /* if adapter_speed >= bus_speed, do nothing */ - if (asp < bsp) { - /* - * Try to lower bus speed to accommodate the adapter if other slots - * on the same controller are empty - */ - if ((rc = change_bus_speed(ctrl, pslot, asp))) - return rc; - } - } else { - if (asp < msp) { - if ((rc = change_bus_speed(ctrl, pslot, asp))) - return rc; - } else { - if ((rc = change_bus_speed(ctrl, pslot, msp))) - return rc; - } - } + if (bsp != msp) + rc = change_bus_speed(ctrl, pslot, msp); } return rc; } @@ -252,8 +246,7 @@ static int board_added(struct slot *p_slot) u8 hp_slot; u8 slots_not_empty = 0; int rc = 0; - enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed; - u8 pi, mode; + enum pci_bus_speed asp, bsp, msp; struct controller *ctrl = p_slot->ctrl; hp_slot = p_slot->device - ctrl->slot_device_offset; @@ -285,109 +278,36 @@ static int board_added(struct slot *p_slot) } } - rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &adapter_speed); - /* 0 = PCI 33Mhz, 1 = PCI 66 Mhz, 2 = PCI-X 66 PA, 4 = PCI-X 66 ECC, */ - /* 5 = PCI-X 133 PA, 7 = PCI-X 133 ECC, 0xa = PCI-X 133 Mhz 266, */ - /* 0xd = PCI-X 133 Mhz 533 */ - /* This encoding is different from the one used in cur_bus_speed & */ - /* max_bus_speed */ - - if (rc || adapter_speed == PCI_SPEED_UNKNOWN) { - err("%s: Can't get adapter speed or bus mode mismatch\n", __FUNCTION__); + rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp); + if (rc) { + err("%s: Can't get adapter speed or bus mode mismatch\n", + __FUNCTION__); return WRONG_BUS_FREQUENCY; } - rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bus_speed); - if (rc || bus_speed == PCI_SPEED_UNKNOWN) { + rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp); + if (rc) { err("%s: Can't get bus operation speed\n", __FUNCTION__); return WRONG_BUS_FREQUENCY; } - rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &max_bus_speed); - if (rc || max_bus_speed == PCI_SPEED_UNKNOWN) { + rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp); + if (rc) { err("%s: Can't get max bus operation speed\n", __FUNCTION__); - max_bus_speed = bus_speed; - } - - if ((rc = p_slot->hpc_ops->get_prog_int(p_slot, &pi))) { - err("%s: Can't get controller programming interface, set it to 1\n", __FUNCTION__); - pi = 1; + msp = bsp; } /* Check if there are other slots or devices on the same bus */ if (!list_empty(&ctrl->pci_dev->subordinate->devices)) slots_not_empty = 1; - dbg("%s: slots_not_empty %d, pi %d\n", __FUNCTION__, - slots_not_empty, pi); - dbg("adapter_speed %d, bus_speed %d, max_bus_speed %d\n", - adapter_speed, bus_speed, max_bus_speed); - - if (pi == 2) { - dbg("%s: In PI = %d\n", __FUNCTION__, pi); - if ((rc = p_slot->hpc_ops->get_mode1_ECC_cap(p_slot, &mode))) { - err("%s: Can't get Mode1_ECC, set mode to 0\n", __FUNCTION__); - mode = 0; - } + dbg("%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, " + "max_bus_speed %d\n", __FUNCTION__, slots_not_empty, asp, + bsp, msp); - switch (adapter_speed) { - case PCI_SPEED_133MHz_PCIX_533: - case PCI_SPEED_133MHz_PCIX_266: - if ((bus_speed != adapter_speed) && - ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) - return rc; - break; - case PCI_SPEED_133MHz_PCIX_ECC: - case PCI_SPEED_133MHz_PCIX: - if (mode) { /* Bus - Mode 1 ECC */ - if ((bus_speed != 0x7) && - ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) - return rc; - } else { - if ((bus_speed != 0x4) && - ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) - return rc; - } - break; - case PCI_SPEED_66MHz_PCIX_ECC: - case PCI_SPEED_66MHz_PCIX: - if (mode) { /* Bus - Mode 1 ECC */ - if ((bus_speed != 0x5) && - ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) - return rc; - } else { - if ((bus_speed != 0x2) && - ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) - return rc; - } - break; - case PCI_SPEED_66MHz: - if ((bus_speed != 0x1) && - ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) - return rc; - break; - case PCI_SPEED_33MHz: - if (bus_speed > 0x0) { - if (slots_not_empty == 0) { - if ((rc = change_bus_speed(ctrl, p_slot, adapter_speed))) - return rc; - } else { - err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed); - return WRONG_BUS_FREQUENCY; - } - } - break; - default: - err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed); - return WRONG_BUS_FREQUENCY; - } - } else { - /* If adpater_speed == bus_speed, nothing to do here */ - dbg("%s: In PI = %d\n", __FUNCTION__, pi); - if ((adapter_speed != bus_speed) && - ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) - return rc; - } + rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp); + if (rc) + return rc; /* turn on board, blink green LED, turn off Amber LED */ if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) { diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index b392606..66123cf 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -82,31 +82,6 @@ #define SLOT_100MHZ_PCIX_533 0x0f000000 #define SLOT_133MHZ_PCIX_533 0xf0000000 - -/* Secondary Bus Configuration Register */ -/* For PI = 1, Bits 0 to 2 have been encoded as follows to show current bus speed/mode */ -#define PCI_33MHZ 0x0 -#define PCI_66MHZ 0x1 -#define PCIX_66MHZ 0x2 -#define PCIX_100MHZ 0x3 -#define PCIX_133MHZ 0x4 - -/* For PI = 2, Bits 0 to 3 have been encoded as follows to show current bus speed/mode */ -#define PCI_33MHZ 0x0 -#define PCI_66MHZ 0x1 -#define PCIX_66MHZ 0x2 -#define PCIX_100MHZ 0x3 -#define PCIX_133MHZ 0x4 -#define PCIX_66MHZ_ECC 0x5 -#define PCIX_100MHZ_ECC 0x6 -#define PCIX_133MHZ_ECC 0x7 -#define PCIX_66MHZ_266 0x9 -#define PCIX_100MHZ_266 0xa -#define PCIX_133MHZ_266 0xb -#define PCIX_66MHZ_533 0x11 -#define PCIX_100MHZ_533 0x12 -#define PCIX_133MHZ_533 0x13 - /* Slot Configuration */ #define SLOT_NUM 0x0000001F #define FIRST_DEV_NUM 0x00001F00 @@ -548,81 +523,41 @@ static int hpc_get_prog_int(struct slot *slot, u8 *prog_int) static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) { - struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; - u32 slot_reg; - u16 slot_status, sec_bus_status; - u8 m66_cap, pcix_cap, pi; int retval = 0; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; + u32 slot_reg = readl(php_ctlr->creg + SLOT1 + 4 * slot->hp_slot); + u8 pcix_cap = (slot_reg >> 12) & 7; + u8 m66_cap = (slot_reg >> 9) & 1; DBG_ENTER_ROUTINE - if (!slot->ctrl->hpc_ctlr_handle) { - err("%s: Invalid HPC controller handle!\n", __FUNCTION__); - return -1; - } - - if (slot->hp_slot >= php_ctlr->num_slots) { - err("%s: Invalid HPC slot number!\n", __FUNCTION__); - return -1; - } - - pi = readb(php_ctlr->creg + PROG_INTERFACE); - slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); - dbg("%s: pi = %d, slot_reg = %x\n", __FUNCTION__, pi, slot_reg); - slot_status = (u16) slot_reg; - dbg("%s: slot_status = %x\n", __FUNCTION__, slot_status); - sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG); - - pcix_cap = (u8) ((slot_status & 0x3000) >> 12); - dbg("%s: pcix_cap = %x\n", __FUNCTION__, pcix_cap); - m66_cap = (u8) ((slot_status & 0x0200) >> 9); - dbg("%s: m66_cap = %x\n", __FUNCTION__, m66_cap); + dbg("%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n", + __FUNCTION__, slot_reg, pcix_cap, m66_cap); - - if (pi == 2) { - switch (pcix_cap) { - case 0: - *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; - break; - case 1: - *value = PCI_SPEED_66MHz_PCIX; - break; - case 3: - *value = PCI_SPEED_133MHz_PCIX; - break; - case 4: - *value = PCI_SPEED_133MHz_PCIX_266; - break; - case 5: - *value = PCI_SPEED_133MHz_PCIX_533; - break; - case 2: /* Reserved */ - default: - *value = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - break; - } - } else { - switch (pcix_cap) { - case 0: - *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; - break; - case 1: - *value = PCI_SPEED_66MHz_PCIX; - break; - case 3: - *value = PCI_SPEED_133MHz_PCIX; - break; - case 2: /* Reserved */ - default: - *value = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - break; - } + switch (pcix_cap) { + case 0x0: + *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; + break; + case 0x1: + *value = PCI_SPEED_66MHz_PCIX; + break; + case 0x3: + *value = PCI_SPEED_133MHz_PCIX; + break; + case 0x4: + *value = PCI_SPEED_133MHz_PCIX_266; + break; + case 0x5: + *value = PCI_SPEED_133MHz_PCIX_533; + break; + case 0x2: + default: + *value = PCI_SPEED_UNKNOWN; + retval = -ENODEV; + break; } dbg("Adapter speed = %d\n", *value); - DBG_LEAVE_ROUTINE return retval; } @@ -965,98 +900,66 @@ static int hpc_slot_disable(struct slot * slot) static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) { - u8 slot_cmd; - u8 pi; - int retval = 0; + int retval; struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; + u8 pi, cmd; DBG_ENTER_ROUTINE - - if (!slot->ctrl->hpc_ctlr_handle) { - err("%s: Invalid HPC controller handle!\n", __FUNCTION__); - return -1; - } pi = readb(php_ctlr->creg + PROG_INTERFACE); - - if (pi == 1) { - switch (value) { - case 0: - slot_cmd = SETA_PCI_33MHZ; - break; - case 1: - slot_cmd = SETA_PCI_66MHZ; - break; - case 2: - slot_cmd = SETA_PCIX_66MHZ; - break; - case 3: - slot_cmd = SETA_PCIX_100MHZ; - break; - case 4: - slot_cmd = SETA_PCIX_133MHZ; - break; - default: - slot_cmd = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - return retval; - } - } else { - switch (value) { - case 0: - slot_cmd = SETB_PCI_33MHZ; - break; - case 1: - slot_cmd = SETB_PCI_66MHZ; - break; - case 2: - slot_cmd = SETB_PCIX_66MHZ_PM; - break; - case 3: - slot_cmd = SETB_PCIX_100MHZ_PM; - break; - case 4: - slot_cmd = SETB_PCIX_133MHZ_PM; - break; - case 5: - slot_cmd = SETB_PCIX_66MHZ_EM; - break; - case 6: - slot_cmd = SETB_PCIX_100MHZ_EM; - break; - case 7: - slot_cmd = SETB_PCIX_133MHZ_EM; - break; - case 8: - slot_cmd = SETB_PCIX_66MHZ_266; - break; - case 0x9: - slot_cmd = SETB_PCIX_100MHZ_266; - break; - case 0xa: - slot_cmd = SETB_PCIX_133MHZ_266; - break; - case 0xb: - slot_cmd = SETB_PCIX_66MHZ_533; - break; - case 0xc: - slot_cmd = SETB_PCIX_100MHZ_533; - break; - case 0xd: - slot_cmd = SETB_PCIX_133MHZ_533; - break; - default: - slot_cmd = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - return retval; - } + if ((pi == 1) && (value > PCI_SPEED_133MHz_PCIX)) + return -EINVAL; + switch (value) { + case PCI_SPEED_33MHz: + cmd = SETA_PCI_33MHZ; + break; + case PCI_SPEED_66MHz: + cmd = SETA_PCI_66MHZ; + break; + case PCI_SPEED_66MHz_PCIX: + cmd = SETA_PCIX_66MHZ; + break; + case PCI_SPEED_100MHz_PCIX: + cmd = SETA_PCIX_100MHZ; + break; + case PCI_SPEED_133MHz_PCIX: + cmd = SETA_PCIX_133MHZ; + break; + case PCI_SPEED_66MHz_PCIX_ECC: + cmd = SETB_PCIX_66MHZ_EM; + break; + case PCI_SPEED_100MHz_PCIX_ECC: + cmd = SETB_PCIX_100MHZ_EM; + break; + case PCI_SPEED_133MHz_PCIX_ECC: + cmd = SETB_PCIX_133MHZ_EM; + break; + case PCI_SPEED_66MHz_PCIX_266: + cmd = SETB_PCIX_66MHZ_266; + break; + case PCI_SPEED_100MHz_PCIX_266: + cmd = SETB_PCIX_100MHZ_266; + break; + case PCI_SPEED_133MHz_PCIX_266: + cmd = SETB_PCIX_133MHZ_266; + break; + case PCI_SPEED_66MHz_PCIX_533: + cmd = SETB_PCIX_66MHZ_533; + break; + case PCI_SPEED_100MHz_PCIX_533: + cmd = SETB_PCIX_100MHZ_533; + break; + case PCI_SPEED_133MHz_PCIX_533: + cmd = SETB_PCIX_133MHZ_533; + break; + default: + return -EINVAL; } - retval = shpc_write_cmd(slot, 0, slot_cmd); - if (retval) { + + retval = shpc_write_cmd(slot, 0, cmd); + if (retval) err("%s: Write command failed!\n", __FUNCTION__); - return -1; - } DBG_LEAVE_ROUTINE return retval; @@ -1163,64 +1066,43 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) { + int retval = 0; struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; - int retval = 0; - u8 pi; - u32 slot_avail1, slot_avail2; + u8 pi = readb(php_ctlr->creg + PROG_INTERFACE); + u32 slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1); + u32 slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2); DBG_ENTER_ROUTINE - if (!slot->ctrl->hpc_ctlr_handle) { - err("%s: Invalid HPC controller handle!\n", __FUNCTION__); - return -1; - } - - if (slot->hp_slot >= php_ctlr->num_slots) { - err("%s: Invalid HPC slot number!\n", __FUNCTION__); - return -1; - } - - pi = readb(php_ctlr->creg + PROG_INTERFACE); - slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1); - slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2); - if (pi == 2) { if (slot_avail2 & SLOT_133MHZ_PCIX_533) - bus_speed = PCIX_133MHZ_533; + bus_speed = PCI_SPEED_133MHz_PCIX_533; else if (slot_avail2 & SLOT_100MHZ_PCIX_533) - bus_speed = PCIX_100MHZ_533; + bus_speed = PCI_SPEED_100MHz_PCIX_533; else if (slot_avail2 & SLOT_66MHZ_PCIX_533) - bus_speed = PCIX_66MHZ_533; + bus_speed = PCI_SPEED_66MHz_PCIX_533; else if (slot_avail2 & SLOT_133MHZ_PCIX_266) - bus_speed = PCIX_133MHZ_266; + bus_speed = PCI_SPEED_133MHz_PCIX_266; else if (slot_avail2 & SLOT_100MHZ_PCIX_266) - bus_speed = PCIX_100MHZ_266; + bus_speed = PCI_SPEED_100MHz_PCIX_266; else if (slot_avail2 & SLOT_66MHZ_PCIX_266) - bus_speed = PCIX_66MHZ_266; - else if (slot_avail1 & SLOT_133MHZ_PCIX) - bus_speed = PCIX_133MHZ; - else if (slot_avail1 & SLOT_100MHZ_PCIX) - bus_speed = PCIX_100MHZ; - else if (slot_avail1 & SLOT_66MHZ_PCIX) - bus_speed = PCIX_66MHZ; - else if (slot_avail2 & SLOT_66MHZ) - bus_speed = PCI_66MHZ; - else if (slot_avail1 & SLOT_33MHZ) - bus_speed = PCI_33MHZ; - else bus_speed = PCI_SPEED_UNKNOWN; - } else { + bus_speed = PCI_SPEED_66MHz_PCIX_266; + } + + if (bus_speed == PCI_SPEED_UNKNOWN) { if (slot_avail1 & SLOT_133MHZ_PCIX) - bus_speed = PCIX_133MHZ; + bus_speed = PCI_SPEED_133MHz_PCIX; else if (slot_avail1 & SLOT_100MHZ_PCIX) - bus_speed = PCIX_100MHZ; + bus_speed = PCI_SPEED_100MHz_PCIX; else if (slot_avail1 & SLOT_66MHZ_PCIX) - bus_speed = PCIX_66MHZ; + bus_speed = PCI_SPEED_66MHz_PCIX; else if (slot_avail2 & SLOT_66MHZ) - bus_speed = PCI_66MHZ; + bus_speed = PCI_SPEED_66MHz; else if (slot_avail1 & SLOT_33MHZ) - bus_speed = PCI_33MHZ; - else bus_speed = PCI_SPEED_UNKNOWN; + bus_speed = PCI_SPEED_33MHz; + else + retval = -ENODEV; } *value = bus_speed; @@ -1231,111 +1113,69 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) { + int retval = 0; struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; - u16 sec_bus_status; - int retval = 0; - u8 pi; + u16 sec_bus_reg = readw(php_ctlr->creg + SEC_BUS_CONFIG); + u8 pi = readb(php_ctlr->creg + PROG_INTERFACE); + u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); DBG_ENTER_ROUTINE - if (!slot->ctrl->hpc_ctlr_handle) { - err("%s: Invalid HPC controller handle!\n", __FUNCTION__); - return -1; - } - - if (slot->hp_slot >= php_ctlr->num_slots) { - err("%s: Invalid HPC slot number!\n", __FUNCTION__); - return -1; + if ((pi == 1) && (speed_mode > 4)) { + *value = PCI_SPEED_UNKNOWN; + return -ENODEV; } - pi = readb(php_ctlr->creg + PROG_INTERFACE); - sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG); - - if (pi == 2) { - switch (sec_bus_status & 0x000f) { - case 0: - bus_speed = PCI_SPEED_33MHz; - break; - case 1: - bus_speed = PCI_SPEED_66MHz; - break; - case 2: - bus_speed = PCI_SPEED_66MHz_PCIX; - break; - case 3: - bus_speed = PCI_SPEED_100MHz_PCIX; - break; - case 4: - bus_speed = PCI_SPEED_133MHz_PCIX; - break; - case 5: - bus_speed = PCI_SPEED_66MHz_PCIX_ECC; - break; - case 6: - bus_speed = PCI_SPEED_100MHz_PCIX_ECC; - break; - case 7: - bus_speed = PCI_SPEED_133MHz_PCIX_ECC; - break; - case 8: - bus_speed = PCI_SPEED_66MHz_PCIX_266; - break; - case 9: - bus_speed = PCI_SPEED_100MHz_PCIX_266; - break; - case 0xa: - bus_speed = PCI_SPEED_133MHz_PCIX_266; - break; - case 0xb: - bus_speed = PCI_SPEED_66MHz_PCIX_533; - break; - case 0xc: - bus_speed = PCI_SPEED_100MHz_PCIX_533; - break; - case 0xd: - bus_speed = PCI_SPEED_133MHz_PCIX_533; - break; - case 0xe: - case 0xf: - default: - bus_speed = PCI_SPEED_UNKNOWN; - break; - } - } else { - /* In the case where pi is undefined, default it to 1 */ - switch (sec_bus_status & 0x0007) { - case 0: - bus_speed = PCI_SPEED_33MHz; - break; - case 1: - bus_speed = PCI_SPEED_66MHz; - break; - case 2: - bus_speed = PCI_SPEED_66MHz_PCIX; - break; - case 3: - bus_speed = PCI_SPEED_100MHz_PCIX; - break; - case 4: - bus_speed = PCI_SPEED_133MHz_PCIX; - break; - case 5: - bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ - break; - case 6: - bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ - break; - case 7: - bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ - break; - default: - bus_speed = PCI_SPEED_UNKNOWN; - break; - } + switch (speed_mode) { + case 0x0: + *value = PCI_SPEED_33MHz; + break; + case 0x1: + *value = PCI_SPEED_66MHz; + break; + case 0x2: + *value = PCI_SPEED_66MHz_PCIX; + break; + case 0x3: + *value = PCI_SPEED_100MHz_PCIX; + break; + case 0x4: + *value = PCI_SPEED_133MHz_PCIX; + break; + case 0x5: + *value = PCI_SPEED_66MHz_PCIX_ECC; + break; + case 0x6: + *value = PCI_SPEED_100MHz_PCIX_ECC; + break; + case 0x7: + *value = PCI_SPEED_133MHz_PCIX_ECC; + break; + case 0x8: + *value = PCI_SPEED_66MHz_PCIX_266; + break; + case 0x9: + *value = PCI_SPEED_100MHz_PCIX_266; + break; + case 0xa: + *value = PCI_SPEED_133MHz_PCIX_266; + break; + case 0xb: + *value = PCI_SPEED_66MHz_PCIX_533; + break; + case 0xc: + *value = PCI_SPEED_100MHz_PCIX_533; + break; + case 0xd: + *value = PCI_SPEED_133MHz_PCIX_533; + break; + default: + *value = PCI_SPEED_UNKNOWN; + retval = -ENODEV; + break; } - *value = bus_speed; dbg("Current bus speed = %d\n", bus_speed); DBG_LEAVE_ROUTINE return retval; |