summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/tg3.c37
-rw-r--r--drivers/net/tg3.h6
2 files changed, 39 insertions, 4 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 2b062d7..23f5744 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1035,6 +1035,24 @@ out:
phy_reg | MII_TG3_EXT_CTRL_FIFO_ELASTIC);
}
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ u32 phy_reg;
+
+ /* adjust output voltage */
+ tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x12);
+
+ if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &phy_reg)) {
+ u32 phy_reg2;
+
+ tg3_writephy(tp, MII_TG3_EPHY_TEST,
+ phy_reg | MII_TG3_EPHY_SHADOW_EN);
+ /* Enable auto-MDIX */
+ if (!tg3_readphy(tp, 0x10, &phy_reg2))
+ tg3_writephy(tp, 0x10, phy_reg2 | 0x4000);
+ tg3_writephy(tp, MII_TG3_EPHY_TEST, phy_reg);
+ }
+ }
+
tg3_phy_set_wirespeed(tp);
return 0;
}
@@ -1151,8 +1169,11 @@ static void tg3_power_down_phy(struct tg3 *tp)
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
return;
- tg3_writephy(tp, MII_TG3_EXT_CTRL, MII_TG3_EXT_CTRL_FORCE_LED_OFF);
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
+ tg3_writephy(tp, MII_TG3_EXT_CTRL,
+ MII_TG3_EXT_CTRL_FORCE_LED_OFF);
+ tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
+ }
/* The PHY should not be powered down on some chips because
* of bugs.
@@ -1505,6 +1526,13 @@ static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8
break;
default:
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ *speed = (val & MII_TG3_AUX_STAT_100) ? SPEED_100 :
+ SPEED_10;
+ *duplex = (val & MII_TG3_AUX_STAT_FULL) ? DUPLEX_FULL :
+ DUPLEX_HALF;
+ break;
+ }
*speed = SPEED_INVALID;
*duplex = DUPLEX_INVALID;
break;
@@ -1787,7 +1815,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
if (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT)
tg3_writephy(tp, MII_TG3_IMASK, ~MII_TG3_INT_LINKCHG);
- else
+ else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
tg3_writephy(tp, MII_TG3_IMASK, ~0);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
@@ -6552,7 +6580,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
if (err)
return err;
- if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
+ if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
u32 tmp;
/* Clear CRC stats. */
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 2f5e00c..9259d12 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1624,6 +1624,7 @@
#define MII_TG3_DSP_RW_PORT 0x15 /* DSP coefficient read/write port */
#define MII_TG3_DSP_ADDRESS 0x17 /* DSP address register */
+#define MII_TG3_EPHY_PTEST 0x17 /* 5906 PHY register */
#define MII_TG3_AUX_CTRL 0x18 /* auxilliary control register */
@@ -1637,6 +1638,8 @@
#define MII_TG3_AUX_STAT_100FULL 0x0500
#define MII_TG3_AUX_STAT_1000HALF 0x0600
#define MII_TG3_AUX_STAT_1000FULL 0x0700
+#define MII_TG3_AUX_STAT_100 0x0008
+#define MII_TG3_AUX_STAT_FULL 0x0001
#define MII_TG3_ISTAT 0x1a /* IRQ status register */
#define MII_TG3_IMASK 0x1b /* IRQ mask register */
@@ -1647,6 +1650,9 @@
#define MII_TG3_INT_DUPLEXCHG 0x0008
#define MII_TG3_INT_ANEG_PAGE_RX 0x0400
+#define MII_TG3_EPHY_TEST 0x1f /* 5906 PHY register */
+#define MII_TG3_EPHY_SHADOW_EN 0x80
+
/* There are two ways to manage the TX descriptors on the tigon3.
* Either the descriptors are in host DMA'able memory, or they
* exist only in the cards on-chip SRAM. All 16 send bds are under
OpenPOWER on IntegriCloud